The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 49012d1bf5f78782d398adb984a080a88ba42965 Mon Sep 17 00:00:00 2001

From: Boris Brezillon boris.brezillon@bootlin.com Date: Thu, 8 Feb 2018 14:43:35 +0100 Subject: [PATCH] clk: bcm2835: Fix ana->maskX definitions

ana->maskX values are already '~'-ed in bcm2835_pll_set_rate(). Remove the '~' in the definition to fix ANA setup.

Note that this commit fixes a long standing bug preventing one from using an HDMI display if it's plugged after the FW has booted Linux. This is because PLLH is used by the HDMI encoder to generate the pixel clock.

Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com Reviewed-by: Eric Anholt eric@anholt.net Signed-off-by: Stephen Boyd sboyd@kernel.org

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index 44301a3d9963..2108a274185a 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -449,17 +449,17 @@ struct bcm2835_pll_ana_bits { static const struct bcm2835_pll_ana_bits bcm2835_ana_default = { .mask0 = 0, .set0 = 0, - .mask1 = (u32)~(A2W_PLL_KI_MASK | A2W_PLL_KP_MASK), + .mask1 = A2W_PLL_KI_MASK | A2W_PLL_KP_MASK, .set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT), - .mask3 = (u32)~A2W_PLL_KA_MASK, + .mask3 = A2W_PLL_KA_MASK, .set3 = (2 << A2W_PLL_KA_SHIFT), .fb_prediv_mask = BIT(14), };

static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = { - .mask0 = (u32)~(A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK), + .mask0 = A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK, .set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT), - .mask1 = (u32)~(A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK), + .mask1 = A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK, .set1 = (6 << A2W_PLLH_KP_SHIFT), .mask3 = 0, .set3 = 0,