[PATCH AUTOSEL 5.4 01/34] HID: i2c-hid: add Mediacom FlexBook edge13 to descriptor override
From: Federico Ricchiuto fed.ricchiuto@gmail.com
[ Upstream commit 43e666acb79f3d355dd89bf20f4d25d3b15da13e ]
The Mediacom FlexBook edge13 uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list.
Signed-off-by: Federico Ricchiuto fed.ricchiuto@gmail.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c index ec142bc8c1daf..35f3bfc3e6f59 100644 --- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c @@ -373,6 +373,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = { }, .driver_data = (void *)&sipodev_desc }, + { + .ident = "Mediacom FlexBook edge 13", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MEDIACOM"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "FlexBook_edge13-M-FBE13"), + }, + .driver_data = (void *)&sipodev_desc + }, { .ident = "Odys Winbook 13", .matches = {
From: Caiyuan Xie caiyuan.xie@cn.alps.com
[ Upstream commit aa3c439c144f0a465ed1f28f11c772886fb02b35 ]
Add support for devices which that have reports with id == 2
Signed-off-by: Caiyuan Xie caiyuan.xie@cn.alps.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-alps.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c index b2ad319a74b9a..d33f5abc8f64d 100644 --- a/drivers/hid/hid-alps.c +++ b/drivers/hid/hid-alps.c @@ -25,6 +25,7 @@
#define U1_MOUSE_REPORT_ID 0x01 /* Mouse data ReportID */ #define U1_ABSOLUTE_REPORT_ID 0x03 /* Absolute data ReportID */ +#define U1_ABSOLUTE_REPORT_ID_SECD 0x02 /* FW-PTP Absolute data ReportID */ #define U1_FEATURE_REPORT_ID 0x05 /* Feature ReportID */ #define U1_SP_ABSOLUTE_REPORT_ID 0x06 /* Feature ReportID */
@@ -368,6 +369,7 @@ static int u1_raw_event(struct alps_dev *hdata, u8 *data, int size) case U1_FEATURE_REPORT_ID: break; case U1_ABSOLUTE_REPORT_ID: + case U1_ABSOLUTE_REPORT_ID_SECD: for (i = 0; i < hdata->max_fingers; i++) { u8 *contact = &data[i * 5];
From: Rodrigo Rivas Costa rodrigorivascosta@gmail.com
[ Upstream commit 2d3f53a80e4eed078669853a178ed96d88f74143 ]
Using uhid and KASAN this driver crashed because it was getting several connection events where it only expected one. Then the device was added several times to the static device list and it got corrupted.
This patch checks if the device is already in the list before adding it.
Signed-off-by: Rodrigo Rivas Costa rodrigorivascosta@gmail.com Tested-by: Siarhei Vishniakou svv@google.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-steam.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/hid-steam.c b/drivers/hid/hid-steam.c index 6286204d4c560..a3b151b29bd71 100644 --- a/drivers/hid/hid-steam.c +++ b/drivers/hid/hid-steam.c @@ -526,7 +526,8 @@ static int steam_register(struct steam_device *steam) steam_battery_register(steam);
mutex_lock(&steam_devices_lock); - list_add(&steam->list, &steam_devices); + if (list_empty(&steam->list)) + list_add(&steam->list, &steam_devices); mutex_unlock(&steam_devices_lock); }
@@ -552,7 +553,7 @@ static void steam_unregister(struct steam_device *steam) hid_info(steam->hdev, "Steam Controller '%s' disconnected", steam->serial_no); mutex_lock(&steam_devices_lock); - list_del(&steam->list); + list_del_init(&steam->list); mutex_unlock(&steam_devices_lock); steam->serial_no[0] = 0; } @@ -738,6 +739,7 @@ static int steam_probe(struct hid_device *hdev, mutex_init(&steam->mutex); steam->quirks = id->driver_data; INIT_WORK(&steam->work_connect, steam_work_connect_cb); + INIT_LIST_HEAD(&steam->list);
steam->client_hdev = steam_create_client_hid(hdev); if (IS_ERR(steam->client_hdev)) {
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit a5d81646fa294eed57786a9310b06ca48902adf8 ]
The Maxxter KB-BT-001 Bluetooth keyboard, which looks somewhat like the Apple Wireless Keyboard, is using the vendor and product IDs (05AC:0239) of the Apple Wireless Keyboard (2009 ANSI version) <sigh>.
But its F1 - F10 keys are marked as sending F1 - F10, not the special functions hid-apple.c maps them too; and since its descriptors do not contain the HID_UP_CUSTOM | 0x0003 usage apple-hid looks for for the Fn-key, apple_setup_input() never gets called, so F1 - F6 are mapped to key-codes which have not been set in the keybit array causing them to not send any events at all.
The lack of a usage code matching the Fn key in the clone is actually useful as this allows solving this problem in a generic way.
This commits adds a fn_found flag and it adds a input_configured callback which checks if this flag is set once all usages have been mapped. If it is not set, then assume this is a clone and clear the quirks bitmap so that the hid-apple code does not add any special handling to this keyboard.
This fixes F1 - F6 not sending anything at all and F7 - F12 sending the wrong codes on the Maxxter KB-BT-001 Bluetooth keyboard and on similar clones.
Cc: Joao Moreno mail@joaomoreno.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-apple.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index d732d1d10cafb..6909c045fece1 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -54,6 +54,7 @@ MODULE_PARM_DESC(swap_opt_cmd, "Swap the Option ("Alt") and Command ("Flag") struct apple_sc { unsigned long quirks; unsigned int fn_on; + unsigned int fn_found; DECLARE_BITMAP(pressed_numlock, KEY_CNT); };
@@ -339,12 +340,15 @@ static int apple_input_mapping(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { + struct apple_sc *asc = hid_get_drvdata(hdev); + if (usage->hid == (HID_UP_CUSTOM | 0x0003) || usage->hid == (HID_UP_MSVENDOR | 0x0003) || usage->hid == (HID_UP_HPVENDOR2 | 0x0003)) { /* The fn key on Apple USB keyboards */ set_bit(EV_REP, hi->input->evbit); hid_map_usage_clear(hi, usage, bit, max, EV_KEY, KEY_FN); + asc->fn_found = true; apple_setup_input(hi->input); return 1; } @@ -371,6 +375,19 @@ static int apple_input_mapped(struct hid_device *hdev, struct hid_input *hi, return 0; }
+static int apple_input_configured(struct hid_device *hdev, + struct hid_input *hidinput) +{ + struct apple_sc *asc = hid_get_drvdata(hdev); + + if ((asc->quirks & APPLE_HAS_FN) && !asc->fn_found) { + hid_info(hdev, "Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling\n"); + asc->quirks = 0; + } + + return 0; +} + static int apple_probe(struct hid_device *hdev, const struct hid_device_id *id) { @@ -585,6 +602,7 @@ static struct hid_driver apple_driver = { .event = apple_event, .input_mapping = apple_input_mapping, .input_mapped = apple_input_mapped, + .input_configured = apple_input_configured, }; module_hid_driver(apple_driver);
From: Dinghao Liu dinghao.liu@zju.edu.cn
[ Upstream commit 5b78fac4b1ba731cf4177fdbc1e3a4661521bcd0 ]
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu dinghao.liu@zju.edu.cn Reviewed-by: Jon Hunter jonathanh@nvidia.com Link: https://lore.kernel.org/r/20200624064626.19855-1-dinghao.liu@zju.edu.cn Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/tegra210-adma.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c index 914901a680c8a..9068591bd684b 100644 --- a/drivers/dma/tegra210-adma.c +++ b/drivers/dma/tegra210-adma.c @@ -658,6 +658,7 @@ static int tegra_adma_alloc_chan_resources(struct dma_chan *dc)
ret = pm_runtime_get_sync(tdc2dev(tdc)); if (ret < 0) { + pm_runtime_put_noidle(tdc2dev(tdc)); free_irq(tdc->irq, tdc); return ret; } @@ -869,8 +870,10 @@ static int tegra_adma_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev);
ret = pm_runtime_get_sync(&pdev->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_noidle(&pdev->dev); goto rpm_disable; + }
ret = tegra_adma_init(tdma); if (ret)
From: Merlijn Wajer merlijn@wizzup.org
[ Upstream commit c463bb2a8f8d7d97aa414bf7714fc77e9d3b10df ]
This event code represents the state of a removable cover of a device. Value 0 means that the cover is open or removed, value 1 means that the cover is closed.
Reviewed-by: Sebastian Reichel sebastian.reichel@collabora.com Acked-by: Tony Lindgren tony@atomide.com Signed-off-by: Merlijn Wajer merlijn@wizzup.org Link: https://lore.kernel.org/r/20200612125402.18393-2-merlijn@wizzup.org Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/mod_devicetable.h | 2 +- include/uapi/linux/input-event-codes.h | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 953d7ca01eb60..4c56404e53a76 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -318,7 +318,7 @@ struct pcmcia_device_id { #define INPUT_DEVICE_ID_LED_MAX 0x0f #define INPUT_DEVICE_ID_SND_MAX 0x07 #define INPUT_DEVICE_ID_FF_MAX 0x7f -#define INPUT_DEVICE_ID_SW_MAX 0x0f +#define INPUT_DEVICE_ID_SW_MAX 0x10 #define INPUT_DEVICE_ID_PROP_MAX 0x1f
#define INPUT_DEVICE_ID_MATCH_BUS 1 diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index 85387c76c24f3..472cd5bc55676 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h @@ -808,7 +808,8 @@ #define SW_LINEIN_INSERT 0x0d /* set = inserted */ #define SW_MUTE_DEVICE 0x0e /* set = device disabled */ #define SW_PEN_INSERTED 0x0f /* set = pen inserted */ -#define SW_MAX 0x0f +#define SW_MACHINE_COVER 0x10 /* set = cover closed */ +#define SW_MAX 0x10 #define SW_CNT (SW_MAX+1)
/*
From: Merlijn Wajer merlijn@wizzup.org
[ Upstream commit ed3e98e919aaaa47e9d9f8a40c3f6f4a22577842 ]
Instead, expose the key via the input framework, as SW_MACHINE_COVER
The chip-detect GPIO is actually detecting if the cover is closed. Technically it's possible to use the SD card with open cover. The only downside is risk of battery falling out and user being able to physically remove the card.
The behaviour of SD card not being available when the device is open is unexpected and creates more problems than it solves. There is a high chance, that more people accidentally break their rootfs by opening the case without physically removing the card.
Reviewed-by: Sebastian Reichel sebastian.reichel@collabora.com Acked-by: Tony Lindgren tony@atomide.com Signed-off-by: Merlijn Wajer merlijn@wizzup.org Link: https://lore.kernel.org/r/20200612125402.18393-3-merlijn@wizzup.org Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/omap3-n900.dts | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 7f2ddb78da5fa..4227da71cc626 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -105,6 +105,14 @@ proximity_sensor { linux,code = <SW_FRONT_PROXIMITY>; linux,can-disable; }; + + machine_cover { + label = "Machine Cover"; + gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */ + linux,input-type = <EV_SW>; + linux,code = <SW_MACHINE_COVER>; + linux,can-disable; + }; };
isp1707: isp1707 { @@ -814,10 +822,6 @@ &mmc1 { pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; bus-width = <4>; - /* For debugging, it is often good idea to remove this GPIO. - It means you can remove back cover (to reboot by removing - battery) and still use the MMC card. */ - cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */ };
/* most boards use vaux3, only some old versions use vmmc2 instead */
From: "leilk.liu" leilk.liu@mediatek.com
[ Upstream commit 44b37eb79e16a56cb30ba55b2da452396b941e7a ]
this patch use correct SPI_CFG2_REG offset.
Signed-off-by: leilk.liu leilk.liu@mediatek.com Link: https://lore.kernel.org/r/20200701090020.7935-1-leilk.liu@mediatek.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-mt65xx.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 6888a4dcff6de..8acf24f7c5d40 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -36,7 +36,6 @@ #define SPI_CFG0_SCK_LOW_OFFSET 8 #define SPI_CFG0_CS_HOLD_OFFSET 16 #define SPI_CFG0_CS_SETUP_OFFSET 24 -#define SPI_ADJUST_CFG0_SCK_LOW_OFFSET 16 #define SPI_ADJUST_CFG0_CS_HOLD_OFFSET 0 #define SPI_ADJUST_CFG0_CS_SETUP_OFFSET 16
@@ -48,6 +47,8 @@ #define SPI_CFG1_CS_IDLE_MASK 0xff #define SPI_CFG1_PACKET_LOOP_MASK 0xff00 #define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000 +#define SPI_CFG2_SCK_HIGH_OFFSET 0 +#define SPI_CFG2_SCK_LOW_OFFSET 16
#define SPI_CMD_ACT BIT(0) #define SPI_CMD_RESUME BIT(1) @@ -279,7 +280,7 @@ static void mtk_spi_set_cs(struct spi_device *spi, bool enable) static void mtk_spi_prepare_transfer(struct spi_master *master, struct spi_transfer *xfer) { - u32 spi_clk_hz, div, sck_time, cs_time, reg_val = 0; + u32 spi_clk_hz, div, sck_time, cs_time, reg_val; struct mtk_spi *mdata = spi_master_get_devdata(master);
spi_clk_hz = clk_get_rate(mdata->spi_clk); @@ -292,18 +293,18 @@ static void mtk_spi_prepare_transfer(struct spi_master *master, cs_time = sck_time * 2;
if (mdata->dev_comp->enhance_timing) { + reg_val = (((sck_time - 1) & 0xffff) + << SPI_CFG2_SCK_HIGH_OFFSET); reg_val |= (((sck_time - 1) & 0xffff) - << SPI_CFG0_SCK_HIGH_OFFSET); - reg_val |= (((sck_time - 1) & 0xffff) - << SPI_ADJUST_CFG0_SCK_LOW_OFFSET); + << SPI_CFG2_SCK_LOW_OFFSET); writel(reg_val, mdata->base + SPI_CFG2_REG); - reg_val |= (((cs_time - 1) & 0xffff) + reg_val = (((cs_time - 1) & 0xffff) << SPI_ADJUST_CFG0_CS_HOLD_OFFSET); reg_val |= (((cs_time - 1) & 0xffff) << SPI_ADJUST_CFG0_CS_SETUP_OFFSET); writel(reg_val, mdata->base + SPI_CFG0_REG); } else { - reg_val |= (((sck_time - 1) & 0xff) + reg_val = (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_HIGH_OFFSET); reg_val |= (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_LOW_OFFSET); reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
From: Marc Kleine-Budde mkl@pengutronix.de
[ Upstream commit e84861fec32dee8a2e62bbaa52cded6b05a2a456 ]
This function is used by dev_get_regmap() to retrieve a regmap for the specified device. If the device has more than one regmap, the name parameter can be used to specify one.
The code here uses a pointer comparison to check for equal strings. This however will probably always fail, as the regmap->name is allocated via kstrdup_const() from the regmap's config->name.
Fix this by using strcmp() instead.
Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Link: https://lore.kernel.org/r/20200703103315.267996-1-mkl@pengutronix.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/base/regmap/regmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 320d23de02c29..927ebde1607be 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -1363,7 +1363,7 @@ static int dev_get_regmap_match(struct device *dev, void *res, void *data)
/* If the user didn't specify a name match any */ if (data) - return (*r)->name == data; + return !strcmp((*r)->name, data); else return 1; }
From: Evgeny Novikov novikov@ispras.ru
[ Upstream commit bc4071aafcf4d0535ee423b69167696d6c03207d ]
aspeed_create_fan() reads a pwm_port value using of_property_read_u32(). If pwm_port will be more than ARRAY_SIZE(pwm_port_params), there will be a buffer overflow in aspeed_create_pwm_port()->aspeed_set_pwm_port_enable(). The patch fixes the potential buffer overflow.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov novikov@ispras.ru Link: https://lore.kernel.org/r/20200703111518.9644-1-novikov@ispras.ru Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/aspeed-pwm-tacho.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c index 40c489be62eaa..40f3139f1e028 100644 --- a/drivers/hwmon/aspeed-pwm-tacho.c +++ b/drivers/hwmon/aspeed-pwm-tacho.c @@ -851,6 +851,8 @@ static int aspeed_create_fan(struct device *dev, ret = of_property_read_u32(child, "reg", &pwm_port); if (ret) return ret; + if (pwm_port >= ARRAY_SIZE(pwm_port_params)) + return -EINVAL; aspeed_create_pwm_port(priv, (u8)pwm_port);
ret = of_property_count_u8_elems(child, "cooling-levels");
From: Angelo Dureghello angelo.dureghello@timesys.com
[ Upstream commit 8678c71c17721e0f771f135967ef0cce8f69ce9a ]
Due to recent fixes in m68k arch-specific I/O accessor macros, this driver is not working anymore for ColdFire. Fix wrong tcd endianness removing additional swaps, since edma_writex() functions should already take care of any eventual swap if needed.
Note, i could only test the change in ColdFire mcf54415 and Vybrid vf50 / Colibri where i don't see any issue. So, every feedback and test for all other SoCs involved is really appreciated.
