This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 6.1.56-rc1
Mario Limonciello mario.limonciello@amd.com ASoC: amd: yc: Fix a non-functional mic on Lenovo 82TL
Michal Hocko mhocko@suse.com mm, memcg: reconsider kmem.limit_in_bytes deprecation
Michal Hocko mhocko@suse.com memcg: drop kmem.limit_in_bytes
Jani Nikula jani.nikula@intel.com drm/meson: fix memory leak on ->hpd_notify callback
YuBiao Wang YuBiao.Wang@amd.com drm/amdkfd: Use gpu_offset for user queue's wptr
Greg Ungerer gerg@kernel.org fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
Linus Walleij linus.walleij@linaro.org power: supply: ab8500: Set typing and props
Nicolas Frattaroli frattaroli.nicolas@gmail.com power: supply: rk817: Add missing module alias
Javier Pello devel@otheo.eu drm/i915/gt: Fix reservation address in ggtt_reserve_guc_top
Matthias Schiffer mschiffer@universe-factory.net ata: libata-sata: increase PMP SRST timeout to 10s
Damien Le Moal dlemoal@kernel.org ata: libata-core: Do not register PM operations for SAS ports
Damien Le Moal dlemoal@kernel.org ata: libata-core: Fix port and device removal
Damien Le Moal dlemoal@kernel.org ata: libata-core: Fix ata_port_request_pm() locking
Quang Le quanglex97@gmail.com fs/smb/client: Reset password pointer to NULL
Mika Westerberg mika.westerberg@linux.intel.com net: thunderbolt: Fix TCPv6 GSO checksum calculation
Nick Desaulniers ndesaulniers@google.com bpf: Fix BTF_ID symbol generation collision in tools/
Jiri Olsa jolsa@kernel.org bpf: Fix BTF_ID symbol generation collision
Jiri Olsa jolsa@kernel.org bpf: Add override check to kprobe multi link attach
Ricardo Ribalda ribalda@chromium.org media: uvcvideo: Fix OOB read
Josef Bacik josef@toxicpanda.com btrfs: properly report 0 avail for very full file systems
Steven Rostedt (Google) rostedt@goodmis.org ring-buffer: Update "shortest_full" in polling
Johannes Weiner hannes@cmpxchg.org mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement
Rafael Aquini aquini@redhat.com mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy()
Jinjie Ruan ruanjinjie@huawei.com mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()
Mikko Rapeli mikko.rapeli@linaro.org arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y
Janusz Krzysztofik janusz.krzysztofik@linux.intel.com drm/tests: Fix incorrect argument in drm_test_mm_insert_range
Frederic Weisbecker frederic@kernel.org timers: Tag (hr)timer softirq as hotplug safe
Trond Myklebust trond.myklebust@hammerspace.com Revert "SUNRPC dont update timeout value on connection reset"
Florian Westphal fw@strlen.de netfilter: nf_tables: fix kdoc warnings after gc rework
Joel Fernandes (Google) joel@joelfernandes.org sched/rt: Fix live lock between select_fallback_rq() and RT push
Liam R. Howlett Liam.Howlett@oracle.com kernel/sched: Modify initial boot task idle setup
August Wikerfors git@augustwikerfors.se ASoC: amd: yc: Fix non-functional mic on Lenovo 82QF and 82UG
Heiner Kallweit hkallweit1@gmail.com i2c: i801: unregister tco_pdev in i801_probe() error path
Jens Axboe axboe@kernel.dk io_uring/fs: remove sqe->rw_flags checking from LINKAT
Niklas Cassel niklas.cassel@wdc.com ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
Damien Le Moal dlemoal@kernel.org ata: libata-scsi: link ata port and scsi device
Huacai Chen chenhuacai@kernel.org LoongArch: numa: Fix high_memory calculation
Tiezhu Yang yangtiezhu@loongson.cn LoongArch: Define relocation types for ABI v2.10
Kailang Yang kailang@realtek.com ALSA: hda: Disable power save for solving pop issue on Lenovo ThinkCentre M70q
Pablo Neira Ayuso pablo@netfilter.org netfilter: nf_tables: disallow rule removal from chain binding
Pan Bian bianpan2016@163.com nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
Andy Shevchenko andriy.shevchenko@linux.intel.com serial: 8250_port: Check IRQ data before use
Daniel Starke daniel.starke@siemens.com Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux"
Ricky WU ricky_wu@realtek.com misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe
Paolo Abeni pabeni@redhat.com mptcp: fix bogus receive window shrinkage with multiple subflows
Paolo Bonzini pbonzini@redhat.com KVM: x86/mmu: Do not filter address spaces in for_each_tdp_mmu_root_yield_safe()
Sean Christopherson seanjc@google.com KVM: x86/mmu: Open code leaf invalidation from mmu_notifier
Tom Lendacky thomas.lendacky@amd.com KVM: SVM: Fix TSC_AUX virtualization setup
Paolo Bonzini pbonzini@redhat.com KVM: SVM: INTERCEPT_RDTSCP is never intercepted anyway
Pu Wen puwen@hygon.cn x86/srso: Add SRSO mitigation for Hygon processors
Haitao Huang haitao.huang@linux.intel.com x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race
Nicolin Chen nicolinc@nvidia.com iommu/arm-smmu-v3: Fix soft lockup triggered by arm_smmu_mm_invalidate_range
Roberto Sassu roberto.sassu@huawei.com smack: Retrieve transmuting information in smack_inode_getsecurity()
Roberto Sassu roberto.sassu@huawei.com smack: Record transmuting in smk_transmuted
Irvin Cote irvin.cote@insa-lyon.fr nvme-pci: always return an ERR_PTR from nvme_pci_alloc_dev
Gleb Chesnokov gleb.chesnokov@scst.dev scsi: qla2xxx: Fix NULL pointer dereference in target mode
Sven Eckelmann sven@narfation.org wifi: ath11k: Don't drop tx_status when peer cannot be found
Pratyush Yadav ptyadav@amazon.de nvme-pci: do not set the NUMA node of device if it has none
Christoph Hellwig hch@lst.de nvme-pci: factor out a nvme_pci_alloc_dev helper
Christoph Hellwig hch@lst.de nvme-pci: factor the iod mempool creation into a helper
Arnaldo Carvalho de Melo acme@redhat.com perf build: Define YYNOMEM as YYNOABORT for bison < 3.81
Thomas Zimmermann tzimmermann@suse.de fbdev/sh7760fb: Depend on FB=y
Huacai Chen chenhuacai@kernel.org LoongArch: Set all reserved memblocks on Node#0 at initialization
Gerhard Engleder gerhard@engleder-embedded.com tsnep: Fix NAPI polling with budget 0
Gerhard Engleder gerhard@engleder-embedded.com tsnep: Fix NAPI scheduling
Sebastian Andrzej Siewior bigeasy@linutronix.de net: hsr: Add __packed to struct hsr_sup_tlv.
Johnathan Mantey johnathanx.mantey@intel.com ncsi: Propagate carrier gain/loss events to the NCSI controller
Benjamin Gray bgray@linux.ibm.com powerpc/watchpoints: Annotate atomic context in more places
Benjamin Gray bgray@linux.ibm.com powerpc/watchpoint: Disable pagefaults when getting user instruction
Benjamin Gray bgray@linux.ibm.com powerpc/watchpoints: Disable preemption in thread_change_pc()
Ranjani Sridharan ranjani.sridharan@linux.intel.com ASoC: SOF: Intel: MTL: Reduce the DSP init timeout
Olga Kornievskaia kolga@netapp.com NFSv4.1: fix zero value filehandle in post open getattr
Hans Verkuil hverkuil-cisco@xs4all.nl media: vb2: frame_vector.c: replace WARN_ONCE with a comment
Chancel Liu chancel.liu@nxp.com ASoC: imx-rpmsg: Set ignore_pmdown_time for dai_link
Mike Rapoport (IBM) rppt@kernel.org memblock tests: fix warning ‘struct seq_file’ declared inside parameter list
Mike Rapoport (IBM) rppt@kernel.org memblock tests: fix warning: "__ALIGN_KERNEL" redefined
Richard Fitzgerald rf@opensource.cirrus.com firmware: cirrus: cs_dsp: Only log list of algorithms in debug build
Richard Fitzgerald rf@opensource.cirrus.com ASoC: cs42l42: Don't rely on GPIOD_OUT_LOW to set RESET initially low
Richard Fitzgerald rf@opensource.cirrus.com ASoC: cs42l42: Ensure a reset pulse meets minimum pulse width.
Peter Ujfalusi peter.ujfalusi@linux.intel.com ALSA: hda: intel-sdw-acpi: Use u8 type for link index
Stanislav Fomichev sdf@google.com bpf: Clarify error expectations from bpf_clone_redirect
Hou Tao houtao1@huawei.com bpf: Ensure unit_size is matched with slab cache object size
Mika Westerberg mika.westerberg@linux.intel.com spi: intel-pci: Add support for Granite Rapids SPI serial flash
Shengjiu Wang shengjiu.wang@nxp.com ASoC: fsl: imx-pcm-rpmsg: Add SNDRV_PCM_INFO_BATCH flag
Valentin Caron valentin.caron@foss.st.com spi: stm32: add a delay before SPI disable
Han Xu han.xu@nxp.com spi: nxp-fspi: reset the FLSHxCR1 registers
Niklas Cassel niklas.cassel@wdc.com ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
Steve French stfrench@microsoft.com smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPP
Michal Grzedzicki mge@meta.com scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command
Michal Grzedzicki mge@meta.com scsi: pm80xx: Use phy-specific SAS address when sending PHY_START command
Icenowy Zheng uwu@icenowy.me riscv: errata: fix T-Head dcache.cva encoding
David Francis David.Francis@amd.com drm/amdgpu: Handle null atom context in VBIOS info ioctl
Alex Deucher alexander.deucher@amd.com drm/amdgpu/nbio4.3: set proper rmmio_remap.reg_offset for SR-IOV
Alex Deucher alexander.deucher@amd.com drm/amdgpu/soc21: don't remap HDP registers for SR-IOV
Swapnil Patel swapnil.patel@amd.com drm/amd/display: Don't check registers, if using AUX BL control
Julia Lawall Julia.Lawall@inria.fr thermal/of: add missing of_node_put()
Luke D. Jones luke@ljones.dev platform/x86: asus-wmi: Support 2023 ROG X16 tablet mode
David Thompson davthompson@nvidia.com platform/mellanox: mlxbf-bootctl: add NET dependency into Kconfig
Christophe JAILLET christophe.jaillet@wanadoo.fr ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
Guangguan Wang guangguan.wang@linux.alibaba.com net/smc: bugfix for smcr v2 server connect success statistic
Steven Rostedt (Google) rostedt@goodmis.org ring-buffer: Do not attempt to read past "commit"
Ricardo B. Marliere rbmarliere@gmail.com selftests: fix dependency checker script
Filipe Manana fdmanana@suse.com btrfs: assert delayed node locked when removing delayed item
Zheng Yejian zhengyejian1@huawei.com ring-buffer: Avoid softlockup in ring_buffer_resize()
Zheng Yejian zhengyejian1@huawei.com selftests/ftrace: Correctly enable event in instance-event.tc
Kiwoong Kim kwmad.kim@samsung.com scsi: ufs: core: Poll HCS.UCRDY before issuing a UIC command
Kiwoong Kim kwmad.kim@samsung.com scsi: ufs: core: Move __ufshcd_send_uic_cmd() outside host_lock
Javed Hasan jhasan@marvell.com scsi: qedf: Add synchronization between I/O completions and abort
Helge Deller deller@gmx.de parisc: irq: Make irq_stack_union static to avoid sparse warning
Helge Deller deller@gmx.de parisc: drivers: Fix sparse warning
Helge Deller deller@gmx.de parisc: iosapic.c: Fix sparse warnings
Helge Deller deller@gmx.de parisc: sba: Fix compile warning wrt list of SBA devices
Nigel Kirkland nkirkland2304@gmail.com nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid()
Tobias Schramm t.schramm@manjaro.org spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain
Tobias Schramm t.schramm@manjaro.org spi: sun6i: reduce DMA RX transfer width to single byte
Daniel Borkmann daniel@iogearbox.net bpf: Annotate bpf_long_memcpy with data_race
Sergey Senozhatsky senozhatsky@chromium.org dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock
Xiubo Li xiubli@redhat.com ceph: drop messages from MDS when unmounting
Sean Christopherson seanjc@google.com x86/reboot: VMCLEAR active VMCSes before emergency reboot
William A. Kennington III william@wkennington.com i2c: npcm7xx: Fix callback completion ordering
Wenhua Lin Wenhua.Lin@unisoc.com gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chip
Sudeep Holla sudeep.holla@arm.com firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND
Rob Herring robh@kernel.org arm64: dts: imx: Add imx8mm-prt8mm.dtb to build
Nathan Rossi nathan.rossi@digi.com soc: imx8m: Enable OCOTP clock for imx8mm before reading registers
Michael Ellerman mpe@ellerman.id.au selftests/powerpc: Fix emit_tests to work with run_kselftest.sh
Benjamin Gray bgray@linux.ibm.com selftests/powerpc: Pass make context to children
Benjamin Gray bgray@linux.ibm.com selftests/powerpc: Use CLEAN macro to fix make warning
Chris Morgan macromorgan@hotmail.com power: supply: rk817: Fix node refcount leak
Max Filippov jcmvbkbc@gmail.com xtensa: boot/lib: fix function prototypes
Randy Dunlap rdunlap@infradead.org xtensa: umulsidi3: fix conditional expression
Randy Dunlap rdunlap@infradead.org xtensa: boot: don't add include-dirs
Randy Dunlap rdunlap@infradead.org xtensa: iss/network: make functions static
Max Filippov jcmvbkbc@gmail.com xtensa: add default definition for XCHAL_HAVE_DIV32
Christophe JAILLET christophe.jaillet@wanadoo.fr firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels()
Dan Carpenter dan.carpenter@linaro.org power: supply: ucs1002: fix error code in ucs1002_get_property()
Tony Lindgren tony@atomide.com bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart wake-up
Tony Lindgren tony@atomide.com ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on boot
Tony Lindgren tony@atomide.com ARM: dts: Unify pinctrl-single pin group nodes for omap4
Tony Lindgren tony@atomide.com ARM: dts: Unify pwm-omap-dmtimer node names
Tony Lindgren tony@atomide.com ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4
Krzysztof Kozlowski krzysztof.kozlowski@linaro.org ARM: dts: omap: correct indentation
Timo Alho talho@nvidia.com clk: tegra: fix error return case for recalc_rate
Zhifeng Tang zhifeng.tang@unisoc.com clk: sprd: Fix thm_parents incorrect configuration
Harshit Mogalapalli harshit.m.mogalapalli@oracle.com power: supply: mt6370: Fix missing error code in mt6370_chg_toggle_cfo()
Sibi Sankar quic_sibis@quicinc.com firmware: arm_scmi: Fixup perf power-cost/microwatt support
Cristian Marussi cristian.marussi@arm.com firmware: arm_scmi: Harden perf domain info access
Adam Ford aford173@gmail.com bus: ti-sysc: Fix missing AM35xx SoC matching
Julien Panis jpanis@baylibre.com bus: ti-sysc: Use fsleep() instead of usleep_range() in sysc_reset()
Marek Vasut marex@denx.de drm/bridge: ti-sn65dsi83: Do not generate HFP/HBP/HSA and EOT packet
Charles Kearney charles.kearney@hpe.com spi: spi-gxp: BUG: Correct spi write return value
Christoph Hellwig hch@lst.de MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabled
Jinjie Ruan ruanjinjie@huawei.com vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent()
Qu Wenruo wqu@suse.com btrfs: reset destination buffer when read_extent_buffer() gets invalid range
Harish Kasiviswanathan Harish.Kasiviswanathan@amd.com drm/amdkfd: Insert missing TLB flush on GFX10 and later
Philip Yang Philip.Yang@amd.com drm/amdkfd: Flush TLB after unmapping for GFX v9.4.3
Nilesh Javali njavali@marvell.com scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()
Shreyas Deodhar sdeodhar@marvell.com scsi: qla2xxx: Select qpair depending on which CPU post_cmd() gets called
Sven Eckelmann sven@narfation.org wifi: ath11k: Cleanup mac80211 references on failure during tx_complete
Pradeep Kumar Chitrapu quic_pradeepc@quicinc.com wifi: ath11k: fix tx status reporting in encap offload mode
Amit Pundir amit.pundir@linaro.org arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
Holger Dengler dengler@linux.ibm.com s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_CLR2SECK2 IOCTL
Jaegeuk Kim jaegeuk@kernel.org f2fs: get out of a repeat loop when getting a locked data page
Chao Yu chao@kernel.org f2fs: optimize iteration over sparse directories
Krzysztof Kozlowski krzysztof.kozlowski@linaro.org ARM: dts: qcom: msm8974pro-castor: correct touchscreen syna,nosleep-mode
Krzysztof Kozlowski krzysztof.kozlowski@linaro.org ARM: dts: qcom: msm8974pro-castor: correct touchscreen function names
Krzysztof Kozlowski krzysztof.kozlowski@linaro.org ARM: dts: qcom: msm8974pro-castor: correct inverted X of touchscreen
Paul Cercueil paul@crapouillou.net ARM: dts: samsung: exynos4210-i9100: Fix LCD screen's physical size
Aleksey Nasibulin alealexpro100@ya.ru ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys EA6500 V2
Daniel Scally dan.scally@ideasonboard.com i2c: xiic: Correct return value check for xiic_reinit()
Liang He windhl@126.com i2c: mux: gpio: Add missing fwnode_handle_put()
Xiaoke Wang xkernel.wang@foxmail.com i2c: mux: demux-pinctrl: check the return value of devm_kstrdup()
Christophe JAILLET christophe.jaillet@wanadoo.fr gpio: tb10x: Fix an error handling path in tb10x_gpio_probe()
Zhang Xiaoxu zhangxiaoxu5@huawei.com cifs: Fix UAF in cifs_demultiplex_thread()
Ben Wolsieffer ben.wolsieffer@hefring.com proc: nommu: fix empty /proc/<pid>/maps
Ben Wolsieffer Ben.Wolsieffer@hefring.com proc: nommu: /proc/<pid>/maps: release mmap read lock
Muhammad Husaini Zulkifli muhammad.husaini.zulkifli@intel.com igc: Expose tx-usecs coalesce setting to user
Sebastian Andrzej Siewior bigeasy@linutronix.de octeontx2-pf: Do xdp_do_flush() after redirects.
Sebastian Andrzej Siewior bigeasy@linutronix.de bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI
Sebastian Andrzej Siewior bigeasy@linutronix.de net: ena: Flush XDP packets on error.
Sebastian Andrzej Siewior bigeasy@linutronix.de locking/seqlock: Do the lockdep annotation before locking in do_write_seqcount_begin_nested()
Umesh Nerlige Ramappa umesh.nerlige.ramappa@intel.com i915/pmu: Move execlist stats initialization to execlist specific setup
Jozsef Kadlecsik kadlec@netfilter.org netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
Florian Westphal fw@strlen.de netfilter: nf_tables: disable toggling dormant table state more than once
Artem Chernyshev artem.chernyshev@red-soft.ru net: rds: Fix possible NULL-pointer dereference
Ziyang Xuan william.xuanziyang@huawei.com team: fix null-ptr-deref when team device type is changed
Eric Dumazet edumazet@google.com net: bridge: use DEV_STATS_INC()
Jie Wang wangjie125@huawei.com net: hns3: add 5ms delay before clear firmware reset irq source
Jijie Shao shaojijie@huawei.com net: hns3: fix fail to delete tc flower rules during reset issue
Jian Shen shenjian15@huawei.com net: hns3: only enable unicast promisc when mac table full
Jie Wang wangjie125@huawei.com net: hns3: fix GRE checksum offload issue
Jie Wang wangjie125@huawei.com net: hns3: add cmdq check for vf periodic service task
Josh Poimboeuf jpoimboe@kernel.org x86/srso: Fix SBPB enablement for spec_rstack_overflow=off
Josh Poimboeuf jpoimboe@kernel.org x86/srso: Fix srso_show_state() side effect
Stephen Boyd swboyd@chromium.org platform/x86: intel_scu_ipc: Fail IPC send if still busy
Stephen Boyd swboyd@chromium.org platform/x86: intel_scu_ipc: Don't override scu in intel_scu_ipc_dev_simple_command()
Stephen Boyd swboyd@chromium.org platform/x86: intel_scu_ipc: Check status upon timeout in ipc_wait_for_interrupt()
Stephen Boyd swboyd@chromium.org platform/x86: intel_scu_ipc: Check status after timeout in busy_loop()
Lukasz Majewski lukma@denx.de net: hsr: Properly parse HSRv1 supervisor frames.
Rik van Riel riel@surriel.com x86/mm, kexec, ima: Use memblock_free_late() from ima_free_kexec_buffer()
Eric Dumazet edumazet@google.com dccp: fix dccp_v4_err()/dccp_v6_err() again
Kajol Jain kjain@linux.ibm.com powerpc/perf/hv-24x7: Update domain value check
Eric Dumazet edumazet@google.com scsi: iscsi_tcp: restrict to TCP sockets
Kyle Zeng zengyhkyle@gmail.com ipv4: fix null-deref in ipv4_link_failure
Vinicius Costa Gomes vinicius.gomes@intel.com igc: Fix infinite initialization loop with early XDP redirect
David Christensen drc@linux.vnet.ibm.com ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Ilya Leoshkevich iii@linux.ibm.com netfilter, bpf: Adjust timeouts of non-confirmed CTs in bpf_ct_insert_entry()
Ivan Vecera ivecera@redhat.com i40e: Fix VF VLAN offloading when port VLAN is configured
Petr Oros poros@redhat.com iavf: schedule a request immediately after add/delete vlan
Petr Oros poros@redhat.com iavf: add iavf_schedule_aq_request() helper
Peter Ujfalusi peter.ujfalusi@linux.intel.com ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful
Radoslaw Tyl radoslawx.tyl@intel.com iavf: do not process adminq tasks when __IAVF_IN_REMOVE_TASK is set
Shinas Rasheed srasheed@marvell.com octeon_ep: fix tx dma unmap len values in SG
Shengjiu Wang shengjiu.wang@nxp.com ASoC: imx-audmix: Fix return error with devm_clk_get()
Chen Ni nichen@iscas.ac.cn ASoC: hdaudio.c: Add missing check for devm_kstrdup
Sasha Neftin sasha.neftin@intel.com net/core: Fix ETH_P_1588 flow dissector
Sabrina Dubroca sd@queasysnail.net selftests: tls: swap the TX and RX sockets in some tests
Florian Westphal fw@strlen.de netfilter: conntrack: fix extension size table
Knyazev Arseniy poseaydone@ya.ru ALSA: hda/realtek: Splitting the UX3402 into two separate models
Hans de Goede hdegoede@redhat.com ASoC: rt5640: Fix IRQ not being free-ed for HDA jack detect mode
Hans de Goede hdegoede@redhat.com ASoC: rt5640: Revert "Fix sleep in atomic context"
Toke Høiland-Jørgensen toke@redhat.com bpf: Avoid deadlock when using queue and stack maps from NMI
Pablo Neira Ayuso pablo@netfilter.org netfilter: nf_tables: disallow element removal on anonymous sets
Jerome Brunet jbrunet@baylibre.com ASoC: meson: spdifin: start hw on dai probe
Florian Westphal fw@strlen.de netfilter: nf_tables: fix memleak when more than 255 elements expired
Pablo Neira Ayuso pablo@netfilter.org netfilter: nft_set_hash: try later when GC hits EAGAIN on iteration
Pablo Neira Ayuso pablo@netfilter.org netfilter: nft_set_pipapo: stop GC iteration if GC transaction allocation fails
Pablo Neira Ayuso pablo@netfilter.org netfilter: nft_set_pipapo: call nft_trans_gc_queue_sync() in catchall GC
Pablo Neira Ayuso pablo@netfilter.org netfilter: nft_set_rbtree: use read spinlock to avoid datapath contention
Pablo Neira Ayuso pablo@netfilter.org netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
Florian Westphal fw@strlen.de netfilter: nf_tables: defer gc run if previous batch is still pending
Pablo Neira Ayuso pablo@netfilter.org netfilter: nf_tables: use correct lock to protect gc_list
Pablo Neira Ayuso pablo@netfilter.org netfilter: nf_tables: GC transaction race with abort path
Pablo Neira Ayuso pablo@netfilter.org netfilter: nf_tables: GC transaction race with netns dismantle
Pablo Neira Ayuso pablo@netfilter.org netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
Florian Westphal fw@strlen.de netfilter: nf_tables: don't fail inserts if duplicate has expired
Pablo Neira Ayuso pablo@netfilter.org netfilter: nf_tables: remove busy mark and gc batch API
Pablo Neira Ayuso pablo@netfilter.org netfilter: nft_set_hash: mark set element as dead when deleting from packet path
Pablo Neira Ayuso pablo@netfilter.org netfilter: nf_tables: adapt set backend to use GC transaction API
Pablo Neira Ayuso pablo@netfilter.org netfilter: nf_tables: GC transaction API to avoid race with control plane
Florian Westphal fw@strlen.de netfilter: nf_tables: don't skip expired elements during walk
Jan Kara jack@suse.cz ext4: do not let fstrim block system suspend
Jan Kara jack@suse.cz ext4: move setting of trimmed bit into ext4_try_to_trim_range()
Kemeng Shi shikemeng@huaweicloud.com ext4: replace the traditional ternary conditional operator with with max()/min()
Filipe Manana fdmanana@suse.com btrfs: remove BUG() after failure to insert delayed dir index item
Filipe Manana fdmanana@suse.com btrfs: improve error message after failure to add delayed dir index item
Mikulas Patocka mpatocka@redhat.com dm: fix a race condition in retrieve_deps
Namhyung Kim namhyung@kernel.org perf build: Update build rule for generated files
Dave Wysochanski dwysocha@redhat.com netfs: Only call folio_start_fscache() one time for each folio
Sakari Ailus sakari.ailus@linux.intel.com media: via: Use correct dependency for camera sensor drivers
Sakari Ailus sakari.ailus@linux.intel.com media: v4l: Use correct dependency for camera sensor drivers
Olga Kornievskaia kolga@netapp.com NFSv4.1: fix pnfs MDS=DS session trunking
Olga Kornievskaia kolga@netapp.com NFSv4.1: use EXCHGID4_FLAG_USE_PNFS_DS for DS server
Trond Myklebust trond.myklebust@hammerspace.com SUNRPC: Mark the cred for revalidation if the server rejects it
Trond Myklebust trond.myklebust@hammerspace.com NFS/pNFS: Report EINVAL errors from connect() to the server
Trond Myklebust trond.myklebust@hammerspace.com NFS: More fixes for nfs_direct_write_reschedule_io()
Trond Myklebust trond.myklebust@hammerspace.com NFS: Use the correct commit info in nfs_join_page_group()
Trond Myklebust trond.myklebust@hammerspace.com NFS: More O_DIRECT accounting fixes for error paths
Trond Myklebust trond.myklebust@hammerspace.com NFS: Fix O_DIRECT locking issues
Trond Myklebust trond.myklebust@hammerspace.com NFS: Fix error handling for O_DIRECT write scheduling
-------------
Diffstat:
Documentation/admin-guide/cgroup-v1/memory.rst | 9 +- Makefile | 4 +- arch/arm/boot/dts/am335x-guardian.dts | 3 +- arch/arm/boot/dts/am3517-evm.dts | 2 +- arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 3 +- arch/arm/boot/dts/exynos4210-i9100.dts | 4 +- arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 2 +- arch/arm/boot/dts/motorola-mapphone-common.dtsi | 48 +-- arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi | 6 +- arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi | 6 +- arch/arm/boot/dts/omap3-cm-t3517.dts | 12 +- arch/arm/boot/dts/omap3-cpu-thermal.dtsi | 3 +- arch/arm/boot/dts/omap3-gta04.dtsi | 8 +- arch/arm/boot/dts/omap3-ldp.dts | 2 +- arch/arm/boot/dts/omap3-n900.dts | 40 +-- arch/arm/boot/dts/omap3-zoom3.dts | 44 +-- arch/arm/boot/dts/omap4-cpu-thermal.dtsi | 29 +- arch/arm/boot/dts/omap4-duovero-parlor.dts | 12 +- arch/arm/boot/dts/omap4-duovero.dtsi | 18 +- arch/arm/boot/dts/omap4-kc1.dts | 14 +- arch/arm/boot/dts/omap4-mcpdm.dtsi | 2 +- arch/arm/boot/dts/omap4-panda-common.dtsi | 30 +- arch/arm/boot/dts/omap4-panda-es.dts | 8 +- arch/arm/boot/dts/omap4-sdp.dts | 36 +- arch/arm/boot/dts/omap4-var-om44customboard.dtsi | 24 +- arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi | 6 +- arch/arm/boot/dts/omap4-var-som-om44.dtsi | 22 +- arch/arm/boot/dts/omap443x.dtsi | 1 + arch/arm/boot/dts/omap4460.dtsi | 1 + arch/arm/boot/dts/omap5-cm-t54.dts | 56 +-- .../qcom-msm8974pro-sony-xperia-shinano-castor.dts | 8 +- arch/arm/boot/dts/twl6030_omap4.dtsi | 4 +- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 9 + arch/arm64/configs/defconfig | 1 - arch/loongarch/include/asm/elf.h | 9 + arch/loongarch/kernel/mem.c | 4 +- arch/loongarch/kernel/module.c | 2 +- arch/loongarch/kernel/numa.c | 2 +- arch/mips/alchemy/devboards/db1000.c | 4 + arch/mips/alchemy/devboards/db1200.c | 6 + arch/mips/alchemy/devboards/db1300.c | 4 + arch/parisc/include/asm/ropes.h | 3 + arch/parisc/kernel/drivers.c | 2 +- arch/parisc/kernel/irq.c | 2 +- arch/powerpc/kernel/hw_breakpoint.c | 16 +- arch/powerpc/kernel/hw_breakpoint_constraints.c | 7 +- arch/powerpc/perf/hv-24x7.c | 2 +- arch/riscv/include/asm/errata_list.h | 4 +- arch/x86/include/asm/kexec.h | 2 - arch/x86/include/asm/reboot.h | 2 + arch/x86/kernel/cpu/bugs.c | 4 +- arch/x86/kernel/cpu/common.c | 2 +- arch/x86/kernel/cpu/sgx/encl.c | 30 +- arch/x86/kernel/crash.c | 31 -- arch/x86/kernel/reboot.c | 22 ++ arch/x86/kernel/setup.c | 8 +- arch/x86/kvm/mmu/mmu.c | 8 +- arch/x86/kvm/mmu/tdp_mmu.c | 31 +- arch/x86/kvm/mmu/tdp_mmu.h | 3 +- arch/x86/kvm/svm/sev.c | 34 +- arch/x86/kvm/svm/svm.c | 9 +- arch/x86/kvm/svm/svm.h | 1 + arch/x86/kvm/vmx/vmx.c | 10 +- arch/xtensa/boot/Makefile | 3 +- arch/xtensa/boot/lib/zmem.c | 5 +- arch/xtensa/include/asm/core.h | 4 + arch/xtensa/lib/umulsidi3.S | 4 +- arch/xtensa/platforms/iss/network.c | 4 +- drivers/ata/libata-core.c | 47 ++- drivers/ata/libata-eh.c | 13 +- drivers/ata/libata-scsi.c | 47 ++- drivers/ata/libata-transport.c | 9 +- drivers/ata/libata.h | 2 + drivers/ata/sata_mv.c | 4 +- drivers/bus/ti-sysc.c | 31 +- drivers/char/agp/parisc-agp.c | 2 - drivers/clk/sprd/ums512-clk.c | 2 +- drivers/clk/tegra/clk-bpmp.c | 2 +- drivers/firmware/arm_ffa/driver.c | 16 +- drivers/firmware/arm_scmi/perf.c | 93 +++-- drivers/firmware/cirrus/cs_dsp.c | 34 +- drivers/firmware/imx/imx-dsp.c | 1 + drivers/gpio/gpio-pmic-eic-sprd.c | 1 + drivers/gpio/gpio-tb10x.c | 6 +- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 17 +- drivers/gpu/drm/amd/amdgpu/nbio_v4_3.c | 3 + drivers/gpu/drm/amd/amdgpu/soc21.c | 2 +- .../gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 2 +- drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 5 +- .../amd/display/dc/dce110/dce110_hw_sequencer.c | 4 +- drivers/gpu/drm/bridge/ti-sn65dsi83.c | 4 +- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 1 - .../gpu/drm/i915/gt/intel_execlists_submission.c | 2 + drivers/gpu/drm/i915/gt/intel_ggtt.c | 23 +- drivers/gpu/drm/meson/meson_encoder_hdmi.c | 2 + drivers/gpu/drm/tests/drm_mm_test.c | 2 +- drivers/i2c/busses/i2c-i801.c | 1 + drivers/i2c/busses/i2c-npcm7xx.c | 17 +- drivers/i2c/busses/i2c-xiic.c | 2 +- drivers/i2c/muxes/i2c-demux-pinctrl.c | 4 + drivers/i2c/muxes/i2c-mux-gpio.c | 4 +- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 27 +- drivers/md/dm-core.h | 1 + drivers/md/dm-ioctl.c | 7 +- drivers/md/dm-table.c | 32 +- drivers/media/common/videobuf2/frame_vector.c | 6 +- drivers/media/platform/marvell/Kconfig | 4 +- drivers/media/platform/via/Kconfig | 2 +- drivers/media/usb/em28xx/Kconfig | 4 +- drivers/media/usb/go7007/Kconfig | 2 +- drivers/media/usb/uvc/uvc_ctrl.c | 3 + drivers/misc/cardreader/rts5227.c | 55 +-- drivers/misc/cardreader/rts5228.c | 57 +-- drivers/misc/cardreader/rts5249.c | 56 +-- drivers/misc/cardreader/rts5260.c | 43 +-- drivers/misc/cardreader/rts5261.c | 52 +-- drivers/misc/cardreader/rtsx_pcr.c | 51 ++- drivers/net/ethernet/amazon/ena/ena_netdev.c | 3 + drivers/net/ethernet/broadcom/bnxt/bnxt.c | 5 + drivers/net/ethernet/engleder/tsnep_main.c | 18 +- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 9 + .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 13 +- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 3 +- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 8 +- drivers/net/ethernet/intel/iavf/iavf.h | 2 +- drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 2 +- drivers/net/ethernet/intel/iavf/iavf_main.c | 17 +- drivers/net/ethernet/intel/igc/igc_ethtool.c | 31 +- drivers/net/ethernet/intel/igc/igc_main.c | 2 +- .../net/ethernet/marvell/octeon_ep/octep_main.c | 8 +- drivers/net/ethernet/marvell/octeon_ep/octep_tx.c | 8 +- drivers/net/ethernet/marvell/octeon_ep/octep_tx.h | 16 +- .../net/ethernet/marvell/octeontx2/nic/otx2_txrx.c | 19 +- drivers/net/ethernet/pensando/ionic/ionic_dev.h | 1 + drivers/net/ethernet/pensando/ionic/ionic_txrx.c | 10 +- drivers/net/team/team.c | 10 +- drivers/net/thunderbolt.c | 3 +- drivers/net/wireless/ath/ath11k/dp.h | 4 + drivers/net/wireless/ath/ath11k/dp_tx.c | 39 +- drivers/net/wireless/ath/ath11k/dp_tx.h | 1 + drivers/nvme/host/fc.c | 2 +- drivers/nvme/host/pci.c | 121 ++++--- drivers/parisc/iosapic.c | 4 +- drivers/parisc/iosapic_private.h | 4 +- drivers/platform/mellanox/Kconfig | 1 + drivers/platform/x86/asus-nb-wmi.c | 9 + drivers/platform/x86/intel_scu_ipc.c | 66 ++-- drivers/power/supply/ab8500_btemp.c | 9 +- drivers/power/supply/ab8500_chargalg.c | 2 +- drivers/power/supply/mt6370-charger.c | 2 +- drivers/power/supply/rk817_charger.c | 16 +- drivers/power/supply/ucs1002_power.c | 3 +- drivers/s390/crypto/pkey_api.c | 16 +- drivers/s390/crypto/zcrypt_ep11misc.c | 61 +++- drivers/s390/crypto/zcrypt_ep11misc.h | 3 +- drivers/scsi/iscsi_tcp.c | 4 + drivers/scsi/pm8001/pm8001_hwi.c | 2 +- drivers/scsi/pm8001/pm80xx_hwi.c | 4 +- drivers/scsi/qedf/qedf_io.c | 10 +- drivers/scsi/qedf/qedf_main.c | 7 +- drivers/scsi/qla2xxx/qla_def.h | 3 + drivers/scsi/qla2xxx/qla_init.c | 5 +- drivers/scsi/qla2xxx/qla_inline.h | 58 +++ drivers/scsi/qla2xxx/qla_isr.c | 12 +- drivers/scsi/qla2xxx/qla_nvme.c | 4 + drivers/scsi/qla2xxx/qla_os.c | 6 + drivers/scsi/qla2xxx/qla_target.c | 3 +- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 4 +- drivers/soc/imx/soc-imx8m.c | 10 + drivers/spi/spi-gxp.c | 2 +- drivers/spi/spi-intel-pci.c | 1 + drivers/spi/spi-nxp-fspi.c | 7 + drivers/spi/spi-stm32.c | 8 + drivers/spi/spi-sun6i.c | 31 +- drivers/thermal/thermal_of.c | 8 +- drivers/tty/n_gsm.c | 4 +- drivers/tty/serial/8250/8250_port.c | 5 +- drivers/ufs/core/ufshcd.c | 13 +- drivers/vfio/mdev/mdev_sysfs.c | 3 +- drivers/video/fbdev/Kconfig | 2 +- fs/binfmt_elf_fdpic.c | 5 +- fs/btrfs/delayed-inode.c | 85 +++-- fs/btrfs/extent_io.c | 8 +- fs/btrfs/super.c | 2 +- fs/ceph/caps.c | 6 +- fs/ceph/mds_client.c | 12 +- fs/ceph/mds_client.h | 11 +- fs/ceph/quota.c | 14 +- fs/ceph/snap.c | 10 +- fs/ceph/super.c | 75 +++- fs/ceph/super.h | 3 + fs/ext4/mballoc.c | 60 ++-- fs/f2fs/data.c | 25 +- fs/f2fs/dir.c | 34 +- fs/f2fs/f2fs.h | 5 +- fs/f2fs/gc.c | 4 +- fs/netfs/buffered_read.c | 6 +- fs/nfs/direct.c | 138 ++++--- fs/nfs/flexfilelayout/flexfilelayout.c | 1 + fs/nfs/nfs4client.c | 9 +- fs/nfs/nfs4proc.c | 10 +- fs/nfs/write.c | 23 +- fs/nilfs2/gcinode.c | 6 +- fs/proc/internal.h | 2 - fs/proc/task_nommu.c | 70 ++-- fs/smb/client/cifsglob.h | 1 + fs/smb/client/fs_context.c | 1 + fs/smb/client/inode.c | 2 +- fs/smb/client/smb2ops.c | 6 +- fs/smb/client/transport.c | 34 +- include/linux/bpf.h | 2 +- include/linux/btf_ids.h | 2 +- include/linux/if_team.h | 2 + include/linux/interrupt.h | 6 +- include/linux/libata.h | 4 +- include/linux/memcontrol.h | 4 +- include/linux/nfs_fs_sb.h | 1 + include/linux/nfs_page.h | 4 +- include/linux/resume_user_mode.h | 2 +- include/linux/seqlock.h | 2 +- include/net/netfilter/nf_tables.h | 127 +++---- include/uapi/linux/bpf.h | 4 +- io_uring/fs.c | 2 +- kernel/bpf/memalloc.c | 33 +- kernel/bpf/queue_stack_maps.c | 21 +- kernel/dma/debug.c | 20 +- kernel/sched/core.c | 2 +- kernel/sched/cpupri.c | 1 + kernel/sched/idle.c | 1 + kernel/trace/bpf_trace.c | 16 + kernel/trace/ring_buffer.c | 10 + mm/damon/vaddr-test.h | 2 + mm/memcontrol.c | 13 +- mm/slab_common.c | 12 +- net/bridge/br_forward.c | 4 +- net/bridge/br_input.c | 4 +- net/core/flow_dissector.c | 2 +- net/dccp/ipv4.c | 9 +- net/dccp/ipv6.c | 9 +- net/hsr/hsr_framereg.c | 4 +- net/hsr/hsr_main.h | 2 +- net/ipv4/route.c | 4 +- net/mptcp/options.c | 5 +- net/ncsi/ncsi-aen.c | 5 + net/netfilter/ipset/ip_set_core.c | 12 +- net/netfilter/nf_conntrack_bpf.c | 2 + net/netfilter/nf_conntrack_extend.c | 4 +- net/netfilter/nf_tables_api.c | 400 +++++++++++++++++---- net/netfilter/nft_set_hash.c | 87 +++-- net/netfilter/nft_set_pipapo.c | 71 ++-- net/netfilter/nft_set_rbtree.c | 161 +++++---- net/rds/rdma_transport.c | 12 +- net/smc/smc_stats.h | 3 +- net/sunrpc/clnt.c | 15 +- security/smack/smack.h | 1 + security/smack/smack_lsm.c | 63 +++- sound/hda/intel-sdw-acpi.c | 8 +- sound/pci/hda/hda_intel.c | 1 + sound/pci/hda/patch_realtek.c | 3 +- sound/soc/amd/yc/acp6x-mach.c | 21 ++ sound/soc/codecs/cs42l42.c | 10 + sound/soc/codecs/rt5640.c | 13 +- sound/soc/fsl/imx-audmix.c | 2 +- sound/soc/fsl/imx-pcm-rpmsg.c | 1 + sound/soc/fsl/imx-rpmsg.c | 8 + sound/soc/intel/avs/boards/hdaudio.c | 3 + sound/soc/meson/axg-spdifin.c | 49 +-- sound/soc/sof/core.c | 3 +- sound/soc/sof/intel/mtl.c | 2 +- sound/soc/sof/intel/mtl.h | 1 - tools/build/Makefile.build | 10 + tools/include/linux/btf_ids.h | 2 +- tools/include/linux/mm.h | 2 - tools/include/linux/seq_file.h | 2 + tools/include/uapi/linux/bpf.h | 4 +- tools/perf/pmu-events/Build | 6 + tools/perf/util/Build | 6 + tools/testing/memblock/tests/basic_api.c | 2 +- tools/testing/memblock/tests/common.h | 1 + .../ftrace/test.d/instances/instance-event.tc | 2 +- tools/testing/selftests/kselftest_deps.sh | 77 +++- tools/testing/selftests/net/tls.c | 8 +- tools/testing/selftests/powerpc/Makefile | 15 +- tools/testing/selftests/powerpc/pmu/Makefile | 40 ++- 285 files changed, 2895 insertions(+), 1583 deletions(-)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust trond.myklebust@hammerspace.com
[ Upstream commit 954998b60caa8f2a3bf3abe490de6f08d283687a ]
If we fail to schedule a request for transmission, there are 2 possibilities: 1) Either we hit a fatal error, and we just want to drop the remaining requests on the floor. 2) We were asked to try again, in which case we should allow the outstanding RPC calls to complete, so that we can recoalesce requests and try again.
Fixes: d600ad1f2bdb ("NFS41: pop some layoutget errors to application") Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/direct.c | 62 ++++++++++++++++++++++++++++++++++++------------- 1 file changed, 46 insertions(+), 16 deletions(-)
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 3bb530d4bb5ce..d71762f32b6c4 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -530,10 +530,9 @@ nfs_direct_write_scan_commit_list(struct inode *inode, static void nfs_direct_write_reschedule(struct nfs_direct_req *dreq) { struct nfs_pageio_descriptor desc; - struct nfs_page *req, *tmp; + struct nfs_page *req; LIST_HEAD(reqs); struct nfs_commit_info cinfo; - LIST_HEAD(failed);
nfs_init_cinfo_from_dreq(&cinfo, dreq); nfs_direct_write_scan_commit_list(dreq->inode, &reqs, &cinfo); @@ -551,27 +550,36 @@ static void nfs_direct_write_reschedule(struct nfs_direct_req *dreq) &nfs_direct_write_completion_ops); desc.pg_dreq = dreq;
- list_for_each_entry_safe(req, tmp, &reqs, wb_list) { + while (!list_empty(&reqs)) { + req = nfs_list_entry(reqs.next); /* Bump the transmission count */ req->wb_nio++; if (!nfs_pageio_add_request(&desc, req)) { - nfs_list_move_request(req, &failed); spin_lock(&cinfo.inode->i_lock); - dreq->flags = 0; - if (desc.pg_error < 0) + if (dreq->error < 0) { + desc.pg_error = dreq->error; + } else if (desc.pg_error != -EAGAIN) { + dreq->flags = 0; + if (!desc.pg_error) + desc.pg_error = -EIO; dreq->error = desc.pg_error; - else - dreq->error = -EIO; + } else + dreq->flags = NFS_ODIRECT_RESCHED_WRITES; spin_unlock(&cinfo.inode->i_lock); + break; } nfs_release_request(req); } nfs_pageio_complete(&desc);
- while (!list_empty(&failed)) { - req = nfs_list_entry(failed.next); + while (!list_empty(&reqs)) { + req = nfs_list_entry(reqs.next); nfs_list_remove_request(req); nfs_unlock_and_release_request(req); + if (desc.pg_error == -EAGAIN) + nfs_mark_request_commit(req, NULL, &cinfo, 0); + else + nfs_release_request(req); }
if (put_dreq(dreq)) @@ -796,9 +804,11 @@ static ssize_t nfs_direct_write_schedule_iovec(struct nfs_direct_req *dreq, { struct nfs_pageio_descriptor desc; struct inode *inode = dreq->inode; + struct nfs_commit_info cinfo; ssize_t result = 0; size_t requested_bytes = 0; size_t wsize = max_t(size_t, NFS_SERVER(inode)->wsize, PAGE_SIZE); + bool defer = false;
trace_nfs_direct_write_schedule_iovec(dreq);
@@ -839,19 +849,39 @@ static ssize_t nfs_direct_write_schedule_iovec(struct nfs_direct_req *dreq, break; }
+ pgbase = 0; + bytes -= req_len; + requested_bytes += req_len; + pos += req_len; + dreq->bytes_left -= req_len; + + if (defer) { + nfs_mark_request_commit(req, NULL, &cinfo, 0); + continue; + } + nfs_lock_request(req); req->wb_index = pos >> PAGE_SHIFT; req->wb_offset = pos & ~PAGE_MASK; - if (!nfs_pageio_add_request(&desc, req)) { + if (nfs_pageio_add_request(&desc, req)) + continue; + + /* Exit on hard errors */ + if (desc.pg_error < 0 && desc.pg_error != -EAGAIN) { result = desc.pg_error; nfs_unlock_and_release_request(req); break; } - pgbase = 0; - bytes -= req_len; - requested_bytes += req_len; - pos += req_len; - dreq->bytes_left -= req_len; + + /* If the error is soft, defer remaining requests */ + nfs_init_cinfo_from_dreq(&cinfo, dreq); + spin_lock(&cinfo.inode->i_lock); + dreq->flags = NFS_ODIRECT_RESCHED_WRITES; + spin_unlock(&cinfo.inode->i_lock); + nfs_unlock_request(req); + nfs_mark_request_commit(req, NULL, &cinfo, 0); + desc.pg_error = 0; + defer = true; } nfs_direct_release_pages(pagevec, npages); kvfree(pagevec);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust trond.myklebust@hammerspace.com
[ Upstream commit 7c6339322ce0c6128acbe36aacc1eeb986dd7bf1 ]
The dreq fields are protected by the dreq->lock.
Fixes: 954998b60caa ("NFS: Fix error handling for O_DIRECT write scheduling") Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/direct.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index d71762f32b6c4..449d248fc1ec7 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -555,7 +555,7 @@ static void nfs_direct_write_reschedule(struct nfs_direct_req *dreq) /* Bump the transmission count */ req->wb_nio++; if (!nfs_pageio_add_request(&desc, req)) { - spin_lock(&cinfo.inode->i_lock); + spin_lock(&dreq->lock); if (dreq->error < 0) { desc.pg_error = dreq->error; } else if (desc.pg_error != -EAGAIN) { @@ -565,7 +565,7 @@ static void nfs_direct_write_reschedule(struct nfs_direct_req *dreq) dreq->error = desc.pg_error; } else dreq->flags = NFS_ODIRECT_RESCHED_WRITES; - spin_unlock(&cinfo.inode->i_lock); + spin_unlock(&dreq->lock); break; } nfs_release_request(req); @@ -875,9 +875,9 @@ static ssize_t nfs_direct_write_schedule_iovec(struct nfs_direct_req *dreq,
/* If the error is soft, defer remaining requests */ nfs_init_cinfo_from_dreq(&cinfo, dreq); - spin_lock(&cinfo.inode->i_lock); + spin_lock(&dreq->lock); dreq->flags = NFS_ODIRECT_RESCHED_WRITES; - spin_unlock(&cinfo.inode->i_lock); + spin_unlock(&dreq->lock); nfs_unlock_request(req); nfs_mark_request_commit(req, NULL, &cinfo, 0); desc.pg_error = 0;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust trond.myklebust@hammerspace.com
[ Upstream commit 8982f7aff39fb526aba4441fff2525fcedd5e1a3 ]
If we hit a fatal error when retransmitting, we do need to record the removal of the request from the count of written bytes.
Fixes: 031d73ed768a ("NFS: Fix O_DIRECT accounting of number of bytes read/written") Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/direct.c | 47 +++++++++++++++++++++++++++++++---------------- 1 file changed, 31 insertions(+), 16 deletions(-)
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 449d248fc1ec7..d879c3229efdb 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -93,12 +93,10 @@ nfs_direct_handle_truncated(struct nfs_direct_req *dreq, dreq->max_count = dreq_len; if (dreq->count > dreq_len) dreq->count = dreq_len; - - if (test_bit(NFS_IOHDR_ERROR, &hdr->flags)) - dreq->error = hdr->error; - else /* Clear outstanding error if this is EOF */ - dreq->error = 0; } + + if (test_bit(NFS_IOHDR_ERROR, &hdr->flags) && !dreq->error) + dreq->error = hdr->error; }
static void @@ -120,6 +118,18 @@ nfs_direct_count_bytes(struct nfs_direct_req *dreq, dreq->count = dreq_len; }
+static void nfs_direct_truncate_request(struct nfs_direct_req *dreq, + struct nfs_page *req) +{ + loff_t offs = req_offset(req); + size_t req_start = (size_t)(offs - dreq->io_start); + + if (req_start < dreq->max_count) + dreq->max_count = req_start; + if (req_start < dreq->count) + dreq->count = req_start; +} + /** * nfs_swap_rw - NFS address space operation for swap I/O * @iocb: target I/O control block @@ -539,10 +549,6 @@ static void nfs_direct_write_reschedule(struct nfs_direct_req *dreq)
nfs_direct_join_group(&reqs, dreq->inode);
- dreq->count = 0; - dreq->max_count = 0; - list_for_each_entry(req, &reqs, wb_list) - dreq->max_count += req->wb_bytes; nfs_clear_pnfs_ds_commit_verifiers(&dreq->ds_cinfo); get_dreq(dreq);
@@ -576,10 +582,14 @@ static void nfs_direct_write_reschedule(struct nfs_direct_req *dreq) req = nfs_list_entry(reqs.next); nfs_list_remove_request(req); nfs_unlock_and_release_request(req); - if (desc.pg_error == -EAGAIN) + if (desc.pg_error == -EAGAIN) { nfs_mark_request_commit(req, NULL, &cinfo, 0); - else + } else { + spin_lock(&dreq->lock); + nfs_direct_truncate_request(dreq, req); + spin_unlock(&dreq->lock); nfs_release_request(req); + } }
if (put_dreq(dreq)) @@ -599,8 +609,6 @@ static void nfs_direct_commit_complete(struct nfs_commit_data *data) if (status < 0) { /* Errors in commit are fatal */ dreq->error = status; - dreq->max_count = 0; - dreq->count = 0; dreq->flags = NFS_ODIRECT_DONE; } else { status = dreq->error; @@ -611,7 +619,12 @@ static void nfs_direct_commit_complete(struct nfs_commit_data *data) while (!list_empty(&data->pages)) { req = nfs_list_entry(data->pages.next); nfs_list_remove_request(req); - if (status >= 0 && !nfs_write_match_verf(verf, req)) { + if (status < 0) { + spin_lock(&dreq->lock); + nfs_direct_truncate_request(dreq, req); + spin_unlock(&dreq->lock); + nfs_release_request(req); + } else if (!nfs_write_match_verf(verf, req)) { dreq->flags = NFS_ODIRECT_RESCHED_WRITES; /* * Despite the reboot, the write was successful, @@ -619,7 +632,7 @@ static void nfs_direct_commit_complete(struct nfs_commit_data *data) */ req->wb_nio = 0; nfs_mark_request_commit(req, NULL, &cinfo, 0); - } else /* Error or match */ + } else nfs_release_request(req); nfs_unlock_and_release_request(req); } @@ -672,6 +685,7 @@ static void nfs_direct_write_clear_reqs(struct nfs_direct_req *dreq) while (!list_empty(&reqs)) { req = nfs_list_entry(reqs.next); nfs_list_remove_request(req); + nfs_direct_truncate_request(dreq, req); nfs_release_request(req); nfs_unlock_and_release_request(req); } @@ -721,7 +735,8 @@ static void nfs_direct_write_completion(struct nfs_pgio_header *hdr) }
nfs_direct_count_bytes(dreq, hdr); - if (test_bit(NFS_IOHDR_UNSTABLE_WRITES, &hdr->flags)) { + if (test_bit(NFS_IOHDR_UNSTABLE_WRITES, &hdr->flags) && + !test_bit(NFS_IOHDR_ERROR, &hdr->flags)) { if (!dreq->flags) dreq->flags = NFS_ODIRECT_DO_COMMIT; flags = dreq->flags;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust trond.myklebust@hammerspace.com
[ Upstream commit b193a78ddb5ee7dba074d3f28dc050069ba083c0 ]
Ensure that nfs_clear_request_commit() updates the correct counters when it removes them from the commit list.
Fixes: ed5d588fe47f ("NFS: Try to join page groups before an O_DIRECT retransmission") Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/direct.c | 8 +++++--- fs/nfs/write.c | 23 ++++++++++++----------- include/linux/nfs_page.h | 4 +++- 3 files changed, 20 insertions(+), 15 deletions(-)
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index d879c3229efdb..04ebe96336304 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -500,7 +500,9 @@ static void nfs_direct_add_page_head(struct list_head *list, kref_get(&head->wb_kref); }
-static void nfs_direct_join_group(struct list_head *list, struct inode *inode) +static void nfs_direct_join_group(struct list_head *list, + struct nfs_commit_info *cinfo, + struct inode *inode) { struct nfs_page *req, *subreq;
@@ -522,7 +524,7 @@ static void nfs_direct_join_group(struct list_head *list, struct inode *inode) nfs_release_request(subreq); } } while ((subreq = subreq->wb_this_page) != req); - nfs_join_page_group(req, inode); + nfs_join_page_group(req, cinfo, inode); } }
@@ -547,7 +549,7 @@ static void nfs_direct_write_reschedule(struct nfs_direct_req *dreq) nfs_init_cinfo_from_dreq(&cinfo, dreq); nfs_direct_write_scan_commit_list(dreq->inode, &reqs, &cinfo);
- nfs_direct_join_group(&reqs, dreq->inode); + nfs_direct_join_group(&reqs, &cinfo, dreq->inode);
nfs_clear_pnfs_ds_commit_verifiers(&dreq->ds_cinfo); get_dreq(dreq); diff --git a/fs/nfs/write.c b/fs/nfs/write.c index f41d24b54fd1f..0a8aed0ac9945 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -58,7 +58,8 @@ static const struct nfs_pgio_completion_ops nfs_async_write_completion_ops; static const struct nfs_commit_completion_ops nfs_commit_completion_ops; static const struct nfs_rw_ops nfs_rw_write_ops; static void nfs_inode_remove_request(struct nfs_page *req); -static void nfs_clear_request_commit(struct nfs_page *req); +static void nfs_clear_request_commit(struct nfs_commit_info *cinfo, + struct nfs_page *req); static void nfs_init_cinfo_from_inode(struct nfs_commit_info *cinfo, struct inode *inode); static struct nfs_page * @@ -502,8 +503,8 @@ nfs_destroy_unlinked_subrequests(struct nfs_page *destroy_list, * the (former) group. All subrequests are removed from any write or commit * lists, unlinked from the group and destroyed. */ -void -nfs_join_page_group(struct nfs_page *head, struct inode *inode) +void nfs_join_page_group(struct nfs_page *head, struct nfs_commit_info *cinfo, + struct inode *inode) { struct nfs_page *subreq; struct nfs_page *destroy_list = NULL; @@ -533,7 +534,7 @@ nfs_join_page_group(struct nfs_page *head, struct inode *inode) * Commit list removal accounting is done after locks are dropped */ subreq = head; do { - nfs_clear_request_commit(subreq); + nfs_clear_request_commit(cinfo, subreq); subreq = subreq->wb_this_page; } while (subreq != head);
@@ -567,8 +568,10 @@ nfs_lock_and_join_requests(struct page *page) { struct inode *inode = page_file_mapping(page)->host; struct nfs_page *head; + struct nfs_commit_info cinfo; int ret;
+ nfs_init_cinfo_from_inode(&cinfo, inode); /* * A reference is taken only on the head request which acts as a * reference to the whole page group - the group will not be destroyed @@ -585,7 +588,7 @@ nfs_lock_and_join_requests(struct page *page) return ERR_PTR(ret); }
- nfs_join_page_group(head, inode); + nfs_join_page_group(head, &cinfo, inode);
return head; } @@ -956,18 +959,16 @@ nfs_clear_page_commit(struct page *page) }
/* Called holding the request lock on @req */ -static void -nfs_clear_request_commit(struct nfs_page *req) +static void nfs_clear_request_commit(struct nfs_commit_info *cinfo, + struct nfs_page *req) { if (test_bit(PG_CLEAN, &req->wb_flags)) { struct nfs_open_context *ctx = nfs_req_openctx(req); struct inode *inode = d_inode(ctx->dentry); - struct nfs_commit_info cinfo;
- nfs_init_cinfo_from_inode(&cinfo, inode); mutex_lock(&NFS_I(inode)->commit_mutex); - if (!pnfs_clear_request_commit(req, &cinfo)) { - nfs_request_remove_commit_list(req, &cinfo); + if (!pnfs_clear_request_commit(req, cinfo)) { + nfs_request_remove_commit_list(req, cinfo); } mutex_unlock(&NFS_I(inode)->commit_mutex); nfs_clear_page_commit(req->wb_page); diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h index ba7e2e4b09264..e39a8cf8b1797 100644 --- a/include/linux/nfs_page.h +++ b/include/linux/nfs_page.h @@ -145,7 +145,9 @@ extern void nfs_unlock_request(struct nfs_page *req); extern void nfs_unlock_and_release_request(struct nfs_page *); extern struct nfs_page *nfs_page_group_lock_head(struct nfs_page *req); extern int nfs_page_group_lock_subrequests(struct nfs_page *head); -extern void nfs_join_page_group(struct nfs_page *head, struct inode *inode); +extern void nfs_join_page_group(struct nfs_page *head, + struct nfs_commit_info *cinfo, + struct inode *inode); extern int nfs_page_group_lock(struct nfs_page *); extern void nfs_page_group_unlock(struct nfs_page *); extern bool nfs_page_group_sync_on_bit(struct nfs_page *, unsigned int);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust trond.myklebust@hammerspace.com
[ Upstream commit b11243f720ee5f9376861099019c8542969b6318 ]
Ensure that all requests are put back onto the commit list so that they can be rescheduled.
Fixes: 4daaeba93822 ("NFS: Fix nfs_direct_write_reschedule_io()") Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/direct.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 04ebe96336304..5a976fa343df1 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -782,18 +782,23 @@ static void nfs_write_sync_pgio_error(struct list_head *head, int error) static void nfs_direct_write_reschedule_io(struct nfs_pgio_header *hdr) { struct nfs_direct_req *dreq = hdr->dreq; + struct nfs_page *req; + struct nfs_commit_info cinfo;
trace_nfs_direct_write_reschedule_io(dreq);
+ nfs_init_cinfo_from_dreq(&cinfo, dreq); spin_lock(&dreq->lock); - if (dreq->error == 0) { + if (dreq->error == 0) dreq->flags = NFS_ODIRECT_RESCHED_WRITES; - /* fake unstable write to let common nfs resend pages */ - hdr->verf.committed = NFS_UNSTABLE; - hdr->good_bytes = hdr->args.offset + hdr->args.count - - hdr->io_start; - } + set_bit(NFS_IOHDR_REDO, &hdr->flags); spin_unlock(&dreq->lock); + while (!list_empty(&hdr->pages)) { + req = nfs_list_entry(hdr->pages.next); + nfs_list_remove_request(req); + nfs_unlock_request(req); + nfs_mark_request_commit(req, NULL, &cinfo, 0); + } }
static const struct nfs_pgio_completion_ops nfs_direct_write_completion_ops = {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust trond.myklebust@hammerspace.com
[ Upstream commit dd7d7ee3ba2a70d12d02defb478790cf57d5b87b ]
With IPv6, connect() can occasionally return EINVAL if a route is unavailable. If this happens during I/O to a data server, we want to report it using LAYOUTERROR as an inability to connect.
Fixes: dd52128afdde ("NFSv4.1/pnfs Ensure flexfiles reports all connection related errors") Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/flexfilelayout/flexfilelayout.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c index 1ec79ccf89ad2..5c69a6e9ab3e1 100644 --- a/fs/nfs/flexfilelayout/flexfilelayout.c +++ b/fs/nfs/flexfilelayout/flexfilelayout.c @@ -1235,6 +1235,7 @@ static void ff_layout_io_track_ds_error(struct pnfs_layout_segment *lseg, case -EPFNOSUPPORT: case -EPROTONOSUPPORT: case -EOPNOTSUPP: + case -EINVAL: case -ECONNREFUSED: case -ECONNRESET: case -EHOSTDOWN:
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust trond.myklebust@hammerspace.com
[ Upstream commit 611fa42dfa9d2f3918ac5f4dd5705dfad81b323d ]
If the server rejects the credential as being stale, or bad, then we should mark it for revalidation before retransmitting.
Fixes: 7f5667a5f8c4 ("SUNRPC: Clean up rpc_verify_header()") Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/clnt.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index b0258507b236c..ff6728e41e044 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -2736,6 +2736,7 @@ rpc_decode_header(struct rpc_task *task, struct xdr_stream *xdr) case rpc_autherr_rejectedverf: case rpcsec_gsserr_credproblem: case rpcsec_gsserr_ctxproblem: + rpcauth_invalcred(task); if (!task->tk_cred_retry) break; task->tk_cred_retry--;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Olga Kornievskaia kolga@netapp.com
[ Upstream commit 51d674a5e4889f1c8e223ac131cf218e1631e423 ]
After receiving the location(s) of the DS server(s) in the GETDEVINCEINFO, create the request for the clientid to such server and indicate that the client is connecting to a DS.
Signed-off-by: Olga Kornievskaia kolga@netapp.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Stable-dep-of: 806a3bc421a1 ("NFSv4.1: fix pnfs MDS=DS session trunking") Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/nfs4client.c | 3 +++ fs/nfs/nfs4proc.c | 4 ++++ 2 files changed, 7 insertions(+)
diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c index d3051b051a564..d3e2b0867dc11 100644 --- a/fs/nfs/nfs4client.c +++ b/fs/nfs/nfs4client.c @@ -231,6 +231,8 @@ struct nfs_client *nfs4_alloc_client(const struct nfs_client_initdata *cl_init) __set_bit(NFS_CS_DISCRTRY, &clp->cl_flags); __set_bit(NFS_CS_NO_RETRANS_TIMEOUT, &clp->cl_flags);
+ if (test_bit(NFS_CS_DS, &cl_init->init_flags)) + __set_bit(NFS_CS_DS, &clp->cl_flags); /* * Set up the connection to the server before we add add to the * global list. @@ -993,6 +995,7 @@ struct nfs_client *nfs4_set_ds_client(struct nfs_server *mds_srv, if (mds_srv->flags & NFS_MOUNT_NORESVPORT) __set_bit(NFS_CS_NORESVPORT, &cl_init.init_flags);
+ __set_bit(NFS_CS_DS, &cl_init.init_flags); /* * Set an authflavor equual to the MDS value. Use the MDS nfs_client * cl_ipaddr so as to use the same EXCHANGE_ID co_ownerid as the MDS diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 2dec0fed1ba16..acb1346da13e9 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -8794,6 +8794,8 @@ nfs4_run_exchange_id(struct nfs_client *clp, const struct cred *cred, #ifdef CONFIG_NFS_V4_1_MIGRATION calldata->args.flags |= EXCHGID4_FLAG_SUPP_MOVED_MIGR; #endif + if (test_bit(NFS_CS_DS, &clp->cl_flags)) + calldata->args.flags |= EXCHGID4_FLAG_USE_PNFS_DS; msg.rpc_argp = &calldata->args; msg.rpc_resp = &calldata->res; task_setup_data.callback_data = calldata; @@ -8871,6 +8873,8 @@ static int _nfs4_proc_exchange_id(struct nfs_client *clp, const struct cred *cre /* Save the EXCHANGE_ID verifier session trunk tests */ memcpy(clp->cl_confirm.data, argp->verifier.data, sizeof(clp->cl_confirm.data)); + if (resp->flags & EXCHGID4_FLAG_USE_PNFS_DS) + set_bit(NFS_CS_DS, &clp->cl_flags); out: trace_nfs4_exchange_id(clp, status); rpc_put_task(task);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Olga Kornievskaia kolga@netapp.com
[ Upstream commit 806a3bc421a115fbb287c1efce63a48c54ee804b ]
Currently, when GETDEVICEINFO returns multiple locations where each is a different IP but the server's identity is same as MDS, then nfs4_set_ds_client() finds the existing nfs_client structure which has the MDS's max_connect value (and if it's 1), then the 1st IP on the DS's list will get dropped due to MDS trunking rules. Other IPs would be added as they fall under the pnfs trunking rules.
For the list of IPs the 1st goes thru calling nfs4_set_ds_client() which will eventually call nfs4_add_trunk() and call into rpc_clnt_test_and_add_xprt() which has the check for MDS trunking. The other IPs (after the 1st one), would call rpc_clnt_add_xprt() which doesn't go thru that check.
nfs4_add_trunk() is called when MDS trunking is happening and it needs to enforce the usage of max_connect mount option of the 1st mount. However, this shouldn't be applied to pnfs flow.
Instead, this patch proposed to treat MDS=DS as DS trunking and make sure that MDS's max_connect limit does not apply to the 1st IP returned in the GETDEVICEINFO list. It does so by marking the newly created client with a new flag NFS_CS_PNFS which then used to pass max_connect value to use into the rpc_clnt_test_and_add_xprt() instead of the existing rpc client's max_connect value set by the MDS connection.
For example, mount was done without max_connect value set so MDS's rpc client has cl_max_connect=1. Upon calling into rpc_clnt_test_and_add_xprt() and using rpc client's value, the caller passes in max_connect value which is previously been set in the pnfs path (as a part of handling GETDEVICEINFO list of IPs) in nfs4_set_ds_client().
However, when NFS_CS_PNFS flag is not set and we know we are doing MDS trunking, comparing a new IP of the same server, we then set the max_connect value to the existing MDS's value and pass that into rpc_clnt_test_and_add_xprt().
Fixes: dc48e0abee24 ("SUNRPC enforce creation of no more than max_connect xprts") Signed-off-by: Olga Kornievskaia kolga@netapp.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/nfs4client.c | 6 +++++- include/linux/nfs_fs_sb.h | 1 + net/sunrpc/clnt.c | 11 +++++++---- 3 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c index d3e2b0867dc11..84b345efcec00 100644 --- a/fs/nfs/nfs4client.c +++ b/fs/nfs/nfs4client.c @@ -416,6 +416,8 @@ static void nfs4_add_trunk(struct nfs_client *clp, struct nfs_client *old) .net = old->cl_net, .servername = old->cl_hostname, }; + int max_connect = test_bit(NFS_CS_PNFS, &clp->cl_flags) ? + clp->cl_max_connect : old->cl_max_connect;
if (clp->cl_proto != old->cl_proto) return; @@ -429,7 +431,7 @@ static void nfs4_add_trunk(struct nfs_client *clp, struct nfs_client *old) xprt_args.addrlen = clp_salen;
rpc_clnt_add_xprt(old->cl_rpcclient, &xprt_args, - rpc_clnt_test_and_add_xprt, NULL); + rpc_clnt_test_and_add_xprt, &max_connect); }
/** @@ -996,6 +998,8 @@ struct nfs_client *nfs4_set_ds_client(struct nfs_server *mds_srv, __set_bit(NFS_CS_NORESVPORT, &cl_init.init_flags);
__set_bit(NFS_CS_DS, &cl_init.init_flags); + __set_bit(NFS_CS_PNFS, &cl_init.init_flags); + cl_init.max_connect = NFS_MAX_TRANSPORTS; /* * Set an authflavor equual to the MDS value. Use the MDS nfs_client * cl_ipaddr so as to use the same EXCHANGE_ID co_ownerid as the MDS diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index ea2f7e6b1b0b5..ef8ba5fbc6503 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -48,6 +48,7 @@ struct nfs_client { #define NFS_CS_NOPING 6 /* - don't ping on connect */ #define NFS_CS_DS 7 /* - Server is a DS */ #define NFS_CS_REUSEPORT 8 /* - reuse src port on reconnect */ +#define NFS_CS_PNFS 9 /* - Server used for pnfs */ struct sockaddr_storage cl_addr; /* server identifier */ size_t cl_addrlen; char * cl_hostname; /* hostname of server */ diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index ff6728e41e044..b3f6f67ed2521 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -2890,19 +2890,22 @@ static const struct rpc_call_ops rpc_cb_add_xprt_call_ops = { * @clnt: pointer to struct rpc_clnt * @xps: pointer to struct rpc_xprt_switch, * @xprt: pointer struct rpc_xprt - * @dummy: unused + * @in_max_connect: pointer to the max_connect value for the passed in xprt transport */ int rpc_clnt_test_and_add_xprt(struct rpc_clnt *clnt, struct rpc_xprt_switch *xps, struct rpc_xprt *xprt, - void *dummy) + void *in_max_connect) { struct rpc_cb_add_xprt_calldata *data; struct rpc_task *task; + int max_connect = clnt->cl_max_connect;
- if (xps->xps_nunique_destaddr_xprts + 1 > clnt->cl_max_connect) { + if (in_max_connect) + max_connect = *(int *)in_max_connect; + if (xps->xps_nunique_destaddr_xprts + 1 > max_connect) { rcu_read_lock(); pr_warn("SUNRPC: reached max allowed number (%d) did not add " - "transport to server: %s\n", clnt->cl_max_connect, + "transport to server: %s\n", max_connect, rpc_peeraddr2str(clnt, RPC_DISPLAY_ADDR)); rcu_read_unlock(); return -EINVAL;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sakari Ailus sakari.ailus@linux.intel.com
[ Upstream commit 86e16b87afac20779da1228d690a95c54d7e2ad0 ]
The Kconfig option that enables compiling camera sensor drivers is VIDEO_CAMERA_SENSOR rather than MEDIA_CAMERA_SUPPORT as it was previously. Fix this.
Also select VIDEO_OV7670 for marvell platform drivers only if MEDIA_SUBDRV_AUTOSELECT and VIDEO_CAMERA_SENSOR are enabled.
Reported-by: Randy Dunlap rdunlap@infradead.org Fixes: 7d3c7d2a2914 ("media: i2c: Add a camera sensor top level menu") Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/marvell/Kconfig | 4 ++-- drivers/media/usb/em28xx/Kconfig | 4 ++-- drivers/media/usb/go7007/Kconfig | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/media/platform/marvell/Kconfig b/drivers/media/platform/marvell/Kconfig index ec1a16734a280..d6499ffe30e8b 100644 --- a/drivers/media/platform/marvell/Kconfig +++ b/drivers/media/platform/marvell/Kconfig @@ -7,7 +7,7 @@ config VIDEO_CAFE_CCIC depends on V4L_PLATFORM_DRIVERS depends on PCI && I2C && VIDEO_DEV depends on COMMON_CLK - select VIDEO_OV7670 + select VIDEO_OV7670 if MEDIA_SUBDRV_AUTOSELECT && VIDEO_CAMERA_SENSOR select VIDEOBUF2_VMALLOC select VIDEOBUF2_DMA_CONTIG select VIDEOBUF2_DMA_SG @@ -22,7 +22,7 @@ config VIDEO_MMP_CAMERA depends on I2C && VIDEO_DEV depends on ARCH_MMP || COMPILE_TEST depends on COMMON_CLK - select VIDEO_OV7670 + select VIDEO_OV7670 if MEDIA_SUBDRV_AUTOSELECT && VIDEO_CAMERA_SENSOR select I2C_GPIO select VIDEOBUF2_VMALLOC select VIDEOBUF2_DMA_CONTIG diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig index b3c472b8c5a96..cb61fd6cc6c61 100644 --- a/drivers/media/usb/em28xx/Kconfig +++ b/drivers/media/usb/em28xx/Kconfig @@ -12,8 +12,8 @@ config VIDEO_EM28XX_V4L2 select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT select VIDEO_TVP5150 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT - select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT - select VIDEO_OV2640 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT + select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT && VIDEO_CAMERA_SENSOR + select VIDEO_OV2640 if MEDIA_SUBDRV_AUTOSELECT && VIDEO_CAMERA_SENSOR help This is a video4linux driver for Empia 28xx based TV cards.
diff --git a/drivers/media/usb/go7007/Kconfig b/drivers/media/usb/go7007/Kconfig index 4ff79940ad8d4..b2a15d9fb1f33 100644 --- a/drivers/media/usb/go7007/Kconfig +++ b/drivers/media/usb/go7007/Kconfig @@ -12,8 +12,8 @@ config VIDEO_GO7007 select VIDEO_TW2804 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_TW9903 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT - select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT && VIDEO_CAMERA_SENSOR help This is a video4linux driver for the WIS GO7007 MPEG encoder chip.
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sakari Ailus sakari.ailus@linux.intel.com
[ Upstream commit 41425941dfcf47cc6df8e500af6ff16a7be6539f ]
The via camera controller driver selected ov7670 driver, however now that driver has dependencies and may no longer be selected unconditionally.
Reported-by: Randy Dunlap rdunlap@infradead.org Fixes: 7d3c7d2a2914 ("media: i2c: Add a camera sensor top level menu") Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Acked-by: Randy Dunlap rdunlap@infradead.org Tested-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/via/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/via/Kconfig b/drivers/media/platform/via/Kconfig index 8926eb0803b27..6e603c0382487 100644 --- a/drivers/media/platform/via/Kconfig +++ b/drivers/media/platform/via/Kconfig @@ -7,7 +7,7 @@ config VIDEO_VIA_CAMERA depends on V4L_PLATFORM_DRIVERS depends on FB_VIA && VIDEO_DEV select VIDEOBUF2_DMA_SG - select VIDEO_OV7670 + select VIDEO_OV7670 if VIDEO_CAMERA_SENSOR help Driver support for the integrated camera controller in VIA Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Wysochanski dwysocha@redhat.com
[ Upstream commit df1c357f25d808e30b216188330e708e09e1a412 ]
If a network filesystem using netfs implements a clamp_length() function, it can set subrequest lengths smaller than a page size.
When we loop through the folios in netfs_rreq_unlock_folios() to set any folios to be written back, we need to make sure we only call folio_start_fscache() once for each folio.
