The Qualcomm LLCC/EDAC drivers were using a fixed register stride for accessing the (Control and Status Registers) CSRs of each LLCC bank. This stride only works for some SoCs like SDM845 for which driver support was initially added.
But the later SoCs use different register stride that vary between the banks with holes in-between. So it is not possible to use a single register stride for accessing the CSRs of each bank. By doing so could result in a crash.
For fixing this issue, let's obtain the base address of each LLCC bank from devicetree and get rid of the fixed stride. This also means, we no longer need to rely on reg-names property and get the base addresses using index.
First index is LLCC bank 0 and last index is LLCC broadcast. If the SoC supports more than one bank, then those needs to be defined in devicetree for index from 1..N-1.
Cc: stable@vger.kernel.org # 4.20 Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver") Fixes: 27450653f1db ("drivers: edac: Add EDAC driver support for QCOM SoCs") Reported-by: Parikshit Pareek quic_ppareek@quicinc.com Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org --- drivers/edac/qcom_edac.c | 14 +++--- drivers/soc/qcom/llcc-qcom.c | 72 +++++++++++++++++------------- include/linux/soc/qcom/llcc-qcom.h | 6 +-- 3 files changed, 48 insertions(+), 44 deletions(-)
diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c index 97a27e42dd61..5be93577fc03 100644 --- a/drivers/edac/qcom_edac.c +++ b/drivers/edac/qcom_edac.c @@ -213,7 +213,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type)
for (i = 0; i < reg_data.reg_cnt; i++) { synd_reg = reg_data.synd_reg + (i * 4); - ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg, + ret = regmap_read(drv->regmaps[bank], synd_reg, &synd_val); if (ret) goto clear; @@ -222,8 +222,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) reg_data.name, i, synd_val); }
- ret = regmap_read(drv->regmap, - drv->offsets[bank] + reg_data.count_status_reg, + ret = regmap_read(drv->regmaps[bank], reg_data.count_status_reg, &err_cnt); if (ret) goto clear; @@ -233,8 +232,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) edac_printk(KERN_CRIT, EDAC_LLCC, "%s: Error count: 0x%4x\n", reg_data.name, err_cnt);
- ret = regmap_read(drv->regmap, - drv->offsets[bank] + reg_data.ways_status_reg, + ret = regmap_read(drv->regmaps[bank], reg_data.ways_status_reg, &err_ways); if (ret) goto clear; @@ -296,8 +294,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl)
/* Iterate over the banks and look for Tag RAM or Data RAM errors */ for (i = 0; i < drv->num_banks; i++) { - ret = regmap_read(drv->regmap, - drv->offsets[i] + DRP_INTERRUPT_STATUS, + ret = regmap_read(drv->regmaps[i], DRP_INTERRUPT_STATUS, &drp_error);
if (!ret && (drp_error & SB_ECC_ERROR)) { @@ -312,8 +309,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl) if (!ret) irq_rc = IRQ_HANDLED;
- ret = regmap_read(drv->regmap, - drv->offsets[i] + TRP_INTERRUPT_0_STATUS, + ret = regmap_read(drv->regmaps[i], TRP_INTERRUPT_0_STATUS, &trp_error);
if (!ret && (trp_error & SB_ECC_ERROR)) { diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c index 23ce2f78c4ed..a29f22dad7fa 100644 --- a/drivers/soc/qcom/llcc-qcom.c +++ b/drivers/soc/qcom/llcc-qcom.c @@ -62,8 +62,6 @@ #define LLCC_TRP_WRSC_CACHEABLE_EN 0x21f2c #define LLCC_TRP_ALGO_CFG8 0x21f30
-#define BANK_OFFSET_STRIDE 0x80000 - #define LLCC_VERSION_2_0_0_0 0x02000000 #define LLCC_VERSION_2_1_0_0 0x02010000 #define LLCC_VERSION_4_1_0_0 0x04010000 @@ -898,8 +896,8 @@ static int qcom_llcc_remove(struct platform_device *pdev) return 0; }
