From: Pavel Andrianov andrianov@ispras.ru
[ Upstream commit 0571a753cb07982cc82f4a5115e0b321da89e1f3 ]
pxa168_eth_remove() firstly calls unregister_netdev(), then cancels a timeout work. unregister_netdev() shuts down a device interface and removes it from the kernel tables. If the timeout occurs in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop and open of the device. It may lead to an inconsistent state and memory leaks.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Pavel Andrianov andrianov@ispras.ru Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/marvell/pxa168_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index 7ace07dad6a3..9986f88618bd 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -1577,8 +1577,8 @@ static int pxa168_eth_remove(struct platform_device *pdev)
mdiobus_unregister(pep->smi_bus); mdiobus_free(pep->smi_bus); - unregister_netdev(dev); cancel_work_sync(&pep->tx_timeout_task); + unregister_netdev(dev); free_netdev(dev); return 0; }
From: Tong Zhang ztong0001@gmail.com
[ Upstream commit a9f81244d2e33e6dfcef120fefd30c96b3f7cdb0 ]
setup_fritz() in avmfritz.c might fail with -EIO and in this case the isac.type and isac.write_reg is not initialized and remains 0(NULL). A subsequent call to isac_release() will dereference isac->write_reg and crash.
[ 1.737444] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.737809] #PF: supervisor instruction fetch in kernel mode [ 1.738106] #PF: error_code(0x0010) - not-present page [ 1.738378] PGD 0 P4D 0 [ 1.738515] Oops: 0010 [#1] SMP NOPTI [ 1.738711] CPU: 0 PID: 180 Comm: systemd-udevd Not tainted 5.12.0-rc2+ #78 [ 1.739077] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-p rebuilt.qemu.org 04/01/2014 [ 1.739664] RIP: 0010:0x0 [ 1.739807] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 1.740200] RSP: 0018:ffffc9000027ba10 EFLAGS: 00010202 [ 1.740478] RAX: 0000000000000000 RBX: ffff888102f41840 RCX: 0000000000000027 [ 1.740853] RDX: 00000000000000ff RSI: 0000000000000020 RDI: ffff888102f41800 [ 1.741226] RBP: ffffc9000027ba20 R08: ffff88817bc18440 R09: ffffc9000027b808 [ 1.741600] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888102f41840 [ 1.741976] R13: 00000000fffffffb R14: ffff888102f41800 R15: ffff8881008b0000 [ 1.742351] FS: 00007fda3a38a8c0(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 1.742774] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.743076] CR2: ffffffffffffffd6 CR3: 00000001021ec000 CR4: 00000000000006f0 [ 1.743452] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.743828] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1.744206] Call Trace: [ 1.744339] isac_release+0xcc/0xe0 [mISDNipac] [ 1.744582] fritzpci_probe.cold+0x282/0x739 [avmfritz] [ 1.744861] local_pci_probe+0x48/0x80 [ 1.745063] pci_device_probe+0x10f/0x1c0 [ 1.745278] really_probe+0xfb/0x420 [ 1.745471] driver_probe_device+0xe9/0x160 [ 1.745693] device_driver_attach+0x5d/0x70 [ 1.745917] __driver_attach+0x8f/0x150 [ 1.746123] ? device_driver_attach+0x70/0x70 [ 1.746354] bus_for_each_dev+0x7e/0xc0 [ 1.746560] driver_attach+0x1e/0x20 [ 1.746751] bus_add_driver+0x152/0x1f0 [ 1.746957] driver_register+0x74/0xd0 [ 1.747157] ? 0xffffffffc00d8000 [ 1.747334] __pci_register_driver+0x54/0x60 [ 1.747562] AVM_init+0x36/0x1000 [avmfritz] [ 1.747791] do_one_initcall+0x48/0x1d0 [ 1.747997] ? __cond_resched+0x19/0x30 [ 1.748206] ? kmem_cache_alloc_trace+0x390/0x440 [ 1.748458] ? do_init_module+0x28/0x250 [ 1.748669] do_init_module+0x62/0x250 [ 1.748870] load_module+0x23ee/0x26a0 [ 1.749073] __do_sys_finit_module+0xc2/0x120 [ 1.749307] ? __do_sys_finit_module+0xc2/0x120 [ 1.749549] __x64_sys_finit_module+0x1a/0x20 [ 1.749782] do_syscall_64+0x38/0x90
Signed-off-by: Tong Zhang ztong0001@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/isdn/hardware/mISDN/mISDNipac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c index cb428b9ee441..b4639b0aab3c 100644 --- a/drivers/isdn/hardware/mISDN/mISDNipac.c +++ b/drivers/isdn/hardware/mISDN/mISDNipac.c @@ -709,7 +709,7 @@ isac_release(struct isac_hw *isac) { if (isac->type & IPAC_TYPE_ISACX) WriteISAC(isac, ISACX_MASK, 0xff); - else + else if (isac->type != 0) WriteISAC(isac, ISAC_MASK, 0xff); if (isac->dch.timer.function != NULL) { del_timer(&isac->dch.timer);
From: Markus Theil markus.theil@tu-ilmenau.de
[ Upstream commit 3bd801b14e0c5d29eeddc7336558beb3344efaa3 ]
Clear beacon ie pointer and ie length after free in order to prevent double free.
================================================================== BUG: KASAN: double-free or invalid-free \ in ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876
CPU: 0 PID: 8472 Comm: syz-executor100 Not tainted 5.11.0-rc6-syzkaller #0 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x5b/0x2c6 mm/kasan/report.c:230 kasan_report_invalid_free+0x51/0x80 mm/kasan/report.c:355 ____kasan_slab_free+0xcc/0xe0 mm/kasan/common.c:341 kasan_slab_free include/linux/kasan.h:192 [inline] __cache_free mm/slab.c:3424 [inline] kfree+0xed/0x270 mm/slab.c:3760 ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876 rdev_leave_ibss net/wireless/rdev-ops.h:545 [inline] __cfg80211_leave_ibss+0x19a/0x4c0 net/wireless/ibss.c:212 __cfg80211_leave+0x327/0x430 net/wireless/core.c:1172 cfg80211_leave net/wireless/core.c:1221 [inline] cfg80211_netdev_notifier_call+0x9e8/0x12c0 net/wireless/core.c:1335 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2040 call_netdevice_notifiers_extack net/core/dev.c:2052 [inline] call_netdevice_notifiers net/core/dev.c:2066 [inline] __dev_close_many+0xee/0x2e0 net/core/dev.c:1586 __dev_close net/core/dev.c:1624 [inline] __dev_change_flags+0x2cb/0x730 net/core/dev.c:8476 dev_change_flags+0x8a/0x160 net/core/dev.c:8549 dev_ifsioc+0x210/0xa70 net/core/dev_ioctl.c:265 dev_ioctl+0x1b1/0xc40 net/core/dev_ioctl.c:511 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060 sock_ioctl+0x477/0x6a0 net/socket.c:1177 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: syzbot+93976391bf299d425f44@syzkaller.appspotmail.com Signed-off-by: Markus Theil markus.theil@tu-ilmenau.de Link: https://lore.kernel.org/r/20210213133653.367130-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/ibss.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index f2af19673b26..50fa92fe7d24 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -1860,6 +1860,8 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata)
/* remove beacon */ kfree(sdata->u.ibss.ie); + sdata->u.ibss.ie = NULL; + sdata->u.ibss.ie_len = 0;
/* on the next join, re-program HT parameters */ memset(&ifibss->ht_capa, 0, sizeof(ifibss->ht_capa));
From: Karthikeyan Kathirvel kathirve@codeaurora.org
[ Upstream commit 041c881a0ba8a75f71118bd9766b78f04beed469 ]
Even if the first channel from sband channel list is invalid or disabled mac80211 ends up choosing it as the default channel for monitor interfaces, making them not usable.
Fix this by assigning the first available valid or enabled channel instead.
Signed-off-by: Karthikeyan Kathirvel kathirve@codeaurora.org Link: https://lore.kernel.org/r/1615440547-7661-1-git-send-email-kathirve@codeauro... [reword commit message, comment, code cleanups] Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/main.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 15d23aeea634..2357b17254e7 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -889,8 +889,19 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) continue;
if (!dflt_chandef.chan) { + /* + * Assign the first enabled channel to dflt_chandef + * from the list of channels + */ + for (i = 0; i < sband->n_channels; i++) + if (!(sband->channels[i].flags & + IEEE80211_CHAN_DISABLED)) + break; + /* if none found then use the first anyway */ + if (i == sband->n_channels) + i = 0; cfg80211_chandef_create(&dflt_chandef, - &sband->channels[0], + &sband->channels[i], NL80211_CHAN_NO_HT); /* init channel we're on */ if (!local->use_chanctx && !local->_oper_chandef.chan) {
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit 9fcb51c14da2953de585c5c6e50697b8a6e91a7b ]
The new Ubuntu GCC packages turn on -fcf-protection globally, which causes a build failure in the x86 realmode code:
cc1: error: ‘-fcf-protection’ is not compatible with this target
Turn it off explicitly on compilers that understand this option.
Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Ingo Molnar mingo@kernel.org Link: https://lore.kernel.org/r/20210323124846.1584944-1-arnd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 5fece9334f12..2b3adb3008c3 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -34,7 +34,7 @@ REALMODE_CFLAGS := $(M16_CFLAGS) -g -Os -D__KERNEL__ \ -DDISABLE_BRANCH_PROFILING \ -Wall -Wstrict-prototypes -march=i386 -mregparm=3 \ -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ - -mno-mmx -mno-sse + -mno-mmx -mno-sse $(call cc-option,-fcf-protection=none)
REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -ffreestanding) REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -fno-stack-protector)
From: Sergei Trofimovich slyfox@gentoo.org
[ Upstream commit f2a419cf495f95cac49ea289318b833477e1a0e2 ]
The sleep warning happens at early boot right at secondary CPU activation bootup:
smp: Bringing up secondary CPUs ... BUG: sleeping function called from invalid context at mm/page_alloc.c:4942 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.12.0-rc2-00007-g79e228d0b611-dirty #99 .. Call Trace: show_stack+0x90/0xc0 dump_stack+0x150/0x1c0 ___might_sleep+0x1c0/0x2a0 __might_sleep+0xa0/0x160 __alloc_pages_nodemask+0x1a0/0x600 alloc_page_interleave+0x30/0x1c0 alloc_pages_current+0x2c0/0x340 __get_free_pages+0x30/0xa0 ia64_mca_cpu_init+0x2d0/0x3a0 cpu_init+0x8b0/0x1440 start_secondary+0x60/0x700 start_ap+0x750/0x780 Fixed BSP b0 value from CPU 1
As I understand interrupts are not enabled yet and system has a lot of memory. There is little chance to sleep and switch to GFP_ATOMIC should be a no-op.
Link: https://lkml.kernel.org/r/20210315085045.204414-1-slyfox@gentoo.org Signed-off-by: Sergei Trofimovich slyfox@gentoo.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/ia64/kernel/mca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 2889412e03eb..0d5b64ddcdd1 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -1858,7 +1858,7 @@ ia64_mca_cpu_init(void *cpu_data) data = mca_bootmem(); first_time = 0; } else - data = (void *)__get_free_pages(GFP_KERNEL, + data = (void *)__get_free_pages(GFP_ATOMIC, get_order(sz)); if (!data) panic("Could not allocate MCA memory for cpu %d\n",
From: Ronnie Sahlberg lsahlber@redhat.com
[ Upstream commit cee8f4f6fcabfdf229542926128e9874d19016d5 ]
RHBZ: 1933527
Under SMB1 + POSIX, if an inode is reused on a server after we have read and cached a part of a file, when we then open the new file with the re-cycled inode there is a chance that we may serve the old data out of cache to the application. This only happens for SMB1 (deprecated) and when posix are used. The simplest solution to avoid this race is to force a revalidate on smb1-posix open.
Signed-off-by: Ronnie Sahlberg lsahlber@redhat.com Reviewed-by: Paulo Alcantara (SUSE) pc@cjr.nz Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/file.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/fs/cifs/file.c b/fs/cifs/file.c index b5a05092f862..5bc617cb7721 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -163,6 +163,7 @@ int cifs_posix_open(char *full_path, struct inode **pinode, goto posix_open_ret; } } else { + cifs_revalidate_mapping(*pinode); cifs_fattr_to_inode(*pinode, &fattr); }
From: Vincent Whitchurch vincent.whitchurch@axis.com
[ Upstream commit 219481a8f90ec3a5eed9638fb35609e4b1aeece7 ]
Make SMB2 not print out an error when an oplock break is received for an unknown handle, similar to SMB1. The debug message which is printed for these unknown handles may also be misleading, so fix that too.
The SMB2 lease break path is not affected by this patch.
Without this, a program which writes to a file from one thread, and opens, reads, and writes the same file from another thread triggers the below errors several times a minute when run against a Samba server configured with "smb2 leases = no".
CIFS: VFS: \192.168.0.1 No task to wake, unknown frame received! NumMids 2 00000000: 424d53fe 00000040 00000000 00000012 .SMB@........... 00000010: 00000001 00000000 ffffffff ffffffff ................ 00000020: 00000000 00000000 00000000 00000000 ................ 00000030: 00000000 00000000 00000000 00000000 ................
Signed-off-by: Vincent Whitchurch vincent.whitchurch@axis.com Reviewed-by: Tom Talpey tom@talpey.com Reviewed-by: Paulo Alcantara (SUSE) pc@cjr.nz Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/smb2misc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c index 44198b9a5315..19baeb4ca511 100644 --- a/fs/cifs/smb2misc.c +++ b/fs/cifs/smb2misc.c @@ -633,8 +633,8 @@ smb2_is_valid_oplock_break(char *buffer, struct TCP_Server_Info *server) } } spin_unlock(&cifs_tcp_ses_lock); - cifs_dbg(FYI, "Can not process oplock break for non-existent connection\n"); - return false; + cifs_dbg(FYI, "No file id matched, oplock break ignored\n"); + return true; }
void
linux-stable-mirror@lists.linaro.org
-
Sasha Levin