This is the start of the stable review cycle for the 5.10.152 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun, 30 Oct 2022 12:02:13 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.152-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.10.152-rc1
Seth Jenkins sethjenkins@google.com mm: /proc/pid/smaps_rollup: fix no vma's null-deref
Yu Kuai yukuai3@huawei.com blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()
Avri Altman avri.altman@wdc.com mmc: core: Add SD card quirk for broken discard
Nick Desaulniers ndesaulniers@google.com Makefile.debug: re-enable debug info for .S files
Nathan Chancellor nathan@kernel.org x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB
Werner Sembach wse@tuxedocomputers.com ACPI: video: Force backlight native for more TongFang devices
Gaurav Kohli gauravkohli@linux.microsoft.com hv_netvsc: Fix race between VF offering and VF association message from host
Adrian Hunter adrian.hunter@intel.com perf/x86/intel/pt: Relax address filter validation
Conor Dooley conor.dooley@microchip.com riscv: topology: fix default topology reporting
Conor Dooley conor.dooley@microchip.com arm64: topology: move store_cpu_topology() to shared code
Sibi Sankar sibis@codeaurora.org arm64: dts: qcom: sc7180-trogdor: Fixup modem memory region
Desmond Cheong Zhi Xi desmondcheongzx@gmail.com fcntl: fix potential deadlocks for &fown_struct.lock
Pavel Tikhomirov ptikhomirov@virtuozzo.com fcntl: make F_GETOWN(EX) return 0 on dead owner task
Rob Herring robh@kernel.org perf: Skip and warn on unknown format 'configN' attrs
Jin Yao yao.jin@linux.intel.com perf pmu: Validate raw event with sysfs exported format bits
Wenting Zhang zephray@outlook.com riscv: always honor the CONFIG_CMDLINE_FORCE when parsing dtb
Kefeng Wang wangkefeng.wang@huawei.com riscv: Add machine name to kernel boot log and stack dump output
Prathamesh Shete pshete@nvidia.com mmc: sdhci-tegra: Use actual clock rate for SW tuning correction
M. Vefa Bicakci m.v.b@runbox.com xen/gntdev: Accommodate VMA splitting
Juergen Gross jgross@suse.com xen: assume XENFEAT_gnttab_map_avail_bits being set for pv guests
Steven Rostedt (Google) rostedt@goodmis.org tracing: Do not free snapshot if tracer is on cmdline
sunliming sunliming@kylinos.cn tracing: Simplify conditional compilation code in tracing_set_tracer()
Dario Binacchi dario.binacchi@amarulasolutions.com dmaengine: mxs: use platform_driver_register
Fabio Estevam festevam@gmail.com dmaengine: mxs-dma: Remove the unused .id_table
Dmitry Osipenko dmitry.osipenko@collabora.com drm/virtio: Use appropriate atomic state in virtio_gpu_plane_cleanup_fb()
Jerry Snitselaar jsnitsel@redhat.com iommu/vt-d: Clean up si_domain in the init_dmars() error path
Charlotte Tan charlotte@extrahop.com iommu/vt-d: Allow NVS regions in arch_rmrr_sanity_check()
Felix Riemann felix.riemann@sma.de net: phy: dp83822: disable MDI crossover status change interrupt
Eric Dumazet edumazet@google.com net: sched: fix race condition in qdisc_graft()
Yang Yingliang yangyingliang@huawei.com net: hns: fix possible memory leak in hnae_ae_register()
Pieter Jansen van Vuuren pieter.jansen-van-vuuren@amd.com sfc: include vport_id in filter spec hash and equal()
Zhengchao Shao shaozhengchao@huawei.com net: sched: sfb: fix null pointer access issue when sfb_init() fails
Zhengchao Shao shaozhengchao@huawei.com net: sched: delete duplicate cleanup of backlog and qlen
Zhengchao Shao shaozhengchao@huawei.com net: sched: cake: fix null pointer access issue when cake_init() fails
Serge Semin Sergey.Semin@baikalelectronics.ru nvme-hwmon: kmalloc the NVME SMART log buffer
Christoph Hellwig hch@lst.de nvme-hwmon: consistently ignore errors from nvme_hwmon_init
Daniel Wagner dwagner@suse.de nvme-hwmon: Return error code when registration fails
Hannes Reinecke hare@suse.de nvme-hwmon: rework to avoid devm allocation
Brett Creeley brett@pensando.io ionic: catch NULL pointer issue on reconfig
Eric Dumazet edumazet@google.com net: hsr: avoid possible NULL deref in skb_clone()
Zhang Xiaoxu zhangxiaoxu5@huawei.com cifs: Fix xid leak in cifs_ses_add_channel()
Zhang Xiaoxu zhangxiaoxu5@huawei.com cifs: Fix xid leak in cifs_flock()
Zhang Xiaoxu zhangxiaoxu5@huawei.com cifs: Fix xid leak in cifs_copy_file_range()
Kuniyuki Iwashima kuniyu@amazon.com udp: Update reuse->has_conns under reuseport_lock.
Kuniyuki Iwashima kuniyu@amazon.co.jp tcp: Add num_closed_socks to struct sock_reuseport.
Harini Katakam harini.katakam@amd.com net: phy: dp83867: Extend RX strap quirk for SGMII mode
Xiaobo Liu cppcoffee@gmail.com net/atm: fix proc_mpc_write incorrect return value
Jonathan Cooper jonathan.s.cooper@amd.com sfc: Change VF mac via PF as first preference if available.
José Expósito jose.exposito89@gmail.com HID: magicmouse: Do not set BTN_MOUSE on double report
Jan Sokolowski jan.sokolowski@intel.com i40e: Fix DMA mappings leak
Alexander Potapenko glider@google.com tipc: fix an information leak in tipc_topsrv_kern_subscr
Mark Tomlinson mark.tomlinson@alliedtelesis.co.nz tipc: Fix recognition of trial period
Tony Luck tony.luck@intel.com ACPI: extlog: Handle multiple records
Filipe Manana fdmanana@suse.com btrfs: fix processing of delayed tree block refs during backref walking
Filipe Manana fdmanana@suse.com btrfs: fix processing of delayed data refs during backref walking
Jean-Francois Le Fillatre jflf_kernel@gmx.com r8152: add PID for the Lenovo OneLink+ Dock
James Morse james.morse@arm.com arm64: errata: Remove AES hwcap for COMPAT tasks
Yu Kuai yukuai3@huawei.com blk-wbt: call rq_qos_add() after wb_normal is initialized
Lei Chen lennychen@tencent.com block: wbt: Remove unnecessary invoking of wbt_update_limits in wbt_init
Bryan O'Donoghue bryan.odonoghue@linaro.org media: venus: dec: Handle the case where find_format fails
Sean Young sean@mess.org media: mceusb: set timeout to at least timeout provided
Eric Ren renzhengeek@gmail.com KVM: arm64: vgic: Fix exit condition in scan_its_table()
Alexander Graf graf@amazon.com kvm: Add support for arch compat vm ioctls
Fabien Parent fabien.parent@linaro.org cpufreq: qcom: fix memory leak in error path
Kai-Heng Feng kai.heng.feng@canonical.com ata: ahci: Match EM_MAX_SLOTS with SATA_PMP_MAX_PORTS
Alexander Stein alexander.stein@ew.tq-group.com ata: ahci-imx: Fix MODULE_ALIAS
Zhang Rui rui.zhang@intel.com hwmon/coretemp: Handle large core ID value
Borislav Petkov bp@suse.de x86/microcode/AMD: Apply the patch early on every logical thread
Bryan O'Donoghue bryan.odonoghue@linaro.org i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter
Fabien Parent fabien.parent@linaro.org cpufreq: qcom: fix writes in read-only memory region
GONG, Ruiqi gongruiqi1@huawei.com selinux: enable use of both GFP_KERNEL and GFP_ATOMIC in convert_context()
Joseph Qi joseph.qi@linux.alibaba.com ocfs2: fix BUG when iput after ocfs2_mknod fails
Joseph Qi joseph.qi@linux.alibaba.com ocfs2: clear dinode links count in case of error
-------------
Diffstat:
Documentation/arm64/silicon-errata.rst | 4 + Makefile | 8 +- arch/arm64/Kconfig | 16 ++++ .../boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi | 4 + arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +- arch/arm64/include/asm/cpucaps.h | 3 +- arch/arm64/kernel/cpu_errata.c | 16 ++++ arch/arm64/kernel/cpufeature.c | 13 ++- arch/arm64/kernel/topology.c | 40 --------- arch/arm64/kvm/vgic/vgic-its.c | 5 +- arch/riscv/Kconfig | 2 +- arch/riscv/kernel/setup.c | 13 ++- arch/riscv/kernel/smpboot.c | 4 +- arch/x86/Kconfig | 1 - arch/x86/events/intel/pt.c | 63 ++++++++++++--- arch/x86/include/asm/iommu.h | 4 +- arch/x86/kernel/cpu/microcode/amd.c | 16 +++- block/blk-wbt.c | 11 +-- drivers/acpi/acpi_extlog.c | 33 +++++--- drivers/acpi/video_detect.c | 64 +++++++++++++++ drivers/ata/ahci.h | 2 +- drivers/ata/ahci_imx.c | 2 +- drivers/base/arch_topology.c | 19 +++++ drivers/cpufreq/qcom-cpufreq-nvmem.c | 10 ++- drivers/dma/mxs-dma.c | 48 +++-------- drivers/gpu/drm/virtio/virtgpu_plane.c | 6 +- drivers/hid/hid-magicmouse.c | 2 +- drivers/hwmon/coretemp.c | 56 +++++++++---- drivers/i2c/busses/i2c-qcom-cci.c | 13 +-- drivers/iommu/intel/iommu.c | 5 ++ drivers/media/platform/qcom/venus/vdec.c | 2 + drivers/media/rc/mceusb.c | 2 +- drivers/mmc/core/block.c | 7 +- drivers/mmc/core/card.h | 6 ++ drivers/mmc/core/quirks.h | 6 ++ drivers/mmc/host/sdhci-tegra.c | 2 +- drivers/net/ethernet/hisilicon/hns/hnae.c | 4 +- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 3 - drivers/net/ethernet/intel/i40e/i40e_main.c | 16 ++-- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 13 ++- drivers/net/ethernet/intel/i40e/i40e_txrx.h | 1 - drivers/net/ethernet/intel/i40e/i40e_xsk.c | 67 +++++++++++++-- drivers/net/ethernet/intel/i40e/i40e_xsk.h | 2 +- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 12 ++- drivers/net/ethernet/sfc/ef10.c | 58 ++++++------- drivers/net/ethernet/sfc/filter.h | 3 +- drivers/net/ethernet/sfc/rx_common.c | 10 +-- drivers/net/hyperv/hyperv_net.h | 3 +- drivers/net/hyperv/netvsc.c | 4 + drivers/net/hyperv/netvsc_drv.c | 20 +++++ drivers/net/phy/dp83822.c | 3 +- drivers/net/phy/dp83867.c | 8 ++ drivers/net/usb/cdc_ether.c | 7 ++ drivers/net/usb/r8152.c | 1 + drivers/nvme/host/core.c | 7 +- drivers/nvme/host/hwmon.c | 58 +++++++++---- drivers/nvme/host/nvme.h | 8 ++ drivers/xen/gntdev-common.h | 3 +- drivers/xen/gntdev.c | 94 +++++++--------------- fs/btrfs/backref.c | 46 +++++++---- fs/cifs/cifsfs.c | 7 +- fs/cifs/file.c | 11 ++- fs/cifs/sess.c | 1 + fs/fcntl.c | 32 +++++--- fs/ocfs2/namei.c | 23 +++--- fs/proc/task_mmu.c | 2 +- include/linux/kvm_host.h | 2 + include/linux/mmc/card.h | 1 + include/net/sch_generic.h | 1 - include/net/sock_reuseport.h | 16 ++-- kernel/trace/trace.c | 12 +-- net/atm/mpoa_proc.c | 3 +- net/core/sock_reuseport.c | 91 ++++++++++++++++----- net/hsr/hsr_forward.c | 12 +-- net/ipv4/datagram.c | 2 +- net/ipv4/udp.c | 2 +- net/ipv6/datagram.c | 2 +- net/ipv6/udp.c | 2 +- net/sched/sch_api.c | 5 +- net/sched/sch_atm.c | 1 - net/sched/sch_cake.c | 4 + net/sched/sch_cbq.c | 1 - net/sched/sch_choke.c | 2 - net/sched/sch_drr.c | 2 - net/sched/sch_dsmark.c | 2 - net/sched/sch_etf.c | 3 - net/sched/sch_ets.c | 2 - net/sched/sch_fq_codel.c | 2 - net/sched/sch_fq_pie.c | 3 - net/sched/sch_hfsc.c | 2 - net/sched/sch_htb.c | 2 - net/sched/sch_multiq.c | 1 - net/sched/sch_prio.c | 2 - net/sched/sch_qfq.c | 2 - net/sched/sch_red.c | 2 - net/sched/sch_sfb.c | 5 +- net/sched/sch_skbprio.c | 3 - net/sched/sch_taprio.c | 2 - net/sched/sch_tbf.c | 2 - net/sched/sch_teql.c | 1 - net/tipc/discover.c | 2 +- net/tipc/topsrv.c | 2 +- security/selinux/ss/services.c | 5 +- security/selinux/ss/sidtab.c | 4 +- security/selinux/ss/sidtab.h | 2 +- tools/perf/util/parse-events.c | 6 ++ tools/perf/util/pmu.c | 50 ++++++++++++ tools/perf/util/pmu.h | 5 ++ tools/perf/util/pmu.l | 2 - tools/perf/util/pmu.y | 15 +--- virt/kvm/kvm_main.c | 11 +++ 111 files changed, 863 insertions(+), 475 deletions(-)
From: Joseph Qi joseph.qi@linux.alibaba.com
commit 28f4821b1b53e0649706912e810c6c232fc506f9 upstream.
In ocfs2_mknod(), if error occurs after dinode successfully allocated, ocfs2 i_links_count will not be 0.
So even though we clear inode i_nlink before iput in error handling, it still won't wipe inode since we'll refresh inode from dinode during inode lock. So just like clear inode i_nlink, we clear ocfs2 i_links_count as well. Also do the same change for ocfs2_symlink().
Link: https://lkml.kernel.org/r/20221017130227.234480-2-joseph.qi@linux.alibaba.co... Signed-off-by: Joseph Qi joseph.qi@linux.alibaba.com Reported-by: Yan Wang wangyan122@huawei.com Cc: Mark Fasheh mark@fasheh.com Cc: Joel Becker jlbec@evilplan.org Cc: Junxiao Bi junxiao.bi@oracle.com Cc: Changwei Ge gechangwei@live.cn Cc: Gang He ghe@suse.com Cc: Jun Piao piaojun@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ocfs2/namei.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
--- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -231,6 +231,7 @@ static int ocfs2_mknod(struct inode *dir handle_t *handle = NULL; struct ocfs2_super *osb; struct ocfs2_dinode *dirfe; + struct ocfs2_dinode *fe = NULL; struct buffer_head *new_fe_bh = NULL; struct inode *inode = NULL; struct ocfs2_alloc_context *inode_ac = NULL; @@ -381,6 +382,7 @@ static int ocfs2_mknod(struct inode *dir goto leave; }
+ fe = (struct ocfs2_dinode *) new_fe_bh->b_data; if (S_ISDIR(mode)) { status = ocfs2_fill_new_dir(osb, handle, dir, inode, new_fe_bh, data_ac, meta_ac); @@ -453,8 +455,11 @@ roll_back: leave: if (status < 0 && did_quota_inode) dquot_free_inode(inode); - if (handle) + if (handle) { + if (status < 0 && fe) + ocfs2_set_links_count(fe, 0); ocfs2_commit_trans(osb, handle); + }
ocfs2_inode_unlock(dir, 1); if (did_block_signals) @@ -2023,8 +2028,11 @@ bail: ocfs2_clusters_to_bytes(osb->sb, 1)); if (status < 0 && did_quota_inode) dquot_free_inode(inode); - if (handle) + if (handle) { + if (status < 0 && fe) + ocfs2_set_links_count(fe, 0); ocfs2_commit_trans(osb, handle); + }
ocfs2_inode_unlock(dir, 1); if (did_block_signals)
From: Joseph Qi joseph.qi@linux.alibaba.com
commit 759a7c6126eef5635506453e9b9d55a6a3ac2084 upstream.
Commit b1529a41f777 "ocfs2: should reclaim the inode if '__ocfs2_mknod_locked' returns an error" tried to reclaim the claimed inode if __ocfs2_mknod_locked() fails later. But this introduce a race, the freed bit may be reused immediately by another thread, which will update dinode, e.g. i_generation. Then iput this inode will lead to BUG: inode->i_generation != le32_to_cpu(fe->i_generation)
We could make this inode as bad, but we did want to do operations like wipe in some cases. Since the claimed inode bit can only affect that an dinode is missing and will return back after fsck, it seems not a big problem. So just leave it as is by revert the reclaim logic.
Link: https://lkml.kernel.org/r/20221017130227.234480-1-joseph.qi@linux.alibaba.co... Fixes: b1529a41f777 ("ocfs2: should reclaim the inode if '__ocfs2_mknod_locked' returns an error") Signed-off-by: Joseph Qi joseph.qi@linux.alibaba.com Reported-by: Yan Wang wangyan122@huawei.com Cc: Mark Fasheh mark@fasheh.com Cc: Joel Becker jlbec@evilplan.org Cc: Junxiao Bi junxiao.bi@oracle.com Cc: Changwei Ge gechangwei@live.cn Cc: Gang He ghe@suse.com Cc: Jun Piao piaojun@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ocfs2/namei.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-)
--- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -636,18 +636,9 @@ static int ocfs2_mknod_locked(struct ocf return status; }
- status = __ocfs2_mknod_locked(dir, inode, dev, new_fe_bh, + return __ocfs2_mknod_locked(dir, inode, dev, new_fe_bh, parent_fe_bh, handle, inode_ac, fe_blkno, suballoc_loc, suballoc_bit); - if (status < 0) { - u64 bg_blkno = ocfs2_which_suballoc_group(fe_blkno, suballoc_bit); - int tmp = ocfs2_free_suballoc_bits(handle, inode_ac->ac_inode, - inode_ac->ac_bh, suballoc_bit, bg_blkno, 1); - if (tmp) - mlog_errno(tmp); - } - - return status; }
static int ocfs2_mkdir(struct inode *dir,
From: GONG, Ruiqi gongruiqi1@huawei.com
commit abe3c631447dcd1ba7af972fe6f054bee6f136fa upstream.
The following warning was triggered on a hardware environment:
SELinux: Converting 162 SID table entries... BUG: sleeping function called from invalid context at __might_sleep+0x60/0x74 0x0 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 5943, name: tar CPU: 7 PID: 5943 Comm: tar Tainted: P O 5.10.0 #1 Call trace: dump_backtrace+0x0/0x1c8 show_stack+0x18/0x28 dump_stack+0xe8/0x15c ___might_sleep+0x168/0x17c __might_sleep+0x60/0x74 __kmalloc_track_caller+0xa0/0x7dc kstrdup+0x54/0xac convert_context+0x48/0x2e4 sidtab_context_to_sid+0x1c4/0x36c security_context_to_sid_core+0x168/0x238 security_context_to_sid_default+0x14/0x24 inode_doinit_use_xattr+0x164/0x1e4 inode_doinit_with_dentry+0x1c0/0x488 selinux_d_instantiate+0x20/0x34 security_d_instantiate+0x70/0xbc d_splice_alias+0x4c/0x3c0 ext4_lookup+0x1d8/0x200 [ext4] __lookup_slow+0x12c/0x1e4 walk_component+0x100/0x200 path_lookupat+0x88/0x118 filename_lookup+0x98/0x130 user_path_at_empty+0x48/0x60 vfs_statx+0x84/0x140 vfs_fstatat+0x20/0x30 __se_sys_newfstatat+0x30/0x74 __arm64_sys_newfstatat+0x1c/0x2c el0_svc_common.constprop.0+0x100/0x184 do_el0_svc+0x1c/0x2c el0_svc+0x20/0x34 el0_sync_handler+0x80/0x17c el0_sync+0x13c/0x140 SELinux: Context system_u:object_r:pssp_rsyslog_log_t:s0:c0 is not valid (left unmapped).
It was found that within a critical section of spin_lock_irqsave in sidtab_context_to_sid(), convert_context() (hooked by sidtab_convert_params.func) might cause the process to sleep via allocating memory with GFP_KERNEL, which is problematic.
As Ondrej pointed out [1], convert_context()/sidtab_convert_params.func has another caller sidtab_convert_tree(), which is okay with GFP_KERNEL. Therefore, fix this problem by adding a gfp_t argument for convert_context()/sidtab_convert_params.func and pass GFP_KERNEL/_ATOMIC properly in individual callers.
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20221018120111.1474581-1-gongruiqi1@huawei.com/ [1] Reported-by: Tan Ninghao tanninghao1@huawei.com Fixes: ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance") Signed-off-by: GONG, Ruiqi gongruiqi1@huawei.com Reviewed-by: Ondrej Mosnacek omosnace@redhat.com [PM: wrap long BUG() output lines, tweak subject line] Signed-off-by: Paul Moore paul@paul-moore.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- security/selinux/ss/services.c | 5 +++-- security/selinux/ss/sidtab.c | 4 ++-- security/selinux/ss/sidtab.h | 2 +- 3 files changed, 6 insertions(+), 5 deletions(-)
--- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -2011,7 +2011,8 @@ static inline int convert_context_handle * in `newc'. Verify that the context is valid * under the new policy. */ -static int convert_context(struct context *oldc, struct context *newc, void *p) +static int convert_context(struct context *oldc, struct context *newc, void *p, + gfp_t gfp_flags) { struct convert_context_args *args; struct ocontext *oc; @@ -2025,7 +2026,7 @@ static int convert_context(struct contex args = p;
if (oldc->str) { - s = kstrdup(oldc->str, GFP_KERNEL); + s = kstrdup(oldc->str, gfp_flags); if (!s) return -ENOMEM;
--- a/security/selinux/ss/sidtab.c +++ b/security/selinux/ss/sidtab.c @@ -325,7 +325,7 @@ int sidtab_context_to_sid(struct sidtab }
rc = convert->func(context, &dst_convert->context, - convert->args); + convert->args, GFP_ATOMIC); if (rc) { context_destroy(&dst->context); goto out_unlock; @@ -404,7 +404,7 @@ static int sidtab_convert_tree(union sid while (i < SIDTAB_LEAF_ENTRIES && *pos < count) { rc = convert->func(&esrc->ptr_leaf->entries[i].context, &edst->ptr_leaf->entries[i].context, - convert->args); + convert->args, GFP_KERNEL); if (rc) return rc; (*pos)++; --- a/security/selinux/ss/sidtab.h +++ b/security/selinux/ss/sidtab.h @@ -65,7 +65,7 @@ struct sidtab_isid_entry { };
struct sidtab_convert_params { - int (*func)(struct context *oldc, struct context *newc, void *args); + int (*func)(struct context *oldc, struct context *newc, void *args, gfp_t gfp_flags); void *args; struct sidtab *target; };
From: Fabien Parent fabien.parent@linaro.org
commit 01039fb8e90c9cb684430414bff70cea9eb168c5 upstream.
This commit fixes a kernel oops because of a write in some read-only memory:
[ 9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8 ..snip.. [ 9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP ..snip.. [ 9.269161] Call trace: [ 9.276271] __memcpy+0x5c/0x230 [ 9.278531] snprintf+0x58/0x80 [ 9.282002] qcom_cpufreq_msm8939_name_version+0xb4/0x190 [ 9.284869] qcom_cpufreq_probe+0xc8/0x39c ..snip..
The following line defines a pointer that point to a char buffer stored in read-only memory:
char *pvs_name = "speedXX-pvsXX-vXX";
This pointer is meant to hold a template "speedXX-pvsXX-vXX" where the XX values get overridden by the qcom_cpufreq_krait_name_version function. Since the template is actually stored in read-only memory, when the function executes the following call we get an oops:
snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d", speed, pvs, pvs_ver);
To fix this issue, we instead store the template name onto the stack by using the following syntax:
char pvs_name_buffer[] = "speedXX-pvsXX-vXX";
Because the `pvs_name` needs to be able to be assigned to NULL, the template buffer is stored in the pvs_name_buffer and not under the pvs_name variable.
Cc: v5.7+ stable@vger.kernel.org # v5.7+ Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs") Signed-off-by: Fabien Parent fabien.parent@linaro.org Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/cpufreq/qcom-cpufreq-nvmem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c @@ -264,7 +264,8 @@ static int qcom_cpufreq_probe(struct pla struct nvmem_cell *speedbin_nvmem; struct device_node *np; struct device *cpu_dev; - char *pvs_name = "speedXX-pvsXX-vXX"; + char pvs_name_buffer[] = "speedXX-pvsXX-vXX"; + char *pvs_name = pvs_name_buffer; unsigned cpu; const struct of_device_id *match; int ret;
From: Bryan O'Donoghue bryan.odonoghue@linaro.org
commit 61775d54d674ff8ec3658495e0dbc537227dc5c1 upstream.
When we compile-in the CCI along with the imx412 driver and run on the RB5 we see that i2c_add_adapter() causes the probe of the imx412 driver to happen.
This probe tries to perform an i2c xfer() and the xfer() in i2c-qcom-cci.c fails on pm_runtime_get() because the i2c-qcom-cci.c::probe() function has not completed to pm_runtime_enable(dev).
Fix this sequence by ensuring pm_runtime_xxx() calls happen prior to adding the i2c adapter.
Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") Reported-by: Vladimir Zapolskiy vladimir.zapolskiy@linaro.org Reviewed-by: Vladimir Zapolskiy vladimir.zapolskiy@linaro.org Tested-by: Vladimir Zapolskiy vladimir.zapolskiy@linaro.org Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue bryan.odonoghue@linaro.org Reviewed-by: Robert Foss robert.foss@linaro.org Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/i2c/busses/i2c-qcom-cci.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/i2c/busses/i2c-qcom-cci.c +++ b/drivers/i2c/busses/i2c-qcom-cci.c @@ -638,6 +638,11 @@ static int cci_probe(struct platform_dev if (ret < 0) goto error;
+ pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); + pm_runtime_use_autosuspend(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + for (i = 0; i < cci->data->num_masters; i++) { if (!cci->master[i].cci) continue; @@ -649,14 +654,12 @@ static int cci_probe(struct platform_dev } }
- pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); - pm_runtime_use_autosuspend(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - return 0;
error_i2c: + pm_runtime_disable(dev); + pm_runtime_dont_use_autosuspend(dev); + for (--i ; i >= 0; i--) { if (cci->master[i].cci) { i2c_del_adapter(&cci->master[i].adap);
From: Borislav Petkov bp@suse.de
commit e7ad18d1169c62e6c78c01ff693fd362d9d65278 upstream.
Currently, the patch application logic checks whether the revision needs to be applied on each logical CPU (SMT thread). Therefore, on SMT designs where the microcode engine is shared between the two threads, the application happens only on one of them as that is enough to update the shared microcode engine.
However, there are microcode patches which do per-thread modification, see Link tag below.
Therefore, drop the revision check and try applying on each thread. This is what the BIOS does too so this method is very much tested.
Btw, change only the early paths. On the late loading paths, there's no point in doing per-thread modification because if is it some case like in the bugzilla below - removing a CPUID flag - the kernel cannot go and un-use features it has detected are there early. For that, one should use early loading anyway.
[ bp: Fixes does not contain the oldest commit which did check for equality but that is good enough. ]
Fixes: 8801b3fcb574 ("x86/microcode/AMD: Rework container parsing") Reported-by: Ștefan Talpalaru stefantalpalaru@yahoo.com Signed-off-by: Borislav Petkov bp@suse.de Tested-by: Ștefan Talpalaru stefantalpalaru@yahoo.com Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=216211 Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kernel/cpu/microcode/amd.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
--- a/arch/x86/kernel/cpu/microcode/amd.c +++ b/arch/x86/kernel/cpu/microcode/amd.c @@ -441,7 +441,13 @@ apply_microcode_early_amd(u32 cpuid_1_ea return ret;
native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy); - if (rev >= mc->hdr.patch_id) + + /* + * Allow application of the same revision to pick up SMT-specific + * changes even if the revision of the other SMT thread is already + * up-to-date. + */ + if (rev > mc->hdr.patch_id) return ret;
if (!__apply_microcode_amd(mc)) { @@ -523,8 +529,12 @@ void load_ucode_amd_ap(unsigned int cpui
native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
- /* Check whether we have saved a new patch already: */ - if (*new_rev && rev < mc->hdr.patch_id) { + /* + * Check whether a new patch has been saved already. Also, allow application of + * the same revision in order to pick up SMT-thread-specific configuration even + * if the sibling SMT thread already has an up-to-date revision. + */ + if (*new_rev && rev <= mc->hdr.patch_id) { if (!__apply_microcode_amd(mc)) { *new_rev = mc->hdr.patch_id; return;
From: Zhang Rui rui.zhang@intel.com
commit 7108b80a542b9d65e44b36d64a700a83658c0b73 upstream.
The coretemp driver supports up to a hard-coded limit of 128 cores.
Today, the driver can not support a core with an ID above that limit. Yet, the encoding of core ID's is arbitrary (BIOS APIC-ID) and so they may be sparse and they may be large.
Update the driver to map arbitrary core ID numbers into appropriate array indexes so that 128 cores can be supported, no matter the encoding of core ID's.
