Arg0 for qxp lpcg should be indices. Many nodes use index as lpcg's arg0. These patch fix this problem.
Signed-off-by: Frank Li Frank.Li@nxp.com --- Frank Li (7): arm64: dts: imx8-ss-lsio: fix pwm lpcg indices arm64: dts: imx8-ss-conn: fix usb lpcg indices arm64: dts: imx8-ss-dma: fix spi lpcg indices arm64: dts: imx8-ss-dma: fix pwm lpcg indices arm64: dts: imx8-ss-dma: fix adc lpcg indices arm64: dts: imx8-ss-dma: fix can lpcg indices arm64: dts: imx8qm-ss-dma: fix can lpcg indices
arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 4 +-- arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 40 ++++++++++++------------ arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi | 16 +++++----- arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi | 8 ++--- 4 files changed, 34 insertions(+), 34 deletions(-) --- base-commit: 8d04a7e2ee3fd6aabb8096b00c64db0d735bc874 change-id: 20240401-dts_fix-5b574f831918
Best regards, --- Frank Li Frank.Li@nxp.com
lpcg's arg0 should use clock indices instead of index.
pwm0_lpcg: clock-controller@5d400000 { ... // Col1 Col2 clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 0 0 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 1 1 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 2 4 <&lsio_bus_clk>, // 3 5 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; // 4 6 clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_6>; };
Col1: index, which exited dts try to get. Col2: actual index in lpcg driver.
pwm1 { .... clocks = <&pwm1_lpcg 4>, <&pwm1_lpcg 1>; ^^ ^^ should be:
clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>, <&pwm1_lpcg IMX_LPCG_CLK_1>; };
Arg0 is divided by 4 in lpcg driver, so index 0 and 1 will be get by pwm driver, which are same as IMX_LPCG_CLK_6 and IMX_LPCG_CLK_1. Even it can work, but code logic is wrong. Fixed it by use correct indices.
Cc: stable@vger.kernel.org Fixes: 23fa99b205ea ("arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3") Signed-off-by: Frank Li Frank.Li@nxp.com --- arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi index 7e510b21bbac5..764c1a08e3b11 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi @@ -25,8 +25,8 @@ lsio_pwm0: pwm@5d000000 { compatible = "fsl,imx27-pwm"; reg = <0x5d000000 0x10000>; clock-names = "ipg", "per"; - clocks = <&pwm0_lpcg 4>, - <&pwm0_lpcg 1>; + clocks = <&pwm0_lpcg IMX_LPCG_CLK_6>, + <&pwm0_lpcg IMX_LPCG_CLK_1>; assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; #pwm-cells = <3>; @@ -38,8 +38,8 @@ lsio_pwm1: pwm@5d010000 { compatible = "fsl,imx27-pwm"; reg = <0x5d010000 0x10000>; clock-names = "ipg", "per"; - clocks = <&pwm1_lpcg 4>, - <&pwm1_lpcg 1>; + clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>, + <&pwm1_lpcg IMX_LPCG_CLK_1>; assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; #pwm-cells = <3>; @@ -51,8 +51,8 @@ lsio_pwm2: pwm@5d020000 { compatible = "fsl,imx27-pwm"; reg = <0x5d020000 0x10000>; clock-names = "ipg", "per"; - clocks = <&pwm2_lpcg 4>, - <&pwm2_lpcg 1>; + clocks = <&pwm2_lpcg IMX_LPCG_CLK_6>, + <&pwm2_lpcg IMX_LPCG_CLK_1>; assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; #pwm-cells = <3>; @@ -64,8 +64,8 @@ lsio_pwm3: pwm@5d030000 { compatible = "fsl,imx27-pwm"; reg = <0x5d030000 0x10000>; clock-names = "ipg", "per"; - clocks = <&pwm3_lpcg 4>, - <&pwm3_lpcg 1>; + clocks = <&pwm3_lpcg IMX_LPCG_CLK_6>, + <&pwm3_lpcg IMX_LPCG_CLK_1>; assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; #pwm-cells = <3>;
On Mon, Apr 1, 2024 at 7:25 PM Frank Li Frank.Li@nxp.com wrote:
lpcg's arg0 should use clock indices instead of index.
pwm0_lpcg: clock-controller@5d400000 { ... // Col1 Col2 clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 0 0 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 1 1 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 2 4 <&lsio_bus_clk>, // 3 5 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; // 4 6 clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_6>; };
Col1: index, which exited dts try to get.