Otherwise, this simple testcase:
mount -o fsc,rsize=1024,wsize=1024 127.0.0.1:/export /mnt/nfs dd if=/dev/zero of=/mnt/nfs/file.bin bs=4096 count=1 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.0126359 s, 324 kB/s echo 3 > /proc/sys/vm/drop_caches cat /mnt/nfs/file.bin > /dev/null
will trigger an oops similar to the following:
page dumped because: VM_BUG_ON_FOLIO(folio_test_private_2(folio)) ------------[ cut here ]------------ kernel BUG at include/linux/netfs.h:44! ... CPU: 5 PID: 134 Comm: kworker/u16:5 Kdump: loaded Not tainted 6.4.0-rc5 ... RIP: 0010:netfs_rreq_unlock_folios+0x68e/0x730 [netfs] ... Call Trace: netfs_rreq_assess+0x497/0x660 [netfs] netfs_subreq_terminated+0x32b/0x610 [netfs] nfs_netfs_read_completion+0x14e/0x1a0 [nfs] nfs_read_completion+0x2f9/0x330 [nfs] rpc_free_task+0x72/0xa0 [sunrpc] rpc_async_release+0x46/0x70 [sunrpc] process_one_work+0x3bd/0x710 worker_thread+0x89/0x610 kthread+0x181/0x1c0 ret_from_fork+0x29/0x50
Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers" Link: https://bugzilla.redhat.com/show_bug.cgi?id=2210612 Signed-off-by: Dave Wysochanski dwysocha@redhat.com Reviewed-by: Jeff Layton jlayton@kernel.org Signed-off-by: David Howells dhowells@redhat.com Link: https://lore.kernel.org/r/20230608214137.856006-1-dwysocha@redhat.com/ # v1 Link: https://lore.kernel.org/r/20230915185704.1082982-1-dwysocha@redhat.com/ # v2 Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/netfs/buffered_read.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/fs/netfs/buffered_read.c b/fs/netfs/buffered_read.c index 7679a68e81930..caa0a053e8a9d 100644 --- a/fs/netfs/buffered_read.c +++ b/fs/netfs/buffered_read.c @@ -47,12 +47,14 @@ void netfs_rreq_unlock_folios(struct netfs_io_request *rreq) xas_for_each(&xas, folio, last_page) { loff_t pg_end; bool pg_failed = false; + bool folio_started;
if (xas_retry(&xas, folio)) continue;
pg_end = folio_pos(folio) + folio_size(folio) - 1;
+ folio_started = false; for (;;) { loff_t sreq_end;
@@ -60,8 +62,10 @@ void netfs_rreq_unlock_folios(struct netfs_io_request *rreq) pg_failed = true; break; } - if (test_bit(NETFS_SREQ_COPY_TO_CACHE, &subreq->flags)) + if (!folio_started && test_bit(NETFS_SREQ_COPY_TO_CACHE, &subreq->flags)) { folio_start_fscache(folio); + folio_started = true; + } pg_failed |= subreq_failed; sreq_end = subreq->start + subreq->len - 1; if (pg_end < sreq_end)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Namhyung Kim namhyung@kernel.org
[ Upstream commit 7822a8913f4c51c7d1aff793b525d60c3384fb5b ]
The bison and flex generate C files from the source (.y and .l) files. When O= option is used, they are saved in a separate directory but the default build rule assumes the .C files are in the source directory. So it might read invalid file if there are generated files from an old version. The same is true for the pmu-events files.
For example, the following command would cause a build failure:
$ git checkout v6.3 $ make -C tools/perf # build in the same directory
$ git checkout v6.5-rc2 $ mkdir build # create a build directory $ make -C tools/perf O=build # build in a different directory but it # refers files in the source directory
Let's update the build rule to specify those cases explicitly to depend on the files in the output directory.
Note that it's not a complete fix and it needs the next patch for the include path too.
Fixes: 80eeb67fe577aa76 ("perf jevents: Program to convert JSON file") Signed-off-by: Namhyung Kim namhyung@kernel.org Cc: Adrian Hunter adrian.hunter@intel.com Cc: Andi Kleen ak@linux.intel.com Cc: Anup Sharma anupnewsmail@gmail.com Cc: Ian Rogers irogers@google.com Cc: Ingo Molnar mingo@kernel.org Cc: Jiri Olsa jolsa@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230728022447.1323563-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/build/Makefile.build | 10 ++++++++++ tools/perf/pmu-events/Build | 6 ++++++ 2 files changed, 16 insertions(+)
diff --git a/tools/build/Makefile.build b/tools/build/Makefile.build index 715092fc6a239..0f0aba16bdee7 100644 --- a/tools/build/Makefile.build +++ b/tools/build/Makefile.build @@ -116,6 +116,16 @@ $(OUTPUT)%.s: %.c FORCE $(call rule_mkdir) $(call if_changed_dep,cc_s_c)
+# bison and flex files are generated in the OUTPUT directory +# so it needs a separate rule to depend on them properly +$(OUTPUT)%-bison.o: $(OUTPUT)%-bison.c FORCE + $(call rule_mkdir) + $(call if_changed_dep,$(host)cc_o_c) + +$(OUTPUT)%-flex.o: $(OUTPUT)%-flex.c FORCE + $(call rule_mkdir) + $(call if_changed_dep,$(host)cc_o_c) + # Gather build data: # obj-y - list of build objects # subdir-y - list of directories to nest diff --git a/tools/perf/pmu-events/Build b/tools/perf/pmu-events/Build index 04ef95174660b..fcb61b94f1306 100644 --- a/tools/perf/pmu-events/Build +++ b/tools/perf/pmu-events/Build @@ -25,3 +25,9 @@ $(OUTPUT)pmu-events/pmu-events.c: $(JSON) $(JSON_TEST) $(JEVENTS_PY) $(call rule_mkdir) $(Q)$(call echo-cmd,gen)$(PYTHON) $(JEVENTS_PY) $(JEVENTS_ARCH) pmu-events/arch $@ endif + +# pmu-events.c file is generated in the OUTPUT directory so it needs a +# separate rule to depend on it properly +$(OUTPUT)pmu-events/pmu-events.o: $(PMU_EVENTS_C) + $(call rule_mkdir) + $(call if_changed_dep,cc_o_c)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka mpatocka@redhat.com
[ Upstream commit f6007dce0cd35d634d9be91ef3515a6385dcee16 ]
There's a race condition in the multipath target when retrieve_deps races with multipath_message calling dm_get_device and dm_put_device. retrieve_deps walks the list of open devices without holding any lock but multipath may add or remove devices to the list while it is running. The end result may be memory corruption or use-after-free memory access.
See this description of a UAF with multipath_message(): https://listman.redhat.com/archives/dm-devel/2022-October/052373.html
Fix this bug by introducing a new rw semaphore "devices_lock". We grab devices_lock for read in retrieve_deps and we grab it for write in dm_get_device and dm_put_device.
Reported-by: Luo Meng luomeng12@huawei.com Signed-off-by: Mikulas Patocka mpatocka@redhat.com Cc: stable@vger.kernel.org Tested-by: Li Lingfeng lilingfeng3@huawei.com Signed-off-by: Mike Snitzer snitzer@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-core.h | 1 + drivers/md/dm-ioctl.c | 7 ++++++- drivers/md/dm-table.c | 32 ++++++++++++++++++++++++-------- 3 files changed, 31 insertions(+), 9 deletions(-)
diff --git a/drivers/md/dm-core.h b/drivers/md/dm-core.h index 28c641352de9b..71dcd8fd4050a 100644 --- a/drivers/md/dm-core.h +++ b/drivers/md/dm-core.h @@ -214,6 +214,7 @@ struct dm_table {
/* a list of devices used by this table */ struct list_head devices; + struct rw_semaphore devices_lock;
/* events get handed up using this callback */ void (*event_fn)(void *); diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index 2afd2d2a0f407..206e6ce554dc7 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -1566,6 +1566,8 @@ static void retrieve_deps(struct dm_table *table, struct dm_dev_internal *dd; struct dm_target_deps *deps;
+ down_read(&table->devices_lock); + deps = get_result_buffer(param, param_size, &len);
/* @@ -1580,7 +1582,7 @@ static void retrieve_deps(struct dm_table *table, needed = struct_size(deps, dev, count); if (len < needed) { param->flags |= DM_BUFFER_FULL_FLAG; - return; + goto out; }
/* @@ -1592,6 +1594,9 @@ static void retrieve_deps(struct dm_table *table, deps->dev[count++] = huge_encode_dev(dd->dm_dev->bdev->bd_dev);
param->data_size = param->data_start + needed; + +out: + up_read(&table->devices_lock); }
static int table_deps(struct file *filp, struct dm_ioctl *param, size_t param_size) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 288f600ee56dc..dac6a5f25f2be 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -134,6 +134,7 @@ int dm_table_create(struct dm_table **result, fmode_t mode, return -ENOMEM;
INIT_LIST_HEAD(&t->devices); + init_rwsem(&t->devices_lock);
if (!num_targets) num_targets = KEYS_PER_NODE; @@ -362,15 +363,19 @@ int dm_get_device(struct dm_target *ti, const char *path, fmode_t mode, return -ENODEV; }
+ down_write(&t->devices_lock); + dd = find_device(&t->devices, dev); if (!dd) { dd = kmalloc(sizeof(*dd), GFP_KERNEL); - if (!dd) - return -ENOMEM; + if (!dd) { + r = -ENOMEM; + goto unlock_ret_r; + }
if ((r = dm_get_table_device(t->md, dev, mode, &dd->dm_dev))) { kfree(dd); - return r; + goto unlock_ret_r; }
refcount_set(&dd->count, 1); @@ -380,12 +385,17 @@ int dm_get_device(struct dm_target *ti, const char *path, fmode_t mode, } else if (dd->dm_dev->mode != (mode | dd->dm_dev->mode)) { r = upgrade_mode(dd, mode, t->md); if (r) - return r; + goto unlock_ret_r; } refcount_inc(&dd->count); out: + up_write(&t->devices_lock); *result = dd->dm_dev; return 0; + +unlock_ret_r: + up_write(&t->devices_lock); + return r; } EXPORT_SYMBOL(dm_get_device);
@@ -421,9 +431,12 @@ static int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev, void dm_put_device(struct dm_target *ti, struct dm_dev *d) { int found = 0; - struct list_head *devices = &ti->table->devices; + struct dm_table *t = ti->table; + struct list_head *devices = &t->devices; struct dm_dev_internal *dd;
+ down_write(&t->devices_lock); + list_for_each_entry(dd, devices, list) { if (dd->dm_dev == d) { found = 1; @@ -432,14 +445,17 @@ void dm_put_device(struct dm_target *ti, struct dm_dev *d) } if (!found) { DMERR("%s: device %s not in table devices list", - dm_device_name(ti->table->md), d->name); - return; + dm_device_name(t->md), d->name); + goto unlock_ret; } if (refcount_dec_and_test(&dd->count)) { - dm_put_table_device(ti->table->md, d); + dm_put_table_device(t->md, d); list_del(&dd->list); kfree(dd); } + +unlock_ret: + up_write(&t->devices_lock); } EXPORT_SYMBOL(dm_put_device);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana fdmanana@suse.com
[ Upstream commit 91bfe3104b8db0310f76f2dcb6aacef24c889366 ]
If we fail to add a delayed dir index item because there's already another item with the same index number, we print an error message (and then BUG). However that message isn't very helpful to debug anything because we don't know what's the index number and what are the values of index counters in the inode and its delayed inode (index_cnt fields of struct btrfs_inode and struct btrfs_delayed_node).
So update the error message to include the index number and counters.
We actually had a recent case where this issue was hit by a syzbot report (see the link below).
Link: https://lore.kernel.org/linux-btrfs/00000000000036e1290603e097e0@google.com/ Reviewed-by: Qu Wenruo wqu@suse.com Signed-off-by: Filipe Manana fdmanana@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Stable-dep-of: 2c58c3931ede ("btrfs: remove BUG() after failure to insert delayed dir index item") Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/delayed-inode.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index d2cbb7733c7d6..34e843460e4db 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -1506,9 +1506,10 @@ int btrfs_insert_delayed_dir_index(struct btrfs_trans_handle *trans, ret = __btrfs_add_delayed_item(delayed_node, delayed_item); if (unlikely(ret)) { btrfs_err(trans->fs_info, - "err add delayed dir index item(name: %.*s) into the insertion tree of the delayed node(root id: %llu, inode id: %llu, errno: %d)", - name_len, name, delayed_node->root->root_key.objectid, - delayed_node->inode_id, ret); +"error adding delayed dir index item, name: %.*s, index: %llu, root: %llu, dir: %llu, dir->index_cnt: %llu, delayed_node->index_cnt: %llu, error: %d", + name_len, name, index, btrfs_root_id(delayed_node->root), + delayed_node->inode_id, dir->index_cnt, + delayed_node->index_cnt, ret); BUG(); } mutex_unlock(&delayed_node->mutex);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana fdmanana@suse.com
[ Upstream commit 2c58c3931ede7cd08cbecf1f1a4acaf0a04a41a9 ]
Instead of calling BUG() when we fail to insert a delayed dir index item into the delayed node's tree, we can just release all the resources we have allocated/acquired before and return the error to the caller. This is fine because all existing call chains undo anything they have done before calling btrfs_insert_delayed_dir_index() or BUG_ON (when creating pending snapshots in the transaction commit path).
So remove the BUG() call and do proper error handling.
This relates to a syzbot report linked below, but does not fix it because it only prevents hitting a BUG(), it does not fix the issue where somehow we attempt to use twice the same index number for different index items.
Link: https://lore.kernel.org/linux-btrfs/00000000000036e1290603e097e0@google.com/ CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo wqu@suse.com Signed-off-by: Filipe Manana fdmanana@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/delayed-inode.c | 74 +++++++++++++++++++++++++--------------- 1 file changed, 47 insertions(+), 27 deletions(-)
diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index 34e843460e4db..9dacf72a75d0e 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -1421,7 +1421,29 @@ void btrfs_balance_delayed_items(struct btrfs_fs_info *fs_info) btrfs_wq_run_delayed_node(delayed_root, fs_info, BTRFS_DELAYED_BATCH); }
-/* Will return 0 or -ENOMEM */ +static void btrfs_release_dir_index_item_space(struct btrfs_trans_handle *trans) +{ + struct btrfs_fs_info *fs_info = trans->fs_info; + const u64 bytes = btrfs_calc_insert_metadata_size(fs_info, 1); + + if (test_bit(BTRFS_FS_LOG_RECOVERING, &fs_info->flags)) + return; + + /* + * Adding the new dir index item does not require touching another + * leaf, so we can release 1 unit of metadata that was previously + * reserved when starting the transaction. This applies only to + * the case where we had a transaction start and excludes the + * transaction join case (when replaying log trees). + */ + trace_btrfs_space_reservation(fs_info, "transaction", + trans->transid, bytes, 0); + btrfs_block_rsv_release(fs_info, trans->block_rsv, bytes, NULL); + ASSERT(trans->bytes_reserved >= bytes); + trans->bytes_reserved -= bytes; +} + +/* Will return 0, -ENOMEM or -EEXIST (index number collision, unexpected). */ int btrfs_insert_delayed_dir_index(struct btrfs_trans_handle *trans, const char *name, int name_len, struct btrfs_inode *dir, @@ -1463,6 +1485,27 @@ int btrfs_insert_delayed_dir_index(struct btrfs_trans_handle *trans,
mutex_lock(&delayed_node->mutex);
+ /* + * First attempt to insert the delayed item. This is to make the error + * handling path simpler in case we fail (-EEXIST). There's no risk of + * any other task coming in and running the delayed item before we do + * the metadata space reservation below, because we are holding the + * delayed node's mutex and that mutex must also be locked before the + * node's delayed items can be run. + */ + ret = __btrfs_add_delayed_item(delayed_node, delayed_item); + if (unlikely(ret)) { + btrfs_err(trans->fs_info, +"error adding delayed dir index item, name: %.*s, index: %llu, root: %llu, dir: %llu, dir->index_cnt: %llu, delayed_node->index_cnt: %llu, error: %d", + name_len, name, index, btrfs_root_id(delayed_node->root), + delayed_node->inode_id, dir->index_cnt, + delayed_node->index_cnt, ret); + btrfs_release_delayed_item(delayed_item); + btrfs_release_dir_index_item_space(trans); + mutex_unlock(&delayed_node->mutex); + goto release_node; + } + if (delayed_node->index_item_leaves == 0 || delayed_node->curr_index_batch_size + data_len > leaf_data_size) { delayed_node->curr_index_batch_size = data_len; @@ -1480,37 +1523,14 @@ int btrfs_insert_delayed_dir_index(struct btrfs_trans_handle *trans, * impossible. */ if (WARN_ON(ret)) { - mutex_unlock(&delayed_node->mutex); btrfs_release_delayed_item(delayed_item); + mutex_unlock(&delayed_node->mutex); goto release_node; }
delayed_node->index_item_leaves++; - } else if (!test_bit(BTRFS_FS_LOG_RECOVERING, &fs_info->flags)) { - const u64 bytes = btrfs_calc_insert_metadata_size(fs_info, 1); - - /* - * Adding the new dir index item does not require touching another - * leaf, so we can release 1 unit of metadata that was previously - * reserved when starting the transaction. This applies only to - * the case where we had a transaction start and excludes the - * transaction join case (when replaying log trees). - */ - trace_btrfs_space_reservation(fs_info, "transaction", - trans->transid, bytes, 0); - btrfs_block_rsv_release(fs_info, trans->block_rsv, bytes, NULL); - ASSERT(trans->bytes_reserved >= bytes); - trans->bytes_reserved -= bytes; - } - - ret = __btrfs_add_delayed_item(delayed_node, delayed_item); - if (unlikely(ret)) { - btrfs_err(trans->fs_info, -"error adding delayed dir index item, name: %.*s, index: %llu, root: %llu, dir: %llu, dir->index_cnt: %llu, delayed_node->index_cnt: %llu, error: %d", - name_len, name, index, btrfs_root_id(delayed_node->root), - delayed_node->inode_id, dir->index_cnt, - delayed_node->index_cnt, ret); - BUG(); + } else { + btrfs_release_dir_index_item_space(trans); } mutex_unlock(&delayed_node->mutex);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kemeng Shi shikemeng@huaweicloud.com
[ Upstream commit de8bf0e5ee7482585450357c6d4eddec8efc5cb7 ]
Replace the traditional ternary conditional operator with with max()/min()
Signed-off-by: Kemeng Shi shikemeng@huaweicloud.com Reviewed-by: Ritesh Harjani (IBM) ritesh.list@gmail.com Link: https://lore.kernel.org/r/20230801143204.2284343-7-shikemeng@huaweicloud.com Signed-off-by: Theodore Ts'o tytso@mit.edu Stable-dep-of: 45e4ab320c9b ("ext4: move setting of trimmed bit into ext4_try_to_trim_range()") Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/mballoc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 016925b1a0908..a2c5024943d82 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -6430,8 +6430,7 @@ __releases(ext4_group_lock_ptr(sb, e4b->bd_group)) void *bitmap;
bitmap = e4b->bd_bitmap; - start = (e4b->bd_info->bb_first_free > start) ? - e4b->bd_info->bb_first_free : start; + start = max(e4b->bd_info->bb_first_free, start); count = 0; free_count = 0;
@@ -6648,8 +6647,7 @@ ext4_mballoc_query_range(
ext4_lock_group(sb, group);
- start = (e4b.bd_info->bb_first_free > start) ? - e4b.bd_info->bb_first_free : start; + start = max(e4b.bd_info->bb_first_free, start); if (end >= EXT4_CLUSTERS_PER_GROUP(sb)) end = EXT4_CLUSTERS_PER_GROUP(sb) - 1;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara jack@suse.cz
[ Upstream commit 45e4ab320c9b5fa67b1fc3b6a9b381cfcc0c8488 ]
Currently we set the group's trimmed bit in ext4_trim_all_free() based on return value of ext4_try_to_trim_range(). However when we will want to abort trimming because of suspend attempt, we want to return success from ext4_try_to_trim_range() but not set the trimmed bit. Instead implementing awkward propagation of this information, just move setting of trimmed bit into ext4_try_to_trim_range() when the whole group is trimmed.
Cc: stable@kernel.org Signed-off-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20230913150504.9054-1-jack@suse.cz Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/mballoc.c | 46 +++++++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 21 deletions(-)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index a2c5024943d82..41f0385f85d38 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -6420,6 +6420,16 @@ __acquires(bitlock) return ret; }
+static ext4_grpblk_t ext4_last_grp_cluster(struct super_block *sb, + ext4_group_t grp) +{ + if (grp < ext4_get_groups_count(sb)) + return EXT4_CLUSTERS_PER_GROUP(sb) - 1; + return (ext4_blocks_count(EXT4_SB(sb)->s_es) - + ext4_group_first_block_no(sb, grp) - 1) >> + EXT4_CLUSTER_BITS(sb); +} + static int ext4_try_to_trim_range(struct super_block *sb, struct ext4_buddy *e4b, ext4_grpblk_t start, ext4_grpblk_t max, ext4_grpblk_t minblocks) @@ -6427,9 +6437,12 @@ __acquires(ext4_group_lock_ptr(sb, e4b->bd_group)) __releases(ext4_group_lock_ptr(sb, e4b->bd_group)) { ext4_grpblk_t next, count, free_count; + bool set_trimmed = false; void *bitmap;
bitmap = e4b->bd_bitmap; + if (start == 0 && max >= ext4_last_grp_cluster(sb, e4b->bd_group)) + set_trimmed = true; start = max(e4b->bd_info->bb_first_free, start); count = 0; free_count = 0; @@ -6444,16 +6457,14 @@ __releases(ext4_group_lock_ptr(sb, e4b->bd_group)) int ret = ext4_trim_extent(sb, start, next - start, e4b);
if (ret && ret != -EOPNOTSUPP) - break; + return count; count += next - start; } free_count += next - start; start = next + 1;
- if (fatal_signal_pending(current)) { - count = -ERESTARTSYS; - break; - } + if (fatal_signal_pending(current)) + return -ERESTARTSYS;
if (need_resched()) { ext4_unlock_group(sb, e4b->bd_group); @@ -6465,6 +6476,9 @@ __releases(ext4_group_lock_ptr(sb, e4b->bd_group)) break; }
+ if (set_trimmed) + EXT4_MB_GRP_SET_TRIMMED(e4b->bd_info); + return count; }
@@ -6475,7 +6489,6 @@ __releases(ext4_group_lock_ptr(sb, e4b->bd_group)) * @start: first group block to examine * @max: last group block to examine * @minblocks: minimum extent block count - * @set_trimmed: set the trimmed flag if at least one block is trimmed * * ext4_trim_all_free walks through group's block bitmap searching for free * extents. When the free extent is found, mark it as used in group buddy @@ -6485,7 +6498,7 @@ __releases(ext4_group_lock_ptr(sb, e4b->bd_group)) static ext4_grpblk_t ext4_trim_all_free(struct super_block *sb, ext4_group_t group, ext4_grpblk_t start, ext4_grpblk_t max, - ext4_grpblk_t minblocks, bool set_trimmed) + ext4_grpblk_t minblocks) { struct ext4_buddy e4b; int ret; @@ -6502,13 +6515,10 @@ ext4_trim_all_free(struct super_block *sb, ext4_group_t group, ext4_lock_group(sb, group);
if (!EXT4_MB_GRP_WAS_TRIMMED(e4b.bd_info) || - minblocks < EXT4_SB(sb)->s_last_trim_minblks) { + minblocks < EXT4_SB(sb)->s_last_trim_minblks) ret = ext4_try_to_trim_range(sb, &e4b, start, max, minblocks); - if (ret >= 0 && set_trimmed) - EXT4_MB_GRP_SET_TRIMMED(e4b.bd_info); - } else { + else ret = 0; - }
ext4_unlock_group(sb, group); ext4_mb_unload_buddy(&e4b); @@ -6541,7 +6551,6 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range) ext4_fsblk_t first_data_blk = le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block); ext4_fsblk_t max_blks = ext4_blocks_count(EXT4_SB(sb)->s_es); - bool whole_group, eof = false; int ret = 0;
start = range->start >> sb->s_blocksize_bits; @@ -6560,10 +6569,8 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range) if (minlen > EXT4_CLUSTERS_PER_GROUP(sb)) goto out; } - if (end >= max_blks - 1) { + if (end >= max_blks - 1) end = max_blks - 1; - eof = true; - } if (end <= first_data_blk) goto out; if (start < first_data_blk) @@ -6577,7 +6584,6 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
/* end now represents the last cluster to discard in this group */ end = EXT4_CLUSTERS_PER_GROUP(sb) - 1; - whole_group = true;
for (group = first_group; group <= last_group; group++) { grp = ext4_get_group_info(sb, group); @@ -6596,13 +6602,11 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range) * change it for the last group, note that last_cluster is * already computed earlier by ext4_get_group_no_and_offset() */ - if (group == last_group) { + if (group == last_group) end = last_cluster; - whole_group = eof ? true : end == EXT4_CLUSTERS_PER_GROUP(sb) - 1; - } if (grp->bb_free >= minlen) { cnt = ext4_trim_all_free(sb, group, first_cluster, - end, minlen, whole_group); + end, minlen); if (cnt < 0) { ret = cnt; break;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara jack@suse.cz
[ Upstream commit 5229a658f6453362fbb9da6bf96872ef25a7097e ]
Len Brown has reported that system suspend sometimes fail due to inability to freeze a task working in ext4_trim_fs() for one minute. Trimming a large filesystem on a disk that slowly processes discard requests can indeed take a long time. Since discard is just an advisory call, it is perfectly fine to interrupt it at any time and the return number of discarded blocks until that moment. Do that when we detect the task is being frozen.
Cc: stable@kernel.org Reported-by: Len Brown lenb@kernel.org Suggested-by: Dave Chinner david@fromorbit.com References: https://bugzilla.kernel.org/show_bug.cgi?id=216322 Signed-off-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20230913150504.9054-2-jack@suse.cz Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/mballoc.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 41f0385f85d38..3c8300e08f412 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -16,6 +16,7 @@ #include <linux/slab.h> #include <linux/nospec.h> #include <linux/backing-dev.h> +#include <linux/freezer.h> #include <trace/events/ext4.h>
/* @@ -6430,6 +6431,11 @@ static ext4_grpblk_t ext4_last_grp_cluster(struct super_block *sb, EXT4_CLUSTER_BITS(sb); }
+static bool ext4_trim_interrupted(void) +{ + return fatal_signal_pending(current) || freezing(current); +} + static int ext4_try_to_trim_range(struct super_block *sb, struct ext4_buddy *e4b, ext4_grpblk_t start, ext4_grpblk_t max, ext4_grpblk_t minblocks) @@ -6463,8 +6469,8 @@ __releases(ext4_group_lock_ptr(sb, e4b->bd_group)) free_count += next - start; start = next + 1;
- if (fatal_signal_pending(current)) - return -ERESTARTSYS; + if (ext4_trim_interrupted()) + return count;
if (need_resched()) { ext4_unlock_group(sb, e4b->bd_group); @@ -6586,6 +6592,8 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range) end = EXT4_CLUSTERS_PER_GROUP(sb) - 1;
for (group = first_group; group <= last_group; group++) { + if (ext4_trim_interrupted()) + break; grp = ext4_get_group_info(sb, group); if (!grp) continue;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal fw@strlen.de
commit 24138933b97b055d486e8064b4a1721702442a9b upstream.
There is an asymmetry between commit/abort and preparation phase if the following conditions are met:
1. set is a verdict map ("1.2.3.4 : jump foo") 2. timeouts are enabled
In this case, following sequence is problematic:
1. element E in set S refers to chain C 2. userspace requests removal of set S 3. kernel does a set walk to decrement chain->use count for all elements from preparation phase 4. kernel does another set walk to remove elements from the commit phase (or another walk to do a chain->use increment for all elements from abort phase)
If E has already expired in 1), it will be ignored during list walk, so its use count won't have been changed.
Then, when set is culled, ->destroy callback will zap the element via nf_tables_set_elem_destroy(), but this function is only safe for elements that have been deactivated earlier from the preparation phase: lack of earlier deactivate removes the element but leaks the chain use count, which results in a WARN splat when the chain gets removed later, plus a leak of the nft_chain structure.
Update pipapo_get() not to skip expired elements, otherwise flush command reports bogus ENOENT errors.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support") Fixes: 9d0982927e79 ("netfilter: nft_hash: add support for timeouts") Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 4 ++++ net/netfilter/nft_set_hash.c | 2 -- net/netfilter/nft_set_pipapo.c | 18 ++++++++++++------ net/netfilter/nft_set_rbtree.c | 2 -- 4 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 3c5cac9bd9b70..475c556f49912 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -5386,8 +5386,12 @@ static int nf_tables_dump_setelem(const struct nft_ctx *ctx, const struct nft_set_iter *iter, struct nft_set_elem *elem) { + const struct nft_set_ext *ext = nft_set_elem_ext(set, elem->priv); struct nft_set_dump_args *args;
+ if (nft_set_elem_expired(ext)) + return 0; + args = container_of(iter, struct nft_set_dump_args, iter); return nf_tables_fill_setelem(args->skb, set, elem); } diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index 0b73cb0e752f7..24caa31fa2310 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -278,8 +278,6 @@ static void nft_rhash_walk(const struct nft_ctx *ctx, struct nft_set *set,
if (iter->count < iter->skip) goto cont; - if (nft_set_elem_expired(&he->ext)) - goto cont; if (!nft_set_elem_active(&he->ext, iter->genmask)) goto cont;
diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c index 8c16681884b7e..b6a994ba72f31 100644 --- a/net/netfilter/nft_set_pipapo.c +++ b/net/netfilter/nft_set_pipapo.c @@ -566,8 +566,7 @@ static struct nft_pipapo_elem *pipapo_get(const struct net *net, goto out;
if (last) { - if (nft_set_elem_expired(&f->mt[b].e->ext) || - (genmask && + if ((genmask && !nft_set_elem_active(&f->mt[b].e->ext, genmask))) goto next_match;
@@ -601,8 +600,17 @@ static struct nft_pipapo_elem *pipapo_get(const struct net *net, static void *nft_pipapo_get(const struct net *net, const struct nft_set *set, const struct nft_set_elem *elem, unsigned int flags) { - return pipapo_get(net, set, (const u8 *)elem->key.val.data, - nft_genmask_cur(net)); + struct nft_pipapo_elem *ret; + + ret = pipapo_get(net, set, (const u8 *)elem->key.val.data, + nft_genmask_cur(net)); + if (IS_ERR(ret)) + return ret; + + if (nft_set_elem_expired(&ret->ext)) + return ERR_PTR(-ENOENT); + + return ret; }
/** @@ -2024,8 +2032,6 @@ static void nft_pipapo_walk(const struct nft_ctx *ctx, struct nft_set *set, goto cont;
e = f->mt[r].e; - if (nft_set_elem_expired(&e->ext)) - goto cont;
elem.priv = e;
diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index 8d73fffd2d09d..39956e5341c9e 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -552,8 +552,6 @@ static void nft_rbtree_walk(const struct nft_ctx *ctx,
if (iter->count < iter->skip) goto cont; - if (nft_set_elem_expired(&rbe->ext)) - goto cont; if (!nft_set_elem_active(&rbe->ext, iter->genmask)) goto cont;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
commit 5f68718b34a531a556f2f50300ead2862278da26 upstream.
The set types rhashtable and rbtree use a GC worker to reclaim memory.
From system work queue, in periodic intervals, a scan of the table is
done.
The major caveat here is that the nft transaction mutex is not held. This causes a race between control plane and GC when they attempt to delete the same element.
We cannot grab the netlink mutex from the work queue, because the control plane has to wait for the GC work queue in case the set is to be removed, so we get following deadlock:
cpu 1 cpu2 GC work transaction comes in , lock nft mutex `acquire nft mutex // BLOCKS transaction asks to remove the set set destruction calls cancel_work_sync()
cancel_work_sync will now block forever, because it is waiting for the mutex the caller already owns.
This patch adds a new API that deals with garbage collection in two steps:
1) Lockless GC of expired elements sets on the NFT_SET_ELEM_DEAD_BIT so they are not visible via lookup. Annotate current GC sequence in the GC transaction. Enqueue GC transaction work as soon as it is full. If ruleset is updated, then GC transaction is aborted and retried later.
2) GC work grabs the mutex. If GC sequence has changed then this GC transaction lost race with control plane, abort it as it contains stale references to objects and let GC try again later. If the ruleset is intact, then this GC transaction deactivates and removes the elements and it uses call_rcu() to destroy elements.
Note that no elements are removed from GC lockless path, the _DEAD bit is set and pointers are collected. GC catchall does not remove the elements anymore too. There is a new set->dead flag that is set on to abort the GC transaction to deal with set->ops->destroy() path which removes the remaining elements in the set from commit_release, where no mutex is held.
To deal with GC when mutex is held, which allows safe deactivate and removal, add sync GC API which releases the set element object via call_rcu(). This is used by rbtree and pipapo backends which also perform garbage collection from control plane path.
Since element removal from sets can happen from control plane and element garbage collection/timeout, it is necessary to keep the set structure alive until all elements have been deactivated and destroyed.
We cannot do a cancel_work_sync or flush_work in nft_set_destroy because its called with the transaction mutex held, but the aforementioned async work queue might be blocked on the very mutex that nft_set_destroy() callchain is sitting on.
This gives us the choice of ABBA deadlock or UaF.
To avoid both, add set->refs refcount_t member. The GC API can then increment the set refcount and release it once the elements have been free'd.
Set backends are adapted to use the GC transaction API in a follow up patch entitled:
("netfilter: nf_tables: use gc transaction API in set backends")
This is joint work with Florian Westphal.
Fixes: cfed7e1b1f8e ("netfilter: nf_tables: add set garbage collection helpers") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/netfilter/nf_tables.h | 64 +++++++- net/netfilter/nf_tables_api.c | 248 ++++++++++++++++++++++++++++-- 2 files changed, 300 insertions(+), 12 deletions(-)
diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index c752b6f509791..3b76370683c82 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -507,6 +507,7 @@ struct nft_set_elem_expr { * * @list: table set list node * @bindings: list of set bindings + * @refs: internal refcounting for async set destruction * @table: table this set belongs to * @net: netnamespace this set belongs to * @name: name of the set @@ -536,6 +537,7 @@ struct nft_set_elem_expr { struct nft_set { struct list_head list; struct list_head bindings; + refcount_t refs; struct nft_table *table; possible_net_t net; char *name; @@ -557,7 +559,8 @@ struct nft_set { struct list_head pending_update; /* runtime data below here */ const struct nft_set_ops *ops ____cacheline_aligned; - u16 flags:14, + u16 flags:13, + dead:1, genmask:2; u8 klen; u8 dlen; @@ -1577,6 +1580,32 @@ static inline void nft_set_elem_clear_busy(struct nft_set_ext *ext) clear_bit(NFT_SET_ELEM_BUSY_BIT, word); }
+#define NFT_SET_ELEM_DEAD_MASK (1 << 3) + +#if defined(__LITTLE_ENDIAN_BITFIELD) +#define NFT_SET_ELEM_DEAD_BIT 3 +#elif defined(__BIG_ENDIAN_BITFIELD) +#define NFT_SET_ELEM_DEAD_BIT (BITS_PER_LONG - BITS_PER_BYTE + 3) +#else +#error +#endif + +static inline void nft_set_elem_dead(struct nft_set_ext *ext) +{ + unsigned long *word = (unsigned long *)ext; + + BUILD_BUG_ON(offsetof(struct nft_set_ext, genmask) != 0); + set_bit(NFT_SET_ELEM_DEAD_BIT, word); +} + +static inline int nft_set_elem_is_dead(const struct nft_set_ext *ext) +{ + unsigned long *word = (unsigned long *)ext; + + BUILD_BUG_ON(offsetof(struct nft_set_ext, genmask) != 0); + return test_bit(NFT_SET_ELEM_DEAD_BIT, word); +} + /** * struct nft_trans - nf_tables object update in transaction * @@ -1708,6 +1737,38 @@ struct nft_trans_flowtable { #define nft_trans_flowtable_flags(trans) \ (((struct nft_trans_flowtable *)trans->data)->flags)
+#define NFT_TRANS_GC_BATCHCOUNT 256 + +struct nft_trans_gc { + struct list_head list; + struct net *net; + struct nft_set *set; + u32 seq; + u8 count; + void *priv[NFT_TRANS_GC_BATCHCOUNT]; + struct rcu_head rcu; +}; + +struct nft_trans_gc *nft_trans_gc_alloc(struct nft_set *set, + unsigned int gc_seq, gfp_t gfp); +void nft_trans_gc_destroy(struct nft_trans_gc *trans); + +struct nft_trans_gc *nft_trans_gc_queue_async(struct nft_trans_gc *gc, + unsigned int gc_seq, gfp_t gfp); +void nft_trans_gc_queue_async_done(struct nft_trans_gc *gc); + +struct nft_trans_gc *nft_trans_gc_queue_sync(struct nft_trans_gc *gc, gfp_t gfp); +void nft_trans_gc_queue_sync_done(struct nft_trans_gc *trans); + +void nft_trans_gc_elem_add(struct nft_trans_gc *gc, void *priv); + +struct nft_trans_gc *nft_trans_gc_catchall(struct nft_trans_gc *gc, + unsigned int gc_seq); + +void nft_setelem_data_deactivate(const struct net *net, + const struct nft_set *set, + struct nft_set_elem *elem); + int __init nft_chain_filter_init(void); void nft_chain_filter_fini(void);
@@ -1735,6 +1796,7 @@ struct nftables_pernet { u64 table_handle; unsigned int base_seq; u8 validate_state; + unsigned int gc_seq; };
extern unsigned int nf_tables_net_id; diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 475c556f49912..e8e18a54958f8 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -31,7 +31,9 @@ static LIST_HEAD(nf_tables_expressions); static LIST_HEAD(nf_tables_objects); static LIST_HEAD(nf_tables_flowtables); static LIST_HEAD(nf_tables_destroy_list); +static LIST_HEAD(nf_tables_gc_list); static DEFINE_SPINLOCK(nf_tables_destroy_list_lock); +static DEFINE_SPINLOCK(nf_tables_gc_list_lock);
enum { NFT_VALIDATE_SKIP = 0, @@ -122,6 +124,9 @@ static void nft_validate_state_update(struct net *net, u8 new_validate_state) static void nf_tables_trans_destroy_work(struct work_struct *w); static DECLARE_WORK(trans_destroy_work, nf_tables_trans_destroy_work);
+static void nft_trans_gc_work(struct work_struct *work); +static DECLARE_WORK(trans_gc_work, nft_trans_gc_work); + static void nft_ctx_init(struct nft_ctx *ctx, struct net *net, const struct sk_buff *skb, @@ -583,10 +588,6 @@ static int nft_trans_set_add(const struct nft_ctx *ctx, int msg_type, return __nft_trans_set_add(ctx, msg_type, set, NULL); }
-static void nft_setelem_data_deactivate(const struct net *net, - const struct nft_set *set, - struct nft_set_elem *elem); - static int nft_mapelem_deactivate(const struct nft_ctx *ctx, struct nft_set *set, const struct nft_set_iter *iter, @@ -4854,6 +4855,7 @@ static int nf_tables_newset(struct sk_buff *skb, const struct nfnl_info *info,
INIT_LIST_HEAD(&set->bindings); INIT_LIST_HEAD(&set->catchall_list); + refcount_set(&set->refs, 1); set->table = table; write_pnet(&set->net, net); set->ops = ops; @@ -4921,6 +4923,14 @@ static void nft_set_catchall_destroy(const struct nft_ctx *ctx, } }
+static void nft_set_put(struct nft_set *set) +{ + if (refcount_dec_and_test(&set->refs)) { + kfree(set->name); + kvfree(set); + } +} + static void nft_set_destroy(const struct nft_ctx *ctx, struct nft_set *set) { int i; @@ -4933,8 +4943,7 @@ static void nft_set_destroy(const struct nft_ctx *ctx, struct nft_set *set)
set->ops->destroy(ctx, set); nft_set_catchall_destroy(ctx, set); - kfree(set->name); - kvfree(set); + nft_set_put(set); }
static int nf_tables_delset(struct sk_buff *skb, const struct nfnl_info *info, @@ -6051,7 +6060,8 @@ struct nft_set_ext *nft_set_catchall_lookup(const struct net *net, list_for_each_entry_rcu(catchall, &set->catchall_list, list) { ext = nft_set_elem_ext(set, catchall->elem); if (nft_set_elem_active(ext, genmask) && - !nft_set_elem_expired(ext)) + !nft_set_elem_expired(ext) && + !nft_set_elem_is_dead(ext)) return ext; }
@@ -6704,9 +6714,9 @@ static void nft_setelem_data_activate(const struct net *net, nft_use_inc_restore(&(*nft_set_ext_obj(ext))->use); }
-static void nft_setelem_data_deactivate(const struct net *net, - const struct nft_set *set, - struct nft_set_elem *elem) +void nft_setelem_data_deactivate(const struct net *net, + const struct nft_set *set, + struct nft_set_elem *elem) { const struct nft_set_ext *ext = nft_set_elem_ext(set, elem->priv);
@@ -9093,6 +9103,207 @@ void nft_chain_del(struct nft_chain *chain) list_del_rcu(&chain->list); }
+static void nft_trans_gc_setelem_remove(struct nft_ctx *ctx, + struct nft_trans_gc *trans) +{ + void **priv = trans->priv; + unsigned int i; + + for (i = 0; i < trans->count; i++) { + struct nft_set_elem elem = { + .priv = priv[i], + }; + + nft_setelem_data_deactivate(ctx->net, trans->set, &elem); + nft_setelem_remove(ctx->net, trans->set, &elem); + } +} + +void nft_trans_gc_destroy(struct nft_trans_gc *trans) +{ + nft_set_put(trans->set); + put_net(trans->net); + kfree(trans); +} + +static void nft_trans_gc_trans_free(struct rcu_head *rcu) +{ + struct nft_set_elem elem = {}; + struct nft_trans_gc *trans; + struct nft_ctx ctx = {}; + unsigned int i; + + trans = container_of(rcu, struct nft_trans_gc, rcu); + ctx.net = read_pnet(&trans->set->net); + + for (i = 0; i < trans->count; i++) { + elem.priv = trans->priv[i]; + if (!nft_setelem_is_catchall(trans->set, &elem)) + atomic_dec(&trans->set->nelems); + + nf_tables_set_elem_destroy(&ctx, trans->set, elem.priv); + } + + nft_trans_gc_destroy(trans); +} + +static bool nft_trans_gc_work_done(struct nft_trans_gc *trans) +{ + struct nftables_pernet *nft_net; + struct nft_ctx ctx = {}; + + nft_net = nft_pernet(trans->net); + + mutex_lock(&nft_net->commit_mutex); + + /* Check for race with transaction, otherwise this batch refers to + * stale objects that might not be there anymore. Skip transaction if + * set has been destroyed from control plane transaction in case gc + * worker loses race. + */ + if (READ_ONCE(nft_net->gc_seq) != trans->seq || trans->set->dead) { + mutex_unlock(&nft_net->commit_mutex); + return false; + } + + ctx.net = trans->net; + ctx.table = trans->set->table; + + nft_trans_gc_setelem_remove(&ctx, trans); + mutex_unlock(&nft_net->commit_mutex); + + return true; +} + +static void nft_trans_gc_work(struct work_struct *work) +{ + struct nft_trans_gc *trans, *next; + LIST_HEAD(trans_gc_list); + + spin_lock(&nf_tables_destroy_list_lock); + list_splice_init(&nf_tables_gc_list, &trans_gc_list); + spin_unlock(&nf_tables_destroy_list_lock); + + list_for_each_entry_safe(trans, next, &trans_gc_list, list) { + list_del(&trans->list); + if (!nft_trans_gc_work_done(trans)) { + nft_trans_gc_destroy(trans); + continue; + } + call_rcu(&trans->rcu, nft_trans_gc_trans_free); + } +} + +struct nft_trans_gc *nft_trans_gc_alloc(struct nft_set *set, + unsigned int gc_seq, gfp_t gfp) +{ + struct net *net = read_pnet(&set->net); + struct nft_trans_gc *trans; + + trans = kzalloc(sizeof(*trans), gfp); + if (!trans) + return NULL; + + refcount_inc(&set->refs); + trans->set = set; + trans->net = get_net(net); + trans->seq = gc_seq; + + return trans; +} + +void nft_trans_gc_elem_add(struct nft_trans_gc *trans, void *priv) +{ + trans->priv[trans->count++] = priv; +} + +static void nft_trans_gc_queue_work(struct nft_trans_gc *trans) +{ + spin_lock(&nf_tables_gc_list_lock); + list_add_tail(&trans->list, &nf_tables_gc_list); + spin_unlock(&nf_tables_gc_list_lock); + + schedule_work(&trans_gc_work); +} + +static int nft_trans_gc_space(struct nft_trans_gc *trans) +{ + return NFT_TRANS_GC_BATCHCOUNT - trans->count; +} + +struct nft_trans_gc *nft_trans_gc_queue_async(struct nft_trans_gc *gc, + unsigned int gc_seq, gfp_t gfp) +{ + if (nft_trans_gc_space(gc)) + return gc; + + nft_trans_gc_queue_work(gc); + + return nft_trans_gc_alloc(gc->set, gc_seq, gfp); +} + +void nft_trans_gc_queue_async_done(struct nft_trans_gc *trans) +{ + if (trans->count == 0) { + nft_trans_gc_destroy(trans); + return; + } + + nft_trans_gc_queue_work(trans); +} + +struct nft_trans_gc *nft_trans_gc_queue_sync(struct nft_trans_gc *gc, gfp_t gfp) +{ + if (WARN_ON_ONCE(!lockdep_commit_lock_is_held(gc->net))) + return NULL; + + if (nft_trans_gc_space(gc)) + return gc; + + call_rcu(&gc->rcu, nft_trans_gc_trans_free); + + return nft_trans_gc_alloc(gc->set, 0, gfp); +} + +void nft_trans_gc_queue_sync_done(struct nft_trans_gc *trans) +{ + WARN_ON_ONCE(!lockdep_commit_lock_is_held(trans->net)); + + if (trans->count == 0) { + nft_trans_gc_destroy(trans); + return; + } + + call_rcu(&trans->rcu, nft_trans_gc_trans_free); +} + +struct nft_trans_gc *nft_trans_gc_catchall(struct nft_trans_gc *gc, + unsigned int gc_seq) +{ + struct nft_set_elem_catchall *catchall; + const struct nft_set *set = gc->set; + struct nft_set_ext *ext; + + list_for_each_entry_rcu(catchall, &set->catchall_list, list) { + ext = nft_set_elem_ext(set, catchall->elem); + + if (!nft_set_elem_expired(ext)) + continue; + if (nft_set_elem_is_dead(ext)) + goto dead_elem; + + nft_set_elem_dead(ext); +dead_elem: + gc = nft_trans_gc_queue_async(gc, gc_seq, GFP_ATOMIC); + if (!gc) + return NULL; + + nft_trans_gc_elem_add(gc, catchall->elem); + } + + return gc; +} + static void nf_tables_module_autoload_cleanup(struct net *net) { struct nftables_pernet *nft_net = nft_pernet(net); @@ -9255,11 +9466,11 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb) { struct nftables_pernet *nft_net = nft_pernet(net); struct nft_trans *trans, *next; + unsigned int base_seq, gc_seq; LIST_HEAD(set_update_list); struct nft_trans_elem *te; struct nft_chain *chain; struct nft_table *table; - unsigned int base_seq; LIST_HEAD(adl); int err;
@@ -9336,6 +9547,10 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb)
WRITE_ONCE(nft_net->base_seq, base_seq);
+ /* Bump gc counter, it becomes odd, this is the busy mark. */ + gc_seq = READ_ONCE(nft_net->gc_seq); + WRITE_ONCE(nft_net->gc_seq, ++gc_seq); + /* step 3. Start new generation, rules_gen_X now in use. */ net->nft.gencursor = nft_gencursor_next(net);
@@ -9424,6 +9639,7 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb) nft_trans_destroy(trans); break; case NFT_MSG_DELSET: + nft_trans_set(trans)->dead = 1; list_del_rcu(&nft_trans_set(trans)->list); nf_tables_set_notify(&trans->ctx, nft_trans_set(trans), NFT_MSG_DELSET, GFP_KERNEL); @@ -9523,6 +9739,8 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb) nft_commit_notify(net, NETLINK_CB(skb).portid); nf_tables_gen_notify(net, skb, NFT_MSG_NEWGEN); nf_tables_commit_audit_log(&adl, nft_net->base_seq); + + WRITE_ONCE(nft_net->gc_seq, ++gc_seq); nf_tables_commit_release(net);
return 0; @@ -10555,6 +10773,7 @@ static int __net_init nf_tables_init_net(struct net *net) mutex_init(&nft_net->commit_mutex); nft_net->base_seq = 1; nft_net->validate_state = NFT_VALIDATE_SKIP; + nft_net->gc_seq = 0;
return 0; } @@ -10583,10 +10802,16 @@ static void __net_exit nf_tables_exit_net(struct net *net) WARN_ON_ONCE(!list_empty(&nft_net->notify_list)); }
+static void nf_tables_exit_batch(struct list_head *net_exit_list) +{ + flush_work(&trans_gc_work); +} + static struct pernet_operations nf_tables_net_ops = { .init = nf_tables_init_net, .pre_exit = nf_tables_pre_exit_net, .exit = nf_tables_exit_net, + .exit_batch = nf_tables_exit_batch, .id = &nf_tables_net_id, .size = sizeof(struct nftables_pernet), }; @@ -10658,6 +10883,7 @@ static void __exit nf_tables_module_exit(void) nft_chain_filter_fini(); nft_chain_route_fini(); unregister_pernet_subsys(&nf_tables_net_ops); + cancel_work_sync(&trans_gc_work); cancel_work_sync(&trans_destroy_work); rcu_barrier(); rhltable_destroy(&nft_objname_ht);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
commit f6c383b8c31a93752a52697f8430a71dcbc46adf upstream.
Use the GC transaction API to replace the old and buggy gc API and the busy mark approach.
No set elements are removed from async garbage collection anymore, instead the _DEAD bit is set on so the set element is not visible from lookup path anymore. Async GC enqueues transaction work that might be aborted and retried later.
rbtree and pipapo set backends does not set on the _DEAD bit from the sync GC path since this runs in control plane path where mutex is held. In this case, set elements are deactivated, removed and then released via RCU callback, sync GC never fails.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support") Fixes: 9d0982927e79 ("netfilter: nft_hash: add support for timeouts") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 7 +- net/netfilter/nft_set_hash.c | 77 +++++++++++------- net/netfilter/nft_set_pipapo.c | 48 ++++++++--- net/netfilter/nft_set_rbtree.c | 144 ++++++++++++++++++++------------- 4 files changed, 173 insertions(+), 103 deletions(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index e8e18a54958f8..e179d1132f2fb 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -6153,7 +6153,6 @@ static void nft_setelem_activate(struct net *net, struct nft_set *set,
if (nft_setelem_is_catchall(set, elem)) { nft_set_elem_change_active(net, set, ext); - nft_set_elem_clear_busy(ext); } else { set->ops->activate(net, set, elem); } @@ -6168,8 +6167,7 @@ static int nft_setelem_catchall_deactivate(const struct net *net,
list_for_each_entry(catchall, &set->catchall_list, list) { ext = nft_set_elem_ext(set, catchall->elem); - if (!nft_is_active(net, ext) || - nft_set_elem_mark_busy(ext)) + if (!nft_is_active(net, ext)) continue;
kfree(elem->priv); @@ -6880,8 +6878,7 @@ static int nft_set_catchall_flush(const struct nft_ctx *ctx,
list_for_each_entry_rcu(catchall, &set->catchall_list, list) { ext = nft_set_elem_ext(set, catchall->elem); - if (!nft_set_elem_active(ext, genmask) || - nft_set_elem_mark_busy(ext)) + if (!nft_set_elem_active(ext, genmask)) continue;
elem.priv = catchall->elem; diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index 24caa31fa2310..2f067e4596b02 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -59,6 +59,8 @@ static inline int nft_rhash_cmp(struct rhashtable_compare_arg *arg,
if (memcmp(nft_set_ext_key(&he->ext), x->key, x->set->klen)) return 1; + if (nft_set_elem_is_dead(&he->ext)) + return 1; if (nft_set_elem_expired(&he->ext)) return 1; if (!nft_set_elem_active(&he->ext, x->genmask)) @@ -188,7 +190,6 @@ static void nft_rhash_activate(const struct net *net, const struct nft_set *set, struct nft_rhash_elem *he = elem->priv;
nft_set_elem_change_active(net, set, &he->ext); - nft_set_elem_clear_busy(&he->ext); }
static bool nft_rhash_flush(const struct net *net, @@ -196,12 +197,9 @@ static bool nft_rhash_flush(const struct net *net, { struct nft_rhash_elem *he = priv;
- if (!nft_set_elem_mark_busy(&he->ext) || - !nft_is_active(net, &he->ext)) { - nft_set_elem_change_active(net, set, &he->ext); - return true; - } - return false; + nft_set_elem_change_active(net, set, &he->ext); + + return true; }
static void *nft_rhash_deactivate(const struct net *net, @@ -218,9 +216,8 @@ static void *nft_rhash_deactivate(const struct net *net,
rcu_read_lock(); he = rhashtable_lookup(&priv->ht, &arg, nft_rhash_params); - if (he != NULL && - !nft_rhash_flush(net, set, he)) - he = NULL; + if (he) + nft_set_elem_change_active(net, set, &he->ext);
rcu_read_unlock();
@@ -312,25 +309,48 @@ static bool nft_rhash_expr_needs_gc_run(const struct nft_set *set,
static void nft_rhash_gc(struct work_struct *work) { + struct nftables_pernet *nft_net; struct nft_set *set; struct nft_rhash_elem *he; struct nft_rhash *priv; - struct nft_set_gc_batch *gcb = NULL; struct rhashtable_iter hti; + struct nft_trans_gc *gc; + struct net *net; + u32 gc_seq;
priv = container_of(work, struct nft_rhash, gc_work.work); set = nft_set_container_of(priv); + net = read_pnet(&set->net); + nft_net = nft_pernet(net); + gc_seq = READ_ONCE(nft_net->gc_seq); + + gc = nft_trans_gc_alloc(set, gc_seq, GFP_KERNEL); + if (!gc) + goto done;
rhashtable_walk_enter(&priv->ht, &hti); rhashtable_walk_start(&hti);
while ((he = rhashtable_walk_next(&hti))) { if (IS_ERR(he)) { - if (PTR_ERR(he) != -EAGAIN) - break; + if (PTR_ERR(he) != -EAGAIN) { + nft_trans_gc_destroy(gc); + gc = NULL; + goto try_later; + } continue; }
+ /* Ruleset has been updated, try later. */ + if (READ_ONCE(nft_net->gc_seq) != gc_seq) { + nft_trans_gc_destroy(gc); + gc = NULL; + goto try_later; + } + + if (nft_set_elem_is_dead(&he->ext)) + goto dead_elem; + if (nft_set_ext_exists(&he->ext, NFT_SET_EXT_EXPRESSIONS) && nft_rhash_expr_needs_gc_run(set, &he->ext)) goto needs_gc_run; @@ -338,26 +358,26 @@ static void nft_rhash_gc(struct work_struct *work) if (!nft_set_elem_expired(&he->ext)) continue; needs_gc_run: - if (nft_set_elem_mark_busy(&he->ext)) - continue; + nft_set_elem_dead(&he->ext); +dead_elem: + gc = nft_trans_gc_queue_async(gc, gc_seq, GFP_ATOMIC); + if (!gc) + goto try_later;
- gcb = nft_set_gc_batch_check(set, gcb, GFP_ATOMIC); - if (gcb == NULL) - break; - rhashtable_remove_fast(&priv->ht, &he->node, nft_rhash_params); - atomic_dec(&set->nelems); - nft_set_gc_batch_add(gcb, he); + nft_trans_gc_elem_add(gc, he); } + + gc = nft_trans_gc_catchall(gc, gc_seq); + +try_later: + /* catchall list iteration requires rcu read side lock. */ rhashtable_walk_stop(&hti); rhashtable_walk_exit(&hti);
- he = nft_set_catchall_gc(set); - if (he) { - gcb = nft_set_gc_batch_check(set, gcb, GFP_ATOMIC); - if (gcb) - nft_set_gc_batch_add(gcb, he); - } - nft_set_gc_batch_complete(gcb); + if (gc) + nft_trans_gc_queue_async_done(gc); + +done: queue_delayed_work(system_power_efficient_wq, &priv->gc_work, nft_set_gc_interval(set)); } @@ -420,7 +440,6 @@ static void nft_rhash_destroy(const struct nft_ctx *ctx, };
cancel_delayed_work_sync(&priv->gc_work); - rcu_barrier(); rhashtable_free_and_destroy(&priv->ht, nft_rhash_elem_destroy, (void *)&rhash_ctx); } diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c index b6a994ba72f31..a307a227d28db 100644 --- a/net/netfilter/nft_set_pipapo.c +++ b/net/netfilter/nft_set_pipapo.c @@ -1544,16 +1544,34 @@ static void pipapo_drop(struct nft_pipapo_match *m, } }
+static void nft_pipapo_gc_deactivate(struct net *net, struct nft_set *set, + struct nft_pipapo_elem *e) + +{ + struct nft_set_elem elem = { + .priv = e, + }; + + nft_setelem_data_deactivate(net, set, &elem); +} + /** * pipapo_gc() - Drop expired entries from set, destroy start and end elements * @set: nftables API set representation * @m: Matching data */ -static void pipapo_gc(const struct nft_set *set, struct nft_pipapo_match *m) +static void pipapo_gc(const struct nft_set *_set, struct nft_pipapo_match *m) { + struct nft_set *set = (struct nft_set *) _set; struct nft_pipapo *priv = nft_set_priv(set); + struct net *net = read_pnet(&set->net); int rules_f0, first_rule = 0; struct nft_pipapo_elem *e; + struct nft_trans_gc *gc; + + gc = nft_trans_gc_alloc(set, 0, GFP_KERNEL); + if (!gc) + return;
while ((rules_f0 = pipapo_rules_same_key(m->f, first_rule))) { union nft_pipapo_map_bucket rulemap[NFT_PIPAPO_MAX_FIELDS]; @@ -1577,13 +1595,20 @@ static void pipapo_gc(const struct nft_set *set, struct nft_pipapo_match *m) f--; i--; e = f->mt[rulemap[i].to].e; - if (nft_set_elem_expired(&e->ext) && - !nft_set_elem_mark_busy(&e->ext)) { + + /* synchronous gc never fails, there is no need to set on + * NFT_SET_ELEM_DEAD_BIT. + */ + if (nft_set_elem_expired(&e->ext)) { priv->dirty = true; - pipapo_drop(m, rulemap);
- rcu_barrier(); - nft_set_elem_destroy(set, e, true); + gc = nft_trans_gc_queue_sync(gc, GFP_ATOMIC); + if (!gc) + break; + + nft_pipapo_gc_deactivate(net, set, e); + pipapo_drop(m, rulemap); + nft_trans_gc_elem_add(gc, e);
/* And check again current first rule, which is now the * first we haven't checked. @@ -1593,11 +1618,11 @@ static void pipapo_gc(const struct nft_set *set, struct nft_pipapo_match *m) } }
- e = nft_set_catchall_gc(set); - if (e) - nft_set_elem_destroy(set, e, true); - - priv->last_gc = jiffies; + gc = nft_trans_gc_catchall(gc, 0); + if (gc) { + nft_trans_gc_queue_sync_done(gc); + priv->last_gc = jiffies; + } }
/** @@ -1733,7 +1758,6 @@ static void nft_pipapo_activate(const struct net *net, return;
nft_set_elem_change_active(net, set, &e->ext); - nft_set_elem_clear_busy(&e->ext); }
/** diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index 39956e5341c9e..f9d4c8fcbbf82 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -46,6 +46,12 @@ static int nft_rbtree_cmp(const struct nft_set *set, set->klen); }
+static bool nft_rbtree_elem_expired(const struct nft_rbtree_elem *rbe) +{ + return nft_set_elem_expired(&rbe->ext) || + nft_set_elem_is_dead(&rbe->ext); +} + static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set, const u32 *key, const struct nft_set_ext **ext, unsigned int seq) @@ -80,7 +86,7 @@ static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set continue; }
- if (nft_set_elem_expired(&rbe->ext)) + if (nft_rbtree_elem_expired(rbe)) return false;
if (nft_rbtree_interval_end(rbe)) { @@ -98,7 +104,7 @@ static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set
if (set->flags & NFT_SET_INTERVAL && interval != NULL && nft_set_elem_active(&interval->ext, genmask) && - !nft_set_elem_expired(&interval->ext) && + !nft_rbtree_elem_expired(interval) && nft_rbtree_interval_start(interval)) { *ext = &interval->ext; return true; @@ -215,6 +221,18 @@ static void *nft_rbtree_get(const struct net *net, const struct nft_set *set, return rbe; }
+static void nft_rbtree_gc_remove(struct net *net, struct nft_set *set, + struct nft_rbtree *priv, + struct nft_rbtree_elem *rbe) +{ + struct nft_set_elem elem = { + .priv = rbe, + }; + + nft_setelem_data_deactivate(net, set, &elem); + rb_erase(&rbe->node, &priv->root); +} + static int nft_rbtree_gc_elem(const struct nft_set *__set, struct nft_rbtree *priv, struct nft_rbtree_elem *rbe, @@ -222,11 +240,12 @@ static int nft_rbtree_gc_elem(const struct nft_set *__set, { struct nft_set *set = (struct nft_set *)__set; struct rb_node *prev = rb_prev(&rbe->node); + struct net *net = read_pnet(&set->net); struct nft_rbtree_elem *rbe_prev; - struct nft_set_gc_batch *gcb; + struct nft_trans_gc *gc;
- gcb = nft_set_gc_batch_check(set, NULL, GFP_ATOMIC); - if (!gcb) + gc = nft_trans_gc_alloc(set, 0, GFP_ATOMIC); + if (!gc) return -ENOMEM;
/* search for end interval coming before this element. @@ -244,17 +263,28 @@ static int nft_rbtree_gc_elem(const struct nft_set *__set,
if (prev) { rbe_prev = rb_entry(prev, struct nft_rbtree_elem, node); + nft_rbtree_gc_remove(net, set, priv, rbe_prev);
- rb_erase(&rbe_prev->node, &priv->root); - atomic_dec(&set->nelems); - nft_set_gc_batch_add(gcb, rbe_prev); + /* There is always room in this trans gc for this element, + * memory allocation never actually happens, hence, the warning + * splat in such case. No need to set NFT_SET_ELEM_DEAD_BIT, + * this is synchronous gc which never fails. + */ + gc = nft_trans_gc_queue_sync(gc, GFP_ATOMIC); + if (WARN_ON_ONCE(!gc)) + return -ENOMEM; + + nft_trans_gc_elem_add(gc, rbe_prev); }
- rb_erase(&rbe->node, &priv->root); - atomic_dec(&set->nelems); + nft_rbtree_gc_remove(net, set, priv, rbe); + gc = nft_trans_gc_queue_sync(gc, GFP_ATOMIC); + if (WARN_ON_ONCE(!gc)) + return -ENOMEM; + + nft_trans_gc_elem_add(gc, rbe);
- nft_set_gc_batch_add(gcb, rbe); - nft_set_gc_batch_complete(gcb); + nft_trans_gc_queue_sync_done(gc);
return 0; } @@ -482,7 +512,6 @@ static void nft_rbtree_activate(const struct net *net, struct nft_rbtree_elem *rbe = elem->priv;
nft_set_elem_change_active(net, set, &rbe->ext); - nft_set_elem_clear_busy(&rbe->ext); }
static bool nft_rbtree_flush(const struct net *net, @@ -490,12 +519,9 @@ static bool nft_rbtree_flush(const struct net *net, { struct nft_rbtree_elem *rbe = priv;
- if (!nft_set_elem_mark_busy(&rbe->ext) || - !nft_is_active(net, &rbe->ext)) { - nft_set_elem_change_active(net, set, &rbe->ext); - return true; - } - return false; + nft_set_elem_change_active(net, set, &rbe->ext); + + return true; }
static void *nft_rbtree_deactivate(const struct net *net, @@ -570,26 +596,40 @@ static void nft_rbtree_walk(const struct nft_ctx *ctx,
static void nft_rbtree_gc(struct work_struct *work) { - struct nft_rbtree_elem *rbe, *rbe_end = NULL, *rbe_prev = NULL; - struct nft_set_gc_batch *gcb = NULL; + struct nft_rbtree_elem *rbe, *rbe_end = NULL; + struct nftables_pernet *nft_net; struct nft_rbtree *priv; + struct nft_trans_gc *gc; struct rb_node *node; struct nft_set *set; + unsigned int gc_seq; struct net *net; - u8 genmask;
priv = container_of(work, struct nft_rbtree, gc_work.work); set = nft_set_container_of(priv); net = read_pnet(&set->net); - genmask = nft_genmask_cur(net); + nft_net = nft_pernet(net); + gc_seq = READ_ONCE(nft_net->gc_seq); + + gc = nft_trans_gc_alloc(set, gc_seq, GFP_KERNEL); + if (!gc) + goto done;
write_lock_bh(&priv->lock); write_seqcount_begin(&priv->count); for (node = rb_first(&priv->root); node != NULL; node = rb_next(node)) { + + /* Ruleset has been updated, try later. */ + if (READ_ONCE(nft_net->gc_seq) != gc_seq) { + nft_trans_gc_destroy(gc); + gc = NULL; + goto try_later; + } + rbe = rb_entry(node, struct nft_rbtree_elem, node);
- if (!nft_set_elem_active(&rbe->ext, genmask)) - continue; + if (nft_set_elem_is_dead(&rbe->ext)) + goto dead_elem;
/* elements are reversed in the rbtree for historical reasons, * from highest to lowest value, that is why end element is @@ -602,46 +642,36 @@ static void nft_rbtree_gc(struct work_struct *work) if (!nft_set_elem_expired(&rbe->ext)) continue;
- if (nft_set_elem_mark_busy(&rbe->ext)) { - rbe_end = NULL; + nft_set_elem_dead(&rbe->ext); + + if (!rbe_end) continue; - }
- if (rbe_prev) { - rb_erase(&rbe_prev->node, &priv->root); - rbe_prev = NULL; - } - gcb = nft_set_gc_batch_check(set, gcb, GFP_ATOMIC); - if (!gcb) - break; + nft_set_elem_dead(&rbe_end->ext);
- atomic_dec(&set->nelems); - nft_set_gc_batch_add(gcb, rbe); - rbe_prev = rbe; + gc = nft_trans_gc_queue_async(gc, gc_seq, GFP_ATOMIC); + if (!gc) + goto try_later;
- if (rbe_end) { - atomic_dec(&set->nelems); - nft_set_gc_batch_add(gcb, rbe_end); - rb_erase(&rbe_end->node, &priv->root); - rbe_end = NULL; - } - node = rb_next(node); - if (!node) - break; + nft_trans_gc_elem_add(gc, rbe_end); + rbe_end = NULL; +dead_elem: + gc = nft_trans_gc_queue_async(gc, gc_seq, GFP_ATOMIC); + if (!gc) + goto try_later; + + nft_trans_gc_elem_add(gc, rbe); } - if (rbe_prev) - rb_erase(&rbe_prev->node, &priv->root); + + gc = nft_trans_gc_catchall(gc, gc_seq); + +try_later: write_seqcount_end(&priv->count); write_unlock_bh(&priv->lock);
- rbe = nft_set_catchall_gc(set); - if (rbe) { - gcb = nft_set_gc_batch_check(set, gcb, GFP_ATOMIC); - if (gcb) - nft_set_gc_batch_add(gcb, rbe); - } - nft_set_gc_batch_complete(gcb); - + if (gc) + nft_trans_gc_queue_async_done(gc); +done: queue_delayed_work(system_power_efficient_wq, &priv->gc_work, nft_set_gc_interval(set)); }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
upstream c92db3030492b8ad1d0faace7a93bbcf53850d0c commit.
Set on the NFT_SET_ELEM_DEAD_BIT flag on this element, instead of performing element removal which might race with an ongoing transaction. Enable gc when dynamic flag is set on since dynset deletion requires garbage collection after this patch.
Fixes: d0a8d877da97 ("netfilter: nft_dynset: support for element deletion") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nft_set_hash.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index 2f067e4596b02..cef5df8460009 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -249,7 +249,9 @@ static bool nft_rhash_delete(const struct nft_set *set, if (he == NULL) return false;
- return rhashtable_remove_fast(&priv->ht, &he->node, nft_rhash_params) == 0; + nft_set_elem_dead(&he->ext); + + return true; }
static void nft_rhash_walk(const struct nft_ctx *ctx, struct nft_set *set, @@ -412,7 +414,7 @@ static int nft_rhash_init(const struct nft_set *set, return err;
INIT_DEFERRABLE_WORK(&priv->gc_work, nft_rhash_gc); - if (set->flags & NFT_SET_TIMEOUT) + if (set->flags & (NFT_SET_TIMEOUT | NFT_SET_EVAL)) nft_rhash_gc_init(set);
return 0;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
commit a2dd0233cbc4d8a0abb5f64487487ffc9265beb5 upstream.
Ditch it, it has been replace it by the GC transaction API and it has no clients anymore.
Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/netfilter/nf_tables.h | 98 +------------------------------ net/netfilter/nf_tables_api.c | 48 +-------------- 2 files changed, 4 insertions(+), 142 deletions(-)
diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 3b76370683c82..2d501dd901521 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -594,7 +594,6 @@ struct nft_set *nft_set_lookup_global(const struct net *net,
struct nft_set_ext *nft_set_catchall_lookup(const struct net *net, const struct nft_set *set); -void *nft_set_catchall_gc(const struct nft_set *set);
static inline unsigned long nft_set_gc_interval(const struct nft_set *set) { @@ -811,62 +810,6 @@ void nft_set_elem_destroy(const struct nft_set *set, void *elem, void nf_tables_set_elem_destroy(const struct nft_ctx *ctx, const struct nft_set *set, void *elem);
-/** - * struct nft_set_gc_batch_head - nf_tables set garbage collection batch - * - * @rcu: rcu head - * @set: set the elements belong to - * @cnt: count of elements - */ -struct nft_set_gc_batch_head { - struct rcu_head rcu; - const struct nft_set *set; - unsigned int cnt; -}; - -#define NFT_SET_GC_BATCH_SIZE ((PAGE_SIZE - \ - sizeof(struct nft_set_gc_batch_head)) / \ - sizeof(void *)) - -/** - * struct nft_set_gc_batch - nf_tables set garbage collection batch - * - * @head: GC batch head - * @elems: garbage collection elements - */ -struct nft_set_gc_batch { - struct nft_set_gc_batch_head head; - void *elems[NFT_SET_GC_BATCH_SIZE]; -}; - -struct nft_set_gc_batch *nft_set_gc_batch_alloc(const struct nft_set *set, - gfp_t gfp); -void nft_set_gc_batch_release(struct rcu_head *rcu); - -static inline void nft_set_gc_batch_complete(struct nft_set_gc_batch *gcb) -{ - if (gcb != NULL) - call_rcu(&gcb->head.rcu, nft_set_gc_batch_release); -} - -static inline struct nft_set_gc_batch * -nft_set_gc_batch_check(const struct nft_set *set, struct nft_set_gc_batch *gcb, - gfp_t gfp) -{ - if (gcb != NULL) { - if (gcb->head.cnt + 1 < ARRAY_SIZE(gcb->elems)) - return gcb; - nft_set_gc_batch_complete(gcb); - } - return nft_set_gc_batch_alloc(set, gfp); -} - -static inline void nft_set_gc_batch_add(struct nft_set_gc_batch *gcb, - void *elem) -{ - gcb->elems[gcb->head.cnt++] = elem; -} - struct nft_expr_ops; /** * struct nft_expr_type - nf_tables expression type @@ -1545,47 +1488,12 @@ static inline void nft_set_elem_change_active(const struct net *net,
#endif /* IS_ENABLED(CONFIG_NF_TABLES) */
-/* - * We use a free bit in the genmask field to indicate the element - * is busy, meaning it is currently being processed either by - * the netlink API or GC. - * - * Even though the genmask is only a single byte wide, this works - * because the extension structure if fully constant once initialized, - * so there are no non-atomic write accesses unless it is already - * marked busy. - */ -#define NFT_SET_ELEM_BUSY_MASK (1 << 2) - -#if defined(__LITTLE_ENDIAN_BITFIELD) -#define NFT_SET_ELEM_BUSY_BIT 2 -#elif defined(__BIG_ENDIAN_BITFIELD) -#define NFT_SET_ELEM_BUSY_BIT (BITS_PER_LONG - BITS_PER_BYTE + 2) -#else -#error -#endif - -static inline int nft_set_elem_mark_busy(struct nft_set_ext *ext) -{ - unsigned long *word = (unsigned long *)ext; - - BUILD_BUG_ON(offsetof(struct nft_set_ext, genmask) != 0); - return test_and_set_bit(NFT_SET_ELEM_BUSY_BIT, word); -} - -static inline void nft_set_elem_clear_busy(struct nft_set_ext *ext) -{ - unsigned long *word = (unsigned long *)ext; - - clear_bit(NFT_SET_ELEM_BUSY_BIT, word); -} - -#define NFT_SET_ELEM_DEAD_MASK (1 << 3) +#define NFT_SET_ELEM_DEAD_MASK (1 << 2)
#if defined(__LITTLE_ENDIAN_BITFIELD) -#define NFT_SET_ELEM_DEAD_BIT 3 +#define NFT_SET_ELEM_DEAD_BIT 2 #elif defined(__BIG_ENDIAN_BITFIELD) -#define NFT_SET_ELEM_DEAD_BIT (BITS_PER_LONG - BITS_PER_BYTE + 3) +#define NFT_SET_ELEM_DEAD_BIT (BITS_PER_LONG - BITS_PER_BYTE + 2) #else #error #endif diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index e179d1132f2fb..a38d87256b8fb 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -6069,29 +6069,6 @@ struct nft_set_ext *nft_set_catchall_lookup(const struct net *net, } EXPORT_SYMBOL_GPL(nft_set_catchall_lookup);
-void *nft_set_catchall_gc(const struct nft_set *set) -{ - struct nft_set_elem_catchall *catchall, *next; - struct nft_set_ext *ext; - void *elem = NULL; - - list_for_each_entry_safe(catchall, next, &set->catchall_list, list) { - ext = nft_set_elem_ext(set, catchall->elem); - - if (!nft_set_elem_expired(ext) || - nft_set_elem_mark_busy(ext)) - continue; - - elem = catchall->elem; - list_del_rcu(&catchall->list); - kfree_rcu(catchall, rcu); - break; - } - - return elem; -} -EXPORT_SYMBOL_GPL(nft_set_catchall_gc); - static int nft_setelem_catchall_insert(const struct net *net, struct nft_set *set, const struct nft_set_elem *elem, @@ -6562,7 +6539,7 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, goto err_elem_free; }
- ext->genmask = nft_genmask_cur(ctx->net) | NFT_SET_ELEM_BUSY_MASK; + ext->genmask = nft_genmask_cur(ctx->net);
err = nft_setelem_insert(ctx->net, set, &elem, &ext2, flags); if (err) { @@ -6949,29 +6926,6 @@ static int nf_tables_delsetelem(struct sk_buff *skb, return err; }
-void nft_set_gc_batch_release(struct rcu_head *rcu) -{ - struct nft_set_gc_batch *gcb; - unsigned int i; - - gcb = container_of(rcu, struct nft_set_gc_batch, head.rcu); - for (i = 0; i < gcb->head.cnt; i++) - nft_set_elem_destroy(gcb->head.set, gcb->elems[i], true); - kfree(gcb); -} - -struct nft_set_gc_batch *nft_set_gc_batch_alloc(const struct nft_set *set, - gfp_t gfp) -{ - struct nft_set_gc_batch *gcb; - - gcb = kzalloc(sizeof(*gcb), gfp); - if (gcb == NULL) - return gcb; - gcb->head.set = set; - return gcb; -} - /* * Stateful objects */
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal fw@strlen.de
commit 7845914f45f066497ac75b30c50dbc735e84e884 upstream.
nftables selftests fail: run-tests.sh testcases/sets/0044interval_overlap_0 Expected: 0-2 . 0-3, got: W: [FAILED] ./testcases/sets/0044interval_overlap_0: got 1
Insertion must ignore duplicate but expired entries.
Moreover, there is a strange asymmetry in nft_pipapo_activate:
It refetches the current element, whereas the other ->activate callbacks (bitmap, hash, rhash, rbtree) use elem->priv. Same for .remove: other set implementations take elem->priv, nft_pipapo_remove fetches elem->priv, then does a relookup, remove this.
I suspect this was the reason for the change that prompted the removal of the expired check in pipapo_get() in the first place, but skipping exired elements there makes no sense to me, this helper is used for normal get requests, insertions (duplicate check) and deactivate callback.
In first two cases expired elements must be skipped.
For ->deactivate(), this gets called for DELSETELEM, so it seems to me that expired elements should be skipped as well, i.e. delete request should fail with -ENOENT error.
