From: Johannes Berg johannes.berg@intel.com

[ Upstream commit 484004339d4514fde425f6e8a9f6a6cc979bb0c3 ]

Syzbot continues to try to create mac80211_hwsim radios, and manages to pass parameters that are later checked with WARN_ON in cfg80211 - catch another one in hwsim directly.

Reported-by: syzbot+2a12f11c306afe871c1f@syzkaller.appspotmail.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/wireless/mac80211_hwsim.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index d686ba10fecc..62fcf57e2299 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -3124,6 +3124,11 @@ static int hwsim_new_radio_nl(struct sk_buff *msg, struct genl_info *info) if (info->attrs[HWSIM_ATTR_CHANNELS]) param.channels = nla_get_u32(info->attrs[HWSIM_ATTR_CHANNELS]);

+ if (param.channels < 1) { + GENL_SET_ERR_MSG(info, "must have at least one channel"); + return -EINVAL; + } + if (param.channels > CFG80211_MAX_NUM_DIFFERENT_CHANNELS) { GENL_SET_ERR_MSG(info, "too many channels specified"); return -EINVAL;

From: Anand Jain anand.jain@oracle.com

[ Upstream commit 801660b040d132f67fac6a95910ad307c5929b49 ]

Test case btrfs/164 reports use-after-free:

[ 6712.084324] general protection fault: 0000 [#1] PREEMPT SMP .. [ 6712.195423] btrfs_update_commit_device_size+0x75/0xf0 [btrfs] [ 6712.201424] btrfs_commit_transaction+0x57d/0xa90 [btrfs] [ 6712.206999] btrfs_rm_device+0x627/0x850 [btrfs] [ 6712.211800] btrfs_ioctl+0x2b03/0x3120 [btrfs]

Reason for this is that btrfs_shrink_device adds the resized device to the fs_devices::resized_devices after it has called the last commit transaction.

So the list fs_devices::resized_devices is not empty when btrfs_shrink_device returns. Now the parent function btrfs_rm_device calls:

btrfs_close_bdev(device); call_rcu(&device->rcu, free_device_rcu);

and then does the transactio ncommit. It goes through the fs_devices::resized_devices in btrfs_update_commit_device_size and leads to use-after-free.

Fix this by making sure btrfs_shrink_device calls the last needed btrfs_commit_transaction before the return. This is consistent with what the grow counterpart does and this makes sure the on-disk state is persistent when the function returns.

Reported-by: Lu Fengqi lufq.fnst@cn.fujitsu.com Tested-by: Lu Fengqi lufq.fnst@cn.fujitsu.com Signed-off-by: Anand Jain anand.jain@oracle.com Reviewed-by: David Sterba dsterba@suse.com [ update changelog ] Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- fs/btrfs/volumes.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index a39b1f0b0606..a0947f4a3e87 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -4517,7 +4517,12 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size)

/* Now btrfs_update_device() will change the on-disk size. */ ret = btrfs_update_device(trans, device); - btrfs_end_transaction(trans); + if (ret < 0) { + btrfs_abort_transaction(trans, ret); + btrfs_end_transaction(trans); + } else { + ret = btrfs_commit_transaction(trans); + } done: btrfs_free_path(path); if (ret) {

From: Danek Duvall duvall@comfychair.org

[ Upstream commit 67d1ba8a6dc83d90cd58b89fa6cbf9ae35a0cf7f ]

The mod mask for VHT capabilities intends to say that you can override the number of STBC receive streams, and it does, but only by accident. The IEEE80211_VHT_CAP_RXSTBC_X aren't bits to be set, but values (albeit left-shifted). ORing the bits together gets the right answer, but we should use the _MASK macro here instead.

Signed-off-by: Danek Duvall duvall@comfychair.org Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- net/mac80211/main.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c index cb5b22b61388..9a3dd1467e24 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -467,10 +467,7 @@ static const struct ieee80211_vht_cap mac80211_vht_capa_mod_mask = { cpu_to_le32(IEEE80211_VHT_CAP_RXLDPC | IEEE80211_VHT_CAP_SHORT_GI_80 | IEEE80211_VHT_CAP_SHORT_GI_160 | - IEEE80211_VHT_CAP_RXSTBC_1 | - IEEE80211_VHT_CAP_RXSTBC_2 | - IEEE80211_VHT_CAP_RXSTBC_3 | - IEEE80211_VHT_CAP_RXSTBC_4 | + IEEE80211_VHT_CAP_RXSTBC_MASK | IEEE80211_VHT_CAP_TXSTBC | IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |

From: Michael Hennerich michael.hennerich@analog.com

[ Upstream commit 6537886cdc9a637711fd6da980dbb87c2c87c9aa ]

This fixes: [BUG] gpio: gpio-adp5588: A possible sleep-in-atomic-context bug in adp5588_gpio_write() [BUG] gpio: gpio-adp5588: A possible sleep-in-atomic-context bug in adp5588_gpio_direction_input()

Reported-by: Jia-Ju Bai baijiaju1990@gmail.com Signed-off-by: Michael Hennerich michael.hennerich@analog.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/gpio/gpio-adp5588.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-adp5588.c b/drivers/gpio/gpio-adp5588.c index e717f8dc3966..202d367a21e4 100644 --- a/drivers/gpio/gpio-adp5588.c +++ b/drivers/gpio/gpio-adp5588.c @@ -41,6 +41,8 @@ struct adp5588_gpio { uint8_t int_en[3]; uint8_t irq_mask[3]; uint8_t irq_stat[3]; + uint8_t int_input_en[3]; + uint8_t int_lvl_cached[3]; };

static int adp5588_gpio_read(struct i2c_client *client, u8 reg) @@ -173,12 +175,28 @@ static void adp5588_irq_bus_sync_unlock(struct irq_data *d) struct adp5588_gpio *dev = irq_data_get_irq_chip_data(d); int i;

