[PATCH AUTOSEL 4.19 1/9] ASoC: wm8994: Skip setting of the WM8994_MICBIAS register for WM1811
From: Sylwester Nawrocki s.nawrocki@samsung.com
[ Upstream commit 811c5494436789e7149487c06e0602b507ce274b ]
The WM8994_MICBIAS register is not available in the WM1811 CODEC so skip initialization of that register for that device. This suppresses an error during boot: "wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec"
Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com Acked-by: Krzysztof Kozlowski krzk@kernel.org Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20200827173357.31891-1-s.nawrocki@samsung.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm8994.c | 2 ++ sound/soc/codecs/wm_hubs.c | 3 +++ sound/soc/codecs/wm_hubs.h | 1 + 3 files changed, 6 insertions(+)
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 01acb8da2f48e..cd089b4143029 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -4051,11 +4051,13 @@ static int wm8994_component_probe(struct snd_soc_component *component) wm8994->hubs.dcs_readback_mode = 2; break; } + wm8994->hubs.micd_scthr = true; break;
case WM8958: wm8994->hubs.dcs_readback_mode = 1; wm8994->hubs.hp_startup_mode = 1; + wm8994->hubs.micd_scthr = true;
switch (control->revision) { case 0: diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index fed6ea9b019f7..da7fa6f5459e6 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -1227,6 +1227,9 @@ int wm_hubs_handle_analogue_pdata(struct snd_soc_component *component, snd_soc_component_update_bits(component, WM8993_ADDITIONAL_CONTROL, WM8993_LINEOUT2_FB, WM8993_LINEOUT2_FB);
+ if (!hubs->micd_scthr) + return 0; + snd_soc_component_update_bits(component, WM8993_MICBIAS, WM8993_JD_SCTHR_MASK | WM8993_JD_THR_MASK | WM8993_MICB1_LVL | WM8993_MICB2_LVL, diff --git a/sound/soc/codecs/wm_hubs.h b/sound/soc/codecs/wm_hubs.h index ee339ad8514d1..1433d73e09bf8 100644 --- a/sound/soc/codecs/wm_hubs.h +++ b/sound/soc/codecs/wm_hubs.h @@ -31,6 +31,7 @@ struct wm_hubs_data { int hp_startup_mode; int series_startup; int no_series_update; + bool micd_scthr;
bool no_cache_dac_hp_direct; struct list_head dcs_cache;
From: Sylwester Nawrocki s.nawrocki@samsung.com
[ Upstream commit f5a2cda4f1db89776b64c4f0f2c2ac609527ac70 ]
When the wm8958_mic_detect, wm8994_mic_detect functions get called from the machine driver, e.g. from the card's late_probe() callback, the CODEC device may be PM runtime suspended and any regmap writes have no effect. Add PM runtime calls to these functions to ensure the device registers are updated as expected. This suppresses an error during boot "wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec" caused by the regmap access error due to the cache_only flag being set.
Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com Acked-by: Krzysztof Kozlowski krzk@kernel.org Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20200827173357.31891-2-s.nawrocki@samsung.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm8994.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index cd089b4143029..e3e069277a3ff 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3376,6 +3376,8 @@ int wm8994_mic_detect(struct snd_soc_component *component, struct snd_soc_jack * return -EINVAL; }
+ pm_runtime_get_sync(component->dev); + switch (micbias) { case 1: micdet = &wm8994->micdet[0]; @@ -3423,6 +3425,8 @@ int wm8994_mic_detect(struct snd_soc_component *component, struct snd_soc_jack *
snd_soc_dapm_sync(dapm);
+ pm_runtime_put(component->dev); + return 0; } EXPORT_SYMBOL_GPL(wm8994_mic_detect); @@ -3790,6 +3794,8 @@ int wm8958_mic_detect(struct snd_soc_component *component, struct snd_soc_jack * return -EINVAL; }
+ pm_runtime_get_sync(component->dev); + if (jack) { snd_soc_dapm_force_enable_pin(dapm, "CLK_SYS"); snd_soc_dapm_sync(dapm); @@ -3858,6 +3864,8 @@ int wm8958_mic_detect(struct snd_soc_component *component, struct snd_soc_jack * snd_soc_dapm_sync(dapm); }
+ pm_runtime_put(component->dev); + return 0; } EXPORT_SYMBOL_GPL(wm8958_mic_detect);
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 6a0137101f47301fff2da6ba4b9048383d569909 ]
The MPMAN Converter9 2-in-1 almost fully works with out default settings. The only problem is that it has only 1 speaker so any sounds only playing on the right channel get lost.
