From: Claudiu Beznea claudiu.beznea@microchip.com
[ Upstream commit b0ecf1c6c6e82da4847900fad0272abfd014666d ]
clk_hw_round_rate() may call round rate function of its parents. In case of SAM9X60 two of USB parrents are PLLA and UPLL. These clocks are controlled by clk-sam9x60-pll.c driver. The round rate function for this driver is sam9x60_pll_round_rate() which call in turn sam9x60_pll_get_best_div_mul(). In case the requested rate is not in the proper range (rate < characteristics->output[0].min && rate > characteristics->output[0].max) the sam9x60_pll_round_rate() will return a negative number to its caller (called by clk_core_round_rate_nolock()). clk_hw_round_rate() will return zero in case a negative number is returned by clk_core_round_rate_nolock(). With this, the USB clock will continue its rate computation even caller of clk_hw_round_rate() returned an error. With this, the USB clock on SAM9X60 may not chose the best parent. I detected this after a suspend/resume cycle on SAM9X60.
Signed-off-by: Claudiu Beznea claudiu.beznea@microchip.com Link: https://lkml.kernel.org/r/1579261009-4573-2-git-send-email-claudiu.beznea@mi... Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/at91/clk-usb.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c index 791770a563fcc..6fac6383d024e 100644 --- a/drivers/clk/at91/clk-usb.c +++ b/drivers/clk/at91/clk-usb.c @@ -78,6 +78,9 @@ static int at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw, tmp_parent_rate = req->rate * div; tmp_parent_rate = clk_hw_round_rate(parent, tmp_parent_rate); + if (!tmp_parent_rate) + continue; + tmp_rate = DIV_ROUND_CLOSEST(tmp_parent_rate, div); if (tmp_rate < req->rate) tmp_diff = req->rate - tmp_rate;
From: Dmitry Osipenko digetx@gmail.com
[ Upstream commit 583b53ece0b0268c542a1eafadb62e3d4b0aab8c ]
The driver fails to probe with -EPROBE_DEFER if battery's power supply (charger driver) isn't ready yet and this results in a bit noisy error message in KMSG during kernel's boot up. Let's silence the harmless error message.
Signed-off-by: Dmitry Osipenko digetx@gmail.com Reviewed-by: Andrew F. Davis afd@ti.com Reviewed-by: Pali Rohár pali@kernel.org Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/power/supply/bq27xxx_battery.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c index 51f0961ecf3e0..a7d8cadf172cb 100644 --- a/drivers/power/supply/bq27xxx_battery.c +++ b/drivers/power/supply/bq27xxx_battery.c @@ -1842,7 +1842,10 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
di->bat = power_supply_register_no_ws(di->dev, psy_desc, &psy_cfg); if (IS_ERR(di->bat)) { - dev_err(di->dev, "failed to register battery\n"); + if (PTR_ERR(di->bat) == -EPROBE_DEFER) + dev_dbg(di->dev, "failed to register battery, deferring probe\n"); + else + dev_err(di->dev, "failed to register battery\n"); return PTR_ERR(di->bat); }
From: Sowjanya Komatineni skomatineni@nvidia.com
[ Upstream commit 6fe38aa8cac3a5db38154331742835a4d9740788 ]
Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3 supported parents are osc, osc_div2, osc_div4 and extern clock.
Clock driver is using incorrect parents clk_m, clk_m_div2, clk_m_div4 for PMC clocks.
This patch fixes this.
Tested-by: Dmitry Osipenko digetx@gmail.com Reviewed-by: Dmitry Osipenko digetx@gmail.com Signed-off-by: Sowjanya Komatineni skomatineni@nvidia.com Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/tegra/clk-tegra-pmc.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/tegra/clk-tegra-pmc.c b/drivers/clk/tegra/clk-tegra-pmc.c index a35579a3f884f..476dab494c44d 100644 --- a/drivers/clk/tegra/clk-tegra-pmc.c +++ b/drivers/clk/tegra/clk-tegra-pmc.c @@ -60,16 +60,16 @@ struct pmc_clk_init_data {
static DEFINE_SPINLOCK(clk_out_lock);
-static const char *clk_out1_parents[] = { "clk_m", "clk_m_div2", - "clk_m_div4", "extern1", +static const char *clk_out1_parents[] = { "osc", "osc_div2", + "osc_div4", "extern1", };
-static const char *clk_out2_parents[] = { "clk_m", "clk_m_div2", - "clk_m_div4", "extern2", +static const char *clk_out2_parents[] = { "osc", "osc_div2", + "osc_div4", "extern2", };
-static const char *clk_out3_parents[] = { "clk_m", "clk_m_div2", - "clk_m_div4", "extern3", +static const char *clk_out3_parents[] = { "osc", "osc_div2", + "osc_div4", "extern3", };
static struct pmc_clk_init_data pmc_clks[] = {
From: Lucas Stach l.stach@pengutronix.de
[ Upstream commit e0ea2d11f8a08ba7066ff897e16c5217215d1e68 ]
Currently we wait only until the PGC inverts the isolation setting before disabling the peripheral clocks. This doesn't ensure that the reset is properly propagated through the peripheral devices in the power domain.
Wait until the PGC signals that the power up request is done and wait a bit for resets to propagate before disabling the clocks.
