From: Joseph Hunkeler jhunkeler@gmail.com
[ Upstream commit 22ce6843abec19270bf69b176d7ee0a4ef781da5 ]
Enables display microphone on the HP OMEN 16z-n000 (8A42) laptop
Signed-off-by: Joseph Hunkeler jhunkeler@gmail.com Link: https://lore.kernel.org/r/20230216155007.26143-1-jhunkeler@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 36314753923b8..4e681e9c08fe5 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -255,6 +255,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "15NBC1011"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "OMEN by HP Gaming Laptop 16z-n000"), + } + }, {} };
From: Adrien Thierry athierry@redhat.com
[ Upstream commit 7dafc3e007918384c8693ff8d70381b5c1e9c247 ]
During UFS initialization, devfreq initialization is asynchronous: ufshcd_async_scan() calls ufshcd_add_lus(), which in turn initializes devfreq for UFS. The simple ondemand governor is then loaded. If it is built as a module, request_module() is called and throws a warning:
WARNING: CPU: 7 PID: 167 at kernel/kmod.c:136 __request_module+0x1e0/0x460 Modules linked in: crct10dif_ce llcc_qcom phy_qcom_qmp_usb ufs_qcom phy_qcom_snps_femto_v2 ufshcd_pltfrm phy_qcom_qmp_combo ufshcd_core phy_qcom_qmp_ufs qcom_wdt socinfo fuse ipv6 CPU: 7 PID: 167 Comm: kworker/u16:3 Not tainted 6.2.0-rc6-00009-g58706f7fb045 #1 Hardware name: Qualcomm SA8540P Ride (DT) Workqueue: events_unbound async_run_entry_fn pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __request_module+0x1e0/0x460 lr : __request_module+0x1d8/0x460 sp : ffff800009323b90 x29: ffff800009323b90 x28: 0000000000000000 x27: 0000000000000000 x26: ffff800009323d50 x25: ffff7b9045f57810 x24: ffff7b9045f57830 x23: ffffdc5a83e426e8 x22: ffffdc5ae80a9818 x21: 0000000000000001 x20: ffffdc5ae7502f98 x19: ffff7b9045f57800 x18: ffffffffffffffff x17: 312f716572667665 x16: 642f7366752e3030 x15: 0000000000000000 x14: 000000000000021c x13: 0000000000005400 x12: ffff7b9042ed7614 x11: ffff7b9042ed7600 x10: 00000000636c0890 x9 : 0000000000000038 x8 : ffff7b9045f2c880 x7 : ffff7b9045f57c68 x6 : 0000000000000080 x5 : 0000000000000000 x4 : 8000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffffdc5ae5d382f0 x0 : 0000000000000001 Call trace: __request_module+0x1e0/0x460 try_then_request_governor+0x7c/0x100 devfreq_add_device+0x4b0/0x5fc ufshcd_async_scan+0x1d4/0x310 [ufshcd_core] async_run_entry_fn+0x34/0xe0 process_one_work+0x1d0/0x320 worker_thread+0x14c/0x444 kthread+0x10c/0x110 ret_from_fork+0x10/0x20
This occurs because synchronous module loading from async is not allowed. According to __request_module():
/* * We don't allow synchronous module loading from async. Module * init may invoke async_synchronize_full() which will end up * waiting for this task which already is waiting for the module * loading to complete, leading to a deadlock. */
Such a deadlock was experienced on the Qualcomm QDrive3/sa8540p-ride. With DEVFREQ_GOV_SIMPLE_ONDEMAND=m, the boot hangs after the warning.
Fix both the warning and the deadlock by moving devfreq initialization out of the async routine.
Tested on the sa8540p-ride by using fio to put the UFS under load, and printing the trace generated by /sys/kernel/tracing/events/ufs/ufshcd_clk_scaling events. The trace looks similar with and without the change.
Link: https://lore.kernel.org/r/20230217194423.42553-1-athierry@redhat.com Signed-off-by: Adrien Thierry athierry@redhat.com Reviewed-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ufs/core/ufshcd.c | 47 ++++++++++++++++++++++++++------------- include/ufs/ufshcd.h | 1 + 2 files changed, 32 insertions(+), 16 deletions(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index edd34dac91b1d..e652624c449a9 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -1354,6 +1354,13 @@ static int ufshcd_devfreq_target(struct device *dev, struct ufs_clk_info *clki; unsigned long irq_flags;
+ /* + * Skip devfreq if UFS initialization is not finished. + * Otherwise ufs could be in a inconsistent state. + */ + if (!smp_load_acquire(&hba->logical_unit_scan_finished)) + return 0; + if (!ufshcd_is_clkscaling_supported(hba)) return -EINVAL;
@@ -8184,22 +8191,6 @@ static int ufshcd_add_lus(struct ufs_hba *hba) if (ret) goto out;
- /* Initialize devfreq after UFS device is detected */ - if (ufshcd_is_clkscaling_supported(hba)) { - memcpy(&hba->clk_scaling.saved_pwr_info.info, - &hba->pwr_info, - sizeof(struct ufs_pa_layer_attr)); - hba->clk_scaling.saved_pwr_info.is_valid = true; - hba->clk_scaling.is_allowed = true; - - ret = ufshcd_devfreq_init(hba); - if (ret) - goto out; - - hba->clk_scaling.is_enabled = true; - ufshcd_init_clk_scaling_sysfs(hba); - } - ufs_bsg_probe(hba); ufshpb_init(hba); scsi_scan_host(hba->host); @@ -8338,6 +8329,12 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie) if (ret) { pm_runtime_put_sync(hba->dev); ufshcd_hba_exit(hba); + } else { + /* + * Make sure that when reader code sees UFS initialization has finished, + * all initialization steps have really been executed. + */ + smp_store_release(&hba->logical_unit_scan_finished, true); } }
@@ -9892,12 +9889,30 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) */ ufshcd_set_ufs_dev_active(hba);
+ /* Initialize devfreq */ + if (ufshcd_is_clkscaling_supported(hba)) { + memcpy(&hba->clk_scaling.saved_pwr_info.info, + &hba->pwr_info, + sizeof(struct ufs_pa_layer_attr)); + hba->clk_scaling.saved_pwr_info.is_valid = true; + hba->clk_scaling.is_allowed = true; + + err = ufshcd_devfreq_init(hba); + if (err) + goto rpm_put_sync; + + hba->clk_scaling.is_enabled = true; + ufshcd_init_clk_scaling_sysfs(hba); + } + async_schedule(ufshcd_async_scan, hba); ufs_sysfs_add_nodes(hba->dev);
device_enable_async_suspend(dev); return 0;
+rpm_put_sync: + pm_runtime_put_sync(dev); free_tmf_queue: blk_mq_destroy_queue(hba->tmf_queue); free_tmf_tag_set: diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h index b54f22840dabf..0ef1ec6a3b4d1 100644 --- a/include/ufs/ufshcd.h +++ b/include/ufs/ufshcd.h @@ -894,6 +894,7 @@ struct ufs_hba { struct completion *uic_async_done;
enum ufshcd_state ufshcd_state; + bool logical_unit_scan_finished; u32 eh_flags; u32 intr_mask; u16 ee_ctrl_mask;
From: Duc Anh Le lub.the.studio@gmail.com
[ Upstream commit d52279d5c9204a041e9ba02a66a353573b2f96e4 ]
This model requires an additional detection quirk to enable the internal microphone.
Signed-off-by: Duc Anh Le lub.the.studio@gmail.com Link: https://lore.kernel.org/r/20230227234921.7784-1-lub.the.studio@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 4e681e9c08fe5..4a69ce702360c 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -262,6 +262,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "OMEN by HP Gaming Laptop 16z-n000"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "HP"), + DMI_MATCH(DMI_BOARD_NAME, "8A43"), + } + }, {} };
From: Mario Limonciello mario.limonciello@amd.com
[ Upstream commit e32d546c483a2a0f607687f5b521c2a2f942ffbe ]
There was a quirk in `acpi/x86/s2idle.c` for an HP Elitebook G9 platforms to force AMD GUID codepath instead of Microsoft codepath.
This was due to a bug with WCN6855 WLAN firmware interaction with the system.
This bug is fixed by WCN6855 firmware: WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Remove the quirk as it's no longer necessary with this firmware.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/... Tested-by: Anson Tsao anson.tsao@amd.com Signed-off-by: Mario Limonciello mario.limonciello@amd.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/x86/s2idle.c | 24 ------------------------ 1 file changed, 24 deletions(-)
diff --git a/drivers/acpi/x86/s2idle.c b/drivers/acpi/x86/s2idle.c index c7afce465a071..e499c60c45791 100644 --- a/drivers/acpi/x86/s2idle.c +++ b/drivers/acpi/x86/s2idle.c @@ -384,29 +384,6 @@ static const struct acpi_device_id amd_hid_ids[] = { {} };
-static int lps0_prefer_amd(const struct dmi_system_id *id) -{ - pr_debug("Using AMD GUID w/ _REV 2.\n"); - rev_id = 2; - return 0; -} -static const struct dmi_system_id s2idle_dmi_table[] __initconst = { - { - /* - * AMD Rembrandt based HP EliteBook 835/845/865 G9 - * Contains specialized AML in AMD/_REV 2 path to avoid - * triggering a bug in Qualcomm WLAN firmware. This may be - * removed in the future if that firmware is fixed. - */ - .callback = lps0_prefer_amd, - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "HP"), - DMI_MATCH(DMI_BOARD_NAME, "8990"), - }, - }, - {} -}; - static int lps0_device_attach(struct acpi_device *adev, const struct acpi_device_id *not_used) { @@ -586,7 +563,6 @@ static const struct platform_s2idle_ops acpi_s2idle_ops_lps0 = {
void __init acpi_s2idle_setup(void) { - dmi_check_system(s2idle_dmi_table); acpi_scan_add_handler(&lps0_handler); s2idle_set_ops(&acpi_s2idle_ops_lps0); }
From: Mario Limonciello mario.limonciello@amd.com
[ Upstream commit e2a56364485e7789e7b8f342637c7f3a219f7ede ]
commit 018d6711c26e4 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable") introduced a quirk to allow a system with ambiguous use of _ADR 0 to force StorageD3Enable.
