[PATCH AUTOSEL 3.18 01/16] scsi: libiscsi: Fix NULL pointer dereference in iscsi_eh_session_reset
From: Fred Herard fred.herard@oracle.com
[ Upstream commit 5db6dd14b31397e8cccaaddab2ff44ebec1acf25 ]
This commit addresses NULL pointer dereference in iscsi_eh_session_reset. Reference should not be made to session->leadconn when session->state is set to ISCSI_STATE_TERMINATE.
Signed-off-by: Fred Herard fred.herard@oracle.com Reviewed-by: Konrad Rzeszutek Wilk konrad.wilk@oracle.com Reviewed-by: Lee Duncan lduncan@suse.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/libiscsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 857bf9417817..56441a5ec3d7 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -2433,8 +2433,8 @@ int iscsi_eh_session_reset(struct scsi_cmnd *sc) failed: ISCSI_DBG_EH(session, "failing session reset: Could not log back into " - "%s, %s [age %d]\n", session->targetname, - conn->persistent_address, session->age); + "%s [age %d]\n", session->targetname, + session->age); spin_unlock_bh(&session->frwd_lock); mutex_unlock(&session->eh_mutex); return FAILED;
From: Cathy Avery cavery@redhat.com
[ Upstream commit 02f425f811cefcc4d325d7a72272651e622dc97e ]
Currently pvscsi_remove calls free_irq more than once as pvscsi_release_resources and __pvscsi_shutdown both call pvscsi_shutdown_intr. This results in a 'Trying to free already-free IRQ' warning and stack trace. To solve the problem pvscsi_shutdown_intr has been moved out of pvscsi_release_resources.
Signed-off-by: Cathy Avery cavery@redhat.com Reviewed-by: Ewan D. Milne emilne@redhat.com Reviewed-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/vmw_pvscsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c index d5dd70049f81..25119780edae 100644 --- a/drivers/scsi/vmw_pvscsi.c +++ b/drivers/scsi/vmw_pvscsi.c @@ -1225,8 +1225,6 @@ static void pvscsi_shutdown_intr(struct pvscsi_adapter *adapter)
static void pvscsi_release_resources(struct pvscsi_adapter *adapter) { - pvscsi_shutdown_intr(adapter); - if (adapter->workqueue) destroy_workqueue(adapter->workqueue);
@@ -1555,6 +1553,7 @@ static int pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id) out_reset_adapter: ll_adapter_reset(adapter); out_release_resources: + pvscsi_shutdown_intr(adapter); pvscsi_release_resources(adapter); scsi_host_put(host); out_disable_device: @@ -1563,6 +1562,7 @@ static int pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id) return error;
out_release_resources_and_disable: + pvscsi_shutdown_intr(adapter); pvscsi_release_resources(adapter); goto out_disable_device; }
From: YiFei Zhu zhuyifei1999@gmail.com
[ Upstream commit 79c2206d369b87b19ac29cb47601059b6bf5c291 ]
An affected screen resolution is 1366 x 768, which width is not divisible by 8, the default font width. On such screens, when longer lines are earlyprintk'ed, overflow-to-next-line can never trigger, due to the left-most x-coordinate of the next character always less than the screen width. Earlyprintk will infinite loop in trying to print the rest of the string but unable to, due to the line being full.
This patch makes the trigger consider the right-most x-coordinate, instead of left-most, as the value to compare against the screen width threshold.