Signed-off-by: Lucas Stach l.stach@pengutronix.de Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/imx/gpc.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c index 3a12123de4662..0e083fe8b893f 100644 --- a/drivers/soc/imx/gpc.c +++ b/drivers/soc/imx/gpc.c @@ -97,8 +97,8 @@ static int imx6_pm_domain_power_off(struct generic_pm_domain *genpd) static int imx6_pm_domain_power_on(struct generic_pm_domain *genpd) { struct imx_pm_domain *pd = to_imx_pm_domain(genpd); - int i, ret, sw, sw2iso; - u32 val; + int i, ret; + u32 val, req;
if (pd->supply) { ret = regulator_enable(pd->supply); @@ -117,17 +117,18 @@ static int imx6_pm_domain_power_on(struct generic_pm_domain *genpd) regmap_update_bits(pd->regmap, pd->reg_offs + GPC_PGC_CTRL_OFFS, 0x1, 0x1);
- /* Read ISO and ISO2SW power up delays */ - regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val); - sw = val & 0x3f; - sw2iso = (val >> 8) & 0x3f; - /* Request GPC to power up domain */ - val = BIT(pd->cntr_pdn_bit + 1); - regmap_update_bits(pd->regmap, GPC_CNTR, val, val); + req = BIT(pd->cntr_pdn_bit + 1); + regmap_update_bits(pd->regmap, GPC_CNTR, req, req);
- /* Wait ISO + ISO2SW IPG clock cycles */ - udelay(DIV_ROUND_UP(sw + sw2iso, pd->ipg_rate_mhz)); + /* Wait for the PGC to handle the request */ + ret = regmap_read_poll_timeout(pd->regmap, GPC_CNTR, val, !(val & req), + 1, 50); + if (ret) + pr_err("powerup request on domain %s timed out\n", genpd->name); + + /* Wait for reset to propagate through peripherals */ + usleep_range(5, 10);
/* Disable reset clocks for all devices in the domain */ for (i = 0; i < pd->num_clks; i++) @@ -329,6 +330,7 @@ static const struct regmap_config imx_gpc_regmap_config = { .rd_table = &access_table, .wr_table = &access_table, .max_register = 0x2ac, + .fast_io = true, };
static struct generic_pm_domain *imx_gpc_onecell_domains[] = {
From: Alexandre Belloni alexandre.belloni@bootlin.com
[ Upstream commit 9cf4789e6e4673d0b2c96fa6bb0c35e81b43111a ]
The RTC IRQ is requested before the struct rtc_device is allocated, this may lead to a NULL pointer dereference in the IRQ handler.
To fix this issue, allocating the rtc_device struct before requesting the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device to register the RTC device.
Also remove the unnecessary error message as the core already prints the info.
Link: https://lore.kernel.org/r/20200311223956.51352-1-alexandre.belloni@bootlin.c... Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/rtc/rtc-88pm860x.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/rtc/rtc-88pm860x.c b/drivers/rtc/rtc-88pm860x.c index 7d3e5168fcefc..efbbde7379f13 100644 --- a/drivers/rtc/rtc-88pm860x.c +++ b/drivers/rtc/rtc-88pm860x.c @@ -341,6 +341,10 @@ static int pm860x_rtc_probe(struct platform_device *pdev) info->dev = &pdev->dev; dev_set_drvdata(&pdev->dev, info);
+ info->rtc_dev = devm_rtc_allocate_device(&pdev->dev); + if (IS_ERR(info->rtc_dev)) + return PTR_ERR(info->rtc_dev); + ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL, rtc_update_handler, IRQF_ONESHOT, "rtc", info); @@ -382,13 +386,11 @@ static int pm860x_rtc_probe(struct platform_device *pdev) } }
- info->rtc_dev = devm_rtc_device_register(&pdev->dev, "88pm860x-rtc", - &pm860x_rtc_ops, THIS_MODULE); - ret = PTR_ERR(info->rtc_dev); - if (IS_ERR(info->rtc_dev)) { - dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret); + info->rtc_dev->ops = &pm860x_rtc_ops; + + ret = rtc_register_device(info->rtc_dev); + if (ret) return ret; - }
/* * enable internal XO instead of internal 3.25MHz clock since it can
From: Trond Myklebust trond.myklebust@hammerspace.com
[ Upstream commit d911c57a19551c6bef116a3b55c6b089901aacb0 ]
Make sure to test the stateid for validity so that we catch instances where the server may have been reusing stateids in nfs_layout_find_inode_by_stateid().
Fixes: 7b410d9ce460 ("pNFS: Delay getting the layout header in CB_LAYOUTRECALL handlers") Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/callback_proc.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c index b8d55da2f04d5..440ff8e7082b6 100644 --- a/fs/nfs/callback_proc.c +++ b/fs/nfs/callback_proc.c @@ -127,6 +127,8 @@ static struct inode *nfs_layout_find_inode_by_stateid(struct nfs_client *clp, restart: list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) { list_for_each_entry(lo, &server->layouts, plh_layouts) { + if (!pnfs_layout_is_valid(lo)) + continue; if (stateid != NULL && !nfs4_stateid_match_other(stateid, &lo->plh_stateid)) continue;
From: Misono Tomohiro misono.tomohiro@jp.fujitsu.com
[ Upstream commit 8605cf0e852af3b2c771c18417499dc4ceed03d5 ]
When dreq is allocated by nfs_direct_req_alloc(), dreq->kref is initialized to 2. Therefore we need to call nfs_direct_req_release() twice to release the allocated dreq. Usually it is called in nfs_file_direct_{read, write}() and nfs_direct_complete().
However, current code only calls nfs_direct_req_relese() once if nfs_get_lock_context() fails in nfs_file_direct_{read, write}(). So, that case would result in memory leak.
Fix this by adding the missing call.
Signed-off-by: Misono Tomohiro misono.tomohiro@jp.fujitsu.com Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/direct.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 9d07b53e1647b..e6ea4511c41ce 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -600,6 +600,7 @@ ssize_t nfs_file_direct_read(struct kiocb *iocb, struct iov_iter *iter) l_ctx = nfs_get_lock_context(dreq->ctx); if (IS_ERR(l_ctx)) { result = PTR_ERR(l_ctx); + nfs_direct_req_release(dreq); goto out_release; } dreq->l_ctx = l_ctx; @@ -1023,6 +1024,7 @@ ssize_t nfs_file_direct_write(struct kiocb *iocb, struct iov_iter *iter) l_ctx = nfs_get_lock_context(dreq->ctx); if (IS_ERR(l_ctx)) { result = PTR_ERR(l_ctx); + nfs_direct_req_release(dreq); goto out_release; } dreq->l_ctx = l_ctx;
From: Alexander Gordeev agordeev@linux.ibm.com
[ Upstream commit 872f27103874a73783aeff2aac2b41a489f67d7c ]
/proc/cpuinfo should not print information about CPU 0 when it is offline.
