From: Michal Vrastil michal.vrastil@hidglobal.com

This reverts commit ec6ce7075ef879b91a8710829016005dc8170f17.

Fix installation of WinUSB driver using OS descriptors. Without the fix the drivers are not installed correctly and the property 'DeviceInterfaceGUID' is missing on host side.

The original change was based on the assumption that the interface number is in the high byte of wValue but it is in the low byte, instead. Unfortunately, the fix is based on MS documentation which is also wrong.

The actual USB request for OS descriptors (using USB analyzer) looks like:

Offset 0 1 2 3 4 5 6 7 0x000 C1 A1 02 00 05 00 0A 00

C1: bmRequestType (device to host, vendor, interface) A1: nas magic number 0002: wValue (2: nas interface) 0005: wIndex (5: get extended property i.e. nas interface GUID) 008E: wLength (142)

The fix was tested on Windows 10 and Windows 11.

Cc: stable@vger.kernel.org Fixes: ec6ce7075ef8 ("usb: gadget: composite: fix OS descriptors w_value logic") Signed-off-by: Michal Vrastil michal.vrastil@hidglobal.com Signed-off-by: Elson Roy Serrao quic_eserrao@quicinc.com --- Changes in v2: - Added comments to explain wValue byte ordering discrepancy in MS OS Descriptor Spec. - Link to v1: https://lore.kernel.org/all/9918669c-3bfd-4d42-93c4-218e9364b7cc@quicinc.com...

drivers/usb/gadget/composite.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 0e151b54aae8..9225c21d1184 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -2111,8 +2111,20 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) memset(buf, 0, w_length); buf[5] = 0x01; switch (ctrl->bRequestType & USB_RECIP_MASK) { + /* + * The Microsoft CompatID OS Descriptor Spec(w_index = 0x4) and + * Extended Prop OS Desc Spec(w_index = 0x5) state that the + * HighByte of wValue is the InterfaceNumber and the LowByte is + * the PageNumber. This high/low byte ordering is incorrectly + * documented in the Spec. USB analyzer output on the below + * request packets show the high/low byte inverted i.e LowByte + * is the InterfaceNumber and the HighByte is the PageNumber. + * Since we dont support >64KB CompatID/ExtendedProp descriptors, + * PageNumber is set to 0. Hence verify that the HighByte is 0 + * for below two cases. + */ case USB_RECIP_DEVICE: - if (w_index != 0x4 || (w_value & 0xff)) + if (w_index != 0x4 || (w_value >> 8)) break; buf[6] = w_index; /* Number of ext compat interfaces */ @@ -2128,9 +2140,9 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) } break; case USB_RECIP_INTERFACE: - if (w_index != 0x5 || (w_value & 0xff)) + if (w_index != 0x5 || (w_value >> 8)) break; - interface = w_value >> 8; + interface = w_value & 0xFF; if (interface >= MAX_CONFIG_INTERFACES || !os_desc_cfg->interface[interface]) break;