This is the start of the stable review cycle for the 4.14.302 release. There are 38 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Dec 2022 13:08:57 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.302-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 4.14.302-rc1
Dan Carpenter error27@gmail.com net: mvneta: Fix an out of bounds check
Eric Dumazet edumazet@google.com ipv6: avoid use-after-free in ip6_fragment()
Yang Yingliang yangyingliang@huawei.com net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq()
Juergen Gross jgross@suse.com xen/netback: fix build warning
Zhang Changzhong zhangchangzhong@huawei.com ethernet: aeroflex: fix potential skb leak in greth_init_rings()
YueHaibing yuehaibing@huawei.com tipc: Fix potential OOB in tipc_link_proto_rcv()
Liu Jian liujian56@huawei.com net: hisilicon: Fix potential use-after-free in hix5hd2_rx()
Liu Jian liujian56@huawei.com net: hisilicon: Fix potential use-after-free in hisi_femac_rx()
Jisheng Zhang jszhang@kernel.org net: stmmac: fix "snps,axi-config" node property parsing
Kees Cook keescook@chromium.org NFC: nci: Bounds check struct nfc_target arrays
Dan Carpenter error27@gmail.com net: mvneta: Prevent out of bounds read in mvneta_config_rss()
Valentina Goncharenko goncharenko.vp@ispras.ru net: encx24j600: Fix invalid logic in reading of MISTAT register
Valentina Goncharenko goncharenko.vp@ispras.ru net: encx24j600: Add parentheses to fix precedence
Wei Yongjun weiyongjun1@huawei.com mac802154: fix missing INIT_LIST_HEAD in ieee802154_if_add()
Wang ShaoBo bobo.shaobowang@huawei.com Bluetooth: 6LoWPAN: add missing hci_dev_put() in get_l2cap_conn()
Akihiko Odaki akihiko.odaki@daynix.com igb: Allocate MSI-X vector when testing
Akihiko Odaki akihiko.odaki@daynix.com e1000e: Fix TX dispatch condition
Xiongfeng Wang wangxiongfeng2@huawei.com gpio: amd8111: Fix PCI device reference count leak
Hauke Mehrtens hauke@hauke-m.de ca8210: Fix crash by zero initializing data
Ziyang Xuan william.xuanziyang@huawei.com ieee802154: cc2520: Fix error return code in cc2520_hw_init()
ZhangPeng zhangpeng362@huawei.com HID: core: fix shift-out-of-bounds in hid_report_raw_event
Anastasia Belova abelova@astralinux.ru HID: hid-lg4ff: Add check for empty lbuf
Thomas Huth thuth@redhat.com KVM: s390: vsie: Fix the initialization of the epoch extension (epdx) field
Tejun Heo tj@kernel.org memcg: fix possible use-after-free in memcg_write_event_control()
Hans Verkuil hverkuil-cisco@xs4all.nl media: v4l2-dv-timings.c: fix too strict blanking sanity checks
Connor Shu Connor.Shu@ibm.com rcutorture: Automatically create initrd directory
Juergen Gross jgross@suse.com xen/netback: don't call kfree_skb() with interrupts disabled
Juergen Gross jgross@suse.com xen/netback: do some code cleanup
Ross Lagerwall ross.lagerwall@citrix.com xen/netback: Ensure protocol headers don't fall in the non-linear area
Davide Tronchin davide.tronchin.94@gmail.com net: usb: qmi_wwan: add u-blox 0x1342 composition
Andreas Kemnade andreas@kemnade.info regulator: twl6030: fix get status of twl6032 regulators
Srinivasa Rao Mandadapu quic_srivasam@quicinc.com ASoC: soc-pcm: Add NULL check in BE reparenting
Kees Cook keescook@chromium.org ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event
Johan Jonker jbx6244@gmail.com ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
Giulio Benetti giulio.benetti@benettiengineering.com ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation
Tomislav Novak tnovak@fb.com ARM: 9251/1: perf: Fix stacktraces for tracepoint events in THUMB2 kernels
Johan Jonker jbx6244@gmail.com ARM: dts: rockchip: fix ir-receiver node names
Sebastian Reichel sebastian.reichel@collabora.com arm: dts: rockchip: fix node name for hym8563 rtc
-------------
Diffstat:
Makefile | 4 +- arch/arm/boot/dts/rk3036-evb.dts | 2 +- arch/arm/boot/dts/rk3188-radxarock.dts | 2 +- arch/arm/boot/dts/rk3188.dtsi | 1 - arch/arm/boot/dts/rk3288-evb-act8846.dts | 2 +- arch/arm/boot/dts/rk3288-firefly.dtsi | 2 +- arch/arm/boot/dts/rk3288-miqi.dts | 2 +- arch/arm/boot/dts/rk3288-rock2-square.dts | 2 +- arch/arm/boot/dts/rk3xxx.dtsi | 7 + arch/arm/include/asm/perf_event.h | 2 +- arch/arm/include/asm/pgtable-nommu.h | 6 - arch/arm/include/asm/pgtable.h | 16 +- arch/arm/mm/nommu.c | 19 ++ arch/s390/kvm/vsie.c | 4 +- drivers/gpio/gpio-amd8111.c | 4 + drivers/hid/hid-core.c | 3 + drivers/hid/hid-lg4ff.c | 6 + drivers/media/v4l2-core/v4l2-dv-timings.c | 20 +- drivers/net/ethernet/aeroflex/greth.c | 1 + drivers/net/ethernet/hisilicon/hisi_femac.c | 2 +- drivers/net/ethernet/hisilicon/hix5hd2_gmac.c | 2 +- drivers/net/ethernet/intel/e1000e/netdev.c | 4 +- drivers/net/ethernet/intel/igb/igb_ethtool.c | 2 + drivers/net/ethernet/marvell/mvneta.c | 2 +- drivers/net/ethernet/microchip/encx24j600-regmap.c | 4 +- .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 8 +- drivers/net/ieee802154/ca8210.c | 2 +- drivers/net/ieee802154/cc2520.c | 2 +- drivers/net/plip/plip.c | 4 +- drivers/net/usb/qmi_wwan.c | 1 + drivers/net/xen-netback/common.h | 14 +- drivers/net/xen-netback/interface.c | 22 +- drivers/net/xen-netback/netback.c | 229 ++++++++++++--------- drivers/net/xen-netback/rx.c | 10 +- drivers/regulator/twl6030-regulator.c | 15 +- include/linux/cgroup.h | 1 + kernel/cgroup/cgroup-internal.h | 1 - mm/memcontrol.c | 15 +- net/bluetooth/6lowpan.c | 1 + net/ipv6/ip6_output.c | 5 + net/mac802154/iface.c | 1 + net/nfc/nci/ntf.c | 6 + net/tipc/link.c | 4 +- sound/core/seq/seq_memory.c | 11 +- sound/soc/soc-pcm.c | 2 + tools/testing/selftests/rcutorture/bin/kvm.sh | 8 + tools/testing/selftests/rcutorture/bin/mkinitrd.sh | 60 ++++++ 47 files changed, 350 insertions(+), 193 deletions(-)
From: Sebastian Reichel sebastian.reichel@collabora.com
[ Upstream commit 17b57beafccb4569accbfc8c11390744cf59c021 ]
Fix the node name for hym8563 in all arm rockchip devicetrees.
Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Link: https://lore.kernel.org/r/20221024165549.74574-4-sebastian.reichel@collabora... Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/rk3036-evb.dts | 2 +- arch/arm/boot/dts/rk3288-evb-act8846.dts | 2 +- arch/arm/boot/dts/rk3288-firefly.dtsi | 2 +- arch/arm/boot/dts/rk3288-miqi.dts | 2 +- arch/arm/boot/dts/rk3288-rock2-square.dts | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index c0953410121b..41309de6c91d 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -69,7 +69,7 @@ &i2c1 { status = "okay";
- hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index b9418d170502..e5231ecb8279 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -91,7 +91,7 @@ vin-supply = <&vcc_sys>; };
- hym8563@51 { + rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>;
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index b9e6f3a97240..5b14e9105070 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -270,7 +270,7 @@ vin-supply = <&vcc_sys>; };
- hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 4d923aa6ed11..2fd39bbf0b01 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -183,7 +183,7 @@ vin-supply = <&vcc_sys>; };
- hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 0e084b8a86ac..6011b117ab68 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -177,7 +177,7 @@ };
&i2c0 { - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>;
From: Johan Jonker jbx6244@gmail.com
[ Upstream commit dd847fe34cdf1e89afed1af24986359f13082bfb ]
Fix ir-receiver node names on Rockchip boards, so that they match with regex: '^ir(-receiver)?(@[a-f0-9]+)?$'
Signed-off-by: Johan Jonker jbx6244@gmail.com Link: https://lore.kernel.org/r/ea5af279-f44c-afea-023d-bb37f5a0d58d@gmail.com Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/rk3188-radxarock.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 541a798d3d20..3844fbd84ba7 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -104,7 +104,7 @@ #sound-dai-cells = <0>; };
- ir_recv: gpio-ir-receiver { + ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; pinctrl-names = "default";
From: Tomislav Novak tnovak@fb.com
[ Upstream commit 612695bccfdbd52004551308a55bae410e7cd22f ]
Store the frame address where arm_get_current_stackframe() looks for it (ARM_r7 instead of ARM_fp if CONFIG_THUMB2_KERNEL=y). Otherwise frame->fp gets set to 0, causing unwind_frame() to fail.
# bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }' Attaching 1 probe... @[ __schedule+1059 ]: 1
A typical first unwind instruction is 0x97 (SP = R7), so after executing it SP ends up being 0 and -URC_FAILURE is returned.
unwind_frame(pc = ac9da7d7 lr = 00000000 sp = c69bdda0 fp = 00000000) unwind_find_idx(ac9da7d7) unwind_exec_insn: insn = 00000097 unwind_exec_insn: fp = 00000000 sp = 00000000 lr = 00000000 pc = 00000000
With this patch:
# bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }' Attaching 1 probe... @[ __schedule+1059 __schedule+1059 schedule+79 schedule_hrtimeout_range_clock+163 schedule_hrtimeout_range+17 ep_poll+471 SyS_epoll_wait+111 sys_epoll_pwait+231 __ret_fast_syscall+1 ]: 1
Link: https://lore.kernel.org/r/20220920230728.2617421-1-tnovak@fb.com/
Reviewed-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Tomislav Novak tnovak@fb.com Signed-off-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/include/asm/perf_event.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 4f9dec489931..c5d27140834e 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -21,7 +21,7 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs);
#define perf_arch_fetch_caller_regs(regs, __ip) { \ (regs)->ARM_pc = (__ip); \ - (regs)->ARM_fp = (unsigned long) __builtin_frame_address(0); \ + frame_pointer((regs)) = (unsigned long) __builtin_frame_address(0); \ (regs)->ARM_sp = current_stack_pointer; \ (regs)->ARM_cpsr = SVC_MODE; \ }
From: Giulio Benetti giulio.benetti@benettiengineering.com
[ Upstream commit 340a982825f76f1cff0daa605970fe47321b5ee7 ]
Actually in no-MMU SoCs(i.e. i.MXRT) ZERO_PAGE(vaddr) expands to ``` virt_to_page(0) ``` that in order expands to: ``` pfn_to_page(virt_to_pfn(0)) ``` and then virt_to_pfn(0) to: ``` ((((unsigned long)(0) - PAGE_OFFSET) >> PAGE_SHIFT) + PHYS_PFN_OFFSET) ``` where PAGE_OFFSET and PHYS_PFN_OFFSET are the DRAM offset(0x80000000) and PAGE_SHIFT is 12. This way we obtain 16MB(0x01000000) summed to the base of DRAM(0x80000000). When ZERO_PAGE(0) is then used, for example in bio_add_page(), the page gets an address that is out of DRAM bounds. So instead of using fake virtual page 0 let's allocate a dedicated zero_page during paging_init() and assign it to a global 'struct page * empty_zero_page' the same way mmu.c does and it's the same approach used in m68k with commit dc068f462179 as discussed here[0]. Then let's move ZERO_PAGE() definition to the top of pgtable.h to be in common between mmu.c and nommu.c.
