[PATCH 5.15 00/17] 5.15.85-rc1 review

List overview All Threads
Download

newer

older

[PATCH v5 1/2] ceph: move mount...

[PATCH 5.10 00/18] 5.10.161-rc1...

Greg Kroah-Hartman

19 Dec 2022 19 Dec '22

7:24 p.m.

This is the start of the stable review cycle for the 5.15.85 release. There are 17 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 21 Dec 2022 18:29:31 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.85-rc1... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y and the diffstat can be found below.

thanks,

greg k-h

------------- Pseudo-Shortlog of commits:

Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.15.85-rc1

Rasmus Villemoes linux@rasmusvillemoes.dk net: loopback: use NET_NAME_PREDICTABLE for name_assign_type

Tiezhu Yang yangtiezhu@loongson.cn selftests: net: Use "grep -E" instead of "egrep"

Sungwoo Kim iam@sung-woo.kim Bluetooth: L2CAP: Fix u8 overflow

José Expósito jose.exposito89@gmail.com HID: uclogic: Add HID_QUIRK_HIDINPUT_FORCE quirk

Ferry Toth ftoth@exalondelft.nl usb: ulpi: defer ulpi_register on ulpi_read_id timeout

Shruthi Sanil shruthi.sanil@intel.com usb: dwc3: pci: Update PCIe device ID for USB3 controller on CPU sub-system for Raptor Lake

Tony Nguyen anthony.l.nguyen@intel.com igb: Initialize mailbox message for VF reset

Reka Norman rekanorman@chromium.org xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-N

Johan Hovold johan@kernel.org USB: serial: f81534: fix division by zero on line-speed change

Johan Hovold johan@kernel.org USB: serial: f81232: fix division by zero on line-speed change

Bruno Thomsen bruno.thomsen@gmail.com USB: serial: cp210x: add Kamstrup RF sniffer PIDs

Duke Xin duke_xinanwen@163.com USB: serial: option: add Quectel EM05-G modem

Szymon Heidrich szymon.heidrich@gmail.com usb: gadget: uvc: Prevent buffer overflow in setup handler

Jan Kara jack@suse.cz udf: Fix extending file within last block

Jan Kara jack@suse.cz udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size

Jan Kara jack@suse.cz udf: Fix preallocation discarding at indirect extent boundary

Jan Kara jack@suse.cz udf: Discard preallocation before extending file with a hole

-------------

Diffstat:

Show replies by date

Greg Kroah-Hartman

19 Dec 19 Dec

7:24 p.m.

New subject: [PATCH 5.15 01/17] udf: Discard preallocation before extending file with a hole

From: Jan Kara jack@suse.cz

commit 16d0556568148bdcaa45d077cac9f8f7077cf70a upstream.

When extending file with a hole, we tried to preserve existing preallocation for the file. However that is not very useful and complicates code because the previous extent may need to be rounded to block boundary as well (which we forgot to do thus causing data corruption for sequence like:

xfs_io -f -c "pwrite 0x75e63 11008" -c "truncate 0x7b24b" \ -c "truncate 0xabaa3" -c "pwrite 0xac70b 22954" \ -c "pwrite 0x93a43 11358" -c "pwrite 0xb8e65 52211" file

with 512-byte block size. Just discard preallocation before extending file to simplify things and also fix this data corruption.

CC: stable@vger.kernel.org Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/udf/inode.c | 46 ++++++++++++++++++---------------------------- 1 file changed, 18 insertions(+), 28 deletions(-)

--- a/fs/udf/inode.c +++ b/fs/udf/inode.c @@ -438,6 +438,12 @@ static int udf_get_block(struct inode *i iinfo->i_next_alloc_goal++; }

+ /* + * Block beyond EOF and prealloc extents? Just discard preallocation + * as it is not useful and complicates things. + */ + if (((loff_t)block) << inode->i_blkbits > iinfo->i_lenExtents) + udf_discard_prealloc(inode); udf_clear_extent_cache(inode); phys = inode_getblk(inode, block, &err, &new); if (!phys) @@ -487,8 +493,6 @@ static int udf_do_extend_file(struct ino uint32_t add; int count = 0, fake = !(last_ext->extLength & UDF_EXTENT_LENGTH_MASK); struct super_block *sb = inode->i_sb; - struct kernel_lb_addr prealloc_loc = {}; - uint32_t prealloc_len = 0; struct udf_inode_info *iinfo; int err;

@@ -509,19 +513,6 @@ static int udf_do_extend_file(struct ino ~(sb->s_blocksize - 1); }