I cannot understand this sentence, sorry.
Col2: actual index in lpcg driver.
You should not describe DT in terms of Linux driver.
On Mon, Apr 01, 2024 at 08:04:56PM -0300, Fabio Estevam wrote:
On Mon, Apr 1, 2024 at 7:25 PM Frank Li Frank.Li@nxp.com wrote:
lpcg's arg0 should use clock indices instead of index.
pwm0_lpcg: clock-controller@5d400000 { ... // Col1 Col2 clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 0 0 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 1 1 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 2 4 <&lsio_bus_clk>, // 3 5 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; // 4 6 clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_6>; };
Col1: index, which exited dts try to get.
I cannot understand this sentence, sorry.
This base on downstream dts code. Downstream code use index in 'Col1' to get clock.
For example: <&pwm0_lpcg 3> means &lsio_bus_clk.
When someone do upstream, miss understand or omit upsteam lpcg driver's difference between downstream and upstream version. And it also work even index is wrong.
I realize this problem when I try to enable audio device for qm. The difference cause audio can't work. The grep lpcg [0-9] to find this problem.
Col2: actual index in lpcg driver.
You should not describe DT in terms of Linux driver.
It just descript the actual hehavior in current drivers to explain why it can work even arg0 is wrong.
for example: <&pwm0_lpcg 4>, developer intent to get <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; // 4 6
but lpcg driver device device arg0 (4) by 4, get 1. So below clock return <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 1 1
Both it is IMX_SC_PM_CLK_PER, so pwm works luckly.
But correct code should be <&pwm0_lpcg IMX_LPCG_CLK_6>.
Frank
On Tue, Apr 02, 2024 at 11:09:17AM -0400, Frank Li wrote:
On Mon, Apr 01, 2024 at 08:04:56PM -0300, Fabio Estevam wrote:
On Mon, Apr 1, 2024 at 7:25 PM Frank Li Frank.Li@nxp.com wrote:
lpcg's arg0 should use clock indices instead of index.
pwm0_lpcg: clock-controller@5d400000 { ... // Col1 Col2 clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 0 0 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 1 1 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 2 4 <&lsio_bus_clk>, // 3 5 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; // 4 6 clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_6>; };
Col1: index, which exited dts try to get.
I cannot understand this sentence, sorry.
This base on downstream dts code. Downstream code use index in 'Col1' to get clock.
So s/exited/existing you meant?
Shawn
On Wed, Apr 03, 2024 at 09:41:26AM +0800, Shawn Guo wrote:
On Tue, Apr 02, 2024 at 11:09:17AM -0400, Frank Li wrote:
On Mon, Apr 01, 2024 at 08:04:56PM -0300, Fabio Estevam wrote:
On Mon, Apr 1, 2024 at 7:25 PM Frank Li Frank.Li@nxp.com wrote:
lpcg's arg0 should use clock indices instead of index.
pwm0_lpcg: clock-controller@5d400000 { ... // Col1 Col2 clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 0 0 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 1 1 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 2 4 <&lsio_bus_clk>, // 3 5 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; // 4 6 clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_6>; };
Col1: index, which exited dts try to get.
I cannot understand this sentence, sorry.
This base on downstream dts code. Downstream code use index in 'Col1' to get clock.
So s/exited/existing you meant?
Yes, sorry for typo.
