From: Marco Felsch m.felsch@pengutronix.de
[ Upstream commit 6c9762a78c325107dc37d20ee21002b841679209 ]
The ni1/ni2 ratio formula [1] uses the pclk which is the prescaled mclk. The max98088 datasheet [2] has no such formula but table-12 equals so we can assume that it is the same for both devices.
While on it make use of DIV_ROUND_CLOSEST_ULL().
[1] https://datasheets.maximintegrated.com/en/ds/MAX98089.pdf; page 86 [2] https://datasheets.maximintegrated.com/en/ds/MAX98088.pdf; page 82
Signed-off-by: Marco Felsch m.felsch@pengutronix.de Link: https://lore.kernel.org/r/20210423135402.32105-1-m.felsch@pengutronix.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/max98088.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c index f031d2caa8b7..fa4cdbfd0b80 100644 --- a/sound/soc/codecs/max98088.c +++ b/sound/soc/codecs/max98088.c @@ -41,6 +41,7 @@ struct max98088_priv { enum max98088_type devtype; struct max98088_pdata *pdata; struct clk *mclk; + unsigned char mclk_prescaler; unsigned int sysclk; struct max98088_cdata dai[2]; int eq_textcnt; @@ -998,13 +999,16 @@ static int max98088_dai1_hw_params(struct snd_pcm_substream *substream, /* Configure NI when operating as master */ if (snd_soc_component_read32(component, M98088_REG_14_DAI1_FORMAT) & M98088_DAI_MAS) { + unsigned long pclk; + if (max98088->sysclk == 0) { dev_err(component->dev, "Invalid system clock frequency\n"); return -EINVAL; } ni = 65536ULL * (rate < 50000 ? 96ULL : 48ULL) * (unsigned long long int)rate; - do_div(ni, (unsigned long long int)max98088->sysclk); + pclk = DIV_ROUND_CLOSEST(max98088->sysclk, max98088->mclk_prescaler); + ni = DIV_ROUND_CLOSEST_ULL(ni, pclk); snd_soc_component_write(component, M98088_REG_12_DAI1_CLKCFG_HI, (ni >> 8) & 0x7F); snd_soc_component_write(component, M98088_REG_13_DAI1_CLKCFG_LO, @@ -1065,13 +1069,16 @@ static int max98088_dai2_hw_params(struct snd_pcm_substream *substream, /* Configure NI when operating as master */ if (snd_soc_component_read32(component, M98088_REG_1C_DAI2_FORMAT) & M98088_DAI_MAS) { + unsigned long pclk; + if (max98088->sysclk == 0) { dev_err(component->dev, "Invalid system clock frequency\n"); return -EINVAL; } ni = 65536ULL * (rate < 50000 ? 96ULL : 48ULL) * (unsigned long long int)rate; - do_div(ni, (unsigned long long int)max98088->sysclk); + pclk = DIV_ROUND_CLOSEST(max98088->sysclk, max98088->mclk_prescaler); + ni = DIV_ROUND_CLOSEST_ULL(ni, pclk); snd_soc_component_write(component, M98088_REG_1A_DAI2_CLKCFG_HI, (ni >> 8) & 0x7F); snd_soc_component_write(component, M98088_REG_1B_DAI2_CLKCFG_LO, @@ -1113,8 +1120,10 @@ static int max98088_dai_set_sysclk(struct snd_soc_dai *dai, */ if ((freq >= 10000000) && (freq < 20000000)) { snd_soc_component_write(component, M98088_REG_10_SYS_CLK, 0x10); + max98088->mclk_prescaler = 1; } else if ((freq >= 20000000) && (freq < 30000000)) { snd_soc_component_write(component, M98088_REG_10_SYS_CLK, 0x20); + max98088->mclk_prescaler = 2; } else { dev_err(component->dev, "Invalid master clock frequency\n"); return -EINVAL;
From: Saravana Kannan saravanak@google.com
[ Upstream commit c7299fea67696db5bd09d924d1f1080d894f92ef ]
When an SPI device is unregistered, the spi->controller->cleanup() is called in the device's release callback. That's wrong for a couple of reasons:
1. spi_dev_put() can be called before spi_add_device() is called. And it's spi_add_device() that calls spi_setup(). This will cause clean() to get called without the spi device ever being setup.
2. There's no guarantee that the controller's driver would be present by the time the spi device's release function gets called.
3. It also causes "sleeping in atomic context" stack dump[1] when device link deletion code does a put_device() on the spi device.
Fix these issues by simply moving the cleanup from the device release callback to the actual spi_unregister_device() function.
[1] - https://lore.kernel.org/lkml/CAHp75Vc=FCGcUyS0v6fnxme2YJ+qD+Y-hQDQLa2JhWNON9...
Signed-off-by: Saravana Kannan saravanak@google.com Link: https://lore.kernel.org/r/20210426235638.1285530-1-saravanak@google.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 7592d4de20c9..c4b80cf825b8 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -47,10 +47,6 @@ static void spidev_release(struct device *dev) { struct spi_device *spi = to_spi_device(dev);
- /* spi controllers may cleanup for released devices */ - if (spi->controller->cleanup) - spi->controller->cleanup(spi); - spi_controller_put(spi->controller); kfree(spi->driver_override); kfree(spi); @@ -549,6 +545,12 @@ static int spi_dev_check(struct device *dev, void *data) return 0; }
+static void spi_cleanup(struct spi_device *spi) +{ + if (spi->controller->cleanup) + spi->controller->cleanup(spi); +} + /** * spi_add_device - Add spi_device allocated with spi_alloc_device * @spi: spi_device to register @@ -613,11 +615,13 @@ int spi_add_device(struct spi_device *spi)
/* Device may be bound to an active driver when this returns */ status = device_add(&spi->dev); - if (status < 0) + if (status < 0) { dev_err(dev, "can't add %s, status %d\n", dev_name(&spi->dev), status); - else + spi_cleanup(spi); + } else { dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev)); + }
done: mutex_unlock(&spi_add_lock); @@ -704,6 +708,8 @@ void spi_unregister_device(struct spi_device *spi) if (!spi) return;
+ spi_cleanup(spi); + if (spi->dev.of_node) { of_node_clear_flag(spi->dev.of_node, OF_POPULATED); of_node_put(spi->dev.of_node);
From: Jeimon jjjinmeng.zhou@gmail.com
[ Upstream commit 8ab78863e9eff11910e1ac8bcf478060c29b379e ]
The function rawsock_create() calls a privileged function sk_alloc(), which requires a ns-aware check to check net->user_ns, i.e., ns_capable(). However, the original code checks the init_user_ns using capable(). So we replace the capable() with ns_capable().
Signed-off-by: Jeimon jjjinmeng.zhou@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/nfc/rawsock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/nfc/rawsock.c b/net/nfc/rawsock.c index 23d5e56306a4..8d649f4aee79 100644 --- a/net/nfc/rawsock.c +++ b/net/nfc/rawsock.c @@ -333,7 +333,7 @@ static int rawsock_create(struct net *net, struct socket *sock, return -ESOCKTNOSUPPORT;
if (sock->type == SOCK_RAW) { - if (!capable(CAP_NET_RAW)) + if (!ns_capable(net->user_ns, CAP_NET_RAW)) return -EPERM; sock->ops = &rawsock_raw_ops; } else {
From: Dinghao Liu dinghao.liu@zju.edu.cn
[ Upstream commit e5b913496099527abe46e175e5e2c844367bded0 ]
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.
Reviewed-by: Peter Chen peter.chen@nxp.com Signed-off-by: Dinghao Liu dinghao.liu@zju.edu.cn Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/cdns3/gadget.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index c0c39cf30387..f32f00c49571 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -2706,8 +2706,10 @@ static int __cdns3_gadget_init(struct cdns3 *cdns) pm_runtime_get_sync(cdns->dev);
ret = cdns3_gadget_start(cdns); - if (ret) + if (ret) { + pm_runtime_put_sync(cdns->dev); return ret; + }
/* * Because interrupt line can be shared with other components in
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 28c268d3acdd4cbcd2ac320b85609e77f84e74a7 ]
Add a quirk for the Glavey TM800A550L tablet, this BYTCR tablet has no CHAN package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which is the default for BYTCR devices.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20210508150146.28403-1-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 46a81d4f0b2d..1e6c86f2306f 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -568,6 +568,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { /* Glavey TM800A550L */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), + /* Above strings are too generic, also match on BIOS version */ + DMI_MATCH(DMI_BIOS_VERSION, "ZY-8-BI-PX4S70VTR400-X423B-005-D"), + }, + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit f0353e1f53f92f7b3da91e6669f5d58ee222ebe8 ]
The Lenovo Miix 3-830 tablet has only 1 speaker, has an internal analog mic on IN1 and uses JD2 for jack-detect, add a quirk to automatically apply these settings on Lenovo Miix 3-830 tablets.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210508150146.28403-2-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 1e6c86f2306f..c67b86e2d0c0 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -646,6 +646,20 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_MONO_SPEAKER | BYT_RT5640_MCLK_EN), }, + { /* Lenovo Miix 3-830 */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 3-830"), + }, + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { /* Linx Linx7 tablet */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LINX"),
From: Eric Farman farman@linux.ibm.com
[ Upstream commit 2af7a834a435460d546f0cf0a8b8e4d259f1d910 ]
Today, the stacked call to vfio_ccw_sch_io_todo() does three things:
1) Update a solicited IRB with CP information, and release the CP if the interrupt was the end of a START operation. 2) Copy the IRB data into the io_region, under the protection of the io_mutex 3) Reset the vfio-ccw FSM state to IDLE to acknowledge that vfio-ccw can accept more work.
The trouble is that step 3 is (A) invoked for both solicited and unsolicited interrupts, and (B) sitting after the mutex for step 2. This second piece becomes a problem if it processes an interrupt for a CLEAR SUBCHANNEL while another thread initiates a START, thus allowing the CP and FSM states to get out of sync. That is:
CPU 1 CPU 2 fsm_do_clear() fsm_irq() fsm_io_request() vfio_ccw_sch_io_todo() fsm_io_helper()
Since the FSM state and CP should be kept in sync, let's make a note when the CP is released, and rely on that as an indication that the FSM should also be reset at the end of this routine and open up the device for more work.
Signed-off-by: Eric Farman farman@linux.ibm.com Acked-by: Matthew Rosato mjrosato@linux.ibm.com Reviewed-by: Cornelia Huck cohuck@redhat.com Message-Id: 20210511195631.3995081-4-farman@linux.ibm.com Signed-off-by: Cornelia Huck cohuck@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/cio/vfio_ccw_drv.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/s390/cio/vfio_ccw_drv.c b/drivers/s390/cio/vfio_ccw_drv.c index 339a6bc0339b..fd590d1cffc1 100644 --- a/drivers/s390/cio/vfio_ccw_drv.c +++ b/drivers/s390/cio/vfio_ccw_drv.c @@ -83,6 +83,7 @@ static void vfio_ccw_sch_io_todo(struct work_struct *work) struct vfio_ccw_private *private; struct irb *irb; bool is_final; + bool cp_is_finished = false;
private = container_of(work, struct vfio_ccw_private, io_work); irb = &private->irb; @@ -91,14 +92,21 @@ static void vfio_ccw_sch_io_todo(struct work_struct *work) (SCSW_ACTL_DEVACT | SCSW_ACTL_SCHACT)); if (scsw_is_solicited(&irb->scsw)) { cp_update_scsw(&private->cp, &irb->scsw); - if (is_final && private->state == VFIO_CCW_STATE_CP_PENDING) + if (is_final && private->state == VFIO_CCW_STATE_CP_PENDING) { cp_free(&private->cp); + cp_is_finished = true; + } } mutex_lock(&private->io_mutex); memcpy(private->io_region->irb_area, irb, sizeof(*irb)); mutex_unlock(&private->io_mutex);
- if (private->mdev && is_final) + /* + * Reset to IDLE only if processing of a channel program + * has finished. Do not overwrite a possible processing + * state if the final interrupt was for HSCH or CSCH. + */ + if (private->mdev && cp_is_finished) private->state = VFIO_CCW_STATE_IDLE;
if (private->io_trigger)
From: Zou Wei zou_wei@huawei.com
[ Upstream commit e072b2671606c77538d6a4dd5dda80b508cb4816 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.
Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Zou Wei zou_wei@huawei.com Link: https://lore.kernel.org/r/1620789145-14936-1-git-send-email-zou_wei@huawei.c... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/sti-sas.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/sti-sas.c b/sound/soc/codecs/sti-sas.c index ec9933b054ad..423daac9d5a9 100644 --- a/sound/soc/codecs/sti-sas.c +++ b/sound/soc/codecs/sti-sas.c @@ -411,6 +411,7 @@ static const struct of_device_id sti_sas_dev_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, sti_sas_dev_match);
static int sti_sas_driver_probe(struct platform_device *pdev) {
From: Chunyan Zhang chunyan.zhang@unisoc.com
[ Upstream commit 7907cad7d07e0055789ec0c534452f19dfe1fc80 ]
MODULE_DEVICE_TABLE is used to extract the device information out of the driver and builds a table when being compiled. If using this macro, kernel can find the driver if available when the device is plugged in, and then loads that driver and initializes the device.