- /* Last extent are just preallocated blocks? */ - if ((last_ext->extLength & UDF_EXTENT_FLAG_MASK) == - EXT_NOT_RECORDED_ALLOCATED) { - /* Save the extent so that we can reattach it to the end */ - prealloc_loc = last_ext->extLocation; - prealloc_len = last_ext->extLength; - /* Mark the extent as a hole */ - last_ext->extLength = EXT_NOT_RECORDED_NOT_ALLOCATED | - (last_ext->extLength & UDF_EXTENT_LENGTH_MASK); - last_ext->extLocation.logicalBlockNum = 0; - last_ext->extLocation.partitionReferenceNum = 0; - } - /* Can we merge with the previous extent? */ if ((last_ext->extLength & UDF_EXTENT_FLAG_MASK) == EXT_NOT_RECORDED_NOT_ALLOCATED) { @@ -549,7 +540,7 @@ static int udf_do_extend_file(struct ino * more extents, we may need to enter possible following * empty indirect extent. */ - if (new_block_bytes || prealloc_len) + if (new_block_bytes) udf_next_aext(inode, last_pos, &tmploc, &tmplen, 0); }

@@ -583,17 +574,6 @@ static int udf_do_extend_file(struct ino }

out: - /* Do we have some preallocated blocks saved? */ - if (prealloc_len) { - err = udf_add_aext(inode, last_pos, &prealloc_loc, - prealloc_len, 1); - if (err) - return err; - last_ext->extLocation = prealloc_loc; - last_ext->extLength = prealloc_len; - count++; - } - /* last_pos should point to the last written extent... */ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT) last_pos->offset -= sizeof(struct short_ad); @@ -646,8 +626,17 @@ static int udf_extend_file(struct inode else BUG();

+ /* + * When creating hole in file, just don't bother with preserving + * preallocation. It likely won't be very useful anyway. + */ + udf_discard_prealloc(inode); + etype = inode_bmap(inode, first_block, &epos, &eloc, &elen, &offset); within_final_block = (etype != -1); + /* We don't expect extents past EOF... */ + WARN_ON_ONCE(etype != -1 && + elen > ((loff_t)offset + 1) << inode->i_blkbits);

if ((!epos.bh && epos.offset == udf_file_entry_alloc_offset(inode)) || (epos.bh && epos.offset == sizeof(struct allocExtDesc))) { @@ -776,10 +765,11 @@ static sector_t inode_getblk(struct inod goto out_free; }

- /* Are we beyond EOF? */ + /* Are we beyond EOF and preallocated extent? */ if (etype == -1) { int ret; loff_t hole_len; + isBeyondEOF = true; if (count) { if (c)

Greg Kroah-Hartman

7:24 p.m.

New subject: [PATCH 5.15 02/17] udf: Fix preallocation discarding at indirect extent boundary

From: Jan Kara jack@suse.cz

commit cfe4c1b25dd6d2f056afc00b7c98bcb3dd0b1fc3 upstream.

When preallocation extent is the first one in the extent block, the code would corrupt extent tree header instead. Fix the problem and use udf_delete_aext() for deleting extent to avoid some code duplication.

CC: stable@vger.kernel.org Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/udf/truncate.c | 45 +++++++++++++-------------------------------- 1 file changed, 13 insertions(+), 32 deletions(-)

--- a/fs/udf/truncate.c +++ b/fs/udf/truncate.c @@ -120,60 +120,41 @@ void udf_truncate_tail_extent(struct ino

void udf_discard_prealloc(struct inode *inode) { - struct extent_position epos = { NULL, 0, {0, 0} }; + struct extent_position epos = {}; + struct extent_position prev_epos = {}; struct kernel_lb_addr eloc; uint32_t elen; uint64_t lbcount = 0; int8_t etype = -1, netype; - int adsize; struct udf_inode_info *iinfo = UDF_I(inode);

if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB || inode->i_size == iinfo->i_lenExtents) return;

- if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT) - adsize = sizeof(struct short_ad); - else if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG) - adsize = sizeof(struct long_ad); - else - adsize = 0; - epos.block = iinfo->i_location;

/* Find the last extent in the file */ - while ((netype = udf_next_aext(inode, &epos, &eloc, &elen, 1)) != -1) { - etype = netype; + while ((netype = udf_next_aext(inode, &epos, &eloc, &elen, 0)) != -1) { + brelse(prev_epos.bh); + prev_epos = epos; + if (prev_epos.bh) + get_bh(prev_epos.bh); + + etype = udf_next_aext(inode, &epos, &eloc, &elen, 1); lbcount += elen; } if (etype == (EXT_NOT_RECORDED_ALLOCATED >> 30)) { - epos.offset -= adsize; lbcount -= elen; - extent_trunc(inode, &epos, &eloc, etype, elen, 0); - if (!epos.bh) { - iinfo->i_lenAlloc = - epos.offset - - udf_file_entry_alloc_offset(inode); - mark_inode_dirty(inode); - } else { - struct allocExtDesc *aed = - (struct allocExtDesc *)(epos.bh->b_data); - aed->lengthAllocDescs = - cpu_to_le32(epos.offset - - sizeof(struct allocExtDesc)); - if (!UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_STRICT) || - UDF_SB(inode->i_sb)->s_udfrev >= 0x0201) - udf_update_tag(epos.bh->b_data, epos.offset); - else - udf_update_tag(epos.bh->b_data, - sizeof(struct allocExtDesc)); - mark_buffer_dirty_inode(epos.bh, inode); - } + udf_delete_aext(inode, prev_epos); + udf_free_blocks(inode->i_sb, inode, &eloc, 0, + DIV_ROUND_UP(elen, 1 << inode->i_blkbits)); } /* This inode entry is in-memory only and thus we don't have to mark * the inode dirty */ iinfo->i_lenExtents = lbcount; brelse(epos.bh); + brelse(prev_epos.bh); }

static void udf_update_alloc_ext_desc(struct inode *inode,

Greg Kroah-Hartman

7:24 p.m.