- for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) + for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) { + if (dev->int_input_en[i]) { + mutex_lock(&dev->lock); + dev->dir[i] &= ~dev->int_input_en[i]; + dev->int_input_en[i] = 0; + adp5588_gpio_write(dev->client, GPIO_DIR1 + i, + dev->dir[i]); + mutex_unlock(&dev->lock); + } + + if (dev->int_lvl_cached[i] != dev->int_lvl[i]) { + dev->int_lvl_cached[i] = dev->int_lvl[i]; + adp5588_gpio_write(dev->client, GPIO_INT_LVL1 + i, + dev->int_lvl[i]); + } + if (dev->int_en[i] ^ dev->irq_mask[i]) { dev->int_en[i] = dev->irq_mask[i]; adp5588_gpio_write(dev->client, GPIO_INT_EN1 + i, dev->int_en[i]); } + }

mutex_unlock(&dev->irq_lock); } @@ -221,9 +239,7 @@ static int adp5588_irq_set_type(struct irq_data *d, unsigned int type) else return -EINVAL;

- adp5588_gpio_direction_input(&dev->gpio_chip, gpio); - adp5588_gpio_write(dev->client, GPIO_INT_LVL1 + bank, - dev->int_lvl[bank]); + dev->int_input_en[bank] |= bit;

return 0; }

From: Andy Shevchenko andriy.shevchenko@linux.intel.com

[ Upstream commit 993b9bc5c47fda86f8ab4e53d68c6fea5ff2764a ]

The commit ca876c7483b6

("gpiolib-acpi: make sure we trigger edge events at least once on boot")

added a initial value check for pin which is about to be locked as IRQ. Unfortunately, not all GPIO drivers can do that atomically. Thus, switch to cansleep version of the call. Otherwise we have a warning:

... WARNING: CPU: 2 PID: 1408 at drivers/gpio/gpiolib.c:2883 gpiod_get_value+0x46/0x50 ... RIP: 0010:gpiod_get_value+0x46/0x50 ...

The change tested on Intel Broxton with Whiskey Cove PMIC GPIO controller.

Fixes: ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot") Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Cc: Hans de Goede hdegoede@redhat.com Cc: Benjamin Tissoires benjamin.tissoires@redhat.com Acked-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/gpio/gpiolib-acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index 70b3c556f6cf..582dde355bde 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -247,7 +247,7 @@ static acpi_status acpi_gpiochip_request_interrupt(struct acpi_resource *ares,

gpiod_direction_input(desc);

- value = gpiod_get_value(desc); + value = gpiod_get_value_cansleep(desc);

ret = gpiochip_lock_as_irq(chip, pin); if (ret) {

From: Peng Li lipeng321@huawei.com

[ Upstream commit 31fabbee8f5c658c3fa1603c66e9e4f51ea8c2c6 ]

If there are packets in hardware when changing the speed or duplex, it may cause hardware hang up.

This patch adds the code for waiting chip to clean the all pkts(TX & RX) in chip when the driver uses the function named "adjust link".

This patch cleans the pkts as follows: 1) close rx of chip, close tx of protocol stack. 2) wait rcb, ppe, mac to clean. 3) adjust link 4) open rx of chip, open tx of protocol stack.

Signed-off-by: Peng Li lipeng321@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/ethernet/hisilicon/hns/hnae.h | 2 + .../net/ethernet/hisilicon/hns/hns_ae_adapt.c | 67 ++++++++++++++++++- .../ethernet/hisilicon/hns/hns_dsaf_gmac.c | 36 ++++++++++ .../net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 44 ++++++++++++ .../net/ethernet/hisilicon/hns/hns_dsaf_mac.h | 8 +++ .../ethernet/hisilicon/hns/hns_dsaf_main.c | 29 ++++++++ .../ethernet/hisilicon/hns/hns_dsaf_main.h | 3 + .../net/ethernet/hisilicon/hns/hns_dsaf_ppe.c | 23 +++++++ .../net/ethernet/hisilicon/hns/hns_dsaf_ppe.h | 1 + .../net/ethernet/hisilicon/hns/hns_dsaf_rcb.c | 23 +++++++ .../net/ethernet/hisilicon/hns/hns_dsaf_rcb.h | 1 + .../net/ethernet/hisilicon/hns/hns_dsaf_reg.h | 1 + drivers/net/ethernet/hisilicon/hns/hns_enet.c | 21 +++++- 13 files changed, 255 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hnae.h b/drivers/net/ethernet/hisilicon/hns/hnae.h index fa5b30f547f6..427866b9564e 100644 --- a/drivers/net/ethernet/hisilicon/hns/hnae.h +++ b/drivers/net/ethernet/hisilicon/hns/hnae.h @@ -486,6 +486,8 @@ struct hnae_ae_ops { u8 *auto_neg, u16 *speed, u8 *duplex); void (*toggle_ring_irq)(struct hnae_ring *ring, u32 val); void (*adjust_link)(struct hnae_handle *handle, int speed, int duplex); + bool (*need_adjust_link)(struct hnae_handle *handle, + int speed, int duplex); int (*set_loopback)(struct hnae_handle *handle, enum hnae_loop loop_mode, int en); void (*get_ring_bdnum_limit)(struct hnae_queue *queue, diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c index bd68379d2bea..bf930ab3c2bd 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c @@ -155,6 +155,41 @@ static void hns_ae_put_handle(struct hnae_handle *handle) hns_ae_get_ring_pair(handle->qs[i])->used_by_vf = 0; }

+static int hns_ae_wait_flow_down(struct hnae_handle *handle) +{ + struct dsaf_device *dsaf_dev; + struct hns_ppe_cb *ppe_cb; + struct hnae_vf_cb *vf_cb; + int ret; + int i; + + for (i = 0; i < handle->q_num; i++) { + ret = hns_rcb_wait_tx_ring_clean(handle->qs[i]); + if (ret) + return ret; + } + + ppe_cb = hns_get_ppe_cb(handle); + ret = hns_ppe_wait_tx_fifo_clean(ppe_cb); + if (ret) + return ret; + + dsaf_dev = hns_ae_get_dsaf_dev(handle->dev); + if (!dsaf_dev) + return -EINVAL; + ret = hns_dsaf_wait_pkt_clean(dsaf_dev, handle->dport_id); + if (ret) + return ret; + + vf_cb = hns_ae_get_vf_cb(handle); + ret = hns_mac_wait_fifo_clean(vf_cb->mac_cb); + if (ret) + return ret; + + mdelay(10); + return 0; +} + static void hns_ae_ring_enable_all(struct hnae_handle *handle, int val) { int q_num = handle->q_num; @@ -399,12 +434,41 @@ static int hns_ae_get_mac_info(struct hnae_handle *handle, return hns_mac_get_port_info(mac_cb, auto_neg, speed, duplex); }

+static bool hns_ae_need_adjust_link(struct hnae_handle *handle, int speed, + int duplex) +{ + struct hns_mac_cb *mac_cb = hns_get_mac_cb(handle); + + return hns_mac_need_adjust_link(mac_cb, speed, duplex); +} + static void hns_ae_adjust_link(struct hnae_handle *handle, int speed, int duplex) { struct hns_mac_cb *mac_cb = hns_get_mac_cb(handle);

- hns_mac_adjust_link(mac_cb, speed, duplex); + switch (mac_cb->dsaf_dev->dsaf_ver) { + case AE_VERSION_1: + hns_mac_adjust_link(mac_cb, speed, duplex); + break; + + case AE_VERSION_2: + /* chip need to clear all pkt inside */ + hns_mac_disable(mac_cb, MAC_COMM_MODE_RX); + if (hns_ae_wait_flow_down(handle)) { + hns_mac_enable(mac_cb, MAC_COMM_MODE_RX); + break; + } + + hns_mac_adjust_link(mac_cb, speed, duplex); + hns_mac_enable(mac_cb, MAC_COMM_MODE_RX); + break; + + default: + break; + } + + return; }

static void hns_ae_get_ring_bdnum_limit(struct hnae_queue *queue, @@ -902,6 +966,7 @@ static struct hnae_ae_ops hns_dsaf_ops = { .get_status = hns_ae_get_link_status, .get_info = hns_ae_get_mac_info, .adjust_link = hns_ae_adjust_link, + .need_adjust_link = hns_ae_need_adjust_link, .set_loopback = hns_ae_config_loopback, .get_ring_bdnum_limit = hns_ae_get_ring_bdnum_limit, .get_pauseparam = hns_ae_get_pauseparam, diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c index 74bd260ca02a..8c7bc5cf193c 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c @@ -257,6 +257,16 @@ static void hns_gmac_get_pausefrm_cfg(void *mac_drv, u32 *rx_pause_en, *tx_pause_en = dsaf_get_bit(pause_en, GMAC_PAUSE_EN_TX_FDFC_B); }

+static bool hns_gmac_need_adjust_link(void *mac_drv, enum mac_speed speed, + int duplex) +{ + struct mac_driver *drv = (struct mac_driver *)mac_drv; + struct hns_mac_cb *mac_cb = drv->mac_cb; + + return (mac_cb->speed != speed) || + (mac_cb->half_duplex == duplex); +} + static int hns_gmac_adjust_link(void *mac_drv, enum mac_speed speed, u32 full_duplex) { @@ -309,6 +319,30 @@ static void hns_gmac_set_promisc(void *mac_drv, u8 en) hns_gmac_set_uc_match(mac_drv, en); }

+int hns_gmac_wait_fifo_clean(void *mac_drv) +{ + struct mac_driver *drv = (struct mac_driver *)mac_drv; + int wait_cnt; + u32 val; + + wait_cnt = 0; + while (wait_cnt++ < HNS_MAX_WAIT_CNT) { + val = dsaf_read_dev(drv, GMAC_FIFO_STATE_REG); + /* bit5~bit0 is not send complete pkts */ + if ((val & 0x3f) == 0) + break; + usleep_range(100, 200); + } + + if (wait_cnt >= HNS_MAX_WAIT_CNT) { + dev_err(drv->dev, + "hns ge %d fifo was not idle.\n", drv->mac_id); + return -EBUSY; + } + + return 0; +} + static void hns_gmac_init(void *mac_drv) { u32 port; @@ -690,6 +724,7 @@ void *hns_gmac_config(struct hns_mac_cb *mac_cb, struct mac_params *mac_param) mac_drv->mac_disable = hns_gmac_disable; mac_drv->mac_free = hns_gmac_free; mac_drv->adjust_link = hns_gmac_adjust_link; + mac_drv->need_adjust_link = hns_gmac_need_adjust_link; mac_drv->set_tx_auto_pause_frames = hns_gmac_set_tx_auto_pause_frames; mac_drv->config_max_frame_length = hns_gmac_config_max_frame_length; mac_drv->mac_pausefrm_cfg = hns_gmac_pause_frm_cfg; @@ -717,6 +752,7 @@ void *hns_gmac_config(struct hns_mac_cb *mac_cb, struct mac_params *mac_param) mac_drv->get_strings = hns_gmac_get_strings; mac_drv->update_stats = hns_gmac_update_stats; mac_drv->set_promiscuous = hns_gmac_set_promisc; + mac_drv->wait_fifo_clean = hns_gmac_wait_fifo_clean;

return (void *)mac_drv; } diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c index 8b5cdf490850..5a8dbd72fe45 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c @@ -114,6 +114,26 @@ int hns_mac_get_port_info(struct hns_mac_cb *mac_cb, return 0; }

+/** + *hns_mac_is_adjust_link - check is need change mac speed and duplex register + *@mac_cb: mac device + *@speed: phy device speed + *@duplex:phy device duplex + * + */ +bool hns_mac_need_adjust_link(struct hns_mac_cb *mac_cb, int speed, int duplex) +{ + struct mac_driver *mac_ctrl_drv; + + mac_ctrl_drv = (struct mac_driver *)(mac_cb->priv.mac); + + if (mac_ctrl_drv->need_adjust_link) + return mac_ctrl_drv->need_adjust_link(mac_ctrl_drv, + (enum mac_speed)speed, duplex); + else + return true; +} + void hns_mac_adjust_link(struct hns_mac_cb *mac_cb, int speed, int duplex) { int ret; @@ -432,6 +452,16 @@ int hns_mac_vm_config_bc_en(struct hns_mac_cb *mac_cb, u32 vmid, bool enable) return 0; }

+int hns_mac_wait_fifo_clean(struct hns_mac_cb *mac_cb) +{ + struct mac_driver *drv = hns_mac_get_drv(mac_cb); + + if (drv->wait_fifo_clean) + return drv->wait_fifo_clean(drv); + + return 0; +} + void hns_mac_reset(struct hns_mac_cb *mac_cb) { struct mac_driver *drv = hns_mac_get_drv(mac_cb); @@ -1001,6 +1031,20 @@ static int hns_mac_get_max_port_num(struct dsaf_device *dsaf_dev) return DSAF_MAX_PORT_NUM; }

+void hns_mac_enable(struct hns_mac_cb *mac_cb, enum mac_commom_mode mode) +{ + struct mac_driver *mac_ctrl_drv = hns_mac_get_drv(mac_cb); + + mac_ctrl_drv->mac_enable(mac_cb->priv.mac, mode); +} + +void hns_mac_disable(struct hns_mac_cb *mac_cb, enum mac_commom_mode mode) +{ + struct mac_driver *mac_ctrl_drv = hns_mac_get_drv(mac_cb); + + mac_ctrl_drv->mac_disable(mac_cb->priv.mac, mode); +} + /** * hns_mac_init - init mac * @dsaf_dev: dsa fabric device struct pointer diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h index bbc0a98e7ca3..fbc75341bef7 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h @@ -356,6 +356,9 @@ struct mac_driver { /*adjust mac mode of port,include speed and duplex*/ int (*adjust_link)(void *mac_drv, enum mac_speed speed, u32 full_duplex); + /* need adjust link */ + bool (*need_adjust_link)(void *mac_drv, enum mac_speed speed, + int duplex); /* config autoegotaite mode of port*/ void (*set_an_mode)(void *mac_drv, u8 enable); /* config loopbank mode */ @@ -394,6 +397,7 @@ struct mac_driver { void (*get_info)(void *mac_drv, struct mac_info *mac_info);

void (*update_stats)(void *mac_drv); + int (*wait_fifo_clean)(void *mac_drv);

enum mac_mode mac_mode; u8 mac_id; @@ -427,6 +431,7 @@ void *hns_xgmac_config(struct hns_mac_cb *mac_cb,

int hns_mac_init(struct dsaf_device *dsaf_dev); void mac_adjust_link(struct net_device *net_dev); +bool hns_mac_need_adjust_link(struct hns_mac_cb *mac_cb, int speed, int duplex); void hns_mac_get_link_status(struct hns_mac_cb *mac_cb, u32 *link_status); int hns_mac_change_vf_addr(struct hns_mac_cb *mac_cb, u32 vmid, char *addr); int hns_mac_set_multi(struct hns_mac_cb *mac_cb, @@ -463,5 +468,8 @@ int hns_mac_add_uc_addr(struct hns_mac_cb *mac_cb, u8 vf_id, int hns_mac_rm_uc_addr(struct hns_mac_cb *mac_cb, u8 vf_id, const unsigned char *addr); int hns_mac_clr_multicast(struct hns_mac_cb *mac_cb, int vfn); +void hns_mac_enable(struct hns_mac_cb *mac_cb, enum mac_commom_mode mode); +void hns_mac_disable(struct hns_mac_cb *mac_cb, enum mac_commom_mode mode); +int hns_mac_wait_fifo_clean(struct hns_mac_cb *mac_cb);

#endif /* _HNS_DSAF_MAC_H */ diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c index e0bc79ea3d88..1f056a6b167e 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c @@ -2720,6 +2720,35 @@ void hns_dsaf_set_promisc_tcam(struct dsaf_device *dsaf_dev, soft_mac_entry->index = enable ? entry_index : DSAF_INVALID_ENTRY_IDX; }

+int hns_dsaf_wait_pkt_clean(struct dsaf_device *dsaf_dev, int port) +{ + u32 val, val_tmp; + int wait_cnt; + + if (port >= DSAF_SERVICE_NW_NUM) + return 0; + + wait_cnt = 0; + while (wait_cnt++ < HNS_MAX_WAIT_CNT) { + val = dsaf_read_dev(dsaf_dev, DSAF_VOQ_IN_PKT_NUM_0_REG + + (port + DSAF_XGE_NUM) * 0x40); + val_tmp = dsaf_read_dev(dsaf_dev, DSAF_VOQ_OUT_PKT_NUM_0_REG + + (port + DSAF_XGE_NUM) * 0x40); + if (val == val_tmp) + break; + + usleep_range(100, 200); + } + + if (wait_cnt >= HNS_MAX_WAIT_CNT) { + dev_err(dsaf_dev->dev, "hns dsaf clean wait timeout(%u - %u).\n", + val, val_tmp); + return -EBUSY; + } + + return 0; +} + /** * dsaf_probe - probo dsaf dev * @pdev: dasf platform device diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h index 4507e8222683..0e1cd99831a6 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h @@ -44,6 +44,8 @@ struct hns_mac_cb; #define DSAF_ROCE_CREDIT_CHN 8 #define DSAF_ROCE_CHAN_MODE 3

+#define HNS_MAX_WAIT_CNT 10000 + enum dsaf_roce_port_mode { DSAF_ROCE_6PORT_MODE, DSAF_ROCE_4PORT_MODE, @@ -463,5 +465,6 @@ int hns_dsaf_rm_mac_addr(

int hns_dsaf_clr_mac_mc_port(struct dsaf_device *dsaf_dev, u8 mac_id, u8 port_num); +int hns_dsaf_wait_pkt_clean(struct dsaf_device *dsaf_dev, int port);

#endif /* __HNS_DSAF_MAIN_H__ */ diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c index 93e71e27401b..a19932aeb9d7 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c @@ -274,6 +274,29 @@ static void hns_ppe_exc_irq_en(struct hns_ppe_cb *ppe_cb, int en) dsaf_write_dev(ppe_cb, PPE_INTEN_REG, msk_vlue & vld_msk); }

+int hns_ppe_wait_tx_fifo_clean(struct hns_ppe_cb *ppe_cb) +{ + int wait_cnt; + u32 val; + + wait_cnt = 0; + while (wait_cnt++ < HNS_MAX_WAIT_CNT) { + val = dsaf_read_dev(ppe_cb, PPE_CURR_TX_FIFO0_REG) & 0x3ffU; + if (!val) + break; + + usleep_range(100, 200); + } + + if (wait_cnt >= HNS_MAX_WAIT_CNT) { + dev_err(ppe_cb->dev, "hns ppe tx fifo clean wait timeout, still has %u pkt.\n", + val); + return -EBUSY; + } + + return 0; +} + /** * ppe_init_hw - init ppe * @ppe_cb: ppe device diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.h index 9d8e643e8aa6..f670e63a5a01 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.h +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.h @@ -100,6 +100,7 @@ struct ppe_common_cb {

};

+int hns_ppe_wait_tx_fifo_clean(struct hns_ppe_cb *ppe_cb); int hns_ppe_init(struct dsaf_device *dsaf_dev);

void hns_ppe_uninit(struct dsaf_device *dsaf_dev); diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c index e2e28532e4dc..1e43d7a3ca86 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c @@ -66,6 +66,29 @@ void hns_rcb_wait_fbd_clean(struct hnae_queue **qs, int q_num, u32 flag) "queue(%d) wait fbd(%d) clean fail!!\n", i, fbd_num); }

+int hns_rcb_wait_tx_ring_clean(struct hnae_queue *qs) +{ + u32 head, tail; + int wait_cnt; + + tail = dsaf_read_dev(&qs->tx_ring, RCB_REG_TAIL); + wait_cnt = 0; + while (wait_cnt++ < HNS_MAX_WAIT_CNT) { + head = dsaf_read_dev(&qs->tx_ring, RCB_REG_HEAD); + if (tail == head) + break; + + usleep_range(100, 200); + } + + if (wait_cnt >= HNS_MAX_WAIT_CNT) { + dev_err(qs->dev->dev, "rcb wait timeout, head not equal to tail.\n"); + return -EBUSY; + } + + return 0; +} + /** *hns_rcb_reset_ring_hw - ring reset *@q: ring struct pointer diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.h index 602816498c8d..2319b772a271 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.h +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.h @@ -136,6 +136,7 @@ void hns_rcbv2_int_clr_hw(struct hnae_queue *q, u32 flag); void hns_rcb_init_hw(struct ring_pair_cb *ring); void hns_rcb_reset_ring_hw(struct hnae_queue *q); void hns_rcb_wait_fbd_clean(struct hnae_queue **qs, int q_num, u32 flag); +int hns_rcb_wait_tx_ring_clean(struct hnae_queue *qs); u32 hns_rcb_get_rx_coalesced_frames( struct rcb_common_cb *rcb_common, u32 port_idx); u32 hns_rcb_get_tx_coalesced_frames( diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h index 46a52d9bb196..6d20e4eb7402 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h @@ -464,6 +464,7 @@ #define RCB_RING_INTMSK_TX_OVERTIME_REG 0x000C4 #define RCB_RING_INTSTS_TX_OVERTIME_REG 0x000C8

+#define GMAC_FIFO_STATE_REG 0x0000UL #define GMAC_DUPLEX_TYPE_REG 0x0008UL #define GMAC_FD_FC_TYPE_REG 0x000CUL #define GMAC_TX_WATER_LINE_REG 0x0010UL diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c index e77192683dba..e3945fd1bc0e 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -1212,11 +1212,26 @@ static void hns_nic_adjust_link(struct net_device *ndev) struct hnae_handle *h = priv->ae_handle; int state = 1;

+ /* If there is no phy, do not need adjust link */ if (ndev->phydev) { - h->dev->ops->adjust_link(h, ndev->phydev->speed, - ndev->phydev->duplex); - state = ndev->phydev->link; + /* When phy link down, do nothing */ + if (ndev->phydev->link == 0) + return; + + if (h->dev->ops->need_adjust_link(h, ndev->phydev->speed, + ndev->phydev->duplex)) { + /* because Hi161X chip don't support to change gmac + * speed and duplex with traffic. Delay 200ms to + * make sure there is no more data in chip FIFO. + */ + netif_carrier_off(ndev); + msleep(200); + h->dev->ops->adjust_link(h, ndev->phydev->speed, + ndev->phydev->duplex); + netif_carrier_on(ndev); + } } + state = state && h->dev->ops->get_status(h);

if (state != priv->link) {

From: Arunk Khandavalli akhandav@codeaurora.org

[ Upstream commit 4f0223bfe9c3e62d8f45a85f1ef1b18a8a263ef9 ]

nl80211_update_ft_ies() tried to validate NL80211_ATTR_IE with is_valid_ie_attr() before dereferencing it, but that helper function returns true in case of NULL pointer (i.e., attribute not included). This can result to dereferencing a NULL pointer. Fix that by explicitly checking that NL80211_ATTR_IE is included.

Fixes: 355199e02b83 ("cfg80211: Extend support for IEEE 802.11r Fast BSS Transition") Signed-off-by: Arunk Khandavalli akhandav@codeaurora.org Signed-off-by: Jouni Malinen jouni@codeaurora.org Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- net/wireless/nl80211.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 753f3e73c498..3de415bca391 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -11679,6 +11679,7 @@ static int nl80211_update_ft_ies(struct sk_buff *skb, struct genl_info *info) return -EOPNOTSUPP;

if (!info->attrs[NL80211_ATTR_MDID] || + !info->attrs[NL80211_ATTR_IE] || !is_valid_ie_attr(info->attrs[NL80211_ATTR_IE])) return -EINVAL;

From: Lorenzo Bianconi lorenzo.bianconi@redhat.com

[ Upstream commit 1eb507903665442360a959136dfa3234c43db085 ]

Do not start to aggregate packets in a A-MSDU frame (converting the first subframe to A-MSDU, adding the header) if max_tx_fragments or max_amsdu_subframes limits are already exceeded by it. In particular, this happens when drivers set the limit to 1 to avoid A-MSDUs at all.