Fixes: 281eaa8cb67c ("s390/cpuinfo: simplify locking and skip offline cpus early") Signed-off-by: Alexander Gordeev agordeev@linux.ibm.com Reviewed-by: Heiko Carstens heiko.carstens@de.ibm.com [heiko.carstens@de.ibm.com: shortened commit message] Signed-off-by: Heiko Carstens heiko.carstens@de.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/kernel/processor.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c index 6fe2e1875058b..675d4be0c2b77 100644 --- a/arch/s390/kernel/processor.c +++ b/arch/s390/kernel/processor.c @@ -157,8 +157,9 @@ static void show_cpu_mhz(struct seq_file *m, unsigned long n) static int show_cpuinfo(struct seq_file *m, void *v) { unsigned long n = (unsigned long) v - 1; + unsigned long first = cpumask_first(cpu_online_mask);
- if (!n) + if (n == first) show_cpu_summary(m, v); if (!machine_has_cpu_mhz) return 0; @@ -171,6 +172,8 @@ static inline void *c_update(loff_t *pos) { if (*pos) *pos = cpumask_next(*pos - 1, cpu_online_mask); + else + *pos = cpumask_first(cpu_online_mask); return *pos < nr_cpu_ids ? (void *)*pos + 1 : NULL; }
From: Josef Bacik josef@toxicpanda.com
[ Upstream commit 4cdfd93002cb84471ed85b4999cd38077a317873 ]
We want to use this for dropping all roots, and in some error cases we may not have a root, so handle this to make the cleanup code easier. Make btrfs_grab_fs_root the same so we can use it in cases where the root may not exist (like the quota root).
Reviewed-by: Nikolay Borisov nborisov@suse.com Signed-off-by: Josef Bacik josef@toxicpanda.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/disk-io.h | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/fs/btrfs/disk-io.h b/fs/btrfs/disk-io.h index 7f7c35d6347a3..4066220a980b2 100644 --- a/fs/btrfs/disk-io.h +++ b/fs/btrfs/disk-io.h @@ -109,6 +109,8 @@ struct btrfs_root *btrfs_alloc_dummy_root(struct btrfs_fs_info *fs_info); */ static inline struct btrfs_root *btrfs_grab_fs_root(struct btrfs_root *root) { + if (!root) + return NULL; if (refcount_inc_not_zero(&root->refs)) return root; return NULL; @@ -116,6 +118,8 @@ static inline struct btrfs_root *btrfs_grab_fs_root(struct btrfs_root *root)
static inline void btrfs_put_fs_root(struct btrfs_root *root) { + if (!root) + return; if (refcount_dec_and_test(&root->refs)) kfree(root); }
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit af6cf95c4d003fccd6c2ecc99a598fb854b537e7 ]
When building ppc64 defconfig, Clang errors (trimmed for brevity):
arch/powerpc/platforms/maple/setup.c:365:1: error: attribute declaration must precede definition [-Werror,-Wignored-attributes] machine_device_initcall(maple, maple_cpc925_edac_setup); ^
machine_device_initcall expands to __define_machine_initcall, which in turn has the macro machine_is used in it, which declares mach_##name with an __attribute__((weak)). define_machine actually defines mach_##name, which in this file happens before the declaration, hence the warning.
To fix this, move define_machine after machine_device_initcall so that the declaration occurs before the definition, which matches how machine_device_initcall and define_machine work throughout arch/powerpc.
While we're here, remove some spaces before tabs.
Fixes: 8f101a051ef0 ("edac: cpc925 MC platform device setup") Reported-by: Nick Desaulniers ndesaulniers@google.com Suggested-by: Ilie Halip ilie.halip@gmail.com Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20200323222729.15365-1-natechancellor@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/platforms/maple/setup.c | 34 ++++++++++++++-------------- 1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index b7f937563827d..d1fee2d35b49c 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -299,23 +299,6 @@ static int __init maple_probe(void) return 1; }
-define_machine(maple) { - .name = "Maple", - .probe = maple_probe, - .setup_arch = maple_setup_arch, - .init_IRQ = maple_init_IRQ, - .pci_irq_fixup = maple_pci_irq_fixup, - .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq, - .restart = maple_restart, - .halt = maple_halt, - .get_boot_time = maple_get_boot_time, - .set_rtc_time = maple_set_rtc_time, - .get_rtc_time = maple_get_rtc_time, - .calibrate_decr = generic_calibrate_decr, - .progress = maple_progress, - .power_save = power4_idle, -}; - #ifdef CONFIG_EDAC /* * Register a platform device for CPC925 memory controller on @@ -372,3 +355,20 @@ static int __init maple_cpc925_edac_setup(void) } machine_device_initcall(maple, maple_cpc925_edac_setup); #endif + +define_machine(maple) { + .name = "Maple", + .probe = maple_probe, + .setup_arch = maple_setup_arch, + .init_IRQ = maple_init_IRQ, + .pci_irq_fixup = maple_pci_irq_fixup, + .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq, + .restart = maple_restart, + .halt = maple_halt, + .get_boot_time = maple_get_boot_time, + .set_rtc_time = maple_set_rtc_time, + .get_rtc_time = maple_get_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .progress = maple_progress, + .power_save = power4_idle, +};
From: Eric Sandeen sandeen@redhat.com
[ Upstream commit c96e2b8564adfb8ac14469ebc51ddc1bfecb3ae2 ]
Under some circumstances we may encounter a filesystem error on a read-only block device, and if we try to save the error info to the superblock and commit it, we'll wind up with a noisy error and backtrace, i.e.:
[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode # ------------[ cut here ]------------ generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2) WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0 ...
To avoid this, commit the error info in the superblock only if the block device is writable.
Reported-by: Ritesh Harjani riteshh@linux.ibm.com Signed-off-by: Eric Sandeen sandeen@redhat.com Reviewed-by: Andreas Dilger adilger@dilger.ca Link: https://lore.kernel.org/r/4b6e774d-cc00-3469-7abb-108eb151071a@sandeen.net Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/super.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/ext4/super.c b/fs/ext4/super.c index f5646bcad7702..af55757bad699 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -369,7 +369,8 @@ static void save_error_info(struct super_block *sb, const char *func, unsigned int line) { __save_error_info(sb, func, line); - ext4_commit_super(sb, 1); + if (!bdev_read_only(sb->s_bdev)) + ext4_commit_super(sb, 1); }
/*
From: Josh Triplett josh@joshtriplett.org
[ Upstream commit df41460a21b06a76437af040d90ccee03888e8e5 ]
ext4_fill_super doublechecks the number of groups before mounting; if that check fails, the resulting error message prints the group count from the ext4_sb_info sbi, which hasn't been set yet. Print the freshly computed group count instead (which at that point has just been computed in "blocks_count").
Signed-off-by: Josh Triplett josh@joshtriplett.org Fixes: 4ec1102813798 ("ext4: Add sanity checks for the superblock before mounting the filesystem") Link: https://lore.kernel.org/r/8b957cd1513fcc4550fe675c10bcce2175c33a49.158543196... Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/super.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/ext4/super.c b/fs/ext4/super.c index af55757bad699..47cbd51111739 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -4101,9 +4101,9 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) EXT4_BLOCKS_PER_GROUP(sb) - 1); do_div(blocks_count, EXT4_BLOCKS_PER_GROUP(sb)); if (blocks_count > ((uint64_t)1<<32) - EXT4_DESC_PER_BLOCK(sb)) { - ext4_msg(sb, KERN_WARNING, "groups count too large: %u " + ext4_msg(sb, KERN_WARNING, "groups count too large: %llu " "(block count %llu, first data block %u, " - "blocks per group %lu)", sbi->s_groups_count, + "blocks per group %lu)", blocks_count, ext4_blocks_count(es), le32_to_cpu(es->s_first_data_block), EXT4_BLOCKS_PER_GROUP(sb));
From: Josh Triplett josh@joshtriplett.org
[ Upstream commit b9c538da4e52a7b79dfcf4cfa487c46125066dfb ]
If ext4_fill_super detects an invalid number of inodes per group, the resulting error message printed the number of blocks per group, rather than the number of inodes per group. Fix it to print the correct value.
Fixes: cd6bb35bf7f6d ("ext4: use more strict checks for inodes_per_block on mount") Link: https://lore.kernel.org/r/8be03355983a08e5d4eed480944613454d7e2550.158543464... Reviewed-by: Andreas Dilger adilger@dilger.ca Signed-off-by: Josh Triplett josh@joshtriplett.org Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 47cbd51111739..96696015e4ef3 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3970,7 +3970,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) if (sbi->s_inodes_per_group < sbi->s_inodes_per_block || sbi->s_inodes_per_group > blocksize * 8) { ext4_msg(sb, KERN_ERR, "invalid inodes per group: %lu\n", - sbi->s_blocks_per_group); + sbi->s_inodes_per_group); goto failed_mount; } sbi->s_itb_per_group = sbi->s_inodes_per_group /
From: Richard Palethorpe rpalethorpe@suse.com
[ Upstream commit b9258a2cece4ec1f020715fe3554bc2e360f6264 ]
struct can_frame contains some padding which is not explicitly zeroed in slc_bump. This uninitialized data will then be transmitted if the stack initialization hardening feature is not enabled (CONFIG_INIT_STACK_ALL).
This commit just zeroes the whole struct including the padding.
Signed-off-by: Richard Palethorpe rpalethorpe@suse.com Fixes: a1044e36e457 ("can: add slcan driver for serial/USB-serial CAN adapters") Reviewed-by: Kees Cook keescook@chromium.org Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Cc: security@kernel.org Cc: wg@grandegger.com Cc: mkl@pengutronix.de Cc: davem@davemloft.net Acked-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/slcan.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index 7c37b96ff22a7..c5a616395c490 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -147,7 +147,7 @@ static void slc_bump(struct slcan *sl) u32 tmpid; char *cmd = sl->rbuff;
- cf.can_id = 0; + memset(&cf, 0, sizeof(cf));
switch (*cmd) { case 'r': @@ -186,8 +186,6 @@ static void slc_bump(struct slcan *sl) else return;
- *(u64 *) (&cf.data) = 0; /* clear payload */ - /* RTR frames may have a dlc > 0 but they never have any data bytes */ if (!(cf.can_id & CAN_RTR_FLAG)) { for (i = 0; i < cf.can_dlc; i++) {
From: Jisheng Zhang Jisheng.Zhang@synaptics.com
[ Upstream commit 3e1221acf6a8f8595b5ce354bab4327a69d54d18 ]
Commit 9463c4455900 ("net: stmmac: dwmac1000: Clear unused address entries") cleared the unused mac address entries, but introduced an out-of bounds mac address register programming bug -- After setting the secondary unicast mac addresses, the "reg" value has reached netdev_uc_count() + 1, thus we should only clear address entries if (addr < perfect_addr_number)
Fixes: 9463c4455900 ("net: stmmac: dwmac1000: Clear unused address entries") Signed-off-by: Jisheng Zhang Jisheng.Zhang@synaptics.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c index 08dd6a06ac58d..f76d4a7281af0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c @@ -218,7 +218,7 @@ static void dwmac1000_set_filter(struct mac_device_info *hw, reg++; }
- while (reg <= perfect_addr_number) { + while (reg < perfect_addr_number) { writel(0, ioaddr + GMAC_ADDR_HIGH(reg)); writel(0, ioaddr + GMAC_ADDR_LOW(reg)); reg++;
From: Steven Price steven.price@arm.com
[ Upstream commit 3f3673d7d324d872d9d8ddb73b3e5e47fbf12e0d ]
If CONFIG_DEVICE_PRIVATE is defined, but neither CONFIG_MEMORY_FAILURE nor CONFIG_MIGRATION, then non_swap_entry() will return 0, meaning that the condition (non_swap_entry(entry) && is_device_private_entry(entry)) in zap_pte_range() will never be true even if the entry is a device private one.
Equally any other code depending on non_swap_entry() will not function as expected.
I originally spotted this just by looking at the code, I haven't actually observed any problems.