-static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev, - const char *name) +static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev, u8 index, + const char *name) { void __iomem *base; struct regmap_config llcc_regmap_config = { @@ -909,7 +907,7 @@ static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev, .fast_io = true, };
- base = devm_platform_ioremap_resource_byname(pdev, name); + base = devm_platform_ioremap_resource(pdev, index); if (IS_ERR(base)) return ERR_CAST(base);
@@ -927,6 +925,7 @@ static int qcom_llcc_probe(struct platform_device *pdev) const struct llcc_slice_config *llcc_cfg; u32 sz; u32 version; + struct regmap *regmap;
drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL); if (!drv_data) { @@ -934,21 +933,51 @@ static int qcom_llcc_probe(struct platform_device *pdev) goto err; }
- drv_data->regmap = qcom_llcc_init_mmio(pdev, "llcc_base"); - if (IS_ERR(drv_data->regmap)) { - ret = PTR_ERR(drv_data->regmap); + /* Initialize the first LLCC bank regmap */ + regmap = qcom_llcc_init_mmio(pdev, i, "llcc0_base"); + if (IS_ERR(regmap)) { + ret = PTR_ERR(regmap); goto err; }
- drv_data->bcast_regmap = - qcom_llcc_init_mmio(pdev, "llcc_broadcast_base"); + cfg = of_device_get_match_data(&pdev->dev); + + ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks); + if (ret) + goto err; + + num_banks &= LLCC_LB_CNT_MASK; + num_banks >>= LLCC_LB_CNT_SHIFT; + drv_data->num_banks = num_banks; + + drv_data->regmaps = devm_kcalloc(dev, num_banks, sizeof(*drv_data->regmaps), GFP_KERNEL); + if (!drv_data->regmaps) { + ret = -ENOMEM; + goto err; + } + + drv_data->regmaps[0] = regmap; + + /* Initialize rest of LLCC bank regmaps */ + for (i = 1; i < num_banks; i++) { + char *base = kasprintf(GFP_KERNEL, "llcc%d_base", i); + + drv_data->regmaps[i] = qcom_llcc_init_mmio(pdev, i, base); + if (IS_ERR(drv_data->regmaps[i])) { + ret = PTR_ERR(drv_data->regmaps[i]); + kfree(base); + goto err; + } + + kfree(base); + } + + drv_data->bcast_regmap = qcom_llcc_init_mmio(pdev, i, "llcc_broadcast_base"); if (IS_ERR(drv_data->bcast_regmap)) { ret = PTR_ERR(drv_data->bcast_regmap); goto err; }
- cfg = of_device_get_match_data(&pdev->dev); - /* Extract version of the IP */ ret = regmap_read(drv_data->bcast_regmap, cfg->reg_offset[LLCC_COMMON_HW_INFO], &version); @@ -957,15 +986,6 @@ static int qcom_llcc_probe(struct platform_device *pdev)
drv_data->version = version;
- ret = regmap_read(drv_data->regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], - &num_banks); - if (ret) - goto err; - - num_banks &= LLCC_LB_CNT_MASK; - num_banks >>= LLCC_LB_CNT_SHIFT; - drv_data->num_banks = num_banks; - llcc_cfg = cfg->sct_data; sz = cfg->size;
@@ -973,16 +993,6 @@ static int qcom_llcc_probe(struct platform_device *pdev) if (llcc_cfg[i].slice_id > drv_data->max_slices) drv_data->max_slices = llcc_cfg[i].slice_id;
- drv_data->offsets = devm_kcalloc(dev, num_banks, sizeof(u32), - GFP_KERNEL); - if (!drv_data->offsets) { - ret = -ENOMEM; - goto err; - } - - for (i = 0; i < num_banks; i++) - drv_data->offsets[i] = i * BANK_OFFSET_STRIDE; - drv_data->bitmap = devm_bitmap_zalloc(dev, drv_data->max_slices, GFP_KERNEL); if (!drv_data->bitmap) { diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h index ad1fd718169d..423220e66026 100644 --- a/include/linux/soc/qcom/llcc-qcom.h +++ b/include/linux/soc/qcom/llcc-qcom.h @@ -120,7 +120,7 @@ struct llcc_edac_reg_offset {
