From: Conor Dooley conor.dooley@microchip.com

At present, where repeated sends are intended to be used, the i2c-microchip-core driver sends a stop followed by a start. Lots of i2c devices must not malfunction in the face of this behaviour, because the driver has operated like this for years! Try to keep track of whether or not a repeated send is required, and suppress sending a stop in these cases.

CC: stable@vger.kernel.org Fixes: 64a6f1c4987e ("i2c: add support for microchip fpga i2c controllers") Signed-off-by: Conor Dooley conor.dooley@microchip.com --- drivers/i2c/busses/i2c-microchip-corei2c.c | 124 ++++++++++++++++----- 1 file changed, 96 insertions(+), 28 deletions(-)

diff --git a/drivers/i2c/busses/i2c-microchip-corei2c.c b/drivers/i2c/busses/i2c-microchip-corei2c.c index 0b0a1c4d17ca..e5af38dfaa81 100644 --- a/drivers/i2c/busses/i2c-microchip-corei2c.c +++ b/drivers/i2c/busses/i2c-microchip-corei2c.c @@ -93,27 +93,35 @@ * @base: pointer to register struct * @dev: device reference * @i2c_clk: clock reference for i2c input clock + * @msg_queue: pointer to the messages requiring sending * @buf: pointer to msg buffer for easier use * @msg_complete: xfer completion object * @adapter: core i2c abstraction * @msg_err: error code for completed message * @bus_clk_rate: current i2c bus clock rate * @isr_status: cached copy of local ISR status + * @total_num: total number of messages to be sent/received + * @current_num: index of the current message being sent/received * @msg_len: number of bytes transferred in msg * @addr: address of the current slave + * @restart_needed: whether or not a repeated start is required after current message */ struct mchp_corei2c_dev { void __iomem *base; struct device *dev; struct clk *i2c_clk; + struct i2c_msg *msg_queue; u8 *buf; struct completion msg_complete; struct i2c_adapter adapter; int msg_err; + int total_num; + int current_num; u32 bus_clk_rate; u32 isr_status; u16 msg_len; u8 addr; + bool restart_needed; };

static void mchp_corei2c_core_disable(struct mchp_corei2c_dev *idev) @@ -222,6 +230,47 @@ static int mchp_corei2c_fill_tx(struct mchp_corei2c_dev *idev) return 0; }

+static void mchp_corei2c_next_msg(struct mchp_corei2c_dev *idev) +{ + struct i2c_msg *this_msg; + u8 ctrl; + + if (idev->current_num >= idev->total_num) { + complete(&idev->msg_complete); + return; + } + + /* + * If there's been an error, the isr needs to return control + * to the "main" part of the driver, so as not to keep sending + * messages once it completes and clears the SI bit. + */ + if (idev->msg_err) { + complete(&idev->msg_complete); + return; + } + + this_msg = idev->msg_queue++; + + if (idev->current_num < (idev->total_num - 1)) { + struct i2c_msg *next_msg = idev->msg_queue; + + idev->restart_needed = next_msg->flags & I2C_M_RD; + } else { + idev->restart_needed = false; + } + + idev->addr = i2c_8bit_addr_from_msg(this_msg); + idev->msg_len = this_msg->len; + idev->buf = this_msg->buf; + + ctrl = readb(idev->base + CORE_I2C_CTRL); + ctrl |= CTRL_STA; + writeb(ctrl, idev->base + CORE_I2C_CTRL); + + idev->current_num++; +} + static irqreturn_t mchp_corei2c_handle_isr(struct mchp_corei2c_dev *idev) { u32 status = idev->isr_status; @@ -247,10 +296,14 @@ static irqreturn_t mchp_corei2c_handle_isr(struct mchp_corei2c_dev *idev) break; case STATUS_M_SLAW_ACK: case STATUS_M_TX_DATA_ACK: - if (idev->msg_len > 0) + if (idev->msg_len > 0) { mchp_corei2c_fill_tx(idev); - else - last_byte = true; + } else { + if (idev->restart_needed) + finished = true; + else + last_byte = true; + } break; case STATUS_M_TX_DATA_NACK: case STATUS_M_SLAR_NACK: @@ -287,7 +340,7 @@ static irqreturn_t mchp_corei2c_handle_isr(struct mchp_corei2c_dev *idev) mchp_corei2c_stop(idev);

if (last_byte || finished) - complete(&idev->msg_complete); + mchp_corei2c_next_msg(idev);

return IRQ_HANDLED; } @@ -311,21 +364,48 @@ static irqreturn_t mchp_corei2c_isr(int irq, void *_dev) return ret; }

-static int mchp_corei2c_xfer_msg(struct mchp_corei2c_dev *idev, - struct i2c_msg *msg) +static int mchp_corei2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, + int num) { - u8 ctrl; + struct mchp_corei2c_dev *idev = i2c_get_adapdata(adap); + struct i2c_msg *this_msg = msgs; unsigned long time_left; - - idev->addr = i2c_8bit_addr_from_msg(msg); - idev->msg_len = msg->len; - idev->buf = msg->buf; - idev->msg_err = 0; - - reinit_completion(&idev->msg_complete); + u8 ctrl;

mchp_corei2c_core_enable(idev);

+ /* + * The isr controls the flow of a transfer, this info needs to be saved + * to a location that it can access the queue information from. + */ + idev->restart_needed = false; + idev->msg_queue = msgs; + idev->total_num = num; + idev->current_num = 0; + + /* + * But the first entry to the isr is triggered by the start in this + * function, so the first message needs to be "dequeued". + */ + idev->addr = i2c_8bit_addr_from_msg(this_msg); + idev->msg_len = this_msg->len; + idev->buf = this_msg->buf; + idev->msg_err = 0; + + if (idev->total_num > 1) { + struct i2c_msg *next_msg = msgs + 1; + + idev->restart_needed = next_msg->flags & I2C_M_RD; + } + + idev->current_num++; + idev->msg_queue++; + + reinit_completion(&idev->msg_complete); + + /* + * Send the first start to pass control to the isr + */ ctrl = readb(idev->base + CORE_I2C_CTRL); ctrl |= CTRL_STA; writeb(ctrl, idev->base + CORE_I2C_CTRL); @@ -335,20 +415,8 @@ static int mchp_corei2c_xfer_msg(struct mchp_corei2c_dev *idev, if (!time_left) return -ETIMEDOUT;

- return idev->msg_err; -} - -static int mchp_corei2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, - int num) -{ - struct mchp_corei2c_dev *idev = i2c_get_adapdata(adap); - int i, ret; - - for (i = 0; i < num; i++) { - ret = mchp_corei2c_xfer_msg(idev, msgs++); - if (ret) - return ret; - } + if (idev->msg_err) + return idev->msg_err;

return num; }