Signed-off-by: Chunyan Zhang chunyan.zhang@unisoc.com Link: https://lore.kernel.org/r/20210512093534.243040-1-zhang.lyra@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-sprd.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/spi/spi-sprd.c b/drivers/spi/spi-sprd.c index c2bdf19ccdd2..44dc7b5b45ad 100644 --- a/drivers/spi/spi-sprd.c +++ b/drivers/spi/spi-sprd.c @@ -1066,6 +1066,7 @@ static const struct of_device_id sprd_spi_of_match[] = { { .compatible = "sprd,sc9860-spi", }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, sprd_spi_of_match);
static struct platform_driver sprd_spi_driver = { .driver = {
From: Zheyu Ma zheyuma97@gmail.com
[ Upstream commit 9f6f852550d0e1b7735651228116ae9d300f69b3 ]
'nj_setup' in netjet.c might fail with -EIO and in this case 'card->irq' is initialized and is bigger than zero. A subsequent call to 'nj_release' will free the irq that has not been requested.
Fix this bug by deleting the previous assignment to 'card->irq' and just keep the assignment before 'request_irq'.
The KASAN's log reveals it:
[ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826 free_irq+0x100/0x480 [ 3.355112 ] Modules linked in: [ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.356552 ] RIP: 0010:free_irq+0x100/0x480 [ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4: 00000000000006f0 [ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.362175 ] Call Trace: [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ... [ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.362175 ] Call Trace: [ 3.362175 ] dump_stack+0xba/0xf5 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] panic+0x15a/0x3f2 [ 3.362175 ] ? __warn+0xf2/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] __warn+0x108/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] report_bug+0x119/0x1c0 [ 3.362175 ] handle_bug+0x3b/0x80 [ 3.362175 ] exc_invalid_op+0x18/0x70 [ 3.362175 ] asm_exc_invalid_op+0x12/0x20 [ 3.362175 ] RIP: 0010:free_irq+0x100/0x480 [ 3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.362175 ] ? vprintk+0x76/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Dumping ftrace buffer: [ 3.362175 ] (ftrace buffer empty) [ 3.362175 ] Kernel Offset: disabled [ 3.362175 ] Rebooting in 1 seconds..
Reported-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/isdn/hardware/mISDN/netjet.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c index 61caa7e50b9a..9e6aab04f9d6 100644 --- a/drivers/isdn/hardware/mISDN/netjet.c +++ b/drivers/isdn/hardware/mISDN/netjet.c @@ -1100,7 +1100,6 @@ nj_probe(struct pci_dev *pdev, const struct pci_device_id *ent) card->typ = NETJET_S_TJ300;
card->base = pci_resource_start(pdev, 0); - card->irq = pdev->irq; pci_set_drvdata(pdev, card); err = setup_instance(card); if (err)
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit 35d96e631860226d5dc4de0fad0a415362ec2457 ]
If bond_kobj_init() or later kzalloc() in bond_alloc_slave() fail, then we call kobject_put() on the slave->kobj. This in turn calls the release function slave_kobj_release() which will always try to cancel_delayed_work_sync(&slave->notify_work), which shouldn't be done on an uninitialized work struct.
Always initialize the work struct earlier to avoid problems here.
Syzbot bisected this down to a completely pointless commit, some fault injection may have been at work here that caused the alloc failure in the first place, which may interact badly with bisect.
Reported-by: syzbot+bfda097c12a00c8cae67@syzkaller.appspotmail.com Signed-off-by: Johannes Berg johannes.berg@intel.com Acked-by: Jay Vosburgh jay.vosburgh@canonical.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 2bc4cb9e3095..e21643377162 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1335,6 +1335,7 @@ static struct slave *bond_alloc_slave(struct bonding *bond,
slave->bond = bond; slave->dev = slave_dev; + INIT_DELAYED_WORK(&slave->notify_work, bond_netdev_notify_work);
if (bond_kobj_init(slave)) return NULL; @@ -1347,7 +1348,6 @@ static struct slave *bond_alloc_slave(struct bonding *bond, return NULL; } } - INIT_DELAYED_WORK(&slave->notify_work, bond_netdev_notify_work);
return slave; }
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit 1d482e666b8e74c7555dbdfbfb77205eeed3ff2d ]
Syzbot reports that in mac80211 we have a potential deadlock between our "local->stop_queue_reasons_lock" (spinlock) and netlink's nl_table_lock (rwlock). This is because there's at least one situation in which we might try to send a netlink message with this spinlock held while it is also possible to take the spinlock from a hardirq context, resulting in the following deadlock scenario reported by lockdep:
CPU0 CPU1 ---- ---- lock(nl_table_lock); local_irq_disable(); lock(&local->queue_stop_reason_lock); lock(nl_table_lock); <Interrupt> lock(&local->queue_stop_reason_lock);
This seems valid, we can take the queue_stop_reason_lock in any kind of context ("CPU0"), and call ieee80211_report_ack_skb() with the spinlock held and IRQs disabled ("CPU1") in some code path (ieee80211_do_stop() via ieee80211_free_txskb()).
Short of disallowing netlink use in scenarios like these (which would be rather complex in mac80211's case due to the deep callchain), it seems the only fix for this is to disable IRQs while nl_table_lock is held to avoid hitting this scenario, this disallows the "CPU0" portion of the reported deadlock.
Note that the writer side (netlink_table_grab()) already disables IRQs for this lock.
Unfortunately though, this seems like a huge hammer, and maybe the whole netlink table locking should be reworked.
Reported-by: syzbot+69ff9dff50dcfe14ddd4@syzkaller.appspotmail.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/netlink/af_netlink.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index c2a5174387ff..9d993b4cf1af 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -452,11 +452,13 @@ void netlink_table_ungrab(void) static inline void netlink_lock_table(void) { + unsigned long flags; + /* read_lock() synchronizes us to netlink_table_grab */
- read_lock(&nl_table_lock); + read_lock_irqsave(&nl_table_lock, flags); atomic_inc(&nl_table_users); - read_unlock(&nl_table_lock); + read_unlock_irqrestore(&nl_table_lock, flags); }
static inline void
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ]
We spotted a bug recently during a review where a driver was unregistering a bus that wasn't registered, which would trigger this BUG_ON(). Let's handle that situation more gracefully, and just print a warning and return.
