According to the "GPIO Expander Map / Table" section of the J722S EVM Schematic within the Evaluation Module Design Files package [0], the GPIO Pin P05 located on the GPIO Expander 1 (I2C0/0x23) has to be pulled down to select the Type-C interface. Since commit under Fixes claims to enable the Type-C interface, update the property within "p05-hog" from "output-high" to "output-low", thereby switching from the Type-A interface to the Type-C interface.

[0]: https://www.ti.com/lit/zip/sprr495 Cc: stable@vger.kernel.org Fixes: 485705df5d5f ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM") Signed-off-by: Siddharth Vadapalli s-vadapalli@ti.com ---

Hello,

This patch is based on commit 86731a2a651e Linux 6.16-rc3 of Mainline Linux.

Regards, Siddharth.

arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts index a47852fdca70..d0533723412a 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -634,7 +634,7 @@ p05-hog { /* P05 - USB2.0_MUX_SEL */ gpio-hog; gpios = <5 GPIO_ACTIVE_LOW>; - output-high; + output-low; };

p01_hog: p01-hog {