Signed-off-by: Lorenzo Bianconi lorenzo.bianconi@redhat.com [reword commit message to be more precise] Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- net/mac80211/tx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 2064234500cf..fd8dafe73aec 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -3157,9 +3157,6 @@ static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata, if (skb->len + head->len > max_amsdu_len) goto out;

- if (!ieee80211_amsdu_prepare_head(sdata, fast_tx, head)) - goto out; - nfrags = 1 + skb_shinfo(skb)->nr_frags; nfrags += 1 + skb_shinfo(head)->nr_frags; frag_tail = &skb_shinfo(head)->frag_list; @@ -3175,6 +3172,9 @@ static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata, if (max_frags && nfrags > max_frags) goto out;

+ if (!ieee80211_amsdu_prepare_head(sdata, fast_tx, head)) + goto out; + /* * Pad out the previous subframe to a multiple of 4 by adding the * padding to the next one, that's being added. Note that head->len

From: Stefan Raspl stefan.raspl@de.ibm.com

[ Upstream commit 617c66b9f236d20f11cecbb3f45e6d5675b2fae1 ]

When filtering by guest, kvm_stat displays garbage when the guest is destroyed - see sample output below. We add code to remove the invalid paths from the providers, so at least no more garbage is displayed. Here's a sample output to illustrate:

kvm statistics - pid 13986 (foo)

Event Total %Total CurAvg/s diagnose_258 -2 0.0 0 deliver_program_interruption -3 0.0 0 diagnose_308 -4 0.0 0 halt_poll_invalid -91 0.0 -6 deliver_service_signal -244 0.0 -16 halt_successful_poll -250 0.1 -17 exit_pei -285 0.1 -19 exit_external_request -312 0.1 -21 diagnose_9c -328 0.1 -22 userspace_handled -713 0.1 -47 halt_attempted_poll -939 0.2 -62 deliver_emergency_signal -3126 0.6 -208 halt_wakeup -7199 1.5 -481 exit_wait_state -7379 1.5 -493 diagnose_500 -56499 11.5 -3757 exit_null -85491 17.4 -5685 diagnose_44 -133300 27.1 -8874 exit_instruction -195898 39.8 -13037 Total -492063

Signed-off-by: Stefan Raspl raspl@linux.vnet.ibm.com Signed-off-by: Radim Krčmář rkrcmar@redhat.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- tools/kvm/kvm_stat/kvm_stat | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/tools/kvm/kvm_stat/kvm_stat b/tools/kvm/kvm_stat/kvm_stat index 40cf64c7ac3b..c0d653d36c0f 100755 --- a/tools/kvm/kvm_stat/kvm_stat +++ b/tools/kvm/kvm_stat/kvm_stat @@ -731,6 +731,13 @@ class DebugfsProvider(Provider): self.do_read = True self.reset()

+ def _verify_paths(self): + """Remove invalid paths""" + for path in self.paths: + if not os.path.exists(os.path.join(PATH_DEBUGFS_KVM, path)): + self.paths.remove(path) + continue + def read(self, reset=0, by_guest=0): """Returns a dict with format:'file name / field -> current value'.

@@ -745,6 +752,7 @@ class DebugfsProvider(Provider): # If no debugfs filtering support is available, then don't read. if not self.do_read: return results + self._verify_paths()

paths = self.paths if self._pid == 0:

From: Will Deacon will.deacon@arm.com

[ Upstream commit 3fcbb8260a87efb691d837e8cd24e81f65b3eb70 ]

In 4.19-rc1, Eugeniy reported weird boot and IO errors on ARC HSDK

| INFO: task syslogd:77 blocked for more than 10 seconds. | Not tainted 4.19.0-rc1-00007-gf213acea4e88 #40 | "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this | message. | syslogd D 0 77 76 0x00000000 | | Stack Trace: | __switch_to+0x0/0xac | __schedule+0x1b2/0x730 | io_schedule+0x5c/0xc0 | __lock_page+0x98/0xdc | find_lock_entry+0x38/0x100 | shmem_getpage_gfp.isra.3+0x82/0xbfc | shmem_fault+0x46/0x138 | handle_mm_fault+0x5bc/0x924 | do_page_fault+0x100/0x2b8 | ret_from_exception+0x0/0x8

He bisected to 84c6591103db ("locking/atomics, asm-generic/bitops/lock.h: Rewrite using atomic_fetch_*()")

This commit however only unmasked the real issue introduced by commit 4aef66c8ae9 ("locking/atomic, arch/arc: Fix build") which missed the retry-if-scond-failed branch in atomic_fetch_##op() macros.

The bisected commit started using atomic_fetch_##op() macros for building the rest of atomics.

Fixes: 4aef66c8ae9 ("locking/atomic, arch/arc: Fix build") Reported-by: Eugeniy Paltsev paltsev@synopsys.com Acked-by: Peter Zijlstra (Intel) peterz@infradead.org Signed-off-by: Will Deacon will.deacon@arm.com Signed-off-by: Vineet Gupta vgupta@synopsys.com [vgupta: wrote changelog] Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- arch/arc/include/asm/atomic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h index 11859287c52a..c98b59ac0612 100644 --- a/arch/arc/include/asm/atomic.h +++ b/arch/arc/include/asm/atomic.h @@ -84,7 +84,7 @@ static inline int atomic_fetch_##op(int i, atomic_t *v) \ "1: llock %[orig], [%[ctr]] \n" \ " " #asm_op " %[val], %[orig], %[i] \n" \ " scond %[val], [%[ctr]] \n" \ - " \n" \ + " bnz 1b \n" \ : [val] "=&r" (val), \ [orig] "=&r" (orig) \ : [ctr] "r" (&v->counter), \

From: Xiao Ni xni@redhat.com

[ Upstream commit 1d0ffd264204eba1861865560f1f7f7a92919384 ]

In raid10 reshape_request it gets max_sectors in read_balance. If the underlayer disks have bad blocks, the max_sectors is less than last. It will call goto read_more many times. It calls raise_barrier(conf, sectors_done != 0) every time. In this condition sectors_done is not 0. So the value passed to the argument force of raise_barrier is true.

In raise_barrier it checks conf->barrier when force is true. If force is true and conf->barrier is 0, it panic. In this case reshape_request submits bio to under layer disks. And in the callback function of the bio it calls lower_barrier. If the bio finishes before calling raise_barrier again, it can trigger the BUG_ON.

Add one pair of raise_barrier/lower_barrier to fix this bug.