[0]: https://lore.kernel.org/linux-m68k/2a462b23-5b8e-bbf4-ec7d-778434a3b9d7@goog... ad140743174d6b3070364d3c9a5179b
Signed-off-by: Giulio Benetti giulio.benetti@benettiengineering.com Reviewed-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/include/asm/pgtable-nommu.h | 6 ------ arch/arm/include/asm/pgtable.h | 16 +++++++++------- arch/arm/mm/nommu.c | 19 +++++++++++++++++++ 3 files changed, 28 insertions(+), 13 deletions(-)
diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h index a0d726a47c8a..e7ca798513c1 100644 --- a/arch/arm/include/asm/pgtable-nommu.h +++ b/arch/arm/include/asm/pgtable-nommu.h @@ -54,12 +54,6 @@
typedef pte_t *pte_addr_t;
-/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -#define ZERO_PAGE(vaddr) (virt_to_page(0)) - /* * Mark the prot value as uncacheable and unbufferable. */ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 1c462381c225..ce89af40651d 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -13,6 +13,15 @@ #include <linux/const.h> #include <asm/proc-fns.h>
+#ifndef __ASSEMBLY__ +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern struct page *empty_zero_page; +#define ZERO_PAGE(vaddr) (empty_zero_page) +#endif + #ifndef CONFIG_MMU
#include <asm-generic/4level-fixup.h> @@ -166,13 +175,6 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, #define __S111 __PAGE_SHARED_EXEC
#ifndef __ASSEMBLY__ -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern struct page *empty_zero_page; -#define ZERO_PAGE(vaddr) (empty_zero_page) -
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 91537d90f5f5..d58dd8af2cf0 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -25,6 +25,13 @@
unsigned long vectors_base;
+/* + * empty_zero_page is a special page that is used for + * zero-initialized data and COW. + */ +struct page *empty_zero_page; +EXPORT_SYMBOL(empty_zero_page); + #ifdef CONFIG_ARM_MPU struct mpu_rgn_info mpu_rgn_info;
@@ -366,9 +373,21 @@ void __init adjust_lowmem_bounds(void) */ void __init paging_init(const struct machine_desc *mdesc) { + void *zero_page; + early_trap_init((void *)vectors_base); mpu_setup(); + + /* allocate the zero page. */ + zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE); + if (!zero_page) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", + __func__, PAGE_SIZE, PAGE_SIZE); + bootmem_init(); + + empty_zero_page = virt_to_page(zero_page); + flush_dcache_page(empty_zero_page); }
/*
From: Johan Jonker jbx6244@gmail.com
[ Upstream commit da74858a475782a3f16470907814c8cc5950ad68 ]
The clock source and the sched_clock provided by the arm_global_timer on Rockchip rk3066a/rk3188 are quite unstable because their rates depend on the CPU frequency.
Recent changes to the arm_global_timer driver makes it impossible to use.
On the other side, the arm_global_timer has a higher rating than the ROCKCHIP_TIMER, it will be selected by default by the time framework while we want to use the stable Rockchip clock source.
Keep the arm_global_timer disabled in order to have the DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
Signed-off-by: Johan Jonker jbx6244@gmail.com Link: https://lore.kernel.org/r/f275ca8d-fd0a-26e5-b978-b7f3df815e0a@gmail.com Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/rk3188.dtsi | 1 - arch/arm/boot/dts/rk3xxx.dtsi | 7 +++++++ 2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 74eb1dfa2f6c..3689a23a1bca 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -546,7 +546,6 @@
&global_timer { interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; - status = "disabled"; };
&local_timer { diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 4aa6f60d6a22..5f9950704f13 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -134,6 +134,13 @@ reg = <0x1013c200 0x20>; interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; clocks = <&cru CORE_PERI>; + status = "disabled"; + /* The clock source and the sched_clock provided by the arm_global_timer + * on Rockchip rk3066a/rk3188 are quite unstable because their rates + * depend on the CPU frequency. + * Keep the arm_global_timer disabled in order to have the + * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default. + */ };
local_timer: local-timer@1013c600 {
From: Kees Cook keescook@chromium.org
[ Upstream commit 05530ef7cf7c7d700f6753f058999b1b5099a026 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed.
seq_copy_in_user() and seq_copy_in_kernel() did not have prototypes matching snd_seq_dump_func_t. Adjust this and remove the casts. There are not resulting binary output differences.
This was found as a result of Clang's new -Wcast-function-type-strict flag, which is more sensitive than the simpler -Wcast-function-type, which only checks for type width mismatches.
Reported-by: kernel test robot lkp@intel.com Link: https://lore.kernel.org/lkml/202211041527.HD8TLSE1-lkp@intel.com Cc: Jaroslav Kysela perex@perex.cz Cc: Takashi Iwai tiwai@suse.com Cc: "Gustavo A. R. Silva" gustavoars@kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Kees Cook keescook@chromium.org Link: https://lore.kernel.org/r/20221118232346.never.380-kees@kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/core/seq/seq_memory.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/sound/core/seq/seq_memory.c b/sound/core/seq/seq_memory.c index ab1112e90f88..6f413c711535 100644 --- a/sound/core/seq/seq_memory.c +++ b/sound/core/seq/seq_memory.c @@ -126,15 +126,19 @@ EXPORT_SYMBOL(snd_seq_dump_var_event); * expand the variable length event to linear buffer space. */
-static int seq_copy_in_kernel(char **bufptr, const void *src, int size) +static int seq_copy_in_kernel(void *ptr, void *src, int size) { + char **bufptr = ptr; + memcpy(*bufptr, src, size); *bufptr += size; return 0; }
-static int seq_copy_in_user(char __user **bufptr, const void *src, int size) +static int seq_copy_in_user(void *ptr, void *src, int size) { + char __user **bufptr = ptr; + if (copy_to_user(*bufptr, src, size)) return -EFAULT; *bufptr += size; @@ -163,8 +167,7 @@ int snd_seq_expand_var_event(const struct snd_seq_event *event, int count, char return newlen; } err = snd_seq_dump_var_event(event, - in_kernel ? (snd_seq_dump_func_t)seq_copy_in_kernel : - (snd_seq_dump_func_t)seq_copy_in_user, + in_kernel ? seq_copy_in_kernel : seq_copy_in_user, &buf); return err < 0 ? err : newlen; }
From: Srinivasa Rao Mandadapu quic_srivasam@quicinc.com
[ Upstream commit db8f91d424fe0ea6db337aca8bc05908bbce1498 ]
Add NULL check in dpcm_be_reparent API, to handle kernel NULL pointer dereference error. The issue occurred in fuzzing test.
Signed-off-by: Srinivasa Rao Mandadapu quic_srivasam@quicinc.com Link: https://lore.kernel.org/r/1669098673-29703-1-git-send-email-quic_srivasam@qu... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/soc-pcm.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index e995e96ab903..3a9c875534c1 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1168,6 +1168,8 @@ static void dpcm_be_reparent(struct snd_soc_pcm_runtime *fe, return;
be_substream = snd_soc_dpcm_get_substream(be, stream); + if (!be_substream) + return;
list_for_each_entry(dpcm, &be->dpcm[stream].fe_clients, list_fe) { if (dpcm->fe == fe)
From: Andreas Kemnade andreas@kemnade.info
[ Upstream commit 31a6297b89aabc81b274c093a308a7f5b55081a7 ]
Status is reported as always off in the 6032 case. Status reporting now matches the logic in the setters. Once of the differences to the 6030 is that there are no groups, therefore the state needs to be read out in the lower bits.
Signed-off-by: Andreas Kemnade andreas@kemnade.info Link: https://lore.kernel.org/r/20221120221208.3093727-3-andreas@kemnade.info Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/regulator/twl6030-regulator.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/regulator/twl6030-regulator.c b/drivers/regulator/twl6030-regulator.c index 219cbd910dbf..485d25f683d8 100644 --- a/drivers/regulator/twl6030-regulator.c +++ b/drivers/regulator/twl6030-regulator.c @@ -71,6 +71,7 @@ struct twlreg_info { #define TWL6030_CFG_STATE_SLEEP 0x03 #define TWL6030_CFG_STATE_GRP_SHIFT 5 #define TWL6030_CFG_STATE_APP_SHIFT 2 +#define TWL6030_CFG_STATE_MASK 0x03 #define TWL6030_CFG_STATE_APP_MASK (0x03 << TWL6030_CFG_STATE_APP_SHIFT) #define TWL6030_CFG_STATE_APP(v) (((v) & TWL6030_CFG_STATE_APP_MASK) >>\ TWL6030_CFG_STATE_APP_SHIFT) @@ -131,13 +132,14 @@ static int twl6030reg_is_enabled(struct regulator_dev *rdev) if (grp < 0) return grp; grp &= P1_GRP_6030; + val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE); + val = TWL6030_CFG_STATE_APP(val); } else { + val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE); + val &= TWL6030_CFG_STATE_MASK; grp = 1; }
- val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE); - val = TWL6030_CFG_STATE_APP(val); - return grp && (val == TWL6030_CFG_STATE_ON); }
@@ -190,7 +192,12 @@ static int twl6030reg_get_status(struct regulator_dev *rdev)
val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE);
- switch (TWL6030_CFG_STATE_APP(val)) { + if (info->features & TWL6032_SUBCLASS) + val &= TWL6030_CFG_STATE_MASK; + else + val = TWL6030_CFG_STATE_APP(val); + + switch (val) { case TWL6030_CFG_STATE_ON: return REGULATOR_STATUS_NORMAL;
From: Davide Tronchin davide.tronchin.94@gmail.com
[ Upstream commit a487069e11b6527373f7c6f435d8998051d0b5d9 ]
Add RmNet support for LARA-L6.
LARA-L6 module can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial interface and 1 CDC-ECM virtual network interface
In RmNet mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: RMNET interface
Signed-off-by: Davide Tronchin davide.tronchin.94@gmail.com Acked-by: Bjørn Mork bjorn@mork.no Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 74040db959d8..a2c3f5ee1780 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1366,6 +1366,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x0489, 0xe0b4, 0)}, /* Foxconn T77W968 LTE */ {QMI_FIXED_INTF(0x0489, 0xe0b5, 0)}, /* Foxconn T77W968 LTE with eSIM support*/ {QMI_FIXED_INTF(0x2692, 0x9025, 4)}, /* Cellient MPL200 (rebranded Qualcomm 05c6:9025) */ + {QMI_QUIRK_SET_DTR(0x1546, 0x1342, 4)}, /* u-blox LARA-L6 */
/* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
From: Ross Lagerwall ross.lagerwall@citrix.com
[ Upstream commit ad7f402ae4f466647c3a669b8a6f3e5d4271c84a ]
In some cases, the frontend may send a packet where the protocol headers are spread across multiple slots. This would result in netback creating an skb where the protocol headers spill over into the non-linear area. Some drivers and NICs don't handle this properly resulting in an interface reset or worse.
This issue was introduced by the removal of an unconditional skb pull in the tx path to improve performance. Fix this without reintroducing the pull by setting up grant copy ops for as many slots as needed to reach the XEN_NETBACK_TX_COPY_LEN size. Adjust the rest of the code to handle multiple copy operations per skb.
This is XSA-423 / CVE-2022-3643.
