The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 276aae377206d60b9b7b7df4586cd9f2a813f5d0 Mon Sep 17 00:00:00 2001

From: Joakim Zhang qiangqing.zhang@nxp.com Date: Wed, 8 Sep 2021 15:43:35 +0800 Subject: [PATCH] net: stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume

commit 5f58591323bf ("net: stmmac: delete the eee_ctrl_timer after napi disabled"), this patch tries to fix system hang caused by eee_ctrl_timer, unfortunately, it only can resolve it for system reboot stress test. System hang also can be reproduced easily during system suspend/resume stess test when mount NFS on i.MX8MP EVK board.

In stmmac driver, eee feature is combined to phylink framework. When do system suspend, phylink_stop() would queue delayed work, it invokes stmmac_mac_link_down(), where to deactivate eee_ctrl_timer synchronizly. In above commit, try to fix issue by deactivating eee_ctrl_timer obviously, but it is not enough. Looking into eee_ctrl_timer expire callback stmmac_eee_ctrl_timer(), it could enable hareware eee mode again. What is unexpected is that LPI interrupt (MAC_Interrupt_Enable.LPIEN bit) is always asserted. This interrupt has chance to be issued when LPI state entry/exit from the MAC, and at that time, clock could have been already disabled. The result is that system hang when driver try to touch register from interrupt handler.

The reason why above commit can fix system hang issue in stmmac_release() is that, deactivate eee_ctrl_timer not just after napi disabled, further after irq freed.

In conclusion, hardware would generate LPI interrupt when clock has been disabled during suspend or resume, since hardware is in eee mode and LPI interrupt enabled.

Interrupts from MAC, MTL and DMA level are enabled and never been disabled when system suspend, so postpone clocks management from suspend stage to noirq suspend stage should be more safe.

Fixes: 5f58591323bf ("net: stmmac: delete the eee_ctrl_timer after napi disabled") Signed-off-by: Joakim Zhang qiangqing.zhang@nxp.com Signed-off-by: David S. Miller davem@davemloft.net

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index ece02b35a6ce..246f84fedbc8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -7118,7 +7118,6 @@ int stmmac_suspend(struct device *dev) struct net_device *ndev = dev_get_drvdata(dev); struct stmmac_priv *priv = netdev_priv(ndev); u32 chan; - int ret;

if (!ndev || !netif_running(ndev)) return 0; @@ -7150,13 +7149,6 @@ int stmmac_suspend(struct device *dev) } else { stmmac_mac_set(priv, priv->ioaddr, false); pinctrl_pm_select_sleep_state(priv->device); - /* Disable clock in case of PWM is off */ - clk_disable_unprepare(priv->plat->clk_ptp_ref); - ret = pm_runtime_force_suspend(dev); - if (ret) { - mutex_unlock(&priv->lock); - return ret; - } }

mutex_unlock(&priv->lock); @@ -7242,12 +7234,6 @@ int stmmac_resume(struct device *dev) priv->irq_wake = 0; } else { pinctrl_pm_select_default_state(priv->device); - /* enable the clk previously disabled */ - ret = pm_runtime_force_resume(dev); - if (ret) - return ret; - if (priv->plat->clk_ptp_ref) - clk_prepare_enable(priv->plat->clk_ptp_ref); /* reset the phy so that it's ready */ if (priv->mii) stmmac_mdio_reset(priv->mii); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 5ca710844cc1..4885f9ad1b1e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -9,6 +9,7 @@ *******************************************************************************/

#include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/module.h> #include <linux/io.h> #include <linux/of.h> @@ -771,9 +772,52 @@ static int __maybe_unused stmmac_runtime_resume(struct device *dev) return stmmac_bus_clks_config(priv, true); }

+static int stmmac_pltfr_noirq_suspend(struct device *dev) +{ + struct net_device *ndev = dev_get_drvdata(dev); + struct stmmac_priv *priv = netdev_priv(ndev); + int ret; + + if (!netif_running(ndev)) + return 0; + + if (!device_may_wakeup(priv->device) || !priv->plat->pmt) { + /* Disable clock in case of PWM is off */ + clk_disable_unprepare(priv->plat->clk_ptp_ref); + + ret = pm_runtime_force_suspend(dev); + if (ret) + return ret; + } + + return 0; +} + +static int stmmac_pltfr_noirq_resume(struct device *dev) +{ + struct net_device *ndev = dev_get_drvdata(dev); + struct stmmac_priv *priv = netdev_priv(ndev); + int ret; + + if (!netif_running(ndev)) + return 0; + + if (!device_may_wakeup(priv->device) || !priv->plat->pmt) { + /* enable the clk previously disabled */ + ret = pm_runtime_force_resume(dev); + if (ret) + return ret; + + clk_prepare_enable(priv->plat->clk_ptp_ref); + } + + return 0; +} + const struct dev_pm_ops stmmac_pltfr_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_suspend, stmmac_pltfr_resume) SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL) + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_noirq_suspend, stmmac_pltfr_noirq_resume) }; EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops);