From: Geert Uytterhoeven geert@linux-m68k.org
[ Upstream commit e0484010ec05191a8edf980413fc92f28050c1cc ]
On sparc32, tcflag_t is "unsigned long", unlike on all other architectures, where it is "unsigned int":
drivers/net/usb/hso.c: In function ‘hso_serial_set_termios’: include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 4 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=] drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’ hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n", ^~~~~~~ include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 5 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=] drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’ hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n", ^~~~~~~
As "unsigned long" is 32-bit on sparc32, fix this by casting all tcflag_t parameters to "unsigned int". While at it, use "%u" to format unsigned numbers.
Signed-off-by: Geert Uytterhoeven geert@linux-m68k.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/hso.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 27fc699d8be5b..2ae30db06bfa1 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1404,8 +1404,9 @@ static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old) unsigned long flags;
if (old) - hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n", - tty->termios.c_cflag, old->c_cflag); + hso_dbg(0x16, "Termios called with: cflags new[%u] - old[%u]\n", + (unsigned int)tty->termios.c_cflag, + (unsigned int)old->c_cflag);
/* the actual setup */ spin_lock_irqsave(&serial->serial_lock, flags);
From: Laurence Oberman loberman@redhat.com
[ Upstream commit 1d61e21852d3161f234b9656797669fe185c251b ]
This is likely firmware causing this but its starting to annoy customers. Change the message level to verbose to prevent the spam. Note that this seems to only show up with ISCSI enabled on the HBA via the qedi driver.
Signed-off-by: Laurence Oberman loberman@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qed/qed_int.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c index fd19372db2f86..6e1d38041d0ac 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_int.c +++ b/drivers/net/ethernet/qlogic/qed/qed_int.c @@ -2158,7 +2158,8 @@ static int qed_int_attentions(struct qed_hwfn *p_hwfn) index, attn_bits, attn_acks, asserted_bits, deasserted_bits, p_sb_attn_sw->known_attn); } else if (asserted_bits == 0x100) { - DP_INFO(p_hwfn, "MFW indication via attention\n"); + DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, + "MFW indication via attention\n"); } else { DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, "MFW indication [deassertion]\n");
From: Navid Emamdoost navid.emamdoost@gmail.com
[ Upstream commit 1e8fd3a97f2d83a7197876ceb4f37b4c2b00a0f3 ]
The implementation of s3fwrn5_recv_frame() is supposed to consume skb on all execution paths. Release skb before returning -ENODEV.
Signed-off-by: Navid Emamdoost navid.emamdoost@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nfc/s3fwrn5/core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/nfc/s3fwrn5/core.c b/drivers/nfc/s3fwrn5/core.c index 9d9c8d57a042d..64b58455e620b 100644 --- a/drivers/nfc/s3fwrn5/core.c +++ b/drivers/nfc/s3fwrn5/core.c @@ -209,6 +209,7 @@ int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb, case S3FWRN5_MODE_FW: return s3fwrn5_fw_recv_frame(ndev, skb); default: + kfree_skb(skb); return -ENODEV; } }
From: Liam Beguin liambeguin@gmail.com
[ Upstream commit b344d6a83d01c52fddbefa6b3b4764da5b1022a0 ]
The kernel test bot reported[1] that using set_mask_bits on a u8 causes the following issue on parisc:
hppa-linux-ld: drivers/phy/ti/phy-tusb1210.o: in function `tusb1210_probe': >> (.text+0x2f4): undefined reference to `__cmpxchg_called_with_bad_pointer' >> hppa-linux-ld: (.text+0x324): undefined reference to `__cmpxchg_called_with_bad_pointer' hppa-linux-ld: (.text+0x354): undefined reference to `__cmpxchg_called_with_bad_pointer'
Add support for cmpxchg on u8 pointers.