Reported-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Reviewed-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/mdio_bus.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 229e480179ff..5bf06eac04ba 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -453,7 +453,8 @@ void mdiobus_unregister(struct mii_bus *bus) struct mdio_device *mdiodev; int i;
- BUG_ON(bus->state != MDIOBUS_REGISTERED); + if (WARN_ON_ONCE(bus->state != MDIOBUS_REGISTERED)) + return; bus->state = MDIOBUS_UNREGISTERED;
for (i = 0; i < PHY_MAX_ADDR; i++) {
From: Shakeel Butt shakeelb@google.com
[ Upstream commit 45e1ba40837ac2f6f4d4716bddb8d44bd7e4a251 ]
This patch effectively reverts the commit a3e72739b7a7 ("cgroup: fix too early usage of static_branch_disable()"). The commit 6041186a3258 ("init: initialize jump labels before command line option parsing") has moved the jump_label_init() before parse_args() which has made the commit a3e72739b7a7 unnecessary. On the other hand there are consequences of disabling the controllers later as there are subsystems doing the controller checks for different decisions. One such incident is reported [1] regarding the memory controller and its impact on memory reclaim code.
[1] https://lore.kernel.org/linux-mm/921e53f3-4b13-aab8-4a9e-e83ff15371e4@nec.co...
Signed-off-by: Shakeel Butt shakeelb@google.com Reported-by: NOMURA JUNICHI(野村 淳一) junichi.nomura@nec.com Signed-off-by: Tejun Heo tj@kernel.org Tested-by: Jun'ichi Nomura junichi.nomura@nec.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/cgroup/cgroup.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c index 37db8eba149a..ede370ec245d 100644 --- a/kernel/cgroup/cgroup.c +++ b/kernel/cgroup/cgroup.c @@ -5721,8 +5721,6 @@ int __init cgroup_init_early(void) return 0; }
-static u16 cgroup_disable_mask __initdata; - /** * cgroup_init - cgroup initialization * @@ -5781,12 +5779,8 @@ int __init cgroup_init(void) * disabled flag and cftype registration needs kmalloc, * both of which aren't available during early_init. */ - if (cgroup_disable_mask & (1 << ssid)) { - static_branch_disable(cgroup_subsys_enabled_key[ssid]); - printk(KERN_INFO "Disabling %s control group subsystem\n", - ss->name); + if (!cgroup_ssid_enabled(ssid)) continue; - }
if (cgroup1_ssid_disabled(ssid)) printk(KERN_INFO "Disabling %s control group subsystem in v1 mounts\n", @@ -6173,7 +6167,10 @@ static int __init cgroup_disable(char *str) if (strcmp(token, ss->name) && strcmp(token, ss->legacy_name)) continue; - cgroup_disable_mask |= 1 << i; + + static_branch_disable(cgroup_subsys_enabled_key[i]); + pr_info("Disabling %s control group subsystem\n", + ss->name); } } return 1;
From: Sergey Senozhatsky senozhatsky@chromium.org
[ Upstream commit 940d71c6462e8151c78f28e4919aa8882ff2054e ]
If VCPU is suspended (VM suspend) in wq_watchdog_timer_fn() then once this VCPU resumes it will see the new jiffies value, while it may take a while before IRQ detects PVCLOCK_GUEST_STOPPED on this VCPU and updates all the watchdogs via pvclock_touch_watchdogs(). There is a small chance of misreported WQ stalls in the meantime, because new jiffies is time_after() old 'ts + thresh'.
wq_watchdog_timer_fn() { for_each_pool(pool, pi) { if (time_after(jiffies, ts + thresh)) { pr_emerg("BUG: workqueue lockup - pool"); } } }
Save jiffies at the beginning of this function and use that value for stall detection. If VM gets suspended then we continue using "old" jiffies value and old WQ touch timestamps. If IRQ at some point restarts the stall detection cycle (pvclock_touch_watchdogs()) then old jiffies will always be before new 'ts + thresh'.
Signed-off-by: Sergey Senozhatsky senozhatsky@chromium.org Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/workqueue.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 5d7092e32912..8f41499d8257 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -50,6 +50,7 @@ #include <linux/uaccess.h> #include <linux/sched/isolation.h> #include <linux/nmi.h> +#include <linux/kvm_para.h>
#include "workqueue_internal.h"
@@ -5734,6 +5735,7 @@ static void wq_watchdog_timer_fn(struct timer_list *unused) { unsigned long thresh = READ_ONCE(wq_watchdog_thresh) * HZ; bool lockup_detected = false; + unsigned long now = jiffies; struct worker_pool *pool; int pi;
@@ -5748,6 +5750,12 @@ static void wq_watchdog_timer_fn(struct timer_list *unused) if (list_empty(&pool->worklist)) continue;
+ /* + * If a virtual machine is stopped by the host it can look to + * the watchdog like a stall. + */ + kvm_check_and_clear_guest_paused(); + /* get the latest of pool and touched timestamps */ pool_ts = READ_ONCE(pool->watchdog_ts); touched = READ_ONCE(wq_watchdog_touched); @@ -5766,12 +5774,12 @@ static void wq_watchdog_timer_fn(struct timer_list *unused) }
/* did we stall? */ - if (time_after(jiffies, ts + thresh)) { + if (time_after(now, ts + thresh)) { lockup_detected = true; pr_emerg("BUG: workqueue lockup - pool"); pr_cont_pool_info(pool); pr_cont(" stuck for %us!\n", - jiffies_to_msecs(jiffies - pool_ts) / 1000); + jiffies_to_msecs(now - pool_ts) / 1000); } }
From: Zheyu Ma zheyuma97@gmail.com
[ Upstream commit 13a6f3153922391e90036ba2267d34eed63196fc ]
When calling the 'ql_sem_spinlock', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context.
This bug can be fixed by using 'mdelay' instead of 'ssleep'.
