From: Mikulas Patocka mpatocka@redhat.com

[ Upstream commit ae1093be5a0ef997833e200a0dafb9ed0b1ff4fe ]

The rw_semaphore is acquired for read only in two places, neither is performance-critical. So replace it with a mutex -- which is more efficient.

Signed-off-by: Mikulas Patocka mpatocka@redhat.com Signed-off-by: Mike Snitzer snitzer@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-snap.c | 84 +++++++++++++++++++++++--------------------- 1 file changed, 43 insertions(+), 41 deletions(-)

diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index b502debc6df3f..8b1556e77a0a0 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -48,7 +48,7 @@ struct dm_exception_table { };

struct dm_snapshot { - struct rw_semaphore lock; + struct mutex lock;

struct dm_dev *origin; struct dm_dev *cow; @@ -456,9 +456,9 @@ static int __find_snapshots_sharing_cow(struct dm_snapshot *snap, if (!bdev_equal(s->cow->bdev, snap->cow->bdev)) continue;

- down_read(&s->lock); + mutex_lock(&s->lock); active = s->active; - up_read(&s->lock); + mutex_unlock(&s->lock);

if (active) { if (snap_src) @@ -926,7 +926,7 @@ static int remove_single_exception_chunk(struct dm_snapshot *s) int r; chunk_t old_chunk = s->first_merging_chunk + s->num_merging_chunks - 1;

- down_write(&s->lock); + mutex_lock(&s->lock);

/* * Process chunks (and associated exceptions) in reverse order @@ -941,7 +941,7 @@ static int remove_single_exception_chunk(struct dm_snapshot *s) b = __release_queued_bios_after_merge(s);

out: - up_write(&s->lock); + mutex_unlock(&s->lock); if (b) flush_bios(b);

@@ -1000,9 +1000,9 @@ static void snapshot_merge_next_chunks(struct dm_snapshot *s) if (linear_chunks < 0) { DMERR("Read error in exception store: " "shutting down merge"); - down_write(&s->lock); + mutex_lock(&s->lock); s->merge_failed = 1; - up_write(&s->lock); + mutex_unlock(&s->lock); } goto shut; } @@ -1043,10 +1043,10 @@ static void snapshot_merge_next_chunks(struct dm_snapshot *s) previous_count = read_pending_exceptions_done_count(); }

- down_write(&s->lock); + mutex_lock(&s->lock); s->first_merging_chunk = old_chunk; s->num_merging_chunks = linear_chunks; - up_write(&s->lock); + mutex_unlock(&s->lock);

/* Wait until writes to all 'linear_chunks' drain */ for (i = 0; i < linear_chunks; i++) @@ -1088,10 +1088,10 @@ static void merge_callback(int read_err, unsigned long write_err, void *context) return;

shut: - down_write(&s->lock); + mutex_lock(&s->lock); s->merge_failed = 1; b = __release_queued_bios_after_merge(s); - up_write(&s->lock); + mutex_unlock(&s->lock); error_bios(b);

merge_shutdown(s); @@ -1190,7 +1190,7 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) s->exception_start_sequence = 0; s->exception_complete_sequence = 0; INIT_LIST_HEAD(&s->out_of_order_list); - init_rwsem(&s->lock); + mutex_init(&s->lock); INIT_LIST_HEAD(&s->list); spin_lock_init(&s->pe_lock); s->state_bits = 0; @@ -1357,9 +1357,9 @@ static void snapshot_dtr(struct dm_target *ti) /* Check whether exception handover must be cancelled */ (void) __find_snapshots_sharing_cow(s, &snap_src, &snap_dest, NULL); if (snap_src && snap_dest && (s == snap_src)) { - down_write(&snap_dest->lock); + mutex_lock(&snap_dest->lock); snap_dest->valid = 0; - up_write(&snap_dest->lock); + mutex_unlock(&snap_dest->lock); DMERR("Cancelling snapshot handover."); } up_read(&_origins_lock); @@ -1390,6 +1390,8 @@ static void snapshot_dtr(struct dm_target *ti)

dm_exception_store_destroy(s->store);

+ mutex_destroy(&s->lock); + dm_put_device(ti, s->cow);

dm_put_device(ti, s->origin); @@ -1477,7 +1479,7 @@ static void pending_complete(void *context, int success)

if (!success) { /* Read/write error - snapshot is unusable */ - down_write(&s->lock); + mutex_lock(&s->lock); __invalidate_snapshot(s, -EIO); error = 1; goto out; @@ -1485,14 +1487,14 @@ static void pending_complete(void *context, int success)

e = alloc_completed_exception(GFP_NOIO); if (!e) { - down_write(&s->lock); + mutex_lock(&s->lock); __invalidate_snapshot(s, -ENOMEM); error = 1; goto out; } *e = pe->e;

- down_write(&s->lock); + mutex_lock(&s->lock); if (!s->valid) { free_completed_exception(e); error = 1; @@ -1517,7 +1519,7 @@ out: full_bio->bi_end_io = pe->full_bio_end_io; increment_pending_exceptions_done_count();

- up_write(&s->lock); + mutex_unlock(&s->lock);

/* Submit any pending write bios */ if (error) { @@ -1716,7 +1718,7 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio)

/* FIXME: should only take write lock if we need * to copy an exception */ - down_write(&s->lock); + mutex_lock(&s->lock);

if (!s->valid || (unlikely(s->snapshot_overflowed) && bio_data_dir(bio) == WRITE)) { @@ -1739,9 +1741,9 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio) if (bio_data_dir(bio) == WRITE) { pe = __lookup_pending_exception(s, chunk); if (!pe) { - up_write(&s->lock); + mutex_unlock(&s->lock); pe = alloc_pending_exception(s); - down_write(&s->lock); + mutex_lock(&s->lock);

if (!s->valid || s->snapshot_overflowed) { free_pending_exception(pe); @@ -1776,7 +1778,7 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio) bio->bi_iter.bi_size == (s->store->chunk_size << SECTOR_SHIFT)) { pe->started = 1; - up_write(&s->lock); + mutex_unlock(&s->lock); start_full_bio(pe, bio); goto out; } @@ -1786,7 +1788,7 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio) if (!pe->started) { /* this is protected by snap->lock */ pe->started = 1; - up_write(&s->lock); + mutex_unlock(&s->lock); start_copy(pe); goto out; } @@ -1796,7 +1798,7 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio) }

out_unlock: - up_write(&s->lock); + mutex_unlock(&s->lock); out: return r; } @@ -1832,7 +1834,7 @@ static int snapshot_merge_map(struct dm_target *ti, struct bio *bio)

chunk = sector_to_chunk(s->store, bio->bi_iter.bi_sector);

- down_write(&s->lock); + mutex_lock(&s->lock);

/* Full merging snapshots are redirected to the origin */ if (!s->valid) @@ -1863,12 +1865,12 @@ redirect_to_origin: bio_set_dev(bio, s->origin->bdev);

if (bio_data_dir(bio) == WRITE) { - up_write(&s->lock); + mutex_unlock(&s->lock); return do_origin(s->origin, bio); }

out_unlock: - up_write(&s->lock); + mutex_unlock(&s->lock);

return r; } @@ -1900,7 +1902,7 @@ static int snapshot_preresume(struct dm_target *ti) down_read(&_origins_lock); (void) __find_snapshots_sharing_cow(s, &snap_src, &snap_dest, NULL); if (snap_src && snap_dest) { - down_read(&snap_src->lock); + mutex_lock(&snap_src->lock); if (s == snap_src) { DMERR("Unable to resume snapshot source until " "handover completes."); @@ -1910,7 +1912,7 @@ static int snapshot_preresume(struct dm_target *ti) "source is suspended."); r = -EINVAL; } - up_read(&snap_src->lock); + mutex_unlock(&snap_src->lock); } up_read(&_origins_lock);

@@ -1956,11 +1958,11 @@ static void snapshot_resume(struct dm_target *ti)

(void) __find_snapshots_sharing_cow(s, &snap_src, &snap_dest, NULL); if (snap_src && snap_dest) { - down_write(&snap_src->lock); - down_write_nested(&snap_dest->lock, SINGLE_DEPTH_NESTING); + mutex_lock(&snap_src->lock); + mutex_lock_nested(&snap_dest->lock, SINGLE_DEPTH_NESTING); __handover_exceptions(snap_src, snap_dest); - up_write(&snap_dest->lock); - up_write(&snap_src->lock); + mutex_unlock(&snap_dest->lock); + mutex_unlock(&snap_src->lock); }

up_read(&_origins_lock); @@ -1975,9 +1977,9 @@ static void snapshot_resume(struct dm_target *ti) /* Now we have correct chunk size, reregister */ reregister_snapshot(s);

- down_write(&s->lock); + mutex_lock(&s->lock); s->active = 1; - up_write(&s->lock); + mutex_unlock(&s->lock); }

static uint32_t get_origin_minimum_chunksize(struct block_device *bdev) @@ -2017,7 +2019,7 @@ static void snapshot_status(struct dm_target *ti, status_type_t type, switch (type) { case STATUSTYPE_INFO:

- down_write(&snap->lock); + mutex_lock(&snap->lock);

if (!snap->valid) DMEMIT("Invalid"); @@ -2042,7 +2044,7 @@ static void snapshot_status(struct dm_target *ti, status_type_t type, DMEMIT("Unknown"); }

- up_write(&snap->lock); + mutex_unlock(&snap->lock);

break;

@@ -2108,7 +2110,7 @@ static int __origin_write(struct list_head *snapshots, sector_t sector, if (dm_target_is_snapshot_merge(snap->ti)) continue;

- down_write(&snap->lock); + mutex_lock(&snap->lock);

/* Only deal with valid and active snapshots */ if (!snap->valid || !snap->active) @@ -2135,9 +2137,9 @@ static int __origin_write(struct list_head *snapshots, sector_t sector,

pe = __lookup_pending_exception(snap, chunk); if (!pe) { - up_write(&snap->lock); + mutex_unlock(&snap->lock); pe = alloc_pending_exception(snap); - down_write(&snap->lock); + mutex_lock(&snap->lock);

if (!snap->valid) { free_pending_exception(pe); @@ -2180,7 +2182,7 @@ static int __origin_write(struct list_head *snapshots, sector_t sector, }

next_snapshot: - up_write(&snap->lock); + mutex_unlock(&snap->lock);

if (pe_to_start_now) { start_copy(pe_to_start_now);

From: Mikulas Patocka mpatocka@redhat.com

[ Upstream commit b21555786f18cd77f2311ad89074533109ae3ffa ]

Commit 721b1d98fb517a ("dm snapshot: Fix excessive memory usage and workqueue stalls") introduced a semaphore to limit the maximum number of in-flight kcopyd (COW) jobs.

The implementation of this throttling mechanism is prone to a deadlock:

1. One or more threads write to the origin device causing COW, which is performed by kcopyd.

2. At some point some of these threads might reach the s->cow_count semaphore limit and block in down(&s->cow_count), holding a read lock on _origins_lock.

3. Someone tries to acquire a write lock on _origins_lock, e.g., snapshot_ctr(), which blocks because the threads at step (2) already hold a read lock on it.

4. A COW operation completes and kcopyd runs dm-snapshot's completion callback, which ends up calling pending_complete(). pending_complete() tries to resubmit any deferred origin bios. This requires acquiring a read lock on _origins_lock, which blocks.

This happens because the read-write semaphore implementation gives priority to writers, meaning that as soon as a writer tries to enter the critical section, no readers will be allowed in, until all writers have completed their work.

So, pending_complete() waits for the writer at step (3) to acquire and release the lock. This writer waits for the readers at step (2) to release the read lock and those readers wait for pending_complete() (the kcopyd thread) to signal the s->cow_count semaphore: DEADLOCK.

The above was thoroughly analyzed and documented by Nikos Tsironis as part of his initial proposal for fixing this deadlock, see: https://www.redhat.com/archives/dm-devel/2019-October/msg00001.html

Fix this deadlock by reworking COW throttling so that it waits without holding any locks. Add a variable 'in_progress' that counts how many kcopyd jobs are running. A function wait_for_in_progress() will sleep if 'in_progress' is over the limit. It drops _origins_lock in order to avoid the deadlock.

Reported-by: Guruswamy Basavaiah guru2018@gmail.com Reported-by: Nikos Tsironis ntsironis@arrikto.com Reviewed-by: Nikos Tsironis ntsironis@arrikto.com Tested-by: Nikos Tsironis ntsironis@arrikto.com Fixes: 721b1d98fb51 ("dm snapshot: Fix excessive memory usage and workqueue stalls") Cc: stable@vger.kernel.org # v5.0+ Depends-on: 4a3f111a73a8c ("dm snapshot: introduce account_start_copy() and account_end_copy()") Signed-off-by: Mikulas Patocka mpatocka@redhat.com Signed-off-by: Mike Snitzer snitzer@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-snap.c | 80 +++++++++++++++++++++++++++++++++++--------- 1 file changed, 64 insertions(+), 16 deletions(-)

diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index a9575122a0c6e..95c564b60d79a 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -19,7 +19,6 @@ #include <linux/vmalloc.h> #include <linux/log2.h> #include <linux/dm-kcopyd.h> -#include <linux/semaphore.h>

#include "dm.h"

@@ -106,8 +105,8 @@ struct dm_snapshot { /* The on disk metadata handler */ struct dm_exception_store *store;

- /* Maximum number of in-flight COW jobs. */ - struct semaphore cow_count; + unsigned in_progress; + struct wait_queue_head in_progress_wait;

struct dm_kcopyd_client *kcopyd_client;

@@ -158,8 +157,8 @@ struct dm_snapshot { */ #define DEFAULT_COW_THRESHOLD 2048

-static int cow_threshold = DEFAULT_COW_THRESHOLD; -module_param_named(snapshot_cow_threshold, cow_threshold, int, 0644); +static unsigned cow_threshold = DEFAULT_COW_THRESHOLD; +module_param_named(snapshot_cow_threshold, cow_threshold, uint, 0644); MODULE_PARM_DESC(snapshot_cow_threshold, "Maximum number of chunks being copied on write");

DECLARE_DM_KCOPYD_THROTTLE_WITH_MODULE_PARM(snapshot_copy_throttle, @@ -1206,7 +1205,7 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad_hash_tables; }

- sema_init(&s->cow_count, (cow_threshold > 0) ? cow_threshold : INT_MAX); + init_waitqueue_head(&s->in_progress_wait);

s->kcopyd_client = dm_kcopyd_client_create(&dm_kcopyd_throttle); if (IS_ERR(s->kcopyd_client)) { @@ -1396,17 +1395,54 @@ static void snapshot_dtr(struct dm_target *ti)

dm_put_device(ti, s->origin);