[1] https://lore.kernel.org/patchwork/patch/1272617/#1468946
Reported-by: kernel test robot lkp@intel.com Signed-off-by: Liam Beguin liambeguin@gmail.com Tested-by: Dave Anglin dave.anglin@bell.net Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/parisc/include/asm/cmpxchg.h | 2 ++ arch/parisc/lib/bitops.c | 12 ++++++++++++ 2 files changed, 14 insertions(+)
diff --git a/arch/parisc/include/asm/cmpxchg.h b/arch/parisc/include/asm/cmpxchg.h index 90253bdc2ee5e..536690a68917c 100644 --- a/arch/parisc/include/asm/cmpxchg.h +++ b/arch/parisc/include/asm/cmpxchg.h @@ -59,6 +59,7 @@ extern void __cmpxchg_called_with_bad_pointer(void); extern unsigned long __cmpxchg_u32(volatile unsigned int *m, unsigned int old, unsigned int new_); extern u64 __cmpxchg_u64(volatile u64 *ptr, u64 old, u64 new_); +extern u8 __cmpxchg_u8(volatile u8 *ptr, u8 old, u8 new_);
/* don't worry...optimizer will get rid of most of this */ static inline unsigned long @@ -70,6 +71,7 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size) #endif case 4: return __cmpxchg_u32((unsigned int *)ptr, (unsigned int)old, (unsigned int)new_); + case 1: return __cmpxchg_u8((u8 *)ptr, (u8)old, (u8)new_); } __cmpxchg_called_with_bad_pointer(); return old; diff --git a/arch/parisc/lib/bitops.c b/arch/parisc/lib/bitops.c index 8e45b0a97abf6..3284a7adb0a35 100644 --- a/arch/parisc/lib/bitops.c +++ b/arch/parisc/lib/bitops.c @@ -78,3 +78,15 @@ unsigned long __cmpxchg_u32(volatile unsigned int *ptr, unsigned int old, unsign _atomic_spin_unlock_irqrestore(ptr, flags); return (unsigned long)prev; } + +u8 __cmpxchg_u8(volatile u8 *ptr, u8 old, u8 new) +{ + unsigned long flags; + u8 prev; + + _atomic_spin_lock_irqsave(ptr, flags); + if ((prev = *ptr) == old) + *ptr = new; + _atomic_spin_unlock_irqrestore(ptr, flags); + return prev; +}
From: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com
[ Upstream commit 015c5d5e6aa3523c758a70eb87b291cece2dbbb4 ]
According to the report of [1], this driver is possible to cause the following error in ravb_tx_timeout_work().
ravb e6800000.ethernet ethernet: failed to switch device to config mode
This error means that the hardware could not change the state from "Operation" to "Configuration" while some tx and/or rx queue are operating. After that, ravb_config() in ravb_dmac_init() will fail, and then any descriptors will be not allocaled anymore so that NULL pointer dereference happens after that on ravb_start_xmit().
To fix the issue, the ravb_tx_timeout_work() should check the return values of ravb_stop_dma() and ravb_dmac_init(). If ravb_stop_dma() fails, ravb_tx_timeout_work() re-enables TX and RX and just exits. If ravb_dmac_init() fails, just exits.
[1] https://lore.kernel.org/linux-renesas-soc/20200518045452.2390-1-dirk.behme@d...
