From: Marek Vasut marex@denx.de
[ Upstream commit 8bad8c923f217d238ba4f1a6d19d761e53bfbd26 ]
The VSELECT pin is configured as MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT and not as a GPIO, drop the bogus sd-vsel-gpios property as the eSDHC block handles the VSELECT pin on its own.
Signed-off-by: Marek Vasut marex@denx.de Reviewed-by: Frieder Schrempf frieder.schrempf@kontron.de Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Francesco Dolcini francesco.dolcini@toradex.com --- 6.1.y is currently broken on imx8mm-verdin, because commit 5591ce0069ddda97cdbbea596bed53e698f399c2, that was backported correctly on 6.1, depends on this one.
This fixes the following error:
[ 1.735149] gpio-regulator: probe of regulator-usdhc2-vqmmc failed with error -16
v2: add missing s-o-b francesco --- arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 1 - 1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index 5b2493bb8dd9..37acaf62f5c7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -362,7 +362,6 @@ pca9450: pmic@25 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; reg = <0x25>; - sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
/* * The bootloader is expected to switch on the I2C level shifter for the TLA2024 ADC
Hello Greg,
On Wed, Jun 04, 2025 at 11:24:01PM +0200, Francesco Dolcini wrote:
From: Marek Vasut marex@denx.de
[ Upstream commit 8bad8c923f217d238ba4f1a6d19d761e53bfbd26 ]
The VSELECT pin is configured as MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT and not as a GPIO, drop the bogus sd-vsel-gpios property as the eSDHC block handles the VSELECT pin on its own.
Signed-off-by: Marek Vasut marex@denx.de Reviewed-by: Frieder Schrempf frieder.schrempf@kontron.de Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Francesco Dolcini francesco.dolcini@toradex.com
Just a short ping on this, to be sure it gets queued for the next 6.1 stable kernel
Thanks Francesco
On Mon, Jun 23, 2025 at 08:41:32AM +0200, Francesco Dolcini wrote:
Hello Greg,
On Wed, Jun 04, 2025 at 11:24:01PM +0200, Francesco Dolcini wrote:
From: Marek Vasut marex@denx.de
[ Upstream commit 8bad8c923f217d238ba4f1a6d19d761e53bfbd26 ]
The VSELECT pin is configured as MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT and not as a GPIO, drop the bogus sd-vsel-gpios property as the eSDHC block handles the VSELECT pin on its own.
Signed-off-by: Marek Vasut marex@denx.de Reviewed-by: Frieder Schrempf frieder.schrempf@kontron.de Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Francesco Dolcini francesco.dolcini@toradex.com
Just a short ping on this, to be sure it gets queued for the next 6.1 stable kernel
I think our emails got crossed in the ether, I just applied this :)
linux-stable-mirror@lists.linaro.org
-
Francesco Dolcini -
Greg Kroah-Hartman