+ WARN_ON(s->in_progress); + kfree(s); }

static void account_start_copy(struct dm_snapshot *s) { - down(&s->cow_count); + spin_lock(&s->in_progress_wait.lock); + s->in_progress++; + spin_unlock(&s->in_progress_wait.lock); }

static void account_end_copy(struct dm_snapshot *s) { - up(&s->cow_count); + spin_lock(&s->in_progress_wait.lock); + BUG_ON(!s->in_progress); + s->in_progress--; + if (likely(s->in_progress <= cow_threshold) && + unlikely(waitqueue_active(&s->in_progress_wait))) + wake_up_locked(&s->in_progress_wait); + spin_unlock(&s->in_progress_wait.lock); +} + +static bool wait_for_in_progress(struct dm_snapshot *s, bool unlock_origins) +{ + if (unlikely(s->in_progress > cow_threshold)) { + spin_lock(&s->in_progress_wait.lock); + if (likely(s->in_progress > cow_threshold)) { + /* + * NOTE: this throttle doesn't account for whether + * the caller is servicing an IO that will trigger a COW + * so excess throttling may result for chunks not required + * to be COW'd. But if cow_threshold was reached, extra + * throttling is unlikely to negatively impact performance. + */ + DECLARE_WAITQUEUE(wait, current); + __add_wait_queue(&s->in_progress_wait, &wait); + __set_current_state(TASK_UNINTERRUPTIBLE); + spin_unlock(&s->in_progress_wait.lock); + if (unlock_origins) + up_read(&_origins_lock); + io_schedule(); + remove_wait_queue(&s->in_progress_wait, &wait); + return false; + } + spin_unlock(&s->in_progress_wait.lock); + } + return true; }

/* @@ -1424,7 +1460,7 @@ static void flush_bios(struct bio *bio) } }

-static int do_origin(struct dm_dev *origin, struct bio *bio); +static int do_origin(struct dm_dev *origin, struct bio *bio, bool limit);

/* * Flush a list of buffers. @@ -1437,7 +1473,7 @@ static void retry_origin_bios(struct dm_snapshot *s, struct bio *bio) while (bio) { n = bio->bi_next; bio->bi_next = NULL; - r = do_origin(s->origin, bio); + r = do_origin(s->origin, bio, false); if (r == DM_MAPIO_REMAPPED) generic_make_request(bio); bio = n; @@ -1726,8 +1762,11 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio) if (!s->valid) return DM_MAPIO_KILL;

- /* FIXME: should only take write lock if we need - * to copy an exception */ + if (bio_data_dir(bio) == WRITE) { + while (unlikely(!wait_for_in_progress(s, false))) + ; /* wait_for_in_progress() has slept */ + } + mutex_lock(&s->lock);

if (!s->valid || (unlikely(s->snapshot_overflowed) && @@ -1876,7 +1915,7 @@ redirect_to_origin:

if (bio_data_dir(bio) == WRITE) { mutex_unlock(&s->lock); - return do_origin(s->origin, bio); + return do_origin(s->origin, bio, false); }

out_unlock: @@ -2213,15 +2252,24 @@ next_snapshot: /* * Called on a write from the origin driver. */ -static int do_origin(struct dm_dev *origin, struct bio *bio) +static int do_origin(struct dm_dev *origin, struct bio *bio, bool limit) { struct origin *o; int r = DM_MAPIO_REMAPPED;

+again: down_read(&_origins_lock); o = __lookup_origin(origin->bdev); - if (o) + if (o) { + if (limit) { + struct dm_snapshot *s; + list_for_each_entry(s, &o->snapshots, list) + if (unlikely(!wait_for_in_progress(s, true))) + goto again; + } + r = __origin_write(&o->snapshots, bio->bi_iter.bi_sector, bio); + } up_read(&_origins_lock);

return r; @@ -2334,7 +2382,7 @@ static int origin_map(struct dm_target *ti, struct bio *bio) dm_accept_partial_bio(bio, available_sectors);

/* Only tell snapshots if this is a write */ - return do_origin(o->dev, bio); + return do_origin(o->dev, bio, true); }

static long origin_dax_direct_access(struct dm_target *ti, pgoff_t pgoff,

From: Jaegeuk Kim jaegeuk@kernel.org

[ Upstream commit 0e0667b625cf64243df83171bff61f9d350b9ca5 ]

After quota_off, we'll get some dirty blocks. If put_super don't have a chance to flush them by checkpoint, it causes NULL pointer exception in end_io after iput(node_inode). (e.g., by checkpoint=disable)

Reviewed-by: Chao Yu yuchao0@huawei.com Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/f2fs/super.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index e70975ca723b7..0f3209b23c940 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -1523,6 +1523,12 @@ void f2fs_quota_off_umount(struct super_block *sb) set_sbi_flag(F2FS_SB(sb), SBI_NEED_FSCK); } } + /* + * In case of checkpoint=disable, we must flush quota blocks. + * This can cause NULL exception for node_inode in end_io, since + * put_super already dropped it. + */ + sync_filesystem(sb); }

int f2fs_get_projid(struct inode *inode, kprojid_t *projid)

From: Phil Elwell phil@raspberrypi.org

[ Upstream commit 30ec514d440cf2c472c8e4b0079af2c731f71a3e ]

The SC16IS752 has an Enhanced Feature Register which is aliased at the same address as the Interrupt Identification Register; accessing it requires that a magic value is written to the Line Configuration Register. If an interrupt is raised while the EFR is mapped in then the ISR won't be able to access the IIR, leading to the "Unexpected interrupt" error messages.

Avoid the problem by claiming a mutex around accesses to the EFR register, also claiming the mutex in the interrupt handler work item (this is equivalent to disabling interrupts to interlock against a non-threaded interrupt handler).

See: https://github.com/raspberrypi/linux/issues/2529

Signed-off-by: Phil Elwell phil@raspberrypi.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/sc16is7xx.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index e48523da47ac9..c1655aba131f6 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -333,6 +333,7 @@ struct sc16is7xx_port { struct kthread_worker kworker; struct task_struct *kworker_task; struct kthread_work irq_work; + struct mutex efr_lock; struct sc16is7xx_one p[0]; };

@@ -504,6 +505,21 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud) div /= 4; }

+ /* In an amazing feat of design, the Enhanced Features Register shares + * the address of the Interrupt Identification Register, and is + * switched in by writing a magic value (0xbf) to the Line Control + * Register. Any interrupt firing during this time will see the EFR + * where it expects the IIR to be, leading to "Unexpected interrupt" + * messages. + * + * Prevent this possibility by claiming a mutex while accessing the + * EFR, and claiming the same mutex from within the interrupt handler. + * This is similar to disabling the interrupt, but that doesn't work + * because the bulk of the interrupt processing is run as a workqueue + * job in thread context. + */ + mutex_lock(&s->efr_lock); + lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG);

/* Open the LCR divisors for configuration */ @@ -519,6 +535,8 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud) /* Put LCR back to the normal mode */ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);

+ mutex_unlock(&s->efr_lock); + sc16is7xx_port_update(port, SC16IS7XX_MCR_REG, SC16IS7XX_MCR_CLKSEL_BIT, prescaler); @@ -701,6 +719,8 @@ static void sc16is7xx_ist(struct kthread_work *ws) { struct sc16is7xx_port *s = to_sc16is7xx_port(ws, irq_work);

+ mutex_lock(&s->efr_lock); + while (1) { bool keep_polling = false; int i; @@ -710,6 +730,8 @@ static void sc16is7xx_ist(struct kthread_work *ws) if (!keep_polling) break; } + + mutex_unlock(&s->efr_lock); }

static irqreturn_t sc16is7xx_irq(int irq, void *dev_id) @@ -904,6 +926,9 @@ static void sc16is7xx_set_termios(struct uart_port *port, if (!(termios->c_cflag & CREAD)) port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK;

+ /* As above, claim the mutex while accessing the EFR. */ + mutex_lock(&s->efr_lock); + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_CONF_MODE_B);

@@ -925,6 +950,8 @@ static void sc16is7xx_set_termios(struct uart_port *port, /* Update LCR register */ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);

+ mutex_unlock(&s->efr_lock); + /* Get baud rate generator configuration */ baud = uart_get_baud_rate(port, termios, old, port->uartclk / 16 / 4 / 0xffff, @@ -1187,6 +1214,7 @@ static int sc16is7xx_probe(struct device *dev, s->regmap = regmap; s->devtype = devtype; dev_set_drvdata(dev, s); + mutex_init(&s->efr_lock);

kthread_init_worker(&s->kworker); kthread_init_work(&s->irq_work, sc16is7xx_ist);

From: Julian Sax jsbc@gmx.de

[ Upstream commit 399474e4c1100bca264ed14fa3ad0d68fab484d8 ]

This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list.

Reported-by: Tim Aldridge taldridge@mac.com Signed-off-by: Julian Sax jsbc@gmx.de Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c index cac262a912c12..89f2976f9c534 100644 --- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c @@ -330,6 +330,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = { }, .driver_data = (void *)&sipodev_desc }, + { + .ident = "Direkt-Tek DTLAPY133-1", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Direkt-Tek"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "DTLAPY133-1"), + }, + .driver_data = (void *)&sipodev_desc + }, { .ident = "Mediacom Flexbook Edge 11", .matches = {

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit f8f807441eefddc3c6d8a378421f0ede6361d565 ]

The Odys Winbook 13 uses a SIPODEV SP1064 touchpad, which does not supply descriptors, add this to the DMI descriptor override list, fixing the touchpad not working.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1526312 Reported-by: Rene Wagner redhatbugzilla@callerid.de Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c index 89f2976f9c534..fd1b6eea6d2fd 100644 --- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c @@ -346,6 +346,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = { }, .driver_data = (void *)&sipodev_desc }, + { + .ident = "Odys Winbook 13", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AXDIA International GmbH"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "WINBOOK 13"), + }, + .driver_data = (void *)&sipodev_desc + }, { } /* Terminate list */ };

From: Brian Norris briannorris@chromium.org

[ Upstream commit ff64dd4857303dd5550faed9fd598ac90f0f2238 ]

git-diff-index does not refresh the index for you, so using it for a "-dirty" check can give misleading results. Commit 6147b1cf19651 ("scripts/setlocalversion: git: Make -dirty check more robust") tried to fix this by switching to git-status, but it overlooked the fact that git-status also writes to the .git directory of the source tree, which is definitely not kosher for an out-of-tree (O=) build. That is getting reverted.

Fortunately, git-status now supports avoiding writing to the index via the --no-optional-locks flag, as of git 2.14. It still calculates an up-to-date index, but it avoids writing it out to the .git directory.

So, let's retry the solution from commit 6147b1cf19651 using this new flag first, and if it fails, we assume this is an older version of git and just use the old git-diff-index method.

It's hairy to get the 'grep -vq' (inverted matching) correct by stashing the output of git-status (you have to be careful about the difference betwen "empty stdin" and "blank line on stdin"), so just pipe the output directly to grep and use a regex that's good enough for both the git-status and git-diff-index version.

Cc: Christian Kujau lists@nerdbynature.de Cc: Guenter Roeck linux@roeck-us.net Suggested-by: Alexander Kapshuk alexander.kapshuk@gmail.com Signed-off-by: Brian Norris briannorris@chromium.org Tested-by: Genki Sky sky@genki.is Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/setlocalversion | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/scripts/setlocalversion b/scripts/setlocalversion index 71f39410691b6..365b3c2b8f431 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -73,8 +73,16 @@ scm_version() printf -- '-svn%s' "`git svn find-rev $head`" fi

- # Check for uncommitted changes - if git diff-index --name-only HEAD | grep -qv "^scripts/package"; then + # Check for uncommitted changes. + # First, with git-status, but --no-optional-locks is only + # supported in git >= 2.14, so fall back to git-diff-index if + # it fails. Note that git-diff-index does not refresh the + # index, so it may give misleading results. See + # git-update-index(1), git-diff-index(1), and git-status(1). + if { + git --no-optional-locks status -uno --porcelain 2>/dev/null || + git diff-index --name-only HEAD + } | grep -qvE '^(.. )?scripts/package'; then printf '%s' -dirty fi

From: Jan-Marek Glogowski glogow@fbihome.de

[ Upstream commit 4fdc1790e6a9ef22399c6bc6e63b80f4609f3b7e ]

On plug-in of my USB-C device, its USB_SS_PORT_LS_SS_INACTIVE link state bit is set. Greping all the kernel for this bit shows that the port status requests a warm-reset this way.

This just happens, if its the only device on the root hub, the hub therefore resumes and the HCDs status_urb isn't yet available. If a warm-reset request is detected, this sets the hubs event_bits, which will prevent any auto-suspend and allows the hubs workqueue to warm-reset the port later in port_event.

Signed-off-by: Jan-Marek Glogowski glogow@fbihome.de Acked-by: Alan Stern stern@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/core/hub.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b543a4730ef24..bb20aa433e984 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -104,6 +104,8 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); static void hub_release(struct kref *kref); static int usb_reset_and_verify_device(struct usb_device *udev); static int hub_port_disable(struct usb_hub *hub, int port1, int set_state); +static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1, + u16 portstatus);

static inline char *portspeed(struct usb_hub *hub, int portstatus) { @@ -1110,6 +1112,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) USB_PORT_FEAT_ENABLE); }

+ /* Make sure a warm-reset request is handled by port_event */ + if (type == HUB_RESUME && + hub_port_warm_reset_required(hub, port1, portstatus)) + set_bit(port1, hub->event_bits); + /* * Add debounce if USB3 link is in polling/link training state. * Link will automatically transition to Enabled state after

From: Nir Dotan nird@mellanox.com

[ Upstream commit 48ebab31d424fbdb8ede8914923bec671a933246 ]

The LAG port collecting (receive) function was mistakenly set when the port was registered as a LAG member, while it should be set only when the port collection state is set to true. Set LAG port to collecting when it is set to distributing, as described in the IEEE link aggregation standard coupled control mux machine state diagram.

