[PATCH AUTOSEL 5.9 01/39] phy: usb: Fix incorrect clearing of tca_drv_sel bit in SETUP reg for 7211
From: Al Cooper alcooperx@gmail.com
[ Upstream commit 209c805835b29495cf66cc705b206da8f4a68e6e ]
The 7211a0 has a tca_drv_sel bit in the USB SETUP register that should never be enabled. This feature is only used if there is a USB Type-C PHY, and the 7211 does not have one. If the bit is enabled, the VBUS signal will never be asserted. In the 7211a0, the bit was incorrectly defaulted to on so the driver had to clear the bit. In the 7211c0 the state was inverted so the driver should no longer clear the bit. This hasn't been a problem because all current 7211 boards don't use the VBUS signal, but there are some future customer boards that may use it.
Signed-off-by: Al Cooper alcooperx@gmail.com Acked-by: Florian Fainelli f.fainelli@gmail.com Link: https://lore.kernel.org/r/20201002190115.48017-1-alcooperx@gmail.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c index 456dc4a100c20..e63457e145c71 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c @@ -270,11 +270,6 @@ static void usb_init_common_7211b0(struct brcm_usb_init_params *params) reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT; brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
- /* Fix the incorrect default */ - reg = brcm_usb_readl(ctrl + USB_CTRL_SETUP); - reg &= ~USB_CTRL_SETUP_tca_drv_sel_MASK; - brcm_usb_writel(reg, ctrl + USB_CTRL_SETUP); - usb_init_common(params);
/*
From: Maciej Matuszczyk maccraft123mc@gmail.com
[ Upstream commit 01fe332800d0d2f94337b45c1973f4cf28ae6195 ]
This fixes a poweroff issue when this is supposed to happen via PSCI.
Signed-off-by: Maciej Matuszczyk maccraft123mc@gmail.com Link: https://lore.kernel.org/r/20201023181629.119727-1-maccraft123mc@gmail.com Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts | 1 - 1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index 35bd6b904b9c7..3376810385193 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -243,7 +243,6 @@ rk817: pmic@20 { interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; - rockchip,system-power-controller; wakeup-source; #clock-cells = <1>; clock-output-names = "rk808-clkout1", "xin32k";
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit 04516706bb99889986ddfa3a769ed50d2dc7ac13 ]
When we read device memory, we lock a spinlock, write the address we want to read from the device and then spin in a loop reading the data in 32-bit quantities from another register.
As the description makes clear, this is rather inefficient, incurring a PCIe bus transaction for every read. In a typical device today, we want to read 786k SMEM if it crashes, leading to 192k register reads. Occasionally, we've seen the whole loop take over 20 seconds and then triggering the soft lockup detector.
Clearly, it is unreasonable to spin here for such extended periods of time.
To fix this, break the loop down into an outer and an inner loop, and break out of the inner loop if more than half a second elapsed. To avoid too much overhead, check for that only every 128 reads, though there's no particular reason for that number. Then, unlock and relock to obtain NIC access again, reprogram the start address and continue.
This will keep (interrupt) latencies on the CPU down to a reasonable time.
Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Mordechay Goodstein mordechay.goodstein@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/iwlwifi.20201022165103.45878a7e49aa.I3b9b9c5a10002... Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/wireless/intel/iwlwifi/pcie/trans.c | 36 ++++++++++++++----- 1 file changed, 27 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index e5160d6208688..6393e895f95c6 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -2155,18 +2155,36 @@ static int iwl_trans_pcie_read_mem(struct iwl_trans *trans, u32 addr, void *buf, int dwords) { unsigned long flags; - int offs, ret = 0; + int offs = 0; u32 *vals = buf;
- if (iwl_trans_grab_nic_access(trans, &flags)) { - iwl_write32(trans, HBUS_TARG_MEM_RADDR, addr); - for (offs = 0; offs < dwords; offs++) - vals[offs] = iwl_read32(trans, HBUS_TARG_MEM_RDAT); - iwl_trans_release_nic_access(trans, &flags); - } else { - ret = -EBUSY; + while (offs < dwords) { + /* limit the time we spin here under lock to 1/2s */ + ktime_t timeout = ktime_add_us(ktime_get(), 500 * USEC_PER_MSEC); + + if (iwl_trans_grab_nic_access(trans, &flags)) { + iwl_write32(trans, HBUS_TARG_MEM_RADDR, + addr + 4 * offs); + + while (offs < dwords) { + vals[offs] = iwl_read32(trans, + HBUS_TARG_MEM_RDAT); + offs++; + + /* calling ktime_get is expensive so + * do it once in 128 reads + */ + if (offs % 128 == 0 && ktime_after(ktime_get(), + timeout)) + break; + } + iwl_trans_release_nic_access(trans, &flags); + } else { + return -EBUSY; + } } - return ret; + + return 0; }
static int iwl_trans_pcie_write_mem(struct iwl_trans *trans, u32 addr,
From: Markus Reichl m.reichl@fivetechno.de
[ Upstream commit 0011c6d182774fc781fb9e115ebe8baa356029ae ]
Recently introduced async probe on mmc devices can shuffle block IDs. Pin them to fixed values to ease booting in environments where UUIDs are not practical. Use newly introduced aliases for mmcblk devices from [1].
[1] https://patchwork.kernel.org/patch/11747669/
Signed-off-by: Markus Reichl m.reichl@fivetechno.de Reviewed-by: Douglas Anderson dianders@chromium.org Link: https://lore.kernel.org/r/20201104162356.1251-1-m.reichl@fivetechno.de Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index ada724b12f014..7a9a7aca86c6a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -29,6 +29,9 @@ aliases { i2c6 = &i2c6; i2c7 = &i2c7; i2c8 = &i2c8; + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2;
From: Markus Reichl m.reichl@fivetechno.de
[ Upstream commit 7327c8b98e2e14c47021eea14d1ab268086a6408 ]
After patch [1] SD-card becomes mmc1 and eMMC becomes mmc2. Correct trigger of LEDs accordingly.
[1] https://patchwork.kernel.org/patch/11881427
Signed-off-by: Markus Reichl m.reichl@fivetechno.de Link: https://lore.kernel.org/r/20201104192933.1001-1-m.reichl@fivetechno.de Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index b85ec31cd2835..78ef0037ad4b5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -74,14 +74,14 @@ diy_led: led-1 { label = "red:diy"; gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; default-state = "off"; - linux,default-trigger = "mmc1"; + linux,default-trigger = "mmc2"; };
yellow_led: led-2 { label = "yellow:yellow-led"; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; default-state = "off"; - linux,default-trigger = "mmc0"; + linux,default-trigger = "mmc1"; }; };
From: Mordechay Goodstein mordechay.goodstein@intel.com
[ Upstream commit c8a2e7a29702fe4626b7aa81149b7b7164e20606 ]
Currently, our max tpt is limited to max HT A-MPDU for LB, and max VHT A-MPDU for HB. Configure HE exponent value correctly to achieve HE max A-MPDU, both on LB and HB.
Signed-off-by: Mordechay Goodstein mordechay.goodstein@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/iwlwifi.20201107104557.4486852ebb56.I9eb0d028e31f1... Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/wireless/intel/iwlwifi/fw/api/sta.h | 10 +++++----- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 18 ++++++++++++++++++ 2 files changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/sta.h b/drivers/net/wireless/intel/iwlwifi/fw/api/sta.h index c010e6febbf47..6a071b3c8118c 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/api/sta.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/sta.h @@ -5,10 +5,9 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH * Copyright(c) 2016 - 2017 Intel Deutschland GmbH - * Copyright(c) 2018 - 2019 Intel Corporation + * Copyright(c) 2012-2014, 2018 - 2020 Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -28,10 +27,9 @@ * * BSD LICENSE * - * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH * Copyright(c) 2016 - 2017 Intel Deutschland GmbH - * Copyright(c) 2018 - 2019 Intel Corporation + * Copyright(c) 2012-2014, 2018 - 2020 Intel Corporation * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -128,7 +126,9 @@ enum iwl_sta_flags { STA_FLG_MAX_AGG_SIZE_256K = (5 << STA_FLG_MAX_AGG_SIZE_SHIFT), STA_FLG_MAX_AGG_SIZE_512K = (6 << STA_FLG_MAX_AGG_SIZE_SHIFT), STA_FLG_MAX_AGG_SIZE_1024K = (7 << STA_FLG_MAX_AGG_SIZE_SHIFT), - STA_FLG_MAX_AGG_SIZE_MSK = (7 << STA_FLG_MAX_AGG_SIZE_SHIFT), + STA_FLG_MAX_AGG_SIZE_2M = (8 << STA_FLG_MAX_AGG_SIZE_SHIFT), + STA_FLG_MAX_AGG_SIZE_4M = (9 << STA_FLG_MAX_AGG_SIZE_SHIFT), + STA_FLG_MAX_AGG_SIZE_MSK = (0xf << STA_FLG_MAX_AGG_SIZE_SHIFT),
STA_FLG_AGG_MPDU_DENS_SHIFT = 23, STA_FLG_AGG_MPDU_DENS_2US = (4 << STA_FLG_AGG_MPDU_DENS_SHIFT), diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 9e124755a3cee..2158fd2eff736 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -196,6 +196,7 @@ int iwl_mvm_sta_send_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta, mpdu_dens = sta->ht_cap.ampdu_density; }
+ if (sta->vht_cap.vht_supported) { agg_size = sta->vht_cap.cap & IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK; @@ -205,6 +206,23 @@ int iwl_mvm_sta_send_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta, agg_size = sta->ht_cap.ampdu_factor; }
+ /* D6.0 10.12.2 A-MPDU length limit rules + * A STA indicates the maximum length of the A-MPDU preEOF padding + * that it can receive in an HE PPDU in the Maximum A-MPDU Length + * Exponent field in its HT Capabilities, VHT Capabilities, + * and HE 6 GHz Band Capabilities elements (if present) and the + * Maximum AMPDU Length Exponent Extension field in its HE + * Capabilities element + */ + if (sta->he_cap.has_he) + agg_size += u8_get_bits(sta->he_cap.he_cap_elem.mac_cap_info[3], + IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_MASK); + + /* Limit to max A-MPDU supported by FW */ + if (agg_size > (STA_FLG_MAX_AGG_SIZE_4M >> STA_FLG_MAX_AGG_SIZE_SHIFT)) + agg_size = (STA_FLG_MAX_AGG_SIZE_4M >> + STA_FLG_MAX_AGG_SIZE_SHIFT); + add_sta_cmd.station_flags |= cpu_to_le32(agg_size << STA_FLG_MAX_AGG_SIZE_SHIFT); add_sta_cmd.station_flags |=
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit edb625208d84aef179e3f16590c1c582fc5fdae6 ]
On some platforms, the preset values aren't correct and then we may get a completion timeout in the firmware. Change the LTR configuration to avoid that. The firmware will do some more complex reinit of this later, but for the boot process we use ~250usec.
Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/iwlwifi.20201107104557.d83d591c05ba.I42885c9fb500b... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/iwl-csr.h | 10 ++++++++++ .../intel/iwlwifi/pcie/ctxt-info-gen3.c | 20 +++++++++++++++++++ 2 files changed, 30 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-csr.h b/drivers/net/wireless/intel/iwlwifi/iwl-csr.h index cb9e8e189a1a4..1d48c7d7fffd4 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-csr.h @@ -147,6 +147,16 @@ #define CSR_MAC_SHADOW_REG_CTL2 (CSR_BASE + 0x0AC) #define CSR_MAC_SHADOW_REG_CTL2_RX_WAKE 0xFFFF
+/* LTR control (since IWL_DEVICE_FAMILY_22000) */ +#define CSR_LTR_LONG_VAL_AD (CSR_BASE + 0x0D4) +#define CSR_LTR_LONG_VAL_AD_NO_SNOOP_REQ 0x80000000 +#define CSR_LTR_LONG_VAL_AD_NO_SNOOP_SCALE 0x1c000000 +#define CSR_LTR_LONG_VAL_AD_NO_SNOOP_VAL 0x03ff0000 +#define CSR_LTR_LONG_VAL_AD_SNOOP_REQ 0x00008000 +#define CSR_LTR_LONG_VAL_AD_SNOOP_SCALE 0x00001c00 +#define CSR_LTR_LONG_VAL_AD_SNOOP_VAL 0x000003ff +#define CSR_LTR_LONG_VAL_AD_SCALE_USEC 2 + /* GIO Chicken Bits (PCI Express bus link power management) */ #define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c index 1ab1366004159..0fc2a6e49f9ee 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c @@ -252,6 +252,26 @@ int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans,
iwl_set_bit(trans, CSR_CTXT_INFO_BOOT_CTRL, CSR_AUTO_FUNC_BOOT_ENA); + + if (trans->trans_cfg->device_family == IWL_DEVICE_FAMILY_AX210) { + /* + * The firmware initializes this again later (to a smaller + * value), but for the boot process initialize the LTR to + * ~250 usec. + */ + u32 val = CSR_LTR_LONG_VAL_AD_NO_SNOOP_REQ | + u32_encode_bits(CSR_LTR_LONG_VAL_AD_SCALE_USEC, + CSR_LTR_LONG_VAL_AD_NO_SNOOP_SCALE) | + u32_encode_bits(250, + CSR_LTR_LONG_VAL_AD_NO_SNOOP_VAL) | + CSR_LTR_LONG_VAL_AD_SNOOP_REQ | + u32_encode_bits(CSR_LTR_LONG_VAL_AD_SCALE_USEC, + CSR_LTR_LONG_VAL_AD_SNOOP_SCALE) | + u32_encode_bits(250, CSR_LTR_LONG_VAL_AD_SNOOP_VAL); + + iwl_write32(trans, CSR_LTR_LONG_VAL_AD, val); + } + if (trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_AX210) iwl_write_umac_prph(trans, UREG_CPU_INIT_RUN, 1); else
From: Sara Sharon sara.sharon@intel.com
[ Upstream commit fe56d05ee6c87f6a1a8c7267affd92c9438249cc ]
During CSA, we briefly nullify the phy context, in __iwl_mvm_unassign_vif_chanctx. In case we have a FW assert right after it, it remains NULL though. We end up running into endless loop due to mac80211 trying repeatedly to move us to ASSOC state, and we keep returning -EINVAL. Later down the road we hit a kernel panic.
