Move PCS_USB3_POWER_STATE_CONFIG1 register programming from pcs_tbl to the pcs_usb_tbl, where it belongs. Also, while we are at it, correct the offset of this register to point to 0x00, as expected.
Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550") Fixes: 39bbf82d8c2b ("phy: qcom-qmp: pcs-usb: Add v6 register offsets") Cc: Abel Vesa abel.vesa@linaro.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org --- drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 2 +- drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c index cbb28afce135..41b9be56eead 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c @@ -859,7 +859,6 @@ static const struct qmp_phy_init_tbl sm8550_usb3_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_PCS_TX_RX_CONFIG, 0x0c), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG1, 0x4b), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG5, 0x10), - QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1, 0x68), };
static const struct qmp_phy_init_tbl sm8550_usb3_pcs_usb_tbl[] = { @@ -867,6 +866,7 @@ static const struct qmp_phy_init_tbl sm8550_usb3_pcs_usb_tbl[] = { QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1, 0x68), };
static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = { diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h index 9510e63ba9d8..5409ddcd3eb5 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h @@ -12,7 +12,6 @@ #define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG3 0xcc #define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG6 0xd8 #define QPHY_USB_V6_PCS_REFGEN_REQ_CONFIG1 0xdc -#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1 0x90 #define QPHY_USB_V6_PCS_RX_SIGDET_LVL 0x188 #define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_L 0x190 #define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_H 0x194 @@ -23,6 +22,7 @@ #define QPHY_USB_V6_PCS_EQ_CONFIG1 0x1dc #define QPHY_USB_V6_PCS_EQ_CONFIG5 0x1ec
+#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1 0x00 #define QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x18 #define QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x3c #define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x40
On 06/09/2023 09:58, Dmitry Baryshkov wrote:
Move PCS_USB3_POWER_STATE_CONFIG1 register programming from pcs_tbl to the pcs_usb_tbl, where it belongs. Also, while we are at it, correct the offset of this register to point to 0x00, as expected.
Konrad already sent this https://lore.kernel.org/all/20230829-topic-8550_usbphy-v1-1-599ddbfa094a@lin...
Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550") Fixes: 39bbf82d8c2b ("phy: qcom-qmp: pcs-usb: Add v6 register offsets") Cc: Abel Vesa abel.vesa@linaro.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 2 +- drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c index cbb28afce135..41b9be56eead 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c @@ -859,7 +859,6 @@ static const struct qmp_phy_init_tbl sm8550_usb3_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_PCS_TX_RX_CONFIG, 0x0c), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG1, 0x4b), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG5, 0x10),
- QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1, 0x68), };
static const struct qmp_phy_init_tbl sm8550_usb3_pcs_usb_tbl[] = { @@ -867,6 +866,7 @@ static const struct qmp_phy_init_tbl sm8550_usb3_pcs_usb_tbl[] = { QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
- QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1, 0x68), };
static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = { diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h index 9510e63ba9d8..5409ddcd3eb5 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h @@ -12,7 +12,6 @@ #define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG3 0xcc #define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG6 0xd8 #define QPHY_USB_V6_PCS_REFGEN_REQ_CONFIG1 0xdc -#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1 0x90 #define QPHY_USB_V6_PCS_RX_SIGDET_LVL 0x188 #define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_L 0x190 #define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_H 0x194 @@ -23,6 +22,7 @@ #define QPHY_USB_V6_PCS_EQ_CONFIG1 0x1dc #define QPHY_USB_V6_PCS_EQ_CONFIG5 0x1ec +#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1 0x00 #define QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x18 #define QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x3c #define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x40
On Wed, 6 Sept 2023 at 11:02, Neil Armstrong neil.armstrong@linaro.org wrote:
On 06/09/2023 09:58, Dmitry Baryshkov wrote:
Move PCS_USB3_POWER_STATE_CONFIG1 register programming from pcs_tbl to the pcs_usb_tbl, where it belongs. Also, while we are at it, correct the offset of this register to point to 0x00, as expected.
Konrad already sent this https://lore.kernel.org/all/20230829-topic-8550_usbphy-v1-1-599ddbfa094a@lin...
Not quite. Or we'd need to land a separate fix for the register address.
Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550") Fixes: 39bbf82d8c2b ("phy: qcom-qmp: pcs-usb: Add v6 register offsets") Cc: Abel Vesa abel.vesa@linaro.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 2 +- drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c index cbb28afce135..41b9be56eead 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c @@ -859,7 +859,6 @@ static const struct qmp_phy_init_tbl sm8550_usb3_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_PCS_TX_RX_CONFIG, 0x0c), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG1, 0x4b), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG5, 0x10),
QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1, 0x68),};
static const struct qmp_phy_init_tbl sm8550_usb3_pcs_usb_tbl[] = {
@@ -867,6 +866,7 @@ static const struct qmp_phy_init_tbl sm8550_usb3_pcs_usb_tbl[] = { QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1, 0x68),};
static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = {
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h index 9510e63ba9d8..5409ddcd3eb5 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h @@ -12,7 +12,6 @@ #define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG3 0xcc #define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG6 0xd8 #define QPHY_USB_V6_PCS_REFGEN_REQ_CONFIG1 0xdc -#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1 0x90 #define QPHY_USB_V6_PCS_RX_SIGDET_LVL 0x188 #define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_L 0x190 #define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_H 0x194 @@ -23,6 +22,7 @@ #define QPHY_USB_V6_PCS_EQ_CONFIG1 0x1dc #define QPHY_USB_V6_PCS_EQ_CONFIG5 0x1ec
+#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1 0x00 #define QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x18 #define QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x3c #define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x40
linux-stable-mirror@lists.linaro.org
-
Dmitry Baryshkov -
Neil Armstrong