New subject: [PATCH 5.15 03/17] udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size

From: Jan Kara jack@suse.cz

commit 6ad53f0f71c52871202a7bf096feb2c59db33fc5 upstream.

If rounded block-rounded i_lenExtents matches block rounded i_size, there are no preallocation extents. Do not bother walking extent linked list.

CC: stable@vger.kernel.org Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/udf/truncate.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/udf/truncate.c +++ b/fs/udf/truncate.c @@ -127,9 +127,10 @@ void udf_discard_prealloc(struct inode * uint64_t lbcount = 0; int8_t etype = -1, netype; struct udf_inode_info *iinfo = UDF_I(inode); + int bsize = 1 << inode->i_blkbits;

if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB || - inode->i_size == iinfo->i_lenExtents) + ALIGN(inode->i_size, bsize) == ALIGN(iinfo->i_lenExtents, bsize)) return;

epos.block = iinfo->i_location;

Greg Kroah-Hartman

7:24 p.m.

New subject: [PATCH 5.15 04/17] udf: Fix extending file within last block

From: Jan Kara jack@suse.cz

commit 1f3868f06855c97a4954c99b36f3fc9eb8f60326 upstream.

When extending file within last block it can happen that the extent is already rounded to the blocksize and thus contains the offset we want to grow up to. In such case we would mistakenly expand the last extent and make it one block longer than it should be, exposing unallocated block in a file and causing data corruption. Fix the problem by properly detecting this case and bailing out.

CC: stable@vger.kernel.org Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/udf/inode.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-)

--- a/fs/udf/inode.c +++ b/fs/udf/inode.c @@ -589,13 +589,17 @@ out: static void udf_do_extend_final_block(struct inode *inode, struct extent_position *last_pos, struct kernel_long_ad *last_ext, - uint32_t final_block_len) + uint32_t new_elen) { - struct super_block *sb = inode->i_sb; uint32_t added_bytes;

- added_bytes = final_block_len - - (last_ext->extLength & (sb->s_blocksize - 1)); + /* + * Extent already large enough? It may be already rounded up to block + * size... + */ + if (new_elen <= (last_ext->extLength & UDF_EXTENT_LENGTH_MASK)) + return; + added_bytes = (last_ext->extLength & UDF_EXTENT_LENGTH_MASK) - new_elen; last_ext->extLength += added_bytes; UDF_I(inode)->i_lenExtents += added_bytes;

@@ -612,12 +616,12 @@ static int udf_extend_file(struct inode int8_t etype; struct super_block *sb = inode->i_sb; sector_t first_block = newsize >> sb->s_blocksize_bits, offset; - unsigned long partial_final_block; + loff_t new_elen; int adsize; struct udf_inode_info *iinfo = UDF_I(inode); struct kernel_long_ad extent; int err = 0; - int within_final_block; + bool within_last_ext;

if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT) adsize = sizeof(struct short_ad); @@ -633,9 +637,9 @@ static int udf_extend_file(struct inode udf_discard_prealloc(inode);

etype = inode_bmap(inode, first_block, &epos, &eloc, &elen, &offset); - within_final_block = (etype != -1); + within_last_ext = (etype != -1); /* We don't expect extents past EOF... */ - WARN_ON_ONCE(etype != -1 && + WARN_ON_ONCE(within_last_ext && elen > ((loff_t)offset + 1) << inode->i_blkbits);

if ((!epos.bh && epos.offset == udf_file_entry_alloc_offset(inode)) || @@ -652,19 +656,17 @@ static int udf_extend_file(struct inode extent.extLength |= etype << 30; }

- partial_final_block = newsize & (sb->s_blocksize - 1); + new_elen = ((loff_t)offset << inode->i_blkbits) | + (newsize & (sb->s_blocksize - 1));

/* File has extent covering the new size (could happen when extending * inside a block)? */ - if (within_final_block) { + if (within_last_ext) { /* Extending file within the last file block */ - udf_do_extend_final_block(inode, &epos, &extent, - partial_final_block); + udf_do_extend_final_block(inode, &epos, &extent, new_elen); } else { - loff_t add = ((loff_t)offset << sb->s_blocksize_bits) | - partial_final_block; - err = udf_do_extend_file(inode, &epos, &extent, add); + err = udf_do_extend_file(inode, &epos, &extent, new_elen); }

if (err < 0)

Greg Kroah-Hartman

7:24 p.m.

New subject: [PATCH 5.15 05/17] usb: gadget: uvc: Prevent buffer overflow in setup handler

From: Szymon Heidrich szymon.heidrich@gmail.com

commit 4c92670b16727365699fe4b19ed32013bab2c107 upstream.

Setup function uvc_function_setup permits control transfer requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE), data stage handler for OUT transfer uses memcpy to copy req->actual bytes to uvc_event->data.data array of size 60. This may result in an overflow of 4 bytes.