/** * struct llcc_drv_data - Data associated with the llcc driver - * @regmap: regmap associated with the llcc device + * @regmaps: regmaps associated with the llcc device * @bcast_regmap: regmap associated with llcc broadcast offset * @cfg: pointer to the data structure for slice configuration * @edac_reg_offset: Offset of the LLCC EDAC registers @@ -129,12 +129,11 @@ struct llcc_edac_reg_offset { * @max_slices: max slices as read from device tree * @num_banks: Number of llcc banks * @bitmap: Bit map to track the active slice ids - * @offsets: Pointer to the bank offsets array * @ecc_irq: interrupt for llcc cache error detection and reporting * @version: Indicates the LLCC version */ struct llcc_drv_data { - struct regmap *regmap; + struct regmap **regmaps; struct regmap *bcast_regmap; const struct llcc_slice_config *cfg; const struct llcc_edac_reg_offset *edac_reg_offset; @@ -143,7 +142,6 @@ struct llcc_drv_data { u32 max_slices; u32 num_banks; unsigned long *bitmap; - u32 *offsets; int ecc_irq; u32 version; };
On 12/12/2022 13:33, Manivannan Sadhasivam wrote:
The Qualcomm LLCC/EDAC drivers were using a fixed register stride for accessing the (Control and Status Registers) CSRs of each LLCC bank. This stride only works for some SoCs like SDM845 for which driver support was initially added.
But the later SoCs use different register stride that vary between the banks with holes in-between. So it is not possible to use a single register stride for accessing the CSRs of each bank. By doing so could result in a crash.
For fixing this issue, let's obtain the base address of each LLCC bank from devicetree and get rid of the fixed stride. This also means, we no longer need to rely on reg-names property and get the base addresses using index.
First index is LLCC bank 0 and last index is LLCC broadcast. If the SoC supports more than one bank, then those needs to be defined in devicetree for index from 1..N-1.
Cc: stable@vger.kernel.org # 4.20 Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver") Fixes: 27450653f1db ("drivers: edac: Add EDAC driver support for QCOM SoCs")
Your previous patches in the series had incorrect CC-stable/Fixes tags, thus I have doubts also here.
Can you confirm, that this patch alone (alone! Without DTS patches) when backported to v4.20, still works perfectly fine for sdm845?
Reported-by: Parikshit Pareek quic_ppareek@quicinc.com Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
drivers/edac/qcom_edac.c | 14 +++--- drivers/soc/qcom/llcc-qcom.c | 72 +++++++++++++++++------------- include/linux/soc/qcom/llcc-qcom.h | 6 +-- 3 files changed, 48 insertions(+), 44 deletions(-)
diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c index 97a27e42dd61..5be93577fc03 100644 --- a/drivers/edac/qcom_edac.c +++ b/drivers/edac/qcom_edac.c @@ -213,7 +213,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) for (i = 0; i < reg_data.reg_cnt; i++) { synd_reg = reg_data.synd_reg + (i * 4);
ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg,
ret = regmap_read(drv->regmaps[bank], synd_reg, &synd_val);@@ -222,8 +222,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) reg_data.name, i, synd_val); }
- ret = regmap_read(drv->regmap,
drv->offsets[bank] + reg_data.count_status_reg,
- ret = regmap_read(drv->regmaps[bank], reg_data.count_status_reg, &err_cnt); if (ret) goto clear;
