The writes to setipnum_le/be register for APLIC in MSI-mode have special consideration for level-triggered interrupts as-per the section "4.9.2 Special consideration for level-sensitive interrupt sources" of the RISC-V AIA specification.

Particularly, the below text from the RISC-V AIA specification defines the behaviour of writes to setipnum_le/be register for level-triggered interrupts:

"A second option is for the interrupt service routine to write the APLIC’s source identity number for the interrupt to the domain’s setipnum register just before exiting. This will cause the interrupt’s pending bit to be set to one again if the source is still asserting an interrupt, but not if the source is not asserting an interrupt."

Fix setipnum_le/be write emulation for in-kernel APLIC by implementing the above behaviour in aplic_write_pending() function.

Cc: stable@vger.kernel.org Fixes: 74967aa208e2 ("RISC-V: KVM: Add in-kernel emulation of AIA APLIC") Signed-off-by: Anup Patel apatel@ventanamicro.com --- arch/riscv/kvm/aia_aplic.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/kvm/aia_aplic.c b/arch/riscv/kvm/aia_aplic.c index 39e72aa016a4..5e842b92dc46 100644 --- a/arch/riscv/kvm/aia_aplic.c +++ b/arch/riscv/kvm/aia_aplic.c @@ -137,11 +137,21 @@ static void aplic_write_pending(struct aplic *aplic, u32 irq, bool pending) raw_spin_lock_irqsave(&irqd->lock, flags);

sm = irqd->sourcecfg & APLIC_SOURCECFG_SM_MASK; - if (!pending && - ((sm == APLIC_SOURCECFG_SM_LEVEL_HIGH) || - (sm == APLIC_SOURCECFG_SM_LEVEL_LOW))) + if (sm == APLIC_SOURCECFG_SM_INACTIVE) goto skip_write_pending;

+ if (sm == APLIC_SOURCECFG_SM_LEVEL_HIGH || + sm == APLIC_SOURCECFG_SM_LEVEL_LOW) { + if (!pending) + goto skip_write_pending; + if ((irqd->state & APLIC_IRQ_STATE_INPUT) && + sm == APLIC_SOURCECFG_SM_LEVEL_LOW) + goto skip_write_pending; + if (!(irqd->state & APLIC_IRQ_STATE_INPUT) && + sm == APLIC_SOURCECFG_SM_LEVEL_HIGH) + goto skip_write_pending; + } + if (pending) irqd->state |= APLIC_IRQ_STATE_PENDING; else