Signed-off-by: YiFei Zhu zhuyifei1999@gmail.com Signed-off-by: Ard Biesheuvel ard.biesheuvel@linaro.org Cc: Andy Lutomirski luto@kernel.org Cc: Arend van Spriel arend.vanspriel@broadcom.com Cc: Bhupesh Sharma bhsharma@redhat.com Cc: Borislav Petkov bp@alien8.de Cc: Dave Hansen dave.hansen@intel.com Cc: Eric Snowberg eric.snowberg@oracle.com Cc: Hans de Goede hdegoede@redhat.com Cc: Joe Perches joe@perches.com Cc: Jon Hunter jonathanh@nvidia.com Cc: Julien Thierry julien.thierry@arm.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Marc Zyngier marc.zyngier@arm.com Cc: Matt Fleming matt@codeblueprint.co.uk Cc: Nathan Chancellor natechancellor@gmail.com Cc: Peter Zijlstra peterz@infradead.org Cc: Sai Praneeth Prakhya sai.praneeth.prakhya@intel.com Cc: Sedat Dilek sedat.dilek@gmail.com Cc: Thomas Gleixner tglx@linutronix.de Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181129171230.18699-12-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/platform/efi/early_printk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/platform/efi/early_printk.c b/arch/x86/platform/efi/early_printk.c index 524142117296..82324fc25d5e 100644 --- a/arch/x86/platform/efi/early_printk.c +++ b/arch/x86/platform/efi/early_printk.c @@ -179,7 +179,7 @@ early_efi_write(struct console *con, const char *str, unsigned int num) num--; }
- if (efi_x >= si->lfb_width) { + if (efi_x + font->width > si->lfb_width) { efi_x = 0; efi_y += font->height; }
From: Toni Peltonen peltzi@peltzi.fi
[ Upstream commit 3b5b3a3331d141e8f2a7aaae3a94dfa1e61ecbe4 ]
Previously when unbinding a slave the 802.3ad implementation only told partner that the port is not suitable for aggregation by setting the port aggregation state from aggregatable to individual. This is not enough. If the physical layer still stays up and we only unbinded this port from the bond there is nothing in the aggregation status alone to prevent the partner from sending traffic towards us. To ensure that the partner doesn't consider this port at all anymore we should also disable collecting and distributing to signal that this actor is going away. Also clear AD_STATE_SYNCHRONIZATION to ensure partner exits collecting + distributing state.
I have tested this behaviour againts Arista EOS switches with mlx5 cards (physical link stays up even when interface is down) and simulated the same situation virtually Linux <-> Linux with two network namespaces running two veth device pairs. In both cases setting aggregation to individual doesn't alone prevent traffic from being to sent towards this port given that the link stays up in partners end. Partner still keeps it's end in collecting + distributing state and continues until timeout is reached. In most cases this means we are losing the traffic partner sends towards our port while we wait for timeout. This is most visible with slow periodic time (LACP rate slow).
Other open source implementations like Open VSwitch and libreswitch, and vendor implementations like Arista EOS, seem to disable collecting + distributing to when doing similar port disabling/detaching/removing change. With this patch kernel implementation would behave the same way and ensure partner doesn't consider our actor viable anymore.
Signed-off-by: Toni Peltonen peltzi@peltzi.fi Signed-off-by: Jay Vosburgh jay.vosburgh@canonical.com Acked-by: Jonathan Toppins jtoppins@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/bonding/bond_3ad.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 2110215f3528..371cbaa82608 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -1906,6 +1906,9 @@ void bond_3ad_unbind_slave(struct slave *slave) aggregator->aggregator_identifier);
/* Tell the partner that this port is not suitable for aggregation */ + port->actor_oper_port_state &= ~AD_STATE_SYNCHRONIZATION; + port->actor_oper_port_state &= ~AD_STATE_COLLECTING; + port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING; port->actor_oper_port_state &= ~AD_STATE_AGGREGATION; __update_lacpdu_from_port(port); ad_lacpdu_send(port);
From: Chuck Lever chuck.lever@oracle.com
[ Upstream commit 8dae5398ab1ac107b1517e8195ed043d5f422bd0 ]
call_encode can be invoked more than once per RPC call. Ensure that each call to gss_wrap_req_priv does not overwrite pointers to previously allocated memory.
Signed-off-by: Chuck Lever chuck.lever@oracle.com Cc: stable@kernel.org Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/auth_gss/auth_gss.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 81e29f02d28e..7a0e287be77f 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -1721,6 +1721,7 @@ priv_release_snd_buf(struct rpc_rqst *rqstp) for (i=0; i < rqstp->rq_enc_pages_num; i++) __free_page(rqstp->rq_enc_pages[i]); kfree(rqstp->rq_enc_pages); + rqstp->rq_release_snd_buf = NULL; }
static int @@ -1729,6 +1730,9 @@ alloc_enc_pages(struct rpc_rqst *rqstp) struct xdr_buf *snd_buf = &rqstp->rq_snd_buf; int first, last, i;
+ if (rqstp->rq_release_snd_buf) + rqstp->rq_release_snd_buf(rqstp); + if (snd_buf->page_len == 0) { rqstp->rq_enc_pages_num = 0; return 0;
From: Trond Myklebust trond.myklebust@hammerspace.com
[ Upstream commit 0a9a4304f3614e25d9de9b63502ca633c01c0d70 ]
If an asynchronous connection attempt completes while another task is in xprt_connect(), then the call to rpc_sleep_on() could end up racing with the call to xprt_wake_pending_tasks(). So add a second test of the connection state after we've put the task to sleep and set the XPRT_CONNECTING flag, when we know that there can be no asynchronous connection attempts still in progress.