@@ -233,8 +232,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) edac_printk(KERN_CRIT, EDAC_LLCC, "%s: Error count: 0x%4x\n", reg_data.name, err_cnt);
- ret = regmap_read(drv->regmap,
drv->offsets[bank] + reg_data.ways_status_reg,
- ret = regmap_read(drv->regmaps[bank], reg_data.ways_status_reg, &err_ways); if (ret) goto clear;
@@ -296,8 +294,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl) /* Iterate over the banks and look for Tag RAM or Data RAM errors */ for (i = 0; i < drv->num_banks; i++) {
ret = regmap_read(drv->regmap,drv->offsets[i] + DRP_INTERRUPT_STATUS,
ret = regmap_read(drv->regmaps[i], DRP_INTERRUPT_STATUS, &drp_error);if (!ret && (drp_error & SB_ECC_ERROR)) { @@ -312,8 +309,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl) if (!ret) irq_rc = IRQ_HANDLED;
ret = regmap_read(drv->regmap,drv->offsets[i] + TRP_INTERRUPT_0_STATUS,
ret = regmap_read(drv->regmaps[i], TRP_INTERRUPT_0_STATUS, &trp_error);if (!ret && (trp_error & SB_ECC_ERROR)) { diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c index 23ce2f78c4ed..a29f22dad7fa 100644 --- a/drivers/soc/qcom/llcc-qcom.c +++ b/drivers/soc/qcom/llcc-qcom.c @@ -62,8 +62,6 @@ #define LLCC_TRP_WRSC_CACHEABLE_EN 0x21f2c #define LLCC_TRP_ALGO_CFG8 0x21f30 -#define BANK_OFFSET_STRIDE 0x80000
#define LLCC_VERSION_2_0_0_0 0x02000000 #define LLCC_VERSION_2_1_0_0 0x02010000 #define LLCC_VERSION_4_1_0_0 0x04010000 @@ -898,8 +896,8 @@ static int qcom_llcc_remove(struct platform_device *pdev) return 0; } -static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev,
const char *name)+static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev, u8 index,
const char *name){ void __iomem *base; struct regmap_config llcc_regmap_config = { @@ -909,7 +907,7 @@ static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev, .fast_io = true, };
- base = devm_platform_ioremap_resource_byname(pdev, name);
- base = devm_platform_ioremap_resource(pdev, index); if (IS_ERR(base)) return ERR_CAST(base);
@@ -927,6 +925,7 @@ static int qcom_llcc_probe(struct platform_device *pdev) const struct llcc_slice_config *llcc_cfg; u32 sz; u32 version;
- struct regmap *regmap;
drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL); if (!drv_data) { @@ -934,21 +933,51 @@ static int qcom_llcc_probe(struct platform_device *pdev) goto err; }
- drv_data->regmap = qcom_llcc_init_mmio(pdev, "llcc_base");
- if (IS_ERR(drv_data->regmap)) {
ret = PTR_ERR(drv_data->regmap);
- /* Initialize the first LLCC bank regmap */
- regmap = qcom_llcc_init_mmio(pdev, i, "llcc0_base");
What is the value of "i" here? Looks like not initialized in my next.
- if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
- drv_data->bcast_regmap =
qcom_llcc_init_mmio(pdev, "llcc_broadcast_base");
- cfg = of_device_get_match_data(&pdev->dev);
- ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
- if (ret)
goto err;- num_banks &= LLCC_LB_CNT_MASK;
- num_banks >>= LLCC_LB_CNT_SHIFT;
- drv_data->num_banks = num_banks;
- drv_data->regmaps = devm_kcalloc(dev, num_banks, sizeof(*drv_data->regmaps), GFP_KERNEL);
- if (!drv_data->regmaps) {
ret = -ENOMEM;goto err;- }
- drv_data->regmaps[0] = regmap;
- /* Initialize rest of LLCC bank regmaps */
- for (i = 1; i < num_banks; i++) {
char *base = kasprintf(GFP_KERNEL, "llcc%d_base", i);drv_data->regmaps[i] = qcom_llcc_init_mmio(pdev, i, base);if (IS_ERR(drv_data->regmaps[i])) {ret = PTR_ERR(drv_data->regmaps[i]);kfree(base);goto err;
This looks like the ABI break so: 1. Existing users are broken, 2. It cannot be backported.
