-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512
Hi Greg,
Pleae pull commits for Linux 3.18 .
I've sent a review request for all commits over a week ago and all comments were addressed.
Thanks, Sasha
=====
The following changes since commit 89dad4ea47357950b8ba09886e02ff4fd0793f9e:
Linux 3.18.99 (2018-03-11 16:12:20 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-3.18-04052018
for you to fetch changes up to 5ea952bd1f538212d63bbd34b42e2cc769074259:
signal/arm: Document conflicts with SI_USER and SIGFPE (2018-04-05 00:51:03 -0400)
- ---------------------------------------------------------------- for-greg-3.18-04052018
- ---------------------------------------------------------------- A Sun (1): [media] mceusb: sporadic RX truncation corruption fix
Alan Stern (2): USB: ene_usb6250: fix first command execution USB: ene_usb6250: fix SCSI residue overwriting
Andrea della Porta (1): staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning
Antony Antony (1): xfrm: fix state migration copy replay sequence numbers
Anup Patel (1): async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
Arnd Bergmann (1): xen: avoid type warning in xchg_xen_ulong
Bart Van Assche (1): IB/srpt: Fix abort handling
Bob Moore (1): ACPICA: Disassembler: Abort on an invalid/unknown AML opcode
Chris Wilson (1): e1000e: Undo e1000e_pm_freeze if __e1000_shutdown fails
Christian Lamparter (1): net: emac: fix reset timeout with AR8035 phy
Christophe JAILLET (2): SMB2: Fix share type handling EDAC, mv64x60: Fix an error handling path
Colin Ian King (4): netxen_nic: set rcode to the return status from the call to netxen_issue_cmd btrfs: fix incorrect error return ret being passed to mapping_set_error ath5k: fix memory leak on buf on failed eeprom read wl1251: check return from call to wl1251_acx_arp_ip_filter
Dan Carpenter (3): PowerCap: Fix an error code in powercap_register_zone() block: fix an error code in add_partition() libceph: NULL deref on crush_decode() error path
Dmitry Monakhov (1): bio-integrity: Do not allocate integrity context for bio w/o data
Eric W. Biederman (3): signal/metag: Document a conflict with SI_USER with SIGFPE signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP signal/arm: Document conflicts with SI_USER and SIGFPE
Eryu Guan (1): ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff()
Fabio Estevam (1): ARM: dts: imx6qdl-wandboard: Fix audio channel swap
Firo Yang (1): hdlcdrv: Fix divide by zero in hdlcdrv_ioctl
Geert Uytterhoeven (1): sh_eth: Use platform device for printing before register_netdev()
Grygorii Strashko (1): net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control
Gustavo A. R. Silva (1): net: freescale: fix potential null pointer dereference
Hangbin Liu (1): l2tp: fix missing print session offset info
Hans de Goede (1): HID: i2c: Call acpi_device_fix_up_power for ACPI-enumerated devices
Heiko Carstens (1): s390: move _text symbol to address higher than zero
Ihar Hrachyshka (1): neighbour: update neigh timestamps iff update is effective
Ivan Mikhaylov (1): powerpc/[booke|4xx]: Don't clobber TCR[WP] when setting TCR[DIE]
J. Bruce Fields (1): lockd: fix lockd shutdown race
Jacob Keller (1): e1000e: fix race condition around skb_tstamp_tx()
Jag Raman (1): sparc64: ldc abort during vds iso boot
Jan H. Schönherr (1): KVM: nVMX: Fix handling of lmsw instruction
Jason A. Donenfeld (1): skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow
Jason Yan (2): scsi: libsas: fix memory leak in sas_smp_get_phy_events() scsi: libsas: fix error when getting phy events
Jia-Ju Bai (2): qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and qlcnic_82xx_hw_read_wx_2M mISDN: Fix a sleep-in-atomic bug
Jiri Olsa (1): perf trace: Add mmap alias for s390
Jisheng Zhang (1): usb: chipidea: properly handle host or gadget initialization failure
Johannes Thumshirn (1): scsi: sg: don't return bogus Sg_requests
Kees Cook (3): bna: Avoid reading past end of buffer qlge: Avoid reading past end of buffer ray_cs: Avoid reading past end of buffer
Kirill Tkhai (1): pidns: disable pid allocation if pid_ns_prepare_proc() is failed in alloc_pid()
Liping Zhang (1): netfilter: ctnetlink: fix incorrect nf_ct_put during hash resize
Lorenzo Bianconi (1): iio: magnetometer: st_magn_spi: fix spi_device_id table
Luca Coelho (1): mac80211: bail out from prep_connection() if a reconfig is ongoing
Lv Zheng (1): ACPICA: Events: Add runtime stub support for event APIs
Mahesh Bandewar (1): ipv6: avoid dad-failures for addresses with NODAD
Marcel Holtmann (1): Bluetooth: Send HCI Set Event Mask Page 2 command only when needed
Marcin Nowakowski (2): MIPS: mm: fixed mappings: correct initialisation MIPS: kprobes: flush_insn_slot should flush only if probe initialised
Maurizio Lombardi (1): scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats()
Michael Ellerman (2): selftests/powerpc: Fix TM resched DSCR test with some compilers powerpc/spufs: Fix coredump of SPU contexts
Michael Schmitz (1): fix race in drivers/char/random.c:get_reg()
Miklos Szeredi (1): ovl: filter trusted xattr for non-admin
Milian Wolff (1): perf report: Ensure the perf DSO mapping matches what libdw sees
Mintz, Yuval (1): bnx2x: Allow vfs to disable txvlan offload
Namhyung Kim (1): perf tests: Decompress kernel module before objdump
Neil Horman (1): vmxnet3: ensure that adapter is in proper state during force_close
Nithin Sujir (1): bonding: Don't update slave->link until ready to commit
Pan Bian (2): usb: dwc3: keystone: check return value [media] cx25840: fix unchecked return values
Paul Mackerras (1): KVM: PPC: Book3S PR: Check copy_to/from_user return values
Peter Zijlstra (2): x86/tsc: Provide 'tsc=unstable' boot parameter perf/core: Correct event creation with PERF_FORMAT_GROUP
Pieter "PoroCYon" Sluys (1): vfb: fix video mode and line_length being set when loaded
Rabin Vincent (1): CIFS: silence lockdep splat in cifs_relock_file()
Rafael David Tinoco (1): scsi: libiscsi: Allow sd_shutdown on bad transport
Robert Jarzmik (1): tags: honor COMPILED_SOURCE with apart output directory
Roman Kapl (1): net: move somaxconn init from sysctl code
Roman Pen (1): KVM: SVM: do not zero out segment attributes if segment is unusable or not present
Roopa Prabhu (1): vxlan: dont migrate permanent fdb entries during learn
Russell King (1): net: phy: avoid genphy_aneg_done() for PHYs without clause 22 support
Stefan Wahren (1): net: qca_spi: Fix alignment issues in rx path
Steffen Klassert (1): af_key: Fix slab-out-of-bounds in pfkey_compile_policy.