Detect and avoid this endless loop.
Signed-off-by: Sara Sharon sara.sharon@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/iwlwifi.20201107104557.d64de2c17bff.Iedd0d2afa20a2... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 34362dc0d4612..f2d65e8384105 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -3057,7 +3057,7 @@ static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw,
/* this would be a mac80211 bug ... but don't crash */ if (WARN_ON_ONCE(!mvmvif->phy_ctxt)) - return -EINVAL; + return test_bit(IWL_MVM_STATUS_HW_RESTART_REQUESTED, &mvm->status) ? 0 : -EINVAL;
/* * If we are in a STA removal flow and in DQA mode:
From: Michael Ellerman mpe@ellerman.id.au
[ Upstream commit e02152ba2810f7c88cb54e71cda096268dfa9241 ]
Currently a build with CONFIG_E200=y will fail with:
Error: invalid switch -me200 Error: unrecognized option -me200
Upstream binutils has never supported an -me200 option. Presumably it was supported at some point by either a fork or Freescale internal binutils.
We can't support code that we can't even build test, so drop the addition of -me200 to the build flags, so we can at least build with CONFIG_E200=y.
Reported-by: Németh Márton nm127@freemail.hu Reported-by: kernel test robot lkp@intel.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Reviewed-by: Nick Desaulniers ndesaulniers@google.com Acked-by: Scott Wood oss@buserror.net Link: https://lore.kernel.org/r/20201116120913.165317-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/Makefile | 1 - 1 file changed, 1 deletion(-)
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 3e8da9cf2eb9d..e6643d5699fef 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -249,7 +249,6 @@ KBUILD_CFLAGS += $(call cc-option,-mno-string) cpu-as-$(CONFIG_40x) += -Wa,-m405 cpu-as-$(CONFIG_44x) += -Wa,-m440 cpu-as-$(CONFIG_ALTIVEC) += $(call as-option,-Wa$(comma)-maltivec) -cpu-as-$(CONFIG_E200) += -Wa,-me200 cpu-as-$(CONFIG_E500) += -Wa,-me500
# When using '-many -mpower4' gas will first try and find a matching power4
From: Zhen Lei thunder.leizhen@huawei.com
[ Upstream commit 2013a4b684b6eb614ee5c9a3c07b0ae6f5ca96d9 ]
The scripts/dtc/checks.c requires that the node have empty "dma-ranges" property must have the same "#address-cells" and "#size-cells" values as the parent node. Otherwise, the following warnings is reported:
arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi:7.3-14: Warning \ (dma_ranges_format): /usb:dma-ranges: empty "dma-ranges" property but \ its #address-cells (1) differs from / (2) arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi:7.3-14: Warning \ (dma_ranges_format): /usb:dma-ranges: empty "dma-ranges" property but \ its #size-cells (1) differs from / (2)
Arnd Bergmann figured out why it's necessary: Also note that the #address-cells=<1> means that any device under this bus is assumed to only support 32-bit addressing, and DMA will have to go through a slow swiotlb in the absence of an IOMMU.
Suggested-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Zhen Lei thunder.leizhen@huawei.com Link: https://lore.kernel.org/r/20201016090833.1892-2-thunder.leizhen@huawei.com' Acked-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- .../dts/broadcom/stingray/stingray-usb.dtsi | 20 +++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi index 55259f973b5a9..aef8f2b00778d 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi @@ -5,20 +5,20 @@ usb { compatible = "simple-bus"; dma-ranges; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x68500000 0x00400000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>;
usbphy0: usb-phy@0 { compatible = "brcm,sr-usb-combo-phy"; - reg = <0x00000000 0x100>; + reg = <0x0 0x00000000 0x0 0x100>; #phy-cells = <1>; status = "disabled"; };
xhci0: usb@1000 { compatible = "generic-xhci"; - reg = <0x00001000 0x1000>; + reg = <0x0 0x00001000 0x0 0x1000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbphy0 1>, <&usbphy0 0>; phy-names = "phy0", "phy1"; @@ -28,7 +28,7 @@ xhci0: usb@1000 {
bdc0: usb@2000 { compatible = "brcm,bdc-v0.16"; - reg = <0x00002000 0x1000>; + reg = <0x0 0x00002000 0x0 0x1000>; interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbphy0 0>, <&usbphy0 1>; phy-names = "phy0", "phy1"; @@ -38,21 +38,21 @@ bdc0: usb@2000 {
usbphy1: usb-phy@10000 { compatible = "brcm,sr-usb-combo-phy"; - reg = <0x00010000 0x100>; + reg = <0x0 0x00010000 0x0 0x100>; #phy-cells = <1>; status = "disabled"; };
usbphy2: usb-phy@20000 { compatible = "brcm,sr-usb-hs-phy"; - reg = <0x00020000 0x100>; + reg = <0x0 0x00020000 0x0 0x100>; #phy-cells = <0>; status = "disabled"; };
xhci1: usb@11000 { compatible = "generic-xhci"; - reg = <0x00011000 0x1000>; + reg = <0x0 0x00011000 0x0 0x1000>; interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>; phy-names = "phy0", "phy1", "phy2"; @@ -62,7 +62,7 @@ xhci1: usb@11000 {
bdc1: usb@21000 { compatible = "brcm,bdc-v0.16"; - reg = <0x00021000 0x1000>; + reg = <0x0 0x00021000 0x0 0x1000>; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbphy2>; phy-names = "phy0";
From: Vineet Gupta vgupta@synopsys.com
[ Upstream commit e42404fa10fd11fe72d0a0e149a321d10e577715 ]
To start stack unwinding (SP, PC and BLINK) are needed. When the explicit execution context (pt_regs etc) is not available, unwinder assumes the task is sleeping (in __switch_to()) and fetches SP and BLINK from kernel mode stack.
But this assumption is not true, specially in a SMP system, when top runs on 1 core, there may be active running processes on all cores.
So when unwinding non courrent tasks, ensure they are NOT running.
And while at it, handle the self unwinding case explicitly.
This came out of investigation of a customer reported hang with rcutorture+top
Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/31 Signed-off-by: Vineet Gupta vgupta@synopsys.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arc/kernel/stacktrace.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c index b23986f984509..b2557f581ea8c 100644 --- a/arch/arc/kernel/stacktrace.c +++ b/arch/arc/kernel/stacktrace.c @@ -38,15 +38,15 @@
#ifdef CONFIG_ARC_DW2_UNWIND
-static void seed_unwind_frame_info(struct task_struct *tsk, - struct pt_regs *regs, - struct unwind_frame_info *frame_info) +static int +seed_unwind_frame_info(struct task_struct *tsk, struct pt_regs *regs, + struct unwind_frame_info *frame_info) { /* * synchronous unwinding (e.g. dump_stack) * - uses current values of SP and friends */ - if (tsk == NULL && regs == NULL) { + if (regs == NULL && (tsk == NULL || tsk == current)) { unsigned long fp, sp, blink, ret; frame_info->task = current;
@@ -65,11 +65,15 @@ static void seed_unwind_frame_info(struct task_struct *tsk, frame_info->call_frame = 0; } else if (regs == NULL) { /* - * Asynchronous unwinding of sleeping task - * - Gets SP etc from task's pt_regs (saved bottom of kernel - * mode stack of task) + * Asynchronous unwinding of a likely sleeping task + * - first ensure it is actually sleeping + * - if so, it will be in __switch_to, kernel mode SP of task + * is safe-kept and BLINK at a well known location in there */
+ if (tsk->state == TASK_RUNNING) + return -1; + frame_info->task = tsk;
frame_info->regs.r27 = TSK_K_FP(tsk); @@ -103,6 +107,8 @@ static void seed_unwind_frame_info(struct task_struct *tsk, frame_info->regs.r63 = regs->ret; frame_info->call_frame = 0; } + + return 0; }
#endif @@ -116,7 +122,8 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs, unsigned int address; struct unwind_frame_info frame_info;
- seed_unwind_frame_info(tsk, regs, &frame_info); + if (seed_unwind_frame_info(tsk, regs, &frame_info)) + return 0;
while (1) { address = UNW_PC(&frame_info);
From: Can Guo cang@codeaurora.org
[ Upstream commit 1699f980d87fb678a669490462cf0b9517c1fb47 ]
WB-related sysfs entries can be accessed even when an UFS device does not support the feature. The descriptors which are not supported by the UFS device may be wrongly reported when they are accessed from their corrsponding sysfs entries. Fix it by adding a sanity check of parameter offset against the actual decriptor length.
Link: https://lore.kernel.org/r/1603346348-14149-1-git-send-email-cang@codeaurora.... Reviewed-by: Asutosh Das asutoshd@codeaurora.org Acked-by: Daejun Park daejun7.park@samsung.com Signed-off-by: Can Guo cang@codeaurora.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufshcd.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 9dd32bb0ff2be..cbcdd79a1f76f 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -3163,13 +3163,19 @@ int ufshcd_read_desc_param(struct ufs_hba *hba, /* Get the length of descriptor */ ufshcd_map_desc_id_to_length(hba, desc_id, &buff_len); if (!buff_len) { - dev_err(hba->dev, "%s: Failed to get desc length", __func__); + dev_err(hba->dev, "%s: Failed to get desc length\n", __func__); + return -EINVAL; + } + + if (param_offset >= buff_len) { + dev_err(hba->dev, "%s: Invalid offset 0x%x in descriptor IDN 0x%x, length 0x%x\n", + __func__, param_offset, desc_id, buff_len); return -EINVAL; }
/* Check whether we need temp memory */ if (param_offset != 0 || param_size < buff_len) { - desc_buf = kmalloc(buff_len, GFP_KERNEL); + desc_buf = kzalloc(buff_len, GFP_KERNEL); if (!desc_buf) return -ENOMEM; } else { @@ -3183,14 +3189,14 @@ int ufshcd_read_desc_param(struct ufs_hba *hba, desc_buf, &buff_len);
if (ret) { - dev_err(hba->dev, "%s: Failed reading descriptor. desc_id %d, desc_index %d, param_offset %d, ret %d", + dev_err(hba->dev, "%s: Failed reading descriptor. desc_id %d, desc_index %d, param_offset %d, ret %d\n", __func__, desc_id, desc_index, param_offset, ret); goto out; }
/* Sanity check */ if (desc_buf[QUERY_DESC_DESC_TYPE_OFFSET] != desc_id) { - dev_err(hba->dev, "%s: invalid desc_id %d in descriptor header", + dev_err(hba->dev, "%s: invalid desc_id %d in descriptor header\n", __func__, desc_buf[QUERY_DESC_DESC_TYPE_OFFSET]); ret = -EINVAL; goto out; @@ -3200,12 +3206,12 @@ int ufshcd_read_desc_param(struct ufs_hba *hba, buff_len = desc_buf[QUERY_DESC_LENGTH_OFFSET]; ufshcd_update_desc_length(hba, desc_id, desc_index, buff_len);
- /* Check wherher we will not copy more data, than available */ - if (is_kmalloc && (param_offset + param_size) > buff_len) - param_size = buff_len - param_offset; - - if (is_kmalloc) + if (is_kmalloc) { + /* Make sure we don't copy more data than available */ + if (param_offset + param_size > buff_len) + param_size = buff_len - param_offset; memcpy(param_read_buf, &desc_buf[param_offset], param_size); + } out: if (is_kmalloc) kfree(desc_buf);
From: Can Guo cang@codeaurora.org
[ Upstream commit 73cc291c270248567245f084dcdf5078069af6b5 ]
If someone plays with the UFS clk scaling devfreq governor through sysfs, ufshcd_devfreq_scale may be called even when HBA is not runtime ACTIVE. This can lead to unexpected error. We cannot just protect it by calling pm_runtime_get_sync() because that may cause a race condition since HBA runtime suspend ops need to suspend clk scaling. To fix this call pm_runtime_get_noresume() and check HBA's runtime status. Only proceed if HBA is runtime ACTIVE, otherwise just bail.
governor_store devfreq_performance_handler update_devfreq devfreq_set_target ufshcd_devfreq_target ufshcd_devfreq_scale
Link: https://lore.kernel.org/r/1600758548-28576-1-git-send-email-cang@codeaurora.... Reviewed-by: Stanley Chu stanley.chu@mediatek.com Signed-off-by: Can Guo cang@codeaurora.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufshcd.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index cbcdd79a1f76f..18326eb772aeb 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -1279,8 +1279,15 @@ static int ufshcd_devfreq_target(struct device *dev, } spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+ pm_runtime_get_noresume(hba->dev); + if (!pm_runtime_active(hba->dev)) { + pm_runtime_put_noidle(hba->dev); + ret = -EAGAIN; + goto out; + } start = ktime_get(); ret = ufshcd_devfreq_scale(hba, scale_up); + pm_runtime_put(hba->dev);
trace_ufshcd_profile_clk_scaling(dev_name(hba->dev), (scale_up ? "up" : "down"),
From: Georgi Djakov georgi.djakov@linaro.org
[ Upstream commit c497f9322af947204c28292be6f20dd2d97483dd ]
Some nodes are incorrectly marked as RPM-controlled (they have RPM master and slave ids assigned), but are actually controlled by the application CPU instead. The RPM complains when we send requests for resources that it can't control. Let's fix this by replacing the IDs, with the default "-1" in which case no requests are sent.
Reviewed-by: Mike Tipton mdtipton@codeaurora.org Link: https://lore.kernel.org/r/20201112105140.10092-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov georgi.djakov@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/interconnect/qcom/msm8916.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/interconnect/qcom/msm8916.c b/drivers/interconnect/qcom/msm8916.c index 42c6c55816626..e8371d40ab8d8 100644 --- a/drivers/interconnect/qcom/msm8916.c +++ b/drivers/interconnect/qcom/msm8916.c @@ -182,7 +182,7 @@ DEFINE_QNODE(mas_pcnoc_sdcc_1, MSM8916_MASTER_SDCC_1, 8, -1, -1, MSM8916_PNOC_IN DEFINE_QNODE(mas_pcnoc_sdcc_2, MSM8916_MASTER_SDCC_2, 8, -1, -1, MSM8916_PNOC_INT_1); DEFINE_QNODE(mas_qdss_bam, MSM8916_MASTER_QDSS_BAM, 8, -1, -1, MSM8916_SNOC_QDSS_INT); DEFINE_QNODE(mas_qdss_etr, MSM8916_MASTER_QDSS_ETR, 8, -1, -1, MSM8916_SNOC_QDSS_INT); -DEFINE_QNODE(mas_snoc_cfg, MSM8916_MASTER_SNOC_CFG, 4, 20, -1, MSM8916_SNOC_QDSS_INT); +DEFINE_QNODE(mas_snoc_cfg, MSM8916_MASTER_SNOC_CFG, 4, -1, -1, MSM8916_SNOC_QDSS_INT); DEFINE_QNODE(mas_spdm, MSM8916_MASTER_SPDM, 4, -1, -1, MSM8916_PNOC_MAS_0); DEFINE_QNODE(mas_tcu0, MSM8916_MASTER_TCU0, 8, -1, -1, MSM8916_SLAVE_EBI_CH0, MSM8916_BIMC_SNOC_MAS, MSM8916_SLAVE_AMPSS_L2); DEFINE_QNODE(mas_tcu1, MSM8916_MASTER_TCU1, 8, -1, -1, MSM8916_SLAVE_EBI_CH0, MSM8916_BIMC_SNOC_MAS, MSM8916_SLAVE_AMPSS_L2); @@ -208,14 +208,14 @@ DEFINE_QNODE(pcnoc_snoc_mas, MSM8916_PNOC_SNOC_MAS, 8, 29, -1, MSM8916_PNOC_SNOC DEFINE_QNODE(pcnoc_snoc_slv, MSM8916_PNOC_SNOC_SLV, 8, -1, 45, MSM8916_SNOC_INT_0, MSM8916_SNOC_INT_BIMC, MSM8916_SNOC_INT_1); DEFINE_QNODE(qdss_int, MSM8916_SNOC_QDSS_INT, 8, -1, -1, MSM8916_SNOC_INT_0, MSM8916_SNOC_INT_BIMC); DEFINE_QNODE(slv_apps_l2, MSM8916_SLAVE_AMPSS_L2, 8, -1, -1, 0); -DEFINE_QNODE(slv_apss, MSM8916_SLAVE_APSS, 4, -1, 20, 0); +DEFINE_QNODE(slv_apss, MSM8916_SLAVE_APSS, 4, -1, -1, 0); DEFINE_QNODE(slv_audio, MSM8916_SLAVE_LPASS, 4, -1, -1, 0); DEFINE_QNODE(slv_bimc_cfg, MSM8916_SLAVE_BIMC_CFG, 4, -1, -1, 0); DEFINE_QNODE(slv_blsp_1, MSM8916_SLAVE_BLSP_1, 4, -1, -1, 0); DEFINE_QNODE(slv_boot_rom, MSM8916_SLAVE_BOOT_ROM, 4, -1, -1, 0); DEFINE_QNODE(slv_camera_cfg, MSM8916_SLAVE_CAMERA_CFG, 4, -1, -1, 0); -DEFINE_QNODE(slv_cats_0, MSM8916_SLAVE_CATS_128, 16, -1, 106, 0); -DEFINE_QNODE(slv_cats_1, MSM8916_SLAVE_OCMEM_64, 8, -1, 107, 0); +DEFINE_QNODE(slv_cats_0, MSM8916_SLAVE_CATS_128, 16, -1, -1, 0); +DEFINE_QNODE(slv_cats_1, MSM8916_SLAVE_OCMEM_64, 8, -1, -1, 0); DEFINE_QNODE(slv_clk_ctl, MSM8916_SLAVE_CLK_CTL, 4, -1, -1, 0); DEFINE_QNODE(slv_crypto_0_cfg, MSM8916_SLAVE_CRYPTO_0_CFG, 4, -1, -1, 0); DEFINE_QNODE(slv_dehr_cfg, MSM8916_SLAVE_DEHR_CFG, 4, -1, -1, 0); @@ -239,7 +239,7 @@ DEFINE_QNODE(slv_sdcc_2, MSM8916_SLAVE_SDCC_2, 4, -1, -1, 0); DEFINE_QNODE(slv_security, MSM8916_SLAVE_SECURITY, 4, -1, -1, 0); DEFINE_QNODE(slv_snoc_cfg, MSM8916_SLAVE_SNOC_CFG, 4, -1, -1, 0); DEFINE_QNODE(slv_spdm, MSM8916_SLAVE_SPDM, 4, -1, -1, 0); -DEFINE_QNODE(slv_srvc_snoc, MSM8916_SLAVE_SRVC_SNOC, 8, -1, 29, 0); +DEFINE_QNODE(slv_srvc_snoc, MSM8916_SLAVE_SRVC_SNOC, 8, -1, -1, 0); DEFINE_QNODE(slv_tcsr, MSM8916_SLAVE_TCSR, 4, -1, -1, 0); DEFINE_QNODE(slv_tlmm, MSM8916_SLAVE_TLMM, 4, -1, -1, 0); DEFINE_QNODE(slv_usb_hs, MSM8916_SLAVE_USB_HS, 4, -1, -1, 0); @@ -249,7 +249,7 @@ DEFINE_QNODE(snoc_bimc_0_slv, MSM8916_SNOC_BIMC_0_SLV, 8, -1, 24, MSM8916_SLAVE_ DEFINE_QNODE(snoc_bimc_1_mas, MSM8916_SNOC_BIMC_1_MAS, 16, -1, -1, MSM8916_SNOC_BIMC_1_SLV); DEFINE_QNODE(snoc_bimc_1_slv, MSM8916_SNOC_BIMC_1_SLV, 8, -1, -1, MSM8916_SLAVE_EBI_CH0); DEFINE_QNODE(snoc_int_0, MSM8916_SNOC_INT_0, 8, 99, 130, MSM8916_SLAVE_QDSS_STM, MSM8916_SLAVE_IMEM, MSM8916_SNOC_PNOC_MAS); -DEFINE_QNODE(snoc_int_1, MSM8916_SNOC_INT_1, 8, 100, 131, MSM8916_SLAVE_APSS, MSM8916_SLAVE_CATS_128, MSM8916_SLAVE_OCMEM_64); +DEFINE_QNODE(snoc_int_1, MSM8916_SNOC_INT_1, 8, -1, -1, MSM8916_SLAVE_APSS, MSM8916_SLAVE_CATS_128, MSM8916_SLAVE_OCMEM_64); DEFINE_QNODE(snoc_int_bimc, MSM8916_SNOC_INT_BIMC, 8, 101, 132, MSM8916_SNOC_BIMC_0_MAS); DEFINE_QNODE(snoc_pcnoc_mas, MSM8916_SNOC_PNOC_MAS, 8, -1, -1, MSM8916_SNOC_PNOC_SLV); DEFINE_QNODE(snoc_pcnoc_slv, MSM8916_SNOC_PNOC_SLV, 8, -1, -1, MSM8916_PNOC_INT_0);
From: Georgi Djakov georgi.djakov@linaro.org
[ Upstream commit 7ab1e9117607485df977bb6e271be5c5ad649a4c ]
The following errors are noticed during boot on a QCS404 board: [ 2.926647] qcom_icc_rpm_smd_send mas 6 error -6 [ 2.934573] qcom_icc_rpm_smd_send mas 8 error -6
These errors show when we try to configure the GPU and display nodes. Since these particular nodes aren't supported on RPM and are purely local, we should just change their mas_rpm_id to -1 to avoid any requests being sent for these master IDs.
Reviewed-by: Mike Tipton mdtipton@codeaurora.org Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20201118111044.26056-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov georgi.djakov@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/interconnect/qcom/qcs404.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/interconnect/qcom/qcs404.c b/drivers/interconnect/qcom/qcs404.c index d4769a5ea182e..9820709b43dbd 100644 --- a/drivers/interconnect/qcom/qcs404.c +++ b/drivers/interconnect/qcom/qcs404.c @@ -157,8 +157,8 @@ struct qcom_icc_desc { }
DEFINE_QNODE(mas_apps_proc, QCS404_MASTER_AMPSS_M0, 8, 0, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV); -DEFINE_QNODE(mas_oxili, QCS404_MASTER_GRAPHICS_3D, 8, 6, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV); -DEFINE_QNODE(mas_mdp, QCS404_MASTER_MDP_PORT0, 8, 8, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV); +DEFINE_QNODE(mas_oxili, QCS404_MASTER_GRAPHICS_3D, 8, -1, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV); +DEFINE_QNODE(mas_mdp, QCS404_MASTER_MDP_PORT0, 8, -1, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV); DEFINE_QNODE(mas_snoc_bimc_1, QCS404_SNOC_BIMC_1_MAS, 8, 76, -1, QCS404_SLAVE_EBI_CH0); DEFINE_QNODE(mas_tcu_0, QCS404_MASTER_TCU_0, 8, -1, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV); DEFINE_QNODE(mas_spdm, QCS404_MASTER_SPDM, 4, -1, -1, QCS404_PNOC_INT_3);
From: Yves-Alexis Perez corsac@corsac.net
[ Upstream commit f33d9e2b48a34e1558b67a473a1fc1d6e793f93c ]
Starting with iOS 14 released in September 2020, connectivity using the personal hotspot USB tethering function of iOS devices is broken.
Communication between the host and the device (for example ICMP traffic or DNS resolution using the DNS service running in the device itself) works fine, but communication to endpoints further away doesn't work.
Investigation on the matter shows that no UDP and ICMP traffic from the tethered host is reaching the Internet at all. For TCP traffic there are exchanges between tethered host and server but packets are modified in transit leading to impossible communication.
After some trials Matti Vuorela discovered that reducing the URB buffer size by two bytes restored the previous behavior. While a better solution might exist to fix the issue, since the protocol is not publicly documented and considering the small size of the fix, let's do that.
Tested-by: Matti Vuorela matti.vuorela@bitfactor.fi Signed-off-by: Yves-Alexis Perez corsac@corsac.net Link: https://lore.kernel.org/linux-usb/CAAn0qaXmysJ9vx3ZEMkViv_B19ju-_ExN8Yn_uSef... Link: https://github.com/libimobiledevice/libimobiledevice/issues/1038 Link: https://lore.kernel.org/r/20201119172439.94988-1-corsac@corsac.net Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/ipheth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c index b09b45382faf5..207e59e74935a 100644 --- a/drivers/net/usb/ipheth.c +++ b/drivers/net/usb/ipheth.c @@ -59,7 +59,7 @@ #define IPHETH_USBINTF_SUBCLASS 253 #define IPHETH_USBINTF_PROTO 1
-#define IPHETH_BUF_SIZE 1516 +#define IPHETH_BUF_SIZE 1514 #define IPHETH_IP_ALIGN 2 /* padding at front of URB */ #define IPHETH_TX_TIMEOUT (5 * HZ)
From: Jens Axboe axboe@kernel.dk
[ Upstream commit 5aac0390a63b8718237a61dd0d24a29201d1c94a ]
tun only checks the file O_NONBLOCK flag, but it should also be checking the iocb IOCB_NOWAIT flag. Any fops using ->read/write_iter() should check both, otherwise it breaks users that correctly expect O_NONBLOCK semantics if IOCB_NOWAIT is set.
Signed-off-by: Jens Axboe axboe@kernel.dk Link: https://lore.kernel.org/r/e9451860-96cc-c7c7-47b8-fe42cadd5f4c@kernel.dk Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/tun.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 7959b5c2d11f1..b5f47d37ea1be 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1979,12 +1979,15 @@ static ssize_t tun_chr_write_iter(struct kiocb *iocb, struct iov_iter *from) struct tun_file *tfile = file->private_data; struct tun_struct *tun = tun_get(tfile); ssize_t result; + int noblock = 0;
if (!tun) return -EBADFD;
- result = tun_get_user(tun, tfile, NULL, from, - file->f_flags & O_NONBLOCK, false); + if ((file->f_flags & O_NONBLOCK) || (iocb->ki_flags & IOCB_NOWAIT)) + noblock = 1; + + result = tun_get_user(tun, tfile, NULL, from, noblock, false);
tun_put(tun); return result; @@ -2203,10 +2206,15 @@ static ssize_t tun_chr_read_iter(struct kiocb *iocb, struct iov_iter *to) struct tun_file *tfile = file->private_data; struct tun_struct *tun = tun_get(tfile); ssize_t len = iov_iter_count(to), ret; + int noblock = 0;
if (!tun) return -EBADFD; - ret = tun_do_read(tun, tfile, to, file->f_flags & O_NONBLOCK, NULL); + + if ((file->f_flags & O_NONBLOCK) || (iocb->ki_flags & IOCB_NOWAIT)) + noblock = 1; + + ret = tun_do_read(tun, tfile, to, noblock, NULL); ret = min_t(ssize_t, ret, len); if (ret > 0) iocb->ki_pos = ret;
From: Lijun Pan ljp@linux.ibm.com
[ Upstream commit 855a631a4c11458a9cef1ab79c1530436aa95fae ]
Sometimes it takes longer than 5 seconds (watchdog timeout) to complete failover, migration, and other resets. In stead of scheduling another timeout reset, we wait for the current one to complete.
Suggested-by: Brian King brking@linux.vnet.ibm.com Signed-off-by: Lijun Pan ljp@linux.ibm.com Reviewed-by: Dany Madden drt@linux.ibm.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/ibm/ibmvnic.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 81ec233926acb..37012aa594f41 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2368,6 +2368,12 @@ static void ibmvnic_tx_timeout(struct net_device *dev, unsigned int txqueue) { struct ibmvnic_adapter *adapter = netdev_priv(dev);
+ if (test_bit(0, &adapter->resetting)) { + netdev_err(adapter->netdev, + "Adapter is resetting, skip timeout reset\n"); + return; + } + ibmvnic_reset(adapter, VNIC_RESET_TIMEOUT); }
From: Xu Qiang xuqiang36@huawei.com
[ Upstream commit 74cde1a53368aed4f2b4b54bf7030437f64a534b ]
On systems without HW-based collections (i.e. anything except GIC-500), we rely on firmware to perform the ITS save/restore. This doesn't really work, as although FW can properly save everything, it cannot fully restore the state of the command queue (the read-side is reset to the head of the queue). This results in the ITS consuming previously processed commands, potentially corrupting the state.
Instead, let's always save the ITS state on suspend, disabling it in the process, and restore the full state on resume. This saves us from broken FW as long as it doesn't enable the ITS by itself (for which we can't do anything).
This amounts to simply dropping the ITS_FLAGS_SAVE_SUSPEND_STATE.
Signed-off-by: Xu Qiang xuqiang36@huawei.com [maz: added warning on resume, rewrote commit message] Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20201107104226.14282-1-xuqiang36@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/irqchip/irq-gic-v3-its.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-)
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 548de7538632a..51b8743fdda03 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -42,7 +42,6 @@ #define ITS_FLAGS_CMDQ_NEEDS_FLUSHING (1ULL << 0) #define ITS_FLAGS_WORKAROUND_CAVIUM_22375 (1ULL << 1) #define ITS_FLAGS_WORKAROUND_CAVIUM_23144 (1ULL << 2) -#define ITS_FLAGS_SAVE_SUSPEND_STATE (1ULL << 3)
#define RDIST_FLAGS_PROPBASE_NEEDS_FLUSHING (1 << 0) #define RDIST_FLAGS_RD_TABLES_PREALLOCATED (1 << 1) @@ -4735,9 +4734,6 @@ static int its_save_disable(void) list_for_each_entry(its, &its_nodes, entry) { void __iomem *base;
- if (!(its->flags & ITS_FLAGS_SAVE_SUSPEND_STATE)) - continue; - base = its->base; its->ctlr_save = readl_relaxed(base + GITS_CTLR); err = its_force_quiescent(base); @@ -4756,9 +4752,6 @@ static int its_save_disable(void) list_for_each_entry_continue_reverse(its, &its_nodes, entry) { void __iomem *base;
- if (!(its->flags & ITS_FLAGS_SAVE_SUSPEND_STATE)) - continue; - base = its->base; writel_relaxed(its->ctlr_save, base + GITS_CTLR); } @@ -4778,9 +4771,6 @@ static void its_restore_enable(void) void __iomem *base; int i;
- if (!(its->flags & ITS_FLAGS_SAVE_SUSPEND_STATE)) - continue; - base = its->base;
/* @@ -4788,7 +4778,10 @@ static void its_restore_enable(void) * don't restore it since writing to CBASER or BASER<n> * registers is undefined according to the GIC v3 ITS * Specification. + * + * Firmware resuming with the ITS enabled is terminally broken. */ + WARN_ON(readl_relaxed(base + GITS_CTLR) & GITS_CTLR_ENABLE); ret = its_force_quiescent(base); if (ret) { pr_err("ITS@%pa: failed to quiesce on resume: %d\n", @@ -5068,9 +5061,6 @@ static int __init its_probe_one(struct resource *res, ctlr |= GITS_CTLR_ImDe; writel_relaxed(ctlr, its->base + GITS_CTLR);
- if (GITS_TYPER_HCC(typer)) - its->flags |= ITS_FLAGS_SAVE_SUSPEND_STATE; - err = its_init_domain(handle, its); if (err) goto out_free_tables;
From: Krzysztof Kozlowski krzk@kernel.org
[ Upstream commit e2d3d2e904ad3d381753798dcd5cae03e3c47242 ]
The Exynos DRM uses Common Clock Framework thus it cannot be built on platforms without it (e.g. compile test on MIPS with RALINK and SOC_RT305X):
/usr/bin/mips-linux-gnu-ld: drivers/gpu/drm/exynos/exynos_mixer.o: in function `mixer_bind': exynos_mixer.c:(.text+0x958): undefined reference to `clk_set_parent'
Reported-by: kernel test robot lkp@intel.com Signed-off-by: Krzysztof Kozlowski krzk@kernel.org Signed-off-by: Inki Dae inki.dae@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/exynos/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig index 6417f374b923a..951d5f708e92b 100644 --- a/drivers/gpu/drm/exynos/Kconfig +++ b/drivers/gpu/drm/exynos/Kconfig @@ -1,7 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only config DRM_EXYNOS tristate "DRM Support for Samsung SoC Exynos Series" - depends on OF && DRM && (ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_MULTIPLATFORM || COMPILE_TEST) + depends on OF && DRM && COMMON_CLK + depends on ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_MULTIPLATFORM || COMPILE_TEST depends on MMU select DRM_KMS_HELPER select VIDEOMODE_HELPERS
From: Ran Wang ran.wang_1@nxp.com
[ Upstream commit 71d80563b0760a411cd90a3680536f5d887fff6b ]
Given the case that bootloader(such as UEFI)'s FSPI driver might not handle all interrupts before loading kernel, those legacy interrupts would assert immidiately once kernel's FSPI driver enable them. Further, if it was FSPI_INTR_IPCMDDONE, the irq handler nxp_fspi_irq_handler() would call complete(&f->c) to notify others. However, f->c might not be initialized yet at that time, then cause kernel panic.
Of cause, we should fix this issue within bootloader. But it would be better to have this pacth to make dirver more robust (by clearing all interrupt status bits before enabling interrupts).
Suggested-by: Han Xu han.xu@nxp.com Signed-off-by: Ran Wang ran.wang_1@nxp.com Link: https://lore.kernel.org/r/20201123025715.14635-1-ran.wang_1@nxp.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-nxp-fspi.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c index 1ccda82da2063..158e09470898b 100644 --- a/drivers/spi/spi-nxp-fspi.c +++ b/drivers/spi/spi-nxp-fspi.c @@ -991,6 +991,7 @@ static int nxp_fspi_probe(struct platform_device *pdev) struct resource *res; struct nxp_fspi *f; int ret; + u32 reg;
ctlr = spi_alloc_master(&pdev->dev, sizeof(*f)); if (!ctlr) @@ -1017,6 +1018,12 @@ static int nxp_fspi_probe(struct platform_device *pdev) goto err_put_ctrl; }
+ /* Clear potential interrupts */ + reg = fspi_readl(f, f->iobase + FSPI_INTR); + if (reg) + fspi_writel(f, reg, f->iobase + FSPI_INTR); + + /* find the resources - controller memory mapped space */ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fspi_mmap"); if (!res) {
From: John Stultz john.stultz@linaro.org
[ Upstream commit 72b55c96f3a5ae6e486c20b5dacf5114060ed042 ]
Robin Murphy pointed out that if the arm-smmu driver probes before the qcom_scm driver, we may call qcom_scm_qsmmu500_wait_safe_toggle() before the __scm is initialized.
Now, getting this to happen is a bit contrived, as in my efforts it required enabling asynchronous probing for both drivers, moving the firmware dts node to the end of the dtsi file, as well as forcing a long delay in the qcom_scm_probe function.
With those tweaks we ran into the following crash: [ 2.631040] arm-smmu 15000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.633372] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... [ 2.633402] [0000000000000000] user address but active_mm is swapper [ 2.633409] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 2.633415] Modules linked in: [ 2.633427] CPU: 5 PID: 117 Comm: kworker/u16:2 Tainted: G W 5.10.0-rc1-mainline-00025-g272a618fc36-dirty #3971 [ 2.633430] Hardware name: Thundercomm Dragonboard 845c (DT) [ 2.633448] Workqueue: events_unbound async_run_entry_fn [ 2.633456] pstate: 80c00005 (Nzcv daif +PAN +UAO -TCO BTYPE=--) [ 2.633465] pc : qcom_scm_qsmmu500_wait_safe_toggle+0x78/0xb0 [ 2.633473] lr : qcom_smmu500_reset+0x58/0x78 [ 2.633476] sp : ffffffc0105a3b60 ... [ 2.633567] Call trace: [ 2.633572] qcom_scm_qsmmu500_wait_safe_toggle+0x78/0xb0 [ 2.633576] qcom_smmu500_reset+0x58/0x78 [ 2.633581] arm_smmu_device_reset+0x194/0x270 [ 2.633585] arm_smmu_device_probe+0xc94/0xeb8 [ 2.633592] platform_drv_probe+0x58/0xa8 [ 2.633597] really_probe+0xec/0x398 [ 2.633601] driver_probe_device+0x5c/0xb8 [ 2.633606] __driver_attach_async_helper+0x64/0x88 [ 2.633610] async_run_entry_fn+0x4c/0x118 [ 2.633617] process_one_work+0x20c/0x4b0 [ 2.633621] worker_thread+0x48/0x460 [ 2.633628] kthread+0x14c/0x158 [ 2.633634] ret_from_fork+0x10/0x18 [ 2.633642] Code: a9034fa0 d0007f73 29107fa0 91342273 (f9400020)
To avoid this, this patch adds a check on qcom_scm_is_available() in the qcom_smmu_impl_init() function, returning -EPROBE_DEFER if its not ready.
This allows the driver to try to probe again later after qcom_scm has finished probing.
Reported-by: Robin Murphy robin.murphy@arm.com Signed-off-by: John Stultz john.stultz@linaro.org Reviewed-by: Robin Murphy robin.murphy@arm.com Cc: Robin Murphy robin.murphy@arm.com Cc: Will Deacon will@kernel.org Cc: Andy Gross agross@kernel.org Cc: Maulik Shah mkshah@codeaurora.org Cc: Bjorn Andersson bjorn.andersson@linaro.org Cc: Saravana Kannan saravanak@google.com Cc: Marc Zyngier maz@kernel.org Cc: Lina Iyer ilina@codeaurora.org Cc: iommu@lists.linux-foundation.org Cc: linux-arm-msm linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20201112220520.48159-1-john.stultz@linaro.org Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c index be4318044f96c..702fbaa6c9ada 100644 --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c @@ -69,6 +69,10 @@ struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu) { struct qcom_smmu *qsmmu;
+ /* Check to make sure qcom_scm has finished probing */ + if (!qcom_scm_is_available()) + return ERR_PTR(-EPROBE_DEFER); + qsmmu = devm_kzalloc(smmu->dev, sizeof(*qsmmu), GFP_KERNEL); if (!qsmmu) return ERR_PTR(-ENOMEM);
From: Oded Gabbay ogabbay@kernel.org
[ Upstream commit 652b44453ea953d3157f02a7f17e18e329952649 ]
There is missing statement and missing "break;" in the ECC handling code in gaudi.c This will cause a wrong behavior upon certain ECC interrupts.
Signed-off-by: Oded Gabbay ogabbay@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/habanalabs/gaudi/gaudi.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index 2e55890ad6a61..8da1720357a26 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -5416,6 +5416,8 @@ static void gaudi_handle_ecc_event(struct hl_device *hdev, u16 event_type, params.num_memories = 33; params.derr = true; params.disable_clock_gating = true; + extract_info_from_fw = false; + break; default: return; }
From: Filipe Manana fdmanana@suse.com
[ Upstream commit 7aa6d359845a9dbf7ad90b0b1b6347ef4764621f ]
When adding or removing a qgroup relation we are doing a GFP_KERNEL allocation which is not safe because we are holding a transaction handle open and that can make us deadlock if the allocator needs to recurse into the filesystem. So just surround those calls with a nofs context.
Signed-off-by: Filipe Manana fdmanana@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/qgroup.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 9205a88f2a881..15c38803576ce 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -11,6 +11,7 @@ #include <linux/slab.h> #include <linux/workqueue.h> #include <linux/btrfs.h> +#include <linux/sched/mm.h>
#include "ctree.h" #include "transaction.h" @@ -1324,13 +1325,17 @@ int btrfs_add_qgroup_relation(struct btrfs_trans_handle *trans, u64 src, struct btrfs_qgroup *member; struct btrfs_qgroup_list *list; struct ulist *tmp; + unsigned int nofs_flag; int ret = 0;
/* Check the level of src and dst first */ if (btrfs_qgroup_level(src) >= btrfs_qgroup_level(dst)) return -EINVAL;
+ /* We hold a transaction handle open, must do a NOFS allocation. */ + nofs_flag = memalloc_nofs_save(); tmp = ulist_alloc(GFP_KERNEL); + memalloc_nofs_restore(nofs_flag); if (!tmp) return -ENOMEM;
@@ -1387,10 +1392,14 @@ static int __del_qgroup_relation(struct btrfs_trans_handle *trans, u64 src, struct btrfs_qgroup_list *list; struct ulist *tmp; bool found = false; + unsigned int nofs_flag; int ret = 0; int ret2;
+ /* We hold a transaction handle open, must do a NOFS allocation. */ + nofs_flag = memalloc_nofs_save(); tmp = ulist_alloc(GFP_KERNEL); + memalloc_nofs_restore(nofs_flag); if (!tmp) return -ENOMEM;
From: Filipe Manana fdmanana@suse.com
[ Upstream commit a855fbe69229078cd8aecd8974fb996a5ca651e6 ]
When running test case btrfs/017 from fstests, lockdep reported the following splat:
[ 1297.067385] ====================================================== [ 1297.067708] WARNING: possible circular locking dependency detected [ 1297.068022] 5.10.0-rc4-btrfs-next-73 #1 Not tainted [ 1297.068322] ------------------------------------------------------ [ 1297.068629] btrfs/189080 is trying to acquire lock: [ 1297.068929] ffff9f2725731690 (sb_internal#2){.+.+}-{0:0}, at: btrfs_quota_enable+0xaf/0xa70 [btrfs] [ 1297.069274] but task is already holding lock: [ 1297.069868] ffff9f2702b61a08 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_enable+0x3b/0xa70 [btrfs] [ 1297.070219] which lock already depends on the new lock.
[ 1297.071131] the existing dependency chain (in reverse order) is: [ 1297.071721] -> #1 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}: [ 1297.072375] lock_acquire+0xd8/0x490 [ 1297.072710] __mutex_lock+0xa3/0xb30 [ 1297.073061] btrfs_qgroup_inherit+0x59/0x6a0 [btrfs] [ 1297.073421] create_subvol+0x194/0x990 [btrfs] [ 1297.073780] btrfs_mksubvol+0x3fb/0x4a0 [btrfs] [ 1297.074133] __btrfs_ioctl_snap_create+0x119/0x1a0 [btrfs] [ 1297.074498] btrfs_ioctl_snap_create+0x58/0x80 [btrfs] [ 1297.074872] btrfs_ioctl+0x1a90/0x36f0 [btrfs] [ 1297.075245] __x64_sys_ioctl+0x83/0xb0 [ 1297.075617] do_syscall_64+0x33/0x80 [ 1297.075993] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1297.076380] -> #0 (sb_internal#2){.+.+}-{0:0}: [ 1297.077166] check_prev_add+0x91/0xc60 [ 1297.077572] __lock_acquire+0x1740/0x3110 [ 1297.077984] lock_acquire+0xd8/0x490 [ 1297.078411] start_transaction+0x3c5/0x760 [btrfs] [ 1297.078853] btrfs_quota_enable+0xaf/0xa70 [btrfs] [ 1297.079323] btrfs_ioctl+0x2c60/0x36f0 [btrfs] [ 1297.079789] __x64_sys_ioctl+0x83/0xb0 [ 1297.080232] do_syscall_64+0x33/0x80 [ 1297.080680] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1297.081139] other info that might help us debug this:
[ 1297.082536] Possible unsafe locking scenario:
[ 1297.083510] CPU0 CPU1 [ 1297.084005] ---- ---- [ 1297.084500] lock(&fs_info->qgroup_ioctl_lock); [ 1297.084994] lock(sb_internal#2); [ 1297.085485] lock(&fs_info->qgroup_ioctl_lock); [ 1297.085974] lock(sb_internal#2); [ 1297.086454] *** DEADLOCK *** [ 1297.087880] 3 locks held by btrfs/189080: [ 1297.088324] #0: ffff9f2725731470 (sb_writers#14){.+.+}-{0:0}, at: btrfs_ioctl+0xa73/0x36f0 [btrfs] [ 1297.088799] #1: ffff9f2702b60cc0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl+0x1f4d/0x36f0 [btrfs] [ 1297.089284] #2: ffff9f2702b61a08 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_enable+0x3b/0xa70 [btrfs] [ 1297.089771] stack backtrace: [ 1297.090662] CPU: 5 PID: 189080 Comm: btrfs Not tainted 5.10.0-rc4-btrfs-next-73 #1 [ 1297.091132] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 1297.092123] Call Trace: [ 1297.092629] dump_stack+0x8d/0xb5 [ 1297.093115] check_noncircular+0xff/0x110 [ 1297.093596] check_prev_add+0x91/0xc60 [ 1297.094076] ? kvm_clock_read+0x14/0x30 [ 1297.094553] ? kvm_sched_clock_read+0x5/0x10 [ 1297.095029] __lock_acquire+0x1740/0x3110 [ 1297.095510] lock_acquire+0xd8/0x490 [ 1297.095993] ? btrfs_quota_enable+0xaf/0xa70 [btrfs] [ 1297.096476] start_transaction+0x3c5/0x760 [btrfs] [ 1297.096962] ? btrfs_quota_enable+0xaf/0xa70 [btrfs] [ 1297.097451] btrfs_quota_enable+0xaf/0xa70 [btrfs] [ 1297.097941] ? btrfs_ioctl+0x1f4d/0x36f0 [btrfs] [ 1297.098429] btrfs_ioctl+0x2c60/0x36f0 [btrfs] [ 1297.098904] ? do_user_addr_fault+0x20c/0x430 [ 1297.099382] ? kvm_clock_read+0x14/0x30 [ 1297.099854] ? kvm_sched_clock_read+0x5/0x10 [ 1297.100328] ? sched_clock+0x5/0x10 [ 1297.100801] ? sched_clock_cpu+0x12/0x180 [ 1297.101272] ? __x64_sys_ioctl+0x83/0xb0 [ 1297.101739] __x64_sys_ioctl+0x83/0xb0 [ 1297.102207] do_syscall_64+0x33/0x80 [ 1297.102673] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1297.103148] RIP: 0033:0x7f773ff65d87
This is because during the quota enable ioctl we lock first the mutex qgroup_ioctl_lock and then start a transaction, and starting a transaction acquires a fs freeze semaphore (at the VFS level). However, every other code path, except for the quota disable ioctl path, we do the opposite: we start a transaction and then lock the mutex.
So fix this by making the quota enable and disable paths to start the transaction without having the mutex locked, and then, after starting the transaction, lock the mutex and check if some other task already enabled or disabled the quotas, bailing with success if that was the case.
Signed-off-by: Filipe Manana fdmanana@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/ctree.h | 5 ++++- fs/btrfs/qgroup.c | 57 ++++++++++++++++++++++++++++++++++++++++------- 2 files changed, 53 insertions(+), 9 deletions(-)
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 2f5ab8c47f506..c2e38516a931d 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -869,7 +869,10 @@ struct btrfs_fs_info { */ struct ulist *qgroup_ulist;
- /* protect user change for quota operations */ + /* + * Protect user change for quota operations. If a transaction is needed, + * it must be started before locking this lock. + */ struct mutex qgroup_ioctl_lock;
/* list of dirty qgroups to be written at next commit */ diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 15c38803576ce..e6786f5d8457f 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -937,6 +937,7 @@ int btrfs_quota_enable(struct btrfs_fs_info *fs_info) struct btrfs_key found_key; struct btrfs_qgroup *qgroup = NULL; struct btrfs_trans_handle *trans = NULL; + struct ulist *ulist = NULL; int ret = 0; int slot;
@@ -944,8 +945,8 @@ int btrfs_quota_enable(struct btrfs_fs_info *fs_info) if (fs_info->quota_root) goto out;
- fs_info->qgroup_ulist = ulist_alloc(GFP_KERNEL); - if (!fs_info->qgroup_ulist) { + ulist = ulist_alloc(GFP_KERNEL); + if (!ulist) { ret = -ENOMEM; goto out; } @@ -953,6 +954,22 @@ int btrfs_quota_enable(struct btrfs_fs_info *fs_info) ret = btrfs_sysfs_add_qgroups(fs_info); if (ret < 0) goto out; + + /* + * Unlock qgroup_ioctl_lock before starting the transaction. This is to + * avoid lock acquisition inversion problems (reported by lockdep) between + * qgroup_ioctl_lock and the vfs freeze semaphores, acquired when we + * start a transaction. + * After we started the transaction lock qgroup_ioctl_lock again and + * check if someone else created the quota root in the meanwhile. If so, + * just return success and release the transaction handle. + * + * Also we don't need to worry about someone else calling + * btrfs_sysfs_add_qgroups() after we unlock and getting an error because + * that function returns 0 (success) when the sysfs entries already exist. + */ + mutex_unlock(&fs_info->qgroup_ioctl_lock); + /* * 1 for quota root item * 1 for BTRFS_QGROUP_STATUS item @@ -962,12 +979,20 @@ int btrfs_quota_enable(struct btrfs_fs_info *fs_info) * would be a lot of overkill. */ trans = btrfs_start_transaction(tree_root, 2); + + mutex_lock(&fs_info->qgroup_ioctl_lock); if (IS_ERR(trans)) { ret = PTR_ERR(trans); trans = NULL; goto out; }
+ if (fs_info->quota_root) + goto out; + + fs_info->qgroup_ulist = ulist; + ulist = NULL; + /* * initially create the quota tree */ @@ -1125,11 +1150,14 @@ int btrfs_quota_enable(struct btrfs_fs_info *fs_info) if (ret) { ulist_free(fs_info->qgroup_ulist); fs_info->qgroup_ulist = NULL; - if (trans) - btrfs_end_transaction(trans); btrfs_sysfs_del_qgroups(fs_info); } mutex_unlock(&fs_info->qgroup_ioctl_lock); + if (ret && trans) + btrfs_end_transaction(trans); + else if (trans) + ret = btrfs_end_transaction(trans); + ulist_free(ulist); return ret; }
@@ -1142,19 +1170,29 @@ int btrfs_quota_disable(struct btrfs_fs_info *fs_info) mutex_lock(&fs_info->qgroup_ioctl_lock); if (!fs_info->quota_root) goto out; + mutex_unlock(&fs_info->qgroup_ioctl_lock);
/* * 1 For the root item * * We should also reserve enough items for the quota tree deletion in * btrfs_clean_quota_tree but this is not done. + * + * Also, we must always start a transaction without holding the mutex + * qgroup_ioctl_lock, see btrfs_quota_enable(). */ trans = btrfs_start_transaction(fs_info->tree_root, 1); + + mutex_lock(&fs_info->qgroup_ioctl_lock); if (IS_ERR(trans)) { ret = PTR_ERR(trans); + trans = NULL; goto out; }
+ if (!fs_info->quota_root) + goto out; + clear_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags); btrfs_qgroup_wait_for_completion(fs_info, false); spin_lock(&fs_info->qgroup_lock); @@ -1168,13 +1206,13 @@ int btrfs_quota_disable(struct btrfs_fs_info *fs_info) ret = btrfs_clean_quota_tree(trans, quota_root); if (ret) { btrfs_abort_transaction(trans, ret); - goto end_trans; + goto out; }
ret = btrfs_del_root(trans, "a_root->root_key); if (ret) { btrfs_abort_transaction(trans, ret); - goto end_trans; + goto out; }
list_del("a_root->dirty_list); @@ -1186,10 +1224,13 @@ int btrfs_quota_disable(struct btrfs_fs_info *fs_info)
btrfs_put_root(quota_root);
-end_trans: - ret = btrfs_end_transaction(trans); out: mutex_unlock(&fs_info->qgroup_ioctl_lock); + if (ret && trans) + btrfs_end_transaction(trans); + else if (trans) + ret = btrfs_end_transaction(trans); + return ret; }
From: Hao Si si.hao@zte.com.cn
[ Upstream commit 2663b3388551230cbc4606a40fabf3331ceb59e4 ]
The local variable 'cpumask_t mask' is in the stack memory, and its address is assigned to 'desc->affinity' in 'irq_set_affinity_hint()'. But the memory area where this variable is located is at risk of being modified.
During LTP testing, the following error was generated:
Unable to handle kernel paging request at virtual address ffff000012e9b790 Mem abort info: ESR = 0x96000007 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000007 CM = 0, WnR = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000075ac5e07 [ffff000012e9b790] pgd=00000027dbffe003, pud=00000027dbffd003, pmd=00000027b6d61003, pte=0000000000000000 Internal error: Oops: 96000007 [#1] PREEMPT SMP Modules linked in: xt_conntrack Process read_all (pid: 20171, stack limit = 0x0000000044ea4095) CPU: 14 PID: 20171 Comm: read_all Tainted: G B W Hardware name: NXP Layerscape LX2160ARDB (DT) pstate: 80000085 (Nzcv daIf -PAN -UAO) pc : irq_affinity_hint_proc_show+0x54/0xb0 lr : irq_affinity_hint_proc_show+0x4c/0xb0 sp : ffff00001138bc10 x29: ffff00001138bc10 x28: 0000ffffd131d1e0 x27: 00000000007000c0 x26: ffff8025b9480dc0 x25: ffff8025b9480da8 x24: 00000000000003ff x23: ffff8027334f8300 x22: ffff80272e97d000 x21: ffff80272e97d0b0 x20: ffff8025b9480d80 x19: ffff000009a49000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000040 x11: 0000000000000000 x10: ffff802735b79b88 x9 : 0000000000000000 x8 : 0000000000000000 x7 : ffff000009a49848 x6 : 0000000000000003 x5 : 0000000000000000 x4 : ffff000008157d6c x3 : ffff00001138bc10 x2 : ffff000012e9b790 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: irq_affinity_hint_proc_show+0x54/0xb0 seq_read+0x1b0/0x440 proc_reg_read+0x80/0xd8 __vfs_read+0x60/0x178 vfs_read+0x94/0x150 ksys_read+0x74/0xf0 __arm64_sys_read+0x24/0x30 el0_svc_common.constprop.0+0xd8/0x1a0 el0_svc_handler+0x34/0x88 el0_svc+0x10/0x14 Code: f9001bbf 943e0732 f94066c2 b4000062 (f9400041) ---[ end trace b495bdcb0b3b732b ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0,2-4,6,8,11,13-15 Kernel Offset: disabled CPU features: 0x0,21006008 Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception ]---
Fix it by using 'cpumask_of(cpu)' to get the cpumask.
Signed-off-by: Hao Si si.hao@zte.com.cn Signed-off-by: Lin Chen chen.lin5@zte.com.cn Signed-off-by: Yi Wang wang.yi59@zte.com.cn Signed-off-by: Li Yang leoyang.li@nxp.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/fsl/dpio/dpio-driver.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/soc/fsl/dpio/dpio-driver.c b/drivers/soc/fsl/dpio/dpio-driver.c index 7b642c330977f..7f397b4ad878d 100644 --- a/drivers/soc/fsl/dpio/dpio-driver.c +++ b/drivers/soc/fsl/dpio/dpio-driver.c @@ -95,7 +95,6 @@ static int register_dpio_irq_handlers(struct fsl_mc_device *dpio_dev, int cpu) { int error; struct fsl_mc_device_irq *irq; - cpumask_t mask;
irq = dpio_dev->irqs[0]; error = devm_request_irq(&dpio_dev->dev, @@ -112,9 +111,7 @@ static int register_dpio_irq_handlers(struct fsl_mc_device *dpio_dev, int cpu) }
/* set the affinity hint */ - cpumask_clear(&mask); - cpumask_set_cpu(cpu, &mask); - if (irq_set_affinity_hint(irq->msi_desc->irq, &mask)) + if (irq_set_affinity_hint(irq->msi_desc->irq, cpumask_of(cpu))) dev_err(&dpio_dev->dev, "irq_set_affinity failed irq %d cpu %d\n", irq->msi_desc->irq, cpu);
From: Peter Zijlstra peterz@infradead.org
[ Upstream commit 58c644ba512cfbc2e39b758dd979edd1d6d00e27 ]
We call arch_cpu_idle() with RCU disabled, but then use local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.
Switch all arch_cpu_idle() implementations to use raw_local_irq_{en,dis}able() and carefully manage the lockdep,rcu,tracing state like we do in entry.
(XXX: we really should change arch_cpu_idle() to not return with interrupts enabled)
Reported-by: Sven Schnelle svens@linux.ibm.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Reviewed-by: Mark Rutland mark.rutland@arm.com Tested-by: Mark Rutland mark.rutland@arm.com Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/alpha/kernel/process.c | 2 +- arch/arm/kernel/process.c | 2 +- arch/arm64/kernel/process.c | 2 +- arch/csky/kernel/process.c | 2 +- arch/h8300/kernel/process.c | 2 +- arch/hexagon/kernel/process.c | 2 +- arch/ia64/kernel/process.c | 2 +- arch/microblaze/kernel/process.c | 2 +- arch/mips/kernel/idle.c | 12 ++++++------ arch/nios2/kernel/process.c | 2 +- arch/openrisc/kernel/process.c | 2 +- arch/parisc/kernel/process.c | 2 +- arch/powerpc/kernel/idle.c | 4 ++-- arch/riscv/kernel/process.c | 2 +- arch/s390/kernel/idle.c | 6 +++--- arch/sh/kernel/idle.c | 2 +- arch/sparc/kernel/leon_pmc.c | 4 ++-- arch/sparc/kernel/process_32.c | 2 +- arch/sparc/kernel/process_64.c | 4 ++-- arch/um/kernel/process.c | 2 +- arch/x86/include/asm/mwait.h | 2 -- arch/x86/kernel/process.c | 12 +++++++----- kernel/sched/idle.c | 28 +++++++++++++++++++++++++++- 23 files changed, 64 insertions(+), 38 deletions(-)
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 7462a79110024..4c7b0414a3ff3 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -57,7 +57,7 @@ EXPORT_SYMBOL(pm_power_off); void arch_cpu_idle(void) { wtint(0); - local_irq_enable(); + raw_local_irq_enable(); }
void arch_cpu_idle_dead(void) diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 8e6ace03e960b..9f199b1e83839 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -71,7 +71,7 @@ void arch_cpu_idle(void) arm_pm_idle(); else cpu_do_idle(); - local_irq_enable(); + raw_local_irq_enable(); }
void arch_cpu_idle_prepare(void) diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 2da5f3f9d345f..f7c42a7d09b66 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -124,7 +124,7 @@ void arch_cpu_idle(void) * tricks */ cpu_do_idle(); - local_irq_enable(); + raw_local_irq_enable(); }
#ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/csky/kernel/process.c b/arch/csky/kernel/process.c index f730869e21eed..69af6bc87e647 100644 --- a/arch/csky/kernel/process.c +++ b/arch/csky/kernel/process.c @@ -102,6 +102,6 @@ void arch_cpu_idle(void) #ifdef CONFIG_CPU_PM_STOP asm volatile("stop\n"); #endif - local_irq_enable(); + raw_local_irq_enable(); } #endif diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c index 83ce3caf73139..a2961c7b2332c 100644 --- a/arch/h8300/kernel/process.c +++ b/arch/h8300/kernel/process.c @@ -57,7 +57,7 @@ asmlinkage void ret_from_kernel_thread(void); */ void arch_cpu_idle(void) { - local_irq_enable(); + raw_local_irq_enable(); __asm__("sleep"); }
diff --git a/arch/hexagon/kernel/process.c b/arch/hexagon/kernel/process.c index dfd322c5ce83a..20962601a1b47 100644 --- a/arch/hexagon/kernel/process.c +++ b/arch/hexagon/kernel/process.c @@ -44,7 +44,7 @@ void arch_cpu_idle(void) { __vmwait(); /* interrupts wake us up, but irqs are still disabled */ - local_irq_enable(); + raw_local_irq_enable(); }
/* diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index f19cb97c00987..1b2769260688d 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -252,7 +252,7 @@ void arch_cpu_idle(void) if (mark_idle) (*mark_idle)(1);
- safe_halt(); + raw_safe_halt();
if (mark_idle) (*mark_idle)(0); diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index a9e46e525cd0a..f99860771ff48 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -149,5 +149,5 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs)
void arch_cpu_idle(void) { - local_irq_enable(); + raw_local_irq_enable(); } diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 5bc3b04693c7d..18e69ebf5691d 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -33,19 +33,19 @@ static void __cpuidle r3081_wait(void) { unsigned long cfg = read_c0_conf(); write_c0_conf(cfg | R30XX_CONF_HALT); - local_irq_enable(); + raw_local_irq_enable(); }
static void __cpuidle r39xx_wait(void) { if (!need_resched()) write_c0_conf(read_c0_conf() | TX39_CONF_HALT); - local_irq_enable(); + raw_local_irq_enable(); }
void __cpuidle r4k_wait(void) { - local_irq_enable(); + raw_local_irq_enable(); __r4k_wait(); }
@@ -64,7 +64,7 @@ void __cpuidle r4k_wait_irqoff(void) " .set arch=r4000 \n" " wait \n" " .set pop \n"); - local_irq_enable(); + raw_local_irq_enable(); }
/* @@ -84,7 +84,7 @@ static void __cpuidle rm7k_wait_irqoff(void) " wait \n" " mtc0 $1, $12 # stalls until W stage \n" " .set pop \n"); - local_irq_enable(); + raw_local_irq_enable(); }
/* @@ -257,7 +257,7 @@ void arch_cpu_idle(void) if (cpu_wait) cpu_wait(); else - local_irq_enable(); + raw_local_irq_enable(); }
#ifdef CONFIG_CPU_IDLE diff --git a/arch/nios2/kernel/process.c b/arch/nios2/kernel/process.c index 88a4ec03edab4..f5cc55a88d310 100644 --- a/arch/nios2/kernel/process.c +++ b/arch/nios2/kernel/process.c @@ -33,7 +33,7 @@ EXPORT_SYMBOL(pm_power_off);
void arch_cpu_idle(void) { - local_irq_enable(); + raw_local_irq_enable(); }
/* diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c index 0ff391f00334c..3c98728cce249 100644 --- a/arch/openrisc/kernel/process.c +++ b/arch/openrisc/kernel/process.c @@ -79,7 +79,7 @@ void machine_power_off(void) */ void arch_cpu_idle(void) { - local_irq_enable(); + raw_local_irq_enable(); if (mfspr(SPR_UPR) & SPR_UPR_PMP) mtspr(SPR_PMR, mfspr(SPR_PMR) | SPR_PMR_DME); } diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index f196d96e2f9f5..a92a23d6acd93 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -169,7 +169,7 @@ void __cpuidle arch_cpu_idle_dead(void)
void __cpuidle arch_cpu_idle(void) { - local_irq_enable(); + raw_local_irq_enable();
/* nop on real hardware, qemu will idle sleep. */ asm volatile("or %%r10,%%r10,%%r10\n":::); diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index 422e31d2f5a2b..8df35f1329a42 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -60,9 +60,9 @@ void arch_cpu_idle(void) * interrupts enabled, some don't. */ if (irqs_disabled()) - local_irq_enable(); + raw_local_irq_enable(); } else { - local_irq_enable(); + raw_local_irq_enable(); /* * Go into low thread priority and possibly * low power mode. diff --git a/arch/riscv/kernel/process.c b/arch/riscv/kernel/process.c index 2b97c493427c9..308e1d95ecbf0 100644 --- a/arch/riscv/kernel/process.c +++ b/arch/riscv/kernel/process.c @@ -36,7 +36,7 @@ extern asmlinkage void ret_from_kernel_thread(void); void arch_cpu_idle(void) { wait_for_interrupt(); - local_irq_enable(); + raw_local_irq_enable(); }
void show_regs(struct pt_regs *regs) diff --git a/arch/s390/kernel/idle.c b/arch/s390/kernel/idle.c index f7f1e64e0d980..2b85096964f84 100644 --- a/arch/s390/kernel/idle.c +++ b/arch/s390/kernel/idle.c @@ -33,10 +33,10 @@ void enabled_wait(void) PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK; clear_cpu_flag(CIF_NOHZ_DELAY);
- local_irq_save(flags); + raw_local_irq_save(flags); /* Call the assembler magic in entry.S */ psw_idle(idle, psw_mask); - local_irq_restore(flags); + raw_local_irq_restore(flags);
/* Account time spent with enabled wait psw loaded as idle time. */ raw_write_seqcount_begin(&idle->seqcount); @@ -123,7 +123,7 @@ void arch_cpu_idle_enter(void) void arch_cpu_idle(void) { enabled_wait(); - local_irq_enable(); + raw_local_irq_enable(); }
void arch_cpu_idle_exit(void) diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c index 0dc0f52f9bb8d..f59814983bd59 100644 --- a/arch/sh/kernel/idle.c +++ b/arch/sh/kernel/idle.c @@ -22,7 +22,7 @@ static void (*sh_idle)(void); void default_idle(void) { set_bl_bit(); - local_irq_enable(); + raw_local_irq_enable(); /* Isn't this racy ? */ cpu_sleep(); clear_bl_bit(); diff --git a/arch/sparc/kernel/leon_pmc.c b/arch/sparc/kernel/leon_pmc.c index 065e2d4b72908..396f46bca52eb 100644 --- a/arch/sparc/kernel/leon_pmc.c +++ b/arch/sparc/kernel/leon_pmc.c @@ -50,7 +50,7 @@ static void pmc_leon_idle_fixup(void) register unsigned int address = (unsigned int)leon3_irqctrl_regs;
/* Interrupts need to be enabled to not hang the CPU */ - local_irq_enable(); + raw_local_irq_enable();
__asm__ __volatile__ ( "wr %%g0, %%asr19\n" @@ -66,7 +66,7 @@ static void pmc_leon_idle_fixup(void) static void pmc_leon_idle(void) { /* Interrupts need to be enabled to not hang the CPU */ - local_irq_enable(); + raw_local_irq_enable();
/* For systems without power-down, this will be no-op */ __asm__ __volatile__ ("wr %g0, %asr19\n\t"); diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c index adfcaeab3ddc5..a023637359154 100644 --- a/arch/sparc/kernel/process_32.c +++ b/arch/sparc/kernel/process_32.c @@ -74,7 +74,7 @@ void arch_cpu_idle(void) { if (sparc_idle) (*sparc_idle)(); - local_irq_enable(); + raw_local_irq_enable(); }
/* XXX cli/sti -> local_irq_xxx here, check this works once SMP is fixed. */ diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c index a75093b993f9a..6f8c7822fc065 100644 --- a/arch/sparc/kernel/process_64.c +++ b/arch/sparc/kernel/process_64.c @@ -62,11 +62,11 @@ void arch_cpu_idle(void) { if (tlb_type != hypervisor) { touch_nmi_watchdog(); - local_irq_enable(); + raw_local_irq_enable(); } else { unsigned long pstate;
- local_irq_enable(); + raw_local_irq_enable();
/* The sun4v sleeping code requires that we have PSTATE.IE cleared over * the cpu sleep hypervisor call. diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index 26b5e243d3fc0..495f101792b3d 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -217,7 +217,7 @@ void arch_cpu_idle(void) { cpu_tasks[current_thread_info()->cpu].pid = os_getpid(); um_idle_sleep(); - local_irq_enable(); + raw_local_irq_enable(); }
int __cant_sleep(void) { diff --git a/arch/x86/include/asm/mwait.h b/arch/x86/include/asm/mwait.h index e039a933aca3c..29dd27b5a339d 100644 --- a/arch/x86/include/asm/mwait.h +++ b/arch/x86/include/asm/mwait.h @@ -88,8 +88,6 @@ static inline void __mwaitx(unsigned long eax, unsigned long ebx,
static inline void __sti_mwait(unsigned long eax, unsigned long ecx) { - trace_hardirqs_on(); - mds_idle_clear_cpu_buffers(); /* "mwait %eax, %ecx;" */ asm volatile("sti; .byte 0x0f, 0x01, 0xc9;" diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index ba4593a913fab..145a7ac0c19aa 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -685,7 +685,7 @@ void arch_cpu_idle(void) */ void __cpuidle default_idle(void) { - safe_halt(); + raw_safe_halt(); } #if defined(CONFIG_APM_MODULE) || defined(CONFIG_HALTPOLL_CPUIDLE_MODULE) EXPORT_SYMBOL(default_idle); @@ -736,6 +736,8 @@ void stop_this_cpu(void *dummy) /* * AMD Erratum 400 aware idle routine. We handle it the same way as C3 power * states (local apic timer and TSC stop). + * + * XXX this function is completely buggered vs RCU and tracing. */ static void amd_e400_idle(void) { @@ -757,9 +759,9 @@ static void amd_e400_idle(void) * The switch back from broadcast mode needs to be called with * interrupts disabled. */ - local_irq_disable(); + raw_local_irq_disable(); tick_broadcast_exit(); - local_irq_enable(); + raw_local_irq_enable(); }
/* @@ -801,9 +803,9 @@ static __cpuidle void mwait_idle(void) if (!need_resched()) __sti_mwait(0, 0); else - local_irq_enable(); + raw_local_irq_enable(); } else { - local_irq_enable(); + raw_local_irq_enable(); } __current_clr_polling(); } diff --git a/kernel/sched/idle.c b/kernel/sched/idle.c index f324dc36fc43d..dee807ffad11b 100644 --- a/kernel/sched/idle.c +++ b/kernel/sched/idle.c @@ -78,7 +78,7 @@ void __weak arch_cpu_idle_dead(void) { } void __weak arch_cpu_idle(void) { cpu_idle_force_poll = 1; - local_irq_enable(); + raw_local_irq_enable(); }
/** @@ -94,9 +94,35 @@ void __cpuidle default_idle_call(void)
trace_cpu_idle(1, smp_processor_id()); stop_critical_timings(); + + /* + * arch_cpu_idle() is supposed to enable IRQs, however + * we can't do that because of RCU and tracing. + * + * Trace IRQs enable here, then switch off RCU, and have + * arch_cpu_idle() use raw_local_irq_enable(). Note that + * rcu_idle_enter() relies on lockdep IRQ state, so switch that + * last -- this is very similar to the entry code. + */ + trace_hardirqs_on_prepare(); + lockdep_hardirqs_on_prepare(_THIS_IP_); rcu_idle_enter(); + lockdep_hardirqs_on(_THIS_IP_); + arch_cpu_idle(); + + /* + * OK, so IRQs are enabled here, but RCU needs them disabled to + * turn itself back on.. funny thing is that disabling IRQs + * will cause tracing, which needs RCU. Jump through hoops to + * make it 'work'. + */ + raw_local_irq_disable(); + lockdep_hardirqs_off(_THIS_IP_); rcu_idle_exit(); + lockdep_hardirqs_on(_THIS_IP_); + raw_local_irq_enable(); + start_critical_timings(); trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id()); }
On Thu, Dec 03, 2020 at 08:28:21AM -0500, Sasha Levin wrote:
From: Peter Zijlstra peterz@infradead.org
[ Upstream commit 58c644ba512cfbc2e39b758dd979edd1d6d00e27 ]
We call arch_cpu_idle() with RCU disabled, but then use local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.