Fixes: 7e5d7753956b ("xen-netback: remove unconditional __pskb_pull_tail() in guest Tx path") Signed-off-by: Ross Lagerwall ross.lagerwall@citrix.com Reviewed-by: Paul Durrant paul@xen.org Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/xen-netback/netback.c | 223 ++++++++++++++++-------------- 1 file changed, 123 insertions(+), 100 deletions(-)
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index e1d6dbb4b770..6ad36f1dcb44 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -323,10 +323,13 @@ static int xenvif_count_requests(struct xenvif_queue *queue,
struct xenvif_tx_cb { - u16 pending_idx; + u16 copy_pending_idx[XEN_NETBK_LEGACY_SLOTS_MAX + 1]; + u8 copy_count; };
#define XENVIF_TX_CB(skb) ((struct xenvif_tx_cb *)(skb)->cb) +#define copy_pending_idx(skb, i) (XENVIF_TX_CB(skb)->copy_pending_idx[i]) +#define copy_count(skb) (XENVIF_TX_CB(skb)->copy_count)
static inline void xenvif_tx_create_map_op(struct xenvif_queue *queue, u16 pending_idx, @@ -361,31 +364,93 @@ static inline struct sk_buff *xenvif_alloc_skb(unsigned int size) return skb; }
-static struct gnttab_map_grant_ref *xenvif_get_requests(struct xenvif_queue *queue, - struct sk_buff *skb, - struct xen_netif_tx_request *txp, - struct gnttab_map_grant_ref *gop, - unsigned int frag_overflow, - struct sk_buff *nskb) +static void xenvif_get_requests(struct xenvif_queue *queue, + struct sk_buff *skb, + struct xen_netif_tx_request *first, + struct xen_netif_tx_request *txfrags, + unsigned *copy_ops, + unsigned *map_ops, + unsigned int frag_overflow, + struct sk_buff *nskb, + unsigned int extra_count, + unsigned int data_len) { struct skb_shared_info *shinfo = skb_shinfo(skb); skb_frag_t *frags = shinfo->frags; - u16 pending_idx = XENVIF_TX_CB(skb)->pending_idx; - int start; + u16 pending_idx; pending_ring_idx_t index; unsigned int nr_slots; + struct gnttab_copy *cop = queue->tx_copy_ops + *copy_ops; + struct gnttab_map_grant_ref *gop = queue->tx_map_ops + *map_ops; + struct xen_netif_tx_request *txp = first; + + nr_slots = shinfo->nr_frags + 1; + + copy_count(skb) = 0; + + /* Create copy ops for exactly data_len bytes into the skb head. */ + __skb_put(skb, data_len); + while (data_len > 0) { + int amount = data_len > txp->size ? txp->size : data_len; + + cop->source.u.ref = txp->gref; + cop->source.domid = queue->vif->domid; + cop->source.offset = txp->offset; + + cop->dest.domid = DOMID_SELF; + cop->dest.offset = (offset_in_page(skb->data + + skb_headlen(skb) - + data_len)) & ~XEN_PAGE_MASK; + cop->dest.u.gmfn = virt_to_gfn(skb->data + skb_headlen(skb) + - data_len); + + cop->len = amount; + cop->flags = GNTCOPY_source_gref;
- nr_slots = shinfo->nr_frags; + index = pending_index(queue->pending_cons); + pending_idx = queue->pending_ring[index]; + callback_param(queue, pending_idx).ctx = NULL; + copy_pending_idx(skb, copy_count(skb)) = pending_idx; + copy_count(skb)++; + + cop++; + data_len -= amount;
- /* Skip first skb fragment if it is on same page as header fragment. */ - start = (frag_get_pending_idx(&shinfo->frags[0]) == pending_idx); + if (amount == txp->size) { + /* The copy op covered the full tx_request */ + + memcpy(&queue->pending_tx_info[pending_idx].req, + txp, sizeof(*txp)); + queue->pending_tx_info[pending_idx].extra_count = + (txp == first) ? extra_count : 0; + + if (txp == first) + txp = txfrags; + else + txp++; + queue->pending_cons++; + nr_slots--; + } else { + /* The copy op partially covered the tx_request. + * The remainder will be mapped. + */ + txp->offset += amount; + txp->size -= amount; + } + }
- for (shinfo->nr_frags = start; shinfo->nr_frags < nr_slots; - shinfo->nr_frags++, txp++, gop++) { + for (shinfo->nr_frags = 0; shinfo->nr_frags < nr_slots; + shinfo->nr_frags++, gop++) { index = pending_index(queue->pending_cons++); pending_idx = queue->pending_ring[index]; - xenvif_tx_create_map_op(queue, pending_idx, txp, 0, gop); + xenvif_tx_create_map_op(queue, pending_idx, txp, + txp == first ? extra_count : 0, gop); frag_set_pending_idx(&frags[shinfo->nr_frags], pending_idx); + + if (txp == first) + txp = txfrags; + else + txp++; }
if (frag_overflow) { @@ -406,7 +471,8 @@ static struct gnttab_map_grant_ref *xenvif_get_requests(struct xenvif_queue *que skb_shinfo(skb)->frag_list = nskb; }
- return gop; + (*copy_ops) = cop - queue->tx_copy_ops; + (*map_ops) = gop - queue->tx_map_ops; }
static inline void xenvif_grant_handle_set(struct xenvif_queue *queue, @@ -442,7 +508,7 @@ static int xenvif_tx_check_gop(struct xenvif_queue *queue, struct gnttab_copy **gopp_copy) { struct gnttab_map_grant_ref *gop_map = *gopp_map; - u16 pending_idx = XENVIF_TX_CB(skb)->pending_idx; + u16 pending_idx; /* This always points to the shinfo of the skb being checked, which * could be either the first or the one on the frag_list */ @@ -453,24 +519,37 @@ static int xenvif_tx_check_gop(struct xenvif_queue *queue, struct skb_shared_info *first_shinfo = NULL; int nr_frags = shinfo->nr_frags; const bool sharedslot = nr_frags && - frag_get_pending_idx(&shinfo->frags[0]) == pending_idx; + frag_get_pending_idx(&shinfo->frags[0]) == + copy_pending_idx(skb, copy_count(skb) - 1); int i, err;
- /* Check status of header. */ - err = (*gopp_copy)->status; - if (unlikely(err)) { - if (net_ratelimit()) - netdev_dbg(queue->vif->dev, - "Grant copy of header failed! status: %d pending_idx: %u ref: %u\n", - (*gopp_copy)->status, - pending_idx, - (*gopp_copy)->source.u.ref); - /* The first frag might still have this slot mapped */ - if (!sharedslot) - xenvif_idx_release(queue, pending_idx, - XEN_NETIF_RSP_ERROR); + for (i = 0; i < copy_count(skb); i++) { + int newerr; + + /* Check status of header. */ + pending_idx = copy_pending_idx(skb, i); + + newerr = (*gopp_copy)->status; + if (likely(!newerr)) { + /* The first frag might still have this slot mapped */ + if (i < copy_count(skb) - 1 || !sharedslot) + xenvif_idx_release(queue, pending_idx, + XEN_NETIF_RSP_OKAY); + } else { + err = newerr; + if (net_ratelimit()) + netdev_dbg(queue->vif->dev, + "Grant copy of header failed! status: %d pending_idx: %u ref: %u\n", + (*gopp_copy)->status, + pending_idx, + (*gopp_copy)->source.u.ref); + /* The first frag might still have this slot mapped */ + if (i < copy_count(skb) - 1 || !sharedslot) + xenvif_idx_release(queue, pending_idx, + XEN_NETIF_RSP_ERROR); + } + (*gopp_copy)++; } - (*gopp_copy)++;
check_frags: for (i = 0; i < nr_frags; i++, gop_map++) { @@ -517,14 +596,6 @@ static int xenvif_tx_check_gop(struct xenvif_queue *queue, if (err) continue;
- /* First error: if the header haven't shared a slot with the - * first frag, release it as well. - */ - if (!sharedslot) - xenvif_idx_release(queue, - XENVIF_TX_CB(skb)->pending_idx, - XEN_NETIF_RSP_OKAY); - /* Invalidate preceding fragments of this skb. */ for (j = 0; j < i; j++) { pending_idx = frag_get_pending_idx(&shinfo->frags[j]); @@ -796,7 +867,6 @@ static void xenvif_tx_build_gops(struct xenvif_queue *queue, unsigned *copy_ops, unsigned *map_ops) { - struct gnttab_map_grant_ref *gop = queue->tx_map_ops; struct sk_buff *skb, *nskb; int ret; unsigned int frag_overflow; @@ -878,8 +948,12 @@ static void xenvif_tx_build_gops(struct xenvif_queue *queue, continue; }
+ data_len = (txreq.size > XEN_NETBACK_TX_COPY_LEN) ? + XEN_NETBACK_TX_COPY_LEN : txreq.size; + ret = xenvif_count_requests(queue, &txreq, extra_count, txfrags, work_to_do); + if (unlikely(ret < 0)) break;
@@ -905,9 +979,8 @@ static void xenvif_tx_build_gops(struct xenvif_queue *queue, index = pending_index(queue->pending_cons); pending_idx = queue->pending_ring[index];
- data_len = (txreq.size > XEN_NETBACK_TX_COPY_LEN && - ret < XEN_NETBK_LEGACY_SLOTS_MAX) ? - XEN_NETBACK_TX_COPY_LEN : txreq.size; + if (ret >= XEN_NETBK_LEGACY_SLOTS_MAX - 1 && data_len < txreq.size) + data_len = txreq.size;
skb = xenvif_alloc_skb(data_len); if (unlikely(skb == NULL)) { @@ -918,8 +991,6 @@ static void xenvif_tx_build_gops(struct xenvif_queue *queue, }
skb_shinfo(skb)->nr_frags = ret; - if (data_len < txreq.size) - skb_shinfo(skb)->nr_frags++; /* At this point shinfo->nr_frags is in fact the number of * slots, which can be as large as XEN_NETBK_LEGACY_SLOTS_MAX. */ @@ -981,54 +1052,19 @@ static void xenvif_tx_build_gops(struct xenvif_queue *queue, type); }
- XENVIF_TX_CB(skb)->pending_idx = pending_idx; - - __skb_put(skb, data_len); - queue->tx_copy_ops[*copy_ops].source.u.ref = txreq.gref; - queue->tx_copy_ops[*copy_ops].source.domid = queue->vif->domid; - queue->tx_copy_ops[*copy_ops].source.offset = txreq.offset; - - queue->tx_copy_ops[*copy_ops].dest.u.gmfn = - virt_to_gfn(skb->data); - queue->tx_copy_ops[*copy_ops].dest.domid = DOMID_SELF; - queue->tx_copy_ops[*copy_ops].dest.offset = - offset_in_page(skb->data) & ~XEN_PAGE_MASK; - - queue->tx_copy_ops[*copy_ops].len = data_len; - queue->tx_copy_ops[*copy_ops].flags = GNTCOPY_source_gref; - - (*copy_ops)++; - - if (data_len < txreq.size) { - frag_set_pending_idx(&skb_shinfo(skb)->frags[0], - pending_idx); - xenvif_tx_create_map_op(queue, pending_idx, &txreq, - extra_count, gop); - gop++; - } else { - frag_set_pending_idx(&skb_shinfo(skb)->frags[0], - INVALID_PENDING_IDX); - memcpy(&queue->pending_tx_info[pending_idx].req, - &txreq, sizeof(txreq)); - queue->pending_tx_info[pending_idx].extra_count = - extra_count; - } - - queue->pending_cons++; - - gop = xenvif_get_requests(queue, skb, txfrags, gop, - frag_overflow, nskb); + xenvif_get_requests(queue, skb, &txreq, txfrags, copy_ops, + map_ops, frag_overflow, nskb, extra_count, + data_len);
__skb_queue_tail(&queue->tx_queue, skb);
queue->tx.req_cons = idx;
- if (((gop-queue->tx_map_ops) >= ARRAY_SIZE(queue->tx_map_ops)) || + if ((*map_ops >= ARRAY_SIZE(queue->tx_map_ops)) || (*copy_ops >= ARRAY_SIZE(queue->tx_copy_ops))) break; }
- (*map_ops) = gop - queue->tx_map_ops; return; }
@@ -1107,9 +1143,8 @@ static int xenvif_tx_submit(struct xenvif_queue *queue) while ((skb = __skb_dequeue(&queue->tx_queue)) != NULL) { struct xen_netif_tx_request *txp; u16 pending_idx; - unsigned data_len;
- pending_idx = XENVIF_TX_CB(skb)->pending_idx; + pending_idx = copy_pending_idx(skb, 0); txp = &queue->pending_tx_info[pending_idx].req;
/* Check the remap error code. */ @@ -1128,18 +1163,6 @@ static int xenvif_tx_submit(struct xenvif_queue *queue) continue; }
- data_len = skb->len; - callback_param(queue, pending_idx).ctx = NULL; - if (data_len < txp->size) { - /* Append the packet payload as a fragment. */ - txp->offset += data_len; - txp->size -= data_len; - } else { - /* Schedule a response immediately. */ - xenvif_idx_release(queue, pending_idx, - XEN_NETIF_RSP_OKAY); - } - if (txp->flags & XEN_NETTXF_csum_blank) skb->ip_summed = CHECKSUM_PARTIAL; else if (txp->flags & XEN_NETTXF_data_validated) @@ -1316,7 +1339,7 @@ static inline void xenvif_tx_dealloc_action(struct xenvif_queue *queue) /* Called after netfront has transmitted */ int xenvif_tx_action(struct xenvif_queue *queue, int budget) { - unsigned nr_mops, nr_cops = 0; + unsigned nr_mops = 0, nr_cops = 0; int work_done, ret;
if (unlikely(!tx_work_todo(queue)))
From: Juergen Gross jgross@suse.com
[ Upstream commit 5834e72eda0b7e5767eb107259d98eef19ebd11f ]
Remove some unused macros and functions, make local functions static.