Signed-off-by: Angelo Dureghello angelo.dureghello@timesys.com Reported-by: kbuild test robot lkp@intel.com Link: https://lore.kernel.org/r/20200701225205.1674463-1-angelo.dureghello@timesys... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/fsl-edma-common.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c index b1a7ca91701a8..d6010486ee502 100644 --- a/drivers/dma/fsl-edma-common.c +++ b/drivers/dma/fsl-edma-common.c @@ -347,26 +347,28 @@ static void fsl_edma_set_tcd_regs(struct fsl_edma_chan *fsl_chan, /* * TCD parameters are stored in struct fsl_edma_hw_tcd in little * endian format. However, we need to load the TCD registers in - * big- or little-endian obeying the eDMA engine model endian. + * big- or little-endian obeying the eDMA engine model endian, + * and this is performed from specific edma_write functions */ edma_writew(edma, 0, ®s->tcd[ch].csr); - edma_writel(edma, le32_to_cpu(tcd->saddr), ®s->tcd[ch].saddr); - edma_writel(edma, le32_to_cpu(tcd->daddr), ®s->tcd[ch].daddr);
- edma_writew(edma, le16_to_cpu(tcd->attr), ®s->tcd[ch].attr); - edma_writew(edma, le16_to_cpu(tcd->soff), ®s->tcd[ch].soff); + edma_writel(edma, (s32)tcd->saddr, ®s->tcd[ch].saddr); + edma_writel(edma, (s32)tcd->daddr, ®s->tcd[ch].daddr);
- edma_writel(edma, le32_to_cpu(tcd->nbytes), ®s->tcd[ch].nbytes); - edma_writel(edma, le32_to_cpu(tcd->slast), ®s->tcd[ch].slast); + edma_writew(edma, (s16)tcd->attr, ®s->tcd[ch].attr); + edma_writew(edma, tcd->soff, ®s->tcd[ch].soff);
- edma_writew(edma, le16_to_cpu(tcd->citer), ®s->tcd[ch].citer); - edma_writew(edma, le16_to_cpu(tcd->biter), ®s->tcd[ch].biter); - edma_writew(edma, le16_to_cpu(tcd->doff), ®s->tcd[ch].doff); + edma_writel(edma, (s32)tcd->nbytes, ®s->tcd[ch].nbytes); + edma_writel(edma, (s32)tcd->slast, ®s->tcd[ch].slast);
- edma_writel(edma, le32_to_cpu(tcd->dlast_sga), + edma_writew(edma, (s16)tcd->citer, ®s->tcd[ch].citer); + edma_writew(edma, (s16)tcd->biter, ®s->tcd[ch].biter); + edma_writew(edma, (s16)tcd->doff, ®s->tcd[ch].doff); + + edma_writel(edma, (s32)tcd->dlast_sga, ®s->tcd[ch].dlast_sga);
- edma_writew(edma, le16_to_cpu(tcd->csr), ®s->tcd[ch].csr); + edma_writew(edma, (s16)tcd->csr, ®s->tcd[ch].csr); }
static inline
From: Leonid Ravich Leonid.Ravich@emc.com
[ Upstream commit 87730ccbddcb48478b1b88e88b14e73424130764 ]
DMA transaction time to completion is a function of PCI bandwidth, transaction size and a queue depth. So hard coded value for timeouts might be wrong for some scenarios.
Signed-off-by: Leonid Ravich Leonid.Ravich@emc.com Reviewed-by: Dave Jiang dave.jiang@intel.com Link: https://lore.kernel.org/r/20200701184816.29138-1-leonid.ravich@dell.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/ioat/dma.c | 12 ++++++++++++ drivers/dma/ioat/dma.h | 2 -- 2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index 18c011e57592e..8e2a4d1f0be53 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -26,6 +26,18 @@
#include "../dmaengine.h"
+int completion_timeout = 200; +module_param(completion_timeout, int, 0644); +MODULE_PARM_DESC(completion_timeout, + "set ioat completion timeout [msec] (default 200 [msec])"); +int idle_timeout = 2000; +module_param(idle_timeout, int, 0644); +MODULE_PARM_DESC(idle_timeout, + "set ioat idel timeout [msec] (default 2000 [msec])"); + +#define IDLE_TIMEOUT msecs_to_jiffies(idle_timeout) +#define COMPLETION_TIMEOUT msecs_to_jiffies(completion_timeout) + static char *chanerr_str[] = { "DMA Transfer Source Address Error", "DMA Transfer Destination Address Error", diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index b8e8e0b9693c7..4ac9134962f3b 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -99,8 +99,6 @@ struct ioatdma_chan { #define IOAT_RUN 5 #define IOAT_CHAN_ACTIVE 6 struct timer_list timer; - #define COMPLETION_TIMEOUT msecs_to_jiffies(100) - #define IDLE_TIMEOUT msecs_to_jiffies(2000) #define RESET_DELAY msecs_to_jiffies(100) struct ioatdma_device *ioat_dma; dma_addr_t completion_dma;
From: Ilya Katsnelson me@0upti.me
[ Upstream commit dcb00fc799dc03fd320e123e4c81b3278c763ea5 ]
Tested on my own laptop, touchpad feels slightly more responsive with this on, though it might just be placebo.
Signed-off-by: Ilya Katsnelson me@0upti.me Reviewed-by: Lyude Paul lyude@redhat.com Link: https://lore.kernel.org/r/20200703143457.132373-1-me@0upti.me Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/mouse/synaptics.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 758dae8d65006..4b81b2d0fe067 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -179,6 +179,7 @@ static const char * const smbus_pnp_ids[] = { "LEN0093", /* T480 */ "LEN0096", /* X280 */ "LEN0097", /* X280 -> ALPS trackpoint */ + "LEN0099", /* X1 Extreme 1st */ "LEN009b", /* T580 */ "LEN200f", /* T450s */ "LEN2044", /* L470 */
From: Derek Basehore dbasehore@chromium.org
[ Upstream commit 966334dfc472bdfa67bed864842943b19755d192 ]
This moves the wakeup increment for elan devices to the touch report. This prevents the drivers from incorrectly reporting a wakeup when the resume callback resets then device, which causes an interrupt to occur.
Signed-off-by: Derek Basehore dbasehore@chromium.org Link: https://lore.kernel.org/r/20200706235046.1984283-1-dbasehore@chromium.org Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/mouse/elan_i2c_core.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 8719da5403834..196e8505dd8d7 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -951,6 +951,8 @@ static void elan_report_absolute(struct elan_tp_data *data, u8 *packet) u8 hover_info = packet[ETP_HOVER_INFO_OFFSET]; bool contact_valid, hover_event;
+ pm_wakeup_event(&data->client->dev, 0); + hover_event = hover_info & 0x40; for (i = 0; i < ETP_MAX_FINGERS; i++) { contact_valid = tp_info & (1U << (3 + i)); @@ -974,6 +976,8 @@ static void elan_report_trackpoint(struct elan_tp_data *data, u8 *report) u8 *packet = &report[ETP_REPORT_ID_OFFSET + 1]; int x, y;
+ pm_wakeup_event(&data->client->dev, 0); + if (!data->tp_input) { dev_warn_once(&data->client->dev, "received a trackpoint report while no trackpoint device has been created. Please report upstream.\n"); @@ -998,7 +1002,6 @@ static void elan_report_trackpoint(struct elan_tp_data *data, u8 *report) static irqreturn_t elan_isr(int irq, void *dev_id) { struct elan_tp_data *data = dev_id; - struct device *dev = &data->client->dev; int error; u8 report[ETP_MAX_REPORT_LEN];
@@ -1016,8 +1019,6 @@ static irqreturn_t elan_isr(int irq, void *dev_id) if (error) goto out;
- pm_wakeup_event(dev, 0); - switch (report[ETP_REPORT_ID_OFFSET]) { case ETP_REPORT_ID: elan_report_absolute(data, report); @@ -1026,7 +1027,7 @@ static irqreturn_t elan_isr(int irq, void *dev_id) elan_report_trackpoint(data, report); break; default: - dev_err(dev, "invalid report id data (%x)\n", + dev_err(&data->client->dev, "invalid report id data (%x)\n", report[ETP_REPORT_ID_OFFSET]); }
From: Heikki Krogerus heikki.krogerus@linux.intel.com
[ Upstream commit c3f595a8119207cc0f82b3dc6ec5bbf6f3e6b135 ]
This patch adds the necessary PCI ID for TGP-H devices.
Signed-off-by: Heikki Krogerus heikki.krogerus@linux.intel.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 96c05b121fac8..47b7e83d90626 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -38,6 +38,7 @@ #define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee #define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e #define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee +#define PCI_DEVICE_ID_INTEL_TGPH 0x43ee
#define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -358,6 +359,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPLP), (kernel_ulong_t) &dwc3_pci_intel_properties, },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPH), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */
From: Heikki Krogerus heikki.krogerus@linux.intel.com
[ Upstream commit e25d1e8532c3d84f075deca1580a7d61e0f43ce6 ]
This patch adds the necessary PCI ID for Intel Jasper Lake devices.
