Hi,
I've found a regression in the ast driver, for AST2600 hardware.
before the upstream commit f9bd00e0ea9d https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
The ast driver handled AST 2600 chip like an AST 2500.
After this commit, it uses some default values, more like the older AST chip.
There are a lot of places in the driver like this: https://elixir.bootlin.com/linux/v5.18.1/source/drivers/gpu/drm/ast/ast_post... where it checks for (AST2300 || AST2400 || AST2500) but not for AST2600.
This makes the VGA output, to be blurred and flickered with whites lines on AST2600.
The issue is present since v5.11
For v5.11~v5.17 I propose a simple workaround (as there are no other reference to AST2600 in the driver): --- a/drivers/gpu/drm/ast/ast_main.c +++ b/drivers/gpu/drm/ast/ast_main.c @@ -146,7 +146,8 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
/* Identify chipset */ if (pdev->revision >= 0x50) { - ast->chip = AST2600; + /* Workaround to use the same codepath for AST2600 */ + ast->chip = AST2500; drm_info(dev, "AST 2600 detected\n"); } else if (pdev->revision >= 0x40) { ast->chip = AST2500;
starting from v5.18, there is another reference to AST2600 in the code https://elixir.bootlin.com/linux/v5.18/source/drivers/gpu/drm/ast/ast_main.c...
So I think someone with good aspeed knowledge should review all locations where there is a test for AST2500, and figure out what should be done for AST2600
Thanks,
Hi Jocelyn,
thanks for reporting this bug.
Am 01.06.22 um 11:33 schrieb Jocelyn Falempe:
Hi,
I've found a regression in the ast driver, for AST2600 hardware.
before the upstream commit f9bd00e0ea9d https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
The ast driver handled AST 2600 chip like an AST 2500.
After this commit, it uses some default values, more like the older AST chip.
There are a lot of places in the driver like this: https://elixir.bootlin.com/linux/v5.18.1/source/drivers/gpu/drm/ast/ast_post...
where it checks for (AST2300 || AST2400 || AST2500) but not for AST2600.
This makes the VGA output, to be blurred and flickered with whites lines on AST2600.
The issue is present since v5.11
For v5.11~v5.17 I propose a simple workaround (as there are no other reference to AST2600 in the driver): --- a/drivers/gpu/drm/ast/ast_main.c +++ b/drivers/gpu/drm/ast/ast_main.c @@ -146,7 +146,8 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
/* Identify chipset */ if (pdev->revision >= 0x50) { - ast->chip = AST2600; + /* Workaround to use the same codepath for AST2600 */ + ast->chip = AST2500;
The whole handling of different models in this driver is broken by design and needs to be replaced. I don't have much of the affected hardware, so such things are going slowly. :(
For an intermediate fix, it would be better to change all tests for AST2500 to include AST2600 as well. There aren't too many IIRC.
Best regards Thomas
drm_info(dev, "AST 2600 detected\n"); } else if (pdev->revision >= 0x40) { ast->chip = AST2500;
starting from v5.18, there is another reference to AST2600 in the code https://elixir.bootlin.com/linux/v5.18/source/drivers/gpu/drm/ast/ast_main.c...
So I think someone with good aspeed knowledge should review all locations where there is a test for AST2500, and figure out what should be done for AST2600
Thanks,
On 01/06/2022 12:33, Thomas Zimmermann wrote:
Hi Jocelyn,
thanks for reporting this bug.
Am 01.06.22 um 11:33 schrieb Jocelyn Falempe:
Hi,
I've found a regression in the ast driver, for AST2600 hardware.
before the upstream commit f9bd00e0ea9d https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
The ast driver handled AST 2600 chip like an AST 2500.
After this commit, it uses some default values, more like the older AST chip.
There are a lot of places in the driver like this: https://elixir.bootlin.com/linux/v5.18.1/source/drivers/gpu/drm/ast/ast_post...
where it checks for (AST2300 || AST2400 || AST2500) but not for AST2600.
This makes the VGA output, to be blurred and flickered with whites lines on AST2600.
The issue is present since v5.11
For v5.11~v5.17 I propose a simple workaround (as there are no other reference to AST2600 in the driver): --- a/drivers/gpu/drm/ast/ast_main.c +++ b/drivers/gpu/drm/ast/ast_main.c @@ -146,7 +146,8 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
/* Identify chipset */ if (pdev->revision >= 0x50) { - ast->chip = AST2600; + /* Workaround to use the same codepath for AST2600 */ + ast->chip = AST2500;
The whole handling of different models in this driver is broken by design and needs to be replaced. I don't have much of the affected hardware, so such things are going slowly. :(
For an intermediate fix, it would be better to change all tests for AST2500 to include AST2600 as well. There aren't too many IIRC.
I feel a bit uncomfortable doing this, because I don't know if this settings are good for AST2600 or not. I just know that AST2500 settings are better than the "default".