Signed-off-by: Nir Dotan nird@mellanox.com Acked-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/mellanox/mlxsw/spectrum.c | 62 ++++++++++++++----- 1 file changed, 45 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 5c74787f903b7..a909aa315a92a 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -4077,9 +4077,6 @@ static int mlxsw_sp_port_lag_join(struct mlxsw_sp_port *mlxsw_sp_port, err = mlxsw_sp_lag_col_port_add(mlxsw_sp_port, lag_id, port_index); if (err) goto err_col_port_add; - err = mlxsw_sp_lag_col_port_enable(mlxsw_sp_port, lag_id); - if (err) - goto err_col_port_enable;

mlxsw_core_lag_mapping_set(mlxsw_sp->core, lag_id, port_index, mlxsw_sp_port->local_port); @@ -4094,8 +4091,6 @@ static int mlxsw_sp_port_lag_join(struct mlxsw_sp_port *mlxsw_sp_port,

return 0;

-err_col_port_enable: - mlxsw_sp_lag_col_port_remove(mlxsw_sp_port, lag_id); err_col_port_add: if (!lag->ref_count) mlxsw_sp_lag_destroy(mlxsw_sp, lag_id); @@ -4114,7 +4109,6 @@ static void mlxsw_sp_port_lag_leave(struct mlxsw_sp_port *mlxsw_sp_port, lag = mlxsw_sp_lag_get(mlxsw_sp, lag_id); WARN_ON(lag->ref_count == 0);

- mlxsw_sp_lag_col_port_disable(mlxsw_sp_port, lag_id); mlxsw_sp_lag_col_port_remove(mlxsw_sp_port, lag_id);

/* Any VLANs configured on the port are no longer valid */ @@ -4159,21 +4153,56 @@ static int mlxsw_sp_lag_dist_port_remove(struct mlxsw_sp_port *mlxsw_sp_port, return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sldr), sldr_pl); }

-static int mlxsw_sp_port_lag_tx_en_set(struct mlxsw_sp_port *mlxsw_sp_port, - bool lag_tx_enabled) +static int +mlxsw_sp_port_lag_col_dist_enable(struct mlxsw_sp_port *mlxsw_sp_port) { - if (lag_tx_enabled) - return mlxsw_sp_lag_dist_port_add(mlxsw_sp_port, - mlxsw_sp_port->lag_id); - else - return mlxsw_sp_lag_dist_port_remove(mlxsw_sp_port, - mlxsw_sp_port->lag_id); + int err; + + err = mlxsw_sp_lag_col_port_enable(mlxsw_sp_port, + mlxsw_sp_port->lag_id); + if (err) + return err; + + err = mlxsw_sp_lag_dist_port_add(mlxsw_sp_port, mlxsw_sp_port->lag_id); + if (err) + goto err_dist_port_add; + + return 0; + +err_dist_port_add: + mlxsw_sp_lag_col_port_disable(mlxsw_sp_port, mlxsw_sp_port->lag_id); + return err; +} + +static int +mlxsw_sp_port_lag_col_dist_disable(struct mlxsw_sp_port *mlxsw_sp_port) +{ + int err; + + err = mlxsw_sp_lag_dist_port_remove(mlxsw_sp_port, + mlxsw_sp_port->lag_id); + if (err) + return err; + + err = mlxsw_sp_lag_col_port_disable(mlxsw_sp_port, + mlxsw_sp_port->lag_id); + if (err) + goto err_col_port_disable; + + return 0; + +err_col_port_disable: + mlxsw_sp_lag_dist_port_add(mlxsw_sp_port, mlxsw_sp_port->lag_id); + return err; }

static int mlxsw_sp_port_lag_changed(struct mlxsw_sp_port *mlxsw_sp_port, struct netdev_lag_lower_state_info *info) { - return mlxsw_sp_port_lag_tx_en_set(mlxsw_sp_port, info->tx_enabled); + if (info->tx_enabled) + return mlxsw_sp_port_lag_col_dist_enable(mlxsw_sp_port); + else + return mlxsw_sp_port_lag_col_dist_disable(mlxsw_sp_port); }

static int mlxsw_sp_port_stp_set(struct mlxsw_sp_port *mlxsw_sp_port, @@ -4309,8 +4338,7 @@ static int mlxsw_sp_netdevice_port_upper_event(struct net_device *lower_dev, err = mlxsw_sp_port_lag_join(mlxsw_sp_port, upper_dev); } else { - mlxsw_sp_port_lag_tx_en_set(mlxsw_sp_port, - false); + mlxsw_sp_port_lag_col_dist_disable(mlxsw_sp_port); mlxsw_sp_port_lag_leave(mlxsw_sp_port, upper_dev); }

From: Lucas A. M. Magalhães lucmaga@gmail.com

[ Upstream commit 5515e414f42bf2769caae15b634004d456658284 ]

Remove unused but set variables to clean up the code and avoid warning.

Signed-off-by: Lucas A. M. Magalhães lucmaga@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/vimc/vimc-sensor.c | 7 ------- 1 file changed, 7 deletions(-)

diff --git a/drivers/media/platform/vimc/vimc-sensor.c b/drivers/media/platform/vimc/vimc-sensor.c index 70cee5c0c89a5..29a16f8a4123c 100644 --- a/drivers/media/platform/vimc/vimc-sensor.c +++ b/drivers/media/platform/vimc/vimc-sensor.c @@ -200,13 +200,6 @@ static void *vimc_sen_process_frame(struct vimc_ent_device *ved, { struct vimc_sen_device *vsen = container_of(ved, struct vimc_sen_device, ved); - const struct vimc_pix_map *vpix; - unsigned int frame_size; - - /* Calculate the frame size */ - vpix = vimc_pix_map_by_code(vsen->mbus_format.code); - frame_size = vsen->mbus_format.width * vpix->bpp * - vsen->mbus_format.height;

tpg_fill_plane_buffer(&vsen->tpg, 0, 0, vsen->frame); return vsen->frame;

From: Sven Van Asbroeck thesven73@gmail.com

[ Upstream commit 7cf58b79b3072029af127ae865ffc6f00f34b1f8 ]

In remove(), ensure that the PME work cannot run after kfree() is called. Otherwise, this could result in a use-after-free.

This issue was detected with the help of Coccinelle.

Signed-off-by: Sven Van Asbroeck TheSven73@gmail.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Cc: Sinan Kaya okaya@kernel.org Cc: Frederick Lawler fred@fredlawl.com Cc: Mika Westerberg mika.westerberg@linux.intel.com Cc: Keith Busch keith.busch@intel.com Cc: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pcie/pme.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c index c2e6e3d1073f8..5500660bbb104 100644 --- a/drivers/pci/pcie/pme.c +++ b/drivers/pci/pcie/pme.c @@ -441,6 +441,7 @@ static void pcie_pme_remove(struct pcie_device *srv)

pcie_pme_disable_interrupt(srv->port, data); free_irq(srv->irq, srv); + cancel_work_sync(&data->work); kfree(data); }

From: Remi Pommarel repk@triplefau.lt

[ Upstream commit de10ac47597e7a3596b27631d0d5ce5f48d2c099 ]

meson_saradc's irq handler uses priv->regmap so make sure that it is allocated before the irq get enabled.

This also fixes crash when CONFIG_DEBUG_SHIRQ is enabled, as device managed resources are freed in the inverted order they had been allocated, priv->regmap was freed before the spurious fake irq that CONFIG_DEBUG_SHIRQ adds called the handler.

Fixes: 3af109131b7eb8 ("iio: adc: meson-saradc: switch from polling to interrupt mode") Reported-by: Elie Roudninski xademax@gmail.com Signed-off-by: Remi Pommarel repk@triplefau.lt Reviewed-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Tested-by: Elie ROUDNINSKI xademax@gmail.com Reviewed-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/adc/meson_saradc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c index 2515badf8b280..9b2121f249263 100644 --- a/drivers/iio/adc/meson_saradc.c +++ b/drivers/iio/adc/meson_saradc.c @@ -976,6 +976,11 @@ static int meson_sar_adc_probe(struct platform_device *pdev) if (IS_ERR(base)) return PTR_ERR(base);

+ priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, + priv->data->regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + irq = irq_of_parse_and_map(pdev->dev.of_node, 0); if (!irq) return -EINVAL; @@ -985,11 +990,6 @@ static int meson_sar_adc_probe(struct platform_device *pdev) if (ret) return ret;

- priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, - priv->data->regmap_config); - if (IS_ERR(priv->regmap)) - return PTR_ERR(priv->regmap); - priv->clkin = devm_clk_get(&pdev->dev, "clkin"); if (IS_ERR(priv->clkin)) { dev_err(&pdev->dev, "failed to get clkin\n");

From: Ian Rogers irogers@google.com

[ Upstream commit 4b0b2b096da9d296e0e5668cdfba8613bd6f5bc8 ]

Unconditionally defining _FORTIFY_SOURCE can break tools that don't work with it, such as memory sanitizers:

https://github.com/google/sanitizers/wiki/AddressSanitizer#faq

Fixes: 4b6ab94eabe4 ("perf subcmd: Create subcmd library") Signed-off-by: Ian Rogers irogers@google.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Andi Kleen ak@linux.intel.com Cc: Jiri Olsa jolsa@redhat.com Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Stephane Eranian eranian@google.com Link: http://lore.kernel.org/lkml/20190925195924.152834-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/lib/subcmd/Makefile | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/tools/lib/subcmd/Makefile b/tools/lib/subcmd/Makefile index ed61fb3a46c08..5b2cd5e58df09 100644 --- a/tools/lib/subcmd/Makefile +++ b/tools/lib/subcmd/Makefile @@ -20,7 +20,13 @@ MAKEFLAGS += --no-print-directory LIBFILE = $(OUTPUT)libsubcmd.a

CFLAGS := $(EXTRA_WARNINGS) $(EXTRA_CFLAGS) -CFLAGS += -ggdb3 -Wall -Wextra -std=gnu99 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -fPIC +CFLAGS += -ggdb3 -Wall -Wextra -std=gnu99 -fPIC + +ifeq ($(DEBUG),0) + ifeq ($(feature-fortify-source), 1) + CFLAGS += -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 + endif +endif

ifeq ($(CC_NO_CLANG), 0) CFLAGS += -O3

From: Steve MacLean Steve.MacLean@microsoft.com

[ Upstream commit ee212d6ea20887c0ef352be8563ca13dbf965906 ]

Whenever an mmap/mmap2 event occurs, the map tree must be updated to add a new entry. If a new map overlaps a previous map, the overlapped section of the previous map is effectively unmapped, but the non-overlapping sections are still valid.

maps__fixup_overlappings() is responsible for creating any new map entries from the previously overlapped map. It optionally creates a before and an after map.

When creating the after map the existing code failed to adjust the map.pgoff. This meant the new after map would incorrectly calculate the file offset for the ip. This results in incorrect symbol name resolution for any ip in the after region.

Make maps__fixup_overlappings() correctly populate map.pgoff.

Add an assert that new mapping matches old mapping at the beginning of the after map.

Committer-testing:

Validated correct parsing of libcoreclr.so symbols from .NET Core 3.0 preview9 (which didn't strip symbols).

Preparation:

~/dotnet3.0-preview9/dotnet new webapi -o perfSymbol cd perfSymbol ~/dotnet3.0-preview9/dotnet publish perf record ~/dotnet3.0-preview9/dotnet \ bin/Debug/netcoreapp3.0/publish/perfSymbol.dll ^C

Before:

perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\ grep libcoreclr.so | head -n 4 dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \ r-xp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.705249: 250000 cpu-clock: \ 7fe6159a1f99 [unknown] \ (.../3.0.0-preview9-19423-09/libcoreclr.so)

After:

perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\ grep libcoreclr.so | head -n 4 dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \ r-xp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so

All the [unknown] symbols were resolved.

Signed-off-by: Steve MacLean Steve.MacLean@Microsoft.com Tested-by: Brian Robbins brianrob@microsoft.com Acked-by: Jiri Olsa jolsa@kernel.org Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Andi Kleen ak@linux.intel.com Cc: Davidlohr Bueso dave@stgolabs.net Cc: Eric Saint-Etienne eric.saint.etienne@oracle.com Cc: John Keeping john@metanate.com Cc: John Salem josalem@microsoft.com Cc: Leo Yan leo.yan@linaro.org Cc: Mark Rutland mark.rutland@arm.com Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Song Liu songliubraving@fb.com Cc: Stephane Eranian eranian@google.com Cc: Tom McDonald thomas.mcdonald@microsoft.com Link: http://lore.kernel.org/lkml/BN8PR21MB136270949F22A6A02335C238F7800@BN8PR21MB... Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/map.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c index 4e7bd27501224..63db9872c8808 100644 --- a/tools/perf/util/map.c +++ b/tools/perf/util/map.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "symbol.h" +#include <assert.h> #include <errno.h> #include <inttypes.h> #include <limits.h> @@ -737,6 +738,8 @@ static int maps__fixup_overlappings(struct maps *maps, struct map *map, FILE *fp }

after->start = map->end; + after->pgoff += map->end - pos->start; + assert(pos->map_ip(pos, map->end) == after->map_ip(after, map->end)); __map_groups__insert(pos->groups, after); if (verbose >= 2 && !use_browser) map__fprintf(after, fp);

From: Connor Kuehl connor.kuehl@canonical.com

[ Upstream commit 955c1532a34305f2f780b47f0c40cc7c65500810 ]

If kzalloc() returns NULL, the error path doesn't stop the flow of control from entering rtw_hal_read_chip_version() which dereferences the null pointer. Fix this by adding a 'goto' to the error path to more gracefully handle the issue and avoid proceeding with initialization steps that we're no longer prepared to handle.

Also update the debug message to be more consistent with the other debug messages in this function.

Addresses-Coverity: ("Dereference after null check")

Signed-off-by: Connor Kuehl connor.kuehl@canonical.com Link: https://lore.kernel.org/r/20190927214415.899-1-connor.kuehl@canonical.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/rtl8188eu/os_dep/usb_intf.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c index 2fc7056cbff74..77c339a935258 100644 --- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c +++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c @@ -357,8 +357,10 @@ static struct adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj, }

padapter->HalData = kzalloc(sizeof(struct hal_data_8188e), GFP_KERNEL); - if (!padapter->HalData) - DBG_88E("cant not alloc memory for HAL DATA\n"); + if (!padapter->HalData) { + DBG_88E("Failed to allocate memory for HAL data\n"); + goto free_adapter; + }

/* step read_chip_version */ rtw_hal_read_chip_version(padapter);

From: Bart Van Assche bvanassche@acm.org

[ Upstream commit b66f31efbdad95ec274345721d99d1d835e6de01 ]

This patch fixes the lock inversion complaint:

============================================ WARNING: possible recursive locking detected 5.3.0-rc7-dbg+ #1 Not tainted -------------------------------------------- kworker/u16:6/171 is trying to acquire lock: 00000000035c6e6c (&id_priv->handler_mutex){+.+.}, at: rdma_destroy_id+0x78/0x4a0 [rdma_cm]

but task is already holding lock: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm]

other info that might help us debug this: Possible unsafe locking scenario:

CPU0 ---- lock(&id_priv->handler_mutex); lock(&id_priv->handler_mutex);

*** DEADLOCK ***

May be due to missing lock nesting notation

3 locks held by kworker/u16:6/171: #0: 00000000e2eaa773 ((wq_completion)iw_cm_wq){+.+.}, at: process_one_work+0x472/0xac0 #1: 000000001efd357b ((work_completion)(&work->work)#3){+.+.}, at: process_one_work+0x476/0xac0 #2: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm]

stack backtrace: CPU: 3 PID: 171 Comm: kworker/u16:6 Not tainted 5.3.0-rc7-dbg+ #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: dump_stack+0x8a/0xd6 __lock_acquire.cold+0xe1/0x24d lock_acquire+0x106/0x240 __mutex_lock+0x12e/0xcb0 mutex_lock_nested+0x1f/0x30 rdma_destroy_id+0x78/0x4a0 [rdma_cm] iw_conn_req_handler+0x5c9/0x680 [rdma_cm] cm_work_handler+0xe62/0x1100 [iw_cm] process_one_work+0x56d/0xac0 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30

This is not a bug as there are actually two lock classes here.