Signed-off-by: Zhang Rui rui.zhang@intel.com Signed-off-by: Dave Hansen dave.hansen@linux.intel.com Acked-by: Len Brown len.brown@intel.com Acked-by: Guenter Roeck linux@roeck-us.net Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20221014090147.1836-3-rui.zhang@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hwmon/coretemp.c | 56 ++++++++++++++++++++++++++++++++++------------- 1 file changed, 41 insertions(+), 15 deletions(-)
--- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -46,9 +46,6 @@ MODULE_PARM_DESC(tjmax, "TjMax value in #define TOTAL_ATTRS (MAX_CORE_ATTRS + 1) #define MAX_CORE_DATA (NUM_REAL_CORES + BASE_SYSFS_ATTR_NO)
-#define TO_CORE_ID(cpu) (cpu_data(cpu).cpu_core_id) -#define TO_ATTR_NO(cpu) (TO_CORE_ID(cpu) + BASE_SYSFS_ATTR_NO) - #ifdef CONFIG_SMP #define for_each_sibling(i, cpu) \ for_each_cpu(i, topology_sibling_cpumask(cpu)) @@ -91,6 +88,8 @@ struct temp_data { struct platform_data { struct device *hwmon_dev; u16 pkg_id; + u16 cpu_map[NUM_REAL_CORES]; + struct ida ida; struct cpumask cpumask; struct temp_data *core_data[MAX_CORE_DATA]; struct device_attribute name_attr; @@ -441,7 +440,7 @@ static struct temp_data *init_temp_data( MSR_IA32_THERM_STATUS; tdata->is_pkg_data = pkg_flag; tdata->cpu = cpu; - tdata->cpu_core_id = TO_CORE_ID(cpu); + tdata->cpu_core_id = topology_core_id(cpu); tdata->attr_size = MAX_CORE_ATTRS; mutex_init(&tdata->update_lock); return tdata; @@ -454,7 +453,7 @@ static int create_core_data(struct platf struct platform_data *pdata = platform_get_drvdata(pdev); struct cpuinfo_x86 *c = &cpu_data(cpu); u32 eax, edx; - int err, attr_no; + int err, index, attr_no;
/* * Find attr number for sysfs: @@ -462,14 +461,26 @@ static int create_core_data(struct platf * The attr number is always core id + 2 * The Pkgtemp will always show up as temp1_*, if available */ - attr_no = pkg_flag ? PKG_SYSFS_ATTR_NO : TO_ATTR_NO(cpu); + if (pkg_flag) { + attr_no = PKG_SYSFS_ATTR_NO; + } else { + index = ida_alloc(&pdata->ida, GFP_KERNEL); + if (index < 0) + return index; + pdata->cpu_map[index] = topology_core_id(cpu); + attr_no = index + BASE_SYSFS_ATTR_NO; + }
- if (attr_no > MAX_CORE_DATA - 1) - return -ERANGE; + if (attr_no > MAX_CORE_DATA - 1) { + err = -ERANGE; + goto ida_free; + }
tdata = init_temp_data(cpu, pkg_flag); - if (!tdata) - return -ENOMEM; + if (!tdata) { + err = -ENOMEM; + goto ida_free; + }
/* Test if we can access the status register */ err = rdmsr_safe_on_cpu(cpu, tdata->status_reg, &eax, &edx); @@ -505,6 +516,9 @@ static int create_core_data(struct platf exit_free: pdata->core_data[attr_no] = NULL; kfree(tdata); +ida_free: + if (!pkg_flag) + ida_free(&pdata->ida, index); return err; }
@@ -524,6 +538,9 @@ static void coretemp_remove_core(struct
kfree(pdata->core_data[indx]); pdata->core_data[indx] = NULL; + + if (indx >= BASE_SYSFS_ATTR_NO) + ida_free(&pdata->ida, indx - BASE_SYSFS_ATTR_NO); }
static int coretemp_probe(struct platform_device *pdev) @@ -537,6 +554,7 @@ static int coretemp_probe(struct platfor return -ENOMEM;
pdata->pkg_id = pdev->id; + ida_init(&pdata->ida); platform_set_drvdata(pdev, pdata);
pdata->hwmon_dev = devm_hwmon_device_register_with_groups(dev, DRVNAME, @@ -553,6 +571,7 @@ static int coretemp_remove(struct platfo if (pdata->core_data[i]) coretemp_remove_core(pdata, i);
+ ida_destroy(&pdata->ida); return 0; }
@@ -647,7 +666,7 @@ static int coretemp_cpu_offline(unsigned struct platform_device *pdev = coretemp_get_pdev(cpu); struct platform_data *pd; struct temp_data *tdata; - int indx, target; + int i, indx = -1, target;
/* * Don't execute this on suspend as the device remove locks @@ -660,12 +679,19 @@ static int coretemp_cpu_offline(unsigned if (!pdev) return 0;
- /* The core id is too big, just return */ - indx = TO_ATTR_NO(cpu); - if (indx > MAX_CORE_DATA - 1) + pd = platform_get_drvdata(pdev); + + for (i = 0; i < NUM_REAL_CORES; i++) { + if (pd->cpu_map[i] == topology_core_id(cpu)) { + indx = i + BASE_SYSFS_ATTR_NO; + break; + } + } + + /* Too many cores and this core is not populated, just return */ + if (indx < 0) return 0;
- pd = platform_get_drvdata(pdev); tdata = pd->core_data[indx];
cpumask_clear_cpu(cpu, &pd->cpumask);
From: Alexander Stein alexander.stein@ew.tq-group.com
commit 979556f1521a835a059de3b117b9c6c6642c7d58 upstream.
'ahci:' is an invalid prefix, preventing the module from autoloading. Fix this by using the 'platform:' prefix and DRV_NAME.
Fixes: 9e54eae23bc9 ("ahci_imx: add ahci sata support on imx platforms") Cc: stable@vger.kernel.org Signed-off-by: Alexander Stein alexander.stein@ew.tq-group.com Reviewed-by: Fabio Estevam festevam@gmail.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/ahci_imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -1230,4 +1230,4 @@ module_platform_driver(imx_ahci_driver); MODULE_DESCRIPTION("Freescale i.MX AHCI SATA platform driver"); MODULE_AUTHOR("Richard Zhu Hong-Xing.Zhu@freescale.com"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("ahci:imx"); +MODULE_ALIAS("platform:" DRV_NAME);
From: Kai-Heng Feng kai.heng.feng@canonical.com
commit 1e41e693f458eef2d5728207dbd327cd3b16580a upstream.
UBSAN complains about array-index-out-of-bounds: [ 1.980703] kernel: UBSAN: array-index-out-of-bounds in /build/linux-9H675w/linux-5.15.0/drivers/ata/libahci.c:968:41 [ 1.980709] kernel: index 15 is out of range for type 'ahci_em_priv [8]' [ 1.980713] kernel: CPU: 0 PID: 209 Comm: scsi_eh_8 Not tainted 5.15.0-25-generic #25-Ubuntu [ 1.980716] kernel: Hardware name: System manufacturer System Product Name/P5Q3, BIOS 1102 06/11/2010 [ 1.980718] kernel: Call Trace: [ 1.980721] kernel: <TASK> [ 1.980723] kernel: show_stack+0x52/0x58 [ 1.980729] kernel: dump_stack_lvl+0x4a/0x5f [ 1.980734] kernel: dump_stack+0x10/0x12 [ 1.980736] kernel: ubsan_epilogue+0x9/0x45 [ 1.980739] kernel: __ubsan_handle_out_of_bounds.cold+0x44/0x49 [ 1.980742] kernel: ahci_qc_issue+0x166/0x170 [libahci] [ 1.980748] kernel: ata_qc_issue+0x135/0x240 [ 1.980752] kernel: ata_exec_internal_sg+0x2c4/0x580 [ 1.980754] kernel: ? vprintk_default+0x1d/0x20 [ 1.980759] kernel: ata_exec_internal+0x67/0xa0 [ 1.980762] kernel: sata_pmp_read+0x8d/0xc0 [ 1.980765] kernel: sata_pmp_read_gscr+0x3c/0x90 [ 1.980768] kernel: sata_pmp_attach+0x8b/0x310 [ 1.980771] kernel: ata_eh_revalidate_and_attach+0x28c/0x4b0 [ 1.980775] kernel: ata_eh_recover+0x6b6/0xb30 [ 1.980778] kernel: ? ahci_do_hardreset+0x180/0x180 [libahci] [ 1.980783] kernel: ? ahci_stop_engine+0xb0/0xb0 [libahci] [ 1.980787] kernel: ? ahci_do_softreset+0x290/0x290 [libahci] [ 1.980792] kernel: ? trace_event_raw_event_ata_eh_link_autopsy_qc+0xe0/0xe0 [ 1.980795] kernel: sata_pmp_eh_recover.isra.0+0x214/0x560 [ 1.980799] kernel: sata_pmp_error_handler+0x23/0x40 [ 1.980802] kernel: ahci_error_handler+0x43/0x80 [libahci] [ 1.980806] kernel: ata_scsi_port_error_handler+0x2b1/0x600 [ 1.980810] kernel: ata_scsi_error+0x9c/0xd0 [ 1.980813] kernel: scsi_error_handler+0xa1/0x180 [ 1.980817] kernel: ? scsi_unjam_host+0x1c0/0x1c0 [ 1.980820] kernel: kthread+0x12a/0x150 [ 1.980823] kernel: ? set_kthread_struct+0x50/0x50 [ 1.980826] kernel: ret_from_fork+0x22/0x30 [ 1.980831] kernel: </TASK>
This happens because sata_pmp_init_links() initialize link->pmp up to SATA_PMP_MAX_PORTS while em_priv is declared as 8 elements array.
I can't find the maximum Enclosure Management ports specified in AHCI spec v1.3.1, but "12.2.1 LED message type" states that "Port Multiplier Information" can utilize 4 bits, which implies it can support up to 16 ports. Hence, use SATA_PMP_MAX_PORTS as EM_MAX_SLOTS to resolve the issue.
BugLink: https://bugs.launchpad.net/bugs/1970074 Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/ahci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -254,7 +254,7 @@ enum { PCS_7 = 0x94, /* 7+ port PCS (Denverton) */
/* em constants */ - EM_MAX_SLOTS = 8, + EM_MAX_SLOTS = SATA_PMP_MAX_PORTS, EM_MAX_RETRY = 5,
/* em_ctl bits */
From: Fabien Parent fabien.parent@linaro.org
commit 9f42cf54403a42cb092636804d2628d8ecf71e75 upstream.
If for some reason the speedbin length is incorrect, then there is a memory leak in the error path because we never free the speedbin buffer. This commit fixes the error path to always free the speedbin buffer.
Cc: v5.7+ stable@vger.kernel.org # v5.7+ Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs") Signed-off-by: Fabien Parent fabien.parent@linaro.org Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/cpufreq/qcom-cpufreq-nvmem.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c @@ -215,6 +215,7 @@ static int qcom_cpufreq_krait_name_versi int speed = 0, pvs = 0, pvs_ver = 0; u8 *speedbin; size_t len; + int ret = 0;
speedbin = nvmem_cell_read(speedbin_nvmem, &len);
@@ -232,7 +233,8 @@ static int qcom_cpufreq_krait_name_versi break; default: dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n"); - return -ENODEV; + ret = -ENODEV; + goto len_error; }
snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d", @@ -240,8 +242,9 @@ static int qcom_cpufreq_krait_name_versi
drv->versions = (1 << speed);
+len_error: kfree(speedbin); - return 0; + return ret; }
static const struct qcom_cpufreq_match_data match_data_kryo = {
From: Alexander Graf graf@amazon.com
commit ed51862f2f57cbce6fed2d4278cfe70a490899fd upstream.
We will introduce the first architecture specific compat vm ioctl in the next patch. Add all necessary boilerplate to allow architectures to override compat vm ioctls when necessary.
Signed-off-by: Alexander Graf graf@amazon.com Message-Id: 20221017184541.2658-2-graf@amazon.com Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/kvm_host.h | 2 ++ virt/kvm/kvm_main.c | 11 +++++++++++ 2 files changed, 13 insertions(+)
--- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -911,6 +911,8 @@ int kvm_vm_ioctl_enable_cap(struct kvm * struct kvm_enable_cap *cap); long kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg); +long kvm_arch_vm_compat_ioctl(struct file *filp, unsigned int ioctl, + unsigned long arg);
int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu); int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu); --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -3966,6 +3966,12 @@ struct compat_kvm_clear_dirty_log { }; };
+long __weak kvm_arch_vm_compat_ioctl(struct file *filp, unsigned int ioctl, + unsigned long arg) +{ + return -ENOTTY; +} + static long kvm_vm_compat_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { @@ -3974,6 +3980,11 @@ static long kvm_vm_compat_ioctl(struct f
if (kvm->mm != current->mm || kvm->vm_bugged) return -EIO; + + r = kvm_arch_vm_compat_ioctl(filp, ioctl, arg); + if (r != -ENOTTY) + return r; + switch (ioctl) { #ifdef CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT case KVM_CLEAR_DIRTY_LOG: {
From: Eric Ren renzhengeek@gmail.com
commit c000a2607145d28b06c697f968491372ea56c23a upstream.
With some PCIe topologies, restoring a guest fails while parsing the ITS device tables.
Reproducer hints: 1. Create ARM virt VM with pxb-pcie bus which adds extra host bridges, with qemu command like:
``` -device pxb-pcie,bus_nr=8,id=pci.x,numa_node=0,bus=pcie.0 \ -device pcie-root-port,..,bus=pci.x \ ... -device pxb-pcie,bus_nr=37,id=pci.y,numa_node=1,bus=pcie.0 \ -device pcie-root-port,..,bus=pci.y \ ...
``` 2. Ensure the guest uses 2-level device table 3. Perform VM migration which calls save/restore device tables
In that setup, we get a big "offset" between 2 device_ids, which makes unsigned "len" round up a big positive number, causing the scan loop to continue with a bad GPA. For example:
1. L1 table has 2 entries; 2. and we are now scanning at L2 table entry index 2075 (pointed to by L1 first entry) 3. if next device id is 9472, we will get a big offset: 7397; 4. with unsigned 'len', 'len -= offset * esz', len will underflow to a positive number, mistakenly into next iteration with a bad GPA; (It should break out of the current L2 table scanning, and jump into the next L1 table entry) 5. that bad GPA fails the guest read.
Fix it by stopping the L2 table scan when the next device id is outside of the current table, allowing the scan to continue from the next L1 table entry.
Thanks to Eric Auger for the fix suggestion.
Fixes: 920a7a8fa92a ("KVM: arm64: vgic-its: Add infrastructure for tableookup") Suggested-by: Eric Auger eric.auger@redhat.com Signed-off-by: Eric Ren renzhengeek@gmail.com [maz: commit message tidy-up] Signed-off-by: Marc Zyngier maz@kernel.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/d9c3a564af9e2c5bf63f48a7dcbf08cd593c5c0b.166580298... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/kvm/vgic/vgic-its.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
--- a/arch/arm64/kvm/vgic/vgic-its.c +++ b/arch/arm64/kvm/vgic/vgic-its.c @@ -2096,7 +2096,7 @@ static int scan_its_table(struct vgic_it
memset(entry, 0, esz);
- while (len > 0) { + while (true) { int next_offset; size_t byte_offset;
@@ -2109,6 +2109,9 @@ static int scan_its_table(struct vgic_it return next_offset;
byte_offset = next_offset * esz; + if (byte_offset >= len) + break; + id += next_offset; gpa += byte_offset; len -= byte_offset;
From: Sean Young sean@mess.org
commit 20b794ddce475ed012deb365000527c17b3e93e6 upstream.
By rounding down, the actual timeout can be lower than requested. As a result, long spaces just below the requested timeout can be incorrectly reported as timeout and truncated.
Fixes: 877f1a7cee3f ("media: rc: mceusb: allow the timeout to be configurable") Cc: stable@vger.kernel.org Signed-off-by: Sean Young sean@mess.org Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/rc/mceusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -1077,7 +1077,7 @@ static int mceusb_set_timeout(struct rc_ struct mceusb_dev *ir = dev->priv; unsigned int units;
- units = DIV_ROUND_CLOSEST(timeout, MCE_TIME_UNIT); + units = DIV_ROUND_UP(timeout, MCE_TIME_UNIT);
cmdbuf[2] = units >> 8; cmdbuf[3] = units;
From: Bryan O'Donoghue bryan.odonoghue@linaro.org
commit 06a2da340f762addc5935bf851d95b14d4692db2 upstream.
Debugging the decoder on msm8916 I noticed the vdec probe was crashing if the fmt pointer was NULL.
A similar fix from Colin Ian King found by Coverity was implemented for the encoder. Implement the same fix on the decoder.
Fixes: 7472c1c69138 ("[media] media: venus: vdec: add video decoder files") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Bryan O'Donoghue bryan.odonoghue@linaro.org Signed-off-by: Stanimir Varbanov stanimir.varbanov@linaro.org Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/platform/qcom/venus/vdec.c | 2 ++ 1 file changed, 2 insertions(+)
--- a/drivers/media/platform/qcom/venus/vdec.c +++ b/drivers/media/platform/qcom/venus/vdec.c @@ -158,6 +158,8 @@ vdec_try_fmt_common(struct venus_inst *i else return NULL; fmt = find_format(inst, pixmp->pixelformat, f->type); + if (!fmt) + return NULL; }
pixmp->width = clamp(pixmp->width, frame_width_min(inst),
From: Lei Chen lennychen@tencent.com
commit 5a20d073ec54a72d9a732fa44bfe14954eb6332f upstream.
It's unnecessary to call wbt_update_limits explicitly within wbt_init, because it will be called in the following function wbt_queue_depth_changed.
Signed-off-by: Lei Chen lennychen@tencent.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Yu Kuai yukuai3@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- block/blk-wbt.c | 1 - 1 file changed, 1 deletion(-)
--- a/block/blk-wbt.c +++ b/block/blk-wbt.c @@ -840,7 +840,6 @@ int wbt_init(struct request_queue *q) rwb->enable_state = WBT_STATE_ON_DEFAULT; rwb->wc = 1; rwb->rq_depth.default_depth = RWB_DEF_DEPTH; - wbt_update_limits(rwb);
/* * Assign rwb and add the stats callback.
From: Yu Kuai yukuai3@huawei.com
commit 8c5035dfbb9475b67c82b3fdb7351236525bf52b upstream.
Our test found a problem that wbt inflight counter is negative, which will cause io hang(noted that this problem doesn't exist in mainline):
t1: device create t2: issue io add_disk blk_register_queue wbt_enable_default wbt_init rq_qos_add // wb_normal is still 0 /* * in mainline, disk can't be opened before * bdev_add(), however, in old kernels, disk * can be opened before blk_register_queue(). */ blkdev_issue_flush // disk size is 0, however, it's not checked submit_bio_wait submit_bio blk_mq_submit_bio rq_qos_throttle wbt_wait bio_to_wbt_flags rwb_enabled // wb_normal is 0, inflight is not increased
wbt_queue_depth_changed(&rwb->rqos); wbt_update_limits // wb_normal is initialized rq_qos_track wbt_track rq->wbt_flags |= bio_to_wbt_flags(rwb, bio); // wb_normal is not 0,wbt_flags will be set t3: io completion blk_mq_free_request rq_qos_done wbt_done wbt_is_tracked // return true __wbt_done wbt_rqw_done atomic_dec_return(&rqw->inflight); // inflight is decreased
commit 8235b5c1e8c1 ("block: call bdev_add later in device_add_disk") can avoid this problem, however it's better to fix this problem in wbt:
1) Lower kernel can't backport this patch due to lots of refactor. 2) Root cause is that wbt call rq_qos_add() before wb_normal is initialized.
Fixes: e34cbd307477 ("blk-wbt: add general throttling mechanism") Cc: stable@vger.kernel.org Signed-off-by: Yu Kuai yukuai3@huawei.com Link: https://lore.kernel.org/r/20220913105749.3086243-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- block/blk-wbt.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
--- a/block/blk-wbt.c +++ b/block/blk-wbt.c @@ -840,6 +840,10 @@ int wbt_init(struct request_queue *q) rwb->enable_state = WBT_STATE_ON_DEFAULT; rwb->wc = 1; rwb->rq_depth.default_depth = RWB_DEF_DEPTH; + rwb->min_lat_nsec = wbt_default_latency_nsec(q); + + wbt_queue_depth_changed(&rwb->rqos); + wbt_set_write_cache(q, test_bit(QUEUE_FLAG_WC, &q->queue_flags));
/* * Assign rwb and add the stats callback. @@ -847,10 +851,5 @@ int wbt_init(struct request_queue *q) rq_qos_add(q, &rwb->rqos); blk_stat_add_callback(q, rwb->cb);
- rwb->min_lat_nsec = wbt_default_latency_nsec(q); - - wbt_queue_depth_changed(&rwb->rqos); - wbt_set_write_cache(q, test_bit(QUEUE_FLAG_WC, &q->queue_flags)); - return 0; }
From: James Morse james.morse@arm.com
commit 44b3834b2eed595af07021b1c64e6f9bc396398b upstream.
Cortex-A57 and Cortex-A72 have an erratum where an interrupt that occurs between a pair of AES instructions in aarch32 mode may corrupt the ELR. The task will subsequently produce the wrong AES result.
The AES instructions are part of the cryptographic extensions, which are optional. User-space software will detect the support for these instructions from the hwcaps. If the platform doesn't support these instructions a software implementation should be used.
Remove the hwcap bits on affected parts to indicate user-space should not use the AES instructions.
Acked-by: Ard Biesheuvel ardb@kernel.org Signed-off-by: James Morse james.morse@arm.com Link: https://lore.kernel.org/r/20220714161523.279570-3-james.morse@arm.com Signed-off-by: Will Deacon will@kernel.org [florian: removed arch/arm64/tools/cpucaps and fixup cpufeature.c] Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/arm64/silicon-errata.rst | 4 ++++ arch/arm64/Kconfig | 16 ++++++++++++++++ arch/arm64/include/asm/cpucaps.h | 3 ++- arch/arm64/kernel/cpu_errata.c | 16 ++++++++++++++++ arch/arm64/kernel/cpufeature.c | 13 ++++++++++++- 5 files changed, 50 insertions(+), 2 deletions(-)
--- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -76,10 +76,14 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A57 | #1319537 | ARM64_ERRATUM_1319367 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A57 | #1742098 | ARM64_ERRATUM_1742098 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A72 | #853709 | N/A | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A72 | #1319367 | ARM64_ERRATUM_1319367 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A72 | #1655431 | ARM64_ERRATUM_1742098 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A73 | #858921 | ARM64_ERRATUM_858921 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A76 | #1188873,1418040| ARM64_ERRATUM_1418040 | --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -481,6 +481,22 @@ config ARM64_ERRATUM_834220
If unsure, say Y.
+config ARM64_ERRATUM_1742098 + bool "Cortex-A57/A72: 1742098: ELR recorded incorrectly on interrupt taken between cryptographic instructions in a sequence" + depends on COMPAT + default y + help + This option removes the AES hwcap for aarch32 user-space to + workaround erratum 1742098 on Cortex-A57 and Cortex-A72. + + Affected parts may corrupt the AES state if an interrupt is + taken between a pair of AES instructions. These instructions + are only present if the cryptography extensions are present. + All software should have a fallback implementation for CPUs + that don't implement the cryptography extensions. + + If unsure, say Y. + config ARM64_ERRATUM_845719 bool "Cortex-A53: 845719: a load might read incorrect data" depends on COMPAT --- a/arch/arm64/include/asm/cpucaps.h +++ b/arch/arm64/include/asm/cpucaps.h @@ -68,7 +68,8 @@ #define ARM64_WORKAROUND_1508412 58 #define ARM64_SPECTRE_BHB 59 #define ARM64_WORKAROUND_2457168 60 +#define ARM64_WORKAROUND_1742098 61
-#define ARM64_NCAPS 61 +#define ARM64_NCAPS 62
#endif /* __ASM_CPUCAPS_H */ --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -356,6 +356,14 @@ static const struct midr_range erratum_1 }; #endif
+#ifdef CONFIG_ARM64_ERRATUM_1742098 +static struct midr_range broken_aarch32_aes[] = { + MIDR_RANGE(MIDR_CORTEX_A57, 0, 1, 0xf, 0xf), + MIDR_ALL_VERSIONS(MIDR_CORTEX_A72), + {}, +}; +#endif + const struct arm64_cpu_capabilities arm64_errata[] = { #ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE { @@ -555,6 +563,14 @@ const struct arm64_cpu_capabilities arm6 CAP_MIDR_RANGE(MIDR_CORTEX_A510, 0, 0, 1, 1) }, #endif +#ifdef CONFIG_ARM64_ERRATUM_1742098 + { + .desc = "ARM erratum 1742098", + .capability = ARM64_WORKAROUND_1742098, + CAP_MIDR_RANGE_LIST(broken_aarch32_aes), + .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM, + }, +#endif { } }; --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -76,6 +76,7 @@ #include <asm/cpufeature.h> #include <asm/cpu_ops.h> #include <asm/fpsimd.h> +#include <asm/hwcap.h> #include <asm/mmu_context.h> #include <asm/mte.h> #include <asm/processor.h> @@ -1730,6 +1731,14 @@ static void cpu_enable_mte(struct arm64_ } #endif /* CONFIG_ARM64_MTE */
+static void elf_hwcap_fixup(void) +{ +#ifdef CONFIG_ARM64_ERRATUM_1742098 + if (cpus_have_const_cap(ARM64_WORKAROUND_1742098)) + compat_elf_hwcap2 &= ~COMPAT_HWCAP2_AES; +#endif /* ARM64_ERRATUM_1742098 */ +} + /* Internal helper functions to match cpu capability type */ static bool cpucap_late_cpu_optional(const struct arm64_cpu_capabilities *cap) @@ -2735,8 +2744,10 @@ void __init setup_cpu_features(void) setup_system_capabilities(); setup_elf_hwcaps(arm64_elf_hwcaps);
- if (system_supports_32bit_el0()) + if (system_supports_32bit_el0()) { setup_elf_hwcaps(compat_elf_hwcaps); + elf_hwcap_fixup(); + }
if (system_uses_ttbr0_pan()) pr_info("emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching\n");
From: Jean-Francois Le Fillatre jflf_kernel@gmx.com
commit 1bd3a383075c64d638e65d263c9267b08ee7733c upstream.
The Lenovo OneLink+ Dock contains an RTL8153 controller that behaves as a broken CDC device by default. Add the custom Lenovo PID to the r8152 driver to support it properly.
Also, systems compatible with this dock provide a BIOS option to enable MAC address passthrough (as per Lenovo document "ThinkPad Docking Solutions 2017"). Add the custom PID to the MAC passthrough list too.
Tested on a ThinkPad 13 1st gen with the expected results:
passthrough disabled: Invalid header when reading pass-thru MAC addr passthrough enabled: Using pass-thru MAC addr XX:XX:XX:XX:XX:XX
Signed-off-by: Jean-Francois Le Fillatre jflf_kernel@gmx.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/usb/cdc_ether.c | 7 +++++++ drivers/net/usb/r8152.c | 1 + 2 files changed, 8 insertions(+)
--- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -763,6 +763,13 @@ static const struct usb_device_id produc }, #endif
+/* Lenovo ThinkPad OneLink+ Dock (based on Realtek RTL8153) */ +{ + USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3054, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + /* ThinkPad USB-C Dock (based on Realtek RTL8153) */ { USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3062, USB_CLASS_COMM, --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -6870,6 +6870,7 @@ static const struct usb_device_id rtl815 {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927)}, {REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101)}, {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x304f)}, + {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x3054)}, {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x3062)}, {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x3069)}, {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x3082)},
From: Filipe Manana fdmanana@suse.com
[ Upstream commit 4fc7b57228243d09c0d878873bf24fa64a90fa01 ]
When processing delayed data references during backref walking and we are using a share context (we are being called through fiemap), whenever we find a delayed data reference for an inode different from the one we are interested in, then we immediately exit and consider the data extent as shared. This is wrong, because:
1) This might be a DROP reference that will cancel out a reference in the extent tree;
2) Even if it's an ADD reference, it may be followed by a DROP reference that cancels it out.
In either case we should not exit immediately.
Fix this by never exiting when we find a delayed data reference for another inode - instead add the reference and if it does not cancel out other delayed reference, we will exit early when we call extent_is_shared() after processing all delayed references. If we find a drop reference, then signal the code that processes references from the extent tree (add_inline_refs() and add_keyed_refs()) to not exit immediately if it finds there a reference for another inode, since we have delayed drop references that may cancel it out. In this later case we exit once we don't have references in the rb trees that cancel out each other and have two references for different inodes.
Example reproducer for case 1):
$ cat test-1.sh #!/bin/bash
DEV=/dev/sdj MNT=/mnt/sdj
mkfs.btrfs -f $DEV mount $DEV $MNT
xfs_io -f -c "pwrite 0 64K" $MNT/foo cp --reflink=always $MNT/foo $MNT/bar
echo echo "fiemap after cloning:" xfs_io -c "fiemap -v" $MNT/foo
rm -f $MNT/bar echo echo "fiemap after removing file bar:" xfs_io -c "fiemap -v" $MNT/foo
umount $MNT
Running it before this patch, the extent is still listed as shared, it has the flag 0x2000 (FIEMAP_EXTENT_SHARED) set:
$ ./test-1.sh fiemap after cloning: /mnt/sdj/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 26624..26751 128 0x2001
fiemap after removing file bar: /mnt/sdj/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 26624..26751 128 0x2001
Example reproducer for case 2):
$ cat test-2.sh #!/bin/bash
DEV=/dev/sdj MNT=/mnt/sdj
mkfs.btrfs -f $DEV mount $DEV $MNT
xfs_io -f -c "pwrite 0 64K" $MNT/foo cp --reflink=always $MNT/foo $MNT/bar
# Flush delayed references to the extent tree and commit current # transaction. sync
echo echo "fiemap after cloning:" xfs_io -c "fiemap -v" $MNT/foo
rm -f $MNT/bar echo echo "fiemap after removing file bar:" xfs_io -c "fiemap -v" $MNT/foo
umount $MNT
Running it before this patch, the extent is still listed as shared, it has the flag 0x2000 (FIEMAP_EXTENT_SHARED) set:
$ ./test-2.sh fiemap after cloning: /mnt/sdj/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 26624..26751 128 0x2001
fiemap after removing file bar: /mnt/sdj/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 26624..26751 128 0x2001
After this patch, after deleting bar in both tests, the extent is not reported with the 0x2000 flag anymore, it gets only the flag 0x1 (which is FIEMAP_EXTENT_LAST):
$ ./test-1.sh fiemap after cloning: /mnt/sdj/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 26624..26751 128 0x2001
fiemap after removing file bar: /mnt/sdj/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 26624..26751 128 0x1
$ ./test-2.sh fiemap after cloning: /mnt/sdj/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 26624..26751 128 0x2001
fiemap after removing file bar: /mnt/sdj/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 26624..26751 128 0x1
These tests will later be converted to a test case for fstests.
