From: Zhang Qilong zhangqilong3@huawei.com

[ Upstream commit 7d4e966f4cd73ff69bf06934e8e14a33fb7ef447 ]

This reverts commit 86b46bf1feb83898d89a2b4a8d08d21e9ea277a7.

The pm_runtime_disable is redundant when error returns in wm5110_probe, we just revert the old patch to fix it.

Signed-off-by: Zhang Qilong zhangqilong3@huawei.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20221010114852.88127-3-zhangqilong3@huawei.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm5110.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index bbe9fdfb423c..06ec3f48c808 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -2452,6 +2452,9 @@ static int wm5110_probe(struct platform_device *pdev) regmap_update_bits(arizona->regmap, wm5110_digital_vu[i], WM5110_DIG_VU, WM5110_DIG_VU);

+ pm_runtime_enable(&pdev->dev); + pm_runtime_idle(&pdev->dev); + ret = arizona_request_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, "ADSP2 Compressed IRQ", wm5110_adsp2_irq, wm5110); @@ -2484,9 +2487,6 @@ static int wm5110_probe(struct platform_device *pdev) goto err_spk_irqs; }

- pm_runtime_enable(&pdev->dev); - pm_runtime_idle(&pdev->dev); - return ret;

err_spk_irqs:

From: Xiaolei Wang xiaolei.wang@windriver.com

[ Upstream commit ee1aa2ae3eaa96e70229fa61deee87ef4528ffdf ]

In wm8962 driver, the WM8962_ADDITIONAL_CONTROL_4 is used as a volatile register, but this register mixes a bunch of volatile status bits and a bunch of non-volatile control bits. The dapm widgets TEMP_HP and TEMP_SPK leverages the control bits in this register. After the wm8962 probe, the regmap will bet set to cache only mode, then a read error like below would be triggered when trying to read the initial power state of the dapm widgets TEMP_HP and TEMP_SPK. wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16

In order to fix this issue, we add event handler to actually power up/down these widgets. With this change, we also need to explicitly power off these widgets in the wm8962 probe since they are enabled by default.

Signed-off-by: Xiaolei Wang xiaolei.wang@windriver.com Tested-by: Adam Ford aford173@gmail.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20221010092014.2229246-1-xiaolei.wang@windriver.co... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm8962.c | 54 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 52 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index ebaee468057b..c384ca3681e9 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -1840,6 +1840,49 @@ SOC_SINGLE_TLV("SPKOUTR Mixer DACR Volume", WM8962_SPEAKER_MIXER_5, 4, 1, 0, inmix_tlv), };

+static int tp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + int ret, reg, val, mask; + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + + ret = pm_runtime_resume_and_get(component->dev); + if (ret < 0) { + dev_err(component->dev, "Failed to resume device: %d\n", ret); + return ret; + } + + reg = WM8962_ADDITIONAL_CONTROL_4; + + if (!strcmp(w->name, "TEMP_HP")) { + mask = WM8962_TEMP_ENA_HP_MASK; + val = WM8962_TEMP_ENA_HP; + } else if (!strcmp(w->name, "TEMP_SPK")) { + mask = WM8962_TEMP_ENA_SPK_MASK; + val = WM8962_TEMP_ENA_SPK; + } else { + pm_runtime_put(component->dev); + return -EINVAL; + } + + switch (event) { + case SND_SOC_DAPM_POST_PMD: + val = 0; + fallthrough; + case SND_SOC_DAPM_POST_PMU: + ret = snd_soc_component_update_bits(component, reg, mask, val); + break; + default: + WARN(1, "Invalid event %d\n", event); + pm_runtime_put(component->dev); + return -EINVAL; + } + + pm_runtime_put(component->dev); + + return 0; +} + static int cp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -2132,8 +2175,10 @@ SND_SOC_DAPM_SUPPLY("TOCLK", WM8962_ADDITIONAL_CONTROL_1, 0, 0, NULL, 0), SND_SOC_DAPM_SUPPLY_S("DSP2", 1, WM8962_DSP2_POWER_MANAGEMENT, WM8962_DSP2_ENA_SHIFT, 0, dsp2_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), -SND_SOC_DAPM_SUPPLY("TEMP_HP", WM8962_ADDITIONAL_CONTROL_4, 2, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY("TEMP_SPK", WM8962_ADDITIONAL_CONTROL_4, 1, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("TEMP_HP", SND_SOC_NOPM, 0, 0, tp_event, + SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD), +SND_SOC_DAPM_SUPPLY("TEMP_SPK", SND_SOC_NOPM, 0, 0, tp_event, + SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),

SND_SOC_DAPM_MIXER("INPGAL", WM8962_LEFT_INPUT_PGA_CONTROL, 4, 0, inpgal, ARRAY_SIZE(inpgal)), @@ -3750,6 +3795,11 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, if (ret < 0) goto err_pm_runtime;

+ regmap_update_bits(wm8962->regmap, WM8962_ADDITIONAL_CONTROL_4, + WM8962_TEMP_ENA_HP_MASK, 0); + regmap_update_bits(wm8962->regmap, WM8962_ADDITIONAL_CONTROL_4, + WM8962_TEMP_ENA_SPK_MASK, 0); + regcache_cache_only(wm8962->regmap, true);

/* The drivers should power up as needed */

From: Siarhei Volkau lis8215@gmail.com

[ Upstream commit 1013999b431b4bcdc1f5ae47dd3338122751db31 ]

Line In path stayed powered off during capturing or bypass to mixer.