Link: https://lore.kernel.org/r/20190930231707.48259-3-bvanassche@acm.org Fixes: de910bd92137 ("RDMA/cma: Simplify locking needed for serialization of callbacks") Signed-off-by: Bart Van Assche bvanassche@acm.org Reviewed-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/core/cma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 7c5eca312aa88..f698c6a28c142 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -2212,9 +2212,10 @@ static int iw_conn_req_handler(struct iw_cm_id *cm_id, conn_id->cm_id.iw = NULL; cma_exch(conn_id, RDMA_CM_DESTROYING); mutex_unlock(&conn_id->handler_mutex); + mutex_unlock(&listen_id->handler_mutex); cma_deref_id(conn_id); rdma_destroy_id(&conn_id->id); - goto out; + return ret; }

mutex_unlock(&conn_id->handler_mutex);

From: ZhangXiaoxu zhangxiaoxu5@huawei.com

[ Upstream commit 33ea5aaa87cdae0f9af4d6b7ee4f650a1a36fd1d ]

When xfstests testing, there are some WARNING as below:

WARNING: CPU: 0 PID: 6235 at fs/nfs/inode.c:122 nfs_clear_inode+0x9c/0xd8 Modules linked in: CPU: 0 PID: 6235 Comm: umount.nfs Hardware name: linux,dummy-virt (DT) pstate: 60000005 (nZCv daif -PAN -UAO) pc : nfs_clear_inode+0x9c/0xd8 lr : nfs_evict_inode+0x60/0x78 sp : fffffc000f68fc00 x29: fffffc000f68fc00 x28: fffffe00c53155c0 x27: fffffe00c5315000 x26: fffffc0009a63748 x25: fffffc000f68fd18 x24: fffffc000bfaaf40 x23: fffffc000936d3c0 x22: fffffe00c4ff5e20 x21: fffffc000bfaaf40 x20: fffffe00c4ff5d10 x19: fffffc000c056000 x18: 000000000000003c x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000040 x14: 0000000000000228 x13: fffffc000c3a2000 x12: 0000000000000045 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : fffffc00084b027c x5 : fffffc0009a64000 x4 : fffffe00c0e77400 x3 : fffffc000c0563a8 x2 : fffffffffffffffb x1 : 000000000000764e x0 : 0000000000000001 Call trace: nfs_clear_inode+0x9c/0xd8 nfs_evict_inode+0x60/0x78 evict+0x108/0x380 dispose_list+0x70/0xa0 evict_inodes+0x194/0x210 generic_shutdown_super+0xb0/0x220 nfs_kill_super+0x40/0x88 deactivate_locked_super+0xb4/0x120 deactivate_super+0x144/0x160 cleanup_mnt+0x98/0x148 __cleanup_mnt+0x38/0x50 task_work_run+0x114/0x160 do_notify_resume+0x2f8/0x308 work_pending+0x8/0x14

The nrequest should be increased/decreased only if PG_INODE_REF flag was setted.

But in the nfs_inode_remove_request function, it maybe decrease when no PG_INODE_REF flag, this maybe lead nrequests count error.

Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: ZhangXiaoxu zhangxiaoxu5@huawei.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/write.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 3c1e46f4bce32..01b9d9341b541 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -783,7 +783,6 @@ static void nfs_inode_remove_request(struct nfs_page *req) struct nfs_inode *nfsi = NFS_I(inode); struct nfs_page *head;

- atomic_long_dec(&nfsi->nrequests); if (nfs_page_group_sync_on_bit(req, PG_REMOVE)) { head = req->wb_head;

@@ -796,8 +795,10 @@ static void nfs_inode_remove_request(struct nfs_page *req) spin_unlock(&mapping->private_lock); }

- if (test_and_clear_bit(PG_INODE_REF, &req->wb_flags)) + if (test_and_clear_bit(PG_INODE_REF, &req->wb_flags)) { nfs_release_request(req); + atomic_long_dec(&nfsi->nrequests); + } }

static void

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit 6264dab6efd6069f0387efb078a9960b5642377b ]

'exit' functions should be marked as __exit, not __init.

Fixes: fc60a8b675bd ("tty: serial: owl: Implement console driver") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Link: https://lore.kernel.org/r/20190910041129.6978-1-christophe.jaillet@wanadoo.f... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/owl-uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c index b9c8593653347..d774f6013d7b6 100644 --- a/drivers/tty/serial/owl-uart.c +++ b/drivers/tty/serial/owl-uart.c @@ -754,7 +754,7 @@ static int __init owl_uart_init(void) return ret; }

-static void __init owl_uart_exit(void) +static void __exit owl_uart_exit(void) { platform_driver_unregister(&owl_uart_platform_driver); uart_unregister_driver(&owl_uart_driver);

From: Thierry Reding treding@nvidia.com

[ Upstream commit fffa6af94894126994a7600c6f6f09b892e89fa9 ]

The gpiod_set_debounce() function takes the debounce time in microseconds. Adjust the switch/case values in the MAX77620 GPIO to use the correct unit.

Signed-off-by: Thierry Reding treding@nvidia.com Link: https://lore.kernel.org/r/20191002122825.3948322-1-thierry.reding@gmail.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-max77620.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-max77620.c b/drivers/gpio/gpio-max77620.c index 538bce4b5b427..ac6c1c0548b69 100644 --- a/drivers/gpio/gpio-max77620.c +++ b/drivers/gpio/gpio-max77620.c @@ -163,13 +163,13 @@ static int max77620_gpio_set_debounce(struct max77620_gpio *mgpio, case 0: val = MAX77620_CNFG_GPIO_DBNC_None; break; - case 1 ... 8: + case 1000 ... 8000: val = MAX77620_CNFG_GPIO_DBNC_8ms; break; - case 9 ... 16: + case 9000 ... 16000: val = MAX77620_CNFG_GPIO_DBNC_16ms; break; - case 17 ... 32: + case 17000 ... 32000: val = MAX77620_CNFG_GPIO_DBNC_32ms; break; default:

From: Adam Ford aford173@gmail.com

[ Upstream commit 37e3ab00e4734acc15d96b2926aab55c894f4d9c ]

When using mctrl_gpio_to_gpiod, it dereferences gpios into a single requested GPIO. This dereferencing can break if gpios is NULL, so this patch adds a NULL check before dereferencing it. If gpios is NULL, this function will also return NULL.

Signed-off-by: Adam Ford aford173@gmail.com Reviewed-by: Yegor Yefremov yegorslists@googlemail.com Link: https://lore.kernel.org/r/20191006163314.23191-1-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/serial_mctrl_gpio.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c index 42e42e3e7a6e6..388f710468490 100644 --- a/drivers/tty/serial/serial_mctrl_gpio.c +++ b/drivers/tty/serial/serial_mctrl_gpio.c @@ -69,6 +69,9 @@ EXPORT_SYMBOL_GPL(mctrl_gpio_set); struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, enum mctrl_gpio_idx gidx) { + if (gpios == NULL) + return NULL; + return gpios->gpio[gidx]; } EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod);

From: Dave Young dyoung@redhat.com

[ Upstream commit 2ecb7402cfc7f22764e7bbc80790e66eadb20560 ]

kexec reboot fails randomly in UEFI based KVM guest. The firmware just resets while calling efi_delete_dummy_variable(); Unfortunately I don't know how to debug the firmware, it is also possible a potential problem on real hardware as well although nobody reproduced it.

The intention of the efi_delete_dummy_variable is to trigger garbage collection when entering virtual mode. But SetVirtualAddressMap can only run once for each physical reboot, thus kexec_enter_virtual_mode() is not necessarily a good place to clean a dummy object.

Drop the efi_delete_dummy_variable so that kexec reboot can work.

Signed-off-by: Dave Young dyoung@redhat.com Signed-off-by: Ard Biesheuvel ard.biesheuvel@linaro.org Acked-by: Matthew Garrett mjg59@google.com Cc: Ben Dooks ben.dooks@codethink.co.uk Cc: Jarkko Sakkinen jarkko.sakkinen@linux.intel.com Cc: Jerry Snitselaar jsnitsel@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Lukas Wunner lukas@wunner.de Cc: Lyude Paul lyude@redhat.com Cc: Octavian Purdila octavian.purdila@intel.com Cc: Peter Jones pjones@redhat.com Cc: Peter Zijlstra peterz@infradead.org Cc: Scott Talbert swt@techie.net Cc: Thomas Gleixner tglx@linutronix.de Cc: linux-efi@vger.kernel.org Cc: linux-integrity@vger.kernel.org Link: https://lkml.kernel.org/r/20191002165904.8819-8-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/platform/efi/efi.c | 3 --- 1 file changed, 3 deletions(-)

diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 9061babfbc83d..335a62e74a2e9 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -893,9 +893,6 @@ static void __init kexec_enter_virtual_mode(void)

if (efi_enabled(EFI_OLD_MEMMAP) && (__supported_pte_mask & _PAGE_NX)) runtime_code_page_mkexec(); - - /* clean DUMMY object */ - efi_delete_dummy_variable(); #endif }

From: Boris Ostrovsky boris.ostrovsky@oracle.com

[ Upstream commit c6875f3aacf2a5a913205accddabf0bfb75cac76 ]

Currently execution of panic() continues until Xen's panic notifier (xen_panic_event()) is called at which point we make a hypercall that never returns.

This means that any notifier that is supposed to be called later as well as significant part of panic() code (such as pstore writes from kmsg_dump()) is never executed.

There is no reason for xen_panic_event() to be this last point in execution since panic()'s emergency_restart() will call into xen_emergency_restart() from where we can perform our hypercall.

Nevertheless, we will provide xen_legacy_crash boot option that will preserve original behavior during crash. This option could be used, for example, if running kernel dumper (which happens after panic notifiers) is undesirable.

Reported-by: James Dingwall james@dingwall.me.uk Signed-off-by: Boris Ostrovsky boris.ostrovsky@oracle.com Reviewed-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../admin-guide/kernel-parameters.txt | 4 +++ arch/x86/xen/enlighten.c | 28 +++++++++++++++++-- 2 files changed, 29 insertions(+), 3 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index b67a6cd08ca16..671f518b09eeb 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -4875,6 +4875,10 @@ the unplug protocol never -- do not unplug even if version check succeeds

+ xen_legacy_crash [X86,XEN] + Crash from Xen panic notifier, without executing late + panic() code such as dumping handler. + xen_nopvspin [X86,XEN] Disables the ticketlock slowpath using Xen PV optimizations. diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 515d5e4414c29..00fc683a20110 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -259,19 +259,41 @@ void xen_reboot(int reason) BUG(); }

+static int reboot_reason = SHUTDOWN_reboot; +static bool xen_legacy_crash; void xen_emergency_restart(void) { - xen_reboot(SHUTDOWN_reboot); + xen_reboot(reboot_reason); }

static int xen_panic_event(struct notifier_block *this, unsigned long event, void *ptr) { - if (!kexec_crash_loaded()) - xen_reboot(SHUTDOWN_crash); + if (!kexec_crash_loaded()) { + if (xen_legacy_crash) + xen_reboot(SHUTDOWN_crash); + + reboot_reason = SHUTDOWN_crash; + + /* + * If panic_timeout==0 then we are supposed to wait forever. + * However, to preserve original dom0 behavior we have to drop + * into hypervisor. (domU behavior is controlled by its + * config file) + */ + if (panic_timeout == 0) + panic_timeout = -1; + } return NOTIFY_DONE; }

+static int __init parse_xen_legacy_crash(char *arg) +{ + xen_legacy_crash = true; + return 0; +} +early_param("xen_legacy_crash", parse_xen_legacy_crash); + static struct notifier_block xen_panic_block = { .notifier_call = xen_panic_event, .priority = INT_MIN

From: Jia-Ju Bai baijiaju1990@gmail.com

[ Upstream commit 56e94ea132bb5c2c1d0b60a6aeb34dcb7d71a53d ]

In ocfs2_xa_prepare_entry(), there is an if statement on line 2136 to check whether loc->xl_entry is NULL:

if (loc->xl_entry)

When loc->xl_entry is NULL, it is used on line 2158:

ocfs2_xa_add_entry(loc, name_hash); loc->xl_entry->xe_name_hash = cpu_to_le32(name_hash); loc->xl_entry->xe_name_offset = cpu_to_le16(loc->xl_size);

and line 2164:

ocfs2_xa_add_namevalue(loc, xi); loc->xl_entry->xe_value_size = cpu_to_le64(xi->xi_value_len); loc->xl_entry->xe_name_len = xi->xi_name_len;

Thus, possible null-pointer dereferences may occur.

To fix these bugs, if loc-xl_entry is NULL, ocfs2_xa_prepare_entry() abnormally returns with -EINVAL.

These bugs are found by a static analysis tool STCheck written by us.

