From: Borislav Petkov bp@suse.de
[ Upstream commit 6c13d7ff81e6d2f01f62ccbfa49d1b8d87f274d0 ]
Those were only laptops and are very very unlikely to have ECC memory. Currently, when the driver attempts to load, it issues:
EDAC amd64: Error: F1 not found: device 0x1601 (broken BIOS?)
because the PCI device is the wrong one (it uses the F15h default one).
So do not load the driver on them as that is pointless.
Reported-by: Don Curtis bugrprt21882@online.de Signed-off-by: Borislav Petkov bp@suse.de Tested-by: Don Curtis bugrprt21882@online.de Link: http://bugzilla.opensuse.org/show_bug.cgi?id=1179763 Link: https://lkml.kernel.org/r/20201218160622.20146-1-bp@alien8.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/edac/amd64_edac.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 620f7041db6b5..b36d5879b91e0 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -3350,10 +3350,13 @@ static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt) fam_type = &family_types[F15_M60H_CPUS]; pvt->ops = &family_types[F15_M60H_CPUS].ops; break; + /* Richland is only client */ + } else if (pvt->model == 0x13) { + return NULL; + } else { + fam_type = &family_types[F15_CPUS]; + pvt->ops = &family_types[F15_CPUS].ops; } - - fam_type = &family_types[F15_CPUS]; - pvt->ops = &family_types[F15_CPUS].ops; break;
case 0x16: @@ -3547,6 +3550,7 @@ static int probe_one_instance(unsigned int nid) pvt->mc_node_id = nid; pvt->F3 = F3;
+ ret = -ENODEV; fam_type = per_family_init(pvt); if (!fam_type) goto err_enable;
From: Dinghao Liu dinghao.liu@zju.edu.cn
[ Upstream commit f31559af97a0eabd467e4719253675b7dccb8a46 ]
When fw_core_add_address_handler() fails, we need to destroy the port by tty_port_destroy(). Also we need to unregister the address handler by fw_core_remove_address_handler() on failure.
Signed-off-by: Dinghao Liu dinghao.liu@zju.edu.cn Link: https://lore.kernel.org/r/20201221122437.10274-1-dinghao.liu@zju.edu.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/fwserial/fwserial.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c index db83d34cd6779..c368082aae1aa 100644 --- a/drivers/staging/fwserial/fwserial.c +++ b/drivers/staging/fwserial/fwserial.c @@ -2189,6 +2189,7 @@ static int fwserial_create(struct fw_unit *unit) err = fw_core_add_address_handler(&port->rx_handler, &fw_high_memory_region); if (err) { + tty_port_destroy(&port->port); kfree(port); goto free_ports; } @@ -2271,6 +2272,7 @@ static int fwserial_create(struct fw_unit *unit)
free_ports: for (--i; i >= 0; --i) { + fw_core_remove_address_handler(&serial->ports[i]->rx_handler); tty_port_destroy(&serial->ports[i]->port); kfree(serial->ports[i]); }
From: Heiner Kallweit hkallweit1@gmail.com
[ Upstream commit 4b2d8ca9208be636b30e924b1cbcb267b0740c93 ]
On this system the M.2 PCIe WiFi card isn't detected after reboot, only after cold boot. reboot=pci fixes this behavior. In [0] the same issue is described, although on another system and with another Intel WiFi card. In case it's relevant, both systems have Celeron CPUs.
Add a PCI reboot quirk on affected systems until a more generic fix is available.
[0] https://bugzilla.kernel.org/show_bug.cgi?id=202399
[ bp: Massage commit message. ]
Signed-off-by: Heiner Kallweit hkallweit1@gmail.com Signed-off-by: Borislav Petkov bp@suse.de Link: https://lkml.kernel.org/r/1524eafd-f89c-cfa4-ed70-0bde9e45eec9@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/reboot.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index db115943e8bdc..9991c5920aace 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -477,6 +477,15 @@ static const struct dmi_system_id reboot_dmi_table[] __initconst = { }, },
+ { /* PCIe Wifi card isn't detected after reboot otherwise */ + .callback = set_pci_reboot, + .ident = "Zotac ZBOX CI327 nano", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "NA"), + DMI_MATCH(DMI_PRODUCT_NAME, "ZBOX-CI327NANO-GS-01"), + }, + }, + /* Sony */ { /* Handle problems with rebooting on Sony VGN-Z540N */ .callback = set_bios_reboot,
From: Jiri Slaby jslaby@suse.cz
[ Upstream commit 9777f8e60e718f7b022a94f2524f967d8def1931 ]
The constant 20 makes the font sum computation signed which can lead to sign extensions and signed wraps. It's not much of a problem as we build with -fno-strict-overflow. But if we ever decide not to, be ready, so switch the constant to unsigned.
Signed-off-by: Jiri Slaby jslaby@suse.cz Link: https://lore.kernel.org/r/20210105120239.28031-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/vt/consolemap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index 5d778c0aa0091..8ba0dc51a1f17 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -495,7 +495,7 @@ con_insert_unipair(struct uni_pagedir *p, u_short unicode, u_short fontpos)
p2[unicode & 0x3f] = fontpos; - p->sum += (fontpos << 20) + unicode; + p->sum += (fontpos << 20U) + unicode;
return 0; }
From: Tony Lindgren tony@atomide.com
[ Upstream commit cb88d01b67383a095e3f7caeb4cdade5a6cf0417 ]
We can currently get a "command execute failure 19" error on beacon loss if the signal is weak:
wlcore: Beacon loss detected. roles:0xff wlcore: Connection loss work (role_id: 0). ... wlcore: ERROR command execute failure 19 ... WARNING: CPU: 0 PID: 1552 at drivers/net/wireless/ti/wlcore/main.c:803 ... (wl12xx_queue_recovery_work.part.0 [wlcore]) (wl12xx_cmd_role_start_sta [wlcore]) (wl1271_op_bss_info_changed [wlcore]) (ieee80211_prep_connection [mac80211])
Error 19 is defined as CMD_STATUS_WRONG_NESTING from the wlcore firmware, and seems to mean that the firmware no longer wants to see the quirk handling for WLCORE_QUIRK_START_STA_FAILS done.
This quirk got added with commit 18eab430700d ("wlcore: workaround start_sta problem in wl12xx fw"), and it seems that this already got fixed in the firmware long time ago back in 2012 as wl18xx never had this quirk in place to start with.
As we no longer even support firmware that early, to me it seems that it's safe to just drop WLCORE_QUIRK_START_STA_FAILS to fix the error. Looks like earlier firmware got disabled back in 2013 with commit 0e284c074ef9 ("wl12xx: increase minimum singlerole firmware version required").
If it turns out we still need WLCORE_QUIRK_START_STA_FAILS with any firmware that the driver works with, we can simply revert this patch and add extra checks for firmware version used.
With this fix wlcore reconnects properly after a beacon loss.
Cc: Raz Bouganim r-bouganim@ti.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210115065613.7731-1-tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ti/wl12xx/main.c | 3 --- drivers/net/wireless/ti/wlcore/main.c | 15 +-------------- drivers/net/wireless/ti/wlcore/wlcore.h | 3 --- 3 files changed, 1 insertion(+), 20 deletions(-)
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 3c9c623bb4283..9d7dbfe7fe0c3 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -635,7 +635,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl) wl->quirks |= WLCORE_QUIRK_LEGACY_NVS | WLCORE_QUIRK_DUAL_PROBE_TMPL | WLCORE_QUIRK_TKIP_HEADER_SPACE | - WLCORE_QUIRK_START_STA_FAILS | WLCORE_QUIRK_AP_ZERO_SESSION_ID; wl->sr_fw_name = WL127X_FW_NAME_SINGLE; wl->mr_fw_name = WL127X_FW_NAME_MULTI; @@ -659,7 +658,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl) wl->quirks |= WLCORE_QUIRK_LEGACY_NVS | WLCORE_QUIRK_DUAL_PROBE_TMPL | WLCORE_QUIRK_TKIP_HEADER_SPACE | - WLCORE_QUIRK_START_STA_FAILS | WLCORE_QUIRK_AP_ZERO_SESSION_ID; wl->plt_fw_name = WL127X_PLT_FW_NAME; wl->sr_fw_name = WL127X_FW_NAME_SINGLE; @@ -688,7 +686,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl) wl->quirks |= WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN | WLCORE_QUIRK_DUAL_PROBE_TMPL | WLCORE_QUIRK_TKIP_HEADER_SPACE | - WLCORE_QUIRK_START_STA_FAILS | WLCORE_QUIRK_AP_ZERO_SESSION_ID;
wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER, diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 6863fd552d5e7..6e402d62dbe4a 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2872,21 +2872,8 @@ static int wlcore_join(struct wl1271 *wl, struct wl12xx_vif *wlvif)
if (is_ibss) ret = wl12xx_cmd_role_start_ibss(wl, wlvif); - else { - if (wl->quirks & WLCORE_QUIRK_START_STA_FAILS) { - /* - * TODO: this is an ugly workaround for wl12xx fw - * bug - we are not able to tx/rx after the first - * start_sta, so make dummy start+stop calls, - * and then call start_sta again. - * this should be fixed in the fw. - */ - wl12xx_cmd_role_start_sta(wl, wlvif); - wl12xx_cmd_role_stop_sta(wl, wlvif); - } - + else ret = wl12xx_cmd_role_start_sta(wl, wlvif); - }
return ret; } diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index b7821311ac75b..81c94d390623b 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -547,9 +547,6 @@ wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip, /* Each RX/TX transaction requires an end-of-transaction transfer */ #define WLCORE_QUIRK_END_OF_TRANSACTION BIT(0)
-/* the first start_role(sta) sometimes doesn't work on wl12xx */ -#define WLCORE_QUIRK_START_STA_FAILS BIT(1) - /* wl127x and SPI don't support SDIO block size alignment */ #define WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN BIT(2)
From: Claire Chang tientzu@chromium.org
[ Upstream commit 7f9f2c3f7d99b8ae773459c74ac5e99a0dd46db9 ]
Realtek Bluetooth controllers can do both LE scan and BR/EDR inquiry at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk.
Signed-off-by: Claire Chang tientzu@chromium.org Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bluetooth/hci_h5.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c index 78d635f1d1567..996729e78105a 100644 --- a/drivers/bluetooth/hci_h5.c +++ b/drivers/bluetooth/hci_h5.c @@ -906,6 +906,11 @@ static int h5_btrtl_setup(struct h5 *h5) /* Give the device some time before the hci-core sends it a reset */ usleep_range(10000, 20000);
+ /* Enable controller to do both LE scan and BR/EDR inquiry + * simultaneously. + */ + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks); + out_free: btrtl_free(btrtl_dev);
From: Vamshi K Sthambamkadi vamshi.k.sthambamkadi@gmail.com
[ Upstream commit 5ff20cbe6752a5bc06ff58fee8aa11a0d5075819 ]
kmemleak report: unreferenced object 0xffff9b1127f00500 (size 208): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 60 ed 05 11 9b ff ff 00 00 00 00 00 00 00 00 .`.............. backtrace: [<000000006ab3fd59>] kmem_cache_alloc_node+0x17a/0x480 [<0000000051a5f6f9>] __alloc_skb+0x5b/0x1d0 [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth] [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth] [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth] [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth] [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30 unreferenced object 0xffff9b1125c6ee00 (size 512): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 32 bytes): 04 00 00 00 0d 00 00 00 05 0c 01 00 11 9b ff ff ................ 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ backtrace: [<000000009f07c0cc>] slab_post_alloc_hook+0x59/0x270 [<0000000049431dc2>] __kmalloc_node_track_caller+0x15f/0x330 [<00000000027a42f6>] __kmalloc_reserve.isra.70+0x31/0x90 [<00000000e8e3e76a>] __alloc_skb+0x87/0x1d0 [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth] [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth] [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth] [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth] [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30 unreferenced object 0xffff9b112b395788 (size 8): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 8 bytes): 20 00 00 00 00 00 04 00 ....... backtrace: [<0000000052dc28d2>] kmem_cache_alloc_trace+0x15e/0x460 [<0000000046147591>] alloc_ctrl_urb+0x52/0xe0 [btusb] [<00000000a2ed3e9e>] btusb_send_frame+0x91/0x100 [btusb] [<000000001e66030e>] hci_send_frame+0x7e/0xf0 [bluetooth] [<00000000bf6b7269>] hci_cmd_work+0xc5/0x130 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30
In pm sleep-resume context, while the btusb device rebinds, it enters hci_unregister_dev(), whilst there is a possibility of hdev receiving PM_POST_SUSPEND suspend_notifier event, leading to generation of msg frames. When hci_unregister_dev() completes, i.e. hdev context is destroyed/freed, those intermittently sent msg frames cause memory leak.
BUG details: Below is stack trace of thread that enters hci_unregister_dev(), marks the hdev flag HCI_UNREGISTER to 1, and then goes onto to wait on notifier lock - refer unregister_pm_notifier().
hci_unregister_dev+0xa5/0x320 [bluetoot] btusb_disconnect+0x68/0x150 [btusb] usb_unbind_interface+0x77/0x250 ? kernfs_remove_by_name_ns+0x75/0xa0 device_release_driver_internal+0xfe/0x1 device_release_driver+0x12/0x20 bus_remove_device+0xe1/0x150 device_del+0x192/0x3e0 ? usb_remove_ep_devs+0x1f/0x30 usb_disable_device+0x92/0x1b0 usb_disconnect+0xc2/0x270 hub_event+0x9f6/0x15d0 ? rpm_idle+0x23/0x360 ? rpm_idle+0x26b/0x360 process_one_work+0x209/0x3b0 worker_thread+0x34/0x400 ? process_one_work+0x3b0/0x3b0 kthread+0x126/0x140 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30
Below is stack trace of thread executing hci_suspend_notifier() which processes the PM_POST_SUSPEND event, while the unbinding thread is waiting on lock.
hci_suspend_notifier.cold.39+0x5/0x2b [bluetooth] blocking_notifier_call_chain+0x69/0x90 pm_notifier_call_chain+0x1a/0x20 pm_suspend.cold.9+0x334/0x352 state_store+0x84/0xf0 kobj_attr_store+0x12/0x20 sysfs_kf_write+0x3b/0x40 kernfs_fop_write+0xda/0x1c0 vfs_write+0xbb/0x250 ksys_write+0x61/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x37/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix hci_suspend_notifer(), not to act on events when flag HCI_UNREGISTER is set.
Signed-off-by: Vamshi K Sthambamkadi vamshi.k.sthambamkadi@gmail.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/hci_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index c4aa2cbb92697..a8679cc468abc 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -3527,7 +3527,8 @@ static int hci_suspend_notifier(struct notifier_block *nb, unsigned long action, }
/* Suspend notifier should only act on events when powered. */ - if (!hdev_is_powered(hdev)) + if (!hdev_is_powered(hdev) || + hci_dev_test_flag(hdev, HCI_UNREGISTER)) goto done;
if (action == PM_SUSPEND_PREPARE) {
From: Ryder Lee ryder.lee@mediatek.com
[ Upstream commit a6275e934605646ef81b02d8d1164f21343149c9 ]
Reset token in mt7615_mac_reset_work() to avoid possible leakege.
Signed-off-by: Ryder Lee ryder.lee@mediatek.com Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/wireless/mediatek/mt76/mt7615/mac.c | 20 +++++++++++++++++++ .../wireless/mediatek/mt76/mt7615/mt7615.h | 2 +- .../wireless/mediatek/mt76/mt7615/pci_init.c | 12 +---------- 3 files changed, 22 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c index 3d62fda067e44..f1f954ff46856 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c @@ -2098,6 +2098,23 @@ void mt7615_dma_reset(struct mt7615_dev *dev) } EXPORT_SYMBOL_GPL(mt7615_dma_reset);
+void mt7615_tx_token_put(struct mt7615_dev *dev) +{ + struct mt76_txwi_cache *txwi; + int id; + + spin_lock_bh(&dev->token_lock); + idr_for_each_entry(&dev->token, txwi, id) { + mt7615_txp_skb_unmap(&dev->mt76, txwi); + if (txwi->skb) + dev_kfree_skb_any(txwi->skb); + mt76_put_txwi(&dev->mt76, txwi); + } + spin_unlock_bh(&dev->token_lock); + idr_destroy(&dev->token); +} +EXPORT_SYMBOL_GPL(mt7615_tx_token_put); + void mt7615_mac_reset_work(struct work_struct *work) { struct mt7615_phy *phy2; @@ -2141,6 +2158,9 @@ void mt7615_mac_reset_work(struct work_struct *work)
mt76_wr(dev, MT_MCU_INT_EVENT, MT_MCU_INT_EVENT_PDMA_STOPPED);
+ mt7615_tx_token_put(dev); + idr_init(&dev->token); + if (mt7615_wait_reset_state(dev, MT_MCU_CMD_RESET_DONE)) { mt7615_dma_reset(dev);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h index 6a9f9187f76ac..5b06294d654aa 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h @@ -619,7 +619,7 @@ int mt7615_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr, struct mt76_tx_info *tx_info);
void mt7615_tx_complete_skb(struct mt76_dev *mdev, struct mt76_queue_entry *e); - +void mt7615_tx_token_put(struct mt7615_dev *dev); void mt7615_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q, struct sk_buff *skb); void mt7615_sta_ps(struct mt76_dev *mdev, struct ieee80211_sta *sta, bool ps); diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c index 06a0f8f7bc893..7b81aef3684ed 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c @@ -153,9 +153,7 @@ int mt7615_register_device(struct mt7615_dev *dev)
void mt7615_unregister_device(struct mt7615_dev *dev) { - struct mt76_txwi_cache *txwi; bool mcu_running; - int id;
mcu_running = mt7615_wait_for_mcu_init(dev);
@@ -165,15 +163,7 @@ void mt7615_unregister_device(struct mt7615_dev *dev) mt7615_mcu_exit(dev); mt7615_dma_cleanup(dev);
- spin_lock_bh(&dev->token_lock); - idr_for_each_entry(&dev->token, txwi, id) { - mt7615_txp_skb_unmap(&dev->mt76, txwi); - if (txwi->skb) - dev_kfree_skb_any(txwi->skb); - mt76_put_txwi(&dev->mt76, txwi); - } - spin_unlock_bh(&dev->token_lock); - idr_destroy(&dev->token); + mt7615_tx_token_put(dev);
tasklet_disable(&dev->irq_tasklet);
From: Di Zhu zhudi21@huawei.com
[ Upstream commit 275b1e88cabb34dbcbe99756b67e9939d34a99b6 ]
pktgen create threads for all online cpus and bond these threads to relevant cpu repecivtily. when this thread firstly be woken up, it will compare cpu currently running with the cpu specified at the time of creation and if the two cpus are not equal, BUG_ON() will take effect causing panic on the system. Notice that these threads could be migrated to other cpus before start running because of the cpu hotplug after these threads have created. so the BUG_ON() used here seems unreasonable and we can replace it with WARN_ON() to just printf a warning other than panic the system.