Signed-off-by: Juergen Gross jgross@suse.com Acked-by: Wei Liu wei.liu@kernel.org Link: https://lore.kernel.org/r/20220608043726.9380-1-jgross@suse.com Signed-off-by: Jakub Kicinski kuba@kernel.org Stable-dep-of: 74e7e1efdad4 ("xen/netback: don't call kfree_skb() with interrupts disabled") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/xen-netback/common.h | 12 ------------ drivers/net/xen-netback/interface.c | 16 +--------------- drivers/net/xen-netback/netback.c | 4 +++- drivers/net/xen-netback/rx.c | 2 +- 4 files changed, 5 insertions(+), 29 deletions(-)
diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h index bfa3c6aaebe6..4ef648f79993 100644 --- a/drivers/net/xen-netback/common.h +++ b/drivers/net/xen-netback/common.h @@ -48,7 +48,6 @@ #include <linux/debugfs.h>
typedef unsigned int pending_ring_idx_t; -#define INVALID_PENDING_RING_IDX (~0U)
struct pending_tx_info { struct xen_netif_tx_request req; /* tx request */ @@ -82,8 +81,6 @@ struct xenvif_rx_meta { /* Discriminate from any valid pending_idx value. */ #define INVALID_PENDING_IDX 0xFFFF
-#define MAX_BUFFER_OFFSET XEN_PAGE_SIZE - #define MAX_PENDING_REQS XEN_NETIF_TX_RING_SIZE
/* The maximum number of frags is derived from the size of a grant (same @@ -345,11 +342,6 @@ void xenvif_free(struct xenvif *vif); int xenvif_xenbus_init(void); void xenvif_xenbus_fini(void);
-int xenvif_schedulable(struct xenvif *vif); - -int xenvif_queue_stopped(struct xenvif_queue *queue); -void xenvif_wake_queue(struct xenvif_queue *queue); - /* (Un)Map communication rings. */ void xenvif_unmap_frontend_data_rings(struct xenvif_queue *queue); int xenvif_map_frontend_data_rings(struct xenvif_queue *queue, @@ -372,7 +364,6 @@ int xenvif_dealloc_kthread(void *data); irqreturn_t xenvif_ctrl_irq_fn(int irq, void *data);
bool xenvif_have_rx_work(struct xenvif_queue *queue, bool test_kthread); -void xenvif_rx_action(struct xenvif_queue *queue); void xenvif_rx_queue_tail(struct xenvif_queue *queue, struct sk_buff *skb);
void xenvif_carrier_on(struct xenvif *vif); @@ -380,9 +371,6 @@ void xenvif_carrier_on(struct xenvif *vif); /* Callback from stack when TX packet can be released */ void xenvif_zerocopy_callback(struct ubuf_info *ubuf, bool zerocopy_success);
-/* Unmap a pending page and release it back to the guest */ -void xenvif_idx_unmap(struct xenvif_queue *queue, u16 pending_idx); - static inline pending_ring_idx_t nr_pending_reqs(struct xenvif_queue *queue) { return MAX_PENDING_REQS - diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index 8ec25a5f1ee9..c3f64ca0bb63 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -70,7 +70,7 @@ void xenvif_skb_zerocopy_complete(struct xenvif_queue *queue) wake_up(&queue->dealloc_wq); }
-int xenvif_schedulable(struct xenvif *vif) +static int xenvif_schedulable(struct xenvif *vif) { return netif_running(vif->dev) && test_bit(VIF_STATUS_CONNECTED, &vif->status) && @@ -178,20 +178,6 @@ irqreturn_t xenvif_interrupt(int irq, void *dev_id) return IRQ_HANDLED; }
-int xenvif_queue_stopped(struct xenvif_queue *queue) -{ - struct net_device *dev = queue->vif->dev; - unsigned int id = queue->id; - return netif_tx_queue_stopped(netdev_get_tx_queue(dev, id)); -} - -void xenvif_wake_queue(struct xenvif_queue *queue) -{ - struct net_device *dev = queue->vif->dev; - unsigned int id = queue->id; - netif_tx_wake_queue(netdev_get_tx_queue(dev, id)); -} - static u16 xenvif_select_queue(struct net_device *dev, struct sk_buff *skb, void *accel_priv, select_queue_fallback_t fallback) diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 6ad36f1dcb44..665c96f4d7e4 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -105,6 +105,8 @@ static void make_tx_response(struct xenvif_queue *queue, s8 st); static void push_tx_responses(struct xenvif_queue *queue);
+static void xenvif_idx_unmap(struct xenvif_queue *queue, u16 pending_idx); + static inline int tx_work_todo(struct xenvif_queue *queue);
static inline unsigned long idx_to_pfn(struct xenvif_queue *queue, @@ -1426,7 +1428,7 @@ static void push_tx_responses(struct xenvif_queue *queue) notify_remote_via_irq(queue->tx_irq); }
-void xenvif_idx_unmap(struct xenvif_queue *queue, u16 pending_idx) +static void xenvif_idx_unmap(struct xenvif_queue *queue, u16 pending_idx) { int ret; struct gnttab_unmap_grant_ref tx_unmap_op; diff --git a/drivers/net/xen-netback/rx.c b/drivers/net/xen-netback/rx.c index 2612810eadaf..6964f8b1a36b 100644 --- a/drivers/net/xen-netback/rx.c +++ b/drivers/net/xen-netback/rx.c @@ -473,7 +473,7 @@ void xenvif_rx_skb(struct xenvif_queue *queue)
#define RX_BATCH_SIZE 64
-void xenvif_rx_action(struct xenvif_queue *queue) +static void xenvif_rx_action(struct xenvif_queue *queue) { struct sk_buff_head completed_skbs; unsigned int work_done = 0;
From: Juergen Gross jgross@suse.com
[ Upstream commit 74e7e1efdad45580cc3839f2a155174cf158f9b5 ]
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So remove kfree_skb() from the spin_lock_irqsave() section and use the already existing "drop" label in xenvif_start_xmit() for dropping the SKB. At the same time replace the dev_kfree_skb() call there with a call of dev_kfree_skb_any(), as xenvif_start_xmit() can be called with disabled interrupts.
This is XSA-424 / CVE-2022-42328 / CVE-2022-42329.
Fixes: be81992f9086 ("xen/netback: don't queue unlimited number of packages") Reported-by: Yang Yingliang yangyingliang@huawei.com Signed-off-by: Juergen Gross jgross@suse.com Reviewed-by: Jan Beulich jbeulich@suse.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/xen-netback/common.h | 2 +- drivers/net/xen-netback/interface.c | 6 ++++-- drivers/net/xen-netback/rx.c | 8 +++++--- 3 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h index 4ef648f79993..e5f254500c1c 100644 --- a/drivers/net/xen-netback/common.h +++ b/drivers/net/xen-netback/common.h @@ -364,7 +364,7 @@ int xenvif_dealloc_kthread(void *data); irqreturn_t xenvif_ctrl_irq_fn(int irq, void *data);
bool xenvif_have_rx_work(struct xenvif_queue *queue, bool test_kthread); -void xenvif_rx_queue_tail(struct xenvif_queue *queue, struct sk_buff *skb); +bool xenvif_rx_queue_tail(struct xenvif_queue *queue, struct sk_buff *skb);
void xenvif_carrier_on(struct xenvif *vif);
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index c3f64ca0bb63..c8e551932666 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -254,14 +254,16 @@ xenvif_start_xmit(struct sk_buff *skb, struct net_device *dev) if (vif->hash.alg == XEN_NETIF_CTRL_HASH_ALGORITHM_NONE) skb_clear_hash(skb);
- xenvif_rx_queue_tail(queue, skb); + if (!xenvif_rx_queue_tail(queue, skb)) + goto drop; + xenvif_kick_thread(queue);
return NETDEV_TX_OK;
drop: vif->dev->stats.tx_dropped++; - dev_kfree_skb(skb); + dev_kfree_skb_any(skb); return NETDEV_TX_OK; }
diff --git a/drivers/net/xen-netback/rx.c b/drivers/net/xen-netback/rx.c index 6964f8b1a36b..5067fa0c751f 100644 --- a/drivers/net/xen-netback/rx.c +++ b/drivers/net/xen-netback/rx.c @@ -82,9 +82,10 @@ static bool xenvif_rx_ring_slots_available(struct xenvif_queue *queue) return false; }
-void xenvif_rx_queue_tail(struct xenvif_queue *queue, struct sk_buff *skb) +bool xenvif_rx_queue_tail(struct xenvif_queue *queue, struct sk_buff *skb) { unsigned long flags; + bool ret = true;
spin_lock_irqsave(&queue->rx_queue.lock, flags);
@@ -92,8 +93,7 @@ void xenvif_rx_queue_tail(struct xenvif_queue *queue, struct sk_buff *skb) struct net_device *dev = queue->vif->dev;
netif_tx_stop_queue(netdev_get_tx_queue(dev, queue->id)); - kfree_skb(skb); - queue->vif->dev->stats.rx_dropped++; + ret = false; } else { if (skb_queue_empty(&queue->rx_queue)) xenvif_update_needed_slots(queue, skb); @@ -104,6 +104,8 @@ void xenvif_rx_queue_tail(struct xenvif_queue *queue, struct sk_buff *skb) }
spin_unlock_irqrestore(&queue->rx_queue.lock, flags); + + return ret; }
static struct sk_buff *xenvif_rx_dequeue(struct xenvif_queue *queue)
From: Connor Shu Connor.Shu@ibm.com
[ Upstream commit 8f15c682ac5a778feb8e343f9057b89beb40d85b ]
The rcutorture scripts currently expect the user to create the tools/testing/selftests/rcutorture/initrd directory. Should the user fail to do this, the kernel build will fail with obscure and confusing error messages. This commit therefore adds explicit checks for the tools/testing/selftests/rcutorture/initrd directory, and if not present, creates one on systems on which dracut is installed. If this directory could not be created, a less obscure error message is emitted and the test is aborted.
Suggested-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Connor Shu Connor.Shu@ibm.com [ paulmck: Adapt the script to fit into the rcutorture framework and severely abbreviate the initrd/init script. ] Signed-off-by: Paul E. McKenney paulmck@linux.vnet.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/rcutorture/bin/kvm.sh | 8 +++ .../selftests/rcutorture/bin/mkinitrd.sh | 60 +++++++++++++++++++ 2 files changed, 68 insertions(+) create mode 100755 tools/testing/selftests/rcutorture/bin/mkinitrd.sh
diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh index b55895fb10ed..2299347b8e37 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm.sh @@ -182,6 +182,14 @@ do shift done
+if test -z "$TORTURE_INITRD" || tools/testing/selftests/rcutorture/bin/mkinitrd.sh +then + : +else + echo No initrd and unable to create one, aborting test >&2 + exit 1 +fi + CONFIGFRAG=${KVM}/configs/${TORTURE_SUITE}; export CONFIGFRAG
if test -z "$configs" diff --git a/tools/testing/selftests/rcutorture/bin/mkinitrd.sh b/tools/testing/selftests/rcutorture/bin/mkinitrd.sh new file mode 100755 index 000000000000..ae773760f396 --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/mkinitrd.sh @@ -0,0 +1,60 @@ +#!/bin/bash +# +# Create an initrd directory if one does not already exist. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2013 +# +# Author: Connor Shu Connor.Shu@ibm.com + +D=tools/testing/selftests/rcutorture + +# Prerequisite checks +[ -z "$D" ] && echo >&2 "No argument supplied" && exit 1 +if [ ! -d "$D" ]; then + echo >&2 "$D does not exist: Malformed kernel source tree?" + exit 1 +fi +if [ -d "$D/initrd" ]; then + echo "$D/initrd already exists, no need to create it" + exit 0 +fi + +T=${TMPDIR-/tmp}/mkinitrd.sh.$$ +trap 'rm -rf $T' 0 2 +mkdir $T + +cat > $T/init << '__EOF___' +#!/bin/sh +while : +do + sleep 1000000 +done +__EOF___ + +# Try using dracut to create initrd +command -v dracut >/dev/null 2>&1 || { echo >&2 "Dracut not installed"; exit 1; } +echo Creating $D/initrd using dracut. + +# Filesystem creation +dracut --force --no-hostonly --no-hostonly-cmdline --module "base" $T/initramfs.img +cd $D +mkdir initrd +cd initrd +zcat $T/initramfs.img | cpio -id +cp $T/init init +echo Done creating $D/initrd using dracut +exit 0
From: Hans Verkuil hverkuil-cisco@xs4all.nl
commit 5eef2141776da02772c44ec406d6871a790761ee upstream.
Sanity checks were added to verify the v4l2_bt_timings blanking fields in order to avoid integer overflows when userspace passes weird values.
But that assumed that userspace would correctly fill in the front porch, backporch and sync values, but sometimes all you know is the total blanking, which is then assigned to just one of these fields.
And that can fail with these checks.
So instead set a maximum for the total horizontal and vertical blanking and check that each field remains below that.
That is still sufficient to avoid integer overflows, but it also allows for more flexibility in how userspace fills in these fields.
Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Fixes: 4b6d66a45ed3 ("media: v4l2-dv-timings: add sanity checks for blanking values") Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-dv-timings.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
--- a/drivers/media/v4l2-core/v4l2-dv-timings.c +++ b/drivers/media/v4l2-core/v4l2-dv-timings.c @@ -156,6 +156,8 @@ bool v4l2_valid_dv_timings(const struct const struct v4l2_bt_timings *bt = &t->bt; const struct v4l2_bt_timings_cap *cap = &dvcap->bt; u32 caps = cap->capabilities; + const u32 max_vert = 10240; + u32 max_hor = 3 * bt->width;
if (t->type != V4L2_DV_BT_656_1120) return false; @@ -177,14 +179,20 @@ bool v4l2_valid_dv_timings(const struct if (!bt->interlaced && (bt->il_vbackporch || bt->il_vsync || bt->il_vfrontporch)) return false; - if (bt->hfrontporch > 2 * bt->width || - bt->hsync > 1024 || bt->hbackporch > 1024) + /* + * Some video receivers cannot properly separate the frontporch, + * backporch and sync values, and instead they only have the total + * blanking. That can be assigned to any of these three fields. + * So just check that none of these are way out of range. + */ + if (bt->hfrontporch > max_hor || + bt->hsync > max_hor || bt->hbackporch > max_hor) return false; - if (bt->vfrontporch > 4096 || - bt->vsync > 128 || bt->vbackporch > 4096) + if (bt->vfrontporch > max_vert || + bt->vsync > max_vert || bt->vbackporch > max_vert) return false; - if (bt->interlaced && (bt->il_vfrontporch > 4096 || - bt->il_vsync > 128 || bt->il_vbackporch > 4096)) + if (bt->interlaced && (bt->il_vfrontporch > max_vert || + bt->il_vsync > max_vert || bt->il_vbackporch > max_vert)) return false; return fnc == NULL || fnc(t, fnc_handle); }
From: Tejun Heo tj@kernel.org
commit 4a7ba45b1a435e7097ca0f79a847d0949d0eb088 upstream.
memcg_write_event_control() accesses the dentry->d_name of the specified control fd to route the write call. As a cgroup interface file can't be renamed, it's safe to access d_name as long as the specified file is a regular cgroup file. Also, as these cgroup interface files can't be removed before the directory, it's safe to access the parent too.
Prior to 347c4a874710 ("memcg: remove cgroup_event->cft"), there was a call to __file_cft() which verified that the specified file is a regular cgroupfs file before further accesses. The cftype pointer returned from __file_cft() was no longer necessary and the commit inadvertently dropped the file type check with it allowing any file to slip through. With the invarients broken, the d_name and parent accesses can now race against renames and removals of arbitrary files and cause use-after-free's.
Fix the bug by resurrecting the file type check in __file_cft(). Now that cgroupfs is implemented through kernfs, checking the file operations needs to go through a layer of indirection. Instead, let's check the superblock and dentry type.
Link: https://lkml.kernel.org/r/Y5FRm/cfcKPGzWwl@slm.duckdns.org Fixes: 347c4a874710 ("memcg: remove cgroup_event->cft") Signed-off-by: Tejun Heo tj@kernel.org Reported-by: Jann Horn jannh@google.com Acked-by: Roman Gushchin roman.gushchin@linux.dev Acked-by: Johannes Weiner hannes@cmpxchg.org Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Michal Hocko mhocko@kernel.org Cc: Muchun Song songmuchun@bytedance.com Cc: Shakeel Butt shakeelb@google.com Cc: stable@vger.kernel.org [3.14+] Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/cgroup.h | 1 + kernel/cgroup/cgroup-internal.h | 1 - mm/memcontrol.c | 15 +++++++++++++-- 3 files changed, 14 insertions(+), 3 deletions(-)
--- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -68,6 +68,7 @@ struct css_task_iter { struct list_head iters_node; /* css_set->task_iters */ };
+extern struct file_system_type cgroup_fs_type; extern struct cgroup_root cgrp_dfl_root; extern struct css_set init_css_set;
--- a/kernel/cgroup/cgroup-internal.h +++ b/kernel/cgroup/cgroup-internal.h @@ -122,7 +122,6 @@ extern struct mutex cgroup_mutex; extern spinlock_t css_set_lock; extern struct cgroup_subsys *cgroup_subsys[]; extern struct list_head cgroup_roots; -extern struct file_system_type cgroup_fs_type;
/* iterate across the hierarchies */ #define for_each_root(root) \ --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -3878,6 +3878,7 @@ static ssize_t memcg_write_event_control unsigned int efd, cfd; struct fd efile; struct fd cfile; + struct dentry *cdentry; const char *name; char *endp; int ret; @@ -3929,6 +3930,16 @@ static ssize_t memcg_write_event_control goto out_put_cfile;
/* + * The control file must be a regular cgroup1 file. As a regular cgroup + * file can't be renamed, it's safe to access its name afterwards. + */ + cdentry = cfile.file->f_path.dentry; + if (cdentry->d_sb->s_type != &cgroup_fs_type || !d_is_reg(cdentry)) { + ret = -EINVAL; + goto out_put_cfile; + } + + /* * Determine the event callbacks and set them in @event. This used * to be done via struct cftype but cgroup core no longer knows * about these events. The following is crude but the whole thing @@ -3936,7 +3947,7 @@ static ssize_t memcg_write_event_control * * DO NOT ADD NEW FILES. */ - name = cfile.file->f_path.dentry->d_name.name; + name = cdentry->d_name.name;
if (!strcmp(name, "memory.usage_in_bytes")) { event->register_event = mem_cgroup_usage_register_event; @@ -3960,7 +3971,7 @@ static ssize_t memcg_write_event_control * automatically removed on cgroup destruction but the removal is * asynchronous, so take an extra ref on @css. */ - cfile_css = css_tryget_online_from_dir(cfile.file->f_path.dentry->d_parent, + cfile_css = css_tryget_online_from_dir(cdentry->d_parent, &memory_cgrp_subsys); ret = -EINVAL; if (IS_ERR(cfile_css))
From: Thomas Huth thuth@redhat.com
commit 0dd4cdccdab3d74bd86b868768a7dca216bcce7e upstream.
We recently experienced some weird huge time jumps in nested guests when rebooting them in certain cases. After adding some debug code to the epoch handling in vsie.c (thanks to David Hildenbrand for the idea!), it was obvious that the "epdx" field (the multi-epoch extension) did not get set to 0xff in case the "epoch" field was negative. Seems like the code misses to copy the value from the epdx field from the guest to the shadow control block. By doing so, the weird time jumps are gone in our scenarios.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2140899 Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support") Signed-off-by: Thomas Huth thuth@redhat.com Reviewed-by: Christian Borntraeger borntraeger@linux.ibm.com Acked-by: David Hildenbrand david@redhat.com Reviewed-by: Claudio Imbrenda imbrenda@linux.ibm.com Reviewed-by: Janosch Frank frankja@linux.ibm.com Cc: stable@vger.kernel.org # 4.19+ Link: https://lore.kernel.org/r/20221123090833.292938-1-thuth@redhat.com Message-Id: 20221123090833.292938-1-thuth@redhat.com Signed-off-by: Janosch Frank frankja@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/s390/kvm/vsie.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
--- a/arch/s390/kvm/vsie.c +++ b/arch/s390/kvm/vsie.c @@ -373,8 +373,10 @@ static int shadow_scb(struct kvm_vcpu *v if (test_kvm_cpu_feat(vcpu->kvm, KVM_S390_VM_CPU_FEAT_CEI)) scb_s->eca |= scb_o->eca & ECA_CEI; /* Epoch Extension */ - if (test_kvm_facility(vcpu->kvm, 139)) + if (test_kvm_facility(vcpu->kvm, 139)) { scb_s->ecd |= scb_o->ecd & ECD_MEF; + scb_s->epdx = scb_o->epdx; + }
prepare_ibc(vcpu, vsie_page); rc = shadow_crycb(vcpu, vsie_page);
From: Anastasia Belova abelova@astralinux.ru
commit d180b6496143cd360c5d5f58ae4b9a8229c1f344 upstream.
If an empty buf is received, lbuf is also empty. So lbuf is accessed by index -1.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: f31a2de3fe36 ("HID: hid-lg4ff: Allow switching of Logitech gaming wheels between compatibility modes") Signed-off-by: Anastasia Belova abelova@astralinux.ru Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hid/hid-lg4ff.c | 6 ++++++ 1 file changed, 6 insertions(+)
--- a/drivers/hid/hid-lg4ff.c +++ b/drivers/hid/hid-lg4ff.c @@ -880,6 +880,12 @@ static ssize_t lg4ff_alternate_modes_sto return -ENOMEM;
i = strlen(lbuf); + + if (i == 0) { + kfree(lbuf); + return -EINVAL; + } + if (lbuf[i-1] == '\n') { if (i == 1) { kfree(lbuf);
From: ZhangPeng zhangpeng362@huawei.com
commit ec61b41918587be530398b0d1c9a0d16619397e5 upstream.
Syzbot reported shift-out-of-bounds in hid_report_raw_event.
microsoft 0003:045E:07DA.0001: hid_field_extract() called with n (128) > 32! (swapper/0) ====================================================================== UBSAN: shift-out-of-bounds in drivers/hid/hid-core.c:1323:20 shift exponent 127 is too large for 32-bit type 'int' CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rc4-syzkaller-00159-g4bbf3422df78 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x3a6/0x420 lib/ubsan.c:322 snto32 drivers/hid/hid-core.c:1323 [inline] hid_input_fetch_field drivers/hid/hid-core.c:1572 [inline] hid_process_report drivers/hid/hid-core.c:1665 [inline] hid_report_raw_event+0xd56/0x18b0 drivers/hid/hid-core.c:1998 hid_input_report+0x408/0x4f0 drivers/hid/hid-core.c:2066 hid_irq_in+0x459/0x690 drivers/hid/usbhid/hid-core.c:284 __usb_hcd_giveback_urb+0x369/0x530 drivers/usb/core/hcd.c:1671 dummy_timer+0x86b/0x3110 drivers/usb/gadget/udc/dummy_hcd.c:1988 call_timer_fn+0xf5/0x210 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers+0x76a/0x980 kernel/time/timer.c:1790 run_timer_softirq+0x63/0xf0 kernel/time/timer.c:1803 __do_softirq+0x277/0x75b kernel/softirq.c:571 __irq_exit_rcu+0xec/0x170 kernel/softirq.c:650 irq_exit_rcu+0x5/0x20 kernel/softirq.c:662 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1107 ======================================================================
If the size of the integer (unsigned n) is bigger than 32 in snto32(), shift exponent will be too large for 32-bit type 'int', resulting in a shift-out-of-bounds bug. Fix this by adding a check on the size of the integer (unsigned n) in snto32(). To add support for n greater than 32 bits, set n to 32, if n is greater than 32.
Reported-by: syzbot+8b1641d2f14732407e23@syzkaller.appspotmail.com Fixes: dde5845a529f ("[PATCH] Generic HID layer - code split") Signed-off-by: ZhangPeng zhangpeng362@huawei.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hid/hid-core.c | 3 +++ 1 file changed, 3 insertions(+)
--- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1132,6 +1132,9 @@ static s32 snto32(__u32 value, unsigned if (!value || !n) return 0;
+ if (n > 32) + n = 32; + switch (n) { case 8: return ((__s8)value); case 16: return ((__s16)value);
From: Ziyang Xuan william.xuanziyang@huawei.com
[ Upstream commit 4d002d6a2a00ac1c433899bd7625c6400a74cfba ]
In cc2520_hw_init(), if oscillator start failed, the error code should be returned.
Fixes: 0da6bc8cc341 ("ieee802154: cc2520: adds driver for TI CC2520 radio") Signed-off-by: Ziyang Xuan william.xuanziyang@huawei.com Link: https://lore.kernel.org/r/20221120075046.2213633-1-william.xuanziyang@huawei... Signed-off-by: Stefan Schmidt stefan@datenfreihafen.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ieee802154/cc2520.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c index 436cf2007138..92aefaf8ea19 100644 --- a/drivers/net/ieee802154/cc2520.c +++ b/drivers/net/ieee802154/cc2520.c @@ -979,7 +979,7 @@ static int cc2520_hw_init(struct cc2520_private *priv)
if (timeout-- <= 0) { dev_err(&priv->spi->dev, "oscillator start failed!\n"); - return ret; + return -ETIMEDOUT; } udelay(1); } while (!(status & CC2520_STATUS_XOSC32M_STABLE));
From: Hauke Mehrtens hauke@hauke-m.de
[ Upstream commit 1e24c54da257ab93cff5826be8a793b014a5dc9c ]
The struct cas_control embeds multiple generic SPI structures and we have to make sure these structures are initialized to default values. This driver does not set all attributes. When using kmalloc before some attributes were not initialized and contained random data which caused random crashes at bootup.
Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Hauke Mehrtens hauke@hauke-m.de Link: https://lore.kernel.org/r/20221121002201.1339636-1-hauke@hauke-m.de Signed-off-by: Stefan Schmidt stefan@datenfreihafen.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ieee802154/ca8210.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c index 9a1352f3fa4c..eff7571dbea2 100644 --- a/drivers/net/ieee802154/ca8210.c +++ b/drivers/net/ieee802154/ca8210.c @@ -926,7 +926,7 @@ static int ca8210_spi_transfer(
dev_dbg(&spi->dev, "ca8210_spi_transfer called\n");
- cas_ctl = kmalloc(sizeof(*cas_ctl), GFP_ATOMIC); + cas_ctl = kzalloc(sizeof(*cas_ctl), GFP_ATOMIC); if (!cas_ctl) return -ENOMEM;
From: Xiongfeng Wang wangxiongfeng2@huawei.com
[ Upstream commit 45fecdb9f658d9c82960c98240bc0770ade19aca ]
for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() after the 'out' label. Since pci_dev_put() can handle NULL input parameter, there is no problem for the 'Device not found' branch. For the normal path, add pci_dev_put() in amd_gpio_exit().