[akpm@linux-foundation.org: remove now-unused ocfs2_xa_add_entry()] Link: http://lkml.kernel.org/r/20190726101447.9153-1-baijiaju1990@gmail.com Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Reviewed-by: Joseph Qi joseph.qi@linux.alibaba.com Cc: Mark Fasheh mark@fasheh.com Cc: Joel Becker jlbec@evilplan.org Cc: Junxiao Bi junxiao.bi@oracle.com Cc: Changwei Ge gechangwei@live.cn Cc: Gang He ghe@suse.com Cc: Jun Piao piaojun@huawei.com Cc: Stephen Rothwell sfr@canb.auug.org.au Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ocfs2/xattr.c | 56 ++++++++++++++++++++---------------------------- 1 file changed, 23 insertions(+), 33 deletions(-)

diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 77740ef5a8e85..eca49da6d7e0d 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -1497,18 +1497,6 @@ static int ocfs2_xa_check_space(struct ocfs2_xa_loc *loc, return loc->xl_ops->xlo_check_space(loc, xi); }

-static void ocfs2_xa_add_entry(struct ocfs2_xa_loc *loc, u32 name_hash) -{ - loc->xl_ops->xlo_add_entry(loc, name_hash); - loc->xl_entry->xe_name_hash = cpu_to_le32(name_hash); - /* - * We can't leave the new entry's xe_name_offset at zero or - * add_namevalue() will go nuts. We set it to the size of our - * storage so that it can never be less than any other entry. - */ - loc->xl_entry->xe_name_offset = cpu_to_le16(loc->xl_size); -} - static void ocfs2_xa_add_namevalue(struct ocfs2_xa_loc *loc, struct ocfs2_xattr_info *xi) { @@ -2140,29 +2128,31 @@ static int ocfs2_xa_prepare_entry(struct ocfs2_xa_loc *loc, if (rc) goto out;

- if (loc->xl_entry) { - if (ocfs2_xa_can_reuse_entry(loc, xi)) { - orig_value_size = loc->xl_entry->xe_value_size; - rc = ocfs2_xa_reuse_entry(loc, xi, ctxt); - if (rc) - goto out; - goto alloc_value; - } + if (!loc->xl_entry) { + rc = -EINVAL; + goto out; + }

- if (!ocfs2_xattr_is_local(loc->xl_entry)) { - orig_clusters = ocfs2_xa_value_clusters(loc); - rc = ocfs2_xa_value_truncate(loc, 0, ctxt); - if (rc) { - mlog_errno(rc); - ocfs2_xa_cleanup_value_truncate(loc, - "overwriting", - orig_clusters); - goto out; - } + if (ocfs2_xa_can_reuse_entry(loc, xi)) { + orig_value_size = loc->xl_entry->xe_value_size; + rc = ocfs2_xa_reuse_entry(loc, xi, ctxt); + if (rc) + goto out; + goto alloc_value; + } + + if (!ocfs2_xattr_is_local(loc->xl_entry)) { + orig_clusters = ocfs2_xa_value_clusters(loc); + rc = ocfs2_xa_value_truncate(loc, 0, ctxt); + if (rc) { + mlog_errno(rc); + ocfs2_xa_cleanup_value_truncate(loc, + "overwriting", + orig_clusters); + goto out; } - ocfs2_xa_wipe_namevalue(loc); - } else - ocfs2_xa_add_entry(loc, name_hash); + } + ocfs2_xa_wipe_namevalue(loc);

/* * If we get here, we have a blank entry. Fill it. We grow our

From: Jia-Ju Bai baijiaju1990@gmail.com

[ Upstream commit 2abb7d3b12d007c30193f48bebed781009bebdd2 ]

In ocfs2_info_scan_inode_alloc(), there is an if statement on line 283 to check whether inode_alloc is NULL:

if (inode_alloc)

When inode_alloc is NULL, it is used on line 287:

ocfs2_inode_lock(inode_alloc, &bh, 0); ocfs2_inode_lock_full_nested(inode, ...) struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);

Thus, a possible null-pointer dereference may occur.

To fix this bug, inode_alloc is checked on line 286.

This bug is found by a static analysis tool STCheck written by us.

Link: http://lkml.kernel.org/r/20190726033717.32359-1-baijiaju1990@gmail.com Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Reviewed-by: Joseph Qi joseph.qi@linux.alibaba.com Cc: Mark Fasheh mark@fasheh.com Cc: Joel Becker jlbec@evilplan.org Cc: Junxiao Bi junxiao.bi@oracle.com Cc: Changwei Ge gechangwei@live.cn Cc: Gang He ghe@suse.com Cc: Jun Piao piaojun@huawei.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ocfs2/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c index ab30c005cc4bc..9fa98abecfc6b 100644 --- a/fs/ocfs2/ioctl.c +++ b/fs/ocfs2/ioctl.c @@ -290,7 +290,7 @@ static int ocfs2_info_scan_inode_alloc(struct ocfs2_super *osb, if (inode_alloc) inode_lock(inode_alloc);

- if (o2info_coherent(&fi->ifi_req)) { + if (inode_alloc && o2info_coherent(&fi->ifi_req)) { status = ocfs2_inode_lock(inode_alloc, &bh, 0); if (status < 0) { mlog_errno(status);

From: Tom Lendacky thomas.lendacky@amd.com

[ Upstream commit df4d29732fdad43a51284f826bec3e6ded177540 ]

It turns out that the NMI latency workaround from commit:

6d3edaae16c6 ("x86/perf/amd: Resolve NMI latency issues for active PMCs")

ends up being too conservative and results in the perf NMI handler claiming NMIs too easily on AMD hardware when the NMI watchdog is active.

This has an impact, for example, on the hpwdt (HPE watchdog timer) module. This module can produce an NMI that is used to reset the system. It registers an NMI handler for the NMI_UNKNOWN type and relies on the fact that nothing has claimed an NMI so that its handler will be invoked when the watchdog device produces an NMI. After the referenced commit, the hpwdt module is unable to process its generated NMI if the NMI watchdog is active, because the current NMI latency mitigation results in the NMI being claimed by the perf NMI handler.

Update the AMD perf NMI latency mitigation workaround to, instead, use a window of time. Whenever a PMC is handled in the perf NMI handler, set a timestamp which will act as a perf NMI window. Any NMIs arriving within that window will be claimed by perf. Anything outside that window will not be claimed by perf. The value for the NMI window is set to 100 msecs. This is a conservative value that easily covers any NMI latency in the hardware. While this still results in a window in which the hpwdt module will not receive its NMI, the window is now much, much smaller.

Signed-off-by: Tom Lendacky thomas.lendacky@amd.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Arnaldo Carvalho de Melo acme@kernel.org Cc: Borislav Petkov bp@alien8.de Cc: Jerry Hoemann jerry.hoemann@hpe.com Cc: Jiri Olsa jolsa@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Fixes: 6d3edaae16c6 ("x86/perf/amd: Resolve NMI latency issues for active PMCs") Link: https://lkml.kernel.org/r/Message-ID: Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/events/amd/core.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/arch/x86/events/amd/core.c b/arch/x86/events/amd/core.c index 27ade3cb6482c..defb536aebce2 100644 --- a/arch/x86/events/amd/core.c +++ b/arch/x86/events/amd/core.c @@ -4,12 +4,14 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/delay.h> +#include <linux/jiffies.h> #include <asm/apicdef.h> #include <asm/nmi.h>

#include "../perf_event.h"

-static DEFINE_PER_CPU(unsigned int, perf_nmi_counter); +static DEFINE_PER_CPU(unsigned long, perf_nmi_tstamp); +static unsigned long perf_nmi_window;

static __initconst const u64 amd_hw_cache_event_ids [PERF_COUNT_HW_CACHE_MAX] @@ -640,11 +642,12 @@ static void amd_pmu_disable_event(struct perf_event *event) * handler when multiple PMCs are active or PMC overflow while handling some * other source of an NMI. * - * Attempt to mitigate this by using the number of active PMCs to determine - * whether to return NMI_HANDLED if the perf NMI handler did not handle/reset - * any PMCs. The per-CPU perf_nmi_counter variable is set to a minimum of the - * number of active PMCs or 2. The value of 2 is used in case an NMI does not - * arrive at the LAPIC in time to be collapsed into an already pending NMI. + * Attempt to mitigate this by creating an NMI window in which un-handled NMIs + * received during this window will be claimed. This prevents extending the + * window past when it is possible that latent NMIs should be received. The + * per-CPU perf_nmi_tstamp will be set to the window end time whenever perf has + * handled a counter. When an un-handled NMI is received, it will be claimed + * only if arriving within that window. */ static int amd_pmu_handle_irq(struct pt_regs *regs) { @@ -662,21 +665,19 @@ static int amd_pmu_handle_irq(struct pt_regs *regs) handled = x86_pmu_handle_irq(regs);

/* - * If a counter was handled, record the number of possible remaining - * NMIs that can occur. + * If a counter was handled, record a timestamp such that un-handled + * NMIs will be claimed if arriving within that window. */ if (handled) { - this_cpu_write(perf_nmi_counter, - min_t(unsigned int, 2, active)); + this_cpu_write(perf_nmi_tstamp, + jiffies + perf_nmi_window);

return handled; }

- if (!this_cpu_read(perf_nmi_counter)) + if (time_after(jiffies, this_cpu_read(perf_nmi_tstamp))) return NMI_DONE;

- this_cpu_dec(perf_nmi_counter); - return NMI_HANDLED; }

@@ -908,6 +909,9 @@ static int __init amd_core_pmu_init(void) if (!boot_cpu_has(X86_FEATURE_PERFCTR_CORE)) return 0;

+ /* Avoid calulating the value each time in the NMI handler */ + perf_nmi_window = msecs_to_jiffies(100); + switch (boot_cpu_data.x86) { case 0x15: pr_cont("Fam15h ");

From: Thomas Bogendoerfer tbogendoerfer@suse.de

[ Upstream commit efcb529694c3b707dc0471b312944337ba16e4dd ]

Use ARRAY_SIZE to caluculate the top of the o32 stack.

Signed-off-by: Thomas Bogendoerfer tbogendoerfer@suse.de Signed-off-by: Paul Burton paul.burton@mips.com Cc: Ralf Baechle ralf@linux-mips.org Cc: James Hogan jhogan@kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/fw/sni/sniprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/fw/sni/sniprom.c b/arch/mips/fw/sni/sniprom.c index 6aa264b9856ac..7c6151d412bd7 100644 --- a/arch/mips/fw/sni/sniprom.c +++ b/arch/mips/fw/sni/sniprom.c @@ -42,7 +42,7 @@

/* O32 stack has to be 8-byte aligned. */ static u64 o32_stk[4096]; -#define O32_STK &o32_stk[sizeof(o32_stk)] +#define O32_STK (&o32_stk[ARRAY_SIZE(o32_stk)])

#define __PROM_O32(fun, arg) fun arg __asm__(#fun); \ __asm__(#fun " = call_o32")

From: Chuck Lever chuck.lever@oracle.com

[ Upstream commit 1047ec868332034d1fbcb2fae19fe6d4cb869ff2 ]

Our client can issue multiple SETCLIENTID operations to the same server in some circumstances. Ensure that calls to nfs4_proc_setclientid() after the first one do not overwrite the previously allocated cl_acceptor string.

unreferenced object 0xffff888461031800 (size 32): comm "mount.nfs", pid 2227, jiffies 4294822467 (age 1407.749s) hex dump (first 32 bytes): 6e 66 73 40 6b 6c 69 6d 74 2e 69 62 2e 31 30 31 nfs@klimt.ib.101 35 67 72 61 6e 67 65 72 2e 6e 65 74 00 00 00 00 5granger.net.... backtrace: [<00000000ab820188>] __kmalloc+0x128/0x176 [<00000000eeaf4ec8>] gss_stringify_acceptor+0xbd/0x1a7 [auth_rpcgss] [<00000000e85e3382>] nfs4_proc_setclientid+0x34e/0x46c [nfsv4] [<000000003d9cf1fa>] nfs40_discover_server_trunking+0x7a/0xed [nfsv4] [<00000000b81c3787>] nfs4_discover_server_trunking+0x81/0x244 [nfsv4] [<000000000801b55f>] nfs4_init_client+0x1b0/0x238 [nfsv4] [<00000000977daf7f>] nfs4_set_client+0xfe/0x14d [nfsv4] [<0000000053a68a2a>] nfs4_create_server+0x107/0x1db [nfsv4] [<0000000088262019>] nfs4_remote_mount+0x2c/0x59 [nfsv4] [<00000000e84a2fd0>] legacy_get_tree+0x2d/0x4c [<00000000797e947c>] vfs_get_tree+0x20/0xc7 [<00000000ecabaaa8>] fc_mount+0xe/0x36 [<00000000f15fafc2>] vfs_kern_mount+0x74/0x8d [<00000000a3ff4e26>] nfs_do_root_mount+0x8a/0xa3 [nfsv4] [<00000000d1c2b337>] nfs4_try_mount+0x58/0xad [nfsv4] [<000000004c9bddee>] nfs_fs_mount+0x820/0x869 [nfs]

Fixes: f11b2a1cfbf5 ("nfs4: copy acceptor name from context ... ") Signed-off-by: Chuck Lever chuck.lever@oracle.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/nfs4proc.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 6409ff4876cb5..af062e9f45803 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -5655,6 +5655,7 @@ int nfs4_proc_setclientid(struct nfs_client *clp, u32 program, } status = task->tk_status; if (setclientid.sc_cred) { + kfree(clp->cl_acceptor); clp->cl_acceptor = rpcauth_stringify_acceptor(setclientid.sc_cred); put_rpccred(setclientid.sc_cred); }

From: Petr Mladek pmladek@suse.com

[ Upstream commit d303de1fcf344ff7c15ed64c3f48a991c9958775 ]

A customer reported the following softlockup:

[899688.160002] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [test.sh:16464] [899688.160002] CPU: 0 PID: 16464 Comm: test.sh Not tainted 4.12.14-6.23-azure #1 SLE12-SP4 [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] Kernel panic - not syncing: softlockup: hung tasks [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] RSP: 0018:ffffa86784d4fde8 EFLAGS: 00000257 ORIG_RAX: ffffffffffffff12 [899688.160002] RAX: ffffffff970fea00 RBX: 0000000000000001 RCX: 0000000000000000 [899688.160002] RDX: ffffffff00000001 RSI: 0000000000000080 RDI: ffffffff970fea00 [899688.160002] RBP: ffffffffffffffff R08: ffffffffffffffff R09: 0000000000000000 [899688.160002] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b59014720d8 [899688.160002] R13: ffff8b59014720c0 R14: ffff8b5901471090 R15: ffff8b5901470000 [899688.160002] tracing_read_pipe+0x336/0x3c0 [899688.160002] __vfs_read+0x26/0x140 [899688.160002] vfs_read+0x87/0x130 [899688.160002] SyS_read+0x42/0x90 [899688.160002] do_syscall_64+0x74/0x160

It caught the process in the middle of trace_access_unlock(). There is no loop. So, it must be looping in the caller tracing_read_pipe() via the "waitagain" label.

Crashdump analyze uncovered that iter->seq was completely zeroed at this point, including iter->seq.seq.size. It means that print_trace_line() was never able to print anything and there was no forward progress.

The culprit seems to be in the code:

/* reset all but tr, trace, and overruns */ memset(&iter->seq, 0, sizeof(struct trace_iterator) - offsetof(struct trace_iterator, seq));

It was added by the commit 53d0aa773053ab182877 ("ftrace: add logic to record overruns"). It was v2.6.27-rc1. It was the time when iter->seq looked like:

struct trace_seq { unsigned char buffer[PAGE_SIZE]; unsigned int len; };

There was no "size" variable and zeroing was perfectly fine.

The solution is to reinitialize the structure after or without zeroing.

Link: http://lkml.kernel.org/r/20191011142134.11997-1-pmladek@suse.com

Signed-off-by: Petr Mladek pmladek@suse.com Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/trace.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index bbe5a857c082a..286bbad7681bf 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5764,6 +5764,7 @@ waitagain: sizeof(struct trace_iterator) - offsetof(struct trace_iterator, seq)); cpumask_clear(iter->started); + trace_seq_init(&iter->seq); iter->pos = -1;

trace_event_read_lock();

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit fd47a417e75e2506eb3672ae569b1c87e3774155 ]

The problem is that sizeof() is unsigned long so negative error codes are type promoted to high positive values and the condition becomes false.