Signed-off-by: Di Zhu zhudi21@huawei.com Link: https://lore.kernel.org/r/20210125124229.19334-1-zhudi21@huawei.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/pktgen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 105978604ffdb..3fba429f1f57b 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -3464,7 +3464,7 @@ static int pktgen_thread_worker(void *arg) struct pktgen_dev *pkt_dev = NULL; int cpu = t->cpu;
- BUG_ON(smp_processor_id() != cpu); + WARN_ON(smp_processor_id() != cpu);
init_waitqueue_head(&t->queue); complete(&t->start_done);
From: Miaoqing Pan miaoqing@codeaurora.org
[ Upstream commit b55379e343a3472c35f4a1245906db5158cab453 ]
Failed to transmit wmi management frames:
[84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full [84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28 [84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28 [84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28
This issue is caused by race condition between skb_dequeue and __skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a different lock: ar->data_lock vs list->lock, the result is no protection. So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt() running concurrently on different CPUs, there appear to be a rare corner cases when the queue length is 1,
CPUx (skb_deuque) CPUy (__skb_queue_tail) next=list prev=list struct sk_buff *skb = skb_peek(list); WRITE_ONCE(newsk->next, next); WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev); next = skb->next; WRITE_ONCE(next->prev, newsk); prev = skb->prev; WRITE_ONCE(prev->next, newsk); skb->next = skb->prev = NULL; list->qlen++; WRITE_ONCE(next->prev, prev); WRITE_ONCE(prev->next, next);
If the instruction ‘next = skb->next’ is executed before ‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the old ‘next’ pointer, but the length is still added by one. The final result is the length of the queue will reach the maximum value but the queue is empty.
So remove ar->data_lock, and use 'skb_queue_tail' instead of '__skb_queue_tail' to prevent the potential race condition. Also switch to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1
Signed-off-by: Miaoqing Pan miaoqing@codeaurora.org Reviewed-by: Brian Norris briannorris@chromium.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeauro... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath10k/mac.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 2e3eb5bbe49c8..ced664eaffb41 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -3763,23 +3763,16 @@ bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar) static int ath10k_mac_tx_wmi_mgmt(struct ath10k *ar, struct sk_buff *skb) { struct sk_buff_head *q = &ar->wmi_mgmt_tx_queue; - int ret = 0; - - spin_lock_bh(&ar->data_lock);
- if (skb_queue_len(q) == ATH10K_MAX_NUM_MGMT_PENDING) { + if (skb_queue_len_lockless(q) >= ATH10K_MAX_NUM_MGMT_PENDING) { ath10k_warn(ar, "wmi mgmt tx queue is full\n"); - ret = -ENOSPC; - goto unlock; + return -ENOSPC; }
- __skb_queue_tail(q, skb); + skb_queue_tail(q, skb); ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
-unlock: - spin_unlock_bh(&ar->data_lock); - - return ret; + return 0; }
static enum ath10k_mac_tx_path
From: Fangrui Song maskray@google.com
[ Upstream commit bb73d07148c405c293e576b40af37737faf23a6a ]
This is similar to commit
b21ebf2fb4cd ("x86: Treat R_X86_64_PLT32 as R_X86_64_PC32")
but for i386. As far as the kernel is concerned, R_386_PLT32 can be treated the same as R_386_PC32.
R_386_PLT32/R_X86_64_PLT32 are PC-relative relocation types which can only be used by branches. If the referenced symbol is defined externally, a PLT will be used.
R_386_PC32/R_X86_64_PC32 are PC-relative relocation types which can be used by address taking operations and branches. If the referenced symbol is defined externally, a copy relocation/canonical PLT entry will be created in the executable.
On x86-64, there is no PIC vs non-PIC PLT distinction and an R_X86_64_PLT32 relocation is produced for both `call/jmp foo` and `call/jmp foo@PLT` with newer (2018) GNU as/LLVM integrated assembler. This avoids canonical PLT entries (st_shndx=0, st_value!=0).
On i386, there are 2 types of PLTs, PIC and non-PIC. Currently, the GCC/GNU as convention is to use R_386_PC32 for non-PIC PLT and R_386_PLT32 for PIC PLT. Copy relocations/canonical PLT entries are possible ABI issues but GCC/GNU as will likely keep the status quo because (1) the ABI is legacy (2) the change will drop a GNU ld diagnostic for non-default visibility ifunc in shared objects.
clang-12 -fno-pic (since [1]) can emit R_386_PLT32 for compiler generated function declarations, because preventing canonical PLT entries is weighed over the rare ifunc diagnostic.
Further info for the more interested:
https://github.com/ClangBuiltLinux/linux/issues/1210 https://sourceware.org/bugzilla/show_bug.cgi?id=27169 https://github.com/llvm/llvm-project/commit/a084c0388e2a59b9556f2de008333323... [1]
[ bp: Massage commit message. ]
Reported-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Fangrui Song maskray@google.com Signed-off-by: Borislav Petkov bp@suse.de Reviewed-by: Nick Desaulniers ndesaulniers@google.com Reviewed-by: Nathan Chancellor natechancellor@gmail.com Tested-by: Nick Desaulniers ndesaulniers@google.com Tested-by: Nathan Chancellor natechancellor@gmail.com Tested-by: Sedat Dilek sedat.dilek@gmail.com Link: https://lkml.kernel.org/r/20210127205600.1227437-1-maskray@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/module.c | 1 + arch/x86/tools/relocs.c | 12 ++++++++---- 2 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c index 34b153cbd4acb..5e9a34b5bd741 100644 --- a/arch/x86/kernel/module.c +++ b/arch/x86/kernel/module.c @@ -114,6 +114,7 @@ int apply_relocate(Elf32_Shdr *sechdrs, *location += sym->st_value; break; case R_386_PC32: + case R_386_PLT32: /* Add the value, subtract its position */ *location += sym->st_value - (uint32_t)location; break; diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c index ce7188cbdae58..1c3a1962cade6 100644 --- a/arch/x86/tools/relocs.c +++ b/arch/x86/tools/relocs.c @@ -867,9 +867,11 @@ static int do_reloc32(struct section *sec, Elf_Rel *rel, Elf_Sym *sym, case R_386_PC32: case R_386_PC16: case R_386_PC8: + case R_386_PLT32: /* - * NONE can be ignored and PC relative relocations don't - * need to be adjusted. + * NONE can be ignored and PC relative relocations don't need + * to be adjusted. Because sym must be defined, R_386_PLT32 can + * be treated the same way as R_386_PC32. */ break;
@@ -910,9 +912,11 @@ static int do_reloc_real(struct section *sec, Elf_Rel *rel, Elf_Sym *sym, case R_386_PC32: case R_386_PC16: case R_386_PC8: + case R_386_PLT32: /* - * NONE can be ignored and PC relative relocations don't - * need to be adjusted. + * NONE can be ignored and PC relative relocations don't need + * to be adjusted. Because sym must be defined, R_386_PLT32 can + * be treated the same way as R_386_PC32. */ break;
From: Pali Rohár pali@kernel.org
[ Upstream commit f0b4f847673299577c29b71d3f3acd3c313d81b7 ]
The Ubiquiti U-Fiber Instant SFP GPON module has nonsensical information stored in its EEPROM. It claims to support all transceiver types including 10G Ethernet. Clear all claimed modes and set only 1000baseX_Full, which is the only one supported.
This module has also phys_id set to SFF, and the SFP subsystem currently does not allow to use SFP modules detected as SFFs. Add exception for this module so it can be detected as supported.
This change finally allows to detect and use SFP GPON module Ubiquiti U-Fiber Instant on Linux system.
EEPROM content of this SFP module is (where XX is serial number):
00: 02 04 0b ff ff ff ff ff ff ff ff 03 0c 00 14 c8 ???........??.?? 10: 00 00 00 00 55 42 4e 54 20 20 20 20 20 20 20 20 ....UBNT 20: 20 20 20 20 00 18 e8 29 55 46 2d 49 4e 53 54 41 .??)UF-INSTA 30: 4e 54 20 20 20 20 20 20 34 20 20 20 05 1e 00 36 NT 4 ??.6 40: 00 06 00 00 55 42 4e 54 XX XX XX XX XX XX XX XX .?..UBNTXXXXXXXX 50: 20 20 20 20 31 34 30 31 32 33 20 20 60 80 02 41 140123 `??A
Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/sfp-bus.c | 15 +++++++++++++++ drivers/net/phy/sfp.c | 17 +++++++++++++++-- 2 files changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 58014feedf6c8..fb954e8141802 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -44,6 +44,17 @@ static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id, phylink_set(modes, 2500baseX_Full); }
+static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id, + unsigned long *modes) +{ + /* Ubiquiti U-Fiber Instant module claims that support all transceiver + * types including 10G Ethernet which is not truth. So clear all claimed + * modes and set only one mode which module supports: 1000baseX_Full. + */ + phylink_zero(modes); + phylink_set(modes, 1000baseX_Full); +} + static const struct sfp_quirk sfp_quirks[] = { { // Alcatel Lucent G-010S-P can operate at 2500base-X, but @@ -63,6 +74,10 @@ static const struct sfp_quirk sfp_quirks[] = { .vendor = "HUAWEI", .part = "MA5671A", .modes = sfp_quirk_2500basex, + }, { + .vendor = "UBNT", + .part = "UF-INSTANT", + .modes = sfp_quirk_ubnt_uf_instant, }, };
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 34aa196b7465c..d8a809cf20c15 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -272,8 +272,21 @@ static const struct sff_data sff_data = {
static bool sfp_module_supported(const struct sfp_eeprom_id *id) { - return id->base.phys_id == SFF8024_ID_SFP && - id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP; + if (id->base.phys_id == SFF8024_ID_SFP && + id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP) + return true; + + /* SFP GPON module Ubiquiti U-Fiber Instant has in its EEPROM stored + * phys id SFF instead of SFP. Therefore mark this module explicitly + * as supported based on vendor name and pn match. + */ + if (id->base.phys_id == SFF8024_ID_SFF_8472 && + id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP && + !memcmp(id->base.vendor_name, "UBNT ", 16) && + !memcmp(id->base.vendor_pn, "UF-INSTANT ", 16)) + return true; + + return false; }
static const struct sff_data sfp_data = {
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 219991e6be7f4a31d471611e265b72f75b2d0538 ]
Some devices, e.g. the RTL8723BS bluetooth part, some USB attached devices, completely drop from the bus on a system-suspend. These devices will have their driver unbound and rebound on resume (when the dropping of the bus gets detected) and will show up as a new HCI after resume.
These devices do not benefit from the suspend / resume handling work done by the hci_suspend_notifier. At best this unnecessarily adds some time to the suspend/resume time. But this may also actually cause problems, if the code doing the driver unbinding runs after the pm-notifier then the hci_suspend_notifier code will try to talk to a device which is now in an uninitialized state.
This commit adds a new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk which allows drivers to opt-out of the hci_suspend_notifier when they know beforehand that their device will be fully re-initialized / reprobed on resume.
Signed-off-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Abhishek Pandit-Subedi abhishekpandit@chromium.org Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/bluetooth/hci.h | 8 ++++++++ net/bluetooth/hci_core.c | 18 +++++++++++------- 2 files changed, 19 insertions(+), 7 deletions(-)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index c8e67042a3b14..6da4b3c5dd55d 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -238,6 +238,14 @@ enum { * during the hdev->setup vendor callback. */ HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, + + /* + * When this quirk is set, then the hci_suspend_notifier is not + * registered. This is intended for devices which drop completely + * from the bus on system-suspend and which will show up as a new + * HCI after resume. + */ + HCI_QUIRK_NO_SUSPEND_NOTIFIER, };
/* HCI device flags */ diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index a8679cc468abc..211062a86a3a8 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -3783,10 +3783,12 @@ int hci_register_dev(struct hci_dev *hdev) hci_sock_dev_event(hdev, HCI_DEV_REG); hci_dev_hold(hdev);
- hdev->suspend_notifier.notifier_call = hci_suspend_notifier; - error = register_pm_notifier(&hdev->suspend_notifier); - if (error) - goto err_wqueue; + if (!test_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks)) { + hdev->suspend_notifier.notifier_call = hci_suspend_notifier; + error = register_pm_notifier(&hdev->suspend_notifier); + if (error) + goto err_wqueue; + }
queue_work(hdev->req_workqueue, &hdev->power_on);
@@ -3821,9 +3823,11 @@ void hci_unregister_dev(struct hci_dev *hdev)
cancel_work_sync(&hdev->power_on);
- hci_suspend_clear_tasks(hdev); - unregister_pm_notifier(&hdev->suspend_notifier); - cancel_work_sync(&hdev->suspend_prepare); + if (!test_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks)) { + hci_suspend_clear_tasks(hdev); + unregister_pm_notifier(&hdev->suspend_notifier); + cancel_work_sync(&hdev->suspend_prepare); + }
hci_dev_do_close(hdev);
From: Gopal Tiwari gtiwari@redhat.com
[ Upstream commit e8bd76ede155fd54d8c41d045dda43cd3174d506 ]
kernel panic trace looks like:
#5 [ffffb9e08698fc80] do_page_fault at ffffffffb666e0d7 #6 [ffffb9e08698fcb0] page_fault at ffffffffb70010fe [exception RIP: amp_read_loc_assoc_final_data+63] RIP: ffffffffc06ab54f RSP: ffffb9e08698fd68 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8c8845a5a000 RCX: 0000000000000004 RDX: 0000000000000000 RSI: ffff8c8b9153d000 RDI: ffff8c8845a5a000 RBP: ffffb9e08698fe40 R8: 00000000000330e0 R9: ffffffffc0675c94 R10: ffffb9e08698fe58 R11: 0000000000000001 R12: ffff8c8b9cbf6200 R13: 0000000000000000 R14: 0000000000000000 R15: ffff8c8b2026da0b ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb9e08698fda8] hci_event_packet at ffffffffc0676904 [bluetooth] #8 [ffffb9e08698fe50] hci_rx_work at ffffffffc06629ac [bluetooth] #9 [ffffb9e08698fe98] process_one_work at ffffffffb66f95e7
hcon->amp_mgr seems NULL triggered kernel panic in following line inside function amp_read_loc_assoc_final_data
set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state);
Fixed by checking NULL for mgr.
Signed-off-by: Gopal Tiwari gtiwari@redhat.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/amp.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/net/bluetooth/amp.c b/net/bluetooth/amp.c index 9c711f0dfae35..be2d469d6369d 100644 --- a/net/bluetooth/amp.c +++ b/net/bluetooth/amp.c @@ -297,6 +297,9 @@ void amp_read_loc_assoc_final_data(struct hci_dev *hdev, struct hci_request req; int err;
+ if (!mgr) + return; + cp.phy_handle = hcon->handle; cp.len_so_far = cpu_to_le16(0); cp.max_len = cpu_to_le16(hdev->amp_assoc_size);
From: Christian Gromm christian.gromm@microchip.com
[ Upstream commit 45b754ae5b82949dca2b6e74fa680313cefdc813 ]
This patch checks the function parameter 'bytes' before doing the subtraction to prevent memory corruption.