}kfree(base);- }
Best regards, Krzysztof
On Tue, Dec 13, 2022 at 05:37:37PM +0100, Krzysztof Kozlowski wrote:
On 12/12/2022 13:33, Manivannan Sadhasivam wrote:
The Qualcomm LLCC/EDAC drivers were using a fixed register stride for accessing the (Control and Status Registers) CSRs of each LLCC bank. This stride only works for some SoCs like SDM845 for which driver support was initially added.
But the later SoCs use different register stride that vary between the banks with holes in-between. So it is not possible to use a single register stride for accessing the CSRs of each bank. By doing so could result in a crash.
For fixing this issue, let's obtain the base address of each LLCC bank from devicetree and get rid of the fixed stride. This also means, we no longer need to rely on reg-names property and get the base addresses using index.
First index is LLCC bank 0 and last index is LLCC broadcast. If the SoC supports more than one bank, then those needs to be defined in devicetree for index from 1..N-1.
Cc: stable@vger.kernel.org # 4.20 Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver") Fixes: 27450653f1db ("drivers: edac: Add EDAC driver support for QCOM SoCs")
Your previous patches in the series had incorrect CC-stable/Fixes tags, thus I have doubts also here.
Sorry I do not agree with you. I wanted to backport binding, dts and driver patches to possible LTS kernels together and that's why I tagged stable list.
Either all goes to stable or none. If your question is more towards what if one goes before the other, then in that case I may need to specify the dependency of commits but that will look messy. I took the gamble because, the driver is already broken in stable kernels.
Can you confirm, that this patch alone (alone! Without DTS patches) when backported to v4.20, still works perfectly fine for sdm845?
It won't and that's why I also tagged dts patches for backporting.
Reported-by: Parikshit Pareek quic_ppareek@quicinc.com Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
drivers/edac/qcom_edac.c | 14 +++--- drivers/soc/qcom/llcc-qcom.c | 72 +++++++++++++++++------------- include/linux/soc/qcom/llcc-qcom.h | 6 +-- 3 files changed, 48 insertions(+), 44 deletions(-)
diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c index 97a27e42dd61..5be93577fc03 100644 --- a/drivers/edac/qcom_edac.c +++ b/drivers/edac/qcom_edac.c @@ -213,7 +213,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) for (i = 0; i < reg_data.reg_cnt; i++) { synd_reg = reg_data.synd_reg + (i * 4);
ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg,
ret = regmap_read(drv->regmaps[bank], synd_reg, &synd_val);@@ -222,8 +222,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) reg_data.name, i, synd_val); }
- ret = regmap_read(drv->regmap,
drv->offsets[bank] + reg_data.count_status_reg,
- ret = regmap_read(drv->regmaps[bank], reg_data.count_status_reg, &err_cnt); if (ret) goto clear;
@@ -233,8 +232,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) edac_printk(KERN_CRIT, EDAC_LLCC, "%s: Error count: 0x%4x\n", reg_data.name, err_cnt);
- ret = regmap_read(drv->regmap,
drv->offsets[bank] + reg_data.ways_status_reg,
- ret = regmap_read(drv->regmaps[bank], reg_data.ways_status_reg, &err_ways); if (ret) goto clear;
@@ -296,8 +294,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl) /* Iterate over the banks and look for Tag RAM or Data RAM errors */ for (i = 0; i < drv->num_banks; i++) {
ret = regmap_read(drv->regmap,drv->offsets[i] + DRP_INTERRUPT_STATUS,
ret = regmap_read(drv->regmaps[i], DRP_INTERRUPT_STATUS, &drp_error);if (!ret && (drp_error & SB_ECC_ERROR)) { @@ -312,8 +309,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl) if (!ret) irq_rc = IRQ_HANDLED;