Fixes: 1d427be4a39d ("USB: legousbtower: fix slab info leak at probe") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Acked-by: Johan Hovold johan@kernel.org Link: https://lore.kernel.org/r/20191011141115.GA4521@mwanda Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/misc/legousbtower.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 378a565ec989f..a1ed6be874715 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -881,7 +881,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device get_version_reply, sizeof(*get_version_reply), 1000); - if (result < sizeof(*get_version_reply)) { + if (result != sizeof(*get_version_reply)) { if (result >= 0) result = -EIO; dev_err(idev, "get version request failed: %d\n", result);

From: Mika Westerberg mika.westerberg@linux.intel.com

[ Upstream commit 943795219d3cb9f8ce6ce51cad3ffe1f61e95c6b ]

The register access should be using 32-bit reads/writes according to the datasheet. With the previous generation hardware 16-bit writes have been working but starting with ICL this is not the case anymore so fix producer/consumer register update to use correct width register address.

Signed-off-by: Mika Westerberg mika.westerberg@linux.intel.com Reviewed-by: Yehezkel Bernat YehezkelShB@gmail.com Tested-by: Mario Limonciello mario.limonciello@dell.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thunderbolt/nhi.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c index 16c607075ede4..af44e6e6b3bfe 100644 --- a/drivers/thunderbolt/nhi.c +++ b/drivers/thunderbolt/nhi.c @@ -134,9 +134,20 @@ static void __iomem *ring_options_base(struct tb_ring *ring) return io; }

-static void ring_iowrite16desc(struct tb_ring *ring, u32 value, u32 offset) +static void ring_iowrite_cons(struct tb_ring *ring, u16 cons) { - iowrite16(value, ring_desc_base(ring) + offset); + /* + * The other 16-bits in the register is read-only and writes to it + * are ignored by the hardware so we can save one ioread32() by + * filling the read-only bits with zeroes. + */ + iowrite32(cons, ring_desc_base(ring) + 8); +} + +static void ring_iowrite_prod(struct tb_ring *ring, u16 prod) +{ + /* See ring_iowrite_cons() above for explanation */ + iowrite32(prod << 16, ring_desc_base(ring) + 8); }

static void ring_iowrite32desc(struct tb_ring *ring, u32 value, u32 offset) @@ -188,7 +199,10 @@ static void ring_write_descriptors(struct tb_ring *ring) descriptor->sof = frame->sof; } ring->head = (ring->head + 1) % ring->size; - ring_iowrite16desc(ring, ring->head, ring->is_tx ? 10 : 8); + if (ring->is_tx) + ring_iowrite_prod(ring, ring->head); + else + ring_iowrite_cons(ring, ring->head); } }

@@ -461,7 +475,7 @@ void ring_stop(struct tb_ring *ring)

ring_iowrite32options(ring, 0, 0); ring_iowrite64desc(ring, 0, 0); - ring_iowrite16desc(ring, 0, ring->is_tx ? 10 : 8); + ring_iowrite32desc(ring, 0, 8); ring_iowrite32desc(ring, 0, 12); ring->head = 0; ring->tail = 0;

From: Miklos Szeredi mszeredi@redhat.com

commit b24e7598db62386a95a3c8b9c75630c5d56fe077 upstream.

If writeback cache is enabled, then writes might get reordered with chmod/chown/utimes. The problem with this is that performing the write in the fuse daemon might itself change some of these attributes. In such case the following sequence of operations will result in file ending up with the wrong mode, for example:

int fd = open ("suid", O_WRONLY|O_CREAT|O_EXCL); write (fd, "1", 1); fchown (fd, 0, 0); fchmod (fd, 04755); close (fd);

This patch fixes this by flushing pending writes before performing chown/chmod/utimes.

Reported-by: Giuseppe Scrivano gscrivan@redhat.com Tested-by: Giuseppe Scrivano gscrivan@redhat.com Fixes: 4d99ff8f12eb ("fuse: Turn writeback cache on") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/fuse/dir.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)

--- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -1650,6 +1650,19 @@ int fuse_do_setattr(struct dentry *dentr if (attr->ia_valid & ATTR_SIZE) is_truncate = true;

+ /* Flush dirty data/metadata before non-truncate SETATTR */ + if (is_wb && S_ISREG(inode->i_mode) && + attr->ia_valid & + (ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_MTIME_SET | + ATTR_TIMES_SET)) { + err = write_inode_now(inode, true); + if (err) + return err; + + fuse_set_nowrite(inode); + fuse_release_nowrite(inode); + } + if (is_truncate) { fuse_set_nowrite(inode); set_bit(FUSE_I_SIZE_UNSTABLE, &fi->state);

From: Takashi Sakamoto o-takashi@sakamocchi.jp

commit f2bbdbcb075f3977a53da3bdcb7cd460bc8ae5f2 upstream.

A helper function of ALSA bebob driver returns negative value in a function which has a prototype to return unsigned value.

This commit fixes it by changing the prototype.

Fixes: eb7b3a056cd8 ("ALSA: bebob: Add commands and connections/streams management") Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp Link: https://lore.kernel.org/r/20191026030620.12077-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/firewire/bebob/bebob_stream.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/sound/firewire/bebob/bebob_stream.c +++ b/sound/firewire/bebob/bebob_stream.c @@ -253,8 +253,7 @@ end: return err; }

-static unsigned int -map_data_channels(struct snd_bebob *bebob, struct amdtp_stream *s) +static int map_data_channels(struct snd_bebob *bebob, struct amdtp_stream *s) { unsigned int sec, sections, ch, channels; unsigned int pcm, midi, location;

From: Kailang Yang kailang@realtek.com

commit f0778871a13889b86a65d4ad34bef8340af9d082 upstream.

Support new codec ALC623.

Signed-off-by: Kailang Yang kailang@realtek.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/ed97b6a8bd9445ecb48bc763d9aaba7a@realtek.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/pci/hda/patch_realtek.c | 9 +++++++++ 1 file changed, 9 insertions(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -375,6 +375,9 @@ static void alc_fill_eapd_coef(struct hd case 0x10ec0672: alc_update_coef_idx(codec, 0xd, 0, 1<<14); /* EAPD Ctrl */ break; + case 0x10ec0623: + alc_update_coef_idx(codec, 0x19, 1<<13, 0); + break; case 0x10ec0668: alc_update_coef_idx(codec, 0x7, 3<<13, 0); break; @@ -2757,6 +2760,7 @@ enum { ALC269_TYPE_ALC225, ALC269_TYPE_ALC294, ALC269_TYPE_ALC300, + ALC269_TYPE_ALC623, ALC269_TYPE_ALC700, };

@@ -2792,6 +2796,7 @@ static int alc269_parse_auto_config(stru case ALC269_TYPE_ALC225: case ALC269_TYPE_ALC294: case ALC269_TYPE_ALC300: + case ALC269_TYPE_ALC623: case ALC269_TYPE_ALC700: ssids = alc269_ssids; break; @@ -7274,6 +7279,9 @@ static int patch_alc269(struct hda_codec spec->codec_variant = ALC269_TYPE_ALC300; spec->gen.mixer_nid = 0; /* no loopback on ALC300 */ break; + case 0x10ec0623: + spec->codec_variant = ALC269_TYPE_ALC623; + break; case 0x10ec0700: case 0x10ec0701: case 0x10ec0703: @@ -8354,6 +8362,7 @@ static const struct hda_device_id snd_hd HDA_CODEC_ENTRY(0x10ec0298, "ALC298", patch_alc269), HDA_CODEC_ENTRY(0x10ec0299, "ALC299", patch_alc269), HDA_CODEC_ENTRY(0x10ec0300, "ALC300", patch_alc269), + HDA_CODEC_ENTRY(0x10ec0623, "ALC623", patch_alc269), HDA_CODEC_REV_ENTRY(0x10ec0861, 0x100340, "ALC660", patch_alc861), HDA_CODEC_ENTRY(0x10ec0660, "ALC660-VD", patch_alc861vd), HDA_CODEC_ENTRY(0x10ec0861, "ALC861", patch_alc861),

From: Alan Stern stern@rowland.harvard.edu

commit 9a976949613132977098fc49510b46fa8678d864 upstream.

Commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows") attempted to solve a problem involving scatter-gather I/O and USB/IP by setting the virt_boundary_mask for mass-storage devices.

However, it now turns out that this interacts badly with commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary"), which was added later. A typical error message is:

ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 97 (slots)

There is no longer any reason to keep the virt_boundary_mask setting for usb-storage. It was needed in the first place only for handling devices with a block size smaller than the maxpacket size and where the host controller was not capable of fully general scatter-gather operation (that is, able to merge two SG segments into a single USB packet). But:

High-speed or slower connections never use a bulk maxpacket value larger than 512;

The SCSI layer does not handle block devices with a block size smaller than 512 bytes;

All the host controllers capable of SuperSpeed operation can handle fully general SG;

Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG.

Therefore all supported device/controller combinations should be okay with no need for any special virt_boundary_mask. So in order to fix the swiotlb problem, this patch reverts commit 747668dbc061.

Reported-and-tested-by: Piergiorgio Sartor piergiorgio.sartor@nexgo.de Link: https://marc.info/?l=linux-usb&m=157134199501202&w=2 Signed-off-by: Alan Stern stern@rowland.harvard.edu CC: Seth Bollinger Seth.Bollinger@digi.com CC: stable@vger.kernel.org Fixes: 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows") Acked-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910211145520.1673-100000@iolanthe... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/storage/scsiglue.c | 10 ---------- 1 file changed, 10 deletions(-)

--- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -81,7 +81,6 @@ static const char* host_info(struct Scsi static int slave_alloc (struct scsi_device *sdev) { struct us_data *us = host_to_us(sdev->host); - int maxp;

/* * Set the INQUIRY transfer length to 36. We don't use any of @@ -91,15 +90,6 @@ static int slave_alloc (struct scsi_devi sdev->inquiry_len = 36;

/* - * USB has unusual scatter-gather requirements: the length of each - * scatterlist element except the last must be divisible by the - * Bulk maxpacket value. Fortunately this value is always a - * power of 2. Inform the block layer about this requirement. - */ - maxp = usb_maxpacket(us->pusb_dev, us->recv_bulk_pipe, 0); - blk_queue_virt_boundary(sdev->request_queue, maxp - 1); - - /* * Some host controllers may have alignment requirements. * We'll play it safe by requiring 512-byte alignment always. */

From: Johan Hovold johan@kernel.org

commit 52403cfbc635d28195167618690595013776ebde upstream.

USB control-message timeouts are specified in milliseconds, not jiffies. Waiting 83 minutes for a transfer to complete is a bit excessive.

Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver") Cc: stable stable@vger.kernel.org # 2.6.13 Reported-by: syzbot+a4fbb3bb76cda0ea4e58@syzkaller.appspotmail.com Signed-off-by: Johan Hovold johan@kernel.org Link: https://lore.kernel.org/r/20191022153127.22295-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/misc/ldusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -583,7 +583,7 @@ static ssize_t ld_usb_write(struct file 1 << 8, 0, dev->interrupt_out_buffer, bytes_to_write, - USB_CTRL_SET_TIMEOUT * HZ); + USB_CTRL_SET_TIMEOUT); if (retval < 0) dev_err(&dev->intf->dev, "Couldn't submit HID_REQ_SET_REPORT %d\n",

From: Johan Hovold johan@kernel.org

commit 84968291d7924261c6a0624b9a72f952398e258b upstream.

Add missing endianness conversion when setting the line speed so that this driver might work also on big-endian machines.

Also use an unsigned format specifier in the corresponding debug message.

Signed-off-by: Johan Hovold johan@kernel.org Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20191029102354.2733-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/whiteheat.c | 9 ++++++--- drivers/usb/serial/whiteheat.h | 2 +- 2 files changed, 7 insertions(+), 4 deletions(-)

--- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -652,6 +652,7 @@ static void firm_setup_port(struct tty_s struct device *dev = &port->dev; struct whiteheat_port_settings port_settings; unsigned int cflag = tty->termios.c_cflag; + speed_t baud;

port_settings.port = port->port_number + 1;

@@ -712,11 +713,13 @@ static void firm_setup_port(struct tty_s dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff);

/* get the baud rate wanted */ - port_settings.baud = tty_get_baud_rate(tty); - dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud); + baud = tty_get_baud_rate(tty); + port_settings.baud = cpu_to_le32(baud); + dev_dbg(dev, "%s - baud rate = %u\n", __func__, baud);

/* fixme: should set validated settings */ - tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud); + tty_encode_baud_rate(tty, baud, baud); + /* handle any settings that aren't specified in the tty structure */ port_settings.lloop = 0;

--- a/drivers/usb/serial/whiteheat.h +++ b/drivers/usb/serial/whiteheat.h @@ -91,7 +91,7 @@ struct whiteheat_simple {

struct whiteheat_port_settings { __u8 port; /* port number (1 to N) */ - __u32 baud; /* any value 7 - 460800, firmware calculates + __le32 baud; /* any value 7 - 460800, firmware calculates best fit; arrives little endian */ __u8 bits; /* 5, 6, 7, or 8 */ __u8 stop; /* 1 or 2, default 1 (2 = 1.5 if bits = 5) */

From: Hans de Goede hdegoede@redhat.com

commit 09f3dbe474735df13dd8a66d3d1231048d9b373f upstream.

The Primebook C11B uses the SIPODEV SP1064 touchpad. There are 2 versions of this 2-in-1 and the touchpad in the older version does not supply descriptors, so it has to be added to the override list.

Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Benjamin Tissoires benjamin.tissoires@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)

--- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c @@ -323,6 +323,25 @@ static const struct dmi_system_id i2c_hi .driver_data = (void *)&sipodev_desc }, { + /* + * There are at least 2 Primebook C11B versions, the older + * version has a product-name of "Primebook C11B", and a + * bios version / release / firmware revision of: + * V2.1.2 / 05/03/2018 / 18.2 + * The new version has "PRIMEBOOK C11B" as product-name and a + * bios version / release / firmware revision of: + * CFALKSW05_BIOS_V1.1.2 / 11/19/2018 / 19.2 + * Only the older version needs this quirk, note the newer + * version will not match as it has a different product-name. + */ + .ident = "Trekstor Primebook C11B", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TREKSTOR"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Primebook C11B"), + }, + .driver_data = (void *)&sipodev_desc + }, + { .ident = "Direkt-Tek DTLAPY116-2", .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Direkt-Tek"),

From: Michał Mirosław mirq-linux@rere.qmqm.pl

commit b3a81c777dcb093020680490ab970d85e2f6f04f upstream.

On HID report descriptor parsing error the code displays bogus pointer instead of error offset (subtracts start=NULL from end). Make the message more useful by displaying correct error offset and include total buffer size for reference.

This was carried over from ancient times - "Fixed" commit just promoted the message from DEBUG to ERROR.

Cc: stable@vger.kernel.org Fixes: 8c3d52fc393b ("HID: make parser more verbose about parsing errors by default") Signed-off-by: Michał Mirosław mirq-linux@rere.qmqm.pl Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/hid/hid-core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -979,6 +979,7 @@ int hid_open_report(struct hid_device *d __u8 *start; __u8 *buf; __u8 *end; + __u8 *next; int ret; static int (*dispatch_type[])(struct hid_parser *parser, struct hid_item *item) = { @@ -1032,7 +1033,8 @@ int hid_open_report(struct hid_device *d device->collection_size = HID_DEFAULT_NUM_COLLECTIONS;

ret = -EINVAL; - while ((start = fetch_item(start, end, &item)) != NULL) { + while ((next = fetch_item(start, end, &item)) != NULL) { + start = next;

if (item.format != HID_ITEM_FORMAT_SHORT) { hid_err(device, "unexpected long global item\n"); @@ -1061,7 +1063,8 @@ int hid_open_report(struct hid_device *d } }

- hid_err(device, "item fetching failed at offset %d\n", (int)(end - start)); + hid_err(device, "item fetching failed at offset %u/%u\n", + size - (unsigned int)(end - start), size); err: vfree(parser); hid_close_report(device);

From: Yihui ZENG yzeng56@asu.edu

commit b8e51a6a9db94bc1fb18ae831b3dab106b5a4b5f upstream.

The problem is that we were putting the NUL terminator too far:

buf[sizeof(buf) - 1] = '\0';

If the user input isn't NUL terminated and they haven't initialized the whole buffer then it leads to an info leak. The NUL terminator should be:

buf[len - 1] = '\0';

Signed-off-by: Yihui Zeng yzeng56@asu.edu Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter dan.carpenter@oracle.com [heiko.carstens@de.ibm.com: keep semantics of how *lenp and *ppos are handled] Signed-off-by: Heiko Carstens heiko.carstens@de.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/s390/mm/cmm.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -307,16 +307,16 @@ static int cmm_timeout_handler(struct ct }

if (write) { - len = *lenp; - if (copy_from_user(buf, buffer, - len > sizeof(buf) ? sizeof(buf) : len)) + len = min(*lenp, sizeof(buf)); + if (copy_from_user(buf, buffer, len)) return -EFAULT; - buf[sizeof(buf) - 1] = '\0'; + buf[len - 1] = '\0'; cmm_skip_blanks(buf, &p); nr = simple_strtoul(p, &p, 0); cmm_skip_blanks(p, &p); seconds = simple_strtoul(p, &p, 0); cmm_set_timeout(nr, seconds); + *ppos += *lenp; } else { len = sprintf(buf, "%ld %ld\n", cmm_timeout_pages, cmm_timeout_seconds); @@ -324,9 +324,9 @@ static int cmm_timeout_handler(struct ct len = *lenp; if (copy_to_user(buffer, buf, len)) return -EFAULT; + *lenp = len; + *ppos += len; } - *lenp = len; - *ppos += len; return 0; }

From: Catalin Marinas catalin.marinas@arm.com

commit aa57157be69fb599bd4c38a4b75c5aad74a60ec0 upstream.

Shared and writable mappings (__S.1.) should be clean (!dirty) initially and made dirty on a subsequent write either through the hardware DBM (dirty bit management) mechanism or through a write page fault. A clean pte for the arm64 kernel is one that has PTE_RDONLY set and PTE_DIRTY clear.

The PAGE_SHARED{,_EXEC} attributes have PTE_WRITE set (PTE_DBM) and PTE_DIRTY clear. Prior to commit 73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()"), it was the responsibility of set_pte_at() to set the PTE_RDONLY bit and mark the pte clean if the software PTE_DIRTY bit was not set. However, the above commit removed the pte_sw_dirty() check and the subsequent setting of PTE_RDONLY in set_pte_at() while leaving the PAGE_SHARED{,_EXEC} definitions unchanged. The result is that shared+writable mappings are now dirty by default

Fix the above by explicitly setting PTE_RDONLY in PAGE_SHARED{,_EXEC}. In addition, remove the superfluous PTE_DIRTY bit from the kernel PROT_* attributes.

Fixes: 73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()") Cc: stable@vger.kernel.org # 4.14.x- Cc: Will Deacon will@kernel.org Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm64/include/asm/pgtable-prot.h | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)

--- a/arch/arm64/include/asm/pgtable-prot.h +++ b/arch/arm64/include/asm/pgtable-prot.h @@ -43,11 +43,11 @@ #define PROT_DEFAULT (_PROT_DEFAULT | PTE_MAYBE_NG) #define PROT_SECT_DEFAULT (_PROT_SECT_DEFAULT | PMD_MAYBE_NG)

-#define PROT_DEVICE_nGnRnE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRnE)) -#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRE)) -#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_NC)) -#define PROT_NORMAL_WT (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_WT)) -#define PROT_NORMAL (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL)) +#define PROT_DEVICE_nGnRnE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRnE)) +#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRE)) +#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_NC)) +#define PROT_NORMAL_WT (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_WT)) +#define PROT_NORMAL (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL))

#define PROT_SECT_DEVICE_nGnRE (PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_DEVICE_nGnRE)) #define PROT_SECT_NORMAL (PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL)) @@ -71,8 +71,9 @@ #define PAGE_S2_DEVICE __pgprot(_PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_UXN)

#define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN) -#define PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE) -#define PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE) +/* shared+writable pages are clean by default, hence PTE_RDONLY|PTE_WRITE */ +#define PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE) +#define PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_WRITE) #define PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN) #define PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN) #define PAGE_EXECONLY __pgprot(_PAGE_DEFAULT | PTE_RDONLY | PTE_NG | PTE_PXN)

From: Tony Lindgren tony@atomide.com

commit bacdcb6675e170bb2e8d3824da220e10274f42a7 upstream.

Yegor Yefremov yegorslists@googlemail.com reported that musb and ftdi uart can fail for the first open of the uart unless connected using a hub.

This is because the first dma call done by musb_ep_program() must wait if cppi41 is PM runtime suspended. Otherwise musb_ep_program() continues with other non-dma packets before the DMA transfer is started causing at least ftdi uarts to fail to receive data.

Let's fix the issue by waking up cppi41 with PM runtime calls added to cppi41_dma_prep_slave_sg() and return NULL if still idled. This way we have musb_ep_program() continue with PIO until cppi41 is awake.

Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Reported-by: Yegor Yefremov yegorslists@googlemail.com Signed-off-by: Tony Lindgren tony@atomide.com Cc: stable@vger.kernel.org # v4.9+ Link: https://lore.kernel.org/r/20191023153138.23442-1-tony@atomide.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/dma/cppi41.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)

--- a/drivers/dma/cppi41.c +++ b/drivers/dma/cppi41.c @@ -585,9 +585,22 @@ static struct dma_async_tx_descriptor *c enum dma_transfer_direction dir, unsigned long tx_flags, void *context) { struct cppi41_channel *c = to_cpp41_chan(chan); + struct dma_async_tx_descriptor *txd = NULL; + struct cppi41_dd *cdd = c->cdd; struct cppi41_desc *d; struct scatterlist *sg; unsigned int i; + int error; + + error = pm_runtime_get(cdd->ddev.dev); + if (error < 0) { + pm_runtime_put_noidle(cdd->ddev.dev); + + return NULL; + } + + if (cdd->is_suspended) + goto err_out_not_ready;

d = c->desc; for_each_sg(sgl, sg, sg_len, i) { @@ -610,7 +623,13 @@ static struct dma_async_tx_descriptor *c d++; }

- return &c->txd; + txd = &c->txd; + +err_out_not_ready: + pm_runtime_mark_last_busy(cdd->ddev.dev); + pm_runtime_put_autosuspend(cdd->ddev.dev); + + return txd; }

static void cppi41_compute_td_desc(struct cppi41_desc *d)

From: Eric Biggers ebiggers@google.com

commit b74555de21acd791f12c4a1aeaf653dd7ac21133 upstream.

syzbot reported:

BUG: memory leak unreferenced object 0xffff88811eb3de00 (size 224): comm "syz-executor559", pid 7315, jiffies 4294943019 (age 10.300s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 a0 38 24 81 88 ff ff 00 c0 f2 15 81 88 ff ff ..8$............ backtrace: [<000000008d1c66a1>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<000000008d1c66a1>] slab_post_alloc_hook mm/slab.h:439 [inline] [<000000008d1c66a1>] slab_alloc_node mm/slab.c:3269 [inline] [<000000008d1c66a1>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579 [<00000000447d9496>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198 [<000000000cdbf82f>] alloc_skb include/linux/skbuff.h:1058 [inline] [<000000000cdbf82f>] llc_alloc_frame+0x66/0x110 net/llc/llc_sap.c:54 [<000000002418b52e>] llc_conn_ac_send_sabme_cmd_p_set_x+0x2f/0x140 net/llc/llc_c_ac.c:777 [<000000001372ae17>] llc_exec_conn_trans_actions net/llc/llc_conn.c:475 [inline] [<000000001372ae17>] llc_conn_service net/llc/llc_conn.c:400 [inline] [<000000001372ae17>] llc_conn_state_process+0x1ac/0x640 net/llc/llc_conn.c:75 [<00000000f27e53c1>] llc_establish_connection+0x110/0x170 net/llc/llc_if.c:109 [<00000000291b2ca0>] llc_ui_connect+0x10e/0x370 net/llc/af_llc.c:477 [<000000000f9c740b>] __sys_connect+0x11d/0x170 net/socket.c:1840 [...]

The bug is that most callers of llc_conn_send_pdu() assume it consumes a reference to the skb, when actually due to commit b85ab56c3f81 ("llc: properly handle dev_queue_xmit() return value") it doesn't.

Revert most of that commit, and instead make the few places that need llc_conn_send_pdu() to *not* consume a reference call skb_get() before.

Fixes: b85ab56c3f81 ("llc: properly handle dev_queue_xmit() return value") Reported-by: syzbot+6b825a6494a04cc0e3f7@syzkaller.appspotmail.com Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Jakub Kicinski jakub.kicinski@netronome.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- include/net/llc_conn.h | 2 +- net/llc/llc_c_ac.c | 8 ++++++-- net/llc/llc_conn.c | 32 +++++++++----------------------- 3 files changed, 16 insertions(+), 26 deletions(-)

--- a/include/net/llc_conn.h +++ b/include/net/llc_conn.h @@ -104,7 +104,7 @@ void llc_sk_reset(struct sock *sk);

/* Access to a connection */ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb); -int llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb); +void llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb); void llc_conn_rtn_pdu(struct sock *sk, struct sk_buff *skb); void llc_conn_resend_i_pdu_as_cmd(struct sock *sk, u8 nr, u8 first_p_bit); void llc_conn_resend_i_pdu_as_rsp(struct sock *sk, u8 nr, u8 first_f_bit); --- a/net/llc/llc_c_ac.c +++ b/net/llc/llc_c_ac.c @@ -372,6 +372,7 @@ int llc_conn_ac_send_i_cmd_p_set_1(struc llc_pdu_init_as_i_cmd(skb, 1, llc->vS, llc->vR); rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac); if (likely(!rc)) { + skb_get(skb); llc_conn_send_pdu(sk, skb); llc_conn_ac_inc_vs_by_1(sk, skb); } @@ -389,7 +390,8 @@ static int llc_conn_ac_send_i_cmd_p_set_ llc_pdu_init_as_i_cmd(skb, 0, llc->vS, llc->vR); rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac); if (likely(!rc)) { - rc = llc_conn_send_pdu(sk, skb); + skb_get(skb); + llc_conn_send_pdu(sk, skb); llc_conn_ac_inc_vs_by_1(sk, skb); } return rc; @@ -406,6 +408,7 @@ int llc_conn_ac_send_i_xxx_x_set_0(struc llc_pdu_init_as_i_cmd(skb, 0, llc->vS, llc->vR); rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac); if (likely(!rc)) { + skb_get(skb); llc_conn_send_pdu(sk, skb); llc_conn_ac_inc_vs_by_1(sk, skb); } @@ -916,7 +919,8 @@ static int llc_conn_ac_send_i_rsp_f_set_ llc_pdu_init_as_i_cmd(skb, llc->ack_pf, llc->vS, llc->vR); rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac); if (likely(!rc)) { - rc = llc_conn_send_pdu(sk, skb); + skb_get(skb); + llc_conn_send_pdu(sk, skb); llc_conn_ac_inc_vs_by_1(sk, skb); } return rc; --- a/net/llc/llc_conn.c +++ b/net/llc/llc_conn.c @@ -30,7 +30,7 @@ #endif

static int llc_find_offset(int state, int ev_type); -static int llc_conn_send_pdus(struct sock *sk, struct sk_buff *skb); +static void llc_conn_send_pdus(struct sock *sk); static int llc_conn_service(struct sock *sk, struct sk_buff *skb); static int llc_exec_conn_trans_actions(struct sock *sk, struct llc_conn_state_trans *trans, @@ -193,11 +193,11 @@ out_skb_put: return rc; }

-int llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb) +void llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb) { /* queue PDU to send to MAC layer */ skb_queue_tail(&sk->sk_write_queue, skb); - return llc_conn_send_pdus(sk, skb); + llc_conn_send_pdus(sk); }

/** @@ -255,7 +255,7 @@ void llc_conn_resend_i_pdu_as_cmd(struct if (howmany_resend > 0) llc->vS = (llc->vS + 1) % LLC_2_SEQ_NBR_MODULO; /* any PDUs to re-send are queued up; start sending to MAC */ - llc_conn_send_pdus(sk, NULL); + llc_conn_send_pdus(sk); out:; }

@@ -296,7 +296,7 @@ void llc_conn_resend_i_pdu_as_rsp(struct if (howmany_resend > 0) llc->vS = (llc->vS + 1) % LLC_2_SEQ_NBR_MODULO; /* any PDUs to re-send are queued up; start sending to MAC */ - llc_conn_send_pdus(sk, NULL); + llc_conn_send_pdus(sk); out:; }

@@ -340,16 +340,12 @@ out: /** * llc_conn_send_pdus - Sends queued PDUs * @sk: active connection - * @hold_skb: the skb held by caller, or NULL if does not care * - * Sends queued pdus to MAC layer for transmission. When @hold_skb is - * NULL, always return 0. Otherwise, return 0 if @hold_skb is sent - * successfully, or 1 for failure. + * Sends queued pdus to MAC layer for transmission. */ -static int llc_conn_send_pdus(struct sock *sk, struct sk_buff *hold_skb) +static void llc_conn_send_pdus(struct sock *sk) { struct sk_buff *skb; - int ret = 0;

while ((skb = skb_dequeue(&sk->sk_write_queue)) != NULL) { struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb); @@ -361,20 +357,10 @@ static int llc_conn_send_pdus(struct soc skb_queue_tail(&llc_sk(sk)->pdu_unack_q, skb); if (!skb2) break; - dev_queue_xmit(skb2); - } else { - bool is_target = skb == hold_skb; - int rc; - - if (is_target) - skb_get(skb); - rc = dev_queue_xmit(skb); - if (is_target) - ret = rc; + skb = skb2; } + dev_queue_xmit(skb); } - - return ret; }

/**

From: Johan Hovold johan@kernel.org

commit 6af3aa57a0984e061f61308fe181a9a12359fecc upstream.