Switch all arch_cpu_idle() implementations to use raw_local_irq_{en,dis}able() and carefully manage the lockdep,rcu,tracing state like we do in entry.
(XXX: we really should change arch_cpu_idle() to not return with interrupts enabled)
Reported-by: Sven Schnelle svens@linux.ibm.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Reviewed-by: Mark Rutland mark.rutland@arm.com Tested-by: Mark Rutland mark.rutland@arm.com Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org Signed-off-by: Sasha Levin sashal@kernel.org
This patch broke s390 irq state tracing. A patch to fix this is scheduled to be merged upstream today (hopefully). Therefore I think this patch should not yet go into 5.9 stable.
On Thu, Dec 03, 2020 at 03:54:42PM +0100, Heiko Carstens wrote:
On Thu, Dec 03, 2020 at 08:28:21AM -0500, Sasha Levin wrote:
From: Peter Zijlstra peterz@infradead.org
[ Upstream commit 58c644ba512cfbc2e39b758dd979edd1d6d00e27 ]
We call arch_cpu_idle() with RCU disabled, but then use local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.
Switch all arch_cpu_idle() implementations to use raw_local_irq_{en,dis}able() and carefully manage the lockdep,rcu,tracing state like we do in entry.
(XXX: we really should change arch_cpu_idle() to not return with interrupts enabled)
Reported-by: Sven Schnelle svens@linux.ibm.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Reviewed-by: Mark Rutland mark.rutland@arm.com Tested-by: Mark Rutland mark.rutland@arm.com Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org Signed-off-by: Sasha Levin sashal@kernel.org
This patch broke s390 irq state tracing. A patch to fix this is scheduled to be merged upstream today (hopefully). Therefore I think this patch should not yet go into 5.9 stable.
Agreed.
On Thu, Dec 03, 2020 at 06:10:15PM +0100, Peter Zijlstra wrote:
On Thu, Dec 03, 2020 at 03:54:42PM +0100, Heiko Carstens wrote:
On Thu, Dec 03, 2020 at 08:28:21AM -0500, Sasha Levin wrote:
From: Peter Zijlstra peterz@infradead.org
[ Upstream commit 58c644ba512cfbc2e39b758dd979edd1d6d00e27 ]
We call arch_cpu_idle() with RCU disabled, but then use local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.
Switch all arch_cpu_idle() implementations to use raw_local_irq_{en,dis}able() and carefully manage the lockdep,rcu,tracing state like we do in entry.
(XXX: we really should change arch_cpu_idle() to not return with interrupts enabled)
Reported-by: Sven Schnelle svens@linux.ibm.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Reviewed-by: Mark Rutland mark.rutland@arm.com Tested-by: Mark Rutland mark.rutland@arm.com Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org Signed-off-by: Sasha Levin sashal@kernel.org
This patch broke s390 irq state tracing. A patch to fix this is scheduled to be merged upstream today (hopefully). Therefore I think this patch should not yet go into 5.9 stable.
Agreed.
I'll also grab b1cae1f84a0f ("s390: fix irq state tracing"). Thanks!
From: Peter Zijlstra peterz@infradead.org
[ Upstream commit 6e1d2bc675bd57640f5658a4a657ae488db4c204 ]
cpuidle->enter() callbacks should not call into tracing because RCU has already been disabled. Instead of doing the broadcast thing itself, simply advertise to the cpuidle core that those states stop the timer.
Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Acked-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Link: https://lkml.kernel.org/r/20201123143510.GR3021@hirez.programming.kicks-ass.... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/idle/intel_idle.c | 37 ++++++++++++++++++++----------------- 1 file changed, 20 insertions(+), 17 deletions(-)
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index d09b807e1c3a1..cc6d1b12388e1 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -122,26 +122,9 @@ static __cpuidle int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state = &drv->states[index]; unsigned long eax = flg2MWAIT(state->flags); unsigned long ecx = 1; /* break on interrupt flag */ - bool tick; - - if (!static_cpu_has(X86_FEATURE_ARAT)) { - /* - * Switch over to one-shot tick broadcast if the target C-state - * is deeper than C1. - */ - if ((eax >> MWAIT_SUBSTATE_SIZE) & MWAIT_CSTATE_MASK) { - tick = true; - tick_broadcast_enter(); - } else { - tick = false; - } - }
mwait_idle_with_hints(eax, ecx);
- if (!static_cpu_has(X86_FEATURE_ARAT) && tick) - tick_broadcast_exit(); - return index; }
@@ -1223,6 +1206,20 @@ static bool __init intel_idle_acpi_cst_extract(void) return false; }
+static bool __init intel_idle_state_needs_timer_stop(struct cpuidle_state *state) +{ + unsigned long eax = flg2MWAIT(state->flags); + + if (boot_cpu_has(X86_FEATURE_ARAT)) + return false; + + /* + * Switch over to one-shot tick broadcast if the target C-state + * is deeper than C1. + */ + return !!((eax >> MWAIT_SUBSTATE_SIZE) & MWAIT_CSTATE_MASK); +} + static void __init intel_idle_init_cstates_acpi(struct cpuidle_driver *drv) { int cstate, limit = min_t(int, CPUIDLE_STATE_MAX, acpi_state_table.count); @@ -1265,6 +1262,9 @@ static void __init intel_idle_init_cstates_acpi(struct cpuidle_driver *drv) if (disabled_states_mask & BIT(cstate)) state->flags |= CPUIDLE_FLAG_OFF;
+ if (intel_idle_state_needs_timer_stop(state)) + state->flags |= CPUIDLE_FLAG_TIMER_STOP; + state->enter = intel_idle; state->enter_s2idle = intel_idle_s2idle; } @@ -1503,6 +1503,9 @@ static void __init intel_idle_init_cstates_icpu(struct cpuidle_driver *drv) !(cpuidle_state_table[cstate].flags & CPUIDLE_FLAG_ALWAYS_ENABLE))) drv->states[drv->state_count].flags |= CPUIDLE_FLAG_OFF;
+ if (intel_idle_state_needs_timer_stop(&drv->states[drv->state_count])) + drv->states[drv->state_count].flags |= CPUIDLE_FLAG_TIMER_STOP; + drv->state_count++; }
On Thu, Dec 03, 2020 at 08:28:22AM -0500, Sasha Levin wrote:
From: Peter Zijlstra peterz@infradead.org
[ Upstream commit 6e1d2bc675bd57640f5658a4a657ae488db4c204 ]
cpuidle->enter() callbacks should not call into tracing because RCU has already been disabled. Instead of doing the broadcast thing itself, simply advertise to the cpuidle core that those states stop the timer.
Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Acked-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Link: https://lkml.kernel.org/r/20201123143510.GR3021@hirez.programming.kicks-ass.... Signed-off-by: Sasha Levin sashal@kernel.org
This patch has a known compile issue, fix is pending.
On Thu, Dec 03, 2020 at 06:10:35PM +0100, Peter Zijlstra wrote:
On Thu, Dec 03, 2020 at 08:28:22AM -0500, Sasha Levin wrote:
From: Peter Zijlstra peterz@infradead.org
[ Upstream commit 6e1d2bc675bd57640f5658a4a657ae488db4c204 ]
cpuidle->enter() callbacks should not call into tracing because RCU has already been disabled. Instead of doing the broadcast thing itself, simply advertise to the cpuidle core that those states stop the timer.
Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Acked-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Link: https://lkml.kernel.org/r/20201123143510.GR3021@hirez.programming.kicks-ass.... Signed-off-by: Sasha Levin sashal@kernel.org
This patch has a known compile issue, fix is pending.
I've also grabbed 4d916140bf28 ("intel_idle: Build fix"). Thanks!
From: Jon Hunter jonathanh@nvidia.com
[ Upstream commit fb319496935b7475a863a00c76895e8bb3216704 ]
Commit ff4c371d2bc0 ("arm64: defconfig: Build ADMA and ACONNECT driver") enable the Tegra ADMA and ACONNECT drivers and this is causing resume from system suspend to fail on Jetson TX2. Resume is failing because the ACONNECT driver is being resumed before the BPMP driver, and the ACONNECT driver is attempting to power on a power-domain that is provided by the BPMP. While a proper fix for the resume sequencing problem is identified, disable the ACONNECT for Jetson TX2 temporarily to avoid breaking system suspend.
Please note that ACONNECT driver is used by the Audio Processing Engine (APE) on Tegra, but because there is no mainline support for APE on Jetson TX2 currently, disabling the ACONNECT does not disable any useful feature at the moment.
Signed-off-by: Jon Hunter jonathanh@nvidia.com Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 12 ------------ 1 file changed, 12 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 802b8c52489ac..b5a23643db978 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -10,18 +10,6 @@ / { model = "NVIDIA Jetson TX2 Developer Kit"; compatible = "nvidia,p2771-0000", "nvidia,tegra186";
- aconnect { - status = "okay"; - - dma-controller@2930000 { - status = "okay"; - }; - - interrupt-controller@2a40000 { - status = "okay"; - }; - }; - i2c@3160000 { power-monitor@42 { compatible = "ti,ina3221";
From: Iakov 'Jake' Kirilenko jake.kirilenko@gmail.com
[ Upstream commit 15d89c9f6f4a186ade7aefbe77e7ede9746b6c47 ]
Tested on my P1 gen3, works fine with `thinkfan`. Since thinkpad_acpi fan control is off by default, it is safe to add 2nd fan control for brave overclockers
Signed-off-by: Iakov 'Jake' Kirilenko jake.kirilenko@gmail.com Link: https://lore.kernel.org/r/20201105152556.34073-1-jake.kirilenko@gmail.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/thinkpad_acpi.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 017f090a90f68..4a5bb86d341ee 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -8769,6 +8769,7 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = { TPACPI_Q_LNV3('N', '2', 'C', TPACPI_FAN_2CTL), /* P52 / P72 */ TPACPI_Q_LNV3('N', '2', 'E', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (1st gen) */ TPACPI_Q_LNV3('N', '2', 'O', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (2nd gen) */ + TPACPI_Q_LNV3('N', '2', 'V', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (3nd gen) */ };
static int __init fan_init(struct ibm_init_struct *iibm)
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit f2eae1888cf22590c38764b8fa3c989c0283870e ]
The Yoga 11e series has 2 accelerometers described by a BOSC0200 ACPI node. This setup relies on a Windows service which reads both accelerometers and then calculates the angle between the 2 halves to determine laptop / tent / tablet mode and then reports the calculated mode back to the EC by calling special ACPI methods on the BOSC0200 node.
