[PATCH AUTOSEL 4.9 1/5] serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()
From: Lukas Wunner lukas@wunner.de
[ Upstream commit 038ee49fef18710bedd38b531d173ccd746b2d8d ]
RS485-enabled UART ports on TI Sitara SoCs with active-low polarity exhibit a Transmit Enable glitch on ->set_termios():
omap8250_restore_regs(), which is called from omap_8250_set_termios(), sets the TCRTLR bit in the MCR register and clears all other bits, including RTS. If RTS uses active-low polarity, it is now asserted for no reason.
The TCRTLR bit is subsequently cleared by writing up->mcr to the MCR register. That variable is always zero, so the RTS bit is still cleared (incorrectly so if RTS is active-high).
(up->mcr is not, as one might think, a cache of the MCR register's current value. Rather, it only caches a single bit of that register, the AFE bit. And it only does so if the UART supports the AFE bit, which OMAP does not. For details see serial8250_do_set_termios() and serial8250_do_set_mctrl().)
Finally at the end of omap8250_restore_regs(), the MCR register is restored (and RTS deasserted) by a call to up->port.ops->set_mctrl() (which equals serial8250_set_mctrl()) and serial8250_em485_stop_tx().
So there's an RTS glitch between setting TCRTLR and calling serial8250_em485_stop_tx(). Avoid by using a read-modify-write when setting TCRTLR.
While at it, drop a redundant initialization of up->mcr. As explained above, the variable isn't used by the driver and it is already initialized to zero because it is part of the static struct serial8250_ports[] declared in 8250_core.c. (Static structs are initialized to zero per section 6.7.8 nr. 10 of the C99 standard.)
Cc: Jan Kiszka jan.kiszka@siemens.com Cc: Su Bao Cheng baocheng.su@siemens.com Tested-by: Matthias Schiffer matthias.schiffer@ew.tq-group.com Signed-off-by: Lukas Wunner lukas@wunner.de Link: https://lore.kernel.org/r/6554b0241a2c7fd50f32576fdbafed96709e11e8.166427894... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/8250/8250_omap.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index c551407bee07..7795e6401a93 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -259,6 +259,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) { struct omap8250_priv *priv = up->port.private_data; struct uart_8250_dma *dma = up->dma; + u8 mcr = serial8250_in_MCR(up);
if (dma && dma->tx_running) { /* @@ -275,7 +276,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_EFR, UART_EFR_ECB);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial8250_out_MCR(up, UART_MCR_TCRTLR); + serial8250_out_MCR(up, mcr | UART_MCR_TCRTLR); serial_out(up, UART_FCR, up->fcr);
omap8250_update_scr(up, priv); @@ -291,7 +292,8 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_LCR, 0);
/* drop TCR + TLR access, we setup XON/XOFF later */ - serial8250_out_MCR(up, up->mcr); + serial8250_out_MCR(up, mcr); + serial_out(up, UART_IER, up->ier);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); @@ -600,7 +602,6 @@ static int omap_8250_startup(struct uart_port *port)
pm_runtime_get_sync(port->dev);
- up->mcr = 0; serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
serial_out(up, UART_LCR, UART_LCR_WLEN8);
From: ruanjinjie ruanjinjie@huawei.com
[ Upstream commit c53717e1e3f0d0f9129b2e0dbc6dcc5e0a8132e9 ]
free_irq() is missing in case of error in platform_pci_probe(), fix that.
Signed-off-by: ruanjinjie ruanjinjie@huawei.com Reviewed-by: Oleksandr Tyshchenko oleksandr_tyshchenko@epam.com Link: https://lore.kernel.org/r/20221114112124.1965611-1-ruanjinjie@huawei.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/platform-pci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c index cf9666680c8c..20365b01c36b 100644 --- a/drivers/xen/platform-pci.c +++ b/drivers/xen/platform-pci.c @@ -149,7 +149,7 @@ static int platform_pci_probe(struct pci_dev *pdev, if (ret) { dev_warn(&pdev->dev, "Unable to set the evtchn callback " "err=%d\n", ret); - goto out; + goto irq_out; } }
@@ -157,7 +157,7 @@ static int platform_pci_probe(struct pci_dev *pdev, grant_frames = alloc_xen_mmio(PAGE_SIZE * max_nr_gframes); ret = gnttab_setup_auto_xlat_frames(grant_frames); if (ret) - goto out; + goto irq_out; ret = gnttab_init(); if (ret) goto grant_out; @@ -165,6 +165,9 @@ static int platform_pci_probe(struct pci_dev *pdev, return 0; grant_out: gnttab_free_auto_xlat_frames(); +irq_out: + if (!xen_have_vector_callback) + free_irq(pdev->irq, pdev); out: pci_release_region(pdev, 0); mem_out:
From: Xiongfeng Wang wangxiongfeng2@huawei.com
[ Upstream commit d0cdd85046b15089df71a50548617ac1025300d0 ]
pci_get_device() will increase the reference count for the returned pci_dev. We need to use pci_dev_put() to decrease the reference count before asus_wmi_set_xusb2pr() returns.