Also it may not apply cleanly up to v5.11
I will do a test patch and see what it gives.
Another solution would be to just revert f9bd00e0ea9d for v5.11 to v5.17 ?
Best regards,
Hi, this is your Linux kernel regression tracker.
On 01.06.22 14:29, Jocelyn Falempe wrote:
On 01/06/2022 12:33, Thomas Zimmermann wrote:
Am 01.06.22 um 11:33 schrieb Jocelyn Falempe:
I've found a regression in the ast driver, for AST2600 hardware.
before the upstream commit f9bd00e0ea9d https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
The ast driver handled AST 2600 chip like an AST 2500.
After this commit, it uses some default values, more like the older AST chip.
There are a lot of places in the driver like this: https://elixir.bootlin.com/linux/v5.18.1/source/drivers/gpu/drm/ast/ast_post...
where it checks for (AST2300 || AST2400 || AST2500) but not for AST2600.
This makes the VGA output, to be blurred and flickered with whites lines on AST2600.
The issue is present since v5.11
For v5.11~v5.17 I propose a simple workaround (as there are no other reference to AST2600 in the driver): --- a/drivers/gpu/drm/ast/ast_main.c +++ b/drivers/gpu/drm/ast/ast_main.c @@ -146,7 +146,8 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
/* Identify chipset */ if (pdev->revision >= 0x50) { - ast->chip = AST2600; + /* Workaround to use the same codepath for AST2600 */ + ast->chip = AST2500;
The whole handling of different models in this driver is broken by design and needs to be replaced. I don't have much of the affected hardware, so such things are going slowly. :(
For an intermediate fix, it would be better to change all tests for AST2500 to include AST2600 as well. There aren't too many IIRC.
I feel a bit uncomfortable doing this, because I don't know if this settings are good for AST2600 or not. I just know that AST2500 settings are better than the "default".
KuoHsiang Chou, you wrote the commit causing this regression. Could you maybe take care of the idea Thomas outlined to get this fixed relative quickly? Or do you have a better idea?
Also it may not apply cleanly up to v5.11
FWIW, 5.11 is EOL anyway.
I will do a test patch and see what it gives.
Another solution would be to just revert f9bd00e0ea9d for v5.11 to v5.17 ?
That might cause a regression for users that depend on something supported thx to this change. :-/
Ciao, Thorsten
Hi
Am 07.06.22 um 13:02 schrieb Thorsten Leemhuis:
Hi, this is your Linux kernel regression tracker.
On 01.06.22 14:29, Jocelyn Falempe wrote:
On 01/06/2022 12:33, Thomas Zimmermann wrote:
Am 01.06.22 um 11:33 schrieb Jocelyn Falempe:
I've found a regression in the ast driver, for AST2600 hardware.
before the upstream commit f9bd00e0ea9d https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
The ast driver handled AST 2600 chip like an AST 2500.
After this commit, it uses some default values, more like the older AST chip.
There are a lot of places in the driver like this: https://elixir.bootlin.com/linux/v5.18.1/source/drivers/gpu/drm/ast/ast_post...
where it checks for (AST2300 || AST2400 || AST2500) but not for AST2600.
This makes the VGA output, to be blurred and flickered with whites lines on AST2600.
The issue is present since v5.11
For v5.11~v5.17 I propose a simple workaround (as there are no other reference to AST2600 in the driver): --- a/drivers/gpu/drm/ast/ast_main.c +++ b/drivers/gpu/drm/ast/ast_main.c @@ -146,7 +146,8 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
/* Identify chipset */ if (pdev->revision >= 0x50) { - ast->chip = AST2600; + /* Workaround to use the same codepath for AST2600 */ + ast->chip = AST2500;
The whole handling of different models in this driver is broken by design and needs to be replaced. I don't have much of the affected hardware, so such things are going slowly. :(
For an intermediate fix, it would be better to change all tests for AST2500 to include AST2600 as well. There aren't too many IIRC.
I feel a bit uncomfortable doing this, because I don't know if this settings are good for AST2600 or not. I just know that AST2500 settings are better than the "default".
KuoHsiang Chou, you wrote the commit causing this regression. Could you maybe take care of the idea Thomas outlined to get this fixed relative quickly? Or do you have a better idea?
Thanks for the reminder. I've sent out a patch for this problem. [1]
Best regards Thomas
[1] https://lore.kernel.org/dri-devel/20220607120248.31716-1-tzimmermann@suse.de...
Also it may not apply cleanly up to v5.11
FWIW, 5.11 is EOL anyway.
I will do a test patch and see what it gives.
Another solution would be to just revert f9bd00e0ea9d for v5.11 to v5.17 ?
That might cause a regression for users that depend on something supported thx to this change. :-/
Ciao, Thorsten
linux-stable-mirror@lists.linaro.org
-
Jocelyn Falempe -
Thomas Zimmermann -
Thorsten Leemhuis