Frank
Shawn
On Tue, Apr 02, 2024 at 11:10:07PM -0400, Frank Li wrote:
On Wed, Apr 03, 2024 at 09:41:26AM +0800, Shawn Guo wrote:
On Tue, Apr 02, 2024 at 11:09:17AM -0400, Frank Li wrote:
On Mon, Apr 01, 2024 at 08:04:56PM -0300, Fabio Estevam wrote:
On Mon, Apr 1, 2024 at 7:25 PM Frank Li Frank.Li@nxp.com wrote:
lpcg's arg0 should use clock indices instead of index.
pwm0_lpcg: clock-controller@5d400000 { ... // Col1 Col2 clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 0 0 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 1 1 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 2 4 <&lsio_bus_clk>, // 3 5 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; // 4 6 clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_6>; };
Col1: index, which exited dts try to get.
I cannot understand this sentence, sorry.
This base on downstream dts code. Downstream code use index in 'Col1' to get clock.
So s/exited/existing you meant?
Yes, sorry for typo.
I fixed the typo and applied the series, thanks!
Shawn
usb2_lpcg: clock-controller@5b270000 { ... Col1 Col2 clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6 clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7 ... };
Col1: index, which exited dts try to get. Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 { ... clocks = <&usb2_lpcg 0>; ^^ Should be: clocks = <&usb2_lpcg IMX_LPCG_CLK_6>; };
usbphy1: usbphy@5b100000 { clocks = <&usb2_lpcg 1>; ^^ SHould be: clocks = <&usb2_lpcg IMX_LPCG_CLK_7>; };
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it by use correct clock indices.
Cc: stable@vger.kernel.org Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support") Signed-off-by: Frank Li Frank.Li@nxp.com --- arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index 3c42240e78e24..d862d2285d208 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -41,7 +41,7 @@ usbotg1: usb@5b0d0000 { interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc1 0>; - clocks = <&usb2_lpcg 0>; + clocks = <&usb2_lpcg IMX_LPCG_CLK_6>; ahb-burst-config = <0x0>; tx-burst-size-dword = <0x10>; rx-burst-size-dword = <0x10>; @@ -58,7 +58,7 @@ usbmisc1: usbmisc@5b0d0200 { usbphy1: usbphy@5b100000 { compatible = "fsl,imx7ulp-usbphy"; reg = <0x5b100000 0x1000>; - clocks = <&usb2_lpcg 1>; + clocks = <&usb2_lpcg IMX_LPCG_CLK_7>; power-domains = <&pd IMX_SC_R_USB_0_PHY>; status = "disabled"; };
spi0_lpcg: clock-controller@5a400000 { ... Col0 Col1 clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>,// 0 1 <&dma_ipg_clk>; // 1 4 clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; };
Col1: index, which exited dts try to get. Col2: actual index in lpcg driver.
lpspi0: spi@5a000000 { ... clocks = <&spi0_lpcg 0>, <&spi0_lpcg 1>; ^ ^ Should be: clocks = <&spi0_lpcg IMX_LPCG_CLK_0>, <&spi0_lpcg IMX_LPCG_CLK_4>; };
Arg0 is divided by 4 in lpcg driver. <&spi0_lpcg 0> and <&spi0_lpcg 1> are IMX_SC_PM_CLK_PER. Although code can work, code logic is wrong. It should use IMX_LPCG_CLK_0 and IMX_LPCG_CLK_4 for lpcg arg0.
Cc: stable@vger.kernel.org Fixes: c4098885e790 ("arm64: dts: imx8dxl: add lpspi support") Signed-off-by: Frank Li Frank.Li@nxp.com --- arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index b0bb77150adcc..a124d6598406d 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -27,8 +27,8 @@ lpspi0: spi@5a000000 { #size-cells = <0>; interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&spi0_lpcg 0>, - <&spi0_lpcg 1>; + clocks = <&spi0_lpcg IMX_LPCG_CLK_0>, + <&spi0_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; @@ -43,8 +43,8 @@ lpspi1: spi@5a010000 { #size-cells = <0>; interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&spi1_lpcg 0>, - <&spi1_lpcg 1>; + clocks = <&spi1_lpcg IMX_LPCG_CLK_0>, + <&spi1_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; @@ -59,8 +59,8 @@ lpspi2: spi@5a020000 { #size-cells = <0>; interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&spi2_lpcg 0>, - <&spi2_lpcg 1>; + clocks = <&spi2_lpcg IMX_LPCG_CLK_0>, + <&spi2_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; @@ -75,8 +75,8 @@ lpspi3: spi@5a030000 { #size-cells = <0>; interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&spi3_lpcg 0>, - <&spi3_lpcg 1>; + clocks = <&spi3_lpcg IMX_LPCG_CLK_0>, + <&spi3_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>;
adma_pwm_lpcg: clock-controller@5a590000 { ... col1 col2 clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>,// 0 0 <&dma_ipg_clk>; // 1 4 clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; ... };
Col1: index, which exited dts try to get. Col2: actual index in lpcg driver.
adma_pwm: pwm@5a190000 { ... clocks = <&adma_pwm_lpcg 1>, <&adma_pwm_lpcg 0>; ^^ ^^ Should be clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>, <&adma_pwm_lpcg IMX_LPCG_CLK_0>; };
Arg0 will be divided by 4 in lcpg driver, so pwm will get IMX_SC_PM_CLK_PER by <&adma_pwm_lpcg 1>, <&adma_pwm_lpcg 0>. Although function can work, code logic is wrong. Fix it by use correct indices.
Cc: stable@vger.kernel.org Fixes: f1d6a6b991ef ("arm64: dts: imx8qxp: add adma_pwm in adma") Signed-off-by: Frank Li Frank.Li@nxp.com --- arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index a124d6598406d..d4637037ba1b6 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -144,8 +144,8 @@ adma_pwm: pwm@5a190000 { compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm"; reg = <0x5a190000 0x1000>; interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_pwm_lpcg 1>, - <&adma_pwm_lpcg 0>; + clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>, + <&adma_pwm_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "per"; assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>;
adc0_lpcg: clock-controller@5ac80000 { ... Col1 Col2 clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>, // 0 0 <&dma_ipg_clk>; // 1 4 clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; };
Col1: index, which exited dts try to get. Col2: actual index in lpcg driver.
adc0: adc@5a880000 { clocks = <&adc0_lpcg 0>, <&adc0_lpcg 1>; ^^ ^^ clocks = <&adc0_lpcg IMX_LPCG_CLK_0>, <&adc0_lpcg IMX_LPCG_CLK_4>;
Arg0 is divided by 4 in lpcg driver. So adc get IMX_SC_PM_CLK_PER by <&adc0_lpcg 0>, <&adc0_lpcg 1>. Although function can work, code logic is wrong. Fix it by using correct indices.
Cc: stable@vger.kernel.org Fixes: 1db044b25d2e ("arm64: dts: imx8dxl: add adc0 support") Signed-off-by: Frank Li Frank.Li@nxp.com --- arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index d4637037ba1b6..77ba2dd6847b4 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -377,8 +377,8 @@ adc0: adc@5a880000 { reg = <0x5a880000 0x10000>; interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&adc0_lpcg 0>, - <&adc0_lpcg 1>; + clocks = <&adc0_lpcg IMX_LPCG_CLK_0>, + <&adc0_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; @@ -392,8 +392,8 @@ adc1: adc@5a890000 { reg = <0x5a890000 0x10000>; interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&adc1_lpcg 0>, - <&adc1_lpcg 1>; + clocks = <&adc1_lpcg IMX_LPCG_CLK_0>, + <&adc1_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>;
can0_lpcg: clock-controller@5acd0000 { ... Col1 Col2 clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>, // 0 0 <&dma_ipg_clk>, // 1 4 <&dma_ipg_clk>; // 2 5 clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; }
Col1: index, which exited dts try to get. Col2: actual index in lpcg driver.
