With the exception of modesets which would switch the DPMS state of a connector from on to off, we want to make sure that we disallow all modesets which would result in enabling a new monitor or a new mode configuration on a monitor if the connector for the display in question is no longer registered. This allows us to stop userspace from trying to enable new displays on connectors for an MST topology that were just removed from the system, without preventing userspace from disabling DPMS on those connectors.
Signed-off-by: Lyude Paul lyude@redhat.com Cc: stable@vger.kernel.org --- drivers/gpu/drm/drm_atomic_helper.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 80be74df7ba6..ce2decfc6826 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -307,6 +307,26 @@ update_connector_routing(struct drm_atomic_state *state, return 0; }
+ crtc_state = drm_atomic_get_new_crtc_state(state, + new_connector_state->crtc); + /* + * For compatibility with legacy users, we want to make sure that + * we allow DPMS On->Off modesets on unregistered connectors. Modesets + * which would result in anything else must be considered invalid, to + * avoid turning on new displays on dead connectors. + * + * Since the connector can be unregistered at any point during an + * atomic check or commit, this is racy. But that's OK: all we care + * about is ensuring that userspace can't do anything but shut off the + * display on a connector that was destroyed after it's been notified, + * not before. + */ + if (!READ_ONCE(connector->registered) && crtc_state->active) { + DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] is not registered\n", + connector->base.id, connector->name); + return -EINVAL; + } + funcs = connector->helper_private;
if (funcs->atomic_best_encoder) @@ -351,7 +371,6 @@ update_connector_routing(struct drm_atomic_state *state,
set_best_encoder(state, new_connector_state, new_encoder);
- crtc_state = drm_atomic_get_new_crtc_state(state, new_connector_state->crtc); crtc_state->connectors_changed = true;
DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] using [ENCODER:%d:%s] on [CRTC:%d:%s]\n",
On Thu, Oct 04, 2018 at 08:29:50PM -0400, Lyude Paul wrote:
With the exception of modesets which would switch the DPMS state of a connector from on to off, we want to make sure that we disallow all modesets which would result in enabling a new monitor or a new mode configuration on a monitor if the connector for the display in question is no longer registered. This allows us to stop userspace from trying to enable new displays on connectors for an MST topology that were just removed from the system, without preventing userspace from disabling DPMS on those connectors.
Signed-off-by: Lyude Paul lyude@redhat.com Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter daniel.vetter@ffwll.ch
drivers/gpu/drm/drm_atomic_helper.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 80be74df7ba6..ce2decfc6826 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -307,6 +307,26 @@ update_connector_routing(struct drm_atomic_state *state, return 0; }
- crtc_state = drm_atomic_get_new_crtc_state(state,
new_connector_state->crtc);
- /*
* For compatibility with legacy users, we want to make sure that
* we allow DPMS On->Off modesets on unregistered connectors. Modesets
* which would result in anything else must be considered invalid, to
* avoid turning on new displays on dead connectors.
*
* Since the connector can be unregistered at any point during an
* atomic check or commit, this is racy. But that's OK: all we care
* about is ensuring that userspace can't do anything but shut off the
* display on a connector that was destroyed after it's been notified,
* not before.
*/
- if (!READ_ONCE(connector->registered) && crtc_state->active) {
DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] is not registered\n",
connector->base.id, connector->name);
return -EINVAL;
- }
- funcs = connector->helper_private;
if (funcs->atomic_best_encoder) @@ -351,7 +371,6 @@ update_connector_routing(struct drm_atomic_state *state, set_best_encoder(state, new_connector_state, new_encoder);
- crtc_state = drm_atomic_get_new_crtc_state(state, new_connector_state->crtc); crtc_state->connectors_changed = true;
DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] using [ENCODER:%d:%s] on [CRTC:%d:%s]\n", -- 2.17.1
linux-stable-mirror@lists.linaro.org