Qcom PCIe IP version v2.7.0 and its derivatives don't contain the PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT register. Instead, they have the new PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register. So fix the incorrect register usage which is modifying a different register.

Also in this IP version, this register change doesn't depend on MSI being enabled. So remove that check also.

Cc: stable@vger.kernel.org # 5.6+ Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller") Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org --- drivers/pci/controller/dwc/pcie-qcom.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index a232b04af048..89d748cc4b8a 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1279,11 +1279,9 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) val &= ~REQ_NOT_ENTR_L1; writel(val, pcie->parf + PCIE20_PARF_PM_CTRL);

- if (IS_ENABLED(CONFIG_PCI_MSI)) { - val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT); - val |= BIT(31); - writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT); - } + val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2); + val |= BIT(31); + writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2);

return 0; err_disable_clocks: