commit c32dfec6c1c36bbbcd5d33e949d99aeb215877ec upstream.

Some CP2102 do not support event-insertion mode but return no error when attempting to enable it.

This means that any event escape characters in the input stream will not be escaped by the device and consequently regular data may be interpreted as escape sequences and be removed from the stream by the driver.

The reporter's device has batch number DCL00X etched into it and as discovered by the SHA2017 Badge team, counterfeit devices with that marking can be detected by sending malformed vendor requests. [1][2]

Tests confirm that the possibly counterfeit CP2102 returns a single byte in response to a malformed two-byte part-number request, while an original CP2102 returns two bytes. Assume that every CP2102 that behaves this way also does not support event-insertion mode (e.g. cannot report parity errors).

[1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418 [2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#commen...

Reported-by: Malte Di Donato malte@neo-soft.org Tested-by: Malte Di Donato malte@neo-soft.org Fixes: a7207e9835a4 ("USB: serial: cp210x: add support for line-status events") Link: https://lore.kernel.org/r/20210922113100.20888-1-johan@kernel.org Cc: stable@vger.kernel.org # 5.9 Signed-off-by: Johan Hovold johan@kernel.org [ johan: backport to 5.10; adjust context, add quirk helper ] Signed-off-by: Johan Hovold johan@kernel.org --- drivers/usb/serial/cp210x.c | 46 +++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 329fc25f78a4..c30c84a7775b 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -260,6 +260,7 @@ struct cp210x_serial_private { speed_t min_speed; speed_t max_speed; bool use_actual_rate; + bool no_event_mode; };

enum cp210x_event_state { @@ -1331,12 +1332,16 @@ static void cp210x_change_speed(struct tty_struct *tty,

static void cp210x_enable_event_mode(struct usb_serial_port *port) { + struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); int ret;

if (port_priv->event_mode) return;

+ if (priv->no_event_mode) + return; + port_priv->event_state = ES_DATA; port_priv->event_mode = true;

@@ -2086,6 +2091,46 @@ static void cp210x_init_max_speed(struct usb_serial *serial) priv->use_actual_rate = use_actual_rate; }

+static void cp2102_determine_quirks(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + u8 *buf; + int ret; + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return; + /* + * Some (possibly counterfeit) CP2102 do not support event-insertion + * mode and respond differently to malformed vendor requests. + * Specifically, they return one instead of two bytes when sent a + * two-byte part-number request. + */ + ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + CP210X_VENDOR_SPECIFIC, REQTYPE_DEVICE_TO_HOST, + CP210X_GET_PARTNUM, 0, buf, 2, USB_CTRL_GET_TIMEOUT); + if (ret == 1) { + dev_dbg(&serial->interface->dev, + "device does not support event-insertion mode\n"); + priv->no_event_mode = true; + } + + kfree(buf); +} + +static void cp210x_determine_quirks(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + + switch (priv->partnum) { + case CP210X_PARTNUM_CP2102: + cp2102_determine_quirks(serial); + break; + default: + break; + } +} + static int cp210x_attach(struct usb_serial *serial) { int result; @@ -2106,6 +2151,7 @@ static int cp210x_attach(struct usb_serial *serial)

usb_set_serial_data(serial, priv);

+ cp210x_determine_quirks(serial); cp210x_init_max_speed(serial);

result = cp210x_gpio_init(serial);