Suman Anna (1): ARM: davinci: da8xx: Create DSP device only when assigned memory
Talat Batheesh (2): net/mlx4_en: Avoid adding steering rules with invalid ring net/mlx4: Fix the check in attaching steering rules
Tang Junhui (2): bcache: stop writeback thread after detaching bcache: segregate flash only volume write streams
Thomas Bogendoerfer (1): Fix serial console on SNI RM400 machines
Thomas Petazzoni (1): ata: libahci: properly propagate return value of platform_get_irq()
Tin Huynh (1): leds: pca955x: Correct I2C Functionality
Tomi Valkeinen (1): drm/omap: fix tiled buffer stride calculations
Tony Lindgren (1): tty: n_gsm: Allow ADM response in addition to UA for control dlci
Trond Myklebust (1): NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION
Vaibhav Jain (1): rtc: interface: Validate alarm-time before handling rollover
Will Deacon (1): arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage
Xin Long (1): sctp: fix recursive locking warning in sctp_do_peeloff
chenxiang (1): scsi: libsas: initialize sas_phy status according to response of DISCOVER
linzhang (2): net: x25: fix one potential use-after-free issue net: llc: add lock_sock in llc_ui_bind to avoid a race condition
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 1 + arch/arm/include/asm/xen/events.h | 2 +- arch/arm/include/uapi/asm/siginfo.h | 13 +++++ arch/arm/mach-davinci/devices-da8xx.c | 10 ++++ arch/arm/vfp/vfpmodule.c | 2 +- arch/arm64/include/asm/futex.h | 8 +-- arch/metag/include/uapi/asm/siginfo.h | 7 +++ arch/metag/kernel/traps.c | 2 +- arch/mips/include/asm/kprobes.h | 3 +- arch/mips/mm/pgtable-32.c | 6 +- arch/powerpc/include/uapi/asm/siginfo.h | 15 +++++ arch/powerpc/kernel/time.c | 14 ++++- arch/powerpc/kernel/traps.c | 10 ++-- arch/powerpc/kvm/book3s_pr_papr.c | 34 ++++++++--- arch/powerpc/platforms/cell/spufs/coredump.c | 2 + arch/s390/kernel/vmlinux.lds.S | 8 ++- arch/sparc/kernel/ldc.c | 7 ++- arch/x86/kernel/tsc.c | 2 + arch/x86/kvm/svm.c | 24 ++++---- arch/x86/kvm/vmx.c | 7 ++- block/bio-integrity.c | 3 + block/partition-generic.c | 4 +- crypto/async_tx/async_pq.c | 5 +- drivers/acpi/acpica/evxfevnt.c | 18 ++++++ drivers/acpi/acpica/psobject.c | 14 +++++ drivers/ata/libahci_platform.c | 5 +- drivers/char/random.c | 6 +- drivers/edac/mv64x60_edac.c | 2 +- drivers/gpu/drm/omapdrm/omap_gem.c | 4 +- drivers/hid/i2c-hid/i2c-hid.c | 13 +++++ drivers/iio/magnetometer/st_magn_spi.c | 2 - drivers/infiniband/ulp/srpt/ib_srpt.c | 6 +- drivers/isdn/mISDN/stack.c | 2 +- drivers/leds/leds-pca955x.c | 2 +- drivers/md/bcache/alloc.c | 19 +++++-- drivers/md/bcache/super.c | 6 ++ drivers/media/i2c/cx25840/cx25840-core.c | 36 +++++++----- drivers/media/rc/mceusb.c | 9 ++- drivers/net/bonding/bond_main.c | 11 +++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 19 +++++-- drivers/net/ethernet/brocade/bna/bfa_ioc.c | 2 +- drivers/net/ethernet/freescale/fsl_pq_mdio.c | 9 ++- drivers/net/ethernet/ibm/emac/core.c | 26 +++++++-- drivers/net/ethernet/intel/e1000e/netdev.c | 17 +++++- drivers/net/ethernet/mellanox/mlx4/mcg.c | 15 +++-- drivers/net/ethernet/mellanox/mlx4/qp.c | 13 +++++ .../net/ethernet/qlogic/netxen/netxen_nic_ctx.c | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 2 +- drivers/net/ethernet/qlogic/qlge/qlge_dbg.c | 4 +- drivers/net/ethernet/qualcomm/qca_spi.c | 10 ++-- drivers/net/ethernet/renesas/sh_eth.c | 2 +- drivers/net/ethernet/ti/cpsw.c | 16 ++++++ drivers/net/hamradio/hdlcdrv.c | 2 + drivers/net/phy/phy.c | 6 ++ drivers/net/vmxnet3/vmxnet3_drv.c | 5 ++ drivers/net/vxlan.c | 2 +- drivers/net/wireless/ath/ath5k/debug.c | 5 +- drivers/net/wireless/ray_cs.c | 7 ++- drivers/net/wireless/ti/wl1251/main.c | 3 +- drivers/powercap/powercap_sys.c | 1 + drivers/rtc/interface.c | 9 ++- drivers/scsi/bnx2fc/bnx2fc.h | 1 + drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 10 +++- drivers/scsi/libiscsi.c | 24 +++++++- drivers/scsi/libsas/sas_expander.c | 4 +- drivers/scsi/sg.c | 5 +- drivers/staging/wlan-ng/prism2mgmt.c | 2 +- drivers/tty/n_gsm.c | 17 +++++- drivers/tty/serial/sccnxp.c | 15 +++-- drivers/usb/chipidea/core.c | 29 +++++++--- drivers/usb/dwc3/dwc3-keystone.c | 4 ++ drivers/usb/storage/ene_ub6250.c | 11 ++-- drivers/video/fbdev/vfb.c | 17 ++++++ fs/btrfs/extent_io.c | 2 +- fs/cifs/file.c | 2 +- fs/cifs/smb2pdu.c | 14 +++-- fs/ext4/file.c | 2 +- fs/lockd/svc.c | 6 +- fs/nfs/nfs4proc.c | 7 ++- fs/nfs/nfs4state.c | 10 +++- fs/overlayfs/inode.c | 12 +++- include/linux/mlx4/qp.h | 1 + include/linux/skbuff.h | 8 +-- include/net/x25.h | 4 +- kernel/events/core.c | 15 +++-- kernel/pid.c | 4 +- net/bluetooth/hci_core.c | 17 +++++- net/ceph/osdmap.c | 1 + net/core/neighbour.c | 14 +++-- net/core/net_namespace.c | 19 +++++++ net/core/skbuff.c | 65 ++++++++++++++-------- net/core/sysctl_net_core.c | 2 - net/ipv6/addrconf.c | 5 +- net/key/af_key.c | 2 +- net/l2tp/l2tp_netlink.c | 2 + net/llc/af_llc.c | 3 + net/mac80211/mlme.c | 4 ++ net/netfilter/nf_conntrack_netlink.c | 7 ++- net/sctp/socket.c | 4 +- net/x25/af_x25.c | 24 +++++--- net/x25/sysctl_net_x25.c | 5 +- net/xfrm/xfrm_state.c | 2 + scripts/tags.sh | 1 + tools/perf/builtin-trace.c | 4 ++ tools/perf/tests/code-reading.c | 20 ++++++- tools/perf/util/unwind-libdw.c | 8 +++ .../testing/selftests/powerpc/tm/tm-resched-dscr.c | 2 +- 107 files changed, 737 insertions(+), 221 deletions(-) create mode 100644 arch/arm/include/uapi/asm/siginfo.h
On 5 April 2018 11:54:28 AM IST, Sasha Levin Alexander.Levin@microsoft.com wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512
Hi Greg,
Pleae pull commits for Linux 3.18 .
I've sent a review request for all commits over a week ago and all comments were addressed.
Thanks, Sasha
=====
The following changes since commit 89dad4ea47357950b8ba09886e02ff4fd0793f9e:
Linux 3.18.99 (2018-03-11 16:12:20 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-3.18-04052018
for you to fetch changes up to 5ea952bd1f538212d63bbd34b42e2cc769074259:
signal/arm: Document conflicts with SI_USER and SIGFPE (2018-04-05 00:51:03 -0400)
for-greg-3.18-04052018
Jason A. Donenfeld (1): skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow
This patch introduces build warnings[1] with GCC 7.3.1 that were fixed upstream by commit 3f29770723fe498a5c5f57c3a31a996ebdde03e1 ("ipsec: check return value of skb_to_sgvec always").
[1] https://del.dog/delexogeqi.coffeescript
On Thu, Apr 05, 2018 at 12:32:55PM +0530, Harsh Shandilya wrote:
On 5 April 2018 11:54:28 AM IST, Sasha Levin Alexander.Levin@microsoft.com wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512
Hi Greg,
Pleae pull commits for Linux 3.18 .
I've sent a review request for all commits over a week ago and all comments were addressed.