The KASAN's log reveals it:
[ 3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002 [ 3.238748 ] 2 locks held by swapper/0/1: [ 3.239151 ] #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x41/0x60 [ 3.240026 ] #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at: ql3xxx_probe+0x2aa/0xea0 [ 3.240873 ] Modules linked in: [ 3.241187 ] irq event stamp: 460854 [ 3.241541 ] hardirqs last enabled at (460853): [<ffffffff843051bf>] _raw_spin_unlock_irqrestore+0x4f/0x70 [ 3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>] _raw_spin_lock_irqsave+0x2a/0x70 [ 3.242245 ] softirqs last enabled at (446076): [<ffffffff846002e4>] __do_softirq+0x2e4/0x4b1 [ 3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>] irq_exit_rcu+0x100/0x110 [ 3.242245 ] Preemption disabled at: [ 3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] Kernel panic - not syncing: scheduling while atomic [ 3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00145 -gee7dc339169-dirty #16 [ 3.242245 ] Call Trace: [ 3.242245 ] dump_stack+0xba/0xf5 [ 3.242245 ] ? ql3xxx_probe+0x1f0/0xea0 [ 3.242245 ] panic+0x15a/0x3f2 [ 3.242245 ] ? vprintk+0x76/0x150 [ 3.242245 ] ? ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] __schedule_bug+0xae/0xe0 [ 3.242245 ] __schedule+0x72e/0xa00 [ 3.242245 ] schedule+0x43/0xf0 [ 3.242245 ] schedule_timeout+0x28b/0x500 [ 3.242245 ] ? del_timer_sync+0xf0/0xf0 [ 3.242245 ] ? msleep+0x2f/0x70 [ 3.242245 ] msleep+0x59/0x70 [ 3.242245 ] ql3xxx_probe+0x307/0xea0 [ 3.242245 ] ? _raw_spin_unlock_irqrestore+0x3a/0x70 [ 3.242245 ] ? pci_device_remove+0x110/0x110 [ 3.242245 ] local_pci_probe+0x45/0xa0 [ 3.242245 ] pci_device_probe+0x12b/0x1d0 [ 3.242245 ] really_probe+0x2a9/0x610 [ 3.242245 ] driver_probe_device+0x90/0x1d0 [ 3.242245 ] ? mutex_lock_nested+0x1b/0x20 [ 3.242245 ] device_driver_attach+0x68/0x70 [ 3.242245 ] __driver_attach+0x124/0x1b0 [ 3.242245 ] ? device_driver_attach+0x70/0x70 [ 3.242245 ] bus_for_each_dev+0xbb/0x110 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] driver_attach+0x27/0x30 [ 3.242245 ] bus_add_driver+0x1eb/0x2a0 [ 3.242245 ] driver_register+0xa9/0x180 [ 3.242245 ] __pci_register_driver+0x82/0x90 [ 3.242245 ] ? yellowfin_init+0x25/0x25 [ 3.242245 ] ql3xxx_driver_init+0x23/0x25 [ 3.242245 ] do_one_initcall+0x7f/0x3d0 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.242245 ] kernel_init_freeable+0x2aa/0x301 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] kernel_init+0x18/0x190 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ret_from_fork+0x1f/0x30 [ 3.242245 ] Dumping ftrace buffer: [ 3.242245 ] (ftrace buffer empty) [ 3.242245 ] Kernel Offset: disabled [ 3.242245 ] Rebooting in 1 seconds.
Reported-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qla3xxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c index 986f26578d34..5dc36c51636c 100644 --- a/drivers/net/ethernet/qlogic/qla3xxx.c +++ b/drivers/net/ethernet/qlogic/qla3xxx.c @@ -115,7 +115,7 @@ static int ql_sem_spinlock(struct ql3_adapter *qdev, value = readl(&port_regs->CommonRegs.semaphoreReg); if ((value & (sem_mask >> 16)) == sem_bits) return 0; - ssleep(1); + mdelay(1000); } while (--seconds); return -1; }
From: Rao Shoaib rao.shoaib@oracle.com
[ Upstream commit aced3ce57cd37b5ca332bcacd370d01f5a8c5371 ]
When TCP is used as transport and a program on the system connects to RDS port 16385, connection is accepted but denied per the rules of RDS. However, RDS connections object is left in the list. Next loopback connection will select that connection object as it is at the head of list. The connection attempt will hang as the connection object is set to connect over TCP which is not allowed
The issue can be reproduced easily, use rds-ping to ping a local IP address. After that use any program like ncat to connect to the same IP address and port 16385. This will hang so ctrl-c out. Now try rds-ping, it will hang.
To fix the issue this patch adds checks to disallow the connection object creation and destroys the connection object.
Signed-off-by: Rao Shoaib rao.shoaib@oracle.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/rds/connection.c | 23 +++++++++++++++++------ net/rds/tcp.c | 4 ++-- net/rds/tcp.h | 3 ++- net/rds/tcp_listen.c | 6 ++++++ 4 files changed, 27 insertions(+), 9 deletions(-)
diff --git a/net/rds/connection.c b/net/rds/connection.c index ed7f2133acc2..c85bd6340eaa 100644 --- a/net/rds/connection.c +++ b/net/rds/connection.c @@ -240,12 +240,23 @@ static struct rds_connection *__rds_conn_create(struct net *net, if (loop_trans) { rds_trans_put(loop_trans); conn->c_loopback = 1; - if (is_outgoing && trans->t_prefer_loopback) { - /* "outgoing" connection - and the transport - * says it wants the connection handled by the - * loopback transport. This is what TCP does. - */ - trans = &rds_loop_transport; + if (trans->t_prefer_loopback) { + if (likely(is_outgoing)) { + /* "outgoing" connection to local address. + * Protocol says it wants the connection + * handled by the loopback transport. + * This is what TCP does. + */ + trans = &rds_loop_transport; + } else { + /* No transport currently in use + * should end up here, but if it + * does, reset/destroy the connection. + */ + kmem_cache_free(rds_conn_slab, conn); + conn = ERR_PTR(-EOPNOTSUPP); + goto out; + } } }
diff --git a/net/rds/tcp.c b/net/rds/tcp.c index 66121bc6f34e..1402e9166a7e 100644 --- a/net/rds/tcp.c +++ b/net/rds/tcp.c @@ -323,8 +323,8 @@ static void rds6_tcp_tc_info(struct socket *sock, unsigned int len, } #endif
-static int rds_tcp_laddr_check(struct net *net, const struct in6_addr *addr, - __u32 scope_id) +int rds_tcp_laddr_check(struct net *net, const struct in6_addr *addr, + __u32 scope_id) { struct net_device *dev = NULL; #if IS_ENABLED(CONFIG_IPV6) diff --git a/net/rds/tcp.h b/net/rds/tcp.h index 3c69361d21c7..4620549ecbeb 100644 --- a/net/rds/tcp.h +++ b/net/rds/tcp.h @@ -60,7 +60,8 @@ u32 rds_tcp_snd_una(struct rds_tcp_connection *tc); u64 rds_tcp_map_seq(struct rds_tcp_connection *tc, u32 seq); extern struct rds_transport rds_tcp_transport; void rds_tcp_accept_work(struct sock *sk); - +int rds_tcp_laddr_check(struct net *net, const struct in6_addr *addr, + __u32 scope_id); /* tcp_connect.c */ int rds_tcp_conn_path_connect(struct rds_conn_path *cp); void rds_tcp_conn_path_shutdown(struct rds_conn_path *conn); diff --git a/net/rds/tcp_listen.c b/net/rds/tcp_listen.c index 810a3a49e947..26a3e18e460d 100644 --- a/net/rds/tcp_listen.c +++ b/net/rds/tcp_listen.c @@ -198,6 +198,12 @@ int rds_tcp_accept_one(struct socket *sock) } #endif
+ if (!rds_tcp_laddr_check(sock_net(sock->sk), peer_addr, dev_if)) { + /* local address connection is only allowed via loopback */ + ret = -EOPNOTSUPP; + goto out; + } + conn = rds_conn_create(sock_net(sock->sk), my_addr, peer_addr, &rds_tcp_transport, 0, GFP_KERNEL, dev_if);
From: Javed Hasan jhasan@marvell.com
[ Upstream commit 122c81c563b0c1c6b15ff76a9159af5ee1f21563 ]
Return failure from bnx2fc_eh_abort() if io_req is already in ABTS processing.