Signed-off-by: Xiao Ni xni@redhat.com Suggested-by: Neil Brown neilb@suse.com Signed-off-by: Shaohua Li shli@fb.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/md/raid10.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 262a0f0f8fd5..927b60e9d3ca 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -4394,11 +4394,12 @@ static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr, allow_barrier(conf); }

+ raise_barrier(conf, 0); read_more: /* Now schedule reads for blocks from sector_nr to last */ r10_bio = raid10_alloc_init_r10buf(conf); r10_bio->state = 0; - raise_barrier(conf, sectors_done != 0); + raise_barrier(conf, 1); atomic_set(&r10_bio->remaining, 0); r10_bio->mddev = mddev; r10_bio->sector = sector_nr; @@ -4494,6 +4495,8 @@ static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr, if (sector_nr <= last) goto read_more;

+ lower_barrier(conf); + /* Now that we have done the whole section we can * update reshape_progress */

From: Tony Lindgren tony@atomide.com

[ Upstream commit 18eb8aea7fb2fb4490e578b1b8a1096c34b2fc48 ]

The cpsw-phy-sel device is not a child of the cpsw interconnect target module. It lives in the system control module.

Let's fix this issue by trying to use cpsw-phy-sel phandle first if it exists and if not fall back to current usage of trying to find the cpsw-phy-sel child. That way the phy sel driver can be a child of the system control module where it belongs in the device tree.

Without this fix, we cannot have a proper interconnect target module hierarchy in device tree for things like genpd.

Note that deferred probe is mostly not supported by cpsw and this patch does not attempt to fix that. In case deferred probe support is needed, this could be added to cpsw_slave_open() and phy_connect() so they start handling and returning errors.

For documenting it, looks like the cpsw-phy-sel is used for all cpsw device tree nodes. It's missing the related binding documentation, so let's also update the binding documentation accordingly.

Cc: devicetree@vger.kernel.org Cc: Andrew Lunn andrew@lunn.ch Cc: Grygorii Strashko grygorii.strashko@ti.com Cc: Ivan Khoronzhuk ivan.khoronzhuk@linaro.org Cc: Mark Rutland mark.rutland@arm.com Cc: Murali Karicheri m-karicheri2@ti.com Cc: Rob Herring robh+dt@kernel.org Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/ethernet/ti/cpsw-phy-sel.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw-phy-sel.c b/drivers/net/ethernet/ti/cpsw-phy-sel.c index 0c1adad7415d..396e1cd10667 100644 --- a/drivers/net/ethernet/ti/cpsw-phy-sel.c +++ b/drivers/net/ethernet/ti/cpsw-phy-sel.c @@ -170,10 +170,13 @@ void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave) struct device_node *node; struct cpsw_phy_sel_priv *priv;

- node = of_get_child_by_name(dev->of_node, "cpsw-phy-sel"); + node = of_parse_phandle(dev->of_node, "cpsw-phy-sel", 0); if (!node) { - dev_err(dev, "Phy mode driver DT not found\n"); - return; + node = of_get_child_by_name(dev->of_node, "cpsw-phy-sel"); + if (!node) { + dev_err(dev, "Phy mode driver DT not found\n"); + return; + } }

dev = bus_find_device(&platform_bus_type, NULL, node, match);

From: Masahiro Yamada yamada.masahiro@socionext.com

[ Upstream commit 4c85609b08c4761eca0a40fd7beb06bc650f252d ]

This driver currently emits a STOP if the next message is not I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR ioctl, where read/write transactions are combined without STOP between.

Issue STOP only when the message is the last one _or_ flagged with I2C_M_STOP.

Fixes: 6a62974b667f ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/i2c/busses/i2c-uniphier-f.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c index 9918bdd81619..a403e8579b65 100644 --- a/drivers/i2c/busses/i2c-uniphier-f.c +++ b/drivers/i2c/busses/i2c-uniphier-f.c @@ -401,11 +401,8 @@ static int uniphier_fi2c_master_xfer(struct i2c_adapter *adap, return ret;

for (msg = msgs; msg < emsg; msg++) { - /* If next message is read, skip the stop condition */ - bool stop = !(msg + 1 < emsg && msg[1].flags & I2C_M_RD); - /* but, force it if I2C_M_STOP is set */ - if (msg->flags & I2C_M_STOP) - stop = true; + /* Emit STOP if it is the last message or I2C_M_STOP is set. */ + bool stop = (msg + 1 == emsg) || (msg->flags & I2C_M_STOP);

ret = uniphier_fi2c_master_xfer_one(adap, msg, stop); if (ret)

From: Jon Kuhn jkuhn@barracuda.com

[ Upstream commit c15e3f19a6d5c89b1209dc94b40e568177cb0921 ]

When a Mac client saves an item containing a backslash to a file server the backslash is represented in the CIFS/SMB protocol as as U+F026. Before this change, listing a directory containing an item with a backslash in its name will return that item with the backslash represented with a true backslash character (U+005C) because convert_sfm_character mapped U+F026 to U+005C when interpretting the CIFS/SMB protocol response. However, attempting to open or stat the path using a true backslash will result in an error because convert_to_sfm_char does not map U+005C back to U+F026 causing the CIFS/SMB request to be made with the backslash represented as U+005C.

This change simply prevents the U+F026 to U+005C conversion from happenning. This is analogous to how the code does not do any translation of UNI_SLASH (U+F000).

Signed-off-by: Jon Kuhn jkuhn@barracuda.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- fs/cifs/cifs_unicode.c | 3 --- 1 file changed, 3 deletions(-)

diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c index b380e0871372..a2b2355e7f01 100644 --- a/fs/cifs/cifs_unicode.c +++ b/fs/cifs/cifs_unicode.c @@ -105,9 +105,6 @@ convert_sfm_char(const __u16 src_char, char *target) case SFM_LESSTHAN: *target = '<'; break; - case SFM_SLASH: - *target = '\'; - break; case SFM_SPACE: *target = ' '; break;

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 8442938c3a2177ba16043b3a935f2c78266ad399 ]

The "chandef->center_freq1" variable is a u32 but "freq" is a u16 so we are truncating away the high bits. I noticed this bug because in commit 9cf0a0b4b64a ("cfg80211: Add support for 60GHz band channels 5 and 6") we made "freq <= 56160 + 2160 * 6" a valid requency when before it was only "freq <= 56160 + 2160 * 4" that was valid. It introduces a static checker warning:

net/wireless/util.c:1571 ieee80211_chandef_to_operating_class() warn: always true condition '(freq <= 56160 + 2160 * 6) => (0-u16max <= 69120)'

But really we probably shouldn't have been truncating the high bits away to begin with.

Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- net/wireless/util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/wireless/util.c b/net/wireless/util.c index c1238d582fd1..ca3361a3e750 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1449,7 +1449,7 @@ bool ieee80211_chandef_to_operating_class(struct cfg80211_chan_def *chandef, u8 *op_class) { u8 vht_opclass; - u16 freq = chandef->center_freq1; + u32 freq = chandef->center_freq1;

if (freq >= 2412 && freq <= 2472) { if (chandef->width > NL80211_CHAN_WIDTH_40)

From: Emmanuel Grumbach emmanuel.grumbach@intel.com

[ Upstream commit 6c18b27d6e5c6a7206364eae2b47bc8d8b2fa68f ]

If the driver fails to properly prepare for the channel switch, mac80211 will disconnect. If the CSA IE had mode set to 1, it means that the clients are not allowed to send any Tx on the current channel, and that includes the deauthentication frame.

Make sure that we don't send the deauthentication frame in this case.

In iwlwifi, this caused a failure to flush queues since the firmware already closed the queues after having parsed the CSA IE. Then mac80211 would wait until the deauthentication frame would go out (drv_flush(drop=false)) and that would never happen.

Signed-off-by: Emmanuel Grumbach emmanuel.grumbach@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- net/mac80211/mlme.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a287b3891643..328ac10084e4 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1280,6 +1280,16 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, cbss->beacon_interval)); return; drop_connection: + /* + * This is just so that the disconnect flow will know that + * we were trying to switch channel and failed. In case the + * mode is 1 (we are not allowed to Tx), we will know not to + * send a deauthentication frame. Those two fields will be + * reset when the disconnection worker runs. + */ + sdata->vif.csa_active = true; + sdata->csa_block_tx = csa_ie.mode; + ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work); mutex_unlock(&local->chanctx_mtx); mutex_unlock(&local->mtx); @@ -2450,6 +2460,7 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; + bool tx;

sdata_lock(sdata); if (!ifmgd->associated) { @@ -2457,6 +2468,8 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) return; }

+ tx = !sdata->csa_block_tx; + /* AP is probably out of range (or not reachable for another reason) so * remove the bss struct for that AP. */ @@ -2464,7 +2477,7 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)

ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, - true, frame_buf); + tx, frame_buf); mutex_lock(&local->mtx); sdata->vif.csa_active = false; ifmgd->csa_waiting_bcn = false; @@ -2475,7 +2488,7 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) } mutex_unlock(&local->mtx);

- ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, + ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);

sdata_unlock(sdata);

From: Emmanuel Grumbach emmanuel.grumbach@intel.com

[ Upstream commit c6e57b3896fc76299913b8cfd82d853bee8a2c84 ]

When tracing is enabled, all the debug messages are recorded and must not exceed MAX_MSG_LEN (100) columns. Longer debug messages grant the user with:

WARNING: CPU: 3 PID: 32642 at /tmp/wifi-core-20180806094828/src/iwlwifi-stack-dev/net/mac80211/./trace_msg.h:32 trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Workqueue: phy1 ieee80211_iface_work [mac80211] RIP: 0010:trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Call Trace: __sdata_dbg+0xbd/0x120 [mac80211] ieee80211_ibss_rx_queued_mgmt+0x15f/0x510 [mac80211] ieee80211_iface_work+0x21d/0x320 [mac80211]

Signed-off-by: Emmanuel Grumbach emmanuel.grumbach@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- net/mac80211/ibss.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index e9c6aa3ed05b..3d0d12fbd8dd 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -947,8 +947,8 @@ static void ieee80211_rx_mgmt_deauth_ibss(struct ieee80211_sub_if_data *sdata, if (len < IEEE80211_DEAUTH_FRAME_LEN) return;

- ibss_dbg(sdata, "RX DeAuth SA=%pM DA=%pM BSSID=%pM (reason: %d)\n", - mgmt->sa, mgmt->da, mgmt->bssid, reason); + ibss_dbg(sdata, "RX DeAuth SA=%pM DA=%pM\n", mgmt->sa, mgmt->da); + ibss_dbg(sdata, "\tBSSID=%pM (reason: %d)\n", mgmt->bssid, reason); sta_info_destroy_addr(sdata, mgmt->sa); }

@@ -966,9 +966,9 @@ static void ieee80211_rx_mgmt_auth_ibss(struct ieee80211_sub_if_data *sdata, auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg); auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);

- ibss_dbg(sdata, - "RX Auth SA=%pM DA=%pM BSSID=%pM (auth_transaction=%d)\n", - mgmt->sa, mgmt->da, mgmt->bssid, auth_transaction); + ibss_dbg(sdata, "RX Auth SA=%pM DA=%pM\n", mgmt->sa, mgmt->da); + ibss_dbg(sdata, "\tBSSID=%pM (auth_transaction=%d)\n", + mgmt->bssid, auth_transaction);

if (auth_alg != WLAN_AUTH_OPEN || auth_transaction != 1) return; @@ -1175,10 +1175,10 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, rx_timestamp = drv_get_tsf(local, sdata); }

- ibss_dbg(sdata, - "RX beacon SA=%pM BSSID=%pM TSF=0x%llx BCN=0x%llx diff=%lld @%lu\n", + ibss_dbg(sdata, "RX beacon SA=%pM BSSID=%pM TSF=0x%llx\n", mgmt->sa, mgmt->bssid, - (unsigned long long)rx_timestamp, + (unsigned long long)rx_timestamp); + ibss_dbg(sdata, "\tBCN=0x%llx diff=%lld @%lu\n", (unsigned long long)beacon_timestamp, (unsigned long long)(rx_timestamp - beacon_timestamp), jiffies); @@ -1537,9 +1537,9 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,

tx_last_beacon = drv_tx_last_beacon(local);

- ibss_dbg(sdata, - "RX ProbeReq SA=%pM DA=%pM BSSID=%pM (tx_last_beacon=%d)\n", - mgmt->sa, mgmt->da, mgmt->bssid, tx_last_beacon); + ibss_dbg(sdata, "RX ProbeReq SA=%pM DA=%pM\n", mgmt->sa, mgmt->da); + ibss_dbg(sdata, "\tBSSID=%pM (tx_last_beacon=%d)\n", + mgmt->bssid, tx_last_beacon);

if (!tx_last_beacon && is_multicast_ether_addr(mgmt->da)) return;