Thanks, Sasha
=====
The following changes since commit 89dad4ea47357950b8ba09886e02ff4fd0793f9e:
Linux 3.18.99 (2018-03-11 16:12:20 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-3.18-04052018
for you to fetch changes up to 5ea952bd1f538212d63bbd34b42e2cc769074259:
signal/arm: Document conflicts with SI_USER and SIGFPE (2018-04-05 00:51:03 -0400)
for-greg-3.18-04052018
Jason A. Donenfeld (1): skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow
This patch introduces build warnings[1] with GCC 7.3.1 that were fixed upstream by commit 3f29770723fe498a5c5f57c3a31a996ebdde03e1 ("ipsec: check return value of skb_to_sgvec always").
[1] https://del.dog/delexogeqi.coffeescript
Sent from my Android device with K-9 Mail. Please excuse my brevity.
I have backported this commit and verified it fixes the warnings. This affects 3.18, 4.4, and 4.9. I can send them if/when these patches are added. No other warnings appear on arm64 and x86_64.
Nathan
On Thu, Apr 05, 2018 at 12:40:48AM -0700, Nathan Chancellor wrote:
On Thu, Apr 05, 2018 at 12:32:55PM +0530, Harsh Shandilya wrote:
On 5 April 2018 11:54:28 AM IST, Sasha Levin Alexander.Levin@microsoft.com wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512
Hi Greg,
Pleae pull commits for Linux 3.18 .
I've sent a review request for all commits over a week ago and all comments were addressed.
Thanks, Sasha
=====
The following changes since commit 89dad4ea47357950b8ba09886e02ff4fd0793f9e:
Linux 3.18.99 (2018-03-11 16:12:20 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-3.18-04052018
for you to fetch changes up to 5ea952bd1f538212d63bbd34b42e2cc769074259:
signal/arm: Document conflicts with SI_USER and SIGFPE (2018-04-05 00:51:03 -0400)
for-greg-3.18-04052018
Jason A. Donenfeld (1): skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow
This patch introduces build warnings[1] with GCC 7.3.1 that were fixed upstream by commit 3f29770723fe498a5c5f57c3a31a996ebdde03e1 ("ipsec: check return value of skb_to_sgvec always").
[1] https://del.dog/delexogeqi.coffeescript
Sent from my Android device with K-9 Mail. Please excuse my brevity.
I have backported this commit and verified it fixes the warnings. This affects 3.18, 4.4, and 4.9. I can send them if/when these patches are added. No other warnings appear on arm64 and x86_64.
Greg, will you grab that commit, or should I add it to the branches?
On Mon, Apr 09, 2018 at 12:26:10AM +0000, Sasha Levin wrote:
On Thu, Apr 05, 2018 at 12:40:48AM -0700, Nathan Chancellor wrote:
On Thu, Apr 05, 2018 at 12:32:55PM +0530, Harsh Shandilya wrote:
On 5 April 2018 11:54:28 AM IST, Sasha Levin Alexander.Levin@microsoft.com wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512
Hi Greg,
Pleae pull commits for Linux 3.18 .
I've sent a review request for all commits over a week ago and all comments were addressed.
Thanks, Sasha
=====
The following changes since commit 89dad4ea47357950b8ba09886e02ff4fd0793f9e:
Linux 3.18.99 (2018-03-11 16:12:20 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-3.18-04052018
for you to fetch changes up to 5ea952bd1f538212d63bbd34b42e2cc769074259:
signal/arm: Document conflicts with SI_USER and SIGFPE (2018-04-05 00:51:03 -0400)
for-greg-3.18-04052018
Jason A. Donenfeld (1): skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow
This patch introduces build warnings[1] with GCC 7.3.1 that were fixed upstream by commit 3f29770723fe498a5c5f57c3a31a996ebdde03e1 ("ipsec: check return value of skb_to_sgvec always").
[1] https://del.dog/delexogeqi.coffeescript
Sent from my Android device with K-9 Mail. Please excuse my brevity.
I have backported this commit and verified it fixes the warnings. This affects 3.18, 4.4, and 4.9. I can send them if/when these patches are added. No other warnings appear on arm64 and x86_64.