Link: https://lore.kernel.org/r/20210519061416.19321-1-jhasan@marvell.com Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Javed Hasan jhasan@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/bnx2fc/bnx2fc_io.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c index 401743e2b429..a0e776414889 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_io.c +++ b/drivers/scsi/bnx2fc/bnx2fc_io.c @@ -1219,6 +1219,7 @@ int bnx2fc_eh_abort(struct scsi_cmnd *sc_cmd) was a result from the ABTS request rather than the CLEANUP request */ set_bit(BNX2FC_FLAG_IO_CLEANUP, &io_req->req_flags); + rc = FAILED; goto done; }
From: Matt Wang wwentao@vmware.com
[ Upstream commit e662502b3a782d479e67736a5a1c169a703d853a ]
Some commands (such as INQUIRY) may return less data than the initiator requested. To avoid conducting useless information, set the right residual count to make upper layer aware of this.
Before (INQUIRY PAGE 0xB0 with 128B buffer):
$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00 SCSI Status: Good
Received 128 bytes of data: 00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............ 10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@.... 20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... ..... 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
After:
$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00 SCSI Status: Good
Received 64 bytes of data: 00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............ 10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@.... 20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... ..... 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[mkp: clarified description]
Link: https://lore.kernel.org/r/03C41093-B62E-43A2-913E-CFC92F1C70C3@vmware.com Signed-off-by: Matt Wang wwentao@vmware.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/vmw_pvscsi.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c index 70008816c91f..0ac342b1deb9 100644 --- a/drivers/scsi/vmw_pvscsi.c +++ b/drivers/scsi/vmw_pvscsi.c @@ -574,7 +574,13 @@ static void pvscsi_complete_request(struct pvscsi_adapter *adapter, case BTSTAT_SUCCESS: case BTSTAT_LINKED_COMMAND_COMPLETED: case BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG: - /* If everything went fine, let's move on.. */ + /* + * Commands like INQUIRY may transfer less data than + * requested by the initiator via bufflen. Set residual + * count to make upper layer aware of the actual amount + * of data returned. + */ + scsi_set_resid(cmd, scsi_bufflen(cmd) - e->dataLen); cmd->result = (DID_OK << 16); break;
From: Yang Yingliang yangyingliang@huawei.com
[ Upstream commit 7907a021e4bbfa29cccacd2ba2dade894d9a7d4c ]
irqs allocated with devm_request_irq() should not be freed using free_irq(). Doing so causes a dangling pointer and a subsequent double free.
Link: https://lore.kernel.org/r/20210519130519.2661938-1-yangyingliang@huawei.com Reported-by: Hulk Robot hulkci@huawei.com Acked-by: John Garry john.garry@huawei.com Signed-off-by: Yang Yingliang yangyingliang@huawei.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 723f51c822af..916447f3c607 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -3274,14 +3274,14 @@ hisi_sas_v3_destroy_irqs(struct pci_dev *pdev, struct hisi_hba *hisi_hba) { int i;
- free_irq(pci_irq_vector(pdev, 1), hisi_hba); - free_irq(pci_irq_vector(pdev, 2), hisi_hba); - free_irq(pci_irq_vector(pdev, 11), hisi_hba); + devm_free_irq(&pdev->dev, pci_irq_vector(pdev, 1), hisi_hba); + devm_free_irq(&pdev->dev, pci_irq_vector(pdev, 2), hisi_hba); + devm_free_irq(&pdev->dev, pci_irq_vector(pdev, 11), hisi_hba); for (i = 0; i < hisi_hba->cq_nvecs; i++) { struct hisi_sas_cq *cq = &hisi_hba->cq[i]; int nr = hisi_sas_intr_conv ? 16 : 16 + i;
- free_irq(pci_irq_vector(pdev, nr), cq); + devm_free_irq(&pdev->dev, pci_irq_vector(pdev, nr), cq); } pci_free_irq_vectors(pdev); }
From: Dmitry Bogdanov d.bogdanov@yadro.com
[ Upstream commit 2ef7665dfd88830f15415ba007c7c9a46be7acd8 ]
Target de-configuration panics at high CPU load because TPGT and WWPN can be removed on separate threads.
TPGT removal requests a reset HBA on a separate thread and waits for reset complete (phase1). Due to high CPU load that HBA reset can be delayed for some time.
WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has already completed and thus tgt.tgt_ops is subsequently cleared. However, tgt.tgt_ops is needed to process incoming traffic and therefore this will cause one of the following panics:
NIP qlt_reset+0x7c/0x220 [qla2xxx] LR qlt_reset+0x68/0x220 [qla2xxx] Call Trace: 0xc000003ffff63a78 (unreliable) qlt_handle_imm_notify+0x800/0x10c0 [qla2xxx] qlt_24xx_atio_pkt+0x208/0x590 [qla2xxx] qlt_24xx_process_atio_queue+0x33c/0x7a0 [qla2xxx] qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]
or
NIP qlt_24xx_handle_abts+0xd0/0x2a0 [qla2xxx] LR qlt_24xx_handle_abts+0xb4/0x2a0 [qla2xxx] Call Trace: qlt_24xx_handle_abts+0x90/0x2a0 [qla2xxx] (unreliable) qlt_24xx_process_atio_queue+0x500/0x7a0 [qla2xxx] qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]
or
NIP qlt_create_sess+0x90/0x4e0 [qla2xxx] LR qla24xx_do_nack_work+0xa8/0x180 [qla2xxx] Call Trace: 0xc0000000348fba30 (unreliable) qla24xx_do_nack_work+0xa8/0x180 [qla2xxx] qla2x00_do_work+0x674/0xbf0 [qla2xxx] qla2x00_iocb_work_fn
The patch fixes the issue by serializing qlt_stop_phase1() and qlt_stop_phase2() functions to make WWPN removal wait for phase1 completion.
