From: Navid Emamdoost navid.emamdoost@gmail.com

[ Upstream commit e6f390a834b56583e6fc0949822644ce92fbb107 ]

Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count. Call pm_runtime_put if pm_runtime_get_sync fails.

Signed-off-by: Navid Emamdoost navid.emamdoost@gmail.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20200605025207.65719-1-navid.emamdoost@gmail.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-arizona.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c index 5640efe5e7504..7520a13b4c7ca 100644 --- a/drivers/gpio/gpio-arizona.c +++ b/drivers/gpio/gpio-arizona.c @@ -106,6 +106,7 @@ static int arizona_gpio_direction_out(struct gpio_chip *chip, ret = pm_runtime_get_sync(chip->parent); if (ret < 0) { dev_err(chip->parent, "Failed to resume: %d\n", ret); + pm_runtime_put(chip->parent); return ret; } }

From: Jacky Hu hengqing.hu@gmail.com

[ Upstream commit 69339d083dfb7786b0e0b3fc19eaddcf11fabdfb ]

uart0_pins is defined as: static const unsigned uart0_pins[] = {135, 136, 137, 138, 139};

which npins is wronly specified as 9 later { .name = "uart0", .pins = uart0_pins, .npins = 9, },

npins should be 5 instead of 9 according to the definition.

Signed-off-by: Jacky Hu hengqing.hu@gmail.com Link: https://lore.kernel.org/r/20200616015024.287683-1-hengqing.hu@gmail.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-amd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-amd.h b/drivers/pinctrl/pinctrl-amd.h index 3e5760f1a7153..d4a192df5fabd 100644 --- a/drivers/pinctrl/pinctrl-amd.h +++ b/drivers/pinctrl/pinctrl-amd.h @@ -252,7 +252,7 @@ static const struct amd_pingroup kerncz_groups[] = { { .name = "uart0", .pins = uart0_pins, - .npins = 9, + .npins = 5, }, { .name = "uart1",

From: Markus Theil markus.theil@tu-ilmenau.de

[ Upstream commit 0b467b63870d9c05c81456aa9bfee894ab2db3b6 ]

Without this patch, eapol frames cannot be received in mesh mode, when 802.1X should be used. Initially only a MGTK is defined, which is found and set as rx->key, when there are no other keys set. ieee80211_drop_unencrypted would then drop these eapol frames, as they are data frames without encryption and there exists some rx->key.

Fix this by differentiating between mesh eapol frames and other data frames with existing rx->key. Allow mesh mesh eapol frames only if they are for our vif address.

With this patch in-place, ieee80211_rx_h_mesh_fwding continues after the ieee80211_drop_unencrypted check and notices, that these eapol frames have to be delivered locally, as they should.

Signed-off-by: Markus Theil markus.theil@tu-ilmenau.de Link: https://lore.kernel.org/r/20200625104214.50319-1-markus.theil@tu-ilmenau.de [small code cleanups] Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/rx.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 91a13aee43784..961f37c0701bc 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2357,6 +2357,7 @@ static int ieee80211_802_1x_port_control(struct ieee80211_rx_data *rx)

static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc) { + struct ieee80211_hdr *hdr = (void *)rx->skb->data; struct sk_buff *skb = rx->skb; struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);

@@ -2367,6 +2368,31 @@ static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc) if (status->flag & RX_FLAG_DECRYPTED) return 0;

+ /* check mesh EAPOL frames first */ + if (unlikely(rx->sta && ieee80211_vif_is_mesh(&rx->sdata->vif) && + ieee80211_is_data(fc))) { + struct ieee80211s_hdr *mesh_hdr; + u16 hdr_len = ieee80211_hdrlen(fc); + u16 ethertype_offset; + __be16 ethertype; + + if (!ether_addr_equal(hdr->addr1, rx->sdata->vif.addr)) + goto drop_check; + + /* make sure fixed part of mesh header is there, also checks skb len */ + if (!pskb_may_pull(rx->skb, hdr_len + 6)) + goto drop_check; + + mesh_hdr = (struct ieee80211s_hdr *)(skb->data + hdr_len); + ethertype_offset = hdr_len + ieee80211_get_mesh_hdrlen(mesh_hdr) + + sizeof(rfc1042_header); + + if (skb_copy_bits(rx->skb, ethertype_offset, &ethertype, 2) == 0 && + ethertype == rx->sdata->control_port_protocol) + return 0; + } + +drop_check: /* Drop unencrypted frames if key is set. */ if (unlikely(!ieee80211_has_protected(fc) && !ieee80211_is_any_nullfunc(fc) &&

From: Max Filippov jcmvbkbc@gmail.com

[ Upstream commit 73f9941306d5ce030f3ffc7db425c7b2a798cf8e ]

Building xtensa kernel with gcc-10 produces the following warnings: arch/xtensa/kernel/xtensa_ksyms.c:90:15: warning: conflicting types for built-in function ‘__sync_fetch_and_and_4’; expected ‘unsigned int(volatile void *, unsigned int)’ [-Wbuiltin-declaration-mismatch] arch/xtensa/kernel/xtensa_ksyms.c:96:15: warning: conflicting types for built-in function ‘__sync_fetch_and_or_4’; expected ‘unsigned int(volatile void *, unsigned int)’ [-Wbuiltin-declaration-mismatch]

Fix declarations of these functions to avoid the warning.

Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/kernel/xtensa_ksyms.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c index 4092555828b13..24cf6972eacea 100644 --- a/arch/xtensa/kernel/xtensa_ksyms.c +++ b/arch/xtensa/kernel/xtensa_ksyms.c @@ -87,13 +87,13 @@ void __xtensa_libgcc_window_spill(void) } EXPORT_SYMBOL(__xtensa_libgcc_window_spill);

-unsigned long __sync_fetch_and_and_4(unsigned long *p, unsigned long v) +unsigned int __sync_fetch_and_and_4(volatile void *p, unsigned int v) { BUG(); } EXPORT_SYMBOL(__sync_fetch_and_and_4);

-unsigned long __sync_fetch_and_or_4(unsigned long *p, unsigned long v) +unsigned int __sync_fetch_and_or_4(volatile void *p, unsigned int v) { BUG(); }

From: Damien Le Moal damien.lemoal@wdc.com

[ Upstream commit cb551b8dc079d2ef189145782627c99cb68c0255 ]

In BRM_status_show(), if the condition "!ioc->is_warpdrive" tested on entry to the function is true, a "goto out" is called. This results in unlocking ioc->pci_access_mutex without this mutex lock being taken. This generates the following splat:

[ 1148.539883] mpt3sas_cm2: BRM_status_show: BRM attribute is only for warpdrive [ 1148.547184] [ 1148.548708] ===================================== [ 1148.553501] WARNING: bad unlock balance detected! [ 1148.558277] 5.8.0-rc3+ #827 Not tainted [ 1148.562183] ------------------------------------- [ 1148.566959] cat/5008 is trying to release lock (&ioc->pci_access_mutex) at: [ 1148.574035] [<ffffffffc070b7a3>] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.580574] but there are no more locks to release! [ 1148.585524] [ 1148.585524] other info that might help us debug this: [ 1148.599624] 3 locks held by cat/5008: [ 1148.607085] #0: ffff92aea3e392c0 (&p->lock){+.+.}-{3:3}, at: seq_read+0x34/0x480 [ 1148.618509] #1: ffff922ef14c4888 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x2a/0xb0 [ 1148.630729] #2: ffff92aedb5d7310 (kn->active#224){.+.+}-{0:0}, at: kernfs_seq_start+0x32/0xb0 [ 1148.643347] [ 1148.643347] stack backtrace: [ 1148.655259] CPU: 73 PID: 5008 Comm: cat Not tainted 5.8.0-rc3+ #827 [ 1148.665309] Hardware name: HGST H4060-S/S2600STB, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 1148.678394] Call Trace: [ 1148.684750] dump_stack+0x78/0xa0 [ 1148.691802] lock_release.cold+0x45/0x4a [ 1148.699451] __mutex_unlock_slowpath+0x35/0x270 [ 1148.707675] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.716092] dev_attr_show+0x19/0x40 [ 1148.723664] sysfs_kf_seq_show+0x87/0x100 [ 1148.731193] seq_read+0xbc/0x480 [ 1148.737882] vfs_read+0xa0/0x160 [ 1148.744514] ksys_read+0x58/0xd0 [ 1148.751129] do_syscall_64+0x4c/0xa0 [ 1148.757941] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1148.766240] RIP: 0033:0x7f1230566542 [ 1148.772957] Code: Bad RIP value. [ 1148.779206] RSP: 002b:00007ffeac1bcac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 1148.790063] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f1230566542 [ 1148.800284] RDX: 0000000000020000 RSI: 00007f1223460000 RDI: 0000000000000003 [ 1148.810474] RBP: 00007f1223460000 R08: 00007f122345f010 R09: 0000000000000000 [ 1148.820641] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000 [ 1148.830728] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000

Fix this by returning immediately instead of jumping to the out label.

Link: https://lore.kernel.org/r/20200701085254.51740-1-damien.lemoal@wdc.com Reviewed-by: Johannes Thumshirn johannes.thumshirn@wdc.com Acked-by: Sreekanth Reddy sreekanth.reddy@broadcom.com Signed-off-by: Damien Le Moal damien.lemoal@wdc.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/mpt3sas/mpt3sas_ctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index 62e552838565f..e94e72de2fc68 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -3145,7 +3145,7 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr, if (!ioc->is_warpdrive) { ioc_err(ioc, "%s: BRM attribute is only for warpdrive\n", __func__); - goto out; + return 0; } /* pci_access_mutex lock acquired by sysfs show path */ mutex_lock(&ioc->pci_access_mutex);

From: Kai Vehmanen kai.vehmanen@linux.intel.com

[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ]

When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs.

The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open.

The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins.

BugLink: https://github.com/thesofproject/linux/issues/1978 BugLink: https://github.com/thesofproject/linux/issues/2216 BugLink: https://github.com/thesofproject/linux/issues/2217 Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Kai Vehmanen kai.vehmanen@linux.intel.com Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_hdmi.c | 36 +++++++++++++++++++++++------------- 1 file changed, 23 insertions(+), 13 deletions(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 137d655fed8f8..e821c9df81070 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1804,33 +1804,43 @@ static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t cvt_nid)

static int hdmi_parse_codec(struct hda_codec *codec) { - hda_nid_t nid; + hda_nid_t start_nid; + unsigned int caps; int i, nodes;

- nodes = snd_hda_get_sub_nodes(codec, codec->core.afg, &nid); - if (!nid || nodes < 0) { + nodes = snd_hda_get_sub_nodes(codec, codec->core.afg, &start_nid); + if (!start_nid || nodes < 0) { codec_warn(codec, "HDMI: failed to get afg sub nodes\n"); return -EINVAL; }

- for (i = 0; i < nodes; i++, nid++) { - unsigned int caps; - unsigned int type; + /* + * hdmi_add_pin() assumes total amount of converters to + * be known, so first discover all converters + */ + for (i = 0; i < nodes; i++) { + hda_nid_t nid = start_nid + i;

caps = get_wcaps(codec, nid); - type = get_wcaps_type(caps);

if (!(caps & AC_WCAP_DIGITAL)) continue;

- switch (type) { - case AC_WID_AUD_OUT: + if (get_wcaps_type(caps) == AC_WID_AUD_OUT) hdmi_add_cvt(codec, nid); - break; - case AC_WID_PIN: + } + + /* discover audio pins */ + for (i = 0; i < nodes; i++) { + hda_nid_t nid = start_nid + i; + + caps = get_wcaps(codec, nid); + + if (!(caps & AC_WCAP_DIGITAL)) + continue; + + if (get_wcaps_type(caps) == AC_WID_PIN) hdmi_add_pin(codec, nid); - break; - } }

return 0;

From: Ben Skeggs bskeggs@redhat.com

[ Upstream commit 0156e76d388310a490aeb0f2fbb5b284ded3aecc ]

Tegra TRM says worst-case reply time is 1216us, and this should fix some spurious timeouts that have been popping up.

Signed-off-by: Ben Skeggs bskeggs@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c | 4 ++-- drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c index c8ab1b5741a3e..db7769cb33eba 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c @@ -118,10 +118,10 @@ g94_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry, if (retries) udelay(400);

- /* transaction request, wait up to 1ms for it to complete */ + /* transaction request, wait up to 2ms for it to complete */ nvkm_wr32(device, 0x00e4e4 + base, 0x00010000 | ctrl);

- timeout = 1000; + timeout = 2000; do { ctrl = nvkm_rd32(device, 0x00e4e4 + base); udelay(1); diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c index 7ef60895f43a7..edb6148cbca04 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c @@ -118,10 +118,10 @@ gm200_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry, if (retries) udelay(400);

- /* transaction request, wait up to 1ms for it to complete */ + /* transaction request, wait up to 2ms for it to complete */ nvkm_wr32(device, 0x00d954 + base, 0x00010000 | ctrl);

- timeout = 1000; + timeout = 2000; do { ctrl = nvkm_rd32(device, 0x00d954 + base); udelay(1);

From: Steve Schremmer steve.schremmer@netapp.com

[ Upstream commit e094fd346021b820f37188aaa6b502c7490ab5b5 ]

Add FUJITSU ETERNUS_AHB

Link: https://lore.kernel.org/r/DM6PR06MB5276CCA765336BD312C4282E8C660@DM6PR06MB52... Signed-off-by: Steve Schremmer steve.schremmer@netapp.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/scsi_devinfo.c | 1 + drivers/scsi/scsi_dh.c | 1 + 2 files changed, 2 insertions(+)

diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index eed31021e7885..ba84244c1b4f6 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -239,6 +239,7 @@ static struct { {"LSI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, {"ENGENIO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, {"LENOVO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, + {"FUJITSU", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, {"SanDisk", "Cruzer Blade", NULL, BLIST_TRY_VPD_PAGES | BLIST_INQUIRY_36}, {"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN | BLIST_INQUIRY_36}, diff --git a/drivers/scsi/scsi_dh.c b/drivers/scsi/scsi_dh.c index 42f0550d6b11f..6f41e4b5a2b85 100644 --- a/drivers/scsi/scsi_dh.c +++ b/drivers/scsi/scsi_dh.c @@ -63,6 +63,7 @@ static const struct scsi_dh_blist scsi_dh_blist[] = { {"LSI", "INF-01-00", "rdac", }, {"ENGENIO", "INF-01-00", "rdac", }, {"LENOVO", "DE_Series", "rdac", }, + {"FUJITSU", "ETERNUS_AHB", "rdac", }, {NULL, NULL, NULL }, };

From: Gavin Shan gshan@redhat.com

[ Upstream commit c377e67c6271954969384f9be1b1b71de13eba30 ]

The CPU mask (@tmp) should be released on failing to allocate @cpu_groups or any of its elements. Otherwise, it leads to memory leakage because the CPU mask variable is dynamically allocated when CONFIG_CPUMASK_OFFSTACK is enabled.

Signed-off-by: Gavin Shan gshan@redhat.com Reviewed-by: Sudeep Holla sudeep.holla@arm.com Link: https://lore.kernel.org/r/20200630075227.199624-1-gshan@redhat.com Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/psci/psci_checker.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/firmware/psci/psci_checker.c b/drivers/firmware/psci/psci_checker.c index 873841af8d575..d9b1a2d71223e 100644 --- a/drivers/firmware/psci/psci_checker.c +++ b/drivers/firmware/psci/psci_checker.c @@ -157,8 +157,10 @@ static int alloc_init_cpu_groups(cpumask_var_t **pcpu_groups)

cpu_groups = kcalloc(nb_available_cpus, sizeof(cpu_groups), GFP_KERNEL); - if (!cpu_groups) + if (!cpu_groups) { + free_cpumask_var(tmp); return -ENOMEM; + }

cpumask_copy(tmp, cpu_online_mask);

@@ -167,6 +169,7 @@ static int alloc_init_cpu_groups(cpumask_var_t **pcpu_groups) topology_core_cpumask(cpumask_any(tmp));

if (!alloc_cpumask_var(&cpu_groups[num_groups], GFP_KERNEL)) { + free_cpumask_var(tmp); free_cpu_groups(num_groups, &cpu_groups); return -ENOMEM; }

From: Thomas Gleixner tglx@linutronix.de

[ Upstream commit e3beca48a45b5e0e6e6a4e0124276b8248dcc9bb ]

Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after creating the irqdomain. The only purpose of these FW nodes is to convey name information. When this was introduced the core code did not store the pointer to the node in the irqdomain. A recent change stored the firmware node pointer in irqdomain for other reasons and missed to notice that the usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence are broken by this. Storing a dangling pointer is dangerous itself, but in case that the domain is destroyed later on this leads to a double free.

Remove the freeing of the firmware node after creating the irqdomain from all affected call sites to cure this.

Fixes: 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") Reported-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Acked-by: Bjorn Helgaas bhelgaas@google.com Acked-by: Marc Zyngier maz@kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/pci/pci-xtalk-bridge.c | 5 +++-- arch/x86/kernel/apic/io_apic.c | 10 +++++----- arch/x86/kernel/apic/msi.c | 18 ++++++++++++------ arch/x86/kernel/apic/vector.c | 1 - arch/x86/platform/uv/uv_irq.c | 3 ++- drivers/iommu/amd_iommu.c | 5 +++-- drivers/iommu/hyperv-iommu.c | 5 ++++- drivers/iommu/intel_irq_remapping.c | 2 +- drivers/mfd/ioc3.c | 5 +++-- drivers/pci/controller/vmd.c | 5 +++-- 10 files changed, 36 insertions(+), 23 deletions(-)

diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c index 3b2552fb77351..5958217861b86 100644 --- a/arch/mips/pci/pci-xtalk-bridge.c +++ b/arch/mips/pci/pci-xtalk-bridge.c @@ -627,9 +627,10 @@ static int bridge_probe(struct platform_device *pdev) return -ENOMEM; domain = irq_domain_create_hierarchy(parent, 0, 8, fn, &bridge_domain_ops, NULL); - irq_domain_free_fwnode(fn); - if (!domain) + if (!domain) { + irq_domain_free_fwnode(fn); return -ENOMEM; + }

pci_set_flags(PCI_PROBE_ONLY);

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 913c88617848b..57447f03ee87c 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2329,12 +2329,12 @@ static int mp_irqdomain_create(int ioapic) ip->irqdomain = irq_domain_create_linear(fn, hwirqs, cfg->ops, (void *)(long)ioapic);

- /* Release fw handle if it was allocated above */ - if (!cfg->dev) - irq_domain_free_fwnode(fn); - - if (!ip->irqdomain) + if (!ip->irqdomain) { + /* Release fw handle if it was allocated above */ + if (!cfg->dev) + irq_domain_free_fwnode(fn); return -ENOMEM; + }

ip->irqdomain->parent = parent;

diff --git a/arch/x86/kernel/apic/msi.c b/arch/x86/kernel/apic/msi.c index 159bd0cb85486..a20873bbbed67 100644 --- a/arch/x86/kernel/apic/msi.c +++ b/arch/x86/kernel/apic/msi.c @@ -262,12 +262,13 @@ void __init arch_init_msi_domain(struct irq_domain *parent) msi_default_domain = pci_msi_create_irq_domain(fn, &pci_msi_domain_info, parent); - irq_domain_free_fwnode(fn); } - if (!msi_default_domain) + if (!msi_default_domain) { + irq_domain_free_fwnode(fn); pr_warn("failed to initialize irqdomain for MSI/MSI-x.\n"); - else + } else { msi_default_domain->flags |= IRQ_DOMAIN_MSI_NOMASK_QUIRK; + } }

#ifdef CONFIG_IRQ_REMAP @@ -300,7 +301,8 @@ struct irq_domain *arch_create_remap_msi_irq_domain(struct irq_domain *parent, if (!fn) return NULL; d = pci_msi_create_irq_domain(fn, &pci_msi_ir_domain_info, parent); - irq_domain_free_fwnode(fn); + if (!d) + irq_domain_free_fwnode(fn); return d; } #endif @@ -363,7 +365,8 @@ static struct irq_domain *dmar_get_irq_domain(void) if (fn) { dmar_domain = msi_create_irq_domain(fn, &dmar_msi_domain_info, x86_vector_domain); - irq_domain_free_fwnode(fn); + if (!dmar_domain) + irq_domain_free_fwnode(fn); } out: mutex_unlock(&dmar_lock); @@ -488,7 +491,10 @@ struct irq_domain *hpet_create_irq_domain(int hpet_id) }

d = msi_create_irq_domain(fn, domain_info, parent); - irq_domain_free_fwnode(fn); + if (!d) { + irq_domain_free_fwnode(fn); + kfree(domain_info); + } return d; }

diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c index cf8b6ebc60314..410363e60968f 100644 --- a/arch/x86/kernel/apic/vector.c +++ b/arch/x86/kernel/apic/vector.c @@ -707,7 +707,6 @@ int __init arch_early_irq_init(void) x86_vector_domain = irq_domain_create_tree(fn, &x86_vector_domain_ops, NULL); BUG_ON(x86_vector_domain == NULL); - irq_domain_free_fwnode(fn); irq_set_default_host(x86_vector_domain);

arch_init_msi_domain(x86_vector_domain); diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c index fc13cbbb2dce2..abb6075397f05 100644 --- a/arch/x86/platform/uv/uv_irq.c +++ b/arch/x86/platform/uv/uv_irq.c @@ -167,9 +167,10 @@ static struct irq_domain *uv_get_irq_domain(void) goto out;

uv_domain = irq_domain_create_tree(fn, &uv_domain_ops, NULL); - irq_domain_free_fwnode(fn); if (uv_domain) uv_domain->parent = x86_vector_domain; + else + irq_domain_free_fwnode(fn); out: mutex_unlock(&uv_lock);

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index 2883ac389abbe..9c2e2ed828267 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -4090,9 +4090,10 @@ int amd_iommu_create_irq_domain(struct amd_iommu *iommu) if (!fn) return -ENOMEM; iommu->ir_domain = irq_domain_create_tree(fn, &amd_ir_domain_ops, iommu); - irq_domain_free_fwnode(fn); - if (!iommu->ir_domain) + if (!iommu->ir_domain) { + irq_domain_free_fwnode(fn); return -ENOMEM; + }

iommu->ir_domain->parent = arch_get_ir_parent_domain(); iommu->msi_domain = arch_create_remap_msi_irq_domain(iommu->ir_domain, diff --git a/drivers/iommu/hyperv-iommu.c b/drivers/iommu/hyperv-iommu.c index a386b83e0e34b..f0fe5030acd36 100644 --- a/drivers/iommu/hyperv-iommu.c +++ b/drivers/iommu/hyperv-iommu.c @@ -155,7 +155,10 @@ static int __init hyperv_prepare_irq_remapping(void) 0, IOAPIC_REMAPPING_ENTRY, fn, &hyperv_ir_domain_ops, NULL);

- irq_domain_free_fwnode(fn); + if (!ioapic_ir_domain) { + irq_domain_free_fwnode(fn); + return -ENOMEM; + }

/* * Hyper-V doesn't provide irq remapping function for diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c index 81e43c1df7ecb..982d796b686b8 100644 --- a/drivers/iommu/intel_irq_remapping.c +++ b/drivers/iommu/intel_irq_remapping.c @@ -563,8 +563,8 @@ static int intel_setup_irq_remapping(struct intel_iommu *iommu) 0, INTR_REMAP_TABLE_ENTRIES, fn, &intel_ir_domain_ops, iommu); - irq_domain_free_fwnode(fn); if (!iommu->ir_domain) { + irq_domain_free_fwnode(fn); pr_err("IR%d: failed to allocate irqdomain\n", iommu->seq_id); goto out_free_bitmap; } diff --git a/drivers/mfd/ioc3.c b/drivers/mfd/ioc3.c index 02998d4eb74b0..74cee7cb0afc9 100644 --- a/drivers/mfd/ioc3.c +++ b/drivers/mfd/ioc3.c @@ -142,10 +142,11 @@ static int ioc3_irq_domain_setup(struct ioc3_priv_data *ipd, int irq) goto err;

domain = irq_domain_create_linear(fn, 24, &ioc3_irq_domain_ops, ipd); - if (!domain) + if (!domain) { + irq_domain_free_fwnode(fn); goto err; + }

- irq_domain_free_fwnode(fn); ipd->domain = domain;

irq_set_chained_handler_and_data(irq, ioc3_irq_handler, domain); diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c index e386d4eac4070..9a64cf90c291b 100644 --- a/drivers/pci/controller/vmd.c +++ b/drivers/pci/controller/vmd.c @@ -546,9 +546,10 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)

vmd->irq_domain = pci_msi_create_irq_domain(fn, &vmd_msi_domain_info, x86_vector_domain); - irq_domain_free_fwnode(fn); - if (!vmd->irq_domain) + if (!vmd->irq_domain) { + irq_domain_free_fwnode(fn); return -ENODEV; + }

pci_add_resource(&resources, &vmd->resources[0]); pci_add_resource_offset(&resources, &vmd->resources[1], offset[0]);

From: Jerry (Fangzhi) Zuo Jerry.Zuo@amd.com

[ Upstream commit 17bdb4a82fe5014c8aa5b2103c80c5729744a096 ]

Signed-off-by: Jerry (Fangzhi) Zuo Jerry.Zuo@amd.com Reviewed-by: Hersen Wu hersenxs.wu@amd.com Acked-by: Aurabindo Pillai aurabindo.pillai@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index d06fa63801799..7da2a22dbde7e 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -1342,9 +1342,14 @@ static int dm_late_init(void *handle) struct dmcu_iram_parameters params; unsigned int linear_lut[16]; int i; - struct dmcu *dmcu = adev->dm.dc->res_pool->dmcu; + struct dmcu *dmcu = NULL; bool ret;

+ if (!adev->dm.fw_dmcu) + return detect_mst_link_for_all_connectors(adev->ddev); + + dmcu = adev->dm.dc->res_pool->dmcu; + for (i = 0; i < 16; i++) linear_lut[i] = 0xFFFF * i / 15;

From: Gabriel Krisman Bertazi krisman@collabora.com

[ Upstream commit 087615bf3acdafd0ba7c7c9ed5286e7b7c80fe1b ]

The HST path selector needs this information to perform path prediction. For request-based mpath, struct request's io_start_time_ns is used, while for bio-based, use the start_time stored in dm_io.

Signed-off-by: Gabriel Krisman Bertazi krisman@collabora.com Signed-off-by: Mike Snitzer snitzer@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-mpath.c | 9 ++++++--- drivers/md/dm-path-selector.h | 2 +- drivers/md/dm-queue-length.c | 2 +- drivers/md/dm-service-time.c | 2 +- drivers/md/dm.c | 9 +++++++++ include/linux/device-mapper.h | 2 ++ 6 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index e0c800cf87a9b..74246d7c7d68e 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -567,7 +567,8 @@ static void multipath_release_clone(struct request *clone, if (pgpath && pgpath->pg->ps.type->end_io) pgpath->pg->ps.type->end_io(&pgpath->pg->ps, &pgpath->path, - mpio->nr_bytes); + mpio->nr_bytes, + clone->io_start_time_ns); }

blk_put_request(clone); @@ -1617,7 +1618,8 @@ static int multipath_end_io(struct dm_target *ti, struct request *clone, struct path_selector *ps = &pgpath->pg->ps;

if (ps->type->end_io) - ps->type->end_io(ps, &pgpath->path, mpio->nr_bytes); + ps->type->end_io(ps, &pgpath->path, mpio->nr_bytes, + clone->io_start_time_ns); }

return r; @@ -1661,7 +1663,8 @@ static int multipath_end_io_bio(struct dm_target *ti, struct bio *clone, struct path_selector *ps = &pgpath->pg->ps;

if (ps->type->end_io) - ps->type->end_io(ps, &pgpath->path, mpio->nr_bytes); + ps->type->end_io(ps, &pgpath->path, mpio->nr_bytes, + dm_start_time_ns_from_clone(clone)); }

return r; diff --git a/drivers/md/dm-path-selector.h b/drivers/md/dm-path-selector.h index b6eb5365b1a46..c47bc0e20275b 100644 --- a/drivers/md/dm-path-selector.h +++ b/drivers/md/dm-path-selector.h @@ -74,7 +74,7 @@ struct path_selector_type { int (*start_io) (struct path_selector *ps, struct dm_path *path, size_t nr_bytes); int (*end_io) (struct path_selector *ps, struct dm_path *path, - size_t nr_bytes); + size_t nr_bytes, u64 start_time); };

/* Register a path selector */ diff --git a/drivers/md/dm-queue-length.c b/drivers/md/dm-queue-length.c index 969c4f1a36336..5fd018d184187 100644 --- a/drivers/md/dm-queue-length.c +++ b/drivers/md/dm-queue-length.c @@ -227,7 +227,7 @@ static int ql_start_io(struct path_selector *ps, struct dm_path *path, }

static int ql_end_io(struct path_selector *ps, struct dm_path *path, - size_t nr_bytes) + size_t nr_bytes, u64 start_time) { struct path_info *pi = path->pscontext;

diff --git a/drivers/md/dm-service-time.c b/drivers/md/dm-service-time.c index f006a9005593b..9cfda665e9ebd 100644 --- a/drivers/md/dm-service-time.c +++ b/drivers/md/dm-service-time.c @@ -309,7 +309,7 @@ static int st_start_io(struct path_selector *ps, struct dm_path *path, }

static int st_end_io(struct path_selector *ps, struct dm_path *path, - size_t nr_bytes) + size_t nr_bytes, u64 start_time) { struct path_info *pi = path->pscontext;

diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 9793b04e9ff3b..cefda95c9abb7 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -676,6 +676,15 @@ static bool md_in_flight(struct mapped_device *md) return md_in_flight_bios(md); }

+u64 dm_start_time_ns_from_clone(struct bio *bio) +{ + struct dm_target_io *tio = container_of(bio, struct dm_target_io, clone); + struct dm_io *io = tio->io; + + return jiffies_to_nsecs(io->start_time); +} +EXPORT_SYMBOL_GPL(dm_start_time_ns_from_clone); + static void start_io_acct(struct dm_io *io) { struct mapped_device *md = io->md; diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index af48d9da39160..934037d938b9a 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -332,6 +332,8 @@ void *dm_per_bio_data(struct bio *bio, size_t data_size); struct bio *dm_bio_from_per_bio_data(void *data, size_t data_size); unsigned dm_bio_get_target_bio_nr(const struct bio *bio);

+u64 dm_start_time_ns_from_clone(struct bio *bio); + int dm_register_target(struct target_type *t); void dm_unregister_target(struct target_type *t);

From: Olga Kornievskaia kolga@netapp.com

commit 65caafd0d2145d1dd02072c4ced540624daeab40 upstream.

Reverting commit d03727b248d0 "NFSv4 fix CLOSE not waiting for direct IO compeletion". This patch made it so that fput() by calling inode_dio_done() in nfs_file_release() would wait uninterruptably for any outstanding directIO to the file (but that wait on IO should be killable).

The problem the patch was also trying to address was REMOVE returning ERR_ACCESS because the file is still opened, is supposed to be resolved by server returning ERR_FILE_OPEN and not ERR_ACCESS.

Signed-off-by: Olga Kornievskaia kolga@netapp.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/nfs/direct.c | 13 ++++--------- fs/nfs/file.c | 1 - 2 files changed, 4 insertions(+), 10 deletions(-)

--- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -267,6 +267,8 @@ static void nfs_direct_complete(struct n { struct inode *inode = dreq->inode;

+ inode_dio_end(inode); + if (dreq->iocb) { long res = (long) dreq->error; if (dreq->count != 0) { @@ -278,10 +280,7 @@ static void nfs_direct_complete(struct n

complete(&dreq->completion);

- igrab(inode); nfs_direct_req_release(dreq); - inode_dio_end(inode); - iput(inode); }

static void nfs_direct_read_completion(struct nfs_pgio_header *hdr) @@ -411,10 +410,8 @@ static ssize_t nfs_direct_read_schedule_ * generic layer handle the completion. */ if (requested_bytes == 0) { - igrab(inode); - nfs_direct_req_release(dreq); inode_dio_end(inode); - iput(inode); + nfs_direct_req_release(dreq); return result < 0 ? result : -EIO; }

@@ -867,10 +864,8 @@ static ssize_t nfs_direct_write_schedule * generic layer handle the completion. */ if (requested_bytes == 0) { - igrab(inode); - nfs_direct_req_release(dreq); inode_dio_end(inode); - iput(inode); + nfs_direct_req_release(dreq); return result < 0 ? result : -EIO; }

--- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -83,7 +83,6 @@ nfs_file_release(struct inode *inode, st dprintk("NFS: release(%pD2)\n", filp);

nfs_inc_stats(inode, NFSIOS_VFSRELEASE); - inode_dio_wait(inode); nfs_file_clear_open_context(filp); return 0; }

From: Namjae Jeon namjae.jeon@samsung.com

commit d2fa0c337d97a5490190b9f3b9c73c8f9f3602a1 upstream.

We found the wrong hint_stat initialization in exfat_find_dir_entry(). It should be initialized when cluster is EXFAT_EOF_CLUSTER.

Fixes: ca06197382bd ("exfat: add directory operations") Cc: stable@vger.kernel.org # v5.7 Reviewed-by: Sungjong Seo sj1557.seo@samsung.com Signed-off-by: Namjae Jeon namjae.jeon@samsung.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/exfat/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/exfat/dir.c +++ b/fs/exfat/dir.c @@ -1160,7 +1160,7 @@ found: ret = exfat_get_next_cluster(sb, &clu.dir); }

- if (ret || clu.dir != EXFAT_EOF_CLUSTER) { + if (ret || clu.dir == EXFAT_EOF_CLUSTER) { /* just initialized hint_stat */ hint_stat->clu = p_dir->dir; hint_stat->eidx = 0;

From: Ilya Ponetayev i.ponetaev@ndmsystems.com

commit db415f7aae07cadcabd5d2a659f8ad825c905299 upstream.

On-disk format for name_hash field is LE, so it must be explicitly transformed on BE system for proper result.

Fixes: 370e812b3ec1 ("exfat: add nls operations") Cc: stable@vger.kernel.org # v5.7 Signed-off-by: Chen Minqiang ptpt52@gmail.com Signed-off-by: Ilya Ponetayev i.ponetaev@ndmsystems.com Reviewed-by: Sungjong Seo sj1557.seo@samsung.com Signed-off-by: Namjae Jeon namjae.jeon@samsung.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/exfat/nls.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/fs/exfat/nls.c +++ b/fs/exfat/nls.c @@ -495,7 +495,7 @@ static int exfat_utf8_to_utf16(struct su struct exfat_uni_name *p_uniname, int *p_lossy) { int i, unilen, lossy = NLS_NAME_NO_LOSSY; - unsigned short upname[MAX_NAME_LENGTH + 1]; + __le16 upname[MAX_NAME_LENGTH + 1]; unsigned short *uniname = p_uniname->name;

WARN_ON(!len); @@ -523,7 +523,7 @@ static int exfat_utf8_to_utf16(struct su exfat_wstrchr(bad_uni_chars, *uniname)) lossy |= NLS_NAME_LOSSY;

- upname[i] = exfat_toupper(sb, *uniname); + upname[i] = cpu_to_le16(exfat_toupper(sb, *uniname)); uniname++; }

@@ -614,7 +614,7 @@ static int exfat_nls_to_ucs2(struct supe struct exfat_uni_name *p_uniname, int *p_lossy) { int i = 0, unilen = 0, lossy = NLS_NAME_NO_LOSSY; - unsigned short upname[MAX_NAME_LENGTH + 1]; + __le16 upname[MAX_NAME_LENGTH + 1]; unsigned short *uniname = p_uniname->name; struct nls_table *nls = EXFAT_SB(sb)->nls_io;

@@ -628,7 +628,7 @@ static int exfat_nls_to_ucs2(struct supe exfat_wstrchr(bad_uni_chars, *uniname)) lossy |= NLS_NAME_LOSSY;

- upname[unilen] = exfat_toupper(sb, *uniname); + upname[unilen] = cpu_to_le16(exfat_toupper(sb, *uniname)); uniname++; unilen++; }

From: Oleg Nesterov oleg@redhat.com

commit fe5ed7ab99c656bd2f5b79b49df0e9ebf2cead8a upstream.

If a tracee is uprobed and it hits int3 inserted by debugger, handle_swbp() does send_sig(SIGTRAP, current, 0) which means si_code == SI_USER. This used to work when this code was written, but then GDB started to validate si_code and now it simply can't use breakpoints if the tracee has an active uprobe:

# cat test.c void unused_func(void) { } int main(void) { return 0; }

# gcc -g test.c -o test # perf probe -x ./test -a unused_func # perf record -e probe_test:unused_func gdb ./test -ex run GNU gdb (GDB) 10.0.50.20200714-git ... Program received signal SIGTRAP, Trace/breakpoint trap. 0x00007ffff7ddf909 in dl_main () from /lib64/ld-linux-x86-64.so.2 (gdb)

The tracee hits the internal breakpoint inserted by GDB to monitor shared library events but GDB misinterprets this SIGTRAP and reports a signal.

Change handle_swbp() to use force_sig(SIGTRAP), this matches do_int3_user() and fixes the problem.

This is the minimal fix for -stable, arch/x86/kernel/uprobes.c is equally wrong; it should use send_sigtrap(TRAP_TRACE) instead of send_sig(SIGTRAP), but this doesn't confuse GDB and needs another x86-specific patch.

Reported-by: Aaron Merey amerey@redhat.com Signed-off-by: Oleg Nesterov oleg@redhat.com Signed-off-by: Ingo Molnar mingo@kernel.org Reviewed-by: Srikar Dronamraju srikar@linux.vnet.ibm.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200723154420.GA32043@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/events/uprobes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -2205,7 +2205,7 @@ static void handle_swbp(struct pt_regs * if (!uprobe) { if (is_swbp > 0) { /* No matching uprobe; signal SIGTRAP. */ - send_sig(SIGTRAP, current, 0); + force_sig(SIGTRAP); } else { /* * Either we raced with uprobe_unregister() or we can't

From: Takashi Iwai tiwai@suse.de

commit 60379ba08532eca861e933b389526a4dc89e0c42 upstream.

snd_info_get_line() has a sanity check of NULL buffer -- both buffer itself being NULL and buffer->buffer being NULL. Basically both checks are valid and necessary, but the problem is that it's with snd_BUG_ON() macro that triggers WARN_ON(). The latter condition (NULL buffer->buffer) can be met arbitrarily by user since the buffer is allocated at the first write, so it means that user can trigger WARN_ON() at will.

This patch addresses it by simply moving buffer->buffer NULL check out of snd_BUG_ON() so that spurious WARNING is no longer triggered.

Reported-by: syzbot+e42d0746c3c3699b6061@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200717084023.5928-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/core/info.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/sound/core/info.c +++ b/sound/core/info.c @@ -606,7 +606,9 @@ int snd_info_get_line(struct snd_info_bu { int c;

- if (snd_BUG_ON(!buffer || !buffer->buffer)) + if (snd_BUG_ON(!buffer)) + return 1; + if (!buffer->buffer) return 1; if (len <= 0 || buffer->stop || buffer->error) return 1;

From: Hans de Goede hdegoede@redhat.com

commit 0ceb8a36d023d4bb4ffca3474a452fb1dfaa0ef2 upstream.

The default mode for SSP configuration is TDM 4 slot and so far we were using this for the bus format on cht-bsw-rt56732 boards.

One board, the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The second piggy-backed, output-only codec is inside the keyboard-dock (which has extra speakers). Unlike the main rt5672 codec, we cannot configure this codec, it is hard coded to use 2 channel 24 bit I2S.

Using 4 channel TDM leads to the dock speakers codec (which listens in on the data send from the SSP to the rt5672 codec) emiting horribly distorted sound.

Since we only support 2 channels anyways, there is no need for TDM on any cht-bsw-rt5672 designs. So we can simply use I2S 2ch everywhere.

This commit fixes the Lenovo Miix 2 10 dock speakers issue by changing the bus format set in cht_codec_fixup() to I2S 2 channel.

This change has been tested on the following devices with a rt5672 codec:

Lenovo Miix 2 10 Lenovo Thinkpad 8 Lenovo Thinkpad 10 (gen 1)

Signed-off-by: Hans de Goede hdegoede@redhat.com Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723 Link: https://lore.kernel.org/r/20200628155231.71089-2-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/soc/intel/boards/cht_bsw_rt5672.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-)

--- a/sound/soc/intel/boards/cht_bsw_rt5672.c +++ b/sound/soc/intel/boards/cht_bsw_rt5672.c @@ -253,21 +253,20 @@ static int cht_codec_fixup(struct snd_so params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);

/* - * Default mode for SSP configuration is TDM 4 slot + * Default mode for SSP configuration is TDM 4 slot. One board/design, + * the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The + * second piggy-backed, output-only codec is inside the keyboard-dock + * (which has extra speakers). Unlike the main rt5672 codec, we cannot + * configure this codec, it is hard coded to use 2 channel 24 bit I2S. + * Since we only support 2 channels anyways, there is no need for TDM + * on any cht-bsw-rt5672 designs. So we simply use I2S 2ch everywhere. */ - ret = snd_soc_dai_set_fmt(asoc_rtd_to_codec(rtd, 0), - SND_SOC_DAIFMT_DSP_B | - SND_SOC_DAIFMT_IB_NF | + ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); if (ret < 0) { - dev_err(rtd->dev, "can't set format to TDM %d\n", ret); - return ret; - } - - /* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */ - ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_codec(rtd, 0), 0xF, 0xF, 4, 24); - if (ret < 0) { - dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret); + dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); return ret; }

From: Filipe Manana fdmanana@suse.com

commit 580c079b5766ac706f56eec5c79aee4bf929fef6 upstream.

At btrfs_find_all_roots_safe() we allocate a ulist and set the **roots argument to point to it. However if later we fail due to an error returned by find_parent_nodes(), we free that ulist but leave a dangling pointer in the **roots argument. Upon receiving the error, a caller of this function can attempt to free the same ulist again, resulting in an invalid memory access.

One such scenario is during qgroup accounting:

btrfs_qgroup_account_extents()

--> calls btrfs_find_all_roots() passes &new_roots (a stack allocated pointer) to btrfs_find_all_roots()

--> btrfs_find_all_roots() just calls btrfs_find_all_roots_safe() passing &new_roots to it

--> allocates ulist and assigns its address to **roots (which points to new_roots from btrfs_qgroup_account_extents())

--> find_parent_nodes() returns an error, so we free the ulist and leave **roots pointing to it after returning

--> btrfs_qgroup_account_extents() sees btrfs_find_all_roots() returned an error and jumps to the label 'cleanup', which just tries to free again the same ulist

Stack trace example:

------------[ cut here ]------------ BTRFS: tree first key check failed WARNING: CPU: 1 PID: 1763215 at fs/btrfs/disk-io.c:422 btrfs_verify_level_key+0xe0/0x180 [btrfs] Modules linked in: dm_snapshot dm_thin_pool (...) CPU: 1 PID: 1763215 Comm: fsstress Tainted: G W 5.8.0-rc3-btrfs-next-64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_verify_level_key+0xe0/0x180 [btrfs] Code: 28 5b 5d (...) RSP: 0018:ffffb89b473779a0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff90397759bf08 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000027 RDI: 00000000ffffffff RBP: ffff9039a419c000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: ffffb89b43301000 R12: 000000000000005e R13: ffffb89b47377a2e R14: ffffb89b473779af R15: 0000000000000000 FS: 00007fc47e1e1000(0000) GS:ffff9039ac200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc47e1df000 CR3: 00000003d9e4e001 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: read_block_for_search+0xf6/0x350 [btrfs] btrfs_next_old_leaf+0x242/0x650 [btrfs] resolve_indirect_refs+0x7cf/0x9e0 [btrfs] find_parent_nodes+0x4ea/0x12c0 [btrfs] btrfs_find_all_roots_safe+0xbf/0x130 [btrfs] btrfs_qgroup_account_extents+0x9d/0x390 [btrfs] btrfs_commit_transaction+0x4f7/0xb20 [btrfs] btrfs_sync_file+0x3d4/0x4d0 [btrfs] do_fsync+0x38/0x70 __x64_sys_fdatasync+0x13/0x20 do_syscall_64+0x5c/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc47e2d72e3 Code: Bad RIP value. RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffb8eb5e85>] copy_process+0x755/0x1eb0 softirqs last enabled at (0): [<ffffffffb8eb5e85>] copy_process+0x755/0x1eb0 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace 8639237550317b48 ]--- BTRFS error (device sdc): tree first key mismatch detected, bytenr=62324736 parent_transid=94 key expected=(262,108,1351680) has=(259,108,1921024) general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 2 PID: 1763215 Comm: fsstress Tainted: G W 5.8.0-rc3-btrfs-next-64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ulist_release+0x14/0x60 [btrfs] Code: c7 07 00 (...) RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840 FS: 00007fc47e1e1000(0000) GS:ffff9039ac600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8c1c0a51c8 CR3: 00000003d9e4e004 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ulist_free+0x13/0x20 [btrfs] btrfs_qgroup_account_extents+0xf3/0x390 [btrfs] btrfs_commit_transaction+0x4f7/0xb20 [btrfs] btrfs_sync_file+0x3d4/0x4d0 [btrfs] do_fsync+0x38/0x70 __x64_sys_fdatasync+0x13/0x20 do_syscall_64+0x5c/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc47e2d72e3 Code: Bad RIP value. RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50 Modules linked in: dm_snapshot dm_thin_pool (...) ---[ end trace 8639237550317b49 ]--- RIP: 0010:ulist_release+0x14/0x60 [btrfs] Code: c7 07 00 (...) RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840 FS: 00007fc47e1e1000(0000) GS:ffff9039ad200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6a776f7d40 CR3: 00000003d9e4e002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fix this by making btrfs_find_all_roots_safe() set *roots to NULL after it frees the ulist.

Fixes: 8da6d5815c592b ("Btrfs: added btrfs_find_all_roots()") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik josef@toxicpanda.com Signed-off-by: Filipe Manana fdmanana@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/btrfs/backref.c | 1 + 1 file changed, 1 insertion(+)

--- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -1465,6 +1465,7 @@ static int btrfs_find_all_roots_safe(str if (ret < 0 && ret != -ENOENT) { ulist_free(tmp); ulist_free(*roots); + *roots = NULL; return ret; } node = ulist_next(tmp, &uiter);

From: Robbie Ko robbieko@synology.com

commit 5909ca110b29aa16b23b52b8de8d3bb1035fd738 upstream.

When locking pages for delalloc, we check if it's dirty and mapping still matches. If it does not match, we need to return -EAGAIN and release all pages. Only the current page was put though, iterate over all the remaining pages too.

CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Filipe Manana fdmanana@suse.com Reviewed-by: Nikolay Borisov nborisov@suse.com Signed-off-by: Robbie Ko robbieko@synology.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/btrfs/extent_io.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1999,7 +1999,8 @@ static int __process_pages_contig(struct if (!PageDirty(pages[i]) || pages[i]->mapping != mapping) { unlock_page(pages[i]); - put_page(pages[i]); + for (; i < ret; i++) + put_page(pages[i]); err = -EAGAIN; goto out; }

From: Ard Biesheuvel ardb@kernel.org

[ Upstream commit f88814cc2578c121e6edef686365036db72af0ed ]

Commit

bf67fad19e493b ("efi: Use more granular check for availability for variable services")

introduced a check into the efivarfs, efi-pstore and other drivers that aborts loading of the module if not all three variable runtime services (GetVariable, SetVariable and GetNextVariable) are supported. However, this results in efivarfs being unavailable entirely if only SetVariable support is missing, which is only needed if you want to make any modifications. Also, efi-pstore and the sysfs EFI variable interface could be backed by another implementation of the 'efivars' abstraction, in which case it is completely irrelevant which services are supported by the EFI firmware.

So make the generic 'efivars' abstraction dependent on the availibility of the GetVariable and GetNextVariable EFI runtime services, and add a helper 'efivar_supports_writes()' to find out whether the currently active efivars abstraction supports writes (and wire it up to the availability of SetVariable for the generic one).

Then, use the efivar_supports_writes() helper to decide whether to permit efivarfs to be mounted read-write, and whether to enable efi-pstore or the sysfs EFI variable interface altogether.