Fixes: cdda479f15cd ("USB gadget: video class function driver") Cc: stable stable@kernel.org Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Reviewed-by: Daniel Scally dan.scally@ideasonboard.com Signed-off-by: Szymon Heidrich szymon.heidrich@gmail.com Link: https://lore.kernel.org/r/20221206141301.51305-1-szymon.heidrich@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/function/f_uvc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/function/f_uvc.c +++ b/drivers/usb/gadget/function/f_uvc.c @@ -213,8 +213,9 @@ uvc_function_ep0_complete(struct usb_ep

memset(&v4l2_event, 0, sizeof(v4l2_event)); v4l2_event.type = UVC_EVENT_DATA; - uvc_event->data.length = req->actual; - memcpy(&uvc_event->data.data, req->buf, req->actual); + uvc_event->data.length = min_t(unsigned int, req->actual, + sizeof(uvc_event->data.data)); + memcpy(&uvc_event->data.data, req->buf, uvc_event->data.length); v4l2_event_queue(&uvc->vdev, &v4l2_event); } }

Greg Kroah-Hartman

7:24 p.m.

New subject: [PATCH 5.15 06/17] USB: serial: option: add Quectel EM05-G modem

From: Duke Xin duke_xinanwen@163.com

commit f0052d7a1edb3d8921b4e154aa8c46c4845b3714 upstream.

The EM05-G modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively:

"RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem

The detailed description of the USB configuration for each mode as follows:

RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0311 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0311 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Duke Xin duke_xinanwen@163.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -255,6 +255,7 @@ static void option_instat_callback(struc #define QUECTEL_PRODUCT_EP06 0x0306 #define QUECTEL_PRODUCT_EM05G 0x030a #define QUECTEL_PRODUCT_EM060K 0x030b +#define QUECTEL_PRODUCT_EM05G_SG 0x0311 #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 #define QUECTEL_PRODUCT_RM520N 0x0801 @@ -1160,6 +1161,8 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff), .driver_info = RSVD(6) | ZLP }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff), + .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },

Greg Kroah-Hartman

7:24 p.m.

New subject: [PATCH 5.15 07/17] USB: serial: cp210x: add Kamstrup RF sniffer PIDs

From: Bruno Thomsen bruno.thomsen@gmail.com

commit e88906b169ebcb8046e8f0ad76edd09ab41cfdfe upstream.

The RF sniffers are based on cp210x where the RF frontends are based on a different USB stack.

RF sniffers can analyze packets meta data including power level and perform packet injection.

Can be used to perform RF frontend self-test when connected to a concentrator, ex. arch/arm/boot/dts/imx7d-flex-concentrator.dts

Signed-off-by: Bruno Thomsen bruno.thomsen@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/cp210x.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -195,6 +195,8 @@ static const struct usb_device_id id_tab { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */ { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */ { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */ + { USB_DEVICE(0x17A8, 0x0011) }, /* Kamstrup 444 MHz RF sniffer */ + { USB_DEVICE(0x17A8, 0x0013) }, /* Kamstrup 870 MHz RF sniffer */ { USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */ { USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */ { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */

Greg Kroah-Hartman

7:24 p.m.

New subject: [PATCH 5.15 08/17] USB: serial: f81232: fix division by zero on line-speed change

From: Johan Hovold johan@kernel.org

commit a08ca6ebafe615c9028c53fc4c9e6c9b2b1f2888 upstream.

The driver leaves the line speed unchanged in case a requested speed is not supported. Make sure to handle the case where the current speed is B0 (hangup) without dividing by zero when determining the clock source.

Fixes: 268ddb5e9b62 ("USB: serial: f81232: add high baud rate support") Cc: stable@vger.kernel.org # 5.2 Cc: Ji-Ze Hong (Peter Hong) hpeter@gmail.com Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/f81232.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -130,9 +130,6 @@ static u8 const clock_table[] = { F81232

static int calc_baud_divisor(speed_t baudrate, speed_t clockrate) { - if (!baudrate) - return 0; - return DIV_ROUND_CLOSEST(clockrate, baudrate); }

@@ -519,9 +516,14 @@ static void f81232_set_baudrate(struct t speed_t baud_list[] = { baudrate, old_baudrate, F81232_DEF_BAUDRATE };

for (i = 0; i < ARRAY_SIZE(baud_list); ++i) { - idx = f81232_find_clk(baud_list[i]); + baudrate = baud_list[i]; + if (baudrate == 0) { + tty_encode_baud_rate(tty, 0, 0); + return; + } + + idx = f81232_find_clk(baudrate); if (idx >= 0) { - baudrate = baud_list[i]; tty_encode_baud_rate(tty, baudrate, baudrate); break; }

Greg Kroah-Hartman

7:24 p.m.

New subject: [PATCH 5.15 09/17] USB: serial: f81534: fix division by zero on line-speed change

From: Johan Hovold johan@kernel.org

commit 188c9c2e0c7f4ae864113f80c40bafb394062271 upstream.