Link: https://lore.kernel.org/r/20210415203554.27890-1-d.bogdanov@yadro.com Reviewed-by: Roman Bolshakov r.bolshakov@yadro.com Signed-off-by: Dmitry Bogdanov d.bogdanov@yadro.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_target.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 509539ec58e9..57068e2faef5 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -1559,10 +1559,12 @@ void qlt_stop_phase2(struct qla_tgt *tgt) return; }
+ mutex_lock(&tgt->ha->optrom_mutex); mutex_lock(&vha->vha_tgt.tgt_mutex); tgt->tgt_stop = 0; tgt->tgt_stopped = 1; mutex_unlock(&vha->vha_tgt.tgt_mutex); + mutex_unlock(&tgt->ha->optrom_mutex);
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf00c, "Stop of tgt %p finished\n", tgt);
From: Zong Li zong.li@sifive.com
[ Upstream commit 5eff1461a6dec84f04fafa9128548bad51d96147 ]
If runtime power menagement is enabled, the gigabit ethernet PLL would be disabled after macb_probe(). During this period of time, the system would hang up if we try to access GEMGXL control registers.
We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context"). Add netif_running checking to ensure the device is available before accessing GEMGXL device.
Changed in v2: - Use netif_running instead of its own flag
Signed-off-by: Zong Li zong.li@sifive.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/cadence/macb_main.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 377668465535..ebd0853a6f31 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -2536,6 +2536,9 @@ static struct net_device_stats *gem_get_stats(struct macb *bp) struct gem_stats *hwstat = &bp->hw_stats.gem; struct net_device_stats *nstat = &bp->dev->stats;
+ if (!netif_running(bp->dev)) + return nstat; + gem_update_stats(bp);
nstat->rx_errors = (hwstat->rx_frame_check_sequence_errors +
From: Saubhik Mukherjee saubhik.mukherjee@gmail.com
[ Upstream commit a4dd4fc6105e54393d637450a11d4cddb5fabc4f ]
In cops_probe1(), there is a write to dev->base_addr after requesting an interrupt line and registering the interrupt handler cops_interrupt(). The handler might be called in parallel to handle an interrupt. cops_interrupt() tries to read dev->base_addr leading to a potential data race. So write to dev->base_addr before calling request_irq().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Saubhik Mukherjee saubhik.mukherjee@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/appletalk/cops.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index b3c63d2f16aa..5c89c2eff891 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -325,6 +325,8 @@ static int __init cops_probe1(struct net_device *dev, int ioaddr) break; }
+ dev->base_addr = ioaddr; + /* Reserve any actual interrupt. */ if (dev->irq) { retval = request_irq(dev->irq, cops_interrupt, 0, dev->name, dev); @@ -332,8 +334,6 @@ static int __init cops_probe1(struct net_device *dev, int ioaddr) goto err_out; }
- dev->base_addr = ioaddr; - lp = netdev_priv(dev); spin_lock_init(&lp->lock);
From: George McCollister george.mccollister@gmail.com
[ Upstream commit 8c42a49738f16af0061f9ae5c2f5a955f268d9e3 ]
Also enable phy errata workaround on 9567 since has the same errata as the 9477 according to the manufacture's documentation.
Signed-off-by: George McCollister george.mccollister@gmail.com Reviewed-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/microchip/ksz9477.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 49ab1346dc3f..0370e71ed6e0 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -1520,6 +1520,7 @@ static const struct ksz_chip_data ksz9477_switch_chips[] = { .num_statics = 16, .cpu_ports = 0x7F, /* can be configured as cpu port */ .port_cnt = 7, /* total physical port count */ + .phy_errata_9477 = true, }, };
From: Hannes Reinecke hare@suse.de
[ Upstream commit 4d9442bf263ac45d495bb7ecf75009e59c0622b2 ]
Add an additional decoding for 'host pathing error' during connect.
Signed-off-by: Hannes Reinecke hare@suse.de Reviewed-by: Sagi Grimberg sagi@grimberg.me Reviewed-by: Chaitanya Kulkarni chaitanya.kulkarni@wdc.com Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/fabrics.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c index 3bb71f177dfd..d884187d7706 100644 --- a/drivers/nvme/host/fabrics.c +++ b/drivers/nvme/host/fabrics.c @@ -336,6 +336,11 @@ static void nvmf_log_connect_error(struct nvme_ctrl *ctrl, cmd->connect.recfmt); break;
+ case NVME_SC_HOST_PATH_ERROR: + dev_err(ctrl->device, + "Connect command failed: host path error\n"); + break; + default: dev_err(ctrl->device, "Connect command failed, error wo/DNR bit: %d\n",
From: Tiezhu Yang yangtiezhu@loongson.cn
[ Upstream commit 78cf0eb926cb1abeff2106bae67752e032fe5f3e ]
When update the latest mainline kernel with the following three configs, the kernel hangs during startup:
(1) CONFIG_FUNCTION_GRAPH_TRACER=y (2) CONFIG_PREEMPT_TRACER=y (3) CONFIG_FTRACE_STARTUP_TEST=y
When update the latest mainline kernel with the above two configs (1) and (2), the kernel starts normally, but it still hangs when execute the following command:
echo "function_graph" > /sys/kernel/debug/tracing/current_tracer
Without CONFIG_PREEMPT_TRACER=y, the above two kinds of kernel hangs disappeared, so it seems that CONFIG_PREEMPT_TRACER has some influences with function_graph tracer at the first glance.
I use ejtag to find out the epc address is related with preempt_enable() in the file arch/mips/lib/mips-atomic.c, because function tracing can trace the preempt_{enable,disable} calls that are traced, replace them with preempt_{enable,disable}_notrace to prevent function tracing from going into an infinite loop, and then it can fix the kernel hang issue.
By the way, it seems that this commit is a complement and improvement of commit f93a1a00f2bd ("MIPS: Fix crash that occurs when function tracing is enabled").
Signed-off-by: Tiezhu Yang yangtiezhu@loongson.cn Cc: Steven Rostedt rostedt@goodmis.org Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/lib/mips-atomic.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c index 5530070e0d05..57497a26e79c 100644 --- a/arch/mips/lib/mips-atomic.c +++ b/arch/mips/lib/mips-atomic.c @@ -37,7 +37,7 @@ */ notrace void arch_local_irq_disable(void) { - preempt_disable(); + preempt_disable_notrace();
__asm__ __volatile__( " .set push \n" @@ -53,7 +53,7 @@ notrace void arch_local_irq_disable(void) : /* no inputs */ : "memory");
- preempt_enable(); + preempt_enable_notrace(); } EXPORT_SYMBOL(arch_local_irq_disable);
@@ -61,7 +61,7 @@ notrace unsigned long arch_local_irq_save(void) { unsigned long flags;
- preempt_disable(); + preempt_disable_notrace();
__asm__ __volatile__( " .set push \n" @@ -78,7 +78,7 @@ notrace unsigned long arch_local_irq_save(void) : /* no inputs */ : "memory");
- preempt_enable(); + preempt_enable_notrace();
return flags; } @@ -88,7 +88,7 @@ notrace void arch_local_irq_restore(unsigned long flags) { unsigned long __tmp1;
- preempt_disable(); + preempt_disable_notrace();
__asm__ __volatile__( " .set push \n" @@ -106,7 +106,7 @@ notrace void arch_local_irq_restore(unsigned long flags) : "0" (flags) : "memory");
- preempt_enable(); + preempt_enable_notrace(); } EXPORT_SYMBOL(arch_local_irq_restore);
From: John Keeping john@metanate.com
[ Upstream commit 0c1f3193b1cdd21e7182f97dc9bca7d284d18a15 ]
The third parameter of module_param() is permissions for the sysfs node but it looks like it is being used as the initial value of the parameter here. In fact, false here equates to omitting the file from sysfs and does not affect the value of require_signatures.
Making the parameter writable is not simple because going from false->true is fine but it should not be possible to remove the requirement to verify a signature. But it can be useful to inspect the value of this parameter from userspace, so change the permissions to make a read-only file in sysfs.
Signed-off-by: John Keeping john@metanate.com Signed-off-by: Mike Snitzer snitzer@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-verity-verify-sig.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/md/dm-verity-verify-sig.c b/drivers/md/dm-verity-verify-sig.c index 614e43db93aa..919154ae4cae 100644 --- a/drivers/md/dm-verity-verify-sig.c +++ b/drivers/md/dm-verity-verify-sig.c @@ -15,7 +15,7 @@ #define DM_VERITY_VERIFY_ERR(s) DM_VERITY_ROOT_HASH_VERIFICATION " " s
static bool require_signatures; -module_param(require_signatures, bool, false); +module_param(require_signatures, bool, 0444); MODULE_PARM_DESC(require_signatures, "Verify the roothash of dm-verity hash tree");
From: Jiapeng Chong jiapeng.chong@linux.alibaba.com
[ Upstream commit 65161c35554f7135e6656b3df1ce2c500ca0bdcf ]
Eliminate the follow smatch warning:
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227 bnx2x_iov_init_one() warn: missing error code 'err'.
Reported-by: Abaci Robot abaci@linux.alibaba.com Signed-off-by: Jiapeng Chong jiapeng.chong@linux.alibaba.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 5097a44686b3..cf39623b828b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1245,8 +1245,10 @@ int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, goto failed;
/* SR-IOV capability was enabled but there are no VFs*/ - if (iov->total == 0) + if (iov->total == 0) { + err = -EINVAL; goto failed; + }
iov->nr_virtfn = min_t(u16, iov->total, num_vfs_param);
From: Sagi Grimberg sagi@grimberg.me
[ Upstream commit 042a3eaad6daeabcfaf163aa44da8ea3cf8b5496 ]
We need to select NVME_CORE.
Signed-off-by: Sagi Grimberg sagi@grimberg.me Reviewed-by: Max Gurtovoy mgurtovoy@nvidia.com Reviewed-by: Chaitanya Kulkarni chaitanya.kulkarni@wdc.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/host/Kconfig b/drivers/nvme/host/Kconfig index 7b3f6555e67b..cf0ae71c489e 100644 --- a/drivers/nvme/host/Kconfig +++ b/drivers/nvme/host/Kconfig @@ -62,7 +62,8 @@ config NVME_FC config NVME_TCP tristate "NVM Express over Fabrics TCP host driver" depends on INET - depends on BLK_DEV_NVME + depends on BLOCK + select NVME_CORE select NVME_FABRICS select CRYPTO select CRYPTO_CRC32C
From: Chris Packham chris.packham@alliedtelesis.co.nz
[ Upstream commit 7adc7b225cddcfd0f346d10144fd7a3d3d9f9ea7 ]
The i2c controllers on the P2040/P2041 have an erratum where the documented scheme for i2c bus recovery will not work (A-004447). A different mechanism is needed which is documented in the P2040 Chip Errata Rev Q (latest available at the time of writing).
Signed-off-by: Chris Packham chris.packham@alliedtelesis.co.nz Acked-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index 872e4485dc3f..ddc018d42252 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -371,7 +371,23 @@ sdhc@114000 { };
/include/ "qoriq-i2c-0.dtsi" + i2c@118000 { + fsl,i2c-erratum-a004447; + }; + + i2c@118100 { + fsl,i2c-erratum-a004447; + }; + /include/ "qoriq-i2c-1.dtsi" + i2c@119000 { + fsl,i2c-erratum-a004447; + }; + + i2c@119100 { + fsl,i2c-erratum-a004447; + }; + /include/ "qoriq-duart-0.dtsi" /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi"
From: Chris Packham chris.packham@alliedtelesis.co.nz
[ Upstream commit 19ae697a1e4edf1d755b413e3aa38da65e2db23b ]
The i2c controllers on the P1010 have an erratum where the documented scheme for i2c bus recovery will not work (A-004447). A different mechanism is needed which is documented in the P1010 Chip Errata Rev L.
Signed-off-by: Chris Packham chris.packham@alliedtelesis.co.nz Acked-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi index 1b4aafc1f6a2..9716a0484ecf 100644 --- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -122,7 +122,15 @@ memory-controller@2000 { };
/include/ "pq3-i2c-0.dtsi" + i2c@3000 { + fsl,i2c-erratum-a004447; + }; + /include/ "pq3-i2c-1.dtsi" + i2c@3100 { + fsl,i2c-erratum-a004447; + }; + /include/ "pq3-duart-0.dtsi" /include/ "pq3-espi-0.dtsi" spi0: spi@7000 {
linux-stable-mirror@lists.linaro.org
-
Sasha Levin