Fixes: 0b9e79431377d ("SUNRPC: Move the test for XPRT_CONNECTING into...") Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/xprt.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 56e4e150e80e..dca234b1f77d 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -721,8 +721,15 @@ void xprt_connect(struct rpc_task *task) return; if (xprt_test_and_set_connecting(xprt)) return; - xprt->stat.connect_start = jiffies; - xprt->ops->connect(xprt, task); + /* Race breaker */ + if (!xprt_connected(xprt)) { + xprt->stat.connect_start = jiffies; + xprt->ops->connect(xprt, task); + } else { + xprt_clear_connecting(xprt); + task->tk_status = 0; + rpc_wake_up_queued_task(&xprt->pending, task); + } } }
From: Yangtao Li tiny.windzz@gmail.com
[ Upstream commit 87d81a23e24f24ebe014891e8bdf3ff8785031e8 ]
use of_node_put() to release the refcount.
Signed-off-by: Yangtao Li tiny.windzz@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/sbus/char/display7seg.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/sbus/char/display7seg.c b/drivers/sbus/char/display7seg.c index 2b0ce7c350ee..98661714688b 100644 --- a/drivers/sbus/char/display7seg.c +++ b/drivers/sbus/char/display7seg.c @@ -221,6 +221,7 @@ static int d7s_probe(struct platform_device *op) dev_set_drvdata(&op->dev, p); d7s_device = p; err = 0; + of_node_put(opts);
out: return err;
From: Yangtao Li tiny.windzz@gmail.com
[ Upstream commit 6bd520ab7cf69486ea81fd3cdfd2d5a390ad1100 ]
use of_node_put() to release the refcount.
Signed-off-by: Yangtao Li tiny.windzz@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/sbus/char/envctrl.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c index af15a2fdab5e..3d36fa025a5a 100644 --- a/drivers/sbus/char/envctrl.c +++ b/drivers/sbus/char/envctrl.c @@ -910,8 +910,10 @@ static void envctrl_init_i2c_child(struct device_node *dp, for (len = 0; len < PCF8584_MAX_CHANNELS; ++len) { pchild->mon_type[len] = ENVCTRL_NOMON; } + of_node_put(root_node); return; } + of_node_put(root_node); }
/* Get the monitor channels. */
From: Yangtao Li tiny.windzz@gmail.com
[ Upstream commit dac097c4546e4c5b16dd303a1e97c1d319c8ab3e ]
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place is not doing this, so fix it.
Signed-off-by: Yangtao Li tiny.windzz@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/suncore.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/tty/serial/suncore.c b/drivers/tty/serial/suncore.c index 6e4ac8db2d79..2b06c1603f23 100644 --- a/drivers/tty/serial/suncore.c +++ b/drivers/tty/serial/suncore.c @@ -112,6 +112,7 @@ void sunserial_console_termios(struct console *con, struct device_node *uart_dp) mode = of_get_property(dp, mode_prop, NULL); if (!mode) mode = "9600,8,n,1,-"; + of_node_put(dp); }
cflag = CREAD | HUPCL | CLOCAL;
From: Yangtao Li tiny.windzz@gmail.com
[ Upstream commit a51921c0db3fd26c4ed83dc0ec5d32988fa02aa5 ]
use of_node_put() to release the refcount.