Signed-off-by: Siarhei Volkau lis8215@gmail.com Link: https://lore.kernel.org/r/20221016132648.3011729-2-lis8215@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/jz4725b.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/jz4725b.c b/sound/soc/codecs/jz4725b.c index 2567a5d15b55..a04b8d5d1ded 100644 --- a/sound/soc/codecs/jz4725b.c +++ b/sound/soc/codecs/jz4725b.c @@ -236,7 +236,8 @@ static const struct snd_soc_dapm_widget jz4725b_codec_dapm_widgets[] = { SND_SOC_DAPM_MIXER("DAC to Mixer", JZ4725B_CODEC_REG_CR1, REG_CR1_DACSEL_OFFSET, 0, NULL, 0),

- SND_SOC_DAPM_MIXER("Line In", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Line In", JZ4725B_CODEC_REG_PMR1, + REG_PMR1_SB_LIN_OFFSET, 1, NULL, 0), SND_SOC_DAPM_MIXER("HP Out", JZ4725B_CODEC_REG_CR1, REG_CR1_HP_DIS_OFFSET, 1, NULL, 0),

From: Siarhei Volkau lis8215@gmail.com

[ Upstream commit 1538e2c8c9b7e7a656effcc6e4e7cfe8c1b405fd ]

Line In Bypass control is used as Master Capture at the moment this is completely incorrect.

Current control routed to Mixer instead of ADC, thus can't affect Capture path. ADC control shall be used instead.

ADC volume control parameters are different, so the patch fixes that as well. Manual says (16.6.3.2 Programmable input attenuation amplifier: PGATM) that gain varies in range 0dB..22.5dB with 1.5dB step.

Signed-off-by: Siarhei Volkau lis8215@gmail.com Link: https://lore.kernel.org/r/20221016132648.3011729-4-lis8215@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/jz4725b.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/jz4725b.c b/sound/soc/codecs/jz4725b.c index 1f7a234266b9..1960516ac65e 100644 --- a/sound/soc/codecs/jz4725b.c +++ b/sound/soc/codecs/jz4725b.c @@ -136,13 +136,16 @@ enum { #define REG_CGR3_GO1L_OFFSET 0 #define REG_CGR3_GO1L_MASK (0x1f << REG_CGR3_GO1L_OFFSET)

+#define REG_CGR10_GIL_OFFSET 0 +#define REG_CGR10_GIR_OFFSET 4 + struct jz_icdc { struct regmap *regmap; void __iomem *base; struct clk *clk; };

-static const SNDRV_CTL_TLVD_DECLARE_DB_LINEAR(jz4725b_line_tlv, -1500, 600); +static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(jz4725b_adc_tlv, 0, 150, 0); static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(jz4725b_dac_tlv, -2250, 150, 0);

static const struct snd_kcontrol_new jz4725b_codec_controls[] = { @@ -151,11 +154,11 @@ static const struct snd_kcontrol_new jz4725b_codec_controls[] = { REG_CGR1_GODL_OFFSET, REG_CGR1_GODR_OFFSET, 0xf, 1, jz4725b_dac_tlv), - SOC_DOUBLE_R_TLV("Master Capture Volume", - JZ4725B_CODEC_REG_CGR3, - JZ4725B_CODEC_REG_CGR2, - REG_CGR2_GO1R_OFFSET, - 0x1f, 1, jz4725b_line_tlv), + SOC_DOUBLE_TLV("Master Capture Volume", + JZ4725B_CODEC_REG_CGR10, + REG_CGR10_GIL_OFFSET, + REG_CGR10_GIR_OFFSET, + 0xf, 0, jz4725b_adc_tlv),

SOC_SINGLE("Master Playback Switch", JZ4725B_CODEC_REG_CR1, REG_CR1_DAC_MUTE_OFFSET, 1, 1),

From: Ricardo Cañuelo ricardo.canuelo@collabora.com

[ Upstream commit beb7d862ed4ac6aa14625418970f22a7d55b8615 ]

Handle the scenario where the build is launched with the ARCH envvar defined as x86_64.

Signed-off-by: Ricardo Cañuelo ricardo.canuelo@collabora.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/intel_pstate/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/intel_pstate/Makefile b/tools/testing/selftests/intel_pstate/Makefile index 7340fd6a9a9f..9fc1a40b0127 100644 --- a/tools/testing/selftests/intel_pstate/Makefile +++ b/tools/testing/selftests/intel_pstate/Makefile @@ -2,10 +2,10 @@ CFLAGS := $(CFLAGS) -Wall -D_GNU_SOURCE LDLIBS := $(LDLIBS) -lm

-uname_M := $(shell uname -m 2>/dev/null || echo not) -ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/) +ARCH ?= $(shell uname -m 2>/dev/null || echo not) +ARCH_PROCESSED := $(shell echo $(ARCH) | sed -e s/i.86/x86/ -e s/x86_64/x86/)

-ifeq (x86,$(ARCH)) +ifeq (x86,$(ARCH_PROCESSED)) TEST_GEN_FILES := msr aperf endif