Fixes: bf67fad19e493b ("efi: Use more granular check for availability for variable services") Reported-by: Heinrich Schuchardt xypron.glpk@gmx.de Acked-by: Ilias Apalodimas ilias.apalodimas@linaro.org Tested-by: Ilias Apalodimas ilias.apalodimas@linaro.org Signed-off-by: Ard Biesheuvel ardb@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/efi/efi-pstore.c | 5 +---- drivers/firmware/efi/efi.c | 12 ++++++++---- drivers/firmware/efi/efivars.c | 5 +---- drivers/firmware/efi/vars.c | 6 ++++++ fs/efivarfs/super.c | 6 +++--- include/linux/efi.h | 1 + 6 files changed, 20 insertions(+), 15 deletions(-)

diff --git a/drivers/firmware/efi/efi-pstore.c b/drivers/firmware/efi/efi-pstore.c index c2f1d4e6630b1..feb7fe6f2da76 100644 --- a/drivers/firmware/efi/efi-pstore.c +++ b/drivers/firmware/efi/efi-pstore.c @@ -356,10 +356,7 @@ static struct pstore_info efi_pstore_info = {

static __init int efivars_pstore_init(void) { - if (!efi_rt_services_supported(EFI_RT_SUPPORTED_VARIABLE_SERVICES)) - return 0; - - if (!efivars_kobject()) + if (!efivars_kobject() || !efivar_supports_writes()) return 0;

if (efivars_pstore_disable) diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index 20a7ba47a7924..99446b3847265 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -176,11 +176,13 @@ static struct efivar_operations generic_ops; static int generic_ops_register(void) { generic_ops.get_variable = efi.get_variable; - generic_ops.set_variable = efi.set_variable; - generic_ops.set_variable_nonblocking = efi.set_variable_nonblocking; generic_ops.get_next_variable = efi.get_next_variable; generic_ops.query_variable_store = efi_query_variable_store;

+ if (efi_rt_services_supported(EFI_RT_SUPPORTED_SET_VARIABLE)) { + generic_ops.set_variable = efi.set_variable; + generic_ops.set_variable_nonblocking = efi.set_variable_nonblocking; + } return efivars_register(&generic_efivars, &generic_ops, efi_kobj); }

@@ -382,7 +384,8 @@ static int __init efisubsys_init(void) return -ENOMEM; }

- if (efi_rt_services_supported(EFI_RT_SUPPORTED_VARIABLE_SERVICES)) { + if (efi_rt_services_supported(EFI_RT_SUPPORTED_GET_VARIABLE | + EFI_RT_SUPPORTED_GET_NEXT_VARIABLE_NAME)) { efivar_ssdt_load(); error = generic_ops_register(); if (error) @@ -416,7 +419,8 @@ static int __init efisubsys_init(void) err_remove_group: sysfs_remove_group(efi_kobj, &efi_subsys_attr_group); err_unregister: - if (efi_rt_services_supported(EFI_RT_SUPPORTED_VARIABLE_SERVICES)) + if (efi_rt_services_supported(EFI_RT_SUPPORTED_GET_VARIABLE | + EFI_RT_SUPPORTED_GET_NEXT_VARIABLE_NAME)) generic_ops_unregister(); err_put: kobject_put(efi_kobj); diff --git a/drivers/firmware/efi/efivars.c b/drivers/firmware/efi/efivars.c index 26528a46d99e9..dcea137142b3c 100644 --- a/drivers/firmware/efi/efivars.c +++ b/drivers/firmware/efi/efivars.c @@ -680,11 +680,8 @@ int efivars_sysfs_init(void) struct kobject *parent_kobj = efivars_kobject(); int error = 0;

- if (!efi_rt_services_supported(EFI_RT_SUPPORTED_VARIABLE_SERVICES)) - return -ENODEV; - /* No efivars has been registered yet */ - if (!parent_kobj) + if (!parent_kobj || !efivar_supports_writes()) return 0;

printk(KERN_INFO "EFI Variables Facility v%s %s\n", EFIVARS_VERSION, diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c index 5f2a4d162795c..973eef234b365 100644 --- a/drivers/firmware/efi/vars.c +++ b/drivers/firmware/efi/vars.c @@ -1229,3 +1229,9 @@ out: return rv; } EXPORT_SYMBOL_GPL(efivars_unregister); + +int efivar_supports_writes(void) +{ + return __efivars && __efivars->ops->set_variable; +} +EXPORT_SYMBOL_GPL(efivar_supports_writes); diff --git a/fs/efivarfs/super.c b/fs/efivarfs/super.c index 12c66f5d92dd2..28bb5689333a5 100644 --- a/fs/efivarfs/super.c +++ b/fs/efivarfs/super.c @@ -201,6 +201,9 @@ static int efivarfs_fill_super(struct super_block *sb, struct fs_context *fc) sb->s_d_op = &efivarfs_d_ops; sb->s_time_gran = 1;

+ if (!efivar_supports_writes()) + sb->s_flags |= SB_RDONLY; + inode = efivarfs_get_inode(sb, NULL, S_IFDIR | 0755, 0, true); if (!inode) return -ENOMEM; @@ -252,9 +255,6 @@ static struct file_system_type efivarfs_type = {

static __init int efivarfs_init(void) { - if (!efi_rt_services_supported(EFI_RT_SUPPORTED_VARIABLE_SERVICES)) - return -ENODEV; - if (!efivars_kobject()) return -ENODEV;

diff --git a/include/linux/efi.h b/include/linux/efi.h index 9430d01c0c3d3..650794abfa326 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -991,6 +991,7 @@ int efivars_register(struct efivars *efivars, int efivars_unregister(struct efivars *efivars); struct kobject *efivars_kobject(void);

+int efivar_supports_writes(void); int efivar_init(int (*func)(efi_char16_t *, efi_guid_t, unsigned long, void *), void *data, bool duplicates, struct list_head *head);

From: Vasundhara Volam vasundhara-v.volam@broadcom.com

[ Upstream commit ca0c753815fe4786b79a80abf0412eb5d52090b8 ]

In a shared port PHY configuration, async event is received when any of the port modifies the configuration. Ethtool link settings should be initialised after updated PHY configuration from firmware.

Fixes: b1613e78e98d ("bnxt_en: Add async. event logic for PHY configuration changes.") Signed-off-by: Vasundhara Volam vasundhara-v.volam@broadcom.com Signed-off-by: Michael Chan michael.chan@broadcom.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index b6fb5a1709c01..198bca9c1e2df 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -10362,15 +10362,15 @@ static void bnxt_sp_task(struct work_struct *work) &bp->sp_event)) bnxt_hwrm_phy_qcaps(bp);

- if (test_and_clear_bit(BNXT_LINK_CFG_CHANGE_SP_EVENT, - &bp->sp_event)) - bnxt_init_ethtool_link_settings(bp); - rc = bnxt_update_link(bp, true); - mutex_unlock(&bp->link_lock); if (rc) netdev_err(bp->dev, "SP task can't update link (rc: %x)\n", rc); + + if (test_and_clear_bit(BNXT_LINK_CFG_CHANGE_SP_EVENT, + &bp->sp_event)) + bnxt_init_ethtool_link_settings(bp); + mutex_unlock(&bp->link_lock); } if (test_and_clear_bit(BNXT_UPDATE_PHY_SP_EVENT, &bp->sp_event)) { int rc;

From: Xu Yilun yilun.xu@intel.com

[ Upstream commit e19485dc7a0d210b428a249c0595769bd495fb71 ]

This is to fix lkp cppcheck warnings:

drivers/fpga/dfl-pci.c:230:6: warning: The scope of the variable 'ret' can be reduced. [variableScope] int ret = 0; ^

drivers/fpga/dfl-pci.c:230:10: warning: Variable 'ret' is assigned a value that is never used. [unreadVariable] int ret = 0; ^

Fixes: 3c2760b78f90 ("fpga: dfl: pci: fix return value of cci_pci_sriov_configure") Reported-by: kbuild test robot lkp@intel.com Signed-off-by: Xu Yilun yilun.xu@intel.com Acked-by: Wu Hao hao.wu@intel.com Reviewed-by: Tom Rix trix@redhat.com Signed-off-by: Moritz Fischer mdf@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/fpga/dfl-pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c index 538755062ab7c..a78c409bf2c44 100644 --- a/drivers/fpga/dfl-pci.c +++ b/drivers/fpga/dfl-pci.c @@ -227,7 +227,6 @@ static int cci_pci_sriov_configure(struct pci_dev *pcidev, int num_vfs) { struct cci_drvdata *drvdata = pci_get_drvdata(pcidev); struct dfl_fpga_cdev *cdev = drvdata->cdev; - int ret = 0;

if (!num_vfs) { /* @@ -239,6 +238,8 @@ static int cci_pci_sriov_configure(struct pci_dev *pcidev, int num_vfs) dfl_fpga_cdev_config_ports_pf(cdev);

} else { + int ret; + /* * before enable SRIOV, put released ports into VF access mode * first of all.

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit 3195c4706b00106aa82c73acd28340fa8fc2bfc1 ]

The size used when calling 'pci_alloc_consistent()' and 'pci_free_consistent()' should match.

Fix it and have it consistent with the corresponding call in 'rr_close()'.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/hippi/rrunner.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c index 2a6ec53949666..a4b3fce69ecd9 100644 --- a/drivers/net/hippi/rrunner.c +++ b/drivers/net/hippi/rrunner.c @@ -1242,7 +1242,7 @@ static int rr_open(struct net_device *dev) rrpriv->info = NULL; } if (rrpriv->rx_ctrl) { - pci_free_consistent(pdev, sizeof(struct ring_ctrl), + pci_free_consistent(pdev, 256 * sizeof(struct ring_ctrl), rrpriv->rx_ctrl, rrpriv->rx_ctrl_dma); rrpriv->rx_ctrl = NULL; }

From: Ioana Ciornei ioana.ciornei@nxp.com

[ Upstream commit 841eb4012cef84820e5906527b31a854f42b0748 ]

The fsl_mc_get_endpoint() function can return an error or directly a NULL pointer in case the peer device is not under the root DPRC container. Treat this case also, otherwise it would lead to a NULL pointer when trying to access the peer fsl_mc_device.

Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by: Ioana Ciornei ioana.ciornei@nxp.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index 569e06d2bab21..72fa9c4e058f7 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -3383,7 +3383,7 @@ static int dpaa2_eth_connect_mac(struct dpaa2_eth_priv *priv)

dpni_dev = to_fsl_mc_device(priv->net_dev->dev.parent); dpmac_dev = fsl_mc_get_endpoint(dpni_dev); - if (IS_ERR(dpmac_dev) || dpmac_dev->dev.type != &fsl_mc_bus_dpmac_type) + if (IS_ERR_OR_NULL(dpmac_dev) || dpmac_dev->dev.type != &fsl_mc_bus_dpmac_type) return 0;

if (dpaa2_mac_is_type_fixed(dpmac_dev, priv->mc_io))

From: George Kennedy george.kennedy@oracle.com

[ Upstream commit c28d9a285668c799eeae2f7f93e929a6028a4d6d ]

If ax88172a_unbind() fails, make sure that the return code is less than zero so that cleanup is done properly and avoid UAF.

Fixes: a9a51bd727d1 ("ax88172a: fix information leak on short answers") Signed-off-by: George Kennedy george.kennedy@oracle.com Reported-by: syzbot+4cd84f527bf4a10fc9c1@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/ax88172a.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c index 4e514f5d7c6c7..fd3a04d98dc14 100644 --- a/drivers/net/usb/ax88172a.c +++ b/drivers/net/usb/ax88172a.c @@ -187,6 +187,7 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf) ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0); if (ret < ETH_ALEN) { netdev_err(dev->net, "Failed to read MAC address: %d\n", ret); + ret = -EIO; goto free; } memcpy(dev->net->dev_addr, buf, ETH_ALEN);

From: Leon Romanovsky leonro@mellanox.com

[ Upstream commit 0d1fd39bb27e479fb1de3dd4b4c247c7c9a1fabf ]

The FD should not be installed until all of the setup is completed as the fd_install() transfers ownership of the kref to the FD table. A thread can race a close() and trigger concurrent rdma_alloc_commit_uobject() and uverbs_uobject_fd_release() which, at least, triggers a safety WARN_ON:

WARNING: CPU: 4 PID: 6913 at drivers/infiniband/core/rdma_core.c:768 uverbs_uobject_fd_release+0x202/0x230 Kernel panic - not syncing: panic_on_warn set ... CPU: 4 PID: 6913 Comm: syz-executor.3 Not tainted 5.7.0-rc2 #22 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [..] RIP: 0010:uverbs_uobject_fd_release+0x202/0x230 Code: fe 4c 89 e7 e8 af 23 fe ff e9 2a ff ff ff e8 c5 fa 61 fe be 03 00 00 00 4c 89 e7 e8 68 eb f5 fe e9 13 ff ff ff e8 ae fa 61 fe <0f> 0b eb ac e8 e5 aa 3c fe e8 50 2b 86 fe e9 6a fe ff ff e8 46 2b RSP: 0018:ffffc90008117d88 EFLAGS: 00010293 RAX: ffff88810e146580 RBX: 1ffff92001022fb1 RCX: ffffffff82d5b902 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88811951b040 RBP: ffff88811951b000 R08: ffffed10232a3609 R09: ffffed10232a3609 R10: ffff88811951b043 R11: 0000000000000001 R12: ffff888100a7c600 R13: ffff888100a7c650 R14: ffffc90008117da8 R15: ffffffff82d5b700 ? __uverbs_cleanup_ufile+0x270/0x270 ? uverbs_uobject_fd_release+0x202/0x230 ? uverbs_uobject_fd_release+0x202/0x230 ? __uverbs_cleanup_ufile+0x270/0x270 ? locks_remove_file+0x282/0x3d0 ? security_file_free+0xaa/0xd0 __fput+0x2be/0x770 task_work_run+0x10e/0x1b0 exit_to_usermode_loop+0x145/0x170 do_syscall_64+0x2d0/0x390 ? prepare_exit_to_usermode+0x17a/0x230 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x414da7 Code: 00 00 0f 05 48 3d 00 f0 ff ff 77 3f f3 c3 0f 1f 44 00 00 53 89 fb 48 83 ec 10 e8 f4 fb ff ff 89 df 89 c2 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2b 89 d7 89 44 24 0c e8 36 fc ff ff 8b 44 24 RSP: 002b:00007fff39d379d0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000414da7 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000003 RBP: 00007fff39d37a3c R08: 0000000400000000 R09: 0000000400000000 R10: 00007fff39d37910 R11: 0000000000000293 R12: 0000000000000001 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000003

Reorder so that fd_install() is the last thing done in rdma_alloc_commit_uobject().

Fixes: aba94548c9e4 ("IB/uverbs: Move the FD uobj type struct file allocation to alloc_commit") Link: https://lore.kernel.org/r/20200716102059.1420681-1-leon@kernel.org Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/core/rdma_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/core/rdma_core.c b/drivers/infiniband/core/rdma_core.c index 75bcbc625616e..3ab84fcbaadec 100644 --- a/drivers/infiniband/core/rdma_core.c +++ b/drivers/infiniband/core/rdma_core.c @@ -638,9 +638,6 @@ void rdma_alloc_commit_uobject(struct ib_uobject *uobj, { struct ib_uverbs_file *ufile = attrs->ufile;

- /* alloc_commit consumes the uobj kref */ - uobj->uapi_object->type_class->alloc_commit(uobj); - /* kref is held so long as the uobj is on the uobj list. */ uverbs_uobject_get(uobj); spin_lock_irq(&ufile->uobjects_lock); @@ -650,6 +647,9 @@ void rdma_alloc_commit_uobject(struct ib_uobject *uobj, /* matches atomic_set(-1) in alloc_uobj */ atomic_set(&uobj->usecnt, 0);

+ /* alloc_commit consumes the uobj kref */ + uobj->uapi_object->type_class->alloc_commit(uobj); + /* Matches the down_read in rdma_alloc_begin_uobject */ up_read(&ufile->hw_destroy_rwsem); }

From: Sergey Organov sorganov@gmail.com

[ Upstream commit 340746398b67e3ce5019698748ebaa7adf048114 ]

Fix support for external PTP-aware devices such as DSA or PTP PHY:

Make sure we never time stamp tx packets when hardware time stamping is disabled.

Check for PTP PHY being in use and then pass ioctls related to time stamping of Ethernet packets to the PTP PHY rather than handle them ourselves. In addition, disable our own hardware time stamping in this case.

Fixes: 6605b730c061 ("FEC: Add time stamping code and a PTP hardware clock") Signed-off-by: Sergey Organov sorganov@gmail.com Acked-by: Richard Cochran richardcochran@gmail.com Acked-by: Vladimir Oltean olteanv@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/fec.h | 1 + drivers/net/ethernet/freescale/fec_main.c | 23 +++++++++++++++++------ drivers/net/ethernet/freescale/fec_ptp.c | 12 ++++++++++++ 3 files changed, 30 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index e74dd1f86bbae..828eb8ce6631c 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -597,6 +597,7 @@ struct fec_enet_private { void fec_ptp_init(struct platform_device *pdev, int irq_idx); void fec_ptp_stop(struct platform_device *pdev); void fec_ptp_start_cyclecounter(struct net_device *ndev); +void fec_ptp_disable_hwts(struct net_device *ndev); int fec_ptp_set(struct net_device *ndev, struct ifreq *ifr); int fec_ptp_get(struct net_device *ndev, struct ifreq *ifr);

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index dc6f8763a5d40..bf73bc9bf35b9 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -1302,8 +1302,13 @@ fec_enet_tx_queue(struct net_device *ndev, u16 queue_id) ndev->stats.tx_bytes += skb->len; }

- if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS) && - fep->bufdesc_ex) { + /* NOTE: SKBTX_IN_PROGRESS being set does not imply it's we who + * are to time stamp the packet, so we still need to check time + * stamping enabled flag. + */ + if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS && + fep->hwts_tx_en) && + fep->bufdesc_ex) { struct skb_shared_hwtstamps shhwtstamps; struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp;

@@ -2731,10 +2736,16 @@ static int fec_enet_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) return -ENODEV;

if (fep->bufdesc_ex) { - if (cmd == SIOCSHWTSTAMP) - return fec_ptp_set(ndev, rq); - if (cmd == SIOCGHWTSTAMP) - return fec_ptp_get(ndev, rq); + bool use_fec_hwts = !phy_has_hwtstamp(phydev); + + if (cmd == SIOCSHWTSTAMP) { + if (use_fec_hwts) + return fec_ptp_set(ndev, rq); + fec_ptp_disable_hwts(ndev); + } else if (cmd == SIOCGHWTSTAMP) { + if (use_fec_hwts) + return fec_ptp_get(ndev, rq); + } }

return phy_mii_ioctl(phydev, rq, cmd); diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c index 945643c026155..f8a592c96beb0 100644 --- a/drivers/net/ethernet/freescale/fec_ptp.c +++ b/drivers/net/ethernet/freescale/fec_ptp.c @@ -452,6 +452,18 @@ static int fec_ptp_enable(struct ptp_clock_info *ptp, return -EOPNOTSUPP; }

+/** + * fec_ptp_disable_hwts - disable hardware time stamping + * @ndev: pointer to net_device + */ +void fec_ptp_disable_hwts(struct net_device *ndev) +{ + struct fec_enet_private *fep = netdev_priv(ndev); + + fep->hwts_tx_en = 0; + fep->hwts_rx_en = 0; +} + int fec_ptp_set(struct net_device *ndev, struct ifreq *ifr) { struct fec_enet_private *fep = netdev_priv(ndev);

From: Sergey Organov sorganov@gmail.com

[ Upstream commit 473309fb8372365ad211f425bca760af800e10a7 ]

From Documentation/networking/timestamping.txt:

A driver which supports hardware time stamping shall update the struct with the actual, possibly more permissive configuration.

Do update the struct passed when we upscale the requested time stamping mode.

Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by: Sergey Organov sorganov@gmail.com Acked-by: Richard Cochran richardcochran@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/dp83640.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index ecbd5e0d685cf..acb0aae607558 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -1260,6 +1260,7 @@ static int dp83640_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr) dp83640->hwts_rx_en = 1; dp83640->layer = PTP_CLASS_L4; dp83640->version = PTP_CLASS_V1; + cfg.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; break; case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: @@ -1267,6 +1268,7 @@ static int dp83640_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr) dp83640->hwts_rx_en = 1; dp83640->layer = PTP_CLASS_L4; dp83640->version = PTP_CLASS_V2; + cfg.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT; break; case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: @@ -1274,6 +1276,7 @@ static int dp83640_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr) dp83640->hwts_rx_en = 1; dp83640->layer = PTP_CLASS_L2; dp83640->version = PTP_CLASS_V2; + cfg.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; break; case HWTSTAMP_FILTER_PTP_V2_EVENT: case HWTSTAMP_FILTER_PTP_V2_SYNC: @@ -1281,6 +1284,7 @@ static int dp83640_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr) dp83640->hwts_rx_en = 1; dp83640->layer = PTP_CLASS_L4 | PTP_CLASS_L2; dp83640->version = PTP_CLASS_V2; + cfg.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; break; default: return -ERANGE;

From: Chen-Yu Tsai wens@csie.org

[ Upstream commit baa1841eb797eadce6c907bdaed7cd6f01815404 ]

When the extra HPD polling in sun4i_hdmi was removed, the result of HPD was accidentally inverted.

Fix this by inverting the check.

Fixes: bda8eaa6dee7 ("drm: sun4i: hdmi: Remove extra HPD polling") Signed-off-by: Chen-Yu Tsai wens@csie.org Tested-by: Mans Rullgard mans@mansr.com Signed-off-by: Maxime Ripard maxime@cerno.tech Link: https://patchwork.freedesktop.org/patch/msgid/20200711011030.21997-1-wens@ke... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c index f07e0c32b93a2..4c5072a578bf2 100644 --- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c @@ -263,7 +263,7 @@ sun4i_hdmi_connector_detect(struct drm_connector *connector, bool force) unsigned long reg;

reg = readl(hdmi->base + SUN4I_HDMI_HPD_REG); - if (reg & SUN4I_HDMI_HPD_HIGH) { + if (!(reg & SUN4I_HDMI_HPD_HIGH)) { cec_phys_addr_invalidate(hdmi->cec_adap); return connector_status_disconnected; }

From: Vadim Pasternak vadimp@mellanox.com

[ Upstream commit 9b8737788af6c76ef93e3161ee2cdc4ddcc034ca ]

Fix wrong reading of upper pages for SFP EEPROM. According to "Memory Organization" figure in SFF-8472 spec: When reading upper pages 1, 2 and 3 the offset should be set relative to zero and I2C high address 0x51 [1010001X (A2h)] is to be used.

Fixes: a45bfb5a5070 ("mlxsw: core: Extend QSFP EEPROM size for ethtool") Signed-off-by: Vadim Pasternak vadimp@mellanox.com Reviewed-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/mellanox/mlxsw/core_env.c | 48 ++++++++++++------- 1 file changed, 32 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_env.c b/drivers/net/ethernet/mellanox/mlxsw/core_env.c index 08215fed193d3..a7d86df7123ff 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core_env.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core_env.c @@ -45,7 +45,7 @@ static int mlxsw_env_validate_cable_ident(struct mlxsw_core *core, int id, static int mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core, int module, u16 offset, u16 size, void *data, - unsigned int *p_read_size) + bool qsfp, unsigned int *p_read_size) { char eeprom_tmp[MLXSW_REG_MCIA_EEPROM_SIZE]; char mcia_pl[MLXSW_REG_MCIA_LEN]; @@ -54,6 +54,10 @@ mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core, int module, int status; int err;

+ /* MCIA register accepts buffer size <= 48. Page of size 128 should be + * read by chunks of size 48, 48, 32. Align the size of the last chunk + * to avoid reading after the end of the page. + */ size = min_t(u16, size, MLXSW_REG_MCIA_EEPROM_SIZE);

if (offset < MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH && @@ -63,18 +67,25 @@ mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core, int module,

i2c_addr = MLXSW_REG_MCIA_I2C_ADDR_LOW; if (offset >= MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) { - page = MLXSW_REG_MCIA_PAGE_GET(offset); - offset -= MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH * page; - /* When reading upper pages 1, 2 and 3 the offset starts at - * 128. Please refer to "QSFP+ Memory Map" figure in SFF-8436 - * specification for graphical depiction. - * MCIA register accepts buffer size <= 48. Page of size 128 - * should be read by chunks of size 48, 48, 32. Align the size - * of the last chunk to avoid reading after the end of the - * page. - */ - if (offset + size > MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) - size = MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH - offset; + if (qsfp) { + /* When reading upper pages 1, 2 and 3 the offset + * starts at 128. Please refer to "QSFP+ Memory Map" + * figure in SFF-8436 specification for graphical + * depiction. + */ + page = MLXSW_REG_MCIA_PAGE_GET(offset); + offset -= MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH * page; + if (offset + size > MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) + size = MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH - offset; + } else { + /* When reading upper pages 1, 2 and 3 the offset + * starts at 0 and I2C high address is used. Please refer + * refer to "Memory Organization" figure in SFF-8472 + * specification for graphical depiction. + */ + i2c_addr = MLXSW_REG_MCIA_I2C_ADDR_HIGH; + offset -= MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH; + } }

mlxsw_reg_mcia_pack(mcia_pl, module, 0, page, offset, size, i2c_addr); @@ -166,7 +177,7 @@ int mlxsw_env_get_module_info(struct mlxsw_core *mlxsw_core, int module, int err;

err = mlxsw_env_query_module_eeprom(mlxsw_core, module, 0, offset, - module_info, &read_size); + module_info, false, &read_size); if (err) return err;

@@ -197,7 +208,7 @@ int mlxsw_env_get_module_info(struct mlxsw_core *mlxsw_core, int module, /* Verify if transceiver provides diagnostic monitoring page */ err = mlxsw_env_query_module_eeprom(mlxsw_core, module, SFP_DIAGMON, 1, &diag_mon, - &read_size); + false, &read_size); if (err) return err;

@@ -225,17 +236,22 @@ int mlxsw_env_get_module_eeprom(struct net_device *netdev, int offset = ee->offset; unsigned int read_size; int i = 0; + bool qsfp; int err;

if (!ee->len) return -EINVAL;

memset(data, 0, ee->len); + /* Validate module identifier value. */ + err = mlxsw_env_validate_cable_ident(mlxsw_core, module, &qsfp); + if (err) + return err;

while (i < ee->len) { err = mlxsw_env_query_module_eeprom(mlxsw_core, module, offset, ee->len - i, data + i, - &read_size); + qsfp, &read_size); if (err) { netdev_err(netdev, "Eeprom query failed\n"); return err;

From: Russell King rmk+kernel@armlinux.org.uk

[ Upstream commit 7c6719a1aaca51ffd7cdf3905e70aa8313f6ef26 ]

The commit below caused a regression for clearfog-gt-8k, where the link between the switch and the host does not come up.

Investigation revealed two issues: - MV88E6xxx DSA no longer allows an in-band link to come up as the link is programmed to be forced down. Commit "net: dsa: mv88e6xxx: fix in-band AN link establishment" addresses this.

- The dts configured dissimilar link modes at each end of the host to switch link; the host was configured using a fixed link (so has no in-band status) and the switch was configured to expect in-band status.

With both issues fixed, the regression is resolved.

Fixes: 34b5e6a33c1a ("net: dsa: mv88e6xxx: Configure MAC when using fixed link") Reported-by: Martin Rowe martin.p.rowe@gmail.com Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index b90d78a5724b2..e32a491e909f1 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -454,10 +454,7 @@ status = "okay"; phy-mode = "2500base-x"; phys = <&cp1_comphy5 2>; - fixed-link { - speed = <2500>; - full-duplex; - }; + managed = "in-band-status"; };

&cp1_spi1 {

From: Alessio Bonfiglio alessio.bonfiglio@mail.polimi.it

[ Upstream commit b5ba46b81c2fef00bcf110777fb6d51befa4a23e ]

Fix the regression introduced by commit c8685937d07f ("iwlwifi: move pu devices to new table") by adding the ids and the configurations of two missing Killer 1550 cards in order to configure and let them work correctly again (following the new table convention). Resolve bug 208141 ("Wireless ac 9560 not working kernel 5.7.2", https://bugzilla.kernel.org/show_bug.cgi?id=208141).

Fixes: c8685937d07f ("iwlwifi: move pu devices to new table") Signed-off-by: Alessio Bonfiglio alessio.bonfiglio@mail.polimi.it Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20200714091911.4442-1-alessio.bonfiglio@mail.polim... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index 29971c25dba44..9ea3e56346722 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -577,6 +577,8 @@ static const struct iwl_dev_info iwl_dev_info_table[] = { IWL_DEV_INFO(0x30DC, 0x1552, iwl9560_2ac_cfg_soc, iwl9560_killer_1550i_name), IWL_DEV_INFO(0x31DC, 0x1551, iwl9560_2ac_cfg_soc, iwl9560_killer_1550s_name), IWL_DEV_INFO(0x31DC, 0x1552, iwl9560_2ac_cfg_soc, iwl9560_killer_1550i_name), + IWL_DEV_INFO(0xA370, 0x1551, iwl9560_2ac_cfg_soc, iwl9560_killer_1550s_name), + IWL_DEV_INFO(0xA370, 0x1552, iwl9560_2ac_cfg_soc, iwl9560_killer_1550i_name),

IWL_DEV_INFO(0x271C, 0x0214, iwl9260_2ac_cfg, iwl9260_1_name),

From: Liu Jian liujian56@huawei.com

[ Upstream commit 6790711f8ac5faabc43237c0d05d93db431a1ecc ]

When dma_coerce_mask_and_coherent() fails, the alloced netdev need to be freed.

Fixes: 060ad66f9795 ("dpaa_eth: change DMA device") Signed-off-by: Liu Jian liujian56@huawei.com Acked-by: Madalin Bucur madalin.bucur@oss.nxp.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c index 6bfa7575af942..5f82c1f32f09b 100644 --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c @@ -2938,7 +2938,7 @@ static int dpaa_eth_probe(struct platform_device *pdev) DMA_BIT_MASK(40)); if (err) { netdev_err(net_dev, "dma_coerce_mask_and_coherent() failed\n"); - return err; + goto free_netdev; }

/* If fsl_fm_max_frm is set to a higher value than the all-common 1500,

From: Shannon Nelson snelson@pensando.io

[ Upstream commit f85ae16f924f92a370b81b4e77862c1c59882fce ]

Use an offset to write the second half of the regs data into the second half of the buffer instead of overwriting the first half.

Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support") Signed-off-by: Shannon Nelson snelson@pensando.io Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/pensando/ionic/ionic_ethtool.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c b/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c index 22430fa911e2c..63d78519cbc6f 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c @@ -102,15 +102,18 @@ static void ionic_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *p) { struct ionic_lif *lif = netdev_priv(netdev); + unsigned int offset; unsigned int size;

regs->version = IONIC_DEV_CMD_REG_VERSION;

+ offset = 0; size = IONIC_DEV_INFO_REG_COUNT * sizeof(u32); - memcpy_fromio(p, lif->ionic->idev.dev_info_regs->words, size); + memcpy_fromio(p + offset, lif->ionic->idev.dev_info_regs->words, size);

+ offset += size; size = IONIC_DEV_CMD_REG_COUNT * sizeof(u32); - memcpy_fromio(p, lif->ionic->idev.dev_cmd_regs->words, size); + memcpy_fromio(p + offset, lif->ionic->idev.dev_cmd_regs->words, size); }

static int ionic_get_link_ksettings(struct net_device *netdev,

From: Shannon Nelson snelson@pensando.io

[ Upstream commit cc4428c4de8c31f12e4690d0409e0432fe05702f ]

When we replay the rx filters after a fw-upgrade we get new filter_id values from the FW, which we need to save and update in our local filter list. This allows us to delete the filters with the correct filter_id when we're done.

Fixes: 7e4d47596b68 ("ionic: replay filters after fw upgrade") Signed-off-by: Shannon Nelson snelson@pensando.io Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../ethernet/pensando/ionic/ionic_rx_filter.c | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)

diff --git a/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c b/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c index fb9d828812bd2..cd0076fc3044e 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c @@ -21,13 +21,16 @@ void ionic_rx_filter_free(struct ionic_lif *lif, struct ionic_rx_filter *f) void ionic_rx_filter_replay(struct ionic_lif *lif) { struct ionic_rx_filter_add_cmd *ac; + struct hlist_head new_id_list; struct ionic_admin_ctx ctx; struct ionic_rx_filter *f; struct hlist_head *head; struct hlist_node *tmp; + unsigned int key; unsigned int i; int err;

+ INIT_HLIST_HEAD(&new_id_list); ac = &ctx.cmd.rx_filter_add;

for (i = 0; i < IONIC_RX_FILTER_HLISTS; i++) { @@ -58,9 +61,30 @@ void ionic_rx_filter_replay(struct ionic_lif *lif) ac->mac.addr); break; } + spin_lock_bh(&lif->rx_filters.lock); + ionic_rx_filter_free(lif, f); + spin_unlock_bh(&lif->rx_filters.lock); + + continue; } + + /* remove from old id list, save new id in tmp list */ + spin_lock_bh(&lif->rx_filters.lock); + hlist_del(&f->by_id); + spin_unlock_bh(&lif->rx_filters.lock); + f->filter_id = le32_to_cpu(ctx.comp.rx_filter_add.filter_id); + hlist_add_head(&f->by_id, &new_id_list); } } + + /* rebuild the by_id hash lists with the new filter ids */ + spin_lock_bh(&lif->rx_filters.lock); + hlist_for_each_entry_safe(f, tmp, &new_id_list, by_id) { + key = f->filter_id & IONIC_RX_FILTER_HLISTS_MASK; + head = &lif->rx_filters.by_id[key]; + hlist_add_head(&f->by_id, head); + } + spin_unlock_bh(&lif->rx_filters.lock); }

int ionic_rx_filters_init(struct ionic_lif *lif)

From: Shannon Nelson snelson@pensando.io

[ Upstream commit 0925e9db4dc86daf666d9a3d53c7db14ac6d5d00 ]

The ionic_wait_on_bit_lock() was a open-coded mutex knock-off used only for protecting the queue reset operations, and there was no reason not to use the real thing. We can use the lock more correctly and to better protect the queue stop and start operations from cross threading. We can also remove a useless and expensive bit operation from the Rx path.

This fixes a case found where the link_status_check from a link flap could run into an MTU change and cause a crash.

Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Shannon Nelson snelson@pensando.io Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/pensando/ionic/ionic_lif.c | 28 +++++++++++-------- .../net/ethernet/pensando/ionic/ionic_lif.h | 8 +----- .../net/ethernet/pensando/ionic/ionic_txrx.c | 6 ---- 3 files changed, 17 insertions(+), 25 deletions(-)

diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index 08ab6dafc66c5..2c3e9ef22129c 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -85,8 +85,7 @@ static void ionic_link_status_check(struct ionic_lif *lif) u16 link_status; bool link_up;

- if (!test_bit(IONIC_LIF_F_LINK_CHECK_REQUESTED, lif->state) || - test_bit(IONIC_LIF_F_QUEUE_RESET, lif->state)) + if (!test_bit(IONIC_LIF_F_LINK_CHECK_REQUESTED, lif->state)) return;

if (lif->ionic->is_mgmt_nic) @@ -106,16 +105,22 @@ static void ionic_link_status_check(struct ionic_lif *lif) netif_carrier_on(netdev); }

- if (lif->netdev->flags & IFF_UP && netif_running(lif->netdev)) + if (lif->netdev->flags & IFF_UP && netif_running(lif->netdev)) { + mutex_lock(&lif->queue_lock); ionic_start_queues(lif); + mutex_unlock(&lif->queue_lock); + } } else { if (netif_carrier_ok(netdev)) { netdev_info(netdev, "Link down\n"); netif_carrier_off(netdev); }

- if (lif->netdev->flags & IFF_UP && netif_running(lif->netdev)) + if (lif->netdev->flags & IFF_UP && netif_running(lif->netdev)) { + mutex_lock(&lif->queue_lock); ionic_stop_queues(lif); + mutex_unlock(&lif->queue_lock); + } }

clear_bit(IONIC_LIF_F_LINK_CHECK_REQUESTED, lif->state); @@ -1948,16 +1953,13 @@ int ionic_reset_queues(struct ionic_lif *lif, ionic_reset_cb cb, void *arg) bool running; int err = 0;

- err = ionic_wait_for_bit(lif, IONIC_LIF_F_QUEUE_RESET); - if (err) - return err; - + mutex_lock(&lif->queue_lock); running = netif_running(lif->netdev); if (running) { netif_device_detach(lif->netdev); err = ionic_stop(lif->netdev); if (err) - goto reset_out; + return err; }

if (cb) @@ -1967,9 +1969,7 @@ int ionic_reset_queues(struct ionic_lif *lif, ionic_reset_cb cb, void *arg) err = ionic_open(lif->netdev); netif_device_attach(lif->netdev); } - -reset_out: - clear_bit(IONIC_LIF_F_QUEUE_RESET, lif->state); + mutex_unlock(&lif->queue_lock);

return err; } @@ -2108,7 +2108,9 @@ static void ionic_lif_handle_fw_down(struct ionic_lif *lif)

if (test_bit(IONIC_LIF_F_UP, lif->state)) { dev_info(ionic->dev, "Surprise FW stop, stopping queues\n"); + mutex_lock(&lif->queue_lock); ionic_stop_queues(lif); + mutex_unlock(&lif->queue_lock); }

if (netif_running(lif->netdev)) { @@ -2235,6 +2237,7 @@ static void ionic_lif_deinit(struct ionic_lif *lif) ionic_lif_qcq_deinit(lif, lif->notifyqcq); ionic_lif_qcq_deinit(lif, lif->adminqcq);

+ mutex_destroy(&lif->queue_lock); ionic_lif_reset(lif); }

@@ -2410,6 +2413,7 @@ static int ionic_lif_init(struct ionic_lif *lif) return err;

lif->hw_index = le16_to_cpu(comp.hw_index); + mutex_init(&lif->queue_lock);

/* now that we have the hw_index we can figure out our doorbell page */ lif->dbid_count = le32_to_cpu(lif->ionic->ident.dev.ndbpgs_per_lif); diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.h b/drivers/net/ethernet/pensando/ionic/ionic_lif.h index 2c65cf6300dbd..90992614f136e 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.h +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.h @@ -126,7 +126,6 @@ enum ionic_lif_state_flags { IONIC_LIF_F_SW_DEBUG_STATS, IONIC_LIF_F_UP, IONIC_LIF_F_LINK_CHECK_REQUESTED, - IONIC_LIF_F_QUEUE_RESET, IONIC_LIF_F_FW_RESET,

/* leave this as last */ @@ -145,6 +144,7 @@ struct ionic_lif { unsigned int hw_index; unsigned int kern_pid; u64 __iomem *kern_dbpage; + struct mutex queue_lock; /* lock for queue structures */ spinlock_t adminq_lock; /* lock for AdminQ operations */ struct ionic_qcq *adminqcq; struct ionic_qcq *notifyqcq; @@ -191,12 +191,6 @@ struct ionic_lif { #define lif_to_txq(lif, i) (&lif_to_txqcq((lif), i)->q) #define lif_to_rxq(lif, i) (&lif_to_txqcq((lif), i)->q)

-/* return 0 if successfully set the bit, else non-zero */ -static inline int ionic_wait_for_bit(struct ionic_lif *lif, int bitname) -{ - return wait_on_bit_lock(lif->state, bitname, TASK_INTERRUPTIBLE); -} - static inline u32 ionic_coal_usec_to_hw(struct ionic *ionic, u32 usecs) { u32 mult = le32_to_cpu(ionic->ident.dev.intr_coal_mult); diff --git a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c index d233b6e77b1ee..ce8e246cda07d 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c @@ -157,12 +157,6 @@ static void ionic_rx_clean(struct ionic_queue *q, struct ionic_desc_info *desc_i return; }

- /* no packet processing while resetting */ - if (unlikely(test_bit(IONIC_LIF_F_QUEUE_RESET, q->lif->state))) { - stats->dropped++; - return; - } - stats->pkts++; stats->bytes += le16_to_cpu(comp->len);

From: Huang Guobin huangguobin4@huawei.com

[ Upstream commit befc113c56a76ae7be3986034a0e476d3385e265 ]

The ag71xx_mdio_probe() forgets to call clk_disable_unprepare() when of_reset_control_get_exclusive() failed. Add the missed call to fix it.

Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Huang Guobin huangguobin4@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/atheros/ag71xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/atheros/ag71xx.c b/drivers/net/ethernet/atheros/ag71xx.c index 02b7705393ca7..37a1cf63d9f7b 100644 --- a/drivers/net/ethernet/atheros/ag71xx.c +++ b/drivers/net/ethernet/atheros/ag71xx.c @@ -556,7 +556,8 @@ static int ag71xx_mdio_probe(struct ag71xx *ag) ag->mdio_reset = of_reset_control_get_exclusive(np, "mdio"); if (IS_ERR(ag->mdio_reset)) { netif_err(ag, probe, ndev, "Failed to get reset mdio.\n"); - return PTR_ERR(ag->mdio_reset); + err = PTR_ERR(ag->mdio_reset); + goto mdio_err_put_clk; }

mii_bus->name = "ag71xx_mdio";

From: Yunsheng Lin linyunsheng@huawei.com

[ Upstream commit 48ae74c9d89f827b39b5c07a1f02fc13637a3cd6 ]

With GRO and fraglist support, the SKB can be aggregated to a total size of 65535, and when that SKB is forwarded through a bridge, the size of the SKB may be pushed to exceed the size of 65535 when br_dev_queue_push_xmit() is called.

The max send size of BD supported by the HW is 65535, when a SKB with a headlen of over 65535 is sent to the driver, the driver needs to use multi BD to send the linear data, and the send size of the last BD is calculated incorrectly by the driver who is using '&' operation, which causes a TX error.

Use '%' operation to fix this problem.

Fixes: 3fe13ed95dd3 ("net: hns3: avoid mult + div op in critical data path") Signed-off-by: Yunsheng Lin linyunsheng@huawei.com Signed-off-by: Huazhong Tan tanhuazhong@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 3003eecd5263b..5dab84aa3afd5 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -1140,7 +1140,7 @@ static int hns3_fill_desc(struct hns3_enet_ring *ring, void *priv, }

frag_buf_num = hns3_tx_bd_count(size); - sizeoflast = size & HNS3_TX_LAST_SIZE_M; + sizeoflast = size % HNS3_MAX_BD_SIZE; sizeoflast = sizeoflast ? sizeoflast : HNS3_MAX_BD_SIZE;

/* When frag size is bigger than hardware limit, split this frag */ diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h index abefd7a179f7b..e6b29a35cdb24 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h @@ -186,8 +186,6 @@ enum hns3_nic_state { #define HNS3_TXD_MSS_S 0 #define HNS3_TXD_MSS_M (0x3fff << HNS3_TXD_MSS_S)

-#define HNS3_TX_LAST_SIZE_M 0xffff - #define HNS3_VECTOR_TX_IRQ BIT_ULL(0) #define HNS3_VECTOR_RX_IRQ BIT_ULL(1)

From: Jian Shen shenjian15@huawei.com

[ Upstream commit fac24df7b9a6d9363abdff0e351ade041dd16daa ]

Currently, PF queries the MAC link status per second by calling function hclge_get_mac_link_status(). It return the error code when failed to send cmdq command to firmware. It's incorrect, because this return value is used as the MAC link status, which 0 means link down, and none-zero means link up. So fixes it.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen shenjian15@huawei.com Signed-off-by: Huazhong tan tanhuazhong@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../hisilicon/hns3/hns3pf/hclge_main.c | 49 +++++++++---------- .../hisilicon/hns3/hns3pf/hclge_main.h | 3 ++ 2 files changed, 25 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 4de268a879582..b66b93f320b42 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -2680,11 +2680,10 @@ void hclge_task_schedule(struct hclge_dev *hdev, unsigned long delay_time) delay_time); }

-static int hclge_get_mac_link_status(struct hclge_dev *hdev) +static int hclge_get_mac_link_status(struct hclge_dev *hdev, int *link_status) { struct hclge_link_status_cmd *req; struct hclge_desc desc; - int link_status; int ret;

hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_QUERY_LINK_STATUS, true); @@ -2696,33 +2695,25 @@ static int hclge_get_mac_link_status(struct hclge_dev *hdev) }

req = (struct hclge_link_status_cmd *)desc.data; - link_status = req->status & HCLGE_LINK_STATUS_UP_M; + *link_status = (req->status & HCLGE_LINK_STATUS_UP_M) > 0 ? + HCLGE_LINK_STATUS_UP : HCLGE_LINK_STATUS_DOWN;

- return !!link_status; + return 0; }

-static int hclge_get_mac_phy_link(struct hclge_dev *hdev) +static int hclge_get_mac_phy_link(struct hclge_dev *hdev, int *link_status) { - unsigned int mac_state; - int link_stat; + struct phy_device *phydev = hdev->hw.mac.phydev; + + *link_status = HCLGE_LINK_STATUS_DOWN;

if (test_bit(HCLGE_STATE_DOWN, &hdev->state)) return 0;

- mac_state = hclge_get_mac_link_status(hdev); - - if (hdev->hw.mac.phydev) { - if (hdev->hw.mac.phydev->state == PHY_RUNNING) - link_stat = mac_state & - hdev->hw.mac.phydev->link; - else - link_stat = 0; - - } else { - link_stat = mac_state; - } + if (phydev && (phydev->state != PHY_RUNNING || !phydev->link)) + return 0;

- return !!link_stat; + return hclge_get_mac_link_status(hdev, link_status); }

static void hclge_update_link_status(struct hclge_dev *hdev) @@ -2732,6 +2723,7 @@ static void hclge_update_link_status(struct hclge_dev *hdev) struct hnae3_handle *rhandle; struct hnae3_handle *handle; int state; + int ret; int i;

if (!client) @@ -2740,7 +2732,12 @@ static void hclge_update_link_status(struct hclge_dev *hdev) if (test_and_set_bit(HCLGE_STATE_LINK_UPDATING, &hdev->state)) return;

- state = hclge_get_mac_phy_link(hdev); + ret = hclge_get_mac_phy_link(hdev, &state); + if (ret) { + clear_bit(HCLGE_STATE_LINK_UPDATING, &hdev->state); + return; + } + if (state != hdev->hw.mac.link) { for (i = 0; i < hdev->num_vmdq_vport + 1; i++) { handle = &hdev->vport[i].nic; @@ -6435,14 +6432,15 @@ static int hclge_mac_link_status_wait(struct hclge_dev *hdev, int link_ret) { #define HCLGE_MAC_LINK_STATUS_NUM 100

+ int link_status; int i = 0; int ret;

do { - ret = hclge_get_mac_link_status(hdev); - if (ret < 0) + ret = hclge_get_mac_link_status(hdev, &link_status); + if (ret) return ret; - else if (ret == link_ret) + if (link_status == link_ret) return 0;

msleep(HCLGE_LINK_STATUS_MS); @@ -6453,9 +6451,6 @@ static int hclge_mac_link_status_wait(struct hclge_dev *hdev, int link_ret) static int hclge_mac_phy_link_status_wait(struct hclge_dev *hdev, bool en, bool is_phy) { -#define HCLGE_LINK_STATUS_DOWN 0 -#define HCLGE_LINK_STATUS_UP 1 - int link_ret;

link_ret = en ? HCLGE_LINK_STATUS_UP : HCLGE_LINK_STATUS_DOWN; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h index 71df23d5f1b4d..8784168f8f6f7 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h @@ -316,6 +316,9 @@ enum hclge_link_fail_code { HCLGE_LF_XSFP_ABSENT, };

+#define HCLGE_LINK_STATUS_DOWN 0 +#define HCLGE_LINK_STATUS_UP 1 + #define HCLGE_PG_NUM 4 #define HCLGE_SCH_MODE_SP 0 #define HCLGE_SCH_MODE_DWRR 1

From: Taehee Yoo ap420073@gmail.com

[ Upstream commit 2c9d8e01f0c6017317eee7638496173d4a64e6bc ]

In the nsim_create(), rtnl_lock() is called before nsim_bpf_init(). If nsim_bpf_init() is failed, rtnl_unlock() should be called, but it isn't called. So, unbalanced locking would occur.

Fixes: e05b2d141fef ("netdevsim: move netdev creation/destruction to dev probe") Signed-off-by: Taehee Yoo ap420073@gmail.com Reviewed-by: Jakub Kicinski kuba@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/netdevsim/netdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/netdevsim/netdev.c b/drivers/net/netdevsim/netdev.c index 2908e0a0d6e19..23950e7a0f81e 100644 --- a/drivers/net/netdevsim/netdev.c +++ b/drivers/net/netdevsim/netdev.c @@ -302,7 +302,7 @@ nsim_create(struct nsim_dev *nsim_dev, struct nsim_dev_port *nsim_dev_port) rtnl_lock(); err = nsim_bpf_init(ns); if (err) - goto err_free_netdev; + goto err_rtnl_unlock;

nsim_ipsec_init(ns);

@@ -316,8 +316,8 @@ nsim_create(struct nsim_dev *nsim_dev, struct nsim_dev_port *nsim_dev_port) err_ipsec_teardown: nsim_ipsec_teardown(ns); nsim_bpf_uninit(ns); +err_rtnl_unlock: rtnl_unlock(); -err_free_netdev: free_netdev(dev); return ERR_PTR(err); }

From: Alexander Lobakin alobakin@marvell.com

[ Upstream commit eb61c2d69903e977ffa2b80b1da9d1f758cf228d ]

It was found that qed_pglueb_rbc_attn_handler() can produce a lot of false-positive error detections on driver load/reload (especially after crashes/recoveries) and spam the kernel log:

[ 4.958275] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d00ff0 [ 2079.146764] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0 [ 2116.374631] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0 [ 2135.250564] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0 [...]

Reduce the logging level of two false-positive prone error messages from notice to verbose on initialization (only) to not mix it with real error attentions while debugging.