The bmc150 iio driver does not support this (it involves double calculations requiring sqrt and arccos so this really needs to be done in userspace), as a result of this on the Yoga 11e the thinkpad_acpi code always reports SW_TABLET_MODE=0, starting with GNOME 3.38 reporting SW_TABLET_MODE=0 causes GNOME to:
1. Not show the onscreen keyboard when a text-input field is focussed with the touchscreen. 2. Disable accelerometer based auto display-rotation.
This makes sense when in laptop-mode but not when in tablet-mode. But since for the Yoga 11e the thinkpad_acpi code always reports SW_TABLET_MODE=0, GNOME does not know when the device is in tablet-mode.
Stop reporting the broken (always 0) SW_TABLET_MODE on Yoga 11e models to fix this.
Note there are plans for userspace to support 360 degree hinges style 2-in-1s with 2 accelerometers and figure out the mode by itself, see: https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/216
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20201106140130.46820-1-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/thinkpad_acpi.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 4a5bb86d341ee..cd7e782791c71 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -3214,7 +3214,14 @@ static int hotkey_init_tablet_mode(void)
in_tablet_mode = hotkey_gmms_get_tablet_mode(res, &has_tablet_mode); - if (has_tablet_mode) + /* + * The Yoga 11e series has 2 accelerometers described by a + * BOSC0200 ACPI node. This setup relies on a Windows service + * which calls special ACPI methods on this node to report + * the laptop/tent/tablet mode to the EC. The bmc150 iio driver + * does not support this, so skip the hotkey on these models. + */ + if (has_tablet_mode && !acpi_dev_present("BOSC0200", "1", -1)) tp_features.hotkey_tablet = TP_HOTKEY_TABLET_USES_GMMS; type = "GMMS"; } else if (acpi_evalf(hkey_handle, &res, "MHKG", "qd")) {
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit c986a7024916c92a775fc8d853fba3cae1d5fde4 ]
The Thinkpad Yoga 11e 4th gen with the N3450 / Celeron CPU only has one battery which is named BAT1 instead of the expected BAT0, add a quirk for this. This fixes not being able to set the charging tresholds on this model; and this alsoe fixes the following errors in dmesg:
ACPI: _SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error thinkpad_acpi: Error probing battery 2 battery: extension failed to load: ThinkPad Battery Extension battery: extension unregistered: ThinkPad Battery Extension
Note that the added quirk is for the "R0K" BIOS versions which are used on the Thinkpad Yoga 11e 4th gen's with a Celeron CPU, there is a separate "R0L" BIOS for the i3/i5 based versions. This may also need the same quirk, but if that really is necessary is unknown.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20201109103550.16265-1-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/thinkpad_acpi.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index cd7e782791c71..c7e9c0d29ed93 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -9704,6 +9704,7 @@ static const struct tpacpi_quirk battery_quirk_table[] __initconst = { TPACPI_Q_LNV3('R', '0', 'B', true), /* Thinkpad 11e gen 3 */ TPACPI_Q_LNV3('R', '0', 'C', true), /* Thinkpad 13 */ TPACPI_Q_LNV3('R', '0', 'J', true), /* Thinkpad 13 gen 2 */ + TPACPI_Q_LNV3('R', '0', 'K', true), /* Thinkpad 11e gen 4 celeron BIOS */ };
static int __init tpacpi_battery_init(struct ibm_init_struct *ibm)
From: Matthias Maier tamiko@43-1.org
[ Upstream commit 80a8c3185f5047dc7438ed226b72385bf93b4071 ]
This commit enables dual fan control for the following new Lenovo models: P15, P15v.
Signed-off-by: Matthias Maier tamiko@43-1.org Link: https://lore.kernel.org/r/20201126000416.2459645-2-tamiko-ibm-acpi-devel@43-... Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/thinkpad_acpi.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index c7e9c0d29ed93..55a94a2dc562e 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -8777,6 +8777,7 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = { TPACPI_Q_LNV3('N', '2', 'E', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (1st gen) */ TPACPI_Q_LNV3('N', '2', 'O', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (2nd gen) */ TPACPI_Q_LNV3('N', '2', 'V', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (3nd gen) */ + TPACPI_Q_LNV3('N', '3', '0', TPACPI_FAN_2CTL), /* P15 (1st gen) / P15v (1st gen) */ };
static int __init fan_init(struct ibm_init_struct *iibm)
From: Timo Witte timo.witte@gmail.com
[ Upstream commit 9e7a005ad56aa7d6ea5830c5ffcc60bf35de380b ]
Got a dmesg message on my AMD Renoir based Acer laptop: "acer_wmi: Unknown key number - 0x84" when toggling keyboard background light
Signed-off-by: Timo Witte timo.witte@gmail.com Reviewed-by: "Lee, Chun-Yi" jlee@suse.com Link: https://lore.kernel.org/r/20200804001423.36778-1-timo.witte@gmail.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/acer-wmi.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 49f4b73be513f..5592a929b5935 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -111,6 +111,7 @@ static const struct key_entry acer_wmi_keymap[] __initconst = { {KE_KEY, 0x64, {KEY_SWITCHVIDEOMODE} }, /* Display Switch */ {KE_IGNORE, 0x81, {KEY_SLEEP} }, {KE_KEY, 0x82, {KEY_TOUCHPAD_TOGGLE} }, /* Touch Pad Toggle */ + {KE_IGNORE, 0x84, {KEY_KBDILLUMTOGGLE} }, /* Automatic Keyboard background light toggle */ {KE_KEY, KEY_TOUCHPAD_ON, {KEY_TOUCHPAD_ON} }, {KE_KEY, KEY_TOUCHPAD_OFF, {KEY_TOUCHPAD_OFF} }, {KE_IGNORE, 0x83, {KEY_TOUCHPAD_TOGGLE} },
From: Max Verevkin me@maxverevkin.tk
[ Upstream commit 8b205d3e1bf52ab31cdd5c55f87c87a227793d84 ]
The Pavilion 13 x360 PC has a chassis-type which does not indicate it is a convertible, while it is actually a convertible. Add it to the dmi_switches_allow_list.
Signed-off-by: Max Verevkin me@maxverevkin.tk Link: https://lore.kernel.org/r/20201124131652.11165-1-me@maxverevkin.tk Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/intel-vbtn.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c index f5901b0b07cd8..0419c8001fe33 100644 --- a/drivers/platform/x86/intel-vbtn.c +++ b/drivers/platform/x86/intel-vbtn.c @@ -206,6 +206,12 @@ static const struct dmi_system_id dmi_switches_allow_list[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Stream x360 Convertible PC 11"), }, }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion 13 x360 PC"), + }, + }, {} /* Array terminator */ };
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 0f511edc6ac12f1ccf1c6c2d4412f5ed7ba426a6 ]
Add touchscreen info for the Predia Basic tablet.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Andy Shevchenko andy.shevchenko@gmail.com Link: https://lore.kernel.org/r/20201015194949.50566-1-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/touchscreen_dmi.c | 27 ++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index dda60f89c9512..26cbf7cc8129c 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -623,6 +623,23 @@ static const struct ts_dmi_data pov_mobii_wintab_p1006w_v10_data = { .properties = pov_mobii_wintab_p1006w_v10_props, };
+static const struct property_entry predia_basic_props[] = { + PROPERTY_ENTRY_U32("touchscreen-min-x", 3), + PROPERTY_ENTRY_U32("touchscreen-min-y", 10), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1728), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1144), + PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), + PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-predia-basic.fw"), + PROPERTY_ENTRY_U32("silead,max-fingers", 10), + PROPERTY_ENTRY_BOOL("silead,home-button"), + { } +}; + +static const struct ts_dmi_data predia_basic_data = { + .acpi_name = "MSSL1680:00", + .properties = predia_basic_props, +}; + static const struct property_entry schneider_sct101ctm_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1715), PROPERTY_ENTRY_U32("touchscreen-size-y", 1140), @@ -1109,6 +1126,16 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_BIOS_DATE, "10/24/2014"), }, }, + { + /* Predia Basic tablet) */ + .driver_data = (void *)&predia_basic_data, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), + DMI_MATCH(DMI_PRODUCT_NAME, "CherryTrail"), + /* Above matches are too generic, add bios-version match */ + DMI_MATCH(DMI_BIOS_VERSION, "Mx.WT107.KUBNGEA"), + }, + }, { /* Point of View mobii wintab p800w (v2.1) */ .driver_data = (void *)&pov_mobii_wintab_p800w_v21_data,
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit c9aa128080cbce92f8715a9328f88d8ca3134279 ]
Add touchscreen info for the Irbis TW118 tablet.
Reported-and-tested-by: russianneuromancer russianneuromancer@ya.ru Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20201124110454.114286-1-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/touchscreen_dmi.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 26cbf7cc8129c..5783139d0a119 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -295,6 +295,21 @@ static const struct ts_dmi_data irbis_tw90_data = { .properties = irbis_tw90_props, };
+static const struct property_entry irbis_tw118_props[] = { + PROPERTY_ENTRY_U32("touchscreen-min-x", 20), + PROPERTY_ENTRY_U32("touchscreen-min-y", 30), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1960), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1510), + PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-irbis-tw118.fw"), + PROPERTY_ENTRY_U32("silead,max-fingers", 10), + { } +}; + +static const struct ts_dmi_data irbis_tw118_data = { + .acpi_name = "MSSL1680:00", + .properties = irbis_tw118_props, +}; + static const struct property_entry itworks_tw891_props[] = { PROPERTY_ENTRY_U32("touchscreen-min-x", 1), PROPERTY_ENTRY_U32("touchscreen-min-y", 5), @@ -953,6 +968,14 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "TW90"), }, }, + { + /* Irbis TW118 */ + .driver_data = (void *)&irbis_tw118_data, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "IRBIS"), + DMI_MATCH(DMI_PRODUCT_NAME, "TW118"), + }, + }, { /* I.T.Works TW891 */ .driver_data = (void *)&itworks_tw891_data,
From: Pankaj Sharma pankj.sharma@samsung.com
[ Upstream commit 5c7d55bded77da6db7c5d249610e3a2eed730b3c ]
Add support for mcan bit timing and control mode according to bosch mcan IP version 3.3.0. The mcan version read from the Core Release field of CREL register would be 33. Accordingly the properties are to be set for mcan v3.3.0
Signed-off-by: Pankaj Sharma pankj.sharma@samsung.com Link: https://lore.kernel.org/r/1606366302-5520-1-git-send-email-pankj.sharma@sams... Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/m_can/m_can.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index d4030abad935d..61a93b1920379 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -1385,6 +1385,8 @@ static int m_can_dev_setup(struct m_can_classdev *m_can_dev) &m_can_data_bittiming_const_31X; break; case 32: + case 33: + /* Support both MCAN version v3.2.x and v3.3.0 */ m_can_dev->can.bittiming_const = m_can_dev->bit_timing ? m_can_dev->bit_timing : &m_can_bittiming_const_31X;
From: Oliver Hartkopp socketcan@hartkopp.net
[ Upstream commit d73ff9b7c4eacaba0fd956d14882bcae970f8307 ]
To detect potential bugs in CAN protocol implementations (double removal of receiver entries) a WARN() statement has been used if no matching list item was found for removal.
The fault injection issued by syzkaller was able to create a situation where the closing of a socket runs simultaneously to the notifier call chain for removing the CAN network device in use.
This case is very unlikely in real life but it doesn't break anything. Therefore we just replace the WARN() statement with pr_warn() to preserve the notification for the CAN protocol development.
Reported-by: syzbot+381d06e0c8eaacb8706f@syzkaller.appspotmail.com Reported-by: syzbot+d0ddd88c9a7432f041e6@syzkaller.appspotmail.com Reported-by: syzbot+76d62d3b8162883c7d11@syzkaller.appspotmail.com Signed-off-by: Oliver Hartkopp socketcan@hartkopp.net Link: https://lore.kernel.org/r/20201126192140.14350-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/can/af_can.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/can/af_can.c b/net/can/af_can.c index 0e71e0164ab3b..086a595caa5a7 100644 --- a/net/can/af_can.c +++ b/net/can/af_can.c @@ -541,10 +541,13 @@ void can_rx_unregister(struct net *net, struct net_device *dev, canid_t can_id,
/* Check for bugs in CAN protocol implementations using af_can.c: * 'rcv' will be NULL if no matching list item was found for removal. + * As this case may potentially happen when closing a socket while + * the notifier for removing the CAN netdev is running we just print + * a warning here. */ if (!rcv) { - WARN(1, "BUG: receive list entry not found for dev %s, id %03X, mask %03X\n", - DNAME(dev), can_id, mask); + pr_warn("can: receive list entry not found for dev %s, id %03X, mask %03X\n", + DNAME(dev), can_id, mask); goto out; }
linux-stable-mirror@lists.linaro.org
-
Heiko Carstens -
Peter Zijlstra -
Sasha Levin