Fixes: 3aacac02f385 ("USB: serial: f81534: add high baud rate support") Cc: stable@vger.kernel.org # 4.16 Cc: Ji-Ze Hong (Peter Hong) hpeter@gmail.com Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/f81534.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/usb/serial/f81534.c +++ b/drivers/usb/serial/f81534.c @@ -536,9 +536,6 @@ static int f81534_submit_writer(struct u

static u32 f81534_calc_baud_divisor(u32 baudrate, u32 clockrate) { - if (!baudrate) - return 0; - /* Round to nearest divisor */ return DIV_ROUND_CLOSEST(clockrate, baudrate); } @@ -568,9 +565,14 @@ static int f81534_set_port_config(struct u32 baud_list[] = {baudrate, old_baudrate, F81534_DEFAULT_BAUD_RATE};

for (i = 0; i < ARRAY_SIZE(baud_list); ++i) { - idx = f81534_find_clk(baud_list[i]); + baudrate = baud_list[i]; + if (baudrate == 0) { + tty_encode_baud_rate(tty, 0, 0); + return 0; + } + + idx = f81534_find_clk(baudrate); if (idx >= 0) { - baudrate = baud_list[i]; tty_encode_baud_rate(tty, baudrate, baudrate); break; }

Greg Kroah-Hartman

7:24 p.m.

New subject: [PATCH 5.15 10/17] xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-N

From: Reka Norman rekanorman@chromium.org

commit fed70b61ef2c0aed54456db3d485b215f6cc3209 upstream.

ADL-N systems have the same issue as ADL-P, where a large boot firmware delay is seen if USB ports are left in U3 at shutdown. So apply the XHCI_RESET_TO_DEFAULT quirk to ADL-N as well.

This patch depends on commit 34cd2db408d5 ("xhci: Add quirk to reset host back to default state at shutdown").

The issue it fixes is a ~20s boot time delay when booting from S5. It affects ADL-N devices, and ADL-N support was added starting from v5.16.

Cc: stable@vger.kernel.org Signed-off-by: Reka Norman rekanorman@chromium.org Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20221130091944.2171610-3-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -59,6 +59,7 @@ #define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13 #define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI 0x51ed +#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI 0x54ed

#define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 @@ -247,7 +248,8 @@ static void xhci_pci_quirks(struct devic xhci->quirks |= XHCI_MISSING_CAS;

if (pdev->vendor == PCI_VENDOR_ID_INTEL && - pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI) + (pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI)) xhci->quirks |= XHCI_RESET_TO_DEFAULT;

if (pdev->vendor == PCI_VENDOR_ID_INTEL &&

Greg Kroah-Hartman

7:24 p.m.

New subject: [PATCH 5.15 11/17] igb: Initialize mailbox message for VF reset

From: Tony Nguyen anthony.l.nguyen@intel.com

commit de5dc44370fbd6b46bd7f1a1e00369be54a041c8 upstream.

When a MAC address is not assigned to the VF, that portion of the message sent to the VF is not set. The memory, however, is allocated from the stack meaning that information may be leaked to the VM. Initialize the message buffer to 0 so that no information is passed to the VM in this case.

Fixes: 6ddbc4cf1f4d ("igb: Indicate failure on vf reset for empty mac address") Reported-by: Akihiko Odaki akihiko.odaki@daynix.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Reviewed-by: Akihiko Odaki akihiko.odaki@daynix.com Reviewed-by: Leon Romanovsky leonro@nvidia.com Link: https://lore.kernel.org/r/20221212190031.3983342-1-anthony.l.nguyen@intel.co... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/intel/igb/igb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -7410,7 +7410,7 @@ static void igb_vf_reset_msg(struct igb_ { struct e1000_hw *hw = &adapter->hw; unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses; - u32 reg, msgbuf[3]; + u32 reg, msgbuf[3] = {}; u8 *addr = (u8 *)(&msgbuf[1]);

/* process all the same items cleared in a function level reset */

Greg Kroah-Hartman

7:24 p.m.

New subject: [PATCH 5.15 12/17] usb: dwc3: pci: Update PCIe device ID for USB3 controller on CPU sub-system for Raptor Lake

From: Shruthi Sanil shruthi.sanil@intel.com

commit f05f80f217bf52443a2582bca19fd78188333f25 upstream.

The device ID 0xa70e is defined for the USB3 device controller in the CPU sub-system of Raptor Lake platform. Hence updating the ID accordingly.

Fixes: bad0d1d726ac ("usb: dwc3: pci: Add support for Intel Raptor Lake") Cc: stable stable@kernel.org Reviewed-by: Heikki Krogerus heikki.krogerus@linux.intel.com Signed-off-by: Shruthi Sanil shruthi.sanil@intel.com Link: https://lore.kernel.org/r/20221125105327.27945-1-shruthi.sanil@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/dwc3/dwc3-pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -43,7 +43,7 @@ #define PCI_DEVICE_ID_INTEL_ADLP 0x51ee #define PCI_DEVICE_ID_INTEL_ADLM 0x54ee #define PCI_DEVICE_ID_INTEL_ADLS 0x7ae1 -#define PCI_DEVICE_ID_INTEL_RPL 0x460e +#define PCI_DEVICE_ID_INTEL_RPL 0xa70e #define PCI_DEVICE_ID_INTEL_RPLS 0x7a61 #define PCI_DEVICE_ID_INTEL_MTLP 0x7ec1 #define PCI_DEVICE_ID_INTEL_MTL 0x7e7e

Greg Kroah-Hartman

7:24 p.m.