It was reported that several more Dell systems suffered the same symptoms. As the list is continuing to grow but these are all Cezanne systems, instead add Cezanne to the CPU list to apply the StorageD3Enable property and remove the whole list.
It was also reported that an HP system only has StorageD3Enable on the ACPI device for the first NVME disk, not the second.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217003 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216773 Reported-by: David Alvarez Lombardi dqalombardi@proton.me Reported-by: dbilios@stdio.gr Reported-and-tested-by: Elvis Angelaccio elvis.angelaccio@kde.org Tested-by: victor.bonnelle@proton.me Tested-by: hurricanepootis@protonmail.com Signed-off-by: Mario Limonciello mario.limonciello@amd.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/x86/utils.c | 37 +++++++++++++------------------------ 1 file changed, 13 insertions(+), 24 deletions(-)
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c index 4e816bb402f68..e45285d4e62a4 100644 --- a/drivers/acpi/x86/utils.c +++ b/drivers/acpi/x86/utils.c @@ -200,39 +200,28 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s * a hardcoded allowlist for D3 support, which was used for these platforms. * * This allows quirking on Linux in a similar fashion. + * + * Cezanne systems shouldn't *normally* need this as the BIOS includes + * StorageD3Enable. But for two reasons we have added it. + * 1) The BIOS on a number of Dell systems have ambiguity + * between the same value used for _ADR on ACPI nodes GPP1.DEV0 and GPP1.NVME. + * GPP1.NVME is needed to get StorageD3Enable node set properly. + * https://bugzilla.kernel.org/show_bug.cgi?id=216440 + * https://bugzilla.kernel.org/show_bug.cgi?id=216773 + * https://bugzilla.kernel.org/show_bug.cgi?id=217003 + * 2) On at least one HP system StorageD3Enable is missing on the second NVME + disk in the system. */ static const struct x86_cpu_id storage_d3_cpu_ids[] = { X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 96, NULL), /* Renoir */ X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 104, NULL), /* Lucienne */ - {} -}; - -static const struct dmi_system_id force_storage_d3_dmi[] = { - { - /* - * _ADR is ambiguous between GPP1.DEV0 and GPP1.NVME - * but .NVME is needed to get StorageD3Enable node - * https://bugzilla.kernel.org/show_bug.cgi?id=216440 - */ - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 14 7425 2-in-1"), - } - }, - { - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 16 5625"), - } - }, + X86_MATCH_VENDOR_FAM_MODEL(AMD, 25, 80, NULL), /* Cezanne */ {} };
bool force_storage_d3(void) { - const struct dmi_system_id *dmi_id = dmi_first_match(force_storage_d3_dmi); - - return dmi_id || x86_match_cpu(storage_d3_cpu_ids); + return x86_match_cpu(storage_d3_cpu_ids); }
/*
From: Alexandre Ghiti alex@ghiti.fr
[ Upstream commit 61fc1ee8be26bc192d691932b0a67eabee45d12f ]
Increase COMMAND_LINE_SIZE as the current default value is too low for syzbot kernel command line.
There has been considerable discussion on this patch that has led to a larger patch set removing COMMAND_LINE_SIZE from the uapi headers on all ports. That's not quite done yet, but it's gotten far enough we're confident this is not a uABI change so this is safe.
Reported-by: Dmitry Vyukov dvyukov@google.com Signed-off-by: Alexandre Ghiti alex@ghiti.fr Link: https://lore.kernel.org/r/20210316193420.904-1-alex@ghiti.fr [Palmer: it's not uabi] Link: https://lore.kernel.org/linux-riscv/874b8076-b0d1-4aaa-bcd8-05d523060152@app... Signed-off-by: Palmer Dabbelt palmer@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/include/uapi/asm/setup.h | 8 ++++++++ 1 file changed, 8 insertions(+) create mode 100644 arch/riscv/include/uapi/asm/setup.h
diff --git a/arch/riscv/include/uapi/asm/setup.h b/arch/riscv/include/uapi/asm/setup.h new file mode 100644 index 0000000000000..66b13a5228808 --- /dev/null +++ b/arch/riscv/include/uapi/asm/setup.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ + +#ifndef _UAPI_ASM_RISCV_SETUP_H +#define _UAPI_ASM_RISCV_SETUP_H + +#define COMMAND_LINE_SIZE 1024 + +#endif /* _UAPI_ASM_RISCV_SETUP_H */
linux-stable-mirror@lists.linaro.org
-
Sasha Levin