ret = regmap_read(drv->regmap,drv->offsets[i] + TRP_INTERRUPT_0_STATUS,
ret = regmap_read(drv->regmaps[i], TRP_INTERRUPT_0_STATUS, &trp_error);if (!ret && (trp_error & SB_ECC_ERROR)) { diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c index 23ce2f78c4ed..a29f22dad7fa 100644 --- a/drivers/soc/qcom/llcc-qcom.c +++ b/drivers/soc/qcom/llcc-qcom.c @@ -62,8 +62,6 @@ #define LLCC_TRP_WRSC_CACHEABLE_EN 0x21f2c #define LLCC_TRP_ALGO_CFG8 0x21f30 -#define BANK_OFFSET_STRIDE 0x80000
#define LLCC_VERSION_2_0_0_0 0x02000000 #define LLCC_VERSION_2_1_0_0 0x02010000 #define LLCC_VERSION_4_1_0_0 0x04010000 @@ -898,8 +896,8 @@ static int qcom_llcc_remove(struct platform_device *pdev) return 0; } -static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev,
const char *name)+static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev, u8 index,
const char *name){ void __iomem *base; struct regmap_config llcc_regmap_config = { @@ -909,7 +907,7 @@ static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev, .fast_io = true, };
- base = devm_platform_ioremap_resource_byname(pdev, name);
- base = devm_platform_ioremap_resource(pdev, index); if (IS_ERR(base)) return ERR_CAST(base);
@@ -927,6 +925,7 @@ static int qcom_llcc_probe(struct platform_device *pdev) const struct llcc_slice_config *llcc_cfg; u32 sz; u32 version;
- struct regmap *regmap;
drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL); if (!drv_data) { @@ -934,21 +933,51 @@ static int qcom_llcc_probe(struct platform_device *pdev) goto err; }
- drv_data->regmap = qcom_llcc_init_mmio(pdev, "llcc_base");
- if (IS_ERR(drv_data->regmap)) {
ret = PTR_ERR(drv_data->regmap);
- /* Initialize the first LLCC bank regmap */
- regmap = qcom_llcc_init_mmio(pdev, i, "llcc0_base");
What is the value of "i" here? Looks like not initialized in my next.
Yes, this was a mistake and been reported by kernel bot. It will be fixed in next version.
- if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
- drv_data->bcast_regmap =
qcom_llcc_init_mmio(pdev, "llcc_broadcast_base");
- cfg = of_device_get_match_data(&pdev->dev);
- ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
- if (ret)
goto err;- num_banks &= LLCC_LB_CNT_MASK;
- num_banks >>= LLCC_LB_CNT_SHIFT;
- drv_data->num_banks = num_banks;
- drv_data->regmaps = devm_kcalloc(dev, num_banks, sizeof(*drv_data->regmaps), GFP_KERNEL);
- if (!drv_data->regmaps) {
ret = -ENOMEM;goto err;- }
- drv_data->regmaps[0] = regmap;
- /* Initialize rest of LLCC bank regmaps */
- for (i = 1; i < num_banks; i++) {
char *base = kasprintf(GFP_KERNEL, "llcc%d_base", i);drv_data->regmaps[i] = qcom_llcc_init_mmio(pdev, i, base);if (IS_ERR(drv_data->regmaps[i])) {ret = PTR_ERR(drv_data->regmaps[i]);kfree(base);goto err;This looks like the ABI break so:
- Existing users are broken,
I fixed the dts for all affected SoCs, then who are all other existing users?
- It cannot be backported.
This is a bug fix and clearly needs to be backported along with the dts changes. For this purpose only I have tagged both dts and driver patches for backporting. Am I missing anything here?
Thanks, Mani
}kfree(base);- }
Best regards, Krzysztof
On 13/12/2022 18:44, Manivannan Sadhasivam wrote:
On Tue, Dec 13, 2022 at 05:37:37PM +0100, Krzysztof Kozlowski wrote:
On 12/12/2022 13:33, Manivannan Sadhasivam wrote:
The Qualcomm LLCC/EDAC drivers were using a fixed register stride for accessing the (Control and Status Registers) CSRs of each LLCC bank. This stride only works for some SoCs like SDM845 for which driver support was initially added.