Looking a bit more closely it appears that actually this situation (currently at least) cannot occur:
DEVICE_PRIVATE depends on ZONE_DEVICE ZONE_DEVICE depends on MEMORY_HOTREMOVE MEMORY_HOTREMOVE depends on MIGRATION
Fixes: 5042db43cc26 ("mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory") Signed-off-by: Steven Price steven.price@arm.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Cc: Jérôme Glisse jglisse@redhat.com Cc: Arnd Bergmann arnd@arndb.de Cc: Dan Williams dan.j.williams@intel.com Cc: John Hubbard jhubbard@nvidia.com Link: http://lkml.kernel.org/r/20200305130550.22693-1-steven.price@arm.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/swapops.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/linux/swapops.h b/include/linux/swapops.h index 1d3877c39a000..0b8c860967527 100644 --- a/include/linux/swapops.h +++ b/include/linux/swapops.h @@ -377,7 +377,8 @@ static inline void num_poisoned_pages_inc(void) } #endif
-#if defined(CONFIG_MEMORY_FAILURE) || defined(CONFIG_MIGRATION) +#if defined(CONFIG_MEMORY_FAILURE) || defined(CONFIG_MIGRATION) || \ + defined(CONFIG_DEVICE_PRIVATE) static inline int non_swap_entry(swp_entry_t entry) { return swp_type(entry) >= MAX_SWAPFILES;
From: Qian Cai cai@lca.pw
[ Upstream commit 7e2345200262e4a6056580f0231cccdaffc825f3 ]
"vm_committed_as.count" could be accessed concurrently as reported by KCSAN,
BUG: KCSAN: data-race in __vm_enough_memory / percpu_counter_add_batch
write to 0xffffffff9451c538 of 8 bytes by task 65879 on cpu 35: percpu_counter_add_batch+0x83/0xd0 percpu_counter_add_batch at lib/percpu_counter.c:91 __vm_enough_memory+0xb9/0x260 dup_mm+0x3a4/0x8f0 copy_process+0x2458/0x3240 _do_fork+0xaa/0x9f0 __do_sys_clone+0x125/0x160 __x64_sys_clone+0x70/0x90 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe
read to 0xffffffff9451c538 of 8 bytes by task 66773 on cpu 19: __vm_enough_memory+0x199/0x260 percpu_counter_read_positive at include/linux/percpu_counter.h:81 (inlined by) __vm_enough_memory at mm/util.c:839 mmap_region+0x1b2/0xa10 do_mmap+0x45c/0x700 vm_mmap_pgoff+0xc0/0x130 ksys_mmap_pgoff+0x6e/0x300 __x64_sys_mmap+0x33/0x40 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe
The read is outside percpu_counter::lock critical section which results in a data race. Fix it by adding a READ_ONCE() in percpu_counter_read_positive() which could also service as the existing compiler memory barrier.
Signed-off-by: Qian Cai cai@lca.pw Signed-off-by: Andrew Morton akpm@linux-foundation.org Acked-by: Marco Elver elver@google.com Link: http://lkml.kernel.org/r/1582302724-2804-1-git-send-email-cai@lca.pw Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/percpu_counter.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/percpu_counter.h b/include/linux/percpu_counter.h index 73a7bf30fe9a3..3f3cece31148d 100644 --- a/include/linux/percpu_counter.h +++ b/include/linux/percpu_counter.h @@ -78,9 +78,9 @@ static inline s64 percpu_counter_read(struct percpu_counter *fbc) */ static inline s64 percpu_counter_read_positive(struct percpu_counter *fbc) { - s64 ret = fbc->count; + /* Prevent reloads of fbc->count */ + s64 ret = READ_ONCE(fbc->count);
- barrier(); /* Prevent reloads of fbc->count */ if (ret >= 0) return ret; return 0;
From: Vegard Nossum vegard.nossum@oracle.com
[ Upstream commit af9c5d2e3b355854ff0e4acfbfbfadcd5198a349 ]
compiletime_assert() uses __LINE__ to create a unique function name. This means that if you have more than one BUILD_BUG_ON() in the same source line (which can happen if they appear e.g. in a macro), then the error message from the compiler might output the wrong condition.
For this source file:
#include <linux/build_bug.h>
#define macro() \ BUILD_BUG_ON(1); \ BUILD_BUG_ON(0);
void foo() { macro(); }
gcc would output:
./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_9' declared with attribute error: BUILD_BUG_ON failed: 0 _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
However, it was not the BUILD_BUG_ON(0) that failed, so it should say 1 instead of 0. With this patch, we use __COUNTER__ instead of __LINE__, so each BUILD_BUG_ON() gets a different function name and the correct condition is printed:
./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_0' declared with attribute error: BUILD_BUG_ON failed: 1 _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
Signed-off-by: Vegard Nossum vegard.nossum@oracle.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Reviewed-by: Masahiro Yamada yamada.masahiro@socionext.com Reviewed-by: Daniel Santos daniel.santos@pobox.com Cc: Rasmus Villemoes linux@rasmusvillemoes.dk Cc: Ian Abbott abbotti@mev.co.uk Cc: Joe Perches joe@perches.com Link: http://lkml.kernel.org/r/20200331112637.25047-1-vegard.nossum@oracle.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/compiler.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/compiler.h b/include/linux/compiler.h index f84d332085c31..3ffe3f3f79035 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -331,7 +331,7 @@ unsigned long read_word_at_a_time(const void *addr) * compiler has support to do so. */ #define compiletime_assert(condition, msg) \ - _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__) + _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
#define compiletime_assert_atomic_type(t) \ compiletime_assert(__native_word(t), \
From: David Hildenbrand david@redhat.com
[ Upstream commit 1493e0f944f3c319d11e067c185c904d01c17ae5 ]
We have to properly retry again by returning -EINVAL immediately in case somebody else instantiated the table concurrently. We missed to add the goto in this function only. The code now matches the other, similar shadowing functions.
We are overwriting an existing region 2 table entry. All allocated pages are added to the crst_list to be freed later, so they are not lost forever. However, when unshadowing the region 2 table, we wouldn't trigger unshadowing of the original shadowed region 3 table that we replaced. It would get unshadowed when the original region 3 table is modified. As it's not connected to the page table hierarchy anymore, it's not going to get used anymore. However, for a limited time, this page table will stick around, so it's in some sense a temporary memory leak.
Identified by manual code inspection. I don't think this classifies as stable material.