Signed-off-by: Yangtao Li tiny.windzz@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ide/pmac.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 2db803cd095c..57a0bd00789f 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c @@ -920,6 +920,7 @@ static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) struct device_node *root = of_find_node_by_path("/"); const char *model = of_get_property(root, "model", NULL);
+ of_node_put(root); /* Get cable type from device-tree. */ if (cable && !strncmp(cable, "80-", 3)) { /* Some drives fail to detect 80c cable in PowerBook */
From: Tony Lindgren tony@atomide.com
[ Upstream commit 6c3516fed7b61a3527459ccfa67fab130d910610 ]
I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations.
This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch.
Reported-by: Pavel Machek pavel@ucw.cz Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/keyboard/omap4-keypad.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c index 3ab045369c0c..1739221aa5fa 100644 --- a/drivers/input/keyboard/omap4-keypad.c +++ b/drivers/input/keyboard/omap4-keypad.c @@ -60,8 +60,18 @@
/* OMAP4 values */ #define OMAP4_VAL_IRQDISABLE 0x0 -#define OMAP4_VAL_DEBOUNCINGTIME 0x7 -#define OMAP4_VAL_PVT 0x7 + +/* + * Errata i689: If a key is released for a time shorter than debounce time, + * the keyboard will idle and never detect the key release. The workaround + * is to use at least a 12ms debounce time. See omap5432 TRM chapter + * "26.4.6.2 Keyboard Controller Timer" for more information. + */ +#define OMAP4_KEYPAD_PTV_DIV_128 0x6 +#define OMAP4_KEYPAD_DEBOUNCINGTIME_MS(dbms, ptv) \ + ((((dbms) * 1000) / ((1 << ((ptv) + 1)) * (1000000 / 32768))) - 1) +#define OMAP4_VAL_DEBOUNCINGTIME_16MS \ + OMAP4_KEYPAD_DEBOUNCINGTIME_MS(16, OMAP4_KEYPAD_PTV_DIV_128)
enum { KBD_REVISION_OMAP4 = 0, @@ -181,9 +191,9 @@ static int omap4_keypad_open(struct input_dev *input)
kbd_writel(keypad_data, OMAP4_KBD_CTRL, OMAP4_DEF_CTRL_NOSOFTMODE | - (OMAP4_VAL_PVT << OMAP4_DEF_CTRL_PTV_SHIFT)); + (OMAP4_KEYPAD_PTV_DIV_128 << OMAP4_DEF_CTRL_PTV_SHIFT)); kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME, - OMAP4_VAL_DEBOUNCINGTIME); + OMAP4_VAL_DEBOUNCINGTIME_16MS); /* clear pending interrupts */ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
From: Juha-Matti Tilli juha-matti.tilli@iki.fi
[ Upstream commit fd6f32f78645db32b6b95a42e45da2ddd6de0e67 ]
These devices support read zero after trim (RZAT), as they advertise to the OS. However, the OS doesn't believe the SSDs unless they are explicitly whitelisted.
Acked-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Juha-Matti Tilli juha-matti.tilli@iki.fi Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/libata-core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 6629a5deccbd..e155998e4696 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4295,6 +4295,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "SSD*INTEL*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Samsung*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "SAMSUNG*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "SAMSUNG*MZ7KM*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "ST[1248][0248]0[FH]*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
/* devices that don't properly handle TRIM commands */
From: Su Yanjun suyj.fnst@cn.fujitsu.com
[ Upstream commit a5d4a89245ead1f37ed135213653c5beebea4237 ]
When changing mtu many times with traffic, a bug is triggered:
[ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26! [ 1035.684042] invalid opcode: 0000 [#1] SMP [ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter devlink ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic [ 1035.684102] pata_acpi virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror dm_region_hash dm_log dm_mod [last unloaded: 8139cp] [ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded Tainted: G OE ------------ T 3.10.0-957.el7.x86_64 #1 [ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti: ffff8f5a2e32c000 [ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>] [<ffffffffba3a40d0>] dql_completed+0x180/0x190 [ 1035.684162] RSP: 0000:ffff8f5a75483e50 EFLAGS: 00010093 [ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX: 0000000000000000 [ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI: ffff8f599fea3ec0 [ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09: 0000000000000000 [ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12: ffff8f599fea3e00 [ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000184 [ 1035.684162] FS: 00007fa8434de740(0000) GS:ffff8f5a75480000(0000) knlGS:0000000000000000 [ 1035.684162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4: 00000000001406e0 [ 1035.684162] Call Trace: [ 1035.684162] <IRQ> [ 1035.684162] [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp] [ 