Signed-off-by: Christian Gromm christian.gromm@microchip.com Reported-by: Dan Carpenter dan.carpenter@oracle.com Link: https://lore.kernel.org/r/1612282865-21846-1-git-send-email-christian.gromm@... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/most/sound/sound.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/staging/most/sound/sound.c b/drivers/staging/most/sound/sound.c index 8a449ab9bdce4..b7666a7b1760a 100644 --- a/drivers/staging/most/sound/sound.c +++ b/drivers/staging/most/sound/sound.c @@ -96,6 +96,8 @@ static void swap_copy24(u8 *dest, const u8 *source, unsigned int bytes) { unsigned int i = 0;
+ if (bytes < 2) + return; while (i < bytes - 2) { dest[i] = source[i + 2]; dest[i + 1] = source[i + 1];
From: Juerg Haefliger juerg.haefliger@canonical.com
[ Upstream commit 4964a4300660d27907ceb655f219ac47e5941534 ]
Replace strcpy() with strscpy() in bcm2835-audio/bcm2835.c to prevent the following when loading snd-bcm2835:
[ 58.480634] ------------[ cut here ]------------ [ 58.485321] kernel BUG at lib/string.c:1149! [ 58.489650] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 58.495214] Modules linked in: snd_bcm2835(COE+) snd_pcm snd_timer snd dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc bcm2835_v4l2(CE) bcm2835_codec(CE) brcmfmac bcm2835_isp(CE) bcm2835_mmal_vchiq(CE) brcmutil cfg80211 v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops raspberrypi_hwmon videobuf2_v4l2 videobuf2_common videodev bcm2835_gpiomem mc vc_sm_cma(CE) rpivid_mem uio_pdrv_genirq uio sch_fq_codel drm ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear dwc2 roles spidev udc_core crct10dif_ce xhci_pci xhci_pci_renesas phy_generic aes_neon_bs aes_neon_blk crypto_simd cryptd [ 58.563787] CPU: 3 PID: 1959 Comm: insmod Tainted: G C OE 5.11.0-1001-raspi #1 [ 58.572172] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT) [ 58.578086] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 58.584178] pc : fortify_panic+0x20/0x24 [ 58.588161] lr : fortify_panic+0x20/0x24 [ 58.592136] sp : ffff800010a83990 [ 58.595491] x29: ffff800010a83990 x28: 0000000000000002 [ 58.600879] x27: ffffb0b07cb72928 x26: 0000000000000000 [ 58.606268] x25: ffff39e884973838 x24: ffffb0b07cb74190 [ 58.611655] x23: ffffb0b07cb72030 x22: 0000000000000000 [ 58.617042] x21: ffff39e884973014 x20: ffff39e88b793010 [ 58.622428] x19: ffffb0b07cb72670 x18: 0000000000000030 [ 58.627814] x17: 0000000000000000 x16: ffffb0b092ce2c1c [ 58.633200] x15: ffff39e88b901500 x14: 0720072007200720 [ 58.638588] x13: 0720072007200720 x12: 0720072007200720 [ 58.643979] x11: ffffb0b0936cbdf0 x10: 00000000fffff000 [ 58.649366] x9 : ffffb0b09220cfa8 x8 : 0000000000000000 [ 58.654752] x7 : ffffb0b093673df0 x6 : ffffb0b09364e000 [ 58.660140] x5 : 0000000000000000 x4 : ffff39e93b7db948 [ 58.665526] x3 : ffff39e93b7ebcf0 x2 : 0000000000000000 [ 58.670913] x1 : 0000000000000000 x0 : 0000000000000022 [ 58.676299] Call trace: [ 58.678775] fortify_panic+0x20/0x24 [ 58.682402] snd_bcm2835_alsa_probe+0x5b8/0x7d8 [snd_bcm2835] [ 58.688247] platform_probe+0x74/0xe4 [ 58.691963] really_probe+0xf0/0x510 [ 58.695585] driver_probe_device+0xe0/0x100 [ 58.699826] device_driver_attach+0xcc/0xd4 [ 58.704068] __driver_attach+0xb0/0x17c [ 58.707956] bus_for_each_dev+0x7c/0xd4 [ 58.711843] driver_attach+0x30/0x40 [ 58.715467] bus_add_driver+0x154/0x250 [ 58.719354] driver_register+0x84/0x140 [ 58.723242] __platform_driver_register+0x34/0x40 [ 58.728013] bcm2835_alsa_driver_init+0x30/0x1000 [snd_bcm2835] [ 58.734024] do_one_initcall+0x54/0x300 [ 58.737914] do_init_module+0x60/0x280 [ 58.741719] load_module+0x680/0x770 [ 58.745344] __do_sys_finit_module+0xbc/0x130 [ 58.749761] __arm64_sys_finit_module+0x2c/0x40 [ 58.754356] el0_svc_common.constprop.0+0x88/0x220 [ 58.759216] do_el0_svc+0x30/0xa0 [ 58.762575] el0_svc+0x28/0x70 [ 58.765669] el0_sync_handler+0x1a4/0x1b0 [ 58.769732] el0_sync+0x178/0x180 [ 58.773095] Code: aa0003e1 91366040 910003fd 97ffee21 (d4210000) [ 58.779275] ---[ end trace 29be5b17497bd898 ]--- [ 58.783955] note: insmod[1959] exited with preempt_count 1 [ 58.791921] ------------[ cut here ]------------
For the sake of it, replace all the other occurences of strcpy() under bcm2835-audio/ as well.
Signed-off-by: Juerg Haefliger juergh@canonical.com Link: https://lore.kernel.org/r/20210205072502.10907-1-juergh@canonical.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c | 6 +++--- drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 2 +- drivers/staging/vc04_services/bcm2835-audio/bcm2835.c | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c index 4c2cae99776b9..3703409715dab 100644 --- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c +++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c @@ -224,7 +224,7 @@ int snd_bcm2835_new_ctl(struct bcm2835_chip *chip) { int err;
- strcpy(chip->card->mixername, "Broadcom Mixer"); + strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername)); err = create_ctls(chip, ARRAY_SIZE(snd_bcm2835_ctl), snd_bcm2835_ctl); if (err < 0) return err; @@ -261,7 +261,7 @@ static const struct snd_kcontrol_new snd_bcm2835_headphones_ctl[] = {
int snd_bcm2835_new_headphones_ctl(struct bcm2835_chip *chip) { - strcpy(chip->card->mixername, "Broadcom Mixer"); + strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername)); return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_headphones_ctl), snd_bcm2835_headphones_ctl); } @@ -295,7 +295,7 @@ static const struct snd_kcontrol_new snd_bcm2835_hdmi[] = {
int snd_bcm2835_new_hdmi_ctl(struct bcm2835_chip *chip) { - strcpy(chip->card->mixername, "Broadcom Mixer"); + strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername)); return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_hdmi), snd_bcm2835_hdmi); } diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c index f783b632141b5..096f2c54258aa 100644 --- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c @@ -334,7 +334,7 @@ int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, const char *name,
pcm->private_data = chip; pcm->nonatomic = true; - strcpy(pcm->name, name); + strscpy(pcm->name, name, sizeof(pcm->name)); if (!spdif) { chip->dest = route; chip->volume = 0; diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c index cf5f80f5ca6b0..c250fbef2fa3d 100644 --- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c @@ -185,9 +185,9 @@ static int snd_add_child_device(struct device *dev, goto error; }
- strcpy(card->driver, audio_driver->driver.name); - strcpy(card->shortname, audio_driver->shortname); - strcpy(card->longname, audio_driver->longname); + strscpy(card->driver, audio_driver->driver.name, sizeof(card->driver)); + strscpy(card->shortname, audio_driver->shortname, sizeof(card->shortname)); + strscpy(card->longname, audio_driver->longname, sizeof(card->longname));
err = audio_driver->newpcm(chip, audio_driver->shortname, audio_driver->route,
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit af4b3a6f36d6c2fc5fca026bccf45e0fdcabddd9 ]
The Predia Basic tablet contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: brcmfmac43340-sdio.Insyde-CherryTrail.txt as nvram file which is a bit too generic.
Add a DMI quirk so that a unique and clearly identifiable nvram file name is used on the Predia Basic tablet.
Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210129171413.139880-1-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/wireless/broadcom/brcm80211/brcmfmac/dmi.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c index 4aa2561934d77..824a79f243830 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c @@ -40,6 +40,10 @@ static const struct brcmf_dmi_data pov_tab_p1006w_data = { BRCM_CC_43340_CHIP_ID, 2, "pov-tab-p1006w-data" };
+static const struct brcmf_dmi_data predia_basic_data = { + BRCM_CC_43341_CHIP_ID, 2, "predia-basic" +}; + static const struct dmi_system_id dmi_platform_data[] = { { /* ACEPC T8 Cherry Trail Z8350 mini PC */ @@ -111,6 +115,16 @@ static const struct dmi_system_id dmi_platform_data[] = { }, .driver_data = (void *)&pov_tab_p1006w_data, }, + { + /* Predia Basic tablet (+ with keyboard dock) */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), + DMI_MATCH(DMI_PRODUCT_NAME, "CherryTrail"), + /* Mx.WT107.KUBNGEA02 with the version-nr dropped */ + DMI_MATCH(DMI_BIOS_VERSION, "Mx.WT107.KUBNGEA"), + }, + .driver_data = (void *)&predia_basic_data, + }, {} };
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit a338c874d3d9d2463f031e89ae14942929b93db6 ]
The Voyo winpad A15 tablet contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: rcmfmac4330-sdio.To be filled by O.E.M.-To be filled by O.E.M..txt as nvram file which is a bit too generic.
Add a DMI quirk so that a unique and clearly identifiable nvram file name is used on the Voyo winpad A15 tablet.
While preparing a matching linux-firmware update I noticed that the nvram is identical to the nvram used on the Prowise-PT301 tablet, so the new DMI quirk entry simply points to the already existing Prowise-PT301 nvram file.
Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210129171413.139880-2-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../wireless/broadcom/brcm80211/brcmfmac/dmi.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c index 824a79f243830..6d5188b78f2de 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c @@ -44,6 +44,14 @@ static const struct brcmf_dmi_data predia_basic_data = { BRCM_CC_43341_CHIP_ID, 2, "predia-basic" };
+/* Note the Voyo winpad A15 tablet uses the same Ampak AP6330 module, with the + * exact same nvram file as the Prowise-PT301 tablet. Since the nvram for the + * Prowise-PT301 is already in linux-firmware we just point to that here. + */ +static const struct brcmf_dmi_data voyo_winpad_a15_data = { + BRCM_CC_4330_CHIP_ID, 4, "Prowise-PT301" +}; + static const struct dmi_system_id dmi_platform_data[] = { { /* ACEPC T8 Cherry Trail Z8350 mini PC */ @@ -125,6 +133,16 @@ static const struct dmi_system_id dmi_platform_data[] = { }, .driver_data = (void *)&predia_basic_data, }, + { + /* Voyo winpad A15 tablet */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), + /* Above strings are too generic, also match on BIOS date */ + DMI_MATCH(DMI_BIOS_DATE, "11/20/2014"), + }, + .driver_data = (void *)&voyo_winpad_a15_data, + }, {} };
From: Tian Tao tiantao6@hisilicon.com
[ Upstream commit c855af2f9c5c60760fd1bed7889a81bc37d2591d ]
Fix the problem of dev being released twice. ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 75 PID: 15700 at lib/refcount.c:28 refcount_warn_saturate+0xd4/0x150 CPU: 75 PID: 15700 Comm: rmmod Tainted: G E 5.10.0-rc3+ #3 Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019 pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--) pc : refcount_warn_saturate+0xd4/0x150 lr : refcount_warn_saturate+0xd4/0x150 sp : ffff2028150cbc00 x29: ffff2028150cbc00 x28: ffff2028150121c0 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000003 x23: 0000000000000000 x22: ffff2028150cbc90 x21: ffff2020038a30a8 x20: ffff2028150cbc90 x19: ffff0020cd938020 x18: 0000000000000010 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffffffffffff x14: ffff2028950cb88f x13: ffff2028150cb89d x12: 0000000000000000 x11: 0000000005f5e0ff x10: ffff2028150cb800 x9 : 00000000ffffffd0 x8 : 75203b776f6c6672 x7 : ffff800011a6f7c8 x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff202ffe2f9dc0 x1 : ffffa02fecf40000 x0 : 0000000000000026 Call trace: refcount_warn_saturate+0xd4/0x150 devm_drm_dev_init_release+0x50/0x70 devm_action_release+0x20/0x30 release_nodes+0x13c/0x218 devres_release_all+0x80/0x170 device_release_driver_internal+0x128/0x1f0 driver_detach+0x6c/0xe0 bus_remove_driver+0x74/0x100 driver_unregister+0x34/0x60 pci_unregister_driver+0x24/0xd8 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm] __arm64_sys_delete_module+0x1fc/0x2d0 el0_svc_common.constprop.3+0xa8/0x188 do_el0_svc+0x80/0xa0 el0_sync_handler+0x8c/0xb0 el0_sync+0x15c/0x180 CPU: 75 PID: 15700 Comm: rmmod Tainted: G E 5.10.0-rc3+ #3 Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019 Call trace: dump_backtrace+0x0/0x208 show_stack+0x2c/0x40 dump_stack+0xd8/0x10c __warn+0xac/0x128 report_bug+0xcc/0x180 bug_handler+0x24/0x78 call_break_hook+0x80/0xa0 brk_handler+0x28/0x68 do_debug_exception+0x9c/0x148 el1_sync_handler+0x7c/0x128 el1_sync+0x80/0x100 refcount_warn_saturate+0xd4/0x150 devm_drm_dev_init_release+0x50/0x70 devm_action_release+0x20/0x30 release_nodes+0x13c/0x218 devres_release_all+0x80/0x170 device_release_driver_internal+0x128/0x1f0 driver_detach+0x6c/0xe0 bus_remove_driver+0x74/0x100 driver_unregister+0x34/0x60 pci_unregister_driver+0x24/0xd8 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm] __arm64_sys_delete_module+0x1fc/0x2d0 el0_svc_common.constprop.3+0xa8/0x188 do_el0_svc+0x80/0xa0 el0_sync_handler+0x8c/0xb0 el0_sync+0x15c/0x180 ---[ end trace 00718630d6e5ff18 ]---
Signed-off-by: Tian Tao tiantao6@hisilicon.com Acked-by: Thomas Zimmermann tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/1607941973-32287-1-git-send-em... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c index 085d1b2fa8c0a..d3485f742acc2 100644 --- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c @@ -368,7 +368,6 @@ static void hibmc_pci_remove(struct pci_dev *pdev)
drm_dev_unregister(dev); hibmc_unload(dev); - drm_dev_put(dev); }
static struct pci_device_id hibmc_pci_table[] = {
From: Zqiang qiang.zhang@windriver.com
[ Upstream commit 5c0e4110f751934e748a66887c61f8e73805f0f9 ]
The dlfb_alloc_urb_list function is called in dlfb_usb_probe function, after that if an error occurs, the dlfb_free_urb_list function need to be called.
BUG: memory leak unreferenced object 0xffff88810adde100 (size 32): comm "kworker/1:0", pid 17, jiffies 4294947788 (age 19.520s) hex dump (first 32 bytes): 10 30 c3 0d 81 88 ff ff c0 fa 63 12 81 88 ff ff .0........c..... 00 30 c3 0d 81 88 ff ff 80 d1 3a 08 81 88 ff ff .0........:..... backtrace: [<0000000019512953>] kmalloc include/linux/slab.h:552 [inline] [<0000000019512953>] kzalloc include/linux/slab.h:664 [inline] [<0000000019512953>] dlfb_alloc_urb_list drivers/video/fbdev/udlfb.c:1892 [inline] [<0000000019512953>] dlfb_usb_probe.cold+0x289/0x988 drivers/video/fbdev/udlfb.c:1704 [<0000000072160152>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554 [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738 [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844 [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431 [<00000000463fbcb4>] __device_attach+0x122/0x250 drivers/base/dd.c:912 [<00000000b881a711>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491 [<00000000364bbda5>] device_add+0x5ac/0xc30 drivers/base/core.c:2936 [<00000000eecca418>] usb_set_configuration+0x9de/0xb90 drivers/usb/core/message.c:2159 [<00000000edfeca2d>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<000000001830872b>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554 [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738 [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844 [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
Reported-by: syzbot+c9e365d7f450e8aa615d@syzkaller.appspotmail.com Signed-off-by: Zqiang qiang.zhang@windriver.com Signed-off-by: Daniel Vetter daniel.vetter@ffwll.ch Link: https://patchwork.freedesktop.org/patch/msgid/20201215063022.16746-1-qiang.z... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/udlfb.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c index f9b3c1cb9530f..b9cdd02c10009 100644 --- a/drivers/video/fbdev/udlfb.c +++ b/drivers/video/fbdev/udlfb.c @@ -1017,6 +1017,7 @@ static void dlfb_ops_destroy(struct fb_info *info) } vfree(dlfb->backing_buffer); kfree(dlfb->edid); + dlfb_free_urb_list(dlfb); usb_put_dev(dlfb->udev); kfree(dlfb);
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit 3bef198f1b17d1bb89260bad947ef084c0a2d1a6 ]
syzbot is feeding invalid superblock data to JFS for mount testing. JFS does not check several of the fields -- just assumes that they are good since the JFS_MAGIC and version fields are good.
In this case (syzbot reproducer), we have s_l2bsize == 0xda0c, pad == 0xf045, and s_state == 0x50, all of which are invalid IMO. Having s_l2bsize == 0xda0c causes this UBSAN warning: UBSAN: shift-out-of-bounds in fs/jfs/jfs_mount.c:373:25 shift exponent -9716 is negative
s_l2bsize can be tested for correctness. pad can be tested for non-0 and punted. s_state can be tested for its valid values and punted.
