In serial_omap_rs485() RS485 support may be deactivated due to a missing RTS GPIO. This is done by nullifying the ports rs485_supported struct. After that however the serial_omap_rs485_supported struct is assigned to the same structure unconditionally, which results in an unintended reactivation of RS485 support. Fix this by callling serial_omap_rs485() after the assignment of rs485_supported.

Fixes: e2752ae3cfc9 ("serial: omap: Disallow RS-485 if rts-gpio is not specified") Cc: stable@vger.kernel.org Signed-off-by: Lino Sanfilippo l.sanfilippo@kunbus.com --- drivers/tty/serial/omap-serial.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index ad4c1c5d0a7f..d9b2936308c4 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1604,10 +1604,6 @@ static int serial_omap_probe(struct platform_device *pdev) dev_info(up->port.dev, "no wakeirq for uart%d\n", up->port.line);

- ret = serial_omap_probe_rs485(up, &pdev->dev); - if (ret < 0) - goto err_rs485; - sprintf(up->name, "OMAP UART%d", up->port.line); up->port.mapbase = mem->start; up->port.membase = base; @@ -1622,6 +1618,10 @@ static int serial_omap_probe(struct platform_device *pdev) DEFAULT_CLK_SPEED); }

+ ret = serial_omap_probe_rs485(up, &pdev->dev); + if (ret < 0) + goto err_rs485; + up->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; up->calc_latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; cpu_latency_qos_add_request(&up->pm_qos_request, up->latency);