On IMX SoC's which support CMDQ the following can occur during high a high cpu load:
mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000 mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 mmc2: cqhci: TDL base: 0x8003f000 | TDL up32: 0x00000000 mmc2: cqhci: Doorbell: 0xbf01dfff | TCN: 0x00000000 mmc2: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x08000000 mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000800 mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 mmc2: cqhci: Resp idx: 0x0000000d | Resp arg: 0x00000000 mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== mmc2: sdhci: Sys addr: 0x7c722000 | Version: 0x00000002 mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000020 mmc2: sdhci: Argument: 0x00018000 | Trn mode: 0x00000023 mmc2: sdhci: Present: 0x01f88008 | Host ctl: 0x00000030 mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000502 mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 mmc2: sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0xffc003ff mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d07f01 mmc2: sdhci: Host ctl2: 0x00000088 mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0xfe179020 mmc2: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS DUMP ==== mmc2: sdhci-esdhc-imx: cmd debug status: 0x2120 mmc2: sdhci-esdhc-imx: data debug status: 0x2200 mmc2: sdhci-esdhc-imx: trans debug status: 0x2300 mmc2: sdhci-esdhc-imx: dma debug status: 0x2400 mmc2: sdhci-esdhc-imx: adma debug status: 0x2510 mmc2: sdhci-esdhc-imx: fifo debug status: 0x2680 mmc2: sdhci-esdhc-imx: async fifo debug status: 0x2750 mmc2: sdhci: ============================================
For now, disable CMDQ support on the imx8qm/imx8qxp/imx8mm until the issue is found and resolved.
Fixes: bb6e358169bf6 ("mmc: sdhci-esdhc-imx: add CMDQ support") Fixes: cde5e8e9ff146 ("mmc: sdhci-esdhc-imx: Add an new esdhc_soc_data for i.MX8MM")
Cc: stable@vger.kernel.org Signed-off-by: Tim Harvey tharvey@gateworks.com --- drivers/mmc/host/sdhci-esdhc-imx.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index e658f0174242..60f19369de84 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -300,7 +300,6 @@ static struct esdhc_soc_data usdhc_imx8qxp_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES - | ESDHC_FLAG_CQHCI | ESDHC_FLAG_STATE_LOST_IN_LPMODE | ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME, }; @@ -309,7 +308,6 @@ static struct esdhc_soc_data usdhc_imx8mm_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES - | ESDHC_FLAG_CQHCI | ESDHC_FLAG_STATE_LOST_IN_LPMODE, };
Hi Tim,
On Wed, Nov 3, 2021 at 1:54 PM Tim Harvey tharvey@gateworks.com wrote:
On IMX SoC's which support CMDQ the following can occur during high a high cpu load:
mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000 mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 mmc2: cqhci: TDL base: 0x8003f000 | TDL up32: 0x00000000 mmc2: cqhci: Doorbell: 0xbf01dfff | TCN: 0x00000000 mmc2: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x08000000 mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000800 mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 mmc2: cqhci: Resp idx: 0x0000000d | Resp arg: 0x00000000 mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== mmc2: sdhci: Sys addr: 0x7c722000 | Version: 0x00000002 mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000020 mmc2: sdhci: Argument: 0x00018000 | Trn mode: 0x00000023 mmc2: sdhci: Present: 0x01f88008 | Host ctl: 0x00000030 mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000502 mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 mmc2: sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0xffc003ff mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d07f01 mmc2: sdhci: Host ctl2: 0x00000088 mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0xfe179020 mmc2: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS DUMP ==== mmc2: sdhci-esdhc-imx: cmd debug status: 0x2120 mmc2: sdhci-esdhc-imx: data debug status: 0x2200 mmc2: sdhci-esdhc-imx: trans debug status: 0x2300 mmc2: sdhci-esdhc-imx: dma debug status: 0x2400 mmc2: sdhci-esdhc-imx: adma debug status: 0x2510 mmc2: sdhci-esdhc-imx: fifo debug status: 0x2680 mmc2: sdhci-esdhc-imx: async fifo debug status: 0x2750 mmc2: sdhci: ============================================
For now, disable CMDQ support on the imx8qm/imx8qxp/imx8mm until the issue is found and resolved.
Fixes: bb6e358169bf6 ("mmc: sdhci-esdhc-imx: add CMDQ support") Fixes: cde5e8e9ff146 ("mmc: sdhci-esdhc-imx: Add an new esdhc_soc_data for i.MX8MM")
Cc: stable@vger.kernel.org Signed-off-by: Tim Harvey tharvey@gateworks.com
It seem this is the best approach we can do at the moment, until the ESDHC_FLAG_CQHCI issue is debugged.