Do those 3 tests and if any of them fails, report the superblock as invalid/corrupt and let fsck handle it.
With this patch, chkSuper() says this when JFS_DEBUG is enabled: jfs_mount: Mount Failure: superblock is corrupt! Mount JFS Failure: -22 jfs_mount failed w/return code = -22
The obvious problem with this method is that next week there could be another syzbot test that uses different fields for invalid values, this making this like a game of whack-a-mole.
syzkaller link: https://syzkaller.appspot.com/bug?extid=36315852ece4132ec193
Reported-by: syzbot+36315852ece4132ec193@syzkaller.appspotmail.com Reported-by: kernel test robot lkp@intel.com # v2 Signed-off-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Dave Kleikamp dave.kleikamp@oracle.com Cc: jfs-discussion@lists.sourceforge.net Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jfs/jfs_filsys.h | 1 + fs/jfs/jfs_mount.c | 10 ++++++++++ 2 files changed, 11 insertions(+)
diff --git a/fs/jfs/jfs_filsys.h b/fs/jfs/jfs_filsys.h index 1e899298f7f00..b5d702df7111a 100644 --- a/fs/jfs/jfs_filsys.h +++ b/fs/jfs/jfs_filsys.h @@ -268,5 +268,6 @@ * fsck() must be run to repair */ #define FM_EXTENDFS 0x00000008 /* file system extendfs() in progress */ +#define FM_STATE_MAX 0x0000000f /* max value of s_state */
#endif /* _H_JFS_FILSYS */ diff --git a/fs/jfs/jfs_mount.c b/fs/jfs/jfs_mount.c index 2935d4c776ec7..5d7d7170c03c0 100644 --- a/fs/jfs/jfs_mount.c +++ b/fs/jfs/jfs_mount.c @@ -37,6 +37,7 @@ #include <linux/fs.h> #include <linux/buffer_head.h> #include <linux/blkdev.h> +#include <linux/log2.h>
#include "jfs_incore.h" #include "jfs_filsys.h" @@ -366,6 +367,15 @@ static int chkSuper(struct super_block *sb) sbi->bsize = bsize; sbi->l2bsize = le16_to_cpu(j_sb->s_l2bsize);
+ /* check some fields for possible corruption */ + if (sbi->l2bsize != ilog2((u32)bsize) || + j_sb->pad != 0 || + le32_to_cpu(j_sb->s_state) > FM_STATE_MAX) { + rc = -EINVAL; + jfs_err("jfs_mount: Mount Failure: superblock is corrupt!"); + goto out; + } + /* * For now, ignore s_pbsize, l2bfactor. All I/O going through buffer * cache.
From: Ard Biesheuvel ardb@kernel.org
[ Upstream commit 303fd3e1c771077e32e96e5788817f025f0067e2 ]
The signed long type used for printing the number of bytes processed in tcrypt benchmarks limits the range to -/+ 2 GiB, which is not sufficient to cover the performance of common accelerated ciphers such as AES-NI when benchmarked with sec=1. So switch to u64 instead.
While at it, fix up a missing printk->pr_cont conversion in the AEAD benchmark.
Signed-off-by: Ard Biesheuvel ardb@kernel.org Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- crypto/tcrypt.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index eea0f453cfb6e..8609174e036e8 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -199,8 +199,8 @@ static int test_mb_aead_jiffies(struct test_mb_aead_data *data, int enc, goto out; }
- pr_cont("%d operations in %d seconds (%ld bytes)\n", - bcount * num_mb, secs, (long)bcount * blen * num_mb); + pr_cont("%d operations in %d seconds (%llu bytes)\n", + bcount * num_mb, secs, (u64)bcount * blen * num_mb);
out: kfree(rc); @@ -469,8 +469,8 @@ static int test_aead_jiffies(struct aead_request *req, int enc, return ret; }
- printk("%d operations in %d seconds (%ld bytes)\n", - bcount, secs, (long)bcount * blen); + pr_cont("%d operations in %d seconds (%llu bytes)\n", + bcount, secs, (u64)bcount * blen); return 0; }
@@ -760,8 +760,8 @@ static int test_mb_ahash_jiffies(struct test_mb_ahash_data *data, int blen, goto out; }
- pr_cont("%d operations in %d seconds (%ld bytes)\n", - bcount * num_mb, secs, (long)bcount * blen * num_mb); + pr_cont("%d operations in %d seconds (%llu bytes)\n", + bcount * num_mb, secs, (u64)bcount * blen * num_mb);
out: kfree(rc); @@ -1197,8 +1197,8 @@ static int test_mb_acipher_jiffies(struct test_mb_skcipher_data *data, int enc, goto out; }
- pr_cont("%d operations in %d seconds (%ld bytes)\n", - bcount * num_mb, secs, (long)bcount * blen * num_mb); + pr_cont("%d operations in %d seconds (%llu bytes)\n", + bcount * num_mb, secs, (u64)bcount * blen * num_mb);
out: kfree(rc); @@ -1435,8 +1435,8 @@ static int test_acipher_jiffies(struct skcipher_request *req, int enc, return ret; }
- pr_cont("%d operations in %d seconds (%ld bytes)\n", - bcount, secs, (long)bcount * blen); + pr_cont("%d operations in %d seconds (%llu bytes)\n", + bcount, secs, (u64)bcount * blen); return 0; }
From: Jens Axboe axboe@kernel.dk
[ Upstream commit e36cffed20a324e116f329a94061ae30dd26fb51 ]
Most callers check for non-zero return, and assume it's -ECHILD (which it always will be). One caller uses the actual error return. Clean this up and make it fully consistent, by having unlazy_walk() return a bool instead. Rename it to try_to_unlazy() and return true on success, and failure on error. That's easier to read.
No functional changes in this patch.
Cc: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/namei.c | 43 +++++++++++++++++-------------------------- 1 file changed, 17 insertions(+), 26 deletions(-)
diff --git a/fs/namei.c b/fs/namei.c index d4a6dd7723038..7af66d5a0c1bf 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -669,17 +669,17 @@ static bool legitimize_root(struct nameidata *nd) */
/** - * unlazy_walk - try to switch to ref-walk mode. + * try_to_unlazy - try to switch to ref-walk mode. * @nd: nameidata pathwalk data - * Returns: 0 on success, -ECHILD on failure + * Returns: true on success, false on failure * - * unlazy_walk attempts to legitimize the current nd->path and nd->root + * try_to_unlazy attempts to legitimize the current nd->path and nd->root * for ref-walk mode. * Must be called from rcu-walk context. - * Nothing should touch nameidata between unlazy_walk() failure and + * Nothing should touch nameidata between try_to_unlazy() failure and * terminate_walk(). */ -static int unlazy_walk(struct nameidata *nd) +static bool try_to_unlazy(struct nameidata *nd) { struct dentry *parent = nd->path.dentry;
@@ -694,14 +694,14 @@ static int unlazy_walk(struct nameidata *nd) goto out; rcu_read_unlock(); BUG_ON(nd->inode != parent->d_inode); - return 0; + return true;
out1: nd->path.mnt = NULL; nd->path.dentry = NULL; out: rcu_read_unlock(); - return -ECHILD; + return false; }
/** @@ -792,7 +792,7 @@ static int complete_walk(struct nameidata *nd) */ if (!(nd->flags & (LOOKUP_ROOT | LOOKUP_IS_SCOPED))) nd->root.mnt = NULL; - if (unlikely(unlazy_walk(nd))) + if (!try_to_unlazy(nd)) return -ECHILD; }
@@ -1466,7 +1466,7 @@ static struct dentry *lookup_fast(struct nameidata *nd, unsigned seq; dentry = __d_lookup_rcu(parent, &nd->last, &seq); if (unlikely(!dentry)) { - if (unlazy_walk(nd)) + if (!try_to_unlazy(nd)) return ERR_PTR(-ECHILD); return NULL; } @@ -1567,10 +1567,8 @@ static inline int may_lookup(struct nameidata *nd) { if (nd->flags & LOOKUP_RCU) { int err = inode_permission(nd->inode, MAY_EXEC|MAY_NOT_BLOCK); - if (err != -ECHILD) + if (err != -ECHILD || !try_to_unlazy(nd)) return err; - if (unlazy_walk(nd)) - return -ECHILD; } return inode_permission(nd->inode, MAY_EXEC); } @@ -1592,7 +1590,7 @@ static int reserve_stack(struct nameidata *nd, struct path *link, unsigned seq) // unlazy even if we fail to grab the link - cleanup needs it bool grabbed_link = legitimize_path(nd, link, seq);
- if (unlazy_walk(nd) != 0 || !grabbed_link) + if (!try_to_unlazy(nd) != 0 || !grabbed_link) return -ECHILD;
if (nd_alloc_stack(nd)) @@ -1634,7 +1632,7 @@ static const char *pick_link(struct nameidata *nd, struct path *link, touch_atime(&last->link); cond_resched(); } else if (atime_needs_update(&last->link, inode)) { - if (unlikely(unlazy_walk(nd))) + if (!try_to_unlazy(nd)) return ERR_PTR(-ECHILD); touch_atime(&last->link); } @@ -1651,11 +1649,8 @@ static const char *pick_link(struct nameidata *nd, struct path *link, get = inode->i_op->get_link; if (nd->flags & LOOKUP_RCU) { res = get(NULL, inode, &last->done); - if (res == ERR_PTR(-ECHILD)) { - if (unlikely(unlazy_walk(nd))) - return ERR_PTR(-ECHILD); + if (res == ERR_PTR(-ECHILD) && try_to_unlazy(nd)) res = get(link->dentry, inode, &last->done); - } } else { res = get(link->dentry, inode, &last->done); } @@ -2193,7 +2188,7 @@ static int link_path_walk(const char *name, struct nameidata *nd) } if (unlikely(!d_can_lookup(nd->path.dentry))) { if (nd->flags & LOOKUP_RCU) { - if (unlazy_walk(nd)) + if (!try_to_unlazy(nd)) return -ECHILD; } return -ENOTDIR; @@ -3127,7 +3122,6 @@ static const char *open_last_lookups(struct nameidata *nd, struct inode *inode; struct dentry *dentry; const char *res; - int error;
nd->flags |= op->intent;
@@ -3151,9 +3145,8 @@ static const char *open_last_lookups(struct nameidata *nd, } else { /* create side of things */ if (nd->flags & LOOKUP_RCU) { - error = unlazy_walk(nd); - if (unlikely(error)) - return ERR_PTR(error); + if (!try_to_unlazy(nd)) + return ERR_PTR(-ECHILD); } audit_inode(nd->name, dir, AUDIT_INODE_PARENT); /* trailing slashes? */ @@ -3162,9 +3155,7 @@ static const char *open_last_lookups(struct nameidata *nd, }
if (open_flag & (O_CREAT | O_TRUNC | O_WRONLY | O_RDWR)) { - error = mnt_want_write(nd->path.mnt); - if (!error) - got_write = true; + got_write = !mnt_want_write(nd->path.mnt); /* * do _not_ fail yet - we might not need that or fail with * a different error; let lookup_open() decide; we'll be
On Wed 2021-02-24 07:51:39, Sasha Levin wrote:
From: Jens Axboe axboe@kernel.dk
[ Upstream commit e36cffed20a324e116f329a94061ae30dd26fb51 ]
Most callers check for non-zero return, and assume it's -ECHILD (which it always will be). One caller uses the actual error return. Clean this up and make it fully consistent, by having unlazy_walk() return a bool instead. Rename it to try_to_unlazy() and return true on success, and failure on error. That's easier to read.
No functional changes in this patch.
Easier to read, but not fixing bug. I don't believe this is suitable for stable.
Best regards, Pavel
From: Peter Zijlstra peterz@infradead.org
[ Upstream commit 1b7af295541d75535374325fd617944534853919 ]
The try_invoke_on_locked_down_task() function currently requires that interrupts be enabled, but it is called with interrupts disabled from rcu_print_task_stall(), resulting in an "IRQs not enabled as expected" diagnostic. This commit therefore updates try_invoke_on_locked_down_task() to use raw_spin_lock_irqsave() instead of raw_spin_lock_irq(), thus allowing use from either context.
Link: https://lore.kernel.org/lkml/000000000000903d5805ab908fc4@google.com/ Link: https://lore.kernel.org/lkml/20200928075729.GC2611@hirez.programming.kicks-a... Reported-by: syzbot+cb3b69ae80afd6535b0e@syzkaller.appspotmail.com Signed-off-by: Peter Zijlstra peterz@infradead.org Signed-off-by: Paul E. McKenney paulmck@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/sched/core.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 77aa0e788b9b7..269165bf440af 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -2989,7 +2989,7 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags)
/** * try_invoke_on_locked_down_task - Invoke a function on task in fixed state - * @p: Process for which the function is to be invoked. + * @p: Process for which the function is to be invoked, can be @current. * @func: Function to invoke. * @arg: Argument to function. * @@ -3007,12 +3007,11 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) */ bool try_invoke_on_locked_down_task(struct task_struct *p, bool (*func)(struct task_struct *t, void *arg), void *arg) { - bool ret = false; struct rq_flags rf; + bool ret = false; struct rq *rq;
- lockdep_assert_irqs_enabled(); - raw_spin_lock_irq(&p->pi_lock); + raw_spin_lock_irqsave(&p->pi_lock, rf.flags); if (p->on_rq) { rq = __task_rq_lock(p, &rf); if (task_rq(p) == rq) @@ -3029,7 +3028,7 @@ bool try_invoke_on_locked_down_task(struct task_struct *p, bool (*func)(struct t ret = func(p, arg); } } - raw_spin_unlock_irq(&p->pi_lock); + raw_spin_unlock_irqrestore(&p->pi_lock, rf.flags); return ret; }
From: Defang Bo bodefang@126.com
[ Upstream commit e4180c4253f3f2da09047f5139959227f5cf1173 ]
Similar to commit <b82175750131>("drm/amdgpu: fix IH overflow on Vega10 v2"). When an ring buffer overflow happens the appropriate bit is set in the WPTR register which is also written back to memory. But clearing the bit in the WPTR doesn't trigger another memory writeback.
So what can happen is that we end up processing the buffer overflow over and over again because the bit is never cleared. Resulting in a random system lockup because of an infinite loop in an interrupt handler.
Reviewed-by: Christian König christian.koenig@amd.com Signed-off-by: Defang Bo bodefang@126.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/cz_ih.c | 37 ++++++++++++++++--------- drivers/gpu/drm/amd/amdgpu/iceland_ih.c | 36 +++++++++++++++--------- drivers/gpu/drm/amd/amdgpu/tonga_ih.c | 37 ++++++++++++++++--------- 3 files changed, 71 insertions(+), 39 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/cz_ih.c b/drivers/gpu/drm/amd/amdgpu/cz_ih.c index 1dca0cabc326a..13520d173296f 100644 --- a/drivers/gpu/drm/amd/amdgpu/cz_ih.c +++ b/drivers/gpu/drm/amd/amdgpu/cz_ih.c @@ -193,19 +193,30 @@ static u32 cz_ih_get_wptr(struct amdgpu_device *adev,
wptr = le32_to_cpu(*ih->wptr_cpu);
- if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) { - wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0); - /* When a ring buffer overflow happen start parsing interrupt - * from the last not overwritten vector (wptr + 16). Hopefully - * this should allow us to catchup. - */ - dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n", - wptr, ih->rptr, (wptr + 16) & ih->ptr_mask); - ih->rptr = (wptr + 16) & ih->ptr_mask; - tmp = RREG32(mmIH_RB_CNTL); - tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1); - WREG32(mmIH_RB_CNTL, tmp); - } + if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) + goto out; + + /* Double check that the overflow wasn't already cleared. */ + wptr = RREG32(mmIH_RB_WPTR); + + if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) + goto out; + + wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0); + + /* When a ring buffer overflow happen start parsing interrupt + * from the last not overwritten vector (wptr + 16). Hopefully + * this should allow us to catchup. + */ + dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n", + wptr, ih->rptr, (wptr + 16) & ih->ptr_mask); + ih->rptr = (wptr + 16) & ih->ptr_mask; + tmp = RREG32(mmIH_RB_CNTL); + tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1); + WREG32(mmIH_RB_CNTL, tmp); + + +out: return (wptr & ih->ptr_mask); }
diff --git a/drivers/gpu/drm/amd/amdgpu/iceland_ih.c b/drivers/gpu/drm/amd/amdgpu/iceland_ih.c index a13dd9a51149a..7d165f024f072 100644 --- a/drivers/gpu/drm/amd/amdgpu/iceland_ih.c +++ b/drivers/gpu/drm/amd/amdgpu/iceland_ih.c @@ -193,19 +193,29 @@ static u32 iceland_ih_get_wptr(struct amdgpu_device *adev,
wptr = le32_to_cpu(*ih->wptr_cpu);
- if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) { - wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0); - /* When a ring buffer overflow happen start parsing interrupt - * from the last not overwritten vector (wptr + 16). Hopefully - * this should allow us to catchup. - */ - dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n", - wptr, ih->rptr, (wptr + 16) & ih->ptr_mask); - ih->rptr = (wptr + 16) & ih->ptr_mask; - tmp = RREG32(mmIH_RB_CNTL); - tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1); - WREG32(mmIH_RB_CNTL, tmp); - } + if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) + goto out; + + /* Double check that the overflow wasn't already cleared. */ + wptr = RREG32(mmIH_RB_WPTR); + + if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) + goto out; + + wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0); + /* When a ring buffer overflow happen start parsing interrupt + * from the last not overwritten vector (wptr + 16). Hopefully + * this should allow us to catchup. + */ + dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n", + wptr, ih->rptr, (wptr + 16) & ih->ptr_mask); + ih->rptr = (wptr + 16) & ih->ptr_mask; + tmp = RREG32(mmIH_RB_CNTL); + tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1); + WREG32(mmIH_RB_CNTL, tmp); + + +out: return (wptr & ih->ptr_mask); }
diff --git a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c index e40140bf6699c..db0a3bda13fbe 100644 --- a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c +++ b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c @@ -195,19 +195,30 @@ static u32 tonga_ih_get_wptr(struct amdgpu_device *adev,
wptr = le32_to_cpu(*ih->wptr_cpu);
- if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) { - wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0); - /* When a ring buffer overflow happen start parsing interrupt - * from the last not overwritten vector (wptr + 16). Hopefully - * this should allow us to catchup. - */ - dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n", - wptr, ih->rptr, (wptr + 16) & ih->ptr_mask); - ih->rptr = (wptr + 16) & ih->ptr_mask; - tmp = RREG32(mmIH_RB_CNTL); - tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1); - WREG32(mmIH_RB_CNTL, tmp); - } + if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) + goto out; + + /* Double check that the overflow wasn't already cleared. */ + wptr = RREG32(mmIH_RB_WPTR); + + if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) + goto out; + + wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0); + + /* When a ring buffer overflow happen start parsing interrupt + * from the last not overwritten vector (wptr + 16). Hopefully + * this should allow us to catchup. + */ + + dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n", + wptr, ih->rptr, (wptr + 16) & ih->ptr_mask); + ih->rptr = (wptr + 16) & ih->ptr_mask; + tmp = RREG32(mmIH_RB_CNTL); + tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1); + WREG32(mmIH_RB_CNTL, tmp); + +out: return (wptr & ih->ptr_mask); }
From: Nirmoy Das nirmoy.das@amd.com
[ Upstream commit 907830b0fc9e374d00f3c83de5e426157b482c01 ]
RX 5600 XT Pulse advertises support for BAR 0 being 256MB, 512MB, or 1GB, but it also supports 2GB, 4GB, and 8GB. Add a rebar size quirk so that the BAR 0 is big enough to cover complete VARM.