Signed-off-by: Heikki Krogerus heikki.krogerus@linux.intel.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 47b7e83d90626..139474c3e77b1 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -39,6 +39,7 @@ #define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e #define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee #define PCI_DEVICE_ID_INTEL_TGPH 0x43ee +#define PCI_DEVICE_ID_INTEL_JSP 0x4dee
#define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -362,6 +363,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPH), (kernel_ulong_t) &dwc3_pci_intel_properties, },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_JSP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */
From: Evgeny Novikov novikov@ispras.ru
[ Upstream commit c8f8529e2c4141afa2ebb487ad48e8a6ec3e8c99 ]
gr_ep_init() does not assign the allocated request anywhere if allocation of memory for the buffer fails. This is a memory leak fixed by the given patch.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov novikov@ispras.ru Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/gr_udc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c index 116d386472efe..da73a06c20a39 100644 --- a/drivers/usb/gadget/udc/gr_udc.c +++ b/drivers/usb/gadget/udc/gr_udc.c @@ -1980,9 +1980,12 @@ static int gr_ep_init(struct gr_udc *dev, int num, int is_in, u32 maxplimit)
if (num == 0) { _req = gr_alloc_request(&ep->ep, GFP_ATOMIC); + if (!_req) + return -ENOMEM; + buf = devm_kzalloc(dev->dev, PAGE_SIZE, GFP_DMA | GFP_ATOMIC); - if (!_req || !buf) { - /* possible _req freed by gr_probe via gr_remove */ + if (!buf) { + gr_free_request(&ep->ep, _req); return -ENOMEM; }
From: Peter Chen peter.chen@nxp.com
[ Upstream commit 9f81d45c79271def8a9b90447b04b9c6323291f9 ]
It is found by sparse.
Reported-by: kbuild test robot lkp@intel.com Signed-off-by: Peter Chen peter.chen@nxp.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/cdns3/ep0.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c index da4c5eb03d7ee..666cebd9c5f29 100644 --- a/drivers/usb/cdns3/ep0.c +++ b/drivers/usb/cdns3/ep0.c @@ -37,18 +37,18 @@ static void cdns3_ep0_run_transfer(struct cdns3_device *priv_dev, struct cdns3_usb_regs __iomem *regs = priv_dev->regs; struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
- priv_ep->trb_pool[0].buffer = TRB_BUFFER(dma_addr); - priv_ep->trb_pool[0].length = TRB_LEN(length); + priv_ep->trb_pool[0].buffer = cpu_to_le32(TRB_BUFFER(dma_addr)); + priv_ep->trb_pool[0].length = cpu_to_le32(TRB_LEN(length));
if (zlp) { - priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_TYPE(TRB_NORMAL); - priv_ep->trb_pool[1].buffer = TRB_BUFFER(dma_addr); - priv_ep->trb_pool[1].length = TRB_LEN(0); - priv_ep->trb_pool[1].control = TRB_CYCLE | TRB_IOC | - TRB_TYPE(TRB_NORMAL); + priv_ep->trb_pool[0].control = cpu_to_le32(TRB_CYCLE | TRB_TYPE(TRB_NORMAL)); + priv_ep->trb_pool[1].buffer = cpu_to_le32(TRB_BUFFER(dma_addr)); + priv_ep->trb_pool[1].length = cpu_to_le32(TRB_LEN(0)); + priv_ep->trb_pool[1].control = cpu_to_le32(TRB_CYCLE | TRB_IOC | + TRB_TYPE(TRB_NORMAL)); } else { - priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_IOC | - TRB_TYPE(TRB_NORMAL); + priv_ep->trb_pool[0].control = cpu_to_le32(TRB_CYCLE | TRB_IOC | + TRB_TYPE(TRB_NORMAL)); priv_ep->trb_pool[1].control = 0; }
@@ -264,11 +264,11 @@ static int cdns3_req_ep0_get_status(struct cdns3_device *priv_dev, case USB_RECIP_INTERFACE: return cdns3_ep0_delegate_req(priv_dev, ctrl); case USB_RECIP_ENDPOINT: - index = cdns3_ep_addr_to_index(ctrl->wIndex); + index = cdns3_ep_addr_to_index(le16_to_cpu(ctrl->wIndex)); priv_ep = priv_dev->eps[index];
/* check if endpoint is stalled or stall is pending */ - cdns3_select_ep(priv_dev, ctrl->wIndex); + cdns3_select_ep(priv_dev, le16_to_cpu(ctrl->wIndex)); if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts)) || (priv_ep->flags & EP_STALL_PENDING)) usb_status = BIT(USB_ENDPOINT_HALT); @@ -388,10 +388,10 @@ static int cdns3_ep0_feature_handle_endpoint(struct cdns3_device *priv_dev, if (!(ctrl->wIndex & ~USB_DIR_IN)) return 0;
- index = cdns3_ep_addr_to_index(ctrl->wIndex); + index = cdns3_ep_addr_to_index(le16_to_cpu(ctrl->wIndex)); priv_ep = priv_dev->eps[index];
- cdns3_select_ep(priv_dev, ctrl->wIndex); + cdns3_select_ep(priv_dev, le16_to_cpu(ctrl->wIndex));
if (set) __cdns3_gadget_ep_set_halt(priv_ep); @@ -452,7 +452,7 @@ static int cdns3_req_ep0_set_sel(struct cdns3_device *priv_dev, if (priv_dev->gadget.state < USB_STATE_ADDRESS) return -EINVAL;
- if (ctrl_req->wLength != 6) { + if (le16_to_cpu(ctrl_req->wLength) != 6) { dev_err(priv_dev->dev, "Set SEL should be 6 bytes, got %d\n", ctrl_req->wLength); return -EINVAL; @@ -476,7 +476,7 @@ static int cdns3_req_ep0_set_isoch_delay(struct cdns3_device *priv_dev, if (ctrl_req->wIndex || ctrl_req->wLength) return -EINVAL;
- priv_dev->isoch_delay = ctrl_req->wValue; + priv_dev->isoch_delay = le16_to_cpu(ctrl_req->wValue);
return 0; }
From: Peter Chen peter.chen@nxp.com
[ Upstream commit 65b7cf48c211ece5e2560a334eb9608e48775a8f ]
It is found by sparse.
Reported-by: kbuild test robot lkp@intel.com Signed-off-by: Peter Chen peter.chen@nxp.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/cdns3/trace.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/cdns3/trace.h b/drivers/usb/cdns3/trace.h index 7cc8bebaa07da..f8482456116e8 100644 --- a/drivers/usb/cdns3/trace.h +++ b/drivers/usb/cdns3/trace.h @@ -333,9 +333,9 @@ DECLARE_EVENT_CLASS(cdns3_log_trb, TP_fast_assign( __assign_str(name, priv_ep->name); __entry->trb = trb; - __entry->buffer = trb->buffer; - __entry->length = trb->length; - __entry->control = trb->control; + __entry->buffer = le32_to_cpu(trb->buffer); + __entry->length = le32_to_cpu(trb->length); + __entry->control = le32_to_cpu(trb->control); __entry->type = usb_endpoint_type(priv_ep->endpoint.desc); ), TP_printk("%s: trb %p, dma buf: 0x%08x, size: %ld, burst: %d ctrl: 0x%08x (%s%s%s%s%s%s%s)",
From: Chu Lin linchuyuan@google.com
[ Upstream commit 6d1d41c075a1a54ba03370e268171fec20e06563 ]
Issue: When PEC is enabled, binding adm1272 to the adm1275 would fail due to PEC error. See below: adm1275: probe of xxxx failed with error -74
Diagnosis: Per the datasheet of adm1272, adm1278, adm1293 and amd1294, PMON_CONFIG (0xd4) is 16bits wide. On the other hand, PMON_CONFIG (0xd4) for adm1275 is 8bits wide. The driver should not assume everything is 8bits wide and read only 8bits from it.
Solution: If it is adm1272, adm1278, adm1293 and adm1294, use i2c_read_word. Else, use i2c_read_byte
Testing: Binding adm1272 to the driver. The change is only tested on adm1272.
Signed-off-by: Chu Lin linchuyuan@google.com Link: https://lore.kernel.org/r/20200709040612.3977094-1-linchuyuan@google.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/pmbus/adm1275.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c index 5caa37fbfc187..66b12e5ccbc65 100644 --- a/drivers/hwmon/pmbus/adm1275.c +++ b/drivers/hwmon/pmbus/adm1275.c @@ -454,6 +454,7 @@ MODULE_DEVICE_TABLE(i2c, adm1275_id); static int adm1275_probe(struct i2c_client *client, const struct i2c_device_id *id) { + s32 (*config_read_fn)(const struct i2c_client *client, u8 reg); u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; int config, device_config; int ret; @@ -499,11 +500,16 @@ static int adm1275_probe(struct i2c_client *client, "Device mismatch: Configured %s, detected %s\n", id->name, mid->name);
- config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG); + if (mid->driver_data == adm1272 || mid->driver_data == adm1278 || + mid->driver_data == adm1293 || mid->driver_data == adm1294) + config_read_fn = i2c_smbus_read_word_data; + else + config_read_fn = i2c_smbus_read_byte_data; + config = config_read_fn(client, ADM1275_PMON_CONFIG); if (config < 0) return config;
- device_config = i2c_smbus_read_byte_data(client, ADM1275_DEVICE_CONFIG); + device_config = config_read_fn(client, ADM1275_DEVICE_CONFIG); if (device_config < 0) return device_config;
From: Jack Xiao Jack.Xiao@amd.com
[ Upstream commit 7d65a577bb58d4f27a3398a4c0cb0b00ab7d0511 ]
During preemption test for gfx10, it uses kiq to trigger gfx preemption, which would result in race condition with flushing TLB for kiq.
Signed-off-by: Jack Xiao Jack.Xiao@amd.com Reviewed-by: Hawking Zhang Hawking.Zhang@amd.com Acked-by: Christian König christian.koenig@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c index 6f118292e40fb..64d96eb0a2337 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c @@ -4683,12 +4683,17 @@ static int gfx_v10_0_ring_preempt_ib(struct amdgpu_ring *ring) struct amdgpu_device *adev = ring->adev; struct amdgpu_kiq *kiq = &adev->gfx.kiq; struct amdgpu_ring *kiq_ring = &kiq->ring; + unsigned long flags;
if (!kiq->pmf || !kiq->pmf->kiq_unmap_queues) return -EINVAL;
- if (amdgpu_ring_alloc(kiq_ring, kiq->pmf->unmap_queues_size)) + spin_lock_irqsave(&kiq->ring_lock, flags); + + if (amdgpu_ring_alloc(kiq_ring, kiq->pmf->unmap_queues_size)) { + spin_unlock_irqrestore(&kiq->ring_lock, flags); return -ENOMEM; + }
/* assert preemption condition */ amdgpu_ring_set_preempt_cond_exec(ring, false); @@ -4699,6 +4704,8 @@ static int gfx_v10_0_ring_preempt_ib(struct amdgpu_ring *ring) ++ring->trail_seq); amdgpu_ring_commit(kiq_ring);
+ spin_unlock_irqrestore(&kiq->ring_lock, flags); + /* poll the trailing fence */ for (i = 0; i < adev->usec_timeout; i++) { if (ring->trail_seq ==
From: Jack Xiao Jack.Xiao@amd.com
[ Upstream commit d845a2051b6b673fab4229b920ea04c7c4352b51 ]
Remove signaled jobs from job list and ensure the job was indeed preempted.
Signed-off-by: Jack Xiao Jack.Xiao@amd.com Reviewed-by: Hawking Zhang Hawking.Zhang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c index 1e25ca34d876c..700e26b69abca 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c @@ -990,27 +990,37 @@ static void amdgpu_ib_preempt_job_recovery(struct drm_gpu_scheduler *sched) static void amdgpu_ib_preempt_mark_partial_job(struct amdgpu_ring *ring) { struct amdgpu_job *job; - struct drm_sched_job *s_job; + struct drm_sched_job *s_job, *tmp; uint32_t preempt_seq; struct dma_fence *fence, **ptr; struct amdgpu_fence_driver *drv = &ring->fence_drv; struct drm_gpu_scheduler *sched = &ring->sched; + bool preempted = true;
if (ring->funcs->type != AMDGPU_RING_TYPE_GFX) return;
preempt_seq = le32_to_cpu(*(drv->cpu_addr + 2)); - if (preempt_seq <= atomic_read(&drv->last_seq)) - return; + if (preempt_seq <= atomic_read(&drv->last_seq)) { + preempted = false; + goto no_preempt; + }
preempt_seq &= drv->num_fences_mask; ptr = &drv->fences[preempt_seq]; fence = rcu_dereference_protected(*ptr, 1);
+no_preempt: spin_lock(&sched->job_list_lock); - list_for_each_entry(s_job, &sched->ring_mirror_list, node) { + list_for_each_entry_safe(s_job, tmp, &sched->ring_mirror_list, node) { + if (dma_fence_is_signaled(&s_job->s_fence->finished)) { + /* remove job from ring_mirror_list */ + list_del_init(&s_job->node); + sched->ops->free_job(s_job); + continue; + } job = to_amdgpu_job(s_job); - if (job->fence == fence) + if (preempted && job->fence == fence) /* mark the job as preempted */ job->preemption_status |= AMDGPU_IB_PREEMPTED; }
From: Guenter Roeck linux@roeck-us.net
[ Upstream commit 8a03746c8baf82e1616f05a1a716d34378dcf780 ]
Stefan Dietrich reports invalid temperature source messages on Asus Formula XII Z490.
nct6775 nct6775.656: Invalid temperature source 28 at index 0, source register 0x100, temp register 0x73
Debugging suggests that temperature source 28 reports the CPU temperature. Let's assume that temperature sources 28 and 29 reflect "PECI Agent {0,1} Calibration", similar to other chips of the series.
Reported-by: Stefan Dietrich roots@gmx.de Cc: Stefan Dietrich roots@gmx.de Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/nct6775.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index 7efa6bfef0609..ba9b96973e808 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -786,13 +786,13 @@ static const char *const nct6798_temp_label[] = { "Agent1 Dimm1", "BYTE_TEMP0", "BYTE_TEMP1", - "", - "", + "PECI Agent 0 Calibration", /* undocumented */ + "PECI Agent 1 Calibration", /* undocumented */ "", "Virtual_TEMP" };
-#define NCT6798_TEMP_MASK 0x8fff0ffe +#define NCT6798_TEMP_MASK 0xbfff0ffe #define NCT6798_VIRT_TEMP_MASK 0x80000c00
/* NCT6102D/NCT6106D specific data */
From: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com
[ Upstream commit e1eea3f839f41368d7cb4eb2d872d5b288677e94 ]
Added new PCI device ids for supporting mailbox and MMIO interface for Sapphire Rapids.
Signed-off-by: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/intel_speed_select_if/isst_if_common.h | 3 +++ drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c | 1 + drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c | 1 + 3 files changed, 5 insertions(+)
diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_common.h b/drivers/platform/x86/intel_speed_select_if/isst_if_common.h index 1409a5bb55820..4f6f7f0761fc1 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_common.h +++ b/drivers/platform/x86/intel_speed_select_if/isst_if_common.h @@ -13,6 +13,9 @@ #define INTEL_RAPL_PRIO_DEVID_0 0x3451 #define INTEL_CFG_MBOX_DEVID_0 0x3459
+#define INTEL_RAPL_PRIO_DEVID_1 0x3251 +#define INTEL_CFG_MBOX_DEVID_1 0x3259 + /* * Validate maximum commands in a single request. * This is enough to handle command to every core in one ioctl, or all diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c b/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c index de4169d0796bd..9a055fd54053f 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c +++ b/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c @@ -148,6 +148,7 @@ static long isst_if_mbox_proc_cmd(u8 *cmd_ptr, int *write_only, int resume)
static const struct pci_device_id isst_if_mbox_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_CFG_MBOX_DEVID_0)}, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_CFG_MBOX_DEVID_1)}, { 0 }, }; MODULE_DEVICE_TABLE(pci, isst_if_mbox_ids); diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c index ad8c7c0df4d9a..e3778204b7a60 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c +++ b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c @@ -72,6 +72,7 @@ static long isst_if_mmio_rd_wr(u8 *cmd_ptr, int *write_only, int resume)
static const struct pci_device_id isst_if_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_RAPL_PRIO_DEVID_0)}, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_RAPL_PRIO_DEVID_1)}, { 0 }, }; MODULE_DEVICE_TABLE(pci, isst_if_ids);
From: Vasiliy Kupriakov rublag-ns@yandex.ru
[ Upstream commit 9a33e375d98ece5ea40c576eabd3257acb90c509 ]
The battery on my laptop ASUS TUF Gaming FX706II is named BAT1. This patch allows battery extension to load.
Signed-off-by: Vasiliy Kupriakov rublag-ns@yandex.ru Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/asus-wmi.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index b1f4a31ba1ee5..ed83fb135bab3 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -424,6 +424,7 @@ static int asus_wmi_battery_add(struct power_supply *battery) * battery is named BATT. */ if (strcmp(battery->desc->name, "BAT0") != 0 && + strcmp(battery->desc->name, "BAT1") != 0 && strcmp(battery->desc->name, "BATT") != 0) return -ENODEV;
From: Cristian Marussi cristian.marussi@arm.com
[ Upstream commit 3ce17cd2b94907f6d91b81b32848044b84c97606 ]
SMATCH detected a potential buffer overflow in the manipulation of hwmon_attributes array inside the scmi_hwmon_probe function:
drivers/hwmon/scmi-hwmon.c:226 scmi_hwmon_probe() error: buffer overflow 'hwmon_attributes' 6 <= 9
Fix it by statically declaring the size of the array as the maximum possible as defined by hwmon_max define.
Signed-off-by: Cristian Marussi cristian.marussi@arm.com Reviewed-by: Sudeep Holla sudeep.holla@arm.com Link: https://lore.kernel.org/r/20200715121338.GA18761@e119603-lin.cambridge.arm.c... Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/scmi-hwmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c index 8a7732c0bef3e..7cd13a217c615 100644 --- a/drivers/hwmon/scmi-hwmon.c +++ b/drivers/hwmon/scmi-hwmon.c @@ -147,7 +147,7 @@ static enum hwmon_sensor_types scmi_types[] = { [ENERGY] = hwmon_energy, };
-static u32 hwmon_attributes[] = { +static u32 hwmon_attributes[hwmon_max] = { [hwmon_chip] = HWMON_C_REGISTER_TZ, [hwmon_temp] = HWMON_T_INPUT | HWMON_T_LABEL, [hwmon_in] = HWMON_I_INPUT | HWMON_I_LABEL,
From: PeiSen Hou pshou@realtek.com.tw
[ Upstream commit 5734e509d5d515c187f642937ef2de1e58d7715d ]
Add headset_jack for the intel reference board support with 10ec:1230.
Signed-off-by: PeiSen Hou pshou@realtek.com.tw Link: https://lore.kernel.org/r/20200716090134.9811-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 160e00e8007aa..c46651207a0ca 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7523,6 +7523,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x10cf, 0x1629, "Lifebook U7x7", ALC255_FIXUP_LIFEBOOK_U7x7_HEADSET_MIC), SND_PCI_QUIRK(0x10cf, 0x1845, "Lifebook U904", ALC269_FIXUP_LIFEBOOK_EXTMIC), SND_PCI_QUIRK(0x10ec, 0x10f2, "Intel Reference board", ALC700_FIXUP_INTEL_REFERENCE), + SND_PCI_QUIRK(0x10ec, 0x1230, "Intel Reference board", ALC225_FIXUP_HEADSET_JACK), SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-SZ6", ALC269_FIXUP_HEADSET_MODE), SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x144d, 0xc169, "Samsung Notebook 9 Pen (NP930SBE-K01US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
From: Qi Liu liuqi115@huawei.com
[ Upstream commit bdc5c744c7b6457d18a95c26769dad0e7f480a08 ]
When users try to remove PMU modules during perf sampling, kernel panic will happen because the pmu->read() is a NULL pointer here.
INFO on HiSilicon hip08 platform as follow: pc : hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu] lr : hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu] sp : ffff800010103e90 x29: ffff800010103e90 x28: ffff0027db0c0e40 x27: ffffa29a76f129d8 x26: ffffa29a77ceb000 x25: ffffa29a773a5000 x24: ffffa29a77392000 x23: ffffddffe5943f08 x22: ffff002784285960 x21: ffff002784285800 x20: ffff0027d2e76c80 x19: ffff0027842859e0 x18: ffff80003498bcc8 x17: ffffa29a76afe910 x16: ffffa29a7583f530 x15: 16151a1512061a1e x14: 0000000000000000 x13: ffffa29a76f1e238 x12: 0000000000000001 x11: 0000000000000400 x10: 00000000000009f0 x9 : ffff8000107b3e70 x8 : ffff0027db0c1890 x7 : ffffa29a773a7000 x6 : 00000007f5131013 x5 : 00000007f5131013 x4 : 09f257d417c00000 x3 : 00000002187bd7ce x2 : ffffa29a38f0f0d8 x1 : ffffa29a38eae268 x0 : ffff0027d2e76c80 Call trace: hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu] hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu] __perf_event_read+0x1a0/0x1f8 flush_smp_call_function_queue+0xa0/0x160 generic_smp_call_function_single_interrupt+0x18/0x20 handle_IPI+0x31c/0x4dc gic_handle_irq+0x2c8/0x310 el1_irq+0xcc/0x180 arch_cpu_idle+0x4c/0x20c default_idle_call+0x20/0x30 do_idle+0x1b4/0x270 cpu_startup_entry+0x28/0x30 secondary_start_kernel+0x1a4/0x1fc
To solve the above issue, current module should be registered to kernel, so that try_module_get() can be invoked when perf sampling starts. This adds the reference counting of module and could prevent users from removing modules during sampling.
Reported-by: Haifeng Wang wang.wanghaifeng@huawei.com Signed-off-by: Qi Liu liuqi115@huawei.com Reviewed-by: John Garry john.garry@huawei.com Link: https://lore.kernel.org/r/1594891165-8228-1-git-send-email-liuqi115@huawei.c... Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/perf/arm_smmuv3_pmu.c | 1 + drivers/perf/fsl_imx8_ddr_perf.c | 1 + drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c | 1 + drivers/perf/hisilicon/hisi_uncore_hha_pmu.c | 1 + drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c | 1 + 5 files changed, 5 insertions(+)
diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c index 3269232ff5708..f8fc1b612119c 100644 --- a/drivers/perf/arm_smmuv3_pmu.c +++ b/drivers/perf/arm_smmuv3_pmu.c @@ -742,6 +742,7 @@ static int smmu_pmu_probe(struct platform_device *pdev) platform_set_drvdata(pdev, smmu_pmu);
smmu_pmu->pmu = (struct pmu) { + .module = THIS_MODULE, .task_ctx_nr = perf_invalid_context, .pmu_enable = smmu_pmu_enable, .pmu_disable = smmu_pmu_disable, diff --git a/drivers/perf/fsl_imx8_ddr_perf.c b/drivers/perf/fsl_imx8_ddr_perf.c index 6eef47de8fccc..b241db6929c08 100644 --- a/drivers/perf/fsl_imx8_ddr_perf.c +++ b/drivers/perf/fsl_imx8_ddr_perf.c @@ -451,6 +451,7 @@ static int ddr_perf_init(struct ddr_pmu *pmu, void __iomem *base, { *pmu = (struct ddr_pmu) { .pmu = (struct pmu) { + .module = THIS_MODULE, .capabilities = PERF_PMU_CAP_NO_EXCLUDE, .task_ctx_nr = perf_invalid_context, .attr_groups = attr_groups, diff --git a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c index e42d4464c2cf7..64712cf2f99ad 100644 --- a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c @@ -381,6 +381,7 @@ static int hisi_ddrc_pmu_probe(struct platform_device *pdev) ddrc_pmu->sccl_id, ddrc_pmu->index_id); ddrc_pmu->pmu = (struct pmu) { .name = name, + .module = THIS_MODULE, .task_ctx_nr = perf_invalid_context, .event_init = hisi_uncore_pmu_event_init, .pmu_enable = hisi_uncore_pmu_enable, diff --git a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c index 0d6325d6a4ec3..a4004dad6bf1c 100644 --- a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c @@ -392,6 +392,7 @@ static int hisi_hha_pmu_probe(struct platform_device *pdev) hha_pmu->sccl_id, hha_pmu->index_id); hha_pmu->pmu = (struct pmu) { .name = name, + .module = THIS_MODULE, .task_ctx_nr = perf_invalid_context, .event_init = hisi_uncore_pmu_event_init, .pmu_enable = hisi_uncore_pmu_enable, diff --git a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c index c5b0950c2a7a9..2f3f291b0c2ed 100644 --- a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c @@ -382,6 +382,7 @@ static int hisi_l3c_pmu_probe(struct platform_device *pdev) l3c_pmu->sccl_id, l3c_pmu->index_id); l3c_pmu->pmu = (struct pmu) { .name = name, + .module = THIS_MODULE, .task_ctx_nr = perf_invalid_context, .event_init = hisi_uncore_pmu_event_init, .pmu_enable = hisi_uncore_pmu_enable,
From: Will Deacon will@kernel.org
[ Upstream commit 5afc78551bf5d53279036e0bf63314e35631d79f ]
Rather than open-code test_tsk_thread_flag() at each callsite, simply replace the couple of offenders with calls to test_tsk_thread_flag() directly.
Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kernel/debug-monitors.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index 48222a4760c2e..87fa932108ee3 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -393,14 +393,14 @@ void user_rewind_single_step(struct task_struct *task) * If single step is active for this thread, then set SPSR.SS * to 1 to avoid returning to the active-pending state. */ - if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP)) + if (test_tsk_thread_flag(task, TIF_SINGLESTEP)) set_regs_spsr_ss(task_pt_regs(task)); } NOKPROBE_SYMBOL(user_rewind_single_step);
void user_fastforward_single_step(struct task_struct *task) { - if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP)) + if (test_tsk_thread_flag(task, TIF_SINGLESTEP)) clear_regs_spsr_ss(task_pt_regs(task)); }
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit 81e96851ea32deb2c921c870eecabf335f598aeb ]
The clang integrated assembler requires the 'cmp' instruction to have a length prefix here:
arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl') cmp $0xffffffff,-24(%ebp) ^
Make this a 32-bit comparison, which it was clearly meant to be.
Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Thomas Gleixner tglx@linutronix.de Reviewed-by: Nick Desaulniers ndesaulniers@google.com Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/math-emu/wm_sqrt.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/math-emu/wm_sqrt.S b/arch/x86/math-emu/wm_sqrt.S index f031c0e193565..515cdee90df72 100644 --- a/arch/x86/math-emu/wm_sqrt.S +++ b/arch/x86/math-emu/wm_sqrt.S @@ -209,7 +209,7 @@ sqrt_stage_2_finish:
#ifdef PARANOID /* It should be possible to get here only if the arg is ffff....ffff */ - cmp $0xffffffff,FPU_fsqrt_arg_1 + cmpl $0xffffffff,FPU_fsqrt_arg_1 jnz sqrt_stage_2_error #endif /* PARANOID */
From: Will Deacon will@kernel.org
[ Upstream commit bd024e82e4cd95c7f1a475a55f99871936c2b2db ]
Although mmiowb() is concerned only with serialising MMIO writes occuring in contexts where a spinlock is held, the call to mmiowb_set_pending() from the MMIO write accessors can occur in preemptible contexts, such as during driver probe() functions where ordering between CPUs is not usually a concern, assuming that the task migration path provides the necessary ordering guarantees.
Unfortunately, the default implementation of mmiowb_set_pending() is not preempt-safe, as it makes use of a a per-cpu variable to track its internal state. This has been reported to generate the following splat on riscv:
| BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 | caller is regmap_mmio_write32le+0x1c/0x46 | CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3-hfu+ #1 | Call Trace: | walk_stackframe+0x0/0x7a | dump_stack+0x6e/0x88 | regmap_mmio_write32le+0x18/0x46 | check_preemption_disabled+0xa4/0xaa | regmap_mmio_write32le+0x18/0x46 | regmap_mmio_write+0x26/0x44 | regmap_write+0x28/0x48 | sifive_gpio_probe+0xc0/0x1da
Although it's possible to fix the driver in this case, other splats have been seen from other drivers, including the infamous 8250 UART, and so it's better to address this problem in the mmiowb core itself.
Fix mmiowb_set_pending() by using the raw_cpu_ptr() to get at the mmiowb state and then only updating the 'mmiowb_pending' field if we are not preemptible (i.e. we have a non-zero nesting count).
Cc: Arnd Bergmann arnd@arndb.de Cc: Paul Walmsley paul.walmsley@sifive.com Cc: Guo Ren guoren@kernel.org Cc: Michael Ellerman mpe@ellerman.id.au Reported-by: Palmer Dabbelt palmer@dabbelt.com Reported-by: Emil Renner Berthing kernel@esmil.dk Tested-by: Emil Renner Berthing kernel@esmil.dk Reviewed-by: Palmer Dabbelt palmerdabbelt@google.com Acked-by: Palmer Dabbelt palmerdabbelt@google.com Link: https://lore.kernel.org/r/20200716112816.7356-1-will@kernel.org Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/asm-generic/mmiowb.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/include/asm-generic/mmiowb.h b/include/asm-generic/mmiowb.h index 9439ff037b2d1..5698fca3bf560 100644 --- a/include/asm-generic/mmiowb.h +++ b/include/asm-generic/mmiowb.h @@ -27,7 +27,7 @@ #include <asm/smp.h>
DECLARE_PER_CPU(struct mmiowb_state, __mmiowb_state); -#define __mmiowb_state() this_cpu_ptr(&__mmiowb_state) +#define __mmiowb_state() raw_cpu_ptr(&__mmiowb_state) #else #define __mmiowb_state() arch_mmiowb_state() #endif /* arch_mmiowb_state */ @@ -35,7 +35,9 @@ DECLARE_PER_CPU(struct mmiowb_state, __mmiowb_state); static inline void mmiowb_set_pending(void) { struct mmiowb_state *ms = __mmiowb_state(); - ms->mmiowb_pending = ms->nesting_count; + + if (likely(ms->nesting_count)) + ms->mmiowb_pending = ms->nesting_count; }
static inline void mmiowb_spin_lock(void)
From: Qi Liu liuqi115@huawei.com
[ Upstream commit f32ed8eb0e3f0d0ef4ddb854554d60ca5863a9f9 ]
Forcefully unbinding PMU drivers during perf sampling will lead to a kernel panic, because the perf upper-layer framework call a NULL pointer in this situation.
To solve this issue, "suppress_bind_attrs" should be set to true, so that bind/unbind can be disabled via sysfs and prevent unbinding PMU drivers during perf sampling.
Signed-off-by: Qi Liu liuqi115@huawei.com Reviewed-by: John Garry john.garry@huawei.com Link: https://lore.kernel.org/r/1594975763-32966-1-git-send-email-liuqi115@huawei.... Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/perf/arm-cci.c | 1 + drivers/perf/arm-ccn.c | 1 + drivers/perf/arm_dsu_pmu.c | 1 + drivers/perf/arm_smmuv3_pmu.c | 1 + drivers/perf/arm_spe_pmu.c | 1 + drivers/perf/fsl_imx8_ddr_perf.c | 1 + drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c | 1 + drivers/perf/hisilicon/hisi_uncore_hha_pmu.c | 1 + drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c | 1 + drivers/perf/qcom_l2_pmu.c | 1 + drivers/perf/qcom_l3_pmu.c | 1 + drivers/perf/thunderx2_pmu.c | 1 + drivers/perf/xgene_pmu.c | 1 + 13 files changed, 13 insertions(+)
diff --git a/drivers/perf/arm-cci.c b/drivers/perf/arm-cci.c index 8f8606b9bc9ee..aca4570f78a86 100644 --- a/drivers/perf/arm-cci.c +++ b/drivers/perf/arm-cci.c @@ -1720,6 +1720,7 @@ static struct platform_driver cci_pmu_driver = { .driver = { .name = DRIVER_NAME, .of_match_table = arm_cci_pmu_matches, + .suppress_bind_attrs = true, }, .probe = cci_pmu_probe, .remove = cci_pmu_remove, diff --git a/drivers/perf/arm-ccn.c b/drivers/perf/arm-ccn.c index 6fc0273b6129d..336948b41bd16 100644 --- a/drivers/perf/arm-ccn.c +++ b/drivers/perf/arm-ccn.c @@ -1545,6 +1545,7 @@ static struct platform_driver arm_ccn_driver = { .driver = { .name = "arm-ccn", .of_match_table = arm_ccn_match, + .suppress_bind_attrs = true, }, .probe = arm_ccn_probe, .remove = arm_ccn_remove, diff --git a/drivers/perf/arm_dsu_pmu.c b/drivers/perf/arm_dsu_pmu.c index 70968c8c09d7f..4594e2ed13d59 100644 --- a/drivers/perf/arm_dsu_pmu.c +++ b/drivers/perf/arm_dsu_pmu.c @@ -759,6 +759,7 @@ static struct platform_driver dsu_pmu_driver = { .driver = { .name = DRVNAME, .of_match_table = of_match_ptr(dsu_pmu_of_match), + .suppress_bind_attrs = true, }, .probe = dsu_pmu_device_probe, .remove = dsu_pmu_device_remove, diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c index f8fc1b612119c..9cdd89b29334e 100644 --- a/drivers/perf/arm_smmuv3_pmu.c +++ b/drivers/perf/arm_smmuv3_pmu.c @@ -861,6 +861,7 @@ static void smmu_pmu_shutdown(struct platform_device *pdev) static struct platform_driver smmu_pmu_driver = { .driver = { .name = "arm-smmu-v3-pmcg", + .suppress_bind_attrs = true, }, .probe = smmu_pmu_probe, .remove = smmu_pmu_remove, diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c index 4e4984a55cd1b..079701e8de186 100644 --- a/drivers/perf/arm_spe_pmu.c +++ b/drivers/perf/arm_spe_pmu.c @@ -1228,6 +1228,7 @@ static struct platform_driver arm_spe_pmu_driver = { .driver = { .name = DRVNAME, .of_match_table = of_match_ptr(arm_spe_pmu_of_match), + .suppress_bind_attrs = true, }, .probe = arm_spe_pmu_device_probe, .remove = arm_spe_pmu_device_remove, diff --git a/drivers/perf/fsl_imx8_ddr_perf.c b/drivers/perf/fsl_imx8_ddr_perf.c index b241db6929c08..09f44c6e2eaf6 100644 --- a/drivers/perf/fsl_imx8_ddr_perf.c +++ b/drivers/perf/fsl_imx8_ddr_perf.c @@ -646,6 +646,7 @@ static struct platform_driver imx_ddr_pmu_driver = { .driver = { .name = "imx-ddr-pmu", .of_match_table = imx_ddr_pmu_dt_ids, + .suppress_bind_attrs = true, }, .probe = ddr_perf_probe, .remove = ddr_perf_remove, diff --git a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c index 64712cf2f99ad..b79c96b14328b 100644 --- a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c @@ -420,6 +420,7 @@ static struct platform_driver hisi_ddrc_pmu_driver = { .driver = { .name = "hisi_ddrc_pmu", .acpi_match_table = ACPI_PTR(hisi_ddrc_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = hisi_ddrc_pmu_probe, .remove = hisi_ddrc_pmu_remove, diff --git a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c index a4004dad6bf1c..78865b4ac4a6f 100644 --- a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c @@ -431,6 +431,7 @@ static struct platform_driver hisi_hha_pmu_driver = { .driver = { .name = "hisi_hha_pmu", .acpi_match_table = ACPI_PTR(hisi_hha_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = hisi_hha_pmu_probe, .remove = hisi_hha_pmu_remove, diff --git a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c index 2f3f291b0c2ed..9dd50c3bc74ec 100644 --- a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c @@ -421,6 +421,7 @@ static struct platform_driver hisi_l3c_pmu_driver = { .driver = { .name = "hisi_l3c_pmu", .acpi_match_table = ACPI_PTR(hisi_l3c_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = hisi_l3c_pmu_probe, .remove = hisi_l3c_pmu_remove, diff --git a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c index 21d6991dbe0ba..4da37f650f983 100644 --- a/drivers/perf/qcom_l2_pmu.c +++ b/drivers/perf/qcom_l2_pmu.c @@ -1028,6 +1028,7 @@ static struct platform_driver l2_cache_pmu_driver = { .driver = { .name = "qcom-l2cache-pmu", .acpi_match_table = ACPI_PTR(l2_cache_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = l2_cache_pmu_probe, .remove = l2_cache_pmu_remove, diff --git a/drivers/perf/qcom_l3_pmu.c b/drivers/perf/qcom_l3_pmu.c index 656e830798d9e..9ddb577c542b5 100644 --- a/drivers/perf/qcom_l3_pmu.c +++ b/drivers/perf/qcom_l3_pmu.c @@ -814,6 +814,7 @@ static struct platform_driver qcom_l3_cache_pmu_driver = { .driver = { .name = "qcom-l3cache-pmu", .acpi_match_table = ACPI_PTR(qcom_l3_cache_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = qcom_l3_cache_pmu_probe, }; diff --git a/drivers/perf/thunderx2_pmu.c b/drivers/perf/thunderx2_pmu.c index 43d76c85da56b..9e1c3c7eeba9b 100644 --- a/drivers/perf/thunderx2_pmu.c +++ b/drivers/perf/thunderx2_pmu.c @@ -816,6 +816,7 @@ static struct platform_driver tx2_uncore_driver = { .driver = { .name = "tx2-uncore-pmu", .acpi_match_table = ACPI_PTR(tx2_uncore_acpi_match), + .suppress_bind_attrs = true, }, .probe = tx2_uncore_probe, .remove = tx2_uncore_remove, diff --git a/drivers/perf/xgene_pmu.c b/drivers/perf/xgene_pmu.c index 7e328d6385c37..328aea9f6be32 100644 --- a/drivers/perf/xgene_pmu.c +++ b/drivers/perf/xgene_pmu.c @@ -1981,6 +1981,7 @@ static struct platform_driver xgene_pmu_driver = { .name = "xgene-pmu", .of_match_table = xgene_pmu_of_match, .acpi_match_table = ACPI_PTR(xgene_pmu_acpi_match), + .suppress_bind_attrs = true, }, };
From: Palmer Dabbelt palmerdabbelt@google.com
[ Upstream commit 38b7c2a3ffb1fce8358ddc6006cfe5c038ff9963 ]
While digging through the recent mmiowb preemption issue it came up that we aren't actually preventing IO from crossing a scheduling boundary. While it's a bit ugly to overload smp_mb__after_spinlock() with this behavior, it's what PowerPC is doing so there's some precedent.
Signed-off-by: Palmer Dabbelt palmerdabbelt@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/include/asm/barrier.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/include/asm/barrier.h b/arch/riscv/include/asm/barrier.h index 3f1737f301ccb..d0e24aaa2aa06 100644 --- a/arch/riscv/include/asm/barrier.h +++ b/arch/riscv/include/asm/barrier.h @@ -58,8 +58,16 @@ do { \ * The AQ/RL pair provides a RCpc critical section, but there's not really any * way we can take advantage of that here because the ordering is only enforced * on that one lock. Thus, we're just doing a full fence. + * + * Since we allow writeX to be called from preemptive regions we need at least + * an "o" in the predecessor set to ensure device writes are visible before the + * task is marked as available for scheduling on a new hart. While I don't see + * any concrete reason we need a full IO fence, it seems safer to just upgrade + * this in order to avoid any IO crossing a scheduling boundary. In both + * instances the scheduler pairs this with an mb(), so nothing is necessary on + * the new hart. */ -#define smp_mb__after_spinlock() RISCV_FENCE(rw,rw) +#define smp_mb__after_spinlock() RISCV_FENCE(iorw,iorw)
#include <asm-generic/barrier.h>
From: Olga Kornievskaia kolga@netapp.com
[ Upstream commit 65caafd0d2145d1dd02072c4ced540624daeab40 ]
Reverting commit d03727b248d0 "NFSv4 fix CLOSE not waiting for direct IO compeletion". This patch made it so that fput() by calling inode_dio_done() in nfs_file_release() would wait uninterruptably for any outstanding directIO to the file (but that wait on IO should be killable).
The problem the patch was also trying to address was REMOVE returning ERR_ACCESS because the file is still opened, is supposed to be resolved by server returning ERR_FILE_OPEN and not ERR_ACCESS.
Signed-off-by: Olga Kornievskaia kolga@netapp.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/direct.c | 13 ++++--------- fs/nfs/file.c | 1 - 2 files changed, 4 insertions(+), 10 deletions(-)
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 70cf8c5760c73..6b0bf4ebd8124 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -367,6 +367,8 @@ static void nfs_direct_complete(struct nfs_direct_req *dreq) { struct inode *inode = dreq->inode;
+ inode_dio_end(inode); + if (dreq->iocb) { long res = (long) dreq->error; if (dreq->count != 0) { @@ -378,10 +380,7 @@ static void nfs_direct_complete(struct nfs_direct_req *dreq)
complete(&dreq->completion);
- igrab(inode); nfs_direct_req_release(dreq); - inode_dio_end(inode); - iput(inode); }
static void nfs_direct_read_completion(struct nfs_pgio_header *hdr) @@ -511,10 +510,8 @@ static ssize_t nfs_direct_read_schedule_iovec(struct nfs_direct_req *dreq, * generic layer handle the completion. */ if (requested_bytes == 0) { - igrab(inode); - nfs_direct_req_release(dreq); inode_dio_end(inode); - iput(inode); + nfs_direct_req_release(dreq); return result < 0 ? result : -EIO; }
@@ -926,10 +923,8 @@ static ssize_t nfs_direct_write_schedule_iovec(struct nfs_direct_req *dreq, * generic layer handle the completion. */ if (requested_bytes == 0) { - igrab(inode); - nfs_direct_req_release(dreq); inode_dio_end(inode); - iput(inode); + nfs_direct_req_release(dreq); return result < 0 ? result : -EIO; }
diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 7b31367532054..95dc90570786c 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -83,7 +83,6 @@ nfs_file_release(struct inode *inode, struct file *filp) dprintk("NFS: release(%pD2)\n", filp);
nfs_inc_stats(inode, NFSIOS_VFSRELEASE); - inode_dio_wait(inode); nfs_file_clear_open_context(filp); return 0; }
linux-stable-mirror@lists.linaro.org
-
Sasha Levin