Fixes: f942a7de047d ("gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips") Signed-off-by: Xiongfeng Wang wangxiongfeng2@huawei.com Signed-off-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-amd8111.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/gpio/gpio-amd8111.c b/drivers/gpio/gpio-amd8111.c index 30ad7d7c1678..f8486bac12d0 100644 --- a/drivers/gpio/gpio-amd8111.c +++ b/drivers/gpio/gpio-amd8111.c @@ -231,7 +231,10 @@ static int __init amd_gpio_init(void) ioport_unmap(gp.pm); goto out; } + return 0; + out: + pci_dev_put(pdev); return err; }
@@ -239,6 +242,7 @@ static void __exit amd_gpio_exit(void) { gpiochip_remove(&gp.chip); ioport_unmap(gp.pm); + pci_dev_put(gp.pdev); }
module_init(amd_gpio_init);
From: Akihiko Odaki akihiko.odaki@daynix.com
[ Upstream commit eed913f6919e253f35d454b2f115f2a4db2b741a ]
e1000_xmit_frame is expected to stop the queue and dispatch frames to hardware if there is not sufficient space for the next frame in the buffer, but sometimes it failed to do so because the estimated maximum size of frame was wrong. As the consequence, the later invocation of e1000_xmit_frame failed with NETDEV_TX_BUSY, and the frame in the buffer remained forever, resulting in a watchdog failure.
This change fixes the estimated size by making it match with the condition for NETDEV_TX_BUSY. Apparently, the old estimation failed to account for the following lines which determines the space requirement for not causing NETDEV_TX_BUSY: ``` /* reserve a descriptor for the offload context */ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL)) count++; count++;
count += DIV_ROUND_UP(len, adapter->tx_fifo_limit); ```
This issue was found when running http-stress02 test included in Linux Test Project 20220930 on QEMU with the following commandline: ``` qemu-system-x86_64 -M q35,accel=kvm -m 8G -smp 8 -drive if=virtio,format=raw,file=root.img,file.locking=on -device e1000e,netdev=netdev -netdev tap,script=ifup,downscript=no,id=netdev ```
Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Signed-off-by: Akihiko Odaki akihiko.odaki@daynix.com Tested-by: Gurucharan G gurucharanx.g@intel.com (A Contingent worker at Intel) Tested-by: Naama Meir naamax.meir@linux.intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 116914de603e..cb3ff3c2fb03 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5897,9 +5897,9 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, e1000_tx_queue(tx_ring, tx_flags, count); /* Make sure there is space in the ring for the next send. */ e1000_maybe_stop_tx(tx_ring, - (MAX_SKB_FRAGS * + ((MAX_SKB_FRAGS + 1) * DIV_ROUND_UP(PAGE_SIZE, - adapter->tx_fifo_limit) + 2)); + adapter->tx_fifo_limit) + 4));
if (!skb->xmit_more || netif_xmit_stopped(netdev_get_tx_queue(netdev, 0))) {
From: Akihiko Odaki akihiko.odaki@daynix.com
[ Upstream commit 28e96556baca7056d11d9fb3cdd0aba4483e00d8 ]
Without this change, the interrupt test fail with MSI-X environment:
$ sudo ethtool -t enp0s2 offline [ 43.921783] igb 0000:00:02.0: offline testing starting [ 44.855824] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Down [ 44.961249] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 51.272202] igb 0000:00:02.0: testing shared interrupt [ 56.996975] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX The test result is FAIL The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 4 Loopback test (offline) 0 Link test (on/offline) 0
Here, "4" means an expected interrupt was not delivered.
To fix this, route IRQs correctly to the first MSI-X vector by setting IVAR_MISC. Also, set bit 0 of EIMS so that the vector will not be masked. The interrupt test now runs properly with this change:
$ sudo ethtool -t enp0s2 offline [ 42.762985] igb 0000:00:02.0: offline testing starting [ 50.141967] igb 0000:00:02.0: testing shared interrupt [ 56.163957] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX The test result is PASS The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 0 Link test (on/offline) 0
Fixes: 4eefa8f01314 ("igb: add single vector msi-x testing to interrupt test") Signed-off-by: Akihiko Odaki akihiko.odaki@daynix.com Reviewed-by: Maciej Fijalkowski maciej.fijalkowski@intel.com Tested-by: Gurucharan G gurucharanx.g@intel.com (A Contingent worker at Intel) Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index ff2be34bff39..049a67c14780 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -1419,6 +1419,8 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data) *data = 1; return -1; } + wr32(E1000_IVAR_MISC, E1000_IVAR_VALID << 8); + wr32(E1000_EIMS, BIT(0)); } else if (adapter->flags & IGB_FLAG_HAS_MSI) { shared_int = false; if (request_irq(irq,
From: Wang ShaoBo bobo.shaobowang@huawei.com
[ Upstream commit 747da1308bdd5021409974f9180f0d8ece53d142 ]
hci_get_route() takes reference, we should use hci_dev_put() to release it when not need anymore.
Fixes: 6b8d4a6a0314 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one") Signed-off-by: Wang ShaoBo bobo.shaobowang@huawei.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/6lowpan.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c index 9a75f9b00b51..4530ffb2481a 100644 --- a/net/bluetooth/6lowpan.c +++ b/net/bluetooth/6lowpan.c @@ -1014,6 +1014,7 @@ static int get_l2cap_conn(char *buf, bdaddr_t *addr, u8 *addr_type, hci_dev_lock(hdev); hcon = hci_conn_hash_lookup_le(hdev, addr, *addr_type); hci_dev_unlock(hdev); + hci_dev_put(hdev);
if (!hcon) return -ENOENT;
From: Wei Yongjun weiyongjun1@huawei.com
[ Upstream commit b3d72d3135d2ef68296c1ee174436efd65386f04 ]
Kernel fault injection test reports null-ptr-deref as follows:
BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:cfg802154_netdev_notifier_call+0x120/0x310 include/linux/list.h:114 Call Trace: <TASK> raw_notifier_call_chain+0x6d/0xa0 kernel/notifier.c:87 call_netdevice_notifiers_info+0x6e/0xc0 net/core/dev.c:1944 unregister_netdevice_many_notify+0x60d/0xcb0 net/core/dev.c:1982 unregister_netdevice_queue+0x154/0x1a0 net/core/dev.c:10879 register_netdevice+0x9a8/0xb90 net/core/dev.c:10083 ieee802154_if_add+0x6ed/0x7e0 net/mac802154/iface.c:659 ieee802154_register_hw+0x29c/0x330 net/mac802154/main.c:229 mcr20a_probe+0xaaa/0xcb1 drivers/net/ieee802154/mcr20a.c:1316
ieee802154_if_add() allocates wpan_dev as netdev's private data, but not init the list in struct wpan_dev. cfg802154_netdev_notifier_call() manage the list when device register/unregister, and may lead to null-ptr-deref.
Use INIT_LIST_HEAD() on it to initialize it correctly.
Fixes: fcf39e6e88e9 ("ieee802154: add wpan_dev_list") Signed-off-by: Wei Yongjun weiyongjun1@huawei.com Acked-by: Alexander Aring aahringo@redhat.com
Link: https://lore.kernel.org/r/20221130091705.1831140-1-weiyongjun@huaweicloud.co... Signed-off-by: Stefan Schmidt stefan@datenfreihafen.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac802154/iface.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/net/mac802154/iface.c b/net/mac802154/iface.c index bd88a9b80773..8c2aedf3fa74 100644 --- a/net/mac802154/iface.c +++ b/net/mac802154/iface.c @@ -669,6 +669,7 @@ ieee802154_if_add(struct ieee802154_local *local, const char *name, sdata->dev = ndev; sdata->wpan_dev.wpan_phy = local->hw.phy; sdata->local = local; + INIT_LIST_HEAD(&sdata->wpan_dev.list);
/* setup type-dependent data */ ret = ieee802154_setup_sdata(sdata, type);
From: Valentina Goncharenko goncharenko.vp@ispras.ru
[ Upstream commit 167b3f2dcc62c271f3555b33df17e361bb1fa0ee ]
In functions regmap_encx24j600_phy_reg_read() and regmap_encx24j600_phy_reg_write() in the conditions of the waiting cycles for filling the variable 'ret' it is necessary to add parentheses to prevent wrong assignment due to logical operations precedence.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d70e53262f5c ("net: Microchip encx24j600 driver") Signed-off-by: Valentina Goncharenko goncharenko.vp@ispras.ru Reviewed-by: Pavan Chebbi pavan.chebbi@broadcom.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/microchip/encx24j600-regmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/microchip/encx24j600-regmap.c b/drivers/net/ethernet/microchip/encx24j600-regmap.c index 46181559d1f1..4a3c0870c8e4 100644 --- a/drivers/net/ethernet/microchip/encx24j600-regmap.c +++ b/drivers/net/ethernet/microchip/encx24j600-regmap.c @@ -367,7 +367,7 @@ static int regmap_encx24j600_phy_reg_read(void *context, unsigned int reg, goto err_out;
usleep_range(26, 100); - while ((ret = regmap_read(ctx->regmap, MISTAT, &mistat) != 0) && + while (((ret = regmap_read(ctx->regmap, MISTAT, &mistat)) != 0) && (mistat & BUSY)) cpu_relax();
@@ -405,7 +405,7 @@ static int regmap_encx24j600_phy_reg_write(void *context, unsigned int reg, goto err_out;
usleep_range(26, 100); - while ((ret = regmap_read(ctx->regmap, MISTAT, &mistat) != 0) && + while (((ret = regmap_read(ctx->regmap, MISTAT, &mistat)) != 0) && (mistat & BUSY)) cpu_relax();
From: Valentina Goncharenko goncharenko.vp@ispras.ru
[ Upstream commit 25f427ac7b8d89b0259f86c0c6407b329df742b2 ]
A loop for reading MISTAT register continues while regmap_read() fails and (mistat & BUSY), but if regmap_read() fails a value of mistat is undefined.
The patch proposes to check for BUSY flag only when regmap_read() succeed. Compile test only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d70e53262f5c ("net: Microchip encx24j600 driver") Signed-off-by: Valentina Goncharenko goncharenko.vp@ispras.ru Reviewed-by: Pavan Chebbi pavan.chebbi@broadcom.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/microchip/encx24j600-regmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/microchip/encx24j600-regmap.c b/drivers/net/ethernet/microchip/encx24j600-regmap.c index 4a3c0870c8e4..4a8d9633e082 100644 --- a/drivers/net/ethernet/microchip/encx24j600-regmap.c +++ b/drivers/net/ethernet/microchip/encx24j600-regmap.c @@ -367,7 +367,7 @@ static int regmap_encx24j600_phy_reg_read(void *context, unsigned int reg, goto err_out;
usleep_range(26, 100); - while (((ret = regmap_read(ctx->regmap, MISTAT, &mistat)) != 0) && + while (((ret = regmap_read(ctx->regmap, MISTAT, &mistat)) == 0) && (mistat & BUSY)) cpu_relax();
@@ -405,7 +405,7 @@ static int regmap_encx24j600_phy_reg_write(void *context, unsigned int reg, goto err_out;
usleep_range(26, 100); - while (((ret = regmap_read(ctx->regmap, MISTAT, &mistat)) != 0) && + while (((ret = regmap_read(ctx->regmap, MISTAT, &mistat)) == 0) && (mistat & BUSY)) cpu_relax();
From: Dan Carpenter error27@gmail.com
[ Upstream commit e8b4fc13900b8e8be48debffd0dfd391772501f7 ]
The pp->indir[0] value comes from the user. It is passed to:
if (cpu_online(pp->rxq_def))
inside the mvneta_percpu_elect() function. It needs bounds checkeding to ensure that it is not beyond the end of the cpu bitmap.
Fixes: cad5d847a093 ("net: mvneta: Fix the CPU choice in mvneta_percpu_elect") Signed-off-by: Dan Carpenter error27@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/marvell/mvneta.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 8fde1515aec7..526705c21550 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3871,6 +3871,9 @@ static int mvneta_config_rss(struct mvneta_port *pp) napi_disable(&pcpu_port->napi); }
+ if (pp->indir[0] >= nr_cpu_ids) + return -EINVAL; + pp->rxq_def = pp->indir[0];
/* Update unicast mapping */
From: Kees Cook keescook@chromium.org
[ Upstream commit e329e71013c9b5a4535b099208493c7826ee4a64 ]
While running under CONFIG_FORTIFY_SOURCE=y, syzkaller reported:
memcpy: detected field-spanning write (size 129) of single field "target->sensf_res" at net/nfc/nci/ntf.c:260 (size 18)
This appears to be a legitimate lack of bounds checking in nci_add_new_protocol(). Add the missing checks.