Signed-off-by: Christian König christian.koenig@amd.com Signed-off-by: Nirmoy Das nirmoy.das@amd.com Acked-by: Bjorn Helgaas bhelgaas@google.com Link: https://patchwork.kernel.org/project/dri-devel/patch/20210107175017.15893-5-... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pci.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6427cbd0a5be2..5c93450725108 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3577,7 +3577,14 @@ u32 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar) return 0;
pci_read_config_dword(pdev, pos + PCI_REBAR_CAP, &cap); - return (cap & PCI_REBAR_CAP_SIZES) >> 4; + cap &= PCI_REBAR_CAP_SIZES; + + /* Sapphire RX 5600 XT Pulse has an invalid cap dword for BAR 0 */ + if (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x731f && + bar == 0 && cap == 0x7000) + cap = 0x3f000; + + return cap >> 4; }
/**
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 1851ccf9e155b2a6f6cca1a7bd49325f5efbd5d2 ]
Some devices, like mini PCs/media/top-set boxes do not have any speakers at all, an example of the is the Mele PCG03 Mini PC.
Add a new BYT_RT5640_NO_SPEAKERS quirk-flag which when sets does not add speaker routes and modifies the components and the (optional) long_name strings to reflect that there are no speakers.
Cc: Rasmus Porsager rasmus@beat.dk Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20210109210119.159032-2-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index f790514a147dd..db3633de9122f 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -71,6 +71,7 @@ enum { #define BYT_RT5640_SSP0_AIF2 BIT(21) #define BYT_RT5640_MCLK_EN BIT(22) #define BYT_RT5640_MCLK_25MHZ BIT(23) +#define BYT_RT5640_NO_SPEAKERS BIT(24)
#define BYTCR_INPUT_DEFAULTS \ (BYT_RT5640_IN3_MAP | \ @@ -132,6 +133,8 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk JD_NOT_INV enabled\n"); if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) dev_info(dev, "quirk MONO_SPEAKER enabled\n"); + if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) + dev_info(dev, "quirk NO_SPEAKERS enabled\n"); if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC) dev_info(dev, "quirk DIFF_MIC enabled\n"); if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) { @@ -934,7 +937,7 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime) ret = snd_soc_dapm_add_routes(&card->dapm, byt_rt5640_mono_spk_map, ARRAY_SIZE(byt_rt5640_mono_spk_map)); - } else { + } else if (!(byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)) { ret = snd_soc_dapm_add_routes(&card->dapm, byt_rt5640_stereo_spk_map, ARRAY_SIZE(byt_rt5640_stereo_spk_map)); @@ -1179,6 +1182,7 @@ struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) { static const char * const map_name[] = { "dmic1", "dmic2", "in1", "in3" }; + __maybe_unused const char *spk_type; const struct dmi_system_id *dmi_id; struct byt_rt5640_private *priv; struct snd_soc_acpi_mach *mach; @@ -1186,7 +1190,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) struct acpi_device *adev; int ret_val = 0; int dai_index = 0; - int i; + int i, cfg_spk;
is_bytcr = false; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); @@ -1325,16 +1329,24 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) } }
+ if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) { + cfg_spk = 0; + spk_type = "none"; + } else if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) { + cfg_spk = 1; + spk_type = "mono"; + } else { + cfg_spk = 2; + spk_type = "stereo"; + } + snprintf(byt_rt5640_components, sizeof(byt_rt5640_components), - "cfg-spk:%s cfg-mic:%s", - (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ? "1" : "2", + "cfg-spk:%d cfg-mic:%s", cfg_spk, map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]); byt_rt5640_card.components = byt_rt5640_components; #if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES) snprintf(byt_rt5640_long_name, sizeof(byt_rt5640_long_name), - "bytcr-rt5640-%s-spk-%s-mic", - (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ? - "mono" : "stereo", + "bytcr-rt5640-%s-spk-%s-mic", spk_type, map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]); byt_rt5640_card.long_name = byt_rt5640_long_name; #endif
From: Nicholas Kazlauskas nicholas.kazlauskas@amd.com
[ Upstream commit 44a09e3d95bd2b7b0c224100f78f335859c4e193 ]
[Why] If the BIOS table is invalid or corrupt then get_i2c_info can fail and we dereference a NULL pointer.
[How] Check that ddc_pin is not NULL before using it and log an error if it is because this is unexpected.
Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Nicholas Kazlauskas nicholas.kazlauskas@amd.com Reviewed-by: Eric Yang eric.yang2@amd.com Acked-by: Anson Jacob anson.jacob@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c index e1e5d81a5e438..21c7b642a8b4e 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c @@ -1454,6 +1454,11 @@ static bool dc_link_construct(struct dc_link *link, goto ddc_create_fail; }
+ if (!link->ddc->ddc_pin) { + DC_ERROR("Failed to get I2C info for connector!\n"); + goto ddc_create_fail; + } + link->ddc_hw_inst = dal_ddc_get_line(dal_ddc_service_get_ddc_pin(link->ddc));
From: Jingwen Chen Jingwen.Chen2@amd.com
[ Upstream commit 64dcf2f01d59cf9fad19b1a387bd39736a8f4d69 ]
[Why] when vram lost happened in guest, try to write vram can lead to kernel stuck.
[How] When the readback data is invalid, don't do write work, directly reschedule a new work.
Signed-off-by: Jingwen Chen Jingwen.Chen2@amd.com Reviewed-by: Monk Liumonk.liu@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c index d0aea5e395315..e7678ba8fdcf8 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c @@ -558,10 +558,14 @@ static int amdgpu_virt_write_vf2pf_data(struct amdgpu_device *adev) void amdgpu_virt_update_vf2pf_work_item(struct work_struct *work) { struct amdgpu_device *adev = container_of(work, struct amdgpu_device, virt.vf2pf_work.work); + int ret;
- amdgpu_virt_read_pf2vf_data(adev); + ret = amdgpu_virt_read_pf2vf_data(adev); + if (ret) + goto out; amdgpu_virt_write_vf2pf_data(adev);
+out: schedule_delayed_work(&(adev->virt.vf2pf_work), adev->virt.vf2pf_update_interval_ms); }
From: Sean Young sean@mess.org
[ Upstream commit 9dec0f48a75e0dadca498002d25ef4e143e60194 ]
prescaler larger than 8 would mean the carrier is at most 152Hz, which does not make sense for IR carriers.
Reported-by: syzbot+6d31bf169a8265204b8d@syzkaller.appspotmail.com Signed-off-by: Sean Young sean@mess.org Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/rc/mceusb.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index f1dbd059ed087..43d356251d051 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -701,11 +701,18 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len, data[0], data[1]); break; case MCE_RSP_EQIRCFS: + if (!data[0] && !data[1]) { + dev_dbg(dev, "%s: no carrier", inout); + break; + } + // prescaler should make sense + if (data[0] > 8) + break; period = DIV_ROUND_CLOSEST((1U << data[0] * 2) * (data[1] + 1), 10); if (!period) break; - carrier = (1000 * 1000) / period; + carrier = USEC_PER_SEC / period; dev_dbg(dev, "%s carrier of %u Hz (period %uus)", inout, carrier, period); break;
From: Hans Verkuil hverkuil-cisco@xs4all.nl
[ Upstream commit 048c96e28674f15c0403deba2104ffba64544a06 ]
If a menu has more than 64 items, then don't check menu_skip_mask for items 65 and up.
Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Reported-by: syzbot+42d8c7c3d3e594b34346@syzkaller.appspotmail.com Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/v4l2-core/v4l2-ctrls.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c index bd7f330c941c4..cfe422d9f439b 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -1987,7 +1987,8 @@ static int std_validate(const struct v4l2_ctrl *ctrl, u32 idx, case V4L2_CTRL_TYPE_INTEGER_MENU: if (ptr.p_s32[idx] < ctrl->minimum || ptr.p_s32[idx] > ctrl->maximum) return -ERANGE; - if (ctrl->menu_skip_mask & (1ULL << ptr.p_s32[idx])) + if (ptr.p_s32[idx] < BITS_PER_LONG_LONG && + (ctrl->menu_skip_mask & BIT_ULL(ptr.p_s32[idx]))) return -EINVAL; if (ctrl->type == V4L2_CTRL_TYPE_MENU && ctrl->qmenu[ptr.p_s32[idx]][0] == '\0')
From: Ricardo Ribalda ribalda@chromium.org
[ Upstream commit 7532dad6634031d083df7af606fac655b8d08b5c ]
Avoid an underflow while calculating the number of inputs for entities with zero pads.
Signed-off-by: Ricardo Ribalda ribalda@chromium.org Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/uvc/uvc_driver.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index ddb9eaa11be71..5ad5282641350 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -1028,7 +1028,10 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u8 id, unsigned int i;
extra_size = roundup(extra_size, sizeof(*entity->pads)); - num_inputs = (type & UVC_TERM_OUTPUT) ? num_pads : num_pads - 1; + if (num_pads) + num_inputs = type & UVC_TERM_OUTPUT ? num_pads : num_pads - 1; + else + num_inputs = 0; size = sizeof(*entity) + extra_size + sizeof(*entity->pads) * num_pads + num_inputs; entity = kzalloc(size, GFP_KERNEL); @@ -1044,7 +1047,7 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u8 id,
for (i = 0; i < num_inputs; ++i) entity->pads[i].flags = MEDIA_PAD_FL_SINK; - if (!UVC_ENTITY_IS_OTERM(entity)) + if (!UVC_ENTITY_IS_OTERM(entity) && num_pads) entity->pads[num_pads-1].flags = MEDIA_PAD_FL_SOURCE;
entity->bNrInPins = num_inputs;
From: Jaegeuk Kim jaegeuk@kernel.org
[ Upstream commit 632faca72938f9f63049e48a8c438913828ac7a9 ]
If we have large section/zone, unallocated segment makes them corrupted.
E.g.,
- Pinned file: -1 119304647 119304647 - ATGC data: -1 119304647 119304647
Reviewed-by: Chao Yu yuchao0@huawei.com Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/f2fs/segment.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h index e81eb0748e2a9..229814b4f4a6c 100644 --- a/fs/f2fs/segment.h +++ b/fs/f2fs/segment.h @@ -101,11 +101,11 @@ static inline void sanity_check_seg_type(struct f2fs_sb_info *sbi, #define BLKS_PER_SEC(sbi) \ ((sbi)->segs_per_sec * (sbi)->blocks_per_seg) #define GET_SEC_FROM_SEG(sbi, segno) \ - ((segno) / (sbi)->segs_per_sec) + (((segno) == -1) ? -1: (segno) / (sbi)->segs_per_sec) #define GET_SEG_FROM_SEC(sbi, secno) \ ((secno) * (sbi)->segs_per_sec) #define GET_ZONE_FROM_SEC(sbi, secno) \ - ((secno) / (sbi)->secs_per_zone) + (((secno) == -1) ? -1: (secno) / (sbi)->secs_per_zone) #define GET_ZONE_FROM_SEG(sbi, segno) \ GET_ZONE_FROM_SEC(sbi, GET_SEC_FROM_SEG(sbi, segno))
From: Chao Yu yuchao0@huawei.com
[ Upstream commit 46085f37fc9e12d5c3539fb768b5ad7951e72acf ]
fsstress + fault injection test case reports a warning message as below:
WARNING: CPU: 13 PID: 6226 at fs/inode.c:361 inc_nlink+0x32/0x40 Call Trace: f2fs_init_inode_metadata+0x25c/0x4a0 [f2fs] f2fs_add_inline_entry+0x153/0x3b0 [f2fs] f2fs_add_dentry+0x75/0x80 [f2fs] f2fs_do_add_link+0x108/0x160 [f2fs] f2fs_rename2+0x6ab/0x14f0 [f2fs] vfs_rename+0x70c/0x940 do_renameat2+0x4d8/0x4f0 __x64_sys_renameat2+0x4b/0x60 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Following race case can cause this: Thread A Kworker - f2fs_rename - f2fs_create_whiteout - __f2fs_tmpfile - f2fs_i_links_write - f2fs_mark_inode_dirty_sync - mark_inode_dirty_sync - writeback_single_inode - __writeback_single_inode - spin_lock(&inode->i_lock) - inode->i_state |= I_LINKABLE - inode->i_state &= ~dirty - spin_unlock(&inode->i_lock) - f2fs_add_link - f2fs_do_add_link - f2fs_add_dentry - f2fs_add_inline_entry - f2fs_init_inode_metadata - f2fs_i_links_write - inc_nlink - WARN_ON(!(inode->i_state & I_LINKABLE))
Fix to add i_lock to avoid i_state update race condition.
Signed-off-by: Chao Yu yuchao0@huawei.com Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/f2fs/namei.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c index 8fa37d1434de1..5f7ab4f113224 100644 --- a/fs/f2fs/namei.c +++ b/fs/f2fs/namei.c @@ -854,7 +854,11 @@ static int __f2fs_tmpfile(struct inode *dir, struct dentry *dentry,
if (whiteout) { f2fs_i_links_write(inode, false); + + spin_lock(&inode->i_lock); inode->i_state |= I_LINKABLE; + spin_unlock(&inode->i_lock); + *whiteout = inode; } else { d_tmpfile(dentry, inode); @@ -1040,7 +1044,11 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry, err = f2fs_add_link(old_dentry, whiteout); if (err) goto put_out_dir; + + spin_lock(&whiteout->i_lock); whiteout->i_state &= ~I_LINKABLE; + spin_unlock(&whiteout->i_lock); + iput(whiteout); }
From: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp
[ Upstream commit 5797e861e402fff2bedce4ec8b7c89f4248b6073 ]
syzbot is reporting that tomoyo's quota check is racy [1]. But this check is tolerant of some degree of inaccuracy. Thus, teach KCSAN to ignore this data race.
[1] https://syzkaller.appspot.com/bug?id=999533deec7ba6337f8aa25d8bd1a4d5f7e5047...