Fixes: 24138933b97b ("netfilter: nf_tables: don't skip expired elements during walk") Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nft_set_pipapo.c | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-)
diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c index a307a227d28db..58bd514260b90 100644 --- a/net/netfilter/nft_set_pipapo.c +++ b/net/netfilter/nft_set_pipapo.c @@ -566,6 +566,8 @@ static struct nft_pipapo_elem *pipapo_get(const struct net *net, goto out;
if (last) { + if (nft_set_elem_expired(&f->mt[b].e->ext)) + goto next_match; if ((genmask && !nft_set_elem_active(&f->mt[b].e->ext, genmask))) goto next_match; @@ -600,17 +602,8 @@ static struct nft_pipapo_elem *pipapo_get(const struct net *net, static void *nft_pipapo_get(const struct net *net, const struct nft_set *set, const struct nft_set_elem *elem, unsigned int flags) { - struct nft_pipapo_elem *ret; - - ret = pipapo_get(net, set, (const u8 *)elem->key.val.data, + return pipapo_get(net, set, (const u8 *)elem->key.val.data, nft_genmask_cur(net)); - if (IS_ERR(ret)) - return ret; - - if (nft_set_elem_expired(&ret->ext)) - return ERR_PTR(-ENOENT); - - return ret; }
/** @@ -1751,11 +1744,7 @@ static void nft_pipapo_activate(const struct net *net, const struct nft_set *set, const struct nft_set_elem *elem) { - struct nft_pipapo_elem *e; - - e = pipapo_get(net, set, (const u8 *)elem->key.val.data, 0); - if (IS_ERR(e)) - return; + struct nft_pipapo_elem *e = elem->priv;
nft_set_elem_change_active(net, set, &e->ext); } @@ -1969,10 +1958,6 @@ static void nft_pipapo_remove(const struct net *net, const struct nft_set *set,
data = (const u8 *)nft_set_ext_key(&e->ext);
- e = pipapo_get(net, set, data, 0); - if (IS_ERR(e)) - return; - while ((rules_f0 = pipapo_rules_same_key(m->f, first_rule))) { union nft_pipapo_map_bucket rulemap[NFT_PIPAPO_MAX_FIELDS]; const u8 *match_start, *match_end;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
commit 6a33d8b73dfac0a41f3877894b38082bd0c9a5bc upstream.
Netlink event path is missing a synchronization point with GC transactions. Add GC sequence number update to netns release path and netlink event path, any GC transaction losing race will be discarded.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 36 +++++++++++++++++++++++++++++++---- 1 file changed, 32 insertions(+), 4 deletions(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index a38d87256b8fb..693dd05fdad6e 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -9413,6 +9413,22 @@ static void nft_set_commit_update(struct list_head *set_update_list) } }
+static unsigned int nft_gc_seq_begin(struct nftables_pernet *nft_net) +{ + unsigned int gc_seq; + + /* Bump gc counter, it becomes odd, this is the busy mark. */ + gc_seq = READ_ONCE(nft_net->gc_seq); + WRITE_ONCE(nft_net->gc_seq, ++gc_seq); + + return gc_seq; +} + +static void nft_gc_seq_end(struct nftables_pernet *nft_net, unsigned int gc_seq) +{ + WRITE_ONCE(nft_net->gc_seq, ++gc_seq); +} + static int nf_tables_commit(struct net *net, struct sk_buff *skb) { struct nftables_pernet *nft_net = nft_pernet(net); @@ -9498,9 +9514,7 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb)
WRITE_ONCE(nft_net->base_seq, base_seq);
- /* Bump gc counter, it becomes odd, this is the busy mark. */ - gc_seq = READ_ONCE(nft_net->gc_seq); - WRITE_ONCE(nft_net->gc_seq, ++gc_seq); + gc_seq = nft_gc_seq_begin(nft_net);
/* step 3. Start new generation, rules_gen_X now in use. */ net->nft.gencursor = nft_gencursor_next(net); @@ -9691,7 +9705,7 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb) nf_tables_gen_notify(net, skb, NFT_MSG_NEWGEN); nf_tables_commit_audit_log(&adl, nft_net->base_seq);
- WRITE_ONCE(nft_net->gc_seq, ++gc_seq); + nft_gc_seq_end(nft_net, gc_seq); nf_tables_commit_release(net);
return 0; @@ -10674,6 +10688,7 @@ static int nft_rcv_nl_event(struct notifier_block *this, unsigned long event, struct net *net = n->net; unsigned int deleted; bool restart = false; + unsigned int gc_seq;
if (event != NETLINK_URELEASE || n->protocol != NETLINK_NETFILTER) return NOTIFY_DONE; @@ -10681,6 +10696,9 @@ static int nft_rcv_nl_event(struct notifier_block *this, unsigned long event, nft_net = nft_pernet(net); deleted = 0; mutex_lock(&nft_net->commit_mutex); + + gc_seq = nft_gc_seq_begin(nft_net); + if (!list_empty(&nf_tables_destroy_list)) nf_tables_trans_destroy_flush_work(); again: @@ -10703,6 +10721,8 @@ static int nft_rcv_nl_event(struct notifier_block *this, unsigned long event, if (restart) goto again; } + nft_gc_seq_end(nft_net, gc_seq); + mutex_unlock(&nft_net->commit_mutex);
return NOTIFY_DONE; @@ -10741,12 +10761,20 @@ static void __net_exit nf_tables_pre_exit_net(struct net *net) static void __net_exit nf_tables_exit_net(struct net *net) { struct nftables_pernet *nft_net = nft_pernet(net); + unsigned int gc_seq;
mutex_lock(&nft_net->commit_mutex); + + gc_seq = nft_gc_seq_begin(nft_net); + if (!list_empty(&nft_net->commit_list) || !list_empty(&nft_net->module_list)) __nf_tables_abort(net, NFNL_ABORT_NONE); + __nft_release_tables(net); + + nft_gc_seq_end(nft_net, gc_seq); + mutex_unlock(&nft_net->commit_mutex); WARN_ON_ONCE(!list_empty(&nft_net->tables)); WARN_ON_ONCE(!list_empty(&nft_net->module_list));
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
commit 02c6c24402bf1c1e986899c14ba22a10b510916b upstream.
Use maybe_get_net() since GC workqueue might race with netns exit path.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 693dd05fdad6e..53ee6ac16f9e9 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -9155,9 +9155,14 @@ struct nft_trans_gc *nft_trans_gc_alloc(struct nft_set *set, if (!trans) return NULL;
+ trans->net = maybe_get_net(net); + if (!trans->net) { + kfree(trans); + return NULL; + } + refcount_inc(&set->refs); trans->set = set; - trans->net = get_net(net); trans->seq = gc_seq;
return trans;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
commit 720344340fb9be2765bbaab7b292ece0a4570eae upstream.
Abort path is missing a synchronization point with GC transactions. Add GC sequence number hence any GC transaction losing race will be discarded.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 53ee6ac16f9e9..0455af9a66af1 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -9969,7 +9969,12 @@ static int nf_tables_abort(struct net *net, struct sk_buff *skb, enum nfnl_abort_action action) { struct nftables_pernet *nft_net = nft_pernet(net); - int ret = __nf_tables_abort(net, action); + unsigned int gc_seq; + int ret; + + gc_seq = nft_gc_seq_begin(nft_net); + ret = __nf_tables_abort(net, action); + nft_gc_seq_end(nft_net, gc_seq);
mutex_unlock(&nft_net->commit_mutex);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
commit 8357bc946a2abc2a10ca40e5a2105d2b4c57515e upstream.
Use nf_tables_gc_list_lock spinlock, not nf_tables_destroy_list_lock to protect the gc_list.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 0455af9a66af1..47f3632c78bfb 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -9131,9 +9131,9 @@ static void nft_trans_gc_work(struct work_struct *work) struct nft_trans_gc *trans, *next; LIST_HEAD(trans_gc_list);
- spin_lock(&nf_tables_destroy_list_lock); + spin_lock(&nf_tables_gc_list_lock); list_splice_init(&nf_tables_gc_list, &trans_gc_list); - spin_unlock(&nf_tables_destroy_list_lock); + spin_unlock(&nf_tables_gc_list_lock);
list_for_each_entry_safe(trans, next, &trans_gc_list, list) { list_del(&trans->list);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal fw@strlen.de
commit 8e51830e29e12670b4c10df070a4ea4c9593e961 upstream.
Don't queue more gc work, else we may queue the same elements multiple times.
If an element is flagged as dead, this can mean that either the previous gc request was invalidated/discarded by a transaction or that the previous request is still pending in the system work queue.
The latter will happen if the gc interval is set to a very low value, e.g. 1ms, and system work queue is backlogged.
The sets refcount is 1 if no previous gc requeusts are queued, so add a helper for this and skip gc run if old requests are pending.
Add a helper for this and skip the gc run in this case.
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API") Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/netfilter/nf_tables.h | 5 +++++ net/netfilter/nft_set_hash.c | 3 +++ net/netfilter/nft_set_rbtree.c | 3 +++ 3 files changed, 11 insertions(+)
diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 2d501dd901521..12777a5b60cd0 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -581,6 +581,11 @@ static inline void *nft_set_priv(const struct nft_set *set) return (void *)set->data; }
+static inline bool nft_set_gc_is_pending(const struct nft_set *s) +{ + return refcount_read(&s->refs) != 1; +} + static inline struct nft_set *nft_set_container_of(const void *priv) { return (void *)priv - offsetof(struct nft_set, data); diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index cef5df8460009..524763659f251 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -326,6 +326,9 @@ static void nft_rhash_gc(struct work_struct *work) nft_net = nft_pernet(net); gc_seq = READ_ONCE(nft_net->gc_seq);
+ if (nft_set_gc_is_pending(set)) + goto done; + gc = nft_trans_gc_alloc(set, gc_seq, GFP_KERNEL); if (!gc) goto done; diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index f9d4c8fcbbf82..c6435e7092319 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -611,6 +611,9 @@ static void nft_rbtree_gc(struct work_struct *work) nft_net = nft_pernet(net); gc_seq = READ_ONCE(nft_net->gc_seq);
+ if (nft_set_gc_is_pending(set)) + goto done; + gc = nft_trans_gc_alloc(set, gc_seq, GFP_KERNEL); if (!gc) goto done;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
commit 2ee52ae94baabf7ee09cf2a8d854b990dac5d0e4 upstream.
New elements in this transaction might expired before such transaction ends. Skip sync GC for such elements otherwise commit path might walk over an already released object. Once transaction is finished, async GC will collect such expired element.
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nft_set_rbtree.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index c6435e7092319..f250b5399344a 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -312,6 +312,7 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set, struct nft_rbtree_elem *rbe, *rbe_le = NULL, *rbe_ge = NULL; struct rb_node *node, *next, *parent, **p, *first = NULL; struct nft_rbtree *priv = nft_set_priv(set); + u8 cur_genmask = nft_genmask_cur(net); u8 genmask = nft_genmask_next(net); int d, err;
@@ -357,8 +358,11 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set, if (!nft_set_elem_active(&rbe->ext, genmask)) continue;
- /* perform garbage collection to avoid bogus overlap reports. */ - if (nft_set_elem_expired(&rbe->ext)) { + /* perform garbage collection to avoid bogus overlap reports + * but skip new elements in this transaction. + */ + if (nft_set_elem_expired(&rbe->ext) && + nft_set_elem_active(&rbe->ext, cur_genmask)) { err = nft_rbtree_gc_elem(set, priv, rbe, genmask); if (err < 0) return err;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
commit 96b33300fba880ec0eafcf3d82486f3463b4b6da upstream.
rbtree GC does not modify the datastructure, instead it collects expired elements and it enqueues a GC transaction. Use a read spinlock instead to avoid data contention while GC worker is running.
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nft_set_rbtree.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index f250b5399344a..70491ba98decb 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -622,8 +622,7 @@ static void nft_rbtree_gc(struct work_struct *work) if (!gc) goto done;
- write_lock_bh(&priv->lock); - write_seqcount_begin(&priv->count); + read_lock_bh(&priv->lock); for (node = rb_first(&priv->root); node != NULL; node = rb_next(node)) {
/* Ruleset has been updated, try later. */ @@ -673,8 +672,7 @@ static void nft_rbtree_gc(struct work_struct *work) gc = nft_trans_gc_catchall(gc, gc_seq);
try_later: - write_seqcount_end(&priv->count); - write_unlock_bh(&priv->lock); + read_unlock_bh(&priv->lock);
if (gc) nft_trans_gc_queue_async_done(gc);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
commit 4a9e12ea7e70223555ec010bec9f711089ce96f6 upstream.
pipapo needs to enqueue GC transactions for catchall elements through nft_trans_gc_queue_sync(). Add nft_trans_gc_catchall_sync() and nft_trans_gc_catchall_async() to handle GC transaction queueing accordingly.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/netfilter/nf_tables.h | 5 +++-- net/netfilter/nf_tables_api.c | 22 +++++++++++++++++++--- net/netfilter/nft_set_hash.c | 2 +- net/netfilter/nft_set_pipapo.c | 2 +- net/netfilter/nft_set_rbtree.c | 2 +- 5 files changed, 25 insertions(+), 8 deletions(-)
diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 12777a5b60cd0..eb2103a9a7dd9 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -1675,8 +1675,9 @@ void nft_trans_gc_queue_sync_done(struct nft_trans_gc *trans);
void nft_trans_gc_elem_add(struct nft_trans_gc *gc, void *priv);
-struct nft_trans_gc *nft_trans_gc_catchall(struct nft_trans_gc *gc, - unsigned int gc_seq); +struct nft_trans_gc *nft_trans_gc_catchall_async(struct nft_trans_gc *gc, + unsigned int gc_seq); +struct nft_trans_gc *nft_trans_gc_catchall_sync(struct nft_trans_gc *gc);
void nft_setelem_data_deactivate(const struct net *net, const struct nft_set *set, diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 47f3632c78bfb..6e67fb999a256 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -9233,8 +9233,9 @@ void nft_trans_gc_queue_sync_done(struct nft_trans_gc *trans) call_rcu(&trans->rcu, nft_trans_gc_trans_free); }
-struct nft_trans_gc *nft_trans_gc_catchall(struct nft_trans_gc *gc, - unsigned int gc_seq) +static struct nft_trans_gc *nft_trans_gc_catchall(struct nft_trans_gc *gc, + unsigned int gc_seq, + bool sync) { struct nft_set_elem_catchall *catchall; const struct nft_set *set = gc->set; @@ -9250,7 +9251,11 @@ struct nft_trans_gc *nft_trans_gc_catchall(struct nft_trans_gc *gc,
nft_set_elem_dead(ext); dead_elem: - gc = nft_trans_gc_queue_async(gc, gc_seq, GFP_ATOMIC); + if (sync) + gc = nft_trans_gc_queue_sync(gc, GFP_ATOMIC); + else + gc = nft_trans_gc_queue_async(gc, gc_seq, GFP_ATOMIC); + if (!gc) return NULL;
@@ -9260,6 +9265,17 @@ struct nft_trans_gc *nft_trans_gc_catchall(struct nft_trans_gc *gc, return gc; }
+struct nft_trans_gc *nft_trans_gc_catchall_async(struct nft_trans_gc *gc, + unsigned int gc_seq) +{ + return nft_trans_gc_catchall(gc, gc_seq, false); +} + +struct nft_trans_gc *nft_trans_gc_catchall_sync(struct nft_trans_gc *gc) +{ + return nft_trans_gc_catchall(gc, 0, true); +} + static void nf_tables_module_autoload_cleanup(struct net *net) { struct nftables_pernet *nft_net = nft_pernet(net); diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index 524763659f251..eca20dc601384 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -372,7 +372,7 @@ static void nft_rhash_gc(struct work_struct *work) nft_trans_gc_elem_add(gc, he); }
- gc = nft_trans_gc_catchall(gc, gc_seq); + gc = nft_trans_gc_catchall_async(gc, gc_seq);
try_later: /* catchall list iteration requires rcu read side lock. */ diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c index 58bd514260b90..7248a1737ee14 100644 --- a/net/netfilter/nft_set_pipapo.c +++ b/net/netfilter/nft_set_pipapo.c @@ -1611,7 +1611,7 @@ static void pipapo_gc(const struct nft_set *_set, struct nft_pipapo_match *m) } }
- gc = nft_trans_gc_catchall(gc, 0); + gc = nft_trans_gc_catchall_sync(gc); if (gc) { nft_trans_gc_queue_sync_done(gc); priv->last_gc = jiffies; diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index 70491ba98decb..487572dcd6144 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -669,7 +669,7 @@ static void nft_rbtree_gc(struct work_struct *work) nft_trans_gc_elem_add(gc, rbe); }
- gc = nft_trans_gc_catchall(gc, gc_seq); + gc = nft_trans_gc_catchall_async(gc, gc_seq);
try_later: read_unlock_bh(&priv->lock);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
commit 6d365eabce3c018a80f6e0379b17df2abb17405e upstream.
nft_trans_gc_queue_sync() enqueues the GC transaction and it allocates a new one. If this allocation fails, then stop this GC sync run and retry later.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nft_set_pipapo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c index 7248a1737ee14..83f5f276c3bff 100644 --- a/net/netfilter/nft_set_pipapo.c +++ b/net/netfilter/nft_set_pipapo.c @@ -1597,7 +1597,7 @@ static void pipapo_gc(const struct nft_set *_set, struct nft_pipapo_match *m)
gc = nft_trans_gc_queue_sync(gc, GFP_ATOMIC); if (!gc) - break; + return;
nft_pipapo_gc_deactivate(net, set, e); pipapo_drop(m, rulemap);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
commit b079155faae94e9b3ab9337e82100a914ebb4e8d upstream.
Skip GC run if iterator rewinds to the beginning with EAGAIN, otherwise GC might collect the same element more than once.
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nft_set_hash.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index eca20dc601384..2013de934cef0 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -338,12 +338,9 @@ static void nft_rhash_gc(struct work_struct *work)
while ((he = rhashtable_walk_next(&hti))) { if (IS_ERR(he)) { - if (PTR_ERR(he) != -EAGAIN) { - nft_trans_gc_destroy(gc); - gc = NULL; - goto try_later; - } - continue; + nft_trans_gc_destroy(gc); + gc = NULL; + goto try_later; }
/* Ruleset has been updated, try later. */
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal fw@strlen.de
commit cf5000a7787cbc10341091d37245a42c119d26c5 upstream.
When more than 255 elements expired we're supposed to switch to a new gc container structure.
This never happens: u8 type will wrap before reaching the boundary and nft_trans_gc_space() always returns true.
This means we recycle the initial gc container structure and lose track of the elements that came before.
While at it, don't deref 'gc' after we've passed it to call_rcu.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Reported-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/netfilter/nf_tables.h | 2 +- net/netfilter/nf_tables_api.c | 10 ++++++++-- 2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index eb2103a9a7dd9..05d7a60a0e1f3 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -1657,7 +1657,7 @@ struct nft_trans_gc { struct net *net; struct nft_set *set; u32 seq; - u8 count; + u16 count; void *priv[NFT_TRANS_GC_BATCHCOUNT]; struct rcu_head rcu; }; diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 6e67fb999a256..b22f2d9ee4afc 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -9190,12 +9190,15 @@ static int nft_trans_gc_space(struct nft_trans_gc *trans) struct nft_trans_gc *nft_trans_gc_queue_async(struct nft_trans_gc *gc, unsigned int gc_seq, gfp_t gfp) { + struct nft_set *set; + if (nft_trans_gc_space(gc)) return gc;
+ set = gc->set; nft_trans_gc_queue_work(gc);
- return nft_trans_gc_alloc(gc->set, gc_seq, gfp); + return nft_trans_gc_alloc(set, gc_seq, gfp); }
void nft_trans_gc_queue_async_done(struct nft_trans_gc *trans) @@ -9210,15 +9213,18 @@ void nft_trans_gc_queue_async_done(struct nft_trans_gc *trans)
struct nft_trans_gc *nft_trans_gc_queue_sync(struct nft_trans_gc *gc, gfp_t gfp) { + struct nft_set *set; + if (WARN_ON_ONCE(!lockdep_commit_lock_is_held(gc->net))) return NULL;
if (nft_trans_gc_space(gc)) return gc;
+ set = gc->set; call_rcu(&gc->rcu, nft_trans_gc_trans_free);
- return nft_trans_gc_alloc(gc->set, 0, gfp); + return nft_trans_gc_alloc(set, 0, gfp); }
void nft_trans_gc_queue_sync_done(struct nft_trans_gc *trans)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jerome Brunet jbrunet@baylibre.com
[ Upstream commit aedf323b66b2b875137422ecb7d2525179759076 ]
For spdif input to report the locked rate correctly, even when no capture is running, the HW and reference clock must be started as soon as the dai is probed.
Fixes: 5ce5658375e6 ("ASoC: meson: add axg spdif input") Signed-off-by: Jerome Brunet jbrunet@baylibre.com Link: https://lore.kernel.org/r/20230907090504.12700-1-jbrunet@baylibre.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/meson/axg-spdifin.c | 49 ++++++++++++----------------------- 1 file changed, 17 insertions(+), 32 deletions(-)
diff --git a/sound/soc/meson/axg-spdifin.c b/sound/soc/meson/axg-spdifin.c index e2cc4c4be7586..97e81ec4a78ce 100644 --- a/sound/soc/meson/axg-spdifin.c +++ b/sound/soc/meson/axg-spdifin.c @@ -112,34 +112,6 @@ static int axg_spdifin_prepare(struct snd_pcm_substream *substream, return 0; }
-static int axg_spdifin_startup(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai); - int ret; - - ret = clk_prepare_enable(priv->refclk); - if (ret) { - dev_err(dai->dev, - "failed to enable spdifin reference clock\n"); - return ret; - } - - regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN, - SPDIFIN_CTRL0_EN); - - return 0; -} - -static void axg_spdifin_shutdown(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai); - - regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN, 0); - clk_disable_unprepare(priv->refclk); -} - static void axg_spdifin_write_mode_param(struct regmap *map, int mode, unsigned int val, unsigned int num_per_reg, @@ -251,25 +223,38 @@ static int axg_spdifin_dai_probe(struct snd_soc_dai *dai) ret = axg_spdifin_sample_mode_config(dai, priv); if (ret) { dev_err(dai->dev, "mode configuration failed\n"); - clk_disable_unprepare(priv->pclk); - return ret; + goto pclk_err; }
+ ret = clk_prepare_enable(priv->refclk); + if (ret) { + dev_err(dai->dev, + "failed to enable spdifin reference clock\n"); + goto pclk_err; + } + + regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN, + SPDIFIN_CTRL0_EN); + return 0; + +pclk_err: + clk_disable_unprepare(priv->pclk); + return ret; }
static int axg_spdifin_dai_remove(struct snd_soc_dai *dai) { struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
+ regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN, 0); + clk_disable_unprepare(priv->refclk); clk_disable_unprepare(priv->pclk); return 0; }
static const struct snd_soc_dai_ops axg_spdifin_ops = { .prepare = axg_spdifin_prepare, - .startup = axg_spdifin_startup, - .shutdown = axg_spdifin_shutdown, };
static int axg_spdifin_iec958_info(struct snd_kcontrol *kcontrol,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
[ Upstream commit 23a3bfd4ba7acd36abf52b78605f61b21bdac216 ]
Anonymous sets need to be populated once at creation and then they are bound to rule since 938154b93be8 ("netfilter: nf_tables: reject unbound anonymous set before commit phase"), otherwise transaction reports EINVAL.
Userspace does not need to delete elements of anonymous sets that are not yet bound, reject this with EOPNOTSUPP.
From flush command path, skip anonymous sets, they are expected to be
bound already. Otherwise, EINVAL is hit at the end of this transaction for unbound sets.
Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index b22f2d9ee4afc..521f8c3cb6987 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -1437,8 +1437,7 @@ static int nft_flush_table(struct nft_ctx *ctx) if (!nft_is_active_next(ctx->net, set)) continue;
- if (nft_set_is_anonymous(set) && - !list_empty(&set->bindings)) + if (nft_set_is_anonymous(set)) continue;
err = nft_delset(ctx, set); @@ -6907,8 +6906,10 @@ static int nf_tables_delsetelem(struct sk_buff *skb, if (IS_ERR(set)) return PTR_ERR(set);
- if (!list_empty(&set->bindings) && - (set->flags & (NFT_SET_CONSTANT | NFT_SET_ANONYMOUS))) + if (nft_set_is_anonymous(set)) + return -EOPNOTSUPP; + + if (!list_empty(&set->bindings) && (set->flags & NFT_SET_CONSTANT)) return -EBUSY;
nft_ctx_init(&ctx, net, skb, info->nlh, family, table, NULL, nla);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Toke Høiland-Jørgensen toke@redhat.com
[ Upstream commit a34a9f1a19afe9c60ca0ea61dfeee63a1c2baac8 ]
Sysbot discovered that the queue and stack maps can deadlock if they are being used from a BPF program that can be called from NMI context (such as one that is attached to a perf HW counter event). To fix this, add an in_nmi() check and use raw_spin_trylock() in NMI context, erroring out if grabbing the lock fails.
Fixes: f1a2e44a3aec ("bpf: add queue and stack maps") Reported-by: Hsin-Wei Hung hsinweih@uci.edu Tested-by: Hsin-Wei Hung hsinweih@uci.edu Co-developed-by: Hsin-Wei Hung hsinweih@uci.edu Signed-off-by: Toke Høiland-Jørgensen toke@redhat.com Link: https://lore.kernel.org/r/20230911132815.717240-1-toke@redhat.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/bpf/queue_stack_maps.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/kernel/bpf/queue_stack_maps.c b/kernel/bpf/queue_stack_maps.c index 8a5e060de63bc..a8fe640318c6c 100644 --- a/kernel/bpf/queue_stack_maps.c +++ b/kernel/bpf/queue_stack_maps.c @@ -102,7 +102,12 @@ static int __queue_map_get(struct bpf_map *map, void *value, bool delete) int err = 0; void *ptr;
- raw_spin_lock_irqsave(&qs->lock, flags); + if (in_nmi()) { + if (!raw_spin_trylock_irqsave(&qs->lock, flags)) + return -EBUSY; + } else { + raw_spin_lock_irqsave(&qs->lock, flags); + }
if (queue_stack_map_is_empty(qs)) { memset(value, 0, qs->map.value_size); @@ -132,7 +137,12 @@ static int __stack_map_get(struct bpf_map *map, void *value, bool delete) void *ptr; u32 index;
- raw_spin_lock_irqsave(&qs->lock, flags); + if (in_nmi()) { + if (!raw_spin_trylock_irqsave(&qs->lock, flags)) + return -EBUSY; + } else { + raw_spin_lock_irqsave(&qs->lock, flags); + }
if (queue_stack_map_is_empty(qs)) { memset(value, 0, qs->map.value_size); @@ -197,7 +207,12 @@ static int queue_stack_map_push_elem(struct bpf_map *map, void *value, if (flags & BPF_NOEXIST || flags > BPF_EXIST) return -EINVAL;
- raw_spin_lock_irqsave(&qs->lock, irq_flags); + if (in_nmi()) { + if (!raw_spin_trylock_irqsave(&qs->lock, irq_flags)) + return -EBUSY; + } else { + raw_spin_lock_irqsave(&qs->lock, irq_flags); + }
if (queue_stack_map_is_full(qs)) { if (!replace) {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit fa6a0c0c1dd53b3949ca56bf7213648dfd6a62ee ]
Commit 70a6404ff610 ("ASoC: rt5640: Fix sleep in atomic context") not only switched from request_irq() to request_threaded_irq(), to fix the sleep in atomic context issue, but it also added devm management of the IRQ by actually switching to devm_request_threaded_irq() (without any explanation in the commit message for this change).
This is wrong since the IRQ was already explicitly managed by the driver. On unbind the ASoC core will call rt5640_set_jack(NULL) which in turn will call rt5640_disable_jack_detect() which frees the IRQ already. So now we have a double free.
Besides the unexplained switch to devm being wrong, the actual fix for the sleep in atomic context issue also is not the best solution.
The only thing which rt5640_irq() does is cancel + (re-)queue the jack_work delayed_work. This can be done in a single non sleeping call by replacing queue_delayed_work() with mod_delayed_work(), which does not sleep. Using mod_delayed_work() is a much better fix then adding a thread which does nothing other then queuing a work-item.
This patch is a straight revert of the troublesome changes, the switch to mod_delayed_work() is done in a separate follow-up patch.
Fixes: 70a6404ff610 ("ASoC: rt5640: Fix sleep in atomic context") Cc: Sameer Pujar spujar@nvidia.com Cc: Oder Chiou oder_chiou@realtek.com Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20230912113245.320159-2-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5640.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index a7071d0a2562f..0f8e6dd214b0d 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -2562,10 +2562,9 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component, if (jack_data && jack_data->use_platform_clock) rt5640->use_platform_clock = jack_data->use_platform_clock;
- ret = devm_request_threaded_irq(component->dev, rt5640->irq, - NULL, rt5640_irq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - "rt5640", rt5640); + ret = request_irq(rt5640->irq, rt5640_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "rt5640", rt5640); if (ret) { dev_warn(component->dev, "Failed to reguest IRQ %d: %d\n", rt5640->irq, ret); rt5640_disable_jack_detect(component); @@ -2618,9 +2617,8 @@ static void rt5640_enable_hda_jack_detect(
rt5640->jack = jack;
- ret = devm_request_threaded_irq(component->dev, rt5640->irq, - NULL, rt5640_irq, IRQF_TRIGGER_RISING | IRQF_ONESHOT, - "rt5640", rt5640); + ret = request_irq(rt5640->irq, rt5640_irq, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, "rt5640", rt5640); if (ret) { dev_warn(component->dev, "Failed to reguest IRQ %d: %d\n", rt5640->irq, ret); rt5640->irq = -ENXIO;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 8c8bf3df6b7c0ed1c4dd373b23eb0ce13a63f452 ]
Set "rt5640->irq_requested = true" after a successful request_irq() in rt5640_enable_hda_jack_detect(), so that rt5640_disable_jack_detect() properly frees the IRQ.
This fixes the IRQ not being freed on rmmod / driver unbind.
Fixes: 2b9c8d2b3c89 ("ASoC: rt5640: Add the HDA header support") Cc: Oder Chiou oder_chiou@realtek.com Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20230912113245.320159-6-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5640.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index 0f8e6dd214b0d..37ea4d854cb58 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -2624,6 +2624,7 @@ static void rt5640_enable_hda_jack_detect( rt5640->irq = -ENXIO; return; } + rt5640->irq_requested = true;
/* sync initial jack state */ queue_delayed_work(system_long_wq, &rt5640->jack_work, 0);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Knyazev Arseniy poseaydone@ya.ru
[ Upstream commit 07058dceb038a4b0dd49af07118b6b2a685bb4a6 ]
UX3402VA and UX3402ZA models require different hex values, so comibining them into one model is incorrect.
Fixes: 491a4ccd8a02 ("ALSA: hda/realtek: Add quirk for ASUS Zenbook using CS35L41") Signed-off-by: Knyazev Arseniy poseaydone@ya.ru Link: https://lore.kernel.org/r/20230913053343.119798-1-poseaydone@ya.ru Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f70e0ad81607e..57e07aa4e136c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9657,7 +9657,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1d1f, "ASUS ROG Strix G17 2023 (G713PV)", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), - SND_PCI_QUIRK(0x1043, 0x1e02, "ASUS UX3402", ALC245_FIXUP_CS35L41_SPI_2), + SND_PCI_QUIRK(0x1043, 0x1e02, "ASUS UX3402ZA", ALC245_FIXUP_CS35L41_SPI_2), + SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS UX3402VA", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502), SND_PCI_QUIRK(0x1043, 0x1e12, "ASUS UM3402", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS),
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal fw@strlen.de
[ Upstream commit 4908d5af16676b9d2901830551c2af911e452524 ]
The size table is incorrect due to copypaste error, this reserves more size than needed.
TSTAMP reserved 32 instead of 16 bytes. TIMEOUT reserved 16 instead of 8 bytes.
Fixes: 5f31edc0676b ("netfilter: conntrack: move extension sizes into core") Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_conntrack_extend.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c index 0b513f7bf9f39..dd62cc12e7750 100644 --- a/net/netfilter/nf_conntrack_extend.c +++ b/net/netfilter/nf_conntrack_extend.c @@ -40,10 +40,10 @@ static const u8 nf_ct_ext_type_len[NF_CT_EXT_NUM] = { [NF_CT_EXT_ECACHE] = sizeof(struct nf_conntrack_ecache), #endif #ifdef CONFIG_NF_CONNTRACK_TIMESTAMP - [NF_CT_EXT_TSTAMP] = sizeof(struct nf_conn_acct), + [NF_CT_EXT_TSTAMP] = sizeof(struct nf_conn_tstamp), #endif #ifdef CONFIG_NF_CONNTRACK_TIMEOUT - [NF_CT_EXT_TIMEOUT] = sizeof(struct nf_conn_tstamp), + [NF_CT_EXT_TIMEOUT] = sizeof(struct nf_conn_timeout), #endif #ifdef CONFIG_NF_CONNTRACK_LABELS [NF_CT_EXT_LABELS] = sizeof(struct nf_conn_labels),
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sabrina Dubroca sd@queasysnail.net
[ Upstream commit c326ca98446e0ae4fee43a40acf79412b74cfedb ]
tls.sendmsg_large and tls.sendmsg_multiple are trying to send through the self->cfd socket (only configured with TLS_RX) and to receive through the self->fd socket (only configured with TLS_TX), so they're not using kTLS at all. Swap the sockets.
Fixes: 7f657d5bf507 ("selftests: tls: add selftests for TLS sockets") Signed-off-by: Sabrina Dubroca sd@queasysnail.net Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/net/tls.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c index c0ad8385441f2..5b80fb155d549 100644 --- a/tools/testing/selftests/net/tls.c +++ b/tools/testing/selftests/net/tls.c @@ -551,11 +551,11 @@ TEST_F(tls, sendmsg_large)
msg.msg_iov = &vec; msg.msg_iovlen = 1; - EXPECT_EQ(sendmsg(self->cfd, &msg, 0), send_len); + EXPECT_EQ(sendmsg(self->fd, &msg, 0), send_len); }
while (recvs++ < sends) { - EXPECT_NE(recv(self->fd, mem, send_len, 0), -1); + EXPECT_NE(recv(self->cfd, mem, send_len, 0), -1); }
free(mem); @@ -584,9 +584,9 @@ TEST_F(tls, sendmsg_multiple) msg.msg_iov = vec; msg.msg_iovlen = iov_len;
- EXPECT_EQ(sendmsg(self->cfd, &msg, 0), total_len); + EXPECT_EQ(sendmsg(self->fd, &msg, 0), total_len); buf = malloc(total_len); - EXPECT_NE(recv(self->fd, buf, total_len, 0), -1); + EXPECT_NE(recv(self->cfd, buf, total_len, 0), -1); for (i = 0; i < iov_len; i++) { EXPECT_EQ(memcmp(test_strs[i], buf + len_cmp, strlen(test_strs[i])),
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sasha Neftin sasha.neftin@intel.com
[ Upstream commit 75ad80ed88a182ab2ad5513e448cf07b403af5c3 ]
When a PTP ethernet raw frame with a size of more than 256 bytes followed by a 0xff pattern is sent to __skb_flow_dissect, nhoff value calculation is wrong. For example: hdr->message_length takes the wrong value (0xffff) and it does not replicate real header length. In this case, 'nhoff' value was overridden and the PTP header was badly dissected. This leads to a kernel crash.
net/core: flow_dissector net/core flow dissector nhoff = 0x0000000e net/core flow dissector hdr->message_length = 0x0000ffff net/core flow dissector nhoff = 0x0001000d (u16 overflow) ... skb linear: 00000000: 00 a0 c9 00 00 00 00 a0 c9 00 00 00 88 skb frag: 00000000: f7 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Using the size of the ptp_header struct will allow the corrected calculation of the nhoff value.
net/core flow dissector nhoff = 0x0000000e net/core flow dissector nhoff = 0x00000030 (sizeof ptp_header) ... skb linear: 00000000: 00 a0 c9 00 00 00 00 a0 c9 00 00 00 88 f7 ff ff skb linear: 00000010: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff skb linear: 00000020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff skb frag: 00000000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Kernel trace: [ 74.984279] ------------[ cut here ]------------ [ 74.989471] kernel BUG at include/linux/skbuff.h:2440! [ 74.995237] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 75.001098] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G U 5.15.85-intel-ese-standard-lts #1 [ 75.011629] Hardware name: Intel Corporation A-Island (CPU:AlderLake)/A-Island (ID:06), BIOS SB_ADLP.01.01.00.01.03.008.D-6A9D9E73-dirty Mar 30 2023 [ 75.026507] RIP: 0010:eth_type_trans+0xd0/0x130 [ 75.031594] Code: 03 88 47 78 eb c7 8b 47 68 2b 47 6c 48 8b 97 c0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb ab <0f> 0b b8 00 01 00 00 eb a2 48 85 ff 74 eb 48 8d 54 24 06 31 f6 b9 [ 75.052612] RSP: 0018:ffff9948c0228de0 EFLAGS: 00010297 [ 75.058473] RAX: 00000000000003f2 RBX: ffff8e47047dc300 RCX: 0000000000001003 [ 75.066462] RDX: ffff8e4e8c9ea040 RSI: ffff8e4704e0a000 RDI: ffff8e47047dc300 [ 75.074458] RBP: ffff8e4704e2acc0 R08: 00000000000003f3 R09: 0000000000000800 [ 75.082466] R10: 000000000000000d R11: ffff9948c0228dec R12: ffff8e4715e4e010 [ 75.090461] R13: ffff9948c0545018 R14: 0000000000000001 R15: 0000000000000800 [ 75.098464] FS: 0000000000000000(0000) GS:ffff8e4e8fb00000(0000) knlGS:0000000000000000 [ 75.107530] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 75.113982] CR2: 00007f5eb35934a0 CR3: 0000000150e0a002 CR4: 0000000000770ee0 [ 75.121980] PKRU: 55555554 [ 75.125035] Call Trace: [ 75.127792] <IRQ> [ 75.130063] ? eth_get_headlen+0xa4/0xc0 [ 75.134472] igc_process_skb_fields+0xcd/0x150 [ 75.139461] igc_poll+0xc80/0x17b0 [ 75.143272] __napi_poll+0x27/0x170 [ 75.147192] net_rx_action+0x234/0x280 [ 75.151409] __do_softirq+0xef/0x2f4 [ 75.155424] irq_exit_rcu+0xc7/0x110 [ 75.159432] common_interrupt+0xb8/0xd0 [ 75.163748] </IRQ> [ 75.166112] <TASK> [ 75.168473] asm_common_interrupt+0x22/0x40 [ 75.173175] RIP: 0010:cpuidle_enter_state+0xe2/0x350 [ 75.178749] Code: 85 c0 0f 8f 04 02 00 00 31 ff e8 39 6c 67 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 50 02 00 00 31 ff e8 52 b0 6d ff fb 45 85 f6 <0f> 88 b1 00 00 00 49 63 ce 4c 2b 2c 24 48 89 c8 48 6b d1 68 48 c1 [ 75.199757] RSP: 0018:ffff9948c013bea8 EFLAGS: 00000202 [ 75.205614] RAX: ffff8e4e8fb00000 RBX: ffffb948bfd23900 RCX: 000000000000001f [ 75.213619] RDX: 0000000000000004 RSI: ffffffff94206161 RDI: ffffffff94212e20 [ 75.221620] RBP: 0000000000000004 R08: 000000117568973a R09: 0000000000000001 [ 75.229622] R10: 000000000000afc8 R11: ffff8e4e8fb29ce4 R12: ffffffff945ae980 [ 75.237628] R13: 000000117568973a R14: 0000000000000004 R15: 0000000000000000 [ 75.245635] ? cpuidle_enter_state+0xc7/0x350 [ 75.250518] cpuidle_enter+0x29/0x40 [ 75.254539] do_idle+0x1d9/0x260 [ 75.258166] cpu_startup_entry+0x19/0x20 [ 75.262582] secondary_startup_64_no_verify+0xc2/0xcb [ 75.268259] </TASK> [ 75.270721] Modules linked in: 8021q snd_sof_pci_intel_tgl snd_sof_intel_hda_common tpm_crb snd_soc_hdac_hda snd_sof_intel_hda snd_hda_ext_core snd_sof_pci snd_sof snd_sof_xtensa_dsp snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core snd_compress iTCO_wdt ac97_bus intel_pmc_bxt mei_hdcp iTCO_vendor_support snd_hda_codec_hdmi pmt_telemetry intel_pmc_core pmt_class snd_hda_intel x86_pkg_temp_thermal snd_intel_dspcfg snd_hda_codec snd_hda_core kvm_intel snd_pcm snd_timer kvm snd mei_me soundcore tpm_tis irqbypass i2c_i801 mei tpm_tis_core pcspkr intel_rapl_msr tpm i2c_smbus intel_pmt thermal sch_fq_codel uio uhid i915 drm_buddy video drm_display_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm fuse configfs [ 75.342736] ---[ end trace 3785f9f360400e3a ]--- [ 75.347913] RIP: 0010:eth_type_trans+0xd0/0x130 [ 75.352984] Code: 03 88 47 78 eb c7 8b 47 68 2b 47 6c 48 8b 97 c0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb ab <0f> 0b b8 00 01 00 00 eb a2 48 85 ff 74 eb 48 8d 54 24 06 31 f6 b9 [ 75.373994] RSP: 0018:ffff9948c0228de0 EFLAGS: 00010297 [ 75.379860] RAX: 00000000000003f2 RBX: ffff8e47047dc300 RCX: 0000000000001003 [ 75.387856] RDX: ffff8e4e8c9ea040 RSI: ffff8e4704e0a000 RDI: ffff8e47047dc300 [ 75.395864] RBP: ffff8e4704e2acc0 R08: 00000000000003f3 R09: 0000000000000800 [ 75.403857] R10: 000000000000000d R11: ffff9948c0228dec R12: ffff8e4715e4e010 [ 75.411863] R13: ffff9948c0545018 R14: 0000000000000001 R15: 0000000000000800 [ 75.419875] FS: 0000000000000000(0000) GS:ffff8e4e8fb00000(0000) knlGS:0000000000000000 [ 75.428946] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 75.435403] CR2: 00007f5eb35934a0 CR3: 0000000150e0a002 CR4: 0000000000770ee0 [ 75.443410] PKRU: 55555554 [ 75.446477] Kernel panic - not syncing: Fatal exception in interrupt [ 75.453738] Kernel Offset: 0x11c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 75.465794] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fixes: 4f1cc51f3488 ("net: flow_dissector: Parse PTP L2 packet header") Signed-off-by: Sasha Neftin sasha.neftin@intel.com Reviewed-by: Jiri Pirko jiri@nvidia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/flow_dissector.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c index 3288490590f27..0c85c8a9e752f 100644 --- a/net/core/flow_dissector.c +++ b/net/core/flow_dissector.c @@ -1366,7 +1366,7 @@ bool __skb_flow_dissect(const struct net *net, break; }
- nhoff += ntohs(hdr->message_length); + nhoff += sizeof(struct ptp_header); fdret = FLOW_DISSECT_RET_OUT_GOOD; break; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chen Ni nichen@iscas.ac.cn
[ Upstream commit c04efbfd76d23157e64e6d6147518c187ab4233a ]
Because of the potential failure of the devm_kstrdup(), the dl[i].codecs->name could be NULL. Therefore, we need to check it and return -ENOMEM in order to transfer the error.
Fixes: 97030a43371e ("ASoC: Intel: avs: Add HDAudio machine board") Signed-off-by: Chen Ni nichen@iscas.ac.cn Reviewed-by: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com Link: https://lore.kernel.org/r/20230915021344.3078-1-nichen@iscas.ac.cn Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/avs/boards/hdaudio.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/sound/soc/intel/avs/boards/hdaudio.c b/sound/soc/intel/avs/boards/hdaudio.c index 073663ba140d0..a65939f30ac47 100644 --- a/sound/soc/intel/avs/boards/hdaudio.c +++ b/sound/soc/intel/avs/boards/hdaudio.c @@ -54,6 +54,9 @@ static int avs_create_dai_links(struct device *dev, struct hda_codec *codec, int return -ENOMEM;
dl[i].codecs->name = devm_kstrdup(dev, cname, GFP_KERNEL); + if (!dl[i].codecs->name) + return -ENOMEM; + dl[i].codecs->dai_name = pcm->name; dl[i].num_codecs = 1; dl[i].num_cpus = 1;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shengjiu Wang shengjiu.wang@nxp.com
[ Upstream commit b19a5733de255cabba5feecabf6e900638b582d1 ]
The devm_clk_get() can return -EPROBE_DEFER error, modify the error code to be -EINVAL is not correct, which cause the -EPROBE_DEFER error is not correctly handled.
This patch is to fix the return error code.
Fixes: b86ef5367761 ("ASoC: fsl: Add Audio Mixer machine driver") Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com Reviewed-by: Daniel Baluta daniel.baluta@nxp.com Link: https://lore.kernel.org/r/1694757731-18308-1-git-send-email-shengjiu.wang@nx... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/fsl/imx-audmix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/fsl/imx-audmix.c b/sound/soc/fsl/imx-audmix.c index d8e99b263ab21..cbe24d5b4e46a 100644 --- a/sound/soc/fsl/imx-audmix.c +++ b/sound/soc/fsl/imx-audmix.c @@ -320,7 +320,7 @@ static int imx_audmix_probe(struct platform_device *pdev) if (IS_ERR(priv->cpu_mclk)) { ret = PTR_ERR(priv->cpu_mclk); dev_err(&cpu_pdev->dev, "failed to get DAI mclk1: %d\n", ret); - return -EINVAL; + return ret; }
priv->audmix_pdev = audmix_pdev;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shinas Rasheed srasheed@marvell.com
[ Upstream commit 350db8a59eb392bf42e62b6b2a37d56b5833012b ]
Lengths of SG pointers are kept in the following order in the SG entries in hardware. 63 48|47 32|31 16|15 0 ----------------------------------------- | Len 0 | Len 1 | Len 2 | Len 3 | ----------------------------------------- | Ptr 0 | ----------------------------------------- | Ptr 1 | ----------------------------------------- | Ptr 2 | ----------------------------------------- | Ptr 3 | ----------------------------------------- Dma pointers have to be unmapped based on their respective lengths given in this format.
Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Shinas Rasheed srasheed@marvell.com Reviewed-by: Simon Horman horms@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/marvell/octeon_ep/octep_main.c | 8 ++++---- .../net/ethernet/marvell/octeon_ep/octep_tx.c | 8 ++++---- .../net/ethernet/marvell/octeon_ep/octep_tx.h | 16 +++++++++++++++- 3 files changed, 23 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c index d4ec46d1c8cfb..61354f7985035 100644 --- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c +++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c @@ -726,13 +726,13 @@ static netdev_tx_t octep_start_xmit(struct sk_buff *skb, dma_map_sg_err: if (si > 0) { dma_unmap_single(iq->dev, sglist[0].dma_ptr[0], - sglist[0].len[0], DMA_TO_DEVICE); - sglist[0].len[0] = 0; + sglist[0].len[3], DMA_TO_DEVICE); + sglist[0].len[3] = 0; } while (si > 1) { dma_unmap_page(iq->dev, sglist[si >> 2].dma_ptr[si & 3], - sglist[si >> 2].len[si & 3], DMA_TO_DEVICE); - sglist[si >> 2].len[si & 3] = 0; + sglist[si >> 2].len[3 - (si & 3)], DMA_TO_DEVICE); + sglist[si >> 2].len[3 - (si & 3)] = 0; si--; } tx_buffer->gather = 0; diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_tx.c b/drivers/net/ethernet/marvell/octeon_ep/octep_tx.c index 5a520d37bea02..d0adb82d65c31 100644 --- a/drivers/net/ethernet/marvell/octeon_ep/octep_tx.c +++ b/drivers/net/ethernet/marvell/octeon_ep/octep_tx.c @@ -69,12 +69,12 @@ int octep_iq_process_completions(struct octep_iq *iq, u16 budget) compl_sg++;
dma_unmap_single(iq->dev, tx_buffer->sglist[0].dma_ptr[0], - tx_buffer->sglist[0].len[0], DMA_TO_DEVICE); + tx_buffer->sglist[0].len[3], DMA_TO_DEVICE);
i = 1; /* entry 0 is main skb, unmapped above */ while (frags--) { dma_unmap_page(iq->dev, tx_buffer->sglist[i >> 2].dma_ptr[i & 3], - tx_buffer->sglist[i >> 2].len[i & 3], DMA_TO_DEVICE); + tx_buffer->sglist[i >> 2].len[3 - (i & 3)], DMA_TO_DEVICE); i++; }
@@ -131,13 +131,13 @@ static void octep_iq_free_pending(struct octep_iq *iq)
dma_unmap_single(iq->dev, tx_buffer->sglist[0].dma_ptr[0], - tx_buffer->sglist[0].len[0], + tx_buffer->sglist[0].len[3], DMA_TO_DEVICE);
i = 1; /* entry 0 is main skb, unmapped above */ while (frags--) { dma_unmap_page(iq->dev, tx_buffer->sglist[i >> 2].dma_ptr[i & 3], - tx_buffer->sglist[i >> 2].len[i & 3], DMA_TO_DEVICE); + tx_buffer->sglist[i >> 2].len[3 - (i & 3)], DMA_TO_DEVICE); i++; }
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_tx.h b/drivers/net/ethernet/marvell/octeon_ep/octep_tx.h index 2ef57980eb47b..21e75ff9f5e71 100644 --- a/drivers/net/ethernet/marvell/octeon_ep/octep_tx.h +++ b/drivers/net/ethernet/marvell/octeon_ep/octep_tx.h @@ -17,7 +17,21 @@ #define TX_BUFTYPE_NET_SG 2 #define NUM_TX_BUFTYPES 3
-/* Hardware format for Scatter/Gather list */ +/* Hardware format for Scatter/Gather list + * + * 63 48|47 32|31 16|15 0 + * ----------------------------------------- + * | Len 0 | Len 1 | Len 2 | Len 3 | + * ----------------------------------------- + * | Ptr 0 | + * ----------------------------------------- + * | Ptr 1 | + * ----------------------------------------- + * | Ptr 2 | + * ----------------------------------------- + * | Ptr 3 | + * ----------------------------------------- + */ struct octep_tx_sglist_desc { u16 len[4]; dma_addr_t dma_ptr[4];
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Radoslaw Tyl radoslawx.tyl@intel.com
[ Upstream commit c8de44b577eb540e8bfea55afe1d0904bb571b7a ]
Prevent schedule operations for adminq during device remove and when __IAVF_IN_REMOVE_TASK flag is set. Currently, the iavf_down function adds operations for adminq that shouldn't be processed when the device is in the __IAVF_REMOVE state.
Reproduction:
echo 4 > /sys/bus/pci/devices/0000:17:00.0/sriov_numvfs ip link set dev ens1f0 vf 0 trust on ip link set dev ens1f0 vf 1 trust on ip link set dev ens1f0 vf 2 trust on ip link set dev ens1f0 vf 3 trust on
ip link set dev ens1f0 vf 0 mac 00:22:33:44:55:66 ip link set dev ens1f0 vf 1 mac 00:22:33:44:55:67 ip link set dev ens1f0 vf 2 mac 00:22:33:44:55:68 ip link set dev ens1f0 vf 3 mac 00:22:33:44:55:69
echo 0000:17:02.0 > /sys/bus/pci/devices/0000:17:02.0/driver/unbind echo 0000:17:02.1 > /sys/bus/pci/devices/0000:17:02.1/driver/unbind echo 0000:17:02.2 > /sys/bus/pci/devices/0000:17:02.2/driver/unbind echo 0000:17:02.3 > /sys/bus/pci/devices/0000:17:02.3/driver/unbind sleep 10 echo 0000:17:02.0 > /sys/bus/pci/drivers/iavf/bind echo 0000:17:02.1 > /sys/bus/pci/drivers/iavf/bind echo 0000:17:02.2 > /sys/bus/pci/drivers/iavf/bind echo 0000:17:02.3 > /sys/bus/pci/drivers/iavf/bind
modprobe vfio-pci echo 8086 154c > /sys/bus/pci/drivers/vfio-pci/new_id
qemu-system-x86_64 -accel kvm -m 4096 -cpu host \ -drive file=centos9.qcow2,if=none,id=virtio-disk0 \ -device virtio-blk-pci,drive=virtio-disk0,bootindex=0 -smp 4 \ -device vfio-pci,host=17:02.0 -net none \ -device vfio-pci,host=17:02.1 -net none \ -device vfio-pci,host=17:02.2 -net none \ -device vfio-pci,host=17:02.3 -net none \ -daemonize -vnc :5
Current result: There is a probability that the mac of VF in guest is inconsistent with it in host
Expected result: When passthrough NIC VF to guest, the VF in guest should always get the same mac as it in host.
Fixes: 14756b2ae265 ("iavf: Fix __IAVF_RESETTING state usage") Signed-off-by: Radoslaw Tyl radoslawx.tyl@intel.com Tested-by: Rafal Romanowski rafal.romanowski@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/iavf/iavf_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index 22bc57ee24228..a02e8d6a4d1d6 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -1433,7 +1433,8 @@ void iavf_down(struct iavf_adapter *adapter) iavf_clear_fdir_filters(adapter); iavf_clear_adv_rss_conf(adapter);
- if (!(adapter->flags & IAVF_FLAG_PF_COMMS_FAILED)) { + if (!(adapter->flags & IAVF_FLAG_PF_COMMS_FAILED) && + !(test_bit(__IAVF_IN_REMOVE_TASK, &adapter->crit_section))) { /* cancel any current operation */ adapter->current_op = VIRTCHNL_OP_UNKNOWN; /* Schedule operations to close down the HW. Don't wait
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Ujfalusi peter.ujfalusi@linux.intel.com
[ Upstream commit 31bb7bd9ffee50d09ec931998b823a86132ab807 ]
All the fail paths during probe will free up the ops, on remove we should only free it if the probe was successful.
Fixes: bc433fd76fae ("ASoC: SOF: Add ops_free") Signed-off-by: Peter Ujfalusi peter.ujfalusi@linux.intel.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Rander Wang rander.wang@intel.com Link: https://lore.kernel.org/r/20230915124015.19637-1-peter.ujfalusi@linux.intel.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sof/core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/sound/soc/sof/core.c b/sound/soc/sof/core.c index 75a1e2c6539f2..eaa16755a2704 100644 --- a/sound/soc/sof/core.c +++ b/sound/soc/sof/core.c @@ -461,10 +461,9 @@ int snd_sof_device_remove(struct device *dev) snd_sof_ipc_free(sdev); snd_sof_free_debug(sdev); snd_sof_remove(sdev); + sof_ops_free(sdev); }
- sof_ops_free(sdev); - /* release firmware */ snd_sof_fw_unload(sdev);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Petr Oros poros@redhat.com
[ Upstream commit ed4cad33df9e272feaa6698b33359b29c2929564 ]
Add helper for set iavf aq request AVF_FLAG_AQ_* and immediately schedule watchdog_task. Helper will be used in cases where it is necessary to run aq requests asap
Signed-off-by: Petr Oros poros@redhat.com Co-developed-by: Michal Schmidt mschmidt@redhat.com Signed-off-by: Michal Schmidt mschmidt@redhat.com Co-developed-by: Ivan Vecera ivecera@redhat.com Signed-off-by: Ivan Vecera ivecera@redhat.com Reviewed-by: Simon Horman horms@kernel.org Tested-by: Rafal Romanowski rafal.romanowski@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Stable-dep-of: 5f3d319a2486 ("iavf: schedule a request immediately after add/delete vlan") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/iavf/iavf.h | 2 +- drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 2 +- drivers/net/ethernet/intel/iavf/iavf_main.c | 10 ++++------ 3 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf.h b/drivers/net/ethernet/intel/iavf/iavf.h index 543931c06bb17..06cfd567866c2 100644 --- a/drivers/net/ethernet/intel/iavf/iavf.h +++ b/drivers/net/ethernet/intel/iavf/iavf.h @@ -521,7 +521,7 @@ void iavf_down(struct iavf_adapter *adapter); int iavf_process_config(struct iavf_adapter *adapter); int iavf_parse_vf_resource_msg(struct iavf_adapter *adapter); void iavf_schedule_reset(struct iavf_adapter *adapter, u64 flags); -void iavf_schedule_request_stats(struct iavf_adapter *adapter); +void iavf_schedule_aq_request(struct iavf_adapter *adapter, u64 flags); void iavf_schedule_finish_config(struct iavf_adapter *adapter); void iavf_reset(struct iavf_adapter *adapter); void iavf_set_ethtool_ops(struct net_device *netdev); diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c index fe912b1c468ef..c13b4fa659ee9 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c +++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c @@ -362,7 +362,7 @@ static void iavf_get_ethtool_stats(struct net_device *netdev, unsigned int i;
/* Explicitly request stats refresh */ - iavf_schedule_request_stats(adapter); + iavf_schedule_aq_request(adapter, IAVF_FLAG_AQ_REQUEST_STATS);
iavf_add_ethtool_stats(&data, adapter, iavf_gstrings_stats);
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index a02e8d6a4d1d6..ee04670b77b33 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -322,15 +322,13 @@ void iavf_schedule_reset(struct iavf_adapter *adapter, u64 flags) }
/** - * iavf_schedule_request_stats - Set the flags and schedule statistics request + * iavf_schedule_aq_request - Set the flags and schedule aq request * @adapter: board private structure - * - * Sets IAVF_FLAG_AQ_REQUEST_STATS flag so iavf_watchdog_task() will explicitly - * request and refresh ethtool stats + * @flags: requested aq flags **/ -void iavf_schedule_request_stats(struct iavf_adapter *adapter) +void iavf_schedule_aq_request(struct iavf_adapter *adapter, u64 flags) { - adapter->aq_required |= IAVF_FLAG_AQ_REQUEST_STATS; + adapter->aq_required |= flags; mod_delayed_work(adapter->wq, &adapter->watchdog_task, 0); }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Petr Oros poros@redhat.com
[ Upstream commit 5f3d319a248654a805bafc9e7094bcea47dac6c7 ]
When the iavf driver wants to reconfigure the VLAN filters (iavf_add_vlan, iavf_del_vlan), it sets a flag in aq_required: adapter->aq_required |= IAVF_FLAG_AQ_ADD_VLAN_FILTER; or: adapter->aq_required |= IAVF_FLAG_AQ_DEL_VLAN_FILTER;
This is later processed by the watchdog_task, but it runs periodically every 2 seconds, so it can be a long time before it processes the request.
In the worst case, the interface is unable to receive traffic for more than 2 seconds for no objective reason.
Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Petr Oros poros@redhat.com Co-developed-by: Michal Schmidt mschmidt@redhat.com Signed-off-by: Michal Schmidt mschmidt@redhat.com Co-developed-by: Ivan Vecera ivecera@redhat.com Signed-off-by: Ivan Vecera ivecera@redhat.com Reviewed-by: Ahmed Zaki ahmed.zaki@intel.com Reviewed-by: Simon Horman horms@kernel.org Tested-by: Rafal Romanowski rafal.romanowski@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/iavf/iavf_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index ee04670b77b33..a39f7f0d6ab0b 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -829,7 +829,7 @@ iavf_vlan_filter *iavf_add_vlan(struct iavf_adapter *adapter, list_add_tail(&f->list, &adapter->vlan_filter_list); f->state = IAVF_VLAN_ADD; adapter->num_vlan_filters++; - adapter->aq_required |= IAVF_FLAG_AQ_ADD_VLAN_FILTER; + iavf_schedule_aq_request(adapter, IAVF_FLAG_AQ_ADD_VLAN_FILTER); }
clearout: @@ -851,7 +851,7 @@ static void iavf_del_vlan(struct iavf_adapter *adapter, struct iavf_vlan vlan) f = iavf_find_vlan(adapter, vlan); if (f) { f->state = IAVF_VLAN_REMOVE; - adapter->aq_required |= IAVF_FLAG_AQ_DEL_VLAN_FILTER; + iavf_schedule_aq_request(adapter, IAVF_FLAG_AQ_DEL_VLAN_FILTER); }
spin_unlock_bh(&adapter->mac_vlan_list_lock);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ivan Vecera ivecera@redhat.com
[ Upstream commit d0d362ffa33da4acdcf7aee2116ceef8c8fef658 ]
If port VLAN is configured on a VF then any other VLANs on top of this VF are broken.
During i40e_ndo_set_vf_port_vlan() call the i40e driver reset the VF and iavf driver asks PF (using VIRTCHNL_OP_GET_VF_RESOURCES) for VF capabilities but this reset occurs too early, prior setting of vf->info.pvid field and because this field can be zero during i40e_vc_get_vf_resources_msg() then VIRTCHNL_VF_OFFLOAD_VLAN capability is reported to iavf driver.
This is wrong because iavf driver should not report VLAN offloading capability when port VLAN is configured as i40e does not support QinQ offloading.
Fix the issue by moving VF reset after setting of vf->port_vlan_id field.
Without this patch: $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs $ ip link set enp2s0f0 vf 0 vlan 3 $ ip link set enp2s0f0v0 up $ ip link add link enp2s0f0v0 name vlan4 type vlan id 4 $ ip link set vlan4 up ... $ ethtool -k enp2s0f0v0 | grep vlan-offload rx-vlan-offload: on tx-vlan-offload: on $ dmesg -l err | grep iavf [1292500.742914] iavf 0000:02:02.0: Failed to add VLAN filter, error IAVF_ERR_INVALID_QP_ID
With this patch: $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs $ ip link set enp2s0f0 vf 0 vlan 3 $ ip link set enp2s0f0v0 up $ ip link add link enp2s0f0v0 name vlan4 type vlan id 4 $ ip link set vlan4 up ... $ ethtool -k enp2s0f0v0 | grep vlan-offload rx-vlan-offload: off [requested on] tx-vlan-offload: off [requested on] $ dmesg -l err | grep iavf
Fixes: f9b4b6278d51 ("i40e: Reset the VF upon conflicting VLAN configuration") Signed-off-by: Ivan Vecera ivecera@redhat.com Reviewed-by: Jesse Brandeburg jesse.brandeburg@intel.com Tested-by: Rafal Romanowski rafal.romanowski@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index cb7cf672f6971..547e67d9470b7 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -4397,9 +4397,7 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id, goto error_pvid;
i40e_vlan_stripping_enable(vsi); - i40e_vc_reset_vf(vf, true); - /* During reset the VF got a new VSI, so refresh a pointer. */ - vsi = pf->vsi[vf->lan_vsi_idx]; + /* Locked once because multiple functions below iterate list */ spin_lock_bh(&vsi->mac_filter_hash_lock);
@@ -4485,6 +4483,10 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id, */ vf->port_vlan_id = le16_to_cpu(vsi->info.pvid);
+ i40e_vc_reset_vf(vf, true); + /* During reset the VF got a new VSI, so refresh a pointer. */ + vsi = pf->vsi[vf->lan_vsi_idx]; + ret = i40e_config_vf_promiscuous_mode(vf, vsi->id, allmulti, alluni); if (ret) { dev_err(&pf->pdev->dev, "Unable to config vf promiscuous mode\n");
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Leoshkevich iii@linux.ibm.com
[ Upstream commit 837723b22a63cfbff584655b009b9d488d0e9087 ]
bpf_nf testcase fails on s390x: bpf_skb_ct_lookup() cannot find the entry that was added by bpf_ct_insert_entry() within the same BPF function.
The reason is that this entry is deleted by nf_ct_gc_expired().
The CT timeout starts ticking after the CT confirmation; therefore nf_conn.timeout is initially set to the timeout value, and __nf_conntrack_confirm() sets it to the deadline value.
bpf_ct_insert_entry() sets IPS_CONFIRMED_BIT, but does not adjust the timeout, making its value meaningless and causing false positives.
Fix the problem by making bpf_ct_insert_entry() adjust the timeout, like __nf_conntrack_confirm().
Fixes: 2cdaa3eefed8 ("netfilter: conntrack: restore IPS_CONFIRMED out of nf_conntrack_hash_check_insert()") Signed-off-by: Ilya Leoshkevich iii@linux.ibm.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Cc: Florian Westphal fw@strlen.de Link: https://lore.kernel.org/bpf/20230830011128.1415752-3-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_conntrack_bpf.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/net/netfilter/nf_conntrack_bpf.c b/net/netfilter/nf_conntrack_bpf.c index 8639e7efd0e22..816283f0aa593 100644 --- a/net/netfilter/nf_conntrack_bpf.c +++ b/net/netfilter/nf_conntrack_bpf.c @@ -384,6 +384,8 @@ struct nf_conn *bpf_ct_insert_entry(struct nf_conn___init *nfct_i) struct nf_conn *nfct = (struct nf_conn *)nfct_i; int err;
+ if (!nf_ct_is_confirmed(nfct)) + nfct->timeout += nfct_time_stamp; nfct->status |= IPS_CONFIRMED; err = nf_conntrack_hash_check_insert(nfct); if (err < 0) {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Christensen drc@linux.vnet.ibm.com
[ Upstream commit 8f6b846b0a86c3cbae8a25b772651cfc2270ad0a ]
The ionic device supports a maximum buffer length of 16 bits (see ionic_rxq_desc or ionic_rxq_sg_elem). When adding new buffers to the receive rings, the function ionic_rx_fill() uses 16bit math when calculating the number of pages to allocate for an RX descriptor, given the interface's MTU setting. If the system PAGE_SIZE >= 64KB, and the buf_info->page_offset is 0, the remain_len value will never decrement from the original MTU value and the frag_len value will always be 0, causing additional pages to be allocated as scatter- gather elements unnecessarily.
A similar math issue exists in ionic_rx_frags(), but no failures have been observed here since a 64KB page should not normally require any scatter-gather elements at any legal Ethernet MTU size.
Fixes: 4b0a7539a372 ("ionic: implement Rx page reuse") Signed-off-by: David Christensen drc@linux.vnet.ibm.com Reviewed-by: Shannon Nelson shannon.nelson@amd.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/pensando/ionic/ionic_dev.h | 1 + drivers/net/ethernet/pensando/ionic/ionic_txrx.c | 10 +++++++--- 2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_dev.h b/drivers/net/ethernet/pensando/ionic/ionic_dev.h index ad8a2a4453b76..93a4258421667 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_dev.h +++ b/drivers/net/ethernet/pensando/ionic/ionic_dev.h @@ -180,6 +180,7 @@ typedef void (*ionic_desc_cb)(struct ionic_queue *q, struct ionic_desc_info *desc_info, struct ionic_cq_info *cq_info, void *cb_arg);
+#define IONIC_MAX_BUF_LEN ((u16)-1) #define IONIC_PAGE_SIZE PAGE_SIZE #define IONIC_PAGE_SPLIT_SZ (PAGE_SIZE / 2) #define IONIC_PAGE_GFP_MASK (GFP_ATOMIC | __GFP_NOWARN |\ diff --git a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c index f8f5eb1307681..4684b9f194a68 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c @@ -207,7 +207,8 @@ static struct sk_buff *ionic_rx_frags(struct ionic_queue *q, return NULL; }
- frag_len = min_t(u16, len, IONIC_PAGE_SIZE - buf_info->page_offset); + frag_len = min_t(u16, len, min_t(u32, IONIC_MAX_BUF_LEN, + IONIC_PAGE_SIZE - buf_info->page_offset)); len -= frag_len;
dma_sync_single_for_cpu(dev, @@ -444,7 +445,8 @@ void ionic_rx_fill(struct ionic_queue *q)
/* fill main descriptor - buf[0] */ desc->addr = cpu_to_le64(buf_info->dma_addr + buf_info->page_offset); - frag_len = min_t(u16, len, IONIC_PAGE_SIZE - buf_info->page_offset); + frag_len = min_t(u16, len, min_t(u32, IONIC_MAX_BUF_LEN, + IONIC_PAGE_SIZE - buf_info->page_offset)); desc->len = cpu_to_le16(frag_len); remain_len -= frag_len; buf_info++; @@ -463,7 +465,9 @@ void ionic_rx_fill(struct ionic_queue *q) }
sg_elem->addr = cpu_to_le64(buf_info->dma_addr + buf_info->page_offset); - frag_len = min_t(u16, remain_len, IONIC_PAGE_SIZE - buf_info->page_offset); + frag_len = min_t(u16, remain_len, min_t(u32, IONIC_MAX_BUF_LEN, + IONIC_PAGE_SIZE - + buf_info->page_offset)); sg_elem->len = cpu_to_le16(frag_len); remain_len -= frag_len; buf_info++;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vinicius Costa Gomes vinicius.gomes@intel.com
[ Upstream commit cb47b1f679c4d83a5fa5f1852e472f844e41a3da ]
When an XDP redirect happens before the link is ready, that transmission will not finish and will timeout, causing an adapter reset. If the redirects do not stop, the adapter will not stop resetting.
Wait for the driver to signal that there's a carrier before allowing transmissions to proceed.
Previous code was relying that when __IGC_DOWN is cleared, the NIC is ready to transmit as all the queues are ready, what happens is that the carrier presence will only be signaled later, after the watchdog workqueue has a chance to run. And during this interval (between clearing __IGC_DOWN and the watchdog running) if any transmission happens the timeout is emitted (detected by igc_tx_timeout()) which causes the reset, with the potential for the infinite loop.
Fixes: 4ff320361092 ("igc: Add support for XDP_REDIRECT action") Reported-by: Ferenc Fejes ferenc.fejes@ericsson.com Closes: https://lore.kernel.org/netdev/0caf33cf6adb3a5bf137eeaa20e89b167c9986d5.came... Signed-off-by: Vinicius Costa Gomes vinicius.gomes@intel.com Tested-by: Ferenc Fejes ferenc.fejes@ericsson.com Reviewed-by: Maciej Fijalkowski maciej.fijalkowski@intel.com Tested-by: Naama Meir naamax.meir@linux.intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/igc/igc_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 2f3947cf513bd..1ac836a55cd31 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -6322,7 +6322,7 @@ static int igc_xdp_xmit(struct net_device *dev, int num_frames, struct igc_ring *ring; int i, drops;
- if (unlikely(test_bit(__IGC_DOWN, &adapter->state))) + if (unlikely(!netif_carrier_ok(dev))) return -ENETDOWN;
if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kyle Zeng zengyhkyle@gmail.com
[ Upstream commit 0113d9c9d1ccc07f5a3710dac4aa24b6d711278c ]
Currently, we assume the skb is associated with a device before calling __ip_options_compile, which is not always the case if it is re-routed by ipvs. When skb->dev is NULL, dev_net(skb->dev) will become null-dereference. This patch adds a check for the edge case and switch to use the net_device from the rtable when skb->dev is NULL.
Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Suggested-by: David Ahern dsahern@kernel.org Signed-off-by: Kyle Zeng zengyhkyle@gmail.com Cc: Stephen Suryaputra ssuryaextr@gmail.com Cc: Vadim Fedorenko vfedorenko@novek.ru Reviewed-by: David Ahern dsahern@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/route.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c index a04ffc128e22b..84a0a71a6f4e7 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1213,6 +1213,7 @@ EXPORT_INDIRECT_CALLABLE(ipv4_dst_check);
static void ipv4_send_dest_unreach(struct sk_buff *skb) { + struct net_device *dev; struct ip_options opt; int res;
@@ -1230,7 +1231,8 @@ static void ipv4_send_dest_unreach(struct sk_buff *skb) opt.optlen = ip_hdr(skb)->ihl * 4 - sizeof(struct iphdr);
rcu_read_lock(); - res = __ip_options_compile(dev_net(skb->dev), &opt, skb, NULL); + dev = skb->dev ? skb->dev : skb_rtable(skb)->dst.dev; + res = __ip_options_compile(dev_net(dev), &opt, skb, NULL); rcu_read_unlock();
if (res)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet edumazet@google.com
[ Upstream commit f4f82c52a0ead5ab363d207d06f81b967d09ffb8 ]
Nothing prevents iscsi_sw_tcp_conn_bind() to receive file descriptor pointing to non TCP socket (af_unix for example).
Return -EINVAL if this is attempted, instead of crashing the kernel.
Fixes: 7ba247138907 ("[SCSI] open-iscsi/linux-iscsi-5 Initiator: Initiator code") Signed-off-by: Eric Dumazet edumazet@google.com Cc: Lee Duncan lduncan@suse.com Cc: Chris Leech cleech@redhat.com Cc: Mike Christie michael.christie@oracle.com Cc: "James E.J. Bottomley" jejb@linux.ibm.com Cc: "Martin K. Petersen" martin.petersen@oracle.com Cc: open-iscsi@googlegroups.com Cc: linux-scsi@vger.kernel.org Reviewed-by: Mike Christie michael.christie@oracle.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/iscsi_tcp.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 8009eab3b7bee..56ade46309707 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -724,6 +724,10 @@ iscsi_sw_tcp_conn_bind(struct iscsi_cls_session *cls_session, return -EEXIST; }
+ err = -EINVAL; + if (!sk_is_tcp(sock->sk)) + goto free_socket; + err = iscsi_conn_bind(cls_session, cls_conn, is_leading); if (err) goto free_socket;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kajol Jain kjain@linux.ibm.com
[ Upstream commit 4ff3ba4db5943cac1045e3e4a3c0463ea10f6930 ]
Valid domain value is in range 1 to HV_PERF_DOMAIN_MAX. Current code has check for domain value greater than or equal to HV_PERF_DOMAIN_MAX. But the check for domain value 0 is missing.
Fix this issue by adding check for domain value 0.
Before: # ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1 Using CPUID 00800200 Control descriptor is not initialized Error: The sys_perf_event_open() syscall returned with 5 (Input/output error) for event (hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/). /bin/dmesg | grep -i perf may provide additional information.
Result from dmesg: [ 37.819387] hv-24x7: hcall failed: [0 0x60040000 0x100 0] => ret 0xfffffffffffffffc (-4) detail=0x2000000 failing ix=0
After: # ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1 Using CPUID 00800200 Control descriptor is not initialized Warning: hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ event is not supported by the kernel. failed to read counter hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/
Fixes: ebd4a5a3ebd9 ("powerpc/perf/hv-24x7: Minor improvements") Reported-by: Krishan Gopal Sarawast krishang@linux.vnet.ibm.com Signed-off-by: Kajol Jain kjain@linux.ibm.com Tested-by: Disha Goel disgoel@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://msgid.link/20230825055601.360083-1-kjain@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/perf/hv-24x7.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c index 33c23225fd545..7dda59923ed6a 100644 --- a/arch/powerpc/perf/hv-24x7.c +++ b/arch/powerpc/perf/hv-24x7.c @@ -1431,7 +1431,7 @@ static int h_24x7_event_init(struct perf_event *event) }
domain = event_get_domain(event); - if (domain >= HV_PERF_DOMAIN_MAX) { + if (domain == 0 || domain >= HV_PERF_DOMAIN_MAX) { pr_devel("invalid domain %d\n", domain); return -EINVAL; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet edumazet@google.com
[ Upstream commit 6af289746a636f71f4c0535a9801774118486c7a ]
dh->dccph_x is the 9th byte (offset 8) in "struct dccp_hdr", not in the "byte 7" as Jann claimed.
We need to make sure the ICMP messages are big enough, using more standard ways (no more assumptions).
syzbot reported: BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2667 [inline] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2681 [inline] BUG: KMSAN: uninit-value in dccp_v6_err+0x426/0x1aa0 net/dccp/ipv6.c:94 pskb_may_pull_reason include/linux/skbuff.h:2667 [inline] pskb_may_pull include/linux/skbuff.h:2681 [inline] dccp_v6_err+0x426/0x1aa0 net/dccp/ipv6.c:94 icmpv6_notify+0x4c7/0x880 net/ipv6/icmp.c:867 icmpv6_rcv+0x19d5/0x30d0 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:304 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:304 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5523 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637 netif_receive_skb_internal net/core/dev.c:5723 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5782 tun_rx_batched+0x83b/0x920 tun_get_user+0x564c/0x6940 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:1985 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x15c0 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6313 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2795 tun_alloc_skb drivers/net/tun.c:1531 [inline] tun_get_user+0x23cf/0x6940 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:1985 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x15c0 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd
CPU: 0 PID: 4995 Comm: syz-executor153 Not tainted 6.6.0-rc1-syzkaller-00014-ga747acc0b752 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
Fixes: 977ad86c2a1b ("dccp: Fix out of bounds access in DCCP error handler") Reported-by: syzbot syzkaller@googlegroups.com Signed-off-by: Eric Dumazet edumazet@google.com Cc: Jann Horn jannh@google.com Reviewed-by: Jann Horn jannh@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/dccp/ipv4.c | 9 ++------- net/dccp/ipv6.c | 9 ++------- 2 files changed, 4 insertions(+), 14 deletions(-)
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index 8f5d3c0881118..247179d4c8865 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -255,13 +255,8 @@ static int dccp_v4_err(struct sk_buff *skb, u32 info) int err; struct net *net = dev_net(skb->dev);
- /* For the first __dccp_basic_hdr_len() check, we only need dh->dccph_x, - * which is in byte 7 of the dccp header. - * Our caller (icmp_socket_deliver()) already pulled 8 bytes for us. - * - * Later on, we want to access the sequence number fields, which are - * beyond 8 bytes, so we have to pskb_may_pull() ourselves. - */ + if (!pskb_may_pull(skb, offset + sizeof(*dh))) + return -EINVAL; dh = (struct dccp_hdr *)(skb->data + offset); if (!pskb_may_pull(skb, offset + __dccp_basic_hdr_len(dh))) return -EINVAL; diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 2b09e2644b13f..6fb34eaf1237a 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -83,13 +83,8 @@ static int dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, __u64 seq; struct net *net = dev_net(skb->dev);
- /* For the first __dccp_basic_hdr_len() check, we only need dh->dccph_x, - * which is in byte 7 of the dccp header. - * Our caller (icmpv6_notify()) already pulled 8 bytes for us. - * - * Later on, we want to access the sequence number fields, which are - * beyond 8 bytes, so we have to pskb_may_pull() ourselves. - */ + if (!pskb_may_pull(skb, offset + sizeof(*dh))) + return -EINVAL; dh = (struct dccp_hdr *)(skb->data + offset); if (!pskb_may_pull(skb, offset + __dccp_basic_hdr_len(dh))) return -EINVAL;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rik van Riel riel@surriel.com
[ Upstream commit 34cf99c250d5cd2530b93a57b0de31d3aaf8685b ]
The code calling ima_free_kexec_buffer() runs long after the memblock allocator has already been torn down, potentially resulting in a use after free in memblock_isolate_range().