New subject: [PATCH 5.15 13/17] usb: ulpi: defer ulpi_register on ulpi_read_id timeout

From: Ferry Toth ftoth@exalondelft.nl

commit 8a7b31d545d3a15f0e6f5984ae16f0ca4fd76aac upstream.

Since commit 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present") Dual Role support on Intel Merrifield platform broke due to rearranging the call to dwc3_get_extcon().

It appears to be caused by ulpi_read_id() on the first test write failing with -ETIMEDOUT. Currently ulpi_read_id() expects to discover the phy via DT when the test write fails and returns 0 in that case, even if DT does not provide the phy. As a result usb probe completes without phy.

Make ulpi_read_id() return -ETIMEDOUT to its user if the first test write fails. The user should then handle it appropriately. A follow up patch will make dwc3_core_init() set -EPROBE_DEFER in this case and bail out.

Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus heikki.krogerus@linux.intel.com Signed-off-by: Ferry Toth ftoth@exalondelft.nl Link: https://lore.kernel.org/r/20221205201527.13525-2-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/common/ulpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/common/ulpi.c +++ b/drivers/usb/common/ulpi.c @@ -206,7 +206,7 @@ static int ulpi_read_id(struct ulpi *ulp /* Test the interface */ ret = ulpi_write(ulpi, ULPI_SCRATCH, 0xaa); if (ret < 0) - goto err; + return ret;

ret = ulpi_read(ulpi, ULPI_SCRATCH); if (ret < 0)

Greg Kroah-Hartman

7:25 p.m.

New subject: [PATCH 5.15 14/17] HID: uclogic: Add HID_QUIRK_HIDINPUT_FORCE quirk

From: José Expósito jose.exposito89@gmail.com

[ Upstream commit 3405a4beaaa852f3ed2a5eb3b5149932d5c3779b ]

Commit f7d8e387d9ae ("HID: uclogic: Switch to Digitizer usage for styluses") changed the usage used in UCLogic from "Pen" to "Digitizer".

However, the IS_INPUT_APPLICATION() macro evaluates to false for HID_DG_DIGITIZER causing issues with the XP-Pen Star G640 tablet.

Add the HID_QUIRK_HIDINPUT_FORCE quirk to bypass the IS_INPUT_APPLICATION() check.

Reported-by: Torge Matthies openglfreak@googlemail.com Reported-by: Alexander Zhang alex@alexyzhang.dev Tested-by: Alexander Zhang alex@alexyzhang.dev Signed-off-by: José Expósito jose.exposito89@gmail.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-uclogic-core.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c index d8ab0139e5cd..785d81d61ba4 100644 --- a/drivers/hid/hid-uclogic-core.c +++ b/drivers/hid/hid-uclogic-core.c @@ -172,6 +172,7 @@ static int uclogic_probe(struct hid_device *hdev, * than the pen, so use QUIRK_MULTI_INPUT for all tablets. */ hdev->quirks |= HID_QUIRK_MULTI_INPUT; + hdev->quirks |= HID_QUIRK_HIDINPUT_FORCE;

/* Allocate and assign driver data */ drvdata = devm_kzalloc(&hdev->dev, sizeof(*drvdata), GFP_KERNEL);

-- 2.35.1

Greg Kroah-Hartman

7:25 p.m.

New subject: [PATCH 5.15 15/17] Bluetooth: L2CAP: Fix u8 overflow

From: Sungwoo Kim iam@sung-woo.kim

[ Upstream commit bcd70260ef56e0aee8a4fc6cd214a419900b0765 ]

By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP

Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...)

...

invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............

...

invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@.....

...

invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@.......

...

invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828

...

invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@...

Signed-off-by: Sungwoo Kim iam@sung-woo.kim Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/l2cap_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 761efd7da514..e15fcf72a342 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -4453,7 +4453,8 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,

chan->ident = cmd->ident; l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, len, rsp); - chan->num_conf_rsp++; + if (chan->num_conf_rsp < L2CAP_CONF_MAX_CONF_RSP) + chan->num_conf_rsp++;

/* Reset config buffer. */ chan->conf_len = 0;

-- 2.35.1

Greg Kroah-Hartman

7:25 p.m.