Reported-by: syzbot syzbot+0789a72b46fd91431bd8@syzkaller.appspotmail.com Signed-off-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Sasha Levin sashal@kernel.org --- security/tomoyo/file.c | 16 ++++++++-------- security/tomoyo/network.c | 8 ++++---- security/tomoyo/util.c | 24 ++++++++++++------------ 3 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/security/tomoyo/file.c b/security/tomoyo/file.c index 051f7297877cb..1e6077568fdec 100644 --- a/security/tomoyo/file.c +++ b/security/tomoyo/file.c @@ -362,14 +362,14 @@ static bool tomoyo_merge_path_acl(struct tomoyo_acl_info *a, { u16 * const a_perm = &container_of(a, struct tomoyo_path_acl, head) ->perm; - u16 perm = *a_perm; + u16 perm = READ_ONCE(*a_perm); const u16 b_perm = container_of(b, struct tomoyo_path_acl, head)->perm;
if (is_delete) perm &= ~b_perm; else perm |= b_perm; - *a_perm = perm; + WRITE_ONCE(*a_perm, perm); return !perm; }
@@ -437,7 +437,7 @@ static bool tomoyo_merge_mkdev_acl(struct tomoyo_acl_info *a, { u8 *const a_perm = &container_of(a, struct tomoyo_mkdev_acl, head)->perm; - u8 perm = *a_perm; + u8 perm = READ_ONCE(*a_perm); const u8 b_perm = container_of(b, struct tomoyo_mkdev_acl, head) ->perm;
@@ -445,7 +445,7 @@ static bool tomoyo_merge_mkdev_acl(struct tomoyo_acl_info *a, perm &= ~b_perm; else perm |= b_perm; - *a_perm = perm; + WRITE_ONCE(*a_perm, perm); return !perm; }
@@ -517,14 +517,14 @@ static bool tomoyo_merge_path2_acl(struct tomoyo_acl_info *a, { u8 * const a_perm = &container_of(a, struct tomoyo_path2_acl, head) ->perm; - u8 perm = *a_perm; + u8 perm = READ_ONCE(*a_perm); const u8 b_perm = container_of(b, struct tomoyo_path2_acl, head)->perm;
if (is_delete) perm &= ~b_perm; else perm |= b_perm; - *a_perm = perm; + WRITE_ONCE(*a_perm, perm); return !perm; }
@@ -655,7 +655,7 @@ static bool tomoyo_merge_path_number_acl(struct tomoyo_acl_info *a, { u8 * const a_perm = &container_of(a, struct tomoyo_path_number_acl, head)->perm; - u8 perm = *a_perm; + u8 perm = READ_ONCE(*a_perm); const u8 b_perm = container_of(b, struct tomoyo_path_number_acl, head) ->perm;
@@ -663,7 +663,7 @@ static bool tomoyo_merge_path_number_acl(struct tomoyo_acl_info *a, perm &= ~b_perm; else perm |= b_perm; - *a_perm = perm; + WRITE_ONCE(*a_perm, perm); return !perm; }
diff --git a/security/tomoyo/network.c b/security/tomoyo/network.c index f9ff121d7e1eb..a89ed55d85d41 100644 --- a/security/tomoyo/network.c +++ b/security/tomoyo/network.c @@ -233,14 +233,14 @@ static bool tomoyo_merge_inet_acl(struct tomoyo_acl_info *a, { u8 * const a_perm = &container_of(a, struct tomoyo_inet_acl, head)->perm; - u8 perm = *a_perm; + u8 perm = READ_ONCE(*a_perm); const u8 b_perm = container_of(b, struct tomoyo_inet_acl, head)->perm;
if (is_delete) perm &= ~b_perm; else perm |= b_perm; - *a_perm = perm; + WRITE_ONCE(*a_perm, perm); return !perm; }
@@ -259,14 +259,14 @@ static bool tomoyo_merge_unix_acl(struct tomoyo_acl_info *a, { u8 * const a_perm = &container_of(a, struct tomoyo_unix_acl, head)->perm; - u8 perm = *a_perm; + u8 perm = READ_ONCE(*a_perm); const u8 b_perm = container_of(b, struct tomoyo_unix_acl, head)->perm;
if (is_delete) perm &= ~b_perm; else perm |= b_perm; - *a_perm = perm; + WRITE_ONCE(*a_perm, perm); return !perm; }
diff --git a/security/tomoyo/util.c b/security/tomoyo/util.c index a40abb0b91eee..cd458e10cf2af 100644 --- a/security/tomoyo/util.c +++ b/security/tomoyo/util.c @@ -1053,30 +1053,30 @@ bool tomoyo_domain_quota_is_ok(struct tomoyo_request_info *r)
if (ptr->is_deleted) continue; + /* + * Reading perm bitmap might race with tomoyo_merge_*() because + * caller does not hold tomoyo_policy_lock mutex. But exceeding + * max_learning_entry parameter by a few entries does not harm. + */ switch (ptr->type) { case TOMOYO_TYPE_PATH_ACL: - perm = container_of(ptr, struct tomoyo_path_acl, head) - ->perm; + data_race(perm = container_of(ptr, struct tomoyo_path_acl, head)->perm); break; case TOMOYO_TYPE_PATH2_ACL: - perm = container_of(ptr, struct tomoyo_path2_acl, head) - ->perm; + data_race(perm = container_of(ptr, struct tomoyo_path2_acl, head)->perm); break; case TOMOYO_TYPE_PATH_NUMBER_ACL: - perm = container_of(ptr, struct tomoyo_path_number_acl, - head)->perm; + data_race(perm = container_of(ptr, struct tomoyo_path_number_acl, head) + ->perm); break; case TOMOYO_TYPE_MKDEV_ACL: - perm = container_of(ptr, struct tomoyo_mkdev_acl, - head)->perm; + data_race(perm = container_of(ptr, struct tomoyo_mkdev_acl, head)->perm); break; case TOMOYO_TYPE_INET_ACL: - perm = container_of(ptr, struct tomoyo_inet_acl, - head)->perm; + data_race(perm = container_of(ptr, struct tomoyo_inet_acl, head)->perm); break; case TOMOYO_TYPE_UNIX_ACL: - perm = container_of(ptr, struct tomoyo_unix_acl, - head)->perm; + data_race(perm = container_of(ptr, struct tomoyo_unix_acl, head)->perm); break; case TOMOYO_TYPE_MANUAL_TASK_ACL: perm = 0;
From: Chao Leng lengchao@huawei.com
[ Upstream commit 2547906982e2e6a0d42f8957f55af5bb51a7e55f ]
Add nvme_cancel_tagset and nvme_cancel_admin_tagset for tear down and reconnection error handling.
Signed-off-by: Chao Leng lengchao@huawei.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/core.c | 20 ++++++++++++++++++++ drivers/nvme/host/nvme.h | 2 ++ 2 files changed, 22 insertions(+)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 4ec5f05dabe1d..e1e574ecf031b 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -351,6 +351,26 @@ bool nvme_cancel_request(struct request *req, void *data, bool reserved) } EXPORT_SYMBOL_GPL(nvme_cancel_request);
+void nvme_cancel_tagset(struct nvme_ctrl *ctrl) +{ + if (ctrl->tagset) { + blk_mq_tagset_busy_iter(ctrl->tagset, + nvme_cancel_request, ctrl); + blk_mq_tagset_wait_completed_request(ctrl->tagset); + } +} +EXPORT_SYMBOL_GPL(nvme_cancel_tagset); + +void nvme_cancel_admin_tagset(struct nvme_ctrl *ctrl) +{ + if (ctrl->admin_tagset) { + blk_mq_tagset_busy_iter(ctrl->admin_tagset, + nvme_cancel_request, ctrl); + blk_mq_tagset_wait_completed_request(ctrl->admin_tagset); + } +} +EXPORT_SYMBOL_GPL(nvme_cancel_admin_tagset); + bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, enum nvme_ctrl_state new_state) { diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 567f7ad18a91c..f843540cc238e 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -571,6 +571,8 @@ static inline bool nvme_is_aen_req(u16 qid, __u16 command_id)
void nvme_complete_rq(struct request *req); bool nvme_cancel_request(struct request *req, void *data, bool reserved); +void nvme_cancel_tagset(struct nvme_ctrl *ctrl); +void nvme_cancel_admin_tagset(struct nvme_ctrl *ctrl); bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, enum nvme_ctrl_state new_state); bool nvme_wait_reset(struct nvme_ctrl *ctrl);
From: Chao Leng lengchao@huawei.com
[ Upstream commit 958dc1d32c80566f58d18f05ef1f05bd32d172c1 ]
A crash happens when inject failed reconnection. If reconnect failed after start io queues, the queues will be unquiesced and new requests continue to be delivered. Reconnection error handling process directly free queues without cancel suspend requests. The suppend request will time out, and then crash due to use the queue after free.
Add sync queues and cancel suppend requests for reconnection error handling.
Signed-off-by: Chao Leng lengchao@huawei.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/rdma.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 493ed7ba86ed2..fd2b4dbe9d160 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -919,12 +919,16 @@ static int nvme_rdma_configure_admin_queue(struct nvme_rdma_ctrl *ctrl,
error = nvme_init_identify(&ctrl->ctrl); if (error) - goto out_stop_queue; + goto out_quiesce_queue;
return 0;
+out_quiesce_queue: + blk_mq_quiesce_queue(ctrl->ctrl.admin_q); + blk_sync_queue(ctrl->ctrl.admin_q); out_stop_queue: nvme_rdma_stop_queue(&ctrl->queues[0]); + nvme_cancel_admin_tagset(&ctrl->ctrl); out_cleanup_queue: if (new) blk_cleanup_queue(ctrl->ctrl.admin_q); @@ -1001,8 +1005,10 @@ static int nvme_rdma_configure_io_queues(struct nvme_rdma_ctrl *ctrl, bool new)
out_wait_freeze_timed_out: nvme_stop_queues(&ctrl->ctrl); + nvme_sync_io_queues(&ctrl->ctrl); nvme_rdma_stop_io_queues(ctrl); out_cleanup_connect_q: + nvme_cancel_tagset(&ctrl->ctrl); if (new) blk_cleanup_queue(ctrl->ctrl.connect_q); out_free_tag_set: @@ -1144,10 +1150,18 @@ static int nvme_rdma_setup_ctrl(struct nvme_rdma_ctrl *ctrl, bool new) return 0;
destroy_io: - if (ctrl->ctrl.queue_count > 1) + if (ctrl->ctrl.queue_count > 1) { + nvme_stop_queues(&ctrl->ctrl); + nvme_sync_io_queues(&ctrl->ctrl); + nvme_rdma_stop_io_queues(ctrl); + nvme_cancel_tagset(&ctrl->ctrl); nvme_rdma_destroy_io_queues(ctrl, new); + } destroy_admin: + blk_mq_quiesce_queue(ctrl->ctrl.admin_q); + blk_sync_queue(ctrl->ctrl.admin_q); nvme_rdma_stop_queue(&ctrl->queues[0]); + nvme_cancel_admin_tagset(&ctrl->ctrl); nvme_rdma_destroy_admin_queue(ctrl, new); return ret; }
From: Chao Leng lengchao@huawei.com
[ Upstream commit 70a99574a79f1cd4dc7ad56ea37be40844bfb97b ]
If reconnect failed after start io queues, the queues will be unquiesced and new requests continue to be delivered. Reconnection error handling process directly free queues without cancel suspend requests. The suppend request will time out, and then crash due to use the queue after free.
Add sync queues and cancel suppend requests for reconnection error handling.
Signed-off-by: Chao Leng lengchao@huawei.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/tcp.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index 6487b7897d1fb..739ac7deccd96 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -1815,8 +1815,10 @@ static int nvme_tcp_configure_io_queues(struct nvme_ctrl *ctrl, bool new)
out_wait_freeze_timed_out: nvme_stop_queues(ctrl); + nvme_sync_io_queues(ctrl); nvme_tcp_stop_io_queues(ctrl); out_cleanup_connect_q: + nvme_cancel_tagset(ctrl); if (new) blk_cleanup_queue(ctrl->connect_q); out_free_tag_set: @@ -1878,12 +1880,16 @@ static int nvme_tcp_configure_admin_queue(struct nvme_ctrl *ctrl, bool new)
error = nvme_init_identify(ctrl); if (error) - goto out_stop_queue; + goto out_quiesce_queue;
return 0;
+out_quiesce_queue: + blk_mq_quiesce_queue(ctrl->admin_q); + blk_sync_queue(ctrl->admin_q); out_stop_queue: nvme_tcp_stop_queue(ctrl, 0); + nvme_cancel_admin_tagset(ctrl); out_cleanup_queue: if (new) blk_cleanup_queue(ctrl->admin_q); @@ -2003,10 +2009,18 @@ static int nvme_tcp_setup_ctrl(struct nvme_ctrl *ctrl, bool new) return 0;
destroy_io: - if (ctrl->queue_count > 1) + if (ctrl->queue_count > 1) { + nvme_stop_queues(ctrl); + nvme_sync_io_queues(ctrl); + nvme_tcp_stop_io_queues(ctrl); + nvme_cancel_tagset(ctrl); nvme_tcp_destroy_io_queues(ctrl, new); + } destroy_admin: + blk_mq_quiesce_queue(ctrl->admin_q); + blk_sync_queue(ctrl->admin_q); nvme_tcp_stop_queue(ctrl, 0); + nvme_cancel_admin_tagset(ctrl); nvme_tcp_destroy_admin_queue(ctrl, new); return ret; }
From: Sabyrzhan Tasbolatov snovitoll@gmail.com
[ Upstream commit 7ef4c19d245f3dc233fd4be5acea436edd1d83d8 ]
syzbot found WARNINGs in several smackfs write operations where bytes count is passed to memdup_user_nul which exceeds GFP MAX_ORDER. Check count size if bigger than PAGE_SIZE.
Per smackfs doc, smk_write_net4addr accepts any label or -CIPSO, smk_write_net6addr accepts any label or -DELETE. I couldn't find any general rule for other label lengths except SMK_LABELLEN, SMK_LONGLABEL, SMK_CIPSOMAX which are documented.
Let's constrain, in general, smackfs label lengths for PAGE_SIZE. Although fuzzer crashes write to smackfs/netlabel on 0x400000 length.
Here is a quick way to reproduce the WARNING: python -c "print('A' * 0x400000)" > /sys/fs/smackfs/netlabel
Reported-by: syzbot+a71a442385a0b2815497@syzkaller.appspotmail.com Signed-off-by: Sabyrzhan Tasbolatov snovitoll@gmail.com Signed-off-by: Casey Schaufler casey@schaufler-ca.com Signed-off-by: Sasha Levin sashal@kernel.org --- security/smack/smackfs.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c index e567b4baf3a08..334299357e715 100644 --- a/security/smack/smackfs.c +++ b/security/smack/smackfs.c @@ -1167,7 +1167,7 @@ static ssize_t smk_write_net4addr(struct file *file, const char __user *buf, return -EPERM; if (*ppos != 0) return -EINVAL; - if (count < SMK_NETLBLADDRMIN) + if (count < SMK_NETLBLADDRMIN || count > PAGE_SIZE - 1) return -EINVAL;
data = memdup_user_nul(buf, count); @@ -1427,7 +1427,7 @@ static ssize_t smk_write_net6addr(struct file *file, const char __user *buf, return -EPERM; if (*ppos != 0) return -EINVAL; - if (count < SMK_NETLBLADDRMIN) + if (count < SMK_NETLBLADDRMIN || count > PAGE_SIZE - 1) return -EINVAL;
data = memdup_user_nul(buf, count); @@ -1834,6 +1834,10 @@ static ssize_t smk_write_ambient(struct file *file, const char __user *buf, if (!smack_privileged(CAP_MAC_ADMIN)) return -EPERM;
+ /* Enough data must be present */ + if (count == 0 || count > PAGE_SIZE) + return -EINVAL; + data = memdup_user_nul(buf, count); if (IS_ERR(data)) return PTR_ERR(data); @@ -2005,6 +2009,9 @@ static ssize_t smk_write_onlycap(struct file *file, const char __user *buf, if (!smack_privileged(CAP_MAC_ADMIN)) return -EPERM;
+ if (count > PAGE_SIZE) + return -EINVAL; + data = memdup_user_nul(buf, count); if (IS_ERR(data)) return PTR_ERR(data); @@ -2092,6 +2099,9 @@ static ssize_t smk_write_unconfined(struct file *file, const char __user *buf, if (!smack_privileged(CAP_MAC_ADMIN)) return -EPERM;
+ if (count > PAGE_SIZE) + return -EINVAL; + data = memdup_user_nul(buf, count); if (IS_ERR(data)) return PTR_ERR(data); @@ -2647,6 +2657,10 @@ static ssize_t smk_write_syslog(struct file *file, const char __user *buf, if (!smack_privileged(CAP_MAC_ADMIN)) return -EPERM;
+ /* Enough data must be present */ + if (count == 0 || count > PAGE_SIZE) + return -EINVAL; + data = memdup_user_nul(buf, count); if (IS_ERR(data)) return PTR_ERR(data); @@ -2739,10 +2753,13 @@ static ssize_t smk_write_relabel_self(struct file *file, const char __user *buf, return -EPERM;
/* + * No partial write. * Enough data must be present. */ if (*ppos != 0) return -EINVAL; + if (count == 0 || count > PAGE_SIZE) + return -EINVAL;
data = memdup_user_nul(buf, count); if (IS_ERR(data))
From: "Andrea Parri (Microsoft)" parri.andrea@gmail.com
[ Upstream commit e99c4afbee07e9323e9191a20b24d74dbf815bdf ]
__vmbus_open() and vmbus_teardown_gpadl() do not inizialite the memory for the vmbus_channel_open_channel and the vmbus_channel_gpadl_teardown objects they allocate respectively. These objects contain padding bytes and fields that are left uninitialized and that are later sent to the host, potentially leaking guest data. Zero initialize such fields to avoid leaking sensitive information to the host.
Reported-by: Juan Vazquez juvazq@microsoft.com Signed-off-by: Andrea Parri (Microsoft) parri.andrea@gmail.com Reviewed-by: Michael Kelley mikelley@microsoft.com Link: https://lore.kernel.org/r/20201209070827.29335-2-parri.andrea@gmail.com Signed-off-by: Wei Liu wei.liu@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hv/channel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c index fbdda9938039a..f9f04b5cd303f 100644 --- a/drivers/hv/channel.c +++ b/drivers/hv/channel.c @@ -548,7 +548,7 @@ static int __vmbus_open(struct vmbus_channel *newchannel, goto error_clean_ring;
/* Create and init the channel open message */ - open_info = kmalloc(sizeof(*open_info) + + open_info = kzalloc(sizeof(*open_info) + sizeof(struct vmbus_channel_open_channel), GFP_KERNEL); if (!open_info) { @@ -674,7 +674,7 @@ int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle) unsigned long flags; int ret;
- info = kmalloc(sizeof(*info) + + info = kzalloc(sizeof(*info) + sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL); if (!info) return -ENOMEM;
On Wed, Feb 24, 2021 at 07:51:56AM -0500, Sasha Levin wrote:
From: "Andrea Parri (Microsoft)" parri.andrea@gmail.com
[ Upstream commit e99c4afbee07e9323e9191a20b24d74dbf815bdf ]
__vmbus_open() and vmbus_teardown_gpadl() do not inizialite the memory for the vmbus_channel_open_channel and the vmbus_channel_gpadl_teardown objects they allocate respectively. These objects contain padding bytes and fields that are left uninitialized and that are later sent to the host, potentially leaking guest data. Zero initialize such fields to avoid leaking sensitive information to the host.
Reported-by: Juan Vazquez juvazq@microsoft.com Signed-off-by: Andrea Parri (Microsoft) parri.andrea@gmail.com Reviewed-by: Michael Kelley mikelley@microsoft.com Link: https://lore.kernel.org/r/20201209070827.29335-2-parri.andrea@gmail.com Signed-off-by: Wei Liu wei.liu@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org
Same here.
Andrea
drivers/hv/channel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c index fbdda9938039a..f9f04b5cd303f 100644 --- a/drivers/hv/channel.c +++ b/drivers/hv/channel.c @@ -548,7 +548,7 @@ static int __vmbus_open(struct vmbus_channel *newchannel, goto error_clean_ring; /* Create and init the channel open message */
- open_info = kmalloc(sizeof(*open_info) +
- open_info = kzalloc(sizeof(*open_info) + sizeof(struct vmbus_channel_open_channel), GFP_KERNEL); if (!open_info) {
@@ -674,7 +674,7 @@ int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle) unsigned long flags; int ret;
- info = kmalloc(sizeof(*info) +
- info = kzalloc(sizeof(*info) + sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL); if (!info) return -ENOMEM;
-- 2.27.0
From: "Andrea Parri (Microsoft)" parri.andrea@gmail.com
[ Upstream commit e4d221b42354b2e2ddb9187a806afb651eee2cda ]
An erroneous or malicious host could send multiple rescind messages for a same channel. In vmbus_onoffer_rescind(), the guest maps the channel ID to obtain a pointer to the channel object and it eventually releases such object and associated data. The host could time rescind messages and lead to an use-after-free. Add a new flag to the channel structure to make sure that only one instance of vmbus_onoffer_rescind() can get the reference to the channel object.
Reported-by: Juan Vazquez juvazq@microsoft.com Signed-off-by: Andrea Parri (Microsoft) parri.andrea@gmail.com Reviewed-by: Michael Kelley mikelley@microsoft.com Link: https://lore.kernel.org/r/20201209070827.29335-6-parri.andrea@gmail.com Signed-off-by: Wei Liu wei.liu@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hv/channel_mgmt.c | 12 ++++++++++++ include/linux/hyperv.h | 1 + 2 files changed, 13 insertions(+)
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index 1d44bb635bb84..a9f58840f85dc 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -1049,6 +1049,18 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr)
mutex_lock(&vmbus_connection.channel_mutex); channel = relid2channel(rescind->child_relid); + if (channel != NULL) { + /* + * Guarantee that no other instance of vmbus_onoffer_rescind() + * has got a reference to the channel object. Synchronize on + * &vmbus_connection.channel_mutex. + */ + if (channel->rescind_ref) { + mutex_unlock(&vmbus_connection.channel_mutex); + return; + } + channel->rescind_ref = true; + } mutex_unlock(&vmbus_connection.channel_mutex);
if (channel == NULL) { diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 1ce131f29f3b4..376f0f9e19650 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -786,6 +786,7 @@ struct vmbus_channel { u8 monitor_bit;
bool rescind; /* got rescind msg */ + bool rescind_ref; /* got rescind msg, got channel reference */ struct completion rescind_event;
u32 ringbuffer_gpadlhandle;
On Wed, Feb 24, 2021 at 07:51:57AM -0500, Sasha Levin wrote:
From: "Andrea Parri (Microsoft)" parri.andrea@gmail.com
[ Upstream commit e4d221b42354b2e2ddb9187a806afb651eee2cda ]
An erroneous or malicious host could send multiple rescind messages for a same channel. In vmbus_onoffer_rescind(), the guest maps the channel ID to obtain a pointer to the channel object and it eventually releases such object and associated data. The host could time rescind messages and lead to an use-after-free. Add a new flag to the channel structure to make sure that only one instance of vmbus_onoffer_rescind() can get the reference to the channel object.
Reported-by: Juan Vazquez juvazq@microsoft.com Signed-off-by: Andrea Parri (Microsoft) parri.andrea@gmail.com Reviewed-by: Michael Kelley mikelley@microsoft.com Link: https://lore.kernel.org/r/20201209070827.29335-6-parri.andrea@gmail.com Signed-off-by: Wei Liu wei.liu@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org
Same here.
Andrea
drivers/hv/channel_mgmt.c | 12 ++++++++++++ include/linux/hyperv.h | 1 + 2 files changed, 13 insertions(+)
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index 1d44bb635bb84..a9f58840f85dc 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -1049,6 +1049,18 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr) mutex_lock(&vmbus_connection.channel_mutex); channel = relid2channel(rescind->child_relid);
- if (channel != NULL) {
/*
* Guarantee that no other instance of vmbus_onoffer_rescind()
* has got a reference to the channel object. Synchronize on
* &vmbus_connection.channel_mutex.
*/
if (channel->rescind_ref) {
mutex_unlock(&vmbus_connection.channel_mutex);
return;
}
channel->rescind_ref = true;
- } mutex_unlock(&vmbus_connection.channel_mutex);
if (channel == NULL) { diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 1ce131f29f3b4..376f0f9e19650 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -786,6 +786,7 @@ struct vmbus_channel { u8 monitor_bit; bool rescind; /* got rescind msg */
- bool rescind_ref; /* got rescind msg, got channel reference */ struct completion rescind_event;
u32 ringbuffer_gpadlhandle; -- 2.27.0
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 8ade6d8b02b1ead741bd4f6c42921035caab6560 ]
Some Bay Trail systems: 1. Use a non CR version of the Bay Trail SoC 2. Contain at least 6 interrupt resources so that the platform_get_resource(pdev, IORESOURCE_IRQ, 5) check to workaround non CR systems which list their IPC IRQ at index 0 despite being non CR does not work 3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5
Add a DMI quirk table to check for the few known models with this issue, so that the right IPC IRQ index is used on these systems.
Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210120214957.140232-5-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/common/soc-intel-quirks.h | 25 +++++++++++++++++++++++ 1 file changed, 25 insertions(+)
diff --git a/sound/soc/intel/common/soc-intel-quirks.h b/sound/soc/intel/common/soc-intel-quirks.h index b07df3059926d..a93987ab7f4d7 100644 --- a/sound/soc/intel/common/soc-intel-quirks.h +++ b/sound/soc/intel/common/soc-intel-quirks.h @@ -11,6 +11,7 @@
#if IS_ENABLED(CONFIG_X86)
+#include <linux/dmi.h> #include <asm/cpu_device_id.h> #include <asm/intel-family.h> #include <asm/iosf_mbi.h> @@ -38,12 +39,36 @@ SOC_INTEL_IS_CPU(cml, KABYLAKE_L);
static inline bool soc_intel_is_byt_cr(struct platform_device *pdev) { + /* + * List of systems which: + * 1. Use a non CR version of the Bay Trail SoC + * 2. Contain at least 6 interrupt resources so that the + * platform_get_resource(pdev, IORESOURCE_IRQ, 5) check below + * succeeds + * 3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5 + * + * This needs to be here so that it can be shared between the SST and + * SOF drivers. We rely on the compiler to optimize this out in files + * where soc_intel_is_byt_cr is not used. + */ + static const struct dmi_system_id force_bytcr_table[] = { + { /* Lenovo Yoga Tablet 2 series */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_FAMILY, "YOGATablet2"), + }, + }, + {} + }; struct device *dev = &pdev->dev; int status = 0;
if (!soc_intel_is_byt()) return false;
+ if (dmi_check_system(force_bytcr_table)) + return true; + if (iosf_mbi_available()) { u32 bios_status;
From: Josef Bacik josef@toxicpanda.com
[ Upstream commit 4f4317c13a40194940acf4a71670179c4faca2b5 ]
While doing error injection I would sometimes get a corrupt file system. This is because I was injecting errors at btrfs_search_slot, but would only do it one time per stack. This uncovered a problem in commit_fs_roots, where if we get an error we would just break. However we're in a nested loop, the first loop being a loop to find all the dirty fs roots, and then subsequent root updates would succeed clearing the error value.
This isn't likely to happen in real scenarios, however we could potentially get a random ENOMEM once and then not again, and we'd end up with a corrupted file system. Fix this by moving the error checking around a bit to the main loop, as this is the only place where something will fail, and return the error as soon as it occurs.
With this patch my reproducer no longer corrupts the file system.
Signed-off-by: Josef Bacik josef@toxicpanda.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/transaction.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 96dbfc011f45d..261a50708cb89 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1320,7 +1320,6 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans) struct btrfs_root *gang[8]; int i; int ret; - int err = 0;
spin_lock(&fs_info->fs_roots_radix_lock); while (1) { @@ -1332,6 +1331,8 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans) break; for (i = 0; i < ret; i++) { struct btrfs_root *root = gang[i]; + int ret2; + radix_tree_tag_clear(&fs_info->fs_roots_radix, (unsigned long)root->root_key.objectid, BTRFS_ROOT_TRANS_TAG); @@ -1353,17 +1354,17 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans) root->node); }
- err = btrfs_update_root(trans, fs_info->tree_root, + ret2 = btrfs_update_root(trans, fs_info->tree_root, &root->root_key, &root->root_item); + if (ret2) + return ret2; spin_lock(&fs_info->fs_roots_radix_lock); - if (err) - break; btrfs_qgroup_free_meta_all_pertrans(root); } } spin_unlock(&fs_info->fs_roots_radix_lock); - return err; + return 0; }
/*
From: Nikolay Borisov nborisov@suse.com
[ Upstream commit 9db4dc241e87fccd8301357d5ef908f40b50f2e3 ]
It's currently u64 which gets instantly translated either to LONG_MAX (if U64_MAX is passed) or cast to an unsigned long (which is in fact, wrong because writeback_control::nr_to_write is a signed, long type).
Just convert the function's argument to be long time which obviates the need to manually convert u64 value to a long. Adjust all call sites which pass U64_MAX to pass LONG_MAX. Finally ensure that in shrink_delalloc the u64 is converted to a long without overflowing, resulting in a negative number.
Reviewed-by: Josef Bacik josef@toxicpanda.com Signed-off-by: Nikolay Borisov nborisov@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/ctree.h | 2 +- fs/btrfs/dev-replace.c | 2 +- fs/btrfs/inode.c | 6 +++--- fs/btrfs/ioctl.c | 2 +- fs/btrfs/space-info.c | 3 ++- 5 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 30ea9780725ff..2d1cec2e7f754 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -3004,7 +3004,7 @@ int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans, u32 min_type);
int btrfs_start_delalloc_snapshot(struct btrfs_root *root); -int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, u64 nr, +int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, long nr, bool in_reclaim_context); int btrfs_set_extent_delalloc(struct btrfs_inode *inode, u64 start, u64 end, unsigned int extra_bits, diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c index d297804631829..711b24613c22b 100644 --- a/fs/btrfs/dev-replace.c +++ b/fs/btrfs/dev-replace.c @@ -703,7 +703,7 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info, * flush all outstanding I/O and inode extent mappings before the * copy operation is declared as being finished */ - ret = btrfs_start_delalloc_roots(fs_info, U64_MAX, false); + ret = btrfs_start_delalloc_roots(fs_info, LONG_MAX, false); if (ret) { mutex_unlock(&dev_replace->lock_finishing_cancel_unmount); return ret; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index acc47e2ffb46b..b0770288fdcdd 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -9485,11 +9485,11 @@ int btrfs_start_delalloc_snapshot(struct btrfs_root *root) return start_delalloc_inodes(root, &wbc, true, false); }
-int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, u64 nr, +int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, long nr, bool in_reclaim_context) { struct writeback_control wbc = { - .nr_to_write = (nr == U64_MAX) ? LONG_MAX : (unsigned long)nr, + .nr_to_write = nr, .sync_mode = WB_SYNC_NONE, .range_start = 0, .range_end = LLONG_MAX, @@ -9511,7 +9511,7 @@ int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, u64 nr, * Reset nr_to_write here so we know that we're doing a full * flush. */ - if (nr == U64_MAX) + if (nr == LONG_MAX) wbc.nr_to_write = LONG_MAX;
root = list_first_entry(&splice, struct btrfs_root, diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index bd46e107f955e..5122961b35f41 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -4940,7 +4940,7 @@ long btrfs_ioctl(struct file *file, unsigned int case BTRFS_IOC_SYNC: { int ret;
- ret = btrfs_start_delalloc_roots(fs_info, U64_MAX, false); + ret = btrfs_start_delalloc_roots(fs_info, LONG_MAX, false); if (ret) return ret; ret = btrfs_sync_fs(inode->i_sb, 1); diff --git a/fs/btrfs/space-info.c b/fs/btrfs/space-info.c index e8347461c8ddd..84fb94e78a8ff 100644 --- a/fs/btrfs/space-info.c +++ b/fs/btrfs/space-info.c @@ -532,7 +532,8 @@ static void shrink_delalloc(struct btrfs_fs_info *fs_info,
loops = 0; while ((delalloc_bytes || dio_bytes) && loops < 3) { - u64 nr_pages = min(delalloc_bytes, to_reclaim) >> PAGE_SHIFT; + u64 temp = min(delalloc_bytes, to_reclaim) >> PAGE_SHIFT; + long nr_pages = min_t(u64, temp, LONG_MAX);
btrfs_start_delalloc_roots(fs_info, nr_pages, true);
From: Nirmoy Das nirmoy.das@amd.com
[ Upstream commit 8c0225d79273968a65e73a4204fba023ae02714d ]
For high priority compute to work properly we need to enable wave limiting on gfx pipe. Wave limiting is done through writing into mmSPI_WCL_PIPE_PERCENT_GFX register. Enable only one high priority compute queue to avoid race condition between multiple high priority compute queues writing that register simultaneously.