1035.684162] [<ffffffffba14a294>] __handle_irq_event_percpu+0x44/0x1c0 [ 1035.684162] [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80 [ 1035.684162] [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60 [ 1035.684162] [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110 [ 1035.684162] [<ffffffffba02e554>] handle_irq+0xe4/0x1a0 [ 1035.684162] [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0 [ 1035.684162] [<ffffffffba76b362>] common_interrupt+0x162/0x162 [ 1035.684162] <EOI> [ 1035.684162] [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70 [ 1035.684162] [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120 [ 1035.684162] [<ffffffffba1b64fb>] unlock_page+0x2b/0x30 [ 1035.684162] [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0 [ 1035.684162] [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10 [ 1035.684162] [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0 [ 1035.684162] [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500 [ 1035.684162] [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150 [ 1035.684162] [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0 [ 1035.684162] [<ffffffffba76b788>] async_page_fault+0x28/0x30 [ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f 9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48 [ 1035.684162] RIP [<ffffffffba3a40d0>] dql_completed+0x180/0x190 [ 1035.684162] RSP <ffff8f5a75483e50>
It's not the same as in 7fe0ee09 patch described. As 8139cp uses shared irq mode, other device irq will trigger cp_interrupt to execute.
cp_change_mtu -> cp_close -> cp_open
In cp_close routine just before free_irq(), some interrupt may occur. In my environment, cp_interrupt exectutes and IntrStatus is 0x4, exactly TxOk. That will cause cp_tx to wake device queue.
As device queue is started, cp_start_xmit and cp_open will run at same time which will cause kernel BUG.
For example: [#] for tx descriptor
At start:
[#][#][#] num_queued=3
After cp_init_hw->cp_start_hw->netdev_reset_queue:
[#][#][#] num_queued=0
When 8139cp starts to work then cp_tx will check num_queued mismatchs the complete_bytes.
The patch will check IntrMask before check IntrStatus in cp_interrupt. When 8139cp interrupt is disabled, just return.
Signed-off-by: Su Yanjun suyj.fnst@cn.fujitsu.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/realtek/8139cp.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index 75b1693ec8bf..1c0c1a28161c 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -576,6 +576,7 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance) struct cp_private *cp; int handled = 0; u16 status; + u16 mask;
if (unlikely(dev == NULL)) return IRQ_NONE; @@ -583,6 +584,10 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
spin_lock(&cp->lock);
+ mask = cpr16(IntrMask); + if (!mask) + goto out_unlock; + status = cpr16(IntrStatus); if (!status || (status == 0xFFFF)) goto out_unlock;
From: Chris Cole chris@sageembedded.com
[ Upstream commit a1208f6a822ac29933e772ef1f637c5d67838da9 ]
This patch addresses possible memory corruption when v7_dma_inv_range(start_address, end_address) address parameters are not aligned to whole cache lines. This function issues "invalidate" cache management operations to all cache lines from start_address (inclusive) to end_address (exclusive). When start_address and/or end_address are not aligned, the start and/or end cache lines are first issued "clean & invalidate" operation. The assumption is this is done to ensure that any dirty data addresses outside the address range (but part of the first or last cache lines) are cleaned/flushed so that data is not lost, which could happen if just an invalidate is issued.
The problem is that these first/last partial cache lines are issued "clean & invalidate" and then "invalidate". This second "invalidate" is not required and worse can cause "lost" writes to addresses outside the address range but part of the cache line. If another component writes to its part of the cache line between the "clean & invalidate" and "invalidate" operations, the write can get lost. This fix is to remove the extra "invalidate" operation when unaligned addressed are used.
A kernel module is available that has a stress test to reproduce the issue and a unit test of the updated v7_dma_inv_range(). It can be downloaded from http://ftp.sageembedded.com/outgoing/linux/cache-test-20181107.tgz.
v7_dma_inv_range() is call by dmac_[un]map_area(addr, len, direction) when the direction is DMA_FROM_DEVICE. One can (I believe) successfully argue that DMA from a device to main memory should use buffers aligned to cache line size, because the "clean & invalidate" might overwrite data that the device just wrote using DMA. But if a driver does use unaligned buffers, at least this fix will prevent memory corruption outside the buffer.
Signed-off-by: Chris Cole chris@sageembedded.com Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mm/cache-v7.S | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index b966656d2c2d..7e98fecff55a 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -359,14 +359,16 @@ v7_dma_inv_range: ALT_UP(W(nop)) #endif mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line + addne r0, r0, r2
tst r1, r3 bic r1, r1, r3 mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D / U line -1: - mcr p15, 0, r0, c7, c6, 1 @ invalidate D / U line - add r0, r0, r2 cmp r0, r1 +1: + mcrlo p15, 0, r0, c7, c6, 1 @ invalidate D / U line + addlo r0, r0, r2 + cmplo r0, r1 blo 1b dsb st ret lr
From: Steve French stfrench@microsoft.com
[ Upstream commit 6e785302dad32228819d8066e5376acd15d0e6ba ]
Missing a dependency. Shouldn't show cifs posix extensions in Kconfig if CONFIG_CIFS_ALLOW_INSECURE_DIALECTS (ie SMB1 protocol) is disabled.
Signed-off-by: Steve French stfrench@microsoft.com Reviewed-by: Pavel Shilovsky pshilov@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig index a2172f3f69e3..35bbf6b64982 100644 --- a/fs/cifs/Kconfig +++ b/fs/cifs/Kconfig @@ -111,7 +111,7 @@ config CIFS_XATTR
config CIFS_POSIX bool "CIFS POSIX Extensions" - depends on CIFS_XATTR + depends on CIFS && CIFS_ALLOW_INSECURE_LEGACY && CIFS_XATTR help Enabling this option will cause the cifs client to attempt to negotiate a newer dialect with servers, such as Samba 3.0.5
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 0544ee4b1ad574aec3b6379af5f5cdee42840971 ]
Some AMD based HP laptops have a SMB0001 ACPI device node which does not define any methods.
This leads to the following error in dmesg:
[ 5.222731] cmi: probe of SMB0001:00 failed with error -5
This commit makes acpi_smbus_cmi_add() return -ENODEV instead in this case silencing the error. In case of a failure of the i2c_add_adapter() call this commit now propagates the error from that call instead of -EIO.
Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-scmi.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c index efefcfa24a4c..d2178f701b41 100644 --- a/drivers/i2c/busses/i2c-scmi.c +++ b/drivers/i2c/busses/i2c-scmi.c @@ -364,6 +364,7 @@ static int acpi_smbus_cmi_add(struct acpi_device *device) { struct acpi_smbus_cmi *smbus_cmi; const struct acpi_device_id *id; + int ret;
smbus_cmi = kzalloc(sizeof(struct acpi_smbus_cmi), GFP_KERNEL); if (!smbus_cmi) @@ -385,8 +386,10 @@ static int acpi_smbus_cmi_add(struct acpi_device *device) acpi_walk_namespace(ACPI_TYPE_METHOD, smbus_cmi->handle, 1, acpi_smbus_cmi_query_methods, NULL, smbus_cmi, NULL);
- if (smbus_cmi->cap_info == 0) + if (smbus_cmi->cap_info == 0) { + ret = -ENODEV; goto err; + }
snprintf(smbus_cmi->adapter.name, sizeof(smbus_cmi->adapter.name), "SMBus CMI adapter %s", @@ -397,7 +400,8 @@ static int acpi_smbus_cmi_add(struct acpi_device *device) smbus_cmi->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; smbus_cmi->adapter.dev.parent = &device->dev;
- if (i2c_add_adapter(&smbus_cmi->adapter)) { + ret = i2c_add_adapter(&smbus_cmi->adapter); + if (ret) { dev_err(&device->dev, "Couldn't register adapter!\n"); goto err; } @@ -407,7 +411,7 @@ static int acpi_smbus_cmi_add(struct acpi_device *device) err: kfree(smbus_cmi); device->driver_data = NULL; - return -EIO; + return ret; }
static int acpi_smbus_cmi_remove(struct acpi_device *device)
linux-stable-mirror@lists.linaro.org
-
Sasha Levin