Registers r7 is removed in clobber list, so compiler may choose r7 for local variables usage, while r7 will be actually updated by the inline asm code. This caused the runtime behavior wrong. While those kind of reserved registers cannot be set to clobber list because of error like "inline asm clobber list contains reserved registers". Explicitly reserve r7 by adding attribute no-omit-frame-pointer for needed function, then in T32 asm code r7 is used as a frame pointer and is not available for use as a general-purpose register. Note that "no-omit-frame-pointer" will make the code size a little bigger to store the stack frame pointer. So limited to needed functions can have the less impact than the full source file.
Fixes: dd12e97f3c72 ("ARM: kprobes: treat R7 as the frame pointer register in Thumb2 builds") Signed-off-by: Maria Yu quic_aiquny@quicinc.com Cc: stable@vger.kernel.org --- arch/arm/probes/kprobes/actions-thumb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/probes/kprobes/actions-thumb.c b/arch/arm/probes/kprobes/actions-thumb.c index 51624fc263fc..c2fdaf9f6dba 100644 --- a/arch/arm/probes/kprobes/actions-thumb.c +++ b/arch/arm/probes/kprobes/actions-thumb.c @@ -438,7 +438,7 @@ t16_simulate_branch(probes_opcode_t insn, regs->ARM_pc = pc + (offset * 2); }
-static unsigned long __kprobes +static unsigned long __kprobes __attribute__((optimize("no-omit-frame-pointer"))) t16_emulate_loregs(probes_opcode_t insn, struct arch_probes_insn *asi, struct pt_regs *regs) { @@ -521,7 +521,7 @@ t16_decode_hiregs(probes_opcode_t insn, struct arch_probes_insn *asi, return INSN_GOOD; }
-static void __kprobes +static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) t16_emulate_push(probes_opcode_t insn, struct arch_probes_insn *asi, struct pt_regs *regs) { @@ -557,7 +557,7 @@ t16_decode_push(probes_opcode_t insn, struct arch_probes_insn *asi, return INSN_GOOD; }
-static void __kprobes +static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) t16_emulate_pop_nopc(probes_opcode_t insn, struct arch_probes_insn *asi, struct pt_regs *regs) { @@ -576,7 +576,7 @@ t16_emulate_pop_nopc(probes_opcode_t insn, ); }
-static void __kprobes +static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) t16_emulate_pop_pc(probes_opcode_t insn, struct arch_probes_insn *asi, struct pt_regs *regs) {
base-commit: 9bacdd8996c77c42ca004440be610692275ff9d0
On Wed, 15 Nov 2023 at 19:58, Maria Yu quic_aiquny@quicinc.com wrote:
Registers r7 is removed in clobber list, so compiler may choose r7 for local variables usage, while r7 will be actually updated by the inline asm code. This caused the runtime behavior wrong. While those kind of reserved registers cannot be set to clobber list because of error like "inline asm clobber list contains reserved registers". Explicitly reserve r7 by adding attribute no-omit-frame-pointer for needed function, then in T32 asm code r7 is used as a frame pointer and is not available for use as a general-purpose register. Note that "no-omit-frame-pointer" will make the code size a little bigger to store the stack frame pointer. So limited to needed functions can have the less impact than the full source file.