Fixes: dc046b10c8b7d4 ("Btrfs: make fiemap not blow when you have lots of snapshots") Signed-off-by: Filipe Manana fdmanana@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/backref.c | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-)
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index baff31a147e7..7e8fac12f3f8 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -137,6 +137,7 @@ struct share_check { u64 root_objectid; u64 inum; int share_count; + bool have_delayed_delete_refs; };
static inline int extent_is_shared(struct share_check *sc) @@ -881,13 +882,22 @@ static int add_delayed_refs(const struct btrfs_fs_info *fs_info, key.offset = ref->offset;
/* - * Found a inum that doesn't match our known inum, we - * know it's shared. + * If we have a share check context and a reference for + * another inode, we can't exit immediately. This is + * because even if this is a BTRFS_ADD_DELAYED_REF + * reference we may find next a BTRFS_DROP_DELAYED_REF + * which cancels out this ADD reference. + * + * If this is a DROP reference and there was no previous + * ADD reference, then we need to signal that when we + * process references from the extent tree (through + * add_inline_refs() and add_keyed_refs()), we should + * not exit early if we find a reference for another + * inode, because one of the delayed DROP references + * may cancel that reference in the extent tree. */ - if (sc && sc->inum && ref->objectid != sc->inum) { - ret = BACKREF_FOUND_SHARED; - goto out; - } + if (sc && count < 0) + sc->have_delayed_delete_refs = true;
ret = add_indirect_ref(fs_info, preftrees, ref->root, &key, 0, node->bytenr, count, sc, @@ -917,7 +927,7 @@ static int add_delayed_refs(const struct btrfs_fs_info *fs_info, } if (!ret) ret = extent_is_shared(sc); -out: + spin_unlock(&head->lock); return ret; } @@ -1020,7 +1030,8 @@ static int add_inline_refs(const struct btrfs_fs_info *fs_info, key.type = BTRFS_EXTENT_DATA_KEY; key.offset = btrfs_extent_data_ref_offset(leaf, dref);
- if (sc && sc->inum && key.objectid != sc->inum) { + if (sc && sc->inum && key.objectid != sc->inum && + !sc->have_delayed_delete_refs) { ret = BACKREF_FOUND_SHARED; break; } @@ -1030,6 +1041,7 @@ static int add_inline_refs(const struct btrfs_fs_info *fs_info, ret = add_indirect_ref(fs_info, preftrees, root, &key, 0, bytenr, count, sc, GFP_NOFS); + break; } default: @@ -1119,7 +1131,8 @@ static int add_keyed_refs(struct btrfs_fs_info *fs_info, key.type = BTRFS_EXTENT_DATA_KEY; key.offset = btrfs_extent_data_ref_offset(leaf, dref);
- if (sc && sc->inum && key.objectid != sc->inum) { + if (sc && sc->inum && key.objectid != sc->inum && + !sc->have_delayed_delete_refs) { ret = BACKREF_FOUND_SHARED; break; } @@ -1542,6 +1555,7 @@ int btrfs_check_shared(struct btrfs_root *root, u64 inum, u64 bytenr, .root_objectid = root->root_key.objectid, .inum = inum, .share_count = 0, + .have_delayed_delete_refs = false, };
ulist_init(roots); @@ -1576,6 +1590,7 @@ int btrfs_check_shared(struct btrfs_root *root, u64 inum, u64 bytenr, break; bytenr = node->val; shared.share_count = 0; + shared.have_delayed_delete_refs = false; cond_resched(); }
From: Filipe Manana fdmanana@suse.com
[ Upstream commit 943553ef9b51db303ab2b955c1025261abfdf6fb ]
During backref walking, when processing a delayed reference with a type of BTRFS_TREE_BLOCK_REF_KEY, we have two bugs there:
1) We are accessing the delayed references extent_op, and its key, without the protection of the delayed ref head's lock;
2) If there's no extent op for the delayed ref head, we end up with an uninitialized key in the stack, variable 'tmp_op_key', and then pass it to add_indirect_ref(), which adds the reference to the indirect refs rb tree.
This is wrong, because indirect references should have a NULL key when we don't have access to the key, and in that case they should be added to the indirect_missing_keys rb tree and not to the indirect rb tree.
This means that if have BTRFS_TREE_BLOCK_REF_KEY delayed ref resulting from freeing an extent buffer, therefore with a count of -1, it will not cancel out the corresponding reference we have in the extent tree (with a count of 1), since both references end up in different rb trees.
When using fiemap, where we often need to check if extents are shared through shared subtrees resulting from snapshots, it means we can incorrectly report an extent as shared when it's no longer shared. However this is temporary because after the transaction is committed the extent is no longer reported as shared, as running the delayed reference results in deleting the tree block reference from the extent tree.
Outside the fiemap context, the result is unpredictable, as the key was not initialized but it's used when navigating the rb trees to insert and search for references (prelim_ref_compare()), and we expect all references in the indirect rb tree to have valid keys.
The following reproducer triggers the second bug:
$ cat test.sh #!/bin/bash
DEV=/dev/sdj MNT=/mnt/sdj
mkfs.btrfs -f $DEV mount -o compress $DEV $MNT
# With a compressed 128M file we get a tree height of 2 (level 1 root). xfs_io -f -c "pwrite -b 1M 0 128M" $MNT/foo
btrfs subvolume snapshot $MNT $MNT/snap
# Fiemap should output 0x2008 in the flags column. # 0x2000 means shared extent # 0x8 means encoded extent (because it's compressed) echo echo "fiemap after snapshot, range [120M, 120M + 128K):" xfs_io -c "fiemap -v 120M 128K" $MNT/foo echo
# Overwrite one extent and fsync to flush delalloc and COW a new path # in the snapshot's tree. # # After this we have a BTRFS_DROP_DELAYED_REF delayed ref of type # BTRFS_TREE_BLOCK_REF_KEY with a count of -1 for every COWed extent # buffer in the path. # # In the extent tree we have inline references of type # BTRFS_TREE_BLOCK_REF_KEY, with a count of 1, for the same extent # buffers, so they should cancel each other, and the extent buffers in # the fs tree should no longer be considered as shared. # echo "Overwriting file range [120M, 120M + 128K)..." xfs_io -c "pwrite -b 128K 120M 128K" $MNT/snap/foo xfs_io -c "fsync" $MNT/snap/foo
# Fiemap should output 0x8 in the flags column. The extent in the range # [120M, 120M + 128K) is no longer shared, it's now exclusive to the fs # tree. echo echo "fiemap after overwrite range [120M, 120M + 128K):" xfs_io -c "fiemap -v 120M 128K" $MNT/foo echo
umount $MNT
Running it before this patch:
$ ./test.sh (...) wrote 134217728/134217728 bytes at offset 0 128 MiB, 128 ops; 0.1152 sec (1.085 GiB/sec and 1110.5809 ops/sec) Create a snapshot of '/mnt/sdj' in '/mnt/sdj/snap'
fiemap after snapshot, range [120M, 120M + 128K): /mnt/sdj/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [245760..246015]: 34304..34559 256 0x2008
Overwriting file range [120M, 120M + 128K)... wrote 131072/131072 bytes at offset 125829120 128 KiB, 1 ops; 0.0001 sec (683.060 MiB/sec and 5464.4809 ops/sec)
fiemap after overwrite range [120M, 120M + 128K): /mnt/sdj/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [245760..246015]: 34304..34559 256 0x2008
The extent in the range [120M, 120M + 128K) is still reported as shared (0x2000 bit set) after overwriting that range and flushing delalloc, which is not correct - an entire path was COWed in the snapshot's tree and the extent is now only referenced by the original fs tree.
Running it after this patch:
$ ./test.sh (...) wrote 134217728/134217728 bytes at offset 0 128 MiB, 128 ops; 0.1198 sec (1.043 GiB/sec and 1068.2067 ops/sec) Create a snapshot of '/mnt/sdj' in '/mnt/sdj/snap'
fiemap after snapshot, range [120M, 120M + 128K): /mnt/sdj/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [245760..246015]: 34304..34559 256 0x2008
Overwriting file range [120M, 120M + 128K)... wrote 131072/131072 bytes at offset 125829120 128 KiB, 1 ops; 0.0001 sec (694.444 MiB/sec and 5555.5556 ops/sec)
fiemap after overwrite range [120M, 120M + 128K): /mnt/sdj/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [245760..246015]: 34304..34559 256 0x8
Now the extent is not reported as shared anymore.
So fix this by passing a NULL key pointer to add_indirect_ref() when processing a delayed reference for a tree block if there's no extent op for our delayed ref head with a defined key. Also access the extent op only after locking the delayed ref head's lock.
The reproducer will be converted later to a test case for fstests.
Fixes: 86d5f994425252 ("btrfs: convert prelimary reference tracking to use rbtrees") Fixes: a6dbceafb915e8 ("btrfs: Remove unused op_key var from add_delayed_refs") Signed-off-by: Filipe Manana fdmanana@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/backref.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index 7e8fac12f3f8..92cb16c0e5ee 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -818,16 +818,11 @@ static int add_delayed_refs(const struct btrfs_fs_info *fs_info, struct preftrees *preftrees, struct share_check *sc) { struct btrfs_delayed_ref_node *node; - struct btrfs_delayed_extent_op *extent_op = head->extent_op; struct btrfs_key key; - struct btrfs_key tmp_op_key; struct rb_node *n; int count; int ret = 0;
- if (extent_op && extent_op->update_key) - btrfs_disk_key_to_cpu(&tmp_op_key, &extent_op->key); - spin_lock(&head->lock); for (n = rb_first_cached(&head->ref_tree); n; n = rb_next(n)) { node = rb_entry(n, struct btrfs_delayed_ref_node, @@ -853,10 +848,16 @@ static int add_delayed_refs(const struct btrfs_fs_info *fs_info, case BTRFS_TREE_BLOCK_REF_KEY: { /* NORMAL INDIRECT METADATA backref */ struct btrfs_delayed_tree_ref *ref; + struct btrfs_key *key_ptr = NULL; + + if (head->extent_op && head->extent_op->update_key) { + btrfs_disk_key_to_cpu(&key, &head->extent_op->key); + key_ptr = &key; + }
ref = btrfs_delayed_node_to_tree_ref(node); ret = add_indirect_ref(fs_info, preftrees, ref->root, - &tmp_op_key, ref->level + 1, + key_ptr, ref->level + 1, node->bytenr, count, sc, GFP_ATOMIC); break;
From: Tony Luck tony.luck@intel.com
[ Upstream commit f6ec01da40e4139b41179f046044ee7c4f6370dc ]
If there is no user space consumer of extlog_mem trace records, then Linux properly handles multiple error records in an ELOG block
extlog_print() print_extlog_rcd() __print_extlog_rcd() cper_estatus_print() apei_estatus_for_each_section()
But the other code path hard codes looking for a single record to output a trace record.
Fix by using the same apei_estatus_for_each_section() iterator to step over all records.
Fixes: 2dfb7d51a61d ("trace, RAS: Add eMCA trace event interface") Signed-off-by: Tony Luck tony.luck@intel.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/acpi_extlog.c | 33 ++++++++++++++++++++------------- 1 file changed, 20 insertions(+), 13 deletions(-)
diff --git a/drivers/acpi/acpi_extlog.c b/drivers/acpi/acpi_extlog.c index 72f1fb77abcd..e648158368a7 100644 --- a/drivers/acpi/acpi_extlog.c +++ b/drivers/acpi/acpi_extlog.c @@ -12,6 +12,7 @@ #include <linux/ratelimit.h> #include <linux/edac.h> #include <linux/ras.h> +#include <acpi/ghes.h> #include <asm/cpu.h> #include <asm/mce.h>
@@ -138,8 +139,8 @@ static int extlog_print(struct notifier_block *nb, unsigned long val, int cpu = mce->extcpu; struct acpi_hest_generic_status *estatus, *tmp; struct acpi_hest_generic_data *gdata; - const guid_t *fru_id = &guid_null; - char *fru_text = ""; + const guid_t *fru_id; + char *fru_text; guid_t *sec_type; static u32 err_seq;
@@ -160,17 +161,23 @@ static int extlog_print(struct notifier_block *nb, unsigned long val,
/* log event via trace */ err_seq++; - gdata = (struct acpi_hest_generic_data *)(tmp + 1); - if (gdata->validation_bits & CPER_SEC_VALID_FRU_ID) - fru_id = (guid_t *)gdata->fru_id; - if (gdata->validation_bits & CPER_SEC_VALID_FRU_TEXT) - fru_text = gdata->fru_text; - sec_type = (guid_t *)gdata->section_type; - if (guid_equal(sec_type, &CPER_SEC_PLATFORM_MEM)) { - struct cper_sec_mem_err *mem = (void *)(gdata + 1); - if (gdata->error_data_length >= sizeof(*mem)) - trace_extlog_mem_event(mem, err_seq, fru_id, fru_text, - (u8)gdata->error_severity); + apei_estatus_for_each_section(tmp, gdata) { + if (gdata->validation_bits & CPER_SEC_VALID_FRU_ID) + fru_id = (guid_t *)gdata->fru_id; + else + fru_id = &guid_null; + if (gdata->validation_bits & CPER_SEC_VALID_FRU_TEXT) + fru_text = gdata->fru_text; + else + fru_text = ""; + sec_type = (guid_t *)gdata->section_type; + if (guid_equal(sec_type, &CPER_SEC_PLATFORM_MEM)) { + struct cper_sec_mem_err *mem = (void *)(gdata + 1); + + if (gdata->error_data_length >= sizeof(*mem)) + trace_extlog_mem_event(mem, err_seq, fru_id, fru_text, + (u8)gdata->error_severity); + } }
out:
From: Mark Tomlinson mark.tomlinson@alliedtelesis.co.nz
[ Upstream commit 28be7ca4fcfd69a2d52aaa331adbf9dbe91f9e6e ]
The trial period exists until jiffies is after addr_trial_end. But as jiffies will eventually overflow, just using time_after will eventually give incorrect results. As the node address is set once the trial period ends, this can be used to know that we are not in the trial period.
Fixes: e415577f57f4 ("tipc: correct discovery message handling during address trial period") Signed-off-by: Mark Tomlinson mark.tomlinson@alliedtelesis.co.nz Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/tipc/discover.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/tipc/discover.c b/net/tipc/discover.c index 14bc20604051..2ae268b67465 100644 --- a/net/tipc/discover.c +++ b/net/tipc/discover.c @@ -147,8 +147,8 @@ static bool tipc_disc_addr_trial_msg(struct tipc_discoverer *d, { struct net *net = d->net; struct tipc_net *tn = tipc_net(net); - bool trial = time_before(jiffies, tn->addr_trial_end); u32 self = tipc_own_addr(net); + bool trial = time_before(jiffies, tn->addr_trial_end) && !self;
if (mtyp == DSC_TRIAL_FAIL_MSG) { if (!trial)
From: Alexander Potapenko glider@google.com
[ Upstream commit 777ecaabd614d47c482a5c9031579e66da13989a ]
Use a 8-byte write to initialize sub.usr_handle in tipc_topsrv_kern_subscr(), otherwise four bytes remain uninitialized when issuing setsockopt(..., SOL_TIPC, ...). This resulted in an infoleak reported by KMSAN when the packet was received:
===================================================== BUG: KMSAN: kernel-infoleak in copyout+0xbc/0x100 lib/iov_iter.c:169 instrument_copy_to_user ./include/linux/instrumented.h:121 copyout+0xbc/0x100 lib/iov_iter.c:169 _copy_to_iter+0x5c0/0x20a0 lib/iov_iter.c:527 copy_to_iter ./include/linux/uio.h:176 simple_copy_to_iter+0x64/0xa0 net/core/datagram.c:513 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419 skb_copy_datagram_iter+0x58/0x200 net/core/datagram.c:527 skb_copy_datagram_msg ./include/linux/skbuff.h:3903 packet_recvmsg+0x521/0x1e70 net/packet/af_packet.c:3469 ____sys_recvmsg+0x2c4/0x810 net/socket.c:? ___sys_recvmsg+0x217/0x840 net/socket.c:2743 __sys_recvmsg net/socket.c:2773 __do_sys_recvmsg net/socket.c:2783 __se_sys_recvmsg net/socket.c:2780 __x64_sys_recvmsg+0x364/0x540 net/socket.c:2780 do_syscall_x64 arch/x86/entry/common.c:50 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd arch/x86/entry/entry_64.S:120
...
Uninit was stored to memory at: tipc_sub_subscribe+0x42d/0xb50 net/tipc/subscr.c:156 tipc_conn_rcv_sub+0x246/0x620 net/tipc/topsrv.c:375 tipc_topsrv_kern_subscr+0x2e8/0x400 net/tipc/topsrv.c:579 tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190 tipc_sk_join+0x2a8/0x770 net/tipc/socket.c:3084 tipc_setsockopt+0xae5/0xe40 net/tipc/socket.c:3201 __sys_setsockopt+0x87f/0xdc0 net/socket.c:2252 __do_sys_setsockopt net/socket.c:2263 __se_sys_setsockopt net/socket.c:2260 __x64_sys_setsockopt+0xe0/0x160 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:50 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd arch/x86/entry/entry_64.S:120
Local variable sub created at: tipc_topsrv_kern_subscr+0x57/0x400 net/tipc/topsrv.c:562 tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190
Bytes 84-87 of 88 are uninitialized Memory access of size 88 starts at ffff88801ed57cd0 Data copied to user address 0000000020000400 ... =====================================================
Signed-off-by: Alexander Potapenko glider@google.com Fixes: 026321c6d056a5 ("tipc: rename tipc_server to tipc_topsrv") Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/tipc/topsrv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/tipc/topsrv.c b/net/tipc/topsrv.c index 13f3143609f9..d9e2c0fea3f2 100644 --- a/net/tipc/topsrv.c +++ b/net/tipc/topsrv.c @@ -568,7 +568,7 @@ bool tipc_topsrv_kern_subscr(struct net *net, u32 port, u32 type, u32 lower, sub.seq.upper = upper; sub.timeout = TIPC_WAIT_FOREVER; sub.filter = filter; - *(u32 *)&sub.usr_handle = port; + *(u64 *)&sub.usr_handle = (u64)port;
con = tipc_conn_alloc(tipc_topsrv(net)); if (IS_ERR(con))
From: Jan Sokolowski jan.sokolowski@intel.com
[ Upstream commit aae425efdfd1b1d8452260a3cb49344ebf20b1f5 ]
During reallocation of RX buffers, new DMA mappings are created for those buffers.
steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done
This resulted in crash: i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536 Driver BUG WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50 Call Trace: i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b Missing register, driver bug WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140 Call Trace: xdp_rxq_info_unreg+0x1e/0x50 i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b
This was caused because of new buffers with different RX ring count should substitute older ones, but those buffers were freed in i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi, thus kfree on rx_bi caused leak of already mapped DMA.
Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally reallocate back to rx_bi when BPF program unloads.
If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XSP_SETUP_XSK_POOL handler.
Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings") Signed-off-by: Jan Sokolowski jan.sokolowski@intel.com Signed-off-by: Mateusz Palczewski mateusz.palczewski@intel.com Signed-off-by: Jacob Keller jacob.e.keller@intel.com Tested-by: Chandan chandanx.rout@intel.com (A Contingent Worker at Intel) Tested-by: Gurucharan gurucharanx.g@intel.com (A Contingent worker at Intel) Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/intel/i40e/i40e_ethtool.c | 3 - drivers/net/ethernet/intel/i40e/i40e_main.c | 16 +++-- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 13 ++-- drivers/net/ethernet/intel/i40e/i40e_txrx.h | 1 - drivers/net/ethernet/intel/i40e/i40e_xsk.c | 67 ++++++++++++++++--- drivers/net/ethernet/intel/i40e/i40e_xsk.h | 2 +- 6 files changed, 74 insertions(+), 28 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index 63054061966e..cc5f5c237774 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -2081,9 +2081,6 @@ static int i40e_set_ringparam(struct net_device *netdev, */ rx_rings[i].tail = hw->hw_addr + I40E_PRTGEN_STATUS; err = i40e_setup_rx_descriptors(&rx_rings[i]); - if (err) - goto rx_unwind; - err = i40e_alloc_rx_bi(&rx_rings[i]); if (err) goto rx_unwind;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index c7f243ddbcf7..ea6a984c6d12 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -3409,12 +3409,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) if (ring->vsi->type == I40E_VSI_MAIN) xdp_rxq_info_unreg_mem_model(&ring->xdp_rxq);
- kfree(ring->rx_bi); ring->xsk_pool = i40e_xsk_pool(ring); if (ring->xsk_pool) { - ret = i40e_alloc_rx_bi_zc(ring); - if (ret) - return ret; ring->rx_buf_len = xsk_pool_get_rx_frame_size(ring->xsk_pool); /* For AF_XDP ZC, we disallow packets to span on @@ -3432,9 +3428,6 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) ring->queue_index);
} else { - ret = i40e_alloc_rx_bi(ring); - if (ret) - return ret; ring->rx_buf_len = vsi->rx_buf_len; if (ring->vsi->type == I40E_VSI_MAIN) { ret = xdp_rxq_info_reg_mem_model(&ring->xdp_rxq, @@ -12684,6 +12677,14 @@ static int i40e_xdp_setup(struct i40e_vsi *vsi, i40e_reset_and_rebuild(pf, true, true); }
+ if (!i40e_enabled_xdp_vsi(vsi) && prog) { + if (i40e_realloc_rx_bi_zc(vsi, true)) + return -ENOMEM; + } else if (i40e_enabled_xdp_vsi(vsi) && !prog) { + if (i40e_realloc_rx_bi_zc(vsi, false)) + return -ENOMEM; + } + for (i = 0; i < vsi->num_queue_pairs; i++) WRITE_ONCE(vsi->rx_rings[i]->xdp_prog, vsi->xdp_prog);
@@ -12916,6 +12917,7 @@ int i40e_queue_pair_disable(struct i40e_vsi *vsi, int queue_pair)
i40e_queue_pair_disable_irq(vsi, queue_pair); err = i40e_queue_pair_toggle_rings(vsi, queue_pair, false /* off */); + i40e_clean_rx_ring(vsi->rx_rings[queue_pair]); i40e_queue_pair_toggle_napi(vsi, queue_pair, false /* off */); i40e_queue_pair_clean_rings(vsi, queue_pair); i40e_queue_pair_reset_stats(vsi, queue_pair); diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 5ad28129fab2..43be33d87e39 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -1305,14 +1305,6 @@ int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring) return -ENOMEM; }
-int i40e_alloc_rx_bi(struct i40e_ring *rx_ring) -{ - unsigned long sz = sizeof(*rx_ring->rx_bi) * rx_ring->count; - - rx_ring->rx_bi = kzalloc(sz, GFP_KERNEL); - return rx_ring->rx_bi ? 0 : -ENOMEM; -} - static void i40e_clear_rx_bi(struct i40e_ring *rx_ring) { memset(rx_ring->rx_bi, 0, sizeof(*rx_ring->rx_bi) * rx_ring->count); @@ -1443,6 +1435,11 @@ int i40e_setup_rx_descriptors(struct i40e_ring *rx_ring)
rx_ring->xdp_prog = rx_ring->vsi->xdp_prog;
+ rx_ring->rx_bi = + kcalloc(rx_ring->count, sizeof(*rx_ring->rx_bi), GFP_KERNEL); + if (!rx_ring->rx_bi) + return -ENOMEM; + return 0; }
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h index 93ac201f68b8..af843e8169f7 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h @@ -465,7 +465,6 @@ int __i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size); bool __i40e_chk_linearize(struct sk_buff *skb); int i40e_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames, u32 flags); -int i40e_alloc_rx_bi(struct i40e_ring *rx_ring);
/** * i40e_get_head - Retrieve head from head writeback diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c index 75e4a698c3db..7f1226123629 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c +++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c @@ -9,14 +9,6 @@ #include "i40e_txrx_common.h" #include "i40e_xsk.h"
-int i40e_alloc_rx_bi_zc(struct i40e_ring *rx_ring) -{ - unsigned long sz = sizeof(*rx_ring->rx_bi_zc) * rx_ring->count; - - rx_ring->rx_bi_zc = kzalloc(sz, GFP_KERNEL); - return rx_ring->rx_bi_zc ? 0 : -ENOMEM; -} - void i40e_clear_rx_bi_zc(struct i40e_ring *rx_ring) { memset(rx_ring->rx_bi_zc, 0, @@ -28,6 +20,58 @@ static struct xdp_buff **i40e_rx_bi(struct i40e_ring *rx_ring, u32 idx) return &rx_ring->rx_bi_zc[idx]; }
+/** + * i40e_realloc_rx_xdp_bi - reallocate SW ring for either XSK or normal buffer + * @rx_ring: Current rx ring + * @pool_present: is pool for XSK present + * + * Try allocating memory and return ENOMEM, if failed to allocate. + * If allocation was successful, substitute buffer with allocated one. + * Returns 0 on success, negative on failure + */ +static int i40e_realloc_rx_xdp_bi(struct i40e_ring *rx_ring, bool pool_present) +{ + size_t elem_size = pool_present ? sizeof(*rx_ring->rx_bi_zc) : + sizeof(*rx_ring->rx_bi); + void *sw_ring = kcalloc(rx_ring->count, elem_size, GFP_KERNEL); + + if (!sw_ring) + return -ENOMEM; + + if (pool_present) { + kfree(rx_ring->rx_bi); + rx_ring->rx_bi = NULL; + rx_ring->rx_bi_zc = sw_ring; + } else { + kfree(rx_ring->rx_bi_zc); + rx_ring->rx_bi_zc = NULL; + rx_ring->rx_bi = sw_ring; + } + return 0; +} + +/** + * i40e_realloc_rx_bi_zc - reallocate rx SW rings + * @vsi: Current VSI + * @zc: is zero copy set + * + * Reallocate buffer for rx_rings that might be used by XSK. + * XDP requires more memory, than rx_buf provides. + * Returns 0 on success, negative on failure + */ +int i40e_realloc_rx_bi_zc(struct i40e_vsi *vsi, bool zc) +{ + struct i40e_ring *rx_ring; + unsigned long q; + + for_each_set_bit(q, vsi->af_xdp_zc_qps, vsi->alloc_queue_pairs) { + rx_ring = vsi->rx_rings[q]; + if (i40e_realloc_rx_xdp_bi(rx_ring, zc)) + return -ENOMEM; + } + return 0; +} + /** * i40e_xsk_pool_enable - Enable/associate an AF_XDP buffer pool to a * certain ring/qid @@ -68,6 +112,10 @@ static int i40e_xsk_pool_enable(struct i40e_vsi *vsi, if (err) return err;
+ err = i40e_realloc_rx_xdp_bi(vsi->rx_rings[qid], true); + if (err) + return err; + err = i40e_queue_pair_enable(vsi, qid); if (err) return err; @@ -112,6 +160,9 @@ static int i40e_xsk_pool_disable(struct i40e_vsi *vsi, u16 qid) xsk_pool_dma_unmap(pool, I40E_RX_DMA_ATTR);
if (if_running) { + err = i40e_realloc_rx_xdp_bi(vsi->rx_rings[qid], false); + if (err) + return err; err = i40e_queue_pair_enable(vsi, qid); if (err) return err; diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.h b/drivers/net/ethernet/intel/i40e/i40e_xsk.h index 7adfd8539247..36f5b6d20601 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_xsk.h +++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.h @@ -17,7 +17,7 @@ int i40e_clean_rx_irq_zc(struct i40e_ring *rx_ring, int budget);
bool i40e_clean_xdp_tx_irq(struct i40e_vsi *vsi, struct i40e_ring *tx_ring); int i40e_xsk_wakeup(struct net_device *dev, u32 queue_id, u32 flags); -int i40e_alloc_rx_bi_zc(struct i40e_ring *rx_ring); +int i40e_realloc_rx_bi_zc(struct i40e_vsi *vsi, bool zc); void i40e_clear_rx_bi_zc(struct i40e_ring *rx_ring);
#endif /* _I40E_XSK_H_ */
From: José Expósito jose.exposito89@gmail.com
[ Upstream commit bb5f0c855dcfc893ae5ed90e4c646bde9e4498bf ]
Under certain conditions the Magic Trackpad can group 2 reports in a single packet. The packet is split and the raw event function is invoked recursively for each part.
However, after processing each part, the BTN_MOUSE status is updated, sending multiple click events. [1]
Return after processing double reports to avoid this issue.
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/811 # [1] Fixes: a462230e16ac ("HID: magicmouse: enable Magic Trackpad support") Reported-by: Nulo git@nulo.in Signed-off-by: José Expósito jose.exposito89@gmail.com Signed-off-by: Benjamin Tissoires benjamin.tissoires@redhat.com Link: https://lore.kernel.org/r/20221009182747.90730-1-jose.exposito89@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-magicmouse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index fc4c07459753..28158d2f2352 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -387,7 +387,7 @@ static int magicmouse_raw_event(struct hid_device *hdev, magicmouse_raw_event(hdev, report, data + 2, data[1]); magicmouse_raw_event(hdev, report, data + 2 + data[1], size - 2 - data[1]); - break; + return 0; default: return 0; }
From: Jonathan Cooper jonathan.s.cooper@amd.com
[ Upstream commit a8aed7b35becfd21f22a77c7014029ea837b018f ]
Changing a VF's mac address through the VF (rather than via the PF) fails with EPERM because the latter part of efx_ef10_set_mac_address attempts to change the vport mac address list as the VF. Even with this fixed it still fails with EBUSY because the vadaptor is still assigned on the VF - the vadaptor reassignment must be within a section where the VF has torn down its state.
A major reason this has broken is because we have two functions that ostensibly do the same thing - have a PF and VF cooperate to change a VF mac address. Rather than do this, if we are changing the mac of a VF that has a link to the PF in the same VM then simply call sriov_set_vf_mac instead, which is a proven working function that does that.
If there is no PF available, or that fails non-fatally, then attempt to change the VF's mac address as we would a PF, without updating the PF's data.
Test case: Create a VF: echo 1 > /sys/class/net/<if>/device/sriov_numvfs Set the mac address of the VF directly: ip link set <vf> addr 00:11:22:33:44:55 Set the MAC address of the VF via the PF: ip link set <pf> vf 0 mac 00:11:22:33:44:66 Without this patch the last command will fail with ENOENT.
