[PATCH] crypto: hisilicon/qm - inject error before stopping queue - Linux-stable-mirror

11 Dec 2024

From: Weili Qian qianweili@huawei.com
[ Upstream commit b04f06fc0243600665b3b50253869533b7938468 ]
The master ooo cannot be completely closed when the
accelerator core reports memory error. Therefore, the driver
needs to inject the qm error to close the master ooo. Currently,
the qm error is injected after stopping queue, memory may be
released immediately after stopping queue, causing the device to
access the released memory. Therefore, error is injected to close master
ooo before stopping queue to ensure that the device does not access
the released memory.
Fixes: 6c6dd5802c2d ("crypto: hisilicon/qm - add controller reset interface")
Signed-off-by: Weili Qian qianweili@huawei.com
Signed-off-by: Herbert Xu herbert@gondor.apana.org.au
Signed-off-by: Libo Chen libo.chen.cn@windriver.com
---
 drivers/crypto/hisilicon/qm.c | 51 +++++++++++++++++------------------
 1 file changed, 24 insertions(+), 27 deletions(-)

diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index fd89918abd19..58e995db3783 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -4638,6 +4638,28 @@ static int qm_set_vf_mse(struct hisi_qm *qm, bool set)
    return -ETIMEDOUT;
 }
+static void qm_dev_ecc_mbit_handle(struct hisi_qm *qm)
+{
+	u32 nfe_enb = 0;
+
+	/* Kunpeng930 hardware automatically close master ooo when NFE occurs */
+	if (qm->ver >= QM_HW_V3)
+		return;
+
+	if (!qm->err_status.is_dev_ecc_mbit &&
+	    qm->err_status.is_qm_ecc_mbit &&
+	    qm->err_ini->close_axi_master_ooo) {
+		qm->err_ini->close_axi_master_ooo(qm);
+	} else if (qm->err_status.is_dev_ecc_mbit &&
+		   !qm->err_status.is_qm_ecc_mbit &&
+		   !qm->err_ini->close_axi_master_ooo) {
+		nfe_enb = readl(qm->io_base + QM_RAS_NFE_ENABLE);
+		writel(nfe_enb & QM_RAS_NFE_MBIT_DISABLE,
+		       qm->io_base + QM_RAS_NFE_ENABLE);
+		writel(QM_ECC_MBIT, qm->io_base + QM_ABNORMAL_INT_SET);
+	}
+}
+
 static int qm_vf_reset_prepare(struct hisi_qm *qm,
    		       enum qm_stop_reason stop_reason)
 {
@@ -4742,6 +4764,8 @@ static int qm_controller_reset_prepare(struct hisi_qm *qm)
    	return ret;
    }
+	qm_dev_ecc_mbit_handle(qm);
+
    /* PF obtains the information of VF by querying the register. */
    qm_cmd_uninit(qm);
@@ -4766,31 +4790,6 @@ static int qm_controller_reset_prepare(struct hisi_qm *qm)
    return 0;
 }
-static void qm_dev_ecc_mbit_handle(struct hisi_qm *qm)
-{
-	u32 nfe_enb = 0;
-
-	/* Kunpeng930 hardware automatically close master ooo when NFE occurs */
-	if (qm->ver >= QM_HW_V3)
-		return;
-
-	if (!qm->err_status.is_dev_ecc_mbit &&
-	    qm->err_status.is_qm_ecc_mbit &&
-	    qm->err_ini->close_axi_master_ooo) {
-
-		qm->err_ini->close_axi_master_ooo(qm);
-
-	} else if (qm->err_status.is_dev_ecc_mbit &&
-		   !qm->err_status.is_qm_ecc_mbit &&
-		   !qm->err_ini->close_axi_master_ooo) {
-
-		nfe_enb = readl(qm->io_base + QM_RAS_NFE_ENABLE);
-		writel(nfe_enb & QM_RAS_NFE_MBIT_DISABLE,
-		       qm->io_base + QM_RAS_NFE_ENABLE);
-		writel(QM_ECC_MBIT, qm->io_base + QM_ABNORMAL_INT_SET);
-	}
-}
-
 static int qm_soft_reset(struct hisi_qm *qm)
 {
    struct pci_dev *pdev = qm->pdev;
@@ -4816,8 +4815,6 @@ static int qm_soft_reset(struct hisi_qm *qm)
    	return ret;
    }
-	qm_dev_ecc_mbit_handle(qm);
-
    /* OOO register set and check */
    writel(ACC_MASTER_GLOBAL_CTRL_SHUTDOWN,
           qm->io_base + ACC_MASTER_GLOBAL_CTRL);
-- 
2.25.1



    