Reviewed-by: Fabio Estevam festevam@gmail.com
-----Original Message----- From: Tim Harvey [mailto:tharvey@gateworks.com] Sent: 2021年11月4日 0:54 To: Adrian Hunter adrian.hunter@intel.com; Ulf Hansson ulf.hansson@linaro.org; Shawn Guo shawnguo@kernel.org; Sascha Hauer s.hauer@pengutronix.de; Pengutronix Kernel Team kernel@pengutronix.de; Fabio Estevam festevam@gmail.com; dl-linux-imx linux-imx@nxp.com; Bough Chen haibo.chen@nxp.com; linux-mmc@vger.kernel.org; Marcel Ziswiler marcel@ziswiler.com; Schrempf Frieder frieder.schrempf@kontron.de; Adam Ford aford173@gmail.com; Lucas Stach l.stach@pengutronix.de; Peng Fan peng.fan@nxp.com Cc: tharvey@gateworks.com; stable@vger.kernel.org Subject: [PATCH] mmc: sdhci-esdhc-imx: disable CMDQ support
On IMX SoC's which support CMDQ the following can occur during high a high cpu load:
mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000 mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 mmc2: cqhci: TDL base: 0x8003f000 | TDL up32: 0x00000000 mmc2: cqhci: Doorbell: 0xbf01dfff | TCN: 0x00000000 mmc2: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x08000000 mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000800 mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 mmc2: cqhci: Resp idx: 0x0000000d | Resp arg: 0x00000000 mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== mmc2: sdhci: Sys addr: 0x7c722000 | Version: 0x00000002 mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000020 mmc2: sdhci: Argument: 0x00018000 | Trn mode: 0x00000023 mmc2: sdhci: Present: 0x01f88008 | Host ctl: 0x00000030 mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000502 mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 mmc2: sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0xffc003ff mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d07f01 mmc2: sdhci: Host ctl2: 0x00000088 mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0xfe179020 mmc2: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS DUMP ==== mmc2: sdhci-esdhc-imx: cmd debug status: 0x2120 mmc2: sdhci-esdhc-imx: data debug status: 0x2200 mmc2: sdhci-esdhc-imx: trans debug status: 0x2300 mmc2: sdhci-esdhc-imx: dma debug status: 0x2400 mmc2: sdhci-esdhc-imx: adma debug status: 0x2510 mmc2: sdhci-esdhc-imx: fifo debug status: 0x2680 mmc2: sdhci-esdhc-imx: async fifo debug status: 0x2750 mmc2: sdhci: ============================================
For now, disable CMDQ support on the imx8qm/imx8qxp/imx8mm until the issue is found and resolved.
Fixes: bb6e358169bf6 ("mmc: sdhci-esdhc-imx: add CMDQ support") Fixes: cde5e8e9ff146 ("mmc: sdhci-esdhc-imx: Add an new esdhc_soc_data for i.MX8MM")
Cc: stable@vger.kernel.org Signed-off-by: Tim Harvey tharvey@gateworks.com
Reviewed-by: Haibo Chen haibo.chen@nxp.com
Best Regards Haibo Chen
drivers/mmc/host/sdhci-esdhc-imx.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index e658f0174242..60f19369de84 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -300,7 +300,6 @@ static struct esdhc_soc_data usdhc_imx8qxp_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
| ESDHC_FLAG_CQHCI | ESDHC_FLAG_STATE_LOST_IN_LPMODE | ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME,}; @@ -309,7 +308,6 @@ static struct esdhc_soc_data usdhc_imx8mm_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
| ESDHC_FLAG_CQHCI | ESDHC_FLAG_STATE_LOST_IN_LPMODE,};
-- 2.17.1
On 03/11/2021 18:54, Tim Harvey wrote:
On IMX SoC's which support CMDQ the following can occur during high a high cpu load:
mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000 mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 mmc2: cqhci: TDL base: 0x8003f000 | TDL up32: 0x00000000 mmc2: cqhci: Doorbell: 0xbf01dfff | TCN: 0x00000000 mmc2: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x08000000 mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000800 mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 mmc2: cqhci: Resp idx: 0x0000000d | Resp arg: 0x00000000 mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== mmc2: sdhci: Sys addr: 0x7c722000 | Version: 0x00000002 mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000020 mmc2: sdhci: Argument: 0x00018000 | Trn mode: 0x00000023 mmc2: sdhci: Present: 0x01f88008 | Host ctl: 0x00000030 mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000502 mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 mmc2: sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0xffc003ff mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d07f01 mmc2: sdhci: Host ctl2: 0x00000088 mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0xfe179020 mmc2: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS DUMP ==== mmc2: sdhci-esdhc-imx: cmd debug status: 0x2120 mmc2: sdhci-esdhc-imx: data debug status: 0x2200 mmc2: sdhci-esdhc-imx: trans debug status: 0x2300 mmc2: sdhci-esdhc-imx: dma debug status: 0x2400 mmc2: sdhci-esdhc-imx: adma debug status: 0x2510 mmc2: sdhci-esdhc-imx: fifo debug status: 0x2680 mmc2: sdhci-esdhc-imx: async fifo debug status: 0x2750 mmc2: sdhci: ============================================
For now, disable CMDQ support on the imx8qm/imx8qxp/imx8mm until the issue is found and resolved.
Fixes: bb6e358169bf6 ("mmc: sdhci-esdhc-imx: add CMDQ support") Fixes: cde5e8e9ff146 ("mmc: sdhci-esdhc-imx: Add an new esdhc_soc_data for i.MX8MM")
Cc: stable@vger.kernel.org Signed-off-by: Tim Harvey tharvey@gateworks.com
Acked-by: Adrian Hunter adrian.hunter@intel.com
drivers/mmc/host/sdhci-esdhc-imx.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index e658f0174242..60f19369de84 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -300,7 +300,6 @@ static struct esdhc_soc_data usdhc_imx8qxp_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
| ESDHC_FLAG_CQHCI | ESDHC_FLAG_STATE_LOST_IN_LPMODE | ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME,}; @@ -309,7 +308,6 @@ static struct esdhc_soc_data usdhc_imx8mm_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
| ESDHC_FLAG_CQHCI | ESDHC_FLAG_STATE_LOST_IN_LPMODE,};
On Wed, 3 Nov 2021 at 17:54, Tim Harvey tharvey@gateworks.com wrote:
On IMX SoC's which support CMDQ the following can occur during high a high cpu load:
mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000 mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 mmc2: cqhci: TDL base: 0x8003f000 | TDL up32: 0x00000000 mmc2: cqhci: Doorbell: 0xbf01dfff | TCN: 0x00000000 mmc2: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x08000000 mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000800 mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 mmc2: cqhci: Resp idx: 0x0000000d | Resp arg: 0x00000000 mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== mmc2: sdhci: Sys addr: 0x7c722000 | Version: 0x00000002 mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000020 mmc2: sdhci: Argument: 0x00018000 | Trn mode: 0x00000023 mmc2: sdhci: Present: 0x01f88008 | Host ctl: 0x00000030 mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000502 mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 mmc2: sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0xffc003ff mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d07f01 mmc2: sdhci: Host ctl2: 0x00000088 mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0xfe179020 mmc2: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS DUMP ==== mmc2: sdhci-esdhc-imx: cmd debug status: 0x2120 mmc2: sdhci-esdhc-imx: data debug status: 0x2200 mmc2: sdhci-esdhc-imx: trans debug status: 0x2300 mmc2: sdhci-esdhc-imx: dma debug status: 0x2400 mmc2: sdhci-esdhc-imx: adma debug status: 0x2510 mmc2: sdhci-esdhc-imx: fifo debug status: 0x2680 mmc2: sdhci-esdhc-imx: async fifo debug status: 0x2750 mmc2: sdhci: ============================================
For now, disable CMDQ support on the imx8qm/imx8qxp/imx8mm until the issue is found and resolved.
Fixes: bb6e358169bf6 ("mmc: sdhci-esdhc-imx: add CMDQ support") Fixes: cde5e8e9ff146 ("mmc: sdhci-esdhc-imx: Add an new esdhc_soc_data for i.MX8MM")
Cc: stable@vger.kernel.org Signed-off-by: Tim Harvey tharvey@gateworks.com
Applied for fixes, thanks!
Kind regards Uffe
drivers/mmc/host/sdhci-esdhc-imx.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index e658f0174242..60f19369de84 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -300,7 +300,6 @@ static struct esdhc_soc_data usdhc_imx8qxp_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
| ESDHC_FLAG_CQHCI | ESDHC_FLAG_STATE_LOST_IN_LPMODE | ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME,}; @@ -309,7 +308,6 @@ static struct esdhc_soc_data usdhc_imx8mm_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
| ESDHC_FLAG_CQHCI | ESDHC_FLAG_STATE_LOST_IN_LPMODE,};
-- 2.17.1
linux-stable-mirror@lists.linaro.org
-
Adrian Hunter -
Bough Chen -
Fabio Estevam -
Tim Harvey -
Ulf Hansson