Signed-off-by: Nirmoy Das nirmoy.das@amd.com Acked-by: Christian König christian.koenig@amd.com Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c | 15 ++++++++------- drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h | 2 +- drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 6 ++---- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 6 ++---- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 7 ++----- 5 files changed, 15 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c index c485ec86804e5..034a0f3b4c660 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c @@ -193,15 +193,16 @@ static bool amdgpu_gfx_is_multipipe_capable(struct amdgpu_device *adev) }
bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev, - int pipe, int queue) + struct amdgpu_ring *ring) { - bool multipipe_policy = amdgpu_gfx_is_multipipe_capable(adev); - int cond; - /* Policy: alternate between normal and high priority */ - cond = multipipe_policy ? pipe : queue; - - return ((cond % 2) != 0); + /* Policy: use 1st queue as high priority compute queue if we + * have more than one compute queue. + */ + if (adev->gfx.num_compute_rings > 1 && + ring == &adev->gfx.compute_ring[0]) + return true;
+ return false; }
void amdgpu_gfx_compute_queue_acquire(struct amdgpu_device *adev) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h index f353a5b71804e..6e0cba6f4bdcd 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h @@ -373,7 +373,7 @@ void amdgpu_queue_mask_bit_to_mec_queue(struct amdgpu_device *adev, int bit, bool amdgpu_gfx_is_mec_queue_enabled(struct amdgpu_device *adev, int mec, int pipe, int queue); bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev, - int pipe, int queue); + struct amdgpu_ring *ring); int amdgpu_gfx_me_queue_to_bit(struct amdgpu_device *adev, int me, int pipe, int queue); void amdgpu_gfx_bit_to_me_queue(struct amdgpu_device *adev, int bit, diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c index 4ebb43e090999..4cc83b399b66b 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c @@ -4334,8 +4334,7 @@ static int gfx_v10_0_compute_ring_init(struct amdgpu_device *adev, int ring_id, irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP + ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec) + ring->pipe; - hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe, - ring->queue) ? + hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ? AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL; /* type-2 packets are deprecated on MEC, use type-3 instead */ r = amdgpu_ring_init(adev, ring, 1024, @@ -6361,8 +6360,7 @@ static void gfx_v10_0_compute_mqd_set_priority(struct amdgpu_ring *ring, struct struct amdgpu_device *adev = ring->adev;
if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) { - if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe, - ring->queue)) { + if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) { mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH; mqd->cp_hqd_queue_priority = AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM; diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index c36258d56b445..f2f603fa0288d 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -1915,8 +1915,7 @@ static int gfx_v8_0_compute_ring_init(struct amdgpu_device *adev, int ring_id, + ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec) + ring->pipe;
- hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe, - ring->queue) ? + hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ? AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_RING_PRIO_DEFAULT; /* type-2 packets are deprecated on MEC, use type-3 instead */ r = amdgpu_ring_init(adev, ring, 1024, @@ -4434,8 +4433,7 @@ static void gfx_v8_0_mqd_set_priority(struct amdgpu_ring *ring, struct vi_mqd *m struct amdgpu_device *adev = ring->adev;
if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) { - if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe, - ring->queue)) { + if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) { mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH; mqd->cp_hqd_queue_priority = AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM; diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index 957c12b727676..fa843bda70ba3 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -2228,8 +2228,7 @@ static int gfx_v9_0_compute_ring_init(struct amdgpu_device *adev, int ring_id, irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP + ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec) + ring->pipe; - hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe, - ring->queue) ? + hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ? AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL; /* type-2 packets are deprecated on MEC, use type-3 instead */ return amdgpu_ring_init(adev, ring, 1024, @@ -3384,9 +3383,7 @@ static void gfx_v9_0_mqd_set_priority(struct amdgpu_ring *ring, struct v9_mqd *m struct amdgpu_device *adev = ring->adev;
if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) { - if (amdgpu_gfx_is_high_priority_compute_queue(adev, - ring->pipe, - ring->queue)) { + if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) { mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH; mqd->cp_hqd_queue_priority = AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
From: Jim Mattson jmattson@google.com
[ Upstream commit b3c3361fe325074d4144c29d46daae4fc5a268d5 ]
Cascade Lake Xeon parts have the same model number as Skylake Xeon parts, so they are tagged with the intel_pebs_isolation quirk. However, as with Skylake Xeon H0 stepping parts, the PEBS isolation issue is fixed in all microcode versions.
Add the Cascade Lake Xeon steppings (5, 6, and 7) to the isolation_ucodes[] table so that these parts benefit from Andi's optimization in commit 9b545c04abd4f ("perf/x86/kvm: Avoid unnecessary work in guest filtering").
Signed-off-by: Jim Mattson jmattson@google.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Reviewed-by: Andi Kleen ak@linux.intel.com Link: https://lkml.kernel.org/r/20210205191324.2889006-1-jmattson@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/events/intel/core.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index 7d4d89fa8647a..aaa7bffdb20f5 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -4384,6 +4384,9 @@ static const struct x86_cpu_desc isolation_ucodes[] = { INTEL_CPU_DESC(INTEL_FAM6_BROADWELL_X, 2, 0x0b000014), INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X, 3, 0x00000021), INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X, 4, 0x00000000), + INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X, 5, 0x00000000), + INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X, 6, 0x00000000), + INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X, 7, 0x00000000), INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_L, 3, 0x0000007c), INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE, 3, 0x0000007c), INTEL_CPU_DESC(INTEL_FAM6_KABYLAKE, 9, 0x0000004e),
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit 8caf37e2be761688c396c609880936a807af490f ]
Use the same style for all quirks to avoid misses and errors
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Guennadi Liakhovetski guennadi.liakhovetski@intel.com Reviewed-by: Kai Vehmanen kai.vehmanen@linux.intel.com Link: https://lore.kernel.org/r/20210208233336.59449-3-pierre-louis.bossart@linux.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/sof_sdw.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index a8d43c87cb5a2..2d2b0519eee25 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -113,9 +113,10 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Tiger Lake Client Platform"), }, - .driver_data = (void *)(SOF_RT711_JD_SRC_JD1 | - SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC | - SOF_SSP_PORT(SOF_I2S_SSP2)), + .driver_data = (void *)(SOF_SDW_TGL_HDMI | + SOF_RT711_JD_SRC_JD1 | + SOF_SDW_PCH_DMIC | + SOF_SSP_PORT(SOF_I2S_SSP2)), }, { .callback = sof_sdw_quirk_cb, @@ -139,7 +140,8 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = { DMI_MATCH(DMI_SYS_VENDOR, "Google"), DMI_MATCH(DMI_PRODUCT_NAME, "Volteer"), }, - .driver_data = (void *)(SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC | + .driver_data = (void *)(SOF_SDW_TGL_HDMI | + SOF_SDW_PCH_DMIC | SOF_SDW_FOUR_SPK), }, { @@ -148,7 +150,8 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = { DMI_MATCH(DMI_SYS_VENDOR, "Google"), DMI_MATCH(DMI_PRODUCT_NAME, "Ripto"), }, - .driver_data = (void *)(SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC | + .driver_data = (void *)(SOF_SDW_TGL_HDMI | + SOF_SDW_PCH_DMIC | SOF_SDW_FOUR_SPK), },
From: Rander Wang rander.wang@intel.com
[ Upstream commit f88dcb9b98d3f86ead04d2453475267910448bb8 ]
Current driver create DMIC dai based on quirk for each platforms, so we need to add quirk for new platforms. Now driver reports DMIC number to machine driver and machine driver can create DMIC dai based on this information. The old check is reserved for some platforms may be failed to set the DMIC number in BIOS.
Reviewed-by: Bard Liao bard.liao@intel.com Signed-off-by: Rander Wang rander.wang@intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20210208233336.59449-6-pierre-louis.bossart@linux.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/sof_sdw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index 2d2b0519eee25..a30c1d7b3d95f 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -923,7 +923,7 @@ static int sof_card_dai_links_create(struct device *dev, ctx->idisp_codec = true;
/* enable dmic01 & dmic16k */ - dmic_num = (sof_sdw_quirk & SOF_SDW_PCH_DMIC) ? 2 : 0; + dmic_num = (sof_sdw_quirk & SOF_SDW_PCH_DMIC || mach_params->dmic_num) ? 2 : 0; comp_num += dmic_num;
dev_dbg(dev, "sdw %d, ssp %d, dmic %d, hdmi %d", sdw_be_num, ssp_num,
From: Gao Xiang hsiangkao@redhat.com
[ Upstream commit bde545295b710bdd13a0fcd4b9fddd2383eeeb3a ]
syzbot generated a crafted bitszbits which can be shifted out-of-bounds[1]. So directly print unsupported blkszbits instead of blksize.
[1] https://lore.kernel.org/r/000000000000c72ddd05b9444d2f@google.com
Link: https://lore.kernel.org/r/20210120013016.14071-1-hsiangkao@aol.com Reported-by: syzbot+c68f467cd7c45860e8d4@syzkaller.appspotmail.com Reviewed-by: Chao Yu yuchao0@huawei.com Signed-off-by: Gao Xiang hsiangkao@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/erofs/super.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/erofs/super.c b/fs/erofs/super.c index be10b16ea66ee..d5a6b9b888a56 100644 --- a/fs/erofs/super.c +++ b/fs/erofs/super.c @@ -158,8 +158,8 @@ static int erofs_read_superblock(struct super_block *sb) blkszbits = dsb->blkszbits; /* 9(512 bytes) + LOG_SECTORS_PER_BLOCK == LOG_BLOCK_SIZE */ if (blkszbits != LOG_BLOCK_SIZE) { - erofs_err(sb, "blksize %u isn't supported on this platform", - 1 << blkszbits); + erofs_err(sb, "blkszbits %u isn't supported on this platform", + blkszbits); goto out; }
From: John David Anglin dave.anglin@bell.net
[ Upstream commit 31680c1d1595a59e17c14ec036b192a95f8e5f4a ]
Bump 64-bit IRQ stack size to 64 KB.
I had a kernel IRQ stack overflow on the mx3210 debian buildd machine. This patch increases the 64-bit IRQ stack size to 64 KB. The 64-bit stack size needs to be larger than the 32-bit stack size since registers are twice as big.
Signed-off-by: John David Anglin dave.anglin@bell.net Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/parisc/kernel/irq.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index e76c866199493..60f5829d476f5 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -376,7 +376,11 @@ static inline int eirr_to_irq(unsigned long eirr) /* * IRQ STACK - used for irq handler */ +#ifdef CONFIG_64BIT +#define IRQ_STACK_SIZE (4096 << 4) /* 64k irq stack size */ +#else #define IRQ_STACK_SIZE (4096 << 3) /* 32k irq stack size */ +#endif
union irq_stack_union { unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)];
From: Jan Beulich jbeulich@suse.com
[ Upstream commit 871997bc9e423f05c7da7c9178e62dde5df2a7f8 ]
The function uses a goto-based loop, which may lead to an earlier error getting discarded by a later iteration. Exit this ad-hoc loop when an error was encountered.
The out-of-memory error path additionally fails to fill a structure field looked at by xen_blkbk_unmap_prepare() before inspecting the handle which does get properly set (to BLKBACK_INVALID_HANDLE).
Since the earlier exiting from the ad-hoc loop requires the same field filling (invalidation) as that on the out-of-memory path, fold both paths. While doing so, drop the pr_alert(), as extra log messages aren't going to help the situation (the kernel will log oom conditions already anyway).
This is XSA-365.
Signed-off-by: Jan Beulich jbeulich@suse.com Reviewed-by: Juergen Gross jgross@suse.com Reviewed-by: Julien Grall julien@xen.org Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/xen-blkback/blkback.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index 9ebf53903d7bf..9301de1386436 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -794,8 +794,13 @@ static int xen_blkbk_map(struct xen_blkif_ring *ring, pages[i]->persistent_gnt = persistent_gnt; } else { if (gnttab_page_cache_get(&ring->free_pages, - &pages[i]->page)) - goto out_of_memory; + &pages[i]->page)) { + gnttab_page_cache_put(&ring->free_pages, + pages_to_gnt, + segs_to_map); + ret = -ENOMEM; + goto out; + } addr = vaddr(pages[i]->page); pages_to_gnt[segs_to_map] = pages[i]->page; pages[i]->persistent_gnt = NULL; @@ -882,17 +887,18 @@ static int xen_blkbk_map(struct xen_blkif_ring *ring, } segs_to_map = 0; last_map = map_until; - if (map_until != num) + if (!ret && map_until != num) goto again;
- return ret; - -out_of_memory: - pr_alert("%s: out of memory\n", __func__); - gnttab_page_cache_put(&ring->free_pages, pages_to_gnt, segs_to_map); - for (i = last_map; i < num; i++) +out: + for (i = last_map; i < num; i++) { + /* Don't zap current batch's valid persistent grants. */ + if(i >= last_map + segs_to_map) + pages[i]->persistent_gnt = NULL; pages[i]->handle = BLKBACK_INVALID_HANDLE; - return -ENOMEM; + } + + return ret; }
static int xen_blkbk_map_seg(struct pending_req *pending_req)
From: Juri Lelli juri.lelli@redhat.com
[ Upstream commit 156ec6f42b8d300dbbf382738ff35c8bad8f4c3a ]
Hung tasks and RCU stall cases were reported on systems which were not 100% busy. Investigation of such unexpected cases (no sign of potential starvation caused by tasks hogging the system) pointed out that the periodic sched tick timer wasn't serviced anymore after a certain point and that caused all machinery that depends on it (timers, RCU, etc.) to stop working as well. This issues was however only reproducible if HRTICK was enabled.
Looking at core dumps it was found that the rbtree of the hrtimer base used also for the hrtick was corrupted (i.e. next as seen from the base root and actual leftmost obtained by traversing the tree are different). Same base is also used for periodic tick hrtimer, which might get "lost" if the rbtree gets corrupted.
Much alike what described in commit 1f71addd34f4c ("tick/sched: Do not mess with an enqueued hrtimer") there is a race window between hrtimer_set_expires() in hrtick_start and hrtimer_start_expires() in __hrtick_restart() in which the former might be operating on an already queued hrtick hrtimer, which might lead to corruption of the base.
Use hrtick_start() (which removes the timer before enqueuing it back) to ensure hrtick hrtimer reprogramming is entirely guarded by the base lock, so that no race conditions can occur.
Signed-off-by: Juri Lelli juri.lelli@redhat.com Signed-off-by: Luis Claudio R. Goncalves lgoncalv@redhat.com Signed-off-by: Daniel Bristot de Oliveira bristot@redhat.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Signed-off-by: Ingo Molnar mingo@kernel.org Link: https://lkml.kernel.org/r/20210208073554.14629-2-juri.lelli@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/sched/core.c | 8 +++----- kernel/sched/sched.h | 1 + 2 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 269165bf440af..3a150445e0cba 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -363,8 +363,9 @@ static enum hrtimer_restart hrtick(struct hrtimer *timer) static void __hrtick_restart(struct rq *rq) { struct hrtimer *timer = &rq->hrtick_timer; + ktime_t time = rq->hrtick_time;
- hrtimer_start_expires(timer, HRTIMER_MODE_ABS_PINNED_HARD); + hrtimer_start(timer, time, HRTIMER_MODE_ABS_PINNED_HARD); }
/* @@ -388,7 +389,6 @@ static void __hrtick_start(void *arg) void hrtick_start(struct rq *rq, u64 delay) { struct hrtimer *timer = &rq->hrtick_timer; - ktime_t time; s64 delta;
/* @@ -396,9 +396,7 @@ void hrtick_start(struct rq *rq, u64 delay) * doesn't make sense and can cause timer DoS. */ delta = max_t(s64, delay, 10000LL); - time = ktime_add_ns(timer->base->get_time(), delta); - - hrtimer_set_expires(timer, time); + rq->hrtick_time = ktime_add_ns(timer->base->get_time(), delta);
if (rq == this_rq()) __hrtick_restart(rq); diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index c122176c627ec..fac1b121d1130 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -1018,6 +1018,7 @@ struct rq { call_single_data_t hrtick_csd; #endif struct hrtimer hrtick_timer; + ktime_t hrtick_time; #endif
#ifdef CONFIG_SCHEDSTATS
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit bdea43fc0436c9e98fdfe151c2ed8a3fc7277404 ]
The Estar Beauty HD MID 7316R tablet almost fully works with out default settings. The only problem is that it has only 1 speaker so any sounds only playing on the right channel get lost.
Add a quirk for this model using the default settings + MONO_SPEAKER.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20210216213555.36555-2-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index db3633de9122f..be874d2a109b9 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -515,6 +515,16 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_MONO_SPEAKER | BYT_RT5640_MCLK_EN), }, + { /* Estar Beauty HD MID 7316R */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Estar"), + DMI_MATCH(DMI_PRODUCT_NAME, "eSTAR BEAUTY HD Intel Quad core"), + }, + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit e1317cc9ca4ac20262895fddb065ffda4fc29cfb ]
The Voyo Winpad A15 tablet uses a Bay Trail (non CR) SoC, so it is using SSP2 (AIF1) and it mostly works with the defaults. But instead of using DMIC1 it is using an analog mic on IN1, add a quirk for this.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20210216213555.36555-3-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index be874d2a109b9..626677fa1b5c0 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -799,6 +799,20 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, + { /* Voyo Winpad A15 */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), + /* Above strings are too generic, also match on BIOS date */ + DMI_MATCH(DMI_BIOS_DATE, "11/20/2014"), + }, + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_MCLK_EN), + }, { /* Catch-all for generic Insyde tablets, must be last */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit df8359c512fa770ffa6b0b0309807d9b9825a47f ]
Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has a jack-detect switch which reads 1/high when a jack is inserted, rather then using the standard active-low setup which most jack-detect switches use. All other settings are using the defaults.
Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV flags for this.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20210216213555.36555-4-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5651.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 688b5e0a49e32..bf8b87d45cb0a 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -435,6 +435,19 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { BYT_RT5651_SSP0_AIF1 | BYT_RT5651_MONO_SPEAKER), }, + { + /* Jumper EZpad 7 */ + .callback = byt_rt5651_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Jumper"), + DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"), + /* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */ + DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"), + }, + .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | + BYT_RT5651_IN2_MAP | + BYT_RT5651_JD_NOT_INV), + }, { /* KIANO SlimNote 14.2 */ .callback = byt_rt5651_quirk_cb,
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit c58947af08aedbdee0fce5ea6e6bf3e488ae0e2c ]
The Acer One S1002 tablet is using an analog mic on IN1 and has its jack-detect connected to JD2_IN4N, instead of using the default IN3 for its internal mic and JD1_IN4P for jack-detect.
Note it is also using AIF2 instead of AIF1 which is somewhat unusual, this is correctly advertised in the ACPI CHAN package, so the speakers do work without the quirk.
Add a quirk for the mic and jack-detect settings.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20210216213555.36555-5-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 626677fa1b5c0..3af4cb87032ce 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -402,6 +402,19 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { /* Acer One 10 S1002 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "One S1002"), + }, + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF2 | + BYT_RT5640_MCLK_EN), + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
linux-stable-mirror@lists.linaro.org