Signed-off-by: Jonathan Cooper jonathan.s.cooper@amd.com Reported-by: Íñigo Huguet ihuguet@redhat.com Fixes: 910c8789a777 ("set the MAC address using MC_CMD_VADAPTOR_SET_MAC") Acked-by: Edward Cree ecree.xilinx@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sfc/ef10.c | 58 ++++++++++++++------------------- 1 file changed, 24 insertions(+), 34 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index 5b7413305be6..eb1be7302082 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -3255,6 +3255,30 @@ static int efx_ef10_set_mac_address(struct efx_nic *efx) bool was_enabled = efx->port_enabled; int rc;
+#ifdef CONFIG_SFC_SRIOV + /* If this function is a VF and we have access to the parent PF, + * then use the PF control path to attempt to change the VF MAC address. + */ + if (efx->pci_dev->is_virtfn && efx->pci_dev->physfn) { + struct efx_nic *efx_pf = pci_get_drvdata(efx->pci_dev->physfn); + struct efx_ef10_nic_data *nic_data = efx->nic_data; + u8 mac[ETH_ALEN]; + + /* net_dev->dev_addr can be zeroed by efx_net_stop in + * efx_ef10_sriov_set_vf_mac, so pass in a copy. + */ + ether_addr_copy(mac, efx->net_dev->dev_addr); + + rc = efx_ef10_sriov_set_vf_mac(efx_pf, nic_data->vf_index, mac); + if (!rc) + return 0; + + netif_dbg(efx, drv, efx->net_dev, + "Updating VF mac via PF failed (%d), setting directly\n", + rc); + } +#endif + efx_device_detach_sync(efx); efx_net_stop(efx->net_dev);
@@ -3277,40 +3301,6 @@ static int efx_ef10_set_mac_address(struct efx_nic *efx) efx_net_open(efx->net_dev); efx_device_attach_if_not_resetting(efx);
-#ifdef CONFIG_SFC_SRIOV - if (efx->pci_dev->is_virtfn && efx->pci_dev->physfn) { - struct efx_ef10_nic_data *nic_data = efx->nic_data; - struct pci_dev *pci_dev_pf = efx->pci_dev->physfn; - - if (rc == -EPERM) { - struct efx_nic *efx_pf; - - /* Switch to PF and change MAC address on vport */ - efx_pf = pci_get_drvdata(pci_dev_pf); - - rc = efx_ef10_sriov_set_vf_mac(efx_pf, - nic_data->vf_index, - efx->net_dev->dev_addr); - } else if (!rc) { - struct efx_nic *efx_pf = pci_get_drvdata(pci_dev_pf); - struct efx_ef10_nic_data *nic_data = efx_pf->nic_data; - unsigned int i; - - /* MAC address successfully changed by VF (with MAC - * spoofing) so update the parent PF if possible. - */ - for (i = 0; i < efx_pf->vf_count; ++i) { - struct ef10_vf *vf = nic_data->vf + i; - - if (vf->efx == efx) { - ether_addr_copy(vf->mac, - efx->net_dev->dev_addr); - return 0; - } - } - } - } else -#endif if (rc == -EPERM) { netif_err(efx, drv, efx->net_dev, "Cannot change MAC address; use sfboot to enable"
From: Xiaobo Liu cppcoffee@gmail.com
[ Upstream commit d8bde3bf7f82dac5fc68a62c2816793a12cafa2a ]
Then the input contains '\0' or '\n', proc_mpc_write has read them, so the return value needs +1.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xiaobo Liu cppcoffee@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/atm/mpoa_proc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/atm/mpoa_proc.c b/net/atm/mpoa_proc.c index 829db9eba0cb..aaf64b953915 100644 --- a/net/atm/mpoa_proc.c +++ b/net/atm/mpoa_proc.c @@ -219,11 +219,12 @@ static ssize_t proc_mpc_write(struct file *file, const char __user *buff, if (!page) return -ENOMEM;
- for (p = page, len = 0; len < nbytes; p++, len++) { + for (p = page, len = 0; len < nbytes; p++) { if (get_user(*p, buff++)) { free_page((unsigned long)page); return -EFAULT; } + len += 1; if (*p == '\0' || *p == '\n') break; }
From: Harini Katakam harini.katakam@amd.com
[ Upstream commit 0c9efbd5c50c64ead434960a404c9c9a097b0403 ]
When RX strap in HW is not set to MODE 3 or 4, bit 7 and 8 in CF4 register should be set. The former is already handled in dp83867_config_init; add the latter in SGMII specific initialization.
Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Signed-off-by: Harini Katakam harini.katakam@amd.com Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/dp83867.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index f86acad0aad4..c8031e297faf 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -757,6 +757,14 @@ static int dp83867_config_init(struct phy_device *phydev) else val &= ~DP83867_SGMII_TYPE; phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL, val); + + /* This is a SW workaround for link instability if RX_CTRL is + * not strapped to mode 3 or 4 in HW. This is required for SGMII + * in addition to clearing bit 7, handled above. + */ + if (dp83867->rxctrl_strap_quirk) + phy_set_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, + BIT(8)); }
val = phy_read(phydev, DP83867_CFG3);
From: Kuniyuki Iwashima kuniyu@amazon.co.jp
[ Upstream commit 5c040eaf5d1753aafe12989ca712175df0b9c436 ]
As noted in the following commit, a closed listener has to hold the reference to the reuseport group for socket migration. This patch adds a field (num_closed_socks) to struct sock_reuseport to manage closed sockets within the same reuseport group. Moreover, this and the following commits introduce some helper functions to split socks[] into two sections and keep TCP_LISTEN and TCP_CLOSE sockets in each section. Like a double-ended queue, we will place TCP_LISTEN sockets from the front and TCP_CLOSE sockets from the end.
TCP_LISTEN----------> <-------TCP_CLOSE +---+---+ --- +---+ --- +---+ --- +---+ | 0 | 1 | ... | i | ... | j | ... | k | +---+---+ --- +---+ --- +---+ --- +---+
i = num_socks - 1 j = max_socks - num_closed_socks k = max_socks - 1
This patch also extends reuseport_add_sock() and reuseport_grow() to support num_closed_socks.
Signed-off-by: Kuniyuki Iwashima kuniyu@amazon.co.jp Signed-off-by: Daniel Borkmann daniel@iogearbox.net Reviewed-by: Eric Dumazet edumazet@google.com Acked-by: Martin KaFai Lau kafai@fb.com Link: https://lore.kernel.org/bpf/20210612123224.12525-3-kuniyu@amazon.co.jp Stable-dep-of: 69421bf98482 ("udp: Update reuse->has_conns under reuseport_lock.") Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/sock_reuseport.h | 5 ++- net/core/sock_reuseport.c | 75 +++++++++++++++++++++++++++--------- 2 files changed, 60 insertions(+), 20 deletions(-)
diff --git a/include/net/sock_reuseport.h b/include/net/sock_reuseport.h index 505f1e18e9bf..0e558ca7afbf 100644 --- a/include/net/sock_reuseport.h +++ b/include/net/sock_reuseport.h @@ -13,8 +13,9 @@ extern spinlock_t reuseport_lock; struct sock_reuseport { struct rcu_head rcu;
- u16 max_socks; /* length of socks */ - u16 num_socks; /* elements in socks */ + u16 max_socks; /* length of socks */ + u16 num_socks; /* elements in socks */ + u16 num_closed_socks; /* closed elements in socks */ /* The last synq overflow event timestamp of this * reuse->socks[] group. */ diff --git a/net/core/sock_reuseport.c b/net/core/sock_reuseport.c index b065f0a103ed..f478c65a281b 100644 --- a/net/core/sock_reuseport.c +++ b/net/core/sock_reuseport.c @@ -18,6 +18,49 @@ DEFINE_SPINLOCK(reuseport_lock);
static DEFINE_IDA(reuseport_ida);
+static int reuseport_sock_index(struct sock *sk, + const struct sock_reuseport *reuse, + bool closed) +{ + int left, right; + + if (!closed) { + left = 0; + right = reuse->num_socks; + } else { + left = reuse->max_socks - reuse->num_closed_socks; + right = reuse->max_socks; + } + + for (; left < right; left++) + if (reuse->socks[left] == sk) + return left; + return -1; +} + +static void __reuseport_add_sock(struct sock *sk, + struct sock_reuseport *reuse) +{ + reuse->socks[reuse->num_socks] = sk; + /* paired with smp_rmb() in reuseport_select_sock() */ + smp_wmb(); + reuse->num_socks++; +} + +static bool __reuseport_detach_sock(struct sock *sk, + struct sock_reuseport *reuse) +{ + int i = reuseport_sock_index(sk, reuse, false); + + if (i == -1) + return false; + + reuse->socks[i] = reuse->socks[reuse->num_socks - 1]; + reuse->num_socks--; + + return true; +} + static struct sock_reuseport *__reuseport_alloc(unsigned int max_socks) { unsigned int size = sizeof(struct sock_reuseport) + @@ -72,9 +115,9 @@ int reuseport_alloc(struct sock *sk, bool bind_inany) }
reuse->reuseport_id = id; + reuse->bind_inany = bind_inany; reuse->socks[0] = sk; reuse->num_socks = 1; - reuse->bind_inany = bind_inany; rcu_assign_pointer(sk->sk_reuseport_cb, reuse);
out: @@ -98,6 +141,7 @@ static struct sock_reuseport *reuseport_grow(struct sock_reuseport *reuse) return NULL;
more_reuse->num_socks = reuse->num_socks; + more_reuse->num_closed_socks = reuse->num_closed_socks; more_reuse->prog = reuse->prog; more_reuse->reuseport_id = reuse->reuseport_id; more_reuse->bind_inany = reuse->bind_inany; @@ -105,9 +149,13 @@ static struct sock_reuseport *reuseport_grow(struct sock_reuseport *reuse)
memcpy(more_reuse->socks, reuse->socks, reuse->num_socks * sizeof(struct sock *)); + memcpy(more_reuse->socks + + (more_reuse->max_socks - more_reuse->num_closed_socks), + reuse->socks + (reuse->max_socks - reuse->num_closed_socks), + reuse->num_closed_socks * sizeof(struct sock *)); more_reuse->synq_overflow_ts = READ_ONCE(reuse->synq_overflow_ts);
- for (i = 0; i < reuse->num_socks; ++i) + for (i = 0; i < reuse->max_socks; ++i) rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb, more_reuse);
@@ -158,7 +206,7 @@ int reuseport_add_sock(struct sock *sk, struct sock *sk2, bool bind_inany) return -EBUSY; }
- if (reuse->num_socks == reuse->max_socks) { + if (reuse->num_socks + reuse->num_closed_socks == reuse->max_socks) { reuse = reuseport_grow(reuse); if (!reuse) { spin_unlock_bh(&reuseport_lock); @@ -166,10 +214,7 @@ int reuseport_add_sock(struct sock *sk, struct sock *sk2, bool bind_inany) } }
- reuse->socks[reuse->num_socks] = sk; - /* paired with smp_rmb() in reuseport_select_sock() */ - smp_wmb(); - reuse->num_socks++; + __reuseport_add_sock(sk, reuse); rcu_assign_pointer(sk->sk_reuseport_cb, reuse);
spin_unlock_bh(&reuseport_lock); @@ -183,7 +228,6 @@ EXPORT_SYMBOL(reuseport_add_sock); void reuseport_detach_sock(struct sock *sk) { struct sock_reuseport *reuse; - int i;
spin_lock_bh(&reuseport_lock); reuse = rcu_dereference_protected(sk->sk_reuseport_cb, @@ -200,16 +244,11 @@ void reuseport_detach_sock(struct sock *sk) bpf_sk_reuseport_detach(sk);
rcu_assign_pointer(sk->sk_reuseport_cb, NULL); + __reuseport_detach_sock(sk, reuse); + + if (reuse->num_socks + reuse->num_closed_socks == 0) + call_rcu(&reuse->rcu, reuseport_free_rcu);
- for (i = 0; i < reuse->num_socks; i++) { - if (reuse->socks[i] == sk) { - reuse->socks[i] = reuse->socks[reuse->num_socks - 1]; - reuse->num_socks--; - if (reuse->num_socks == 0) - call_rcu(&reuse->rcu, reuseport_free_rcu); - break; - } - } spin_unlock_bh(&reuseport_lock); } EXPORT_SYMBOL(reuseport_detach_sock); @@ -274,7 +313,7 @@ struct sock *reuseport_select_sock(struct sock *sk, prog = rcu_dereference(reuse->prog); socks = READ_ONCE(reuse->num_socks); if (likely(socks)) { - /* paired with smp_wmb() in reuseport_add_sock() */ + /* paired with smp_wmb() in __reuseport_add_sock() */ smp_rmb();
if (!prog || !skb)
From: Kuniyuki Iwashima kuniyu@amazon.com
[ Upstream commit 69421bf98482d089e50799f45e48b25ce4a8d154 ]
When we call connect() for a UDP socket in a reuseport group, we have to update sk->sk_reuseport_cb->has_conns to 1. Otherwise, the kernel could select a unconnected socket wrongly for packets sent to the connected socket.
However, the current way to set has_conns is illegal and possible to trigger that problem. reuseport_has_conns() changes has_conns under rcu_read_lock(), which upgrades the RCU reader to the updater. Then, it must do the update under the updater's lock, reuseport_lock, but it doesn't for now.
For this reason, there is a race below where we fail to set has_conns resulting in the wrong socket selection. To avoid the race, let's split the reader and updater with proper locking.
cpu1 cpu2 +----+ +----+
__ip[46]_datagram_connect() reuseport_grow() . . |- reuseport_has_conns(sk, true) |- more_reuse = __reuseport_alloc(more_socks_size) | . | | |- rcu_read_lock() | |- reuse = rcu_dereference(sk->sk_reuseport_cb) | | | | | /* reuse->has_conns == 0 here */ | | |- more_reuse->has_conns = reuse->has_conns | |- reuse->has_conns = 1 | /* more_reuse->has_conns SHOULD BE 1 HERE */ | | | | | |- rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb, | | | more_reuse) | `- rcu_read_unlock() `- kfree_rcu(reuse, rcu) | |- sk->sk_state = TCP_ESTABLISHED
Note the likely(reuse) in reuseport_has_conns_set() is always true, but we put the test there for ease of review. [0]
For the record, usually, sk_reuseport_cb is changed under lock_sock(). The only exception is reuseport_grow() & TCP reqsk migration case.
1) shutdown() TCP listener, which is moved into the latter part of reuse->socks[] to migrate reqsk.
2) New listen() overflows reuse->socks[] and call reuseport_grow().
3) reuse->max_socks overflows u16 with the new listener.
4) reuseport_grow() pops the old shutdown()ed listener from the array and update its sk->sk_reuseport_cb as NULL without lock_sock().
shutdown()ed TCP sk->sk_reuseport_cb can be changed without lock_sock(), but, reuseport_has_conns_set() is called only for UDP under lock_sock(), so likely(reuse) never be false in reuseport_has_conns_set().
[0]: https://lore.kernel.org/netdev/CANn89iLja=eQHbsM_Ta2sQF0tOGU8vAGrh_izRuuHjuO...
Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets") Signed-off-by: Kuniyuki Iwashima kuniyu@amazon.com Link: https://lore.kernel.org/r/20221014182625.89913-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/sock_reuseport.h | 11 +++++------ net/core/sock_reuseport.c | 16 ++++++++++++++++ net/ipv4/datagram.c | 2 +- net/ipv4/udp.c | 2 +- net/ipv6/datagram.c | 2 +- net/ipv6/udp.c | 2 +- 6 files changed, 25 insertions(+), 10 deletions(-)
diff --git a/include/net/sock_reuseport.h b/include/net/sock_reuseport.h index 0e558ca7afbf..6348c6f26903 100644 --- a/include/net/sock_reuseport.h +++ b/include/net/sock_reuseport.h @@ -39,21 +39,20 @@ extern struct sock *reuseport_select_sock(struct sock *sk, extern int reuseport_attach_prog(struct sock *sk, struct bpf_prog *prog); extern int reuseport_detach_prog(struct sock *sk);
-static inline bool reuseport_has_conns(struct sock *sk, bool set) +static inline bool reuseport_has_conns(struct sock *sk) { struct sock_reuseport *reuse; bool ret = false;
rcu_read_lock(); reuse = rcu_dereference(sk->sk_reuseport_cb); - if (reuse) { - if (set) - reuse->has_conns = 1; - ret = reuse->has_conns; - } + if (reuse && reuse->has_conns) + ret = true; rcu_read_unlock();
return ret; }
+void reuseport_has_conns_set(struct sock *sk); + #endif /* _SOCK_REUSEPORT_H */ diff --git a/net/core/sock_reuseport.c b/net/core/sock_reuseport.c index f478c65a281b..364cf6c6912b 100644 --- a/net/core/sock_reuseport.c +++ b/net/core/sock_reuseport.c @@ -18,6 +18,22 @@ DEFINE_SPINLOCK(reuseport_lock);
static DEFINE_IDA(reuseport_ida);
+void reuseport_has_conns_set(struct sock *sk) +{ + struct sock_reuseport *reuse; + + if (!rcu_access_pointer(sk->sk_reuseport_cb)) + return; + + spin_lock_bh(&reuseport_lock); + reuse = rcu_dereference_protected(sk->sk_reuseport_cb, + lockdep_is_held(&reuseport_lock)); + if (likely(reuse)) + reuse->has_conns = 1; + spin_unlock_bh(&reuseport_lock); +} +EXPORT_SYMBOL(reuseport_has_conns_set); + static int reuseport_sock_index(struct sock *sk, const struct sock_reuseport *reuse, bool closed) diff --git a/net/ipv4/datagram.c b/net/ipv4/datagram.c index 4a8550c49202..112c6e892d30 100644 --- a/net/ipv4/datagram.c +++ b/net/ipv4/datagram.c @@ -70,7 +70,7 @@ int __ip4_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len } inet->inet_daddr = fl4->daddr; inet->inet_dport = usin->sin_port; - reuseport_has_conns(sk, true); + reuseport_has_conns_set(sk); sk->sk_state = TCP_ESTABLISHED; sk_set_txhash(sk); inet->inet_id = prandom_u32(); diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 4446aa8237ff..b093daaa3deb 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -446,7 +446,7 @@ static struct sock *udp4_lib_lookup2(struct net *net, result = lookup_reuseport(net, sk, skb, saddr, sport, daddr, hnum); /* Fall back to scoring if group has connections */ - if (result && !reuseport_has_conns(sk, false)) + if (result && !reuseport_has_conns(sk)) return result;
result = result ? : sk; diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 206f66310a88..f4559e5bc84b 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -256,7 +256,7 @@ int __ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, goto out; }
- reuseport_has_conns(sk, true); + reuseport_has_conns_set(sk); sk->sk_state = TCP_ESTABLISHED; sk_set_txhash(sk); out: diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 9b504bf49214..514e6a55959f 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -179,7 +179,7 @@ static struct sock *udp6_lib_lookup2(struct net *net, result = lookup_reuseport(net, sk, skb, saddr, sport, daddr, hnum); /* Fall back to scoring if group has connections */ - if (result && !reuseport_has_conns(sk, false)) + if (result && !reuseport_has_conns(sk)) return result;
result = result ? : sk;
From: Zhang Xiaoxu zhangxiaoxu5@huawei.com
[ Upstream commit 9a97df404a402fe1174d2d1119f87ff2a0ca2fe9 ]
If the file is used by swap, before return -EOPNOTSUPP, should free the xid, otherwise, the xid will be leaked.
Fixes: 4e8aea30f775 ("smb3: enable swap on SMB3 mounts") Reviewed-by: Paulo Alcantara (SUSE) pc@cjr.nz Signed-off-by: Zhang Xiaoxu zhangxiaoxu5@huawei.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/cifsfs.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index bc957e6ca48b..f442ef8b65da 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1221,8 +1221,11 @@ static ssize_t cifs_copy_file_range(struct file *src_file, loff_t off, ssize_t rc; struct cifsFileInfo *cfile = dst_file->private_data;
- if (cfile->swapfile) - return -EOPNOTSUPP; + if (cfile->swapfile) { + rc = -EOPNOTSUPP; + free_xid(xid); + return rc; + }
rc = cifs_file_copychunk_range(xid, src_file, off, dst_file, destoff, len, flags);
From: Zhang Xiaoxu zhangxiaoxu5@huawei.com
[ Upstream commit 575e079c782b9862ec2626403922d041a42e6ed6 ]
If not flock, before return -ENOLCK, should free the xid, otherwise, the xid will be leaked.
Fixes: d0677992d2af ("cifs: add support for flock") Reviewed-by: Paulo Alcantara (SUSE) pc@cjr.nz Signed-off-by: Zhang Xiaoxu zhangxiaoxu5@huawei.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/file.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/fs/cifs/file.c b/fs/cifs/file.c index a648146e49cf..144064dc0d38 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1735,11 +1735,13 @@ int cifs_flock(struct file *file, int cmd, struct file_lock *fl) struct cifsFileInfo *cfile; __u32 type;
- rc = -EACCES; xid = get_xid();
- if (!(fl->fl_flags & FL_FLOCK)) - return -ENOLCK; + if (!(fl->fl_flags & FL_FLOCK)) { + rc = -ENOLCK; + free_xid(xid); + return rc; + }
cfile = (struct cifsFileInfo *)file->private_data; tcon = tlink_tcon(cfile->tlink); @@ -1758,8 +1760,9 @@ int cifs_flock(struct file *file, int cmd, struct file_lock *fl) * if no lock or unlock then nothing to do since we do not * know what it is */ + rc = -EOPNOTSUPP; free_xid(xid); - return -EOPNOTSUPP; + return rc; }
rc = cifs_setlk(file, fl, type, wait_flag, posix_lck, lock, unlock,
From: Zhang Xiaoxu zhangxiaoxu5@huawei.com
[ Upstream commit e909d054bdea75ef1ec48c18c5936affdaecbb2c ]
Before return, should free the xid, otherwise, the xid will be leaked.
Fixes: d70e9fa55884 ("cifs: try opening channels after mounting") Reviewed-by: Paulo Alcantara (SUSE) pc@cjr.nz Signed-off-by: Zhang Xiaoxu zhangxiaoxu5@huawei.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/sess.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index d58c5ffeca0d..cf6fd138d8d5 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -306,6 +306,7 @@ cifs_ses_add_channel(struct cifs_ses *ses, struct cifs_server_iface *iface) cifs_put_tcp_session(chan->server, 0); unload_nls(vol.local_nls);
+ free_xid(xid); return rc; }
From: Eric Dumazet edumazet@google.com
[ Upstream commit d8b57135fd9ffe9a5b445350a686442a531c5339 ]
syzbot got a crash [1] in skb_clone(), caused by a bug in hsr_get_untagged_frame().
When/if create_stripped_skb_hsr() returns NULL, we must not attempt to call skb_clone().
While we are at it, replace a WARN_ONCE() by netdev_warn_once().
[1] general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 1 PID: 754 Comm: syz-executor.0 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 RIP: 0010:skb_clone+0x108/0x3c0 net/core/skbuff.c:1641 Code: 93 02 00 00 49 83 7c 24 28 00 0f 85 e9 00 00 00 e8 5d 4a 29 fa 4c 8d 75 7e 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 4c 89 f2 83 e2 07 38 d0 7f 08 84 c0 0f 85 9e 01 00 00 RSP: 0018:ffffc90003ccf4e0 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: ffffc90003ccf5f8 RCX: ffffc9000c24b000 RDX: 000000000000000f RSI: ffffffff8751cb13 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000000000000f0 R09: 0000000000000140 R10: fffffbfff181d972 R11: 0000000000000000 R12: ffff888161fc3640 R13: 0000000000000a20 R14: 000000000000007e R15: ffffffff8dc5f620 FS: 00007feb621e4700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb621e3ff8 CR3: 00000001643a9000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> hsr_get_untagged_frame+0x4e/0x610 net/hsr/hsr_forward.c:164 hsr_forward_do net/hsr/hsr_forward.c:461 [inline] hsr_forward_skb+0xcca/0x1d50 net/hsr/hsr_forward.c:623 hsr_handle_frame+0x588/0x7c0 net/hsr/hsr_slave.c:69 __netif_receive_skb_core+0x9fe/0x38f0 net/core/dev.c:5379 __netif_receive_skb_one_core+0xae/0x180 net/core/dev.c:5483 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5599 netif_receive_skb_internal net/core/dev.c:5685 [inline] netif_receive_skb+0x12f/0x8d0 net/core/dev.c:5744 tun_rx_batched+0x4ab/0x7a0 drivers/net/tun.c:1544 tun_get_user+0x2686/0x3a00 drivers/net/tun.c:1995 tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2025 call_write_iter include/linux/fs.h:2187 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9e9/0xdd0 fs/read_write.c:584 ksys_write+0x127/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: f266a683a480 ("net/hsr: Better frame dispatch") Reported-by: syzbot syzkaller@googlegroups.com Signed-off-by: Eric Dumazet edumazet@google.com Link: https://lore.kernel.org/r/20221017165928.2150130-1-edumazet@google.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/hsr/hsr_forward.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/net/hsr/hsr_forward.c b/net/hsr/hsr_forward.c index baf4765be6d7..908324b46328 100644 --- a/net/hsr/hsr_forward.c +++ b/net/hsr/hsr_forward.c @@ -108,15 +108,15 @@ struct sk_buff *hsr_get_untagged_frame(struct hsr_frame_info *frame, struct hsr_port *port) { if (!frame->skb_std) { - if (frame->skb_hsr) { + if (frame->skb_hsr) frame->skb_std = create_stripped_skb_hsr(frame->skb_hsr, frame); - } else { - /* Unexpected */ - WARN_ONCE(1, "%s:%d: Unexpected frame received (port_src %s)\n", - __FILE__, __LINE__, port->dev->name); + else + netdev_warn_once(port->dev, + "Unexpected frame received in hsr_get_untagged_frame()\n"); + + if (!frame->skb_std) return NULL; - } }
return skb_clone(frame->skb_std, GFP_ATOMIC);
From: Brett Creeley brett@pensando.io
[ Upstream commit aa1d7e1267c12e07d979aa34c613716a89029db2 ]
It's possible that the driver will dereference a qcq that doesn't exist when calling ionic_reconfigure_queues(), which causes a page fault BUG.
If a reduction in the number of queues is followed by a different reconfig such as changing the ring size, the driver can hit a NULL pointer when trying to clean up non-existent queues.
Fix this by checking to make sure both the qcqs array and qcq entry exists bofore trying to use and free the entry.
Fixes: 101b40a0171f ("ionic: change queue count with no reset") Signed-off-by: Brett Creeley brett@pensando.io Signed-off-by: Shannon Nelson snelson@pensando.io Link: https://lore.kernel.org/r/20221017233123.15869-1-snelson@pensando.io Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index e42520f909fe..cb12d0171517 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -2383,11 +2383,15 @@ int ionic_reconfigure_queues(struct ionic_lif *lif, * than the full array, but leave the qcq shells in place */ for (i = lif->nxqs; i < lif->ionic->ntxqs_per_lif; i++) { - lif->txqcqs[i]->flags &= ~IONIC_QCQ_F_INTR; - ionic_qcq_free(lif, lif->txqcqs[i]); + if (lif->txqcqs && lif->txqcqs[i]) { + lif->txqcqs[i]->flags &= ~IONIC_QCQ_F_INTR; + ionic_qcq_free(lif, lif->txqcqs[i]); + }
- lif->rxqcqs[i]->flags &= ~IONIC_QCQ_F_INTR; - ionic_qcq_free(lif, lif->rxqcqs[i]); + if (lif->rxqcqs && lif->rxqcqs[i]) { + lif->rxqcqs[i]->flags &= ~IONIC_QCQ_F_INTR; + ionic_qcq_free(lif, lif->rxqcqs[i]); + } }
return err;
From: Hannes Reinecke hare@suse.de
[ Upstream commit ed7770f6628691c13c9423bce7eee7cff2399c12 ]
The original design to use device-managed resource allocation doesn't really work as the NVMe controller has a vastly different lifetime than the hwmon sysfs attributes, causing warning about duplicate sysfs entries upon reconnection. This patch reworks the hwmon allocation to avoid device-managed resource allocation, and uses the NVMe controller as parent for the sysfs attributes.
Cc: Guenter Roeck linux@roeck-us.net Signed-off-by: Hannes Reinecke hare@suse.de Tested-by: Enzo Matsumiya ematsumiya@suse.de Tested-by: Daniel Wagner dwagner@suse.de Signed-off-by: Christoph Hellwig hch@lst.de Stable-dep-of: c94b7f9bab22 ("nvme-hwmon: kmalloc the NVME SMART log buffer") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/core.c | 1 + drivers/nvme/host/hwmon.c | 31 +++++++++++++++++++++---------- drivers/nvme/host/nvme.h | 8 ++++++++ 3 files changed, 30 insertions(+), 10 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index e9c13804760e..51e5c12988fe 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -4485,6 +4485,7 @@ EXPORT_SYMBOL_GPL(nvme_start_ctrl);
void nvme_uninit_ctrl(struct nvme_ctrl *ctrl) { + nvme_hwmon_exit(ctrl); nvme_fault_inject_fini(&ctrl->fault_inject); dev_pm_qos_hide_latency_tolerance(ctrl->device); cdev_device_del(&ctrl->cdev, ctrl->device); diff --git a/drivers/nvme/host/hwmon.c b/drivers/nvme/host/hwmon.c index 552dbc04567b..8f9e96986780 100644 --- a/drivers/nvme/host/hwmon.c +++ b/drivers/nvme/host/hwmon.c @@ -223,12 +223,12 @@ static const struct hwmon_chip_info nvme_hwmon_chip_info = {
int nvme_hwmon_init(struct nvme_ctrl *ctrl) { - struct device *dev = ctrl->dev; + struct device *dev = ctrl->device; struct nvme_hwmon_data *data; struct device *hwmon; int err;
- data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + data = kzalloc(sizeof(*data), GFP_KERNEL); if (!data) return 0;
@@ -237,19 +237,30 @@ int nvme_hwmon_init(struct nvme_ctrl *ctrl)
err = nvme_hwmon_get_smart_log(data); if (err) { - dev_warn(ctrl->device, - "Failed to read smart log (error %d)\n", err); - devm_kfree(dev, data); + dev_warn(dev, "Failed to read smart log (error %d)\n", err); + kfree(data); return err; }
- hwmon = devm_hwmon_device_register_with_info(dev, "nvme", data, - &nvme_hwmon_chip_info, - NULL); + hwmon = hwmon_device_register_with_info(dev, "nvme", + data, &nvme_hwmon_chip_info, + NULL); if (IS_ERR(hwmon)) { dev_warn(dev, "Failed to instantiate hwmon device\n"); - devm_kfree(dev, data); + kfree(data); } - + ctrl->hwmon_device = hwmon; return 0; } + +void nvme_hwmon_exit(struct nvme_ctrl *ctrl) +{ + if (ctrl->hwmon_device) { + struct nvme_hwmon_data *data = + dev_get_drvdata(ctrl->hwmon_device); + + hwmon_device_unregister(ctrl->hwmon_device); + ctrl->hwmon_device = NULL; + kfree(data); + } +} diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 58cf9e39d613..abae7ef2ac51 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -257,6 +257,9 @@ struct nvme_ctrl { struct rw_semaphore namespaces_rwsem; struct device ctrl_device; struct device *device; /* char device */ +#ifdef CONFIG_NVME_HWMON + struct device *hwmon_device; +#endif struct cdev cdev; struct work_struct reset_work; struct work_struct delete_work; @@ -876,11 +879,16 @@ static inline struct nvme_ns *nvme_get_ns_from_dev(struct device *dev)
#ifdef CONFIG_NVME_HWMON int nvme_hwmon_init(struct nvme_ctrl *ctrl); +void nvme_hwmon_exit(struct nvme_ctrl *ctrl); #else static inline int nvme_hwmon_init(struct nvme_ctrl *ctrl) { return 0; } + +static inline void nvme_hwmon_exit(struct nvme_ctrl *ctrl) +{ +} #endif
u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
From: Daniel Wagner dwagner@suse.de
[ Upstream commit 78570f8873c8cd44c12714c7fa7db2601ec5617d ]
The hwmon pointer wont be NULL if the registration fails. Though the exit code path will assign it to ctrl->hwmon_device. Later nvme_hwmon_exit() will try to free the invalid pointer. Avoid this by returning the error code from hwmon_device_register_with_info().
Fixes: ed7770f66286 ("nvme/hwmon: rework to avoid devm allocation") Signed-off-by: Daniel Wagner dwagner@suse.de Signed-off-by: Christoph Hellwig hch@lst.de Stable-dep-of: c94b7f9bab22 ("nvme-hwmon: kmalloc the NVME SMART log buffer") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/hwmon.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/nvme/host/hwmon.c b/drivers/nvme/host/hwmon.c index 8f9e96986780..0a586d712920 100644 --- a/drivers/nvme/host/hwmon.c +++ b/drivers/nvme/host/hwmon.c @@ -248,6 +248,7 @@ int nvme_hwmon_init(struct nvme_ctrl *ctrl) if (IS_ERR(hwmon)) { dev_warn(dev, "Failed to instantiate hwmon device\n"); kfree(data); + return PTR_ERR(hwmon); } ctrl->hwmon_device = hwmon; return 0;
From: Christoph Hellwig hch@lst.de
[ Upstream commit 6b8cf94005187952f794c0c4ed3920a1e8accfa3 ]
An NVMe controller works perfectly fine even when the hwmon initialization fails. Stop returning errors that do not come from a controller reset from nvme_hwmon_init to handle this case consistently.
Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: Guenter Roeck linux@roeck-us.net Reviewed-by: Serge Semin fancer.lancer@gmail.com Stable-dep-of: c94b7f9bab22 ("nvme-hwmon: kmalloc the NVME SMART log buffer") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/core.c | 6 +++++- drivers/nvme/host/hwmon.c | 13 ++++++++----- 2 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 51e5c12988fe..3f106771d15b 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -3232,8 +3232,12 @@ int nvme_init_identify(struct nvme_ctrl *ctrl) return ret;
if (!ctrl->identified && !nvme_discovery_ctrl(ctrl)) { + /* + * Do not return errors unless we are in a controller reset, + * the controller works perfectly fine without hwmon. + */ ret = nvme_hwmon_init(ctrl); - if (ret < 0) + if (ret == -EINTR) return ret; }
diff --git a/drivers/nvme/host/hwmon.c b/drivers/nvme/host/hwmon.c index 0a586d712920..23918bb7bdca 100644 --- a/drivers/nvme/host/hwmon.c +++ b/drivers/nvme/host/hwmon.c @@ -230,7 +230,7 @@ int nvme_hwmon_init(struct nvme_ctrl *ctrl)
data = kzalloc(sizeof(*data), GFP_KERNEL); if (!data) - return 0; + return -ENOMEM;
data->ctrl = ctrl; mutex_init(&data->read_lock); @@ -238,8 +238,7 @@ int nvme_hwmon_init(struct nvme_ctrl *ctrl) err = nvme_hwmon_get_smart_log(data); if (err) { dev_warn(dev, "Failed to read smart log (error %d)\n", err); - kfree(data); - return err; + goto err_free_data; }
hwmon = hwmon_device_register_with_info(dev, "nvme", @@ -247,11 +246,15 @@ int nvme_hwmon_init(struct nvme_ctrl *ctrl) NULL); if (IS_ERR(hwmon)) { dev_warn(dev, "Failed to instantiate hwmon device\n"); - kfree(data); - return PTR_ERR(hwmon); + err = PTR_ERR(hwmon); + goto err_free_data; } ctrl->hwmon_device = hwmon; return 0; + +err_free_data: + kfree(data); + return err; }
void nvme_hwmon_exit(struct nvme_ctrl *ctrl)
From: Serge Semin Sergey.Semin@baikalelectronics.ru
[ Upstream commit c94b7f9bab22ac504f9153767676e659988575ad ]
Recent commit 52fde2c07da6 ("nvme: set dma alignment to dword") has caused a regression on our platform.
It turned out that the nvme_get_log() method invocation caused the nvme_hwmon_data structure instance corruption. In particular the nvme_hwmon_data.ctrl pointer was overwritten either with zeros or with garbage. After some research we discovered that the problem happened even before the actual NVME DMA execution, but during the buffer mapping. Since our platform is DMA-noncoherent, the mapping implied the cache-line invalidations or write-backs depending on the DMA-direction parameter. In case of the NVME SMART log getting the DMA was performed from-device-to-memory, thus the cache-invalidation was activated during the buffer mapping. Since the log-buffer isn't cache-line aligned, the cache-invalidation caused the neighbour data to be discarded. The neighbouring data turned to be the data surrounding the buffer in the framework of the nvme_hwmon_data structure.
In order to fix that we need to make sure that the whole log-buffer is defined within the cache-line-aligned memory region so the cache-invalidation procedure wouldn't involve the adjacent data. One of the option to guarantee that is to kmalloc the DMA-buffer [1]. Seeing the rest of the NVME core driver prefer that method it has been chosen to fix this problem too.
Note after a deeper researches we found out that the denoted commit wasn't a root cause of the problem. It just revealed the invalidity by activating the DMA-based NVME SMART log getting performed in the framework of the NVME hwmon driver. The problem was here since the initial commit of the driver.
[1] Documentation/core-api/dma-api-howto.rst
Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support") Signed-off-by: Serge Semin Sergey.Semin@baikalelectronics.ru Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/hwmon.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)
diff --git a/drivers/nvme/host/hwmon.c b/drivers/nvme/host/hwmon.c index 23918bb7bdca..9e6e56c20ec9 100644 --- a/drivers/nvme/host/hwmon.c +++ b/drivers/nvme/host/hwmon.c @@ -12,7 +12,7 @@
struct nvme_hwmon_data { struct nvme_ctrl *ctrl; - struct nvme_smart_log log; + struct nvme_smart_log *log; struct mutex read_lock; };
@@ -60,14 +60,14 @@ static int nvme_set_temp_thresh(struct nvme_ctrl *ctrl, int sensor, bool under, static int nvme_hwmon_get_smart_log(struct nvme_hwmon_data *data) { return nvme_get_log(data->ctrl, NVME_NSID_ALL, NVME_LOG_SMART, 0, - NVME_CSI_NVM, &data->log, sizeof(data->log), 0); + NVME_CSI_NVM, data->log, sizeof(*data->log), 0); }
static int nvme_hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long *val) { struct nvme_hwmon_data *data = dev_get_drvdata(dev); - struct nvme_smart_log *log = &data->log; + struct nvme_smart_log *log = data->log; int temp; int err;
@@ -163,7 +163,7 @@ static umode_t nvme_hwmon_is_visible(const void *_data, case hwmon_temp_max: case hwmon_temp_min: if ((!channel && data->ctrl->wctemp) || - (channel && data->log.temp_sensor[channel - 1])) { + (channel && data->log->temp_sensor[channel - 1])) { if (data->ctrl->quirks & NVME_QUIRK_NO_TEMP_THRESH_CHANGE) return 0444; @@ -176,7 +176,7 @@ static umode_t nvme_hwmon_is_visible(const void *_data, break; case hwmon_temp_input: case hwmon_temp_label: - if (!channel || data->log.temp_sensor[channel - 1]) + if (!channel || data->log->temp_sensor[channel - 1]) return 0444; break; default: @@ -232,13 +232,19 @@ int nvme_hwmon_init(struct nvme_ctrl *ctrl) if (!data) return -ENOMEM;
+ data->log = kzalloc(sizeof(*data->log), GFP_KERNEL); + if (!data->log) { + err = -ENOMEM; + goto err_free_data; + } + data->ctrl = ctrl; mutex_init(&data->read_lock);
err = nvme_hwmon_get_smart_log(data); if (err) { dev_warn(dev, "Failed to read smart log (error %d)\n", err); - goto err_free_data; + goto err_free_log; }
hwmon = hwmon_device_register_with_info(dev, "nvme", @@ -247,11 +253,13 @@ int nvme_hwmon_init(struct nvme_ctrl *ctrl) if (IS_ERR(hwmon)) { dev_warn(dev, "Failed to instantiate hwmon device\n"); err = PTR_ERR(hwmon); - goto err_free_data; + goto err_free_log; } ctrl->hwmon_device = hwmon; return 0;
+err_free_log: + kfree(data->log); err_free_data: kfree(data); return err; @@ -265,6 +273,7 @@ void nvme_hwmon_exit(struct nvme_ctrl *ctrl)
hwmon_device_unregister(ctrl->hwmon_device); ctrl->hwmon_device = NULL; + kfree(data->log); kfree(data); } }
From: Zhengchao Shao shaozhengchao@huawei.com
[ Upstream commit 51f9a8921ceacd7bf0d3f47fa867a64988ba1dcb ]
When the default qdisc is cake, if the qdisc of dev_queue fails to be inited during mqprio_init(), cake_reset() is invoked to clear resources. In this case, the tins is NULL, and it will cause gpf issue.
The process is as follows: qdisc_create_dflt() cake_init() q->tins = kvcalloc(...) --->failed, q->tins is NULL ... qdisc_put() ... cake_reset() ... cake_dequeue_one() b = &q->tins[...] --->q->tins is NULL
The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:cake_dequeue_one+0xc9/0x3c0 Call Trace: <TASK> cake_reset+0xb1/0x140 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f89e5122d04 </TASK>
Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc") Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com Acked-by: Toke Høiland-Jørgensen toke@toke.dk Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/sched/sch_cake.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c index c580139fcede..5dc7a3c310c9 100644 --- a/net/sched/sch_cake.c +++ b/net/sched/sch_cake.c @@ -2224,8 +2224,12 @@ static struct sk_buff *cake_dequeue(struct Qdisc *sch)
static void cake_reset(struct Qdisc *sch) { + struct cake_sched_data *q = qdisc_priv(sch); u32 c;
+ if (!q->tins) + return; + for (c = 0; c < CAKE_MAX_TINS; c++) cake_clear_tin(sch, c); }
From: Zhengchao Shao shaozhengchao@huawei.com
[ Upstream commit c19d893fbf3f2f8fa864ae39652c7fee939edde2 ]
qdisc_reset() is clearing qdisc->q.qlen and qdisc->qstats.backlog _after_ calling qdisc->ops->reset. There is no need to clear them again in the specific reset function.
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com Link: https://lore.kernel.org/r/20220824005231.345727-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni pabeni@redhat.com Stable-dep-of: 2a3fc78210b9 ("net: sched: sfb: fix null pointer access issue when sfb_init() fails") Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/sch_generic.h | 1 - net/sched/sch_atm.c | 1 - net/sched/sch_cbq.c | 1 - net/sched/sch_choke.c | 2 -- net/sched/sch_drr.c | 2 -- net/sched/sch_dsmark.c | 2 -- net/sched/sch_etf.c | 3 --- net/sched/sch_ets.c | 2 -- net/sched/sch_fq_codel.c | 2 -- net/sched/sch_fq_pie.c | 3 --- net/sched/sch_hfsc.c | 2 -- net/sched/sch_htb.c | 2 -- net/sched/sch_multiq.c | 1 - net/sched/sch_prio.c | 2 -- net/sched/sch_qfq.c | 2 -- net/sched/sch_red.c | 2 -- net/sched/sch_sfb.c | 2 -- net/sched/sch_skbprio.c | 3 --- net/sched/sch_taprio.c | 2 -- net/sched/sch_tbf.c | 2 -- net/sched/sch_teql.c | 1 - 21 files changed, 40 deletions(-)
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index bed2387af456..e7e8c318925d 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -1178,7 +1178,6 @@ static inline void __qdisc_reset_queue(struct qdisc_skb_head *qh) static inline void qdisc_reset_queue(struct Qdisc *sch) { __qdisc_reset_queue(&sch->q); - sch->qstats.backlog = 0; }
static inline struct Qdisc *qdisc_replace(struct Qdisc *sch, struct Qdisc *new, diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c index 1c281cc81f57..794c7377cd7e 100644 --- a/net/sched/sch_atm.c +++ b/net/sched/sch_atm.c @@ -575,7 +575,6 @@ static void atm_tc_reset(struct Qdisc *sch) pr_debug("atm_tc_reset(sch %p,[qdisc %p])\n", sch, p); list_for_each_entry(flow, &p->flows, list) qdisc_reset(flow->q); - sch->q.qlen = 0; }
static void atm_tc_destroy(struct Qdisc *sch) diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index 4a78fcf5d4f9..9a3dff02b7a2 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -1053,7 +1053,6 @@ cbq_reset(struct Qdisc *sch) cl->cpriority = cl->priority; } } - sch->q.qlen = 0; }
diff --git a/net/sched/sch_choke.c b/net/sched/sch_choke.c index 2adbd945bf15..25d2daaa8122 100644 --- a/net/sched/sch_choke.c +++ b/net/sched/sch_choke.c @@ -315,8 +315,6 @@ static void choke_reset(struct Qdisc *sch) rtnl_qdisc_drop(skb, sch); }
- sch->q.qlen = 0; - sch->qstats.backlog = 0; if (q->tab) memset(q->tab, 0, (q->tab_mask + 1) * sizeof(struct sk_buff *)); q->head = q->tail = 0; diff --git a/net/sched/sch_drr.c b/net/sched/sch_drr.c index dde564670ad8..08424aac6da8 100644 --- a/net/sched/sch_drr.c +++ b/net/sched/sch_drr.c @@ -443,8 +443,6 @@ static void drr_reset_qdisc(struct Qdisc *sch) qdisc_reset(cl->qdisc); } } - sch->qstats.backlog = 0; - sch->q.qlen = 0; }
static void drr_destroy_qdisc(struct Qdisc *sch) diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c index 76ed1a05ded2..a75bc7f80cd7 100644 --- a/net/sched/sch_dsmark.c +++ b/net/sched/sch_dsmark.c @@ -408,8 +408,6 @@ static void dsmark_reset(struct Qdisc *sch) pr_debug("%s(sch %p,[qdisc %p])\n", __func__, sch, p); if (p->q) qdisc_reset(p->q); - sch->qstats.backlog = 0; - sch->q.qlen = 0; }
static void dsmark_destroy(struct Qdisc *sch) diff --git a/net/sched/sch_etf.c b/net/sched/sch_etf.c index c48f91075b5c..d96103b0e2bf 100644 --- a/net/sched/sch_etf.c +++ b/net/sched/sch_etf.c @@ -445,9 +445,6 @@ static void etf_reset(struct Qdisc *sch) timesortedlist_clear(sch); __qdisc_reset_queue(&sch->q);
- sch->qstats.backlog = 0; - sch->q.qlen = 0; - q->last = 0; }
diff --git a/net/sched/sch_ets.c b/net/sched/sch_ets.c index 9c224872ef03..05817c55692f 100644 --- a/net/sched/sch_ets.c +++ b/net/sched/sch_ets.c @@ -722,8 +722,6 @@ static void ets_qdisc_reset(struct Qdisc *sch) } for (band = 0; band < q->nbands; band++) qdisc_reset(q->classes[band].qdisc); - sch->qstats.backlog = 0; - sch->q.qlen = 0; }
static void ets_qdisc_destroy(struct Qdisc *sch) diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c index 99e8db262198..01d6eea5b0ce 100644 --- a/net/sched/sch_fq_codel.c +++ b/net/sched/sch_fq_codel.c @@ -347,8 +347,6 @@ static void fq_codel_reset(struct Qdisc *sch) codel_vars_init(&flow->cvars); } memset(q->backlogs, 0, q->flows_cnt * sizeof(u32)); - sch->q.qlen = 0; - sch->qstats.backlog = 0; q->memory_usage = 0; }
diff --git a/net/sched/sch_fq_pie.c b/net/sched/sch_fq_pie.c index c70802785518..cf04f70e96bf 100644 --- a/net/sched/sch_fq_pie.c +++ b/net/sched/sch_fq_pie.c @@ -521,9 +521,6 @@ static void fq_pie_reset(struct Qdisc *sch) INIT_LIST_HEAD(&flow->flowchain); pie_vars_init(&flow->vars); } - - sch->q.qlen = 0; - sch->qstats.backlog = 0; }
static void fq_pie_destroy(struct Qdisc *sch) diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index d1902fca9844..cdc43a06aa9b 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1484,8 +1484,6 @@ hfsc_reset_qdisc(struct Qdisc *sch) } q->eligible = RB_ROOT; qdisc_watchdog_cancel(&q->watchdog); - sch->qstats.backlog = 0; - sch->q.qlen = 0; }
static void diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index cd70dbcbd72f..c3ba018fd083 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -966,8 +966,6 @@ static void htb_reset(struct Qdisc *sch) } qdisc_watchdog_cancel(&q->watchdog); __qdisc_reset_queue(&q->direct_queue); - sch->q.qlen = 0; - sch->qstats.backlog = 0; memset(q->hlevel, 0, sizeof(q->hlevel)); memset(q->row_mask, 0, sizeof(q->row_mask)); } diff --git a/net/sched/sch_multiq.c b/net/sched/sch_multiq.c index 5c27b4270b90..1c6dbcfa89b8 100644 --- a/net/sched/sch_multiq.c +++ b/net/sched/sch_multiq.c @@ -152,7 +152,6 @@ multiq_reset(struct Qdisc *sch)
for (band = 0; band < q->bands; band++) qdisc_reset(q->queues[band]); - sch->q.qlen = 0; q->curband = 0; }
diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c index 3eabb871a1d5..1c805fe05b82 100644 --- a/net/sched/sch_prio.c +++ b/net/sched/sch_prio.c @@ -135,8 +135,6 @@ prio_reset(struct Qdisc *sch)
for (prio = 0; prio < q->bands; prio++) qdisc_reset(q->queues[prio]); - sch->qstats.backlog = 0; - sch->q.qlen = 0; }
static int prio_offload(struct Qdisc *sch, struct tc_prio_qopt *qopt) diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c index af8c63a9ec18..1d1d81aeb389 100644 --- a/net/sched/sch_qfq.c +++ b/net/sched/sch_qfq.c @@ -1458,8 +1458,6 @@ static void qfq_reset_qdisc(struct Qdisc *sch) qdisc_reset(cl->qdisc); } } - sch->qstats.backlog = 0; - sch->q.qlen = 0; }
static void qfq_destroy_qdisc(struct Qdisc *sch) diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c index 40adf1f07a82..f1e013e3f04a 100644 --- a/net/sched/sch_red.c +++ b/net/sched/sch_red.c @@ -176,8 +176,6 @@ static void red_reset(struct Qdisc *sch) struct red_sched_data *q = qdisc_priv(sch);
qdisc_reset(q->qdisc); - sch->qstats.backlog = 0; - sch->q.qlen = 0; red_restart(&q->vars); }
diff --git a/net/sched/sch_sfb.c b/net/sched/sch_sfb.c index b2724057629f..0e1cb517b0d9 100644 --- a/net/sched/sch_sfb.c +++ b/net/sched/sch_sfb.c @@ -456,8 +456,6 @@ static void sfb_reset(struct Qdisc *sch) struct sfb_sched_data *q = qdisc_priv(sch);
qdisc_reset(q->qdisc); - sch->qstats.backlog = 0; - sch->q.qlen = 0; q->slot = 0; q->double_buffering = false; sfb_zero_all_buckets(q); diff --git a/net/sched/sch_skbprio.c b/net/sched/sch_skbprio.c index 7a5e4c454715..df72fb83d9c7 100644 --- a/net/sched/sch_skbprio.c +++ b/net/sched/sch_skbprio.c @@ -213,9 +213,6 @@ static void skbprio_reset(struct Qdisc *sch) struct skbprio_sched_data *q = qdisc_priv(sch); int prio;
- sch->qstats.backlog = 0; - sch->q.qlen = 0; - for (prio = 0; prio < SKBPRIO_MAX_PRIORITY; prio++) __skb_queue_purge(&q->qdiscs[prio]);
diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c index ab8835a72cee..7f33b31c7b8b 100644 --- a/net/sched/sch_taprio.c +++ b/net/sched/sch_taprio.c @@ -1626,8 +1626,6 @@ static void taprio_reset(struct Qdisc *sch) if (q->qdiscs[i]) qdisc_reset(q->qdiscs[i]); } - sch->qstats.backlog = 0; - sch->q.qlen = 0; }
static void taprio_destroy(struct Qdisc *sch) diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index 6eb17004a9e4..7461e5c67d50 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -316,8 +316,6 @@ static void tbf_reset(struct Qdisc *sch) struct tbf_sched_data *q = qdisc_priv(sch);
qdisc_reset(q->qdisc); - sch->qstats.backlog = 0; - sch->q.qlen = 0; q->t_c = ktime_get_ns(); q->tokens = q->buffer; q->ptokens = q->mtu; diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c index 6af6b95bdb67..79aaab51cbf5 100644 --- a/net/sched/sch_teql.c +++ b/net/sched/sch_teql.c @@ -124,7 +124,6 @@ teql_reset(struct Qdisc *sch) struct teql_sched_data *dat = qdisc_priv(sch);
skb_queue_purge(&dat->q); - sch->q.qlen = 0; }
static void
From: Zhengchao Shao shaozhengchao@huawei.com
[ Upstream commit 2a3fc78210b9f0e85372a2435368962009f480fc ]
When the default qdisc is sfb, if the qdisc of dev_queue fails to be inited during mqprio_init(), sfb_reset() is invoked to clear resources. In this case, the q->qdisc is NULL, and it will cause gpf issue.
The process is as follows: qdisc_create_dflt() sfb_init() tcf_block_get() --->failed, q->qdisc is NULL ... qdisc_put() ... sfb_reset() qdisc_reset(q->qdisc) --->q->qdisc is NULL ops = qdisc->ops
The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:qdisc_reset+0x2b/0x6f0 Call Trace: <TASK> sfb_reset+0x37/0xd0 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f2164122d04 </TASK>
Fixes: e13e02a3c68d ("net_sched: SFB flow scheduler") Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/sched/sch_sfb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/sched/sch_sfb.c b/net/sched/sch_sfb.c index 0e1cb517b0d9..9ded56228ea1 100644 --- a/net/sched/sch_sfb.c +++ b/net/sched/sch_sfb.c @@ -455,7 +455,8 @@ static void sfb_reset(struct Qdisc *sch) { struct sfb_sched_data *q = qdisc_priv(sch);
- qdisc_reset(q->qdisc); + if (likely(q->qdisc)) + qdisc_reset(q->qdisc); q->slot = 0; q->double_buffering = false; sfb_zero_all_buckets(q);
From: Pieter Jansen van Vuuren pieter.jansen-van-vuuren@amd.com
[ Upstream commit c2bf23e4a5af37a4d77901d9ff14c50a269f143d ]
Filters on different vports are qualified by different implicit MACs and/or VLANs, so shouldn't be considered equal even if their other match fields are identical.
Fixes: 7c460d9be610 ("sfc: Extend and abstract efx_filter_spec to cover Huntington/EF10") Co-developed-by: Edward Cree ecree.xilinx@gmail.com Signed-off-by: Edward Cree ecree.xilinx@gmail.com Signed-off-by: Pieter Jansen van Vuuren pieter.jansen-van-vuuren@amd.com Reviewed-by: Martin Habets habetsm.xilinx@gmail.com Link: https://lore.kernel.org/r/20221018092841.32206-1-pieter.jansen-van-vuuren@am... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sfc/filter.h | 3 ++- drivers/net/ethernet/sfc/rx_common.c | 10 +++++----- 2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/sfc/filter.h b/drivers/net/ethernet/sfc/filter.h index 40b2af8bfb81..2ac3c8f1b04b 100644 --- a/drivers/net/ethernet/sfc/filter.h +++ b/drivers/net/ethernet/sfc/filter.h @@ -157,7 +157,8 @@ struct efx_filter_spec { u32 flags:6; u32 dmaq_id:12; u32 rss_context; - __be16 outer_vid __aligned(4); /* allow jhash2() of match values */ + u32 vport_id; + __be16 outer_vid; __be16 inner_vid; u8 loc_mac[ETH_ALEN]; u8 rem_mac[ETH_ALEN]; diff --git a/drivers/net/ethernet/sfc/rx_common.c b/drivers/net/ethernet/sfc/rx_common.c index 2c09afac5beb..36b46ddb6710 100644 --- a/drivers/net/ethernet/sfc/rx_common.c +++ b/drivers/net/ethernet/sfc/rx_common.c @@ -676,17 +676,17 @@ bool efx_filter_spec_equal(const struct efx_filter_spec *left, (EFX_FILTER_FLAG_RX | EFX_FILTER_FLAG_TX))) return false;
- return memcmp(&left->outer_vid, &right->outer_vid, + return memcmp(&left->vport_id, &right->vport_id, sizeof(struct efx_filter_spec) - - offsetof(struct efx_filter_spec, outer_vid)) == 0; + offsetof(struct efx_filter_spec, vport_id)) == 0; }
u32 efx_filter_spec_hash(const struct efx_filter_spec *spec) { - BUILD_BUG_ON(offsetof(struct efx_filter_spec, outer_vid) & 3); - return jhash2((const u32 *)&spec->outer_vid, + BUILD_BUG_ON(offsetof(struct efx_filter_spec, vport_id) & 3); + return jhash2((const u32 *)&spec->vport_id, (sizeof(struct efx_filter_spec) - - offsetof(struct efx_filter_spec, outer_vid)) / 4, + offsetof(struct efx_filter_spec, vport_id)) / 4, 0); }
From: Yang Yingliang yangyingliang@huawei.com
[ Upstream commit ff2f5ec5d009844ec28f171123f9e58750cef4bf ]
Inject fault while probing module, if device_register() fails, but the refcount of kobject is not decreased to 0, the name allocated in dev_set_name() is leaked. Fix this by calling put_device(), so that name can be freed in callback function kobject_cleanup().
unreferenced object 0xffff00c01aba2100 (size 128): comm "systemd-udevd", pid 1259, jiffies 4294903284 (age 294.152s) hex dump (first 32 bytes): 68 6e 61 65 30 00 00 00 18 21 ba 1a c0 00 ff ff hnae0....!...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000034783f26>] slab_post_alloc_hook+0xa0/0x3e0 [<00000000748188f2>] __kmem_cache_alloc_node+0x164/0x2b0 [<00000000ab0743e8>] __kmalloc_node_track_caller+0x6c/0x390 [<000000006c0ffb13>] kvasprintf+0x8c/0x118 [<00000000fa27bfe1>] kvasprintf_const+0x60/0xc8 [<0000000083e10ed7>] kobject_set_name_vargs+0x3c/0xc0 [<000000000b87affc>] dev_set_name+0x7c/0xa0 [<000000003fd8fe26>] hnae_ae_register+0xcc/0x190 [hnae] [<00000000fe97edc9>] hns_dsaf_ae_init+0x9c/0x108 [hns_dsaf] [<00000000c36ff1eb>] hns_dsaf_probe+0x548/0x748 [hns_dsaf]
Fixes: 6fe6611ff275 ("net: add Hisilicon Network Subsystem hnae framework support") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Reviewed-by: Leon Romanovsky leonro@nvidia.com Link: https://lore.kernel.org/r/20221018122451.1749171-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns/hnae.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hnae.c b/drivers/net/ethernet/hisilicon/hns/hnae.c index 00fafc0f8512..430eccea8e5e 100644 --- a/drivers/net/ethernet/hisilicon/hns/hnae.c +++ b/drivers/net/ethernet/hisilicon/hns/hnae.c @@ -419,8 +419,10 @@ int hnae_ae_register(struct hnae_ae_dev *hdev, struct module *owner) hdev->cls_dev.release = hnae_release; (void)dev_set_name(&hdev->cls_dev, "hnae%d", hdev->id); ret = device_register(&hdev->cls_dev); - if (ret) + if (ret) { + put_device(&hdev->cls_dev); return ret; + }
__module_get(THIS_MODULE);
From: Eric Dumazet edumazet@google.com
[ Upstream commit ebda44da44f6f309d302522b049f43d6f829f7aa ]
We had one syzbot report [1] in syzbot queue for a while. I was waiting for more occurrences and/or a repro but Dmitry Vyukov spotted the issue right away.
<quoting Dmitry> qdisc_graft() drops reference to qdisc in notify_and_destroy while it's still assigned to dev->qdisc </quoting>
Indeed, RCU rules are clear when replacing a data structure. The visible pointer (dev->qdisc in this case) must be updated to the new object _before_ RCU grace period is started (qdisc_put(old) in this case).
