1. With the patch "x86/vector/msi: Switch to global reservation mode" (4900be8360), the recent v4.15 and newer kernels always hang for 1-vCPU Hyper-V VM with SR-IOV. This is because when we reach hv_compose_msi_msg() by request_irq() -> request_threaded_irq() -> __setup_irq()->irq_startup() -> __irq_startup() -> irq_domain_activate_irq() -> ... -> msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is disabled in __setup_irq().

Fix this by polling the channel.

2. If the host is ejecting the VF device before we reach hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg() forever, because at this time the host doesn't respond to the CREATE_INTERRUPT request. This issue also happens to old kernels like v4.14, v4.13, etc.

Fix this by polling the channel for the PCI_EJECT message and hpdev->state, and by checking the PCI vendor ID.

Note: actually the above issues also happen to a SMP VM, if "hbus->hdev->channel->target_cpu == smp_processor_id()" is true.

Signed-off-by: Dexuan Cui decui@microsoft.com Tested-by: Adrian Suhov v-adsuho@microsoft.com Tested-by: Chris Valean v-chvale@microsoft.com Cc: stable@vger.kernel.org Cc: Stephen Hemminger sthemmin@microsoft.com Cc: K. Y. Srinivasan kys@microsoft.com Cc: Vitaly Kuznetsov vkuznets@redhat.com Cc: Jack Morgenstein jackm@mellanox.com --- drivers/pci/host/pci-hyperv.c | 58 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 57 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c index d3aa6736a9bb..114624dfbd97 100644 --- a/drivers/pci/host/pci-hyperv.c +++ b/drivers/pci/host/pci-hyperv.c @@ -521,6 +521,8 @@ struct hv_pci_compl { s32 completion_status; };

+static void hv_pci_onchannelcallback(void *context); + /** * hv_pci_generic_compl() - Invoked for a completion packet * @context: Set up by the sender of the packet. @@ -665,6 +667,31 @@ static void _hv_pcifront_read_config(struct hv_pci_dev *hpdev, int where, } }

+static u16 hv_pcifront_get_vendor_id(struct hv_pci_dev *hpdev) +{ + u16 ret; + unsigned long flags; + void __iomem *addr = hpdev->hbus->cfg_addr + CFG_PAGE_OFFSET + + PCI_VENDOR_ID; + + spin_lock_irqsave(&hpdev->hbus->config_lock, flags); + + /* Choose the function to be read. (See comment above) */ + writel(hpdev->desc.win_slot.slot, hpdev->hbus->cfg_addr); + /* Make sure the function was chosen before we start reading. */ + mb(); + /* Read from that function's config space. */ + ret = readw(addr); + /* + * mb() is not required here, because the spin_unlock_irqrestore() + * is a barrier. + */ + + spin_unlock_irqrestore(&hpdev->hbus->config_lock, flags); + + return ret; +} + /** * _hv_pcifront_write_config() - Internal PCI config write * @hpdev: The PCI driver's representation of the device @@ -1107,8 +1134,37 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) * Since this function is called with IRQ locks held, can't * do normal wait for completion; instead poll. */ - while (!try_wait_for_completion(&comp.comp_pkt.host_event)) + while (!try_wait_for_completion(&comp.comp_pkt.host_event)) { + /* 0xFFFF means an invalid PCI VENDOR ID. */ + if (hv_pcifront_get_vendor_id(hpdev) == 0xFFFF) { + dev_err_once(&hbus->hdev->device, + "the device has gone\n"); + goto free_int_desc; + } + + /* + * When the higher level interrupt code calls us with + * interrupt disabled, we must poll the channel by calling + * the channel callback directly when channel->target_cpu is + * the current CPU. When the higher level interrupt code + * calls us with interrupt enabled, let's add the + * local_bh_disable()/enable() to avoid race. + */ + local_bh_disable(); + + if (hbus->hdev->channel->target_cpu == smp_processor_id()) + hv_pci_onchannelcallback(hbus); + + local_bh_enable(); + + if (hpdev->state == hv_pcichild_ejecting) { + dev_err_once(&hbus->hdev->device, + "the device is being ejected\n"); + goto free_int_desc; + } + udelay(100); + }

if (comp.comp_pkt.completion_status < 0) { dev_err(&hbus->hdev->device,