Fixes: 998f637cc4b9 ("s390/mm: avoid races on region/segment/page table shadowing") Signed-off-by: David Hildenbrand david@redhat.com Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.com Reviewed-by: Claudio Imbrenda imbrenda@linux.ibm.com Reviewed-by: Christian Borntraeger borntraeger@de.ibm.com Signed-off-by: Christian Borntraeger borntraeger@de.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/mm/gmap.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c index ec9292917d3f2..3efe99f760063 100644 --- a/arch/s390/mm/gmap.c +++ b/arch/s390/mm/gmap.c @@ -1683,6 +1683,7 @@ int gmap_shadow_r3t(struct gmap *sg, unsigned long saddr, unsigned long r3t, goto out_free; } else if (*table & _REGION_ENTRY_ORIGIN) { rc = -EAGAIN; /* Race with shadow */ + goto out_free; } crst_table_init(s_r3t, _REGION3_ENTRY_EMPTY); /* mark as invalid as long as the parent table is not protected */
From: Florian Fainelli f.fainelli@gmail.com
[ Upstream commit afa3b592953bfaecfb4f2f335ec5f935cff56804 ]
When the bcm_sf2 was converted into a proper platform device driver and used the new dsa_register_switch() interface, we would still be parsing the legacy DSA node that contained all the port information since the platform firmware has intentionally maintained backward and forward compatibility to client programs. Ensure that we do parse the correct node, which is "ports" per the revised DSA binding.
Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by: Florian Fainelli f.fainelli@gmail.com Reviewed-by: Vivien Didelot vivien.didelot@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/bcm_sf2.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 6bca42e34a53d..b40ebc27e1ece 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -1112,6 +1112,7 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev) const struct bcm_sf2_of_data *data; struct b53_platform_data *pdata; struct dsa_switch_ops *ops; + struct device_node *ports; struct bcm_sf2_priv *priv; struct b53_device *dev; struct dsa_switch *ds; @@ -1174,7 +1175,11 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev) */ set_bit(0, priv->cfp.used);
- bcm_sf2_identify_ports(priv, dn->child); + ports = of_find_node_by_name(dn, "ports"); + if (ports) { + bcm_sf2_identify_ports(priv, ports); + of_node_put(ports); + }
priv->irq0 = irq_of_parse_and_map(dn, 0); priv->irq1 = irq_of_parse_and_map(dn, 1);
From: Qian Cai cai@lca.pw
[ Upstream commit 696ac2e3bf267f5a2b2ed7d34e64131f2287d0ad ]
Similar to commit 0266d81e9bf5 ("acpi/processor: Prevent cpu hotplug deadlock") except this is for acpi_processor_ffh_cstate_probe():
"The problem is that the work is scheduled on the current CPU from the hotplug thread associated with that CPU.
It's not required to invoke these functions via the workqueue because the hotplug thread runs on the target CPU already.
Check whether current is a per cpu thread pinned on the target CPU and invoke the function directly to avoid the workqueue."
WARNING: possible circular locking dependency detected ------------------------------------------------------ cpuhp/1/15 is trying to acquire lock: ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630
but task is already holding lock: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x3e/0xc0 irq_calc_affinity_vectors+0x5f/0x91 __pci_enable_msix_range+0x10f/0x9a0 pci_alloc_irq_vectors_affinity+0x13e/0x1f0 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208 pqi_ctrl_init+0x72f/0x1618 [smartpqi] pqi_pci_probe.cold.63+0x882/0x892 [smartpqi] local_pci_probe+0x7a/0xc0 work_for_cpu_fn+0x2e/0x50 process_one_work+0x57e/0xb90 worker_thread+0x363/0x5b0 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50
-> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}: __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50
other info that might help us debug this:
Chain exists of: (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock
Possible unsafe locking scenario:
CPU0 CPU1 ---- ---- lock(cpuidle_lock); lock(cpuhp_state-up); lock(cpuidle_lock); lock((work_completion)(&wfc.work));
*** DEADLOCK ***
3 locks held by cpuhp/1/15: #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20
Call Trace: dump_stack+0xa0/0xea print_circular_bug.cold.52+0x147/0x14c check_noncircular+0x295/0x2d0 __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50
Signed-off-by: Qian Cai cai@lca.pw Tested-by: Borislav Petkov bp@suse.de [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/acpi/cstate.c | 3 ++- drivers/acpi/processor_throttling.c | 7 ------- include/acpi/processor.h | 8 ++++++++ 3 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c index dde437f5d14ff..596e7640d895a 100644 --- a/arch/x86/kernel/acpi/cstate.c +++ b/arch/x86/kernel/acpi/cstate.c @@ -133,7 +133,8 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
/* Make sure we are running on right CPU */
- retval = work_on_cpu(cpu, acpi_processor_ffh_cstate_probe_cpu, cx); + retval = call_on_cpu(cpu, acpi_processor_ffh_cstate_probe_cpu, cx, + false); if (retval == 0) { /* Use the hint in CST */ percpu_entry->states[cx->index].eax = cx->address; diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 7f9aff4b8d627..9fdc13a2f2d59 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -909,13 +909,6 @@ static long __acpi_processor_get_throttling(void *data) return pr->throttling.acpi_processor_get_throttling(pr); }
-static int call_on_cpu(int cpu, long (*fn)(void *), void *arg, bool direct) -{ - if (direct || (is_percpu_thread() && cpu == smp_processor_id())) - return fn(arg); - return work_on_cpu(cpu, fn, arg); -} - static int acpi_processor_get_throttling(struct acpi_processor *pr) { if (!pr) diff --git a/include/acpi/processor.h b/include/acpi/processor.h index d591bb77f592b..f4bff23135479 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -291,6 +291,14 @@ static inline void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx } #endif
+static inline int call_on_cpu(int cpu, long (*fn)(void *), void *arg, + bool direct) +{ + if (direct || (is_percpu_thread() && cpu == smp_processor_id())) + return fn(arg); + return work_on_cpu(cpu, fn, arg); +} + /* in processor_perflib.c */
#ifdef CONFIG_CPU_FREQ
From: Oleksij Rempel o.rempel@pengutronix.de
[ Upstream commit 6110dff776f7fa65c35850ef65b41d3b39e2fac2 ]
After the power-down bit is cleared, the chip internally triggers a global reset. According to the KSZ9031 documentation, we have to wait at least 1ms for the reset to finish.
If the chip is accessed during reset, read will return 0xffff, while write will be ignored. Depending on the system performance and MDIO bus speed, we may or may not run in to this issue.
This bug was discovered on an iMX6QP system with KSZ9031 PHY and attached PHY interrupt line. If IRQ was used, the link status update was lost. In polling mode, the link status update was always correct.
The investigation showed, that during a read-modify-write access, the read returned 0xffff (while the chip was still in reset) and corresponding write hit the chip _after_ reset and triggered (due to the 0xffff) another reset in an undocumented bit (register 0x1f, bit 1), resulting in the next write being lost due to the new reset cycle.
This patch fixes the issue by adding a 1...2 ms sleep after the genphy_resume().
Fixes: 836384d2501d ("net: phy: micrel: Add specific suspend") Signed-off-by: Oleksij Rempel o.rempel@pengutronix.de Reviewed-by: Andrew Lunn andrew@lunn.ch Reviewed-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/micrel.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index eb85cf4a381a4..5be7fc354e338 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -29,6 +29,7 @@ #include <linux/micrel_phy.h> #include <linux/of.h> #include <linux/clk.h> +#include <linux/delay.h>
/* Operation Mode Strap Override */ #define MII_KSZPHY_OMSO 0x16 @@ -727,6 +728,12 @@ static int kszphy_resume(struct phy_device *phydev)
genphy_resume(phydev);
+ /* After switching from power-down to normal mode, an internal global + * reset is automatically generated. Wait a minimum of 1 ms before + * read/write access to the PHY registers. + */ + usleep_range(1000, 2000); + ret = kszphy_config_reset(phydev); if (ret) return ret;
From: Jack Zhang Jack.Zhang1@amd.com
[ Upstream commit 3148a6a0ef3cf93570f30a477292768f7eb5d3c3 ]
Originally, it kfrees the wrong pointer for mem_obj. It would cause memory leak under stress test.
Signed-off-by: Jack Zhang Jack.Zhang1@amd.com Acked-by: Nirmoy Das nirmoy.das@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c index 61fff25b4ce7d..ecd4eba221c0a 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c @@ -550,9 +550,9 @@ int kfd_gtt_sa_allocate(struct kfd_dev *kfd, unsigned int size, return 0;
kfd_gtt_no_free_chunk: - pr_debug("Allocation failed with mem_obj = %p\n", mem_obj); + pr_debug("Allocation failed with mem_obj = %p\n", *mem_obj); mutex_unlock(&kfd->gtt_sa_lock); - kfree(mem_obj); + kfree(*mem_obj); return -ENOMEM; }
From: Trond Myklebust trond.myklebust@hammerspace.com
[ Upstream commit 862f35c94730c9270833f3ad05bd758a29f204ed ]
If we just set the mirror count to 1 without first clearing out the mirrors, we can leak queued up requests.
Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/pagelist.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c index ceb6892d9bbdc..7c01936be7c70 100644 --- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -864,15 +864,6 @@ static void nfs_pageio_setup_mirroring(struct nfs_pageio_descriptor *pgio, pgio->pg_mirror_count = mirror_count; }
-/* - * nfs_pageio_stop_mirroring - stop using mirroring (set mirror count to 1) - */ -void nfs_pageio_stop_mirroring(struct nfs_pageio_descriptor *pgio) -{ - pgio->pg_mirror_count = 1; - pgio->pg_mirror_idx = 0; -} - static void nfs_pageio_cleanup_mirroring(struct nfs_pageio_descriptor *pgio) { pgio->pg_mirror_count = 1; @@ -1301,6 +1292,14 @@ void nfs_pageio_cond_complete(struct nfs_pageio_descriptor *desc, pgoff_t index) } }
+/* + * nfs_pageio_stop_mirroring - stop using mirroring (set mirror count to 1) + */ +void nfs_pageio_stop_mirroring(struct nfs_pageio_descriptor *pgio) +{ + nfs_pageio_complete(pgio); +} + int __init nfs_init_nfspagecache(void) { nfs_page_cachep = kmem_cache_create("nfs_page",
From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit fb945c95a482200876993977008b67ea658bd938 ]
While the commit 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints") tries to harden the sanity checks it made at the same time a regression, i.e. mixed in and out endpoints. Obviously it should have been not tested on real hardware at that time, but unluckily it didn't happen.
So, fix above mentioned typo and make device being enumerated again.
While here, introduce an enumerator for magic values to prevent similar issue to happen in the future.
Fixes: 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints") Cc: Oliver Neukum oneukum@suse.com Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/dln2.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c index 95d0f2df0ad42..672831d5ee32e 100644 --- a/drivers/mfd/dln2.c +++ b/drivers/mfd/dln2.c @@ -93,6 +93,11 @@ struct dln2_mod_rx_slots { spinlock_t lock; };
+enum dln2_endpoint { + DLN2_EP_OUT = 0, + DLN2_EP_IN = 1, +}; + struct dln2_dev { struct usb_device *usb_dev; struct usb_interface *interface; @@ -740,10 +745,10 @@ static int dln2_probe(struct usb_interface *interface, hostif->desc.bNumEndpoints < 2) return -ENODEV;
- epin = &hostif->endpoint[0].desc; - epout = &hostif->endpoint[1].desc; + epout = &hostif->endpoint[DLN2_EP_OUT].desc; if (!usb_endpoint_is_bulk_out(epout)) return -ENODEV; + epin = &hostif->endpoint[DLN2_EP_IN].desc; if (!usb_endpoint_is_bulk_in(epin)) return -ENODEV;
From: Jacob Pan jacob.jun.pan@linux.intel.com
[ Upstream commit 902baf61adf6b187f0a6b789e70d788ea71ff5bc ]
Move canonical address check before mmget_not_zero() to avoid mm reference leak.