Reported-by: syzbot+210e196cef4711b65139@syzkaller.appspotmail.com Link: https://lore.kernel.org/lkml/0000000000001c590f05ee7b3ff4@google.com Fixes: 019c4fbaa790 ("NFC: Add NCI multiple targets support") Signed-off-by: Kees Cook keescook@chromium.org Reviewed-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Link: https://lore.kernel.org/r/20221202214410.never.693-kees@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/nfc/nci/ntf.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/net/nfc/nci/ntf.c b/net/nfc/nci/ntf.c index 1e8c1a12aaec..4f75453c07aa 100644 --- a/net/nfc/nci/ntf.c +++ b/net/nfc/nci/ntf.c @@ -230,6 +230,8 @@ static int nci_add_new_protocol(struct nci_dev *ndev, target->sens_res = nfca_poll->sens_res; target->sel_res = nfca_poll->sel_res; target->nfcid1_len = nfca_poll->nfcid1_len; + if (target->nfcid1_len > ARRAY_SIZE(target->nfcid1)) + return -EPROTO; if (target->nfcid1_len > 0) { memcpy(target->nfcid1, nfca_poll->nfcid1, target->nfcid1_len); @@ -238,6 +240,8 @@ static int nci_add_new_protocol(struct nci_dev *ndev, nfcb_poll = (struct rf_tech_specific_params_nfcb_poll *)params;
target->sensb_res_len = nfcb_poll->sensb_res_len; + if (target->sensb_res_len > ARRAY_SIZE(target->sensb_res)) + return -EPROTO; if (target->sensb_res_len > 0) { memcpy(target->sensb_res, nfcb_poll->sensb_res, target->sensb_res_len); @@ -246,6 +250,8 @@ static int nci_add_new_protocol(struct nci_dev *ndev, nfcf_poll = (struct rf_tech_specific_params_nfcf_poll *)params;
target->sensf_res_len = nfcf_poll->sensf_res_len; + if (target->sensf_res_len > ARRAY_SIZE(target->sensf_res)) + return -EPROTO; if (target->sensf_res_len > 0) { memcpy(target->sensf_res, nfcf_poll->sensf_res, target->sensf_res_len);
From: Jisheng Zhang jszhang@kernel.org
[ Upstream commit 61d4f140943c47c1386ed89f7260e00418dfad9d ]
In dt-binding snps,dwmac.yaml, some properties under "snps,axi-config" node are named without "axi_" prefix, but the driver expects the prefix. Since the dt-binding has been there for a long time, we'd better make driver match the binding for compatibility.
Fixes: afea03656add ("stmmac: rework DMA bus setting and introduce new platform AXI structure") Signed-off-by: Jisheng Zhang jszhang@kernel.org Link: https://lore.kernel.org/r/20221202161739.2203-1-jszhang@kernel.org Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 14d11f9fcbe8..07951b43de21 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -115,10 +115,10 @@ static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev)
axi->axi_lpi_en = of_property_read_bool(np, "snps,lpi_en"); axi->axi_xit_frm = of_property_read_bool(np, "snps,xit_frm"); - axi->axi_kbbe = of_property_read_bool(np, "snps,axi_kbbe"); - axi->axi_fb = of_property_read_bool(np, "snps,axi_fb"); - axi->axi_mb = of_property_read_bool(np, "snps,axi_mb"); - axi->axi_rb = of_property_read_bool(np, "snps,axi_rb"); + axi->axi_kbbe = of_property_read_bool(np, "snps,kbbe"); + axi->axi_fb = of_property_read_bool(np, "snps,fb"); + axi->axi_mb = of_property_read_bool(np, "snps,mb"); + axi->axi_rb = of_property_read_bool(np, "snps,rb");
if (of_property_read_u32(np, "snps,wr_osr_lmt", &axi->axi_wr_osr_lmt)) axi->axi_wr_osr_lmt = 1;
From: Liu Jian liujian56@huawei.com
[ Upstream commit 4640177049549de1a43e9bc49265f0cdfce08cfd ]
The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free.
Fixes: 542ae60af24f ("net: hisilicon: Add Fast Ethernet MAC driver") Signed-off-by: Liu Jian liujian56@huawei.com Link: https://lore.kernel.org/r/20221203094240.1240211-1-liujian56@huawei.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hisi_femac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hisi_femac.c b/drivers/net/ethernet/hisilicon/hisi_femac.c index 2c2808830e95..f29040520ca0 100644 --- a/drivers/net/ethernet/hisilicon/hisi_femac.c +++ b/drivers/net/ethernet/hisilicon/hisi_femac.c @@ -295,7 +295,7 @@ static int hisi_femac_rx(struct net_device *dev, int limit) skb->protocol = eth_type_trans(skb, dev); napi_gro_receive(&priv->napi, skb); dev->stats.rx_packets++; - dev->stats.rx_bytes += skb->len; + dev->stats.rx_bytes += len; next: pos = (pos + 1) % rxq->num; if (rx_pkts_num >= limit)
From: Liu Jian liujian56@huawei.com
[ Upstream commit 433c07a13f59856e4585e89e86b7d4cc59348fab ]
The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free.
Fixes: 57c5bc9ad7d7 ("net: hisilicon: add hix5hd2 mac driver") Signed-off-by: Liu Jian liujian56@huawei.com Link: https://lore.kernel.org/r/20221203094240.1240211-2-liujian56@huawei.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hix5hd2_gmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c b/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c index 6adf6831d120..55e344ee1572 100644 --- a/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c +++ b/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c @@ -554,7 +554,7 @@ static int hix5hd2_rx(struct net_device *dev, int limit) skb->protocol = eth_type_trans(skb, dev); napi_gro_receive(&priv->napi, skb); dev->stats.rx_packets++; - dev->stats.rx_bytes += skb->len; + dev->stats.rx_bytes += len; next: pos = dma_ring_incr(pos, RX_DESC_NUM); }
From: YueHaibing yuehaibing@huawei.com
[ Upstream commit 743117a997bbd4840e827295c07e59bcd7f7caa3 ]
Fix the potential risk of OOB if skb_linearize() fails in tipc_link_proto_rcv().
Fixes: 5cbb28a4bf65 ("tipc: linearize arriving NAME_DISTR and LINK_PROTO buffers") Signed-off-by: YueHaibing yuehaibing@huawei.com Link: https://lore.kernel.org/r/20221203094635.29024-1-yuehaibing@huawei.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/tipc/link.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/tipc/link.c b/net/tipc/link.c index d3017811b67a..edcc768a17ce 100644 --- a/net/tipc/link.c +++ b/net/tipc/link.c @@ -1477,7 +1477,9 @@ static int tipc_link_proto_rcv(struct tipc_link *l, struct sk_buff *skb, if (tipc_own_addr(l->net) > msg_prevnode(hdr)) l->net_plane = msg_net_plane(hdr);
- skb_linearize(skb); + if (skb_linearize(skb)) + goto exit; + hdr = buf_msg(skb); data = msg_data(hdr);
From: Zhang Changzhong zhangchangzhong@huawei.com
[ Upstream commit 063a932b64db3317ec020c94466fe52923a15f60 ]
The greth_init_rings() function won't free the newly allocated skb when dma_mapping_error() returns error, so add dev_kfree_skb() to fix it.
Compile tested only.
Fixes: d4c41139df6e ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver") Signed-off-by: Zhang Changzhong zhangchangzhong@huawei.com Reviewed-by: Leon Romanovsky leonro@nvidia.com Link: https://lore.kernel.org/r/1670134149-29516-1-git-send-email-zhangchangzhong@... Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/aeroflex/greth.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/aeroflex/greth.c b/drivers/net/ethernet/aeroflex/greth.c index a20e95b39cf7..4df8da8f5e7e 100644 --- a/drivers/net/ethernet/aeroflex/greth.c +++ b/drivers/net/ethernet/aeroflex/greth.c @@ -262,6 +262,7 @@ static int greth_init_rings(struct greth_private *greth) if (dma_mapping_error(greth->dev, dma_addr)) { if (netif_msg_ifup(greth)) dev_err(greth->dev, "Could not create initial DMA mapping\n"); + dev_kfree_skb(skb); goto cleanup; } greth->rx_skbuff[i] = skb;
From: Juergen Gross jgross@suse.com
[ Upstream commit 7dfa764e0223a324366a2a1fc056d4d9d4e95491 ]
Commit ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") introduced a (valid) build warning. There have even been reports of this problem breaking networking of Xen guests.
Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") Signed-off-by: Juergen Gross jgross@suse.com Reviewed-by: Jan Beulich jbeulich@suse.com Reviewed-by: Ross Lagerwall ross.lagerwall@citrix.com Tested-by: Jason Andryuk jandryuk@gmail.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/xen-netback/netback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 665c96f4d7e4..9d4bf69ab7b8 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -523,7 +523,7 @@ static int xenvif_tx_check_gop(struct xenvif_queue *queue, const bool sharedslot = nr_frags && frag_get_pending_idx(&shinfo->frags[0]) == copy_pending_idx(skb, copy_count(skb) - 1); - int i, err; + int i, err = 0;
for (i = 0; i < copy_count(skb); i++) { int newerr;
From: Yang Yingliang yangyingliang@huawei.com
[ Upstream commit 7d8c19bfc8ff3f78e5337107ca9246327fcb6b45 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb/dev_kfree_skb() with dev_kfree_skb_irq() and dev_consume_skb_irq() under spin_lock_irq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Reviewed-by: Jiri Pirko jiri@nvidia.com Link: https://lore.kernel.org/r/20221207015310.2984909-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/plip/plip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/plip/plip.c b/drivers/net/plip/plip.c index 3c55ea357f35..f4eaafb84cbe 100644 --- a/drivers/net/plip/plip.c +++ b/drivers/net/plip/plip.c @@ -448,12 +448,12 @@ plip_bh_timeout_error(struct net_device *dev, struct net_local *nl, } rcv->state = PLIP_PK_DONE; if (rcv->skb) { - kfree_skb(rcv->skb); + dev_kfree_skb_irq(rcv->skb); rcv->skb = NULL; } snd->state = PLIP_PK_DONE; if (snd->skb) { - dev_kfree_skb(snd->skb); + dev_consume_skb_irq(snd->skb); snd->skb = NULL; } spin_unlock_irq(&nl->lock);
From: Eric Dumazet edumazet@google.com
[ Upstream commit 803e84867de59a1e5d126666d25eb4860cfd2ebe ]
Blamed commit claimed rcu_read_lock() was held by ip6_fragment() callers.
It seems to not be always true, at least for UDP stack.