Reported-by: Dirk Behme dirk.behme@de.bosch.com Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Reviewed-by: Sergei Shtylyov sergei.shtylyov@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/renesas/ravb_main.c | 26 ++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 545cb6262cffd..93d3152752ff4 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1444,6 +1444,7 @@ static void ravb_tx_timeout_work(struct work_struct *work) struct ravb_private *priv = container_of(work, struct ravb_private, work); struct net_device *ndev = priv->ndev; + int error;
netif_tx_stop_all_queues(ndev);
@@ -1452,15 +1453,36 @@ static void ravb_tx_timeout_work(struct work_struct *work) ravb_ptp_stop(ndev);
/* Wait for DMA stopping */ - ravb_stop_dma(ndev); + if (ravb_stop_dma(ndev)) { + /* If ravb_stop_dma() fails, the hardware is still operating + * for TX and/or RX. So, this should not call the following + * functions because ravb_dmac_init() is possible to fail too. + * Also, this should not retry ravb_stop_dma() again and again + * here because it's possible to wait forever. So, this just + * re-enables the TX and RX and skip the following + * re-initialization procedure. + */ + ravb_rcv_snd_enable(ndev); + goto out; + }
ravb_ring_free(ndev, RAVB_BE); ravb_ring_free(ndev, RAVB_NC);
/* Device init */ - ravb_dmac_init(ndev); + error = ravb_dmac_init(ndev); + if (error) { + /* If ravb_dmac_init() fails, descriptors are freed. So, this + * should return here to avoid re-enabling the TX and RX in + * ravb_emac_init(). + */ + netdev_err(ndev, "%s: ravb_dmac_init() failed, error %d\n", + __func__, error); + return; + } ravb_emac_init(ndev);
+out: /* Initialise PTP Clock driver */ if (priv->chip_id == RCAR_GEN2) ravb_ptp_init(ndev, priv->pdev);
From: Raviteja Narayanam raviteja.narayanam@xilinx.com
[ Upstream commit 0db9254d6b896b587759e2c844c277fb1a6da5b9 ]
This reverts commit d358def706880defa4c9e87381c5bf086a97d5f9.
There are two issues with "i2c: cadence: Fix the hold bit setting" commit.
1. In case of combined message request from user space, when the HOLD bit is cleared in cdns_i2c_mrecv function, a STOP condition is sent on the bus even before the last message is started. This is because when the HOLD bit is cleared, the FIFOS are empty and there is no pending transfer. The STOP condition should occur only after the last message is completed.
2. The code added by the commit is redundant. Driver is handling the setting/clearing of HOLD bit in right way before the commit.
The setting of HOLD bit based on 'bus_hold_flag' is taken care in cdns_i2c_master_xfer function even before cdns_i2c_msend/cdns_i2c_recv functions.
The clearing of HOLD bit is taken care at the end of cdns_i2c_msend and cdns_i2c_recv functions based on bus_hold_flag and byte count. Since clearing of HOLD bit is done after the slave address is written to the register (writing to address register triggers the message transfer), it is ensured that STOP condition occurs at the right time after completion of the pending transfer (last message).
Signed-off-by: Raviteja Narayanam raviteja.narayanam@xilinx.com Acked-by: Michal Simek michal.simek@xilinx.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-cadence.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 59c08d5b75d6a..45d6771fac8ce 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -382,10 +382,8 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id) * Check for the message size against FIFO depth and set the * 'hold bus' bit if it is greater than FIFO depth. */ - if ((id->recv_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag) + if (id->recv_count > CDNS_I2C_FIFO_DEPTH) ctrl_reg |= CDNS_I2C_CR_HOLD; - else - ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
@@ -442,11 +440,8 @@ static void cdns_i2c_msend(struct cdns_i2c *id) * Check for the message size against FIFO depth and set the * 'hold bus' bit if it is greater than FIFO depth. */ - if ((id->send_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag) + if (id->send_count > CDNS_I2C_FIFO_DEPTH) ctrl_reg |= CDNS_I2C_CR_HOLD; - else - ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD; - cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
/* Clear the interrupts in interrupt status register. */
From: Andrea Righi andrea.righi@canonical.com
[ Upstream commit c2c633106453611be07821f53dff9e93a9d1c3f0 ]
There's a potential race in xennet_remove(); this is what the driver is doing upon unregistering a network device:
1. state = read bus state 2. if state is not "Closed": 3. request to set state to "Closing" 4. wait for state to be set to "Closing" 5. request to set state to "Closed" 6. wait for state to be set to "Closed"
If the state changes to "Closed" immediately after step 1 we are stuck forever in step 4, because the state will never go back from "Closed" to "Closing".