But the later SoCs use different register stride that vary between the banks with holes in-between. So it is not possible to use a single register stride for accessing the CSRs of each bank. By doing so could result in a crash.
For fixing this issue, let's obtain the base address of each LLCC bank from devicetree and get rid of the fixed stride. This also means, we no longer need to rely on reg-names property and get the base addresses using index.
First index is LLCC bank 0 and last index is LLCC broadcast. If the SoC supports more than one bank, then those needs to be defined in devicetree for index from 1..N-1.
Cc: stable@vger.kernel.org # 4.20 Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver") Fixes: 27450653f1db ("drivers: edac: Add EDAC driver support for QCOM SoCs")
Your previous patches in the series had incorrect CC-stable/Fixes tags, thus I have doubts also here.
Sorry I do not agree with you. I wanted to backport binding, dts and driver patches to possible LTS kernels together and that's why I tagged stable list.
Either all goes to stable or none. If your question is more towards what if one goes before the other, then in that case I may need to specify the dependency of commits but that will look messy. I took the gamble because, the driver is already broken in stable kernels.
I understand the intention. Assuming SDM845 was working, by backporting it you affect all stable users while fixing other SoCs. Therefore the patch would be worth backports only if other users with SDM845 were not affected.
Reported-by: Parikshit Pareek quic_ppareek@quicinc.com Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
drivers/edac/qcom_edac.c | 14 +++--- drivers/soc/qcom/llcc-qcom.c | 72 +++++++++++++++++------------- include/linux/soc/qcom/llcc-qcom.h | 6 +-- 3 files changed, 48 insertions(+), 44 deletions(-)
diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c index 97a27e42dd61..5be93577fc03 100644 --- a/drivers/edac/qcom_edac.c +++ b/drivers/edac/qcom_edac.c @@ -213,7 +213,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) for (i = 0; i < reg_data.reg_cnt; i++) { synd_reg = reg_data.synd_reg + (i * 4);
ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg,
ret = regmap_read(drv->regmaps[bank], synd_reg, &synd_val);@@ -222,8 +222,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) reg_data.name, i, synd_val); }
- ret = regmap_read(drv->regmap,
drv->offsets[bank] + reg_data.count_status_reg,
- ret = regmap_read(drv->regmaps[bank], reg_data.count_status_reg, &err_cnt); if (ret) goto clear;
@@ -233,8 +232,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) edac_printk(KERN_CRIT, EDAC_LLCC, "%s: Error count: 0x%4x\n", reg_data.name, err_cnt);
- ret = regmap_read(drv->regmap,
drv->offsets[bank] + reg_data.ways_status_reg,
- ret = regmap_read(drv->regmaps[bank], reg_data.ways_status_reg, &err_ways); if (ret) goto clear;
@@ -296,8 +294,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl) /* Iterate over the banks and look for Tag RAM or Data RAM errors */ for (i = 0; i < drv->num_banks; i++) {
ret = regmap_read(drv->regmap,drv->offsets[i] + DRP_INTERRUPT_STATUS,
ret = regmap_read(drv->regmaps[i], DRP_INTERRUPT_STATUS, &drp_error);if (!ret && (drp_error & SB_ECC_ERROR)) { @@ -312,8 +309,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl) if (!ret) irq_rc = IRQ_HANDLED;
ret = regmap_read(drv->regmap,drv->offsets[i] + TRP_INTERRUPT_0_STATUS,
ret = regmap_read(drv->regmaps[i], TRP_INTERRUPT_0_STATUS, &trp_error);if (!ret && (trp_error & SB_ECC_ERROR)) { diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c index 23ce2f78c4ed..a29f22dad7fa 100644 --- a/drivers/soc/qcom/llcc-qcom.c +++ b/drivers/soc/qcom/llcc-qcom.c @@ -62,8 +62,6 @@ #define LLCC_TRP_WRSC_CACHEABLE_EN 0x21f2c #define LLCC_TRP_ALGO_CFG8 0x21f30 -#define BANK_OFFSET_STRIDE 0x80000
#define LLCC_VERSION_2_0_0_0 0x02000000 #define LLCC_VERSION_2_1_0_0 0x02010000 #define LLCC_VERSION_4_1_0_0 0x04010000 @@ -898,8 +896,8 @@ static int qcom_llcc_remove(struct platform_device *pdev) return 0; } -static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev,
const char *name)+static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev, u8 index,
const char *name){ void __iomem *base; struct regmap_config llcc_regmap_config = { @@ -909,7 +907,7 @@ static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev, .fast_io = true, };
- base = devm_platform_ioremap_resource_byname(pdev, name);
- base = devm_platform_ioremap_resource(pdev, index); if (IS_ERR(base)) return ERR_CAST(base);
@@ -927,6 +925,7 @@ static int qcom_llcc_probe(struct platform_device *pdev) const struct llcc_slice_config *llcc_cfg; u32 sz; u32 version;
- struct regmap *regmap;
drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL); if (!drv_data) { @@ -934,21 +933,51 @@ static int qcom_llcc_probe(struct platform_device *pdev) goto err; }
- drv_data->regmap = qcom_llcc_init_mmio(pdev, "llcc_base");
- if (IS_ERR(drv_data->regmap)) {
ret = PTR_ERR(drv_data->regmap);
- /* Initialize the first LLCC bank regmap */
- regmap = qcom_llcc_init_mmio(pdev, i, "llcc0_base");
What is the value of "i" here? Looks like not initialized in my next.
Yes, this was a mistake and been reported by kernel bot. It will be fixed in next version.
- if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
- drv_data->bcast_regmap =
qcom_llcc_init_mmio(pdev, "llcc_broadcast_base");
- cfg = of_device_get_match_data(&pdev->dev);
- ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
- if (ret)
goto err;- num_banks &= LLCC_LB_CNT_MASK;
- num_banks >>= LLCC_LB_CNT_SHIFT;
- drv_data->num_banks = num_banks;
- drv_data->regmaps = devm_kcalloc(dev, num_banks, sizeof(*drv_data->regmaps), GFP_KERNEL);
- if (!drv_data->regmaps) {
ret = -ENOMEM;goto err;- }
- drv_data->regmaps[0] = regmap;
- /* Initialize rest of LLCC bank regmaps */
- for (i = 1; i < num_banks; i++) {
char *base = kasprintf(GFP_KERNEL, "llcc%d_base", i);drv_data->regmaps[i] = qcom_llcc_init_mmio(pdev, i, base);if (IS_ERR(drv_data->regmaps[i])) {ret = PTR_ERR(drv_data->regmaps[i]);kfree(base);goto err;This looks like the ABI break so:
- Existing users are broken,
I fixed the dts for all affected SoCs, then who are all other existing users?
In the case of the bindings and DTS the other users are: All DTS in the wild (out-of-tree customers, forks), all other operating systems (BSD), firmware and bootloaders.
In the case of the driver we talk about all out of tree DTS, which you did not fix. Kernel must work with old or any other DTB which conforms to the ABI (bindings). You cannot change ABI to work around that...
- It cannot be backported.
This is a bug fix and clearly needs to be backported along with the dts changes. For this purpose only I have tagged both dts and driver patches for backporting. Am I missing anything here?
You cannot backport ABI break for Linux. We assume ABI should not be broken for current/future releases, but this we sometimes ignore. There are reasons. However for the past and stable releases - it's a no go... unless it never, never worked.
What you can do, is to have patch which does not break ABI for working platforms (SDM845?). Such patch can be backported.
Best regards, Krzysztof
linux-stable-mirror@lists.linaro.org
-
Krzysztof Kozlowski -
Manivannan Sadhasivam