syzbot reported:
BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:245 [inline] BUG: KASAN: use-after-free in ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951 Read of size 8 at addr ffff88801d403e80 by task syz-executor.3/7618
CPU: 1 PID: 7618 Comm: syz-executor.3 Not tainted 6.1.0-rc6-syzkaller-00012-g4312098baf37 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x45d mm/kasan/report.c:395 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495 ip6_dst_idev include/net/ip6_fib.h:245 [inline] ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline] ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 sock_write_iter+0x295/0x3d0 net/socket.c:1108 call_write_iter include/linux/fs.h:2191 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9ed/0xdd0 fs/read_write.c:584 ksys_write+0x1ec/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fde3588c0d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fde365b6168 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fde359ac050 RCX: 00007fde3588c0d9 RDX: 000000000000ffdc RSI: 00000000200000c0 RDI: 000000000000000a RBP: 00007fde358e7ae9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fde35acfb1f R14: 00007fde365b6300 R15: 0000000000022000 </TASK>
Allocated by task 7618: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x82/0x90 mm/kasan/common.c:325 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3398 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc+0x2b4/0x3d0 mm/slub.c:3422 dst_alloc+0x14a/0x1f0 net/core/dst.c:92 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344 ip6_rt_pcpu_alloc net/ipv6/route.c:1369 [inline] rt6_make_pcpu_route net/ipv6/route.c:1417 [inline] ip6_pol_route+0x901/0x1190 net/ipv6/route.c:2254 pol_lookup_func include/net/ip6_fib.h:582 [inline] fib6_rule_lookup+0x52e/0x6f0 net/ipv6/fib6_rules.c:121 ip6_route_output_flags_noref+0x2e6/0x380 net/ipv6/route.c:2625 ip6_route_output_flags+0x76/0x320 net/ipv6/route.c:2638 ip6_route_output include/net/ip6_route.h:98 [inline] ip6_dst_lookup_tail+0x5ab/0x1620 net/ipv6/ip6_output.c:1092 ip6_dst_lookup_flow+0x90/0x1d0 net/ipv6/ip6_output.c:1222 ip6_sk_dst_lookup_flow+0x553/0x980 net/ipv6/ip6_output.c:1260 udpv6_sendmsg+0x151d/0x2c80 net/ipv6/udp.c:1554 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 __sys_sendto+0x23a/0x340 net/socket.c:2117 __do_sys_sendto net/socket.c:2129 [inline] __se_sys_sendto net/socket.c:2125 [inline] __x64_sys_sendto+0xe1/0x1b0 net/socket.c:2125 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 7599: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2e/0x40 mm/kasan/generic.c:511 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x160/0x1c0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1724 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1750 slab_free mm/slub.c:3661 [inline] kmem_cache_free+0xee/0x5c0 mm/slub.c:3683 dst_destroy+0x2ea/0x400 net/core/dst.c:127 rcu_do_batch kernel/rcu/tree.c:2250 [inline] rcu_core+0x81f/0x1980 kernel/rcu/tree.c:2510 __do_softirq+0x1fb/0xadc kernel/softirq.c:571
Last potentially related work creation: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:481 call_rcu+0x9d/0x820 kernel/rcu/tree.c:2798 dst_release net/core/dst.c:177 [inline] dst_release+0x7d/0xe0 net/core/dst.c:167 refdst_drop include/net/dst.h:256 [inline] skb_dst_drop include/net/dst.h:268 [inline] skb_release_head_state+0x250/0x2a0 net/core/skbuff.c:838 skb_release_all net/core/skbuff.c:852 [inline] __kfree_skb net/core/skbuff.c:868 [inline] kfree_skb_reason+0x151/0x4b0 net/core/skbuff.c:891 kfree_skb_list_reason+0x4b/0x70 net/core/skbuff.c:901 kfree_skb_list include/linux/skbuff.h:1227 [inline] ip6_fragment+0x2026/0x2770 net/ipv6/ip6_output.c:949 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline] ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 sock_write_iter+0x295/0x3d0 net/socket.c:1108 call_write_iter include/linux/fs.h:2191 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9ed/0xdd0 fs/read_write.c:584 ksys_write+0x1ec/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd
Second to last potentially related work creation: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:481 call_rcu+0x9d/0x820 kernel/rcu/tree.c:2798 dst_release net/core/dst.c:177 [inline] dst_release+0x7d/0xe0 net/core/dst.c:167 refdst_drop include/net/dst.h:256 [inline] skb_dst_drop include/net/dst.h:268 [inline] __dev_queue_xmit+0x1b9d/0x3ba0 net/core/dev.c:4211 dev_queue_xmit include/linux/netdevice.h:3008 [inline] neigh_resolve_output net/core/neighbour.c:1552 [inline] neigh_resolve_output+0x51b/0x840 net/core/neighbour.c:1532 neigh_output include/net/neighbour.h:546 [inline] ip6_finish_output2+0x56c/0x1530 net/ipv6/ip6_output.c:134 __ip6_finish_output net/ipv6/ip6_output.c:195 [inline] ip6_finish_output+0x694/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] NF_HOOK include/linux/netfilter.h:302 [inline] NF_HOOK include/linux/netfilter.h:296 [inline] mld_sendpack+0xa09/0xe70 net/ipv6/mcast.c:1820 mld_send_cr net/ipv6/mcast.c:2121 [inline] mld_ifc_work+0x720/0xdc0 net/ipv6/mcast.c:2653 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
The buggy address belongs to the object at ffff88801d403dc0 which belongs to the cache ip6_dst_cache of size 240 The buggy address is located 192 bytes inside of 240-byte region [ffff88801d403dc0, ffff88801d403eb0)
The buggy address belongs to the physical page: page:ffffea00007500c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d403 memcg:ffff888022f49c81 flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000200 ffffea0001ef6580 dead000000000002 ffff88814addf640 raw: 0000000000000000 00000000800c000c 00000001ffffffff ffff888022f49c81 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 3719, tgid 3719 (kworker/0:6), ts 136223432244, free_ts 136222971441 prep_new_page mm/page_alloc.c:2539 [inline] get_page_from_freelist+0x10b5/0x2d50 mm/page_alloc.c:4288 __alloc_pages+0x1cb/0x5b0 mm/page_alloc.c:5555 alloc_pages+0x1aa/0x270 mm/mempolicy.c:2285 alloc_slab_page mm/slub.c:1794 [inline] allocate_slab+0x213/0x300 mm/slub.c:1939 new_slab mm/slub.c:1992 [inline] ___slab_alloc+0xa91/0x1400 mm/slub.c:3180 __slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3279 slab_alloc_node mm/slub.c:3364 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc+0x31a/0x3d0 mm/slub.c:3422 dst_alloc+0x14a/0x1f0 net/core/dst.c:92 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344 icmp6_dst_alloc+0x71/0x680 net/ipv6/route.c:3261 mld_sendpack+0x5de/0xe70 net/ipv6/mcast.c:1809 mld_send_cr net/ipv6/mcast.c:2121 [inline] mld_ifc_work+0x720/0xdc0 net/ipv6/mcast.c:2653 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1459 [inline] free_pcp_prepare+0x65c/0xd90 mm/page_alloc.c:1509 free_unref_page_prepare mm/page_alloc.c:3387 [inline] free_unref_page+0x1d/0x4d0 mm/page_alloc.c:3483 __unfreeze_partials+0x17c/0x1a0 mm/slub.c:2586 qlink_free mm/kasan/quarantine.c:168 [inline] qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187 kasan_quarantine_reduce+0x184/0x210 mm/kasan/quarantine.c:294 __kasan_slab_alloc+0x66/0x90 mm/kasan/common.c:302 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3398 [inline] kmem_cache_alloc_node+0x304/0x410 mm/slub.c:3443 __alloc_skb+0x214/0x300 net/core/skbuff.c:497 alloc_skb include/linux/skbuff.h:1267 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1191 [inline] netlink_sendmsg+0x9a6/0xe10 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 __sys_sendto+0x23a/0x340 net/socket.c:2117 __do_sys_sendto net/socket.c:2129 [inline] __se_sys_sendto net/socket.c:2125 [inline] __x64_sys_sendto+0xe1/0x1b0 net/socket.c:2125 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 1758fd4688eb ("ipv6: remove unnecessary dst_hold() in ip6_fragment()") Reported-by: syzbot+8c0ac31aa9681abb9e2d@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet edumazet@google.com Cc: Wei Wang weiwan@google.com Cc: Martin KaFai Lau kafai@fb.com Link: https://lore.kernel.org/r/20221206101351.2037285-1-edumazet@google.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/ip6_output.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index fbad7828568f..4f40331ceb5a 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -756,6 +756,9 @@ int ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb, ipv6_hdr(skb)->payload_len = htons(first_len - sizeof(struct ipv6hdr));
+ /* We prevent @rt from being freed. */ + rcu_read_lock(); + for (;;) { /* Prepare header of the next frame, * before previous one went down. */ @@ -798,6 +801,7 @@ int ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb, if (err == 0) { IP6_INC_STATS(net, ip6_dst_idev(&rt->dst), IPSTATS_MIB_FRAGOKS); + rcu_read_unlock(); return 0; }
@@ -805,6 +809,7 @@ int ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb,
IP6_INC_STATS(net, ip6_dst_idev(&rt->dst), IPSTATS_MIB_FRAGFAILS); + rcu_read_unlock(); return err;
slow_path_clean:
From: Dan Carpenter error27@gmail.com
[ Upstream commit cdd97383e19d4afe29adc3376025a15ae3bab3a3 ]
In an earlier commit, I added a bounds check to prevent an out of bounds read and a WARN(). On further discussion and consideration that check was probably too aggressive. Instead of returning -EINVAL, a better fix would be to just prevent the out of bounds read but continue the process.
Background: The value of "pp->rxq_def" is a number between 0-7 by default, or even higher depending on the value of "rxq_number", which is a module parameter. If the value is more than the number of available CPUs then it will trigger the WARN() in cpu_max_bits_warn().
Fixes: e8b4fc13900b ("net: mvneta: Prevent out of bounds read in mvneta_config_rss()") Signed-off-by: Dan Carpenter error27@gmail.com Reviewed-by: Leon Romanovsky leonro@nvidia.com Link: https://lore.kernel.org/r/Y5A7d1E5ccwHTYPf@kadam Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/marvell/mvneta.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 526705c21550..dbed8fbedd8a 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3362,7 +3362,7 @@ static void mvneta_percpu_elect(struct mvneta_port *pp) /* Use the cpu associated to the rxq when it is online, in all * the other cases, use the cpu 0 which can't be offline. */ - if (cpu_online(pp->rxq_def)) + if (pp->rxq_def < nr_cpu_ids && cpu_online(pp->rxq_def)) elected_cpu = pp->rxq_def;
max_cpu = num_present_cpus(); @@ -3871,9 +3871,6 @@ static int mvneta_config_rss(struct mvneta_port *pp) napi_disable(&pcpu_port->napi); }
- if (pp->indir[0] >= nr_cpu_ids) - return -EINVAL; - pp->rxq_def = pp->indir[0];
/* Update unicast mapping */
On Mon, Dec 12, 2022 at 8:53 AM Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 4.14.302 release. There are 38 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Dec 2022 13:08:57 +0000. Anything received after that time might be too late.
4.14.302-rc1 compiled and booted on x86_64 test systems, no errors or regressions.
Yours, -- Slade
On Mon, Dec 12, 2022 at 02:19:01PM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.14.302 release. There are 38 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Dec 2022 13:08:57 +0000. Anything received after that time might be too late.
Build results: total: 168 pass: 168 fail: 0 Qemu test results: total: 422 pass: 422 fail: 0
Tested-by: Guenter Roeck linux@roeck-us.net
Guenter
On Mon, 12 Dec 2022 at 19:23, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 4.14.302 release. There are 38 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Dec 2022 13:08:57 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.302-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing lkft@linaro.org
NOTE: same arm tinyconfig build warnings / errors as on the linux-4.19.y kernel.
## Build * kernel: 4.14.302-rc1 * git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc * git branch: linux-4.14.y * git commit: 30e132795eb838b35e2ecd48395d47a0a4a6de7c * git describe: v4.14.301-39-g30e132795eb8 * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14....
## Test Regressions (compared to v4.14.301)
## Metric Regressions (compared to v4.14.301)
## Test Fixes (compared to v4.14.301)
## Metric Fixes (compared to v4.14.301)
## Test result summary total: 89742, pass: 77542, fail: 1617, skip: 9655, xfail: 928
## Build Summary * arc: 10 total, 10 passed, 0 failed * arm: 313 total, 306 passed, 7 failed * arm64: 53 total, 50 passed, 3 failed * i386: 29 total, 28 passed, 1 failed * mips: 41 total, 41 passed, 0 failed * parisc: 12 total, 12 passed, 0 failed * powerpc: 20 total, 19 passed, 1 failed * s390: 15 total, 11 passed, 4 failed * sh: 24 total, 24 passed, 0 failed * sparc: 12 total, 12 passed, 0 failed * x86_64: 51 total, 50 passed, 1 failed
## Test suites summary * boot * fwts * igt-gpu-tools * kselftest-android * kselftest-arm64 * kselftest-arm64/arm64.btitest.bti_c_func * kselftest-arm64/arm64.btitest.bti_j_func * kselftest-arm64/arm64.btitest.bti_jc_func * kselftest-arm64/arm64.btitest.bti_none_func * kselftest-arm64/arm64.btitest.nohint_func * kselftest-arm64/arm64.btitest.paciasp_func * kselftest-arm64/arm64.nobtitest.bti_c_func * kselftest-arm64/arm64.nobtitest.bti_j_func * kselftest-arm64/arm64.nobtitest.bti_jc_func * kselftest-arm64/arm64.nobtitest.bti_none_func * kselftest-arm64/arm64.nobtitest.nohint_func * kselftest-arm64/arm64.nobtitest.paciasp_func * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-drivers-dma-buf * kselftest-efivarfs * kselftest-filesystems * kselftest-filesystems-binderfs * kselftest-firmware * kselftest-fpu * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-livepatch * kselftest-membarrier * kselftest-net * kselftest-net-forwarding * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-ptrace * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-splice * kselftest-static_keys * kselftest-sync * kselftest-sysctl * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-vm * kselftest-x86 * kselftest-zram * kunit * kvm-unit-tests * libhugetlbfs * log-parser-boot * log-parser-test * ltp-cap_bounds * ltp-commands * ltp-containers * ltp-controllers * ltp-cpuhotplug * ltp-crypto * ltp-cve * ltp-dio * ltp-fcntl-locktests * ltp-filecaps * ltp-fs * ltp-fs_bind * ltp-fs_perms_simple * ltp-fsx * ltp-hugetlb * ltp-io * ltp-ipc * ltp-math * ltp-mm * ltp-nptl * ltp-open-posix-tests * ltp-pty * ltp-sched * ltp-securebits * ltp-smoke * ltp-syscalls * ltp-tracing * network-basic-tests * packetdrill * rcutorture * v4l2-compliance * vdso
-- Linaro LKFT https://lkft.linaro.org
linux-stable-mirror@lists.linaro.org