Fixes: 9d8c3af31607 ("iommu/vt-d: IOMMU Page Request needs to check if address is canonical.") Signed-off-by: Jacob Pan jacob.jun.pan@linux.intel.com Acked-by: Lu Baolu baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/intel-svm.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/intel-svm.c b/drivers/iommu/intel-svm.c index f5573bb9f450e..837459762eb39 100644 --- a/drivers/iommu/intel-svm.c +++ b/drivers/iommu/intel-svm.c @@ -613,14 +613,15 @@ static irqreturn_t prq_event_thread(int irq, void *d) * any faults on kernel addresses. */ if (!svm->mm) goto bad_req; - /* If the mm is already defunct, don't handle faults. */ - if (!mmget_not_zero(svm->mm)) - goto bad_req;
/* If address is not canonical, return invalid response */ if (!is_canonical_address(address)) goto bad_req;
+ /* If the mm is already defunct, don't handle faults. */ + if (!mmget_not_zero(svm->mm)) + goto bad_req; + down_read(&svm->mm->mmap_sem); vma = find_extend_vma(svm->mm, address); if (!vma || address < vma->vm_start)
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit 44a52022e7f15cbaab957df1c14f7a4f527ef7cf ]
When EXT2_ATTR_DEBUG is not defined, modify the 2 debug macros to use the no_printk() macro instead of <nothing>. This fixes gcc warnings when -Wextra is used:
../fs/ext2/xattr.c:252:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../fs/ext2/xattr.c:258:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../fs/ext2/xattr.c:330:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../fs/ext2/xattr.c:872:45: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
I have verified that the only object code change (with gcc 7.5.0) is the reversal of some instructions from 'cmp a,b' to 'cmp b,a'.
Link: https://lore.kernel.org/r/e18a7395-61fb-2093-18e8-ed4f8cf56248@infradead.org Signed-off-by: Randy Dunlap rdunlap@infradead.org Cc: Jan Kara jack@suse.com Cc: linux-ext4@vger.kernel.org Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext2/xattr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/fs/ext2/xattr.c b/fs/ext2/xattr.c index dd8f10db82e99..4439bfaf1c57f 100644 --- a/fs/ext2/xattr.c +++ b/fs/ext2/xattr.c @@ -56,6 +56,7 @@
#include <linux/buffer_head.h> #include <linux/init.h> +#include <linux/printk.h> #include <linux/slab.h> #include <linux/mbcache.h> #include <linux/quotaops.h> @@ -84,8 +85,8 @@ printk("\n"); \ } while (0) #else -# define ea_idebug(f...) -# define ea_bdebug(f...) +# define ea_idebug(inode, f...) no_printk(f) +# define ea_bdebug(bh, f...) no_printk(f) #endif
static int ext2_xattr_set2(struct inode *, struct buffer_head *,
From: Jan Kara jack@suse.cz
[ Upstream commit 32302085a8d90859c40cf1a5e8313f575d06ec75 ]
Fix a debug-only build error in ext2/xattr.c:
When building without extra debugging, (and with another patch that uses no_printk() instead of <empty> for the ext2-xattr debug-print macros, this build error happens:
../fs/ext2/xattr.c: In function ‘ext2_xattr_cache_insert’: ../fs/ext2/xattr.c:869:18: error: ‘ext2_xattr_cache’ undeclared (first use in this function); did you mean ‘ext2_xattr_list’? atomic_read(&ext2_xattr_cache->c_entry_count));
Fix the problem by removing cached entry count from the debug message since otherwise we'd have to export the mbcache structure just for that.
Fixes: be0726d33cb8 ("ext2: convert to mbcache2") Reported-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext2/xattr.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/fs/ext2/xattr.c b/fs/ext2/xattr.c index 4439bfaf1c57f..bd1d68ff3a9f8 100644 --- a/fs/ext2/xattr.c +++ b/fs/ext2/xattr.c @@ -839,8 +839,7 @@ ext2_xattr_cache_insert(struct mb_cache *cache, struct buffer_head *bh) error = mb_cache_entry_create(cache, GFP_NOFS, hash, bh->b_blocknr, 1); if (error) { if (error == -EBUSY) { - ea_bdebug(bh, "already in cache (%d cache entries)", - atomic_read(&ext2_xattr_cache->c_entry_count)); + ea_bdebug(bh, "already in cache"); error = 0; } } else
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit f84afbdd3a9e5e10633695677b95422572f920dc ]
The "cmd" comes from the user and it can be up to 255. It it's more than the number of bits in long, it results out of bounds read when we check test_bit(cmd, &cmd_mask). The highest valid value for "cmd" is ND_CMD_CALL (10) so I added a compare against that.
Fixes: 62232e45f4a2 ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Link: https://lore.kernel.org/r/20200225162055.amtosfy7m35aivxg@kili.mountain Signed-off-by: Dan Williams dan.j.williams@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvdimm/bus.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/nvdimm/bus.c b/drivers/nvdimm/bus.c index 2f1b54fab399f..83e18b367944c 100644 --- a/drivers/nvdimm/bus.c +++ b/drivers/nvdimm/bus.c @@ -951,8 +951,10 @@ static int __nd_ioctl(struct nvdimm_bus *nvdimm_bus, struct nvdimm *nvdimm, return -EFAULT; }
- if (!desc || (desc->out_num + desc->in_num == 0) || - !test_bit(cmd, &cmd_mask)) + if (!desc || + (desc->out_num + desc->in_num == 0) || + cmd > ND_CMD_CALL || + !test_bit(cmd, &cmd_mask)) return -ENOTTY;
/* fail write commands (when read-only) */
From: Adrian Huang ahuang12@lenovo.com
[ Upstream commit c20f36534666e37858a14e591114d93cc1be0d34 ]
The SPA of the GCR3 table root pointer[51:31] masks 20 bits. However, this requires 21 bits (Please see the AMD IOMMU specification). This leads to the potential failure when the bit 51 of SPA of the GCR3 table root pointer is 1'.
Signed-off-by: Adrian Huang ahuang12@lenovo.com Fixes: 52815b75682e2 ("iommu/amd: Add support for IOMMUv2 domain mode") Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/amd_iommu_types.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h index 3054c0971759f..74c8638aac2b9 100644 --- a/drivers/iommu/amd_iommu_types.h +++ b/drivers/iommu/amd_iommu_types.h @@ -348,7 +348,7 @@
#define DTE_GCR3_VAL_A(x) (((x) >> 12) & 0x00007ULL) #define DTE_GCR3_VAL_B(x) (((x) >> 15) & 0x0ffffULL) -#define DTE_GCR3_VAL_C(x) (((x) >> 31) & 0xfffffULL) +#define DTE_GCR3_VAL_C(x) (((x) >> 31) & 0x1fffffULL)
#define DTE_GCR3_INDEX_A 0 #define DTE_GCR3_INDEX_B 1
linux-stable-mirror@lists.linaro.org
-
Sasha Levin