This is a note to let you know that I've just added the patch titled

iio: adc: ti-ads8344: Fix channel selection

to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From bcfa1e253d2e329e1ebab5c89f3c73f6dd17606c Mon Sep 17 00:00:00 2001

From: Gregory CLEMENT gregory.clement@bootlin.com Date: Thu, 30 Apr 2020 15:05:47 +0200 Subject: iio: adc: ti-ads8344: Fix channel selection

During initial submission the selection of the channel was done using the scan_index member of the iio_chan_spec structure. It was an abuse because this member is supposed to be used with a buffer so it was removed.

However there was still the need to be able to known how to select a channel, the correct member to store this information is address.

Thanks to this it is possible to select any other channel than the channel 0.

Fixes: 8dd2d7c0fed7 ("iio: adc: Add driver for the TI ADS8344 A/DC chips") Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com --- drivers/iio/adc/ti-ads8344.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/ti-ads8344.c b/drivers/iio/adc/ti-ads8344.c index abe4b56c847c..8a8792010c20 100644 --- a/drivers/iio/adc/ti-ads8344.c +++ b/drivers/iio/adc/ti-ads8344.c @@ -32,16 +32,17 @@ struct ads8344 { u8 rx_buf[3]; };

-#define ADS8344_VOLTAGE_CHANNEL(chan, si) \ +#define ADS8344_VOLTAGE_CHANNEL(chan, addr) \ { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ .channel = chan, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .address = addr, \ }

-#define ADS8344_VOLTAGE_CHANNEL_DIFF(chan1, chan2, si) \ +#define ADS8344_VOLTAGE_CHANNEL_DIFF(chan1, chan2, addr) \ { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ @@ -50,6 +51,7 @@ struct ads8344 { .differential = 1, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .address = addr, \ }

static const struct iio_chan_spec ads8344_channels[] = { @@ -105,7 +107,7 @@ static int ads8344_read_raw(struct iio_dev *iio, switch (mask) { case IIO_CHAN_INFO_RAW: mutex_lock(&adc->lock); - *value = ads8344_adc_conversion(adc, channel->scan_index, + *value = ads8344_adc_conversion(adc, channel->address, channel->differential); mutex_unlock(&adc->lock); if (*value < 0)