With KASAN or KFENCE, this use after free will result in a BUG from the idle task, and a subsequent kernel panic.
Switch ima_free_kexec_buffer() over to memblock_free_late() to avoid that bug.
Fixes: fee3ff99bc67 ("powerpc: Move arch independent ima kexec functions to drivers/of/kexec.c") Suggested-by: Mike Rappoport rppt@kernel.org Signed-off-by: Rik van Riel riel@surriel.com Signed-off-by: Ingo Molnar mingo@kernel.org Link: https://lore.kernel.org/r/20230817135558.67274c83@imladris.surriel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/setup.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 892609cde4a20..804a252382da7 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -363,15 +363,11 @@ static void __init add_early_ima_buffer(u64 phys_addr) #if defined(CONFIG_HAVE_IMA_KEXEC) && !defined(CONFIG_OF_FLATTREE) int __init ima_free_kexec_buffer(void) { - int rc; - if (!ima_kexec_buffer_size) return -ENOENT;
- rc = memblock_phys_free(ima_kexec_buffer_phys, - ima_kexec_buffer_size); - if (rc) - return rc; + memblock_free_late(ima_kexec_buffer_phys, + ima_kexec_buffer_size);
ima_kexec_buffer_phys = 0; ima_kexec_buffer_size = 0;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukasz Majewski lukma@denx.de
[ Upstream commit 295de650d3aaf9e50258465c5f1c84b465d836f6 ]
While adding support for parsing the redbox supervision frames, the author added `pull_size' and `total_pull_size' to track the amount of bytes that were pulled from the skb during while parsing the skb so it can be reverted/ pushed back at the end. In the process probably copy&paste error occurred and for the HSRv1 case the ethhdr was used instead of the hsr_tag. Later the hsr_tag was used instead of hsr_sup_tag. The later error didn't matter because both structs have the size so HSRv0 was still working. It broke however HSRv1 parsing because struct ethhdr is larger than struct hsr_tag.
Reinstate the old pulling flow and pull first ethhdr, hsr_tag in v1 case followed by hsr_sup_tag.
[bigeasy: commit message]
Fixes: eafaa88b3eb7 ("net: hsr: Add support for redbox supervision frames")' Suggested-by: Tristram.Ha@microchip.com Signed-off-by: Lukasz Majewski lukma@denx.de Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Reviewed-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/hsr/hsr_framereg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/hsr/hsr_framereg.c b/net/hsr/hsr_framereg.c index a16f0445023aa..0b01998780952 100644 --- a/net/hsr/hsr_framereg.c +++ b/net/hsr/hsr_framereg.c @@ -295,13 +295,13 @@ void hsr_handle_sup_frame(struct hsr_frame_info *frame)
/* And leave the HSR tag. */ if (ethhdr->h_proto == htons(ETH_P_HSR)) { - pull_size = sizeof(struct ethhdr); + pull_size = sizeof(struct hsr_tag); skb_pull(skb, pull_size); total_pull_size += pull_size; }
/* And leave the HSR sup tag. */ - pull_size = sizeof(struct hsr_tag); + pull_size = sizeof(struct hsr_sup_tag); skb_pull(skb, pull_size); total_pull_size += pull_size;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Boyd swboyd@chromium.org
[ Upstream commit e0b4ab3bb92bda8d12f55842614362989d5b2cb3 ]
It's possible for the polling loop in busy_loop() to get scheduled away for a long time.
status = ipc_read_status(scu); // status = IPC_STATUS_BUSY <long time scheduled away> if (!(status & IPC_STATUS_BUSY))
If this happens, then the status bit could change while the task is scheduled away and this function would never read the status again after timing out. Instead, the function will return -ETIMEDOUT when it's possible that scheduling didn't work out and the status bit was cleared. Bit polling code should always check the bit being polled one more time after the timeout in case this happens.
Fix this by reading the status once more after the while loop breaks. The readl_poll_timeout() macro implements all of this, and it is shorter, so use that macro here to consolidate code and fix this.
There were some concerns with using readl_poll_timeout() because it uses timekeeping, and timekeeping isn't running early on or during the late stages of system suspend or early stages of system resume, but an audit of the code concluded that this code isn't called during those times so it is safe to use the macro.
Cc: Prashant Malani pmalani@chromium.org Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Reviewed-by: Mika Westerberg mika.westerberg@linux.intel.com Reviewed-by: Kuppuswamy Sathyanarayanan sathyanarayanan.kuppuswamy@linux.intel.com Fixes: e7b7ab3847c9 ("platform/x86: intel_scu_ipc: Sleeping is fine when polling") Signed-off-by: Stephen Boyd swboyd@chromium.org Link: https://lore.kernel.org/r/20230913212723.3055315-2-swboyd@chromium.org Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/intel_scu_ipc.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index e7a3e34028178..96675bea88b10 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/module.h> #include <linux/slab.h>
@@ -232,19 +233,15 @@ static inline u32 ipc_data_readl(struct intel_scu_ipc_dev *scu, u32 offset) /* Wait till scu status is busy */ static inline int busy_loop(struct intel_scu_ipc_dev *scu) { - unsigned long end = jiffies + IPC_TIMEOUT; - - do { - u32 status; - - status = ipc_read_status(scu); - if (!(status & IPC_STATUS_BUSY)) - return (status & IPC_STATUS_ERR) ? -EIO : 0; + u8 status; + int err;
- usleep_range(50, 100); - } while (time_before(jiffies, end)); + err = readx_poll_timeout(ipc_read_status, scu, status, !(status & IPC_STATUS_BUSY), + 100, jiffies_to_usecs(IPC_TIMEOUT)); + if (err) + return err;
- return -ETIMEDOUT; + return (status & IPC_STATUS_ERR) ? -EIO : 0; }
/* Wait till ipc ioc interrupt is received or timeout in 10 HZ */
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Boyd swboyd@chromium.org
[ Upstream commit 427fada620733e6474d783ae6037a66eae42bf8c ]
It's possible for the completion in ipc_wait_for_interrupt() to timeout, simply because the interrupt was delayed in being processed. A timeout in itself is not an error. This driver should check the status register upon a timeout to ensure that scheduling or interrupt processing delays don't affect the outcome of the IPC return value.
CPU0 SCU ---- --- ipc_wait_for_interrupt() wait_for_completion_timeout(&scu->cmd_complete) [TIMEOUT] status[IPC_STATUS_BUSY]=0
Fix this problem by reading the status bit in all cases, regardless of the timeout. If the completion times out, we'll assume the problem was that the IPC_STATUS_BUSY bit was still set, but if the status bit is cleared in the meantime we know that we hit some scheduling delay and we should just check the error bit.
Cc: Prashant Malani pmalani@chromium.org Reviewed-by: Kuppuswamy Sathyanarayanan sathyanarayanan.kuppuswamy@linux.intel.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Reviewed-by: Mika Westerberg mika.westerberg@linux.intel.com Fixes: ed12f295bfd5 ("ipc: Added support for IPC interrupt mode") Signed-off-by: Stephen Boyd swboyd@chromium.org Link: https://lore.kernel.org/r/20230913212723.3055315-3-swboyd@chromium.org Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/intel_scu_ipc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index 96675bea88b10..be97cfae4b0f3 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -249,10 +249,12 @@ static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu) { int status;
- if (!wait_for_completion_timeout(&scu->cmd_complete, IPC_TIMEOUT)) - return -ETIMEDOUT; + wait_for_completion_timeout(&scu->cmd_complete, IPC_TIMEOUT);
status = ipc_read_status(scu); + if (status & IPC_STATUS_BUSY) + return -ETIMEDOUT; + if (status & IPC_STATUS_ERR) return -EIO;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Boyd swboyd@chromium.org
[ Upstream commit efce78584e583226e9a1f6cb2fb555d6ff47c3e7 ]
Andy discovered this bug during patch review. The 'scu' argument to this function shouldn't be overridden by the function itself. It doesn't make any sense. Looking at the commit history, we see that commit f57fa18583f5 ("platform/x86: intel_scu_ipc: Introduce new SCU IPC API") removed the setting of the scu to ipcdev in other functions, but not this one. That was an oversight. Remove this line so that we stop overriding the scu instance that is used by this function.
Reported-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Closes: https://lore.kernel.org/r/ZPjdZ3xNmBEBvNiS@smile.fi.intel.com Cc: Prashant Malani pmalani@chromium.org Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Reviewed-by: Mika Westerberg mika.westerberg@linux.intel.com Fixes: f57fa18583f5 ("platform/x86: intel_scu_ipc: Introduce new SCU IPC API") Signed-off-by: Stephen Boyd swboyd@chromium.org Link: https://lore.kernel.org/r/20230913212723.3055315-4-swboyd@chromium.org Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/intel_scu_ipc.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index be97cfae4b0f3..dfe010f1ee084 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -444,7 +444,6 @@ int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd, mutex_unlock(&ipclock); return -ENODEV; } - scu = ipcdev; cmdval = sub << 12 | cmd; ipc_command(scu, cmdval); err = intel_scu_ipc_check_status(scu);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Boyd swboyd@chromium.org
[ Upstream commit 85e654c9f722853a595fa941dca60c157b707b86 ]
It's possible for interrupts to get significantly delayed to the point that callers of intel_scu_ipc_dev_command() and friends can call the function once, hit a timeout, and call it again while the interrupt still hasn't been processed. This driver will get seriously confused if the interrupt is finally processed after the second IPC has been sent with ipc_command(). It won't know which IPC has been completed. This could be quite disastrous if calling code assumes something has happened upon return from intel_scu_ipc_dev_simple_command() when it actually hasn't.
Let's avoid this scenario by simply returning -EBUSY in this case. Hopefully higher layers will know to back off or fail gracefully when this happens. It's all highly unlikely anyway, but it's better to be correct here as we have no way to know which IPC the status register is telling us about if we send a second IPC while the previous IPC is still processing.
Cc: Prashant Malani pmalani@chromium.org Cc: Kuppuswamy Sathyanarayanan sathyanarayanan.kuppuswamy@linux.intel.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Reviewed-by: Mika Westerberg mika.westerberg@linux.intel.com Fixes: ed12f295bfd5 ("ipc: Added support for IPC interrupt mode") Signed-off-by: Stephen Boyd swboyd@chromium.org Link: https://lore.kernel.org/r/20230913212723.3055315-5-swboyd@chromium.org Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/intel_scu_ipc.c | 40 +++++++++++++++++++--------- 1 file changed, 28 insertions(+), 12 deletions(-)
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index dfe010f1ee084..189c5460edd81 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -266,6 +266,24 @@ static int intel_scu_ipc_check_status(struct intel_scu_ipc_dev *scu) return scu->irq > 0 ? ipc_wait_for_interrupt(scu) : busy_loop(scu); }
+static struct intel_scu_ipc_dev *intel_scu_ipc_get(struct intel_scu_ipc_dev *scu) +{ + u8 status; + + if (!scu) + scu = ipcdev; + if (!scu) + return ERR_PTR(-ENODEV); + + status = ipc_read_status(scu); + if (status & IPC_STATUS_BUSY) { + dev_dbg(&scu->dev, "device is busy\n"); + return ERR_PTR(-EBUSY); + } + + return scu; +} + /* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */ static int pwr_reg_rdwr(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data, u32 count, u32 op, u32 id) @@ -279,11 +297,10 @@ static int pwr_reg_rdwr(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data, memset(cbuf, 0, sizeof(cbuf));
mutex_lock(&ipclock); - if (!scu) - scu = ipcdev; - if (!scu) { + scu = intel_scu_ipc_get(scu); + if (IS_ERR(scu)) { mutex_unlock(&ipclock); - return -ENODEV; + return PTR_ERR(scu); }
for (nc = 0; nc < count; nc++, offset += 2) { @@ -438,12 +455,12 @@ int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd, int err;
mutex_lock(&ipclock); - if (!scu) - scu = ipcdev; - if (!scu) { + scu = intel_scu_ipc_get(scu); + if (IS_ERR(scu)) { mutex_unlock(&ipclock); - return -ENODEV; + return PTR_ERR(scu); } + cmdval = sub << 12 | cmd; ipc_command(scu, cmdval); err = intel_scu_ipc_check_status(scu); @@ -483,11 +500,10 @@ int intel_scu_ipc_dev_command_with_size(struct intel_scu_ipc_dev *scu, int cmd, return -EINVAL;
mutex_lock(&ipclock); - if (!scu) - scu = ipcdev; - if (!scu) { + scu = intel_scu_ipc_get(scu); + if (IS_ERR(scu)) { mutex_unlock(&ipclock); - return -ENODEV; + return PTR_ERR(scu); }
memcpy(inbuf, in, inlen);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Poimboeuf jpoimboe@kernel.org
[ Upstream commit a8cf700c17d9ca6cb8ee7dc5c9330dbac3948237 ]
Reading the 'spec_rstack_overflow' sysfs file can trigger an unnecessary MSR write, and possibly even a (handled) exception if the microcode hasn't been updated.
Avoid all that by just checking X86_FEATURE_IBPB_BRTYPE instead, which gets set by srso_select_mitigation() if the updated microcode exists.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation") Signed-off-by: Josh Poimboeuf jpoimboe@kernel.org Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Borislav Petkov (AMD) bp@alien8.de Reviewed-by: Nikolay Borisov nik.borisov@suse.com Acked-by: Borislav Petkov (AMD) bp@alien8.de Link: https://lore.kernel.org/r/27d128899cb8aee9eb2b57ddc996742b0c1d776b.169388998... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/cpu/bugs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 3a893ab398a01..5f38d60532a99 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -2692,7 +2692,7 @@ static ssize_t srso_show_state(char *buf)
return sysfs_emit(buf, "%s%s\n", srso_strings[srso_mitigation], - (cpu_has_ibpb_brtype_microcode() ? "" : ", no microcode")); + boot_cpu_has(X86_FEATURE_IBPB_BRTYPE) ? "" : ", no microcode"); }
static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Poimboeuf jpoimboe@kernel.org
[ Upstream commit 01b057b2f4cc2d905a0bd92195657dbd9a7005ab ]
If the user has requested no SRSO mitigation, other mitigations can use the lighter-weight SBPB instead of IBPB.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation") Signed-off-by: Josh Poimboeuf jpoimboe@kernel.org Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Borislav Petkov (AMD) bp@alien8.de Acked-by: Borislav Petkov (AMD) bp@alien8.de Link: https://lore.kernel.org/r/b20820c3cfd1003171135ec8d762a0b957348497.169388998... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/cpu/bugs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 5f38d60532a99..263df737d5cd5 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -2414,7 +2414,7 @@ static void __init srso_select_mitigation(void)
switch (srso_cmd) { case SRSO_CMD_OFF: - return; + goto pred_cmd;
case SRSO_CMD_MICROCODE: if (has_microcode) {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jie Wang wangjie125@huawei.com
[ Upstream commit bd3caddf299a640efb66c6022efed7fe744db626 ]
When the vf cmdq is disabled, there is no need to keep these task running. So this patch skip these task when the cmdq is disabled.
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Signed-off-by: Jie Wang wangjie125@huawei.com Signed-off-by: Jijie Shao shaojijie@huawei.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index b1b14850e958f..72cf5145e15a2 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -1909,7 +1909,8 @@ static void hclgevf_periodic_service_task(struct hclgevf_dev *hdev) unsigned long delta = round_jiffies_relative(HZ); struct hnae3_handle *handle = &hdev->nic;
- if (test_bit(HCLGEVF_STATE_RST_FAIL, &hdev->state)) + if (test_bit(HCLGEVF_STATE_RST_FAIL, &hdev->state) || + test_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state)) return;
if (time_is_after_jiffies(hdev->last_serv_processed + HZ)) {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jie Wang wangjie125@huawei.com
[ Upstream commit f9f651261130cdcb7adc9a3e365b356bc2749ab3 ]
The device_version V3 hardware can't offload the checksum for IP in GRE packets, but can do it for NvGRE. So default to disable the checksum and GSO offload for GRE, but keep the ability to enable it when only using NvGRE.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jie Wang wangjie125@huawei.com Signed-off-by: Jijie Shao shaojijie@huawei.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 8aae179554a81..04c9baca1b0f8 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -3352,6 +3352,15 @@ static void hns3_set_default_feature(struct net_device *netdev) NETIF_F_HW_TC);
netdev->hw_enc_features |= netdev->vlan_features | NETIF_F_TSO_MANGLEID; + + /* The device_version V3 hardware can't offload the checksum for IP in + * GRE packets, but can do it for NvGRE. So default to disable the + * checksum and GSO offload for GRE. + */ + if (ae_dev->dev_version > HNAE3_DEVICE_VERSION_V2) { + netdev->features &= ~NETIF_F_GSO_GRE; + netdev->features &= ~NETIF_F_GSO_GRE_CSUM; + } }
static int hns3_alloc_buffer(struct hns3_enet_ring *ring,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jian Shen shenjian15@huawei.com
[ Upstream commit f2ed304922a55690529bcca59678dd92d7466ce8 ]
Currently, the driver will enable unicast promisc for the function once configure mac address fail. It's unreasonable when the failure is caused by using same mac address with other functions. So only enable unicast promisc when mac table full.
Fixes: c631c696823c ("net: hns3: refactor the promisc mode setting") Signed-off-by: Jian Shen shenjian15@huawei.com Signed-off-by: Jijie Shao shaojijie@huawei.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 884e45fb6b72e..a8019eac2b33e 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -8930,7 +8930,7 @@ static void hclge_update_overflow_flags(struct hclge_vport *vport, if (mac_type == HCLGE_MAC_ADDR_UC) { if (is_all_added) vport->overflow_promisc_flags &= ~HNAE3_OVERFLOW_UPE; - else + else if (hclge_is_umv_space_full(vport, true)) vport->overflow_promisc_flags |= HNAE3_OVERFLOW_UPE; } else { if (is_all_added)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jijie Shao shaojijie@huawei.com
[ Upstream commit 1a7be66e4685b8541546222c305cce9710718a88 ]
Firmware does not respond driver commands during reset Therefore, rule will fail to delete while the firmware is resetting
So, if failed to delete rule, set rule state to TO_DEL, and the rule will be deleted when periodic task being scheduled.
Fixes: 0205ec041ec6 ("net: hns3: add support for hw tc offload of tc flower") Signed-off-by: Jijie Shao shaojijie@huawei.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index a8019eac2b33e..e44c5076262ba 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -7454,6 +7454,12 @@ static int hclge_del_cls_flower(struct hnae3_handle *handle, ret = hclge_fd_tcam_config(hdev, HCLGE_FD_STAGE_1, true, rule->location, NULL, false); if (ret) { + /* if tcam config fail, set rule state to TO_DEL, + * so the rule will be deleted when periodic + * task being scheduled. + */ + hclge_update_fd_list(hdev, HCLGE_FD_TO_DEL, rule->location, NULL); + set_bit(HCLGE_STATE_FD_TBL_CHANGED, &hdev->state); spin_unlock_bh(&hdev->fd_rule_lock); return ret; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jie Wang wangjie125@huawei.com
[ Upstream commit 0770063096d5da4a8e467b6e73c1646a75589628 ]
Currently the reset process in hns3 and firmware watchdog init process is asynchronous. we think firmware watchdog initialization is completed before hns3 clear the firmware interrupt source. However, firmware initialization may not complete early.
so we add delay before hns3 clear firmware interrupt source and 5 ms delay is enough to avoid second firmware reset interrupt.
Fixes: c1a81619d73a ("net: hns3: Add mailbox interrupt handling to PF driver") Signed-off-by: Jie Wang wangjie125@huawei.com Signed-off-by: Jijie Shao shaojijie@huawei.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index e44c5076262ba..3e1d202d60ce1 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -3662,9 +3662,14 @@ static u32 hclge_check_event_cause(struct hclge_dev *hdev, u32 *clearval) static void hclge_clear_event_cause(struct hclge_dev *hdev, u32 event_type, u32 regclr) { +#define HCLGE_IMP_RESET_DELAY 5 + switch (event_type) { case HCLGE_VECTOR0_EVENT_PTP: case HCLGE_VECTOR0_EVENT_RST: + if (regclr == BIT(HCLGE_VECTOR0_IMPRESET_INT_B)) + mdelay(HCLGE_IMP_RESET_DELAY); + hclge_write_dev(&hdev->hw, HCLGE_MISC_RESET_STS_REG, regclr); break; case HCLGE_VECTOR0_EVENT_MBX:
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet edumazet@google.com
[ Upstream commit 44bdb313da57322c9b3c108eb66981c6ec6509f4 ]
syzbot/KCSAN reported data-races in br_handle_frame_finish() [1] This function can run from multiple cpus without mutual exclusion.
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
Handles updates to dev->stats.tx_dropped while we are at it.
[1] BUG: KCSAN: data-race in br_handle_frame_finish / br_handle_frame_finish
read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 1: br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189 br_nf_hook_thresh+0x1ed/0x220 br_nf_pre_routing_finish_ipv6+0x50f/0x540 NF_HOOK include/linux/netfilter.h:304 [inline] br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178 br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508 nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline] nf_hook_bridge_pre net/bridge/br_input.c:272 [inline] br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417 __netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417 __netif_receive_skb_one_core net/core/dev.c:5521 [inline] __netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637 process_backlog+0x21f/0x380 net/core/dev.c:5965 __napi_poll+0x60/0x3b0 net/core/dev.c:6527 napi_poll net/core/dev.c:6594 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6727 __do_softirq+0xc1/0x265 kernel/softirq.c:553 run_ksoftirqd+0x17/0x20 kernel/softirq.c:921 smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164 kthread+0x1d7/0x210 kernel/kthread.c:388 ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 0: br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189 br_nf_hook_thresh+0x1ed/0x220 br_nf_pre_routing_finish_ipv6+0x50f/0x540 NF_HOOK include/linux/netfilter.h:304 [inline] br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178 br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508 nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline] nf_hook_bridge_pre net/bridge/br_input.c:272 [inline] br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417 __netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417 __netif_receive_skb_one_core net/core/dev.c:5521 [inline] __netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637 process_backlog+0x21f/0x380 net/core/dev.c:5965 __napi_poll+0x60/0x3b0 net/core/dev.c:6527 napi_poll net/core/dev.c:6594 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6727 __do_softirq+0xc1/0x265 kernel/softirq.c:553 do_softirq+0x5e/0x90 kernel/softirq.c:454 __local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] batadv_tt_local_purge+0x1a8/0x1f0 net/batman-adv/translation-table.c:1356 batadv_tt_purge+0x2b/0x630 net/batman-adv/translation-table.c:3560 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703 worker_thread+0x525/0x730 kernel/workqueue.c:2784 kthread+0x1d7/0x210 kernel/kthread.c:388 ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
value changed: 0x00000000000d7190 -> 0x00000000000d7191
Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 14848 Comm: kworker/u4:11 Not tainted 6.6.0-rc1-syzkaller-00236-gad8a69f361b9 #0
Fixes: 1c29fc4989bc ("[BRIDGE]: keep track of received multicast packets") Reported-by: syzbot syzkaller@googlegroups.com Signed-off-by: Eric Dumazet edumazet@google.com Cc: Roopa Prabhu roopa@nvidia.com Cc: Nikolay Aleksandrov razor@blackwall.org Cc: bridge@lists.linux-foundation.org Acked-by: Nikolay Aleksandrov razor@blackwall.org Link: https://lore.kernel.org/r/20230918091351.1356153-1-edumazet@google.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/bridge/br_forward.c | 4 ++-- net/bridge/br_input.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c index bd54f17e3c3d8..4e3394a7d7d45 100644 --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -124,7 +124,7 @@ static int deliver_clone(const struct net_bridge_port *prev,
skb = skb_clone(skb, GFP_ATOMIC); if (!skb) { - dev->stats.tx_dropped++; + DEV_STATS_INC(dev, tx_dropped); return -ENOMEM; }
@@ -263,7 +263,7 @@ static void maybe_deliver_addr(struct net_bridge_port *p, struct sk_buff *skb,
skb = skb_copy(skb, GFP_ATOMIC); if (!skb) { - dev->stats.tx_dropped++; + DEV_STATS_INC(dev, tx_dropped); return; }
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c index 68b3e850bcb9d..6bb272894c960 100644 --- a/net/bridge/br_input.c +++ b/net/bridge/br_input.c @@ -164,12 +164,12 @@ int br_handle_frame_finish(struct net *net, struct sock *sk, struct sk_buff *skb if ((mdst && mdst->host_joined) || br_multicast_is_router(brmctx, skb)) { local_rcv = true; - br->dev->stats.multicast++; + DEV_STATS_INC(br->dev, multicast); } mcast_hit = true; } else { local_rcv = true; - br->dev->stats.multicast++; + DEV_STATS_INC(br->dev, multicast); } break; case BR_PKT_UNICAST:
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ziyang Xuan william.xuanziyang@huawei.com
[ Upstream commit 492032760127251e5540a5716a70996bacf2a3fd ]
Get a null-ptr-deref bug as follows with reproducer [1].
BUG: kernel NULL pointer dereference, address: 0000000000000228 ... RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q] ... Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x150 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? vlan_dev_hard_header+0x35/0x140 [8021q] ? vlan_dev_hard_header+0x8e/0x140 [8021q] neigh_connected_output+0xb2/0x100 ip6_finish_output2+0x1cb/0x520 ? nf_hook_slow+0x43/0xc0 ? ip6_mtu+0x46/0x80 ip6_finish_output+0x2a/0xb0 mld_sendpack+0x18f/0x250 mld_ifc_work+0x39/0x160 process_one_work+0x1e6/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30
[1] $ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}' $ ip link add name t-dummy type dummy $ ip link add link t-dummy name t-dummy.100 type vlan id 100 $ ip link add name t-nlmon type nlmon $ ip link set t-nlmon master team0 $ ip link set t-nlmon nomaster $ ip link set t-dummy up $ ip link set team0 up $ ip link set t-dummy.100 down $ ip link set t-dummy.100 master team0
When enslave a vlan device to team device and team device type is changed from non-ether to ether, header_ops of team device is changed to vlan_header_ops. That is incorrect and will trigger null-ptr-deref for vlan->real_dev in vlan_dev_hard_header() because team device is not a vlan device.
Cache eth_header_ops in team_setup(), then assign cached header_ops to header_ops of team net device when its type is changed from non-ether to ether to fix the bug.
Fixes: 1d76efe1577b ("team: add support for non-ethernet devices") Suggested-by: Hangbin Liu liuhangbin@gmail.com Reviewed-by: Hangbin Liu liuhangbin@gmail.com Signed-off-by: Ziyang Xuan william.xuanziyang@huawei.com Reviewed-by: Jiri Pirko jiri@nvidia.com Reviewed-by: Eric Dumazet edumazet@google.com Link: https://lore.kernel.org/r/20230918123011.1884401-1-william.xuanziyang@huawei... Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/team/team.c | 10 +++++++++- include/linux/if_team.h | 2 ++ 2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 921ca59822b0f..556b2d1cd2aca 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -2127,7 +2127,12 @@ static const struct ethtool_ops team_ethtool_ops = { static void team_setup_by_port(struct net_device *dev, struct net_device *port_dev) { - dev->header_ops = port_dev->header_ops; + struct team *team = netdev_priv(dev); + + if (port_dev->type == ARPHRD_ETHER) + dev->header_ops = team->header_ops_cache; + else + dev->header_ops = port_dev->header_ops; dev->type = port_dev->type; dev->hard_header_len = port_dev->hard_header_len; dev->needed_headroom = port_dev->needed_headroom; @@ -2174,8 +2179,11 @@ static int team_dev_type_check_change(struct net_device *dev,
static void team_setup(struct net_device *dev) { + struct team *team = netdev_priv(dev); + ether_setup(dev); dev->max_mtu = ETH_MAX_MTU; + team->header_ops_cache = dev->header_ops;
dev->netdev_ops = &team_netdev_ops; dev->ethtool_ops = &team_ethtool_ops; diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 8de6b6e678295..34bcba5a70677 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -189,6 +189,8 @@ struct team { struct net_device *dev; /* associated netdevice */ struct team_pcpu_stats __percpu *pcpu_stats;
+ const struct header_ops *header_ops_cache; + struct mutex lock; /* used for overall locking, e.g. port lists write */
/*
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Artem Chernyshev artem.chernyshev@red-soft.ru
[ Upstream commit f1d95df0f31048f1c59092648997686e3f7d9478 ]
In rds_rdma_cm_event_handler_cmn() check, if conn pointer exists before dereferencing it as rdma_set_service_type() argument
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: fd261ce6a30e ("rds: rdma: update rdma transport for tos") Signed-off-by: Artem Chernyshev artem.chernyshev@red-soft.ru Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/rds/rdma_transport.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/net/rds/rdma_transport.c b/net/rds/rdma_transport.c index d36f3f6b43510..b15cf316b23a2 100644 --- a/net/rds/rdma_transport.c +++ b/net/rds/rdma_transport.c @@ -86,11 +86,13 @@ static int rds_rdma_cm_event_handler_cmn(struct rdma_cm_id *cm_id, break;
case RDMA_CM_EVENT_ADDR_RESOLVED: - rdma_set_service_type(cm_id, conn->c_tos); - rdma_set_min_rnr_timer(cm_id, IB_RNR_TIMER_000_32); - /* XXX do we need to clean up if this fails? */ - ret = rdma_resolve_route(cm_id, - RDS_RDMA_RESOLVE_TIMEOUT_MS); + if (conn) { + rdma_set_service_type(cm_id, conn->c_tos); + rdma_set_min_rnr_timer(cm_id, IB_RNR_TIMER_000_32); + /* XXX do we need to clean up if this fails? */ + ret = rdma_resolve_route(cm_id, + RDS_RDMA_RESOLVE_TIMEOUT_MS); + } break;
case RDMA_CM_EVENT_ROUTE_RESOLVED:
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal fw@strlen.de
[ Upstream commit c9bd26513b3a11b3adb3c2ed8a31a01a87173ff1 ]
nft -f -<<EOF add table ip t add table ip t { flags dormant; } add chain ip t c { type filter hook input priority 0; } add table ip t EOF
Triggers a splat from nf core on next table delete because we lose track of right hook register state:
WARNING: CPU: 2 PID: 1597 at net/netfilter/core.c:501 __nf_unregister_net_hook RIP: 0010:__nf_unregister_net_hook+0x41b/0x570 nf_unregister_net_hook+0xb4/0xf0 __nf_tables_unregister_hook+0x160/0x1d0 [..]
The above should have table in *active* state, but in fact no hooks were registered.
Reject on/off/on games rather than attempting to fix this.
Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates") Reported-by: "Lee, Cherie-Anne" cherie.lee@starlabs.sg Cc: Bing-Jhong Billy Jheng billy@starlabs.sg Cc: info@starlabs.sg Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 521f8c3cb6987..1d6a37430ff6b 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -1211,6 +1211,10 @@ static int nf_tables_updtable(struct nft_ctx *ctx) flags & NFT_TABLE_F_OWNER)) return -EOPNOTSUPP;
+ /* No dormant off/on/off/on games in single transaction */ + if (ctx->table->flags & __NFT_TABLE_F_UPDATE) + return -EINVAL; + trans = nft_trans_alloc(ctx, NFT_MSG_NEWTABLE, sizeof(struct nft_trans_table)); if (trans == NULL)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jozsef Kadlecsik kadlec@netfilter.org
[ Upstream commit 7433b6d2afd512d04398c73aa984d1e285be125b ]
Kyle Zeng reported that there is a race between IPSET_CMD_ADD and IPSET_CMD_SWAP in netfilter/ip_set, which can lead to the invocation of `__ip_set_put` on a wrong `set`, triggering the `BUG_ON(set->ref == 0);` check in it.
The race is caused by using the wrong reference counter, i.e. the ref counter instead of ref_netlink.
Fixes: 24e227896bbf ("netfilter: ipset: Add schedule point in call_ad().") Reported-by: Kyle Zeng zengyhkyle@gmail.com Closes: https://lore.kernel.org/netfilter-devel/ZPZqetxOmH+w%2Fmyc@westworld/#r Tested-by: Kyle Zeng zengyhkyle@gmail.com Signed-off-by: Jozsef Kadlecsik kadlec@netfilter.org Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/ipset/ip_set_core.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c index 9a6b64779e644..20eede37d5228 100644 --- a/net/netfilter/ipset/ip_set_core.c +++ b/net/netfilter/ipset/ip_set_core.c @@ -682,6 +682,14 @@ __ip_set_put(struct ip_set *set) /* set->ref can be swapped out by ip_set_swap, netlink events (like dump) need * a separate reference counter */ +static void +__ip_set_get_netlink(struct ip_set *set) +{ + write_lock_bh(&ip_set_ref_lock); + set->ref_netlink++; + write_unlock_bh(&ip_set_ref_lock); +} + static void __ip_set_put_netlink(struct ip_set *set) { @@ -1695,11 +1703,11 @@ call_ad(struct net *net, struct sock *ctnl, struct sk_buff *skb,
do { if (retried) { - __ip_set_get(set); + __ip_set_get_netlink(set); nfnl_unlock(NFNL_SUBSYS_IPSET); cond_resched(); nfnl_lock(NFNL_SUBSYS_IPSET); - __ip_set_put(set); + __ip_set_put_netlink(set); }
ip_set_lock(set);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Umesh Nerlige Ramappa umesh.nerlige.ramappa@intel.com
[ Upstream commit c524cd40e8a2a1a36f4898eaf2024beefeb815f3 ]
engine->stats is a union of execlist and guc stat objects. When execlist specific fields are initialized, the initial state of guc stats is affected. This results in bad busyness values when using GuC mode. Move the execlist initialization from common code to execlist specific code.
Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa umesh.nerlige.ramappa@intel.com Reviewed-by: Alan Previn alan.previn.teres.alexis@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20230912212247.1828681-1-umesh... (cherry picked from commit 4485bd519f5d6d620a29d0547ff3c982bdeeb468) Signed-off-by: Rodrigo Vivi rodrigo.vivi@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 1 - drivers/gpu/drm/i915/gt/intel_execlists_submission.c | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/gt/intel_engine_cs.c b/drivers/gpu/drm/i915/gt/intel_engine_cs.c index b458547e1fc6e..07967adce16aa 100644 --- a/drivers/gpu/drm/i915/gt/intel_engine_cs.c +++ b/drivers/gpu/drm/i915/gt/intel_engine_cs.c @@ -541,7 +541,6 @@ static int intel_engine_setup(struct intel_gt *gt, enum intel_engine_id id, DRIVER_CAPS(i915)->has_logical_contexts = true;
ewma__engine_latency_init(&engine->latency); - seqcount_init(&engine->stats.execlists.lock);
ATOMIC_INIT_NOTIFIER_HEAD(&engine->context_status_notifier);
diff --git a/drivers/gpu/drm/i915/gt/intel_execlists_submission.c b/drivers/gpu/drm/i915/gt/intel_execlists_submission.c index fc4a846289855..f903ee1ce06e7 100644 --- a/drivers/gpu/drm/i915/gt/intel_execlists_submission.c +++ b/drivers/gpu/drm/i915/gt/intel_execlists_submission.c @@ -3546,6 +3546,8 @@ int intel_execlists_submission_setup(struct intel_engine_cs *engine) logical_ring_default_vfuncs(engine); logical_ring_default_irqs(engine);
+ seqcount_init(&engine->stats.execlists.lock); + if (engine->flags & I915_ENGINE_HAS_RCS_REG_STATE) rcs_submission_override(engine);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Andrzej Siewior bigeasy@linutronix.de
[ Upstream commit 41b43b6c6e30a832c790b010a06772e793bca193 ]
It was brought up by Tetsuo that the following sequence:
write_seqlock_irqsave() printk_deferred_enter()
could lead to a deadlock if the lockdep annotation within write_seqlock_irqsave() triggers.
The problem is that the sequence counter is incremented before the lockdep annotation is performed. The lockdep splat would then attempt to invoke printk() but the reader side, of the same seqcount, could have a tty_port::lock acquired waiting for the sequence number to become even again.
The other lockdep annotations come before the actual locking because "we want to see the locking error before it happens". There is no reason why seqcount should be different here.
Do the lockdep annotation first then perform the locking operation (the sequence increment).
Fixes: 1ca7d67cf5d5a ("seqcount: Add lockdep functionality to seqcount/seqlock structures") Reported-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Signed-off-by: Ingo Molnar mingo@kernel.org Link: https://lore.kernel.org/r/20230920104627._DTHgPyA@linutronix.de
Closes: https://lore.kernel.org/20230621130641.-5iueY1I@linutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/seqlock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h index 3926e90279477..d778af83c8f36 100644 --- a/include/linux/seqlock.h +++ b/include/linux/seqlock.h @@ -512,8 +512,8 @@ do { \
static inline void do_write_seqcount_begin_nested(seqcount_t *s, int subclass) { - do_raw_write_seqcount_begin(s); seqcount_acquire(&s->dep_map, subclass, 0, _RET_IP_); + do_raw_write_seqcount_begin(s); }
/**
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Andrzej Siewior bigeasy@linutronix.de
[ Upstream commit 6f411fb5ca9419090bee6a0a46425e0a5060b734 ]
xdp_do_flush() should be invoked before leaving the NAPI poll function after a XDP-redirect. This is not the case if the driver leaves via the error path (after having a redirect in one of its previous iterations).
Invoke xdp_do_flush() also in the error path.
Cc: Arthur Kiyanovski akiyano@amazon.com Cc: David Arinzon darinzon@amazon.com Cc: Noam Dagan ndagan@amazon.com Cc: Saeed Bishara saeedb@amazon.com Cc: Shay Agroskin shayagr@amazon.com Fixes: a318c70ad152b ("net: ena: introduce XDP redirect implementation") Acked-by: Arthur Kiyanovski akiyano@amazon.com Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Acked-by: Jesper Dangaard Brouer hawk@kernel.org Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 5ce01ac72637e..42a66b74c1e5b 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -1778,6 +1778,9 @@ static int ena_clean_rx_irq(struct ena_ring *rx_ring, struct napi_struct *napi, return work_done;
error: + if (xdp_flags & ENA_XDP_REDIRECT) + xdp_do_flush(); + adapter = netdev_priv(rx_ring->netdev);
if (rc == -ENOSPC) {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Andrzej Siewior bigeasy@linutronix.de
[ Upstream commit edc0140cc3b7b91874ebe70eb7d2a851e8817ccc ]
bnxt_poll_nitroa0() invokes bnxt_rx_pkt() which can run a XDP program which in turn can return XDP_REDIRECT. bnxt_rx_pkt() is also used by __bnxt_poll_work() which flushes (xdp_do_flush()) the packets after each round. bnxt_poll_nitroa0() lacks this feature. xdp_do_flush() should be invoked before leaving the NAPI callback.
Invoke xdp_do_flush() after a redirect in bnxt_poll_nitroa0() NAPI.
Cc: Michael Chan michael.chan@broadcom.com Fixes: f18c2b77b2e4e ("bnxt_en: optimized XDP_REDIRECT support") Reviewed-by: Andy Gospodarek gospo@broadcom.com Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Reviewed-by: Michael Chan michael.chan@broadcom.com Acked-by: Jesper Dangaard Brouer hawk@kernel.org Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 969db3c45d176..e81cb825dff4c 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -2654,6 +2654,7 @@ static int bnxt_poll_nitroa0(struct napi_struct *napi, int budget) struct rx_cmp_ext *rxcmp1; u32 cp_cons, tmp_raw_cons; u32 raw_cons = cpr->cp_raw_cons; + bool flush_xdp = false; u32 rx_pkts = 0; u8 event = 0;
@@ -2688,6 +2689,8 @@ static int bnxt_poll_nitroa0(struct napi_struct *napi, int budget) rx_pkts++; else if (rc == -EBUSY) /* partial completion */ break; + if (event & BNXT_REDIRECT_EVENT) + flush_xdp = true; } else if (unlikely(TX_CMP_TYPE(txcmp) == CMPL_BASE_TYPE_HWRM_DONE)) { bnxt_hwrm_handler(bp, txcmp); @@ -2707,6 +2710,8 @@ static int bnxt_poll_nitroa0(struct napi_struct *napi, int budget)
if (event & BNXT_AGG_EVENT) bnxt_db_write(bp, &rxr->rx_agg_db, rxr->rx_agg_prod); + if (flush_xdp) + xdp_do_flush();
if (!bnxt_has_work(bp, cpr) && rx_pkts < budget) { napi_complete_done(napi, rx_pkts);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Andrzej Siewior bigeasy@linutronix.de
[ Upstream commit 70b2b6892645e58ed6f051dad7f8d1083f0ad553 ]
xdp_do_flush() should be invoked before leaving the NAPI poll function if XDP-redirect has been performed.
Invoke xdp_do_flush() before leaving NAPI.
Cc: Geetha sowjanya gakula@marvell.com Cc: Subbaraya Sundeep sbhatta@marvell.com Cc: Sunil Goutham sgoutham@marvell.com Cc: hariprasad hkelam@marvell.com Fixes: 06059a1a9a4a5 ("octeontx2-pf: Add XDP support to netdev PF") Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Acked-by: Geethasowjanya Akula gakula@marvell.com Acked-by: Jesper Dangaard Brouer hawk@kernel.org Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../marvell/octeontx2/nic/otx2_txrx.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c index 7af223b0a37f5..5704fb75fa477 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c @@ -29,7 +29,8 @@ static bool otx2_xdp_rcv_pkt_handler(struct otx2_nic *pfvf, struct bpf_prog *prog, struct nix_cqe_rx_s *cqe, - struct otx2_cq_queue *cq); + struct otx2_cq_queue *cq, + bool *need_xdp_flush);
static int otx2_nix_cq_op_status(struct otx2_nic *pfvf, struct otx2_cq_queue *cq) @@ -340,7 +341,7 @@ static bool otx2_check_rcv_errors(struct otx2_nic *pfvf, static void otx2_rcv_pkt_handler(struct otx2_nic *pfvf, struct napi_struct *napi, struct otx2_cq_queue *cq, - struct nix_cqe_rx_s *cqe) + struct nix_cqe_rx_s *cqe, bool *need_xdp_flush) { struct nix_rx_parse_s *parse = &cqe->parse; struct nix_rx_sg_s *sg = &cqe->sg; @@ -356,7 +357,7 @@ static void otx2_rcv_pkt_handler(struct otx2_nic *pfvf, }
if (pfvf->xdp_prog) - if (otx2_xdp_rcv_pkt_handler(pfvf, pfvf->xdp_prog, cqe, cq)) + if (otx2_xdp_rcv_pkt_handler(pfvf, pfvf->xdp_prog, cqe, cq, need_xdp_flush)) return;
skb = napi_get_frags(napi); @@ -389,6 +390,7 @@ static int otx2_rx_napi_handler(struct otx2_nic *pfvf, struct napi_struct *napi, struct otx2_cq_queue *cq, int budget) { + bool need_xdp_flush = false; struct nix_cqe_rx_s *cqe; int processed_cqe = 0;
@@ -410,13 +412,15 @@ static int otx2_rx_napi_handler(struct otx2_nic *pfvf, cq->cq_head++; cq->cq_head &= (cq->cqe_cnt - 1);
- otx2_rcv_pkt_handler(pfvf, napi, cq, cqe); + otx2_rcv_pkt_handler(pfvf, napi, cq, cqe, &need_xdp_flush);
cqe->hdr.cqe_type = NIX_XQE_TYPE_INVALID; cqe->sg.seg_addr = 0x00; processed_cqe++; cq->pend_cqe--; } + if (need_xdp_flush) + xdp_do_flush();
/* Free CQEs to HW */ otx2_write64(pfvf, NIX_LF_CQ_OP_DOOR, @@ -1323,7 +1327,8 @@ bool otx2_xdp_sq_append_pkt(struct otx2_nic *pfvf, u64 iova, int len, u16 qidx) static bool otx2_xdp_rcv_pkt_handler(struct otx2_nic *pfvf, struct bpf_prog *prog, struct nix_cqe_rx_s *cqe, - struct otx2_cq_queue *cq) + struct otx2_cq_queue *cq, + bool *need_xdp_flush) { unsigned char *hard_start, *data; int qidx = cq->cq_idx; @@ -1360,8 +1365,10 @@ static bool otx2_xdp_rcv_pkt_handler(struct otx2_nic *pfvf,
otx2_dma_unmap_page(pfvf, iova, pfvf->rbsize, DMA_FROM_DEVICE); - if (!err) + if (!err) { + *need_xdp_flush = true; return true; + } put_page(page); break; default:
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Muhammad Husaini Zulkifli muhammad.husaini.zulkifli@intel.com
[ Upstream commit 1703b2e0de653b459ca6230be32ce7f2ea0ae7ee ]
When users attempt to obtain the coalesce setting using the ethtool command, current code always returns 0 for tx-usecs. This is because I225/6 always uses a queue pair setting, hence tx_coalesce_usecs does not return a value during the igc_ethtool_get_coalesce() callback process. The pair queue condition checking in igc_ethtool_get_coalesce() is removed by this patch so that the user gets information of the value of tx-usecs.
Even if i225/6 is using queue pair setting, there is no harm in notifying the user of the tx-usecs. The implementation of the current code may have previously been a copy of the legacy code i210. Since I225 has the queue pair setting enabled, tx-usecs will always adhere to the user-set rx-usecs value. An error message will appear when the user attempts to set the tx-usecs value for the input parameters because, by default, they should only set the rx-usecs value.
This patch also adds the helper function to get the previous rx coalesce value similar to tx coalesce.
How to test: User can get the coalesce value using ethtool command.
Example command: Get: ethtool -c <interface>
Previous output:
rx-usecs: 3 rx-frames: n/a rx-usecs-irq: n/a rx-frames-irq: n/a
tx-usecs: 0 tx-frames: n/a tx-usecs-irq: n/a tx-frames-irq: n/a
New output:
rx-usecs: 3 rx-frames: n/a rx-usecs-irq: n/a rx-frames-irq: n/a
tx-usecs: 3 tx-frames: n/a tx-usecs-irq: n/a tx-frames-irq: n/a
Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Muhammad Husaini Zulkifli muhammad.husaini.zulkifli@intel.com Tested-by: Naama Meir naamax.meir@linux.intel.com Reviewed-by: Simon Horman horms@kernel.org Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Link: https://lore.kernel.org/r/20230919170331.1581031-1-anthony.l.nguyen@intel.co... Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/igc/igc_ethtool.c | 31 ++++++++++++-------- 1 file changed, 19 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c index 511fc3f412087..9166fde40c772 100644 --- a/drivers/net/ethernet/intel/igc/igc_ethtool.c +++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c @@ -867,6 +867,18 @@ static void igc_ethtool_get_stats(struct net_device *netdev, spin_unlock(&adapter->stats64_lock); }
+static int igc_ethtool_get_previous_rx_coalesce(struct igc_adapter *adapter) +{ + return (adapter->rx_itr_setting <= 3) ? + adapter->rx_itr_setting : adapter->rx_itr_setting >> 2; +} + +static int igc_ethtool_get_previous_tx_coalesce(struct igc_adapter *adapter) +{ + return (adapter->tx_itr_setting <= 3) ? + adapter->tx_itr_setting : adapter->tx_itr_setting >> 2; +} + static int igc_ethtool_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec, struct kernel_ethtool_coalesce *kernel_coal, @@ -874,17 +886,8 @@ static int igc_ethtool_get_coalesce(struct net_device *netdev, { struct igc_adapter *adapter = netdev_priv(netdev);
- if (adapter->rx_itr_setting <= 3) - ec->rx_coalesce_usecs = adapter->rx_itr_setting; - else - ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2; - - if (!(adapter->flags & IGC_FLAG_QUEUE_PAIRS)) { - if (adapter->tx_itr_setting <= 3) - ec->tx_coalesce_usecs = adapter->tx_itr_setting; - else - ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2; - } + ec->rx_coalesce_usecs = igc_ethtool_get_previous_rx_coalesce(adapter); + ec->tx_coalesce_usecs = igc_ethtool_get_previous_tx_coalesce(adapter);
return 0; } @@ -909,8 +912,12 @@ static int igc_ethtool_set_coalesce(struct net_device *netdev, ec->tx_coalesce_usecs == 2) return -EINVAL;
- if ((adapter->flags & IGC_FLAG_QUEUE_PAIRS) && ec->tx_coalesce_usecs) + if ((adapter->flags & IGC_FLAG_QUEUE_PAIRS) && + ec->tx_coalesce_usecs != igc_ethtool_get_previous_tx_coalesce(adapter)) { + NL_SET_ERR_MSG_MOD(extack, + "Queue Pair mode enabled, both Rx and Tx coalescing controlled by rx-usecs"); return -EINVAL; + }
/* If ITR is disabled, disable DMAC */ if (ec->rx_coalesce_usecs == 0) {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Wolsieffer Ben.Wolsieffer@hefring.com
[ Upstream commit 578d7699e5c2add8c2e9549d9d75dfb56c460cb3 ]
The no-MMU implementation of /proc/<pid>/map doesn't normally release the mmap read lock, because it uses !IS_ERR_OR_NULL(_vml) to determine whether to release the lock. Since _vml is NULL when the end of the mappings is reached, the lock is not released.
Reading /proc/1/maps twice doesn't cause a hang because it only takes the read lock, which can be taken multiple times and therefore doesn't show any problem if the lock isn't released. Instead, you need to perform some operation that attempts to take the write lock after reading /proc/<pid>/maps. To actually reproduce the bug, compile the following code as 'proc_maps_bug':
#include <stdio.h> #include <unistd.h> #include <sys/mman.h>
int main(int argc, char *argv[]) { void *buf; sleep(1); buf = mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); puts("mmap returned"); return 0; }
Then, run:
./proc_maps_bug &; cat /proc/$!/maps; fg
Without this patch, mmap() will hang and the command will never complete.
This code was incorrectly adapted from the MMU implementation, which at the time released the lock in m_next() before returning the last entry.
The MMU implementation has diverged further from the no-MMU version since then, so this patch brings their locking and error handling into sync, fixing the bug and hopefully avoiding similar issues in the future.
Link: https://lkml.kernel.org/r/20230914163019.4050530-2-ben.wolsieffer@hefring.co... Fixes: 47fecca15c09 ("fs/proc/task_nommu.c: don't use priv->task->mm") Signed-off-by: Ben Wolsieffer ben.wolsieffer@hefring.com Acked-by: Oleg Nesterov oleg@redhat.com Cc: Giulio Benetti giulio.benetti@benettiengineering.com Cc: Greg Ungerer gerg@uclinux.org Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Stable-dep-of: fe4419801617 ("proc: nommu: fix empty /proc/<pid>/maps") Signed-off-by: Sasha Levin sashal@kernel.org --- fs/proc/task_nommu.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c index 2fd06f52b6a44..bfcf17f75ed50 100644 --- a/fs/proc/task_nommu.c +++ b/fs/proc/task_nommu.c @@ -205,11 +205,16 @@ static void *m_start(struct seq_file *m, loff_t *pos) return ERR_PTR(-ESRCH);
mm = priv->mm; - if (!mm || !mmget_not_zero(mm)) + if (!mm || !mmget_not_zero(mm)) { + put_task_struct(priv->task); + priv->task = NULL; return NULL; + }
if (mmap_read_lock_killable(mm)) { mmput(mm); + put_task_struct(priv->task); + priv->task = NULL; return ERR_PTR(-EINTR); }
@@ -218,23 +223,21 @@ static void *m_start(struct seq_file *m, loff_t *pos) if (vma) return vma;
- mmap_read_unlock(mm); - mmput(mm); return NULL; }
-static void m_stop(struct seq_file *m, void *_vml) +static void m_stop(struct seq_file *m, void *v) { struct proc_maps_private *priv = m->private; + struct mm_struct *mm = priv->mm;
- if (!IS_ERR_OR_NULL(_vml)) { - mmap_read_unlock(priv->mm); - mmput(priv->mm); - } - if (priv->task) { - put_task_struct(priv->task); - priv->task = NULL; - } + if (!priv->task) + return; + + mmap_read_unlock(mm); + mmput(mm); + put_task_struct(priv->task); + priv->task = NULL; }
static void *m_next(struct seq_file *m, void *_p, loff_t *pos)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Wolsieffer ben.wolsieffer@hefring.com
[ Upstream commit fe4419801617514765974f3e796269bc512ad146 ]
On no-MMU, /proc/<pid>/maps reads as an empty file. This happens because find_vma(mm, 0) always returns NULL (assuming no vma actually contains the zero address, which is normally the case).
To fix this bug and improve the maintainability in the future, this patch makes the no-MMU implementation as similar as possible to the MMU implementation.
The only remaining differences are the lack of hold/release_task_mempolicy and the extra code to shoehorn the gate vma into the iterator.
This has been tested on top of 6.5.3 on an STM32F746.
Link: https://lkml.kernel.org/r/20230915160055.971059-2-ben.wolsieffer@hefring.com Fixes: 0c563f148043 ("proc: remove VMA rbtree use from nommu") Signed-off-by: Ben Wolsieffer ben.wolsieffer@hefring.com Cc: Davidlohr Bueso dave@stgolabs.net Cc: Giulio Benetti giulio.benetti@benettiengineering.com Cc: Liam R. Howlett Liam.Howlett@oracle.com Cc: Matthew Wilcox (Oracle) willy@infradead.org Cc: Oleg Nesterov oleg@redhat.com Cc: Vlastimil Babka vbabka@suse.cz Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/proc/internal.h | 2 -- fs/proc/task_nommu.c | 37 ++++++++++++++++++++++--------------- 2 files changed, 22 insertions(+), 17 deletions(-)
diff --git a/fs/proc/internal.h b/fs/proc/internal.h index b701d0207edf0..6b921826d85b6 100644 --- a/fs/proc/internal.h +++ b/fs/proc/internal.h @@ -289,9 +289,7 @@ struct proc_maps_private { struct inode *inode; struct task_struct *task; struct mm_struct *mm; -#ifdef CONFIG_MMU struct vma_iterator iter; -#endif #ifdef CONFIG_NUMA struct mempolicy *task_mempolicy; #endif diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c index bfcf17f75ed50..dc05780f93e13 100644 --- a/fs/proc/task_nommu.c +++ b/fs/proc/task_nommu.c @@ -188,15 +188,28 @@ static int show_map(struct seq_file *m, void *_p) return nommu_vma_show(m, _p); }
-static void *m_start(struct seq_file *m, loff_t *pos) +static struct vm_area_struct *proc_get_vma(struct proc_maps_private *priv, + loff_t *ppos) +{ + struct vm_area_struct *vma = vma_next(&priv->iter); + + if (vma) { + *ppos = vma->vm_start; + } else { + *ppos = -1UL; + } + + return vma; +} + +static void *m_start(struct seq_file *m, loff_t *ppos) { struct proc_maps_private *priv = m->private; + unsigned long last_addr = *ppos; struct mm_struct *mm; - struct vm_area_struct *vma; - unsigned long addr = *pos;
- /* See m_next(). Zero at the start or after lseek. */ - if (addr == -1UL) + /* See proc_get_vma(). Zero at the start or after lseek. */ + if (last_addr == -1UL) return NULL;
/* pin the task and mm whilst we play with them */ @@ -218,12 +231,9 @@ static void *m_start(struct seq_file *m, loff_t *pos) return ERR_PTR(-EINTR); }
- /* start the next element from addr */ - vma = find_vma(mm, addr); - if (vma) - return vma; + vma_iter_init(&priv->iter, mm, last_addr);
- return NULL; + return proc_get_vma(priv, ppos); }
static void m_stop(struct seq_file *m, void *v) @@ -240,12 +250,9 @@ static void m_stop(struct seq_file *m, void *v) priv->task = NULL; }
-static void *m_next(struct seq_file *m, void *_p, loff_t *pos) +static void *m_next(struct seq_file *m, void *_p, loff_t *ppos) { - struct vm_area_struct *vma = _p; - - *pos = vma->vm_end; - return find_vma(vma->vm_mm, vma->vm_end); + return proc_get_vma(m->private, ppos); }
static const struct seq_operations proc_pid_maps_ops = {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang Xiaoxu zhangxiaoxu5@huawei.com
[ Upstream commit d527f51331cace562393a8038d870b3e9916686f ]
There is a UAF when xfstests on cifs:
BUG: KASAN: use-after-free in smb2_is_network_name_deleted+0x27/0x160 Read of size 4 at addr ffff88810103fc08 by task cifsd/923
CPU: 1 PID: 923 Comm: cifsd Not tainted 6.1.0-rc4+ #45 ... Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 kasan_check_range+0x145/0x1a0 smb2_is_network_name_deleted+0x27/0x160 cifs_demultiplex_thread.cold+0x172/0x5a4 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30 </TASK>
Allocated by task 923: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_slab_alloc+0x54/0x60 kmem_cache_alloc+0x147/0x320 mempool_alloc+0xe1/0x260 cifs_small_buf_get+0x24/0x60 allocate_buffers+0xa1/0x1c0 cifs_demultiplex_thread+0x199/0x10d0 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30
Freed by task 921: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x143/0x1b0 kmem_cache_free+0xe3/0x4d0 cifs_small_buf_release+0x29/0x90 SMB2_negotiate+0x8b7/0x1c60 smb2_negotiate+0x51/0x70 cifs_negotiate_protocol+0xf0/0x160 cifs_get_smb_ses+0x5fa/0x13c0 mount_get_conns+0x7a/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0
The UAF is because:
mount(pid: 921) | cifsd(pid: 923) -------------------------------|------------------------------- | cifs_demultiplex_thread SMB2_negotiate | cifs_send_recv | compound_send_recv | smb_send_rqst | wait_for_response | wait_event_state [1] | | standard_receive3 | cifs_handle_standard | handle_mid | mid->resp_buf = buf; [2] | dequeue_mid [3] KILL the process [4] | resp_iov[i].iov_base = buf | free_rsp_buf [5] | | is_network_name_deleted [6] | callback
1. After send request to server, wait the response until mid->mid_state != SUBMITTED; 2. Receive response from server, and set it to mid; 3. Set the mid state to RECEIVED; 4. Kill the process, the mid state already RECEIVED, get 0; 5. Handle and release the negotiate response; 6. UAF.
It can be easily reproduce with add some delay in [3] - [6].
Only sync call has the problem since async call's callback is executed in cifsd process.
Add an extra state to mark the mid state to READY before wakeup the waitter, then it can get the resp safely.
Fixes: ec637e3ffb6b ("[CIFS] Avoid extra large buffer allocation (and memcpy) in cifs_readpages") Reviewed-by: Paulo Alcantara (SUSE) pc@manguebit.com Signed-off-by: Zhang Xiaoxu zhangxiaoxu5@huawei.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/cifsglob.h | 1 + fs/smb/client/transport.c | 34 +++++++++++++++++++++++----------- 2 files changed, 24 insertions(+), 11 deletions(-)
diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h index 03f34ec63e10d..39602f39aea8f 100644 --- a/fs/smb/client/cifsglob.h +++ b/fs/smb/client/cifsglob.h @@ -1776,6 +1776,7 @@ static inline bool is_retryable_error(int error) #define MID_RETRY_NEEDED 8 /* session closed while this request out */ #define MID_RESPONSE_MALFORMED 0x10 #define MID_SHUTDOWN 0x20 +#define MID_RESPONSE_READY 0x40 /* ready for other process handle the rsp */
/* Flags */ #define MID_WAIT_CANCELLED 1 /* Cancelled while waiting for response */ diff --git a/fs/smb/client/transport.c b/fs/smb/client/transport.c index e03ffcf7e201c..87aea456ee903 100644 --- a/fs/smb/client/transport.c +++ b/fs/smb/client/transport.c @@ -35,6 +35,8 @@ void cifs_wake_up_task(struct mid_q_entry *mid) { + if (mid->mid_state == MID_RESPONSE_RECEIVED) + mid->mid_state = MID_RESPONSE_READY; wake_up_process(mid->callback_data); }
@@ -87,7 +89,8 @@ static void __release_mid(struct kref *refcount) struct TCP_Server_Info *server = midEntry->server;
if (midEntry->resp_buf && (midEntry->mid_flags & MID_WAIT_CANCELLED) && - midEntry->mid_state == MID_RESPONSE_RECEIVED && + (midEntry->mid_state == MID_RESPONSE_RECEIVED || + midEntry->mid_state == MID_RESPONSE_READY) && server->ops->handle_cancelled_mid) server->ops->handle_cancelled_mid(midEntry, server);
@@ -759,7 +762,8 @@ wait_for_response(struct TCP_Server_Info *server, struct mid_q_entry *midQ) int error;
error = wait_event_state(server->response_q, - midQ->mid_state != MID_REQUEST_SUBMITTED, + midQ->mid_state != MID_REQUEST_SUBMITTED && + midQ->mid_state != MID_RESPONSE_RECEIVED, (TASK_KILLABLE|TASK_FREEZABLE_UNSAFE)); if (error < 0) return -ERESTARTSYS; @@ -912,7 +916,7 @@ cifs_sync_mid_result(struct mid_q_entry *mid, struct TCP_Server_Info *server)
spin_lock(&server->mid_lock); switch (mid->mid_state) { - case MID_RESPONSE_RECEIVED: + case MID_RESPONSE_READY: spin_unlock(&server->mid_lock); return rc; case MID_RETRY_NEEDED: @@ -1011,6 +1015,9 @@ cifs_compound_callback(struct mid_q_entry *mid) credits.instance = server->reconnect_instance;
add_credits(server, &credits, mid->optype); + + if (mid->mid_state == MID_RESPONSE_RECEIVED) + mid->mid_state = MID_RESPONSE_READY; }
static void @@ -1206,7 +1213,8 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses, send_cancel(server, &rqst[i], midQ[i]); spin_lock(&server->mid_lock); midQ[i]->mid_flags |= MID_WAIT_CANCELLED; - if (midQ[i]->mid_state == MID_REQUEST_SUBMITTED) { + if (midQ[i]->mid_state == MID_REQUEST_SUBMITTED || + midQ[i]->mid_state == MID_RESPONSE_RECEIVED) { midQ[i]->callback = cifs_cancelled_callback; cancelled_mid[i] = true; credits[i].value = 0; @@ -1227,7 +1235,7 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses, }
if (!midQ[i]->resp_buf || - midQ[i]->mid_state != MID_RESPONSE_RECEIVED) { + midQ[i]->mid_state != MID_RESPONSE_READY) { rc = -EIO; cifs_dbg(FYI, "Bad MID state?\n"); goto out; @@ -1414,7 +1422,8 @@ SendReceive(const unsigned int xid, struct cifs_ses *ses, if (rc != 0) { send_cancel(server, &rqst, midQ); spin_lock(&server->mid_lock); - if (midQ->mid_state == MID_REQUEST_SUBMITTED) { + if (midQ->mid_state == MID_REQUEST_SUBMITTED || + midQ->mid_state == MID_RESPONSE_RECEIVED) { /* no longer considered to be "in-flight" */ midQ->callback = release_mid; spin_unlock(&server->mid_lock); @@ -1431,7 +1440,7 @@ SendReceive(const unsigned int xid, struct cifs_ses *ses, }
if (!midQ->resp_buf || !out_buf || - midQ->mid_state != MID_RESPONSE_RECEIVED) { + midQ->mid_state != MID_RESPONSE_READY) { rc = -EIO; cifs_server_dbg(VFS, "Bad MID state?\n"); goto out; @@ -1555,14 +1564,16 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifs_tcon *tcon,
/* Wait for a reply - allow signals to interrupt. */ rc = wait_event_interruptible(server->response_q, - (!(midQ->mid_state == MID_REQUEST_SUBMITTED)) || + (!(midQ->mid_state == MID_REQUEST_SUBMITTED || + midQ->mid_state == MID_RESPONSE_RECEIVED)) || ((server->tcpStatus != CifsGood) && (server->tcpStatus != CifsNew)));
/* Were we interrupted by a signal ? */ spin_lock(&server->srv_lock); if ((rc == -ERESTARTSYS) && - (midQ->mid_state == MID_REQUEST_SUBMITTED) && + (midQ->mid_state == MID_REQUEST_SUBMITTED || + midQ->mid_state == MID_RESPONSE_RECEIVED) && ((server->tcpStatus == CifsGood) || (server->tcpStatus == CifsNew))) { spin_unlock(&server->srv_lock); @@ -1593,7 +1604,8 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifs_tcon *tcon, if (rc) { send_cancel(server, &rqst, midQ); spin_lock(&server->mid_lock); - if (midQ->mid_state == MID_REQUEST_SUBMITTED) { + if (midQ->mid_state == MID_REQUEST_SUBMITTED || + midQ->mid_state == MID_RESPONSE_RECEIVED) { /* no longer considered to be "in-flight" */ midQ->callback = release_mid; spin_unlock(&server->mid_lock); @@ -1613,7 +1625,7 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifs_tcon *tcon, return rc;
/* rcvd frame is ok */ - if (out_buf == NULL || midQ->mid_state != MID_RESPONSE_RECEIVED) { + if (out_buf == NULL || midQ->mid_state != MID_RESPONSE_READY) { rc = -EIO; cifs_tcon_dbg(VFS, "Bad MID state?\n"); goto out;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit b547b5e52a0587e6b25ea520bf2f9e03d00cbcb6 ]
If an error occurs after a successful irq_domain_add_linear() call, it should be undone by a corresponding irq_domain_remove(), as already done in the remove function.
Fixes: c6ce2b6bffe5 ("gpio: add TB10x GPIO driver") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-tb10x.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-tb10x.c b/drivers/gpio/gpio-tb10x.c index de6afa3f97168..05357473d2a11 100644 --- a/drivers/gpio/gpio-tb10x.c +++ b/drivers/gpio/gpio-tb10x.c @@ -195,7 +195,7 @@ static int tb10x_gpio_probe(struct platform_device *pdev) handle_edge_irq, IRQ_NOREQUEST, IRQ_NOPROBE, IRQ_GC_INIT_MASK_CACHE); if (ret) - return ret; + goto err_remove_domain;
gc = tb10x_gpio->domain->gc->gc[0]; gc->reg_base = tb10x_gpio->base; @@ -209,6 +209,10 @@ static int tb10x_gpio_probe(struct platform_device *pdev) }
return 0; + +err_remove_domain: + irq_domain_remove(tb10x_gpio->domain); + return ret; }
static int tb10x_gpio_remove(struct platform_device *pdev)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiaoke Wang xkernel.wang@foxmail.com
[ Upstream commit 7c0195fa9a9e263df204963f88a22b21688ffb66 ]
devm_kstrdup() returns pointer to allocated string on success, NULL on failure. So it is better to check the return value of it.
Fixes: e35478eac030 ("i2c: mux: demux-pinctrl: run properly with multiple instances") Signed-off-by: Xiaoke Wang xkernel.wang@foxmail.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/muxes/i2c-demux-pinctrl.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c index f7a7405d4350a..8e8688e8de0fb 100644 --- a/drivers/i2c/muxes/i2c-demux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c @@ -243,6 +243,10 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
props[i].name = devm_kstrdup(&pdev->dev, "status", GFP_KERNEL); props[i].value = devm_kstrdup(&pdev->dev, "ok", GFP_KERNEL); + if (!props[i].name || !props[i].value) { + err = -ENOMEM; + goto err_rollback; + } props[i].length = 3;
of_changeset_init(&priv->chan[i].chgset);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liang He windhl@126.com
[ Upstream commit db6aee6083a56ac4a6cd1b08fff7938072bcd0a3 ]
In i2c_mux_gpio_probe_fw(), we should add fwnode_handle_put() when break out of the iteration device_for_each_child_node() as it will automatically increase and decrease the refcounter.
Fixes: 98b2b712bc85 ("i2c: i2c-mux-gpio: Enable this driver in ACPI land") Signed-off-by: Liang He windhl@126.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/muxes/i2c-mux-gpio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c index 73a23e117ebec..0930a51c8c7c0 100644 --- a/drivers/i2c/muxes/i2c-mux-gpio.c +++ b/drivers/i2c/muxes/i2c-mux-gpio.c @@ -105,8 +105,10 @@ static int i2c_mux_gpio_probe_fw(struct gpiomux *mux,
} else if (is_acpi_node(child)) { rc = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), values + i); - if (rc) + if (rc) { + fwnode_handle_put(child); return dev_err_probe(dev, rc, "Cannot get address\n"); + } }
i++;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Scally dan.scally@ideasonboard.com
[ Upstream commit 59851fb05d759f13662be143eff0aae605815b0e ]
The error paths for xiic_reinit() return negative values on failure and 0 on success - this error message therefore is triggered on _success_ rather than failure. Correct the condition so it's only shown on failure as intended.
Fixes: 8fa9c9388053 ("i2c: xiic: return value of xiic_reinit") Signed-off-by: Daniel Scally dan.scally@ideasonboard.com Acked-by: Michal Simek michal.simek@amd.com Reviewed-by: Andi Shyti andi.shyti@kernel.org Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-xiic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index b41a6709e47f2..b27bfc7765993 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -420,7 +420,7 @@ static irqreturn_t xiic_process(int irq, void *dev_id) * reset the IP instead of just flush fifos */ ret = xiic_reinit(i2c); - if (!ret) + if (ret < 0) dev_dbg(i2c->adap.dev.parent, "reinit failed\n");
if (i2c->rx_msg) {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aleksey Nasibulin alealexpro100@ya.ru
[ Upstream commit 91994e59079dcb455783d3f9ea338eea6f671af3 ]
Linksys ea6500-v2 have 256MB of ram. Currently we only use 128MB. Expand the definition to use all the available RAM.
Fixes: 03e96644d7a8 ("ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2") Signed-off-by: Aleksey Nasibulin alealexpro100@ya.ru Signed-off-by: Christian Marangi ansuelsmth@gmail.com Cc: stable@vger.kernel.org Acked-by: Rafał Miłecki rafal@milecki.pl Link: https://lore.kernel.org/r/20230712014017.28123-1-ansuelsmth@gmail.com Signed-off-by: Florian Fainelli florian.fainelli@broadcom.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts index f1412ba83defb..0454423fe166c 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts @@ -19,7 +19,8 @@
memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; };
gpio-keys {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Cercueil paul@crapouillou.net
[ Upstream commit b3f3fc32e5ff1e848555af8616318cc667457f90 ]
The previous values were completely bogus, and resulted in the computed DPI ratio being much lower than reality, causing applications and UIs to misbehave.
The new values were measured by myself with a ruler.
Signed-off-by: Paul Cercueil paul@crapouillou.net Acked-by: Sam Ravnborg sam@ravnborg.org Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2") Cc: stable@vger.kernel.org # v5.8+ Link: https://lore.kernel.org/r/20230714153720.336990-1-paul@crapouillou.net Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/exynos4210-i9100.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index bba85011ecc93..53e023fc1cacf 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -201,8 +201,8 @@ power-on-delay = <10>; reset-delay = <10>;
- panel-width-mm = <90>; - panel-height-mm = <154>; + panel-width-mm = <56>; + panel-height-mm = <93>;
display-timings { timing {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
[ Upstream commit 43db69268149049540b1d2bbe8a69e59d5cb43b6 ]
There is no syna,f11-flip-x property, so assume intention was to use touchscreen-inverted-x.
Fixes: ab80661883de ("ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Link: https://lore.kernel.org/r/20230720115335.137354-4-krzysztof.kozlowski@linaro... Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts index 3f45f5c5d37b5..4abc85c181690 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -131,8 +131,8 @@
rmi-f11@11 { reg = <0x11>; - syna,f11-flip-x = <1>; syna,sensor-type = <1>; + touchscreen-inverted-x; }; }; };
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
[ Upstream commit 31fba16c19c45b2b3a7c23b0bfef80aed1b29050 ]
The node names for functions of Synaptics RMI4 touchscreen must be as "rmi4-fXX", as required by bindings and Linux driver.
qcom-msm8974pro-sony-xperia-shinano-castor.dtb: synaptics@2c: Unevaluated properties are not allowed ('rmi-f01@1', 'rmi-f11@11' were unexpected)
Fixes: ab80661883de ("ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Link: https://lore.kernel.org/r/20230720115335.137354-5-krzysztof.kozlowski@linaro... Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts index 4abc85c181690..a572ac630c1b3 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -124,12 +124,12 @@
syna,startup-delay-ms = <10>;
- rmi-f01@1 { + rmi4-f01@1 { reg = <0x1>; syna,nosleep = <1>; };
- rmi-f11@11 { + rmi4-f11@11 { reg = <0x11>; syna,sensor-type = <1>; touchscreen-inverted-x;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
[ Upstream commit 7c74379afdfee7b13f1cd8ff1ad6e0f986aec96c ]
There is no syna,nosleep property in Synaptics RMI4 touchscreen:
qcom-msm8974pro-sony-xperia-shinano-castor.dtb: synaptics@2c: rmi4-f01@1: 'syna,nosleep' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: ab80661883de ("ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Link: https://lore.kernel.org/r/20230720115335.137354-6-krzysztof.kozlowski@linaro... Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts index a572ac630c1b3..cc49bb777df8a 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -126,7 +126,7 @@
rmi4-f01@1 { reg = <0x1>; - syna,nosleep = <1>; + syna,nosleep-mode = <1>; };
rmi4-f11@11 {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chao Yu chao@kernel.org
[ Upstream commit 59237a21776f70ffb0420611c23e7158e1317037 ]
Wei Chen reports a kernel bug as blew:
INFO: task syz-executor.0:29056 blocked for more than 143 seconds. Not tainted 5.15.0-rc5 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor.0 state:D stack:14632 pid:29056 ppid: 6574 flags:0x00000004 Call Trace: __schedule+0x4a1/0x1720 schedule+0x36/0xe0 rwsem_down_write_slowpath+0x322/0x7a0 fscrypt_ioctl_set_policy+0x11f/0x2a0 __f2fs_ioctl+0x1a9f/0x5780 f2fs_ioctl+0x89/0x3a0 __x64_sys_ioctl+0xe8/0x140 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae
Eric did some investigation on this issue, quoted from reply of Eric:
"Well, the quality of this bug report has a lot to be desired (not on upstream kernel, reproducer is full of totally irrelevant stuff, not sent to the mailing list of the filesystem whose disk image is being fuzzed, etc.). But what is going on is that f2fs_empty_dir() doesn't consider the case of a directory with an extremely large i_size on a malicious disk image.
Specifically, the reproducer mounts an f2fs image with a directory that has an i_size of 14814520042850357248, then calls FS_IOC_SET_ENCRYPTION_POLICY on it.
That results in a call to f2fs_empty_dir() to check whether the directory is empty. f2fs_empty_dir() then iterates through all 3616826182336513 blocks the directory allegedly contains to check whether any contain anything. i_rwsem is held during this, so anything else that tries to take it will hang."
In order to solve this issue, let's use f2fs_get_next_page_offset() to speed up iteration by skipping holes for all below functions: - f2fs_empty_dir - f2fs_readdir - find_in_level
The way why we can speed up iteration was described in 'commit 3cf4574705b4 ("f2fs: introduce get_next_page_offset to speed up SEEK_DATA")'.
Meanwhile, in f2fs_empty_dir(), let's use f2fs_find_data_page() instead f2fs_get_lock_data_page(), due to i_rwsem was held in caller of f2fs_empty_dir(), there shouldn't be any races, so it's fine to not lock dentry page during lookuping dirents in the page.