Signed-off-by: Xiongfeng Wang wangxiongfeng2@huawei.com Link: https://lore.kernel.org/r/20221111100752.134311-1-wangxiongfeng2@huawei.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/asus-wmi.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 4ae758c3d8ba..9f6e462c57fe 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -1111,6 +1111,8 @@ static void asus_wmi_set_xusb2pr(struct asus_wmi *asus) pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, cpu_to_le32(ports_available));
+ pci_dev_put(xhci_pdev); + pr_info("set USB_INTEL_XUSB2PR old: 0x%04x, new: 0x%04x\n", orig_ports_available, ports_available); }
From: Gleb Mazovetskiy glex.spb@gmail.com
[ Upstream commit aeac4ec8f46d610a10adbaeff5e2edf6a88ffc62 ]
On embedded systems with little memory and no relevant security concerns, it is beneficial to reduce the size of the table.
Reducing the size from 2^16 to 2^8 saves 255 KiB of kernel RAM.
Makes the table size configurable as an expert option.
The size was previously increased from 2^8 to 2^16 in commit 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16").
Signed-off-by: Gleb Mazovetskiy glex.spb@gmail.com Reviewed-by: Kuniyuki Iwashima kuniyu@amazon.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/Kconfig | 10 ++++++++++ net/ipv4/inet_hashtables.c | 10 +++++----- 2 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index 4d265d4a0dbe..29be5bcbe7ac 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -371,6 +371,16 @@ config INET_IPCOMP
If unsure, say Y.
+config INET_TABLE_PERTURB_ORDER + int "INET: Source port perturbation table size (as power of 2)" if EXPERT + default 16 + help + Source port perturbation table size (as power of 2) for + RFC 6056 3.3.4. Algorithm 4: Double-Hash Port Selection Algorithm. + + The default is almost always what you want. + Only change this if you know what you are doing. + config INET_XFRM_TUNNEL tristate select INET_TUNNEL diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index db47e1c407d9..9958850b6cee 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -541,13 +541,13 @@ EXPORT_SYMBOL_GPL(inet_unhash); * Note that we use 32bit integers (vs RFC 'short integers') * because 2^16 is not a multiple of num_ephemeral and this * property might be used by clever attacker. + * * RFC claims using TABLE_LENGTH=10 buckets gives an improvement, though - * attacks were since demonstrated, thus we use 65536 instead to really - * give more isolation and privacy, at the expense of 256kB of kernel - * memory. + * attacks were since demonstrated, thus we use 65536 by default instead + * to really give more isolation and privacy, at the expense of 256kB + * of kernel memory. */ -#define INET_TABLE_PERTURB_SHIFT 16 -#define INET_TABLE_PERTURB_SIZE (1 << INET_TABLE_PERTURB_SHIFT) +#define INET_TABLE_PERTURB_SIZE (1 << CONFIG_INET_TABLE_PERTURB_ORDER) static u32 *table_perturb;
int __inet_hash_connect(struct inet_timewait_death_row *death_row,
From: Enrico Sau enrico.sau@gmail.com
[ Upstream commit e103ba33998d0f25653cc8ebe745b68d1ee10cda ]
Add the following Telit LE910C4-WWX composition:
0x103a: rmnet
Signed-off-by: Enrico Sau enrico.sau@gmail.com Acked-by: Bjørn Mork bjorn@mork.no Link: https://lore.kernel.org/r/20221115105859.14324-1-enrico.sau@gmail.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 547693118606..62eb45a819e7 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -926,6 +926,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1031, 3)}, /* Telit LE910C1-EUX */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x103a, 0)}, /* Telit LE910C4-WWX */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)}, /* Telit FN980 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)}, /* Telit LN920 */
linux-stable-mirror@lists.linaro.org
-
Sasha Levin