Back when the CRD support was brought up, the usb_2 controller didn't have anything connected to it in order to test it properly, so it was never enabled.

On the Lenovo ThinkPad T14s, the usb_2 controller has the fingerprint controller connected to it. So enabling it, proved that the interrupts lines were wrong from the start.

Fix both the pwr_event and the DWC ctrl_irq lines, according to documentation.

Fixes: 4af46b7bd66f ("arm64: dts: qcom: x1e80100: Add USB nodes") Cc: stable@vger.kernel.org # 6.9 Signed-off-by: Abel Vesa abel.vesa@linaro.org --- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index e2f1873296ec7b7ffdb4c57b5c9d5b09368de168..1c3ad5ae0a41ea235cb176095cd49de7fa89ae4a 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -4631,7 +4631,7 @@ usb_2: usb@a2f8800 { <&gcc GCC_USB20_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>;

- interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, <&pdc 50 IRQ_TYPE_EDGE_BOTH>, <&pdc 49 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "pwr_event", @@ -4657,7 +4657,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, usb_2_dwc3: usb@a200000 { compatible = "snps,dwc3"; reg = <0 0x0a200000 0 0xcd00>; - interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; iommus = <&apps_smmu 0x14e0 0x0>; phys = <&usb_2_hsphy>; phy-names = "usb2-phy";

--- base-commit: 7b4b9bf203da94fbeac75ed3116c84aa03e74578 change-id: 20250107-x1e80100-fix-usb2-controller-irqs-b226a747f73a

Best regards,