Greg, will you grab that commit, or should I add it to the branches?
I can grab it, thanks.
greg k-h
On Thu, Apr 05, 2018 at 12:40:48AM -0700, Nathan Chancellor wrote:
On Thu, Apr 05, 2018 at 12:32:55PM +0530, Harsh Shandilya wrote:
On 5 April 2018 11:54:28 AM IST, Sasha Levin Alexander.Levin@microsoft.com wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512
Hi Greg,
Pleae pull commits for Linux 3.18 .
I've sent a review request for all commits over a week ago and all comments were addressed.
Thanks, Sasha
=====
The following changes since commit 89dad4ea47357950b8ba09886e02ff4fd0793f9e:
Linux 3.18.99 (2018-03-11 16:12:20 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-3.18-04052018
for you to fetch changes up to 5ea952bd1f538212d63bbd34b42e2cc769074259:
signal/arm: Document conflicts with SI_USER and SIGFPE (2018-04-05 00:51:03 -0400)
for-greg-3.18-04052018
Jason A. Donenfeld (1): skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow
This patch introduces build warnings[1] with GCC 7.3.1 that were fixed upstream by commit 3f29770723fe498a5c5f57c3a31a996ebdde03e1 ("ipsec: check return value of skb_to_sgvec always").
[1] https://del.dog/delexogeqi.coffeescript
Sent from my Android device with K-9 Mail. Please excuse my brevity.
I have backported this commit and verified it fixes the warnings. This affects 3.18, 4.4, and 4.9. I can send them if/when these patches are added. No other warnings appear on arm64 and x86_64.
Do you happen to have a pointer to these backports? I tried a simple one for 4.9.y and it didn't apply :(
thanks,
greg k-h
On Mon, Apr 09, 2018 at 05:12:49PM +0200, Greg KH wrote:
On Thu, Apr 05, 2018 at 12:40:48AM -0700, Nathan Chancellor wrote:
On Thu, Apr 05, 2018 at 12:32:55PM +0530, Harsh Shandilya wrote:
On 5 April 2018 11:54:28 AM IST, Sasha Levin Alexander.Levin@microsoft.com wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512
Hi Greg,
Pleae pull commits for Linux 3.18 .
I've sent a review request for all commits over a week ago and all comments were addressed.
Thanks, Sasha
=====
The following changes since commit 89dad4ea47357950b8ba09886e02ff4fd0793f9e:
Linux 3.18.99 (2018-03-11 16:12:20 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-3.18-04052018
for you to fetch changes up to 5ea952bd1f538212d63bbd34b42e2cc769074259:
signal/arm: Document conflicts with SI_USER and SIGFPE (2018-04-05 00:51:03 -0400)
for-greg-3.18-04052018
Jason A. Donenfeld (1): skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow
This patch introduces build warnings[1] with GCC 7.3.1 that were fixed upstream by commit 3f29770723fe498a5c5f57c3a31a996ebdde03e1 ("ipsec: check return value of skb_to_sgvec always").
[1] https://del.dog/delexogeqi.coffeescript
Sent from my Android device with K-9 Mail. Please excuse my brevity.
I have backported this commit and verified it fixes the warnings. This affects 3.18, 4.4, and 4.9. I can send them if/when these patches are added. No other warnings appear on arm64 and x86_64.
Do you happen to have a pointer to these backports? I tried a simple one for 4.9.y and it didn't apply :(
thanks,
greg k-h
There was some refractoring of the arguments to skb_to_sgvec and skb_to_sgvec_nomark in addition to the lines around them between 4.9 and 4.12. It's even worse between 3.18 and 4.4. I have the patch files sitting right here if you want me to send them over.
Cheers! Nathan
On Mon, Apr 09, 2018 at 09:14:46AM -0700, Nathan Chancellor wrote:
On Mon, Apr 09, 2018 at 05:12:49PM +0200, Greg KH wrote:
On Thu, Apr 05, 2018 at 12:40:48AM -0700, Nathan Chancellor wrote:
On Thu, Apr 05, 2018 at 12:32:55PM +0530, Harsh Shandilya wrote:
On 5 April 2018 11:54:28 AM IST, Sasha Levin Alexander.Levin@microsoft.com wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512
Hi Greg,
Pleae pull commits for Linux 3.18 .