New subject: [PATCH 5.15 16/17] selftests: net: Use "grep -E" instead of "egrep"

From: Tiezhu Yang yangtiezhu@loongson.cn

[ Upstream commit 6a30d3e3491dc562384e9f15b201a8a25b57439f ]

The latest version of grep claims the egrep is now obsolete so the build now contains warnings that look like: egrep: warning: egrep is obsolescent; using grep -E fix this using "grep -E" instead.

sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/net`

Here are the steps to install the latest grep:

wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz tar xf grep-3.8.tar.gz cd grep-3.8 && ./configure && make sudo make install export PATH=/usr/local/bin:$PATH

Signed-off-by: Tiezhu Yang yangtiezhu@loongson.cn Link: https://lore.kernel.org/r/1669864248-829-1-git-send-email-yangtiezhu@loongso... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/net/toeplitz.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/toeplitz.sh b/tools/testing/selftests/net/toeplitz.sh index 0a49907cd4fe..da5bfd834eff 100755 --- a/tools/testing/selftests/net/toeplitz.sh +++ b/tools/testing/selftests/net/toeplitz.sh @@ -32,7 +32,7 @@ DEV="eth0" # This is determined by reading the RSS indirection table using ethtool. get_rss_cfg_num_rxqs() { echo $(ethtool -x "${DEV}" | - egrep [[:space:]]+[0-9]+:[[:space:]]+ | + grep -E [[:space:]]+[0-9]+:[[:space:]]+ | cut -d: -f2- | awk '{$1=$1};1' | tr ' ' '\n' |

-- 2.35.1

Greg Kroah-Hartman

7:25 p.m.

New subject: [PATCH 5.15 17/17] net: loopback: use NET_NAME_PREDICTABLE for name_assign_type

From: Rasmus Villemoes linux@rasmusvillemoes.dk

[ Upstream commit 31d929de5a112ee1b977a89c57de74710894bbbf ]

When the name_assign_type attribute was introduced (commit 685343fc3ba6, "net: add name_assign_type netdev attribute"), the loopback device was explicitly mentioned as one which would make use of NET_NAME_PREDICTABLE:

The name_assign_type attribute gives hints where the interface name of a given net-device comes from. These values are currently defined: ... NET_NAME_PREDICTABLE: The ifname has been assigned by the kernel in a predictable way that is guaranteed to avoid reuse and always be the same for a given device. Examples include statically created devices like the loopback device [...]

Switch to that so that reading /sys/class/net/lo/name_assign_type produces something sensible instead of returning -EINVAL.

Signed-off-by: Rasmus Villemoes linux@rasmusvillemoes.dk Reviewed-by: Jacob Keller jacob.e.keller@intel.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/loopback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index a1c77cc00416..498e5c8013ef 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -208,7 +208,7 @@ static __net_init int loopback_net_init(struct net *net) int err;

err = -ENOMEM; - dev = alloc_netdev(0, "lo", NET_NAME_UNKNOWN, loopback_setup); + dev = alloc_netdev(0, "lo", NET_NAME_PREDICTABLE, loopback_setup); if (!dev) goto out;

-- 2.35.1

Florian Fainelli

11:39 p.m.

On 12/19/22 11:24, Greg Kroah-Hartman wrote:

...

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:

Tested-by: Florian Fainelli f.fainelli@gmail.com

-- Florian

Shuah Khan

20 Dec 20 Dec

12:19 a.m.

On 12/19/22 12:24, Greg Kroah-Hartman wrote:

...

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan skhan@linuxfoundation.org

thanks, -- Shuah

Bagas Sanjaya

2:39 a.m.

On Mon, Dec 19, 2022 at 08:24:46PM +0100, Greg Kroah-Hartman wrote:

...

Successfully cross-compiled for arm64 (bcm2711_defconfig, GCC 10.2.0) and powerpc (ps3_defconfig, GCC 12.2.0).

Tested-by: Bagas Sanjaya bagasdotme@gmail.com

-- An old man doll... just what I always wanted! - Clara

Naresh Kamboju

6:48 a.m.

On Tue, 20 Dec 2022 at 00:57, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:

...

Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing lkft@linaro.org

## Build * kernel: 5.15.85-rc1 * git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc * git branch: linux-5.15.y * git commit: bef75c6188c78b9ddf305681393ec04bd7d2ad30 * git describe: v5.15.84-18-gbef75c6188c7 * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15....

## Test Regressions (compared to v5.15.84)

## Metric Regressions (compared to v5.15.84)

## Test Fixes (compared to v5.15.84)

## Metric Fixes (compared to v5.15.84)

## Test result summary total: 139603, pass: 121329, fail: 2908, skip: 14952, xfail: 414

## Build Summary * arc: 5 total, 5 passed, 0 failed * arm: 151 total, 148 passed, 3 failed * arm64: 49 total, 47 passed, 2 failed * i386: 39 total, 35 passed, 4 failed * mips: 31 total, 29 passed, 2 failed * parisc: 8 total, 8 passed, 0 failed * powerpc: 34 total, 32 passed, 2 failed * riscv: 14 total, 14 passed, 0 failed * s390: 16 total, 14 passed, 2 failed * sh: 14 total, 12 passed, 2 failed * sparc: 8 total, 8 passed, 0 failed * x86_64: 42 total, 40 passed, 2 failed