The driver would fail to deregister and its class device and free related resources on late probe errors.

Reported-by: syzbot+cb035c75c03dbe34b796@syzkaller.appspotmail.com Fixes: 32ecc75ded72 ("NFC: pn533: change order operations in dev registation") Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Jakub Kicinski jakub.kicinski@netronome.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/nfc/pn533/usb.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/nfc/pn533/usb.c +++ b/drivers/nfc/pn533/usb.c @@ -559,18 +559,25 @@ static int pn533_usb_probe(struct usb_in

rc = pn533_finalize_setup(priv); if (rc) - goto error; + goto err_deregister;

usb_set_intfdata(interface, phy);

return 0;

+err_deregister: + pn533_unregister_device(phy->priv); error: + usb_kill_urb(phy->in_urb); + usb_kill_urb(phy->out_urb); + usb_kill_urb(phy->ack_urb); + usb_free_urb(phy->in_urb); usb_free_urb(phy->out_urb); usb_free_urb(phy->ack_urb); usb_put_dev(phy->udev); kfree(in_buf); + kfree(phy->ack_buffer);

return rc; }

From: Valentin Vidic vvidic@valentin-vidic.from.hr

commit 77b6d09f4ae66d42cd63b121af67780ae3d1a5e9 upstream.

Make sure res does not contain random value if the call to sr_read_cmd fails for some reason.

Reported-by: syzbot+f1842130bbcfb335bac1@syzkaller.appspotmail.com Signed-off-by: Valentin Vidic vvidic@valentin-vidic.from.hr Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/usb/sr9800.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/usb/sr9800.c +++ b/drivers/net/usb/sr9800.c @@ -336,7 +336,7 @@ static void sr_set_multicast(struct net_ static int sr_mdio_read(struct net_device *net, int phy_id, int loc) { struct usbnet *dev = netdev_priv(net); - __le16 res; + __le16 res = 0;

mutex_lock(&dev->phy_mutex); sr_set_sw_mii(dev);

From: Xin Long lucien.xin@gmail.com

commit 644fbdeacf1d3edd366e44b8ba214de9d1dd66a9 upstream.

Now sctp uses inet_dgram_connect as its proto_ops .connect, and the flags param can't be passed into its proto .connect where this flags is really needed.

sctp works around it by getting flags from socket file in __sctp_connect. It works for connecting from userspace, as inherently the user sock has socket file and it passes f_flags as the flags param into the proto_ops .connect.

However, the sock created by sock_create_kern doesn't have a socket file, and it passes the flags (like O_NONBLOCK) by using the flags param in kernel_connect, which calls proto_ops .connect later.

So to fix it, this patch defines a new proto_ops .connect for sctp, sctp_inet_connect, which calls __sctp_connect() directly with this flags param. After this, the sctp's proto .connect can be removed.

Note that sctp_inet_connect doesn't need to do some checks that are not needed for sctp, which makes thing better than with inet_dgram_connect.

Suggested-by: Marcelo Ricardo Leitner marcelo.leitner@gmail.com Signed-off-by: Xin Long lucien.xin@gmail.com Acked-by: Neil Horman nhorman@tuxdriver.com Acked-by: Marcelo Ricardo Leitner marcelo.leitner@gmail.com Reviewed-by: Michal Kubecek mkubecek@suse.cz Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- include/net/sctp/sctp.h | 2 + net/sctp/ipv6.c | 2 - net/sctp/protocol.c | 2 - net/sctp/socket.c | 56 ++++++++++++++++++++++++++++++++---------------- 4 files changed, 42 insertions(+), 20 deletions(-)

--- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -103,6 +103,8 @@ void sctp_addr_wq_mgmt(struct net *, str /* * sctp/socket.c */ +int sctp_inet_connect(struct socket *sock, struct sockaddr *uaddr, + int addr_len, int flags); int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb); int sctp_inet_listen(struct socket *sock, int backlog); void sctp_write_space(struct sock *sk); --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -974,7 +974,7 @@ static const struct proto_ops inet6_seqp .owner = THIS_MODULE, .release = inet6_release, .bind = inet6_bind, - .connect = inet_dgram_connect, + .connect = sctp_inet_connect, .socketpair = sock_no_socketpair, .accept = inet_accept, .getname = sctp_getname, --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -1019,7 +1019,7 @@ static const struct proto_ops inet_seqpa .owner = THIS_MODULE, .release = inet_release, /* Needs to be wrapped... */ .bind = inet_bind, - .connect = inet_dgram_connect, + .connect = sctp_inet_connect, .socketpair = sock_no_socketpair, .accept = inet_accept, .getname = inet_getname, /* Semantics are different. */ --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1076,7 +1076,7 @@ out: */ static int __sctp_connect(struct sock *sk, struct sockaddr *kaddrs, - int addrs_size, + int addrs_size, int flags, sctp_assoc_t *assoc_id) { struct net *net = sock_net(sk); @@ -1094,7 +1094,6 @@ static int __sctp_connect(struct sock *s union sctp_addr *sa_addr = NULL; void *addr_buf; unsigned short port; - unsigned int f_flags = 0;

sp = sctp_sk(sk); ep = sp->ep; @@ -1244,13 +1243,7 @@ static int __sctp_connect(struct sock *s sp->pf->to_sk_daddr(sa_addr, sk); sk->sk_err = 0;

- /* in-kernel sockets don't generally have a file allocated to them - * if all they do is call sock_create_kern(). - */ - if (sk->sk_socket->file) - f_flags = sk->sk_socket->file->f_flags; - - timeo = sock_sndtimeo(sk, f_flags & O_NONBLOCK); + timeo = sock_sndtimeo(sk, flags & O_NONBLOCK);

if (assoc_id) *assoc_id = asoc->assoc_id; @@ -1345,7 +1338,7 @@ static int __sctp_setsockopt_connectx(st { struct sockaddr *kaddrs; gfp_t gfp = GFP_KERNEL; - int err = 0; + int err = 0, flags = 0;

pr_debug("%s: sk:%p addrs:%p addrs_size:%d\n", __func__, sk, addrs, addrs_size); @@ -1365,11 +1358,18 @@ static int __sctp_setsockopt_connectx(st return -ENOMEM;

if (__copy_from_user(kaddrs, addrs, addrs_size)) { - err = -EFAULT; - } else { - err = __sctp_connect(sk, kaddrs, addrs_size, assoc_id); + kfree(kaddrs); + return -EFAULT; }

+ /* in-kernel sockets don't generally have a file allocated to them + * if all they do is call sock_create_kern(). + */ + if (sk->sk_socket->file) + flags = sk->sk_socket->file->f_flags; + + err = __sctp_connect(sk, kaddrs, addrs_size, flags, assoc_id); + kfree(kaddrs);

return err; @@ -4166,16 +4166,26 @@ out_nounlock: * len: the size of the address. */ static int sctp_connect(struct sock *sk, struct sockaddr *addr, - int addr_len) + int addr_len, int flags) { - int err = 0; + struct inet_sock *inet = inet_sk(sk); struct sctp_af *af; + int err = 0;

lock_sock(sk);

pr_debug("%s: sk:%p, sockaddr:%p, addr_len:%d\n", __func__, sk, addr, addr_len);

+ /* We may need to bind the socket. */ + if (!inet->inet_num) { + if (sk->sk_prot->get_port(sk, 0)) { + release_sock(sk); + return -EAGAIN; + } + inet->inet_sport = htons(inet->inet_num); + } + /* Validate addr_len before calling common connect/connectx routine. */ af = sctp_get_af_specific(addr->sa_family); if (!af || addr_len < af->sockaddr_len) { @@ -4184,13 +4194,25 @@ static int sctp_connect(struct sock *sk, /* Pass correct addr len to common routine (so it knows there * is only one address being passed. */ - err = __sctp_connect(sk, addr, af->sockaddr_len, NULL); + err = __sctp_connect(sk, addr, af->sockaddr_len, flags, NULL); }

release_sock(sk); return err; }

+int sctp_inet_connect(struct socket *sock, struct sockaddr *uaddr, + int addr_len, int flags) +{ + if (addr_len < sizeof(uaddr->sa_family)) + return -EINVAL; + + if (uaddr->sa_family == AF_UNSPEC) + return -EOPNOTSUPP; + + return sctp_connect(sock->sk, uaddr, addr_len, flags); +} + /* FIXME: Write comments. */ static int sctp_disconnect(struct sock *sk, int flags) { @@ -8298,7 +8320,6 @@ struct proto sctp_prot = { .name = "SCTP", .owner = THIS_MODULE, .close = sctp_close, - .connect = sctp_connect, .disconnect = sctp_disconnect, .accept = sctp_accept, .ioctl = sctp_ioctl, @@ -8337,7 +8358,6 @@ struct proto sctpv6_prot = { .name = "SCTPv6", .owner = THIS_MODULE, .close = sctp_close, - .connect = sctp_connect, .disconnect = sctp_disconnect, .accept = sctp_accept, .ioctl = sctp_ioctl,

From: Vratislav Bendel vbendel@redhat.com

commit 19957a181608d25c8f4136652d0ea00b3738972d upstream.

Due to an inverted logic mistake in xfs_buftarg_isolate() the xfs_buffers with zero b_lru_ref will take another trip around LRU, while isolating buffers with non-zero b_lru_ref.

Additionally those isolated buffers end up right back on the LRU once they are released, because b_lru_ref remains elevated.

Fix that circuitous route by leaving them on the LRU as originally intended.

Signed-off-by: Vratislav Bendel vbendel@redhat.com Reviewed-by: Brian Foster bfoster@redhat.com Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Alex Lyakas alex@zadara.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/xfs/xfs_buf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -1702,7 +1702,7 @@ xfs_buftarg_isolate( * zero. If the value is already zero, we need to reclaim the * buffer, otherwise it gets another trip through the LRU. */ - if (!atomic_add_unless(&bp->b_lru_ref, -1, 0)) { + if (atomic_add_unless(&bp->b_lru_ref, -1, 0)) { spin_unlock(&bp->b_lock); return LRU_ROTATE; }

From: Takashi Iwai tiwai@suse.de

[ Upstream commit a39331867335d4a94b6165e306265c9e24aca073 ]

When a card is disconnected while in use, the system waits until all opened files are closed then releases the card. This is done via put_device() of the card device in each device release code.

The recently reported mutex deadlock bug happens in this code path; snd_timer_close() for the timer device deals with the global register_mutex and it calls put_device() there. When this timer device is the last one, the card gets freed and it eventually calls snd_timer_free(), which has again the protection with the global register_mutex -- boom.

Basically put_device() call itself is race-free, so a relative simple workaround is to move this put_device() call out of the mutex. For achieving that, in this patch, snd_timer_close_locked() got a new argument to store the card device pointer in return, and each caller invokes put_device() with the returned object after the mutex unlock.

Reported-and-tested-by: Kirill A. Shutemov kirill.shutemov@linux.intel.com Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/core/timer.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/sound/core/timer.c b/sound/core/timer.c index b50f7601cc2b0..161ab19cb7220 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -240,7 +240,8 @@ static int snd_timer_check_master(struct snd_timer_instance *master) return 0; }

-static int snd_timer_close_locked(struct snd_timer_instance *timeri); +static int snd_timer_close_locked(struct snd_timer_instance *timeri, + struct device **card_devp_to_put);

/* * open a timer instance @@ -252,6 +253,7 @@ int snd_timer_open(struct snd_timer_instance **ti, { struct snd_timer *timer; struct snd_timer_instance *timeri = NULL; + struct device *card_dev_to_put = NULL; int err;

mutex_lock(&register_mutex); @@ -275,7 +277,7 @@ int snd_timer_open(struct snd_timer_instance **ti, list_add_tail(&timeri->open_list, &snd_timer_slave_list); err = snd_timer_check_slave(timeri); if (err < 0) { - snd_timer_close_locked(timeri); + snd_timer_close_locked(timeri, &card_dev_to_put); timeri = NULL; } goto unlock; @@ -327,7 +329,7 @@ int snd_timer_open(struct snd_timer_instance **ti, timeri = NULL;

if (timer->card) - put_device(&timer->card->card_dev); + card_dev_to_put = &timer->card->card_dev; module_put(timer->module); goto unlock; } @@ -337,12 +339,15 @@ int snd_timer_open(struct snd_timer_instance **ti, timer->num_instances++; err = snd_timer_check_master(timeri); if (err < 0) { - snd_timer_close_locked(timeri); + snd_timer_close_locked(timeri, &card_dev_to_put); timeri = NULL; }

unlock: mutex_unlock(&register_mutex); + /* put_device() is called after unlock for avoiding deadlock */ + if (card_dev_to_put) + put_device(card_dev_to_put); *ti = timeri; return err; } @@ -352,7 +357,8 @@ EXPORT_SYMBOL(snd_timer_open); * close a timer instance * call this with register_mutex down. */ -static int snd_timer_close_locked(struct snd_timer_instance *timeri) +static int snd_timer_close_locked(struct snd_timer_instance *timeri, + struct device **card_devp_to_put) { struct snd_timer *timer = NULL; struct snd_timer_instance *slave, *tmp; @@ -404,7 +410,7 @@ static int snd_timer_close_locked(struct snd_timer_instance *timeri) timer->hw.close(timer); /* release a card refcount for safe disconnection */ if (timer->card) - put_device(&timer->card->card_dev); + *card_devp_to_put = &timer->card->card_dev; module_put(timer->module); }

@@ -416,14 +422,18 @@ static int snd_timer_close_locked(struct snd_timer_instance *timeri) */ int snd_timer_close(struct snd_timer_instance *timeri) { + struct device *card_dev_to_put = NULL; int err;

if (snd_BUG_ON(!timeri)) return -ENXIO;

mutex_lock(&register_mutex); - err = snd_timer_close_locked(timeri); + err = snd_timer_close_locked(timeri, &card_dev_to_put); mutex_unlock(&register_mutex); + /* put_device() is called after unlock for avoiding deadlock */ + if (card_dev_to_put) + put_device(card_dev_to_put); return err; } EXPORT_SYMBOL(snd_timer_close);