Add a quirk for this model using the default settings + MONO_SPEAKER.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200901080623.4987-1-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 0dcd249877c55..ec630127ef2f3 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -588,6 +588,16 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { /* MPMAN Converter 9, similar hw as the I.T.Works TW891 2-in-1 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MPMAN"), + DMI_MATCH(DMI_PRODUCT_NAME, "Converter9"), + }, + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { /* MPMAN MPWIN895CL */ .matches = {
From: Palmer Dabbelt palmerdabbelt@google.com
[ Upstream commit 66d18dbda8469a944dfec6c49d26d5946efba218 ]
Without this we get lockdep failures. They're spurious failures as SMP isn't up when ftrace_init_nop() is called. As far as I can tell the easiest fix is to just take the lock, which also seems like the safest fix.
Signed-off-by: Palmer Dabbelt palmerdabbelt@google.com Acked-by: Guo Ren guoren@kernel.org Signed-off-by: Palmer Dabbelt palmerdabbelt@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/include/asm/ftrace.h | 7 +++++++ arch/riscv/kernel/ftrace.c | 19 +++++++++++++++++++ 2 files changed, 26 insertions(+)
diff --git a/arch/riscv/include/asm/ftrace.h b/arch/riscv/include/asm/ftrace.h index c6dcc5291f972..02fbc175142e2 100644 --- a/arch/riscv/include/asm/ftrace.h +++ b/arch/riscv/include/asm/ftrace.h @@ -63,4 +63,11 @@ do { \ * Let auipc+jalr be the basic *mcount unit*, so we make it 8 bytes here. */ #define MCOUNT_INSN_SIZE 8 + +#ifndef __ASSEMBLY__ +struct dyn_ftrace; +int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec); +#define ftrace_init_nop ftrace_init_nop +#endif + #endif diff --git a/arch/riscv/kernel/ftrace.c b/arch/riscv/kernel/ftrace.c index 6d39f64e4dce4..fa8530f05ed4f 100644 --- a/arch/riscv/kernel/ftrace.c +++ b/arch/riscv/kernel/ftrace.c @@ -88,6 +88,25 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, return __ftrace_modify_call(rec->ip, addr, false); }
+ +/* + * This is called early on, and isn't wrapped by + * ftrace_arch_code_modify_{prepare,post_process}() and therefor doesn't hold + * text_mutex, which triggers a lockdep failure. SMP isn't running so we could + * just directly poke the text, but it's simpler to just take the lock + * ourselves. + */ +int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec) +{ + int out; + + ftrace_arch_code_modify_prepare(); + out = ftrace_make_nop(mod, rec, MCOUNT_ADDR); + ftrace_arch_code_modify_post_process(); + + return out; +} + int ftrace_update_ftrace_func(ftrace_func_t func) { int ret = __ftrace_modify_call((unsigned long)&ftrace_call,
From: Ilya Leoshkevich iii@linux.ibm.com
[ Upstream commit fcb2b70cdb194157678fb1a75f9ff499aeba3d2a ]
Add __init to reserve_memory_end, reserve_oldmem and remove_oldmem. Sometimes these functions are not inlined, and then the build complains about section mismatch.
Signed-off-by: Ilya Leoshkevich iii@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 5f85e0dfa66d1..4bda9055daefa 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -537,7 +537,7 @@ static struct notifier_block kdump_mem_nb = { /* * Make sure that the area behind memory_end is protected */ -static void reserve_memory_end(void) +static void __init reserve_memory_end(void) { #ifdef CONFIG_CRASH_DUMP if (ipl_info.type == IPL_TYPE_FCP_DUMP && @@ -555,7 +555,7 @@ static void reserve_memory_end(void) /* * Make sure that oldmem, where the dump is stored, is protected */ -static void reserve_oldmem(void) +static void __init reserve_oldmem(void) { #ifdef CONFIG_CRASH_DUMP if (OLDMEM_BASE) @@ -567,7 +567,7 @@ static void reserve_oldmem(void) /* * Make sure that oldmem, where the dump is stored, is protected */ -static void remove_oldmem(void) +static void __init remove_oldmem(void) { #ifdef CONFIG_CRASH_DUMP if (OLDMEM_BASE)
From: Sven Schnelle svens@linux.ibm.com
[ Upstream commit 73ac74c7d489756d2313219a108809921dbfaea1 ]
Switch order so that locking state is consistent even if the IRQ tracer calls into lockdep again.
