[PATCH] iio: invensense: fix multiple odr switch when FIFO is off - Linux-stable-mirror

17 Oct 2024

From: Jean-Baptiste Maneyrol jean-baptiste.maneyrol@tdk.com
When multiple ODR switch happens during FIFO off, the change could
not be taken into account if you get back to previous FIFO on value.
For example, if you run sensor buffer at 50Hz, stop, change to
200Hz, then back to 50Hz and restart buffer, data will be timestamped
at 200Hz. This due to testing against mult and not new_mult.
To prevent this, let's just run apply_odr automatically when FIFO is
off. It will also simplify driver code.
Update inv_mpu6050 and inv_icm42600 to delete now useless apply_odr.
Fixes: 95444b9eeb8c ("iio: invensense: fix odr switching to same value")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol jean-baptiste.maneyrol@tdk.com
---
 drivers/iio/common/inv_sensors/inv_sensors_timestamp.c | 4 ++++
 drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c      | 1 -
 drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c       | 1 -
 drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c          | 1 -
 4 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c b/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c
index f44458c380d92823ce2e7e5f78ca877ea4c06118..37d0bdaa8d824f79dcd2f341be7501d249926951 100644
--- a/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c
+++ b/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c
@@ -70,6 +70,10 @@ int inv_sensors_timestamp_update_odr(struct inv_sensors_timestamp *ts,
    if (mult != ts->mult)
    	ts->new_mult = mult;
+	/* When FIFO is off, directly apply the new ODR */
+	if (!fifo)
+		inv_sensors_timestamp_apply_odr(ts, 0, 0, 0);
+
    return 0;
 }
 EXPORT_SYMBOL_NS_GPL(inv_sensors_timestamp_update_odr, IIO_INV_SENSORS_TIMESTAMP);
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
index 56ac198142500a2e1fc40b62cdd465cc736d8bf0..d061a64ebbf71859a3bc44644a14137dff0f9efe 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
@@ -229,7 +229,6 @@ static int inv_icm42600_accel_update_scan_mode(struct iio_dev *indio_dev,
    }
/* update data FIFO write */
-	inv_sensors_timestamp_apply_odr(ts, 0, 0, 0);
    ret = inv_icm42600_buffer_set_fifo_en(st, fifo_en | st->fifo.en);
out_unlock:
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c
index 938af5b640b00f58d2b8185f752c4755edfb0d25..f1e5a9648c4f5dd34f40136d02c72c90473eff37 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c
@@ -128,7 +128,6 @@ static int inv_icm42600_gyro_update_scan_mode(struct iio_dev *indio_dev,
    }
/* update data FIFO write */
-	inv_sensors_timestamp_apply_odr(ts, 0, 0, 0);
    ret = inv_icm42600_buffer_set_fifo_en(st, fifo_en | st->fifo.en);
out_unlock:
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
index 3bfeabab0ec4f6fa28fbbcd47afe92af5b8a58e2..5b1088cc3704f1ad1288a0d65b2f957b91455d7f 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
@@ -112,7 +112,6 @@ int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable)
    if (enable) {
    	/* reset timestamping */
    	inv_sensors_timestamp_reset(&st->timestamp);
-		inv_sensors_timestamp_apply_odr(&st->timestamp, 0, 0, 0);
    	/* reset FIFO */
    	d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_RST;
    	ret = regmap_write(st->map, st->reg->user_ctrl, d);
---
base-commit: c3e9df514041ec6c46be83801b1891392f4522f7
change-id: 20241017-invn-inv-sensors-timestamp-fix-switch-fifo-off-3f29110e95d0
Best regards,
-- 
Jean-Baptiste Maneyrol jean-baptiste.maneyrol@tdk.com




    