Make sure to check also for state == "Closed" in step 4 to prevent the deadlock.
Also add a 5 sec timeout any time we wait for the bus state to change, to avoid getting stuck forever in wait_event().
Signed-off-by: Andrea Righi andrea.righi@canonical.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/xen-netfront.c | 64 +++++++++++++++++++++++++------------- 1 file changed, 42 insertions(+), 22 deletions(-)
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 6d391a268469f..ceaf6b30d683d 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -62,6 +62,8 @@ module_param_named(max_queues, xennet_max_queues, uint, 0644); MODULE_PARM_DESC(max_queues, "Maximum number of queues per virtual interface");
+#define XENNET_TIMEOUT (5 * HZ) + static const struct ethtool_ops xennet_ethtool_ops;
struct netfront_cb { @@ -1355,12 +1357,15 @@ static struct net_device *xennet_create_dev(struct xenbus_device *dev)
netif_carrier_off(netdev);
- xenbus_switch_state(dev, XenbusStateInitialising); - wait_event(module_wq, - xenbus_read_driver_state(dev->otherend) != - XenbusStateClosed && - xenbus_read_driver_state(dev->otherend) != - XenbusStateUnknown); + do { + xenbus_switch_state(dev, XenbusStateInitialising); + err = wait_event_timeout(module_wq, + xenbus_read_driver_state(dev->otherend) != + XenbusStateClosed && + xenbus_read_driver_state(dev->otherend) != + XenbusStateUnknown, XENNET_TIMEOUT); + } while (!err); + return netdev;
exit: @@ -2172,28 +2177,43 @@ static const struct attribute_group xennet_dev_group = { }; #endif /* CONFIG_SYSFS */
-static int xennet_remove(struct xenbus_device *dev) +static void xennet_bus_close(struct xenbus_device *dev) { - struct netfront_info *info = dev_get_drvdata(&dev->dev); - - dev_dbg(&dev->dev, "%s\n", dev->nodename); + int ret;
- if (xenbus_read_driver_state(dev->otherend) != XenbusStateClosed) { + if (xenbus_read_driver_state(dev->otherend) == XenbusStateClosed) + return; + do { xenbus_switch_state(dev, XenbusStateClosing); - wait_event(module_wq, - xenbus_read_driver_state(dev->otherend) == - XenbusStateClosing || - xenbus_read_driver_state(dev->otherend) == - XenbusStateUnknown); + ret = wait_event_timeout(module_wq, + xenbus_read_driver_state(dev->otherend) == + XenbusStateClosing || + xenbus_read_driver_state(dev->otherend) == + XenbusStateClosed || + xenbus_read_driver_state(dev->otherend) == + XenbusStateUnknown, + XENNET_TIMEOUT); + } while (!ret); + + if (xenbus_read_driver_state(dev->otherend) == XenbusStateClosed) + return;
+ do { xenbus_switch_state(dev, XenbusStateClosed); - wait_event(module_wq, - xenbus_read_driver_state(dev->otherend) == - XenbusStateClosed || - xenbus_read_driver_state(dev->otherend) == - XenbusStateUnknown); - } + ret = wait_event_timeout(module_wq, + xenbus_read_driver_state(dev->otherend) == + XenbusStateClosed || + xenbus_read_driver_state(dev->otherend) == + XenbusStateUnknown, + XENNET_TIMEOUT); + } while (!ret); +} + +static int xennet_remove(struct xenbus_device *dev) +{ + struct netfront_info *info = dev_get_drvdata(&dev->dev);
+ xennet_bus_close(dev); xennet_disconnect_backend(info);
if (info->netdev->reg_state == NETREG_REGISTERED)
linux-stable-mirror@lists.linaro.org
-
Sasha Levin