From: Thierry Reding treding@nvidia.com
[ Upstream commit 4c892121d43bc2b45896ca207b54f39a8fa6b852 ]
The PHY is configured in 10GBASE-R, so make sure to reflect that in DT.
Reviewed-by: Jon Hunter jonathanh@nvidia.com Tested-by: Jon Hunter jonathanh@nvidia.com Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index f094011be9ed9..8099dc04ed2e1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -2024,7 +2024,7 @@ status = "okay";
phy-handle = <&mgbe0_phy>; - phy-mode = "usxgmii"; + phy-mode = "10gbase-r";
mdio { #address-cells = <1>;
From: Alban Boyé alban.boye@protonmail.com
[ Upstream commit f8b0127aca8c60826e7354e504a12d4a46b1c3bb ]
The bios version can differ depending if it is a dual-boot variant of the tablet. Therefore another DMI match is required.
Signed-off-by: Alban Boyé alban.boye@protonmail.com Reviewed-by: Cezary Rojewski cezary.rojewski@intel.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://msgid.link/r/20240228192807.15130-1-alban.boye@protonmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 797d0a48d6066..094445036c20f 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -685,6 +685,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { /* Chuwi Vi8 dual-boot (CWI506) */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "i86"), + /* The above are too generic, also match BIOS info */ + DMI_MATCH(DMI_BIOS_VERSION, "CHUWI2.D86JHBNR02"), + }, + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { /* Chuwi Vi10 (CWI505) */ .matches = {
From: Michael Kelley mhklinux@outlook.com
[ Upstream commit 9fef276f9f416a1e85eb48d3bd38e6018a220bf5 ]
In preparation for temporarily marking pages not present during a transition between encrypted and decrypted, use slow_virt_to_phys() in the hypervisor callback. As long as the PFN is correct, slow_virt_to_phys() works even if the leaf PTE is not present. The existing functions that depend on vmalloc_to_page() all require that the leaf PTE be marked present, so they don't work.
Update the comments for slow_virt_to_phys() to note this broader usage and the requirement to work even if the PTE is not marked present.
Signed-off-by: Michael Kelley mhklinux@outlook.com Acked-by: Kirill A. Shutemov kirill.shutemov@linux.intel.com Reviewed-by: Rick Edgecombe rick.p.edgecombe@intel.com Link: https://lore.kernel.org/r/20240116022008.1023398-2-mhklinux@outlook.com Signed-off-by: Wei Liu wei.liu@kernel.org Message-ID: 20240116022008.1023398-2-mhklinux@outlook.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/hyperv/ivm.c | 12 +++++++++++- arch/x86/mm/pat/set_memory.c | 12 ++++++++---- 2 files changed, 19 insertions(+), 5 deletions(-)
diff --git a/arch/x86/hyperv/ivm.c b/arch/x86/hyperv/ivm.c index 1dbcbd9da74d4..fd08270dd7946 100644 --- a/arch/x86/hyperv/ivm.c +++ b/arch/x86/hyperv/ivm.c @@ -332,6 +332,8 @@ int hv_set_mem_host_visibility(unsigned long kbuffer, int pagecount, bool visibl enum hv_mem_host_visibility visibility = visible ? VMBUS_PAGE_VISIBLE_READ_WRITE : VMBUS_PAGE_NOT_VISIBLE; u64 *pfn_array; + phys_addr_t paddr; + void *vaddr; int ret = 0; int i, pfn;
@@ -343,7 +345,15 @@ int hv_set_mem_host_visibility(unsigned long kbuffer, int pagecount, bool visibl return -ENOMEM;
for (i = 0, pfn = 0; i < pagecount; i++) { - pfn_array[pfn] = virt_to_hvpfn((void *)kbuffer + i * HV_HYP_PAGE_SIZE); + /* + * Use slow_virt_to_phys() because the PRESENT bit has been + * temporarily cleared in the PTEs. slow_virt_to_phys() works + * without the PRESENT bit while virt_to_hvpfn() or similar + * does not. + */ + vaddr = (void *)kbuffer + (i * HV_HYP_PAGE_SIZE); + paddr = slow_virt_to_phys(vaddr); + pfn_array[pfn] = paddr >> HV_HYP_PAGE_SHIFT; pfn++;
if (pfn == HV_MAX_MODIFY_GPA_REP_COUNT || i == pagecount - 1) { diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c index 5f0ce77a259d8..fcc0d0f16be3f 100644 --- a/arch/x86/mm/pat/set_memory.c +++ b/arch/x86/mm/pat/set_memory.c @@ -723,10 +723,14 @@ pmd_t *lookup_pmd_address(unsigned long address) * areas on 32-bit NUMA systems. The percpu areas can * end up in this kind of memory, for instance. * - * This could be optimized, but it is only intended to be - * used at initialization time, and keeping it - * unoptimized should increase the testing coverage for - * the more obscure platforms. + * Note that as long as the PTEs are well-formed with correct PFNs, this + * works without checking the PRESENT bit in the leaf PTE. This is unlike + * the similar vmalloc_to_page() and derivatives. Callers may depend on + * this behavior. + * + * This could be optimized, but it is only used in paths that are not perf + * sensitive, and keeping it unoptimized should increase the testing coverage + * for the more obscure platforms. */ phys_addr_t slow_virt_to_phys(void *__virt_addr) {
Hi!
In preparation for temporarily marking pages not present during a transition between encrypted and decrypted, use slow_virt_to_phys() in the hypervisor callback. As long as the PFN is correct,
This seems to be preparation for something we don't plan to do in -stable. Please drop.
Best regards, Pavel
From: Pavel Machek pavel@ucw.cz Sent: Tuesday, March 12, 2024 1:35 PM
In preparation for temporarily marking pages not present during a transition between encrypted and decrypted, use slow_virt_to_phys() in the hypervisor callback. As long as the PFN is correct,
This seems to be preparation for something we don't plan to do in -stable. Please drop.
As the author of the patch, I agree.
Michael
From: Uwe Kleine-König u.kleine-koenig@pengutronix.de
[ Upstream commit 963465a33141d0d52338e77f80fe543d2c9dc053 ]
On a PC Engines APU our admins are faced with:
$ dmesg | grep -c "gpio-keys-polled gpio-keys-polled: unable to claim gpio 0, err=-517" 261
Such a message always appears when e.g. a new USB device is plugged in.
Suppress this message which considerably clutters the kernel log for EPROBE_DEFER (i.e. -517).
Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Reviewed-by: Linus Walleij linus.walleij@linaro.org Link: https://lore.kernel.org/r/20240305101042.10953-2-u.kleine-koenig@pengutronix... Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/keyboard/gpio_keys_polled.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c index c3937d2fc7446..a0f9978c68f55 100644 --- a/drivers/input/keyboard/gpio_keys_polled.c +++ b/drivers/input/keyboard/gpio_keys_polled.c @@ -319,12 +319,10 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
error = devm_gpio_request_one(dev, button->gpio, flags, button->desc ? : DRV_NAME); - if (error) { - dev_err(dev, - "unable to claim gpio %u, err=%d\n", - button->gpio, error); - return error; - } + if (error) + return dev_err_probe(dev, error, + "unable to claim gpio %u\n", + button->gpio);
bdata->gpiod = gpio_to_desc(button->gpio); if (!bdata->gpiod) {
From: Stuart Henderson stuarth@opensource.cirrus.com
[ Upstream commit 03c7874106ca5032a312626b927b1c35f07b1f35 ]
Signed-off-by: Stuart Henderson stuarth@opensource.cirrus.com Link: https://msgid.link/r/20240306161439.1385643-1-stuarth@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm8962.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index b901e4c65e8a5..35d8cd4fc71a7 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -2914,8 +2914,12 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s switch (fll_id) { case WM8962_FLL_MCLK: case WM8962_FLL_BCLK: + fll1 |= (fll_id - 1) << WM8962_FLL_REFCLK_SRC_SHIFT; + break; case WM8962_FLL_OSC: fll1 |= (fll_id - 1) << WM8962_FLL_REFCLK_SRC_SHIFT; + snd_soc_component_update_bits(component, WM8962_PLL2, + WM8962_OSC_ENA, WM8962_OSC_ENA); break; case WM8962_FLL_INT: snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_1,
From: Stuart Henderson stuarth@opensource.cirrus.com
[ Upstream commit 6fa849e4d78b880e878138bf238e4fd2bac3c4fa ]
Signed-off-by: Stuart Henderson stuarth@opensource.cirrus.com Link: https://msgid.link/r/20240306161439.1385643-2-stuarth@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm8962.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-)