Acked-by: Peter Zijlstra peterz@infradead.org Signed-off-by: Sven Schnelle svens@linux.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/trace_preemptirq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/trace/trace_preemptirq.c b/kernel/trace/trace_preemptirq.c index 71f553cceb3c1..0e373cb0106bb 100644 --- a/kernel/trace/trace_preemptirq.c +++ b/kernel/trace/trace_preemptirq.c @@ -59,14 +59,14 @@ EXPORT_SYMBOL(trace_hardirqs_on_caller);
__visible void trace_hardirqs_off_caller(unsigned long caller_addr) { + lockdep_hardirqs_off(CALLER_ADDR0); + if (!this_cpu_read(tracing_irq_cpu)) { this_cpu_write(tracing_irq_cpu, 1); tracer_hardirqs_off(CALLER_ADDR0, caller_addr); if (!in_nmi()) trace_irq_disable_rcuidle(CALLER_ADDR0, caller_addr); } - - lockdep_hardirqs_off(CALLER_ADDR0); } EXPORT_SYMBOL(trace_hardirqs_off_caller); #endif /* CONFIG_TRACE_IRQFLAGS */
From: Dennis Li Dennis.Li@amd.com
[ Upstream commit 087d764159996ae378b08c0fdd557537adfd6899 ]
In the resume stage of GPU recovery, start_cpsch will call pm_init which set pm->allocated as false, cause the next pm_release_ib has no chance to release ib memory.
Add pm_release_ib in stop_cpsch which will be called in the suspend stage of GPU recovery.
Reviewed-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Dennis Li Dennis.Li@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index 189212cb35475..bff39f561264e 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -1101,6 +1101,8 @@ static int stop_cpsch(struct device_queue_manager *dqm) unmap_queues_cpsch(dqm, KFD_UNMAP_QUEUES_FILTER_ALL_QUEUES, 0); dqm_unlock(dqm);
+ pm_release_ib(&dqm->packets); + kfd_gtt_sa_free(dqm->dev, dqm->fence_mem); pm_uninit(&dqm->packets);
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 21653a4181ff292480599dad996a2b759ccf050f ]
Some ACPI i2c-devices _STA method (which is used to detect if the device is present) use autodetection code which probes which device is present over i2c. This requires the I2C ACPI OpRegion handler to be registered before we enumerate i2c-clients under the i2c-adapter.
This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and ThinkBook 15 IIL not getting an i2c-client instantiated and thus not working.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1842039 Signed-off-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/i2c-core-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index f225bef1e043c..41dd0a08a625c 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -1292,8 +1292,8 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
/* create pre-declared device nodes */ of_i2c_register_devices(adap); - i2c_acpi_register_devices(adap); i2c_acpi_install_space_handler(adap); + i2c_acpi_register_devices(adap);
if (adap->nr < __i2c_first_dynamic_bus_num) i2c_scan_static_board_info(adap);
From: Josh Poimboeuf jpoimboe@redhat.com
[ Upstream commit db6c6a0df840e3f52c84cc302cc1a08ba11a4416 ]
When a function is annotated with STACK_FRAME_NON_STANDARD, objtool doesn't validate its code paths. It also skips sibling call detection within the function.
But sibling call detection is actually needed for the case where the ignored function doesn't have any return instructions. Otherwise objtool naively marks the function as implicit static noreturn, which affects the reachability of its callers, resulting in "unreachable instruction" warnings.
Fix it by just enabling sibling call detection for ignored functions. The 'insn->ignore' check in add_jump_destinations() is no longer needed after
e6da9567959e ("objtool: Don't use ignore flag for fake jumps").
Fixes the following warning:
arch/x86/kvm/vmx/vmx.o: warning: objtool: vmx_handle_exit_irqoff()+0x142: unreachable instruction
which triggers on an allmodconfig with CONFIG_GCOV_KERNEL unset.
Reported-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Josh Poimboeuf jpoimboe@redhat.com Signed-off-by: Borislav Petkov bp@suse.de Acked-by: Linus Torvalds torvalds@linux-foundation.org Link: https://lkml.kernel.org/r/5b1e2536cdbaa5246b60d7791b76130a74082c62.159975146... Signed-off-by: Sasha Levin sashal@kernel.org --- tools/objtool/check.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/objtool/check.c b/tools/objtool/check.c index fd3071d83deae..c0ab27368a345 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -503,7 +503,7 @@ static int add_jump_destinations(struct objtool_file *file) insn->type != INSN_JUMP_UNCONDITIONAL) continue;
- if (insn->ignore || insn->offset == FAKE_JUMP_OFFSET) + if (insn->offset == FAKE_JUMP_OFFSET) continue;
rela = find_rela_by_dest_range(insn->sec, insn->offset,
linux-stable-mirror@lists.linaro.org
-
Sasha Levin