Fixes: dd12e97f3c72 ("ARM: kprobes: treat R7 as the frame pointer register in Thumb2 builds") Signed-off-by: Maria Yu quic_aiquny@quicinc.com Cc: stable@vger.kernel.org
Reviewed-by: Ard Biesheuvel ardb@kernel.org
arch/arm/probes/kprobes/actions-thumb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/probes/kprobes/actions-thumb.c b/arch/arm/probes/kprobes/actions-thumb.c index 51624fc263fc..c2fdaf9f6dba 100644 --- a/arch/arm/probes/kprobes/actions-thumb.c +++ b/arch/arm/probes/kprobes/actions-thumb.c @@ -438,7 +438,7 @@ t16_simulate_branch(probes_opcode_t insn, regs->ARM_pc = pc + (offset * 2); }
-static unsigned long __kprobes +static unsigned long __kprobes __attribute__((optimize("no-omit-frame-pointer"))) t16_emulate_loregs(probes_opcode_t insn, struct arch_probes_insn *asi, struct pt_regs *regs) { @@ -521,7 +521,7 @@ t16_decode_hiregs(probes_opcode_t insn, struct arch_probes_insn *asi, return INSN_GOOD; }
-static void __kprobes +static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) t16_emulate_push(probes_opcode_t insn, struct arch_probes_insn *asi, struct pt_regs *regs) { @@ -557,7 +557,7 @@ t16_decode_push(probes_opcode_t insn, struct arch_probes_insn *asi, return INSN_GOOD; }
-static void __kprobes +static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) t16_emulate_pop_nopc(probes_opcode_t insn, struct arch_probes_insn *asi, struct pt_regs *regs) { @@ -576,7 +576,7 @@ t16_emulate_pop_nopc(probes_opcode_t insn, ); }
-static void __kprobes +static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) t16_emulate_pop_pc(probes_opcode_t insn, struct arch_probes_insn *asi, struct pt_regs *regs) {
base-commit: 9bacdd8996c77c42ca004440be610692275ff9d0
2.17.1
On Wed, Nov 15, 2023 at 05:58:30PM +0800, Maria Yu wrote:
Registers r7 is removed in clobber list, so compiler may choose r7 for local variables usage, while r7 will be actually updated by the inline asm code. This caused the runtime behavior wrong. While those kind of reserved registers cannot be set to clobber list because of error like "inline asm clobber list contains reserved registers". Explicitly reserve r7 by adding attribute no-omit-frame-pointer for needed function, then in T32 asm code r7 is used as a frame pointer and is not available for use as a general-purpose register. Note that "no-omit-frame-pointer" will make the code size a little bigger to store the stack frame pointer. So limited to needed functions can have the less impact than the full source file.
Fixes: dd12e97f3c72 ("ARM: kprobes: treat R7 as the frame pointer register in Thumb2 builds") Signed-off-by: Maria Yu quic_aiquny@quicinc.com Cc: stable@vger.kernel.org
This causes warnings with clang:
arch/arm/probes/kprobes/actions-thumb.c:441:47: warning: unknown attribute 'optimize' ignored [-Wunknown-attributes] 441 | static unsigned long __kprobes __attribute__((optimize("no-omit-frame-pointer"))) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/probes/kprobes/actions-thumb.c:524:38: warning: unknown attribute 'optimize' ignored [-Wunknown-attributes] 524 | static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/probes/kprobes/actions-thumb.c:560:38: warning: unknown attribute 'optimize' ignored [-Wunknown-attributes] 560 | static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/probes/kprobes/actions-thumb.c:579:38: warning: unknown attribute 'optimize' ignored [-Wunknown-attributes] 579 | static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 4 warnings generated.
Furthermore, as far as I am aware, the optimize attribute has other issues so its use is discouraged, see commits 080b6f407635 ("bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE") and a7223f5bfcae ("powerpc: Avoid broken GCC __attribute__((optimize))").
Cheers, Nathan
arch/arm/probes/kprobes/actions-thumb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/probes/kprobes/actions-thumb.c b/arch/arm/probes/kprobes/actions-thumb.c index 51624fc263fc..c2fdaf9f6dba 100644 --- a/arch/arm/probes/kprobes/actions-thumb.c +++ b/arch/arm/probes/kprobes/actions-thumb.c @@ -438,7 +438,7 @@ t16_simulate_branch(probes_opcode_t insn, regs->ARM_pc = pc + (offset * 2); } -static unsigned long __kprobes +static unsigned long __kprobes __attribute__((optimize("no-omit-frame-pointer"))) t16_emulate_loregs(probes_opcode_t insn, struct arch_probes_insn *asi, struct pt_regs *regs) { @@ -521,7 +521,7 @@ t16_decode_hiregs(probes_opcode_t insn, struct arch_probes_insn *asi, return INSN_GOOD; } -static void __kprobes +static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) t16_emulate_push(probes_opcode_t insn, struct arch_probes_insn *asi, struct pt_regs *regs) { @@ -557,7 +557,7 @@ t16_decode_push(probes_opcode_t insn, struct arch_probes_insn *asi, return INSN_GOOD; } -static void __kprobes +static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) t16_emulate_pop_nopc(probes_opcode_t insn, struct arch_probes_insn *asi, struct pt_regs *regs) { @@ -576,7 +576,7 @@ t16_emulate_pop_nopc(probes_opcode_t insn, ); } -static void __kprobes +static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) t16_emulate_pop_pc(probes_opcode_t insn, struct arch_probes_insn *asi, struct pt_regs *regs) {
base-commit: 9bacdd8996c77c42ca004440be610692275ff9d0
2.17.1
linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On Fri, 17 Nov 2023 at 03:24, Nathan Chancellor nathan@kernel.org wrote:
On Wed, Nov 15, 2023 at 05:58:30PM +0800, Maria Yu wrote:
Registers r7 is removed in clobber list, so compiler may choose r7 for local variables usage, while r7 will be actually updated by the inline asm code. This caused the runtime behavior wrong. While those kind of reserved registers cannot be set to clobber list because of error like "inline asm clobber list contains reserved registers". Explicitly reserve r7 by adding attribute no-omit-frame-pointer for needed function, then in T32 asm code r7 is used as a frame pointer and is not available for use as a general-purpose register. Note that "no-omit-frame-pointer" will make the code size a little bigger to store the stack frame pointer. So limited to needed functions can have the less impact than the full source file.
Fixes: dd12e97f3c72 ("ARM: kprobes: treat R7 as the frame pointer register in Thumb2 builds") Signed-off-by: Maria Yu quic_aiquny@quicinc.com Cc: stable@vger.kernel.org
This causes warnings with clang:
arch/arm/probes/kprobes/actions-thumb.c:441:47: warning: unknown attribute 'optimize' ignored [-Wunknown-attributes] 441 | static unsigned long __kprobes __attribute__((optimize("no-omit-frame-pointer"))) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/probes/kprobes/actions-thumb.c:524:38: warning: unknown attribute 'optimize' ignored [-Wunknown-attributes] 524 | static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/probes/kprobes/actions-thumb.c:560:38: warning: unknown attribute 'optimize' ignored [-Wunknown-attributes] 560 | static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/probes/kprobes/actions-thumb.c:579:38: warning: unknown attribute 'optimize' ignored [-Wunknown-attributes] 579 | static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 4 warnings generated.
Furthermore, as far as I am aware, the optimize attribute has other issues so its use is discouraged, see commits 080b6f407635 ("bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE") and a7223f5bfcae ("powerpc: Avoid broken GCC __attribute__((optimize))").
Ah yes, apalogies for missing that. I did a test build with Clang but I did not spot the errors. So
Unreviewed-by: ....
Maria, please use the Makefile based per-file CFLAGS override that I suggested before. There is really no reason to make this per-function.
On 11/17/2023 1:36 AM, Ard Biesheuvel wrote:
On Fri, 17 Nov 2023 at 03:24, Nathan Chancellor nathan@kernel.org wrote:
On Wed, Nov 15, 2023 at 05:58:30PM +0800, Maria Yu wrote:
Registers r7 is removed in clobber list, so compiler may choose r7 for local variables usage, while r7 will be actually updated by the inline asm code. This caused the runtime behavior wrong. While those kind of reserved registers cannot be set to clobber list because of error like "inline asm clobber list contains reserved registers". Explicitly reserve r7 by adding attribute no-omit-frame-pointer for needed function, then in T32 asm code r7 is used as a frame pointer and is not available for use as a general-purpose register. Note that "no-omit-frame-pointer" will make the code size a little bigger to store the stack frame pointer. So limited to needed functions can have the less impact than the full source file.
Fixes: dd12e97f3c72 ("ARM: kprobes: treat R7 as the frame pointer register in Thumb2 builds") Signed-off-by: Maria Yu quic_aiquny@quicinc.com Cc: stable@vger.kernel.org
This causes warnings with clang:
arch/arm/probes/kprobes/actions-thumb.c:441:47: warning: unknown attribute 'optimize' ignored [-Wunknown-attributes] 441 | static unsigned long __kprobes __attribute__((optimize("no-omit-frame-pointer"))) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/probes/kprobes/actions-thumb.c:524:38: warning: unknown attribute 'optimize' ignored [-Wunknown-attributes] 524 | static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/probes/kprobes/actions-thumb.c:560:38: warning: unknown attribute 'optimize' ignored [-Wunknown-attributes] 560 | static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/probes/kprobes/actions-thumb.c:579:38: warning: unknown attribute 'optimize' ignored [-Wunknown-attributes] 579 | static void __kprobes __attribute__((optimize("no-omit-frame-pointer"))) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 4 warnings generated.
Furthermore, as far as I am aware, the optimize attribute has other issues so its use is discouraged, see commits 080b6f407635 ("bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE") and a7223f5bfcae ("powerpc: Avoid broken GCC __attribute__((optimize))").
Thx for trying this. I was tested with arm-linux-gnueabihf-gcc and not notice this.
Ah yes, apalogies for missing that. I did a test build with Clang but I did not spot the errors. So
Unreviewed-by: ....
Maria, please use the Makefile based per-file CFLAGS override that I suggested before. There is really no reason to make this per-function.
Ok. I will upload a new patchset.
linux-stable-mirror@lists.linaro.org
-
Aiqun(Maria) Yu -
Ard Biesheuvel -
Maria Yu
-
Nathan Chancellor