[1] BUG: KASAN: use-after-free in __tcf_qdisc_find.part.0+0xa3a/0xac0 net/sched/cls_api.c:1066 Read of size 4 at addr ffff88802065e038 by task syz-executor.4/21027
CPU: 0 PID: 21027 Comm: syz-executor.4 Not tainted 6.0.0-rc3-syzkaller-00363-g7726d4c3e60b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x719 mm/kasan/report.c:433 kasan_report+0xb1/0x1e0 mm/kasan/report.c:495 __tcf_qdisc_find.part.0+0xa3a/0xac0 net/sched/cls_api.c:1066 __tcf_qdisc_find net/sched/cls_api.c:1051 [inline] tc_new_tfilter+0x34f/0x2200 net/sched/cls_api.c:2018 rtnetlink_rcv_msg+0x955/0xca0 net/core/rtnetlink.c:6081 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5efaa89279 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f5efbc31168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f5efab9bf80 RCX: 00007f5efaa89279 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005 RBP: 00007f5efaae32e9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5efb0cfb1f R14: 00007f5efbc31300 R15: 0000000000022000 </TASK>
Allocated by task 21027: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] ____kasan_kmalloc mm/kasan/common.c:516 [inline] ____kasan_kmalloc mm/kasan/common.c:475 [inline] __kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:525 kmalloc_node include/linux/slab.h:623 [inline] kzalloc_node include/linux/slab.h:744 [inline] qdisc_alloc+0xb0/0xc50 net/sched/sch_generic.c:938 qdisc_create_dflt+0x71/0x4a0 net/sched/sch_generic.c:997 attach_one_default_qdisc net/sched/sch_generic.c:1152 [inline] netdev_for_each_tx_queue include/linux/netdevice.h:2437 [inline] attach_default_qdiscs net/sched/sch_generic.c:1170 [inline] dev_activate+0x760/0xcd0 net/sched/sch_generic.c:1229 __dev_open+0x393/0x4d0 net/core/dev.c:1441 __dev_change_flags+0x583/0x750 net/core/dev.c:8556 rtnl_configure_link+0xee/0x240 net/core/rtnetlink.c:3189 rtnl_newlink_create net/core/rtnetlink.c:3371 [inline] __rtnl_newlink+0x10b8/0x17e0 net/core/rtnetlink.c:3580 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593 rtnetlink_rcv_msg+0x43a/0xca0 net/core/rtnetlink.c:6090 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 21020: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:367 [inline] ____kasan_slab_free+0x166/0x1c0 mm/kasan/common.c:329 kasan_slab_free include/linux/kasan.h:200 [inline] slab_free_hook mm/slub.c:1754 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1780 slab_free mm/slub.c:3534 [inline] kfree+0xe2/0x580 mm/slub.c:4562 rcu_do_batch kernel/rcu/tree.c:2245 [inline] rcu_core+0x7b5/0x1890 kernel/rcu/tree.c:2505 __do_softirq+0x1d3/0x9c6 kernel/softirq.c:571
Last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348 call_rcu+0x99/0x790 kernel/rcu/tree.c:2793 qdisc_put+0xcd/0xe0 net/sched/sch_generic.c:1083 notify_and_destroy net/sched/sch_api.c:1012 [inline] qdisc_graft+0xeb1/0x1270 net/sched/sch_api.c:1084 tc_modify_qdisc+0xbb7/0x1a00 net/sched/sch_api.c:1671 rtnetlink_rcv_msg+0x43a/0xca0 net/core/rtnetlink.c:6090 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd
Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348 kvfree_call_rcu+0x74/0x940 kernel/rcu/tree.c:3322 neigh_destroy+0x431/0x630 net/core/neighbour.c:912 neigh_release include/net/neighbour.h:454 [inline] neigh_cleanup_and_release+0x1f8/0x330 net/core/neighbour.c:103 neigh_del net/core/neighbour.c:225 [inline] neigh_remove_one+0x37d/0x460 net/core/neighbour.c:246 neigh_forced_gc net/core/neighbour.c:276 [inline] neigh_alloc net/core/neighbour.c:447 [inline] ___neigh_create+0x18b5/0x29a0 net/core/neighbour.c:642 ip6_finish_output2+0xfb8/0x1520 net/ipv6/ip6_output.c:125 __ip6_finish_output net/ipv6/ip6_output.c:195 [inline] ip6_finish_output+0x690/0x1160 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x1ed/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] mld_sendpack+0xa09/0xe70 net/ipv6/mcast.c:1820 mld_send_cr net/ipv6/mcast.c:2121 [inline] mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2653 process_one_work+0x991/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
The buggy address belongs to the object at ffff88802065e000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 56 bytes inside of 1024-byte region [ffff88802065e000, ffff88802065e400)
The buggy address belongs to the physical page: page:ffffea0000819600 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20658 head:ffffea0000819600 order:3 compound_mapcount:0 compound_pincount:0 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 0000000000000000 dead000000000001 ffff888011841dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 3523, tgid 3523 (sshd), ts 41495190986, free_ts 41417713212 prep_new_page mm/page_alloc.c:2532 [inline] get_page_from_freelist+0x109b/0x2ce0 mm/page_alloc.c:4283 __alloc_pages+0x1c7/0x510 mm/page_alloc.c:5515 alloc_pages+0x1a6/0x270 mm/mempolicy.c:2270 alloc_slab_page mm/slub.c:1824 [inline] allocate_slab+0x27e/0x3d0 mm/slub.c:1969 new_slab mm/slub.c:2029 [inline] ___slab_alloc+0x7f1/0xe10 mm/slub.c:3031 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3118 slab_alloc_node mm/slub.c:3209 [inline] __kmalloc_node_track_caller+0x2f2/0x380 mm/slub.c:4955 kmalloc_reserve net/core/skbuff.c:358 [inline] __alloc_skb+0xd9/0x2f0 net/core/skbuff.c:430 alloc_skb_fclone include/linux/skbuff.h:1307 [inline] tcp_stream_alloc_skb+0x38/0x580 net/ipv4/tcp.c:861 tcp_sendmsg_locked+0xc36/0x2f80 net/ipv4/tcp.c:1325 tcp_sendmsg+0x2b/0x40 net/ipv4/tcp.c:1483 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 sock_write_iter+0x291/0x3d0 net/socket.c:1108 call_write_iter include/linux/fs.h:2187 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9e9/0xdd0 fs/read_write.c:578 ksys_write+0x1e8/0x250 fs/read_write.c:631 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1449 [inline] free_pcp_prepare+0x5e4/0xd20 mm/page_alloc.c:1499 free_unref_page_prepare mm/page_alloc.c:3380 [inline] free_unref_page+0x19/0x4d0 mm/page_alloc.c:3476 __unfreeze_partials+0x17c/0x1a0 mm/slub.c:2548 qlink_free mm/kasan/quarantine.c:168 [inline] qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187 kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:294 __kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:447 kasan_slab_alloc include/linux/kasan.h:224 [inline] slab_post_alloc_hook mm/slab.h:727 [inline] slab_alloc_node mm/slub.c:3243 [inline] slab_alloc mm/slub.c:3251 [inline] __kmem_cache_alloc_lru mm/slub.c:3258 [inline] kmem_cache_alloc+0x267/0x3b0 mm/slub.c:3268 kmem_cache_zalloc include/linux/slab.h:723 [inline] alloc_buffer_head+0x20/0x140 fs/buffer.c:2974 alloc_page_buffers+0x280/0x790 fs/buffer.c:829 create_empty_buffers+0x2c/0xee0 fs/buffer.c:1558 ext4_block_write_begin+0x1004/0x1530 fs/ext4/inode.c:1074 ext4_da_write_begin+0x422/0xae0 fs/ext4/inode.c:2996 generic_perform_write+0x246/0x560 mm/filemap.c:3738 ext4_buffered_write_iter+0x15b/0x460 fs/ext4/file.c:270 ext4_file_write_iter+0x44a/0x1660 fs/ext4/file.c:679 call_write_iter include/linux/fs.h:2187 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9e9/0xdd0 fs/read_write.c:578
Fixes: af356afa010f ("net_sched: reintroduce dev->qdisc for use by sch_api") Reported-by: syzbot syzkaller@googlegroups.com Diagnosed-by: Dmitry Vyukov dvyukov@google.com Signed-off-by: Eric Dumazet edumazet@google.com Link: https://lore.kernel.org/r/20221018203258.2793282-1-edumazet@google.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/sched/sch_api.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index 6e18aa417782..d8ffe4114385 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -1081,12 +1081,13 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent,
skip: if (!ingress) { - notify_and_destroy(net, skb, n, classid, - rtnl_dereference(dev->qdisc), new); + old = rtnl_dereference(dev->qdisc); if (new && !new->ops->attach) qdisc_refcount_inc(new); rcu_assign_pointer(dev->qdisc, new ? : &noop_qdisc);
+ notify_and_destroy(net, skb, n, classid, old, new); + if (new && new->ops->attach) new->ops->attach(new); } else {
From: Felix Riemann felix.riemann@sma.de
[ Upstream commit 7f378c03aa4952507521174fb0da7b24a9ad0be6 ]
If the cable is disconnected the PHY seems to toggle between MDI and MDI-X modes. With the MDI crossover status interrupt active this causes roughly 10 interrupts per second.
As the crossover status isn't checked by the driver, the interrupt can be disabled to reduce the interrupt load.
Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Felix Riemann felix.riemann@sma.de Reviewed-by: Andrew Lunn andrew@lunn.ch Link: https://lore.kernel.org/r/20221018104755.30025-1-svc.sw.rte.linux@sma.de Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/dp83822.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c index 3a8849716459..db651649e0b8 100644 --- a/drivers/net/phy/dp83822.c +++ b/drivers/net/phy/dp83822.c @@ -268,8 +268,7 @@ static int dp83822_config_intr(struct phy_device *phydev) DP83822_EEE_ERROR_CHANGE_INT_EN);
if (!dp83822->fx_enabled) - misr_status |= DP83822_MDI_XOVER_INT_EN | - DP83822_ANEG_ERR_INT_EN | + misr_status |= DP83822_ANEG_ERR_INT_EN | DP83822_WOL_PKT_INT_EN;
err = phy_write(phydev, MII_DP83822_MISR2, misr_status);
From: Charlotte Tan charlotte@extrahop.com
[ Upstream commit 5566e68d829f5d87670d5984c1c2ccb4c518405f ]
arch_rmrr_sanity_check() warns if the RMRR is not covered by an ACPI Reserved region, but it seems like it should accept an NVS region as well. The ACPI spec https://uefi.org/specs/ACPI/6.5/15_System_Address_Map_Interfaces.html uses similar wording for "Reserved" and "NVS" region types; for NVS regions it says "This range of addresses is in use or reserved by the system and must not be used by the operating system."
There is an old comment on this mailing list that also suggests NVS regions should pass the arch_rmrr_sanity_check() test:
The warnings come from arch_rmrr_sanity_check() since it checks whether the region is E820_TYPE_RESERVED. However, if the purpose of the check is to detect RMRR has regions that may be used by OS as free memory, isn't E820_TYPE_NVS safe, too?
This patch overlaps with another proposed patch that would add the region type to the log since sometimes the bug reporter sees this log on the console but doesn't know to include the kernel log:
https://lore.kernel.org/lkml/20220611204859.234975-3-atomlin@redhat.com/
Here's an example of the "Firmware Bug" apparent false positive (wrapped for line length):
DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x000000006f760000-0x000000006f762fff], contact BIOS vendor for fixes DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x000000006f760000-0x000000006f762fff]
This is the snippet from the e820 table:
BIOS-e820: [mem 0x0000000068bff000-0x000000006ebfefff] reserved BIOS-e820: [mem 0x000000006ebff000-0x000000006f9fefff] ACPI NVS BIOS-e820: [mem 0x000000006f9ff000-0x000000006fffefff] ACPI data
Fixes: f036c7fa0ab6 ("iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved") Cc: Will Mortensen will@extrahop.com Link: https://lore.kernel.org/linux-iommu/64a5843d-850d-e58c-4fc2-0a0eeeb656dc@nec... Link: https://bugzilla.kernel.org/show_bug.cgi?id=216443 Signed-off-by: Charlotte Tan charlotte@extrahop.com Reviewed-by: Aaron Tomlin atomlin@redhat.com Link: https://lore.kernel.org/r/20220929044449.32515-1-charlotte@extrahop.com Signed-off-by: Lu Baolu baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/asm/iommu.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h index bf1ed2ddc74b..7a983119bc40 100644 --- a/arch/x86/include/asm/iommu.h +++ b/arch/x86/include/asm/iommu.h @@ -17,8 +17,10 @@ arch_rmrr_sanity_check(struct acpi_dmar_reserved_memory *rmrr) { u64 start = rmrr->base_address; u64 end = rmrr->end_address + 1; + int entry_type;
- if (e820__mapped_all(start, end, E820_TYPE_RESERVED)) + entry_type = e820__get_entry_type(start, end); + if (entry_type == E820_TYPE_RESERVED || entry_type == E820_TYPE_NVS) return 0;
pr_err(FW_BUG "No firmware reserved region can cover this RMRR [%#018Lx-%#018Lx], contact BIOS vendor for fixes\n",
From: Jerry Snitselaar jsnitsel@redhat.com
[ Upstream commit 620bf9f981365c18cc2766c53d92bf8131c63f32 ]
A splat from kmem_cache_destroy() was seen with a kernel prior to commit ee2653bbe89d ("iommu/vt-d: Remove domain and devinfo mempool") when there was a failure in init_dmars(), because the iommu_domain cache still had objects. While the mempool code is now gone, there still is a leak of the si_domain memory if init_dmars() fails. So clean up si_domain in the init_dmars() error path.
Cc: Lu Baolu baolu.lu@linux.intel.com Cc: Joerg Roedel joro@8bytes.org Cc: Will Deacon will@kernel.org Cc: Robin Murphy robin.murphy@arm.com Fixes: 86080ccc223a ("iommu/vt-d: Allocate si_domain in init_dmars()") Signed-off-by: Jerry Snitselaar jsnitsel@redhat.com Link: https://lore.kernel.org/r/20221010144842.308890-1-jsnitsel@redhat.com Signed-off-by: Lu Baolu baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/intel/iommu.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index c48cf737b521..f23329b7f97c 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -2846,6 +2846,7 @@ static int __init si_domain_init(int hw)
if (md_domain_init(si_domain, DEFAULT_DOMAIN_ADDRESS_WIDTH)) { domain_exit(si_domain); + si_domain = NULL; return -EFAULT; }
@@ -3505,6 +3506,10 @@ static int __init init_dmars(void) disable_dmar_iommu(iommu); free_dmar_iommu(iommu); } + if (si_domain) { + domain_exit(si_domain); + si_domain = NULL; + }
kfree(g_iommus);
From: Dmitry Osipenko dmitry.osipenko@collabora.com
[ Upstream commit 4656b3a26a9e9fe5f04bfd2ab55b066266ba7f4d ]
Make virtio_gpu_plane_cleanup_fb() to clean the state which DRM core wants to clean up and not the current plane's state. Normally the older atomic state is cleaned up, but the newer state could also be cleaned up in case of aborted commits.
Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko dmitry.osipenko@collabora.com Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-6-dmitry... Signed-off-by: Gerd Hoffmann kraxel@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/virtio/virtgpu_plane.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/virtio/virtgpu_plane.c b/drivers/gpu/drm/virtio/virtgpu_plane.c index 6a311cd93440..e6de62734269 100644 --- a/drivers/gpu/drm/virtio/virtgpu_plane.c +++ b/drivers/gpu/drm/virtio/virtgpu_plane.c @@ -213,14 +213,14 @@ static int virtio_gpu_cursor_prepare_fb(struct drm_plane *plane, }
static void virtio_gpu_cursor_cleanup_fb(struct drm_plane *plane, - struct drm_plane_state *old_state) + struct drm_plane_state *state) { struct virtio_gpu_framebuffer *vgfb;
- if (!plane->state->fb) + if (!state->fb) return;
- vgfb = to_virtio_gpu_framebuffer(plane->state->fb); + vgfb = to_virtio_gpu_framebuffer(state->fb); if (vgfb->fence) { dma_fence_put(&vgfb->fence->f); vgfb->fence = NULL;
From: Fabio Estevam festevam@gmail.com
[ Upstream commit cc2afb0d4c7cbba6743ed6d9564f0883cab6bae1 ]
The mxs-dma driver is only used by DT platforms and the .id_table is unused.
Get rid of it to simplify the code.
Signed-off-by: Fabio Estevam festevam@gmail.com Link: https://lore.kernel.org/r/20201123193051.17285-1-festevam@gmail.com Signed-off-by: Vinod Koul vkoul@kernel.org Stable-dep-of: 26696d465716 ("dmaengine: mxs: use platform_driver_register") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/mxs-dma.c | 37 +++++-------------------------------- 1 file changed, 5 insertions(+), 32 deletions(-)
--- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -167,29 +167,11 @@ static struct mxs_dma_type mxs_dma_types } };
-static const struct platform_device_id mxs_dma_ids[] = { - { - .name = "imx23-dma-apbh", - .driver_data = (kernel_ulong_t) &mxs_dma_types[0], - }, { - .name = "imx23-dma-apbx", - .driver_data = (kernel_ulong_t) &mxs_dma_types[1], - }, { - .name = "imx28-dma-apbh", - .driver_data = (kernel_ulong_t) &mxs_dma_types[2], - }, { - .name = "imx28-dma-apbx", - .driver_data = (kernel_ulong_t) &mxs_dma_types[3], - }, { - /* end of list */ - } -}; - static const struct of_device_id mxs_dma_dt_ids[] = { - { .compatible = "fsl,imx23-dma-apbh", .data = &mxs_dma_ids[0], }, - { .compatible = "fsl,imx23-dma-apbx", .data = &mxs_dma_ids[1], }, - { .compatible = "fsl,imx28-dma-apbh", .data = &mxs_dma_ids[2], }, - { .compatible = "fsl,imx28-dma-apbx", .data = &mxs_dma_ids[3], }, + { .compatible = "fsl,imx23-dma-apbh", .data = &mxs_dma_types[0], }, + { .compatible = "fsl,imx23-dma-apbx", .data = &mxs_dma_types[1], }, + { .compatible = "fsl,imx28-dma-apbh", .data = &mxs_dma_types[2], }, + { .compatible = "fsl,imx28-dma-apbx", .data = &mxs_dma_types[3], }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mxs_dma_dt_ids); @@ -762,8 +744,6 @@ static struct dma_chan *mxs_dma_xlate(st static int __init mxs_dma_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - const struct platform_device_id *id_entry; - const struct of_device_id *of_id; const struct mxs_dma_type *dma_type; struct mxs_dma_engine *mxs_dma; struct resource *iores; @@ -779,13 +759,7 @@ static int __init mxs_dma_probe(struct p return ret; }
- of_id = of_match_device(mxs_dma_dt_ids, &pdev->dev); - if (of_id) - id_entry = of_id->data; - else - id_entry = platform_get_device_id(pdev); - - dma_type = (struct mxs_dma_type *)id_entry->driver_data; + dma_type = (struct mxs_dma_type *)of_device_get_match_data(&pdev->dev); mxs_dma->type = dma_type->type; mxs_dma->dev_id = dma_type->id;
@@ -865,7 +839,6 @@ static struct platform_driver mxs_dma_dr .name = "mxs-dma", .of_match_table = mxs_dma_dt_ids, }, - .id_table = mxs_dma_ids, };
static int __init mxs_dma_module_init(void)
From: Dario Binacchi dario.binacchi@amarulasolutions.com
[ Upstream commit 26696d4657167112a1079f86cba1739765c1360e ]
Driver registration fails on SOC imx8mn as its supplier, the clock control module, is probed later than subsys initcall level. This driver uses platform_driver_probe which is not compatible with deferred probing and won't be probed again later if probe function fails due to clock not being available at that time.
This patch replaces the use of platform_driver_probe with platform_driver_register which will allow probing the driver later again when the clock control module will be available.
The __init annotation has been dropped because it is not compatible with deferred probing. The code is not executed once and its memory cannot be freed.
Fixes: a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28") Co-developed-by: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Dario Binacchi dario.binacchi@amarulasolutions.com Acked-by: Sascha Hauer s.hauer@pengutronix.de Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220921170556.1055962-1-dario.binacchi@amarulasol... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/mxs-dma.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index 994fc4d2aca4..dc147cc2436e 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -670,7 +670,7 @@ static enum dma_status mxs_dma_tx_status(struct dma_chan *chan, return mxs_chan->status; }
-static int __init mxs_dma_init(struct mxs_dma_engine *mxs_dma) +static int mxs_dma_init(struct mxs_dma_engine *mxs_dma) { int ret;
@@ -741,7 +741,7 @@ static struct dma_chan *mxs_dma_xlate(struct of_phandle_args *dma_spec, ofdma->of_node); }
-static int __init mxs_dma_probe(struct platform_device *pdev) +static int mxs_dma_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; const struct mxs_dma_type *dma_type; @@ -839,10 +839,7 @@ static struct platform_driver mxs_dma_driver = { .name = "mxs-dma", .of_match_table = mxs_dma_dt_ids, }, + .probe = mxs_dma_probe, };
-static int __init mxs_dma_module_init(void) -{ - return platform_driver_probe(&mxs_dma_driver, mxs_dma_probe); -} -subsys_initcall(mxs_dma_module_init); +builtin_platform_driver(mxs_dma_driver);
From: sunliming sunliming@kylinos.cn
[ Upstream commit f4b0d318097e45cbac5e14976f8bb56aa2cef504 ]
Two conditional compilation directives "#ifdef CONFIG_TRACER_MAX_TRACE" are used consecutively, and no other code in between. Simplify conditional the compilation code and only use one "#ifdef CONFIG_TRACER_MAX_TRACE".
Link: https://lkml.kernel.org/r/20220602140613.545069-1-sunliming@kylinos.cn
Signed-off-by: sunliming sunliming@kylinos.cn Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Stable-dep-of: a541a9559bb0 ("tracing: Do not free snapshot if tracer is on cmdline") Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/trace.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index a5245362ce7a..870033f9c198 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -6025,9 +6025,7 @@ int tracing_set_tracer(struct trace_array *tr, const char *buf) synchronize_rcu(); free_snapshot(tr); } -#endif
-#ifdef CONFIG_TRACER_MAX_TRACE if (t->use_max_tr && !had_max_tr) { ret = tracing_alloc_snapshot_instance(tr); if (ret < 0)
From: Steven Rostedt (Google) rostedt@goodmis.org
[ Upstream commit a541a9559bb0a8ecc434de01d3e4826c32e8bb53 ]
The ftrace_boot_snapshot and alloc_snapshot cmdline options allocate the snapshot buffer at boot up for use later. The ftrace_boot_snapshot in particular requires the snapshot to be allocated because it will take a snapshot at the end of boot up allowing to see the traces that happened during boot so that it's not lost when user space takes over.
When a tracer is registered (started) there's a path that checks if it requires the snapshot buffer or not, and if it does not and it was allocated it will do a synchronization and free the snapshot buffer.
This is only required if the previous tracer was using it for "max latency" snapshots, as it needs to make sure all max snapshots are complete before freeing. But this is only needed if the previous tracer was using the snapshot buffer for latency (like irqoff tracer and friends). But it does not make sense to free it, if the previous tracer was not using it, and the snapshot was allocated by the cmdline parameters. This basically takes away the point of allocating it in the first place!
Note, the allocated snapshot worked fine for just trace events, but fails when a tracer is enabled on the cmdline.
Further investigation, this goes back even further and it does not require a tracer on the cmdline to fail. Simply enable snapshots and then enable a tracer, and it will remove the snapshot.
Link: https://lkml.kernel.org/r/20221005113757.041df7fe@gandalf.local.home
Cc: Masami Hiramatsu mhiramat@kernel.org Cc: Andrew Morton akpm@linux-foundation.org Cc: stable@vger.kernel.org Fixes: 45ad21ca5530 ("tracing: Have trace_array keep track if snapshot buffer is allocated") Reported-by: Ross Zwisler zwisler@kernel.org Tested-by: Ross Zwisler zwisler@kernel.org Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/trace.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 870033f9c198..b7cb9147f0c5 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -6008,12 +6008,12 @@ int tracing_set_tracer(struct trace_array *tr, const char *buf) if (tr->current_trace->reset) tr->current_trace->reset(tr);
+#ifdef CONFIG_TRACER_MAX_TRACE + had_max_tr = tr->current_trace->use_max_tr; + /* Current trace needs to be nop_trace before synchronize_rcu */ tr->current_trace = &nop_trace;
-#ifdef CONFIG_TRACER_MAX_TRACE - had_max_tr = tr->allocated_snapshot; - if (had_max_tr && !t->use_max_tr) { /* * We need to make sure that the update_max_tr sees that @@ -6026,11 +6026,13 @@ int tracing_set_tracer(struct trace_array *tr, const char *buf) free_snapshot(tr); }
- if (t->use_max_tr && !had_max_tr) { + if (t->use_max_tr && !tr->allocated_snapshot) { ret = tracing_alloc_snapshot_instance(tr); if (ret < 0) goto out; } +#else + tr->current_trace = &nop_trace; #endif
if (t->init) {
From: Juergen Gross jgross@suse.com
[ Upstream commit 30dcc56bba911db561c35d4131baf983a41023f8 ]
XENFEAT_gnttab_map_avail_bits is always set in Xen 4.0 and newer. Remove coding assuming it might be zero.
Signed-off-by: Juergen Gross jgross@suse.com Acked-by: Peter Zijlstra (Intel) peterz@infradead.org Reviewed-by: Boris Ostrovsky boris.ostrovsky@oracle.com Link: https://lore.kernel.org/r/20210730071804.4302-4-jgross@suse.com Signed-off-by: Juergen Gross jgross@suse.com Stable-dep-of: 5c13a4a0291b ("xen/gntdev: Accommodate VMA splitting") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/gntdev.c | 36 ++---------------------------------- 1 file changed, 2 insertions(+), 34 deletions(-)
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 54fee4087bf1..5dd9d1ac755e 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -289,20 +289,13 @@ static int find_grant_ptes(pte_t *pte, unsigned long addr, void *data) { struct gntdev_grant_map *map = data; unsigned int pgnr = (addr - map->vma->vm_start) >> PAGE_SHIFT; - int flags = map->flags | GNTMAP_application_map | GNTMAP_contains_pte; + int flags = map->flags | GNTMAP_application_map | GNTMAP_contains_pte | + (1 << _GNTMAP_guest_avail0); u64 pte_maddr;
BUG_ON(pgnr >= map->count); pte_maddr = arbitrary_virt_to_machine(pte).maddr;
- /* - * Set the PTE as special to force get_user_pages_fast() fall - * back to the slow path. If this is not supported as part of - * the grant map, it will be done afterwards. - */ - if (xen_feature(XENFEAT_gnttab_map_avail_bits)) - flags |= (1 << _GNTMAP_guest_avail0); - gnttab_set_map_op(&map->map_ops[pgnr], pte_maddr, flags, map->grants[pgnr].ref, map->grants[pgnr].domid); @@ -311,14 +304,6 @@ static int find_grant_ptes(pte_t *pte, unsigned long addr, void *data) return 0; }
-#ifdef CONFIG_X86 -static int set_grant_ptes_as_special(pte_t *pte, unsigned long addr, void *data) -{ - set_pte_at(current->mm, addr, pte, pte_mkspecial(*pte)); - return 0; -} -#endif - int gntdev_map_grant_pages(struct gntdev_grant_map *map) { size_t alloced = 0; @@ -1102,23 +1087,6 @@ static int gntdev_mmap(struct file *flip, struct vm_area_struct *vma) err = vm_map_pages_zero(vma, map->pages, map->count); if (err) goto out_put_map; - } else { -#ifdef CONFIG_X86 - /* - * If the PTEs were not made special by the grant map - * hypercall, do so here. - * - * This is racy since the mapping is already visible - * to userspace but userspace should be well-behaved - * enough to not touch it until the mmap() call - * returns. - */ - if (!xen_feature(XENFEAT_gnttab_map_avail_bits)) { - apply_to_page_range(vma->vm_mm, vma->vm_start, - vma->vm_end - vma->vm_start, - set_grant_ptes_as_special, NULL); - } -#endif }
return 0;
From: M. Vefa Bicakci m.v.b@runbox.com
[ Upstream commit 5c13a4a0291b30191eff9ead8d010e1ca43a4d0c ]
Prior to this commit, the gntdev driver code did not handle the following scenario correctly with paravirtualized (PV) Xen domains:
* User process sets up a gntdev mapping composed of two grant mappings (i.e., two pages shared by another Xen domain). * User process munmap()s one of the pages. * User process munmap()s the remaining page. * User process exits.
In the scenario above, the user process would cause the kernel to log the following messages in dmesg for the first munmap(), and the second munmap() call would result in similar log messages:
BUG: Bad page map in process doublemap.test pte:... pmd:... page:0000000057c97bff refcount:1 mapcount:-1 \ mapping:0000000000000000 index:0x0 pfn:... ... page dumped because: bad pte ... file:gntdev fault:0x0 mmap:gntdev_mmap [xen_gntdev] readpage:0x0 ... Call Trace: <TASK> dump_stack_lvl+0x46/0x5e print_bad_pte.cold+0x66/0xb6 unmap_page_range+0x7e5/0xdc0 unmap_vmas+0x78/0xf0 unmap_region+0xa8/0x110 __do_munmap+0x1ea/0x4e0 __vm_munmap+0x75/0x120 __x64_sys_munmap+0x28/0x40 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x61/0xcb ...
For each munmap() call, the Xen hypervisor (if built with CONFIG_DEBUG) would print out the following and trigger a general protection fault in the affected Xen PV domain:
(XEN) d0v... Attempt to implicitly unmap d0's grant PTE ... (XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...
As of this writing, gntdev_grant_map structure's vma field (referred to as map->vma below) is mainly used for checking the start and end addresses of mappings. However, with split VMAs, these may change, and there could be more than one VMA associated with a gntdev mapping. Hence, remove the use of map->vma and rely on map->pages_vm_start for the original start address and on (map->count << PAGE_SHIFT) for the original mapping size. Let the invalidate() and find_special_page() hooks use these.
Also, given that there can be multiple VMAs associated with a gntdev mapping, move the "mmu_interval_notifier_remove(&map->notifier)" call to the end of gntdev_put_map, so that the MMU notifier is only removed after the closing of the last remaining VMA.
Finally, use an atomic to prevent inadvertent gntdev mapping re-use, instead of using the map->live_grants atomic counter and/or the map->vma pointer (the latter of which is now removed). This prevents the userspace from mmap()'ing (with MAP_FIXED) a gntdev mapping over the same address range as a previously set up gntdev mapping. This scenario can be summarized with the following call-trace, which was valid prior to this commit:
mmap gntdev_mmap mmap (repeat mmap with MAP_FIXED over the same address range) gntdev_invalidate unmap_grant_pages (sets 'being_removed' entries to true) gnttab_unmap_refs_async unmap_single_vma gntdev_mmap (maps the shared pages again) munmap gntdev_invalidate unmap_grant_pages (no-op because 'being_removed' entries are true) unmap_single_vma (For PV domains, Xen reports that a granted page is being unmapped and triggers a general protection fault in the affected domain, if Xen was built with CONFIG_DEBUG)
The fix for this last scenario could be worth its own commit, but we opted for a single commit, because removing the gntdev_grant_map structure's vma field requires guarding the entry to gntdev_mmap(), and the live_grants atomic counter is not sufficient on its own to prevent the mmap() over a pre-existing mapping.
