[PATCH AUTOSEL 4.14 1/7] blk-throttle: fix lockdep warning of "cgroup_mutex or RCU read lock required!"
From: Ming Lei ming.lei@redhat.com
[ Upstream commit 27b13e209ddca5979847a1b57890e0372c1edcee ]
Inside blkg_for_each_descendant_pre(), both css_for_each_descendant_pre() and blkg_lookup() requires RCU read lock, and either cgroup_assert_mutex_or_rcu_locked() or rcu_read_lock_held() is called.
Fix the warning by adding rcu read lock.
Reported-by: Changhui Zhong czhong@redhat.com Signed-off-by: Ming Lei ming.lei@redhat.com Link: https://lore.kernel.org/r/20231117023527.3188627-2-ming.lei@redhat.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/blk-throttle.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/block/blk-throttle.c b/block/blk-throttle.c index fcbbe2e45a2bb..e52a9632993a7 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -1391,6 +1391,7 @@ static void tg_conf_updated(struct throtl_grp *tg, bool global) tg_bps_limit(tg, READ), tg_bps_limit(tg, WRITE), tg_iops_limit(tg, READ), tg_iops_limit(tg, WRITE));
+ rcu_read_lock(); /* * Update has_rules[] flags for the updated tg's subtree. A tg is * considered to have rules if either the tg itself or any of its @@ -1418,6 +1419,7 @@ static void tg_conf_updated(struct throtl_grp *tg, bool global) this_tg->latency_target = max(this_tg->latency_target, parent_tg->latency_target); } + rcu_read_unlock();
/* * We're already holding queue_lock and know @tg is valid. Let's
From: Coly Li colyli@suse.de
[ Upstream commit 31f5b956a197d4ec25c8a07cb3a2ab69d0c0b82f ]
This patch adds code comments to bch_btree_node_get() and __bch_btree_node_alloc() that NULL pointer will not be returned and it is unnecessary to check NULL pointer by the callers of these routines.
Signed-off-by: Coly Li colyli@suse.de Link: https://lore.kernel.org/r/20231120052503.6122-10-colyli@suse.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/bcache/btree.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c index fba0fff8040d6..6312b01829204 100644 --- a/drivers/md/bcache/btree.c +++ b/drivers/md/bcache/btree.c @@ -972,6 +972,9 @@ static struct btree *mca_alloc(struct cache_set *c, struct btree_op *op, * * The btree node will have either a read or a write lock held, depending on * level and op->lock. + * + * Note: Only error code or btree pointer will be returned, it is unncessary + * for callers to check NULL pointer. */ struct btree *bch_btree_node_get(struct cache_set *c, struct btree_op *op, struct bkey *k, int level, bool write, @@ -1070,6 +1073,10 @@ static void btree_node_free(struct btree *b) mutex_unlock(&b->c->bucket_lock); }
+/* + * Only error code or btree pointer will be returned, it is unncessary for + * callers to check NULL pointer. + */ struct btree *__bch_btree_node_alloc(struct cache_set *c, struct btree_op *op, int level, bool wait, struct btree *parent)
From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit a6584711e64d9d12ab79a450ec3628fd35e4f476 ]
LKP found issues with a kernel doc in the driver:
core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events' core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig'
It looks like it were copy'n'paste typos when these descriptions had been introduced. Fix the typos.
Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202310070743.WALmRGSY-lkp@intel.com/ Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/r/20231120150756.1661425-1-andriy.shevchenko@linux.i... Reviewed-by: Rajneesh Bhardwaj irenic.rajneesh@gmail.com Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/intel_telemetry_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/x86/intel_telemetry_core.c b/drivers/platform/x86/intel_telemetry_core.c index 0d4c3808a6d89..a0595fcd945ea 100644 --- a/drivers/platform/x86/intel_telemetry_core.c +++ b/drivers/platform/x86/intel_telemetry_core.c @@ -111,7 +111,7 @@ static const struct telemetry_core_ops telm_defpltops = { /** * telemetry_update_events() - Update telemetry Configuration * @pss_evtconfig: PSS related config. No change if num_evts = 0. - * @pss_evtconfig: IOSS related config. No change if num_evts = 0. + * @ioss_evtconfig: IOSS related config. No change if num_evts = 0. * * This API updates the IOSS & PSS Telemetry configuration. Old config * is overwritten. Call telemetry_reset_events when logging is over @@ -185,7 +185,7 @@ EXPORT_SYMBOL_GPL(telemetry_reset_events); /** * telemetry_get_eventconfig() - Returns the pss and ioss events enabled * @pss_evtconfig: Pointer to PSS related configuration. - * @pss_evtconfig: Pointer to IOSS related configuration. + * @ioss_evtconfig: Pointer to IOSS related configuration. * @pss_len: Number of u32 elements allocated for pss_evtconfig array * @ioss_len: Number of u32 elements allocated for ioss_evtconfig array *
From: Denis Benato benato.denis96@gmail.com
[ Upstream commit 546edbd26cff7ae990e480a59150e801a06f77b1 ]
Some devices managed by this driver automatically set brightness to 0 before entering a suspended state and reset it back to a default brightness level after the resume: this has the effect of having the kernel report wrong brightness status after a sleep, and on some devices (like the Asus RC71L) that brightness is the intensity of LEDs directly facing the user.
Fix the above issue by setting back brightness to the level it had before entering a sleep state.
Signed-off-by: Denis Benato benato.denis96@gmail.com Signed-off-by: Luke D. Jones luke@ljones.dev Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-asus.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index 7cdbde2b114b3..52f65d0f44cae 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -592,6 +592,24 @@ static int asus_start_multitouch(struct hid_device *hdev) return 0; }
+static int __maybe_unused asus_resume(struct hid_device *hdev) { + struct asus_drvdata *drvdata = hid_get_drvdata(hdev); + int ret = 0; + + if (drvdata->kbd_backlight) { + const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0xba, 0xc5, 0xc4, + drvdata->kbd_backlight->cdev.brightness }; + ret = asus_kbd_set_report(hdev, buf, sizeof(buf)); + if (ret < 0) { + hid_err(hdev, "Asus failed to set keyboard backlight: %d\n", ret); + goto asus_resume_err; + } + } + +asus_resume_err: + return ret; +} + static int __maybe_unused asus_reset_resume(struct hid_device *hdev) { struct asus_drvdata *drvdata = hid_get_drvdata(hdev); @@ -768,6 +786,7 @@ static struct hid_driver asus_driver = { .input_configured = asus_input_configured, #ifdef CONFIG_PM .reset_resume = asus_reset_resume, + .resume = asus_resume, #endif .raw_event = asus_raw_event };
From: Aoba K nexp_0x17@outlook.com
[ Upstream commit 9ffccb691adb854e7b7f3ee57fbbda12ff70533f ]
Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch mode until the input mode feature is written by the host. The touchpad do report the input mode at touchpad(3), while itself working under mouse mode. As a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set feature in mt_set_input_mode for such device.
The touchpad reports as BLTP7853, which cannot retrive any useful manufacture information on the internel by this string at present. As the serial number of the laptop is GLO-G52, while DMI info reports the laptop serial number as GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX.
Signed-off-by: Aoba K nexp_0x17@outlook.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-multitouch.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 55b1023af31fa..2fa9013c90c82 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -1602,6 +1602,11 @@ static const struct hid_device_id mt_devices[] = { MT_USB_DEVICE(USB_VENDOR_ID_HANVON_ALT, USB_DEVICE_ID_HANVON_ALT_MULTITOUCH) },
+ /* HONOR GLO-GXXX panel */ + { .driver_data = MT_CLS_VTL, + HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8, + 0x347d, 0x7853) }, + /* Ilitek dual touch panel */ { .driver_data = MT_CLS_NSMU, MT_USB_DEVICE(USB_VENDOR_ID_ILITEK,
From: Linus Torvalds torvalds@linux-foundation.org
[ Upstream commit 125b0bb95dd6bec81b806b997a4ccb026eeecf8f ]
We really don't want to do atomic_read() or anything like that, since we already have the value, not the lock. The whole point of this is that we've loaded the lock from memory, and we want to check whether the value we loaded was a locked one or not.
The main use of this is the lockref code, which loads both the lock and the reference count in one atomic operation, and then works on that combined value. With the atomic_read(), the compiler would pointlessly spill the value to the stack, in order to then be able to read it back "atomically".
This is the qspinlock version of commit c6f4a9002252 ("asm-generic: ticket-lock: Optimize arch_spin_value_unlocked()") which fixed this same bug for ticket locks.
Cc: Guo Ren guoren@kernel.org Cc: Ingo Molnar mingo@kernel.org Cc: Waiman Long longman@redhat.com Link: https://lore.kernel.org/all/CAHk-=whNRv0v6kQiV5QO6DJhjH4KEL36vWQ6Re8Csrnh4zb... Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/asm-generic/qspinlock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/asm-generic/qspinlock.h b/include/asm-generic/qspinlock.h index 66260777d6447..c133ed3183150 100644 --- a/include/asm-generic/qspinlock.h +++ b/include/asm-generic/qspinlock.h @@ -49,7 +49,7 @@ static __always_inline int queued_spin_is_locked(struct qspinlock *lock) */ static __always_inline int queued_spin_value_unlocked(struct qspinlock lock) { - return !atomic_read(&lock.val); + return !lock.val.counter; }
/**
From: Lech Perczak lech.perczak@gmail.com
[ Upstream commit 99360d9620f09fb8bc15548d855011bbb198c680 ]
Interface 4 is used by for QMI interface in stock firmware of MF28D, the router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up from option driver. The proper configuration is:
Interface mapping is: 0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0189 Rev= 0.00 S: Manufacturer=ZTE, Incorporated S: Product=ZTE LTE Technologies MSM C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
Cc: Bjørn Mork bjorn@mork.no Signed-off-by: Lech Perczak lech.perczak@gmail.com Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 880aa7f6a779c..c6a1129d6274e 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1242,6 +1242,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x0168, 4)}, {QMI_FIXED_INTF(0x19d2, 0x0176, 3)}, {QMI_FIXED_INTF(0x19d2, 0x0178, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0189, 4)}, /* ZTE MF290 */ {QMI_FIXED_INTF(0x19d2, 0x0191, 4)}, /* ZTE EuFi890 */ {QMI_FIXED_INTF(0x19d2, 0x0199, 1)}, /* ZTE MF820S */ {QMI_FIXED_INTF(0x19d2, 0x0200, 1)},
linux-stable-mirror@lists.linaro.org
-
Sasha Levin