Fixes: 666db4862f2d ("qed: Revise load sequence to avoid PCI errors") Signed-off-by: Alexander Lobakin alobakin@marvell.com Signed-off-by: Igor Russkikh irusskikh@marvell.com Signed-off-by: Michal Kalderon michal.kalderon@marvell.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 2 +- drivers/net/ethernet/qlogic/qed/qed_int.c | 50 +++++++++++++---------- drivers/net/ethernet/qlogic/qed/qed_int.h | 4 +- 3 files changed, 32 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 58913fe4f3457..0629dd4e18d97 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -3096,7 +3096,7 @@ int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params) }

/* Log and clear previous pglue_b errors if such exist */ - qed_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_main_ptt); + qed_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_main_ptt, true);

/* Enable the PF's internal FID_enable in the PXP */ rc = qed_pglueb_set_pfid_enable(p_hwfn, p_hwfn->p_main_ptt, diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c index 9f5113639eaf0..8d106063e9275 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_int.c +++ b/drivers/net/ethernet/qlogic/qed/qed_int.c @@ -256,9 +256,10 @@ out: #define PGLUE_ATTENTION_ZLR_VALID (1 << 25) #define PGLUE_ATTENTION_ILT_VALID (1 << 23)

-int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, - struct qed_ptt *p_ptt) +int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, + bool hw_init) { + char msg[256]; u32 tmp;

tmp = qed_rd(p_hwfn, p_ptt, PGLUE_B_REG_TX_ERR_WR_DETAILS2); @@ -272,22 +273,23 @@ int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, details = qed_rd(p_hwfn, p_ptt, PGLUE_B_REG_TX_ERR_WR_DETAILS);

- DP_NOTICE(p_hwfn, - "Illegal write by chip to [%08x:%08x] blocked.\n" - "Details: %08x [PFID %02x, VFID %02x, VF_VALID %02x]\n" - "Details2 %08x [Was_error %02x BME deassert %02x FID_enable deassert %02x]\n", - addr_hi, addr_lo, details, - (u8)GET_FIELD(details, PGLUE_ATTENTION_DETAILS_PFID), - (u8)GET_FIELD(details, PGLUE_ATTENTION_DETAILS_VFID), - GET_FIELD(details, - PGLUE_ATTENTION_DETAILS_VF_VALID) ? 1 : 0, - tmp, - GET_FIELD(tmp, - PGLUE_ATTENTION_DETAILS2_WAS_ERR) ? 1 : 0, - GET_FIELD(tmp, - PGLUE_ATTENTION_DETAILS2_BME) ? 1 : 0, - GET_FIELD(tmp, - PGLUE_ATTENTION_DETAILS2_FID_EN) ? 1 : 0); + snprintf(msg, sizeof(msg), + "Illegal write by chip to [%08x:%08x] blocked.\n" + "Details: %08x [PFID %02x, VFID %02x, VF_VALID %02x]\n" + "Details2 %08x [Was_error %02x BME deassert %02x FID_enable deassert %02x]", + addr_hi, addr_lo, details, + (u8)GET_FIELD(details, PGLUE_ATTENTION_DETAILS_PFID), + (u8)GET_FIELD(details, PGLUE_ATTENTION_DETAILS_VFID), + !!GET_FIELD(details, PGLUE_ATTENTION_DETAILS_VF_VALID), + tmp, + !!GET_FIELD(tmp, PGLUE_ATTENTION_DETAILS2_WAS_ERR), + !!GET_FIELD(tmp, PGLUE_ATTENTION_DETAILS2_BME), + !!GET_FIELD(tmp, PGLUE_ATTENTION_DETAILS2_FID_EN)); + + if (hw_init) + DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, "%s\n", msg); + else + DP_NOTICE(p_hwfn, "%s\n", msg); }

tmp = qed_rd(p_hwfn, p_ptt, PGLUE_B_REG_TX_ERR_RD_DETAILS2); @@ -320,8 +322,14 @@ int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, }

tmp = qed_rd(p_hwfn, p_ptt, PGLUE_B_REG_TX_ERR_WR_DETAILS_ICPL); - if (tmp & PGLUE_ATTENTION_ICPL_VALID) - DP_NOTICE(p_hwfn, "ICPL error - %08x\n", tmp); + if (tmp & PGLUE_ATTENTION_ICPL_VALID) { + snprintf(msg, sizeof(msg), "ICPL error - %08x", tmp); + + if (hw_init) + DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, "%s\n", msg); + else + DP_NOTICE(p_hwfn, "%s\n", msg); + }

tmp = qed_rd(p_hwfn, p_ptt, PGLUE_B_REG_MASTER_ZLR_ERR_DETAILS); if (tmp & PGLUE_ATTENTION_ZLR_VALID) { @@ -360,7 +368,7 @@ int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn,

static int qed_pglueb_rbc_attn_cb(struct qed_hwfn *p_hwfn) { - return qed_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_dpc_ptt); + return qed_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_dpc_ptt, false); }

#define QED_DORQ_ATTENTION_REASON_MASK (0xfffff) diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.h b/drivers/net/ethernet/qlogic/qed/qed_int.h index 9ad568d93ae65..defb0d1bc45a2 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_int.h +++ b/drivers/net/ethernet/qlogic/qed/qed_int.h @@ -431,7 +431,7 @@ int qed_int_set_timer_res(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,

#define QED_MAPPING_MEMORY_SIZE(dev) (NUM_OF_SBS(dev))

-int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, - struct qed_ptt *p_ptt); +int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, + bool hw_init);

#endif

From: Wang Hai wanghai38@huawei.com

[ Upstream commit 1264d7fa3a64d8bea7aebb77253f917947ffda25 ]

When regmap_update_bits failed in ave_init(), calls of the functions reset_control_assert() and clk_disable_unprepare() were missed. Add goto out_reset_assert to do this.

Fixes: 57878f2f4697 ("net: ethernet: ave: add support for phy-mode setting of system controller") Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Wang Hai wanghai38@huawei.com Reviewed-by: Kunihiko Hayashi hayashi.kunihiko@socionext.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/socionext/sni_ave.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/socionext/sni_ave.c b/drivers/net/ethernet/socionext/sni_ave.c index 67ddf782d98a5..897c895629d03 100644 --- a/drivers/net/ethernet/socionext/sni_ave.c +++ b/drivers/net/ethernet/socionext/sni_ave.c @@ -1191,7 +1191,7 @@ static int ave_init(struct net_device *ndev) ret = regmap_update_bits(priv->regmap, SG_ETPINMODE, priv->pinmode_mask, priv->pinmode_val); if (ret) - return ret; + goto out_reset_assert;

ave_global_reset(ndev);

From: Bjorn Helgaas bhelgaas@google.com

[ Upstream commit d08c30d7a0d1826f771f16cde32bd86e48401791 ]

This reverts commit ec411e02b7a2e785a4ed9ed283207cd14f48699d.

Patrick reported that this commit broke hybrid graphics on a ThinkPad X1 Extreme 2nd with Intel UHD Graphics 630 and NVIDIA GeForce GTX 1650 Mobile:

nouveau 0000:01:00.0: fifo: PBDMA0: 01000000 [] ch 0 [00ff992000 DRM] subc 0 mthd 0008 data 00000000

Karol reported that this commit broke Nouveau firmware loading on a Lenovo P1G2 with Intel UHD Graphics 630 and NVIDIA TU117GLM [Quadro T1000 Mobile]:

nouveau 0000:01:00.0: acr: AHESASC binary failed

In both cases, reverting ec411e02b7a2 solved the problem. Unfortunately, this revert will reintroduce the "Thunderbolt bridges take long time to resume from D3cold" problem: https://bugzilla.kernel.org/show_bug.cgi?id=206837

Link: https://lore.kernel.org/r/CAErSpo5sTeK_my1dEhWp7aHD0xOp87+oHYWkTjbL7ALgDbXo-... Link: https://lore.kernel.org/r/CACO55tsAEa5GXw5oeJPG=mcn+qxNvspXreJYWDJGZBy5v82JD... Link: https://bugzilla.kernel.org/show_bug.cgi?id=208597 Reported-by: Patrick Volkerding volkerdi@gmail.com Reported-by: Karol Herbst kherbst@redhat.com Fixes: ec411e02b7a2 ("PCI/PM: Assume ports without DLL Link Active train links in 100 ms") Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pci.c | 30 +++++++++--------------------- 1 file changed, 9 insertions(+), 21 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index d4758518a97bd..a4efc7e0061f5 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -4662,8 +4662,7 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) * pcie_wait_for_link_delay - Wait until link is active or inactive * @pdev: Bridge device * @active: waiting for active or inactive? - * @delay: Delay to wait after link has become active (in ms). Specify %0 - * for no delay. + * @delay: Delay to wait after link has become active (in ms) * * Use this to wait till link becomes active or inactive. */ @@ -4704,7 +4703,7 @@ static bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, msleep(10); timeout -= 10; } - if (active && ret && delay) + if (active && ret) msleep(delay); else if (ret != active) pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n", @@ -4825,28 +4824,17 @@ void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev) if (!pcie_downstream_port(dev)) return;

- /* - * Per PCIe r5.0, sec 6.6.1, for downstream ports that support - * speeds > 5 GT/s, we must wait for link training to complete - * before the mandatory delay. - * - * We can only tell when link training completes via DLL Link - * Active, which is required for downstream ports that support - * speeds > 5 GT/s (sec 7.5.3.6). Unfortunately some common - * devices do not implement Link Active reporting even when it's - * required, so we'll check for that directly instead of checking - * the supported link speed. We assume devices without Link Active - * reporting can train in 100 ms regardless of speed. - */ - if (dev->link_active_reporting) { - pci_dbg(dev, "waiting for link to train\n"); - if (!pcie_wait_for_link_delay(dev, true, 0)) { + if (pcie_get_speed_cap(dev) <= PCIE_SPEED_5_0GT) { + pci_dbg(dev, "waiting %d ms for downstream link\n", delay); + msleep(delay); + } else { + pci_dbg(dev, "waiting %d ms for downstream link, after activation\n", + delay); + if (!pcie_wait_for_link_delay(dev, true, delay)) { /* Did not train, no need to wait any further */ return; } } - pci_dbg(child, "waiting %d ms to become accessible\n", delay); - msleep(delay);

if (!pci_device_is_present(child)) { pci_dbg(child, "waiting additional %d ms to become accessible\n", delay);

From: Claudiu Manoil claudiu.manoil@nxp.com

[ Upstream commit 26cb7085c8984e5b71d65c374a135134ed8cabb3 ]

For ENETC ports that register an external MDIO bus, the bus doesn't get removed on the error bailout path of enetc_pf_probe().

This issue became much more visible after recent: commit 07095c025ac2 ("net: enetc: Use DT protocol information to set up the ports") Before this commit, one could make probing fail on the error path only by having register_netdev() fail, which is unlikely. But after this commit, because it moved the enetc_of_phy_get() call up in the probing sequence, now we can trigger an mdiobus_free() bug just by forcing enetc_alloc_msix() to return error, i.e. with the 'pci=nomsi' kernel bootarg (since ENETC relies on MSI support to work), as the calltrace below shows:

kernel BUG at /home/eiz/work/enetc/net/drivers/net/phy/mdio_bus.c:648! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [...] Hardware name: LS1028A RDB Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--) pc : mdiobus_free+0x50/0x58 lr : devm_mdiobus_free+0x14/0x20 [...] Call trace: mdiobus_free+0x50/0x58 devm_mdiobus_free+0x14/0x20 release_nodes+0x138/0x228 devres_release_all+0x38/0x60 really_probe+0x1c8/0x368 driver_probe_device+0x5c/0xc0 device_driver_attach+0x74/0x80 __driver_attach+0x8c/0xd8 bus_for_each_dev+0x7c/0xd8 driver_attach+0x24/0x30 bus_add_driver+0x154/0x200 driver_register+0x64/0x120 __pci_register_driver+0x44/0x50 enetc_pf_driver_init+0x24/0x30 do_one_initcall+0x60/0x1c0 kernel_init_freeable+0x1fc/0x274 kernel_init+0x14/0x110 ret_from_fork+0x10/0x34

Fixes: ebfcb23d62ab ("enetc: Add ENETC PF level external MDIO support") Signed-off-by: Claudiu Manoil claudiu.manoil@nxp.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 438648a06f2ae..041e19895adfa 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -919,6 +919,7 @@ static int enetc_pf_probe(struct pci_dev *pdev, return 0;

err_reg_netdev: + enetc_mdio_remove(pf); enetc_of_put_phy(priv); enetc_free_msix(priv); err_alloc_msix:

From: Douglas Anderson dianders@chromium.org

[ Upstream commit 02b9aec59243c6240fc42884acc958602146ddf6 ]

When I have KASAN enabled on my kernel and I start stressing the touchscreen my system tends to hang. The touchscreen is one of the only things that does a lot of big i2c transfers and ends up hitting the DMA paths in the geni i2c driver. It appears that KASAN adds enough delay in my system to tickle a race condition in the DMA setup code.

When the system hangs, I found that it was running the geni_i2c_irq() over and over again. It had these:

m_stat = 0x04000080 rx_st = 0x30000011 dm_tx_st = 0x00000000 dm_rx_st = 0x00000000 dma = 0x00000001

Notably we're in DMA mode but are getting M_RX_IRQ_EN and M_RX_FIFO_WATERMARK_EN over and over again.

Putting some traces in geni_i2c_rx_one_msg() showed that when we failed we were getting to the start of geni_i2c_rx_one_msg() but were never executing geni_se_rx_dma_prep().

I believe that the problem here is that we are starting the geni command before we run geni_se_rx_dma_prep(). If a transfer makes it far enough before we do that then we get into the state I have observed. Let's change the order, which seems to work fine.

Although problems were seen on the RX path, code inspection suggests that the TX should be changed too. Change it as well.

Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Douglas Anderson dianders@chromium.org Tested-by: Sai Prakash Ranjan saiprakash.ranjan@codeaurora.org Reviewed-by: Akash Asthana akashast@codeaurora.org Reviewed-by: Stephen Boyd swboyd@chromium.org Reviewed-by: Mukesh Kumar Savaliya msavaliy@codeaurora.org Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-qcom-geni.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 18d1e4fd4cf34..7f130829bf018 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -367,7 +367,6 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, geni_se_select_mode(se, GENI_SE_FIFO);

writel_relaxed(len, se->base + SE_I2C_RX_TRANS_LEN); - geni_se_setup_m_cmd(se, I2C_READ, m_param);

if (dma_buf && geni_se_rx_dma_prep(se, dma_buf, len, &rx_dma)) { geni_se_select_mode(se, GENI_SE_FIFO); @@ -375,6 +374,8 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, dma_buf = NULL; }

+ geni_se_setup_m_cmd(se, I2C_READ, m_param); + time_left = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT); if (!time_left) geni_i2c_abort_xfer(gi2c); @@ -408,7 +409,6 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, geni_se_select_mode(se, GENI_SE_FIFO);

writel_relaxed(len, se->base + SE_I2C_TX_TRANS_LEN); - geni_se_setup_m_cmd(se, I2C_WRITE, m_param);

if (dma_buf && geni_se_tx_dma_prep(se, dma_buf, len, &tx_dma)) { geni_se_select_mode(se, GENI_SE_FIFO); @@ -416,6 +416,8 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, dma_buf = NULL; }

+ geni_se_setup_m_cmd(se, I2C_WRITE, m_param); + if (!dma_buf) /* Get FIFO IRQ */ writel_relaxed(1, se->base + SE_GENI_TX_WATERMARK_REG);

From: Cong Wang xiyou.wangcong@gmail.com

[ Upstream commit 32818c075c54bb0cae44dd6f7ab00b01c52b8372 ]

geneve_nl2info() sets 'df' conditionally, so we have to initialize it by copying the value from existing geneve device in geneve_changelink().

Fixes: 56c09de347e4 ("geneve: allow changing DF behavior after creation") Reported-by: syzbot+7ebc2e088af5e4c0c9fa@syzkaller.appspotmail.com Cc: Sabrina Dubroca sd@queasysnail.net Signed-off-by: Cong Wang xiyou.wangcong@gmail.com Reviewed-by: Sabrina Dubroca sd@queasysnail.net Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/geneve.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 4661ef865807f..dec52b763d508 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1615,11 +1615,11 @@ static int geneve_changelink(struct net_device *dev, struct nlattr *tb[], struct netlink_ext_ack *extack) { struct geneve_dev *geneve = netdev_priv(dev); + enum ifla_geneve_df df = geneve->df; struct geneve_sock *gs4, *gs6; struct ip_tunnel_info info; bool metadata; bool use_udp6_rx_checksums; - enum ifla_geneve_df df; bool ttl_inherit; int err;

From: Pi-Hsun Shih pihsun@chromium.org

[ Upstream commit d178770d8d21489abf5bafefcbb6d5243b482e9a ]

Currently the basepath is removed only from the beginning of the string. When the symbol is inlined and there's multiple line outputs of addr2line, only the first line would have basepath removed.

Change to remove the basepath prefix from all lines.

Fixes: 31013836a71e ("scripts/decode_stacktrace: match basepath using shell prefix operator, not regex") Co-developed-by: Shik Chen shik@chromium.org Signed-off-by: Pi-Hsun Shih pihsun@chromium.org Signed-off-by: Shik Chen shik@chromium.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Reviewed-by: Stephen Boyd swboyd@chromium.org Cc: Sasha Levin sashal@kernel.org Cc: Nicolas Boichat drinkcat@chromium.org Cc: Jiri Slaby jslaby@suse.cz Link: http://lkml.kernel.org/r/20200720082709.252805-1-pihsun@chromium.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/decode_stacktrace.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/scripts/decode_stacktrace.sh b/scripts/decode_stacktrace.sh index 13e5fbafdf2f7..fe7076fdac8a3 100755 --- a/scripts/decode_stacktrace.sh +++ b/scripts/decode_stacktrace.sh @@ -84,8 +84,8 @@ parse_symbol() { return fi

- # Strip out the base of the path - code=${code#$basepath/} + # Strip out the base of the path on each line + code=$(while read -r line; do echo "${line#$basepath/}"; done <<< "$code")

# In the case of inlines, move everything to same line code=${code//$'\n'/' '}

From: Atish Patra atish.patra@wdc.com

[ Upstream commit 4400231c8acc7e513204c8470c6d796ba47dc169 ]

Currently, initrd_start/end are computed during early_init_dt_scan but used during arch_setup. We will get the following panic if initrd is used and CONFIG_DEBUG_VIRTUAL is turned on.

[ 0.000000] ------------[ cut here ]------------ [ 0.000000] kernel BUG at arch/riscv/mm/physaddr.c:33! [ 0.000000] Kernel BUG [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-rc4-00015-ged0b226fed02 #886 [ 0.000000] epc: ffffffe0002058d2 ra : ffffffe0000053f0 sp : ffffffe001001f40 [ 0.000000] gp : ffffffe00106e250 tp : ffffffe001009d40 t0 : ffffffe00107ee28 [ 0.000000] t1 : 0000000000000000 t2 : ffffffe000a2e880 s0 : ffffffe001001f50 [ 0.000000] s1 : ffffffe0001383e8 a0 : ffffffe00c087e00 a1 : 0000000080200000 [ 0.000000] a2 : 00000000010bf000 a3 : ffffffe00106f3c8 a4 : ffffffe0010bf000 [ 0.000000] a5 : ffffffe000000000 a6 : 0000000000000006 a7 : 0000000000000001 [ 0.000000] s2 : ffffffe00106f068 s3 : ffffffe00106f070 s4 : 0000000080200000 [ 0.000000] s5 : 0000000082200000 s6 : 0000000000000000 s7 : 0000000000000000 [ 0.000000] s8 : 0000000080011010 s9 : 0000000080012700 s10: 0000000000000000 [ 0.000000] s11: 0000000000000000 t3 : 000000000001fe30 t4 : 000000000001fe30 [ 0.000000] t5 : 0000000000000000 t6 : ffffffe00107c471 [ 0.000000] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x22/0x46 with crng_init=0

To avoid the error, initrd_start/end can be computed from phys_initrd_start/size in setup itself. It also improves the initrd placement by aligning the start and size with the page size.

Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code") Signed-off-by: Atish Patra atish.patra@wdc.com Signed-off-by: Palmer Dabbelt palmerdabbelt@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/mm/init.c | 33 +++++++++++++++++++++++++++------ 1 file changed, 27 insertions(+), 6 deletions(-)

diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index fdc772f57edc3..81493cee0a167 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -94,19 +94,40 @@ void __init mem_init(void) #ifdef CONFIG_BLK_DEV_INITRD static void __init setup_initrd(void) { + phys_addr_t start; unsigned long size;

- if (initrd_start >= initrd_end) { - pr_info("initrd not found or empty"); + /* Ignore the virtul address computed during device tree parsing */ + initrd_start = initrd_end = 0; + + if (!phys_initrd_size) + return; + /* + * Round the memory region to page boundaries as per free_initrd_mem() + * This allows us to detect whether the pages overlapping the initrd + * are in use, but more importantly, reserves the entire set of pages + * as we don't want these pages allocated for other purposes. + */ + start = round_down(phys_initrd_start, PAGE_SIZE); + size = phys_initrd_size + (phys_initrd_start - start); + size = round_up(size, PAGE_SIZE); + + if (!memblock_is_region_memory(start, size)) { + pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region", + (u64)start, size); goto disable; } - if (__pa_symbol(initrd_end) > PFN_PHYS(max_low_pfn)) { - pr_err("initrd extends beyond end of memory"); + + if (memblock_is_region_reserved(start, size)) { + pr_err("INITRD: 0x%08llx+0x%08lx overlaps in-use memory region\n", + (u64)start, size); goto disable; }

- size = initrd_end - initrd_start; - memblock_reserve(__pa_symbol(initrd_start), size); + memblock_reserve(start, size); + /* Now convert initrd to virtual addresses */ + initrd_start = (unsigned long)__va(phys_initrd_start); + initrd_end = initrd_start + phys_initrd_size; initrd_below_start_ok = 1;

pr_info("Initial ramdisk at: 0x%p (%lu bytes)\n",

From: Federico Ricchiuto fed.ricchiuto@gmail.com

[ Upstream commit 43e666acb79f3d355dd89bf20f4d25d3b15da13e ]

The Mediacom FlexBook edge13 uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list.

Signed-off-by: Federico Ricchiuto fed.ricchiuto@gmail.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c index ec142bc8c1daf..35f3bfc3e6f59 100644 --- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c @@ -373,6 +373,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = { }, .driver_data = (void *)&sipodev_desc }, + { + .ident = "Mediacom FlexBook edge 13", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MEDIACOM"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "FlexBook_edge13-M-FBE13"), + }, + .driver_data = (void *)&sipodev_desc + }, { .ident = "Odys Winbook 13", .matches = {

From: Peter Ujfalusi peter.ujfalusi@ti.com

[ Upstream commit 5a9377cc7421b59b13c9b90b8dc0aca332a1c958 ]

Some of the earlier errors should be sent to the error cleanup path to make sure that the uchan struct is reset, the dma_pool (if allocated) is released and memcpy channel pairs are released in a correct way.

Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com Link: https://lore.kernel.org/r/20200527070612.636-2-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/ti/k3-udma.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c index 7cab23fe5c73f..35f54a1af29d8 100644 --- a/drivers/dma/ti/k3-udma.c +++ b/drivers/dma/ti/k3-udma.c @@ -1773,7 +1773,8 @@ static int udma_alloc_chan_resources(struct dma_chan *chan) dev_err(ud->ddev.dev, "Descriptor pool allocation failed\n"); uc->use_dma_pool = false; - return -ENOMEM; + ret = -ENOMEM; + goto err_cleanup; } }

@@ -1793,16 +1794,18 @@ static int udma_alloc_chan_resources(struct dma_chan *chan)

ret = udma_get_chan_pair(uc); if (ret) - return ret; + goto err_cleanup;

ret = udma_alloc_tx_resources(uc); - if (ret) - return ret; + if (ret) { + udma_put_rchan(uc); + goto err_cleanup; + }

ret = udma_alloc_rx_resources(uc); if (ret) { udma_free_tx_resources(uc); - return ret; + goto err_cleanup; }

uc->config.src_thread = ud->psil_base + uc->tchan->id; @@ -1820,10 +1823,8 @@ static int udma_alloc_chan_resources(struct dma_chan *chan) uc->id);

ret = udma_alloc_tx_resources(uc); - if (ret) { - uc->config.remote_thread_id = -1; - return ret; - } + if (ret) + goto err_cleanup;

uc->config.src_thread = ud->psil_base + uc->tchan->id; uc->config.dst_thread = uc->config.remote_thread_id; @@ -1840,10 +1841,8 @@ static int udma_alloc_chan_resources(struct dma_chan *chan) uc->id);

ret = udma_alloc_rx_resources(uc); - if (ret) { - uc->config.remote_thread_id = -1; - return ret; - } + if (ret) + goto err_cleanup;

uc->config.src_thread = uc->config.remote_thread_id; uc->config.dst_thread = (ud->psil_base + uc->rchan->id) | @@ -1858,7 +1857,9 @@ static int udma_alloc_chan_resources(struct dma_chan *chan) /* Can not happen */ dev_err(uc->ud->dev, "%s: chan%d invalid direction (%u)\n", __func__, uc->id, uc->config.dir); - return -EINVAL; + ret = -EINVAL; + goto err_cleanup; + }

/* check if the channel configuration was successful */ @@ -1936,7 +1937,7 @@ err_psi_free: err_res_free: udma_free_tx_resources(uc); udma_free_rx_resources(uc); - +err_cleanup: udma_reset_uchan(uc);

if (uc->use_dma_pool) {

From: Rodrigo Rivas Costa rodrigorivascosta@gmail.com

[ Upstream commit 2d3f53a80e4eed078669853a178ed96d88f74143 ]

Using uhid and KASAN this driver crashed because it was getting several connection events where it only expected one. Then the device was added several times to the static device list and it got corrupted.

This patch checks if the device is already in the list before adding it.

Signed-off-by: Rodrigo Rivas Costa rodrigorivascosta@gmail.com Tested-by: Siarhei Vishniakou svv@google.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-steam.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/hid-steam.c b/drivers/hid/hid-steam.c index 6286204d4c560..a3b151b29bd71 100644 --- a/drivers/hid/hid-steam.c +++ b/drivers/hid/hid-steam.c @@ -526,7 +526,8 @@ static int steam_register(struct steam_device *steam) steam_battery_register(steam);

mutex_lock(&steam_devices_lock); - list_add(&steam->list, &steam_devices); + if (list_empty(&steam->list)) + list_add(&steam->list, &steam_devices); mutex_unlock(&steam_devices_lock); }

@@ -552,7 +553,7 @@ static void steam_unregister(struct steam_device *steam) hid_info(steam->hdev, "Steam Controller '%s' disconnected", steam->serial_no); mutex_lock(&steam_devices_lock); - list_del(&steam->list); + list_del_init(&steam->list); mutex_unlock(&steam_devices_lock); steam->serial_no[0] = 0; } @@ -738,6 +739,7 @@ static int steam_probe(struct hid_device *hdev, mutex_init(&steam->mutex); steam->quirks = id->driver_data; INIT_WORK(&steam->work_connect, steam_work_connect_cb); + INIT_LIST_HEAD(&steam->list);

steam->client_hdev = steam_create_client_hid(hdev); if (IS_ERR(steam->client_hdev)) {

From: Dave Jiang dave.jiang@intel.com

[ Upstream commit 0b8975bdc0cc5310d48d9bdd871cefebe1f94c99 ]

Fix the hw descriptor fields for delta record in user exported idxd.h header. Missing the "expected result mask" field.

