During a warm reset via kexec, the system bypasses the driver removal sequence, meaning that the remove() callback is not invoked. If a QAT device is not shutdown properly, the device driver will fail to load in a newly rebooted kernel.

This might result in output like the following after the kexec reboot:

QAT: AE0 is inactive!! QAT: failed to get device out of reset dh895xcc 0000:3f:00.0: qat_hal_clr_reset error dh895xcc 0000:3f:00.0: Failed to init the AEs dh895xcc 0000:3f:00.0: Failed to initialise Acceleration Engine dh895xcc 0000:3f:00.0: Resetting device qat_dev0 dh895xcc 0000:3f:00.0: probe with driver dh895xcc failed with error -14

Implement the shutdown() handler that hooks into the reboot notifier list. This brings down the QAT device and ensures it is shut down properly.

Cc: stable@vger.kernel.org Fixes: 7afa232e76ce ("crypto: qat - Intel(R) QAT DH895xcc accelerator") Reviewed-by: Ahsan Atta ahsan.atta@intel.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Giovanni Cabiddu giovanni.cabiddu@intel.com --- drivers/crypto/intel/qat/qat_dh895xcc/adf_drv.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/drivers/crypto/intel/qat/qat_dh895xcc/adf_drv.c b/drivers/crypto/intel/qat/qat_dh895xcc/adf_drv.c index 730147404ceb..b59e0cc49e52 100644 --- a/drivers/crypto/intel/qat/qat_dh895xcc/adf_drv.c +++ b/drivers/crypto/intel/qat/qat_dh895xcc/adf_drv.c @@ -209,6 +209,13 @@ static void adf_remove(struct pci_dev *pdev) kfree(accel_dev); }

+static void adf_shutdown(struct pci_dev *pdev) +{ + struct adf_accel_dev *accel_dev = adf_devmgr_pci_to_accel_dev(pdev); + + adf_dev_down(accel_dev); +} + static const struct pci_device_id adf_pci_tbl[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_QAT_DH895XCC) }, { } @@ -220,6 +227,7 @@ static struct pci_driver adf_driver = { .name = ADF_DH895XCC_DEVICE_NAME, .probe = adf_probe, .remove = adf_remove, + .shutdown = adf_shutdown, .sriov_configure = adf_sriov_configure, .err_handler = &adf_err_handler, };