The fourth interrupt on SCI port is transmit end interrupt compared to the break interrupt on other port types. So, shuffle the interrupts to fix the transmit end interrupt handler.

Fixes: e1d0be616186 ("sh-sci: Add h8300 SCI") Cc: stable@vger.kernel.org Suggested-by: Geert Uytterhoeven geert+renesas@glider.be Signed-off-by: Biju Das biju.das.jz@bp.renesas.com --- v3->v4: * No change. v2->v3: * Cced stable@vger.kernel.org v1->v2: * Replaced the wrong fixes tag * Added a simpler check in sci_init_single() and added a check in probe to catch invalid interrupt count. Tested the SCI0 interface on RZ/G2UL by connecting to PMOD USBUART. 39: 0 GICv3 437 Level 1004d000.serial:rx err 40: 12 GICv3 438 Edge 1004d000.serial:rx full 41: 70 GICv3 439 Edge 1004d000.serial:tx empty 42: 18 GICv3 440 Level 1004d000.serial:tx end --- drivers/tty/serial/sh-sci.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index af4a7a865764..616041faab55 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -31,6 +31,7 @@ #include <linux/ioport.h> #include <linux/ktime.h> #include <linux/major.h> +#include <linux/minmax.h> #include <linux/module.h> #include <linux/mm.h> #include <linux/of.h> @@ -2864,6 +2865,13 @@ static int sci_init_single(struct platform_device *dev, sci_port->irqs[i] = platform_get_irq(dev, i); }

+ /* + * The fourth interrupt on SCI port is transmit end interrupt, so + * shuffle the interrupts. + */ + if (p->type == PORT_SCI) + swap(sci_port->irqs[SCIx_BRI_IRQ], sci_port->irqs[SCIx_TEI_IRQ]); + /* The SCI generates several interrupts. They can be muxed together or * connected to different interrupt lines. In the muxed case only one * interrupt resource is specified as there is only one interrupt ID.