Link: https://lore.kernel.org/lkml/536944df-a0ae-1dd8-148f-510b476e1347@kernel.org... Reported-by: Wei Chen harperchen1110@gmail.com Cc: Eric Biggers ebiggers@google.com Signed-off-by: Chao Yu chao@kernel.org Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Stable-dep-of: d2d9bb3b6d2f ("f2fs: get out of a repeat loop when getting a locked data page") Signed-off-by: Sasha Levin sashal@kernel.org --- fs/f2fs/data.c | 17 ++++++++++++----- fs/f2fs/dir.c | 34 ++++++++++++++++++++++++---------- fs/f2fs/f2fs.h | 5 +++-- fs/f2fs/gc.c | 4 ++-- 4 files changed, 41 insertions(+), 19 deletions(-)
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index c230824ab5e6e..0faed0575f8aa 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -1212,7 +1212,8 @@ int f2fs_get_block(struct dnode_of_data *dn, pgoff_t index) }
struct page *f2fs_get_read_data_page(struct inode *inode, pgoff_t index, - blk_opf_t op_flags, bool for_write) + blk_opf_t op_flags, bool for_write, + pgoff_t *next_pgofs) { struct address_space *mapping = inode->i_mapping; struct dnode_of_data dn; @@ -1238,12 +1239,17 @@ struct page *f2fs_get_read_data_page(struct inode *inode, pgoff_t index,
set_new_dnode(&dn, inode, NULL, NULL, 0); err = f2fs_get_dnode_of_data(&dn, index, LOOKUP_NODE); - if (err) + if (err) { + if (err == -ENOENT && next_pgofs) + *next_pgofs = f2fs_get_next_page_offset(&dn, index); goto put_err; + } f2fs_put_dnode(&dn);
if (unlikely(dn.data_blkaddr == NULL_ADDR)) { err = -ENOENT; + if (next_pgofs) + *next_pgofs = index + 1; goto put_err; } if (dn.data_blkaddr != NEW_ADDR && @@ -1287,7 +1293,8 @@ struct page *f2fs_get_read_data_page(struct inode *inode, pgoff_t index, return ERR_PTR(err); }
-struct page *f2fs_find_data_page(struct inode *inode, pgoff_t index) +struct page *f2fs_find_data_page(struct inode *inode, pgoff_t index, + pgoff_t *next_pgofs) { struct address_space *mapping = inode->i_mapping; struct page *page; @@ -1297,7 +1304,7 @@ struct page *f2fs_find_data_page(struct inode *inode, pgoff_t index) return page; f2fs_put_page(page, 0);
- page = f2fs_get_read_data_page(inode, index, 0, false); + page = f2fs_get_read_data_page(inode, index, 0, false, next_pgofs); if (IS_ERR(page)) return page;
@@ -1323,7 +1330,7 @@ struct page *f2fs_get_lock_data_page(struct inode *inode, pgoff_t index, struct address_space *mapping = inode->i_mapping; struct page *page; repeat: - page = f2fs_get_read_data_page(inode, index, 0, for_write); + page = f2fs_get_read_data_page(inode, index, 0, for_write, NULL); if (IS_ERR(page)) return page;
diff --git a/fs/f2fs/dir.c b/fs/f2fs/dir.c index bf5ba75b75d24..8373eba3a1337 100644 --- a/fs/f2fs/dir.c +++ b/fs/f2fs/dir.c @@ -340,6 +340,7 @@ static struct f2fs_dir_entry *find_in_level(struct inode *dir, unsigned int bidx, end_block; struct page *dentry_page; struct f2fs_dir_entry *de = NULL; + pgoff_t next_pgofs; bool room = false; int max_slots;
@@ -350,12 +351,13 @@ static struct f2fs_dir_entry *find_in_level(struct inode *dir, le32_to_cpu(fname->hash) % nbucket); end_block = bidx + nblock;
- for (; bidx < end_block; bidx++) { + while (bidx < end_block) { /* no need to allocate new dentry pages to all the indices */ - dentry_page = f2fs_find_data_page(dir, bidx); + dentry_page = f2fs_find_data_page(dir, bidx, &next_pgofs); if (IS_ERR(dentry_page)) { if (PTR_ERR(dentry_page) == -ENOENT) { room = true; + bidx = next_pgofs; continue; } else { *res_page = dentry_page; @@ -376,6 +378,8 @@ static struct f2fs_dir_entry *find_in_level(struct inode *dir, if (max_slots >= s) room = true; f2fs_put_page(dentry_page, 0); + + bidx++; }
if (!de && room && F2FS_I(dir)->chash != fname->hash) { @@ -963,7 +967,7 @@ void f2fs_delete_entry(struct f2fs_dir_entry *dentry, struct page *page,
bool f2fs_empty_dir(struct inode *dir) { - unsigned long bidx; + unsigned long bidx = 0; struct page *dentry_page; unsigned int bit_pos; struct f2fs_dentry_block *dentry_blk; @@ -972,13 +976,17 @@ bool f2fs_empty_dir(struct inode *dir) if (f2fs_has_inline_dentry(dir)) return f2fs_empty_inline_dir(dir);
- for (bidx = 0; bidx < nblock; bidx++) { - dentry_page = f2fs_get_lock_data_page(dir, bidx, false); + while (bidx < nblock) { + pgoff_t next_pgofs; + + dentry_page = f2fs_find_data_page(dir, bidx, &next_pgofs); if (IS_ERR(dentry_page)) { - if (PTR_ERR(dentry_page) == -ENOENT) + if (PTR_ERR(dentry_page) == -ENOENT) { + bidx = next_pgofs; continue; - else + } else { return false; + } }
dentry_blk = page_address(dentry_page); @@ -990,10 +998,12 @@ bool f2fs_empty_dir(struct inode *dir) NR_DENTRY_IN_BLOCK, bit_pos);
- f2fs_put_page(dentry_page, 1); + f2fs_put_page(dentry_page, 0);
if (bit_pos < NR_DENTRY_IN_BLOCK) return false; + + bidx++; } return true; } @@ -1111,7 +1121,8 @@ static int f2fs_readdir(struct file *file, struct dir_context *ctx) goto out_free; }
- for (; n < npages; n++, ctx->pos = n * NR_DENTRY_IN_BLOCK) { + for (; n < npages; ctx->pos = n * NR_DENTRY_IN_BLOCK) { + pgoff_t next_pgofs;
/* allow readdir() to be interrupted */ if (fatal_signal_pending(current)) { @@ -1125,11 +1136,12 @@ static int f2fs_readdir(struct file *file, struct dir_context *ctx) page_cache_sync_readahead(inode->i_mapping, ra, file, n, min(npages - n, (pgoff_t)MAX_DIR_RA_PAGES));
- dentry_page = f2fs_find_data_page(inode, n); + dentry_page = f2fs_find_data_page(inode, n, &next_pgofs); if (IS_ERR(dentry_page)) { err = PTR_ERR(dentry_page); if (err == -ENOENT) { err = 0; + n = next_pgofs; continue; } else { goto out_free; @@ -1148,6 +1160,8 @@ static int f2fs_readdir(struct file *file, struct dir_context *ctx) }
f2fs_put_page(dentry_page, 0); + + n++; } out_free: fscrypt_fname_free_buffer(&fstr); diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 37dca728ff967..f56abb39601ac 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -3784,8 +3784,9 @@ int f2fs_reserve_new_block(struct dnode_of_data *dn); int f2fs_get_block(struct dnode_of_data *dn, pgoff_t index); int f2fs_reserve_block(struct dnode_of_data *dn, pgoff_t index); struct page *f2fs_get_read_data_page(struct inode *inode, pgoff_t index, - blk_opf_t op_flags, bool for_write); -struct page *f2fs_find_data_page(struct inode *inode, pgoff_t index); + blk_opf_t op_flags, bool for_write, pgoff_t *next_pgofs); +struct page *f2fs_find_data_page(struct inode *inode, pgoff_t index, + pgoff_t *next_pgofs); struct page *f2fs_get_lock_data_page(struct inode *inode, pgoff_t index, bool for_write); struct page *f2fs_get_new_data_page(struct inode *inode, diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c index aa4d513daa8f8..ec7212f7a9b73 100644 --- a/fs/f2fs/gc.c +++ b/fs/f2fs/gc.c @@ -1600,8 +1600,8 @@ static int gc_data_segment(struct f2fs_sb_info *sbi, struct f2fs_summary *sum, continue; }
- data_page = f2fs_get_read_data_page(inode, - start_bidx, REQ_RAHEAD, true); + data_page = f2fs_get_read_data_page(inode, start_bidx, + REQ_RAHEAD, true, NULL); f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]); if (IS_ERR(data_page)) { iput(inode);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jaegeuk Kim jaegeuk@kernel.org
[ Upstream commit d2d9bb3b6d2fbccb5b33d3a85a2830971625a4ea ]
https://bugzilla.kernel.org/show_bug.cgi?id=216050
Somehow we're getting a page which has a different mapping. Let's avoid the infinite loop.
Cc: stable@vger.kernel.org Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/f2fs/data.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index 0faed0575f8aa..a982f91b71eb2 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -1329,18 +1329,14 @@ struct page *f2fs_get_lock_data_page(struct inode *inode, pgoff_t index, { struct address_space *mapping = inode->i_mapping; struct page *page; -repeat: + page = f2fs_get_read_data_page(inode, index, 0, for_write, NULL); if (IS_ERR(page)) return page;
/* wait for read completion */ lock_page(page); - if (unlikely(page->mapping != mapping)) { - f2fs_put_page(page, 1); - goto repeat; - } - if (unlikely(!PageUptodate(page))) { + if (unlikely(page->mapping != mapping || !PageUptodate(page))) { f2fs_put_page(page, 1); return ERR_PTR(-EIO); }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Holger Dengler dengler@linux.ibm.com
[ Upstream commit da2863f15945de100b95c72d5656541d30956c5d ]
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced PKEY_TYPE_EP11_AES for the PKEY_CLR2SECK2 IOCTL to convert an AES clearkey into a securekey of this type. Unfortunately, all PKEY_CLR2SECK2 IOCTL requests with type PKEY_TYPE_EP11_AES return with an error (-EINVAL). Fix the handling for PKEY_TYPE_EP11_AES in PKEY_CLR2SECK2 IOCTL, so that userspace can convert clearkey blobs into PKEY_TYPE_EP11_AES securekey blobs.
Cc: stable@vger.kernel.org # v5.10+ Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler dengler@linux.ibm.com Reviewed-by: Ingo Franzki ifranzki@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/crypto/pkey_api.c | 16 +++++-- drivers/s390/crypto/zcrypt_ep11misc.c | 61 ++++++++++++++++++++------- drivers/s390/crypto/zcrypt_ep11misc.h | 3 +- 3 files changed, 60 insertions(+), 20 deletions(-)
diff --git a/drivers/s390/crypto/pkey_api.c b/drivers/s390/crypto/pkey_api.c index 2b92ec20ed68e..df0f19e6d9235 100644 --- a/drivers/s390/crypto/pkey_api.c +++ b/drivers/s390/crypto/pkey_api.c @@ -212,7 +212,8 @@ static int pkey_clr2ep11key(const u8 *clrkey, size_t clrkeylen, card = apqns[i] >> 16; dom = apqns[i] & 0xFFFF; rc = ep11_clr2keyblob(card, dom, clrkeylen * 8, - 0, clrkey, keybuf, keybuflen); + 0, clrkey, keybuf, keybuflen, + PKEY_TYPE_EP11); if (rc == 0) break; } @@ -627,6 +628,11 @@ static int pkey_clr2seckey2(const struct pkey_apqn *apqns, size_t nr_apqns, if (*keybufsize < MINEP11AESKEYBLOBSIZE) return -EINVAL; break; + case PKEY_TYPE_EP11_AES: + if (*keybufsize < (sizeof(struct ep11kblob_header) + + MINEP11AESKEYBLOBSIZE)) + return -EINVAL; + break; default: return -EINVAL; } @@ -645,9 +651,11 @@ static int pkey_clr2seckey2(const struct pkey_apqn *apqns, size_t nr_apqns, for (i = 0, rc = -ENODEV; i < nr_apqns; i++) { card = apqns[i].card; dom = apqns[i].domain; - if (ktype == PKEY_TYPE_EP11) { + if (ktype == PKEY_TYPE_EP11 || + ktype == PKEY_TYPE_EP11_AES) { rc = ep11_clr2keyblob(card, dom, ksize, kflags, - clrkey, keybuf, keybufsize); + clrkey, keybuf, keybufsize, + ktype); } else if (ktype == PKEY_TYPE_CCA_DATA) { rc = cca_clr2seckey(card, dom, ksize, clrkey, keybuf); @@ -1361,7 +1369,7 @@ static long pkey_unlocked_ioctl(struct file *filp, unsigned int cmd, apqns = _copy_apqns_from_user(kcs.apqns, kcs.apqn_entries); if (IS_ERR(apqns)) return PTR_ERR(apqns); - kkey = kmalloc(klen, GFP_KERNEL); + kkey = kzalloc(klen, GFP_KERNEL); if (!kkey) { kfree(apqns); return -ENOMEM; diff --git a/drivers/s390/crypto/zcrypt_ep11misc.c b/drivers/s390/crypto/zcrypt_ep11misc.c index 20bbeec1a1a22..77e1ffaafaea1 100644 --- a/drivers/s390/crypto/zcrypt_ep11misc.c +++ b/drivers/s390/crypto/zcrypt_ep11misc.c @@ -1000,12 +1000,12 @@ static int ep11_cryptsingle(u16 card, u16 domain, return rc; }
-static int ep11_unwrapkey(u16 card, u16 domain, - const u8 *kek, size_t keksize, - const u8 *enckey, size_t enckeysize, - u32 mech, const u8 *iv, - u32 keybitsize, u32 keygenflags, - u8 *keybuf, size_t *keybufsize) +static int _ep11_unwrapkey(u16 card, u16 domain, + const u8 *kek, size_t keksize, + const u8 *enckey, size_t enckeysize, + u32 mech, const u8 *iv, + u32 keybitsize, u32 keygenflags, + u8 *keybuf, size_t *keybufsize) { struct uw_req_pl { struct pl_head head; @@ -1042,7 +1042,6 @@ static int ep11_unwrapkey(u16 card, u16 domain, struct ep11_cprb *req = NULL, *rep = NULL; struct ep11_target_dev target; struct ep11_urb *urb = NULL; - struct ep11keyblob *kb; size_t req_pl_size; int api, rc = -ENOMEM; u8 *p; @@ -1124,14 +1123,9 @@ static int ep11_unwrapkey(u16 card, u16 domain, goto out; }
- /* copy key blob and set header values */ + /* copy key blob */ memcpy(keybuf, rep_pl->data, rep_pl->data_len); *keybufsize = rep_pl->data_len; - kb = (struct ep11keyblob *)keybuf; - kb->head.type = TOKTYPE_NON_CCA; - kb->head.len = rep_pl->data_len; - kb->head.version = TOKVER_EP11_AES; - kb->head.bitlen = keybitsize;
out: kfree(req); @@ -1140,6 +1134,42 @@ static int ep11_unwrapkey(u16 card, u16 domain, return rc; }
+static int ep11_unwrapkey(u16 card, u16 domain, + const u8 *kek, size_t keksize, + const u8 *enckey, size_t enckeysize, + u32 mech, const u8 *iv, + u32 keybitsize, u32 keygenflags, + u8 *keybuf, size_t *keybufsize, + u8 keybufver) +{ + struct ep11kblob_header *hdr; + size_t hdr_size, pl_size; + u8 *pl; + int rc; + + rc = ep11_kb_split(keybuf, *keybufsize, keybufver, + &hdr, &hdr_size, &pl, &pl_size); + if (rc) + return rc; + + rc = _ep11_unwrapkey(card, domain, kek, keksize, enckey, enckeysize, + mech, iv, keybitsize, keygenflags, + pl, &pl_size); + if (rc) + return rc; + + *keybufsize = hdr_size + pl_size; + + /* update header information */ + hdr = (struct ep11kblob_header *)keybuf; + hdr->type = TOKTYPE_NON_CCA; + hdr->len = *keybufsize; + hdr->version = keybufver; + hdr->bitlen = keybitsize; + + return 0; +} + static int ep11_wrapkey(u16 card, u16 domain, const u8 *key, size_t keysize, u32 mech, const u8 *iv, @@ -1274,7 +1304,8 @@ static int ep11_wrapkey(u16 card, u16 domain, }
int ep11_clr2keyblob(u16 card, u16 domain, u32 keybitsize, u32 keygenflags, - const u8 *clrkey, u8 *keybuf, size_t *keybufsize) + const u8 *clrkey, u8 *keybuf, size_t *keybufsize, + u32 keytype) { int rc; u8 encbuf[64], *kek = NULL; @@ -1321,7 +1352,7 @@ int ep11_clr2keyblob(u16 card, u16 domain, u32 keybitsize, u32 keygenflags, /* Step 3: import the encrypted key value as a new key */ rc = ep11_unwrapkey(card, domain, kek, keklen, encbuf, encbuflen, 0, def_iv, - keybitsize, 0, keybuf, keybufsize); + keybitsize, 0, keybuf, keybufsize, keytype); if (rc) { DEBUG_ERR( "%s importing key value as new key failed,, rc=%d\n", diff --git a/drivers/s390/crypto/zcrypt_ep11misc.h b/drivers/s390/crypto/zcrypt_ep11misc.h index ed328c354bade..b7f9cbe3d58de 100644 --- a/drivers/s390/crypto/zcrypt_ep11misc.h +++ b/drivers/s390/crypto/zcrypt_ep11misc.h @@ -113,7 +113,8 @@ int ep11_genaeskey(u16 card, u16 domain, u32 keybitsize, u32 keygenflags, * Generate EP11 AES secure key with given clear key value. */ int ep11_clr2keyblob(u16 cardnr, u16 domain, u32 keybitsize, u32 keygenflags, - const u8 *clrkey, u8 *keybuf, size_t *keybufsize); + const u8 *clrkey, u8 *keybuf, size_t *keybufsize, + u32 keytype);
/* * Build a list of ep11 apqns meeting the following constrains:
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amit Pundir amit.pundir@linaro.org
[ Upstream commit 110e70fccce4f22b53986ae797d665ffb1950aa6 ]
Adding a reserved memory region for the framebuffer memory (the splash memory region set up by the bootloader).
It fixes a kernel panic (arm-smmu: Unhandled context fault at this particular memory region) reported on DB845c running v5.10.y.
Cc: stable@vger.kernel.org # v5.10+ Reviewed-by: Caleb Connolly caleb.connolly@linaro.org Signed-off-by: Amit Pundir amit.pundir@linaro.org Acked-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Link: https://lore.kernel.org/r/20230726132719.2117369-2-amit.pundir@linaro.org Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index c289bf0903b45..c9efcb894a52f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -100,6 +100,14 @@ }; };
+ reserved-memory { + /* Cont splash region set up by the bootloader */ + cont_splash_mem: framebuffer@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + }; + lt9611_1v8: lt9611-vdd18-regulator { compatible = "regulator-fixed"; regulator-name = "LT9611_1V8"; @@ -512,6 +520,7 @@ };
&mdss { + memory-region = <&cont_splash_mem>; status = "okay"; };
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pradeep Kumar Chitrapu quic_pradeepc@quicinc.com
[ Upstream commit 6257c702264c44d74c6b71f0c62a7665da2dc356 ]
ieee80211_tx_status() treats packets in 802.11 frame format and tries to extract sta address from packet header. When tx encap offload is enabled, this becomes invalid operation. Hence, switch to using ieee80211_tx_status_ext() after filling in station address for handling both 802.11 and 802.3 frames.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Pradeep Kumar Chitrapu quic_pradeepc@quicinc.com Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20230403195738.25367-2-quic_pradeepc@quicinc.com Stable-dep-of: 29d15589f084 ("wifi: ath11k: Cleanup mac80211 references on failure during tx_complete") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath11k/dp.h | 4 +++ drivers/net/wireless/ath/ath11k/dp_tx.c | 33 ++++++++++++++++++++++++- drivers/net/wireless/ath/ath11k/dp_tx.h | 1 + 3 files changed, 37 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/dp.h b/drivers/net/wireless/ath/ath11k/dp.h index be9eafc872b3b..232fd2e638bf6 100644 --- a/drivers/net/wireless/ath/ath11k/dp.h +++ b/drivers/net/wireless/ath/ath11k/dp.h @@ -303,12 +303,16 @@ struct ath11k_dp {
#define HTT_TX_WBM_COMP_STATUS_OFFSET 8
+#define HTT_INVALID_PEER_ID 0xffff + /* HTT tx completion is overlaid in wbm_release_ring */ #define HTT_TX_WBM_COMP_INFO0_STATUS GENMASK(12, 9) #define HTT_TX_WBM_COMP_INFO0_REINJECT_REASON GENMASK(16, 13) #define HTT_TX_WBM_COMP_INFO0_REINJECT_REASON GENMASK(16, 13)
#define HTT_TX_WBM_COMP_INFO1_ACK_RSSI GENMASK(31, 24) +#define HTT_TX_WBM_COMP_INFO2_SW_PEER_ID GENMASK(15, 0) +#define HTT_TX_WBM_COMP_INFO2_VALID BIT(21)
struct htt_tx_wbm_completion { u32 info0; diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c index 8afbba2369354..08a28464eb7a9 100644 --- a/drivers/net/wireless/ath/ath11k/dp_tx.c +++ b/drivers/net/wireless/ath/ath11k/dp_tx.c @@ -316,10 +316,12 @@ ath11k_dp_tx_htt_tx_complete_buf(struct ath11k_base *ab, struct dp_tx_ring *tx_ring, struct ath11k_dp_htt_wbm_tx_status *ts) { + struct ieee80211_tx_status status = { 0 }; struct sk_buff *msdu; struct ieee80211_tx_info *info; struct ath11k_skb_cb *skb_cb; struct ath11k *ar; + struct ath11k_peer *peer;
spin_lock(&tx_ring->tx_idr_lock); msdu = idr_remove(&tx_ring->txbuf_idr, ts->msdu_id); @@ -341,6 +343,11 @@ ath11k_dp_tx_htt_tx_complete_buf(struct ath11k_base *ab,
dma_unmap_single(ab->dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
+ if (!skb_cb->vif) { + dev_kfree_skb_any(msdu); + return; + } + memset(&info->status, 0, sizeof(info->status));
if (ts->acked) { @@ -355,7 +362,23 @@ ath11k_dp_tx_htt_tx_complete_buf(struct ath11k_base *ab, } }
- ieee80211_tx_status(ar->hw, msdu); + spin_lock_bh(&ab->base_lock); + peer = ath11k_peer_find_by_id(ab, ts->peer_id); + if (!peer || !peer->sta) { + ath11k_dbg(ab, ATH11K_DBG_DATA, + "dp_tx: failed to find the peer with peer_id %d\n", + ts->peer_id); + spin_unlock_bh(&ab->base_lock); + dev_kfree_skb_any(msdu); + return; + } + spin_unlock_bh(&ab->base_lock); + + status.sta = peer->sta; + status.info = info; + status.skb = msdu; + + ieee80211_tx_status_ext(ar->hw, &status); }
static void @@ -379,7 +402,15 @@ ath11k_dp_tx_process_htt_tx_complete(struct ath11k_base *ab, ts.msdu_id = msdu_id; ts.ack_rssi = FIELD_GET(HTT_TX_WBM_COMP_INFO1_ACK_RSSI, status_desc->info1); + + if (FIELD_GET(HTT_TX_WBM_COMP_INFO2_VALID, status_desc->info2)) + ts.peer_id = FIELD_GET(HTT_TX_WBM_COMP_INFO2_SW_PEER_ID, + status_desc->info2); + else + ts.peer_id = HTT_INVALID_PEER_ID; + ath11k_dp_tx_htt_tx_complete_buf(ab, tx_ring, &ts); + break; case HAL_WBM_REL_HTT_TX_COMP_STATUS_REINJ: case HAL_WBM_REL_HTT_TX_COMP_STATUS_INSPECT: diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.h b/drivers/net/wireless/ath/ath11k/dp_tx.h index e87d65bfbf06e..68a21ea9b9346 100644 --- a/drivers/net/wireless/ath/ath11k/dp_tx.h +++ b/drivers/net/wireless/ath/ath11k/dp_tx.h @@ -13,6 +13,7 @@ struct ath11k_dp_htt_wbm_tx_status { u32 msdu_id; bool acked; int ack_rssi; + u16 peer_id; };
void ath11k_dp_tx_update_txcompl(struct ath11k *ar, struct hal_tx_status *ts);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sven Eckelmann sven@narfation.org
[ Upstream commit 29d15589f084d71a4ea8c544039c5839db0236e2 ]
When a function is using functions from mac80211 to free an skb then it should do it consistently and not switch to the generic dev_kfree_skb_any (or similar functions). Otherwise (like in the error handlers), mac80211 will will not be aware of the freed skb and thus not clean up related information in its internal data structures.
Not doing so lead in the past to filled up structure which then prevented new clients to connect.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Fixes: 6257c702264c ("wifi: ath11k: fix tx status reporting in encap offload mode") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-2-c0af729d6229@... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath11k/dp_tx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c index 08a28464eb7a9..64c8ccac22d27 100644 --- a/drivers/net/wireless/ath/ath11k/dp_tx.c +++ b/drivers/net/wireless/ath/ath11k/dp_tx.c @@ -344,7 +344,7 @@ ath11k_dp_tx_htt_tx_complete_buf(struct ath11k_base *ab, dma_unmap_single(ab->dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
if (!skb_cb->vif) { - dev_kfree_skb_any(msdu); + ieee80211_free_txskb(ar->hw, msdu); return; }
@@ -566,12 +566,12 @@ static void ath11k_dp_tx_complete_msdu(struct ath11k *ar, dma_unmap_single(ab->dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
if (unlikely(!rcu_access_pointer(ab->pdevs_active[ar->pdev_idx]))) { - dev_kfree_skb_any(msdu); + ieee80211_free_txskb(ar->hw, msdu); return; }
if (unlikely(!skb_cb->vif)) { - dev_kfree_skb_any(msdu); + ieee80211_free_txskb(ar->hw, msdu); return; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shreyas Deodhar sdeodhar@marvell.com
[ Upstream commit 1d201c81d4cc6840735bbcc99e6031503e5cf3b8 ]
In current I/O path, Tx and Rx may not be processed on same CPU. This may lead to thrashing and optimum performance may not be achieved.
Pick qpair such that Tx and Rx are processed on same CPU.
Signed-off-by: Shreyas Deodhar sdeodhar@marvell.com Signed-off-by: Nilesh Javali njavali@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Stable-dep-of: 59f10a05b5c7 ("scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_def.h | 2 ++ drivers/scsi/qla2xxx/qla_init.c | 2 -- drivers/scsi/qla2xxx/qla_inline.h | 55 +++++++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_isr.c | 3 +- drivers/scsi/qla2xxx/qla_nvme.c | 4 +++ drivers/scsi/qla2xxx/qla_os.c | 6 ++++ 6 files changed, 69 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 7d282906598f3..817efdd32ad63 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -3475,6 +3475,7 @@ struct qla_msix_entry { int have_irq; int in_use; uint32_t vector; + uint32_t vector_base0; uint16_t entry; char name[30]; void *handle; @@ -4133,6 +4134,7 @@ struct qla_hw_data { struct req_que **req_q_map; struct rsp_que **rsp_q_map; struct qla_qpair **queue_pair_map; + struct qla_qpair **qp_cpu_map; unsigned long req_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)]; unsigned long rsp_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)]; unsigned long qpair_qid_map[(QLA_MAX_QUEUES / 8) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 36abdb0de1694..79de31e7e8b2a 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -9758,8 +9758,6 @@ struct qla_qpair *qla2xxx_create_qpair(struct scsi_qla_host *vha, int qos, qpair->req = ha->req_q_map[req_id]; qpair->rsp->req = qpair->req; qpair->rsp->qpair = qpair; - /* init qpair to this cpu. Will adjust at run time. */ - qla_cpu_update(qpair, raw_smp_processor_id());
if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) { if (ha->fw_attributes & BIT_4) diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index a7b5d11146827..d5cf9db2a8ea3 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -573,3 +573,58 @@ fcport_is_bigger(fc_port_t *fcport) { return !fcport_is_smaller(fcport); } + +static inline struct qla_qpair * +qla_mapq_nvme_select_qpair(struct qla_hw_data *ha, struct qla_qpair *qpair) +{ + int cpuid = smp_processor_id(); + + if (qpair->cpuid != cpuid && + ha->qp_cpu_map[cpuid]) { + qpair = ha->qp_cpu_map[cpuid]; + } + return qpair; +} + +static inline void +qla_mapq_init_qp_cpu_map(struct qla_hw_data *ha, + struct qla_msix_entry *msix, + struct qla_qpair *qpair) +{ + const struct cpumask *mask; + unsigned int cpu; + + if (!ha->qp_cpu_map) + return; + mask = pci_irq_get_affinity(ha->pdev, msix->vector_base0); + qpair->cpuid = cpumask_first(mask); + for_each_cpu(cpu, mask) { + ha->qp_cpu_map[cpu] = qpair; + } + msix->cpuid = qpair->cpuid; +} + +static inline void +qla_mapq_free_qp_cpu_map(struct qla_hw_data *ha) +{ + if (ha->qp_cpu_map) { + kfree(ha->qp_cpu_map); + ha->qp_cpu_map = NULL; + } +} + +static inline int qla_mapq_alloc_qp_cpu_map(struct qla_hw_data *ha) +{ + scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); + + if (!ha->qp_cpu_map) { + ha->qp_cpu_map = kcalloc(NR_CPUS, sizeof(struct qla_qpair *), + GFP_KERNEL); + if (!ha->qp_cpu_map) { + ql_log(ql_log_fatal, vha, 0x0180, + "Unable to allocate memory for qp_cpu_map ptrs.\n"); + return -1; + } + } + return 0; +} diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 0111249cc8774..a5e6246127ed3 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -3819,7 +3819,6 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha,
if (rsp->qpair->cpuid != smp_processor_id() || !rsp->qpair->rcv_intr) { rsp->qpair->rcv_intr = 1; - qla_cpu_update(rsp->qpair, smp_processor_id()); }
#define __update_rsp_in(_is_shadow_hba, _rsp, _rsp_in) \ @@ -4425,6 +4424,7 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) for (i = 0; i < ha->msix_count; i++) { qentry = &ha->msix_entries[i]; qentry->vector = pci_irq_vector(ha->pdev, i); + qentry->vector_base0 = i; qentry->entry = i; qentry->have_irq = 0; qentry->in_use = 0; @@ -4652,5 +4652,6 @@ int qla25xx_request_irq(struct qla_hw_data *ha, struct qla_qpair *qpair, } msix->have_irq = 1; msix->handle = qpair; + qla_mapq_init_qp_cpu_map(ha, msix, qpair); return ret; } diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c index c9a6fc882a801..9941b38eac93c 100644 --- a/drivers/scsi/qla2xxx/qla_nvme.c +++ b/drivers/scsi/qla2xxx/qla_nvme.c @@ -609,6 +609,7 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport, fc_port_t *fcport; struct srb_iocb *nvme; struct scsi_qla_host *vha; + struct qla_hw_data *ha; int rval; srb_t *sp; struct qla_qpair *qpair = hw_queue_handle; @@ -629,6 +630,7 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport, return -ENODEV;
vha = fcport->vha; + ha = vha->hw;
if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) return -EBUSY; @@ -643,6 +645,8 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport, if (fcport->nvme_flag & NVME_FLAG_RESETTING) return -EBUSY;
+ qpair = qla_mapq_nvme_select_qpair(ha, qpair); + /* Alloc SRB structure */ sp = qla2xxx_get_qpair_sp(vha, qpair, fcport, GFP_ATOMIC); if (!sp) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 78f7cd16967fa..b33ffec1cb75e 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -480,6 +480,11 @@ static int qla2x00_alloc_queues(struct qla_hw_data *ha, struct req_que *req, "Unable to allocate memory for queue pair ptrs.\n"); goto fail_qpair_map; } + if (qla_mapq_alloc_qp_cpu_map(ha) != 0) { + kfree(ha->queue_pair_map); + ha->queue_pair_map = NULL; + goto fail_qpair_map; + } }
/* @@ -554,6 +559,7 @@ static void qla2x00_free_queues(struct qla_hw_data *ha) ha->base_qpair = NULL; }
+ qla_mapq_free_qp_cpu_map(ha); spin_lock_irqsave(&ha->hardware_lock, flags); for (cnt = 0; cnt < ha->max_req_queues; cnt++) { if (!test_bit(cnt, ha->req_qid_map))
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nilesh Javali njavali@marvell.com
[ Upstream commit 59f10a05b5c7b675256a66e3161741239889ff80 ]
The following call trace was observed:
localhost kernel: nvme nvme0: NVME-FC{0}: controller connect complete localhost kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u129:4/75092 localhost kernel: nvme nvme0: NVME-FC{0}: new ctrl: NQN "nqn.1992-08.com.netapp:sn.b42d198afb4d11ecad6d00a098d6abfa:subsystem.PR_Channel2022_RH84_subsystem_291" localhost kernel: caller is qla_nvme_post_cmd+0x216/0x1380 [qla2xxx] localhost kernel: CPU: 6 PID: 75092 Comm: kworker/u129:4 Kdump: loaded Tainted: G B W OE --------- --- 5.14.0-70.22.1.el9_0.x86_64+debug #1 localhost kernel: Hardware name: HPE ProLiant XL420 Gen10/ProLiant XL420 Gen10, BIOS U39 01/13/2022 localhost kernel: Workqueue: nvme-wq nvme_async_event_work [nvme_core] localhost kernel: Call Trace: localhost kernel: dump_stack_lvl+0x57/0x7d localhost kernel: check_preemption_disabled+0xc8/0xd0 localhost kernel: qla_nvme_post_cmd+0x216/0x1380 [qla2xxx]
Use raw_smp_processor_id() instead of smp_processor_id().
Also use queue_work() across the driver instead of queue_work_on() thus avoiding usage of smp_processor_id() when CONFIG_DEBUG_PREEMPT is enabled.
Cc: stable@vger.kernel.org Suggested-by: John Garry john.g.garry@oracle.com Signed-off-by: Nilesh Javali njavali@marvell.com Link: https://lore.kernel.org/r/20230831112146.32595-2-njavali@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_inline.h | 2 +- drivers/scsi/qla2xxx/qla_isr.c | 6 +++--- drivers/scsi/qla2xxx/qla_target.c | 3 +-- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 4 ++-- 4 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index d5cf9db2a8ea3..e66441355f7ae 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -577,7 +577,7 @@ fcport_is_bigger(fc_port_t *fcport) static inline struct qla_qpair * qla_mapq_nvme_select_qpair(struct qla_hw_data *ha, struct qla_qpair *qpair) { - int cpuid = smp_processor_id(); + int cpuid = raw_smp_processor_id();
if (qpair->cpuid != cpuid && ha->qp_cpu_map[cpuid]) { diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index a5e6246127ed3..cf1025c917267 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -3817,7 +3817,7 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha, if (!ha->flags.fw_started) return;
- if (rsp->qpair->cpuid != smp_processor_id() || !rsp->qpair->rcv_intr) { + if (rsp->qpair->cpuid != raw_smp_processor_id() || !rsp->qpair->rcv_intr) { rsp->qpair->rcv_intr = 1; }
@@ -4305,7 +4305,7 @@ qla2xxx_msix_rsp_q(int irq, void *dev_id) } ha = qpair->hw;
- queue_work_on(smp_processor_id(), ha->wq, &qpair->q_work); + queue_work(ha->wq, &qpair->q_work);
return IRQ_HANDLED; } @@ -4331,7 +4331,7 @@ qla2xxx_msix_rsp_q_hs(int irq, void *dev_id) wrt_reg_dword(®->hccr, HCCRX_CLR_RISC_INT); spin_unlock_irqrestore(&ha->hardware_lock, flags);
- queue_work_on(smp_processor_id(), ha->wq, &qpair->q_work); + queue_work(ha->wq, &qpair->q_work);
return IRQ_HANDLED; } diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 545473a0ffc84..5a5beb41786ed 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -4442,8 +4442,7 @@ static int qlt_handle_cmd_for_atio(struct scsi_qla_host *vha, queue_work_on(cmd->se_cmd.cpuid, qla_tgt_wq, &cmd->work); } else if (ha->msix_count) { if (cmd->atio.u.isp24.fcp_cmnd.rddata) - queue_work_on(smp_processor_id(), qla_tgt_wq, - &cmd->work); + queue_work(qla_tgt_wq, &cmd->work); else queue_work_on(cmd->se_cmd.cpuid, qla_tgt_wq, &cmd->work); diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index 8fa0056b56ddb..e54ee6770e79f 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -310,7 +310,7 @@ static void tcm_qla2xxx_free_cmd(struct qla_tgt_cmd *cmd) cmd->trc_flags |= TRC_CMD_DONE;
INIT_WORK(&cmd->work, tcm_qla2xxx_complete_free); - queue_work_on(smp_processor_id(), tcm_qla2xxx_free_wq, &cmd->work); + queue_work(tcm_qla2xxx_free_wq, &cmd->work); }
/* @@ -557,7 +557,7 @@ static void tcm_qla2xxx_handle_data(struct qla_tgt_cmd *cmd) cmd->trc_flags |= TRC_DATA_IN; cmd->cmd_in_wq = 1; INIT_WORK(&cmd->work, tcm_qla2xxx_handle_data_work); - queue_work_on(smp_processor_id(), tcm_qla2xxx_free_wq, &cmd->work); + queue_work(tcm_qla2xxx_free_wq, &cmd->work); }
static int tcm_qla2xxx_chk_dif_tags(uint32_t tag)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Philip Yang Philip.Yang@amd.com
[ Upstream commit 75dda67c7213c3e0d17244a8c42547c27ee746f8 ]
kfd_flush_tlb_after_unmap should return true for GFX v9.4.3, to do TLB heavyweight flush after unmapping from GPU to guarantee that the GPU will not access pages after they have been unmapped. This also helps improve the mapping to GPU performance.
Without this, KFD accidently flush TLB after mapping to GPU because the vm update sequence number is increased by previous unmapping.
Signed-off-by: Philip Yang Philip.Yang@amd.com Reviewed-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Stable-dep-of: edcfe22985d0 ("drm/amdkfd: Insert missing TLB flush on GFX10 and later") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h index 6d6588b9beed7..f374f112f7b71 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h @@ -1349,9 +1349,9 @@ void kfd_flush_tlb(struct kfd_process_device *pdd, enum TLB_FLUSH_TYPE type);
static inline bool kfd_flush_tlb_after_unmap(struct kfd_dev *dev) { - return KFD_GC_VERSION(dev) == IP_VERSION(9, 4, 2) || - (KFD_GC_VERSION(dev) == IP_VERSION(9, 4, 1) && - dev->adev->sdma.instance[0].fw_version >= 18) || + return KFD_GC_VERSION(dev) == IP_VERSION(9, 4, 3) || + KFD_GC_VERSION(dev) == IP_VERSION(9, 4, 2) || + (KFD_GC_VERSION(dev) == IP_VERSION(9, 4, 1) && dev->sdma_fw_version >= 18) || KFD_GC_VERSION(dev) == IP_VERSION(9, 4, 0); }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Harish Kasiviswanathan Harish.Kasiviswanathan@amd.com
[ Upstream commit edcfe22985d09ee8e2346c9217f5a52ab150099f ]
Heavy-weight TLB flush is required after unmap on all GPUs for correctness and security.
Signed-off-by: Harish Kasiviswanathan Harish.Kasiviswanathan@amd.com Reviewed-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h index f374f112f7b71..ec8a576ac5a9e 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h @@ -1349,8 +1349,7 @@ void kfd_flush_tlb(struct kfd_process_device *pdd, enum TLB_FLUSH_TYPE type);
static inline bool kfd_flush_tlb_after_unmap(struct kfd_dev *dev) { - return KFD_GC_VERSION(dev) == IP_VERSION(9, 4, 3) || - KFD_GC_VERSION(dev) == IP_VERSION(9, 4, 2) || + return KFD_GC_VERSION(dev) > IP_VERSION(9, 4, 2) || (KFD_GC_VERSION(dev) == IP_VERSION(9, 4, 1) && dev->sdma_fw_version >= 18) || KFD_GC_VERSION(dev) == IP_VERSION(9, 4, 0); }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Qu Wenruo wqu@suse.com
[ Upstream commit 74ee79142c0a344d4eae2eb7012ebc4e82254109 ]
Commit f98b6215d7d1 ("btrfs: extent_io: do extra check for extent buffer read write functions") changed how we handle invalid extent buffer range for read_extent_buffer().
Previously if the range is invalid we just set the destination to zero, but after the patch we do nothing and error out.
This can lead to smatch static checker errors like:
fs/btrfs/print-tree.c:186 print_uuid_item() error: uninitialized symbol 'subvol_id'. fs/btrfs/tests/extent-io-tests.c:338 check_eb_bitmap() error: uninitialized symbol 'has'. fs/btrfs/tests/extent-io-tests.c:353 check_eb_bitmap() error: uninitialized symbol 'has'. fs/btrfs/uuid-tree.c:203 btrfs_uuid_tree_remove() error: uninitialized symbol 'read_subid'. fs/btrfs/uuid-tree.c:353 btrfs_uuid_tree_iterate() error: uninitialized symbol 'subid_le'. fs/btrfs/uuid-tree.c:72 btrfs_uuid_tree_lookup() error: uninitialized symbol 'data'. fs/btrfs/volumes.c:7415 btrfs_dev_stats_value() error: uninitialized symbol 'val'.
Fix those warnings by reverting back to the old memset() behavior. By this we keep the static checker happy and would still make a lot of noise when such invalid ranges are passed in.
Reported-by: Dan Carpenter dan.carpenter@linaro.org Fixes: f98b6215d7d1 ("btrfs: extent_io: do extra check for extent buffer read write functions") Signed-off-by: Qu Wenruo wqu@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/extent_io.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 0ad69041954ff..afcc96a1f4276 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -5184,8 +5184,14 @@ void read_extent_buffer(const struct extent_buffer *eb, void *dstv, char *dst = (char *)dstv; unsigned long i = get_eb_page_index(start);
- if (check_eb_range(eb, start, len)) + if (check_eb_range(eb, start, len)) { + /* + * Invalid range hit, reset the memory, so callers won't get + * some random garbage for their uninitialzed memory. + */ + memset(dstv, 0, len); return; + }
offset = get_eb_offset_in_page(eb, start);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jinjie Ruan ruanjinjie@huawei.com
[ Upstream commit c777b11d34e0f47dbbc4b018ef65ad030f2b283a ]
Inject fault while probing mdpy.ko, if kstrdup() of create_dir() fails in kobject_add_internal() in kobject_init_and_add() in mdev_type_add() in parent_create_sysfs_files(), it will return 0 and probe successfully. And when rmmod mdpy.ko, the mdpy_dev_exit() will call mdev_unregister_parent(), the mdev_type_remove() may traverse uninitialized parent->types[i] in parent_remove_sysfs_files(), and it will cause below null-ptr-deref.
If mdev_type_add() fails, return the error code and kset_unregister() to fix the issue.
general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 2 PID: 10215 Comm: rmmod Tainted: G W N 6.6.0-rc2+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__kobject_del+0x62/0x1c0 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660 FS: 00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0 DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? __kobject_del+0x62/0x1c0 kobject_del+0x32/0x50 parent_remove_sysfs_files+0xd6/0x170 [mdev] mdev_unregister_parent+0xfb/0x190 [mdev] ? mdev_register_parent+0x270/0x270 [mdev] ? find_module_all+0x9d/0xe0 mdpy_dev_exit+0x17/0x63 [mdpy] __do_sys_delete_module.constprop.0+0x2fa/0x4b0 ? module_flags+0x300/0x300 ? __fput+0x4e7/0xa00 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fbc813221b7 Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe780e0648 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00007ffe780e06a8 RCX: 00007fbc813221b7 RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055e214df9b58 RBP: 000055e214df9af0 R08: 00007ffe780df5c1 R09: 0000000000000000 R10: 00007fbc8139ecc0 R11: 0000000000000206 R12: 00007ffe780e0870 R13: 00007ffe780e0ed0 R14: 000055e214df9260 R15: 000055e214df9af0 </TASK> Modules linked in: mdpy(-) mdev vfio_iommu_type1 vfio [last unloaded: mdpy] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:__kobject_del+0x62/0x1c0 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660 FS: 00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0 DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 1 seconds..
Fixes: da44c340c4fe ("vfio/mdev: simplify mdev_type handling") Signed-off-by: Jinjie Ruan ruanjinjie@huawei.com Reviewed-by: Eric Farman farman@linux.ibm.com Reviewed-by: Jason Gunthorpe jgg@nvidia.com Link: https://lore.kernel.org/r/20230918115551.1423193-1-ruanjinjie@huawei.com Signed-off-by: Alex Williamson alex.williamson@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vfio/mdev/mdev_sysfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/vfio/mdev/mdev_sysfs.c b/drivers/vfio/mdev/mdev_sysfs.c index abe3359dd477f..16b007c6bbb56 100644 --- a/drivers/vfio/mdev/mdev_sysfs.c +++ b/drivers/vfio/mdev/mdev_sysfs.c @@ -233,7 +233,8 @@ int parent_create_sysfs_files(struct mdev_parent *parent) out_err: while (--i >= 0) mdev_type_remove(parent->types[i]); - return 0; + kset_unregister(parent->mdev_types_kset); + return ret; }
static ssize_t remove_store(struct device *dev, struct device_attribute *attr,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Hellwig hch@lst.de
[ Upstream commit ef8f8f04a0b25e8f294b24350e8463a8d6a9ba0b ]
While commit d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage") to be built in, it can still build a kernel without MMC support and thuse no mmc_detect_change symbol at all.
Add ifdefs to build the mmc support code in the alchemy arch code conditional on mmc support.
Fixes: d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage") Reported-by: kernel test robot lkp@intel.com Signed-off-by: Christoph Hellwig hch@lst.de Acked-by: Randy Dunlap rdunlap@infradead.org Tested-by: Randy Dunlap rdunlap@infradead.org # build-tested Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/alchemy/devboards/db1000.c | 4 ++++ arch/mips/alchemy/devboards/db1200.c | 6 ++++++ arch/mips/alchemy/devboards/db1300.c | 4 ++++ 3 files changed, 14 insertions(+)
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c index 50de86eb8784c..3183df60ad337 100644 --- a/arch/mips/alchemy/devboards/db1000.c +++ b/arch/mips/alchemy/devboards/db1000.c @@ -164,6 +164,7 @@ static struct platform_device db1x00_audio_dev = {
/******************************************************************************/
+#ifdef CONFIG_MMC_AU1X static irqreturn_t db1100_mmc_cd(int irq, void *ptr) { mmc_detect_change(ptr, msecs_to_jiffies(500)); @@ -369,6 +370,7 @@ static struct platform_device db1100_mmc1_dev = { .num_resources = ARRAY_SIZE(au1100_mmc1_res), .resource = au1100_mmc1_res, }; +#endif /* CONFIG_MMC_AU1X */
/******************************************************************************/
@@ -432,8 +434,10 @@ static struct platform_device *db1x00_devs[] = {
static struct platform_device *db1100_devs[] = { &au1100_lcd_device, +#ifdef CONFIG_MMC_AU1X &db1100_mmc0_dev, &db1100_mmc1_dev, +#endif };
int __init db1000_dev_setup(void) diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c index 76080c71a2a7b..f521874ebb07b 100644 --- a/arch/mips/alchemy/devboards/db1200.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -326,6 +326,7 @@ static struct platform_device db1200_ide_dev = {
/**********************************************************************/
+#ifdef CONFIG_MMC_AU1X /* SD carddetects: they're supposed to be edge-triggered, but ack * doesn't seem to work (CPLD Rev 2). Instead, the screaming one * is disabled and its counterpart enabled. The 200ms timeout is @@ -584,6 +585,7 @@ static struct platform_device pb1200_mmc1_dev = { .num_resources = ARRAY_SIZE(au1200_mmc1_res), .resource = au1200_mmc1_res, }; +#endif /* CONFIG_MMC_AU1X */
/**********************************************************************/
@@ -751,7 +753,9 @@ static struct platform_device db1200_audiodma_dev = { static struct platform_device *db1200_devs[] __initdata = { NULL, /* PSC0, selected by S6.8 */ &db1200_ide_dev, +#ifdef CONFIG_MMC_AU1X &db1200_mmc0_dev, +#endif &au1200_lcd_dev, &db1200_eth_dev, &db1200_nand_dev, @@ -762,7 +766,9 @@ static struct platform_device *db1200_devs[] __initdata = { };
static struct platform_device *pb1200_devs[] __initdata = { +#ifdef CONFIG_MMC_AU1X &pb1200_mmc1_dev, +#endif };
/* Some peripheral base addresses differ on the PB1200 */ diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c index ff61901329c62..d377e043b49f8 100644 --- a/arch/mips/alchemy/devboards/db1300.c +++ b/arch/mips/alchemy/devboards/db1300.c @@ -450,6 +450,7 @@ static struct platform_device db1300_ide_dev = {
/**********************************************************************/
+#ifdef CONFIG_MMC_AU1X static irqreturn_t db1300_mmc_cd(int irq, void *ptr) { disable_irq_nosync(irq); @@ -632,6 +633,7 @@ static struct platform_device db1300_sd0_dev = { .resource = au1300_sd0_res, .num_resources = ARRAY_SIZE(au1300_sd0_res), }; +#endif /* CONFIG_MMC_AU1X */
/**********************************************************************/
@@ -767,8 +769,10 @@ static struct platform_device *db1300_dev[] __initdata = { &db1300_5waysw_dev, &db1300_nand_dev, &db1300_ide_dev, +#ifdef CONFIG_MMC_AU1X &db1300_sd0_dev, &db1300_sd1_dev, +#endif &db1300_lcd_dev, &db1300_ac97_dev, &db1300_i2s_dev,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Charles Kearney charles.kearney@hpe.com
[ Upstream commit 1a8196a93e493c0a50b800cb09cef60b124eee15 ]
Bug fix to correct return value of gxp_spi_write function to zero. Completion of succesful operation should return zero.
Fixes: 730bc8ba5e9e spi: spi-gxp: Add support for HPE GXP SoCs
Signed-off-by: Charles Kearney charles.kearney@hpe.com Link: https://lore.kernel.org/r/20230920215339.4125856-2-charles.kearney@hpe.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-gxp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-gxp.c b/drivers/spi/spi-gxp.c index c900c2f39b578..21b07e2518513 100644 --- a/drivers/spi/spi-gxp.c +++ b/drivers/spi/spi-gxp.c @@ -195,7 +195,7 @@ static ssize_t gxp_spi_write(struct gxp_spi_chip *chip, const struct spi_mem_op return ret; }
- return write_len; + return 0; }
static int do_gxp_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marek Vasut marex@denx.de
[ Upstream commit ca161b259cc84fe1f4a2ce4c73c3832cf6f713f1 ]
Do not generate the HS front and back porch gaps, the HSA gap and EOT packet, as per "SN65DSI83 datasheet SLLSEC1I - SEPTEMBER 2012 - REVISED OCTOBER 2020", page 22, these packets are not required. This makes the TI SN65DSI83 bridge work with Samsung DSIM on i.MX8MN.
Signed-off-by: Marek Vasut marex@denx.de Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Robert Foss rfoss@kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230403190242.224490-1-marex@... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/bridge/ti-sn65dsi83.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c index 55efd3eb66723..3f43b44145a89 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi83.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c @@ -655,7 +655,9 @@ static int sn65dsi83_host_attach(struct sn65dsi83 *ctx)
dsi->lanes = dsi_lanes; dsi->format = MIPI_DSI_FMT_RGB888; - dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_VIDEO_NO_HFP | MIPI_DSI_MODE_VIDEO_NO_HBP | + MIPI_DSI_MODE_VIDEO_NO_HSA | MIPI_DSI_MODE_NO_EOT_PACKET;
ret = devm_mipi_dsi_attach(dev, dsi); if (ret < 0) {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julien Panis jpanis@baylibre.com
[ Upstream commit d929b2b7464f95ec01e47f560b1e687482ba8929 ]
The am335x-evm started producing boot errors because of subtle timing changes:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xf03c1010 ... sysc_reset from sysc_probe+0xf60/0x1514 sysc_probe from platform_probe+0x5c/0xbc ...
The fix consists in using the appropriate sleep function in sysc reset. For flexible sleeping, fsleep is recommended. Here, sysc delay parameter can take any value in [0 - 255] us range. As a result, fsleep() should be used, calling udelay() for a sysc delay lower than 10 us.
Signed-off-by: Julien Panis jpanis@baylibre.com Fixes: e709ed70d122 ("bus: ti-sysc: Fix missing reset delay handling") Message-ID: 20230821-fix-ti-sysc-reset-v1-1-5a0a5d8fae55@baylibre.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bus/ti-sysc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index ddde1427c90c7..6ac79417b5120 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -2166,8 +2166,7 @@ static int sysc_reset(struct sysc *ddata) }
if (ddata->cfg.srst_udelay) - usleep_range(ddata->cfg.srst_udelay, - ddata->cfg.srst_udelay * 2); + fsleep(ddata->cfg.srst_udelay);
if (ddata->post_reset_quirk) ddata->post_reset_quirk(ddata);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adam Ford aford173@gmail.com
[ Upstream commit 11729caa520950e17cd81bc43ffc477c46cf791e ]
Commit feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling") created a list of SoC types searching for strings based on names and wildcards which associates the SoC to different families.
The OMAP34xx and OMAP35xx are treated as SOC_3430 while OMAP36xx and OMAP37xx are treated as SOC_3630, but the AM35xx isn't listed.
The AM35xx is mostly an OMAP3430, and a later commit a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") looks for the SOC type and behaves in a certain way if it's SOC_3430.
This caused a regression on the AM3517 causing it to return two errors:
ti-sysc: probe of 48318000.target-module failed with error -16 ti-sysc: probe of 49032000.target-module failed with error -16
Fix this by treating the creating SOC_AM35 and inserting it between the SOC_3430 and SOC_3630. If it is treaed the same way as the SOC_3430 when checking the status of sysc_check_active_timer, the error conditions will disappear.
Fixes: a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") Fixes: feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling") Signed-off-by: Adam Ford aford173@gmail.com Message-ID: 20230906233442.270835-1-aford173@gmail.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bus/ti-sysc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 6ac79417b5120..d56e7b61bb5a9 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -38,6 +38,7 @@ enum sysc_soc { SOC_2420, SOC_2430, SOC_3430, + SOC_AM35, SOC_3630, SOC_4430, SOC_4460, @@ -1878,7 +1879,7 @@ static void sysc_pre_reset_quirk_dss(struct sysc *ddata) dev_warn(ddata->dev, "%s: timed out %08x !+ %08x\n", __func__, val, irq_mask);
- if (sysc_soc->soc == SOC_3430) { + if (sysc_soc->soc == SOC_3430 || sysc_soc->soc == SOC_AM35) { /* Clear DSS_SDI_CONTROL */ sysc_write(ddata, 0x44, 0);
@@ -3042,6 +3043,7 @@ static void ti_sysc_idle(struct work_struct *work) static const struct soc_device_attribute sysc_soc_match[] = { SOC_FLAG("OMAP242*", SOC_2420), SOC_FLAG("OMAP243*", SOC_2430), + SOC_FLAG("AM35*", SOC_AM35), SOC_FLAG("OMAP3[45]*", SOC_3430), SOC_FLAG("OMAP3[67]*", SOC_3630), SOC_FLAG("OMAP443*", SOC_4430), @@ -3248,7 +3250,7 @@ static int sysc_check_active_timer(struct sysc *ddata) * can be dropped if we stop supporting old beagleboard revisions * A to B4 at some point. */ - if (sysc_soc->soc == SOC_3430) + if (sysc_soc->soc == SOC_3430 || sysc_soc->soc == SOC_AM35) error = -ENXIO; else error = -EBUSY;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cristian Marussi cristian.marussi@arm.com
[ Upstream commit 3da82112355bba263597fcbb24d275fc57e69e7e ]
Harden internal accesses to domain info in the SCMI perf protocol.
Signed-off-by: Cristian Marussi cristian.marussi@arm.com Link: https://lore.kernel.org/r/20230717161246.1761777-2-cristian.marussi@arm.com Signed-off-by: Sudeep Holla sudeep.holla@arm.com Stable-dep-of: c3638b851bc1 ("firmware: arm_scmi: Fixup perf power-cost/microwatt support") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/arm_scmi/perf.c | 89 +++++++++++++++++++++++--------- 1 file changed, 64 insertions(+), 25 deletions(-)
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c index ecf5c4de851b7..43dd242ecc49c 100644 --- a/drivers/firmware/arm_scmi/perf.c +++ b/drivers/firmware/arm_scmi/perf.c @@ -139,7 +139,7 @@ struct perf_dom_info {
struct scmi_perf_info { u32 version; - int num_domains; + u16 num_domains; enum scmi_power_scale power_scale; u64 stats_addr; u32 stats_size; @@ -356,11 +356,26 @@ static int scmi_perf_mb_limits_set(const struct scmi_protocol_handle *ph, return ret; }
+static inline struct perf_dom_info * +scmi_perf_domain_lookup(const struct scmi_protocol_handle *ph, u32 domain) +{ + struct scmi_perf_info *pi = ph->get_priv(ph); + + if (domain >= pi->num_domains) + return ERR_PTR(-EINVAL); + + return pi->dom_info + domain; +} + static int scmi_perf_limits_set(const struct scmi_protocol_handle *ph, u32 domain, u32 max_perf, u32 min_perf) { struct scmi_perf_info *pi = ph->get_priv(ph); - struct perf_dom_info *dom = pi->dom_info + domain; + struct perf_dom_info *dom; + + dom = scmi_perf_domain_lookup(ph, domain); + if (IS_ERR(dom)) + return PTR_ERR(dom);
if (PROTOCOL_REV_MAJOR(pi->version) >= 0x3 && !max_perf && !min_perf) return -EINVAL; @@ -408,8 +423,11 @@ static int scmi_perf_mb_limits_get(const struct scmi_protocol_handle *ph, static int scmi_perf_limits_get(const struct scmi_protocol_handle *ph, u32 domain, u32 *max_perf, u32 *min_perf) { - struct scmi_perf_info *pi = ph->get_priv(ph); - struct perf_dom_info *dom = pi->dom_info + domain; + struct perf_dom_info *dom; + + dom = scmi_perf_domain_lookup(ph, domain); + if (IS_ERR(dom)) + return PTR_ERR(dom);
if (dom->fc_info && dom->fc_info[PERF_FC_LIMIT].get_addr) { struct scmi_fc_info *fci = &dom->fc_info[PERF_FC_LIMIT]; @@ -449,8 +467,11 @@ static int scmi_perf_mb_level_set(const struct scmi_protocol_handle *ph, static int scmi_perf_level_set(const struct scmi_protocol_handle *ph, u32 domain, u32 level, bool poll) { - struct scmi_perf_info *pi = ph->get_priv(ph); - struct perf_dom_info *dom = pi->dom_info + domain; + struct perf_dom_info *dom; + + dom = scmi_perf_domain_lookup(ph, domain); + if (IS_ERR(dom)) + return PTR_ERR(dom);
if (dom->fc_info && dom->fc_info[PERF_FC_LEVEL].set_addr) { struct scmi_fc_info *fci = &dom->fc_info[PERF_FC_LEVEL]; @@ -490,8 +511,11 @@ static int scmi_perf_mb_level_get(const struct scmi_protocol_handle *ph, static int scmi_perf_level_get(const struct scmi_protocol_handle *ph, u32 domain, u32 *level, bool poll) { - struct scmi_perf_info *pi = ph->get_priv(ph); - struct perf_dom_info *dom = pi->dom_info + domain; + struct perf_dom_info *dom; + + dom = scmi_perf_domain_lookup(ph, domain); + if (IS_ERR(dom)) + return PTR_ERR(dom);
if (dom->fc_info && dom->fc_info[PERF_FC_LEVEL].get_addr) { *level = ioread32(dom->fc_info[PERF_FC_LEVEL].get_addr); @@ -574,13 +598,14 @@ static int scmi_dvfs_device_opps_add(const struct scmi_protocol_handle *ph, unsigned long freq; struct scmi_opp *opp; struct perf_dom_info *dom; - struct scmi_perf_info *pi = ph->get_priv(ph);
domain = scmi_dev_domain_id(dev); if (domain < 0) - return domain; + return -EINVAL;
- dom = pi->dom_info + domain; + dom = scmi_perf_domain_lookup(ph, domain); + if (IS_ERR(dom)) + return PTR_ERR(dom);
for (opp = dom->opp, idx = 0; idx < dom->opp_count; idx++, opp++) { freq = opp->perf * dom->mult_factor; @@ -603,14 +628,17 @@ static int scmi_dvfs_transition_latency_get(const struct scmi_protocol_handle *ph, struct device *dev) { + int domain; struct perf_dom_info *dom; - struct scmi_perf_info *pi = ph->get_priv(ph); - int domain = scmi_dev_domain_id(dev);
+ domain = scmi_dev_domain_id(dev); if (domain < 0) - return domain; + return -EINVAL; + + dom = scmi_perf_domain_lookup(ph, domain); + if (IS_ERR(dom)) + return PTR_ERR(dom);
- dom = pi->dom_info + domain; /* uS to nS */ return dom->opp[dom->opp_count - 1].trans_latency_us * 1000; } @@ -618,8 +646,11 @@ scmi_dvfs_transition_latency_get(const struct scmi_protocol_handle *ph, static int scmi_dvfs_freq_set(const struct scmi_protocol_handle *ph, u32 domain, unsigned long freq, bool poll) { - struct scmi_perf_info *pi = ph->get_priv(ph); - struct perf_dom_info *dom = pi->dom_info + domain; + struct perf_dom_info *dom; + + dom = scmi_perf_domain_lookup(ph, domain); + if (IS_ERR(dom)) + return PTR_ERR(dom);
return scmi_perf_level_set(ph, domain, freq / dom->mult_factor, poll); } @@ -630,11 +661,14 @@ static int scmi_dvfs_freq_get(const struct scmi_protocol_handle *ph, u32 domain, int ret; u32 level; struct scmi_perf_info *pi = ph->get_priv(ph); - struct perf_dom_info *dom = pi->dom_info + domain;
ret = scmi_perf_level_get(ph, domain, &level, poll); - if (!ret) + if (!ret) { + struct perf_dom_info *dom = pi->dom_info + domain; + + /* Note domain is validated implicitly by scmi_perf_level_get */ *freq = level * dom->mult_factor; + }
return ret; } @@ -643,15 +677,14 @@ static int scmi_dvfs_est_power_get(const struct scmi_protocol_handle *ph, u32 domain, unsigned long *freq, unsigned long *power) { - struct scmi_perf_info *pi = ph->get_priv(ph); struct perf_dom_info *dom; unsigned long opp_freq; int idx, ret = -EINVAL; struct scmi_opp *opp;
- dom = pi->dom_info + domain; - if (!dom) - return -EIO; + dom = scmi_perf_domain_lookup(ph, domain); + if (IS_ERR(dom)) + return PTR_ERR(dom);
for (opp = dom->opp, idx = 0; idx < dom->opp_count; idx++, opp++) { opp_freq = opp->perf * dom->mult_factor; @@ -670,10 +703,16 @@ static int scmi_dvfs_est_power_get(const struct scmi_protocol_handle *ph, static bool scmi_fast_switch_possible(const struct scmi_protocol_handle *ph, struct device *dev) { + int domain; struct perf_dom_info *dom; - struct scmi_perf_info *pi = ph->get_priv(ph);
- dom = pi->dom_info + scmi_dev_domain_id(dev); + domain = scmi_dev_domain_id(dev); + if (domain < 0) + return false; + + dom = scmi_perf_domain_lookup(ph, domain); + if (IS_ERR(dom)) + return false;
return dom->fc_info && dom->fc_info[PERF_FC_LEVEL].set_addr; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sibi Sankar quic_sibis@quicinc.com
[ Upstream commit c3638b851bc1ca0022dca9d6ca4beaa6ef03a216 ]
The perf power scale value would currently be reported as bogowatts if the platform firmware supports microwatt power scale and meets the perf major version requirements. Fix this by populating version information in the driver private data before the call to protocol attributes is made.
CC: Chandra Sekhar Lingutla quic_lingutla@quicinc.com Fixes: 3630cd8130ce ("firmware: arm_scmi: Add SCMI v3.1 perf power-cost in microwatts") Signed-off-by: Sibi Sankar quic_sibis@quicinc.com Reviewed-by: Cristian Marussi cristian.marussi@arm.com Link: https://lore.kernel.org/r/20230811204818.30928-1-quic_sibis@quicinc.com Signed-off-by: Sudeep Holla sudeep.holla@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/arm_scmi/perf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c index 43dd242ecc49c..431bda9165c3d 100644 --- a/drivers/firmware/arm_scmi/perf.c +++ b/drivers/firmware/arm_scmi/perf.c @@ -858,6 +858,8 @@ static int scmi_perf_protocol_init(const struct scmi_protocol_handle *ph) if (!pinfo) return -ENOMEM;
+ pinfo->version = version; + ret = scmi_perf_attributes_get(ph, pinfo); if (ret) return ret; @@ -877,8 +879,6 @@ static int scmi_perf_protocol_init(const struct scmi_protocol_handle *ph) scmi_perf_domain_init_fc(ph, domain, &dom->fc_info); }
- pinfo->version = version; - return ph->set_priv(ph, pinfo); }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Harshit Mogalapalli harshit.m.mogalapalli@oracle.com
[ Upstream commit 779873ec81306d2c40c459fa7c91a5d40655510d ]
When mt6370_chg_field_get() suceeds, ret is set to zero and returning zero when flash led is still in strobe mode looks incorrect.
Fixes: 233cb8a47d65 ("power: supply: mt6370: Add MediaTek MT6370 charger driver") Signed-off-by: Harshit Mogalapalli harshit.m.mogalapalli@oracle.com Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Reviewed-by: ChiaEn Wu chiaen_wu@richtek.com Link: https://lore.kernel.org/r/20230906084815.2827930-1-harshit.m.mogalapalli@ora... Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/power/supply/mt6370-charger.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/supply/mt6370-charger.c b/drivers/power/supply/mt6370-charger.c index f27dae5043f5b..a9641bd3d8cf8 100644 --- a/drivers/power/supply/mt6370-charger.c +++ b/drivers/power/supply/mt6370-charger.c @@ -324,7 +324,7 @@ static int mt6370_chg_toggle_cfo(struct mt6370_priv *priv)
if (fl_strobe) { dev_err(priv->dev, "Flash led is still in strobe mode\n"); - return ret; + return -EINVAL; }
/* cfo off */
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhifeng Tang zhifeng.tang@unisoc.com
[ Upstream commit b7b20cfe6f849c2682c5f7d3f50ede6321a5d04c ]
The thm*_clk have two clock sources 32k and 250k,excluding 32m.
Fixes: af3bd36573e3 ("clk: sprd: Add clocks support for UMS512") Signed-off-by: Zhifeng Tang zhifeng.tang@unisoc.com Acked-by: Chunyan Zhang zhang.lyra@gmail.com Reviewed-by: Baolin Wang baolin.wang@linux.alibaba.com Link: https://lore.kernel.org/r/20230824092624.20020-1-zhifeng.tang@unisoc.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/sprd/ums512-clk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/sprd/ums512-clk.c b/drivers/clk/sprd/ums512-clk.c index fc25bdd85e4ea..f43bb10bd5ae2 100644 --- a/drivers/clk/sprd/ums512-clk.c +++ b/drivers/clk/sprd/ums512-clk.c @@ -800,7 +800,7 @@ static SPRD_MUX_CLK_DATA(uart1_clk, "uart1-clk", uart_parents, 0x250, 0, 3, UMS512_MUX_FLAG);
static const struct clk_parent_data thm_parents[] = { - { .fw_name = "ext-32m" }, + { .fw_name = "ext-32k" }, { .hw = &clk_250k.hw }, }; static SPRD_MUX_CLK_DATA(thm0_clk, "thm0-clk", thm_parents,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Timo Alho talho@nvidia.com
[ Upstream commit a47b44fbb13f5e7a981b4515dcddc93a321ae89c ]
tegra-bpmp clocks driver makes implicit conversion of signed error code to unsigned value in recalc_rate operation. The behavior for recalc_rate, according to it's specification, should be that "If the driver cannot figure out a rate for this clock, it must return 0."
Fixes: ca6f2796eef7 ("clk: tegra: Add BPMP clock driver") Signed-off-by: Timo Alho talho@nvidia.com Signed-off-by: Mikko Perttunen mperttunen@nvidia.com Link: https://lore.kernel.org/r/20230912112951.2330497-1-cyndis@kapsi.fi Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/tegra/clk-bpmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/tegra/clk-bpmp.c b/drivers/clk/tegra/clk-bpmp.c index d82a71f10c2c1..39241662a412a 100644 --- a/drivers/clk/tegra/clk-bpmp.c +++ b/drivers/clk/tegra/clk-bpmp.c @@ -159,7 +159,7 @@ static unsigned long tegra_bpmp_clk_recalc_rate(struct clk_hw *hw,
err = tegra_bpmp_clk_transfer(clk->bpmp, &msg); if (err < 0) - return err; + return 0;
return response.rate; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
[ Upstream commit 8ae9c7a69fa14e95d032e64d8d758e3f85bee132 ]
Do not use spaces for indentation.
Link: https://lore.kernel.org/r/20221002092002.68880-1-krzysztof.kozlowski@linaro.... Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Stable-dep-of: 6469b2feade8 ("ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4") Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi | 6 +-- arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi | 6 +-- arch/arm/boot/dts/omap3-cm-t3517.dts | 12 ++--- arch/arm/boot/dts/omap3-gta04.dtsi | 6 +-- arch/arm/boot/dts/omap3-ldp.dts | 2 +- arch/arm/boot/dts/omap3-n900.dts | 38 +++++++------- arch/arm/boot/dts/omap3-zoom3.dts | 44 ++++++++-------- arch/arm/boot/dts/omap4-cpu-thermal.dtsi | 24 ++++----- arch/arm/boot/dts/omap5-cm-t54.dts | 64 +++++++++++------------ 9 files changed, 101 insertions(+), 101 deletions(-)
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index ce6c235f68ec6..3046ec572632d 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -8,9 +8,9 @@
/ { vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; };
vdd33a: regulator-vdd33a { diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi index e7534fe9c53cf..bc8961f3690f0 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi @@ -12,9 +12,9 @@
/ { vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; };
vdd33a: regulator-vdd33a { diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index 3b8349094baa6..f25c0a84a190c 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -11,12 +11,12 @@ model = "CompuLab CM-T3517"; compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
- vmmc: regulator-vmmc { - compatible = "regulator-fixed"; - regulator-name = "vmmc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + vmmc: regulator-vmmc { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + };
wl12xx_vmmc2: wl12xx_vmmc2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 2dbee248a126f..da578719ac5a2 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -332,7 +332,7 @@ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ >; - }; + };
gps_pins: pinmux_gps_pins { pinctrl-single,pins = < @@ -869,8 +869,8 @@ };
&hdqw1w { - pinctrl-names = "default"; - pinctrl-0 = <&hdq_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&hdq_pins>; };
/* image signal processor within OMAP3 SoC */ diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 36fc8805e0c15..85f33bbb566f9 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -301,5 +301,5 @@
&vaux1 { /* Needed for ads7846 */ - regulator-name = "vcc"; + regulator-name = "vcc"; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index dd79715564498..98a67581bdd23 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -236,27 +236,27 @@ pinctrl-single,pins = <
/* address lines */ - OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */ - OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */ - OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */ + OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */ + OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */ + OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
/* data lines, gpmc_d0..d7 not muxable according to TRM */ - OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */ - OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */ - OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */ - OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */ - OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */ - OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */ - OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */ - OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */ + OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */ + OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */ + OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */ + OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */ + OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */ + OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */ + OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */ + OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
/* * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable * according to TRM. OneNAND seems to require PIN_INPUT on clock. */ - OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */ - OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ - >; + OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */ + OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ + >; };
i2c1_pins: pinmux_i2c1_pins { @@ -738,12 +738,12 @@
si4713: si4713@63 { compatible = "silabs,si4713"; - reg = <0x63>; + reg = <0x63>;
- interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */ - reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */ - vio-supply = <&vio>; - vdd-supply = <&vaux1>; + interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */ + reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */ + vio-supply = <&vio>; + vdd-supply = <&vaux1>; };
bq24150a: bq24150a@6b { diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index 0482676d18306..ce58b1f208e81 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -23,9 +23,9 @@ };
vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; };
vdd33a: regulator-vdd33a { @@ -84,28 +84,28 @@
uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ - OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ - OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ - OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ + OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ + OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ >; };
uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ - OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ - OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ - OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; };
uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ - OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ - OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ + OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; };
@@ -205,22 +205,22 @@ };
&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; };
&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; };
&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; };
&uart4 { - status = "disabled"; + status = "disabled"; };
&usb_otg_hs { diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi index 4d7eeb133dadd..801b4f10350c1 100644 --- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi @@ -13,20 +13,20 @@ cpu_thermal: cpu_thermal { polling-delay = <1000>; /* milliseconds */
/* sensor ID */ - thermal-sensors = <&bandgap 0>; + thermal-sensors = <&bandgap 0>;
cpu_trips: trips { - cpu_alert0: cpu_alert { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_crit: cpu_crit { - temperature = <125000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; + cpu_alert0: cpu_alert { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <125000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + };
cpu_cooling_maps: cooling-maps { map0 { diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index e62ea8b6d53fd..af288d63a26a4 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -84,36 +84,36 @@ };
lcd0: display { - compatible = "startek,startek-kd050c", "panel-dpi"; - label = "lcd"; - - pinctrl-names = "default"; - pinctrl-0 = <&lcd_pins>; - - enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; - - panel-timing { - clock-frequency = <33000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <43>; - vback-porch = <29>; - vfront-porch = <13>; - vsync-len = <3>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_lcd_out>; - }; - }; - }; + compatible = "startek,startek-kd050c", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <43>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_lcd_out>; + }; + }; + };
hdmi0: connector0 { compatible = "hdmi-connector"; @@ -644,8 +644,8 @@ };
&usb3 { - extcon = <&extcon_usb3>; - vbus-supply = <&smps10_out1_reg>; + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; };
&cpu0 {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tony Lindgren tony@atomide.com
[ Upstream commit 6469b2feade8fd82d224dd3734e146536f3e9f0e ]
Fix "thermal_sys: cpu_thermal: Failed to read thermal-sensors cells: -2" error on boot for omap3/4. This is caused by wrong addressing in the dts for bandgap sensor for single sensor instances.
Note that omap4-cpu-thermal.dtsi is shared across omap4/5 and dra7, so we can't just change the addressing in omap4-cpu-thermal.dtsi.
Cc: Ivaylo Dimitrov ivo.g.dimitrov.75@gmail.com Cc: Carl Philipp Klemm philipp@uvos.xyz Cc: Merlijn Wajer merlijn@wizzup.org Cc: Pavel Machek pavel@ucw.cz Reviewed-by: Sebastian Reichel sebastian.reichel@collabora.com Fixes: a761d517bbb1 ("ARM: dts: omap3: Add cpu_thermal zone") Fixes: 0bbf6c54d100 ("arm: dts: add omap4 CPU thermal data") Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/omap3-cpu-thermal.dtsi | 3 +-- arch/arm/boot/dts/omap4-cpu-thermal.dtsi | 5 ++++- arch/arm/boot/dts/omap443x.dtsi | 1 + arch/arm/boot/dts/omap4460.dtsi | 1 + 4 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi index 0da759f8e2c2d..7dd2340bc5e45 100644 --- a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi @@ -12,8 +12,7 @@ cpu_thermal: cpu-thermal { polling-delay = <1000>; /* milliseconds */ coefficients = <0 20000>;
- /* sensor ID */ - thermal-sensors = <&bandgap 0>; + thermal-sensors = <&bandgap>;
cpu_trips: trips { cpu_alert0: cpu_alert { diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi index 801b4f10350c1..d484ec1e4fd86 100644 --- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi @@ -12,7 +12,10 @@ cpu_thermal: cpu_thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */
- /* sensor ID */ + /* + * See 44xx files for single sensor addressing, omap5 and dra7 need + * also sensor ID for addressing. + */ thermal-sensors = <&bandgap 0>;
cpu_trips: trips { diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi index 238aceb799f89..2104170fe2cd7 100644 --- a/arch/arm/boot/dts/omap443x.dtsi +++ b/arch/arm/boot/dts/omap443x.dtsi @@ -69,6 +69,7 @@ };
&cpu_thermal { + thermal-sensors = <&bandgap>; coefficients = <0 20000>; };
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index 1b27a862ae810..a6764750d4476 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -79,6 +79,7 @@ };
&cpu_thermal { + thermal-sensors = <&bandgap>; coefficients = <348 (-9301)>; };
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tony Lindgren tony@atomide.com
[ Upstream commit 4f15fc7c0f28ffcd6e9a56396db6edcdfa4c9925 ]
There is no reg property for pwm-omap-dmtimer.
Cc: Krzysztof Kozlowski krzysztof.kozlowski+dt@linaro.org Cc: Rob Herring robh+dt@kernel.org Signed-off-by: Tony Lindgren tony@atomide.com Stable-dep-of: ac08bda1569b ("ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on boot") Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/am335x-guardian.dts | 3 ++- arch/arm/boot/dts/am3517-evm.dts | 2 +- arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 2 +- arch/arm/boot/dts/motorola-mapphone-common.dtsi | 4 ++-- arch/arm/boot/dts/omap3-gta04.dtsi | 2 +- arch/arm/boot/dts/omap3-n900.dts | 2 +- 6 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts index f6356266564c8..b357364e93f99 100644 --- a/arch/arm/boot/dts/am335x-guardian.dts +++ b/arch/arm/boot/dts/am335x-guardian.dts @@ -103,8 +103,9 @@
};
- guardian_beeper: dmtimer-pwm@7 { + guardian_beeper: pwm-7 { compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; ti,timers = <&timer7>; pinctrl-names = "default"; pinctrl-0 = <&guardian_beeper_pins>; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 35b653014f2b0..7bab0a9dadb30 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -150,7 +150,7 @@ enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */ };
- pwm11: dmtimer-pwm@11 { + pwm11: pwm-11 { compatible = "ti,omap-dmtimer-pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm_pins>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index d3da8b1b473b8..e0cbac500e172 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -59,7 +59,7 @@ }; };
- pwm10: dmtimer-pwm { + pwm10: pwm-10 { compatible = "ti,omap-dmtimer-pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm_pins>; diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index c7a1f3ffc48ca..f7cc8fc678fa5 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -133,7 +133,7 @@ dais = <&mcbsp2_port>, <&mcbsp3_port>; };
- pwm8: dmtimer-pwm-8 { + pwm8: pwm-8 { pinctrl-names = "default"; pinctrl-0 = <&vibrator_direction_pin>;
@@ -143,7 +143,7 @@ ti,clock-source = <0x01>; };
- pwm9: dmtimer-pwm-9 { + pwm9: pwm-9 { pinctrl-names = "default"; pinctrl-0 = <&vibrator_enable_pin>;
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index da578719ac5a2..e0be0fb23f80f 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -147,7 +147,7 @@ pinctrl-0 = <&backlight_pins>; };
- pwm11: dmtimer-pwm { + pwm11: pwm-11 { compatible = "ti,omap-dmtimer-pwm"; ti,timers = <&timer11>; #pwm-cells = <3>; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 98a67581bdd23..89ab08d83261a 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -156,7 +156,7 @@ io-channel-names = "temp", "bsi", "vbat"; };
- pwm9: dmtimer-pwm { + pwm9: pwm-9 { compatible = "ti,omap-dmtimer-pwm"; #pwm-cells = <3>; ti,timers = <&timer9>;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tony Lindgren tony@atomide.com
[ Upstream commit 7fff6f6d6e198ad619fea9dbbe9731999af56070 ]
We want to unify the pinctrl-single pin group nodes to use naming "pins". Otherwise non-standad pin group names will add make dtbs checks errors when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley conor+dt@kernel.org Cc: Krzysztof Kozlowski krzysztof.kozlowski+dt@linaro.org Cc: Rob Herring robh+dt@kernel.org Signed-off-by: Tony Lindgren tony@atomide.com Stable-dep-of: ac08bda1569b ("ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on boot") Signed-off-by: Sasha Levin sashal@kernel.org --- .../boot/dts/motorola-mapphone-common.dtsi | 40 +++++++++---------- arch/arm/boot/dts/omap4-duovero-parlor.dts | 12 +++--- arch/arm/boot/dts/omap4-duovero.dtsi | 18 ++++----- arch/arm/boot/dts/omap4-kc1.dts | 14 +++---- arch/arm/boot/dts/omap4-mcpdm.dtsi | 2 +- arch/arm/boot/dts/omap4-panda-common.dtsi | 30 +++++++------- arch/arm/boot/dts/omap4-panda-es.dts | 8 ++-- arch/arm/boot/dts/omap4-sdp.dts | 36 ++++++++--------- .../boot/dts/omap4-var-om44customboard.dtsi | 24 +++++------ .../arm/boot/dts/omap4-var-som-om44-wlan.dtsi | 6 +-- arch/arm/boot/dts/omap4-var-som-om44.dtsi | 22 +++++----- arch/arm/boot/dts/twl6030_omap4.dtsi | 4 +- 12 files changed, 108 insertions(+), 108 deletions(-)
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index f7cc8fc678fa5..091ba310053eb 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -352,13 +352,13 @@ &omap4_pmx_core {
/* hdmi_hpd.gpio_63 */ - hdmi_hpd_gpio: pinmux_hdmi_hpd_pins { + hdmi_hpd_gpio: hdmi-hpd-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) >; };
- hdq_pins: pinmux_hdq_pins { + hdq_pins: hdq-pins { pinctrl-single,pins = < /* 0x4a100120 hdq_sio.hdq_sio aa27 */ OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) @@ -366,7 +366,7 @@ };
/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ - dss_hdmi_pins: pinmux_dss_hdmi_pins { + dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) @@ -380,7 +380,7 @@ * devices. Off mode value should be tested if we have off mode working * later on. */ - mmc3_pins: pinmux_mmc3_pins { + mmc3_pins: mmc3-pins { pinctrl-single,pins = < /* 0x4a10008e gpmc_wait2.gpio_100 d23 */ OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3) @@ -406,40 +406,40 @@ };
/* gpmc_ncs0.gpio_50 */ - poweroff_gpio: pinmux_poweroff_pins { + poweroff_gpio: poweroff-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3) >; };
/* kpd_row0.gpio_178 */ - tmp105_irq: pinmux_tmp105_irq { + tmp105_irq: tmp105-irq-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) >; };
- usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins { + usb_gpio_mux_sel1: usb-gpio-mux-sel1-pins { /* gpio_60 */ pinctrl-single,pins = < OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) >; };
- touchscreen_pins: pinmux_touchscreen_pins { + touchscreen_pins: touchscreen-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) >; };
- als_proximity_pins: pinmux_als_proximity_pins { + als_proximity_pins: als-proximity-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) >; };
- usb_mdm6600_pins: pinmux_usb_mdm6600_pins { + usb_mdm6600_pins: usb-mdm6600-pins { pinctrl-single,pins = < /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) @@ -476,7 +476,7 @@ >; };
- usb_ulpi_pins: pinmux_usb_ulpi_pins { + usb_ulpi_pins: usb-ulpi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, MUX_MODE7) OMAP4_IOPAD(0x198, MUX_MODE7) @@ -496,7 +496,7 @@ };
/* usb0_otg_dp and usb0_otg_dm */ - usb_utmi_pins: pinmux_usb_utmi_pins { + usb_utmi_pins: usb-utmi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) @@ -521,7 +521,7 @@ * when not used. If needed, we can add rts pin remux later based * on power measurements. */ - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */ OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) @@ -538,7 +538,7 @@ };
/* uart3_tx_irtx and uart3_rx_irrx */ - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, MUX_MODE7) OMAP4_IOPAD(0x198, MUX_MODE7) @@ -557,7 +557,7 @@ >; };
- uart4_pins: pinmux_uart4_pins { + uart4_pins: uart4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */ OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */ @@ -566,7 +566,7 @@ >; };
- mcbsp2_pins: pinmux_mcbsp2_pins { + mcbsp2_pins: mcbsp2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ @@ -575,7 +575,7 @@ >; };
- mcbsp3_pins: pinmux_mcbsp3_pins { + mcbsp3_pins: mcbsp3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */ OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */ @@ -584,13 +584,13 @@ >; };
- vibrator_direction_pin: pinmux_vibrator_direction_pin { + vibrator_direction_pin: vibrator-direction-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ >; };
- vibrator_enable_pin: pinmux_vibrator_enable_pin { + vibrator_enable_pin: vibrator-enable-pins { pinctrl-single,pins = < OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ >; @@ -598,7 +598,7 @@ };
&omap4_pmx_wkup { - usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { + usb_gpio_mux_sel2: usb-gpio-mux-sel2-pins { /* gpio_wk0 */ pinctrl-single,pins = < OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index b294c22177cbf..6d1beb453234e 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -62,33 +62,33 @@ &smsc_pins >;
- led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ >; };
- button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* abe_dmic_din2.gpio_121 */ >; };
- i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; };
- i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; };
- smsc_pins: pinmux_smsc_pins { + smsc_pins: smsc-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3) /* gpmc_a20.gpio_44: IRQ */ OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a21.gpio_45: nReset */ @@ -96,7 +96,7 @@ >; };
- dss_hdmi_pins: pinmux_dss_hdmi_pins { + dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) /* hdmi_hpd.gpio_63 */ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index 805dfd40030dc..b8af455b411a9 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -73,14 +73,14 @@ &hsusbb1_pins >;
- twl6040_pins: pinmux_twl6040_pins { + twl6040_pins: twl6040-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; };
- mcbsp1_pins: pinmux_mcbsp1_pins { + mcbsp1_pins: mcbsp1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ @@ -89,7 +89,7 @@ >; };
- hsusbb1_pins: pinmux_hsusbb1_pins { + hsusbb1_pins: hsusbb1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ @@ -106,34 +106,34 @@ >; };
- hsusb1phy_pins: pinmux_hsusb1phy_pins { + hsusb1phy_pins: hsusb1phy-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3) /* gpmc_wait1.gpio_62 */ >; };
- w2cbw0015_pins: pinmux_w2cbw0015_pins { + w2cbw0015_pins: w2cbw0015-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ >; };
- i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; };
- i2c4_pins: pinmux_i2c4_pins { + i2c4_pins: i2c4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; };
- mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_cmd */ @@ -144,7 +144,7 @@ >; };
- mmc5_pins: pinmux_mmc5_pins { + mmc5_pins: mmc5-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk */ OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_cmd */ diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/omap4-kc1.dts index e59d17b25a1d9..c6b79ba8bbc91 100644 --- a/arch/arm/boot/dts/omap4-kc1.dts +++ b/arch/arm/boot/dts/omap4-kc1.dts @@ -35,42 +35,42 @@ &omap4_pmx_core { pinctrl-names = "default";
- uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */ OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */ >; };
- i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; };
- i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; };
- i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; };
- i2c4_pins: pinmux_i2c4_pins { + i2c4_pins: i2c4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; };
- mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat0 */ OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat1 */ @@ -85,7 +85,7 @@ >; };
- usb_otg_hs_pins: pinmux_usb_otg_hs_pins { + usb_otg_hs_pins: usb-otg-hs-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usba0_otg_ce */ OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) /* usba0_otg_dp */ diff --git a/arch/arm/boot/dts/omap4-mcpdm.dtsi b/arch/arm/boot/dts/omap4-mcpdm.dtsi index 915a9b31a33b4..03ade47431fbe 100644 --- a/arch/arm/boot/dts/omap4-mcpdm.dtsi +++ b/arch/arm/boot/dts/omap4-mcpdm.dtsi @@ -7,7 +7,7 @@ */
&omap4_pmx_core { - mcpdm_pins: pinmux_mcpdm_pins { + mcpdm_pins: mcpdm-pins { pinctrl-single,pins = < /* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */ OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 518652a599bd7..53b99004b19cf 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -237,14 +237,14 @@ &hsusbb1_pins >;
- twl6040_pins: pinmux_twl6040_pins { + twl6040_pins: twl6040-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; };
- mcbsp1_pins: pinmux_mcbsp1_pins { + mcbsp1_pins: mcbsp1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ @@ -253,7 +253,7 @@ >; };
- dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ @@ -288,13 +288,13 @@ >; };
- tfp410_pins: pinmux_tfp410_pins { + tfp410_pins: tfp410-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3) /* gpio_0 */ >; };
- dss_hdmi_pins: pinmux_dss_hdmi_pins { + dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ @@ -302,7 +302,7 @@ >; };
- tpd12s015_pins: pinmux_tpd12s015_pins { + tpd12s015_pins: tpd12s015-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ @@ -310,7 +310,7 @@ >; };
- hsusbb1_pins: pinmux_hsusbb1_pins { + hsusbb1_pins: hsusbb1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ @@ -327,28 +327,28 @@ >; };
- i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; };
- i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; };
- i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; };
- i2c4_pins: pinmux_i2c4_pins { + i2c4_pins: i2c4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ @@ -359,7 +359,7 @@ * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP * REVISIT: Are the pull-ups needed for GPIO 48 and 49? */ - wl12xx_gpio: pinmux_wl12xx_gpio { + wl12xx_gpio: wl12xx-gpio-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */ @@ -369,7 +369,7 @@ };
/* wl12xx GPIO inputs and SDIO pins */ - wl12xx_pins: pinmux_wl12xx_pins { + wl12xx_pins: wl12xx-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ @@ -382,7 +382,7 @@ >; };
- button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_121 */ >; @@ -390,7 +390,7 @@ };
&omap4_pmx_wkup { - led_wkgpio_pins: pinmux_leds_wkpins { + led_wkgpio_pins: leds-wkpins-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 7c6886cd738f0..6c08dff58beae 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -38,26 +38,26 @@ };
&omap4_pmx_core { - led_gpio_pins: gpio_led_pmx { + led_gpio_pins: gpio-led-pmx-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ >; };
- button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */ >; };
- bt_pins: pinmux_bt_pins { + bt_pins: bt-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 - BTEN */ OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 - BTWAKEUP */ >; };
- uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts - HCI */ OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 9e976140f34a6..b2cb93edbc3a6 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -214,7 +214,7 @@ &tpd12s015_pins >;
- uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ @@ -223,7 +223,7 @@ >; };
- uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ @@ -232,21 +232,21 @@ >; };
- uart4_pins: pinmux_uart4_pins { + uart4_pins: uart4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */ OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */ >; };
- twl6040_pins: pinmux_twl6040_pins { + twl6040_pins: twl6040-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; };
- dmic_pins: pinmux_dmic_pins { + dmic_pins: dmic-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */ OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */ @@ -255,7 +255,7 @@ >; };
- mcbsp1_pins: pinmux_mcbsp1_pins { + mcbsp1_pins: mcbsp1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ @@ -264,7 +264,7 @@ >; };
- mcbsp2_pins: pinmux_mcbsp2_pins { + mcbsp2_pins: mcbsp2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */ OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */ @@ -273,7 +273,7 @@ >; };
- mcspi1_pins: pinmux_mcspi1_pins { + mcspi1_pins: mcspi1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ @@ -282,7 +282,7 @@ >; };
- dss_hdmi_pins: pinmux_dss_hdmi_pins { + dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ @@ -290,7 +290,7 @@ >; };
- tpd12s015_pins: pinmux_tpd12s015_pins { + tpd12s015_pins: tpd12s015-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ @@ -298,28 +298,28 @@ >; };
- i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; };
- i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; };
- i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; };
- i2c4_pins: pinmux_i2c4_pins { + i2c4_pins: i2c4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ @@ -327,14 +327,14 @@ };
/* wl12xx GPIO output for WLAN_EN */ - wl12xx_gpio: pinmux_wl12xx_gpio { + wl12xx_gpio: wl12xx-gpio-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */ >; };
/* wl12xx GPIO inputs and SDIO pins */ - wl12xx_pins: pinmux_wl12xx_pins { + wl12xx_pins: wl12xx-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ @@ -347,13 +347,13 @@ };
/* gpio_48 for ENET_ENABLE */ - enet_enable_gpio: pinmux_enet_enable_gpio { + enet_enable_gpio: enet-enable-gpio-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* gpmc_a24.gpio_48 */ >; };
- ks8851_pins: pinmux_ks8851_pins { + ks8851_pins: ks8851-pins { pinctrl-single,pins = < /* ENET_INT */ OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.gpio_34 */ diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi index 458cb53dd3d18..cadc7e02592bf 100644 --- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi +++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi @@ -60,7 +60,7 @@ };
&omap4_pmx_core { - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi1_cs2.uart1_cts */ OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1) /* mcspi1_cs3.uart1_rts */ @@ -69,7 +69,7 @@ >; };
- mcspi1_pins: pinmux_mcspi1_pins { + mcspi1_pins: mcspi1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ @@ -78,13 +78,13 @@ >; };
- mcasp_pins: pinmux_mcsasp_pins { + mcasp_pins: mcsasp-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2) /* mcbsp2_dr.abe_mcasp_axr */ >; };
- dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ @@ -117,7 +117,7 @@ >; };
- dss_hdmi_pins: pinmux_dss_hdmi_pins { + dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ @@ -125,14 +125,14 @@ >; };
- i2c4_pins: pinmux_i2c4_pins { + i2c4_pins: i2c4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; };
- mmc5_pins: pinmux_mmc5_pins { + mmc5_pins: mmc5-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3) /* abe_mcbsp2_clkx.gpio_110 */ OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ @@ -144,32 +144,32 @@ >; };
- gpio_led_pins: pinmux_gpio_led_pins { + gpio_led_pins: gpio-led-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3) /* kpd_col4.gpio_172 */ OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) /* kpd_col5.gpio_173 */ >; };
- gpio_key_pins: pinmux_gpio_key_pins { + gpio_key_pins: gpio-key-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3) /* sys_boot0.gpio_184 */ >; };
- ks8851_irq_pins: pinmux_ks8851_irq_pins { + ks8851_irq_pins: ks8851-irq-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3) /* kpd_col3.gpio_171 */ >; };
- hdmi_hpd_pins: pinmux_hdmi_hpd_pins { + hdmi_hpd_pins: hdmi-hpd-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ >; };
- backlight_pins: pinmux_backlight_pins { + backlight_pins: backlight-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ >; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index d0032213101e6..de779d2d7c3e9 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -19,7 +19,7 @@ };
&omap4_pmx_core { - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ @@ -28,7 +28,7 @@ >; };
- wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins { + wl12xx_ctrl_pins: wl12xx-ctrl-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a17.gpio_41 (WLAN_IRQ) */ OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3) /* gpmc_a18.gpio_42 (BT_EN) */ @@ -36,7 +36,7 @@ >; };
- mmc4_pins: pinmux_mmc4_pins { + mmc4_pins: mmc4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_clk.sdmmc4_clk */ OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_simo.sdmmc4_cmd */ diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 334cbbaa5b8b0..37d56b3010cff 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -65,21 +65,21 @@ &hsusbb1_pins >;
- twl6040_pins: pinmux_twl6040_pins { + twl6040_pins: twl6040-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3) /* fref_clk2_out.gpio_182 */ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; };
- tsc2004_pins: pinmux_tsc2004_pins { + tsc2004_pins: tsc2004-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3) /* gpmc_ncs4.gpio_101 (irq) */ OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3) /* gpmc_ncs5.gpio_102 (rst) */ >; };
- uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ @@ -88,7 +88,7 @@ >; };
- hsusbb1_pins: pinmux_hsusbb1_pins { + hsusbb1_pins: hsusbb1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ @@ -105,27 +105,27 @@ >; };
- hsusbb1_phy_rst_pins: pinmux_hsusbb1_phy_rst_pins { + hsusbb1_phy_rst_pins: hsusbb1-phy-rst-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3) /* kpd_row2.gpio_177 */ >; };
- i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; };
- i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; };
- mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -144,19 +144,19 @@ &lan7500_rst_pins >;
- hsusbb1_phy_clk_pins: pinmux_hsusbb1_phy_clk_pins { + hsusbb1_phy_clk_pins: hsusbb1-phy-clk-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0) /* fref_clk3_out */ >; };
- hsusbb1_hub_rst_pins: pinmux_hsusbb1_hub_rst_pins { + hsusbb1_hub_rst_pins: hsusbb1-hub-rst-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3) /* gpio_wk1 */ >; };
- lan7500_rst_pins: pinmux_lan7500_rst_pins { + lan7500_rst_pins: lan7500-rst-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3) /* gpio_wk0 */ >; diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi index 5730e46b00677..64e38c7c8be70 100644 --- a/arch/arm/boot/dts/twl6030_omap4.dtsi +++ b/arch/arm/boot/dts/twl6030_omap4.dtsi @@ -19,7 +19,7 @@ };
&omap4_pmx_wkup { - twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + twl6030_wkup_pins: twl6030-wkup-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ >; @@ -27,7 +27,7 @@ };
&omap4_pmx_core { - twl6030_pins: pinmux_twl6030_pins { + twl6030_pins: twl6030-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ >;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tony Lindgren tony@atomide.com
[ Upstream commit ac08bda1569b06b7a62c7b4dd00d4c3b28ceaaec ]
Commit 0840242e8875 ("ARM: dts: Configure clock parent for pwm vibra") attempted to fix the PWM settings but ended up causin an additional clock reparenting error:
clk: failed to reparent abe-clkctrl:0060:24 to sys_clkin_ck: -22
Only timer9 is in the PER domain and can use the sys_clkin_ck clock source. For timer8, the there is no sys_clkin_ck available as it's in the ABE domain, instead it should use syc_clk_div_ck. However, for power management, we want to use the always on sys_32k_ck instead.
Cc: Ivaylo Dimitrov ivo.g.dimitrov.75@gmail.com Cc: Carl Philipp Klemm philipp@uvos.xyz Cc: Merlijn Wajer merlijn@wizzup.org Cc: Pavel Machek pavel@ucw.cz Reviewed-by: Sebastian Reichel sebastian.reichel@collabora.com Fixes: 0840242e8875 ("ARM: dts: Configure clock parent for pwm vibra") Depends-on: 61978617e905 ("ARM: dts: Add minimal support for Droid Bionic xt875") Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/motorola-mapphone-common.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index 091ba310053eb..d69f0f4b4990d 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -614,12 +614,12 @@ /* Configure pwm clock source for timers 8 & 9 */ &timer8 { assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; - assigned-clock-parents = <&sys_clkin_ck>; + assigned-clock-parents = <&sys_32k_ck>; };
&timer9 { assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; - assigned-clock-parents = <&sys_clkin_ck>; + assigned-clock-parents = <&sys_32k_ck>; };
/*
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tony Lindgren tony@atomide.com
[ Upstream commit e5deb8f76e64d94ccef715e75ebafffd0c312d80 ]
The uarts should be tagged with SYSC_QUIRK_SWSUP_SIDLE instead of SYSC_QUIRK_SWSUP_SIDLE_ACT. The difference is that SYSC_QUIRK_SWSUP_SIDLE is used to force idle target modules rather than block idle during usage.
The SYSC_QUIRK_SWSUP_SIDLE_ACT should disable autoidle and wake-up when a target module is active, and configure autoidle and wake-up when a target module is inactive. We are missing configuring the target module on sysc_disable_module(), and missing toggling of the wake-up bit.
Let's fix the issue to allow uart wake-up to work.
Fixes: fb685f1c190e ("bus: ti-sysc: Handle swsup idle mode quirks") Tested-by: Dhruva Gole d-gole@ti.com Tested-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bus/ti-sysc.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index d56e7b61bb5a9..59a2fe2448f17 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1120,6 +1120,11 @@ static int sysc_enable_module(struct device *dev) if (ddata->cfg.quirks & (SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_SIDLE_ACT)) { best_mode = SYSC_IDLE_NO; + + /* Clear WAKEUP */ + if (regbits->enwkup_shift >= 0 && + ddata->cfg.sysc_val & BIT(regbits->enwkup_shift)) + reg &= ~BIT(regbits->enwkup_shift); } else { best_mode = fls(ddata->cfg.sidlemodes) - 1; if (best_mode > SYSC_IDLE_MASK) { @@ -1247,6 +1252,13 @@ static int sysc_disable_module(struct device *dev) } }
+ if (ddata->cfg.quirks & SYSC_QUIRK_SWSUP_SIDLE_ACT) { + /* Set WAKEUP */ + if (regbits->enwkup_shift >= 0 && + ddata->cfg.sysc_val & BIT(regbits->enwkup_shift)) + reg |= BIT(regbits->enwkup_shift); + } + reg &= ~(SYSC_IDLE_MASK << regbits->sidle_shift); reg |= best_mode << regbits->sidle_shift; if (regbits->autoidle_shift >= 0 && @@ -1541,16 +1553,16 @@ struct sysc_revision_quirk { static const struct sysc_revision_quirk sysc_revision_quirks[] = { /* These drivers need to be fixed to not use pm_runtime_irq_safe() */ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000046, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), /* Uarts on omap4 and later */ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47424e03, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
/* Quirks that need to be set based on the module address */ SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter dan.carpenter@linaro.org
[ Upstream commit e35059949daa83f8dadf710d0f829ab3c3a72fe2 ]
This function is supposed to return 0 for success instead of returning the val->intval. This makes it the same as the other case statements in this function.
Fixes: 81196e2e57fc ("power: supply: ucs1002: fix some health status issues") Signed-off-by: Dan Carpenter dan.carpenter@linaro.org Link: https://lore.kernel.org/r/687f64a4-4c6e-4536-8204-98ad1df934e5@moroto.mounta... Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/power/supply/ucs1002_power.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/ucs1002_power.c b/drivers/power/supply/ucs1002_power.c index ef673ec3db568..332cb50d9fb4f 100644 --- a/drivers/power/supply/ucs1002_power.c +++ b/drivers/power/supply/ucs1002_power.c @@ -384,7 +384,8 @@ static int ucs1002_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_USB_TYPE: return ucs1002_get_usb_type(info, val); case POWER_SUPPLY_PROP_HEALTH: - return val->intval = info->health; + val->intval = info->health; + return 0; case POWER_SUPPLY_PROP_PRESENT: val->intval = info->present; return 0;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit e527adfb9b7d9d05a4577c116519e59a2bda4b05 ]
If mbox_request_channel_byname() fails, the memory allocated a few lines above still need to be freed before going to the error handling path.
Fixes: 046326989a18 ("firmware: imx: Save channel name for further use") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Reviewed-by: Daniel Baluta daniel.baluta@nxp.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/imx/imx-dsp.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/firmware/imx/imx-dsp.c b/drivers/firmware/imx/imx-dsp.c index a6c06d7476c32..1f410809d3ee4 100644 --- a/drivers/firmware/imx/imx-dsp.c +++ b/drivers/firmware/imx/imx-dsp.c @@ -115,6 +115,7 @@ static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc) dsp_chan->idx = i % 2; dsp_chan->ch = mbox_request_channel_byname(cl, chan_name); if (IS_ERR(dsp_chan->ch)) { + kfree(dsp_chan->name); ret = PTR_ERR(dsp_chan->ch); if (ret != -EPROBE_DEFER) dev_err(dev, "Failed to request mbox chan %s ret %d\n",
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov jcmvbkbc@gmail.com
[ Upstream commit 494e87ffa0159b3f879694a9231089707792a44d ]
When variant FSF is set, XCHAL_HAVE_DIV32 is not defined. Add default definition for that macro to prevent build warnings:
arch/xtensa/lib/divsi3.S:9:5: warning: "XCHAL_HAVE_DIV32" is not defined, evaluates to 0 [-Wundef] 9 | #if XCHAL_HAVE_DIV32 arch/xtensa/lib/modsi3.S:9:5: warning: "XCHAL_HAVE_DIV32" is not defined, evaluates to 0 [-Wundef] 9 | #if XCHAL_HAVE_DIV32
Fixes: 173d6681380a ("xtensa: remove extra header files") Suggested-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Max Filippov jcmvbkbc@gmail.com Reported-by: kernel test robot lkp@intel.com Closes: lore.kernel.org/r/202309150556.t0yCdv3g-lkp@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/include/asm/core.h | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/xtensa/include/asm/core.h b/arch/xtensa/include/asm/core.h index 7cef85ad9741a..25293269e1edd 100644 --- a/arch/xtensa/include/asm/core.h +++ b/arch/xtensa/include/asm/core.h @@ -6,6 +6,10 @@
#include <variant/core.h>
+#ifndef XCHAL_HAVE_DIV32 +#define XCHAL_HAVE_DIV32 0 +#endif + #ifndef XCHAL_HAVE_EXCLUSIVE #define XCHAL_HAVE_EXCLUSIVE 0 #endif
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit 1b59efeb59851277266318f4e0132aa61ce3455e ]
Make 2 functions static to prevent build warnings:
arch/xtensa/platforms/iss/network.c:204:16: warning: no previous prototype for 'tuntap_protocol' [-Wmissing-prototypes] 204 | unsigned short tuntap_protocol(struct sk_buff *skb) arch/xtensa/platforms/iss/network.c:444:6: warning: no previous prototype for 'iss_net_user_timer_expire' [-Wmissing-prototypes] 444 | void iss_net_user_timer_expire(struct timer_list *unused)
Fixes: 7282bee78798 ("xtensa: Architecture support for Tensilica Xtensa Part 8") Fixes: d8479a21a98b ("xtensa: Convert timers to use timer_setup()") Signed-off-by: Randy Dunlap rdunlap@infradead.org Cc: Chris Zankel chris@zankel.net Cc: Max Filippov jcmvbkbc@gmail.com Message-Id: 20230920052139.10570-14-rdunlap@infradead.org Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/platforms/iss/network.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c index 119345eeb04c9..bea539f9039a2 100644 --- a/arch/xtensa/platforms/iss/network.c +++ b/arch/xtensa/platforms/iss/network.c @@ -201,7 +201,7 @@ static int tuntap_write(struct iss_net_private *lp, struct sk_buff **skb) return simc_write(lp->tp.info.tuntap.fd, (*skb)->data, (*skb)->len); }
-unsigned short tuntap_protocol(struct sk_buff *skb) +static unsigned short tuntap_protocol(struct sk_buff *skb) { return eth_type_trans(skb, skb->dev); } @@ -441,7 +441,7 @@ static int iss_net_change_mtu(struct net_device *dev, int new_mtu) return -EINVAL; }
-void iss_net_user_timer_expire(struct timer_list *unused) +static void iss_net_user_timer_expire(struct timer_list *unused) { }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit 54d3d7d363823782c3444ddc41bb8cf1edc80514 ]
Drop the -I<include-dir> options to prevent build warnings since there is not boot/include directory:
cc1: warning: arch/xtensa/boot/include: No such file or directory [-Wmissing-include-dirs]
Fixes: 437374e9a950 ("restore arch/{ppc/xtensa}/boot cflags") Fixes: 4bedea945451 ("xtensa: Architecture support for Tensilica Xtensa Part 2") Signed-off-by: Randy Dunlap rdunlap@infradead.org Cc: Chris Zankel chris@zankel.net Cc: Max Filippov jcmvbkbc@gmail.com Message-Id: 20230920052139.10570-15-rdunlap@infradead.org Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/boot/Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile index a65b7a9ebff28..d8b0fadf429a9 100644 --- a/arch/xtensa/boot/Makefile +++ b/arch/xtensa/boot/Makefile @@ -9,8 +9,7 @@
# KBUILD_CFLAGS used when building rest of boot (takes effect recursively) -KBUILD_CFLAGS += -fno-builtin -Iarch/$(ARCH)/boot/include -HOSTFLAGS += -Iarch/$(ARCH)/boot/include +KBUILD_CFLAGS += -fno-builtin
subdir-y := lib targets += vmlinux.bin vmlinux.bin.gz
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit 9aecda97ec3deecbfa7670877c8ddfd3d0fc87c4 ]
Even when a variant has one or more of these defines set to 1, the multiplier code paths are not used. Change the expression so that the correct code paths are used.
arch/xtensa/lib/umulsidi3.S:44:38: warning: "XCHAL_NO_MUL" is not defined, evaluates to 0 [-Wundef] 44 | #if defined(__XTENSA_CALL0_ABI__) && XCHAL_NO_MUL arch/xtensa/lib/umulsidi3.S:145:38: warning: "XCHAL_NO_MUL" is not defined, evaluates to 0 [-Wundef] 145 | #if defined(__XTENSA_CALL0_ABI__) && XCHAL_NO_MUL arch/xtensa/lib/umulsidi3.S:159:5: warning: "XCHAL_NO_MUL" is not defined, evaluates to 0 [-Wundef] 159 | #if XCHAL_NO_MUL
Fixes: 8939c58d68f9 ("xtensa: add __umulsidi3 helper") Signed-off-by: Randy Dunlap rdunlap@infradead.org Cc: Chris Zankel chris@zankel.net Cc: Max Filippov jcmvbkbc@gmail.com Message-Id: 20230920052139.10570-16-rdunlap@infradead.org Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/lib/umulsidi3.S | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/xtensa/lib/umulsidi3.S b/arch/xtensa/lib/umulsidi3.S index 1360816479427..4d9ba2387de0f 100644 --- a/arch/xtensa/lib/umulsidi3.S +++ b/arch/xtensa/lib/umulsidi3.S @@ -3,7 +3,9 @@ #include <asm/asmmacro.h> #include <asm/core.h>
-#if !XCHAL_HAVE_MUL16 && !XCHAL_HAVE_MUL32 && !XCHAL_HAVE_MAC16 +#if XCHAL_HAVE_MUL16 || XCHAL_HAVE_MUL32 || XCHAL_HAVE_MAC16 +#define XCHAL_NO_MUL 0 +#else #define XCHAL_NO_MUL 1 #endif
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov jcmvbkbc@gmail.com
[ Upstream commit f54d02c8f2cc4b46ba2a3bd8252a6750453b6f2b ]
Add function prototype for gunzip() to the boot library code and make exit() and zalloc() static.
arch/xtensa/boot/lib/zmem.c:8:6: warning: no previous prototype for 'exit' [-Wmissing-prototypes] 8 | void exit (void) arch/xtensa/boot/lib/zmem.c:13:7: warning: no previous prototype for 'zalloc' [-Wmissing-prototypes] 13 | void *zalloc(unsigned size) arch/xtensa/boot/lib/zmem.c:35:6: warning: no previous prototype for 'gunzip' [-Wmissing-prototypes] 35 | void gunzip (void *dst, int dstlen, unsigned char *src, int *lenp)
Fixes: 4bedea945451 ("xtensa: Architecture support for Tensilica Xtensa Part 2") Fixes: e7d163f76665 ("xtensa: Removed local copy of zlib and fixed O= support") Suggested-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/boot/lib/zmem.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/xtensa/boot/lib/zmem.c b/arch/xtensa/boot/lib/zmem.c index e3ecd743c5153..b89189355122a 100644 --- a/arch/xtensa/boot/lib/zmem.c +++ b/arch/xtensa/boot/lib/zmem.c @@ -4,13 +4,14 @@ /* bits taken from ppc */
extern void *avail_ram, *end_avail; +void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp);
-void exit (void) +static void exit(void) { for (;;); }
-void *zalloc(unsigned size) +static void *zalloc(unsigned int size) { void *p = avail_ram;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Morgan macromorgan@hotmail.com
[ Upstream commit 488ef44c068e79752dba8eda0b75f524f111a695 ]
Dan Carpenter reports that the Smatch static checker warning has found that there is another refcount leak in the probe function. While of_node_put() was added in one of the return paths, it should in fact be added for ALL return paths that return an error and at driver removal time.
Fixes: 54c03bfd094f ("power: supply: Fix refcount leak in rk817_charger_probe") Reported-by: Dan Carpenter dan.carpenter@oracle.com Closes: https://lore.kernel.org/linux-pm/dc0bb0f8-212d-4be7-be69-becd2a3f9a80@kili.m... Signed-off-by: Chris Morgan macromorgan@hotmail.com Link: https://lore.kernel.org/r/20230920145644.57964-1-macroalpha82@gmail.com Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/power/supply/rk817_charger.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/power/supply/rk817_charger.c b/drivers/power/supply/rk817_charger.c index f1b431aa0e4f2..e30ef601d91da 100644 --- a/drivers/power/supply/rk817_charger.c +++ b/drivers/power/supply/rk817_charger.c @@ -1058,6 +1058,13 @@ static void rk817_charging_monitor(struct work_struct *work) queue_delayed_work(system_wq, &charger->work, msecs_to_jiffies(8000)); }
+static void rk817_cleanup_node(void *data) +{ + struct device_node *node = data; + + of_node_put(node); +} + static int rk817_charger_probe(struct platform_device *pdev) { struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent); @@ -1074,11 +1081,13 @@ static int rk817_charger_probe(struct platform_device *pdev) if (!node) return -ENODEV;
+ ret = devm_add_action_or_reset(&pdev->dev, rk817_cleanup_node, node); + if (ret) + return ret; + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); - if (!charger) { - of_node_put(node); + if (!charger) return -ENOMEM; - }
charger->rk808 = rk808;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Gray bgray@linux.ibm.com
[ Upstream commit 69608683a65be5322ef44091eaeb9890472b2eea ]
The CLEAN macro was added in 337f1e36 to prevent the
Makefile:50: warning: overriding recipe for target 'clean' ../../lib.mk:124: warning: ignoring old recipe for target 'clean'
style warnings. Expand it's use to fix another case of redefining a target directly.
Signed-off-by: Benjamin Gray bgray@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://msgid.link/20230228000709.124727-2-bgray@linux.ibm.com Stable-dep-of: 58b33e78a317 ("selftests/powerpc: Fix emit_tests to work with run_kselftest.sh") Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/powerpc/pmu/Makefile | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/powerpc/pmu/Makefile b/tools/testing/selftests/powerpc/pmu/Makefile index 30803353bd7cc..d2c1accc2e69c 100644 --- a/tools/testing/selftests/powerpc/pmu/Makefile +++ b/tools/testing/selftests/powerpc/pmu/Makefile @@ -46,11 +46,14 @@ override define INSTALL_RULE TARGET=event_code_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET install endef
-clean: +DEFAULT_CLEAN := $(CLEAN) +override define CLEAN + $(DEFAULT_CLEAN) $(RM) $(TEST_GEN_PROGS) $(OUTPUT)/loop.o TARGET=ebb; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean TARGET=sampling_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean TARGET=event_code_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean +endef
ebb: TARGET=$@; BUILD_TARGET=$$OUTPUT/$$TARGET; mkdir -p $$BUILD_TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -k -C $$TARGET all @@ -61,4 +64,4 @@ sampling_tests: event_code_tests: TARGET=$@; BUILD_TARGET=$$OUTPUT/$$TARGET; mkdir -p $$BUILD_TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -k -C $$TARGET all
-.PHONY: all run_tests clean ebb sampling_tests event_code_tests +.PHONY: all run_tests ebb sampling_tests event_code_tests
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Gray bgray@linux.ibm.com
[ Upstream commit 4ecd0868c5138238dec8a1549bb6ff8e5b48208b ]
Make supports passing the 'jobserver' (parallel make support) to child invocations of make when either 1. The target command uses $(MAKE) directly 2. The command starts with '+'
This context is not passed through expansions that result in $(MAKE), so the macros used in several places fail to pass on the jobserver context. Warnings are also raised by the child mentioning this.
Prepend macros lines that invoke $(MAKE) with '+' to allow passing the jobserver context to these children.
Signed-off-by: Benjamin Gray bgray@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://msgid.link/20230228000709.124727-3-bgray@linux.ibm.com Stable-dep-of: 58b33e78a317 ("selftests/powerpc: Fix emit_tests to work with run_kselftest.sh") Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/powerpc/Makefile | 8 +++---- tools/testing/selftests/powerpc/pmu/Makefile | 24 ++++++++++---------- 2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile index 6ba95cd19e423..ae2bfc0d822f2 100644 --- a/tools/testing/selftests/powerpc/Makefile +++ b/tools/testing/selftests/powerpc/Makefile @@ -45,28 +45,28 @@ $(SUB_DIRS): include ../lib.mk
override define RUN_TESTS - @for TARGET in $(SUB_DIRS); do \ + +@for TARGET in $(SUB_DIRS); do \ BUILD_TARGET=$(OUTPUT)/$$TARGET; \ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests;\ done; endef
override define INSTALL_RULE - @for TARGET in $(SUB_DIRS); do \ + +@for TARGET in $(SUB_DIRS); do \ BUILD_TARGET=$(OUTPUT)/$$TARGET; \ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET install;\ done; endef
override define EMIT_TESTS - @for TARGET in $(SUB_DIRS); do \ + +@for TARGET in $(SUB_DIRS); do \ BUILD_TARGET=$(OUTPUT)/$$TARGET; \ $(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET emit_tests;\ done; endef
override define CLEAN - @for TARGET in $(SUB_DIRS); do \ + +@for TARGET in $(SUB_DIRS); do \ BUILD_TARGET=$(OUTPUT)/$$TARGET; \ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean; \ done; diff --git a/tools/testing/selftests/powerpc/pmu/Makefile b/tools/testing/selftests/powerpc/pmu/Makefile index d2c1accc2e69c..2b95e44d20ff9 100644 --- a/tools/testing/selftests/powerpc/pmu/Makefile +++ b/tools/testing/selftests/powerpc/pmu/Makefile @@ -25,34 +25,34 @@ $(OUTPUT)/per_event_excludes: ../utils.c DEFAULT_RUN_TESTS := $(RUN_TESTS) override define RUN_TESTS $(DEFAULT_RUN_TESTS) - TARGET=ebb; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests - TARGET=sampling_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests - TARGET=event_code_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests + +TARGET=ebb; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests + +TARGET=sampling_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests + +TARGET=event_code_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests endef
DEFAULT_EMIT_TESTS := $(EMIT_TESTS) override define EMIT_TESTS $(DEFAULT_EMIT_TESTS) - TARGET=ebb; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET emit_tests - TARGET=sampling_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET emit_tests - TARGET=event_code_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET emit_tests + +TARGET=ebb; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET emit_tests + +TARGET=sampling_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET emit_tests + +TARGET=event_code_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET emit_tests endef
DEFAULT_INSTALL_RULE := $(INSTALL_RULE) override define INSTALL_RULE $(DEFAULT_INSTALL_RULE) - TARGET=ebb; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET install - TARGET=sampling_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET install - TARGET=event_code_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET install + +TARGET=ebb; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET install + +TARGET=sampling_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET install + +TARGET=event_code_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET install endef
DEFAULT_CLEAN := $(CLEAN) override define CLEAN $(DEFAULT_CLEAN) $(RM) $(TEST_GEN_PROGS) $(OUTPUT)/loop.o - TARGET=ebb; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean - TARGET=sampling_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean - TARGET=event_code_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean + +TARGET=ebb; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean + +TARGET=sampling_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean + +TARGET=event_code_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean endef
ebb:
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman mpe@ellerman.id.au
[ Upstream commit 58b33e78a31782ffe25d404d5eba9a45fe636e27 ]
In order to use run_kselftest.sh the list of tests must be emitted to populate kselftest-list.txt.
The powerpc Makefile is written to use EMIT_TESTS. But support for EMIT_TESTS was dropped in commit d4e59a536f50 ("selftests: Use runner.sh for emit targets"). Although prior to that commit a548de0fe8e1 ("selftests: lib.mk: add test execute bit check to EMIT_TESTS") had already broken run_kselftest.sh for powerpc due to the executable check using the wrong path.
It can be fixed by replacing the EMIT_TESTS definitions with actual emit_tests rules in the powerpc Makefiles. This makes run_kselftest.sh able to run powerpc tests:
$ cd linux $ export ARCH=powerpc $ export CROSS_COMPILE=powerpc64le-linux-gnu- $ make headers $ make -j -C tools/testing/selftests install $ grep -c "^powerpc" tools/testing/selftests/kselftest_install/kselftest-list.txt 182
Fixes: d4e59a536f50 ("selftests: Use runner.sh for emit targets") Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://msgid.link/20230921072623.828772-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/powerpc/Makefile | 7 +++---- tools/testing/selftests/powerpc/pmu/Makefile | 11 ++++++----- 2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile index ae2bfc0d822f2..c8c085fa05b05 100644 --- a/tools/testing/selftests/powerpc/Makefile +++ b/tools/testing/selftests/powerpc/Makefile @@ -58,12 +58,11 @@ override define INSTALL_RULE done; endef
-override define EMIT_TESTS +emit_tests: +@for TARGET in $(SUB_DIRS); do \ BUILD_TARGET=$(OUTPUT)/$$TARGET; \ - $(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET emit_tests;\ + $(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET $@;\ done; -endef
override define CLEAN +@for TARGET in $(SUB_DIRS); do \ @@ -76,4 +75,4 @@ endef tags: find . -name '*.c' -o -name '*.h' | xargs ctags
-.PHONY: tags $(SUB_DIRS) +.PHONY: tags $(SUB_DIRS) emit_tests diff --git a/tools/testing/selftests/powerpc/pmu/Makefile b/tools/testing/selftests/powerpc/pmu/Makefile index 2b95e44d20ff9..a284fa874a9f1 100644 --- a/tools/testing/selftests/powerpc/pmu/Makefile +++ b/tools/testing/selftests/powerpc/pmu/Makefile @@ -30,13 +30,14 @@ override define RUN_TESTS +TARGET=event_code_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests endef
-DEFAULT_EMIT_TESTS := $(EMIT_TESTS) -override define EMIT_TESTS - $(DEFAULT_EMIT_TESTS) +emit_tests: + for TEST in $(TEST_GEN_PROGS); do \ + BASENAME_TEST=`basename $$TEST`; \ + echo "$(COLLECTION):$$BASENAME_TEST"; \ + done +TARGET=ebb; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET emit_tests +TARGET=sampling_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET emit_tests +TARGET=event_code_tests; BUILD_TARGET=$$OUTPUT/$$TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET emit_tests -endef
DEFAULT_INSTALL_RULE := $(INSTALL_RULE) override define INSTALL_RULE @@ -64,4 +65,4 @@ sampling_tests: event_code_tests: TARGET=$@; BUILD_TARGET=$$OUTPUT/$$TARGET; mkdir -p $$BUILD_TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -k -C $$TARGET all
-.PHONY: all run_tests ebb sampling_tests event_code_tests +.PHONY: all run_tests ebb sampling_tests event_code_tests emit_tests
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nathan Rossi nathan.rossi@digi.com
[ Upstream commit 9d1e8275a28f51599d754ce661c91e0a689c0234 ]
Commit 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the register") added configuration to enable the OCOTP clock before attempting to read from the associated registers.
This same kexec issue is present with the imx8m SoCs that use the imx8mm_soc_uid function (e.g. imx8mp). This requires the imx8mm_soc_uid function to configure the OCOTP clock before accessing the associated registers. This change implements the same clock enable functionality that is present in the imx8mq_soc_revision function for the imx8mm_soc_uid function.
Signed-off-by: Nathan Rossi nathan.rossi@digi.com Reviewed-by: Fabio Estevam festevam@gmail.com Fixes: 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the register") Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/imx/soc-imx8m.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c index 32ed9dc88e455..08197b03955dd 100644 --- a/drivers/soc/imx/soc-imx8m.c +++ b/drivers/soc/imx/soc-imx8m.c @@ -100,6 +100,7 @@ static void __init imx8mm_soc_uid(void) { void __iomem *ocotp_base; struct device_node *np; + struct clk *clk; u32 offset = of_machine_is_compatible("fsl,imx8mp") ? IMX8MP_OCOTP_UID_OFFSET : 0;
@@ -109,11 +110,20 @@ static void __init imx8mm_soc_uid(void)
ocotp_base = of_iomap(np, 0); WARN_ON(!ocotp_base); + clk = of_clk_get_by_name(np, NULL); + if (IS_ERR(clk)) { + WARN_ON(IS_ERR(clk)); + return; + } + + clk_prepare_enable(clk);
soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH + offset); soc_uid <<= 32; soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW + offset);
+ clk_disable_unprepare(clk); + clk_put(clk); iounmap(ocotp_base); of_node_put(np); }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rob Herring robh@kernel.org
[ Upstream commit f09752eaf0e8f8befc26b44c4d3e15633e56d16a ]
imx8mm-prt8mm.dts was not getting built. Add it to the build.
Fixes: 58497d7a13ed ("arm64: dts: imx: add Protonic PRT8MM board") Signed-off-by: Rob Herring robh@kernel.org Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/freescale/Makefile | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 3ea9edc87909a..ac6f780dc1914 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-osm-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-prt8mm.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sudeep Holla sudeep.holla@arm.com
[ Upstream commit 9dda1178479aa0a73fe0eaabfe2d9a1c603cfeed ]
As per the FF-A specification: section "Usage of other memory region attributes", in a transaction to donate memory or lend memory to a single borrower, if the receiver is a PE or Proxy endpoint, the owner must not specify the attributes and the relayer will return INVALID_PARAMETERS if the attributes are set.
Let us not set the memory region attributes for MEM_LEND.
Fixes: 82a8daaecfd9 ("firmware: arm_ffa: Add support for MEM_LEND") Reported-by: Joao Alves joao.alves@arm.com Reported-by: Olivier Deprez olivier.deprez@arm.com Link: https://lore.kernel.org/r/20230919-ffa_v1-1_notif-v2-13-6f3a3ca3923c@arm.com Signed-off-by: Sudeep Holla sudeep.holla@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/arm_ffa/driver.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index c37e823590055..21481fc05800f 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -478,6 +478,19 @@ static u32 ffa_get_num_pages_sg(struct scatterlist *sg) return num_pages; }
+static u8 ffa_memory_attributes_get(u32 func_id) +{ + /* + * For the memory lend or donate operation, if the receiver is a PE or + * a proxy endpoint, the owner/sender must not specify the attributes + */ + if (func_id == FFA_FN_NATIVE(MEM_LEND) || + func_id == FFA_MEM_LEND) + return 0; + + return FFA_MEM_NORMAL | FFA_MEM_WRITE_BACK | FFA_MEM_INNER_SHAREABLE; +} + static int ffa_setup_and_transmit(u32 func_id, void *buffer, u32 max_fragsize, struct ffa_mem_ops_args *args) @@ -494,8 +507,7 @@ ffa_setup_and_transmit(u32 func_id, void *buffer, u32 max_fragsize, mem_region->tag = args->tag; mem_region->flags = args->flags; mem_region->sender_id = drv_info->vm_id; - mem_region->attributes = FFA_MEM_NORMAL | FFA_MEM_WRITE_BACK | - FFA_MEM_INNER_SHAREABLE; + mem_region->attributes = ffa_memory_attributes_get(func_id); ep_mem_access = &mem_region->ep_mem_access[0];
for (idx = 0; idx < args->nattrs; idx++, ep_mem_access++) {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wenhua Lin Wenhua.Lin@unisoc.com
[ Upstream commit 26d9e5640d2130ee16df7b1fb6a908f460ab004c ]
The drivers uses a mutex and I2C bus access in its PMIC EIC chip get implementation. This means these functions can sleep and the PMIC EIC chip should set the can_sleep property to true.
This will ensure that a warning is printed when trying to get the value from a context that potentially can't sleep.
Fixes: 348f3cde84ab ("gpio: Add Spreadtrum PMIC EIC driver support") Signed-off-by: Wenhua Lin Wenhua.Lin@unisoc.com Signed-off-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-pmic-eic-sprd.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/gpio/gpio-pmic-eic-sprd.c b/drivers/gpio/gpio-pmic-eic-sprd.c index e518490c4b681..ebbbcb54270d1 100644 --- a/drivers/gpio/gpio-pmic-eic-sprd.c +++ b/drivers/gpio/gpio-pmic-eic-sprd.c @@ -337,6 +337,7 @@ static int sprd_pmic_eic_probe(struct platform_device *pdev) pmic_eic->chip.set_config = sprd_pmic_eic_set_config; pmic_eic->chip.set = sprd_pmic_eic_set; pmic_eic->chip.get = sprd_pmic_eic_get; + pmic_eic->chip.can_sleep = true;
pmic_eic->intc.name = dev_name(&pdev->dev); pmic_eic->intc.irq_mask = sprd_pmic_eic_irq_mask;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: William A. Kennington III william@wkennington.com
[ Upstream commit 92e73d807b68b2214fcafca4e130b5300a9d4b3c ]
Sometimes, our completions race with new master transfers and override the bus->operation and bus->master_or_slave variables. This causes transactions to timeout and kernel crashes less frequently.
To remedy this, we re-order all completions to the very end of the function.
Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: William A. Kennington III william@wkennington.com Reviewed-by: Tali Perry tali.perry1@gmail.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-npcm7xx.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c index 83457359ec450..767dd15b3c881 100644 --- a/drivers/i2c/busses/i2c-npcm7xx.c +++ b/drivers/i2c/busses/i2c-npcm7xx.c @@ -696,6 +696,7 @@ static void npcm_i2c_callback(struct npcm_i2c *bus, { struct i2c_msg *msgs; int msgs_num; + bool do_complete = false;
msgs = bus->msgs; msgs_num = bus->msgs_num; @@ -724,23 +725,17 @@ static void npcm_i2c_callback(struct npcm_i2c *bus, msgs[1].flags & I2C_M_RD) msgs[1].len = info; } - if (completion_done(&bus->cmd_complete) == false) - complete(&bus->cmd_complete); - break; - + do_complete = true; + break; case I2C_NACK_IND: /* MASTER transmit got a NACK before tx all bytes */ bus->cmd_err = -ENXIO; - if (bus->master_or_slave == I2C_MASTER) - complete(&bus->cmd_complete); - + do_complete = true; break; case I2C_BUS_ERR_IND: /* Bus error */ bus->cmd_err = -EAGAIN; - if (bus->master_or_slave == I2C_MASTER) - complete(&bus->cmd_complete); - + do_complete = true; break; case I2C_WAKE_UP_IND: /* I2C wake up */ @@ -754,6 +749,8 @@ static void npcm_i2c_callback(struct npcm_i2c *bus, if (bus->slave) bus->master_or_slave = I2C_SLAVE; #endif + if (do_complete) + complete(&bus->cmd_complete); }
static u8 npcm_i2c_fifo_usage(struct npcm_i2c *bus)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson seanjc@google.com
[ Upstream commit b23c83ad2c638420ec0608a9de354507c41bec29 ]
VMCLEAR active VMCSes before any emergency reboot, not just if the kernel may kexec into a new kernel after a crash. Per Intel's SDM, the VMX architecture doesn't require the CPU to flush the VMCS cache on INIT. If an emergency reboot doesn't RESET CPUs, cached VMCSes could theoretically be kept and only be written back to memory after the new kernel is booted, i.e. could effectively corrupt memory after reboot.
Opportunistically remove the setting of the global pointer to NULL to make checkpatch happy.
Cc: Andrew Cooper Andrew.Cooper3@citrix.com Link: https://lore.kernel.org/r/20230721201859.2307736-2-seanjc@google.com Signed-off-by: Sean Christopherson seanjc@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/asm/kexec.h | 2 -- arch/x86/include/asm/reboot.h | 2 ++ arch/x86/kernel/crash.c | 31 ------------------------------- arch/x86/kernel/reboot.c | 22 ++++++++++++++++++++++ arch/x86/kvm/vmx/vmx.c | 10 +++------- 5 files changed, 27 insertions(+), 40 deletions(-)
diff --git a/arch/x86/include/asm/kexec.h b/arch/x86/include/asm/kexec.h index a3760ca796aa2..256eee99afc8f 100644 --- a/arch/x86/include/asm/kexec.h +++ b/arch/x86/include/asm/kexec.h @@ -208,8 +208,6 @@ int arch_kimage_file_post_load_cleanup(struct kimage *image); #endif #endif
-typedef void crash_vmclear_fn(void); -extern crash_vmclear_fn __rcu *crash_vmclear_loaded_vmcss; extern void kdump_nmi_shootdown_cpus(void);
#endif /* __ASSEMBLY__ */ diff --git a/arch/x86/include/asm/reboot.h b/arch/x86/include/asm/reboot.h index bc5b4d788c08d..2551baec927d2 100644 --- a/arch/x86/include/asm/reboot.h +++ b/arch/x86/include/asm/reboot.h @@ -25,6 +25,8 @@ void __noreturn machine_real_restart(unsigned int type); #define MRR_BIOS 0 #define MRR_APM 1
+typedef void crash_vmclear_fn(void); +extern crash_vmclear_fn __rcu *crash_vmclear_loaded_vmcss; void cpu_emergency_disable_virtualization(void);
typedef void (*nmi_shootdown_cb)(int, struct pt_regs*); diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c index cdd92ab43cda4..54cd959cb3160 100644 --- a/arch/x86/kernel/crash.c +++ b/arch/x86/kernel/crash.c @@ -48,38 +48,12 @@ struct crash_memmap_data { unsigned int type; };
-/* - * This is used to VMCLEAR all VMCSs loaded on the - * processor. And when loading kvm_intel module, the - * callback function pointer will be assigned. - * - * protected by rcu. - */ -crash_vmclear_fn __rcu *crash_vmclear_loaded_vmcss = NULL; -EXPORT_SYMBOL_GPL(crash_vmclear_loaded_vmcss); - -static inline void cpu_crash_vmclear_loaded_vmcss(void) -{ - crash_vmclear_fn *do_vmclear_operation = NULL; - - rcu_read_lock(); - do_vmclear_operation = rcu_dereference(crash_vmclear_loaded_vmcss); - if (do_vmclear_operation) - do_vmclear_operation(); - rcu_read_unlock(); -} - #if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
static void kdump_nmi_callback(int cpu, struct pt_regs *regs) { crash_save_cpu(regs, cpu);
- /* - * VMCLEAR VMCSs loaded on all cpus if needed. - */ - cpu_crash_vmclear_loaded_vmcss(); - /* * Disable Intel PT to stop its logging */ @@ -133,11 +107,6 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
crash_smp_send_stop();
- /* - * VMCLEAR VMCSs loaded on this cpu if needed. - */ - cpu_crash_vmclear_loaded_vmcss(); - cpu_emergency_disable_virtualization();
/* diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index d03c551defccf..299b970e5f829 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -787,6 +787,26 @@ void machine_crash_shutdown(struct pt_regs *regs) } #endif
+/* + * This is used to VMCLEAR all VMCSs loaded on the + * processor. And when loading kvm_intel module, the + * callback function pointer will be assigned. + * + * protected by rcu. + */ +crash_vmclear_fn __rcu *crash_vmclear_loaded_vmcss; +EXPORT_SYMBOL_GPL(crash_vmclear_loaded_vmcss); + +static inline void cpu_crash_vmclear_loaded_vmcss(void) +{ + crash_vmclear_fn *do_vmclear_operation = NULL; + + rcu_read_lock(); + do_vmclear_operation = rcu_dereference(crash_vmclear_loaded_vmcss); + if (do_vmclear_operation) + do_vmclear_operation(); + rcu_read_unlock(); +}
/* This is the CPU performing the emergency shutdown work. */ int crashing_cpu = -1; @@ -798,6 +818,8 @@ int crashing_cpu = -1; */ void cpu_emergency_disable_virtualization(void) { + cpu_crash_vmclear_loaded_vmcss(); + cpu_emergency_vmxoff(); cpu_emergency_svm_disable(); } diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 4e972b9b68e59..31a10d774df6d 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -40,7 +40,7 @@ #include <asm/idtentry.h> #include <asm/io.h> #include <asm/irq_remapping.h> -#include <asm/kexec.h> +#include <asm/reboot.h> #include <asm/perf_event.h> #include <asm/mmu_context.h> #include <asm/mshyperv.h> @@ -702,7 +702,6 @@ static int vmx_set_guest_uret_msr(struct vcpu_vmx *vmx, return ret; }
-#ifdef CONFIG_KEXEC_CORE static void crash_vmclear_local_loaded_vmcss(void) { int cpu = raw_smp_processor_id(); @@ -712,7 +711,6 @@ static void crash_vmclear_local_loaded_vmcss(void) loaded_vmcss_on_cpu_link) vmcs_clear(v->vmcs); } -#endif /* CONFIG_KEXEC_CORE */
static void __loaded_vmcs_clear(void *arg) { @@ -8522,10 +8520,9 @@ static void __vmx_exit(void) { allow_smaller_maxphyaddr = false;
-#ifdef CONFIG_KEXEC_CORE RCU_INIT_POINTER(crash_vmclear_loaded_vmcss, NULL); synchronize_rcu(); -#endif + vmx_cleanup_l1d_flush(); }
@@ -8598,10 +8595,9 @@ static int __init vmx_init(void) pi_init_cpu(cpu); }
-#ifdef CONFIG_KEXEC_CORE rcu_assign_pointer(crash_vmclear_loaded_vmcss, crash_vmclear_local_loaded_vmcss); -#endif + vmx_check_vmcs12_offsets();
/*
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiubo Li xiubli@redhat.com
[ Upstream commit e3dfcab2080dc1f9a4b09cc1327361bc2845bfcd ]
When unmounting all the dirty buffers will be flushed and after the last osd request is finished the last reference of the i_count will be released. Then it will flush the dirty cap/snap to MDSs, and the unmounting won't wait the possible acks, which will ihold the inodes when updating the metadata locally but makes no sense any more, of this. This will make the evict_inodes() to skip these inodes.
If encrypt is enabled the kernel generate a warning when removing the encrypt keys when the skipped inodes still hold the keyring:
WARNING: CPU: 4 PID: 168846 at fs/crypto/keyring.c:242 fscrypt_destroy_keyring+0x7e/0xd0 CPU: 4 PID: 168846 Comm: umount Tainted: G S 6.1.0-rc5-ceph-g72ead199864c #1 Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0 12/17/2015 RIP: 0010:fscrypt_destroy_keyring+0x7e/0xd0 RSP: 0018:ffffc9000b277e28 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff88810d52ac00 RCX: ffff88810b56aa00 RDX: 0000000080000000 RSI: ffffffff822f3a09 RDI: ffff888108f59000 RBP: ffff8881d394fb88 R08: 0000000000000028 R09: 0000000000000000 R10: 0000000000000001 R11: 11ff4fe6834fcd91 R12: ffff8881d394fc40 R13: ffff888108f59000 R14: ffff8881d394f800 R15: 0000000000000000 FS: 00007fd83f6f1080(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f918d417000 CR3: 000000017f89a005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> generic_shutdown_super+0x47/0x120 kill_anon_super+0x14/0x30 ceph_kill_sb+0x36/0x90 [ceph] deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x67/0xb0 exit_to_user_mode_prepare+0x23d/0x240 syscall_exit_to_user_mode+0x25/0x60 do_syscall_64+0x40/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fd83dc39e9b
Later the kernel will crash when iput() the inodes and dereferencing the "sb->s_master_keys", which has been released by the generic_shutdown_super().
Link: https://tracker.ceph.com/issues/59162 Signed-off-by: Xiubo Li xiubli@redhat.com Reviewed-and-tested-by: Luís Henriques lhenriques@suse.de Reviewed-by: Milind Changire mchangir@redhat.com Signed-off-by: Ilya Dryomov idryomov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ceph/caps.c | 6 +++- fs/ceph/mds_client.c | 12 +++++-- fs/ceph/mds_client.h | 11 +++++-- fs/ceph/quota.c | 14 ++++----- fs/ceph/snap.c | 10 +++--- fs/ceph/super.c | 75 +++++++++++++++++++++++++++++++++++++++++--- fs/ceph/super.h | 3 ++ 7 files changed, 109 insertions(+), 22 deletions(-)
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index 4a9ad5ff726d4..36052a3626830 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -4100,6 +4100,9 @@ void ceph_handle_caps(struct ceph_mds_session *session,
dout("handle_caps from mds%d\n", session->s_mds);
+ if (!ceph_inc_mds_stopping_blocker(mdsc, session)) + return; + /* decode */ end = msg->front.iov_base + msg->front.iov_len; if (msg->front.iov_len < sizeof(*h)) @@ -4196,7 +4199,6 @@ void ceph_handle_caps(struct ceph_mds_session *session, vino.snap, inode);
mutex_lock(&session->s_mutex); - inc_session_sequence(session); dout(" mds%d seq %lld cap seq %u\n", session->s_mds, session->s_seq, (unsigned)seq);
@@ -4299,6 +4301,8 @@ void ceph_handle_caps(struct ceph_mds_session *session, done_unlocked: iput(inode); out: + ceph_dec_mds_stopping_blocker(mdsc); + ceph_put_string(extra_info.pool_ns);
/* Defer closing the sessions after s_mutex lock being released */ diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 5399a9ea5b4f1..f6a7fd47efd7a 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -4546,6 +4546,9 @@ static void handle_lease(struct ceph_mds_client *mdsc,
dout("handle_lease from mds%d\n", mds);
+ if (!ceph_inc_mds_stopping_blocker(mdsc, session)) + return; + /* decode */ if (msg->front.iov_len < sizeof(*h) + sizeof(u32)) goto bad; @@ -4564,8 +4567,6 @@ static void handle_lease(struct ceph_mds_client *mdsc, dname.len, dname.name);
mutex_lock(&session->s_mutex); - inc_session_sequence(session); - if (!inode) { dout("handle_lease no inode %llx\n", vino.ino); goto release; @@ -4627,9 +4628,13 @@ static void handle_lease(struct ceph_mds_client *mdsc, out: mutex_unlock(&session->s_mutex); iput(inode); + + ceph_dec_mds_stopping_blocker(mdsc); return;
bad: + ceph_dec_mds_stopping_blocker(mdsc); + pr_err("corrupt lease message\n"); ceph_msg_dump(msg); } @@ -4825,6 +4830,9 @@ int ceph_mdsc_init(struct ceph_fs_client *fsc) }
init_completion(&mdsc->safe_umount_waiters); + spin_lock_init(&mdsc->stopping_lock); + atomic_set(&mdsc->stopping_blockers, 0); + init_completion(&mdsc->stopping_waiter); init_waitqueue_head(&mdsc->session_close_wq); INIT_LIST_HEAD(&mdsc->waiting_for_map); mdsc->quotarealms_inodes = RB_ROOT; diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h index 9a80658f41679..0913959ccfa64 100644 --- a/fs/ceph/mds_client.h +++ b/fs/ceph/mds_client.h @@ -381,8 +381,9 @@ struct cap_wait { };
enum { - CEPH_MDSC_STOPPING_BEGIN = 1, - CEPH_MDSC_STOPPING_FLUSHED = 2, + CEPH_MDSC_STOPPING_BEGIN = 1, + CEPH_MDSC_STOPPING_FLUSHING = 2, + CEPH_MDSC_STOPPING_FLUSHED = 3, };
/* @@ -401,7 +402,11 @@ struct ceph_mds_client { struct ceph_mds_session **sessions; /* NULL for mds if no session */ atomic_t num_sessions; int max_sessions; /* len of sessions array */ - int stopping; /* true if shutting down */ + + spinlock_t stopping_lock; /* protect snap_empty */ + int stopping; /* the stage of shutting down */ + atomic_t stopping_blockers; + struct completion stopping_waiter;
atomic64_t quotarealms_count; /* # realms with quota */ /* diff --git a/fs/ceph/quota.c b/fs/ceph/quota.c index 64592adfe48fb..f7fcf7f08ec64 100644 --- a/fs/ceph/quota.c +++ b/fs/ceph/quota.c @@ -47,25 +47,23 @@ void ceph_handle_quota(struct ceph_mds_client *mdsc, struct inode *inode; struct ceph_inode_info *ci;
+ if (!ceph_inc_mds_stopping_blocker(mdsc, session)) + return; + if (msg->front.iov_len < sizeof(*h)) { pr_err("%s corrupt message mds%d len %d\n", __func__, session->s_mds, (int)msg->front.iov_len); ceph_msg_dump(msg); - return; + goto out; }
- /* increment msg sequence number */ - mutex_lock(&session->s_mutex); - inc_session_sequence(session); - mutex_unlock(&session->s_mutex); - /* lookup inode */ vino.ino = le64_to_cpu(h->ino); vino.snap = CEPH_NOSNAP; inode = ceph_find_inode(sb, vino); if (!inode) { pr_warn("Failed to find inode %llu\n", vino.ino); - return; + goto out; } ci = ceph_inode(inode);
@@ -78,6 +76,8 @@ void ceph_handle_quota(struct ceph_mds_client *mdsc, spin_unlock(&ci->i_ceph_lock);
iput(inode); +out: + ceph_dec_mds_stopping_blocker(mdsc); }
static struct ceph_quotarealm_inode * diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c index 2e73ba62bd7aa..82f7592e1747b 100644 --- a/fs/ceph/snap.c +++ b/fs/ceph/snap.c @@ -1012,6 +1012,9 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc, int locked_rwsem = 0; bool close_sessions = false;
+ if (!ceph_inc_mds_stopping_blocker(mdsc, session)) + return; + /* decode */ if (msg->front.iov_len < sizeof(*h)) goto bad; @@ -1027,10 +1030,6 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc, dout("%s from mds%d op %s split %llx tracelen %d\n", __func__, mds, ceph_snap_op_name(op), split, trace_len);
- mutex_lock(&session->s_mutex); - inc_session_sequence(session); - mutex_unlock(&session->s_mutex); - down_write(&mdsc->snap_rwsem); locked_rwsem = 1;
@@ -1148,6 +1147,7 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc, up_write(&mdsc->snap_rwsem);
flush_snaps(mdsc); + ceph_dec_mds_stopping_blocker(mdsc); return;
bad: @@ -1157,6 +1157,8 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc, if (locked_rwsem) up_write(&mdsc->snap_rwsem);
+ ceph_dec_mds_stopping_blocker(mdsc); + if (close_sessions) ceph_mdsc_close_sessions(mdsc); return; diff --git a/fs/ceph/super.c b/fs/ceph/super.c index a5f52013314d6..281b493fdac8e 100644 --- a/fs/ceph/super.c +++ b/fs/ceph/super.c @@ -1365,25 +1365,90 @@ static int ceph_init_fs_context(struct fs_context *fc) return -ENOMEM; }
+/* + * Return true if it successfully increases the blocker counter, + * or false if the mdsc is in stopping and flushed state. + */ +static bool __inc_stopping_blocker(struct ceph_mds_client *mdsc) +{ + spin_lock(&mdsc->stopping_lock); + if (mdsc->stopping >= CEPH_MDSC_STOPPING_FLUSHING) { + spin_unlock(&mdsc->stopping_lock); + return false; + } + atomic_inc(&mdsc->stopping_blockers); + spin_unlock(&mdsc->stopping_lock); + return true; +} + +static void __dec_stopping_blocker(struct ceph_mds_client *mdsc) +{ + spin_lock(&mdsc->stopping_lock); + if (!atomic_dec_return(&mdsc->stopping_blockers) && + mdsc->stopping >= CEPH_MDSC_STOPPING_FLUSHING) + complete_all(&mdsc->stopping_waiter); + spin_unlock(&mdsc->stopping_lock); +} + +/* For metadata IO requests */ +bool ceph_inc_mds_stopping_blocker(struct ceph_mds_client *mdsc, + struct ceph_mds_session *session) +{ + mutex_lock(&session->s_mutex); + inc_session_sequence(session); + mutex_unlock(&session->s_mutex); + + return __inc_stopping_blocker(mdsc); +} + +void ceph_dec_mds_stopping_blocker(struct ceph_mds_client *mdsc) +{ + __dec_stopping_blocker(mdsc); +} + static void ceph_kill_sb(struct super_block *s) { struct ceph_fs_client *fsc = ceph_sb_to_client(s); + struct ceph_mds_client *mdsc = fsc->mdsc; + bool wait;
dout("kill_sb %p\n", s);
- ceph_mdsc_pre_umount(fsc->mdsc); + ceph_mdsc_pre_umount(mdsc); flush_fs_workqueues(fsc);
/* * Though the kill_anon_super() will finally trigger the - * sync_filesystem() anyway, we still need to do it here - * and then bump the stage of shutdown to stop the work - * queue as earlier as possible. + * sync_filesystem() anyway, we still need to do it here and + * then bump the stage of shutdown. This will allow us to + * drop any further message, which will increase the inodes' + * i_count reference counters but makes no sense any more, + * from MDSs. + * + * Without this when evicting the inodes it may fail in the + * kill_anon_super(), which will trigger a warning when + * destroying the fscrypt keyring and then possibly trigger + * a further crash in ceph module when the iput() tries to + * evict the inodes later. */ sync_filesystem(s);
- fsc->mdsc->stopping = CEPH_MDSC_STOPPING_FLUSHED; + spin_lock(&mdsc->stopping_lock); + mdsc->stopping = CEPH_MDSC_STOPPING_FLUSHING; + wait = !!atomic_read(&mdsc->stopping_blockers); + spin_unlock(&mdsc->stopping_lock); + + if (wait && atomic_read(&mdsc->stopping_blockers)) { + long timeleft = wait_for_completion_killable_timeout( + &mdsc->stopping_waiter, + fsc->client->options->mount_timeout); + if (!timeleft) /* timed out */ + pr_warn("umount timed out, %ld\n", timeleft); + else if (timeleft < 0) /* killed */ + pr_warn("umount was killed, %ld\n", timeleft); + }
+ mdsc->stopping = CEPH_MDSC_STOPPING_FLUSHED; kill_anon_super(s);
fsc->client->extra_mon_dispatch = NULL; diff --git a/fs/ceph/super.h b/fs/ceph/super.h index 562f42f4a77d7..7ca74f5f70be5 100644 --- a/fs/ceph/super.h +++ b/fs/ceph/super.h @@ -1374,4 +1374,7 @@ extern bool ceph_quota_update_statfs(struct ceph_fs_client *fsc, struct kstatfs *buf); extern void ceph_cleanup_quotarealms_inodes(struct ceph_mds_client *mdsc);
+bool ceph_inc_mds_stopping_blocker(struct ceph_mds_client *mdsc, + struct ceph_mds_session *session); +void ceph_dec_mds_stopping_blocker(struct ceph_mds_client *mdsc); #endif /* _FS_CEPH_SUPER_H */
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sergey Senozhatsky senozhatsky@chromium.org
[ Upstream commit fb5a4315591dae307a65fc246ca80b5159d296e1 ]
__dma_entry_alloc_check_leak() calls into printk -> serial console output (qcom geni) and grabs port->lock under free_entries_lock spin lock, which is a reverse locking dependency chain as qcom_geni IRQ handler can call into dma-debug code and grab free_entries_lock under port->lock.
Move __dma_entry_alloc_check_leak() call out of free_entries_lock scope so that we don't acquire serial console's port->lock under it.
Trimmed-down lockdep splat:
The existing dependency chain (in reverse order) is:
-> #2 (free_entries_lock){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 dma_entry_alloc+0x38/0x110 debug_dma_map_page+0x60/0xf8 dma_map_page_attrs+0x1e0/0x230 dma_map_single_attrs.constprop.0+0x6c/0xc8 geni_se_rx_dma_prep+0x40/0xcc qcom_geni_serial_isr+0x310/0x510 __handle_irq_event_percpu+0x110/0x244 handle_irq_event_percpu+0x20/0x54 handle_irq_event+0x50/0x88 handle_fasteoi_irq+0xa4/0xcc handle_irq_desc+0x28/0x40 generic_handle_domain_irq+0x24/0x30 gic_handle_irq+0xc4/0x148 do_interrupt_handler+0xa4/0xb0 el1_interrupt+0x34/0x64 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x64/0x68 arch_local_irq_enable+0x4/0x8 ____do_softirq+0x18/0x24 ...
-> #1 (&port_lock_key){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 qcom_geni_serial_console_write+0x184/0x1dc console_flush_all+0x344/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 register_console+0x230/0x38c uart_add_one_port+0x338/0x494 qcom_geni_serial_probe+0x390/0x424 platform_probe+0x70/0xc0 really_probe+0x148/0x280 __driver_probe_device+0xfc/0x114 driver_probe_device+0x44/0x100 __device_attach_driver+0x64/0xdc bus_for_each_drv+0xb0/0xd8 __device_attach+0xe4/0x140 device_initial_probe+0x1c/0x28 bus_probe_device+0x44/0xb0 device_add+0x538/0x668 of_device_add+0x44/0x50 of_platform_device_create_pdata+0x94/0xc8 of_platform_bus_create+0x270/0x304 of_platform_populate+0xac/0xc4 devm_of_platform_populate+0x60/0xac geni_se_probe+0x154/0x160 platform_probe+0x70/0xc0 ...
-> #0 (console_owner){-...}-{0:0}: __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 dma_entry_alloc+0xb4/0x110 debug_dma_map_sg+0xdc/0x2f8 __dma_map_sg_attrs+0xac/0xe4 dma_map_sgtable+0x30/0x4c get_pages+0x1d4/0x1e4 [msm] msm_gem_pin_pages_locked+0x38/0xac [msm] msm_gem_pin_vma_locked+0x58/0x88 [msm] msm_ioctl_gem_submit+0xde4/0x13ac [msm] drm_ioctl_kernel+0xe0/0x15c drm_ioctl+0x2e8/0x3f4 vfs_ioctl+0x30/0x50 ...
Chain exists of: console_owner --> &port_lock_key --> free_entries_lock
Possible unsafe locking scenario:
CPU0 CPU1 ---- ---- lock(free_entries_lock); lock(&port_lock_key); lock(free_entries_lock); lock(console_owner);
*** DEADLOCK ***
Call trace: dump_backtrace+0xb4/0xf0 show_stack+0x20/0x30 dump_stack_lvl+0x60/0x84 dump_stack+0x18/0x24 print_circular_bug+0x1cc/0x234 check_noncircular+0x78/0xac __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 dma_entry_alloc+0xb4/0x110 debug_dma_map_sg+0xdc/0x2f8 __dma_map_sg_attrs+0xac/0xe4 dma_map_sgtable+0x30/0x4c get_pages+0x1d4/0x1e4 [msm] msm_gem_pin_pages_locked+0x38/0xac [msm] msm_gem_pin_vma_locked+0x58/0x88 [msm] msm_ioctl_gem_submit+0xde4/0x13ac [msm] drm_ioctl_kernel+0xe0/0x15c drm_ioctl+0x2e8/0x3f4 vfs_ioctl+0x30/0x50 ...