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 35d8cd4fc71a7..806b69c9b2e36 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -2229,6 +2229,9 @@ SND_SOC_DAPM_PGA_E("HPOUT", SND_SOC_NOPM, 0, 0, NULL, 0, hp_event,
SND_SOC_DAPM_OUTPUT("HPOUTL"), SND_SOC_DAPM_OUTPUT("HPOUTR"), + +SND_SOC_DAPM_PGA("SPKOUTL Output", WM8962_CLASS_D_CONTROL_1, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA("SPKOUTR Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0), };
static const struct snd_soc_dapm_widget wm8962_dapm_spk_mono_widgets[] = { @@ -2236,7 +2239,6 @@ SND_SOC_DAPM_MIXER("Speaker Mixer", WM8962_MIXER_ENABLES, 1, 0, spkmixl, ARRAY_SIZE(spkmixl)), SND_SOC_DAPM_MUX_E("Speaker PGA", WM8962_PWR_MGMT_2, 4, 0, &spkoutl_mux, out_pga_event, SND_SOC_DAPM_POST_PMU), -SND_SOC_DAPM_PGA("Speaker Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0), SND_SOC_DAPM_OUTPUT("SPKOUT"), };
@@ -2251,9 +2253,6 @@ SND_SOC_DAPM_MUX_E("SPKOUTL PGA", WM8962_PWR_MGMT_2, 4, 0, &spkoutl_mux, SND_SOC_DAPM_MUX_E("SPKOUTR PGA", WM8962_PWR_MGMT_2, 3, 0, &spkoutr_mux, out_pga_event, SND_SOC_DAPM_POST_PMU),
-SND_SOC_DAPM_PGA("SPKOUTR Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0), -SND_SOC_DAPM_PGA("SPKOUTL Output", WM8962_CLASS_D_CONTROL_1, 6, 0, NULL, 0), - SND_SOC_DAPM_OUTPUT("SPKOUTL"), SND_SOC_DAPM_OUTPUT("SPKOUTR"), }; @@ -2366,12 +2365,18 @@ static const struct snd_soc_dapm_route wm8962_spk_mono_intercon[] = { { "Speaker PGA", "Mixer", "Speaker Mixer" }, { "Speaker PGA", "DAC", "DACL" },
- { "Speaker Output", NULL, "Speaker PGA" }, - { "Speaker Output", NULL, "SYSCLK" }, - { "Speaker Output", NULL, "TOCLK" }, - { "Speaker Output", NULL, "TEMP_SPK" }, + { "SPKOUTL Output", NULL, "Speaker PGA" }, + { "SPKOUTL Output", NULL, "SYSCLK" }, + { "SPKOUTL Output", NULL, "TOCLK" }, + { "SPKOUTL Output", NULL, "TEMP_SPK" }, + + { "SPKOUTR Output", NULL, "Speaker PGA" }, + { "SPKOUTR Output", NULL, "SYSCLK" }, + { "SPKOUTR Output", NULL, "TOCLK" }, + { "SPKOUTR Output", NULL, "TEMP_SPK" },
- { "SPKOUT", NULL, "Speaker Output" }, + { "SPKOUT", NULL, "SPKOUTL Output" }, + { "SPKOUT", NULL, "SPKOUTR Output" }, };
static const struct snd_soc_dapm_route wm8962_spk_stereo_intercon[] = {
From: Stuart Henderson stuarth@opensource.cirrus.com
[ Upstream commit 96e202f8c52ac49452f83317cf3b34cd1ad81e18 ]
Use source instead of ret, which seems to be unrelated and will always be zero.
Signed-off-by: Stuart Henderson stuarth@opensource.cirrus.com Link: https://msgid.link/r/20240306161439.1385643-5-stuarth@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm8962.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 806b69c9b2e36..d215e58c4a7b3 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -2933,7 +2933,7 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s WM8962_FLL_FRC_NCO, WM8962_FLL_FRC_NCO); break; default: - dev_err(component->dev, "Unknown FLL source %d\n", ret); + dev_err(component->dev, "Unknown FLL source %d\n", source); return -EINVAL; }
linux-stable-mirror@lists.linaro.org
-
Michael Kelley -
Pavel Machek -
Sasha Levin