flexcan1: can@5a8d0000 { clocks = <&can0_lpcg 1>, <&can0_lpcg 0>; ^^ ^^ Should be: clocks = <&can0_lpcg IMX_LPCG_CLK_4>, <&can0_lpcg IMX_LPCG_CLK_0>; };
Arg0 is divided by 4 in lpcg driver. flexcan driver get IMX_SC_PM_CLK_PER by <&can0_lpcg 1> and <&can0_lpcg 0>. Although function can work, code logic is wrong. Fix it by using correct clock indices.
Cc: stable@vger.kernel.org Fixes: 5e7d5b023e03 ("arm64: dts: imx8qxp: add flexcan in adma") Signed-off-by: Frank Li Frank.Li@nxp.com --- arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index 77ba2dd6847b4..67b3c7573233a 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -406,8 +406,8 @@ flexcan1: can@5a8d0000 { reg = <0x5a8d0000 0x10000>; interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&can0_lpcg 1>, - <&can0_lpcg 0>; + clocks = <&can0_lpcg IMX_LPCG_CLK_4>, + <&can0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "per"; assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <40000000>; @@ -427,8 +427,8 @@ flexcan2: can@5a8e0000 { * CAN1 shares CAN0's clock and to enable CAN0's clock it * has to be powered on. */ - clocks = <&can0_lpcg 1>, - <&can0_lpcg 0>; + clocks = <&can0_lpcg IMX_LPCG_CLK_4>, + <&can0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "per"; assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <40000000>; @@ -448,8 +448,8 @@ flexcan3: can@5a8f0000 { * CAN2 shares CAN0's clock and to enable CAN0's clock it * has to be powered on. */ - clocks = <&can0_lpcg 1>, - <&can0_lpcg 0>; + clocks = <&can0_lpcg IMX_LPCG_CLK_4>, + <&can0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "per"; assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <40000000>;
can1_lpcg: clock-controller@5ace0000 { ... Col1 Col2 clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>,// 0 0 <&dma_ipg_clk>, // 1 4 <&dma_ipg_clk>; // 2 5 clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; };
Col1: index, which exited dts try to get. Col2: actual index in lpcg driver
&flexcan2 { clocks = <&can1_lpcg 1>, <&can1_lpcg 0>; ^^ ^^ Should be: clocks = <&can1_lpcg IMX_LPCG_CLK_4>, <&can1_lpcg IMX_LPCG_CLK_0>; };
Arg0 is divided by 4 in lpcg driver. So flexcan get IMX_SC_PM_CLK_PER by <&can1_lpcg 1> and <&can1_lpcg 0>. Although function work, code logic is wrong. Fix it by using correct clock indices.
Cc: stable@vger.kernel.org Fixes: be85831de020 ("arm64: dts: imx8qm: add can node in devicetree") Signed-off-by: Frank Li Frank.Li@nxp.com --- arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi index 69cb8676732ea..475702947afff 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi @@ -112,15 +112,15 @@ &flexcan1 { };
&flexcan2 { - clocks = <&can1_lpcg 1>, - <&can1_lpcg 0>; + clocks = <&can1_lpcg IMX_LPCG_CLK_4>, + <&can1_lpcg IMX_LPCG_CLK_0>; assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>; fsl,clk-source = /bits/ 8 <1>; };
&flexcan3 { - clocks = <&can2_lpcg 1>, - <&can2_lpcg 0>; + clocks = <&can2_lpcg IMX_LPCG_CLK_4>, + <&can2_lpcg IMX_LPCG_CLK_0>; assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>; fsl,clk-source = /bits/ 8 <1>; };
linux-stable-mirror@lists.linaro.org
-
Fabio Estevam -
Frank Li -
Frank Li
-
Shawn Guo