[PATCH AUTOSEL 4.19 01/23] net: fec: ptp: avoid register access when ipg clock is disabled
From: Heiko Thiery heiko.thiery@gmail.com
[ Upstream commit 6a4d7234ae9a3bb31181f348ade9bbdb55aeb5c5 ]
When accessing the timecounter register on an i.MX8MQ the kernel hangs. This is only the case when the interface is down. This can be reproduced by reading with 'phc_ctrl eth0 get'.
Like described in the change in 91c0d987a9788dcc5fe26baafd73bf9242b68900 the igp clock is disabled when the interface is down and leads to a system hang.
So we check if the ptp clock status before reading the timecounter register.
Signed-off-by: Heiko Thiery heiko.thiery@gmail.com Acked-by: Richard Cochran richardcochran@gmail.com Link: https://lore.kernel.org/r/20210225211514.9115-1-heiko.thiery@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/fec_ptp.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c index 7e892b1cbd3d..09a762eb4f09 100644 --- a/drivers/net/ethernet/freescale/fec_ptp.c +++ b/drivers/net/ethernet/freescale/fec_ptp.c @@ -382,9 +382,16 @@ static int fec_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) u64 ns; unsigned long flags;
+ mutex_lock(&adapter->ptp_clk_mutex); + /* Check the ptp clock */ + if (!adapter->ptp_clk_on) { + mutex_unlock(&adapter->ptp_clk_mutex); + return -EINVAL; + } spin_lock_irqsave(&adapter->tmreg_lock, flags); ns = timecounter_read(&adapter->tc); spin_unlock_irqrestore(&adapter->tmreg_lock, flags); + mutex_unlock(&adapter->ptp_clk_mutex);
*ts = ns_to_timespec64(ns);
From: Michael Ellerman mpe@ellerman.id.au
[ Upstream commit eead089311f4d935ab5d1d8fbb0c42ad44699ada ]
lkp reported a build error in fsp2.o:
CC arch/powerpc/platforms/44x/fsp2.o {standard input}:577: Error: unsupported relocation against base
Which comes from:
pr_err("GESR0: 0x%08x\n", mfdcr(base + PLB4OPB_GESR0));
Where our mfdcr() macro is stringifying "base + PLB4OPB_GESR0", and passing that to the assembler, which obviously doesn't work.
The mfdcr() macro already checks that the argument is constant using __builtin_constant_p(), and if not calls the out-of-line version of mfdcr(). But in this case GCC is smart enough to notice that "base + PLB4OPB_GESR0" will be constant, even though it's not something we can immediately stringify into a register number.
Segher pointed out that passing the register number to the inline asm as a constant would be better, and in fact it fixes the build error, presumably because it gives GCC a chance to resolve the value.
While we're at it, change mtdcr() similarly.
Reported-by: kernel test robot lkp@intel.com Suggested-by: Segher Boessenkool segher@kernel.crashing.org Signed-off-by: Michael Ellerman mpe@ellerman.id.au Acked-by: Feng Tang feng.tang@intel.com Link: https://lore.kernel.org/r/20210218123058.748882-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/include/asm/dcr-native.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/dcr-native.h b/arch/powerpc/include/asm/dcr-native.h index 151dff555f50..9d9e323f5e9b 100644 --- a/arch/powerpc/include/asm/dcr-native.h +++ b/arch/powerpc/include/asm/dcr-native.h @@ -66,8 +66,8 @@ static inline void mtdcrx(unsigned int reg, unsigned int val) #define mfdcr(rn) \ ({unsigned int rval; \ if (__builtin_constant_p(rn) && rn < 1024) \ - asm volatile("mfdcr %0," __stringify(rn) \ - : "=r" (rval)); \ + asm volatile("mfdcr %0, %1" : "=r" (rval) \ + : "n" (rn)); \ else if (likely(cpu_has_feature(CPU_FTR_INDEXED_DCR))) \ rval = mfdcrx(rn); \ else \ @@ -77,8 +77,8 @@ static inline void mtdcrx(unsigned int reg, unsigned int val) #define mtdcr(rn, v) \ do { \ if (__builtin_constant_p(rn) && rn < 1024) \ - asm volatile("mtdcr " __stringify(rn) ",%0" \ - : : "r" (v)); \ + asm volatile("mtdcr %0, %1" \ + : : "n" (rn), "r" (v)); \ else if (likely(cpu_has_feature(CPU_FTR_INDEXED_DCR))) \ mtdcrx(rn, v); \ else \
From: Tong Zhang ztong0001@gmail.com
[ Upstream commit 4deb550bc3b698a1f03d0332cde3df154d1b6c1e ]
label err_eni_release is reachable when eni_start() fail. In eni_start() it calls dev->phy->start() in the last step, if start() fail we don't need to call phy->stop(), if start() is never called, we neither need to call phy->stop(), otherwise null-ptr-deref will happen.
In order to fix this issue, don't call phy->stop() in label err_eni_release
[ 4.875714] ================================================================== [ 4.876091] BUG: KASAN: null-ptr-deref in suni_stop+0x47/0x100 [suni] [ 4.876433] Read of size 8 at addr 0000000000000030 by task modprobe/95 [ 4.876778] [ 4.876862] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #2 [ 4.877290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd94 [ 4.877876] Call Trace: [ 4.878009] dump_stack+0x7d/0xa3 [ 4.878191] kasan_report.cold+0x10c/0x10e [ 4.878410] ? __slab_free+0x2f0/0x340 [ 4.878612] ? suni_stop+0x47/0x100 [suni] [ 4.878832] suni_stop+0x47/0x100 [suni] [ 4.879043] eni_do_release+0x3b/0x70 [eni] [ 4.879269] eni_init_one.cold+0x1152/0x1747 [eni] [ 4.879528] ? _raw_spin_lock_irqsave+0x7b/0xd0 [ 4.879768] ? eni_ioctl+0x270/0x270 [eni] [ 4.879990] ? __mutex_lock_slowpath+0x10/0x10 [ 4.880226] ? eni_ioctl+0x270/0x270 [eni] [ 4.880448] local_pci_probe+0x6f/0xb0 [ 4.880650] pci_device_probe+0x171/0x240 [ 4.880864] ? pci_device_remove+0xe0/0xe0 [ 4.881086] ? kernfs_create_link+0xb6/0x110 [ 4.881315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 4.881594] really_probe+0x161/0x420 [ 4.881791] driver_probe_device+0x6d/0xd0 [ 4.882010] device_driver_attach+0x82/0x90 [ 4.882233] ? device_driver_attach+0x90/0x90 [ 4.882465] __driver_attach+0x60/0x100 [ 4.882671] ? device_driver_attach+0x90/0x90 [ 4.882903] bus_for_each_dev+0xe1/0x140 [ 4.883114] ? subsys_dev_iter_exit+0x10/0x10 [ 4.883346] ? klist_node_init+0x61/0x80 [ 4.883557] bus_add_driver+0x254/0x2a0 [ 4.883764] driver_register+0xd3/0x150 [ 4.883971] ? 0xffffffffc0038000 [ 4.884149] do_one_initcall+0x84/0x250 [ 4.884355] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 4.884674] ? unpoison_range+0xf/0x30 [ 4.884875] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.885150] ? unpoison_range+0xf/0x30 [ 4.885352] ? unpoison_range+0xf/0x30 [ 4.885557] do_init_module+0xf8/0x350 [ 4.885760] load_module+0x3fe6/0x4340 [ 4.885960] ? vm_unmap_ram+0x1d0/0x1d0 [ 4.886166] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.886441] ? module_frob_arch_sections+0x20/0x20 [ 4.886697] ? __do_sys_finit_module+0x108/0x170 [ 4.886941] __do_sys_finit_module+0x108/0x170 [ 4.887178] ? __ia32_sys_init_module+0x40/0x40 [ 4.887419] ? file_open_root+0x200/0x200 [ 4.887634] ? do_sys_open+0x85/0xe0 [ 4.887826] ? filp_open+0x50/0x50 [ 4.888009] ? fpregs_assert_state_consistent+0x4d/0x60 [ 4.888287] ? exit_to_user_mode_prepare+0x2f/0x130 [ 4.888547] do_syscall_64+0x33/0x40 [ 4.888739] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 4.889010] RIP: 0033:0x7ff62fcf1cf7 [ 4.889202] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f71 [ 4.890172] RSP: 002b:00007ffe6644ade8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.890570] RAX: ffffffffffffffda RBX: 0000000000f2ca70 RCX: 00007ff62fcf1cf7 [ 4.890944] RDX: 0000000000000000 RSI: 0000000000f2b9e0 RDI: 0000000000000003 [ 4.891318] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 4.891691] R10: 00007ff62fd55300 R11: 0000000000000246 R12: 0000000000f2b9e0 [ 4.892064] R13: 0000000000000000 R14: 0000000000f2bdd0 R15: 0000000000000001 [ 4.892439] ==================================================================
Signed-off-by: Tong Zhang ztong0001@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/eni.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c index 38fec976e62d..1409d48affb7 100644 --- a/drivers/atm/eni.c +++ b/drivers/atm/eni.c @@ -2279,7 +2279,8 @@ static int eni_init_one(struct pci_dev *pci_dev, return rc;
err_eni_release: - eni_do_release(dev); + dev->phy = NULL; + iounmap(ENI_DEV(dev)->ioaddr); err_unregister: atm_dev_deregister(dev); err_free_consistent:
From: Tong Zhang ztong0001@gmail.com
[ Upstream commit a2bd45834e83d6c5a04d397bde13d744a4812dfc ]
lanai_dev_open() can fail. When it fail, lanai->base is unmapped and the pci device is disabled. The caller, lanai_init_one(), then tries to run atm_dev_deregister(). This will subsequently call lanai_dev_close() and use the already released MMIO area.
To fix this issue, set the lanai->base to NULL if open fail, and test the flag in lanai_dev_close().
[ 8.324153] lanai: lanai_start() failed, err=19 [ 8.324819] lanai(itf 0): shutting down interface [ 8.325211] BUG: unable to handle page fault for address: ffffc90000180024 [ 8.325781] #PF: supervisor write access in kernel mode [ 8.326215] #PF: error_code(0x0002) - not-present page [ 8.326641] PGD 100000067 P4D 100000067 PUD 100139067 PMD 10013a067 PTE 0 [ 8.327206] Oops: 0002 [#1] SMP KASAN NOPTI [ 8.327557] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #12 [ 8.328229] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4 [ 8.329145] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai] [ 8.329587] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80 [ 8.330917] RSP: 0018:ffff8881029ef680 EFLAGS: 00010246 [ 8.331196] RAX: 000000000003fffe RBX: ffff888102fb4800 RCX: ffffffffc001a98a [ 8.331572] RDX: ffffc90000180000 RSI: 0000000000000246 RDI: ffff888102fb4000 [ 8.331948] RBP: ffff888102fb4000 R08: ffffffff8115da8a R09: ffffed102053deaa [ 8.332326] R10: 0000000000000003 R11: ffffed102053dea9 R12: ffff888102fb48a4 [ 8.332701] R13: ffffffffc00123c0 R14: ffff888102fb4b90 R15: ffff888102fb4b88 [ 8.333077] FS: 00007f08eb9056a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000 [ 8.333502] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.333806] CR2: ffffc90000180024 CR3: 0000000102a28000 CR4: 00000000000006f0 [ 8.334182] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.334557] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.334932] Call Trace: [ 8.335066] atm_dev_deregister+0x161/0x1a0 [atm] [ 8.335324] lanai_init_one.cold+0x20c/0x96d [lanai] [ 8.335594] ? lanai_send+0x2a0/0x2a0 [lanai] [ 8.335831] local_pci_probe+0x6f/0xb0 [ 8.336039] pci_device_probe+0x171/0x240 [ 8.336255] ? pci_device_remove+0xe0/0xe0 [ 8.336475] ? kernfs_create_link+0xb6/0x110 [ 8.336704] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 8.336983] really_probe+0x161/0x420 [ 8.337181] driver_probe_device+0x6d/0xd0 [ 8.337401] device_driver_attach+0x82/0x90 [ 8.337626] ? device_driver_attach+0x90/0x90 [ 8.337859] __driver_attach+0x60/0x100 [ 8.338065] ? device_driver_attach+0x90/0x90 [ 8.338298] bus_for_each_dev+0xe1/0x140 [ 8.338511] ? subsys_dev_iter_exit+0x10/0x10 [ 8.338745] ? klist_node_init+0x61/0x80 [ 8.338956] bus_add_driver+0x254/0x2a0 [ 8.339164] driver_register+0xd3/0x150 [ 8.339370] ? 0xffffffffc0028000 [ 8.339550] do_one_initcall+0x84/0x250 [ 8.339755] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 8.340076] ? free_vmap_area_noflush+0x1a5/0x5c0 [ 8.340329] ? unpoison_range+0xf/0x30 [ 8.340532] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 8.340806] ? unpoison_range+0xf/0x30 [ 8.341014] ? unpoison_range+0xf/0x30 [ 8.341217] do_init_module+0xf8/0x350 [ 8.341419] load_module+0x3fe6/0x4340 [ 8.341621] ? vm_unmap_ram+0x1d0/0x1d0 [ 8.341826] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 8.342101] ? module_frob_arch_sections+0x20/0x20 [ 8.342358] ? __do_sys_finit_module+0x108/0x170 [ 8.342604] __do_sys_finit_module+0x108/0x170 [ 8.342841] ? __ia32_sys_init_module+0x40/0x40 [ 8.343083] ? file_open_root+0x200/0x200 [ 8.343298] ? do_sys_open+0x85/0xe0 [ 8.343491] ? filp_open+0x50/0x50 [ 8.343675] ? exit_to_user_mode_prepare+0xfc/0x130 [ 8.343935] do_syscall_64+0x33/0x40 [ 8.344132] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 8.344401] RIP: 0033:0x7f08eb887cf7 [ 8.344594] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41 [ 8.345565] RSP: 002b:00007ffcd5c98ad8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 8.345962] RAX: ffffffffffffffda RBX: 00000000008fea70 RCX: 00007f08eb887cf7 [ 8.346336] RDX: 0000000000000000 RSI: 00000000008fd9e0 RDI: 0000000000000003 [ 8.346711] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 8.347085] R10: 00007f08eb8eb300 R11: 0000000000000246 R12: 00000000008fd9e0 [ 8.347460] R13: 0000000000000000 R14: 00000000008fddd0 R15: 0000000000000001 [ 8.347836] Modules linked in: lanai(+) atm [ 8.348065] CR2: ffffc90000180024 [ 8.348244] ---[ end trace 7fdc1c668f2003e5 ]--- [ 8.348490] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai] [ 8.348772] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80 [ 8.349745] RSP: 0018:ffff8881029ef680 EFLAGS: 00010246 [ 8.350022] RAX: 000000000003fffe RBX: ffff888102fb4800 RCX: ffffffffc001a98a [ 8.350397] RDX: ffffc90000180000 RSI: 0000000000000246 RDI: ffff888102fb4000 [ 8.350772] RBP: ffff888102fb4000 R08: ffffffff8115da8a R09: ffffed102053deaa [ 8.351151] R10: 0000000000000003 R11: ffffed102053dea9 R12: ffff888102fb48a4 [ 8.351525] R13: ffffffffc00123c0 R14: ffff888102fb4b90 R15: ffff888102fb4b88 [ 8.351918] FS: 00007f08eb9056a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000 [ 8.352343] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.352647] CR2: ffffc90000180024 CR3: 0000000102a28000 CR4: 00000000000006f0 [ 8.353022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.353397] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.353958] modprobe (95) used greatest stack depth: 26216 bytes left
Signed-off-by: Tong Zhang ztong0001@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/lanai.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c index 5f8e009b2da1..34e6e4b90f74 100644 --- a/drivers/atm/lanai.c +++ b/drivers/atm/lanai.c @@ -2238,6 +2238,7 @@ static int lanai_dev_open(struct atm_dev *atmdev) conf1_write(lanai); #endif iounmap(lanai->base); + lanai->base = NULL; error_pci: pci_disable_device(lanai->pci); error: @@ -2250,6 +2251,8 @@ static int lanai_dev_open(struct atm_dev *atmdev) static void lanai_dev_close(struct atm_dev *atmdev) { struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data; + if (lanai->base==NULL) + return; printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n", lanai->number); lanai_timed_poll_stop(lanai); @@ -2559,7 +2562,7 @@ static int lanai_init_one(struct pci_dev *pci, struct atm_dev *atmdev; int result;
- lanai = kmalloc(sizeof(*lanai), GFP_KERNEL); + lanai = kzalloc(sizeof(*lanai), GFP_KERNEL); if (lanai == NULL) { printk(KERN_ERR DEV_LABEL ": couldn't allocate dev_data structure!\n");
From: Hayes Wang hayeswang@realtek.com
[ Upstream commit 4b5dc1a94d4f92b5845e98bd9ae344b26d933aad ]
This reverts commit 134f98bcf1b898fb9d6f2b91bc85dd2e5478b4b8.
The r8153_mac_clk_spd() is used for RTL8153A only, because the register table of RTL8153B is different from RTL8153A. However, this function would be called when RTL8153B calls r8153_first_init() and r8153_enter_oob(). That causes RTL8153B becomes unstable when suspending and resuming. The worst case may let the device stop working.
Besides, revert this commit to disable MAC clock speed down for RTL8153A. It would avoid the known issue when enabling U1. The data of the first control transfer may be wrong when exiting U1.
Signed-off-by: Hayes Wang hayeswang@realtek.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/r8152.c | 35 ++++++----------------------------- 1 file changed, 6 insertions(+), 29 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 7dc605585535..a27ea04cfa6c 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2593,29 +2593,6 @@ static void __rtl_set_wol(struct r8152 *tp, u32 wolopts) device_set_wakeup_enable(&tp->udev->dev, false); }
-static void r8153_mac_clk_spd(struct r8152 *tp, bool enable) -{ - /* MAC clock speed down */ - if (enable) { - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, - ALDPS_SPDWN_RATIO); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, - EEE_SPDWN_RATIO); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, - PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN | - U1U2_SPDWN_EN | L1_SPDWN_EN); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, - PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN | - TP100_SPDWN_EN | TP500_SPDWN_EN | EEE_SPDWN_EN | - TP1000_SPDWN_EN); - } else { - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0); - } -} - static void r8153_u1u2en(struct r8152 *tp, bool enable) { u8 u1u2[8]; @@ -2847,11 +2824,9 @@ static void rtl8153_runtime_enable(struct r8152 *tp, bool enable) if (enable) { r8153_u1u2en(tp, false); r8153_u2p3en(tp, false); - r8153_mac_clk_spd(tp, true); rtl_runtime_suspend_enable(tp, true); } else { rtl_runtime_suspend_enable(tp, false); - r8153_mac_clk_spd(tp, false);
switch (tp->version) { case RTL_VER_03: @@ -3413,7 +3388,6 @@ static void r8153_first_init(struct r8152 *tp) u32 ocp_data; int i;
- r8153_mac_clk_spd(tp, false); rxdy_gated_en(tp, true); r8153_teredo_off(tp);
@@ -3475,8 +3449,6 @@ static void r8153_enter_oob(struct r8152 *tp) u32 ocp_data; int i;
- r8153_mac_clk_spd(tp, true); - ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ocp_data &= ~NOW_IS_OOB; ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); @@ -4141,9 +4113,14 @@ static void r8153_init(struct r8152 *tp)
ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);
+ /* MAC clock speed down */ + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0); + r8153_power_cut_en(tp, false); r8153_u1u2en(tp, true); - r8153_mac_clk_spd(tp, false); usb_enable_lpm(tp->udev);
/* rx aggregation */
From: Dinghao Liu dinghao.liu@zju.edu.cn
[ Upstream commit 7a766381634da19fc837619b0a34590498d9d29a ]
When ixgbe_fdir_write_perfect_filter_82599() fails, input allocated by kzalloc() has not been freed, which leads to memleak.
Signed-off-by: Dinghao Liu dinghao.liu@zju.edu.cn Reviewed-by: Paul Menzel pmenzel@molgen.mpg.de Tested-by: Tony Brelinski tonyx.brelinski@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index faee77fa0804..8fcd3ffb43e0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -9487,8 +9487,10 @@ static int ixgbe_configure_clsu32(struct ixgbe_adapter *adapter, ixgbe_atr_compute_perfect_hash_82599(&input->filter, mask); err = ixgbe_fdir_write_perfect_filter_82599(hw, &input->filter, input->sw_idx, queue); - if (!err) - ixgbe_update_ethtool_fdir_entry(adapter, input, input->sw_idx); + if (err) + goto err_out_w_lock; + + ixgbe_update_ethtool_fdir_entry(adapter, input, input->sw_idx); spin_unlock(&adapter->fdir_perfect_lock);
if ((uhtid != 0x800) && (adapter->jump_tables[uhtid]))
From: Jia-Ju Bai baijiaju1990@gmail.com
[ Upstream commit 38c26ff3048af50eee3fcd591921357ee5bfd9ee ]
When bdx_read_mac() fails, no error return code of bdx_probe() is assigned. To fix this bug, err is assigned with -EFAULT as error return code.
Reported-by: TOTE Robot oslab@tsinghua.edu.cn Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/tehuti/tehuti.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c index dc966ddb6d81..358f911fcd9d 100644 --- a/drivers/net/ethernet/tehuti/tehuti.c +++ b/drivers/net/ethernet/tehuti/tehuti.c @@ -2056,6 +2056,7 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /*bdx_hw_reset(priv); */ if (bdx_read_mac(priv)) { pr_err("load MAC address failed\n"); + err = -EFAULT; goto err_out_iomap; } SET_NETDEV_DEV(ndev, &pdev->dev);
From: Denis Efremov efremov@linux.com
[ Upstream commit 155b23e6e53475ca3b8c2a946299b4d4dd6a5a1e ]
RXMAC_BC_FRM_CNT_COUNT added to mp->rx_bcasts twice in a row in niu_xmac_interrupt(). Remove the second addition.
Signed-off-by: Denis Efremov efremov@linux.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sun/niu.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c index d84501441edd..602a2025717a 100644 --- a/drivers/net/ethernet/sun/niu.c +++ b/drivers/net/ethernet/sun/niu.c @@ -3933,8 +3933,6 @@ static void niu_xmac_interrupt(struct niu *np) mp->rx_mcasts += RXMAC_MC_FRM_CNT_COUNT; if (val & XRXMAC_STATUS_RXBCAST_CNT_EXP) mp->rx_bcasts += RXMAC_BC_FRM_CNT_COUNT; - if (val & XRXMAC_STATUS_RXBCAST_CNT_EXP) - mp->rx_bcasts += RXMAC_BC_FRM_CNT_COUNT; if (val & XRXMAC_STATUS_RXHIST1_CNT_EXP) mp->rx_hist_cnt1 += RXMAC_HIST_CNT1_COUNT; if (val & XRXMAC_STATUS_RXHIST2_CNT_EXP)
From: Michael Braun michael-dev@fami-braun.de
[ Upstream commit d8861bab48b6c1fc3cdbcab8ff9d1eaea43afe7f ]
When using jumbo packets and overrunning rx queue with napi enabled, the following sequence is observed in gfar_add_rx_frag:
| lstatus | | skb | t | lstatus, size, flags | first | len, data_len, *ptr | ---+--------------------------------------+-------+-----------------------+ 13 | 18002348, 9032, INTERRUPT LAST | 0 | 9600, 8000, f554c12e | 12 | 10000640, 1600, INTERRUPT | 0 | 8000, 6400, f554c12e | 11 | 10000640, 1600, INTERRUPT | 0 | 6400, 4800, f554c12e | 10 | 10000640, 1600, INTERRUPT | 0 | 4800, 3200, f554c12e | 09 | 10000640, 1600, INTERRUPT | 0 | 3200, 1600, f554c12e | 08 | 14000640, 1600, INTERRUPT FIRST | 0 | 1600, 0, f554c12e | 07 | 14000640, 1600, INTERRUPT FIRST | 1 | 0, 0, f554c12e | 06 | 1c000080, 128, INTERRUPT LAST FIRST | 1 | 0, 0, abf3bd6e | 05 | 18002348, 9032, INTERRUPT LAST | 0 | 8000, 6400, c5a57780 | 04 | 10000640, 1600, INTERRUPT | 0 | 6400, 4800, c5a57780 | 03 | 10000640, 1600, INTERRUPT | 0 | 4800, 3200, c5a57780 | 02 | 10000640, 1600, INTERRUPT | 0 | 3200, 1600, c5a57780 | 01 | 10000640, 1600, INTERRUPT | 0 | 1600, 0, c5a57780 | 00 | 14000640, 1600, INTERRUPT FIRST | 1 | 0, 0, c5a57780 |
So at t=7 a new packets is started but not finished, probably due to rx overrun - but rx overrun is not indicated in the flags. Instead a new packets starts at t=8. This results in skb->len to exceed size for the LAST fragment at t=13 and thus a negative fragment size added to the skb.
This then crashes:
kernel BUG at include/linux/skbuff.h:2277! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c04689f4] skb_pull+0x2c/0x48 LR [c03f62ac] gfar_clean_rx_ring+0x2e4/0x844 Call Trace: [ec4bfd38] [c06a84c4] _raw_spin_unlock_irqrestore+0x60/0x7c (unreliable) [ec4bfda8] [c03f6a44] gfar_poll_rx_sq+0x48/0xe4 [ec4bfdc8] [c048d504] __napi_poll+0x54/0x26c [ec4bfdf8] [c048d908] net_rx_action+0x138/0x2c0 [ec4bfe68] [c06a8f34] __do_softirq+0x3a4/0x4fc [ec4bfed8] [c0040150] run_ksoftirqd+0x58/0x70 [ec4bfee8] [c0066ecc] smpboot_thread_fn+0x184/0x1cc [ec4bff08] [c0062718] kthread+0x140/0x144 [ec4bff38] [c0012350] ret_from_kernel_thread+0x14/0x1c
This patch fixes this by checking for computed LAST fragment size, so a negative sized fragment is never added. In order to prevent the newer rx frame from getting corrupted, the FIRST flag is checked to discard the incomplete older frame.
Signed-off-by: Michael Braun michael-dev@fami-braun.de Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/gianfar.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 8db0924ec681..df03cf63cb02 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -2940,6 +2940,10 @@ static bool gfar_add_rx_frag(struct gfar_rx_buff *rxb, u32 lstatus, if (lstatus & BD_LFLAG(RXBD_LAST)) size -= skb->len;
+ WARN(size < 0, "gianfar: rx fragment size underflow"); + if (size < 0) + return false; + skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, rxb->page_offset + RXBUF_ALIGNMENT, size, GFAR_RXB_TRUESIZE); @@ -3101,6 +3105,17 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) if (lstatus & BD_LFLAG(RXBD_EMPTY)) break;
+ /* lost RXBD_LAST descriptor due to overrun */ + if (skb && + (lstatus & BD_LFLAG(RXBD_FIRST))) { + /* discard faulty buffer */ + dev_kfree_skb(skb); + skb = NULL; + rx_queue->stats.rx_dropped++; + + /* can continue normally */ + } + /* order rx buffer descriptor reads */ rmb();
From: Yang Li yang.lee@linux.alibaba.com
[ Upstream commit 6e5d5791730b55a1f987e1db84b078b91eb49e99 ]
fixed the following coccicheck: ./drivers/gpio/gpiolib-acpi.c:176:7-27: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT
Make sure threaded IRQs without a primary handler are always request with IRQF_ONESHOT
Reported-by: Abaci Robot abaci@linux.alibaba.com Signed-off-by: Yang Li yang.lee@linux.alibaba.com Acked-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpiolib-acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index 18f5973b9697..4ad34c6803ad 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -177,7 +177,7 @@ static void acpi_gpiochip_request_irq(struct acpi_gpio_chip *acpi_gpio, int ret, value;
ret = request_threaded_irq(event->irq, NULL, event->handler, - event->irqflags, "ACPI:Event", event); + event->irqflags | IRQF_ONESHOT, "ACPI:Event", event); if (ret) { dev_err(acpi_gpio->chip->parent, "Failed to setup interrupt handler for %d\n",
From: Timo Rothenpieler timo@rothenpieler.org
[ Upstream commit a0590473c5e6c4ef17c3132ad08fbad170f72d55 ]
This follows what was done in 8c2fabc6542d9d0f8b16bd1045c2eda59bdcde13. With the default being m, it's impossible to build the module into the kernel.
Signed-off-by: Timo Rothenpieler timo@rothenpieler.org Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig index ac3e06367cb6..e55f86713948 100644 --- a/fs/nfs/Kconfig +++ b/fs/nfs/Kconfig @@ -127,7 +127,7 @@ config PNFS_BLOCK config PNFS_FLEXFILE_LAYOUT tristate depends on NFS_V4_1 && NFS_V3 - default m + default NFS_V4
config NFS_V4_1_IMPLEMENTATION_ID_DOMAIN string "NFSv4.1 Implementation ID Domain"
From: Frank Sorenson sorenson@redhat.com
[ Upstream commit ad3dbe35c833c2d4d0bbf3f04c785d32f931e7c9 ]
CREATE requests return a post_op_fh3, rather than nfs_fh3. The post_op_fh3 includes an extra word to indicate 'handle_follows'.
Without that additional word, create fails when full 64-byte filehandles are in use.
Add NFS3_post_op_fh_sz, and correct the size calculation for NFS3_createres_sz.
Signed-off-by: Frank Sorenson sorenson@redhat.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/nfs3xdr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c index 9956453aa6ff..0ed419bb02b0 100644 --- a/fs/nfs/nfs3xdr.c +++ b/fs/nfs/nfs3xdr.c @@ -34,6 +34,7 @@ */ #define NFS3_fhandle_sz (1+16) #define NFS3_fh_sz (NFS3_fhandle_sz) /* shorthand */ +#define NFS3_post_op_fh_sz (1+NFS3_fh_sz) #define NFS3_sattr_sz (15) #define NFS3_filename_sz (1+(NFS3_MAXNAMLEN>>2)) #define NFS3_path_sz (1+(NFS3_MAXPATHLEN>>2)) @@ -71,7 +72,7 @@ #define NFS3_readlinkres_sz (1+NFS3_post_op_attr_sz+1) #define NFS3_readres_sz (1+NFS3_post_op_attr_sz+3) #define NFS3_writeres_sz (1+NFS3_wcc_data_sz+4) -#define NFS3_createres_sz (1+NFS3_fh_sz+NFS3_post_op_attr_sz+NFS3_wcc_data_sz) +#define NFS3_createres_sz (1+NFS3_post_op_fh_sz+NFS3_post_op_attr_sz+NFS3_wcc_data_sz) #define NFS3_renameres_sz (1+(2 * NFS3_wcc_data_sz)) #define NFS3_linkres_sz (1+NFS3_post_op_attr_sz+NFS3_wcc_data_sz) #define NFS3_readdirres_sz (1+NFS3_post_op_attr_sz+2)
From: Jia-Ju Bai baijiaju1990@gmail.com
[ Upstream commit 143c253f42bad20357e7e4432087aca747c43384 ]
When hns_assemble_skb() returns NULL to skb, no error return code of hns_nic_clear_all_rx_fetch() is assigned. To fix this bug, ret is assigned with -ENOMEM in this case.
Reported-by: TOTE Robot oslab@tsinghua.edu.cn Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c index 4de65a9de0a6..b7fe3e849872 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -1677,8 +1677,10 @@ static int hns_nic_clear_all_rx_fetch(struct net_device *ndev) for (j = 0; j < fetch_num; j++) { /* alloc one skb and init */ skb = hns_assemble_skb(ndev); - if (!skb) + if (!skb) { + ret = -ENOMEM; goto out; + } rd = &tx_ring_data(priv, skb->queue_mapping); hns_nic_net_xmit_hw(ndev, skb, rd);
From: Jia-Ju Bai baijiaju1990@gmail.com
[ Upstream commit 62765d39553cfd1ad340124fe1e280450e8c89e2 ]
When priv->rx_skbuff or priv->tx_skbuff is NULL, no error return code of uhdlc_init() is assigned. To fix this bug, ret is assigned with -ENOMEM in these cases.
Reported-by: TOTE Robot oslab@tsinghua.edu.cn Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wan/fsl_ucc_hdlc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c index 9ab04ef532f3..5df6e85e7ccb 100644 --- a/drivers/net/wan/fsl_ucc_hdlc.c +++ b/drivers/net/wan/fsl_ucc_hdlc.c @@ -201,14 +201,18 @@ static int uhdlc_init(struct ucc_hdlc_private *priv) priv->rx_skbuff = kcalloc(priv->rx_ring_size, sizeof(*priv->rx_skbuff), GFP_KERNEL); - if (!priv->rx_skbuff) + if (!priv->rx_skbuff) { + ret = -ENOMEM; goto free_ucc_pram; + }
priv->tx_skbuff = kcalloc(priv->tx_ring_size, sizeof(*priv->tx_skbuff), GFP_KERNEL); - if (!priv->tx_skbuff) + if (!priv->tx_skbuff) { + ret = -ENOMEM; goto free_rx_skbuff; + }
priv->skb_curtx = 0; priv->skb_dirtytx = 0;
From: Tong Zhang ztong0001@gmail.com
[ Upstream commit 3153724fc084d8ef640c611f269ddfb576d1dcb1 ]
dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock (i.e dev->phy_data->lock) will result in a null-ptr-dereference.
I believe this is a typo and what it actually want to do is to allocate phy_data instead of dev_data.
Signed-off-by: Tong Zhang ztong0001@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/uPD98402.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/atm/uPD98402.c b/drivers/atm/uPD98402.c index 4fa13a807873..cf517fd148ea 100644 --- a/drivers/atm/uPD98402.c +++ b/drivers/atm/uPD98402.c @@ -210,7 +210,7 @@ static void uPD98402_int(struct atm_dev *dev) static int uPD98402_start(struct atm_dev *dev) { DPRINTK("phy_start\n"); - if (!(dev->dev_data = kmalloc(sizeof(struct uPD98402_priv),GFP_KERNEL))) + if (!(dev->phy_data = kmalloc(sizeof(struct uPD98402_priv),GFP_KERNEL))) return -ENOMEM; spin_lock_init(&PRIV(dev)->lock); memset(&PRIV(dev)->sonet_stats,0,sizeof(struct k_sonet_stats));
From: Tong Zhang ztong0001@gmail.com
[ Upstream commit 4416e98594dc04590ebc498fc4e530009535c511 ]
this one is similar to the phy_data allocation fix in uPD98402, the driver allocate the idt77105_priv and store to dev_data but later dereference using dev->dev_data, which will cause null-ptr-dereference.
fix this issue by changing dev_data to phy_data so that PRIV(dev) can work correctly.
Signed-off-by: Tong Zhang ztong0001@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/idt77105.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/atm/idt77105.c b/drivers/atm/idt77105.c index 0a67487c0b1d..a2ecb4190f78 100644 --- a/drivers/atm/idt77105.c +++ b/drivers/atm/idt77105.c @@ -261,7 +261,7 @@ static int idt77105_start(struct atm_dev *dev) { unsigned long flags;
- if (!(dev->dev_data = kmalloc(sizeof(struct idt77105_priv),GFP_KERNEL))) + if (!(dev->phy_data = kmalloc(sizeof(struct idt77105_priv),GFP_KERNEL))) return -ENOMEM; PRIV(dev)->dev = dev; spin_lock_irqsave(&idt77105_priv_lock, flags); @@ -336,7 +336,7 @@ static int idt77105_stop(struct atm_dev *dev) else idt77105_all = walk->next; dev->phy = NULL; - dev->dev_data = NULL; + dev->phy_data = NULL; kfree(walk); break; }
From: Rob Gardner rob.gardner@oracle.com
[ Upstream commit e5e8b80d352ec999d2bba3ea584f541c83f4ca3f ]
is_no_fault_exception() has two bugs which were discovered via random opcode testing with stress-ng. Both are caused by improper filtering of opcodes.
The first bug can be triggered by a floating point store with a no-fault ASI, for instance "sta %f0, [%g0] #ASI_PNF", opcode C1A01040.
The code first tests op3[5] (0x1000000), which denotes a floating point instruction, and then tests op3[2] (0x200000), which denotes a store instruction. But these bits are not mutually exclusive, and the above mentioned opcode has both bits set. The intent is to filter out stores, so the test for stores must be done first in order to have any effect.
The second bug can be triggered by a floating point load with one of the invalid ASI values 0x8e or 0x8f, which pass this check in is_no_fault_exception(): if ((asi & 0xf2) == ASI_PNF)
An example instruction is "ldqa [%l7 + %o7] #ASI 0x8f, %f38", opcode CF95D1EF. Asi values greater than 0x8b (ASI_SNFL) are fatal in handle_ldf_stq(), and is_no_fault_exception() must not allow these invalid asi values to make it that far.
In both of these cases, handle_ldf_stq() reacts by calling sun4v_data_access_exception() or spitfire_data_access_exception(), which call is_no_fault_exception() and results in an infinite recursion.
Signed-off-by: Rob Gardner rob.gardner@oracle.com Tested-by: Anatoly Pugachev matorola@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- arch/sparc/kernel/traps_64.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c index aa624ed79db1..86879c28910b 100644 --- a/arch/sparc/kernel/traps_64.c +++ b/arch/sparc/kernel/traps_64.c @@ -274,14 +274,13 @@ bool is_no_fault_exception(struct pt_regs *regs) asi = (regs->tstate >> 24); /* saved %asi */ else asi = (insn >> 5); /* immediate asi */ - if ((asi & 0xf2) == ASI_PNF) { - if (insn & 0x1000000) { /* op3[5:4]=3 */ - handle_ldf_stq(insn, regs); - return true; - } else if (insn & 0x200000) { /* op3[2], stores */ + if ((asi & 0xf6) == ASI_PNF) { + if (insn & 0x200000) /* op3[2], stores */ return false; - } - handle_ld_nf(insn, regs); + if (insn & 0x1000000) /* op3[5:4]=3 (fp) */ + handle_ldf_stq(insn, regs); + else + handle_ld_nf(insn, regs); return true; } }
From: Peter Zijlstra peterz@infradead.org
[ Upstream commit d5b0e0677bfd5efd17c5bbb00156931f0d41cb85 ]
Jakub reported that:
static struct net_device *rtl8139_init_board(struct pci_dev *pdev) { ... u64_stats_init(&tp->rx_stats.syncp); u64_stats_init(&tp->tx_stats.syncp); ... }
results in lockdep getting confused between the RX and TX stats lock. This is because u64_stats_init() is an inline calling seqcount_init(), which is a macro using a static variable to generate a lockdep class.
By wrapping that in an inline, we negate the effect of the macro and fold the static key variable, hence the confusion.
Fix by also making u64_stats_init() a macro for the case where it matters, leaving the other case an inline for argument validation etc.
Reported-by: Jakub Kicinski kuba@kernel.org Debugged-by: "Ahmed S. Darwish" a.darwish@linutronix.de Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Tested-by: "Erhard F." erhard_f@mailbox.org Link: https://lkml.kernel.org/r/YEXicy6+9MksdLZh@hirez.programming.kicks-ass.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/u64_stats_sync.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/include/linux/u64_stats_sync.h b/include/linux/u64_stats_sync.h index a27604f99ed0..11096b561dab 100644 --- a/include/linux/u64_stats_sync.h +++ b/include/linux/u64_stats_sync.h @@ -69,12 +69,13 @@ struct u64_stats_sync { };
+#if BITS_PER_LONG == 32 && defined(CONFIG_SMP) +#define u64_stats_init(syncp) seqcount_init(&(syncp)->seq) +#else static inline void u64_stats_init(struct u64_stats_sync *syncp) { -#if BITS_PER_LONG == 32 && defined(CONFIG_SMP) - seqcount_init(&syncp->seq); -#endif } +#endif
static inline void u64_stats_update_begin(struct u64_stats_sync *syncp) {
From: Christian König christian.koenig@amd.com
[ Upstream commit cba2afb65cb05c3d197d17323fee4e3c9edef9cd ]
When AGP is compiled as module radeon must be compiled as module as well.
Signed-off-by: Christian König christian.koenig@amd.com Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index e44e567bd789..a050a9aa9a5e 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -192,6 +192,7 @@ source "drivers/gpu/drm/arm/Kconfig" config DRM_RADEON tristate "ATI Radeon" depends on DRM && PCI && MMU + depends on AGP || !AGP select FW_LOADER select DRM_KMS_HELPER select DRM_TTM
From: "J. Bruce Fields" bfields@redhat.com
[ Upstream commit 4f8be1f53bf615102d103c0509ffa9596f65b718 ]
The NFSv4 protocol doesn't have any notion of reomoving an attribute, so removexattr(path,"system.nfs4_acl") doesn't make sense.
There's no documented return value. Arguably it could be EOPNOTSUPP but I'm a little worried an application might take that to mean that we don't support ACLs or xattrs. How about EINVAL?
Signed-off-by: J. Bruce Fields bfields@redhat.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/nfs4proc.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index d89a815f7c31..f0dc5e0e5d5a 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -5535,6 +5535,9 @@ static int __nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t bufl unsigned int npages = DIV_ROUND_UP(buflen, PAGE_SIZE); int ret, i;
+ /* You can't remove system.nfs4_acl: */ + if (buflen == 0) + return -EINVAL; if (!nfs4_server_supports_acls(server)) return -EOPNOTSUPP; if (npages > ARRAY_SIZE(pages))
From: Daniel Wagner dwagner@suse.de
[ Upstream commit 9ec491447b90ad6a4056a9656b13f0b3a1e83043 ]
register_disk() suppress uevents for devices with the GENHD_FL_HIDDEN but enables uevents at the end again in order to announce disk after possible partitions are created.
When the device is removed the uevents are still on and user land sees 'remove' messages for devices which were never 'add'ed to the system.
KERNEL[95481.571887] remove /devices/virtual/nvme-fabrics/ctl/nvme5/nvme0c5n1 (block)
Let's suppress the uevents for GENHD_FL_HIDDEN by not enabling the uevents at all.
Signed-off-by: Daniel Wagner dwagner@suse.de Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Martin Wilck mwilck@suse.com Link: https://lore.kernel.org/r/20210311151917.136091-1-dwagner@suse.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/genhd.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/block/genhd.c b/block/genhd.c index aee2fa9de1a7..27a410d31087 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -623,10 +623,8 @@ static void register_disk(struct device *parent, struct gendisk *disk, disk->part0.holder_dir = kobject_create_and_add("holders", &ddev->kobj); disk->slave_dir = kobject_create_and_add("slaves", &ddev->kobj);
- if (disk->flags & GENHD_FL_HIDDEN) { - dev_set_uevent_suppress(ddev, 0); + if (disk->flags & GENHD_FL_HIDDEN) return; - }
/* No minors to use for partitions */ if (!disk_part_scan_enabled(disk))
From: Sergei Trofimovich slyfox@gentoo.org
[ Upstream commit 0ceb1ace4a2778e34a5414e5349712ae4dc41d85 ]
In https://bugs.gentoo.org/769614 Dmitry noticed that `ptrace(PTRACE_GET_SYSCALL_INFO)` does not work for syscalls called via glibc's syscall() wrapper.
ia64 has two ways to call syscalls from userspace: via `break` and via `eps` instructions.
The difference is in stack layout:
1. `eps` creates simple stack frame: no locals, in{0..7} == out{0..8} 2. `break` uses userspace stack frame: may be locals (glibc provides one), in{0..7} == out{0..8}.
Both work fine in syscall handling cde itself.
But `ptrace(PTRACE_GET_SYSCALL_INFO)` uses unwind mechanism to re-extract syscall arguments but it does not account for locals.
The change always skips locals registers. It should not change `eps` path as kernel's handler already enforces locals=0 and fixes `break`.
Tested on v5.10 on rx3600 machine (ia64 9040 CPU).
Link: https://lkml.kernel.org/r/20210221002554.333076-1-slyfox@gentoo.org Link: https://bugs.gentoo.org/769614 Signed-off-by: Sergei Trofimovich slyfox@gentoo.org Reported-by: Dmitry V. Levin ldv@altlinux.org Cc: Oleg Nesterov oleg@redhat.com Cc: John Paul Adrian Glaubitz glaubitz@physik.fu-berlin.de Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/ia64/kernel/ptrace.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 427cd565fd61..799400287cda 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -2147,27 +2147,39 @@ static void syscall_get_set_args_cb(struct unw_frame_info *info, void *data) { struct syscall_get_set_args *args = data; struct pt_regs *pt = args->regs; - unsigned long *krbs, cfm, ndirty; + unsigned long *krbs, cfm, ndirty, nlocals, nouts; int i, count;
if (unw_unwind_to_user(info) < 0) return;
+ /* + * We get here via a few paths: + * - break instruction: cfm is shared with caller. + * syscall args are in out= regs, locals are non-empty. + * - epsinstruction: cfm is set by br.call + * locals don't exist. + * + * For both cases argguments are reachable in cfm.sof - cfm.sol. + * CFM: [ ... | sor: 17..14 | sol : 13..7 | sof : 6..0 ] + */ cfm = pt->cr_ifs; + nlocals = (cfm >> 7) & 0x7f; /* aka sol */ + nouts = (cfm & 0x7f) - nlocals; /* aka sof - sol */ krbs = (unsigned long *)info->task + IA64_RBS_OFFSET/8; ndirty = ia64_rse_num_regs(krbs, krbs + (pt->loadrs >> 19));
count = 0; if (in_syscall(pt)) - count = min_t(int, args->n, cfm & 0x7f); + count = min_t(int, args->n, nouts);
+ /* Iterate over outs. */ for (i = 0; i < count; i++) { + int j = ndirty + nlocals + i + args->i; if (args->rw) - *ia64_rse_skip_regs(krbs, ndirty + i + args->i) = - args->args[i]; + *ia64_rse_skip_regs(krbs, j) = args->args[i]; else - args->args[i] = *ia64_rse_skip_regs(krbs, - ndirty + i + args->i); + args->args[i] = *ia64_rse_skip_regs(krbs, j); }
if (!args->rw) {
From: Sergei Trofimovich slyfox@gentoo.org
[ Upstream commit 61bf318eac2c13356f7bd1c6a05421ef504ccc8a ]
In https://bugs.gentoo.org/769614 Dmitry noticed that `ptrace(PTRACE_GET_SYSCALL_INFO)` does not return error sign properly.
The bug is in mismatch between get/set errors:
static inline long syscall_get_error(struct task_struct *task, struct pt_regs *regs) { return regs->r10 == -1 ? regs->r8:0; }
static inline long syscall_get_return_value(struct task_struct *task, struct pt_regs *regs) { return regs->r8; }
static inline void syscall_set_return_value(struct task_struct *task, struct pt_regs *regs, int error, long val) { if (error) { /* error < 0, but ia64 uses > 0 return value */ regs->r8 = -error; regs->r10 = -1; } else { regs->r8 = val; regs->r10 = 0; } }
Tested on v5.10 on rx3600 machine (ia64 9040 CPU).
Link: https://lkml.kernel.org/r/20210221002554.333076-2-slyfox@gentoo.org Link: https://bugs.gentoo.org/769614 Signed-off-by: Sergei Trofimovich slyfox@gentoo.org Reported-by: Dmitry V. Levin ldv@altlinux.org Reviewed-by: Dmitry V. Levin ldv@altlinux.org Cc: John Paul Adrian Glaubitz glaubitz@physik.fu-berlin.de Cc: Oleg Nesterov oleg@redhat.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/ia64/include/asm/syscall.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/ia64/include/asm/syscall.h b/arch/ia64/include/asm/syscall.h index 1d0b875fec44..ec909eec0b4c 100644 --- a/arch/ia64/include/asm/syscall.h +++ b/arch/ia64/include/asm/syscall.h @@ -35,7 +35,7 @@ static inline void syscall_rollback(struct task_struct *task, static inline long syscall_get_error(struct task_struct *task, struct pt_regs *regs) { - return regs->r10 == -1 ? regs->r8:0; + return regs->r10 == -1 ? -regs->r8:0; }
static inline long syscall_get_return_value(struct task_struct *task,
linux-stable-mirror@lists.linaro.org
-
Sasha Levin