I've sent a review request for all commits over a week ago and all comments were addressed.
Thanks, Sasha
=====
The following changes since commit 89dad4ea47357950b8ba09886e02ff4fd0793f9e:
Linux 3.18.99 (2018-03-11 16:12:20 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-3.18-04052018
for you to fetch changes up to 5ea952bd1f538212d63bbd34b42e2cc769074259:
signal/arm: Document conflicts with SI_USER and SIGFPE (2018-04-05 00:51:03 -0400)
for-greg-3.18-04052018
Jason A. Donenfeld (1): skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow
This patch introduces build warnings[1] with GCC 7.3.1 that were fixed upstream by commit 3f29770723fe498a5c5f57c3a31a996ebdde03e1 ("ipsec: check return value of skb_to_sgvec always").
[1] https://del.dog/delexogeqi.coffeescript
Sent from my Android device with K-9 Mail. Please excuse my brevity.
I have backported this commit and verified it fixes the warnings. This affects 3.18, 4.4, and 4.9. I can send them if/when these patches are added. No other warnings appear on arm64 and x86_64.
Do you happen to have a pointer to these backports? I tried a simple one for 4.9.y and it didn't apply :(
thanks,
greg k-h
There was some refractoring of the arguments to skb_to_sgvec and skb_to_sgvec_nomark in addition to the lines around them between 4.9 and 4.12. It's even worse between 3.18 and 4.4. I have the patch files sitting right here if you want me to send them over.
Yes please!
On 9 April 2018 8:42:49 PM IST, Greg KH gregkh@linuxfoundation.org wrote:
On Thu, Apr 05, 2018 at 12:40:48AM -0700, Nathan Chancellor wrote:
On Thu, Apr 05, 2018 at 12:32:55PM +0530, Harsh Shandilya wrote:
On 5 April 2018 11:54:28 AM IST, Sasha Levin
Alexander.Levin@microsoft.com wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512
Hi Greg,
Pleae pull commits for Linux 3.18 .
I've sent a review request for all commits over a week ago and all comments were addressed.
Thanks, Sasha
=====
The following changes since commit 89dad4ea47357950b8ba09886e02ff4fd0793f9e:
Linux 3.18.99 (2018-03-11 16:12:20 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git
tags/for-greg-3.18-04052018
for you to fetch changes up to 5ea952bd1f538212d63bbd34b42e2cc769074259:
signal/arm: Document conflicts with SI_USER and SIGFPE (2018-04-05 00:51:03 -0400)
for-greg-3.18-04052018
Jason A. Donenfeld (1): skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow
This patch introduces build warnings[1] with GCC 7.3.1 that were
fixed upstream by commit 3f29770723fe498a5c5f57c3a31a996ebdde03e1 ("ipsec: check return value of skb_to_sgvec always").
[1] https://del.dog/delexogeqi.coffeescript
Sent from my Android device with K-9 Mail. Please excuse my
brevity.
I have backported this commit and verified it fixes the warnings.
This
affects 3.18, 4.4, and 4.9. I can send them if/when these patches are added. No other warnings appear on arm64 and x86_64.
Do you happen to have a pointer to these backports? I tried a simple one for 4.9.y and it didn't apply :(
thanks,
greg k-h
I'm attaching Nathan's 3.18 backport, I'll let him send the rest over.
On Thu, Apr 05, 2018 at 06:24:28AM +0000, Sasha Levin wrote:
Hi Greg,
Pleae pull commits for Linux 3.18 .
I've sent a review request for all commits over a week ago and all comments were addressed.
Thanks, Sasha
=====
The following changes since commit 89dad4ea47357950b8ba09886e02ff4fd0793f9e:
Linux 3.18.99 (2018-03-11 16:12:20 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-3.18-04052018
All now queued up, thanks.
greg k-h
linux-stable-mirror@lists.linaro.org