Reported-by: Mona Hossain mona.hossain@intel.com Signed-off-by: Dave Jiang dave.jiang@intel.com Link: https://lore.kernel.org/r/159120526866.65385.536565786678052944.stgit@djiang... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/uapi/linux/idxd.h | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/include/uapi/linux/idxd.h b/include/uapi/linux/idxd.h index 1f412fbf561bb..e103c1434e4b0 100644 --- a/include/uapi/linux/idxd.h +++ b/include/uapi/linux/idxd.h @@ -110,9 +110,12 @@ struct dsa_hw_desc { uint16_t rsvd1; union { uint8_t expected_res; + /* create delta record */ struct { uint64_t delta_addr; uint32_t max_delta_size; + uint32_t delt_rsvd; + uint8_t expected_res_mask; }; uint32_t delta_rec_size; uint64_t dest2;

From: Dinghao Liu dinghao.liu@zju.edu.cn

[ Upstream commit 5b78fac4b1ba731cf4177fdbc1e3a4661521bcd0 ]

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu dinghao.liu@zju.edu.cn Reviewed-by: Jon Hunter jonathanh@nvidia.com Link: https://lore.kernel.org/r/20200624064626.19855-1-dinghao.liu@zju.edu.cn Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/tegra210-adma.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c index db58d7e4f9fec..c5fa2ef74abc7 100644 --- a/drivers/dma/tegra210-adma.c +++ b/drivers/dma/tegra210-adma.c @@ -658,6 +658,7 @@ static int tegra_adma_alloc_chan_resources(struct dma_chan *dc)

ret = pm_runtime_get_sync(tdc2dev(tdc)); if (ret < 0) { + pm_runtime_put_noidle(tdc2dev(tdc)); free_irq(tdc->irq, tdc); return ret; } @@ -869,8 +870,10 @@ static int tegra_adma_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev);

ret = pm_runtime_get_sync(&pdev->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_noidle(&pdev->dev); goto rpm_disable; + }

ret = tegra_adma_init(tdma); if (ret)

From: Merlijn Wajer merlijn@wizzup.org

[ Upstream commit c463bb2a8f8d7d97aa414bf7714fc77e9d3b10df ]

This event code represents the state of a removable cover of a device. Value 0 means that the cover is open or removed, value 1 means that the cover is closed.

Reviewed-by: Sebastian Reichel sebastian.reichel@collabora.com Acked-by: Tony Lindgren tony@atomide.com Signed-off-by: Merlijn Wajer merlijn@wizzup.org Link: https://lore.kernel.org/r/20200612125402.18393-2-merlijn@wizzup.org Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/mod_devicetable.h | 2 +- include/uapi/linux/input-event-codes.h | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 0754b8d71262b..8a84f11bf1246 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -318,7 +318,7 @@ struct pcmcia_device_id { #define INPUT_DEVICE_ID_LED_MAX 0x0f #define INPUT_DEVICE_ID_SND_MAX 0x07 #define INPUT_DEVICE_ID_FF_MAX 0x7f -#define INPUT_DEVICE_ID_SW_MAX 0x0f +#define INPUT_DEVICE_ID_SW_MAX 0x10 #define INPUT_DEVICE_ID_PROP_MAX 0x1f

#define INPUT_DEVICE_ID_MATCH_BUS 1 diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index b6a835d378263..0c2e27d28e0ac 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h @@ -888,7 +888,8 @@ #define SW_LINEIN_INSERT 0x0d /* set = inserted */ #define SW_MUTE_DEVICE 0x0e /* set = device disabled */ #define SW_PEN_INSERTED 0x0f /* set = pen inserted */ -#define SW_MAX 0x0f +#define SW_MACHINE_COVER 0x10 /* set = cover closed */ +#define SW_MAX 0x10 #define SW_CNT (SW_MAX+1)

/*

From: leilk.liu leilk.liu@mediatek.com

[ Upstream commit 44b37eb79e16a56cb30ba55b2da452396b941e7a ]

this patch use correct SPI_CFG2_REG offset.

Signed-off-by: leilk.liu leilk.liu@mediatek.com Link: https://lore.kernel.org/r/20200701090020.7935-1-leilk.liu@mediatek.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-mt65xx.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 6783e12c40c22..a556795caeef4 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -36,7 +36,6 @@ #define SPI_CFG0_SCK_LOW_OFFSET 8 #define SPI_CFG0_CS_HOLD_OFFSET 16 #define SPI_CFG0_CS_SETUP_OFFSET 24 -#define SPI_ADJUST_CFG0_SCK_LOW_OFFSET 16 #define SPI_ADJUST_CFG0_CS_HOLD_OFFSET 0 #define SPI_ADJUST_CFG0_CS_SETUP_OFFSET 16

@@ -48,6 +47,8 @@ #define SPI_CFG1_CS_IDLE_MASK 0xff #define SPI_CFG1_PACKET_LOOP_MASK 0xff00 #define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000 +#define SPI_CFG2_SCK_HIGH_OFFSET 0 +#define SPI_CFG2_SCK_LOW_OFFSET 16

#define SPI_CMD_ACT BIT(0) #define SPI_CMD_RESUME BIT(1) @@ -283,7 +284,7 @@ static void mtk_spi_set_cs(struct spi_device *spi, bool enable) static void mtk_spi_prepare_transfer(struct spi_master *master, struct spi_transfer *xfer) { - u32 spi_clk_hz, div, sck_time, cs_time, reg_val = 0; + u32 spi_clk_hz, div, sck_time, cs_time, reg_val; struct mtk_spi *mdata = spi_master_get_devdata(master);

spi_clk_hz = clk_get_rate(mdata->spi_clk); @@ -296,18 +297,18 @@ static void mtk_spi_prepare_transfer(struct spi_master *master, cs_time = sck_time * 2;

if (mdata->dev_comp->enhance_timing) { + reg_val = (((sck_time - 1) & 0xffff) + << SPI_CFG2_SCK_HIGH_OFFSET); reg_val |= (((sck_time - 1) & 0xffff) - << SPI_CFG0_SCK_HIGH_OFFSET); - reg_val |= (((sck_time - 1) & 0xffff) - << SPI_ADJUST_CFG0_SCK_LOW_OFFSET); + << SPI_CFG2_SCK_LOW_OFFSET); writel(reg_val, mdata->base + SPI_CFG2_REG); - reg_val |= (((cs_time - 1) & 0xffff) + reg_val = (((cs_time - 1) & 0xffff) << SPI_ADJUST_CFG0_CS_HOLD_OFFSET); reg_val |= (((cs_time - 1) & 0xffff) << SPI_ADJUST_CFG0_CS_SETUP_OFFSET); writel(reg_val, mdata->base + SPI_CFG0_REG); } else { - reg_val |= (((sck_time - 1) & 0xff) + reg_val = (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_HIGH_OFFSET); reg_val |= (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_LOW_OFFSET); reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);

From: Evgeny Novikov novikov@ispras.ru

[ Upstream commit bc4071aafcf4d0535ee423b69167696d6c03207d ]

aspeed_create_fan() reads a pwm_port value using of_property_read_u32(). If pwm_port will be more than ARRAY_SIZE(pwm_port_params), there will be a buffer overflow in aspeed_create_pwm_port()->aspeed_set_pwm_port_enable(). The patch fixes the potential buffer overflow.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov novikov@ispras.ru Link: https://lore.kernel.org/r/20200703111518.9644-1-novikov@ispras.ru Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/aspeed-pwm-tacho.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c index 33fb54845bf6d..3d8239fd66ed6 100644 --- a/drivers/hwmon/aspeed-pwm-tacho.c +++ b/drivers/hwmon/aspeed-pwm-tacho.c @@ -851,6 +851,8 @@ static int aspeed_create_fan(struct device *dev, ret = of_property_read_u32(child, "reg", &pwm_port); if (ret) return ret; + if (pwm_port >= ARRAY_SIZE(pwm_port_params)) + return -EINVAL; aspeed_create_pwm_port(priv, (u8)pwm_port);

ret = of_property_count_u8_elems(child, "cooling-levels");

From: Leonid Ravich Leonid.Ravich@emc.com

[ Upstream commit 87730ccbddcb48478b1b88e88b14e73424130764 ]

DMA transaction time to completion is a function of PCI bandwidth, transaction size and a queue depth. So hard coded value for timeouts might be wrong for some scenarios.

Signed-off-by: Leonid Ravich Leonid.Ravich@emc.com Reviewed-by: Dave Jiang dave.jiang@intel.com Link: https://lore.kernel.org/r/20200701184816.29138-1-leonid.ravich@dell.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/ioat/dma.c | 12 ++++++++++++ drivers/dma/ioat/dma.h | 2 -- 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index 18c011e57592e..8e2a4d1f0be53 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -26,6 +26,18 @@

#include "../dmaengine.h"

+int completion_timeout = 200; +module_param(completion_timeout, int, 0644); +MODULE_PARM_DESC(completion_timeout, + "set ioat completion timeout [msec] (default 200 [msec])"); +int idle_timeout = 2000; +module_param(idle_timeout, int, 0644); +MODULE_PARM_DESC(idle_timeout, + "set ioat idel timeout [msec] (default 2000 [msec])"); + +#define IDLE_TIMEOUT msecs_to_jiffies(idle_timeout) +#define COMPLETION_TIMEOUT msecs_to_jiffies(completion_timeout) + static char *chanerr_str[] = { "DMA Transfer Source Address Error", "DMA Transfer Destination Address Error", diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index b8e8e0b9693c7..4ac9134962f3b 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -99,8 +99,6 @@ struct ioatdma_chan { #define IOAT_RUN 5 #define IOAT_CHAN_ACTIVE 6 struct timer_list timer; - #define COMPLETION_TIMEOUT msecs_to_jiffies(100) - #define IDLE_TIMEOUT msecs_to_jiffies(2000) #define RESET_DELAY msecs_to_jiffies(100) struct ioatdma_device *ioat_dma; dma_addr_t completion_dma;

From: Derek Basehore dbasehore@chromium.org

[ Upstream commit 966334dfc472bdfa67bed864842943b19755d192 ]

This moves the wakeup increment for elan devices to the touch report. This prevents the drivers from incorrectly reporting a wakeup when the resume callback resets then device, which causes an interrupt to occur.

Signed-off-by: Derek Basehore dbasehore@chromium.org Link: https://lore.kernel.org/r/20200706235046.1984283-1-dbasehore@chromium.org Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/mouse/elan_i2c_core.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 8719da5403834..196e8505dd8d7 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -951,6 +951,8 @@ static void elan_report_absolute(struct elan_tp_data *data, u8 *packet) u8 hover_info = packet[ETP_HOVER_INFO_OFFSET]; bool contact_valid, hover_event;

+ pm_wakeup_event(&data->client->dev, 0); + hover_event = hover_info & 0x40; for (i = 0; i < ETP_MAX_FINGERS; i++) { contact_valid = tp_info & (1U << (3 + i)); @@ -974,6 +976,8 @@ static void elan_report_trackpoint(struct elan_tp_data *data, u8 *report) u8 *packet = &report[ETP_REPORT_ID_OFFSET + 1]; int x, y;

+ pm_wakeup_event(&data->client->dev, 0); + if (!data->tp_input) { dev_warn_once(&data->client->dev, "received a trackpoint report while no trackpoint device has been created. Please report upstream.\n"); @@ -998,7 +1002,6 @@ static void elan_report_trackpoint(struct elan_tp_data *data, u8 *report) static irqreturn_t elan_isr(int irq, void *dev_id) { struct elan_tp_data *data = dev_id; - struct device *dev = &data->client->dev; int error; u8 report[ETP_MAX_REPORT_LEN];

@@ -1016,8 +1019,6 @@ static irqreturn_t elan_isr(int irq, void *dev_id) if (error) goto out;

- pm_wakeup_event(dev, 0); - switch (report[ETP_REPORT_ID_OFFSET]) { case ETP_REPORT_ID: elan_report_absolute(data, report); @@ -1026,7 +1027,7 @@ static irqreturn_t elan_isr(int irq, void *dev_id) elan_report_trackpoint(data, report); break; default: - dev_err(dev, "invalid report id data (%x)\n", + dev_err(&data->client->dev, "invalid report id data (%x)\n", report[ETP_REPORT_ID_OFFSET]); }

From: Heikki Krogerus heikki.krogerus@linux.intel.com

[ Upstream commit e25d1e8532c3d84f075deca1580a7d61e0f43ce6 ]

This patch adds the necessary PCI ID for Intel Jasper Lake devices.

Signed-off-by: Heikki Krogerus heikki.krogerus@linux.intel.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 47b7e83d90626..139474c3e77b1 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -39,6 +39,7 @@ #define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e #define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee #define PCI_DEVICE_ID_INTEL_TGPH 0x43ee +#define PCI_DEVICE_ID_INTEL_JSP 0x4dee

#define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -362,6 +363,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPH), (kernel_ulong_t) &dwc3_pci_intel_properties, },

+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_JSP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */

From: Peter Chen peter.chen@nxp.com

[ Upstream commit 9f81d45c79271def8a9b90447b04b9c6323291f9 ]

It is found by sparse.

Reported-by: kbuild test robot lkp@intel.com Signed-off-by: Peter Chen peter.chen@nxp.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/cdns3/ep0.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c index da4c5eb03d7ee..666cebd9c5f29 100644 --- a/drivers/usb/cdns3/ep0.c +++ b/drivers/usb/cdns3/ep0.c @@ -37,18 +37,18 @@ static void cdns3_ep0_run_transfer(struct cdns3_device *priv_dev, struct cdns3_usb_regs __iomem *regs = priv_dev->regs; struct cdns3_endpoint *priv_ep = priv_dev->eps[0];

- priv_ep->trb_pool[0].buffer = TRB_BUFFER(dma_addr); - priv_ep->trb_pool[0].length = TRB_LEN(length); + priv_ep->trb_pool[0].buffer = cpu_to_le32(TRB_BUFFER(dma_addr)); + priv_ep->trb_pool[0].length = cpu_to_le32(TRB_LEN(length));

if (zlp) { - priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_TYPE(TRB_NORMAL); - priv_ep->trb_pool[1].buffer = TRB_BUFFER(dma_addr); - priv_ep->trb_pool[1].length = TRB_LEN(0); - priv_ep->trb_pool[1].control = TRB_CYCLE | TRB_IOC | - TRB_TYPE(TRB_NORMAL); + priv_ep->trb_pool[0].control = cpu_to_le32(TRB_CYCLE | TRB_TYPE(TRB_NORMAL)); + priv_ep->trb_pool[1].buffer = cpu_to_le32(TRB_BUFFER(dma_addr)); + priv_ep->trb_pool[1].length = cpu_to_le32(TRB_LEN(0)); + priv_ep->trb_pool[1].control = cpu_to_le32(TRB_CYCLE | TRB_IOC | + TRB_TYPE(TRB_NORMAL)); } else { - priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_IOC | - TRB_TYPE(TRB_NORMAL); + priv_ep->trb_pool[0].control = cpu_to_le32(TRB_CYCLE | TRB_IOC | + TRB_TYPE(TRB_NORMAL)); priv_ep->trb_pool[1].control = 0; }

@@ -264,11 +264,11 @@ static int cdns3_req_ep0_get_status(struct cdns3_device *priv_dev, case USB_RECIP_INTERFACE: return cdns3_ep0_delegate_req(priv_dev, ctrl); case USB_RECIP_ENDPOINT: - index = cdns3_ep_addr_to_index(ctrl->wIndex); + index = cdns3_ep_addr_to_index(le16_to_cpu(ctrl->wIndex)); priv_ep = priv_dev->eps[index];

/* check if endpoint is stalled or stall is pending */ - cdns3_select_ep(priv_dev, ctrl->wIndex); + cdns3_select_ep(priv_dev, le16_to_cpu(ctrl->wIndex)); if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts)) || (priv_ep->flags & EP_STALL_PENDING)) usb_status = BIT(USB_ENDPOINT_HALT); @@ -388,10 +388,10 @@ static int cdns3_ep0_feature_handle_endpoint(struct cdns3_device *priv_dev, if (!(ctrl->wIndex & ~USB_DIR_IN)) return 0;

- index = cdns3_ep_addr_to_index(ctrl->wIndex); + index = cdns3_ep_addr_to_index(le16_to_cpu(ctrl->wIndex)); priv_ep = priv_dev->eps[index];

- cdns3_select_ep(priv_dev, ctrl->wIndex); + cdns3_select_ep(priv_dev, le16_to_cpu(ctrl->wIndex));

if (set) __cdns3_gadget_ep_set_halt(priv_ep); @@ -452,7 +452,7 @@ static int cdns3_req_ep0_set_sel(struct cdns3_device *priv_dev, if (priv_dev->gadget.state < USB_STATE_ADDRESS) return -EINVAL;

- if (ctrl_req->wLength != 6) { + if (le16_to_cpu(ctrl_req->wLength) != 6) { dev_err(priv_dev->dev, "Set SEL should be 6 bytes, got %d\n", ctrl_req->wLength); return -EINVAL; @@ -476,7 +476,7 @@ static int cdns3_req_ep0_set_isoch_delay(struct cdns3_device *priv_dev, if (ctrl_req->wIndex || ctrl_req->wLength) return -EINVAL;

- priv_dev->isoch_delay = ctrl_req->wValue; + priv_dev->isoch_delay = le16_to_cpu(ctrl_req->wValue);

return 0; }

From: Chu Lin linchuyuan@google.com

[ Upstream commit 6d1d41c075a1a54ba03370e268171fec20e06563 ]

Issue: When PEC is enabled, binding adm1272 to the adm1275 would fail due to PEC error. See below: adm1275: probe of xxxx failed with error -74

Diagnosis: Per the datasheet of adm1272, adm1278, adm1293 and amd1294, PMON_CONFIG (0xd4) is 16bits wide. On the other hand, PMON_CONFIG (0xd4) for adm1275 is 8bits wide. The driver should not assume everything is 8bits wide and read only 8bits from it.

Solution: If it is adm1272, adm1278, adm1293 and adm1294, use i2c_read_word. Else, use i2c_read_byte

Testing: Binding adm1272 to the driver. The change is only tested on adm1272.

Signed-off-by: Chu Lin linchuyuan@google.com Link: https://lore.kernel.org/r/20200709040612.3977094-1-linchuyuan@google.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/pmbus/adm1275.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c index e25f541227dae..19317575d1c6a 100644 --- a/drivers/hwmon/pmbus/adm1275.c +++ b/drivers/hwmon/pmbus/adm1275.c @@ -465,6 +465,7 @@ MODULE_DEVICE_TABLE(i2c, adm1275_id); static int adm1275_probe(struct i2c_client *client, const struct i2c_device_id *id) { + s32 (*config_read_fn)(const struct i2c_client *client, u8 reg); u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; int config, device_config; int ret; @@ -510,11 +511,16 @@ static int adm1275_probe(struct i2c_client *client, "Device mismatch: Configured %s, detected %s\n", id->name, mid->name);

- config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG); + if (mid->driver_data == adm1272 || mid->driver_data == adm1278 || + mid->driver_data == adm1293 || mid->driver_data == adm1294) + config_read_fn = i2c_smbus_read_word_data; + else + config_read_fn = i2c_smbus_read_byte_data; + config = config_read_fn(client, ADM1275_PMON_CONFIG); if (config < 0) return config;

- device_config = i2c_smbus_read_byte_data(client, ADM1275_DEVICE_CONFIG); + device_config = config_read_fn(client, ADM1275_DEVICE_CONFIG); if (device_config < 0) return device_config;

From: Jack Xiao Jack.Xiao@amd.com

[ Upstream commit d845a2051b6b673fab4229b920ea04c7c4352b51 ]

Remove signaled jobs from job list and ensure the job was indeed preempted.

Signed-off-by: Jack Xiao Jack.Xiao@amd.com Reviewed-by: Hawking Zhang Hawking.Zhang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c index c0f9a651dc067..92b18c4760e55 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c @@ -1156,27 +1156,37 @@ static void amdgpu_ib_preempt_job_recovery(struct drm_gpu_scheduler *sched) static void amdgpu_ib_preempt_mark_partial_job(struct amdgpu_ring *ring) { struct amdgpu_job *job; - struct drm_sched_job *s_job; + struct drm_sched_job *s_job, *tmp; uint32_t preempt_seq; struct dma_fence *fence, **ptr; struct amdgpu_fence_driver *drv = &ring->fence_drv; struct drm_gpu_scheduler *sched = &ring->sched; + bool preempted = true;

if (ring->funcs->type != AMDGPU_RING_TYPE_GFX) return;

preempt_seq = le32_to_cpu(*(drv->cpu_addr + 2)); - if (preempt_seq <= atomic_read(&drv->last_seq)) - return; + if (preempt_seq <= atomic_read(&drv->last_seq)) { + preempted = false; + goto no_preempt; + }

preempt_seq &= drv->num_fences_mask; ptr = &drv->fences[preempt_seq]; fence = rcu_dereference_protected(*ptr, 1);

+no_preempt: spin_lock(&sched->job_list_lock); - list_for_each_entry(s_job, &sched->ring_mirror_list, node) { + list_for_each_entry_safe(s_job, tmp, &sched->ring_mirror_list, node) { + if (dma_fence_is_signaled(&s_job->s_fence->finished)) { + /* remove job from ring_mirror_list */ + list_del_init(&s_job->node); + sched->ops->free_job(s_job); + continue; + } job = to_amdgpu_job(s_job); - if (job->fence == fence) + if (preempted && job->fence == fence) /* mark the job as preempted */ job->preemption_status |= AMDGPU_IB_PREEMPTED; }

From: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com

[ Upstream commit e1eea3f839f41368d7cb4eb2d872d5b288677e94 ]

Added new PCI device ids for supporting mailbox and MMIO interface for Sapphire Rapids.

Signed-off-by: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/intel_speed_select_if/isst_if_common.h | 3 +++ drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c | 1 + drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c | 1 + 3 files changed, 5 insertions(+)

diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_common.h b/drivers/platform/x86/intel_speed_select_if/isst_if_common.h index 1409a5bb55820..4f6f7f0761fc1 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_common.h +++ b/drivers/platform/x86/intel_speed_select_if/isst_if_common.h @@ -13,6 +13,9 @@ #define INTEL_RAPL_PRIO_DEVID_0 0x3451 #define INTEL_CFG_MBOX_DEVID_0 0x3459

+#define INTEL_RAPL_PRIO_DEVID_1 0x3251 +#define INTEL_CFG_MBOX_DEVID_1 0x3259 + /* * Validate maximum commands in a single request. * This is enough to handle command to every core in one ioctl, or all diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c b/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c index de4169d0796bd..9a055fd54053f 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c +++ b/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c @@ -148,6 +148,7 @@ static long isst_if_mbox_proc_cmd(u8 *cmd_ptr, int *write_only, int resume)

static const struct pci_device_id isst_if_mbox_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_CFG_MBOX_DEVID_0)}, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_CFG_MBOX_DEVID_1)}, { 0 }, }; MODULE_DEVICE_TABLE(pci, isst_if_mbox_ids); diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c index 3584859fcc421..aa17fd7817f8f 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c +++ b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c @@ -72,6 +72,7 @@ static long isst_if_mmio_rd_wr(u8 *cmd_ptr, int *write_only, int resume)

static const struct pci_device_id isst_if_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_RAPL_PRIO_DEVID_0)}, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_RAPL_PRIO_DEVID_1)}, { 0 }, }; MODULE_DEVICE_TABLE(pci, isst_if_ids);

From: Cristian Marussi cristian.marussi@arm.com

[ Upstream commit 3ce17cd2b94907f6d91b81b32848044b84c97606 ]

SMATCH detected a potential buffer overflow in the manipulation of hwmon_attributes array inside the scmi_hwmon_probe function:

drivers/hwmon/scmi-hwmon.c:226 scmi_hwmon_probe() error: buffer overflow 'hwmon_attributes' 6 <= 9

Fix it by statically declaring the size of the array as the maximum possible as defined by hwmon_max define.

Signed-off-by: Cristian Marussi cristian.marussi@arm.com Reviewed-by: Sudeep Holla sudeep.holla@arm.com Link: https://lore.kernel.org/r/20200715121338.GA18761@e119603-lin.cambridge.arm.c... Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/scmi-hwmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c index 286d3cfda7de8..d421e691318b3 100644 --- a/drivers/hwmon/scmi-hwmon.c +++ b/drivers/hwmon/scmi-hwmon.c @@ -147,7 +147,7 @@ static enum hwmon_sensor_types scmi_types[] = { [ENERGY] = hwmon_energy, };

-static u32 hwmon_attributes[] = { +static u32 hwmon_attributes[hwmon_max] = { [hwmon_chip] = HWMON_C_REGISTER_TZ, [hwmon_temp] = HWMON_T_INPUT | HWMON_T_LABEL, [hwmon_in] = HWMON_I_INPUT | HWMON_I_LABEL,

From: Qi Liu liuqi115@huawei.com

[ Upstream commit bdc5c744c7b6457d18a95c26769dad0e7f480a08 ]

When users try to remove PMU modules during perf sampling, kernel panic will happen because the pmu->read() is a NULL pointer here.

INFO on HiSilicon hip08 platform as follow: pc : hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu] lr : hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu] sp : ffff800010103e90 x29: ffff800010103e90 x28: ffff0027db0c0e40 x27: ffffa29a76f129d8 x26: ffffa29a77ceb000 x25: ffffa29a773a5000 x24: ffffa29a77392000 x23: ffffddffe5943f08 x22: ffff002784285960 x21: ffff002784285800 x20: ffff0027d2e76c80 x19: ffff0027842859e0 x18: ffff80003498bcc8 x17: ffffa29a76afe910 x16: ffffa29a7583f530 x15: 16151a1512061a1e x14: 0000000000000000 x13: ffffa29a76f1e238 x12: 0000000000000001 x11: 0000000000000400 x10: 00000000000009f0 x9 : ffff8000107b3e70 x8 : ffff0027db0c1890 x7 : ffffa29a773a7000 x6 : 00000007f5131013 x5 : 00000007f5131013 x4 : 09f257d417c00000 x3 : 00000002187bd7ce x2 : ffffa29a38f0f0d8 x1 : ffffa29a38eae268 x0 : ffff0027d2e76c80 Call trace: hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu] hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu] __perf_event_read+0x1a0/0x1f8 flush_smp_call_function_queue+0xa0/0x160 generic_smp_call_function_single_interrupt+0x18/0x20 handle_IPI+0x31c/0x4dc gic_handle_irq+0x2c8/0x310 el1_irq+0xcc/0x180 arch_cpu_idle+0x4c/0x20c default_idle_call+0x20/0x30 do_idle+0x1b4/0x270 cpu_startup_entry+0x28/0x30 secondary_start_kernel+0x1a4/0x1fc

To solve the above issue, current module should be registered to kernel, so that try_module_get() can be invoked when perf sampling starts. This adds the reference counting of module and could prevent users from removing modules during sampling.

Reported-by: Haifeng Wang wang.wanghaifeng@huawei.com Signed-off-by: Qi Liu liuqi115@huawei.com Reviewed-by: John Garry john.garry@huawei.com Link: https://lore.kernel.org/r/1594891165-8228-1-git-send-email-liuqi115@huawei.c... Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/perf/arm_smmuv3_pmu.c | 1 + drivers/perf/fsl_imx8_ddr_perf.c | 1 + drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c | 1 + drivers/perf/hisilicon/hisi_uncore_hha_pmu.c | 1 + drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c | 1 + 5 files changed, 5 insertions(+)

diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c index 48e28ef93a702..90caba56dfbc1 100644 --- a/drivers/perf/arm_smmuv3_pmu.c +++ b/drivers/perf/arm_smmuv3_pmu.c @@ -742,6 +742,7 @@ static int smmu_pmu_probe(struct platform_device *pdev) platform_set_drvdata(pdev, smmu_pmu);

smmu_pmu->pmu = (struct pmu) { + .module = THIS_MODULE, .task_ctx_nr = perf_invalid_context, .pmu_enable = smmu_pmu_enable, .pmu_disable = smmu_pmu_disable, diff --git a/drivers/perf/fsl_imx8_ddr_perf.c b/drivers/perf/fsl_imx8_ddr_perf.c index 90884d14f95fa..2aed2d96f8ae7 100644 --- a/drivers/perf/fsl_imx8_ddr_perf.c +++ b/drivers/perf/fsl_imx8_ddr_perf.c @@ -512,6 +512,7 @@ static int ddr_perf_init(struct ddr_pmu *pmu, void __iomem *base, { *pmu = (struct ddr_pmu) { .pmu = (struct pmu) { + .module = THIS_MODULE, .capabilities = PERF_PMU_CAP_NO_EXCLUDE, .task_ctx_nr = perf_invalid_context, .attr_groups = attr_groups, diff --git a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c index 453f1c6a16ca8..c65da06abb041 100644 --- a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c @@ -378,6 +378,7 @@ static int hisi_ddrc_pmu_probe(struct platform_device *pdev) ddrc_pmu->sccl_id, ddrc_pmu->index_id); ddrc_pmu->pmu = (struct pmu) { .name = name, + .module = THIS_MODULE, .task_ctx_nr = perf_invalid_context, .event_init = hisi_uncore_pmu_event_init, .pmu_enable = hisi_uncore_pmu_enable, diff --git a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c index e5af9d7e6e145..ee6e6a1c390a0 100644 --- a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c @@ -390,6 +390,7 @@ static int hisi_hha_pmu_probe(struct platform_device *pdev) hha_pmu->sccl_id, hha_pmu->index_id); hha_pmu->pmu = (struct pmu) { .name = name, + .module = THIS_MODULE, .task_ctx_nr = perf_invalid_context, .event_init = hisi_uncore_pmu_event_init, .pmu_enable = hisi_uncore_pmu_enable, diff --git a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c index 479de4be99eba..c8b98d3a8432a 100644 --- a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c @@ -380,6 +380,7 @@ static int hisi_l3c_pmu_probe(struct platform_device *pdev) l3c_pmu->sccl_id, l3c_pmu->index_id); l3c_pmu->pmu = (struct pmu) { .name = name, + .module = THIS_MODULE, .task_ctx_nr = perf_invalid_context, .event_init = hisi_uncore_pmu_event_init, .pmu_enable = hisi_uncore_pmu_enable,

From: Arnd Bergmann arnd@arndb.de

[ Upstream commit 81e96851ea32deb2c921c870eecabf335f598aeb ]

The clang integrated assembler requires the 'cmp' instruction to have a length prefix here:

arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl') cmp $0xffffffff,-24(%ebp) ^

Make this a 32-bit comparison, which it was clearly meant to be.

Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Thomas Gleixner tglx@linutronix.de Reviewed-by: Nick Desaulniers ndesaulniers@google.com Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/math-emu/wm_sqrt.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/math-emu/wm_sqrt.S b/arch/x86/math-emu/wm_sqrt.S index 3b2b58164ec18..40526dd85137b 100644 --- a/arch/x86/math-emu/wm_sqrt.S +++ b/arch/x86/math-emu/wm_sqrt.S @@ -209,7 +209,7 @@ sqrt_stage_2_finish:

#ifdef PARANOID /* It should be possible to get here only if the arg is ffff....ffff */ - cmp $0xffffffff,FPU_fsqrt_arg_1 + cmpl $0xffffffff,FPU_fsqrt_arg_1 jnz sqrt_stage_2_error #endif /* PARANOID */

From: Qi Liu liuqi115@huawei.com

[ Upstream commit f32ed8eb0e3f0d0ef4ddb854554d60ca5863a9f9 ]

Forcefully unbinding PMU drivers during perf sampling will lead to a kernel panic, because the perf upper-layer framework call a NULL pointer in this situation.

To solve this issue, "suppress_bind_attrs" should be set to true, so that bind/unbind can be disabled via sysfs and prevent unbinding PMU drivers during perf sampling.

Signed-off-by: Qi Liu liuqi115@huawei.com Reviewed-by: John Garry john.garry@huawei.com Link: https://lore.kernel.org/r/1594975763-32966-1-git-send-email-liuqi115@huawei.... Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/perf/arm-cci.c | 1 + drivers/perf/arm-ccn.c | 1 + drivers/perf/arm_dsu_pmu.c | 1 + drivers/perf/arm_smmuv3_pmu.c | 1 + drivers/perf/arm_spe_pmu.c | 1 + drivers/perf/fsl_imx8_ddr_perf.c | 1 + drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c | 1 + drivers/perf/hisilicon/hisi_uncore_hha_pmu.c | 1 + drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c | 1 + drivers/perf/qcom_l2_pmu.c | 1 + drivers/perf/qcom_l3_pmu.c | 1 + drivers/perf/thunderx2_pmu.c | 1 + drivers/perf/xgene_pmu.c | 1 + 13 files changed, 13 insertions(+)

diff --git a/drivers/perf/arm-cci.c b/drivers/perf/arm-cci.c index 1b8e337a29cac..87c4be9dd4125 100644 --- a/drivers/perf/arm-cci.c +++ b/drivers/perf/arm-cci.c @@ -1718,6 +1718,7 @@ static struct platform_driver cci_pmu_driver = { .driver = { .name = DRIVER_NAME, .of_match_table = arm_cci_pmu_matches, + .suppress_bind_attrs = true, }, .probe = cci_pmu_probe, .remove = cci_pmu_remove, diff --git a/drivers/perf/arm-ccn.c b/drivers/perf/arm-ccn.c index d50edef91f59b..7b7d23f257139 100644 --- a/drivers/perf/arm-ccn.c +++ b/drivers/perf/arm-ccn.c @@ -1545,6 +1545,7 @@ static struct platform_driver arm_ccn_driver = { .driver = { .name = "arm-ccn", .of_match_table = arm_ccn_match, + .suppress_bind_attrs = true, }, .probe = arm_ccn_probe, .remove = arm_ccn_remove, diff --git a/drivers/perf/arm_dsu_pmu.c b/drivers/perf/arm_dsu_pmu.c index 70968c8c09d7f..4594e2ed13d59 100644 --- a/drivers/perf/arm_dsu_pmu.c +++ b/drivers/perf/arm_dsu_pmu.c @@ -759,6 +759,7 @@ static struct platform_driver dsu_pmu_driver = { .driver = { .name = DRVNAME, .of_match_table = of_match_ptr(dsu_pmu_of_match), + .suppress_bind_attrs = true, }, .probe = dsu_pmu_device_probe, .remove = dsu_pmu_device_remove, diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c index 90caba56dfbc1..4cdb35d166acc 100644 --- a/drivers/perf/arm_smmuv3_pmu.c +++ b/drivers/perf/arm_smmuv3_pmu.c @@ -860,6 +860,7 @@ static void smmu_pmu_shutdown(struct platform_device *pdev) static struct platform_driver smmu_pmu_driver = { .driver = { .name = "arm-smmu-v3-pmcg", + .suppress_bind_attrs = true, }, .probe = smmu_pmu_probe, .remove = smmu_pmu_remove, diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c index b72c048525990..c5418fd3122c2 100644 --- a/drivers/perf/arm_spe_pmu.c +++ b/drivers/perf/arm_spe_pmu.c @@ -1228,6 +1228,7 @@ static struct platform_driver arm_spe_pmu_driver = { .driver = { .name = DRVNAME, .of_match_table = of_match_ptr(arm_spe_pmu_of_match), + .suppress_bind_attrs = true, }, .probe = arm_spe_pmu_device_probe, .remove = arm_spe_pmu_device_remove, diff --git a/drivers/perf/fsl_imx8_ddr_perf.c b/drivers/perf/fsl_imx8_ddr_perf.c index 2aed2d96f8ae7..397540a4b799c 100644 --- a/drivers/perf/fsl_imx8_ddr_perf.c +++ b/drivers/perf/fsl_imx8_ddr_perf.c @@ -707,6 +707,7 @@ static struct platform_driver imx_ddr_pmu_driver = { .driver = { .name = "imx-ddr-pmu", .of_match_table = imx_ddr_pmu_dt_ids, + .suppress_bind_attrs = true, }, .probe = ddr_perf_probe, .remove = ddr_perf_remove, diff --git a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c index c65da06abb041..3418527366408 100644 --- a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c @@ -417,6 +417,7 @@ static struct platform_driver hisi_ddrc_pmu_driver = { .driver = { .name = "hisi_ddrc_pmu", .acpi_match_table = ACPI_PTR(hisi_ddrc_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = hisi_ddrc_pmu_probe, .remove = hisi_ddrc_pmu_remove, diff --git a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c index ee6e6a1c390a0..375c4737a088a 100644 --- a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c @@ -429,6 +429,7 @@ static struct platform_driver hisi_hha_pmu_driver = { .driver = { .name = "hisi_hha_pmu", .acpi_match_table = ACPI_PTR(hisi_hha_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = hisi_hha_pmu_probe, .remove = hisi_hha_pmu_remove, diff --git a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c index c8b98d3a8432a..44e8a660c5f52 100644 --- a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c @@ -419,6 +419,7 @@ static struct platform_driver hisi_l3c_pmu_driver = { .driver = { .name = "hisi_l3c_pmu", .acpi_match_table = ACPI_PTR(hisi_l3c_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = hisi_l3c_pmu_probe, .remove = hisi_l3c_pmu_remove, diff --git a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c index 21d6991dbe0ba..4da37f650f983 100644 --- a/drivers/perf/qcom_l2_pmu.c +++ b/drivers/perf/qcom_l2_pmu.c @@ -1028,6 +1028,7 @@ static struct platform_driver l2_cache_pmu_driver = { .driver = { .name = "qcom-l2cache-pmu", .acpi_match_table = ACPI_PTR(l2_cache_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = l2_cache_pmu_probe, .remove = l2_cache_pmu_remove, diff --git a/drivers/perf/qcom_l3_pmu.c b/drivers/perf/qcom_l3_pmu.c index 656e830798d9e..9ddb577c542b5 100644 --- a/drivers/perf/qcom_l3_pmu.c +++ b/drivers/perf/qcom_l3_pmu.c @@ -814,6 +814,7 @@ static struct platform_driver qcom_l3_cache_pmu_driver = { .driver = { .name = "qcom-l3cache-pmu", .acpi_match_table = ACPI_PTR(qcom_l3_cache_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = qcom_l3_cache_pmu_probe, }; diff --git a/drivers/perf/thunderx2_pmu.c b/drivers/perf/thunderx2_pmu.c index 51b31d6ff2c4c..aac9823b0c6bb 100644 --- a/drivers/perf/thunderx2_pmu.c +++ b/drivers/perf/thunderx2_pmu.c @@ -1017,6 +1017,7 @@ static struct platform_driver tx2_uncore_driver = { .driver = { .name = "tx2-uncore-pmu", .acpi_match_table = ACPI_PTR(tx2_uncore_acpi_match), + .suppress_bind_attrs = true, }, .probe = tx2_uncore_probe, .remove = tx2_uncore_remove, diff --git a/drivers/perf/xgene_pmu.c b/drivers/perf/xgene_pmu.c index 46ee6807d533a..edac28cd25ddc 100644 --- a/drivers/perf/xgene_pmu.c +++ b/drivers/perf/xgene_pmu.c @@ -1975,6 +1975,7 @@ static struct platform_driver xgene_pmu_driver = { .name = "xgene-pmu", .of_match_table = xgene_pmu_of_match, .acpi_match_table = ACPI_PTR(xgene_pmu_acpi_match), + .suppress_bind_attrs = true, }, };

From: Arvind Sankar nivedita@alum.mit.edu

[ Upstream commit da05b143a308bd6a7a444401f9732678ae63fc70 ]

vmlinux-objs-y is added to targets, which currently means that the EFI stub gets added to the targets as well. It shouldn't be added since it is built elsewhere.

This confuses Makefile.build which interprets the EFI stub as a target $(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a and will create drivers/firmware/efi/libstub/ underneath arch/x86/boot/compressed, to hold this supposed target, if building out-of-tree. [0]

Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y.

[0] See scripts/Makefile.build near the end: # Create directories for object files if they do not exist

Signed-off-by: Arvind Sankar nivedita@alum.mit.edu Signed-off-by: Thomas Gleixner tglx@linutronix.de Reviewed-by: Masahiro Yamada masahiroy@kernel.org Acked-by: Ard Biesheuvel ardb@kernel.org Link: https://lkml.kernel.org/r/20200715032631.1562882-1-nivedita@alum.mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/boot/compressed/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -88,8 +88,8 @@ endif

vmlinux-objs-$(CONFIG_ACPI) += $(obj)/acpi.o

-vmlinux-objs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_thunk_$(BITS).o +efi-obj-$(CONFIG_EFI_STUB) = $(objtree)/drivers/firmware/efi/libstub/lib.a

# The compressed kernel is built with -fPIC/-fPIE so that a boot loader # can place it anywhere in memory and it will still run. However, since @@ -113,7 +113,7 @@ endef quiet_cmd_check-and-link-vmlinux = LD $@ cmd_check-and-link-vmlinux = $(cmd_check_data_rel); $(cmd_ld)

-$(obj)/vmlinux: $(vmlinux-objs-y) FORCE +$(obj)/vmlinux: $(vmlinux-objs-y) $(efi-obj-y) FORCE $(call if_changed,check-and-link-vmlinux)

OBJCOPYFLAGS_vmlinux.bin := -R .comment -S

From: Chunfeng Yun chunfeng.yun@mediatek.com

commit 5ce1a24dd98c00a57a8fa13660648abf7e08e3ef upstream.

The wMaxPacketSize field of endpoint descriptor may be zero as default value in alternate interface, and they are not actually selected when start stream, so skip them when try to allocate bandwidth.

Cc: stable stable@vger.kernel.org Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller") Signed-off-by: Chunfeng Yun chunfeng.yun@mediatek.com Link: https://lore.kernel.org/r/1594360672-2076-1-git-send-email-chunfeng.yun@medi... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/host/xhci-mtk-sch.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -557,6 +557,10 @@ static bool need_bw_sch(struct usb_host_ if (is_fs_or_ls(speed) && !has_tt) return false;

+ /* skip endpoint with zero maxpkt */ + if (usb_endpoint_maxp(&ep->desc) == 0) + return false; + return true; }

From: Forest Crossman cyrozap@gmail.com

commit dbb0897e805f2ab1b8bc358f6c3d878a376b8897 upstream.

The ASM2142/ASM3142 (same PCI IDs) does not support full 64-bit DMA addresses, which can cause silent memory corruption or IOMMU errors on platforms that use the upper bits. Add the XHCI_NO_64BIT_SUPPORT quirk to fix this issue.

Signed-off-by: Forest Crossman cyrozap@gmail.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200717112734.328432-1-cyrozap@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/host/xhci-pci.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -255,6 +255,9 @@ static void xhci_pci_quirks(struct devic if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1142) xhci->quirks |= XHCI_TRUST_TX_LENGTH; + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && + pdev->device == 0x2142) + xhci->quirks |= XHCI_NO_64BIT_SUPPORT;

if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)

From: Johannes Berg johannes.berg@intel.com

commit fbb1461ad1d6eacca9beb69a2f3ce1b5398d399b upstream.

iwl_mvm_free_inactive_queue() will sleep in synchronize_net() under some circumstances, so don't call it under RCU. There doesn't appear to be a need for RCU protection around this particular call.

Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/iwlwifi.20200403112332.0f49448c133d.I17fd308bc4a94... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1184,17 +1184,15 @@ static int iwl_mvm_inactivity_check(stru for_each_set_bit(i, &changetid_queues, IWL_MAX_HW_QUEUES) iwl_mvm_change_queue_tid(mvm, i);

+ rcu_read_unlock(); + if (free_queue >= 0 && alloc_for_sta != IWL_MVM_INVALID_STA) { ret = iwl_mvm_free_inactive_queue(mvm, free_queue, queue_owner, alloc_for_sta); - if (ret) { - rcu_read_unlock(); + if (ret) return ret; - } }

- rcu_read_unlock(); - return free_queue; }

From: Rustam Kovhaev rkovhaev@gmail.com

commit faaff9765664009c1c7c65551d32e9ed3b1dda8f upstream.

As syzkaller detected, wlan-ng driver does not do sanity check of endpoints in prism2sta_probe_usb(), add check for xfer direction and type

Reported-and-tested-by: syzbot+c2a1fa67c02faa0de723@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=c2a1fa67c02faa0de723 Signed-off-by: Rustam Kovhaev rkovhaev@gmail.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200722161052.999754-1-rkovhaev@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/staging/wlan-ng/prism2usb.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/drivers/staging/wlan-ng/prism2usb.c +++ b/drivers/staging/wlan-ng/prism2usb.c @@ -61,11 +61,25 @@ static int prism2sta_probe_usb(struct us const struct usb_device_id *id) { struct usb_device *dev; - + const struct usb_endpoint_descriptor *epd; + const struct usb_host_interface *iface_desc = interface->cur_altsetting; struct wlandevice *wlandev = NULL; struct hfa384x *hw = NULL; int result = 0;

+ if (iface_desc->desc.bNumEndpoints != 2) { + result = -ENODEV; + goto failed; + } + + result = -EINVAL; + epd = &iface_desc->endpoint[1].desc; + if (!usb_endpoint_is_bulk_in(epd)) + goto failed; + epd = &iface_desc->endpoint[2].desc; + if (!usb_endpoint_is_bulk_out(epd)) + goto failed; + dev = interface_to_usbdev(interface); wlandev = create_wlan(); if (!wlandev) {

From: Ian Abbott abbotti@mev.co.uk

commit f07804ec77d77f8a9dcf570a24154e17747bc82f upstream.

`ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions for the "interrupt" subdevice. When `data[0]` is `INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger. When `data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising and falling edge detection for the digital trigger, using a base channel number (or shift amount) in `data[3]`, a rising edge bitmask in `data[4]` and falling edge bitmask in `data[5]`.

If the base channel number (shift amount) is greater than or equal to the number of channels (24) of the digital input subdevice, there are no changes to the rising and falling edges, so the mask of channels to be changed can be set to 0, otherwise the mask of channels to be changed, and the rising and falling edge bitmasks are shifted by the base channel number before calling `ni6527_set_edge_detection()` to change the appropriate registers. Unfortunately, the code is comparing the base channel (shift amount) to the interrupt subdevice's number of channels (1) instead of the digital input subdevice's number of channels (24). Fix it by comparing to 32 because all shift amounts for an `unsigned int` must be less than that and everything from bit 24 upwards is ignored by `ni6527_set_edge_detection()` anyway.

Fixes: 110f9e687c1a8 ("staging: comedi: ni_6527: support INSN_CONFIG_DIGITAL_TRIG") Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Ian Abbott abbotti@mev.co.uk Link: https://lore.kernel.org/r/20200717145257.112660-2-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/staging/comedi/drivers/ni_6527.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/comedi/drivers/ni_6527.c +++ b/drivers/staging/comedi/drivers/ni_6527.c @@ -332,7 +332,7 @@ static int ni6527_intr_insn_config(struc case COMEDI_DIGITAL_TRIG_ENABLE_EDGES: /* check shift amount */ shift = data[3]; - if (shift >= s->n_chan) { + if (shift >= 32) { mask = 0; rising = 0; falling = 0;

From: Ian Abbott abbotti@mev.co.uk

commit 926234f1b8434c4409aa4c53637aa3362ca07cea upstream.

The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this.

Fixes: 1e15687ea472 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions") Cc: stable@vger.kernel.org #3.17+ Signed-off-by: Ian Abbott abbotti@mev.co.uk Link: https://lore.kernel.org/r/20200717145257.112660-4-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/staging/comedi/drivers/addi_apci_1564.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)

--- a/drivers/staging/comedi/drivers/addi_apci_1564.c +++ b/drivers/staging/comedi/drivers/addi_apci_1564.c @@ -331,14 +331,22 @@ static int apci1564_cos_insn_config(stru unsigned int *data) { struct apci1564_private *devpriv = dev->private; - unsigned int shift, oldmask; + unsigned int shift, oldmask, himask, lomask;

switch (data[0]) { case INSN_CONFIG_DIGITAL_TRIG: if (data[1] != 0) return -EINVAL; shift = data[3]; - oldmask = (1U << shift) - 1; + if (shift < 32) { + oldmask = (1U << shift) - 1; + himask = data[4] << shift; + lomask = data[5] << shift; + } else { + oldmask = 0xffffffffu; + himask = 0; + lomask = 0; + } switch (data[2]) { case COMEDI_DIGITAL_TRIG_DISABLE: devpriv->ctrl = 0; @@ -362,8 +370,8 @@ static int apci1564_cos_insn_config(stru devpriv->mode2 &= oldmask; } /* configure specified channels */ - devpriv->mode1 |= data[4] << shift; - devpriv->mode2 |= data[5] << shift; + devpriv->mode1 |= himask; + devpriv->mode2 |= lomask; break; case COMEDI_DIGITAL_TRIG_ENABLE_LEVELS: if (devpriv->ctrl != (APCI1564_DI_IRQ_ENA | @@ -380,8 +388,8 @@ static int apci1564_cos_insn_config(stru devpriv->mode2 &= oldmask; } /* configure specified channels */ - devpriv->mode1 |= data[4] << shift; - devpriv->mode2 |= data[5] << shift; + devpriv->mode1 |= himask; + devpriv->mode2 |= lomask; break; default: return -EINVAL;

From: Yang Yingliang yangyingliang@huawei.com

commit f4c23a140d80ef5e6d3d1f8f57007649014b60fa upstream.

I got null-ptr-deref in serial8250_start_tx():

[ 78.114630] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 78.123778] Mem abort info: [ 78.126560] ESR = 0x86000007 [ 78.129603] EC = 0x21: IABT (current EL), IL = 32 bits [ 78.134891] SET = 0, FnV = 0 [ 78.137933] EA = 0, S1PTW = 0 [ 78.141064] user pgtable: 64k pages, 48-bit VAs, pgdp=00000027d41a8600 [ 78.147562] [0000000000000000] pgd=00000027893f0003, p4d=00000027893f0003, pud=00000027893f0003, pmd=00000027c9a20003, pte=0000000000000000 [ 78.160029] Internal error: Oops: 86000007 [#1] SMP [ 78.164886] Modules linked in: sunrpc vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce ses enclosure sg sbsa_gwdt ipmi_ssif spi_dw_mmio sch_fq_codel vhost_net tun vhost vhost_iotlb tap ip_tables ext4 mbcache jbd2 ahci hisi_sas_v3_hw libahci hisi_sas_main libsas hns3 scsi_transport_sas hclge libata megaraid_sas ipmi_si hnae3 ipmi_devintf ipmi_msghandler br_netfilter bridge stp llc nvme nvme_core xt_sctp sctp libcrc32c dm_mod nbd [ 78.207383] CPU: 11 PID: 23258 Comm: null-ptr Not tainted 5.8.0-rc6+ #48 [ 78.214056] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B210.01 03/12/2020 [ 78.222888] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--) [ 78.228435] pc : 0x0 [ 78.230618] lr : serial8250_start_tx+0x160/0x260 [ 78.235215] sp : ffff800062eefb80 [ 78.238517] x29: ffff800062eefb80 x28: 0000000000000fff [ 78.243807] x27: ffff800062eefd80 x26: ffff202fd83b3000 [ 78.249098] x25: ffff800062eefd80 x24: ffff202fd83b3000 [ 78.254388] x23: ffff002fc5e50be8 x22: 0000000000000002 [ 78.259679] x21: 0000000000000001 x20: 0000000000000000 [ 78.264969] x19: ffffa688827eecc8 x18: 0000000000000000 [ 78.270259] x17: 0000000000000000 x16: 0000000000000000 [ 78.275550] x15: ffffa68881bc67a8 x14: 00000000000002e6 [ 78.280841] x13: ffffa68881bc67a8 x12: 000000000000c539 [ 78.286131] x11: d37a6f4de9bd37a7 x10: ffffa68881cccff0 [ 78.291421] x9 : ffffa68881bc6000 x8 : ffffa688819daa88 [ 78.296711] x7 : ffffa688822a0f20 x6 : ffffa688819e0000 [ 78.302002] x5 : ffff800062eef9d0 x4 : ffffa68881e707a8 [ 78.307292] x3 : 0000000000000000 x2 : 0000000000000002 [ 78.312582] x1 : 0000000000000001 x0 : ffffa688827eecc8 [ 78.317873] Call trace: [ 78.320312] 0x0 [ 78.322147] __uart_start.isra.9+0x64/0x78 [ 78.326229] uart_start+0xb8/0x1c8 [ 78.329620] uart_flush_chars+0x24/0x30 [ 78.333442] n_tty_receive_buf_common+0x7b0/0xc30 [ 78.338128] n_tty_receive_buf+0x44/0x2c8 [ 78.342122] tty_ioctl+0x348/0x11f8 [ 78.345599] ksys_ioctl+0xd8/0xf8 [ 78.348903] __arm64_sys_ioctl+0x2c/0xc8 [ 78.352812] el0_svc_common.constprop.2+0x88/0x1b0 [ 78.357583] do_el0_svc+0x44/0xd0 [ 78.360887] el0_sync_handler+0x14c/0x1d0 [ 78.364880] el0_sync+0x140/0x180 [ 78.368185] Code: bad PC value

SERIAL_PORT_DFNS is not defined on each arch, if it's not defined, serial8250_set_defaults() won't be called in serial8250_isa_init_ports(), so the p->serial_in pointer won't be initialized, and it leads a null-ptr-deref. Fix this problem by calling serial8250_set_defaults() after init uart port.

Signed-off-by: Yang Yingliang yangyingliang@huawei.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200721143852.4058352-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/tty/serial/8250/8250_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -524,6 +524,7 @@ static void __init serial8250_isa_init_p */ up->mcr_mask = ~ALPHA_KLUDGE_MCR; up->mcr_force = ALPHA_KLUDGE_MCR; + serial8250_set_defaults(up); }

/* chain base port ops to support Remote Supervisor Adapter */ @@ -547,7 +548,6 @@ static void __init serial8250_isa_init_p port->membase = old_serial_port[i].iomem_base; port->iotype = old_serial_port[i].io_type; port->regshift = old_serial_port[i].iomem_reg_shift; - serial8250_set_defaults(up);

port->irqflags |= irqflag; if (serial8250_isa_config != NULL)

From: Georgi Djakov georgi.djakov@linaro.org

commit 92d232d176041db5b033dd7b7f7f2cf343f82237 upstream.

The buswidth of the pcnoc_s_* nodes is actually not 8, but 4 bytes. Let's fix it.

Reported-by: Jun Nie jun.nie@linaro.org Reviewed-by: Mike Tipton mdtipton@codeaurora.org Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver") Link: https://lore.kernel.org/r/20200709130004.12462-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov georgi.djakov@linaro.org Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200723083735.5616-3-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/interconnect/qcom/msm8916.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/interconnect/qcom/msm8916.c +++ b/drivers/interconnect/qcom/msm8916.c @@ -197,13 +197,13 @@ DEFINE_QNODE(pcnoc_int_0, MSM8916_PNOC_I DEFINE_QNODE(pcnoc_int_1, MSM8916_PNOC_INT_1, 8, -1, -1, MSM8916_PNOC_SNOC_MAS); DEFINE_QNODE(pcnoc_m_0, MSM8916_PNOC_MAS_0, 8, -1, -1, MSM8916_PNOC_INT_0); DEFINE_QNODE(pcnoc_m_1, MSM8916_PNOC_MAS_1, 8, -1, -1, MSM8916_PNOC_SNOC_MAS); -DEFINE_QNODE(pcnoc_s_0, MSM8916_PNOC_SLV_0, 8, -1, -1, MSM8916_SLAVE_CLK_CTL, MSM8916_SLAVE_TLMM, MSM8916_SLAVE_TCSR, MSM8916_SLAVE_SECURITY, MSM8916_SLAVE_MSS); -DEFINE_QNODE(pcnoc_s_1, MSM8916_PNOC_SLV_1, 8, -1, -1, MSM8916_SLAVE_IMEM_CFG, MSM8916_SLAVE_CRYPTO_0_CFG, MSM8916_SLAVE_MSG_RAM, MSM8916_SLAVE_PDM, MSM8916_SLAVE_PRNG); -DEFINE_QNODE(pcnoc_s_2, MSM8916_PNOC_SLV_2, 8, -1, -1, MSM8916_SLAVE_SPDM, MSM8916_SLAVE_BOOT_ROM, MSM8916_SLAVE_BIMC_CFG, MSM8916_SLAVE_PNOC_CFG, MSM8916_SLAVE_PMIC_ARB); -DEFINE_QNODE(pcnoc_s_3, MSM8916_PNOC_SLV_3, 8, -1, -1, MSM8916_SLAVE_MPM, MSM8916_SLAVE_SNOC_CFG, MSM8916_SLAVE_RBCPR_CFG, MSM8916_SLAVE_QDSS_CFG, MSM8916_SLAVE_DEHR_CFG); -DEFINE_QNODE(pcnoc_s_4, MSM8916_PNOC_SLV_4, 8, -1, -1, MSM8916_SLAVE_VENUS_CFG, MSM8916_SLAVE_CAMERA_CFG, MSM8916_SLAVE_DISPLAY_CFG); -DEFINE_QNODE(pcnoc_s_8, MSM8916_PNOC_SLV_8, 8, -1, -1, MSM8916_SLAVE_USB_HS, MSM8916_SLAVE_SDCC_1, MSM8916_SLAVE_BLSP_1); -DEFINE_QNODE(pcnoc_s_9, MSM8916_PNOC_SLV_9, 8, -1, -1, MSM8916_SLAVE_SDCC_2, MSM8916_SLAVE_LPASS, MSM8916_SLAVE_GRAPHICS_3D_CFG); +DEFINE_QNODE(pcnoc_s_0, MSM8916_PNOC_SLV_0, 4, -1, -1, MSM8916_SLAVE_CLK_CTL, MSM8916_SLAVE_TLMM, MSM8916_SLAVE_TCSR, MSM8916_SLAVE_SECURITY, MSM8916_SLAVE_MSS); +DEFINE_QNODE(pcnoc_s_1, MSM8916_PNOC_SLV_1, 4, -1, -1, MSM8916_SLAVE_IMEM_CFG, MSM8916_SLAVE_CRYPTO_0_CFG, MSM8916_SLAVE_MSG_RAM, MSM8916_SLAVE_PDM, MSM8916_SLAVE_PRNG); +DEFINE_QNODE(pcnoc_s_2, MSM8916_PNOC_SLV_2, 4, -1, -1, MSM8916_SLAVE_SPDM, MSM8916_SLAVE_BOOT_ROM, MSM8916_SLAVE_BIMC_CFG, MSM8916_SLAVE_PNOC_CFG, MSM8916_SLAVE_PMIC_ARB); +DEFINE_QNODE(pcnoc_s_3, MSM8916_PNOC_SLV_3, 4, -1, -1, MSM8916_SLAVE_MPM, MSM8916_SLAVE_SNOC_CFG, MSM8916_SLAVE_RBCPR_CFG, MSM8916_SLAVE_QDSS_CFG, MSM8916_SLAVE_DEHR_CFG); +DEFINE_QNODE(pcnoc_s_4, MSM8916_PNOC_SLV_4, 4, -1, -1, MSM8916_SLAVE_VENUS_CFG, MSM8916_SLAVE_CAMERA_CFG, MSM8916_SLAVE_DISPLAY_CFG); +DEFINE_QNODE(pcnoc_s_8, MSM8916_PNOC_SLV_8, 4, -1, -1, MSM8916_SLAVE_USB_HS, MSM8916_SLAVE_SDCC_1, MSM8916_SLAVE_BLSP_1); +DEFINE_QNODE(pcnoc_s_9, MSM8916_PNOC_SLV_9, 4, -1, -1, MSM8916_SLAVE_SDCC_2, MSM8916_SLAVE_LPASS, MSM8916_SLAVE_GRAPHICS_3D_CFG); DEFINE_QNODE(pcnoc_snoc_mas, MSM8916_PNOC_SNOC_MAS, 8, 29, -1, MSM8916_PNOC_SNOC_SLV); DEFINE_QNODE(pcnoc_snoc_slv, MSM8916_PNOC_SNOC_SLV, 8, -1, 45, MSM8916_SNOC_INT_0, MSM8916_SNOC_INT_BIMC, MSM8916_SNOC_INT_1); DEFINE_QNODE(qdss_int, MSM8916_SNOC_QDSS_INT, 8, -1, -1, MSM8916_SNOC_INT_0, MSM8916_SNOC_INT_BIMC);

From: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp

commit 033724d6864245a11f8e04c066002e6ad22b3fd0 upstream.

syzbot is reporting general protection fault in bitfill_aligned() [1] caused by integer underflow in bit_clear_margins(). The cause of this problem is when and how do_vc_resize() updates vc->vc_{cols,rows}.

If vc_do_resize() fails (e.g. kzalloc() fails) when var.xres or var.yres is going to shrink, vc->vc_{cols,rows} will not be updated. This allows bit_clear_margins() to see info->var.xres < (vc->vc_cols * cw) or info->var.yres < (vc->vc_rows * ch). Unexpectedly large rw or bh will try to overrun the __iomem region and causes general protection fault.

Also, vc_resize(vc, 0, 0) does not set vc->vc_{cols,rows} = 0 due to

new_cols = (cols ? cols : vc->vc_cols); new_rows = (lines ? lines : vc->vc_rows);

exception. Since cols and lines are calculated as

cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres); rows = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres); cols /= vc->vc_font.width; rows /= vc->vc_font.height; vc_resize(vc, cols, rows);

in fbcon_modechanged(), var.xres < vc->vc_font.width makes cols = 0 and var.yres < vc->vc_font.height makes rows = 0. This means that

const int fd = open("/dev/fb0", O_ACCMODE); struct fb_var_screeninfo var = { }; ioctl(fd, FBIOGET_VSCREENINFO, &var); var.xres = var.yres = 1; ioctl(fd, FBIOPUT_VSCREENINFO, &var);

easily reproduces integer underflow bug explained above.

Of course, callers of vc_resize() are not handling vc_do_resize() failure is bad. But we can't avoid vc_resize(vc, 0, 0) which returns 0. Therefore, as a band-aid workaround, this patch checks integer underflow in "struct fbcon_ops"->clear_margins call, assuming that vc->vc_cols * vc->vc_font.width and vc->vc_rows * vc->vc_font.heigh do not cause integer overflow.

[1] https://syzkaller.appspot.com/bug?id=a565882df74fa76f10d3a6fec4be31098dbb37c...

Reported-and-tested-by: syzbot syzbot+e5fd3e65515b48c02a30@syzkaller.appspotmail.com Signed-off-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Acked-by: Daniel Vetter daniel.vetter@ffwll.ch Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200715015102.3814-1-penguin-kernel@I-love.SAKURA... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/video/fbdev/core/bitblit.c | 4 ++-- drivers/video/fbdev/core/fbcon_ccw.c | 4 ++-- drivers/video/fbdev/core/fbcon_cw.c | 4 ++-- drivers/video/fbdev/core/fbcon_ud.c | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/video/fbdev/core/bitblit.c +++ b/drivers/video/fbdev/core/bitblit.c @@ -216,7 +216,7 @@ static void bit_clear_margins(struct vc_ region.color = color; region.rop = ROP_COPY;

- if (rw && !bottom_only) { + if ((int) rw > 0 && !bottom_only) { region.dx = info->var.xoffset + rs; region.dy = 0; region.width = rw; @@ -224,7 +224,7 @@ static void bit_clear_margins(struct vc_ info->fbops->fb_fillrect(info, &region); }

- if (bh) { + if ((int) bh > 0) { region.dx = info->var.xoffset; region.dy = info->var.yoffset + bs; region.width = rs; --- a/drivers/video/fbdev/core/fbcon_ccw.c +++ b/drivers/video/fbdev/core/fbcon_ccw.c @@ -201,7 +201,7 @@ static void ccw_clear_margins(struct vc_ region.color = color; region.rop = ROP_COPY;

- if (rw && !bottom_only) { + if ((int) rw > 0 && !bottom_only) { region.dx = 0; region.dy = info->var.yoffset; region.height = rw; @@ -209,7 +209,7 @@ static void ccw_clear_margins(struct vc_ info->fbops->fb_fillrect(info, &region); }

- if (bh) { + if ((int) bh > 0) { region.dx = info->var.xoffset + bs; region.dy = 0; region.height = info->var.yres_virtual; --- a/drivers/video/fbdev/core/fbcon_cw.c +++ b/drivers/video/fbdev/core/fbcon_cw.c @@ -184,7 +184,7 @@ static void cw_clear_margins(struct vc_d region.color = color; region.rop = ROP_COPY;

- if (rw && !bottom_only) { + if ((int) rw > 0 && !bottom_only) { region.dx = 0; region.dy = info->var.yoffset + rs; region.height = rw; @@ -192,7 +192,7 @@ static void cw_clear_margins(struct vc_d info->fbops->fb_fillrect(info, &region); }

- if (bh) { + if ((int) bh > 0) { region.dx = info->var.xoffset; region.dy = info->var.yoffset; region.height = info->var.yres; --- a/drivers/video/fbdev/core/fbcon_ud.c +++ b/drivers/video/fbdev/core/fbcon_ud.c @@ -231,7 +231,7 @@ static void ud_clear_margins(struct vc_d region.color = color; region.rop = ROP_COPY;

- if (rw && !bottom_only) { + if ((int) rw > 0 && !bottom_only) { region.dy = 0; region.dx = info->var.xoffset; region.width = rw; @@ -239,7 +239,7 @@ static void ud_clear_margins(struct vc_d info->fbops->fb_fillrect(info, &region); }

- if (bh) { + if ((int) bh > 0) { region.dy = info->var.yoffset; region.dx = info->var.xoffset; region.height = bh;

From: Fangrui Song maskray@google.com

commit ca9b31f6bb9c6aa9b4e5f0792f39a97bbffb8c51 upstream.

When CROSS_COMPILE is set (e.g. aarch64-linux-gnu-), if $(CROSS_COMPILE)elfedit is found at /usr/bin/aarch64-linux-gnu-elfedit, GCC_TOOLCHAIN_DIR will be set to /usr/bin/. --prefix= will be set to /usr/bin/ and Clang as of 11 will search for both $(prefix)aarch64-linux-gnu-$needle and $(prefix)$needle.

GCC searchs for $(prefix)aarch64-linux-gnu/$version/$needle, $(prefix)aarch64-linux-gnu/$needle and $(prefix)$needle. In practice, $(prefix)aarch64-linux-gnu/$needle rarely contains executables.

To better model how GCC's -B/--prefix takes in effect in practice, newer Clang (since https://github.com/llvm/llvm-project/commit/3452a0d8c17f7166f479706b293caf6a...) only searches for $(prefix)$needle. Currently it will find /usr/bin/as instead of /usr/bin/aarch64-linux-gnu-as.

Set --prefix= to $(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE)) (/usr/bin/aarch64-linux-gnu-) so that newer Clang can find the appropriate cross compiling GNU as (when -no-integrated-as is in effect).

Cc: stable@vger.kernel.org Reported-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Fangrui Song maskray@google.com Reviewed-by: Nathan Chancellor natechancellor@gmail.com Tested-by: Nathan Chancellor natechancellor@gmail.com Tested-by: Nick Desaulniers ndesaulniers@google.com Link: https://github.com/ClangBuiltLinux/linux/issues/1099 Reviewed-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Masahiro Yamada masahiroy@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Makefile +++ b/Makefile @@ -549,7 +549,7 @@ ifneq ($(shell $(CC) --version 2>&1 | he ifneq ($(CROSS_COMPILE),) CLANG_FLAGS += --target=$(notdir $(CROSS_COMPILE:%-=%)) GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE)elfedit)) -CLANG_FLAGS += --prefix=$(GCC_TOOLCHAIN_DIR) +CLANG_FLAGS += --prefix=$(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE)) GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..) endif ifneq ($(GCC_TOOLCHAIN),)

From: Chengguang Xu cgxu519@mykernel.net

commit 3bef735ad7b7d987069181e7b58588043cbd1509 upstream.

After commit fdc85222d58e ("kernfs: kvmalloc xattr value instead of kmalloc"), simple xattr entry is allocated with kvmalloc() instead of kmalloc(), so we should release it with kvfree() instead of kfree().

Fixes: fdc85222d58e ("kernfs: kvmalloc xattr value instead of kmalloc") Signed-off-by: Chengguang Xu cgxu519@mykernel.net Signed-off-by: Andrew Morton akpm@linux-foundation.org Acked-by: Hugh Dickins hughd@google.com Acked-by: Tejun Heo tj@kernel.org Cc: Daniel Xu dxu@dxuuu.xyz Cc: Chris Down chris@chrisdown.name Cc: Andreas Dilger adilger@dilger.ca Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Al Viro viro@zeniv.linux.org.uk Cc: stable@vger.kernel.org [5.7] Link: http://lkml.kernel.org/r/20200704051608.15043-1-cgxu519@mykernel.net Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- include/linux/xattr.h | 3 ++- mm/shmem.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/include/linux/xattr.h +++ b/include/linux/xattr.h @@ -15,6 +15,7 @@ #include <linux/slab.h> #include <linux/types.h> #include <linux/spinlock.h> +#include <linux/mm.h> #include <uapi/linux/xattr.h>

struct inode; @@ -94,7 +95,7 @@ static inline void simple_xattrs_free(st

list_for_each_entry_safe(xattr, node, &xattrs->head, list) { kfree(xattr->name); - kfree(xattr); + kvfree(xattr); } }

--- a/mm/shmem.c +++ b/mm/shmem.c @@ -3205,7 +3205,7 @@ static int shmem_initxattrs(struct inode new_xattr->name = kmalloc(XATTR_SECURITY_PREFIX_LEN + len, GFP_KERNEL); if (!new_xattr->name) { - kfree(new_xattr); + kvfree(new_xattr); return -ENOMEM; }

From: Muchun Song songmuchun@bytedance.com

commit d38a2b7a9c939e6d7329ab92b96559ccebf7b135 upstream.

If the kmem_cache refcount is greater than one, we should not mark the root kmem_cache as dying. If we mark the root kmem_cache dying incorrectly, the non-root kmem_cache can never be destroyed. It resulted in memory leak when memcg was destroyed. We can use the following steps to reproduce.

1) Use kmem_cache_create() to create a new kmem_cache named A. 2) Coincidentally, the kmem_cache A is an alias for kmem_cache B, so the refcount of B is just increased. 3) Use kmem_cache_destroy() to destroy the kmem_cache A, just decrease the B's refcount but mark the B as dying. 4) Create a new memory cgroup and alloc memory from the kmem_cache B. It leads to create a non-root kmem_cache for allocating memory. 5) When destroy the memory cgroup created in the step 4), the non-root kmem_cache can never be destroyed.

If we repeat steps 4) and 5), this will cause a lot of memory leak. So only when refcount reach zero, we mark the root kmem_cache as dying.

Fixes: 92ee383f6daa ("mm: fix race between kmem_cache destroy, create and deactivate") Signed-off-by: Muchun Song songmuchun@bytedance.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Reviewed-by: Shakeel Butt shakeelb@google.com Acked-by: Roman Gushchin guro@fb.com Cc: Vlastimil Babka vbabka@suse.cz Cc: Christoph Lameter cl@linux.com Cc: Pekka Enberg penberg@kernel.org Cc: David Rientjes rientjes@google.com Cc: Joonsoo Kim iamjoonsoo.kim@lge.com Cc: Shakeel Butt shakeelb@google.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20200716165103.83462-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- mm/slab_common.c | 35 ++++++++++++++++++++++++++++------- 1 file changed, 28 insertions(+), 7 deletions(-)

--- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -326,6 +326,14 @@ int slab_unmergeable(struct kmem_cache * if (s->refcount < 0) return 1;

+#ifdef CONFIG_MEMCG_KMEM + /* + * Skip the dying kmem_cache. + */ + if (s->memcg_params.dying) + return 1; +#endif + return 0; }

@@ -886,12 +894,15 @@ static int shutdown_memcg_caches(struct return 0; }

-static void flush_memcg_workqueue(struct kmem_cache *s) +static void memcg_set_kmem_cache_dying(struct kmem_cache *s) { spin_lock_irq(&memcg_kmem_wq_lock); s->memcg_params.dying = true; spin_unlock_irq(&memcg_kmem_wq_lock); +}

+static void flush_memcg_workqueue(struct kmem_cache *s) +{ /* * SLAB and SLUB deactivate the kmem_caches through call_rcu. Make * sure all registered rcu callbacks have been invoked. @@ -923,10 +934,6 @@ static inline int shutdown_memcg_caches( { return 0; } - -static inline void flush_memcg_workqueue(struct kmem_cache *s) -{ -} #endif /* CONFIG_MEMCG_KMEM */

void slab_kmem_cache_release(struct kmem_cache *s) @@ -944,8 +951,6 @@ void kmem_cache_destroy(struct kmem_cach if (unlikely(!s)) return;

- flush_memcg_workqueue(s); - get_online_cpus(); get_online_mems();

@@ -955,6 +960,22 @@ void kmem_cache_destroy(struct kmem_cach if (s->refcount) goto out_unlock;

+#ifdef CONFIG_MEMCG_KMEM + memcg_set_kmem_cache_dying(s); + + mutex_unlock(&slab_mutex); + + put_online_mems(); + put_online_cpus(); + + flush_memcg_workqueue(s); + + get_online_cpus(); + get_online_mems(); + + mutex_lock(&slab_mutex); +#endif + err = shutdown_memcg_caches(s); if (!err) err = shutdown_cache(s);

From: Kirill A. Shutemov kirill.shutemov@linux.intel.com

commit 594cced14ad3903166c8b091ff96adac7552f0b3 upstream.

khugepaged has to drop mmap lock several times while collapsing a page. The situation can change while the lock is dropped and we need to re-validate that the VMA is still in place and the PMD is still subject for collapse.

But we miss one corner case: while collapsing an anonymous pages the VMA could be replaced with file VMA. If the file VMA doesn't have any private pages we get NULL pointer dereference:

general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] anon_vma_lock_write include/linux/rmap.h:120 [inline] collapse_huge_page mm/khugepaged.c:1110 [inline] khugepaged_scan_pmd mm/khugepaged.c:1349 [inline] khugepaged_scan_mm_slot mm/khugepaged.c:2110 [inline] khugepaged_do_scan mm/khugepaged.c:2193 [inline] khugepaged+0x3bba/0x5a10 mm/khugepaged.c:2238

The fix is to make sure that the VMA is anonymous in hugepage_vma_revalidate(). The helper is only used for collapsing anonymous pages.

Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Reported-by: syzbot+ed318e8b790ca72c5ad0@syzkaller.appspotmail.com Signed-off-by: Kirill A. Shutemov kirill.shutemov@linux.intel.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Reviewed-by: David Hildenbrand david@redhat.com Acked-by: Yang Shi yang.shi@linux.alibaba.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20200722121439.44328-1-kirill.shutemov@linux.intel.... Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- mm/khugepaged.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/mm/khugepaged.c +++ b/mm/khugepaged.c @@ -873,6 +873,9 @@ static int hugepage_vma_revalidate(struc return SCAN_ADDRESS_RANGE; if (!hugepage_vma_check(vma, vma->vm_flags)) return SCAN_VMA_CHECK; + /* Anon VMA expected */ + if (!vma->anon_vma || vma->vm_ops) + return SCAN_VMA_CHECK; return 0; }