## Test suites summary * boot * fwts * igt-gpu-tools * kselftest-android * kselftest-arm64 * kselftest-arm64/arm64.btitest.bti_c_func * kselftest-arm64/arm64.btitest.bti_j_func * kselftest-arm64/arm64.btitest.bti_jc_func * kselftest-arm64/arm64.btitest.bti_none_func * kselftest-arm64/arm64.btitest.nohint_func * kselftest-arm64/arm64.btitest.paciasp_func * kselftest-arm64/arm64.nobtitest.bti_c_func * kselftest-arm64/arm64.nobtitest.bti_j_func * kselftest-arm64/arm64.nobtitest.bti_jc_func * kselftest-arm64/arm64.nobtitest.bti_none_func * kselftest-arm64/arm64.nobtitest.nohint_func * kselftest-arm64/arm64.nobtitest.paciasp_func * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-drivers-dma-buf * kselftest-efivarfs * kselftest-filesystems * kselftest-filesystems-binderfs * kselftest-firmware * kselftest-fpu * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-livepatch * kselftest-membarrier * kselftest-memfd * kselftest-memory-hotplug * kselftest-mincore * kselftest-mount * kselftest-mqueue * kselftest-net * kselftest-net-forwarding * kselftest-net-mptcp * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-splice * kselftest-static_keys * kselftest-sync * kselftest-sysctl * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-vm * kselftest-x86 * kselftest-zram * kunit * kvm-unit-tests * libgpiod * libhugetlbfs * log-parser-boot * log-parser-test * ltp-cap_bounds * ltp-commands * ltp-containers * ltp-controllers * ltp-cpuhotplug * ltp-crypto * ltp-cve * ltp-dio * ltp-fcntl-locktests * ltp-filecaps * ltp-fs * ltp-fs_bind * ltp-fs_perms_simple * ltp-fsx * ltp-hugetlb * ltp-io * ltp-ipc * ltp-math * ltp-mm * ltp-nptl * ltp-open-posix-tests * ltp-pty * ltp-sched * ltp-securebits * ltp-smoke * ltp-syscalls * ltp-tracing * network-basic-tests * perf * perf/Zstd-perf.data-compression * rcutorture * v4l2-compliance * vdso

-- Linaro LKFT https://lkft.linaro.org

Sudip Mukherjee (Codethink)

11:20 a.m.

Hi Greg,

On Mon, Dec 19, 2022 at 08:24:46PM +0100, Greg Kroah-Hartman wrote:

...

Build test (gcc version 12.2.1 20221127): mips: 62 configs -> no failure arm: 99 configs -> no failure arm64: 3 configs -> no failure x86_64: 4 configs -> no failure alpha allmodconfig -> no failure csky allmodconfig -> no failure powerpc allmodconfig -> no failure riscv allmodconfig -> no failure s390 allmodconfig -> no failure xtensa allmodconfig -> no failure

Boot test: x86_64: Booted on my test laptop. No regression. x86_64: Booted on qemu. No regression. [1] arm64: Booted on rpi4b (4GB model). No regression. [2] mips: Booted on ci20 board. No regression. [3]

[1]. https://openqa.qa.codethink.co.uk/tests/2422 [2]. https://openqa.qa.codethink.co.uk/tests/2425 [3]. https://openqa.qa.codethink.co.uk/tests/2428

Tested-by: Sudip Mukherjee sudip.mukherjee@codethink.co.uk

-- Regards Sudip

Guenter Roeck

2:48 p.m.

On Mon, Dec 19, 2022 at 08:24:46PM +0100, Greg Kroah-Hartman wrote:

...

Build results: total: 155 pass: 155 fail: 0 Qemu test results: total: 489 pass: 489 fail: 0

Tested-by: Guenter Roeck linux@roeck-us.net

Guenter

Guenter Roeck

3:33 p.m.

On Tue, Dec 20, 2022 at 06:48:37AM -0800, Guenter Roeck wrote:

...

Wrong results, sorry. I'll resend once I have the real ones.

Guenter

Guenter Roeck

21 Dec 21 Dec

1:08 a.m.

On Tue, Dec 20, 2022 at 07:33:29AM -0800, Guenter Roeck wrote:

...

Real test results:

Build results: total: 160 pass: 160 fail: 0 Qemu test results: total: 489 pass: 487 fail: 2 Failed tests: arm:xilinx-zynq-a9:multi_v7_defconfig:usb0:mem128:net,default:zynq-zc702:rootfs arm:xilinx-zynq-a9:multi_v7_defconfig:usb0:mem128:zynq-zed:rootfs

Guenter

Slade Watkins

1:18 a.m.

On Mon, Dec 19, 2022 at 2:27 PM Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:

...

Hi, Compiled and tested on my x86_64 test systems, no errors or regressions to report.

Tested-by: Slade Watkins srw@sladewatkins.net

-- Slade

Ron Economos

5:17 a.m.

On 12/19/22 11:24 AM, Greg Kroah-Hartman wrote:

...

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos re@w6rz.net

751

days inactive

753

days old

linux-stable-mirror@lists.linaro.org

27 comments

participants

tags (0)

participants (9)

Bagas Sanjaya
Florian Fainelli
Greg Kroah-Hartman
Guenter Roeck
Naresh Kamboju
Ron Economos
Shuah Khan
Slade Watkins
Sudip Mukherjee (Codethink)