Link: https://github.com/QubesOS/qubes-issues/issues/7631 Fixes: ab31523c2fca ("xen/gntdev: allow usermode to map granted pages") Cc: stable@vger.kernel.org Signed-off-by: M. Vefa Bicakci m.v.b@runbox.com Reviewed-by: Juergen Gross jgross@suse.com Link: https://lore.kernel.org/r/20221002222006.2077-3-m.v.b@runbox.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/gntdev-common.h | 3 +- drivers/xen/gntdev.c | 58 ++++++++++++++++--------------------- 2 files changed, 27 insertions(+), 34 deletions(-)
diff --git a/drivers/xen/gntdev-common.h b/drivers/xen/gntdev-common.h index 40ef379c28ab..9c286b2a1900 100644 --- a/drivers/xen/gntdev-common.h +++ b/drivers/xen/gntdev-common.h @@ -44,9 +44,10 @@ struct gntdev_unmap_notify { };
struct gntdev_grant_map { + atomic_t in_use; struct mmu_interval_notifier notifier; + bool notifier_init; struct list_head next; - struct vm_area_struct *vma; int index; int count; int flags; diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 5dd9d1ac755e..ff195b571763 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -276,6 +276,9 @@ void gntdev_put_map(struct gntdev_priv *priv, struct gntdev_grant_map *map) */ }
+ if (use_ptemod && map->notifier_init) + mmu_interval_notifier_remove(&map->notifier); + if (map->notify.flags & UNMAP_NOTIFY_SEND_EVENT) { notify_remote_via_evtchn(map->notify.event); evtchn_put(map->notify.event); @@ -288,7 +291,7 @@ void gntdev_put_map(struct gntdev_priv *priv, struct gntdev_grant_map *map) static int find_grant_ptes(pte_t *pte, unsigned long addr, void *data) { struct gntdev_grant_map *map = data; - unsigned int pgnr = (addr - map->vma->vm_start) >> PAGE_SHIFT; + unsigned int pgnr = (addr - map->pages_vm_start) >> PAGE_SHIFT; int flags = map->flags | GNTMAP_application_map | GNTMAP_contains_pte | (1 << _GNTMAP_guest_avail0); u64 pte_maddr; @@ -478,11 +481,7 @@ static void gntdev_vma_close(struct vm_area_struct *vma) struct gntdev_priv *priv = file->private_data;
pr_debug("gntdev_vma_close %p\n", vma); - if (use_ptemod) { - WARN_ON(map->vma != vma); - mmu_interval_notifier_remove(&map->notifier); - map->vma = NULL; - } + vma->vm_private_data = NULL; gntdev_put_map(priv, map); } @@ -510,29 +509,30 @@ static bool gntdev_invalidate(struct mmu_interval_notifier *mn, struct gntdev_grant_map *map = container_of(mn, struct gntdev_grant_map, notifier); unsigned long mstart, mend; + unsigned long map_start, map_end;
if (!mmu_notifier_range_blockable(range)) return false;
+ map_start = map->pages_vm_start; + map_end = map->pages_vm_start + (map->count << PAGE_SHIFT); + /* * If the VMA is split or otherwise changed the notifier is not * updated, but we don't want to process VA's outside the modified * VMA. FIXME: It would be much more understandable to just prevent * modifying the VMA in the first place. */ - if (map->vma->vm_start >= range->end || - map->vma->vm_end <= range->start) + if (map_start >= range->end || map_end <= range->start) return true;
- mstart = max(range->start, map->vma->vm_start); - mend = min(range->end, map->vma->vm_end); + mstart = max(range->start, map_start); + mend = min(range->end, map_end); pr_debug("map %d+%d (%lx %lx), range %lx %lx, mrange %lx %lx\n", - map->index, map->count, - map->vma->vm_start, map->vma->vm_end, - range->start, range->end, mstart, mend); - unmap_grant_pages(map, - (mstart - map->vma->vm_start) >> PAGE_SHIFT, - (mend - mstart) >> PAGE_SHIFT); + map->index, map->count, map_start, map_end, + range->start, range->end, mstart, mend); + unmap_grant_pages(map, (mstart - map_start) >> PAGE_SHIFT, + (mend - mstart) >> PAGE_SHIFT);
return true; } @@ -1012,18 +1012,15 @@ static int gntdev_mmap(struct file *flip, struct vm_area_struct *vma) return -EINVAL;
pr_debug("map %d+%d at %lx (pgoff %lx)\n", - index, count, vma->vm_start, vma->vm_pgoff); + index, count, vma->vm_start, vma->vm_pgoff);
mutex_lock(&priv->lock); map = gntdev_find_map_index(priv, index, count); if (!map) goto unlock_out; - if (use_ptemod && map->vma) - goto unlock_out; - if (atomic_read(&map->live_grants)) { - err = -EAGAIN; + if (!atomic_add_unless(&map->in_use, 1, 1)) goto unlock_out; - } + refcount_inc(&map->users);
vma->vm_ops = &gntdev_vmops; @@ -1044,15 +1041,16 @@ static int gntdev_mmap(struct file *flip, struct vm_area_struct *vma) map->flags |= GNTMAP_readonly; }
+ map->pages_vm_start = vma->vm_start; + if (use_ptemod) { - map->vma = vma; err = mmu_interval_notifier_insert_locked( &map->notifier, vma->vm_mm, vma->vm_start, vma->vm_end - vma->vm_start, &gntdev_mmu_ops); - if (err) { - map->vma = NULL; + if (err) goto out_unlock_put; - } + + map->notifier_init = true; } mutex_unlock(&priv->lock);
@@ -1069,7 +1067,6 @@ static int gntdev_mmap(struct file *flip, struct vm_area_struct *vma) */ mmu_interval_read_begin(&map->notifier);
- map->pages_vm_start = vma->vm_start; err = apply_to_page_range(vma->vm_mm, vma->vm_start, vma->vm_end - vma->vm_start, find_grant_ptes, map); @@ -1098,13 +1095,8 @@ static int gntdev_mmap(struct file *flip, struct vm_area_struct *vma) out_unlock_put: mutex_unlock(&priv->lock); out_put_map: - if (use_ptemod) { + if (use_ptemod) unmap_grant_pages(map, 0, map->count); - if (map->vma) { - mmu_interval_notifier_remove(&map->notifier); - map->vma = NULL; - } - } gntdev_put_map(priv, map); return err; }
From: Prathamesh Shete pshete@nvidia.com
[ Upstream commit b78870e7f41534cc719c295d1f8809aca93aeeab ]
Ensure tegra_host member "curr_clk_rate" holds the actual clock rate instead of requested clock rate for proper use during tuning correction algorithm. Actual clk rate may not be the same as the requested clk frequency depending on the parent clock source set. Tuning correction algorithm depends on certain parameters which are sensitive to current clk rate. If the host clk is selected instead of the actual clock rate, tuning correction algorithm may end up applying invalid correction, which could result in errors
Fixes: ea8fc5953e8b ("mmc: tegra: update hw tuning process") Signed-off-by: Aniruddha TVS Rao anrao@nvidia.com Signed-off-by: Prathamesh Shete pshete@nvidia.com Acked-by: Adrian Hunter adrian.hunter@intel.com Acked-by: Thierry Reding treding@nvidia.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221006130622.22900-4-pshete@nvidia.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/sdhci-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index d50b691f6c44..67211fc42d24 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -760,7 +760,7 @@ static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock) */ host_clk = tegra_host->ddr_signaling ? clock * 2 : clock; clk_set_rate(pltfm_host->clk, host_clk); - tegra_host->curr_clk_rate = host_clk; + tegra_host->curr_clk_rate = clk_get_rate(pltfm_host->clk); if (tegra_host->ddr_signaling) host->max_clk = host_clk; else
From: Kefeng Wang wangkefeng.wang@huawei.com
[ Upstream commit 46ad48e8a28da7cc37a16c7e7fc632ecf906e4bf ]
Add the machine name to kernel boot-up log, and install the machine name to stack dump for DT boot mode.
Signed-off-by: Kefeng Wang wangkefeng.wang@huawei.com Reviewed-by: Atish Patra atish.patra@wdc.com Signed-off-by: Palmer Dabbelt palmerdabbelt@google.com Stable-dep-of: 10f6913c548b ("riscv: always honor the CONFIG_CMDLINE_FORCE when parsing dtb") Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/kernel/setup.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c index 117f3212a8e4..5d17d3ce36fd 100644 --- a/arch/riscv/kernel/setup.c +++ b/arch/riscv/kernel/setup.c @@ -54,8 +54,15 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); static void __init parse_dtb(void) { /* Early scan of device tree from init memory */ - if (early_init_dt_scan(dtb_early_va)) + if (early_init_dt_scan(dtb_early_va)) { + const char *name = of_flat_dt_get_machine_name(); + + if (name) { + pr_info("Machine model: %s\n", name); + dump_stack_set_arch_desc("%s (DT)", name); + } return; + }
pr_err("No DTB passed to the kernel\n"); #ifdef CONFIG_CMDLINE_FORCE
From: Wenting Zhang zephray@outlook.com
[ Upstream commit 10f6913c548b32ecb73801a16b120e761c6957ea ]
When CONFIG_CMDLINE_FORCE is enabled, cmdline provided by CONFIG_CMDLINE are always used. This allows CONFIG_CMDLINE to be used regardless of the result of device tree scanning.
This especially fixes the case where a device tree without the chosen node is supplied to the kernel. In such cases, early_init_dt_scan would return true. But inside early_init_dt_scan_chosen, the cmdline won't be updated as there is no chosen node in the device tree. As a result, CONFIG_CMDLINE is not copied into boot_command_line even if CONFIG_CMDLINE_FORCE is enabled. This commit allows properly update boot_command_line in this situation.
Fixes: 8fd6e05c7463 ("arch: riscv: support kernel command line forcing when no DTB passed") Signed-off-by: Wenting Zhang zephray@outlook.com Reviewed-by: Björn Töpel bjorn@kernel.org Reviewed-by: Conor Dooley conor.dooley@microchip.com Link: https://lore.kernel.org/r/PSBPR04MB399135DFC54928AB958D0638B1829@PSBPR04MB39... Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt palmer@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c index 5d17d3ce36fd..cc85858f7fe8 100644 --- a/arch/riscv/kernel/setup.c +++ b/arch/riscv/kernel/setup.c @@ -61,10 +61,10 @@ static void __init parse_dtb(void) pr_info("Machine model: %s\n", name); dump_stack_set_arch_desc("%s (DT)", name); } - return; + } else { + pr_err("No DTB passed to the kernel\n"); }
- pr_err("No DTB passed to the kernel\n"); #ifdef CONFIG_CMDLINE_FORCE strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); pr_info("Forcing kernel command line to: %s\n", boot_command_line);
From: Jin Yao yao.jin@linux.intel.com
[ Upstream commit e40647762fb5881360874e08e03e972d58d63c42 ]
A raw PMU event (eventsel+umask) in the form of rNNN is supported by perf but lacks of checking for the validity of raw encoding.
For example, bit 16 and bit 17 are not valid on KBL but perf doesn't report warning when encoding with these bits.
Before:
# ./perf stat -e cpu/r031234/ -a -- sleep 1
Performance counter stats for 'system wide':
0 cpu/r031234/
1.003798924 seconds time elapsed
It may silently measure the wrong event!
The kernel supported bits have been exported through /sys/devices/<pmu>/format/. Perf collects the information to 'struct perf_pmu_format' and links it to 'pmu->format' list.
The 'struct perf_pmu_format' has a bitmap which records the valid bits for this format. For example,
root@kbl-ppc:/sys/devices/cpu/format# cat umask config:8-15
The valid bits (bit8-bit15) are recorded in bitmap of format 'umask'.
We collect total valid bits of all formats, save to a local variable 'masks' and reverse it. Now '~masks' represents total invalid bits.
bits = config & ~masks;
The set bits in 'bits' indicate the invalid bits used in config. Finally we use bitmap_scnprintf to report the invalid bits.
Some architectures may not export supported bits through sysfs, so if masks is 0, perf_pmu__warn_invalid_config directly returns.
After:
Single event without name:
# ./perf stat -e cpu/r031234/ -a -- sleep 1 WARNING: event 'N/A' not valid (bits 16-17 of config '31234' not supported by kernel)!
Performance counter stats for 'system wide':
0 cpu/r031234/
1.001597373 seconds time elapsed
Multiple events with names:
# ./perf stat -e cpu/rf01234,name=aaa/,cpu/r031234,name=bbb/ -a -- sleep 1 WARNING: event 'aaa' not valid (bits 20,22 of config 'f01234' not supported by kernel)! WARNING: event 'bbb' not valid (bits 16-17 of config '31234' not supported by kernel)!
Performance counter stats for 'system wide':
0 aaa 0 bbb
1.001573787 seconds time elapsed
Warnings are reported for invalid bits.
Co-developed-by: Jiri Olsa jolsa@redhat.com Signed-off-by: Jin Yao yao.jin@linux.intel.com Reviewed-by: Jiri Olsa jolsa@redhat.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Andi Kleen ak@linux.intel.com Cc: Jin Yao yao.jin@intel.com Cc: Kan Liang kan.liang@linux.intel.com Cc: Peter Zijlstra peterz@infradead.org Link: http://lore.kernel.org/lkml/20210310051138.12154-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Stable-dep-of: e552b7be12ed ("perf: Skip and warn on unknown format 'configN' attrs") Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/parse-events.c | 3 +++ tools/perf/util/pmu.c | 33 +++++++++++++++++++++++++++++++++ tools/perf/util/pmu.h | 3 +++ 3 files changed, 39 insertions(+)
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index 3a0a7930cd10..36969fc8f1fc 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -356,6 +356,9 @@ __add_event(struct list_head *list, int *idx, struct perf_cpu_map *cpus = pmu ? perf_cpu_map__get(pmu->cpus) : cpu_list ? perf_cpu_map__new(cpu_list) : NULL;
+ if (pmu && attr->type == PERF_TYPE_RAW) + perf_pmu__warn_invalid_config(pmu, attr->config, name); + if (init_attr) event_attr_init(attr);
diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c index d41caeb35cf6..349012f7defb 100644 --- a/tools/perf/util/pmu.c +++ b/tools/perf/util/pmu.c @@ -1716,3 +1716,36 @@ int perf_pmu__caps_parse(struct perf_pmu *pmu)
return nr_caps; } + +void perf_pmu__warn_invalid_config(struct perf_pmu *pmu, __u64 config, + char *name) +{ + struct perf_pmu_format *format; + __u64 masks = 0, bits; + char buf[100]; + unsigned int i; + + list_for_each_entry(format, &pmu->format, list) { + if (format->value != PERF_PMU_FORMAT_VALUE_CONFIG) + continue; + + for_each_set_bit(i, format->bits, PERF_PMU_FORMAT_BITS) + masks |= 1ULL << i; + } + + /* + * Kernel doesn't export any valid format bits. + */ + if (masks == 0) + return; + + bits = config & ~masks; + if (bits == 0) + return; + + bitmap_scnprintf((unsigned long *)&bits, sizeof(bits) * 8, buf, sizeof(buf)); + + pr_warning("WARNING: event '%s' not valid (bits %s of config " + "'%llx' not supported by kernel)!\n", + name ?: "N/A", buf, config); +} diff --git a/tools/perf/util/pmu.h b/tools/perf/util/pmu.h index a64e9c9ce731..d9aa8c958d21 100644 --- a/tools/perf/util/pmu.h +++ b/tools/perf/util/pmu.h @@ -120,4 +120,7 @@ int perf_pmu__convert_scale(const char *scale, char **end, double *sval);
int perf_pmu__caps_parse(struct perf_pmu *pmu);
+void perf_pmu__warn_invalid_config(struct perf_pmu *pmu, __u64 config, + char *name); + #endif /* __PMU_H */
From: Rob Herring robh@kernel.org
[ Upstream commit e552b7be12ed62357df84392efa525ecb01910fb ]
If the kernel exposes a new perf_event_attr field in a format attr, perf will return an error stating the specified PMU can't be found. For example, a format attr with 'config3:0-63' causes an error as config3 is unknown to perf. This causes a compatibility issue between a newer kernel with older perf tool.
Before this change with a kernel adding 'config3' I get:
$ perf record -e arm_spe// -- true event syntax error: 'arm_spe//' ___ Cannot find PMU `arm_spe'. Missing kernel support? Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
After this change, I get:
$ perf record -e arm_spe// -- true WARNING: 'arm_spe_0' format 'inv_event_filter' requires 'perf_event_attr::config3' which is not supported by this version of perf! [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.091 MB perf.data ]
To support unknown configN formats, rework the YACC implementation to pass any config[0-9]+ format to perf_pmu__new_format() to handle with a warning.
Reviewed-by: Namhyung Kim namhyung@kernel.org Signed-off-by: Rob Herring robh@kernel.org Tested-by: Leo Yan leo.yan@linaro.org Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Ingo Molnar mingo@redhat.com Cc: James Clark james.clark@arm.com Cc: Jiri Olsa jolsa@kernel.org Cc: Mark Rutland mark.rutland@arm.com Cc: Peter Zijlstra peterz@infradead.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220914-arm-perf-tool-spe1-2-v2-v4-1-83c098e6212e... Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/parse-events.c | 3 +++ tools/perf/util/pmu.c | 17 +++++++++++++++++ tools/perf/util/pmu.h | 2 ++ tools/perf/util/pmu.l | 2 -- tools/perf/util/pmu.y | 15 ++++----------- 5 files changed, 26 insertions(+), 13 deletions(-)
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index 36969fc8f1fc..c56a4d9c3be9 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -356,6 +356,9 @@ __add_event(struct list_head *list, int *idx, struct perf_cpu_map *cpus = pmu ? perf_cpu_map__get(pmu->cpus) : cpu_list ? perf_cpu_map__new(cpu_list) : NULL;
+ if (pmu) + perf_pmu__warn_invalid_formats(pmu); + if (pmu && attr->type == PERF_TYPE_RAW) perf_pmu__warn_invalid_config(pmu, attr->config, name);
diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c index 349012f7defb..ac45da0302a7 100644 --- a/tools/perf/util/pmu.c +++ b/tools/perf/util/pmu.c @@ -862,6 +862,23 @@ static struct perf_pmu *pmu_lookup(const char *name) return pmu; }
+void perf_pmu__warn_invalid_formats(struct perf_pmu *pmu) +{ + struct perf_pmu_format *format; + + /* fake pmu doesn't have format list */ + if (pmu == &perf_pmu__fake) + return; + + list_for_each_entry(format, &pmu->format, list) + if (format->value >= PERF_PMU_FORMAT_VALUE_CONFIG_END) { + pr_warning("WARNING: '%s' format '%s' requires 'perf_event_attr::config%d'" + "which is not supported by this version of perf!\n", + pmu->name, format->name, format->value); + return; + } +} + static struct perf_pmu *pmu_find(const char *name) { struct perf_pmu *pmu; diff --git a/tools/perf/util/pmu.h b/tools/perf/util/pmu.h index d9aa8c958d21..7d208b850769 100644 --- a/tools/perf/util/pmu.h +++ b/tools/perf/util/pmu.h @@ -15,6 +15,7 @@ enum { PERF_PMU_FORMAT_VALUE_CONFIG, PERF_PMU_FORMAT_VALUE_CONFIG1, PERF_PMU_FORMAT_VALUE_CONFIG2, + PERF_PMU_FORMAT_VALUE_CONFIG_END, };
#define PERF_PMU_FORMAT_BITS 64 @@ -122,5 +123,6 @@ int perf_pmu__caps_parse(struct perf_pmu *pmu);
void perf_pmu__warn_invalid_config(struct perf_pmu *pmu, __u64 config, char *name); +void perf_pmu__warn_invalid_formats(struct perf_pmu *pmu);
#endif /* __PMU_H */ diff --git a/tools/perf/util/pmu.l b/tools/perf/util/pmu.l index a15d9fbd7c0e..58b4926cfaca 100644 --- a/tools/perf/util/pmu.l +++ b/tools/perf/util/pmu.l @@ -27,8 +27,6 @@ num_dec [0-9]+
{num_dec} { return value(10); } config { return PP_CONFIG; } -config1 { return PP_CONFIG1; } -config2 { return PP_CONFIG2; } - { return '-'; } : { return ':'; } , { return ','; } diff --git a/tools/perf/util/pmu.y b/tools/perf/util/pmu.y index bfd7e8509869..283efe059819 100644 --- a/tools/perf/util/pmu.y +++ b/tools/perf/util/pmu.y @@ -20,7 +20,7 @@ do { \
%}
-%token PP_CONFIG PP_CONFIG1 PP_CONFIG2 +%token PP_CONFIG %token PP_VALUE PP_ERROR %type <num> PP_VALUE %type <bits> bit_term @@ -47,18 +47,11 @@ PP_CONFIG ':' bits $3)); } | -PP_CONFIG1 ':' bits +PP_CONFIG PP_VALUE ':' bits { ABORT_ON(perf_pmu__new_format(format, name, - PERF_PMU_FORMAT_VALUE_CONFIG1, - $3)); -} -| -PP_CONFIG2 ':' bits -{ - ABORT_ON(perf_pmu__new_format(format, name, - PERF_PMU_FORMAT_VALUE_CONFIG2, - $3)); + $2, + $4)); }
bits:
From: Pavel Tikhomirov ptikhomirov@virtuozzo.com
[ Upstream commit cc4a3f885e8f2bc3c86a265972e94fef32d68f67 ]
Currently there is no way to differentiate the file with alive owner from the file with dead owner but pid of the owner reused. That's why CRIU can't actually know if it needs to restore file owner or not, because if it restores owner but actual owner was dead, this can introduce unexpected signals to the "false"-owner (which reused the pid).
Let's change the api, so that F_GETOWN(EX) returns 0 in case actual owner is dead already. This comports with the POSIX spec, which states that a PID of 0 indicates that no signal will be sent.
Cc: Jeff Layton jlayton@kernel.org Cc: "J. Bruce Fields" bfields@fieldses.org Cc: Alexander Viro viro@zeniv.linux.org.uk Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Cyrill Gorcunov gorcunov@gmail.com Cc: Andrei Vagin avagin@gmail.com Signed-off-by: Pavel Tikhomirov ptikhomirov@virtuozzo.com Signed-off-by: Jeff Layton jlayton@kernel.org Stable-dep-of: f671a691e299 ("fcntl: fix potential deadlocks for &fown_struct.lock") Signed-off-by: Sasha Levin sashal@kernel.org --- fs/fcntl.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/fs/fcntl.c b/fs/fcntl.c index 71b43538fa44..5a56351f1fc3 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -148,11 +148,15 @@ void f_delown(struct file *filp)
pid_t f_getown(struct file *filp) { - pid_t pid; + pid_t pid = 0; read_lock(&filp->f_owner.lock); - pid = pid_vnr(filp->f_owner.pid); - if (filp->f_owner.pid_type == PIDTYPE_PGID) - pid = -pid; + rcu_read_lock(); + if (pid_task(filp->f_owner.pid, filp->f_owner.pid_type)) { + pid = pid_vnr(filp->f_owner.pid); + if (filp->f_owner.pid_type == PIDTYPE_PGID) + pid = -pid; + } + rcu_read_unlock(); read_unlock(&filp->f_owner.lock); return pid; } @@ -200,11 +204,14 @@ static int f_setown_ex(struct file *filp, unsigned long arg) static int f_getown_ex(struct file *filp, unsigned long arg) { struct f_owner_ex __user *owner_p = (void __user *)arg; - struct f_owner_ex owner; + struct f_owner_ex owner = {}; int ret = 0;
read_lock(&filp->f_owner.lock); - owner.pid = pid_vnr(filp->f_owner.pid); + rcu_read_lock(); + if (pid_task(filp->f_owner.pid, filp->f_owner.pid_type)) + owner.pid = pid_vnr(filp->f_owner.pid); + rcu_read_unlock(); switch (filp->f_owner.pid_type) { case PIDTYPE_PID: owner.type = F_OWNER_TID;
From: Desmond Cheong Zhi Xi desmondcheongzx@gmail.com
[ Upstream commit f671a691e299f58835d4660d642582bf0e8f6fda ]
Syzbot reports a potential deadlock in do_fcntl:
======================================================== WARNING: possible irq lock inversion dependency detected 5.12.0-syzkaller #0 Not tainted -------------------------------------------------------- syz-executor132/8391 just changed the state of lock: ffff888015967bf8 (&f->f_owner.lock){.+..}-{2:2}, at: f_getown_ex fs/fcntl.c:211 [inline] ffff888015967bf8 (&f->f_owner.lock){.+..}-{2:2}, at: do_fcntl+0x8b4/0x1200 fs/fcntl.c:395 but this lock was taken by another, HARDIRQ-safe lock in the past: (&dev->event_lock){-...}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this: Chain exists of: &dev->event_lock --> &new->fa_lock --> &f->f_owner.lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1 ---- ---- lock(&f->f_owner.lock); local_irq_disable(); lock(&dev->event_lock); lock(&new->fa_lock); <Interrupt> lock(&dev->event_lock);
*** DEADLOCK ***
This happens because there is a lock hierarchy of &dev->event_lock --> &new->fa_lock --> &f->f_owner.lock from the following call chain:
input_inject_event(): spin_lock_irqsave(&dev->event_lock,...); input_handle_event(): input_pass_values(): input_to_handler(): evdev_events(): evdev_pass_values(): spin_lock(&client->buffer_lock); __pass_event(): kill_fasync(): kill_fasync_rcu(): read_lock(&fa->fa_lock); send_sigio(): read_lock_irqsave(&fown->lock,...);
However, since &dev->event_lock is HARDIRQ-safe, interrupts have to be disabled while grabbing &f->f_owner.lock, otherwise we invert the lock hierarchy.
Hence, we replace calls to read_lock/read_unlock on &f->f_owner.lock, with read_lock_irq/read_unlock_irq.
Reported-and-tested-by: syzbot+e6d5398a02c516ce5e70@syzkaller.appspotmail.com Signed-off-by: Desmond Cheong Zhi Xi desmondcheongzx@gmail.com Signed-off-by: Jeff Layton jlayton@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/fcntl.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/fs/fcntl.c b/fs/fcntl.c index 5a56351f1fc3..fcf34f83bf6a 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -149,7 +149,8 @@ void f_delown(struct file *filp) pid_t f_getown(struct file *filp) { pid_t pid = 0; - read_lock(&filp->f_owner.lock); + + read_lock_irq(&filp->f_owner.lock); rcu_read_lock(); if (pid_task(filp->f_owner.pid, filp->f_owner.pid_type)) { pid = pid_vnr(filp->f_owner.pid); @@ -157,7 +158,7 @@ pid_t f_getown(struct file *filp) pid = -pid; } rcu_read_unlock(); - read_unlock(&filp->f_owner.lock); + read_unlock_irq(&filp->f_owner.lock); return pid; }
@@ -207,7 +208,7 @@ static int f_getown_ex(struct file *filp, unsigned long arg) struct f_owner_ex owner = {}; int ret = 0;
- read_lock(&filp->f_owner.lock); + read_lock_irq(&filp->f_owner.lock); rcu_read_lock(); if (pid_task(filp->f_owner.pid, filp->f_owner.pid_type)) owner.pid = pid_vnr(filp->f_owner.pid); @@ -230,7 +231,7 @@ static int f_getown_ex(struct file *filp, unsigned long arg) ret = -EINVAL; break; } - read_unlock(&filp->f_owner.lock); + read_unlock_irq(&filp->f_owner.lock);
if (!ret) { ret = copy_to_user(owner_p, &owner, sizeof(owner)); @@ -248,10 +249,10 @@ static int f_getowner_uids(struct file *filp, unsigned long arg) uid_t src[2]; int err;
- read_lock(&filp->f_owner.lock); + read_lock_irq(&filp->f_owner.lock); src[0] = from_kuid(user_ns, filp->f_owner.uid); src[1] = from_kuid(user_ns, filp->f_owner.euid); - read_unlock(&filp->f_owner.lock); + read_unlock_irq(&filp->f_owner.lock);
err = put_user(src[0], &dst[0]); err |= put_user(src[1], &dst[1]);
From: Sibi Sankar sibis@codeaurora.org
commit ef9a5d188d663753e73a3c8e8910ceab8e9305c4 upstream.
The modem firmware memory requirements vary between 32M/140M on no-lte/lte skus respectively, so fixup the modem memory region to reflect the requirements.
Reviewed-by: Evan Green evgreen@chromium.org Signed-off-by: Sibi Sankar sibis@codeaurora.org Link: https://lore.kernel.org/r/1602786476-27833-1-git-send-email-sibis@codeaurora... Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Acked-by: Alex Elder elder@linaro.org Signed-off-by: Stephen Boyd swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi | 4 ++++ arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi @@ -9,6 +9,10 @@ label = "proximity-wifi-lte"; };
+&mpss_mem { + reg = <0x0 0x86000000 0x0 0x8c00000>; +}; + &remoteproc_mpss { firmware-name = "qcom/sc7180-trogdor/modem/mba.mbn", "qcom/sc7180-trogdor/modem/qdsp6sw.mbn"; --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -39,7 +39,7 @@ };
mpss_mem: memory@86000000 { - reg = <0x0 0x86000000 0x0 0x8c00000>; + reg = <0x0 0x86000000 0x0 0x2000000>; no-map; };
From: Conor Dooley conor.dooley@microchip.com
commit 456797da792fa7cbf6698febf275fe9b36691f78 upstream.
arm64's method of defining a default cpu topology requires only minimal changes to apply to RISC-V also. The current arm64 implementation exits early in a uniprocessor configuration by reading MPIDR & claiming that uniprocessor can rely on the default values.
This is appears to be a hangover from prior to '3102bc0e6ac7 ("arm64: topology: Stop using MPIDR for topology information")', because the current code just assigns default values for multiprocessor systems.
With the MPIDR references removed, store_cpu_topolgy() can be moved to the common arch_topology code.
Reviewed-by: Sudeep Holla sudeep.holla@arm.com Acked-by: Catalin Marinas catalin.marinas@arm.com Reviewed-by: Atish Patra atishp@rivosinc.com Signed-off-by: Conor Dooley conor.dooley@microchip.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/kernel/topology.c | 40 ---------------------------------------- drivers/base/arch_topology.c | 19 +++++++++++++++++++ 2 files changed, 19 insertions(+), 40 deletions(-)
--- a/arch/arm64/kernel/topology.c +++ b/arch/arm64/kernel/topology.c @@ -22,46 +22,6 @@ #include <asm/cputype.h> #include <asm/topology.h>
-void store_cpu_topology(unsigned int cpuid) -{ - struct cpu_topology *cpuid_topo = &cpu_topology[cpuid]; - u64 mpidr; - - if (cpuid_topo->package_id != -1) - goto topology_populated; - - mpidr = read_cpuid_mpidr(); - - /* Uniprocessor systems can rely on default topology values */ - if (mpidr & MPIDR_UP_BITMASK) - return; - - /* - * This would be the place to create cpu topology based on MPIDR. - * - * However, it cannot be trusted to depict the actual topology; some - * pieces of the architecture enforce an artificial cap on Aff0 values - * (e.g. GICv3's ICC_SGI1R_EL1 limits it to 15), leading to an - * artificial cycling of Aff1, Aff2 and Aff3 values. IOW, these end up - * having absolutely no relationship to the actual underlying system - * topology, and cannot be reasonably used as core / package ID. - * - * If the MT bit is set, Aff0 *could* be used to define a thread ID, but - * we still wouldn't be able to obtain a sane core ID. This means we - * need to entirely ignore MPIDR for any topology deduction. - */ - cpuid_topo->thread_id = -1; - cpuid_topo->core_id = cpuid; - cpuid_topo->package_id = cpu_to_node(cpuid); - - pr_debug("CPU%u: cluster %d core %d thread %d mpidr %#016llx\n", - cpuid, cpuid_topo->package_id, cpuid_topo->core_id, - cpuid_topo->thread_id, mpidr); - -topology_populated: - update_siblings_masks(cpuid); -} - #ifdef CONFIG_ACPI static bool __init acpi_cpu_is_threaded(int cpu) { --- a/drivers/base/arch_topology.c +++ b/drivers/base/arch_topology.c @@ -596,4 +596,23 @@ void __init init_cpu_topology(void) else if (of_have_populated_dt() && parse_dt_topology()) reset_cpu_topology(); } + +void store_cpu_topology(unsigned int cpuid) +{ + struct cpu_topology *cpuid_topo = &cpu_topology[cpuid]; + + if (cpuid_topo->package_id != -1) + goto topology_populated; + + cpuid_topo->thread_id = -1; + cpuid_topo->core_id = cpuid; + cpuid_topo->package_id = cpu_to_node(cpuid); + + pr_debug("CPU%u: package %d core %d thread %d\n", + cpuid, cpuid_topo->package_id, cpuid_topo->core_id, + cpuid_topo->thread_id); + +topology_populated: + update_siblings_masks(cpuid); +} #endif
From: Conor Dooley conor.dooley@microchip.com
commit fbd92809997a391f28075f1c8b5ee314c225557c upstream.
RISC-V has no sane defaults to fall back on where there is no cpu-map in the devicetree. Without sane defaults, the package, core and thread IDs are all set to -1. This causes user-visible inaccuracies for tools like hwloc/lstopo which rely on the sysfs cpu topology files to detect a system's topology.
On a PolarFire SoC, which should have 4 harts with a thread each, lstopo currently reports:
Machine (793MB total) Package L#0 NUMANode L#0 (P#0 793MB) Core L#0 L1d L#0 (32KB) + L1i L#0 (32KB) + PU L#0 (P#0) L1d L#1 (32KB) + L1i L#1 (32KB) + PU L#1 (P#1) L1d L#2 (32KB) + L1i L#2 (32KB) + PU L#2 (P#2) L1d L#3 (32KB) + L1i L#3 (32KB) + PU L#3 (P#3)
Adding calls to store_cpu_topology() in {boot,smp} hart bringup code results in the correct topolgy being reported:
Machine (793MB total) Package L#0 NUMANode L#0 (P#0 793MB) L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0 + PU L#0 (P#0) L1d L#1 (32KB) + L1i L#1 (32KB) + Core L#1 + PU L#1 (P#1) L1d L#2 (32KB) + L1i L#2 (32KB) + Core L#2 + PU L#2 (P#2) L1d L#3 (32KB) + L1i L#3 (32KB) + Core L#3 + PU L#3 (P#3)
CC: stable@vger.kernel.org # 456797da792f: arm64: topology: move store_cpu_topology() to shared code Fixes: 03f11f03dbfe ("RISC-V: Parse cpu topology during boot.") Reported-by: Brice Goglin Brice.Goglin@inria.fr Link: https://github.com/open-mpi/hwloc/issues/536 Reviewed-by: Sudeep Holla sudeep.holla@arm.com Reviewed-by: Atish Patra atishp@rivosinc.com Signed-off-by: Conor Dooley conor.dooley@microchip.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/riscv/Kconfig | 2 +- arch/riscv/kernel/smpboot.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-)
--- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -35,7 +35,7 @@ config RISCV select CLINT_TIMER if !MMU select COMMON_CLK select EDAC_SUPPORT - select GENERIC_ARCH_TOPOLOGY if SMP + select GENERIC_ARCH_TOPOLOGY select GENERIC_ATOMIC64 if !64BIT select GENERIC_CLOCKEVENTS select GENERIC_EARLY_IOREMAP --- a/arch/riscv/kernel/smpboot.c +++ b/arch/riscv/kernel/smpboot.c @@ -46,6 +46,8 @@ void __init smp_prepare_cpus(unsigned in int cpuid; int ret;
+ store_cpu_topology(smp_processor_id()); + /* This covers non-smp usecase mandated by "nosmp" option */ if (max_cpus == 0) return; @@ -152,8 +154,8 @@ asmlinkage __visible void smp_callin(voi mmgrab(mm); current->active_mm = mm;
+ store_cpu_topology(curr_cpuid); notify_cpu_starting(curr_cpuid); - update_siblings_masks(curr_cpuid); set_cpu_online(curr_cpuid, 1);
/*
From: Adrian Hunter adrian.hunter@intel.com
commit c243cecb58e3905baeace8827201c14df8481e2a upstream.
The requirement for 64-bit address filters is that they are canonical addresses. In other respects any address range is allowed which would include user space addresses.
That can be useful for tracing virtual machine guests because address filtering can be used to advantage in place of current privilege level (CPL) filtering.
Signed-off-by: Adrian Hunter adrian.hunter@intel.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Link: https://lore.kernel.org/r/20220131072453.2839535-2-adrian.hunter@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/events/intel/pt.c | 63 +++++++++++++++++++++++++++++++++++---------- 1 file changed, 50 insertions(+), 13 deletions(-)
--- a/arch/x86/events/intel/pt.c +++ b/arch/x86/events/intel/pt.c @@ -13,6 +13,8 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/types.h> +#include <linux/bits.h> +#include <linux/limits.h> #include <linux/slab.h> #include <linux/device.h>
@@ -1348,11 +1350,37 @@ static void pt_addr_filters_fini(struct event->hw.addr_filters = NULL; }
-static inline bool valid_kernel_ip(unsigned long ip) +#ifdef CONFIG_X86_64 +static u64 canonical_address(u64 vaddr, u8 vaddr_bits) { - return virt_addr_valid(ip) && kernel_ip(ip); + return ((s64)vaddr << (64 - vaddr_bits)) >> (64 - vaddr_bits); }
+static u64 is_canonical_address(u64 vaddr, u8 vaddr_bits) +{ + return canonical_address(vaddr, vaddr_bits) == vaddr; +} + +/* Clamp to a canonical address greater-than-or-equal-to the address given */ +static u64 clamp_to_ge_canonical_addr(u64 vaddr, u8 vaddr_bits) +{ + return is_canonical_address(vaddr, vaddr_bits) ? + vaddr : + -BIT_ULL(vaddr_bits - 1); +} + +/* Clamp to a canonical address less-than-or-equal-to the address given */ +static u64 clamp_to_le_canonical_addr(u64 vaddr, u8 vaddr_bits) +{ + return is_canonical_address(vaddr, vaddr_bits) ? + vaddr : + BIT_ULL(vaddr_bits - 1) - 1; +} +#else +#define clamp_to_ge_canonical_addr(x, y) (x) +#define clamp_to_le_canonical_addr(x, y) (x) +#endif + static int pt_event_addr_filters_validate(struct list_head *filters) { struct perf_addr_filter *filter; @@ -1367,14 +1395,6 @@ static int pt_event_addr_filters_validat filter->action == PERF_ADDR_FILTER_ACTION_START) return -EOPNOTSUPP;
- if (!filter->path.dentry) { - if (!valid_kernel_ip(filter->offset)) - return -EINVAL; - - if (!valid_kernel_ip(filter->offset + filter->size)) - return -EINVAL; - } - if (++range > intel_pt_validate_hw_cap(PT_CAP_num_address_ranges)) return -EOPNOTSUPP; } @@ -1398,9 +1418,26 @@ static void pt_event_addr_filters_sync(s if (filter->path.dentry && !fr[range].start) { msr_a = msr_b = 0; } else { - /* apply the offset */ - msr_a = fr[range].start; - msr_b = msr_a + fr[range].size - 1; + unsigned long n = fr[range].size - 1; + unsigned long a = fr[range].start; + unsigned long b; + + if (a > ULONG_MAX - n) + b = ULONG_MAX; + else + b = a + n; + /* + * Apply the offset. 64-bit addresses written to the + * MSRs must be canonical, but the range can encompass + * non-canonical addresses. Since software cannot + * execute at non-canonical addresses, adjusting to + * canonical addresses does not affect the result of the + * address filter. + */ + msr_a = clamp_to_ge_canonical_addr(a, boot_cpu_data.x86_virt_bits); + msr_b = clamp_to_le_canonical_addr(b, boot_cpu_data.x86_virt_bits); + if (msr_b < msr_a) + msr_a = msr_b = 0; }
filters->filter[range].msr_a = msr_a;
From: Gaurav Kohli gauravkohli@linux.microsoft.com
commit 365e1ececb2905f94cc10a5817c5b644a32a3ae2 upstream.
During vm boot, there might be possibility that vf registration call comes before the vf association from host to vm.
And this might break netvsc vf path, To prevent the same block vf registration until vf bind message comes from host.
Cc: stable@vger.kernel.org Fixes: 00d7ddba11436 ("hv_netvsc: pair VF based on serial number") Reviewed-by: Haiyang Zhang haiyangz@microsoft.com Signed-off-by: Gaurav Kohli gauravkohli@linux.microsoft.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/hyperv/hyperv_net.h | 3 ++- drivers/net/hyperv/netvsc.c | 4 ++++ drivers/net/hyperv/netvsc_drv.c | 20 ++++++++++++++++++++ 3 files changed, 26 insertions(+), 1 deletion(-)
--- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -977,7 +977,8 @@ struct net_device_context { u32 vf_alloc; /* Serial number of the VF to team with */ u32 vf_serial; - + /* completion variable to confirm vf association */ + struct completion vf_add; /* Is the current data path through the VF NIC? */ bool data_path_is_vf;
--- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -1327,6 +1327,10 @@ static void netvsc_send_vf(struct net_de
net_device_ctx->vf_alloc = nvmsg->msg.v4_msg.vf_assoc.allocated; net_device_ctx->vf_serial = nvmsg->msg.v4_msg.vf_assoc.serial; + + if (net_device_ctx->vf_alloc) + complete(&net_device_ctx->vf_add); + netdev_info(ndev, "VF slot %u %s\n", net_device_ctx->vf_serial, net_device_ctx->vf_alloc ? "added" : "removed"); --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -2290,6 +2290,7 @@ static struct net_device *get_netvsc_bys { struct device *parent = vf_netdev->dev.parent; struct net_device_context *ndev_ctx; + struct net_device *ndev; struct pci_dev *pdev; u32 serial;
@@ -2316,6 +2317,18 @@ static struct net_device *get_netvsc_bys return hv_get_drvdata(ndev_ctx->device_ctx); }
+ /* Fallback path to check synthetic vf with + * help of mac addr + */ + list_for_each_entry(ndev_ctx, &netvsc_dev_list, list) { + ndev = hv_get_drvdata(ndev_ctx->device_ctx); + if (ether_addr_equal(vf_netdev->perm_addr, ndev->perm_addr)) { + netdev_notice(vf_netdev, + "falling back to mac addr based matching\n"); + return ndev; + } + } + netdev_notice(vf_netdev, "no netdev found for vf serial:%u\n", serial); return NULL; @@ -2406,6 +2419,11 @@ static int netvsc_vf_changed(struct net_ return NOTIFY_OK; net_device_ctx->data_path_is_vf = vf_is_up;
+ if (vf_is_up && !net_device_ctx->vf_alloc) { + netdev_info(ndev, "Waiting for the VF association from host\n"); + wait_for_completion(&net_device_ctx->vf_add); + } + netvsc_switch_datapath(ndev, vf_is_up); netdev_info(ndev, "Data path switched %s VF: %s\n", vf_is_up ? "to" : "from", vf_netdev->name); @@ -2429,6 +2447,7 @@ static int netvsc_unregister_vf(struct n
netvsc_vf_setxdp(vf_netdev, NULL);
+ reinit_completion(&net_device_ctx->vf_add); netdev_rx_handler_unregister(vf_netdev); netdev_upper_dev_unlink(vf_netdev, ndev); RCU_INIT_POINTER(net_device_ctx->vf_netdev, NULL); @@ -2466,6 +2485,7 @@ static int netvsc_probe(struct hv_device
INIT_DELAYED_WORK(&net_device_ctx->dwork, netvsc_link_change);
+ init_completion(&net_device_ctx->vf_add); spin_lock_init(&net_device_ctx->lock); INIT_LIST_HEAD(&net_device_ctx->reconfig_events); INIT_DELAYED_WORK(&net_device_ctx->vf_takeover, netvsc_vf_setup);
From: Werner Sembach wse@tuxedocomputers.com
commit 3dbc80a3e4c55c4a5b89ef207bed7b7de36157b4 upstream.
This commit is very different from the upstream commit! It fixes the same issue by adding more quirks, rather then the general fix from the 6.1 kernel, because the general fix from the 6.1 kernel is part of a larger refactoring of the backlight code which is not suitable for the stable series.
As described in "ACPI: video: Drop NL5x?U, PF4NU1F and PF5?U?? acpi_backlight=native quirks" (10212754a0d2) the upstream commit "ACPI: video: Make backlight class device registration a separate step (v2)" (3dbc80a3e4c5) makes these quirks unnecessary. However as mentioned in this bugtracker ticket https://bugzilla.kernel.org/show_bug.cgi?id=215683#c17 the upstream fix is part of a larger patchset that is overall too complex for stable.
The TongFang GKxNRxx, GMxNGxx, GMxZGxx, and GMxRGxx / TUXEDO Stellaris/Polaris Gen 1-4, have the same problem as the Clevo NL5xRU and NL5xNU / TUXEDO Aura 15 Gen1 and Gen2: They have a working native and video interface for screen backlight. However the default detection mechanism first registers the video interface before unregistering it again and switching to the native interface during boot. This results in a dangling SBIOS request for backlight change for some reason, causing the backlight to switch to ~2% once per boot on the first power cord connect or disconnect event. Setting the native interface explicitly circumvents this buggy behaviour by avoiding the unregistering process.
Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Werner Sembach wse@tuxedocomputers.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/acpi/video_detect.c | 64 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+)
--- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -501,6 +501,70 @@ static const struct dmi_system_id video_ }, }, /* + * More Tongfang devices with the same issue as the Clevo NL5xRU and + * NL5xNU/TUXEDO Aura 15 Gen1 and Gen2. See the description above. + */ + { + .callback = video_detect_force_native, + .ident = "TongFang GKxNRxx", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GKxNRxx"), + }, + }, + { + .callback = video_detect_force_native, + .ident = "TongFang GKxNRxx", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"), + DMI_MATCH(DMI_BOARD_NAME, "POLARIS1501A1650TI"), + }, + }, + { + .callback = video_detect_force_native, + .ident = "TongFang GKxNRxx", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"), + DMI_MATCH(DMI_BOARD_NAME, "POLARIS1501A2060"), + }, + }, + { + .callback = video_detect_force_native, + .ident = "TongFang GKxNRxx", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"), + DMI_MATCH(DMI_BOARD_NAME, "POLARIS1701A1650TI"), + }, + }, + { + .callback = video_detect_force_native, + .ident = "TongFang GKxNRxx", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"), + DMI_MATCH(DMI_BOARD_NAME, "POLARIS1701A2060"), + }, + }, + { + .callback = video_detect_force_native, + .ident = "TongFang GMxNGxx", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GMxNGxx"), + }, + }, + { + .callback = video_detect_force_native, + .ident = "TongFang GMxZGxx", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GMxZGxx"), + }, + }, + { + .callback = video_detect_force_native, + .ident = "TongFang GMxRGxx", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GMxRGxx"), + }, + }, + /* * Desktops which falsely report a backlight and which our heuristics * for this do not catch. */
From: Nathan Chancellor nathan@kernel.org
commit 33806e7cb8d50379f55c3e8f335e91e1b359dc7b upstream.
A recent change in LLVM made CONFIG_EFI_STUB unselectable because it no longer pretends to support -mabi=ms, breaking the dependency in Kconfig. Lack of CONFIG_EFI_STUB can prevent kernels from booting via EFI in certain circumstances.
This check was added by
8f24f8c2fc82 ("efi/libstub: Annotate firmware routines as __efiapi")
to ensure that __attribute__((ms_abi)) was available, as -mabi=ms is not actually used in any cflags.
According to the GCC documentation, this attribute has been supported since GCC 4.4.7. The kernel currently requires GCC 5.1 so this check is not necessary; even when that change landed in 5.6, the kernel required GCC 4.9 so it was unnecessary then as well.
Clang supports __attribute__((ms_abi)) for all versions that are supported for building the kernel so no additional check is needed. Remove the 'depends on' line altogether to allow CONFIG_EFI_STUB to be selected when CONFIG_EFI is enabled, regardless of compiler.
Fixes: 8f24f8c2fc82 ("efi/libstub: Annotate firmware routines as __efiapi") Signed-off-by: Nathan Chancellor nathan@kernel.org Signed-off-by: Borislav Petkov bp@suse.de Reviewed-by: Nick Desaulniers ndesaulniers@google.com Acked-by: Ard Biesheuvel ardb@kernel.org Cc: stable@vger.kernel.org Link: https://github.com/llvm/llvm-project/commit/d1ad006a8f64bdc17f618deffa9e7c91... [nathan: Fix conflict due to lack of c6dbd3e5e69c in older trees] Signed-off-by: Nathan Chancellor nathan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/Kconfig | 1 - 1 file changed, 1 deletion(-)
--- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1945,7 +1945,6 @@ config EFI config EFI_STUB bool "EFI stub support" depends on EFI && !X86_USE_3DNOW - depends on $(cc-option,-mabi=ms) || X86_32 select RELOCATABLE help This kernel feature allows a bzImage to be loaded directly
From: Nick Desaulniers ndesaulniers@google.com
This is _not_ an upstream commit and just for 5.10.y only. It is based on commit 32ef9e5054ec0321b9336058c58ec749e9c6b0fe upstream.
Alexey reported that the fraction of unknown filename instances in kallsyms grew from ~0.3% to ~10% recently; Bill and Greg tracked it down to assembler defined symbols, which regressed as a result of:
commit b8a9092330da ("Kbuild: do not emit debug info for assembly with LLVM_IAS=1")
In that commit, I allude to restoring debug info for assembler defined symbols in a follow up patch, but it seems I forgot to do so in
commit a66049e2cf0e ("Kbuild: make DWARF version a choice")
Fixes: b8a9092330da ("Kbuild: do not emit debug info for assembly with LLVM_IAS=1") Signed-off-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
--- a/Makefile +++ b/Makefile @@ -842,7 +842,9 @@ else DEBUG_CFLAGS += -g endif
-ifneq ($(LLVM_IAS),1) +ifeq ($(LLVM_IAS),1) +KBUILD_AFLAGS += -g +else KBUILD_AFLAGS += -Wa,-gdwarf-2 endif
From: Avri Altman avri.altman@wdc.com
commit 07d2872bf4c864eb83d034263c155746a2fb7a3b upstream.
Some SD-cards from Sandisk that are SDA-6.0 compliant reports they supports discard, while they actually don't. This might cause mk2fs to fail while trying to format the card and revert it to a read-only mode.
To fix this problem, let's add a card quirk (MMC_QUIRK_BROKEN_SD_DISCARD) to indicate that we shall fall-back to use the legacy erase command instead.
Signed-off-by: Avri Altman avri.altman@wdc.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220928095744.16455-1-avri.altman@wdc.com [Ulf: Updated the commit message] Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mmc/core/block.c | 7 ++++++- drivers/mmc/core/card.h | 6 ++++++ drivers/mmc/core/quirks.h | 6 ++++++ include/linux/mmc/card.h | 1 + 4 files changed, 19 insertions(+), 1 deletion(-)
--- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -1069,6 +1069,11 @@ static void mmc_blk_issue_discard_rq(str nr = blk_rq_sectors(req);
do { + unsigned int erase_arg = card->erase_arg; + + if (mmc_card_broken_sd_discard(card)) + erase_arg = SD_ERASE_ARG; + err = 0; if (card->quirks & MMC_QUIRK_INAND_CMD38) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, @@ -1079,7 +1084,7 @@ static void mmc_blk_issue_discard_rq(str card->ext_csd.generic_cmd6_time); } if (!err) - err = mmc_erase(card, from, nr, card->erase_arg); + err = mmc_erase(card, from, nr, erase_arg); } while (err == -EIO && !mmc_blk_reset(md, card->host, type)); if (err) status = BLK_STS_IOERR; --- a/drivers/mmc/core/card.h +++ b/drivers/mmc/core/card.h @@ -70,6 +70,7 @@ struct mmc_fixup { #define EXT_CSD_REV_ANY (-1u)
#define CID_MANFID_SANDISK 0x2 +#define CID_MANFID_SANDISK_SD 0x3 #define CID_MANFID_ATP 0x9 #define CID_MANFID_TOSHIBA 0x11 #define CID_MANFID_MICRON 0x13 @@ -222,4 +223,9 @@ static inline int mmc_card_broken_hpi(co return c->quirks & MMC_QUIRK_BROKEN_HPI; }
+static inline int mmc_card_broken_sd_discard(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_BROKEN_SD_DISCARD; +} + #endif --- a/drivers/mmc/core/quirks.h +++ b/drivers/mmc/core/quirks.h @@ -99,6 +99,12 @@ static const struct mmc_fixup __maybe_un MMC_FIXUP("V10016", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc, MMC_QUIRK_TRIM_BROKEN),
+ /* + * Some SD cards reports discard support while they don't + */ + MMC_FIXUP(CID_NAME_ANY, CID_MANFID_SANDISK_SD, 0x5344, add_quirk_sd, + MMC_QUIRK_BROKEN_SD_DISCARD), + END_FIXUP };
--- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -270,6 +270,7 @@ struct mmc_card { #define MMC_QUIRK_BROKEN_IRQ_POLLING (1<<11) /* Polling SDIO_CCCR_INTx could create a fake interrupt */ #define MMC_QUIRK_TRIM_BROKEN (1<<12) /* Skip trim */ #define MMC_QUIRK_BROKEN_HPI (1<<13) /* Disable broken HPI support */ +#define MMC_QUIRK_BROKEN_SD_DISCARD (1<<14) /* Disable broken SD discard support */
bool reenable_cmdq; /* Re-enable Command Queue */
From: Yu Kuai yukuai3@huawei.com
commit 285febabac4a16655372d23ff43e89ff6f216691 upstream.
commit 8c5035dfbb94 ("blk-wbt: call rq_qos_add() after wb_normal is initialized") moves wbt_set_write_cache() before rq_qos_add(), which is wrong because wbt_rq_qos() is still NULL.
Fix the problem by removing wbt_set_write_cache() and setting 'rwb->wc' directly. Noted that this patch also remove the redundant setting of 'rab->wc'.
Fixes: 8c5035dfbb94 ("blk-wbt: call rq_qos_add() after wb_normal is initialized") Reported-by: kernel test robot yujie.liu@intel.com Link: https://lore.kernel.org/r/202210081045.77ddf59b-yujie.liu@intel.com Signed-off-by: Yu Kuai yukuai3@huawei.com Reviewed-by: Ming Lei ming.lei@redhat.com Link: https://lore.kernel.org/r/20221009101038.1692875-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- block/blk-wbt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
--- a/block/blk-wbt.c +++ b/block/blk-wbt.c @@ -838,12 +838,11 @@ int wbt_init(struct request_queue *q) rwb->last_comp = rwb->last_issue = jiffies; rwb->win_nsec = RWB_WINDOW_NSEC; rwb->enable_state = WBT_STATE_ON_DEFAULT; - rwb->wc = 1; + rwb->wc = test_bit(QUEUE_FLAG_WC, &q->queue_flags); rwb->rq_depth.default_depth = RWB_DEF_DEPTH; rwb->min_lat_nsec = wbt_default_latency_nsec(q);
wbt_queue_depth_changed(&rwb->rqos); - wbt_set_write_cache(q, test_bit(QUEUE_FLAG_WC, &q->queue_flags));
/* * Assign rwb and add the stats callback.
From: Seth Jenkins sethjenkins@google.com
Commit 258f669e7e88 ("mm: /proc/pid/smaps_rollup: convert to single value seq_file") introduced a null-deref if there are no vma's in the task in show_smaps_rollup.
Fixes: 258f669e7e88 ("mm: /proc/pid/smaps_rollup: convert to single value seq_file") Signed-off-by: Seth Jenkins sethjenkins@google.com Reviewed-by: Alexey Dobriyan adobriyan@gmail.com Tested-by: Alexey Dobriyan adobriyan@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/proc/task_mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -951,7 +951,7 @@ static int show_smaps_rollup(struct seq_ vma = vma->vm_next; }
- show_vma_header_prefix(m, priv->mm->mmap->vm_start, + show_vma_header_prefix(m, priv->mm->mmap ? priv->mm->mmap->vm_start : 0, last_vma_end, 0, 0, 0, 0); seq_pad(m, ' '); seq_puts(m, "[rollup]\n");
On Fri, Oct 28, 2022 at 02:02:57PM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.152 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun, 30 Oct 2022 12:02:13 +0000. Anything received after that time might be too late.
Hi Greg,
5.10.152-rc1 tested.
Run tested on: - Intel Skylake x86_64 (nuc6 i5-6260U)
In addition - build tested for: - Allwinner A64 - Allwinner H3 - Allwinner H5 - Allwinner H6 - Rockchip RK3288 - Rockchip RK3328 - Rockchip RK3399pro
Tested-by: Rudi Heitbaum rudi@heitbaum.com -- Rudi
Hi!
This is the start of the stable review cycle for the 5.10.152 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5...
Tested-by: Pavel Machek (CIP) pavel@denx.de
Best regards, Pavel
Hi Greg,
On Fri, Oct 28, 2022 at 02:02:57PM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.152 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun, 30 Oct 2022 12:02:13 +0000. Anything received after that time might be too late.
Build test (gcc version 11.3.1 20221016): mips: 63 configs -> no failure arm: 104 configs -> no failure arm64: 3 configs -> no failure x86_64: 4 configs -> no failure alpha allmodconfig -> no failure powerpc allmodconfig -> no failure riscv allmodconfig -> no failure s390 allmodconfig -> no failure xtensa allmodconfig -> no failure
Boot test: x86_64: Booted on my test laptop. No regression. x86_64: Booted on qemu. No regression. [1] arm64: Booted on rpi4b (4GB model). No regression. [2]
[1]. https://openqa.qa.codethink.co.uk/tests/2057 [2]. https://openqa.qa.codethink.co.uk/tests/2060
Tested-by: Sudip Mukherjee sudip.mukherjee@codethink.co.uk
On 10/28/22 05:02, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.152 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun, 30 Oct 2022 12:02:13 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.152-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below.
thanks,
greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:
Tested-by: Florian Fainelli f.fainelli@gmail.com
On Fri, Oct 28, 2022 at 02:02:57PM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.152 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun, 30 Oct 2022 12:02:13 +0000. Anything received after that time might be too late.
Build results: total: 163 pass: 163 fail: 0 Qemu test results: total: 475 pass: 475 fail: 0
Tested-by: Guenter Roeck linux@roeck-us.net
Guenter
On Fri, 28 Oct 2022 at 17:34, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.10.152 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun, 30 Oct 2022 12:02:13 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.152-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro's test farm. No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing lkft@linaro.org
## Build * kernel: 5.10.152-rc1 * git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc * git branch: linux-5.10.y * git commit: 04a0124fa82b58226455ad4662246e6ff8c53bb0 * git describe: v5.10.150-80-g04a0124fa82b * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10....
## No Test Regressions (compared to v5.10.149-391-gb4f4370de958)
## No Metric Regressions (compared to v5.10.149-391-gb4f4370de958)
## No Test Fixes (compared to v5.10.149-391-gb4f4370de958)
## No Metric Fixes (compared to v5.10.149-391-gb4f4370de958)
## Test result summary total: 132774, pass: 112586, fail: 2626, skip: 17166, xfail: 396
## Build Summary * arc: 4 total, 4 passed, 0 failed * arm: 113 total, 112 passed, 1 failed * arm64: 33 total, 31 passed, 2 failed * i386: 26 total, 24 passed, 2 failed * mips: 22 total, 22 passed, 0 failed * parisc: 5 total, 5 passed, 0 failed * powerpc: 24 total, 20 passed, 4 failed * riscv: 7 total, 7 passed, 0 failed * s390: 5 total, 5 passed, 0 failed * sh: 8 total, 8 passed, 0 failed * sparc: 4 total, 4 passed, 0 failed * x86_64: 37 total, 35 passed, 2 failed
## Test suites summary * fwts * kselftest-android * kselftest-arm64 * kselftest-arm64/arm64.btitest.bti_c_func * kselftest-arm64/arm64.btitest.bti_j_func * kselftest-arm64/arm64.btitest.bti_jc_func * kselftest-arm64/arm64.btitest.bti_none_func * kselftest-arm64/arm64.btitest.nohint_func * kselftest-arm64/arm64.btitest.paciasp_func * kselftest-arm64/arm64.nobtitest.bti_c_func * kselftest-arm64/arm64.nobtitest.bti_j_func * kselftest-arm64/arm64.nobtitest.bti_jc_func * kselftest-arm64/arm64.nobtitest.bti_none_func * kselftest-arm64/arm64.nobtitest.nohint_func * kselftest-arm64/arm64.nobtitest.paciasp_func * kselftest-breakpoints * kselftest-capabilities * kselftest-drivers-dma-buf * kselftest-efivarfs * kselftest-filesystems * kselftest-filesystems-binderfs * kselftest-firmware * kselftest-fpu * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-livepatch * kselftest-membarrier * kselftest-memfd * kselftest-memory-hotplug * kselftest-mincore * kselftest-mount * kselftest-mqueue * kselftest-net * kselftest-net-forwarding * kselftest-net-mptcp * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-vm * kselftest-x86 * kselftest-zram * kunit * kvm-unit-tests * libgpiod * libhugetlbfs * log-parser-boot * log-parser-test * ltp-cap_bounds * ltp-commands * ltp-containers * ltp-controllers * ltp-cpuhotplug * ltp-crypto * ltp-cve * ltp-dio * ltp-fcntl-locktests * ltp-filecaps * ltp-fs * ltp-fs_bind * ltp-fs_perms_simple * ltp-fsx * ltp-hugetlb * ltp-io * ltp-ipc * ltp-math * ltp-mm * ltp-nptl * ltp-open-posix-tests * ltp-pty * ltp-sched * ltp-securebits * ltp-smoke * ltp-syscalls * ltp-tracing * network-basic-tests * packetdrill * perf * perf/Zstd-perf.data-compression * rcutorture * v4l2-compliance * vdso
-- Linaro LKFT https://lkft.linaro.org
linux-stable-mirror@lists.linaro.org