Reported-by: Rob Clark robdclark@chromium.org Signed-off-by: Sergey Senozhatsky senozhatsky@chromium.org Acked-by: Robin Murphy robin.murphy@arm.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/dma/debug.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c index 18c93c2276cae..3ff7089d11a92 100644 --- a/kernel/dma/debug.c +++ b/kernel/dma/debug.c @@ -603,15 +603,19 @@ static struct dma_debug_entry *__dma_entry_alloc(void) return entry; }
-static void __dma_entry_alloc_check_leak(void) +/* + * This should be called outside of free_entries_lock scope to avoid potential + * deadlocks with serial consoles that use DMA. + */ +static void __dma_entry_alloc_check_leak(u32 nr_entries) { - u32 tmp = nr_total_entries % nr_prealloc_entries; + u32 tmp = nr_entries % nr_prealloc_entries;
/* Shout each time we tick over some multiple of the initial pool */ if (tmp < DMA_DEBUG_DYNAMIC_ENTRIES) { pr_info("dma_debug_entry pool grown to %u (%u00%%)\n", - nr_total_entries, - (nr_total_entries / nr_prealloc_entries)); + nr_entries, + (nr_entries / nr_prealloc_entries)); } }
@@ -622,8 +626,10 @@ static void __dma_entry_alloc_check_leak(void) */ static struct dma_debug_entry *dma_entry_alloc(void) { + bool alloc_check_leak = false; struct dma_debug_entry *entry; unsigned long flags; + u32 nr_entries;
spin_lock_irqsave(&free_entries_lock, flags); if (num_free_entries == 0) { @@ -633,13 +639,17 @@ static struct dma_debug_entry *dma_entry_alloc(void) pr_err("debugging out of memory - disabling\n"); return NULL; } - __dma_entry_alloc_check_leak(); + alloc_check_leak = true; + nr_entries = nr_total_entries; }
entry = __dma_entry_alloc();
spin_unlock_irqrestore(&free_entries_lock, flags);
+ if (alloc_check_leak) + __dma_entry_alloc_check_leak(nr_entries); + #ifdef CONFIG_STACKTRACE entry->stack_len = stack_trace_save(entry->stack_entries, ARRAY_SIZE(entry->stack_entries),
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann daniel@iogearbox.net
[ Upstream commit 6a86b5b5cd76d2734304a0173f5f01aa8aa2025e ]
syzbot reported a data race splat between two processes trying to update the same BPF map value via syscall on different CPUs:
BUG: KCSAN: data-race in bpf_percpu_array_update / bpf_percpu_array_update
write to 0xffffe8fffe7425d8 of 8 bytes by task 8257 on cpu 1: bpf_long_memcpy include/linux/bpf.h:428 [inline] bpf_obj_memcpy include/linux/bpf.h:441 [inline] copy_map_value_long include/linux/bpf.h:464 [inline] bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380 bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175 generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749 bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648 __sys_bpf+0x28a/0x780 __do_sys_bpf kernel/bpf/syscall.c:5241 [inline] __se_sys_bpf kernel/bpf/syscall.c:5239 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd
write to 0xffffe8fffe7425d8 of 8 bytes by task 8268 on cpu 0: bpf_long_memcpy include/linux/bpf.h:428 [inline] bpf_obj_memcpy include/linux/bpf.h:441 [inline] copy_map_value_long include/linux/bpf.h:464 [inline] bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380 bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175 generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749 bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648 __sys_bpf+0x28a/0x780 __do_sys_bpf kernel/bpf/syscall.c:5241 [inline] __se_sys_bpf kernel/bpf/syscall.c:5239 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000000000 -> 0xfffffff000002788
The bpf_long_memcpy is used with 8-byte aligned pointers, power-of-8 size and forced to use long read/writes to try to atomically copy long counters. It is best-effort only and no barriers are here since it _will_ race with concurrent updates from BPF programs. The bpf_long_memcpy() is called from bpf(2) syscall. Marco suggested that the best way to make this known to KCSAN would be to use data_race() annotation.
Reported-by: syzbot+97522333291430dd277f@syzkaller.appspotmail.com Suggested-by: Marco Elver elver@google.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Acked-by: Marco Elver elver@google.com Link: https://lore.kernel.org/bpf/000000000000d87a7f06040c970c@google.com Link: https://lore.kernel.org/bpf/57628f7a15e20d502247c3b55fceb1cb2b31f266.1693342... Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/bpf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/bpf.h b/include/linux/bpf.h index b3d3aa8437dce..1ed2ec035e779 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -301,7 +301,7 @@ static inline void bpf_long_memcpy(void *dst, const void *src, u32 size)
size /= sizeof(long); while (size--) - *ldst++ = *lsrc++; + data_race(*ldst++ = *lsrc++); }
/* copy everything but bpf_spin_lock, bpf_timer, and kptrs. There could be one of each. */
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tobias Schramm t.schramm@manjaro.org
[ Upstream commit 171f8a49f212e87a8b04087568e1b3d132e36a18 ]
Through empirical testing it has been determined that sometimes RX SPI transfers with DMA enabled return corrupted data. This is down to single or even multiple bytes lost during DMA transfer from SPI peripheral to memory. It seems the RX FIFO within the SPI peripheral can become confused when performing bus read accesses wider than a single byte to it during an active SPI transfer.
This patch reduces the width of individual DMA read accesses to the RX FIFO to a single byte to mitigate that issue.
Signed-off-by: Tobias Schramm t.schramm@manjaro.org Link: https://lore.kernel.org/r/20230827152558.5368-2-t.schramm@manjaro.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-sun6i.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index 23ad052528dbe..2bfe87873edb3 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -200,7 +200,7 @@ static int sun6i_spi_prepare_dma(struct sun6i_spi *sspi, struct dma_slave_config rxconf = { .direction = DMA_DEV_TO_MEM, .src_addr = sspi->dma_addr_rx, - .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .src_maxburst = 8, };
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tobias Schramm t.schramm@manjaro.org
[ Upstream commit 1f11f4202caf5710204d334fe63392052783876d ]
Previously the transfer complete IRQ immediately drained to RX FIFO to read any data remaining in FIFO to the RX buffer. This behaviour is correct when dealing with SPI in interrupt mode. However in DMA mode the transfer complete interrupt still fires as soon as all bytes to be transferred have been stored in the FIFO. At that point data in the FIFO still needs to be picked up by the DMA engine. Thus the drain procedure and DMA engine end up racing to read from RX FIFO, corrupting any data read. Additionally the RX buffer pointer is never adjusted according to DMA progress in DMA mode, thus calling the RX FIFO drain procedure in DMA mode is a bug. Fix corruptions in DMA RX mode by draining RX FIFO only in interrupt mode. Also wait for completion of RX DMA when in DMA mode before returning to ensure all data has been copied to the supplied memory buffer.
Signed-off-by: Tobias Schramm t.schramm@manjaro.org Link: https://lore.kernel.org/r/20230827152558.5368-3-t.schramm@manjaro.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-sun6i.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index 2bfe87873edb3..d79853ba7792a 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -95,6 +95,7 @@ struct sun6i_spi { struct reset_control *rstc;
struct completion done; + struct completion dma_rx_done;
const u8 *tx_buf; u8 *rx_buf; @@ -189,6 +190,13 @@ static size_t sun6i_spi_max_transfer_size(struct spi_device *spi) return SUN6I_MAX_XFER_SIZE - 1; }
+static void sun6i_spi_dma_rx_cb(void *param) +{ + struct sun6i_spi *sspi = param; + + complete(&sspi->dma_rx_done); +} + static int sun6i_spi_prepare_dma(struct sun6i_spi *sspi, struct spi_transfer *tfr) { @@ -213,6 +221,8 @@ static int sun6i_spi_prepare_dma(struct sun6i_spi *sspi, DMA_PREP_INTERRUPT); if (!rxdesc) return -EINVAL; + rxdesc->callback_param = sspi; + rxdesc->callback = sun6i_spi_dma_rx_cb; }
txdesc = NULL; @@ -268,6 +278,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master, return -EINVAL;
reinit_completion(&sspi->done); + reinit_completion(&sspi->dma_rx_done); sspi->tx_buf = tfr->tx_buf; sspi->rx_buf = tfr->rx_buf; sspi->len = tfr->len; @@ -426,6 +437,22 @@ static int sun6i_spi_transfer_one(struct spi_master *master, start = jiffies; timeout = wait_for_completion_timeout(&sspi->done, msecs_to_jiffies(tx_time)); + + if (!use_dma) { + sun6i_spi_drain_fifo(sspi); + } else { + if (timeout && rx_len) { + /* + * Even though RX on the peripheral side has finished + * RX DMA might still be in flight + */ + timeout = wait_for_completion_timeout(&sspi->dma_rx_done, + timeout); + if (!timeout) + dev_warn(&master->dev, "RX DMA timeout\n"); + } + } + end = jiffies; if (!timeout) { dev_warn(&master->dev, @@ -453,7 +480,6 @@ static irqreturn_t sun6i_spi_handler(int irq, void *dev_id) /* Transfer complete */ if (status & SUN6I_INT_CTL_TC) { sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TC); - sun6i_spi_drain_fifo(sspi); complete(&sspi->done); return IRQ_HANDLED; } @@ -611,6 +637,7 @@ static int sun6i_spi_probe(struct platform_device *pdev) }
init_completion(&sspi->done); + init_completion(&sspi->dma_rx_done);
sspi->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); if (IS_ERR(sspi->rstc)) {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nigel Kirkland nkirkland2304@gmail.com
[ Upstream commit 8ae5b3a685dc59a8cf7ccfe0e850999ba9727a3c ]
The nvme_fc_fcp_op structure describing an AEN operation is initialized with a null request structure pointer. An FC LLDD may make a call to nvme_fc_io_getuuid passing a pointer to an nvmefc_fcp_req for an AEN operation.
Add validation of the request structure pointer before dereference.
Signed-off-by: Nigel Kirkland nkirkland2304@gmail.com Reviewed-by: James Smart jsmart2021@gmail.com Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/fc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 6c3d469eed7e3..177a365b8ec55 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -1911,7 +1911,7 @@ char *nvme_fc_io_getuuid(struct nvmefc_fcp_req *req) struct nvme_fc_fcp_op *op = fcp_req_to_fcp_op(req); struct request *rq = op->rq;
- if (!IS_ENABLED(CONFIG_BLK_CGROUP_FC_APPID) || !rq->bio) + if (!IS_ENABLED(CONFIG_BLK_CGROUP_FC_APPID) || !rq || !rq->bio) return NULL; return blkcg_get_fc_appid(rq->bio); }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller deller@gmx.de
[ Upstream commit eb3255ee8f6f4691471a28fbf22db5e8901116cd ]
Fix this makecheck warning: drivers/parisc/sba_iommu.c:98:19: warning: symbol 'sba_list' was not declared. Should it be static?
Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/parisc/include/asm/ropes.h | 3 +++ drivers/char/agp/parisc-agp.c | 2 -- 2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/parisc/include/asm/ropes.h b/arch/parisc/include/asm/ropes.h index 8e51c775c80a6..62399c7ea94a1 100644 --- a/arch/parisc/include/asm/ropes.h +++ b/arch/parisc/include/asm/ropes.h @@ -86,6 +86,9 @@ struct sba_device { struct ioc ioc[MAX_IOC]; };
+/* list of SBA's in system, see drivers/parisc/sba_iommu.c */ +extern struct sba_device *sba_list; + #define ASTRO_RUNWAY_PORT 0x582 #define IKE_MERCED_PORT 0x803 #define REO_MERCED_PORT 0x804 diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c index 514f9f287a781..c6f181702b9a7 100644 --- a/drivers/char/agp/parisc-agp.c +++ b/drivers/char/agp/parisc-agp.c @@ -394,8 +394,6 @@ find_quicksilver(struct device *dev, void *data) static int __init parisc_agp_init(void) { - extern struct sba_device *sba_list; - int err = -1; struct parisc_device *sba = NULL, *lba = NULL; struct lba_device *lbadev = NULL;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller deller@gmx.de
[ Upstream commit 927c6c8aa27c284a799b8c18784e37d3373af908 ]
Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/parisc/iosapic.c | 4 ++-- drivers/parisc/iosapic_private.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index bcc1dae007803..890c3c0f3d140 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -202,9 +202,9 @@ static inline void iosapic_write(void __iomem *iosapic, unsigned int reg, u32 va
static DEFINE_SPINLOCK(iosapic_lock);
-static inline void iosapic_eoi(void __iomem *addr, unsigned int data) +static inline void iosapic_eoi(__le32 __iomem *addr, __le32 data) { - __raw_writel(data, addr); + __raw_writel((__force u32)data, addr); }
/* diff --git a/drivers/parisc/iosapic_private.h b/drivers/parisc/iosapic_private.h index 73ecc657ad954..bd8ff40162b4b 100644 --- a/drivers/parisc/iosapic_private.h +++ b/drivers/parisc/iosapic_private.h @@ -118,8 +118,8 @@ struct iosapic_irt { struct vector_info { struct iosapic_info *iosapic; /* I/O SAPIC this vector is on */ struct irt_entry *irte; /* IRT entry */ - u32 __iomem *eoi_addr; /* precalculate EOI reg address */ - u32 eoi_data; /* IA64: ? PA: swapped txn_data */ + __le32 __iomem *eoi_addr; /* precalculate EOI reg address */ + __le32 eoi_data; /* IA64: ? PA: swapped txn_data */ int txn_irq; /* virtual IRQ number for processor */ ulong txn_addr; /* IA64: id_eid PA: partial HPA */ u32 txn_data; /* CPU interrupt bit */
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller deller@gmx.de
[ Upstream commit b137b9d60b8add5620a06c687a71ce18776730b0 ]
Fix "warning: directive in macro's argument list" warning.
Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/parisc/kernel/drivers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index e7ee0c0c91d35..8f12b9f318ae6 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -924,9 +924,9 @@ static __init void qemu_header(void) pr_info("#define PARISC_MODEL "%s"\n\n", boot_cpu_data.pdc.sys_model_name);
+ #define p ((unsigned long *)&boot_cpu_data.pdc.model) pr_info("#define PARISC_PDC_MODEL 0x%lx, 0x%lx, 0x%lx, " "0x%lx, 0x%lx, 0x%lx, 0x%lx, 0x%lx, 0x%lx\n\n", - #define p ((unsigned long *)&boot_cpu_data.pdc.model) p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7], p[8]); #undef p
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller deller@gmx.de
[ Upstream commit b1bef1388c427cdad7331a9c8eb4ebbbe5b954b0 ]
Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/parisc/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index b05055f3ba4b8..9ddb2e3970589 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -368,7 +368,7 @@ union irq_stack_union { volatile unsigned int lock[1]; };
-DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = { +static DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = { .slock = { 1,1,1,1 }, }; #endif
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javed Hasan jhasan@marvell.com
[ Upstream commit 7df0b2605489bef3f4223ad66f1f9bb8d50d4cd2 ]
Avoid race condition between I/O completion and abort processing by protecting the cmd_type with the rport lock.
Signed-off-by: Javed Hasan jhasan@marvell.com Signed-off-by: Saurav Kashyap skashyap@marvell.com Link: https://lore.kernel.org/r/20230901060646.27885-1-skashyap@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qedf/qedf_io.c | 10 ++++++++-- drivers/scsi/qedf/qedf_main.c | 7 ++++++- 2 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/qedf/qedf_io.c b/drivers/scsi/qedf/qedf_io.c index 4750ec5789a80..10fe3383855c0 100644 --- a/drivers/scsi/qedf/qedf_io.c +++ b/drivers/scsi/qedf/qedf_io.c @@ -1904,6 +1904,7 @@ int qedf_initiate_abts(struct qedf_ioreq *io_req, bool return_scsi_cmd_on_abts) goto drop_rdata_kref; }
+ spin_lock_irqsave(&fcport->rport_lock, flags); if (!test_bit(QEDF_CMD_OUTSTANDING, &io_req->flags) || test_bit(QEDF_CMD_IN_CLEANUP, &io_req->flags) || test_bit(QEDF_CMD_IN_ABORT, &io_req->flags)) { @@ -1911,17 +1912,20 @@ int qedf_initiate_abts(struct qedf_ioreq *io_req, bool return_scsi_cmd_on_abts) "io_req xid=0x%x sc_cmd=%p already in cleanup or abort processing or already completed.\n", io_req->xid, io_req->sc_cmd); rc = 1; + spin_unlock_irqrestore(&fcport->rport_lock, flags); goto drop_rdata_kref; }
+ /* Set the command type to abort */ + io_req->cmd_type = QEDF_ABTS; + spin_unlock_irqrestore(&fcport->rport_lock, flags); + kref_get(&io_req->refcount);
xid = io_req->xid; qedf->control_requests++; qedf->packet_aborts++;
- /* Set the command type to abort */ - io_req->cmd_type = QEDF_ABTS; io_req->return_scsi_cmd_on_abts = return_scsi_cmd_on_abts;
set_bit(QEDF_CMD_IN_ABORT, &io_req->flags); @@ -2210,7 +2214,9 @@ int qedf_initiate_cleanup(struct qedf_ioreq *io_req, refcount, fcport, fcport->rdata->ids.port_id);
/* Cleanup cmds re-use the same TID as the original I/O */ + spin_lock_irqsave(&fcport->rport_lock, flags); io_req->cmd_type = QEDF_CLEANUP; + spin_unlock_irqrestore(&fcport->rport_lock, flags); io_req->return_scsi_cmd_on_abts = return_scsi_cmd_on_abts;
init_completion(&io_req->cleanup_done); diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index c4f293d39f228..d969b0dc97326 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -2807,6 +2807,8 @@ void qedf_process_cqe(struct qedf_ctx *qedf, struct fcoe_cqe *cqe) struct qedf_ioreq *io_req; struct qedf_rport *fcport; u32 comp_type; + u8 io_comp_type; + unsigned long flags;
comp_type = (cqe->cqe_data >> FCOE_CQE_CQE_TYPE_SHIFT) & FCOE_CQE_CQE_TYPE_MASK; @@ -2840,11 +2842,14 @@ void qedf_process_cqe(struct qedf_ctx *qedf, struct fcoe_cqe *cqe) return; }
+ spin_lock_irqsave(&fcport->rport_lock, flags); + io_comp_type = io_req->cmd_type; + spin_unlock_irqrestore(&fcport->rport_lock, flags);
switch (comp_type) { case FCOE_GOOD_COMPLETION_CQE_TYPE: atomic_inc(&fcport->free_sqes); - switch (io_req->cmd_type) { + switch (io_comp_type) { case QEDF_SCSI_CMD: qedf_scsi_completion(qedf, cqe, io_req); break;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kiwoong Kim kwmad.kim@samsung.com
[ Upstream commit 2d3f59cf868b4a2dd678a96cd49bdd91411bd59f ]
__ufshcd_send_uic_cmd() is wrapped by uic_cmd_mutex and its related contexts are accessed within the section wrapped by uic_cmd_mutex. Thus, wrapping with host_lock is redundant.
Signed-off-by: Kiwoong Kim kwmad.kim@samsung.com Link: https://lore.kernel.org/r/782ba5f26f0a96e58d85dff50751787d2d2a6b2b.169379006... Reviewed-by: Bart Van Assche bvanassche@acm.org Reviewed-by: Chanwoo Lee cw9316.lee@samsung.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ufs/core/ufshcd.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 36437d39b93c8..135be6dd02523 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -2346,7 +2346,6 @@ __ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd, bool completion) { lockdep_assert_held(&hba->uic_cmd_mutex); - lockdep_assert_held(hba->host->host_lock);
if (!ufshcd_ready_for_uic_cmd(hba)) { dev_err(hba->dev, @@ -2373,7 +2372,6 @@ __ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd, int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) { int ret; - unsigned long flags;
if (hba->quirks & UFSHCD_QUIRK_BROKEN_UIC_CMD) return 0; @@ -2382,9 +2380,7 @@ int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) mutex_lock(&hba->uic_cmd_mutex); ufshcd_add_delay_before_dme_cmd(hba);
- spin_lock_irqsave(hba->host->host_lock, flags); ret = __ufshcd_send_uic_cmd(hba, uic_cmd, true); - spin_unlock_irqrestore(hba->host->host_lock, flags); if (!ret) ret = ufshcd_wait_for_uic_cmd(hba, uic_cmd);
@@ -4076,8 +4072,8 @@ static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd) wmb(); reenable_intr = true; } - ret = __ufshcd_send_uic_cmd(hba, cmd, false); spin_unlock_irqrestore(hba->host->host_lock, flags); + ret = __ufshcd_send_uic_cmd(hba, cmd, false); if (ret) { dev_err(hba->dev, "pwr ctrl cmd 0x%x with mode 0x%x uic error %d\n",
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kiwoong Kim kwmad.kim@samsung.com
[ Upstream commit d32533d30e2119b0c0aa17596734f1f842f750df ]
With auto hibern8 enabled, UIC could be busy processing a hibern8 operation and the HCI would reports UIC not ready for a short while through HCS.UCRDY. The UFS driver doesn't currently handle this situation. The UFSHCI spec specifies UCRDY like this: whether the host controller is ready to process UIC COMMAND
The 'ready' could be seen as many different meanings. If the meaning includes not processing any request from HCI, processing a hibern8 operation can be 'not ready'. In this situation, the driver needs to wait until the operations is completed.
Signed-off-by: Kiwoong Kim kwmad.kim@samsung.com Link: https://lore.kernel.org/r/550484ffb66300bdcec63d3e304dfd55cb432f1f.169379006... Reviewed-by: Adrian Hunter adrian.hunter@intel.com Reviewed-by: Chanwoo Lee cw9316.lee@samsung.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ufs/core/ufshcd.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 135be6dd02523..b4e3f14b9a3d7 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -22,6 +22,7 @@ #include <linux/module.h> #include <linux/regulator/consumer.h> #include <linux/sched/clock.h> +#include <linux/iopoll.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_dbg.h> #include <scsi/scsi_driver.h> @@ -2254,7 +2255,11 @@ static inline int ufshcd_hba_capabilities(struct ufs_hba *hba) */ static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba) { - return ufshcd_readl(hba, REG_CONTROLLER_STATUS) & UIC_COMMAND_READY; + u32 val; + int ret = read_poll_timeout(ufshcd_readl, val, val & UIC_COMMAND_READY, + 500, UIC_CMD_TIMEOUT * 1000, false, hba, + REG_CONTROLLER_STATUS); + return ret == 0 ? true : false; }
/**
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zheng Yejian zhengyejian1@huawei.com
[ Upstream commit f4e4ada586995b17f828c6d147d1800eb1471450 ]
Function instance_set() expects to enable event 'sched_switch', so we should set 1 to its 'enable' file.
Testcase passed after this patch: # ./ftracetest test.d/instances/instance-event.tc === Ftrace unit tests === [1] Test creation and deletion of trace instances while setting an event [PASS]
# of passed: 1 # of failed: 0 # of unresolved: 0 # of untested: 0 # of unsupported: 0 # of xfailed: 0 # of undefined(test bug): 0
Signed-off-by: Zheng Yejian zhengyejian1@huawei.com Acked-by: Masami Hiramatsu (Google) mhiramat@kernel.org Acked-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../testing/selftests/ftrace/test.d/instances/instance-event.tc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/ftrace/test.d/instances/instance-event.tc b/tools/testing/selftests/ftrace/test.d/instances/instance-event.tc index 0eb47fbb3f44d..42422e4251078 100644 --- a/tools/testing/selftests/ftrace/test.d/instances/instance-event.tc +++ b/tools/testing/selftests/ftrace/test.d/instances/instance-event.tc @@ -39,7 +39,7 @@ instance_read() {
instance_set() { while :; do - echo 1 > foo/events/sched/sched_switch + echo 1 > foo/events/sched/sched_switch/enable done 2> /dev/null }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zheng Yejian zhengyejian1@huawei.com
[ Upstream commit f6bd2c92488c30ef53b5bd80c52f0a7eee9d545a ]
When user resize all trace ring buffer through file 'buffer_size_kb', then in ring_buffer_resize(), kernel allocates buffer pages for each cpu in a loop.
If the kernel preemption model is PREEMPT_NONE and there are many cpus and there are many buffer pages to be allocated, it may not give up cpu for a long time and finally cause a softlockup.
To avoid it, call cond_resched() after each cpu buffer allocation.
Link: https://lore.kernel.org/linux-trace-kernel/20230906081930.3939106-1-zhengyej...
Cc: mhiramat@kernel.org Signed-off-by: Zheng Yejian zhengyejian1@huawei.com Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/ring_buffer.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index de55107aef5d5..42ad59a002365 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2212,6 +2212,8 @@ int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size, err = -ENOMEM; goto out_err; } + + cond_resched(); }
cpus_read_lock();
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana fdmanana@suse.com
[ Upstream commit a57c2d4e46f519b24558ae0752c17eec416ac72a ]
When removing a delayed item, or releasing which will remove it as well, we will modify one of the delayed node's rbtrees and item counter if the delayed item is in one of the rbtrees. This require having the delayed node's mutex locked, otherwise we will race with other tasks modifying the rbtrees and the counter.
This is motivated by a previous version of another patch actually calling btrfs_release_delayed_item() after unlocking the delayed node's mutex and against a delayed item that is in a rbtree.
So assert at __btrfs_remove_delayed_item() that the delayed node's mutex is locked.
Reviewed-by: Qu Wenruo wqu@suse.com Signed-off-by: Filipe Manana fdmanana@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/delayed-inode.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index 9dacf72a75d0e..1331e56e8e84f 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -407,6 +407,7 @@ static void finish_one_item(struct btrfs_delayed_root *delayed_root)
static void __btrfs_remove_delayed_item(struct btrfs_delayed_item *delayed_item) { + struct btrfs_delayed_node *delayed_node = delayed_item->delayed_node; struct rb_root_cached *root; struct btrfs_delayed_root *delayed_root;
@@ -414,18 +415,21 @@ static void __btrfs_remove_delayed_item(struct btrfs_delayed_item *delayed_item) if (RB_EMPTY_NODE(&delayed_item->rb_node)) return;
- delayed_root = delayed_item->delayed_node->root->fs_info->delayed_root; + /* If it's in a rbtree, then we need to have delayed node locked. */ + lockdep_assert_held(&delayed_node->mutex); + + delayed_root = delayed_node->root->fs_info->delayed_root;
BUG_ON(!delayed_root);
if (delayed_item->type == BTRFS_DELAYED_INSERTION_ITEM) - root = &delayed_item->delayed_node->ins_root; + root = &delayed_node->ins_root; else - root = &delayed_item->delayed_node->del_root; + root = &delayed_node->del_root;
rb_erase_cached(&delayed_item->rb_node, root); RB_CLEAR_NODE(&delayed_item->rb_node); - delayed_item->delayed_node->count--; + delayed_node->count--;
finish_one_item(delayed_root); }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ricardo B. Marliere rbmarliere@gmail.com
[ Upstream commit 5f9dd2e896a91bfca90f8463eb6808c03d535d8a ]
This patch fixes inconsistencies in the parsing rules of the levels 1 and 2 of the kselftest_deps.sh. It was added the levels 4 and 5 to account for a few edge cases that are present in some tests, also some minor identation styling have been fixed (s/ /\t/g).
Signed-off-by: Ricardo B. Marliere rbmarliere@gmail.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/kselftest_deps.sh | 77 +++++++++++++++++++---- 1 file changed, 65 insertions(+), 12 deletions(-)
diff --git a/tools/testing/selftests/kselftest_deps.sh b/tools/testing/selftests/kselftest_deps.sh index 708cb54296336..47a1281a3b702 100755 --- a/tools/testing/selftests/kselftest_deps.sh +++ b/tools/testing/selftests/kselftest_deps.sh @@ -46,11 +46,11 @@ fi print_targets=0
while getopts "p" arg; do - case $arg in - p) + case $arg in + p) print_targets=1 shift;; - esac + esac done
if [ $# -eq 0 ] @@ -92,6 +92,10 @@ pass_cnt=0 # Get all TARGETS from selftests Makefile targets=$(egrep "^TARGETS +|^TARGETS =" Makefile | cut -d "=" -f2)
+# Initially, in LDLIBS related lines, the dep checker needs +# to ignore lines containing the following strings: +filter="$(VAR_LDLIBS)|pkg-config|PKG_CONFIG|IOURING_EXTRA_LIBS" + # Single test case if [ $# -eq 2 ] then @@ -100,6 +104,8 @@ then l1_test $test l2_test $test l3_test $test + l4_test $test + l5_test $test
print_results $1 $2 exit $? @@ -113,7 +119,7 @@ fi # Append space at the end of the list to append more tests.
l1_tests=$(grep -r --include=Makefile "^LDLIBS" | \ - grep -v "VAR_LDLIBS" | awk -F: '{print $1}') + grep -v "$filter" | awk -F: '{print $1}' | uniq)
# Level 2: LDLIBS set dynamically. # @@ -126,7 +132,7 @@ l1_tests=$(grep -r --include=Makefile "^LDLIBS" | \ # Append space at the end of the list to append more tests.
l2_tests=$(grep -r --include=Makefile ": LDLIBS" | \ - grep -v "VAR_LDLIBS" | awk -F: '{print $1}') + grep -v "$filter" | awk -F: '{print $1}' | uniq)
# Level 3 # memfd and others use pkg-config to find mount and fuse libs @@ -138,11 +144,32 @@ l2_tests=$(grep -r --include=Makefile ": LDLIBS" | \ # VAR_LDLIBS := $(shell pkg-config fuse --libs 2>/dev/null)
l3_tests=$(grep -r --include=Makefile "^VAR_LDLIBS" | \ - grep -v "pkg-config" | awk -F: '{print $1}') + grep -v "pkg-config|PKG_CONFIG" | awk -F: '{print $1}' | uniq)
-#echo $l1_tests -#echo $l2_1_tests -#echo $l3_tests +# Level 4 +# some tests may fall back to default using `|| echo -l<libname>` +# if pkg-config doesn't find the libs, instead of using VAR_LDLIBS +# as per level 3 checks. +# e.g: +# netfilter/Makefile +# LDLIBS += $(shell $(HOSTPKG_CONFIG) --libs libmnl 2>/dev/null || echo -lmnl) +l4_tests=$(grep -r --include=Makefile "^LDLIBS" | \ + grep "pkg-config|PKG_CONFIG" | awk -F: '{print $1}' | uniq) + +# Level 5 +# some tests may use IOURING_EXTRA_LIBS to add extra libs to LDLIBS, +# which in turn may be defined in a sub-Makefile +# e.g.: +# mm/Makefile +# $(OUTPUT)/gup_longterm: LDLIBS += $(IOURING_EXTRA_LIBS) +l5_tests=$(grep -r --include=Makefile "LDLIBS +=.*$(IOURING_EXTRA_LIBS)" | \ + awk -F: '{print $1}' | uniq) + +#echo l1_tests $l1_tests +#echo l2_tests $l2_tests +#echo l3_tests $l3_tests +#echo l4_tests $l4_tests +#echo l5_tests $l5_tests
all_tests print_results $1 $2 @@ -164,24 +191,32 @@ all_tests() for test in $l3_tests; do l3_test $test done + + for test in $l4_tests; do + l4_test $test + done + + for test in $l5_tests; do + l5_test $test + done }
# Use same parsing used for l1_tests and pick libraries this time. l1_test() { test_libs=$(grep --include=Makefile "^LDLIBS" $test | \ - grep -v "VAR_LDLIBS" | \ + grep -v "$filter" | \ sed -e 's/:/ /' | \ sed -e 's/+/ /' | cut -d "=" -f 2)
check_libs $test $test_libs }
-# Use same parsing used for l2__tests and pick libraries this time. +# Use same parsing used for l2_tests and pick libraries this time. l2_test() { test_libs=$(grep --include=Makefile ": LDLIBS" $test | \ - grep -v "VAR_LDLIBS" | \ + grep -v "$filter" | \ sed -e 's/:/ /' | sed -e 's/+/ /' | \ cut -d "=" -f 2)
@@ -197,6 +232,24 @@ l3_test() check_libs $test $test_libs }
+l4_test() +{ + test_libs=$(grep --include=Makefile "^VAR_LDLIBS|^LDLIBS" $test | \ + grep "(pkg-config|PKG_CONFIG).*|| echo " | \ + sed -e 's/.*|| echo //' | sed -e 's/)$//') + + check_libs $test $test_libs +} + +l5_test() +{ + tests=$(find $(dirname "$test") -type f -name "*.mk") + test_libs=$(grep "^IOURING_EXTRA_LIBS +?=" $tests | \ + cut -d "=" -f 2) + + check_libs $test $test_libs +} + check_libs() {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (Google) rostedt@goodmis.org
[ Upstream commit 95a404bd60af6c4d9d8db01ad14fe8957ece31ca ]
When iterating over the ring buffer while the ring buffer is active, the writer can corrupt the reader. There's barriers to help detect this and handle it, but that code missed the case where the last event was at the very end of the page and has only 4 bytes left.
The checks to detect the corruption by the writer to reads needs to see the length of the event. If the length in the first 4 bytes is zero then the length is stored in the second 4 bytes. But if the writer is in the process of updating that code, there's a small window where the length in the first 4 bytes could be zero even though the length is only 4 bytes. That will cause rb_event_length() to read the next 4 bytes which could happen to be off the allocated page.
To protect against this, fail immediately if the next event pointer is less than 8 bytes from the end of the commit (last byte of data), as all events must be a minimum of 8 bytes anyway.
Link: https://lore.kernel.org/all/20230905141245.26470-1-Tze-nan.Wu@mediatek.com/ Link: https://lore.kernel.org/linux-trace-kernel/20230907122820.0899019c@gandalf.l...
Cc: Masami Hiramatsu mhiramat@kernel.org Cc: Mark Rutland mark.rutland@arm.com Reported-by: Tze-nan Wu Tze-nan.Wu@mediatek.com Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/ring_buffer.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 42ad59a002365..c0b708b55c3b9 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2388,6 +2388,11 @@ rb_iter_head_event(struct ring_buffer_iter *iter) */ commit = rb_page_commit(iter_head_page); smp_rmb(); + + /* An event needs to be at least 8 bytes in size */ + if (iter->head > commit - 8) + goto reset; + event = __rb_page_index(iter_head_page, iter->head); length = rb_event_length(event);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guangguan Wang guangguan.wang@linux.alibaba.com
[ Upstream commit 6912e724832c47bb381eb1bd1e483ec8df0d0f0f ]
In the macro SMC_STAT_SERV_SUCC_INC, the smcd_version is used to determin whether to increase the v1 statistic or the v2 statistic. It is correct for SMCD. But for SMCR, smcr_version should be used.
Signed-off-by: Guangguan Wang guangguan.wang@linux.alibaba.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/smc/smc_stats.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/smc/smc_stats.h b/net/smc/smc_stats.h index 84b7ecd8c05ca..4dbc237b7c19e 100644 --- a/net/smc/smc_stats.h +++ b/net/smc/smc_stats.h @@ -244,8 +244,9 @@ while (0) #define SMC_STAT_SERV_SUCC_INC(net, _ini) \ do { \ typeof(_ini) i = (_ini); \ - bool is_v2 = (i->smcd_version & SMC_V2); \ bool is_smcd = (i->is_smcd); \ + u8 version = is_smcd ? i->smcd_version : i->smcr_version; \ + bool is_v2 = (version & SMC_V2); \ typeof(net->smc.smc_stats) smc_stats = (net)->smc.smc_stats; \ if (is_v2 && is_smcd) \ this_cpu_inc(smc_stats->smc[SMC_TYPE_D].srv_v2_succ_cnt); \
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit e97eb65dd464e7f118a16a26337322d07eb653e2 ]
snprintf() returns the "number of characters which *would* be generated for the given input", not the size *really* generated.
In order to avoid too large values for 'o' (and potential negative values for "sizeof(linebuf) o") use scnprintf() instead of snprintf().
Note that given the "w < 4" in the for loop, the buffer can NOT overflow, but using the *right* function is always better.
Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: Damien Le Moal dlemoal@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/sata_mv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index e3cff01201b80..17f9062b0eaa5 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1255,8 +1255,8 @@ static void mv_dump_mem(struct device *dev, void __iomem *start, unsigned bytes)
for (b = 0; b < bytes; ) { for (w = 0, o = 0; b < bytes && w < 4; w++) { - o += snprintf(linebuf + o, sizeof(linebuf) - o, - "%08x ", readl(start + b)); + o += scnprintf(linebuf + o, sizeof(linebuf) - o, + "%08x ", readl(start + b)); b += sizeof(u32); } dev_dbg(dev, "%s: %p: %s\n",
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Thompson davthompson@nvidia.com
[ Upstream commit c2dffda1d8f7511505bbbf16ba282f2079b30089 ]
The latest version of the mlxbf_bootctl driver utilizes "sysfs_format_mac", and this API is only available if NET is defined in the kernel configuration. This patch changes the mlxbf_bootctl Kconfig to depend on NET.
Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202309031058.JvwNDBKt-lkp@intel.com/ Reported-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: David Thompson davthompson@nvidia.com Link: https://lore.kernel.org/r/20230905133243.31550-1-davthompson@nvidia.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/mellanox/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/platform/mellanox/Kconfig b/drivers/platform/mellanox/Kconfig index 30b50920b278c..f7dfa0e785fd6 100644 --- a/drivers/platform/mellanox/Kconfig +++ b/drivers/platform/mellanox/Kconfig @@ -60,6 +60,7 @@ config MLXBF_BOOTCTL tristate "Mellanox BlueField Firmware Boot Control driver" depends on ARM64 depends on ACPI + depends on NET help The Mellanox BlueField firmware implements functionality to request swapping the primary and alternate eMMC boot partition,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Luke D. Jones luke@ljones.dev
[ Upstream commit 4106a70ddad57ee6d8f98b81d6f036740c72762b ]
Add quirk for ASUS ROG X16 (GV601V, 2023 versions) Flow 2-in-1 to enable tablet mode with lid flip (all screen rotations).
Signed-off-by: Luke D. Jones luke@ljones.dev Link: https://lore.kernel.org/r/20230905082813.13470-1-luke@ljones.dev Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/asus-nb-wmi.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c index fdf7da06af306..d85d895fee894 100644 --- a/drivers/platform/x86/asus-nb-wmi.c +++ b/drivers/platform/x86/asus-nb-wmi.c @@ -478,6 +478,15 @@ static const struct dmi_system_id asus_quirks[] = { }, .driver_data = &quirk_asus_tablet_mode, }, + { + .callback = dmi_matched, + .ident = "ASUS ROG FLOW X16", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "GV601V"), + }, + .driver_data = &quirk_asus_tablet_mode, + }, { .callback = dmi_matched, .ident = "ASUS VivoBook E410MA",
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julia Lawall Julia.Lawall@inria.fr
[ Upstream commit 8a81cf96f5510aaf9a65d103f7405079a7b0fcc5 ]
for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put.
This was done using the Coccinelle semantic patch iterators/for_each_child.cocci
Signed-off-by: Julia Lawall Julia.Lawall@inria.fr Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/thermal_of.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c index 762d1990180bf..4104743dbc17e 100644 --- a/drivers/thermal/thermal_of.c +++ b/drivers/thermal/thermal_of.c @@ -149,8 +149,10 @@ static int of_find_trip_id(struct device_node *np, struct device_node *trip) */ for_each_child_of_node(trips, t) {
- if (t == trip) + if (t == trip) { + of_node_put(t); goto out; + } i++; }
@@ -519,8 +521,10 @@ static int thermal_of_for_each_cooling_maps(struct thermal_zone_device *tz,
for_each_child_of_node(cm_np, child) { ret = thermal_of_for_each_cooling_device(tz_np, child, tz, cdev, action); - if (ret) + if (ret) { + of_node_put(child); break; + } }
of_node_put(cm_np);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Swapnil Patel swapnil.patel@amd.com
[ Upstream commit f5b2c10b57615828b531bb0ae56bd6325a41167e ]
[Why] Currently the driver looks DCN registers to access if BL is on or not. This check is not valid if we are using AUX based brightness control. This causes driver to not send out "backlight off" command during power off sequence as it already thinks it is off.
[How] Only check DCN registers if we aren't using AUX based brightness control.
Reviewed-by: Wenjing Liu wenjing.liu@amd.com Acked-by: Stylon Wang stylon.wang@amd.com Signed-off-by: Swapnil Patel swapnil.patel@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index 9378c98d02cfe..508f5fe268484 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -973,7 +973,9 @@ void dce110_edp_backlight_control( return; }
- if (link->panel_cntl) { + if (link->panel_cntl && !(link->dpcd_sink_ext_caps.bits.oled || + link->dpcd_sink_ext_caps.bits.hdr_aux_backlight_control == 1 || + link->dpcd_sink_ext_caps.bits.sdr_aux_backlight_control == 1)) { bool is_backlight_on = link->panel_cntl->funcs->is_panel_backlight_on(link->panel_cntl);
if ((enable && is_backlight_on) || (!enable && !is_backlight_on)) {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher alexander.deucher@amd.com
[ Upstream commit 1832403cd41ca6b19b24e9d64f79cb08d920ca44 ]
This matches the behavior for soc15 and nv.
Acked-by: Christian König christian.koenig@amd.com Reviewed-by: Timmy Tsai timmtsai@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/soc21.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/soc21.c b/drivers/gpu/drm/amd/amdgpu/soc21.c index d150a90daa403..56af7b5abac14 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc21.c +++ b/drivers/gpu/drm/amd/amdgpu/soc21.c @@ -755,7 +755,7 @@ static int soc21_common_hw_init(void *handle) * for the purpose of expose those registers * to process space */ - if (adev->nbio.funcs->remap_hdp_registers) + if (adev->nbio.funcs->remap_hdp_registers && !amdgpu_sriov_vf(adev)) adev->nbio.funcs->remap_hdp_registers(adev); /* enable the doorbell aperture */ soc21_enable_doorbell_aperture(adev, true);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher alexander.deucher@amd.com
[ Upstream commit ab43213e7afd08ac68d4282060bacf309e70fd14 ]
Needed for HDP flush to work correctly.
Reviewed-by: Timmy Tsai timmtsai@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/nbio_v4_3.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/nbio_v4_3.c b/drivers/gpu/drm/amd/amdgpu/nbio_v4_3.c index 09fdcd20cb919..c52a378396af1 100644 --- a/drivers/gpu/drm/amd/amdgpu/nbio_v4_3.c +++ b/drivers/gpu/drm/amd/amdgpu/nbio_v4_3.c @@ -344,6 +344,9 @@ static void nbio_v4_3_init_registers(struct amdgpu_device *adev) data &= ~RCC_DEV0_EPF2_STRAP2__STRAP_NO_SOFT_RESET_DEV0_F2_MASK; WREG32_SOC15(NBIO, 0, regRCC_DEV0_EPF2_STRAP2, data); } + if (amdgpu_sriov_vf(adev)) + adev->rmmio_remap.reg_offset = SOC15_REG_OFFSET(NBIO, 0, + regBIF_BX_DEV0_EPF0_VF0_HDP_MEM_COHERENCY_FLUSH_CNTL) << 2; }
static u32 nbio_v4_3_get_rom_offset(struct amdgpu_device *adev)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Francis David.Francis@amd.com
[ Upstream commit 5e7e82254270c8cf8b107451c5de01cee2f135ae ]
On some APU systems, there is no atom context and so the atom_context struct is null.
Add a check to the VBIOS_INFO branch of amdgpu_info_ioctl to handle this case, returning all zeroes.
Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: David Francis David.Francis@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index 9e3313dd956ae..24b4bd6bb2771 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -896,12 +896,17 @@ int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) struct atom_context *atom_context;
atom_context = adev->mode_info.atom_context; - memcpy(vbios_info.name, atom_context->name, sizeof(atom_context->name)); - memcpy(vbios_info.vbios_pn, atom_context->vbios_pn, sizeof(atom_context->vbios_pn)); - vbios_info.version = atom_context->version; - memcpy(vbios_info.vbios_ver_str, atom_context->vbios_ver_str, - sizeof(atom_context->vbios_ver_str)); - memcpy(vbios_info.date, atom_context->date, sizeof(atom_context->date)); + if (atom_context) { + memcpy(vbios_info.name, atom_context->name, + sizeof(atom_context->name)); + memcpy(vbios_info.vbios_pn, atom_context->vbios_pn, + sizeof(atom_context->vbios_pn)); + vbios_info.version = atom_context->version; + memcpy(vbios_info.vbios_ver_str, atom_context->vbios_ver_str, + sizeof(atom_context->vbios_ver_str)); + memcpy(vbios_info.date, atom_context->date, + sizeof(atom_context->date)); + }
return copy_to_user(out, &vbios_info, min((size_t)size, sizeof(vbios_info))) ? -EFAULT : 0;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Icenowy Zheng uwu@icenowy.me
[ Upstream commit 8eb8fe67e2c84324398f5983c41b4f831d0705b3 ]
The dcache.cva encoding shown in the comments are wrong, it's for dcache.cval1 (which is restricted to L1) instead.
Fix this in the comment and in the hardcoded instruction.
Signed-off-by: Icenowy Zheng uwu@icenowy.me Tested-by: Sergey Matyukevich sergey.matyukevich@syntacore.com Reviewed-by: Heiko Stuebner heiko@sntech.de Reviewed-by: Guo Ren guoren@kernel.org Tested-by: Drew Fustini dfustini@baylibre.com Link: https://lore.kernel.org/r/20230912072410.2481-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt palmer@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/include/asm/errata_list.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h index 19a771085781a..7d2675bb71611 100644 --- a/arch/riscv/include/asm/errata_list.h +++ b/arch/riscv/include/asm/errata_list.h @@ -100,7 +100,7 @@ asm volatile(ALTERNATIVE( \ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 | * 0000001 01001 rs1 000 00000 0001011 * dcache.cva rs1 (clean, virtual address) - * 0000001 00100 rs1 000 00000 0001011 + * 0000001 00101 rs1 000 00000 0001011 * * dcache.cipa rs1 (clean then invalidate, physical address) * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 | @@ -113,7 +113,7 @@ asm volatile(ALTERNATIVE( \ * 0000000 11001 00000 000 00000 0001011 */ #define THEAD_inval_A0 ".long 0x0265000b" -#define THEAD_clean_A0 ".long 0x0245000b" +#define THEAD_clean_A0 ".long 0x0255000b" #define THEAD_flush_A0 ".long 0x0275000b" #define THEAD_SYNC_S ".long 0x0190000b"
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Grzedzicki mge@meta.com
[ Upstream commit 71996bb835aed58c7ec4967be1d05190a27339ec ]
Some cards have more than one SAS address. Using an incorrect address causes communication issues with some devices like expanders.
Closes: https://lore.kernel.org/linux-kernel/A57AEA84-5CA0-403E-8053-106033C73C70@fb... Signed-off-by: Michal Grzedzicki mge@meta.com Link: https://lore.kernel.org/r/20230913155611.3183612-1-mge@meta.com Acked-by: Jack Wang jinpu.wang@ionos.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/pm8001/pm8001_hwi.c | 2 +- drivers/scsi/pm8001/pm80xx_hwi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 628b08ba6770b..e2c52c2d00b33 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -4313,7 +4313,7 @@ pm8001_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) payload.sas_identify.dev_type = SAS_END_DEVICE; payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL; memcpy(payload.sas_identify.sas_addr, - pm8001_ha->sas_addr, SAS_ADDR_SIZE); + &pm8001_ha->phy[phy_id].dev_sas_addr, SAS_ADDR_SIZE); payload.sas_identify.phy_id = phy_id;
return pm8001_mpi_build_cmd(pm8001_ha, 0, opcode, &payload, diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index f8b8624458f73..bcccea7c1244a 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -4803,7 +4803,7 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) payload.sas_identify.dev_type = SAS_END_DEVICE; payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL; memcpy(payload.sas_identify.sas_addr, - &pm8001_ha->sas_addr, SAS_ADDR_SIZE); + &pm8001_ha->phy[phy_id].dev_sas_addr, SAS_ADDR_SIZE); payload.sas_identify.phy_id = phy_id;
return pm8001_mpi_build_cmd(pm8001_ha, 0, opcode, &payload,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Grzedzicki mge@meta.com
[ Upstream commit c13e7331745852d0dd7c35eabbe181cbd5b01172 ]
Tags allocated for OPC_INB_SET_CONTROLLER_CONFIG command need to be freed when we receive the response.
Signed-off-by: Michal Grzedzicki mge@meta.com Link: https://lore.kernel.org/r/20230911170340.699533-2-mge@meta.com Acked-by: Jack Wang jinpu.wang@ionos.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/pm8001/pm80xx_hwi.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index bcccea7c1244a..2bf293e8f7472 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -3750,10 +3750,12 @@ static int mpi_set_controller_config_resp(struct pm8001_hba_info *pm8001_ha, (struct set_ctrl_cfg_resp *)(piomb + 4); u32 status = le32_to_cpu(pPayload->status); u32 err_qlfr_pgcd = le32_to_cpu(pPayload->err_qlfr_pgcd); + u32 tag = le32_to_cpu(pPayload->tag);
pm8001_dbg(pm8001_ha, MSG, "SET CONTROLLER RESP: status 0x%x qlfr_pgcd 0x%x\n", status, err_qlfr_pgcd); + pm8001_tag_free(pm8001_ha, tag);
return 0; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steve French stfrench@microsoft.com
[ Upstream commit ebc3d4e44a7e05457825e03d0560153687265523 ]
checkpatch flagged a few places with: WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP Also fixed minor typo
Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/inode.c | 2 +- fs/smb/client/smb2ops.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/smb/client/inode.c b/fs/smb/client/inode.c index 92c1ed9304be7..9531ea2430899 100644 --- a/fs/smb/client/inode.c +++ b/fs/smb/client/inode.c @@ -2605,7 +2605,7 @@ int cifs_fiemap(struct inode *inode, struct fiemap_extent_info *fei, u64 start, }
cifsFileInfo_put(cfile); - return -ENOTSUPP; + return -EOPNOTSUPP; }
int cifs_truncate_page(struct address_space *mapping, loff_t from) diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index 1387d5126f53b..efff7137412b4 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -292,7 +292,7 @@ smb2_adjust_credits(struct TCP_Server_Info *server, cifs_server_dbg(VFS, "request has less credits (%d) than required (%d)", credits->value, new_val);
- return -ENOTSUPP; + return -EOPNOTSUPP; }
spin_lock(&server->req_lock); @@ -1155,7 +1155,7 @@ smb2_set_ea(const unsigned int xid, struct cifs_tcon *tcon, /* Use a fudge factor of 256 bytes in case we collide * with a different set_EAs command. */ - if(CIFSMaxBufSize - MAX_SMB2_CREATE_RESPONSE_SIZE - + if (CIFSMaxBufSize - MAX_SMB2_CREATE_RESPONSE_SIZE - MAX_SMB2_CLOSE_RESPONSE_SIZE - 256 < used_len + ea_name_len + ea_value_len + 1) { rc = -ENOSPC; @@ -4721,7 +4721,7 @@ handle_read_data(struct TCP_Server_Info *server, struct mid_q_entry *mid,
if (shdr->Command != SMB2_READ) { cifs_server_dbg(VFS, "only big read responses are supported\n"); - return -ENOTSUPP; + return -EOPNOTSUPP; }
if (server->ops->is_session_expired &&
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Niklas Cassel niklas.cassel@wdc.com
[ Upstream commit 80cc944eca4f0baa9c381d0706f3160e491437f2 ]
ata_scsi_port_error_handler() starts off by clearing ATA_PFLAG_EH_PENDING, before calling ap->ops->error_handler() (without holding the ap->lock).
If an error IRQ is received while ap->ops->error_handler() is running, the irq handler will set ATA_PFLAG_EH_PENDING.
Once ap->ops->error_handler() returns, ata_scsi_port_error_handler() checks if ATA_PFLAG_EH_PENDING is set, and if it is, another iteration of ATA EH is performed.
The problem is that ATA_PFLAG_EH_PENDING is not only cleared by ata_scsi_port_error_handler(), it is also cleared by ata_eh_reset().
ata_eh_reset() is called by ap->ops->error_handler(). This additional clearing done by ata_eh_reset() breaks the whole retry logic in ata_scsi_port_error_handler(). Thus, if an error IRQ is received while ap->ops->error_handler() is running, the port will currently remain frozen and will never get re-enabled.
The additional clearing in ata_eh_reset() was introduced in commit 1e641060c4b5 ("libata: clear eh_info on reset completion").
Looking at the original error report: https://marc.info/?l=linux-ide&m=124765325828495&w=2
We can see the following happening: [ 1.074659] ata3: XXX port freeze [ 1.074700] ata3: XXX hardresetting link, stopping engine [ 1.074746] ata3: XXX flipping SControl
[ 1.411471] ata3: XXX irq_stat=400040 CONN|PHY [ 1.411475] ata3: XXX port freeze
[ 1.420049] ata3: XXX starting engine [ 1.420096] ata3: XXX rc=0, class=1 [ 1.420142] ata3: XXX clearing IRQs for thawing [ 1.420188] ata3: XXX port thawed [ 1.420234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
We are not supposed to be able to receive an error IRQ while the port is frozen (PxIE is set to 0, i.e. all IRQs for the port are disabled).
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) states: "Each bit location can be thought of as reporting a '1' if the virtual "interrupt line" for that port is indicating it wishes to generate an interrupt. That is, if a port has one or more interrupt status bit set, and the enables for those status bits are set, then this bit shall be set."
Additionally, AHCI state P:ComInit clearly shows that the state machine will only jump to P:ComInitSetIS (which sets IS.IPS(x) to '1'), if PxIE.PCE is set to '1'. In our case, PxIE is set to 0, so IS.IPS(x) won't get set.
So IS.IPS(x) only gets set if PxIS and PxIE is set.
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) also states: "The bits in this register are read/write clear. It is set by the level of the virtual interrupt line being a set, and cleared by a write of '1' from the software."
So if IS.IPS(x) is set, you need to explicitly clear it by writing a 1 to IS.IPS(x) for that port.
Since PxIE is cleared, the only way to get an interrupt while the port is frozen, is if IS.IPS(x) is set, and the only way IS.IPS(x) can be set when the port is frozen, is if it was set before the port was frozen.
However, since commit 737dd811a3db ("ata: libahci: clear pending interrupt status"), we clear both PxIS and IS.IPS(x) after freezing the port, but before the COMRESET, so the problem that commit 1e641060c4b5 ("libata: clear eh_info on reset completion") fixed can no longer happen.
Thus, revert commit 1e641060c4b5 ("libata: clear eh_info on reset completion"), so that the retry logic in ata_scsi_port_error_handler() works once again. (The retry logic is still needed, since we can still get an error IRQ _after_ the port has been thawed, but before ata_scsi_port_error_handler() takes the ap->lock in order to check if ATA_PFLAG_EH_PENDING is set.)
Signed-off-by: Niklas Cassel niklas.cassel@wdc.com Signed-off-by: Damien Le Moal dlemoal@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/libata-eh.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index a3ae5fc2a42fc..6d4c80b6daaef 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2704,18 +2704,11 @@ int ata_eh_reset(struct ata_link *link, int classify, } }
- /* - * Some controllers can't be frozen very well and may set spurious - * error conditions during reset. Clear accumulated error - * information and re-thaw the port if frozen. As reset is the - * final recovery action and we cross check link onlineness against - * device classification later, no hotplug event is lost by this. - */ + /* clear cached SError */ spin_lock_irqsave(link->ap->lock, flags); - memset(&link->eh_info, 0, sizeof(link->eh_info)); + link->eh_info.serror = 0; if (slave) - memset(&slave->eh_info, 0, sizeof(link->eh_info)); - ap->pflags &= ~ATA_PFLAG_EH_PENDING; + slave->eh_info.serror = 0; spin_unlock_irqrestore(link->ap->lock, flags);
if (ap->pflags & ATA_PFLAG_FROZEN)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Han Xu han.xu@nxp.com
[ Upstream commit 18495676f7886e105133f1dc06c1d5e8d5436f32 ]
Reset the FLSHxCR1 registers to default value. ROM may set the register value and it affects the SPI NAND normal functions.
Signed-off-by: Han Xu han.xu@nxp.com Link: https://lore.kernel.org/r/20230906183254.235847-1-han.xu@nxp.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-nxp-fspi.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c index d6a65a989ef80..c7a4a3606547e 100644 --- a/drivers/spi/spi-nxp-fspi.c +++ b/drivers/spi/spi-nxp-fspi.c @@ -1029,6 +1029,13 @@ static int nxp_fspi_default_setup(struct nxp_fspi *f) fspi_writel(f, FSPI_AHBCR_PREF_EN | FSPI_AHBCR_RDADDROPT, base + FSPI_AHBCR);
+ /* Reset the FLSHxCR1 registers. */ + reg = FSPI_FLSHXCR1_TCSH(0x3) | FSPI_FLSHXCR1_TCSS(0x3); + fspi_writel(f, reg, base + FSPI_FLSHA1CR1); + fspi_writel(f, reg, base + FSPI_FLSHA2CR1); + fspi_writel(f, reg, base + FSPI_FLSHB1CR1); + fspi_writel(f, reg, base + FSPI_FLSHB2CR1); + /* AHB Read - Set lut sequence ID for all CS. */ fspi_writel(f, SEQID_LUT, base + FSPI_FLSHA1CR2); fspi_writel(f, SEQID_LUT, base + FSPI_FLSHA2CR2);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Valentin Caron valentin.caron@foss.st.com
[ Upstream commit 6de8a70c84ee0586fdde4e671626b9caca6aed74 ]
As explained in errata sheet, in section "2.14.5 Truncation of SPI output signals after EOT event": On STM32MP1x, EOT interrupt can be thrown before the true end of communication.
So we add a delay of a half period to wait the real end of the transmission.
Link: https://www.st.com/resource/en/errata_sheet/es0539-stm32mp131x3x5x-device-er... Signed-off-by: Valentin Caron valentin.caron@foss.st.com Link: https://lore.kernel.org/r/20230906132735.748174-1-valentin.caron@foss.st.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-stm32.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index def09cf0dc147..12241815510d4 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -268,6 +268,7 @@ struct stm32_spi_cfg { * @fifo_size: size of the embedded fifo in bytes * @cur_midi: master inter-data idleness in ns * @cur_speed: speed configured in Hz + * @cur_half_period: time of a half bit in us * @cur_bpw: number of bits in a single SPI data frame * @cur_fthlv: fifo threshold level (data frames in a single data packet) * @cur_comm: SPI communication mode @@ -294,6 +295,7 @@ struct stm32_spi {
unsigned int cur_midi; unsigned int cur_speed; + unsigned int cur_half_period; unsigned int cur_bpw; unsigned int cur_fthlv; unsigned int cur_comm; @@ -454,6 +456,8 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz,
spi->cur_speed = spi->clk_rate / (1 << mbrdiv);
+ spi->cur_half_period = DIV_ROUND_CLOSEST(USEC_PER_SEC, 2 * spi->cur_speed); + return mbrdiv - 1; }
@@ -695,6 +699,10 @@ static void stm32h7_spi_disable(struct stm32_spi *spi) return; }
+ /* Add a delay to make sure that transmission is ended. */ + if (spi->cur_half_period) + udelay(spi->cur_half_period); + if (spi->cur_usedma && spi->dma_tx) dmaengine_terminate_all(spi->dma_tx); if (spi->cur_usedma && spi->dma_rx)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shengjiu Wang shengjiu.wang@nxp.com
[ Upstream commit 2f9426905a63be7ccf8cd10109caf1848aa0993a ]
The rpmsg pcm device is a device which should support double buffering.
Found this issue with pipewire. When there is no SNDRV_PCM_INFO_BATCH flag in driver, the pipewire will set headroom to be zero, and because rpmsg pcm device don't support residue report, when the latency setting is small, the "delay" always larger than "target" in alsa-pcm.c, that reading next period data is not scheduled on time.
With SNDRV_PCM_INFO_BATCH flag in driver, the pipewire will select a smaller period size for device, then the task of reading next period data will be scheduled on time.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com Link: https://lore.kernel.org/r/1694414287-13291-1-git-send-email-shengjiu.wang@nx... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/fsl/imx-pcm-rpmsg.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/soc/fsl/imx-pcm-rpmsg.c b/sound/soc/fsl/imx-pcm-rpmsg.c index 35049043e5322..933bac7ea1864 100644 --- a/sound/soc/fsl/imx-pcm-rpmsg.c +++ b/sound/soc/fsl/imx-pcm-rpmsg.c @@ -19,6 +19,7 @@ static struct snd_pcm_hardware imx_rpmsg_pcm_hardware = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_BATCH | SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_NO_PERIOD_WAKEUP |
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mika Westerberg mika.westerberg@linux.intel.com
[ Upstream commit 9855d60cfc720ff32355484c119acafd3c4dc806 ]
Intel Granite Rapids has a flash controller that is compatible with the other Cannon Lake derivatives. Add Granite Rapids PCI ID to the driver list of supported devices.
Signed-off-by: Mika Westerberg mika.westerberg@linux.intel.com Link: https://lore.kernel.org/r/20230911074616.3473347-1-mika.westerberg@linux.int... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-intel-pci.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/spi/spi-intel-pci.c b/drivers/spi/spi-intel-pci.c index f0d532ea40e82..b718a74fa3edc 100644 --- a/drivers/spi/spi-intel-pci.c +++ b/drivers/spi/spi-intel-pci.c @@ -72,6 +72,7 @@ static const struct pci_device_id intel_spi_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x4da4), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0x51a4), (unsigned long)&cnl_info }, { PCI_VDEVICE(INTEL, 0x54a4), (unsigned long)&cnl_info }, + { PCI_VDEVICE(INTEL, 0x5794), (unsigned long)&cnl_info }, { PCI_VDEVICE(INTEL, 0x7a24), (unsigned long)&cnl_info }, { PCI_VDEVICE(INTEL, 0x7aa4), (unsigned long)&cnl_info }, { PCI_VDEVICE(INTEL, 0x7e23), (unsigned long)&cnl_info },
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hou Tao houtao1@huawei.com
[ Upstream commit c930472552022bd09aab3cd946ba3f243070d5c7 ]
Add extra check in bpf_mem_alloc_init() to ensure the unit_size of bpf_mem_cache is matched with the object_size of underlying slab cache. If these two sizes are unmatched, print a warning once and return -EINVAL in bpf_mem_alloc_init(), so the mismatch can be found early and the potential issue can be prevented.
Suggested-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Hou Tao houtao1@huawei.com Link: https://lore.kernel.org/r/20230908133923.2675053-4-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/bpf/memalloc.c | 33 +++++++++++++++++++++++++++++++-- 1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/kernel/bpf/memalloc.c b/kernel/bpf/memalloc.c index ace303a220ae8..f66a081195ac1 100644 --- a/kernel/bpf/memalloc.c +++ b/kernel/bpf/memalloc.c @@ -347,6 +347,24 @@ static void prefill_mem_cache(struct bpf_mem_cache *c, int cpu) alloc_bulk(c, c->unit_size <= 256 ? 4 : 1, cpu_to_node(cpu)); }
+static int check_obj_size(struct bpf_mem_cache *c, unsigned int idx) +{ + struct llist_node *first; + unsigned int obj_size; + + first = c->free_llist.first; + if (!first) + return 0; + + obj_size = ksize(first); + if (obj_size != c->unit_size) { + WARN_ONCE(1, "bpf_mem_cache[%u]: unexpected object size %u, expect %u\n", + idx, obj_size, c->unit_size); + return -EINVAL; + } + return 0; +} + /* When size != 0 bpf_mem_cache for each cpu. * This is typical bpf hash map use case when all elements have equal size. * @@ -357,10 +375,10 @@ static void prefill_mem_cache(struct bpf_mem_cache *c, int cpu) int bpf_mem_alloc_init(struct bpf_mem_alloc *ma, int size, bool percpu) { static u16 sizes[NUM_CACHES] = {96, 192, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096}; + int cpu, i, err, unit_size, percpu_size = 0; struct bpf_mem_caches *cc, __percpu *pcc; struct bpf_mem_cache *c, __percpu *pc; struct obj_cgroup *objcg = NULL; - int cpu, i, unit_size, percpu_size = 0;
if (size) { pc = __alloc_percpu_gfp(sizeof(*pc), 8, GFP_KERNEL); @@ -395,6 +413,7 @@ int bpf_mem_alloc_init(struct bpf_mem_alloc *ma, int size, bool percpu) pcc = __alloc_percpu_gfp(sizeof(*cc), 8, GFP_KERNEL); if (!pcc) return -ENOMEM; + err = 0; #ifdef CONFIG_MEMCG_KMEM objcg = get_obj_cgroup_from_current(); #endif @@ -405,10 +424,20 @@ int bpf_mem_alloc_init(struct bpf_mem_alloc *ma, int size, bool percpu) c->unit_size = sizes[i]; c->objcg = objcg; prefill_mem_cache(c, cpu); + err = check_obj_size(c, i); + if (err) + goto out; } } + +out: ma->caches = pcc; - return 0; + /* refill_work is either zeroed or initialized, so it is safe to + * call irq_work_sync(). + */ + if (err) + bpf_mem_alloc_destroy(ma); + return err; }
static void drain_mem_cache(struct bpf_mem_cache *c)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislav Fomichev sdf@google.com
[ Upstream commit 7cb779a6867fea00b4209bcf6de2f178a743247d ]
Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped packets") exposed the fact that bpf_clone_redirect is capable of returning raw NET_XMIT_XXX return codes.
This is in the conflict with its UAPI doc which says the following: "0 on success, or a negative error in case of failure."
Update the UAPI to reflect the fact that bpf_clone_redirect can return positive error numbers, but don't explicitly define their meaning.
Reported-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Stanislav Fomichev sdf@google.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/uapi/linux/bpf.h | 4 +++- tools/include/uapi/linux/bpf.h | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 51b9aa640ad2a..53bc487947197 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1837,7 +1837,9 @@ union bpf_attr { * performed again, if the helper is used in combination with * direct packet access. * Return - * 0 on success, or a negative error in case of failure. + * 0 on success, or a negative error in case of failure. Positive + * error indicates a potential drop or congestion in the target + * device. The particular positive error codes are not defined. * * u64 bpf_get_current_pid_tgid(void) * Description diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 51b9aa640ad2a..53bc487947197 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -1837,7 +1837,9 @@ union bpf_attr { * performed again, if the helper is used in combination with * direct packet access. * Return - * 0 on success, or a negative error in case of failure. + * 0 on success, or a negative error in case of failure. Positive + * error indicates a potential drop or congestion in the target + * device. The particular positive error codes are not defined. * * u64 bpf_get_current_pid_tgid(void) * Description
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Ujfalusi peter.ujfalusi@linux.intel.com
[ Upstream commit 485ddd519fbd89a9d9ac4b02be489e03cbbeebba ]
Use consistently u8 for sdw link index. The id is limited to 4, u8 is adequate in size to store it.
This change will also fixes the following compiler warning/error (W=1):
sound/hda/intel-sdw-acpi.c: In function ‘sdw_intel_acpi_scan’: sound/hda/intel-sdw-acpi.c:34:35: error: ‘-subproperties’ directive output may be truncated writing 14 bytes into a region of size between 7 and 17 [-Werror=format-truncation=] 34 | "mipi-sdw-link-%d-subproperties", i); | ^~~~~~~~~~~~~~ In function ‘is_link_enabled’, inlined from ‘sdw_intel_scan_controller’ at sound/hda/intel-sdw-acpi.c:106:8, inlined from ‘sdw_intel_acpi_scan’ at sound/hda/intel-sdw-acpi.c:180:9: sound/hda/intel-sdw-acpi.c:33:9: note: ‘snprintf’ output between 30 and 40 bytes into a destination of size 32 33 | snprintf(name, sizeof(name), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ 34 | "mipi-sdw-link-%d-subproperties", i); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors
The warnings got brought to light by a recent patch upstream: commit 6d4ab2e97dcf ("extrawarn: enable format and stringop overflow warnings in W=1")
Signed-off-by: Peter Ujfalusi peter.ujfalusi@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20230912162617.29178-1-peter.ujfalusi@linux.intel.... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/hda/intel-sdw-acpi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/hda/intel-sdw-acpi.c b/sound/hda/intel-sdw-acpi.c index 5cb92f7ccbcac..b57d72ea4503f 100644 --- a/sound/hda/intel-sdw-acpi.c +++ b/sound/hda/intel-sdw-acpi.c @@ -23,7 +23,7 @@ static int ctrl_link_mask; module_param_named(sdw_link_mask, ctrl_link_mask, int, 0444); MODULE_PARM_DESC(sdw_link_mask, "Intel link mask (one bit per link)");
-static bool is_link_enabled(struct fwnode_handle *fw_node, int i) +static bool is_link_enabled(struct fwnode_handle *fw_node, u8 idx) { struct fwnode_handle *link; char name[32]; @@ -31,7 +31,7 @@ static bool is_link_enabled(struct fwnode_handle *fw_node, int i)
/* Find master handle */ snprintf(name, sizeof(name), - "mipi-sdw-link-%d-subproperties", i); + "mipi-sdw-link-%hhu-subproperties", idx);
link = fwnode_get_named_child_node(fw_node, name); if (!link) @@ -51,8 +51,8 @@ static int sdw_intel_scan_controller(struct sdw_intel_acpi_info *info) { struct acpi_device *adev = acpi_fetch_acpi_dev(info->handle); - int ret, i; - u8 count; + u8 count, i; + int ret;
if (!adev) return -EINVAL;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Fitzgerald rf@opensource.cirrus.com
[ Upstream commit 41dac81b56c82c51a6d00fda5f3af7691ffee2d7 ]
The CS42L42 can accept very short reset pulses of a few microseconds but there's no reason to force a very short pulse. Allow a wide range for the usleep_range() so it can be relaxed about the choice of timing source.
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Signed-off-by: Stefan Binding sbinding@opensource.cirrus.com Link: https://lore.kernel.org/r/20230913150012.604775-2-sbinding@opensource.cirrus... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs42l42.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index 2fefbcf7bd130..914cdd737fa3b 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -2280,6 +2280,10 @@ int cs42l42_common_probe(struct cs42l42_private *cs42l42,
if (cs42l42->reset_gpio) { dev_dbg(cs42l42->dev, "Found reset GPIO\n"); + + /* Ensure minimum reset pulse width */ + usleep_range(10, 500); + gpiod_set_value_cansleep(cs42l42->reset_gpio, 1); } usleep_range(CS42L42_BOOT_TIME_US, CS42L42_BOOT_TIME_US * 2);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Fitzgerald rf@opensource.cirrus.com
[ Upstream commit a479b44ac0a0ac25cd48e5356200078924d78022 ]
The ACPI setting for a GPIO default state has higher priority than the flag passed to devm_gpiod_get_optional() so ACPI can override the GPIOD_OUT_LOW. Explicitly set the GPIO low when hard resetting.
Although GPIOD_OUT_LOW can't be relied on this doesn't seem like a reason to stop passing it to devm_gpiod_get_optional(). So we still pass it to state our intent, but can deal with it having no effect.
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Signed-off-by: Stefan Binding sbinding@opensource.cirrus.com Link: https://lore.kernel.org/r/20230913150012.604775-3-sbinding@opensource.cirrus... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs42l42.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index 914cdd737fa3b..735061690ded0 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -2281,6 +2281,12 @@ int cs42l42_common_probe(struct cs42l42_private *cs42l42, if (cs42l42->reset_gpio) { dev_dbg(cs42l42->dev, "Found reset GPIO\n");
+ /* + * ACPI can override the default GPIO state we requested + * so ensure that we start with RESET low. + */ + gpiod_set_value_cansleep(cs42l42->reset_gpio, 0); + /* Ensure minimum reset pulse width */ usleep_range(10, 500);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Fitzgerald rf@opensource.cirrus.com
[ Upstream commit 69343ce91435f222052015c5af86b550391bac85 ]
Change the logging of each algorithm from info level to debug level.
On the original devices supported by this code there were typically only one or two algorithms in a firmware and one or two DSPs so this logging only used a small number of log lines.
However, for the latest devices there could be 30-40 algorithms in a firmware and 8 DSPs being loaded in parallel, so using 300+ lines of log for information that isn't particularly important to have logged.
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Link: https://lore.kernel.org/r/20230913160523.3701189-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/cirrus/cs_dsp.c | 34 ++++++++++++++++---------------- 1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/firmware/cirrus/cs_dsp.c b/drivers/firmware/cirrus/cs_dsp.c index 81c5f94b1be11..64ed9d3f5d5d8 100644 --- a/drivers/firmware/cirrus/cs_dsp.c +++ b/drivers/firmware/cirrus/cs_dsp.c @@ -1821,15 +1821,15 @@ static int cs_dsp_adsp2_setup_algs(struct cs_dsp *dsp) return PTR_ERR(adsp2_alg);
for (i = 0; i < n_algs; i++) { - cs_dsp_info(dsp, - "%d: ID %x v%d.%d.%d XM@%x YM@%x ZM@%x\n", - i, be32_to_cpu(adsp2_alg[i].alg.id), - (be32_to_cpu(adsp2_alg[i].alg.ver) & 0xff0000) >> 16, - (be32_to_cpu(adsp2_alg[i].alg.ver) & 0xff00) >> 8, - be32_to_cpu(adsp2_alg[i].alg.ver) & 0xff, - be32_to_cpu(adsp2_alg[i].xm), - be32_to_cpu(adsp2_alg[i].ym), - be32_to_cpu(adsp2_alg[i].zm)); + cs_dsp_dbg(dsp, + "%d: ID %x v%d.%d.%d XM@%x YM@%x ZM@%x\n", + i, be32_to_cpu(adsp2_alg[i].alg.id), + (be32_to_cpu(adsp2_alg[i].alg.ver) & 0xff0000) >> 16, + (be32_to_cpu(adsp2_alg[i].alg.ver) & 0xff00) >> 8, + be32_to_cpu(adsp2_alg[i].alg.ver) & 0xff, + be32_to_cpu(adsp2_alg[i].xm), + be32_to_cpu(adsp2_alg[i].ym), + be32_to_cpu(adsp2_alg[i].zm));
alg_region = cs_dsp_create_region(dsp, WMFW_ADSP2_XM, adsp2_alg[i].alg.id, @@ -1954,14 +1954,14 @@ static int cs_dsp_halo_setup_algs(struct cs_dsp *dsp) return PTR_ERR(halo_alg);
for (i = 0; i < n_algs; i++) { - cs_dsp_info(dsp, - "%d: ID %x v%d.%d.%d XM@%x YM@%x\n", - i, be32_to_cpu(halo_alg[i].alg.id), - (be32_to_cpu(halo_alg[i].alg.ver) & 0xff0000) >> 16, - (be32_to_cpu(halo_alg[i].alg.ver) & 0xff00) >> 8, - be32_to_cpu(halo_alg[i].alg.ver) & 0xff, - be32_to_cpu(halo_alg[i].xm_base), - be32_to_cpu(halo_alg[i].ym_base)); + cs_dsp_dbg(dsp, + "%d: ID %x v%d.%d.%d XM@%x YM@%x\n", + i, be32_to_cpu(halo_alg[i].alg.id), + (be32_to_cpu(halo_alg[i].alg.ver) & 0xff0000) >> 16, + (be32_to_cpu(halo_alg[i].alg.ver) & 0xff00) >> 8, + be32_to_cpu(halo_alg[i].alg.ver) & 0xff, + be32_to_cpu(halo_alg[i].xm_base), + be32_to_cpu(halo_alg[i].ym_base));
ret = cs_dsp_halo_create_regions(dsp, halo_alg[i].alg.id, halo_alg[i].alg.ver,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Rapoport (IBM) rppt@kernel.org
[ Upstream commit 5e1bffbdb63baf89f3bf0b6bafb50903432a7434 ]
Building memblock tests produces the following warning:
cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT -c -o main.o main.c In file included from ../../include/linux/pfn.h:5, from ./linux/memory_hotplug.h:6, from ./linux/init.h:7, from ./linux/memblock.h:11, from tests/common.h:8, from tests/basic_api.h:5, from main.c:2: ../../include/linux/mm.h:14: warning: "__ALIGN_KERNEL" redefined 14 | #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1) | In file included from ../../include/linux/mm.h:6, from ../../include/linux/pfn.h:5, from ./linux/memory_hotplug.h:6, from ./linux/init.h:7, from ./linux/memblock.h:11, from tests/common.h:8, from tests/basic_api.h:5, from main.c:2: ../../include/uapi/linux/const.h:31: note: this is the location of the previous definition 31 | #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1) |
Remove definitions of __ALIGN_KERNEL and __ALIGN_KERNEL_MASK from tools/include/linux/mm.h to fix it.
Signed-off-by: Mike Rapoport (IBM) rppt@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/include/linux/mm.h | 2 -- 1 file changed, 2 deletions(-)
diff --git a/tools/include/linux/mm.h b/tools/include/linux/mm.h index a03d9bba51514..43be27bcc897d 100644 --- a/tools/include/linux/mm.h +++ b/tools/include/linux/mm.h @@ -11,8 +11,6 @@
#define PHYS_ADDR_MAX (~(phys_addr_t)0)
-#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1) -#define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask)) #define ALIGN(x, a) __ALIGN_KERNEL((x), (a)) #define ALIGN_DOWN(x, a) __ALIGN_KERNEL((x) - ((a) - 1), (a))
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Rapoport (IBM) rppt@kernel.org
[ Upstream commit 55122e0130e51eb71f5ec62d10525db0468f28e8 ]
Building memblock tests produces the following warning:
cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT -c -o main.o main.c In file included from tests/common.h:9, from tests/basic_api.h:5, from main.c:2: ./linux/memblock.h:601:50: warning: ‘struct seq_file’ declared inside parameter list will not be visible outside of this definition or declaration 601 | static inline void memtest_report_meminfo(struct seq_file *m) { } | ^~~~~~~~
Add declaration of 'struct seq_file' to tools/include/linux/seq_file.h to fix it.
Signed-off-by: Mike Rapoport (IBM) rppt@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/include/linux/seq_file.h | 2 ++ tools/testing/memblock/tests/basic_api.c | 2 +- tools/testing/memblock/tests/common.h | 1 + 3 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/tools/include/linux/seq_file.h b/tools/include/linux/seq_file.h index 102fd9217f1f9..f6bc226af0c1d 100644 --- a/tools/include/linux/seq_file.h +++ b/tools/include/linux/seq_file.h @@ -1,4 +1,6 @@ #ifndef _TOOLS_INCLUDE_LINUX_SEQ_FILE_H #define _TOOLS_INCLUDE_LINUX_SEQ_FILE_H
+struct seq_file; + #endif /* _TOOLS_INCLUDE_LINUX_SEQ_FILE_H */ diff --git a/tools/testing/memblock/tests/basic_api.c b/tools/testing/memblock/tests/basic_api.c index a13a57ba0815f..7ce628e31a431 100644 --- a/tools/testing/memblock/tests/basic_api.c +++ b/tools/testing/memblock/tests/basic_api.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-or-later +#include "basic_api.h" #include <string.h> #include <linux/memblock.h> -#include "basic_api.h"
#define EXPECTED_MEMBLOCK_REGIONS 128 #define FUNC_ADD "memblock_add" diff --git a/tools/testing/memblock/tests/common.h b/tools/testing/memblock/tests/common.h index d6bbbe63bfc36..4c33ce04c0645 100644 --- a/tools/testing/memblock/tests/common.h +++ b/tools/testing/memblock/tests/common.h @@ -5,6 +5,7 @@ #include <stdlib.h> #include <assert.h> #include <linux/types.h> +#include <linux/seq_file.h> #include <linux/memblock.h> #include <linux/sizes.h> #include <linux/printk.h>
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chancel Liu chancel.liu@nxp.com
[ Upstream commit fac58baf8fcfcd7481e8f6d60206ce2a47c1476c ]
i.MX rpmsg sound cards work on codec slave mode. MCLK will be disabled by CPU DAI driver in hw_free(). Some codec requires MCLK present at power up/down sequence. So need to set ignore_pmdown_time to power down codec immediately before MCLK is turned off.
Take WM8962 as an example, if MCLK is disabled before DAPM power down playback stream, FIFO error will arise in WM8962 which will have bad impact on playback next.
Signed-off-by: Chancel Liu chancel.liu@nxp.com Acked-by: Shengjiu Wang shengjiu.wang@gmail.com Link: https://lore.kernel.org/r/20230913102656.2966757-1-chancel.liu@nxp.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/fsl/imx-rpmsg.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/sound/soc/fsl/imx-rpmsg.c b/sound/soc/fsl/imx-rpmsg.c index 4d99f4858a14f..76c6febf24990 100644 --- a/sound/soc/fsl/imx-rpmsg.c +++ b/sound/soc/fsl/imx-rpmsg.c @@ -88,6 +88,14 @@ static int imx_rpmsg_probe(struct platform_device *pdev) SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBC_CFC;
+ /* + * i.MX rpmsg sound cards work on codec slave mode. MCLK will be + * disabled by CPU DAI driver in hw_free(). Some codec requires MCLK + * present at power up/down sequence. So need to set ignore_pmdown_time + * to power down codec immediately before MCLK is turned off. + */ + data->dai.ignore_pmdown_time = 1; + /* Optional codec node */ ret = of_parse_phandle_with_fixed_args(np, "audio-codec", 0, 0, &args); if (ret) {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil hverkuil-cisco@xs4all.nl
[ Upstream commit 735de5caf79e06cc9fb96b1b4f4974674ae3e917 ]
The WARN_ONCE was issued also in cases that had nothing to do with VM_IO (e.g. if the start address was just a random value and uaccess fails with -EFAULT).
There are no reports of WARN_ONCE being issued for actual VM_IO cases, so just drop it and instead add a note to the comment before the function.
Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Reviewed-by: David Hildenbrand david@redhat.com Reported-by: Yikebaer Aizezi yikebaer61@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/common/videobuf2/frame_vector.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/common/videobuf2/frame_vector.c b/drivers/media/common/videobuf2/frame_vector.c index 144027035892a..07ebe4424df3a 100644 --- a/drivers/media/common/videobuf2/frame_vector.c +++ b/drivers/media/common/videobuf2/frame_vector.c @@ -30,6 +30,10 @@ * different type underlying the specified range of virtual addresses. * When the function isn't able to map a single page, it returns error. * + * Note that get_vaddr_frames() cannot follow VM_IO mappings. It used + * to be able to do that, but that could (racily) return non-refcounted + * pfns. + * * This function takes care of grabbing mmap_lock as necessary. */ int get_vaddr_frames(unsigned long start, unsigned int nr_frames, @@ -55,8 +59,6 @@ int get_vaddr_frames(unsigned long start, unsigned int nr_frames, if (likely(ret > 0)) return ret;
- /* This used to (racily) return non-refcounted pfns. Let people know */ - WARN_ONCE(1, "get_vaddr_frames() cannot follow VM_IO mapping"); vec->nr_frames = 0; return ret ? ret : -EFAULT; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Olga Kornievskaia kolga@netapp.com
[ Upstream commit 4506f23e117161a20104c8fa04f33e1ca63c26af ]
Currently, if the OPEN compound experiencing an error and needs to get the file attributes separately, it will send a stand alone GETATTR but it would use the filehandle from the results of the OPEN compound. In case of the CLAIM_FH OPEN, nfs_openres's fh is zero value. That generate a GETATTR that's sent with a zero value filehandle, and results in the server returning an error.
Instead, for the CLAIM_FH OPEN, take the filehandle that was used in the PUTFH of the OPEN compound.
Signed-off-by: Olga Kornievskaia kolga@netapp.com Reviewed-by: Benjamin Coddington bcodding@redhat.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/nfs4proc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index acb1346da13e9..be570c65ae154 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2708,8 +2708,12 @@ static int _nfs4_proc_open(struct nfs4_opendata *data, return status; } if (!(o_res->f_attr->valid & NFS_ATTR_FATTR)) { + struct nfs_fh *fh = &o_res->fh; + nfs4_sequence_free_slot(&o_res->seq_res); - nfs4_proc_getattr(server, &o_res->fh, o_res->f_attr, NULL); + if (o_arg->claim == NFS4_OPEN_CLAIM_FH) + fh = NFS_FH(d_inode(data->dentry)); + nfs4_proc_getattr(server, fh, o_res->f_attr, NULL); } return 0; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ranjani Sridharan ranjani.sridharan@linux.intel.com
[ Upstream commit e0f96246c4402514acda040be19ee24c1619e01a ]
20s seems unnecessarily large for the DSP init timeout. This coupled with multiple FW boot attempts causes an excessive delay in the error path when booting in recovery mode. Reduce it to 0.5s and use the existing HDA_DSP_INIT_TIMEOUT_US.
Link: https://github.com/thesofproject/linux/issues/4565 Signed-off-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Reviewed-by: Péter Ujfalusi peter.ujfalusi@linux.intel.com Signed-off-by: Peter Ujfalusi peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230915134153.9688-1-peter.ujfalusi@linux.intel.c... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sof/intel/mtl.c | 2 +- sound/soc/sof/intel/mtl.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/sound/soc/sof/intel/mtl.c b/sound/soc/sof/intel/mtl.c index 10298532816fe..d7048f1d6a048 100644 --- a/sound/soc/sof/intel/mtl.c +++ b/sound/soc/sof/intel/mtl.c @@ -453,7 +453,7 @@ static int mtl_dsp_cl_init(struct snd_sof_dev *sdev, int stream_tag, bool imr_bo /* step 3: wait for IPC DONE bit from ROM */ ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, chip->ipc_ack, status, ((status & chip->ipc_ack_mask) == chip->ipc_ack_mask), - HDA_DSP_REG_POLL_INTERVAL_US, MTL_DSP_PURGE_TIMEOUT_US); + HDA_DSP_REG_POLL_INTERVAL_US, HDA_DSP_INIT_TIMEOUT_US); if (ret < 0) { if (hda->boot_iteration == HDA_FW_BOOT_ATTEMPTS) dev_err(sdev->dev, "timeout waiting for purge IPC done\n"); diff --git a/sound/soc/sof/intel/mtl.h b/sound/soc/sof/intel/mtl.h index 788bf0e3ea879..00e3526889d3d 100644 --- a/sound/soc/sof/intel/mtl.h +++ b/sound/soc/sof/intel/mtl.h @@ -54,7 +54,6 @@ #define MTL_DSP_IRQSTS_IPC BIT(0) #define MTL_DSP_IRQSTS_SDW BIT(6)
-#define MTL_DSP_PURGE_TIMEOUT_US 20000000 /* 20s */ #define MTL_DSP_REG_POLL_INTERVAL_US 10 /* 10 us */
/* Memory windows */
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Gray bgray@linux.ibm.com
[ Upstream commit cc879ab3ce39bc39f9b1d238b283f43a5f6f957d ]
thread_change_pc() uses CPU local data, so must be protected from swapping CPUs while it is reading the breakpoint struct.
The error is more noticeable after 1e60f3564bad ("powerpc/watchpoints: Track perf single step directly on the breakpoint"), which added an unconditional __this_cpu_read() call in thread_change_pc(). However the existing __this_cpu_read() that runs if a breakpoint does need to be re-inserted has the same issue.
Signed-off-by: Benjamin Gray bgray@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://msgid.link/20230829063457.54157-2-bgray@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/hw_breakpoint.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index 8db1a15d7acbe..a72f86c130488 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -505,11 +505,13 @@ void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs) struct arch_hw_breakpoint *info; int i;
+ preempt_disable(); + for (i = 0; i < nr_wp_slots(); i++) { if (unlikely(tsk->thread.last_hit_ubp[i])) goto reset; } - return; + goto out;
reset: regs_set_return_msr(regs, regs->msr & ~MSR_SE); @@ -518,6 +520,9 @@ void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs) __set_breakpoint(i, info); tsk->thread.last_hit_ubp[i] = NULL; } + +out: + preempt_enable(); }
static bool is_larx_stcx_instr(int type)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Gray bgray@linux.ibm.com
[ Upstream commit 3241f260eb830d27d09cc604690ec24533fdb433 ]
This is called in an atomic context, so is not allowed to sleep if a user page needs to be faulted in and has nowhere it can be deferred to. The pagefault_disabled() function is documented as preventing user access methods from sleeping.
In practice the page will be mapped in nearly always because we are reading the instruction that just triggered the watchpoint trap.
Signed-off-by: Benjamin Gray bgray@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://msgid.link/20230829063457.54157-3-bgray@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/hw_breakpoint_constraints.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/hw_breakpoint_constraints.c b/arch/powerpc/kernel/hw_breakpoint_constraints.c index a74623025f3ab..9e51801c49152 100644 --- a/arch/powerpc/kernel/hw_breakpoint_constraints.c +++ b/arch/powerpc/kernel/hw_breakpoint_constraints.c @@ -131,8 +131,13 @@ void wp_get_instr_detail(struct pt_regs *regs, ppc_inst_t *instr, int *type, int *size, unsigned long *ea) { struct instruction_op op; + int err;
- if (__get_user_instr(*instr, (void __user *)regs->nip)) + pagefault_disable(); + err = __get_user_instr(*instr, (void __user *)regs->nip); + pagefault_enable(); + + if (err) return;
analyse_instr(&op, regs, *instr);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Gray bgray@linux.ibm.com
[ Upstream commit 27646b2e02b096a6936b3e3b6ba334ae20763eab ]
It can be easy to miss that the notifier mechanism invokes the callbacks in an atomic context, so add some comments to that effect on the two handlers we register here.
Signed-off-by: Benjamin Gray bgray@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://msgid.link/20230829063457.54157-4-bgray@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/hw_breakpoint.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index a72f86c130488..02436f80e60e2 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -637,6 +637,11 @@ static void handle_p10dd1_spurious_exception(struct arch_hw_breakpoint **info, } }
+/* + * Handle a DABR or DAWR exception. + * + * Called in atomic context. + */ int hw_breakpoint_handler(struct die_args *args) { bool err = false; @@ -763,6 +768,8 @@ NOKPROBE_SYMBOL(hw_breakpoint_handler);
/* * Handle single-step exceptions following a DABR hit. + * + * Called in atomic context. */ static int single_step_dabr_instruction(struct die_args *args) { @@ -820,6 +827,8 @@ NOKPROBE_SYMBOL(single_step_dabr_instruction);
/* * Handle debug exception notifications. + * + * Called in atomic context. */ int hw_breakpoint_exceptions_notify( struct notifier_block *unused, unsigned long val, void *data)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johnathan Mantey johnathanx.mantey@intel.com
[ Upstream commit 3780bb29311eccb7a1c9641032a112eed237f7e3 ]
Report the carrier/no-carrier state for the network interface shared between the BMC and the passthrough channel. Without this functionality the BMC is unable to reconfigure the NIC in the event of a re-cabling to a different subnet.
Signed-off-by: Johnathan Mantey johnathanx.mantey@intel.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ncsi/ncsi-aen.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c index 62fb1031763d1..f8854bff286cb 100644 --- a/net/ncsi/ncsi-aen.c +++ b/net/ncsi/ncsi-aen.c @@ -89,6 +89,11 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp, if ((had_link == has_link) || chained) return 0;
+ if (had_link) + netif_carrier_off(ndp->ndev.dev); + else + netif_carrier_on(ndp->ndev.dev); + if (!ndp->multi_package && !nc->package->multi_channel) { if (had_link) { ndp->flags |= NCSI_DEV_RESHUFFLE;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Andrzej Siewior bigeasy@linutronix.de
[ Upstream commit fbd825fcd7dd4c11d4c48c3d0adc248a4a0ce90b ]
Struct hsr_sup_tlv describes HW layout and therefore it needs a __packed attribute to ensure the compiler does not add any padding. Due to the size and __packed attribute of the structs that use hsr_sup_tlv it has no functional impact.
Add __packed to struct hsr_sup_tlv.
Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/hsr/hsr_main.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/hsr/hsr_main.h b/net/hsr/hsr_main.h index 16ae9fb09ccd2..58a5a8b3891ff 100644 --- a/net/hsr/hsr_main.h +++ b/net/hsr/hsr_main.h @@ -83,7 +83,7 @@ struct hsr_vlan_ethhdr { struct hsr_sup_tlv { u8 HSR_TLV_type; u8 HSR_TLV_length; -}; +} __packed;
/* HSR/PRP Supervision Frame data types. * Field names as defined in the IEC:2010 standard for HSR.
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gerhard Engleder gerhard@engleder-embedded.com
[ Upstream commit ea852c17f5382a0a52041cfbd9a4451ae0fa1a38 ]
According to the NAPI documentation networking/napi.rst, drivers which have to mask interrupts explicitly should use the napi_schedule_prep() and __napi_schedule() calls.
No problem seen so far with current implementation. Nevertheless, let's align the implementation with documentation.
Signed-off-by: Gerhard Engleder gerhard@engleder-embedded.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/engleder/tsnep_main.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/engleder/tsnep_main.c b/drivers/net/ethernet/engleder/tsnep_main.c index 6bf3cc11d2121..00436a6f785e8 100644 --- a/drivers/net/ethernet/engleder/tsnep_main.c +++ b/drivers/net/ethernet/engleder/tsnep_main.c @@ -65,8 +65,11 @@ static irqreturn_t tsnep_irq(int irq, void *arg)
/* handle TX/RX queue 0 interrupt */ if ((active & adapter->queue[0].irq_mask) != 0) { - tsnep_disable_irq(adapter, adapter->queue[0].irq_mask); - napi_schedule(&adapter->queue[0].napi); + if (napi_schedule_prep(&adapter->queue[0].napi)) { + tsnep_disable_irq(adapter, adapter->queue[0].irq_mask); + /* schedule after masking to avoid races */ + __napi_schedule(&adapter->queue[0].napi); + } }
return IRQ_HANDLED; @@ -77,8 +80,11 @@ static irqreturn_t tsnep_irq_txrx(int irq, void *arg) struct tsnep_queue *queue = arg;
/* handle TX/RX queue interrupt */ - tsnep_disable_irq(queue->adapter, queue->irq_mask); - napi_schedule(&queue->napi); + if (napi_schedule_prep(&queue->napi)) { + tsnep_disable_irq(queue->adapter, queue->irq_mask); + /* schedule after masking to avoid races */ + __napi_schedule(&queue->napi); + }
return IRQ_HANDLED; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gerhard Engleder gerhard@engleder-embedded.com
[ Upstream commit 46589db3817bd8b523701274885984b5a5dda7d1 ]
According to the NAPI documentation networking/napi.rst, Rx specific APIs like page pool and XDP cannot be used at all when budget is 0. skb Tx processing should happen regardless of the budget.
Stop NAPI polling after Tx processing and skip Rx processing if budget is 0.
Signed-off-by: Gerhard Engleder gerhard@engleder-embedded.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/engleder/tsnep_main.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/engleder/tsnep_main.c b/drivers/net/ethernet/engleder/tsnep_main.c index 00436a6f785e8..2be518db04270 100644 --- a/drivers/net/ethernet/engleder/tsnep_main.c +++ b/drivers/net/ethernet/engleder/tsnep_main.c @@ -930,6 +930,10 @@ static int tsnep_poll(struct napi_struct *napi, int budget) if (queue->tx) complete = tsnep_tx_poll(queue->tx, budget);
+ /* handle case where we are called by netpoll with a budget of 0 */ + if (unlikely(budget <= 0)) + return budget; + if (queue->rx) { done = tsnep_rx_poll(queue->rx, napi, budget); if (done >= budget)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huacai Chen chenhuacai@loongson.cn
[ Upstream commit b795fb9f5861ee256070d59e33130980a01fadd7 ]
After commit 61167ad5fecdea ("mm: pass nid to reserve_bootmem_region()") we get a panic if DEFERRED_STRUCT_PAGE_INIT is enabled:
[ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000002b82, era == 90000000040e3f28, ra == 90000000040e3f18 [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0+ #733 [ 0.000000] pc 90000000040e3f28 ra 90000000040e3f18 tp 90000000046f4000 sp 90000000046f7c90 [ 0.000000] a0 0000000000000001 a1 0000000000200000 a2 0000000000000040 a3 90000000046f7ca0 [ 0.000000] a4 90000000046f7ca4 a5 0000000000000000 a6 90000000046f7c38 a7 0000000000000000 [ 0.000000] t0 0000000000000002 t1 9000000004b00ac8 t2 90000000040e3f18 t3 90000000040f0800 [ 0.000000] t4 00000000000f0000 t5 80000000ffffe07e t6 0000000000000003 t7 900000047fff5e20 [ 0.000000] t8 aaaaaaaaaaaaaaab u0 0000000000000018 s9 0000000000000000 s0 fffffefffe000000 [ 0.000000] s1 0000000000000000 s2 0000000000000080 s3 0000000000000040 s4 0000000000000000 [ 0.000000] s5 0000000000000000 s6 fffffefffe000000 s7 900000000470b740 s8 9000000004ad4000 [ 0.000000] ra: 90000000040e3f18 reserve_bootmem_region+0xec/0x21c [ 0.000000] ERA: 90000000040e3f28 reserve_bootmem_region+0xfc/0x21c [ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE) [ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 0.000000] ECFG: 00070800 (LIE=11 VS=7) [ 0.000000] ESTAT: 00010800 [PIL] (IS=11 ECode=1 EsubCode=0) [ 0.000000] BADV: 0000000000002b82 [ 0.000000] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____)) [ 0.000000] Stack : 0000000000000000 9000000002eb5430 0000003a00000020 90000000045ccd00 [ 0.000000] 900000000470e000 90000000002c1918 0000000000000000 9000000004110780 [ 0.000000] 00000000fe6c0000 0000000480000000 9000000004b4e368 9000000004110748 [ 0.000000] 0000000000000000 900000000421ca84 9000000004620000 9000000004564970 [ 0.000000] 90000000046f7d78 9000000002cc9f70 90000000002c1918 900000000470e000 [ 0.000000] 9000000004564970 90000000040bc0e0 90000000046f7d78 0000000000000000 [ 0.000000] 0000000000004000 90000000045ccd00 0000000000000000 90000000002c1918 [ 0.000000] 90000000002c1900 900000000470b700 9000000004b4df78 9000000004620000 [ 0.000000] 90000000046200a8 90000000046200a8 0000000000000000 9000000004218b2c [ 0.000000] 9000000004270008 0000000000000001 0000000000000000 90000000045ccd00 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<90000000040e3f28>] reserve_bootmem_region+0xfc/0x21c [ 0.000000] [<900000000421ca84>] memblock_free_all+0x114/0x350 [ 0.000000] [<9000000004218b2c>] mm_core_init+0x138/0x3cc [ 0.000000] [<9000000004200e38>] start_kernel+0x488/0x7a4 [ 0.000000] [<90000000040df0d8>] kernel_entry+0xd8/0xdc [ 0.000000] [ 0.000000] Code: 02eb21ad 00410f4c 380c31ac <262b818d> 6800b70d 02c1c196 0015001c 57fe4bb1 260002cd
The reason is early memblock_reserve() in memblock_init() set node id to MAX_NUMNODES, making NODE_DATA(nid) a NULL dereference in the call chain reserve_bootmem_region() -> init_reserved_page(). After memblock_init(), those late calls of memblock_reserve() operate on subregions of memblock .memory regions. As a result, these reserved regions will be set to the correct node at the first iteration of memmap_init_reserved_pages().
So set all reserved memblocks on Node#0 at initialization can avoid this panic.
Reported-by: WANG Xuerui git@xen0n.name Tested-by: WANG Xuerui git@xen0n.name Reviewed-by: WANG Xuerui git@xen0n.name # with nits addressed Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Sasha Levin sashal@kernel.org --- arch/loongarch/kernel/mem.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/loongarch/kernel/mem.c b/arch/loongarch/kernel/mem.c index 4a4107a6a9651..aed901c57fb43 100644 --- a/arch/loongarch/kernel/mem.c +++ b/arch/loongarch/kernel/mem.c @@ -50,7 +50,6 @@ void __init memblock_init(void) }
memblock_set_current_limit(PFN_PHYS(max_low_pfn)); - memblock_set_node(0, PHYS_ADDR_MAX, &memblock.memory, 0);
/* Reserve the first 2MB */ memblock_reserve(PHYS_OFFSET, 0x200000); @@ -58,4 +57,7 @@ void __init memblock_init(void) /* Reserve the kernel text/data/bss */ memblock_reserve(__pa_symbol(&_text), __pa_symbol(&_end) - __pa_symbol(&_text)); + + memblock_set_node(0, PHYS_ADDR_MAX, &memblock.memory, 0); + memblock_set_node(0, PHYS_ADDR_MAX, &memblock.reserved, 0); }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Zimmermann tzimmermann@suse.de
[ Upstream commit f75f71b2c418a27a7c05139bb27a0c83adf88d19 ]
Fix linker error if FB=m about missing fb_io_read and fb_io_write. The linker's error message suggests that this config setting has already been broken for other symbols.
All errors (new ones prefixed by >>):
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_probe': sh7760fb.c:(.text+0x374): undefined reference to `framebuffer_alloc' sh4-linux-ld: sh7760fb.c:(.text+0x394): undefined reference to `fb_videomode_to_var' sh4-linux-ld: sh7760fb.c:(.text+0x39c): undefined reference to `fb_alloc_cmap' sh4-linux-ld: sh7760fb.c:(.text+0x3a4): undefined reference to `register_framebuffer' sh4-linux-ld: sh7760fb.c:(.text+0x3ac): undefined reference to `fb_dealloc_cmap' sh4-linux-ld: sh7760fb.c:(.text+0x434): undefined reference to `framebuffer_release' sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_remove': sh7760fb.c:(.text+0x800): undefined reference to `unregister_framebuffer' sh4-linux-ld: sh7760fb.c:(.text+0x804): undefined reference to `fb_dealloc_cmap' sh4-linux-ld: sh7760fb.c:(.text+0x814): undefined reference to `framebuffer_release'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0xc): undefined reference to `fb_io_read' sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x10): undefined reference to `fb_io_write'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x2c): undefined reference to `cfb_fillrect' sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x30): undefined reference to `cfb_copyarea' sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x34): undefined reference to `cfb_imageblit'
Suggested-by: Randy Dunlap rdunlap@infradead.org Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202309130632.LS04CPWu-lkp@intel.com/ Signed-off-by: Thomas Zimmermann tzimmermann@suse.de Reviewed-by: Javier Martinez Canillas javierm@redhat.com Acked-by: John Paul Adrian Glaubitz glaubitz@physik.fu-berlin.de Link: https://patchwork.freedesktop.org/patch/msgid/20230918090400.13264-1-tzimmer... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index 974e862cd20d6..ff95f19224901 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -2015,7 +2015,7 @@ config FB_COBALT
config FB_SH7760 bool "SH7760/SH7763/SH7720/SH7721 LCDC support" - depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \ + depends on FB=y && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \ || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721) select FB_CFB_FILLRECT select FB_CFB_COPYAREA
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnaldo Carvalho de Melo acme@redhat.com
[ Upstream commit 88cc47e24597971b05b6e94c28a2fc81d2a8d61a ]
YYNOMEM was introduced in bison 3.81, so define it as YYABORT for older versions, which should provide the previous perf behaviour.
Cc: Adrian Hunter adrian.hunter@intel.com Cc: Ian Rogers irogers@google.com Cc: Jiri Olsa jolsa@kernel.org Cc: Namhyung Kim namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/Build | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/tools/perf/util/Build b/tools/perf/util/Build index e315ecaec3233..2c364a9087a22 100644 --- a/tools/perf/util/Build +++ b/tools/perf/util/Build @@ -276,6 +276,12 @@ ifeq ($(BISON_GE_35),1) else bison_flags += -w endif + +BISON_LT_381 := $(shell expr $(shell $(BISON) --version | grep bison | sed -e 's/.+ ([0-9]+).([0-9]+).([0-9]+)/\1\2\3/g') < 381) +ifeq ($(BISON_LT_381),1) + bison_flags += -DYYNOMEM=YYABORT +endif + CFLAGS_parse-events-bison.o += $(bison_flags) CFLAGS_pmu-bison.o += -DYYLTYPE_IS_TRIVIAL=0 $(bison_flags) CFLAGS_expr-bison.o += -DYYLTYPE_IS_TRIVIAL=0 $(bison_flags)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Hellwig hch@lst.de
[ Upstream commit 081a7d958ce4b65f9aab6e70e65b0b2e0b92297c ]
Add a helper to create the iod mempool.
Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: Keith Busch kbusch@kernel.org Reviewed-by: Sagi Grimberg sagi@grimberg.me Reviewed-by: Chaitanya Kulkarni kch@nvidia.com Tested-by Gerd Bayer gbayer@linxu.ibm.com Stable-dep-of: dad651b2a44e ("nvme-pci: do not set the NUMA node of device if it has none") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 41 ++++++++++++++++++----------------------- 1 file changed, 18 insertions(+), 23 deletions(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index b30269f5e68fb..6ab532ca77223 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -392,14 +392,6 @@ static int nvme_pci_npages_sgl(void) NVME_CTRL_PAGE_SIZE); }
-static size_t nvme_pci_iod_alloc_size(void) -{ - size_t npages = max(nvme_pci_npages_prp(), nvme_pci_npages_sgl()); - - return sizeof(__le64 *) * npages + - sizeof(struct scatterlist) * NVME_MAX_SEGS; -} - static int nvme_admin_init_hctx(struct blk_mq_hw_ctx *hctx, void *data, unsigned int hctx_idx) { @@ -2775,6 +2767,22 @@ static void nvme_release_prp_pools(struct nvme_dev *dev) dma_pool_destroy(dev->prp_small_pool); }
+static int nvme_pci_alloc_iod_mempool(struct nvme_dev *dev) +{ + size_t npages = max(nvme_pci_npages_prp(), nvme_pci_npages_sgl()); + size_t alloc_size = sizeof(__le64 *) * npages + + sizeof(struct scatterlist) * NVME_MAX_SEGS; + + WARN_ON_ONCE(alloc_size > PAGE_SIZE); + dev->iod_mempool = mempool_create_node(1, + mempool_kmalloc, mempool_kfree, + (void *)alloc_size, GFP_KERNEL, + dev_to_node(dev->dev)); + if (!dev->iod_mempool) + return -ENOMEM; + return 0; +} + static void nvme_free_tagset(struct nvme_dev *dev) { if (dev->tagset.tags) @@ -3103,7 +3111,6 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) int node, result = -ENOMEM; struct nvme_dev *dev; unsigned long quirks = id->driver_data; - size_t alloc_size;
node = dev_to_node(&pdev->dev); if (node == NUMA_NO_NODE) @@ -3148,21 +3155,9 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) quirks |= NVME_QUIRK_SIMPLE_SUSPEND; }
- /* - * Double check that our mempool alloc size will cover the biggest - * command we support. - */ - alloc_size = nvme_pci_iod_alloc_size(); - WARN_ON_ONCE(alloc_size > PAGE_SIZE); - - dev->iod_mempool = mempool_create_node(1, mempool_kmalloc, - mempool_kfree, - (void *) alloc_size, - GFP_KERNEL, node); - if (!dev->iod_mempool) { - result = -ENOMEM; + result = nvme_pci_alloc_iod_mempool(dev); + if (result) goto release_pools; - }
result = nvme_init_ctrl(&dev->ctrl, &pdev->dev, &nvme_pci_ctrl_ops, quirks);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Hellwig hch@lst.de
[ Upstream commit 2e87570be9d2746e7c4e7ab1cc18fd3ca7de2768 ]
Add a helper that allocates the nvme_dev structure up to the point where we can call nvme_init_ctrl. This pairs with the free_ctrl method and can thus be used to cleanup the teardown path and make it more symmetric.
Note that this now calls nvme_init_ctrl a lot earlier during probing, which also means the per-controller character device shows up earlier. Due to the controller state no commnds can be send on it, but it might make sense to delay the cdev registration until nvme_init_ctrl_finish.
Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: Keith Busch kbusch@kernel.org Reviewed-by: Sagi Grimberg sagi@grimberg.me Reviewed-by: Chaitanya Kulkarni kch@nvidia.com Tested-by Gerd Bayer gbayer@linxu.ibm.com Stable-dep-of: dad651b2a44e ("nvme-pci: do not set the NUMA node of device if it has none") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 81 +++++++++++++++++++++++------------------ 1 file changed, 46 insertions(+), 35 deletions(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 6ab532ca77223..42e85b1bf6591 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2790,6 +2790,7 @@ static void nvme_free_tagset(struct nvme_dev *dev) dev->ctrl.tagset = NULL; }
+/* pairs with nvme_pci_alloc_dev */ static void nvme_pci_free_ctrl(struct nvme_ctrl *ctrl) { struct nvme_dev *dev = to_nvme_dev(ctrl); @@ -3106,19 +3107,23 @@ static void nvme_async_probe(void *data, async_cookie_t cookie) nvme_put_ctrl(&dev->ctrl); }
-static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) +static struct nvme_dev *nvme_pci_alloc_dev(struct pci_dev *pdev, + const struct pci_device_id *id) { - int node, result = -ENOMEM; - struct nvme_dev *dev; unsigned long quirks = id->driver_data; + int node = dev_to_node(&pdev->dev); + struct nvme_dev *dev; + int ret = -ENOMEM;
- node = dev_to_node(&pdev->dev); if (node == NUMA_NO_NODE) set_dev_node(&pdev->dev, first_memory_node);
dev = kzalloc_node(sizeof(*dev), GFP_KERNEL, node); if (!dev) - return -ENOMEM; + return NULL; + INIT_WORK(&dev->ctrl.reset_work, nvme_reset_work); + INIT_WORK(&dev->remove_work, nvme_remove_dead_ctrl_work); + mutex_init(&dev->shutdown_lock);
dev->nr_write_queues = write_queues; dev->nr_poll_queues = poll_queues; @@ -3126,25 +3131,11 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) dev->queues = kcalloc_node(dev->nr_allocated_queues, sizeof(struct nvme_queue), GFP_KERNEL, node); if (!dev->queues) - goto free; + goto out_free_dev;
dev->dev = get_device(&pdev->dev); - pci_set_drvdata(pdev, dev); - - result = nvme_dev_map(dev); - if (result) - goto put_pci; - - INIT_WORK(&dev->ctrl.reset_work, nvme_reset_work); - INIT_WORK(&dev->remove_work, nvme_remove_dead_ctrl_work); - mutex_init(&dev->shutdown_lock); - - result = nvme_setup_prp_pools(dev); - if (result) - goto unmap;
quirks |= check_vendor_combination_bug(pdev); - if (!noacpi && acpi_storage_d3(&pdev->dev)) { /* * Some systems use a bios work around to ask for D3 on @@ -3154,34 +3145,54 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) "platform quirk: setting simple suspend\n"); quirks |= NVME_QUIRK_SIMPLE_SUSPEND; } + ret = nvme_init_ctrl(&dev->ctrl, &pdev->dev, &nvme_pci_ctrl_ops, + quirks); + if (ret) + goto out_put_device; + return dev;
- result = nvme_pci_alloc_iod_mempool(dev); +out_put_device: + put_device(dev->dev); + kfree(dev->queues); +out_free_dev: + kfree(dev); + return ERR_PTR(ret); +} + +static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct nvme_dev *dev; + int result = -ENOMEM; + + dev = nvme_pci_alloc_dev(pdev, id); + if (!dev) + return -ENOMEM; + + result = nvme_dev_map(dev); if (result) - goto release_pools; + goto out_uninit_ctrl;
- result = nvme_init_ctrl(&dev->ctrl, &pdev->dev, &nvme_pci_ctrl_ops, - quirks); + result = nvme_setup_prp_pools(dev); + if (result) + goto out_dev_unmap; + + result = nvme_pci_alloc_iod_mempool(dev); if (result) - goto release_mempool; + goto out_release_prp_pools;
dev_info(dev->ctrl.device, "pci function %s\n", dev_name(&pdev->dev)); + pci_set_drvdata(pdev, dev);
nvme_reset_ctrl(&dev->ctrl); async_schedule(nvme_async_probe, dev); - return 0;
- release_mempool: - mempool_destroy(dev->iod_mempool); - release_pools: +out_release_prp_pools: nvme_release_prp_pools(dev); - unmap: +out_dev_unmap: nvme_dev_unmap(dev); - put_pci: - put_device(dev->dev); - free: - kfree(dev->queues); - kfree(dev); +out_uninit_ctrl: + nvme_uninit_ctrl(&dev->ctrl); return result; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pratyush Yadav ptyadav@amazon.de
[ Upstream commit dad651b2a44eb6b201738f810254279dca29d30d ]
If a device has no NUMA node information associated with it, the driver puts the device in node first_memory_node (say node 0). Not having a NUMA node and being associated with node 0 are completely different things and it makes little sense to mix the two.
Signed-off-by: Pratyush Yadav ptyadav@amazon.de Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 3 --- 1 file changed, 3 deletions(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 42e85b1bf6591..f28f50ea273a9 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3115,9 +3115,6 @@ static struct nvme_dev *nvme_pci_alloc_dev(struct pci_dev *pdev, struct nvme_dev *dev; int ret = -ENOMEM;
- if (node == NUMA_NO_NODE) - set_dev_node(&pdev->dev, first_memory_node); - dev = kzalloc_node(sizeof(*dev), GFP_KERNEL, node); if (!dev) return NULL;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sven Eckelmann sven@narfation.org
[ Upstream commit 400ece6c7f346b0a30867bd00b03b5b2563d4357 ]
When a station idles for a long time, hostapd will try to send a QoS Null frame to the station as "poll". NL80211_CMD_PROBE_CLIENT is used for this purpose. And the skb will be added to ack_status_frame - waiting for a completion via ieee80211_report_ack_skb().
But when the peer was already removed before the tx_complete arrives, the peer will be missing. And when using dev_kfree_skb_any (instead of going through mac80211), the entry will stay inside ack_status_frames. This IDR will therefore run full after 8K request were generated for such clients. At this point, the access point will then just stall and not allow any new clients because idr_alloc() for ack_status_frame will fail.
ieee80211_free_txskb() on the other hand will (when required) call ieee80211_report_ack_skb() and make sure that (when required) remove the entry from the ack_status_frame.
Tested-on: IPQ6018 hw1.0 WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Fixes: 6257c702264c ("wifi: ath11k: fix tx status reporting in encap offload mode") Fixes: 94739d45c388 ("ath11k: switch to using ieee80211_tx_status_ext()") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-1-c0af729d6229@... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath11k/dp_tx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c index 64c8ccac22d27..cd24488612454 100644 --- a/drivers/net/wireless/ath/ath11k/dp_tx.c +++ b/drivers/net/wireless/ath/ath11k/dp_tx.c @@ -369,7 +369,7 @@ ath11k_dp_tx_htt_tx_complete_buf(struct ath11k_base *ab, "dp_tx: failed to find the peer with peer_id %d\n", ts->peer_id); spin_unlock_bh(&ab->base_lock); - dev_kfree_skb_any(msdu); + ieee80211_free_txskb(ar->hw, msdu); return; } spin_unlock_bh(&ab->base_lock); @@ -624,7 +624,7 @@ static void ath11k_dp_tx_complete_msdu(struct ath11k *ar, "dp_tx: failed to find the peer with peer_id %d\n", ts->peer_id); spin_unlock_bh(&ab->base_lock); - dev_kfree_skb_any(msdu); + ieee80211_free_txskb(ar->hw, msdu); return; } arsta = (struct ath11k_sta *)peer->sta->drv_priv;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gleb Chesnokov gleb.chesnokov@scst.dev
[ Upstream commit d54820b22e404b06b2b65877ff802cc7b31688bc ]
When target mode is enabled, the pci_irq_get_affinity() function may return a NULL value in qla_mapq_init_qp_cpu_map() due to the qla24xx_enable_msix() code that handles IRQ settings for target mode. This leads to a crash due to a NULL pointer dereference.
This patch fixes the issue by adding a check for the NULL value returned by pci_irq_get_affinity() and introducing a 'cpu_mapped' boolean flag to the qla_qpair structure, ensuring that the qpair's CPU affinity is updated when it has not been mapped to a CPU.
Fixes: 1d201c81d4cc ("scsi: qla2xxx: Select qpair depending on which CPU post_cmd() gets called") Signed-off-by: Gleb Chesnokov gleb.chesnokov@scst.dev Link: https://lore.kernel.org/r/56b416f2-4e0f-b6cf-d6d5-b7c372e3c6a2@scst.dev Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_def.h | 1 + drivers/scsi/qla2xxx/qla_init.c | 3 +++ drivers/scsi/qla2xxx/qla_inline.h | 3 +++ drivers/scsi/qla2xxx/qla_isr.c | 3 +++ 4 files changed, 10 insertions(+)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 817efdd32ad63..1713588f671f3 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -3805,6 +3805,7 @@ struct qla_qpair { uint64_t retry_term_jiff; struct qla_tgt_counters tgt_counters; uint16_t cpuid; + bool cpu_mapped; struct qla_fw_resources fwres ____cacheline_aligned; u32 cmd_cnt; u32 cmd_completion_cnt; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 79de31e7e8b2a..884ed77259f85 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -9759,6 +9759,9 @@ struct qla_qpair *qla2xxx_create_qpair(struct scsi_qla_host *vha, int qos, qpair->rsp->req = qpair->req; qpair->rsp->qpair = qpair;
+ if (!qpair->cpu_mapped) + qla_cpu_update(qpair, raw_smp_processor_id()); + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) { if (ha->fw_attributes & BIT_4) qpair->difdix_supported = 1; diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index e66441355f7ae..a4a56ab0ba747 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -597,11 +597,14 @@ qla_mapq_init_qp_cpu_map(struct qla_hw_data *ha, if (!ha->qp_cpu_map) return; mask = pci_irq_get_affinity(ha->pdev, msix->vector_base0); + if (!mask) + return; qpair->cpuid = cpumask_first(mask); for_each_cpu(cpu, mask) { ha->qp_cpu_map[cpu] = qpair; } msix->cpuid = qpair->cpuid; + qpair->cpu_mapped = true; }
static inline void diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index cf1025c917267..db65dbab3a9fa 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -3819,6 +3819,9 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha,
if (rsp->qpair->cpuid != raw_smp_processor_id() || !rsp->qpair->rcv_intr) { rsp->qpair->rcv_intr = 1; + + if (!rsp->qpair->cpu_mapped) + qla_cpu_update(rsp->qpair, raw_smp_processor_id()); }
#define __update_rsp_in(_is_shadow_hba, _rsp, _rsp_in) \
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Irvin Cote irvin.cote@insa-lyon.fr
[ Upstream commit dc785d69d753a3894c93afc23b91404652382ead ]
Don't mix NULL and ERR_PTR returns.
Fixes: 2e87570be9d2 ("nvme-pci: factor out a nvme_pci_alloc_dev helper") Signed-off-by: Irvin Cote irvin.cote@insa-lyon.fr Reviewed-by: Keith Busch kbusch@kernel.org Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index f28f50ea273a9..64990a2cfd0a7 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3117,7 +3117,7 @@ static struct nvme_dev *nvme_pci_alloc_dev(struct pci_dev *pdev,
dev = kzalloc_node(sizeof(*dev), GFP_KERNEL, node); if (!dev) - return NULL; + return ERR_PTR(-ENOMEM); INIT_WORK(&dev->ctrl.reset_work, nvme_reset_work); INIT_WORK(&dev->remove_work, nvme_remove_dead_ctrl_work); mutex_init(&dev->shutdown_lock); @@ -3162,8 +3162,8 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) int result = -ENOMEM;
dev = nvme_pci_alloc_dev(pdev, id); - if (!dev) - return -ENOMEM; + if (IS_ERR(dev)) + return PTR_ERR(dev);
result = nvme_dev_map(dev); if (result)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roberto Sassu roberto.sassu@huawei.com
[ Upstream commit 2c085f3a8f23c9b444e8b99d93c15d7ce870fc4e ]
smack_dentry_create_files_as() determines whether transmuting should occur based on the label of the parent directory the new inode will be added to, and not the label of the directory where it is created.
This helps for example to do transmuting on overlayfs, since the latter first creates the inode in the working directory, and then moves it to the correct destination.
However, despite smack_dentry_create_files_as() provides the correct label, smack_inode_init_security() does not know from passed information whether or not transmuting occurred. Without this information, smack_inode_init_security() cannot set SMK_INODE_CHANGED in smk_flags, which will result in the SMACK64TRANSMUTE xattr not being set in smack_d_instantiate().
Thus, add the smk_transmuted field to the task_smack structure, and set it in smack_dentry_create_files_as() to smk_task if transmuting occurred. If smk_task is equal to smk_transmuted in smack_inode_init_security(), act as if transmuting was successful but without taking the label from the parent directory (the inode label was already set correctly from the current credentials in smack_inode_alloc_security()).
Signed-off-by: Roberto Sassu roberto.sassu@huawei.com Signed-off-by: Casey Schaufler casey@schaufler-ca.com Signed-off-by: Sasha Levin sashal@kernel.org --- security/smack/smack.h | 1 + security/smack/smack_lsm.c | 41 +++++++++++++++++++++++++++----------- 2 files changed, 30 insertions(+), 12 deletions(-)
diff --git a/security/smack/smack.h b/security/smack/smack.h index e2239be7bd60a..aa15ff56ed6e7 100644 --- a/security/smack/smack.h +++ b/security/smack/smack.h @@ -120,6 +120,7 @@ struct inode_smack { struct task_smack { struct smack_known *smk_task; /* label for access control */ struct smack_known *smk_forked; /* label when forked */ + struct smack_known *smk_transmuted;/* label when transmuted */ struct list_head smk_rules; /* per task access rules */ struct mutex smk_rules_lock; /* lock for the rules */ struct list_head smk_relabel; /* transit allowed labels */ diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index 67dcd31cd3f3d..1232c1d71d9f8 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -999,8 +999,9 @@ static int smack_inode_init_security(struct inode *inode, struct inode *dir, const struct qstr *qstr, const char **name, void **value, size_t *len) { + struct task_smack *tsp = smack_cred(current_cred()); struct inode_smack *issp = smack_inode(inode); - struct smack_known *skp = smk_of_current(); + struct smack_known *skp = smk_of_task(tsp); struct smack_known *isp = smk_of_inode(inode); struct smack_known *dsp = smk_of_inode(dir); int may; @@ -1009,20 +1010,34 @@ static int smack_inode_init_security(struct inode *inode, struct inode *dir, *name = XATTR_SMACK_SUFFIX;
if (value && len) { - rcu_read_lock(); - may = smk_access_entry(skp->smk_known, dsp->smk_known, - &skp->smk_rules); - rcu_read_unlock(); + /* + * If equal, transmuting already occurred in + * smack_dentry_create_files_as(). No need to check again. + */ + if (tsp->smk_task != tsp->smk_transmuted) { + rcu_read_lock(); + may = smk_access_entry(skp->smk_known, dsp->smk_known, + &skp->smk_rules); + rcu_read_unlock(); + }
/* - * If the access rule allows transmutation and - * the directory requests transmutation then - * by all means transmute. + * In addition to having smk_task equal to smk_transmuted, + * if the access rule allows transmutation and the directory + * requests transmutation then by all means transmute. * Mark the inode as changed. */ - if (may > 0 && ((may & MAY_TRANSMUTE) != 0) && - smk_inode_transmutable(dir)) { - isp = dsp; + if ((tsp->smk_task == tsp->smk_transmuted) || + (may > 0 && ((may & MAY_TRANSMUTE) != 0) && + smk_inode_transmutable(dir))) { + /* + * The caller of smack_dentry_create_files_as() + * should have overridden the current cred, so the + * inode label was already set correctly in + * smack_inode_alloc_security(). + */ + if (tsp->smk_task != tsp->smk_transmuted) + isp = dsp; issp->smk_flags |= SMK_INODE_CHANGED; }
@@ -4750,8 +4765,10 @@ static int smack_dentry_create_files_as(struct dentry *dentry, int mode, * providing access is transmuting use the containing * directory label instead of the process label. */ - if (may > 0 && (may & MAY_TRANSMUTE)) + if (may > 0 && (may & MAY_TRANSMUTE)) { ntsp->smk_task = isp->smk_inode; + ntsp->smk_transmuted = ntsp->smk_task; + } } return 0; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roberto Sassu roberto.sassu@huawei.com
[ Upstream commit 3a3d8fce31a49363cc31880dce5e3b0617c9c38b ]
Enhance smack_inode_getsecurity() to retrieve the value for SMACK64TRANSMUTE from the inode security blob, similarly to SMACK64.
This helps to display accurate values in the situation where the security labels come from mount options and not from xattrs.
Signed-off-by: Roberto Sassu roberto.sassu@huawei.com Signed-off-by: Casey Schaufler casey@schaufler-ca.com Signed-off-by: Sasha Levin sashal@kernel.org --- security/smack/smack_lsm.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-)
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index 1232c1d71d9f8..cd6a03e945eb7 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -1476,10 +1476,19 @@ static int smack_inode_getsecurity(struct user_namespace *mnt_userns, struct super_block *sbp; struct inode *ip = (struct inode *)inode; struct smack_known *isp; + struct inode_smack *ispp; + size_t label_len; + char *label = NULL;
- if (strcmp(name, XATTR_SMACK_SUFFIX) == 0) + if (strcmp(name, XATTR_SMACK_SUFFIX) == 0) { isp = smk_of_inode(inode); - else { + } else if (strcmp(name, XATTR_SMACK_TRANSMUTE) == 0) { + ispp = smack_inode(inode); + if (ispp->smk_flags & SMK_INODE_TRANSMUTE) + label = TRANS_TRUE; + else + label = ""; + } else { /* * The rest of the Smack xattrs are only on sockets. */ @@ -1501,13 +1510,18 @@ static int smack_inode_getsecurity(struct user_namespace *mnt_userns, return -EOPNOTSUPP; }
+ if (!label) + label = isp->smk_known; + + label_len = strlen(label); + if (alloc) { - *buffer = kstrdup(isp->smk_known, GFP_KERNEL); + *buffer = kstrdup(label, GFP_KERNEL); if (*buffer == NULL) return -ENOMEM; }
- return strlen(isp->smk_known); + return label_len; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolin Chen nicolinc@nvidia.com
commit d5afb4b47e13161b3f33904d45110f9e6463bad6 upstream.
When running an SVA case, the following soft lockup is triggered: -------------------------------------------------------------------- watchdog: BUG: soft lockup - CPU#244 stuck for 26s! pstate: 83400009 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : arm_smmu_cmdq_issue_cmdlist+0x178/0xa50 lr : arm_smmu_cmdq_issue_cmdlist+0x150/0xa50 sp : ffff8000d83ef290 x29: ffff8000d83ef290 x28: 000000003b9aca00 x27: 0000000000000000 x26: ffff8000d83ef3c0 x25: da86c0812194a0e8 x24: 0000000000000000 x23: 0000000000000040 x22: ffff8000d83ef340 x21: ffff0000c63980c0 x20: 0000000000000001 x19: ffff0000c6398080 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffff3000b4a3bbb0 x14: ffff3000b4a30888 x13: ffff3000b4a3cf60 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc08120e4d6bc x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000048cfa x5 : 0000000000000000 x4 : 0000000000000001 x3 : 000000000000000a x2 : 0000000080000000 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: arm_smmu_cmdq_issue_cmdlist+0x178/0xa50 __arm_smmu_tlb_inv_range+0x118/0x254 arm_smmu_tlb_inv_range_asid+0x6c/0x130 arm_smmu_mm_invalidate_range+0xa0/0xa4 __mmu_notifier_invalidate_range_end+0x88/0x120 unmap_vmas+0x194/0x1e0 unmap_region+0xb4/0x144 do_mas_align_munmap+0x290/0x490 do_mas_munmap+0xbc/0x124 __vm_munmap+0xa8/0x19c __arm64_sys_munmap+0x28/0x50 invoke_syscall+0x78/0x11c el0_svc_common.constprop.0+0x58/0x1c0 do_el0_svc+0x34/0x60 el0_svc+0x2c/0xd4 el0t_64_sync_handler+0x114/0x140 el0t_64_sync+0x1a4/0x1a8 --------------------------------------------------------------------
The commit 06ff87bae8d3 ("arm64: mm: remove unused functions and variable protoypes") fixed a similar lockup on the CPU MMU side. Yet, it can occur to SMMU too since arm_smmu_mm_invalidate_range() is typically called next to MMU tlb flush function, e.g. tlb_flush_mmu_tlbonly { tlb_flush { __flush_tlb_range { // check MAX_TLBI_OPS } } mmu_notifier_invalidate_range { arm_smmu_mm_invalidate_range { // does not check MAX_TLBI_OPS } } }
Clone a CMDQ_MAX_TLBI_OPS from the MAX_TLBI_OPS in tlbflush.h, since in an SVA case SMMU uses the CPU page table, so it makes sense to align with the tlbflush code. Then, replace per-page TLBI commands with a single per-asid TLBI command, if the request size hits this threshold.
Signed-off-by: Nicolin Chen nicolinc@nvidia.com Link: https://lore.kernel.org/r/20230920052257.8615-1-nicolinc@nvidia.com Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 27 ++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c index 5968a568aae2a..ffba8ce93ff88 100644 --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c @@ -186,6 +186,15 @@ static void arm_smmu_free_shared_cd(struct arm_smmu_ctx_desc *cd) } }
+/* + * Cloned from the MAX_TLBI_OPS in arch/arm64/include/asm/tlbflush.h, this + * is used as a threshold to replace per-page TLBI commands to issue in the + * command queue with an address-space TLBI command, when SMMU w/o a range + * invalidation feature handles too many per-page TLBI commands, which will + * otherwise result in a soft lockup. + */ +#define CMDQ_MAX_TLBI_OPS (1 << (PAGE_SHIFT - 3)) + static void arm_smmu_mm_invalidate_range(struct mmu_notifier *mn, struct mm_struct *mm, unsigned long start, unsigned long end) @@ -200,10 +209,22 @@ static void arm_smmu_mm_invalidate_range(struct mmu_notifier *mn, * range. So do a simple translation here by calculating size correctly. */ size = end - start; + if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_RANGE_INV)) { + if (size >= CMDQ_MAX_TLBI_OPS * PAGE_SIZE) + size = 0; + } + + if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_BTM)) { + if (!size) + arm_smmu_tlb_inv_asid(smmu_domain->smmu, + smmu_mn->cd->asid); + else + arm_smmu_tlb_inv_range_asid(start, size, + smmu_mn->cd->asid, + PAGE_SIZE, false, + smmu_domain); + }
- if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_BTM)) - arm_smmu_tlb_inv_range_asid(start, size, smmu_mn->cd->asid, - PAGE_SIZE, false, smmu_domain); arm_smmu_atc_inv_domain(smmu_domain, mm->pasid, start, size); }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Haitao Huang haitao.huang@linux.intel.com
commit c6c2adcba50c2622ed25ba5d5e7f05f584711358 upstream.
The SGX EPC reclaimer (ksgxd) may reclaim the SECS EPC page for an enclave and set secs.epc_page to NULL. The SECS page is used for EAUG and ELDU in the SGX page fault handler. However, the NULL check for secs.epc_page is only done for ELDU, not EAUG before being used.
Fix this by doing the same NULL check and reloading of the SECS page as needed for both EAUG and ELDU.
The SECS page holds global enclave metadata. It can only be reclaimed when there are no other enclave pages remaining. At that point, virtually nothing can be done with the enclave until the SECS page is paged back in.
An enclave can not run nor generate page faults without a resident SECS page. But it is still possible for a #PF for a non-SECS page to race with paging out the SECS page: when the last resident non-SECS page A triggers a #PF in a non-resident page B, and then page A and the SECS both are paged out before the #PF on B is handled.
Hitting this bug requires that race triggered with a #PF for EAUG. Following is a trace when it happens.
BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:sgx_encl_eaug_page+0xc7/0x210 Call Trace: ? __kmem_cache_alloc_node+0x16a/0x440 ? xa_load+0x6e/0xa0 sgx_vma_fault+0x119/0x230 __do_fault+0x36/0x140 do_fault+0x12f/0x400 __handle_mm_fault+0x728/0x1110 handle_mm_fault+0x105/0x310 do_user_addr_fault+0x1ee/0x750 ? __this_cpu_preempt_check+0x13/0x20 exc_page_fault+0x76/0x180 asm_exc_page_fault+0x27/0x30
Fixes: 5a90d2c3f5ef ("x86/sgx: Support adding of pages to an initialized enclave") Signed-off-by: Haitao Huang haitao.huang@linux.intel.com Signed-off-by: Dave Hansen dave.hansen@linux.intel.com Reviewed-by: Jarkko Sakkinen jarkko@kernel.org Reviewed-by: Kai Huang kai.huang@intel.com Acked-by: Reinette Chatre reinette.chatre@intel.com Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20230728051024.33063-1-haitao.huang%40linux.inte... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kernel/cpu/sgx/encl.c | 30 +++++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kernel/cpu/sgx/encl.c b/arch/x86/kernel/cpu/sgx/encl.c index 91fa70e51004..279148e72459 100644 --- a/arch/x86/kernel/cpu/sgx/encl.c +++ b/arch/x86/kernel/cpu/sgx/encl.c @@ -235,6 +235,21 @@ static struct sgx_epc_page *sgx_encl_eldu(struct sgx_encl_page *encl_page, return epc_page; }
+/* + * Ensure the SECS page is not swapped out. Must be called with encl->lock + * to protect the enclave states including SECS and ensure the SECS page is + * not swapped out again while being used. + */ +static struct sgx_epc_page *sgx_encl_load_secs(struct sgx_encl *encl) +{ + struct sgx_epc_page *epc_page = encl->secs.epc_page; + + if (!epc_page) + epc_page = sgx_encl_eldu(&encl->secs, NULL); + + return epc_page; +} + static struct sgx_encl_page *__sgx_encl_load_page(struct sgx_encl *encl, struct sgx_encl_page *entry) { @@ -248,11 +263,9 @@ static struct sgx_encl_page *__sgx_encl_load_page(struct sgx_encl *encl, return entry; }
- if (!(encl->secs.epc_page)) { - epc_page = sgx_encl_eldu(&encl->secs, NULL); - if (IS_ERR(epc_page)) - return ERR_CAST(epc_page); - } + epc_page = sgx_encl_load_secs(encl); + if (IS_ERR(epc_page)) + return ERR_CAST(epc_page);
epc_page = sgx_encl_eldu(entry, encl->secs.epc_page); if (IS_ERR(epc_page)) @@ -339,6 +352,13 @@ static vm_fault_t sgx_encl_eaug_page(struct vm_area_struct *vma,
mutex_lock(&encl->lock);
+ epc_page = sgx_encl_load_secs(encl); + if (IS_ERR(epc_page)) { + if (PTR_ERR(epc_page) == -EBUSY) + vmret = VM_FAULT_NOPAGE; + goto err_out_unlock; + } + epc_page = sgx_alloc_epc_page(encl_page, false); if (IS_ERR(epc_page)) { if (PTR_ERR(epc_page) == -EBUSY)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pu Wen puwen@hygon.cn
commit a5ef7d68cea1344cf524f04981c2b3f80bedbb0d upstream.
Add mitigation for the speculative return stack overflow vulnerability which exists on Hygon processors too.
Signed-off-by: Pu Wen puwen@hygon.cn Signed-off-by: Ingo Molnar mingo@kernel.org Acked-by: Borislav Petkov (AMD) bp@alien8.de Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/tencent_4A14812842F104E93AA722EC939483CEFF05@qq.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kernel/cpu/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1282,7 +1282,7 @@ static const struct x86_cpu_id cpu_vuln_ VULNBL_AMD(0x15, RETBLEED), VULNBL_AMD(0x16, RETBLEED), VULNBL_AMD(0x17, RETBLEED | SMT_RSB | SRSO), - VULNBL_HYGON(0x18, RETBLEED | SMT_RSB), + VULNBL_HYGON(0x18, RETBLEED | SMT_RSB | SRSO), VULNBL_AMD(0x19, SRSO), {} };
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Bonzini pbonzini@redhat.com
commit e8d93d5d93f85949e7299be289c6e7e1154b2f78 upstream.
svm_recalc_instruction_intercepts() is always called at least once before the vCPU is started, so the setting or clearing of the RDTSCP intercept can be dropped from the TSC_AUX virtualization support.
Extracted from a patch by Tom Lendacky.
Cc: stable@vger.kernel.org Fixes: 296d5a17e793 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts") Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kvm/svm/sev.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
--- a/arch/x86/kvm/svm/sev.c +++ b/arch/x86/kvm/svm/sev.c @@ -2990,11 +2990,8 @@ static void sev_es_init_vmcb(struct vcpu
if (boot_cpu_has(X86_FEATURE_V_TSC_AUX) && (guest_cpuid_has(&svm->vcpu, X86_FEATURE_RDTSCP) || - guest_cpuid_has(&svm->vcpu, X86_FEATURE_RDPID))) { + guest_cpuid_has(&svm->vcpu, X86_FEATURE_RDPID))) set_msr_interception(vcpu, svm->msrpm, MSR_TSC_AUX, 1, 1); - if (guest_cpuid_has(&svm->vcpu, X86_FEATURE_RDTSCP)) - svm_clr_intercept(svm, INTERCEPT_RDTSCP); - } }
void sev_init_vmcb(struct vcpu_svm *svm)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tom Lendacky thomas.lendacky@amd.com
commit e0096d01c4fcb8c96c05643cfc2c20ab78eae4da upstream.
The checks for virtualizing TSC_AUX occur during the vCPU reset processing path. However, at the time of initial vCPU reset processing, when the vCPU is first created, not all of the guest CPUID information has been set. In this case the RDTSCP and RDPID feature support for the guest is not in place and so TSC_AUX virtualization is not established.
This continues for each vCPU created for the guest. On the first boot of an AP, vCPU reset processing is executed as a result of an APIC INIT event, this time with all of the guest CPUID information set, resulting in TSC_AUX virtualization being enabled, but only for the APs. The BSP always sees a TSC_AUX value of 0 which probably went unnoticed because, at least for Linux, the BSP TSC_AUX value is 0.
Move the TSC_AUX virtualization enablement out of the init_vmcb() path and into the vcpu_after_set_cpuid() path to allow for proper initialization of the support after the guest CPUID information has been set.
With the TSC_AUX virtualization support now in the vcpu_set_after_cpuid() path, the intercepts must be either cleared or set based on the guest CPUID input.
Fixes: 296d5a17e793 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts") Signed-off-by: Tom Lendacky thomas.lendacky@amd.com Message-Id: 4137fbcb9008951ab5f0befa74a0399d2cce809a.1694811272.git.thomas.lendacky@amd.com Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kvm/svm/sev.c | 31 ++++++++++++++++++++++++++----- arch/x86/kvm/svm/svm.c | 9 ++------- arch/x86/kvm/svm/svm.h | 1 + 3 files changed, 29 insertions(+), 12 deletions(-)
--- a/arch/x86/kvm/svm/sev.c +++ b/arch/x86/kvm/svm/sev.c @@ -2941,6 +2941,32 @@ int sev_es_string_io(struct vcpu_svm *sv count, in); }
+static void sev_es_vcpu_after_set_cpuid(struct vcpu_svm *svm) +{ + struct kvm_vcpu *vcpu = &svm->vcpu; + + if (boot_cpu_has(X86_FEATURE_V_TSC_AUX)) { + bool v_tsc_aux = guest_cpuid_has(vcpu, X86_FEATURE_RDTSCP) || + guest_cpuid_has(vcpu, X86_FEATURE_RDPID); + + set_msr_interception(vcpu, svm->msrpm, MSR_TSC_AUX, v_tsc_aux, v_tsc_aux); + } +} + +void sev_vcpu_after_set_cpuid(struct vcpu_svm *svm) +{ + struct kvm_vcpu *vcpu = &svm->vcpu; + struct kvm_cpuid_entry2 *best; + + /* For sev guests, the memory encryption bit is not reserved in CR3. */ + best = kvm_find_cpuid_entry(vcpu, 0x8000001F); + if (best) + vcpu->arch.reserved_gpa_bits &= ~(1UL << (best->ebx & 0x3f)); + + if (sev_es_guest(svm->vcpu.kvm)) + sev_es_vcpu_after_set_cpuid(svm); +} + static void sev_es_init_vmcb(struct vcpu_svm *svm) { struct kvm_vcpu *vcpu = &svm->vcpu; @@ -2987,11 +3013,6 @@ static void sev_es_init_vmcb(struct vcpu set_msr_interception(vcpu, svm->msrpm, MSR_IA32_LASTBRANCHTOIP, 1, 1); set_msr_interception(vcpu, svm->msrpm, MSR_IA32_LASTINTFROMIP, 1, 1); set_msr_interception(vcpu, svm->msrpm, MSR_IA32_LASTINTTOIP, 1, 1); - - if (boot_cpu_has(X86_FEATURE_V_TSC_AUX) && - (guest_cpuid_has(&svm->vcpu, X86_FEATURE_RDTSCP) || - guest_cpuid_has(&svm->vcpu, X86_FEATURE_RDPID))) - set_msr_interception(vcpu, svm->msrpm, MSR_TSC_AUX, 1, 1); }
void sev_init_vmcb(struct vcpu_svm *svm) --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -4173,7 +4173,6 @@ static bool svm_has_emulated_msr(struct static void svm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu) { struct vcpu_svm *svm = to_svm(vcpu); - struct kvm_cpuid_entry2 *best;
vcpu->arch.xsaves_enabled = guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) && boot_cpu_has(X86_FEATURE_XSAVE) && @@ -4198,12 +4197,8 @@ static void svm_vcpu_after_set_cpuid(str
svm_recalc_instruction_intercepts(vcpu, svm);
- /* For sev guests, the memory encryption bit is not reserved in CR3. */ - if (sev_guest(vcpu->kvm)) { - best = kvm_find_cpuid_entry(vcpu, 0x8000001F); - if (best) - vcpu->arch.reserved_gpa_bits &= ~(1UL << (best->ebx & 0x3f)); - } + if (sev_guest(vcpu->kvm)) + sev_vcpu_after_set_cpuid(svm);
init_vmcb_after_set_cpuid(vcpu); } --- a/arch/x86/kvm/svm/svm.h +++ b/arch/x86/kvm/svm/svm.h @@ -677,6 +677,7 @@ void __init sev_hardware_setup(void); void sev_hardware_unsetup(void); int sev_cpu_init(struct svm_cpu_data *sd); void sev_init_vmcb(struct vcpu_svm *svm); +void sev_vcpu_after_set_cpuid(struct vcpu_svm *svm); void sev_free_vcpu(struct kvm_vcpu *vcpu); int sev_handle_vmgexit(struct kvm_vcpu *vcpu); int sev_es_string_io(struct vcpu_svm *svm, int size, unsigned int port, int in);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson seanjc@google.com
commit 50107e8b2a8a59d8cec7e8454e27c1f8e365acdb upstream.
The mmu_notifier path is a bit of a special snowflake, e.g. it zaps only a single address space (because it's per-slot), and can't always yield. Because of this, it calls kvm_tdp_mmu_zap_leafs() in ways that no one else does.
Iterate manually over the leafs in response to an mmu_notifier invalidation, instead of invoking kvm_tdp_mmu_zap_leafs(). Drop the @can_yield param from kvm_tdp_mmu_zap_leafs() as its sole remaining caller unconditionally passes "true".
Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson seanjc@google.com Message-Id: 20230916003916.2545000-2-seanjc@google.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kvm/mmu/mmu.c | 2 +- arch/x86/kvm/mmu/tdp_mmu.c | 13 +++++++++---- arch/x86/kvm/mmu/tdp_mmu.h | 4 ++-- 3 files changed, 12 insertions(+), 7 deletions(-)
--- a/arch/x86/kvm/mmu/mmu.c +++ b/arch/x86/kvm/mmu/mmu.c @@ -6093,7 +6093,7 @@ void kvm_zap_gfn_range(struct kvm *kvm, if (is_tdp_mmu_enabled(kvm)) { for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) flush = kvm_tdp_mmu_zap_leafs(kvm, i, gfn_start, - gfn_end, true, flush); + gfn_end, flush); }
if (flush) --- a/arch/x86/kvm/mmu/tdp_mmu.c +++ b/arch/x86/kvm/mmu/tdp_mmu.c @@ -956,12 +956,12 @@ static bool tdp_mmu_zap_leafs(struct kvm * more SPTEs were zapped since the MMU lock was last acquired. */ bool kvm_tdp_mmu_zap_leafs(struct kvm *kvm, int as_id, gfn_t start, gfn_t end, - bool can_yield, bool flush) + bool flush) { struct kvm_mmu_page *root;
for_each_tdp_mmu_root_yield_safe(kvm, root, as_id) - flush = tdp_mmu_zap_leafs(kvm, root, start, end, can_yield, flush); + flush = tdp_mmu_zap_leafs(kvm, root, start, end, true, flush);
return flush; } @@ -1221,8 +1221,13 @@ int kvm_tdp_mmu_map(struct kvm_vcpu *vcp bool kvm_tdp_mmu_unmap_gfn_range(struct kvm *kvm, struct kvm_gfn_range *range, bool flush) { - return kvm_tdp_mmu_zap_leafs(kvm, range->slot->as_id, range->start, - range->end, range->may_block, flush); + struct kvm_mmu_page *root; + + for_each_tdp_mmu_root_yield_safe(kvm, root, range->slot->as_id) + flush = tdp_mmu_zap_leafs(kvm, root, range->start, range->end, + range->may_block, flush); + + return flush; }
typedef bool (*tdp_handler_t)(struct kvm *kvm, struct tdp_iter *iter, --- a/arch/x86/kvm/mmu/tdp_mmu.h +++ b/arch/x86/kvm/mmu/tdp_mmu.h @@ -15,8 +15,8 @@ __must_check static inline bool kvm_tdp_ void kvm_tdp_mmu_put_root(struct kvm *kvm, struct kvm_mmu_page *root, bool shared);
-bool kvm_tdp_mmu_zap_leafs(struct kvm *kvm, int as_id, gfn_t start, - gfn_t end, bool can_yield, bool flush); +bool kvm_tdp_mmu_zap_leafs(struct kvm *kvm, int as_id, gfn_t start, gfn_t end, + bool flush); bool kvm_tdp_mmu_zap_sp(struct kvm *kvm, struct kvm_mmu_page *sp); void kvm_tdp_mmu_zap_all(struct kvm *kvm); void kvm_tdp_mmu_invalidate_all_roots(struct kvm *kvm);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Bonzini pbonzini@redhat.com
commit 441a5dfcd96854cbcb625709e2694a9c60adfaab upstream.
All callers except the MMU notifier want to process all address spaces. Remove the address space ID argument of for_each_tdp_mmu_root_yield_safe() and switch the MMU notifier to use __for_each_tdp_mmu_root_yield_safe().
Extracted out of a patch by Sean Christopherson seanjc@google.com
Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kvm/mmu/mmu.c | 8 ++------ arch/x86/kvm/mmu/tdp_mmu.c | 22 +++++++++++----------- arch/x86/kvm/mmu/tdp_mmu.h | 3 +-- 3 files changed, 14 insertions(+), 19 deletions(-)
--- a/arch/x86/kvm/mmu/mmu.c +++ b/arch/x86/kvm/mmu/mmu.c @@ -6079,7 +6079,6 @@ static bool kvm_rmap_zap_gfn_range(struc void kvm_zap_gfn_range(struct kvm *kvm, gfn_t gfn_start, gfn_t gfn_end) { bool flush; - int i;
if (WARN_ON_ONCE(gfn_end <= gfn_start)) return; @@ -6090,11 +6089,8 @@ void kvm_zap_gfn_range(struct kvm *kvm,
flush = kvm_rmap_zap_gfn_range(kvm, gfn_start, gfn_end);
- if (is_tdp_mmu_enabled(kvm)) { - for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) - flush = kvm_tdp_mmu_zap_leafs(kvm, i, gfn_start, - gfn_end, flush); - } + if (is_tdp_mmu_enabled(kvm)) + flush = kvm_tdp_mmu_zap_leafs(kvm, gfn_start, gfn_end, flush);
if (flush) kvm_flush_remote_tlbs_with_address(kvm, gfn_start, --- a/arch/x86/kvm/mmu/tdp_mmu.c +++ b/arch/x86/kvm/mmu/tdp_mmu.c @@ -222,8 +222,12 @@ static struct kvm_mmu_page *tdp_mmu_next #define for_each_valid_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared) \ __for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared, true)
-#define for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id) \ - __for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, false, false) +#define for_each_tdp_mmu_root_yield_safe(_kvm, _root) \ + for (_root = tdp_mmu_next_root(_kvm, NULL, false, false); \ + _root; \ + _root = tdp_mmu_next_root(_kvm, _root, false, false)) \ + if (!kvm_lockdep_assert_mmu_lock_held(_kvm, false)) { \ + } else
/* * Iterate over all TDP MMU roots. Requires that mmu_lock be held for write, @@ -955,12 +959,11 @@ static bool tdp_mmu_zap_leafs(struct kvm * true if a TLB flush is needed before releasing the MMU lock, i.e. if one or * more SPTEs were zapped since the MMU lock was last acquired. */ -bool kvm_tdp_mmu_zap_leafs(struct kvm *kvm, int as_id, gfn_t start, gfn_t end, - bool flush) +bool kvm_tdp_mmu_zap_leafs(struct kvm *kvm, gfn_t start, gfn_t end, bool flush) { struct kvm_mmu_page *root;
- for_each_tdp_mmu_root_yield_safe(kvm, root, as_id) + for_each_tdp_mmu_root_yield_safe(kvm, root) flush = tdp_mmu_zap_leafs(kvm, root, start, end, true, flush);
return flush; @@ -969,7 +972,6 @@ bool kvm_tdp_mmu_zap_leafs(struct kvm *k void kvm_tdp_mmu_zap_all(struct kvm *kvm) { struct kvm_mmu_page *root; - int i;
/* * Zap all roots, including invalid roots, as all SPTEs must be dropped @@ -983,10 +985,8 @@ void kvm_tdp_mmu_zap_all(struct kvm *kvm * is being destroyed or the userspace VMM has exited. In both cases, * KVM_RUN is unreachable, i.e. no vCPUs will ever service the request. */ - for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) { - for_each_tdp_mmu_root_yield_safe(kvm, root, i) - tdp_mmu_zap_root(kvm, root, false); - } + for_each_tdp_mmu_root_yield_safe(kvm, root) + tdp_mmu_zap_root(kvm, root, false); }
/* @@ -1223,7 +1223,7 @@ bool kvm_tdp_mmu_unmap_gfn_range(struct { struct kvm_mmu_page *root;
- for_each_tdp_mmu_root_yield_safe(kvm, root, range->slot->as_id) + __for_each_tdp_mmu_root_yield_safe(kvm, root, range->slot->as_id, false, false) flush = tdp_mmu_zap_leafs(kvm, root, range->start, range->end, range->may_block, flush);
--- a/arch/x86/kvm/mmu/tdp_mmu.h +++ b/arch/x86/kvm/mmu/tdp_mmu.h @@ -15,8 +15,7 @@ __must_check static inline bool kvm_tdp_ void kvm_tdp_mmu_put_root(struct kvm *kvm, struct kvm_mmu_page *root, bool shared);
-bool kvm_tdp_mmu_zap_leafs(struct kvm *kvm, int as_id, gfn_t start, gfn_t end, - bool flush); +bool kvm_tdp_mmu_zap_leafs(struct kvm *kvm, gfn_t start, gfn_t end, bool flush); bool kvm_tdp_mmu_zap_sp(struct kvm *kvm, struct kvm_mmu_page *sp); void kvm_tdp_mmu_zap_all(struct kvm *kvm); void kvm_tdp_mmu_invalidate_all_roots(struct kvm *kvm);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni pabeni@redhat.com
commit 6bec041147a2a64a490d1f813e8a004443061b38 upstream.
In case multiple subflows race to update the mptcp-level receive window, the subflow losing the race should use the window value provided by the "winning" subflow to update it's own tcp-level rcv_wnd.
To such goal, the current code bogusly uses the mptcp-level rcv_wnd value as observed before the update attempt. On unlucky circumstances that may lead to TCP-level window shrinkage, and stall the other end.
Address the issue feeding to the rcv wnd update the correct value.
Fixes: f3589be0c420 ("mptcp: never shrink offered window") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/427 Signed-off-by: Paolo Abeni pabeni@redhat.com Reviewed-by: Mat Martineau martineau@kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mptcp/options.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- a/net/mptcp/options.c +++ b/net/mptcp/options.c @@ -1248,12 +1248,13 @@ static void mptcp_set_rwin(struct tcp_so
if (rcv_wnd == rcv_wnd_old) break; - if (before64(rcv_wnd_new, rcv_wnd)) { + + rcv_wnd_old = rcv_wnd; + if (before64(rcv_wnd_new, rcv_wnd_old)) { MPTCP_INC_STATS(sock_net(ssk), MPTCP_MIB_RCVWNDCONFLICTUPDATE); goto raise_win; } MPTCP_INC_STATS(sock_net(ssk), MPTCP_MIB_RCVWNDCONFLICT); - rcv_wnd_old = rcv_wnd; } return; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ricky WU ricky_wu@realtek.com
commit 0e4cac557531a4c93de108d9ff11329fcad482ff upstream.
commit 101bd907b424 ("misc: rtsx: judge ASPM Mode to set PETXCFG Reg") some readers no longer force #CLKREQ to low when the system need to enter ASPM. But some platform maybe not implement complete ASPM? it causes some platforms can not boot
Like in the past only the platform support L1ss we release the #CLKREQ. Move the judgment (L1ss) to probe, we think read config space one time when the driver start is enough
Fixes: 101bd907b424 ("misc: rtsx: judge ASPM Mode to set PETXCFG Reg") Cc: stable stable@kernel.org Reported-by: Paul Grandperrin paul.grandperrin@gmail.com Signed-off-by: Ricky Wu ricky_wu@realtek.com Tested-By: Jade Lovelace lists@jade.fyi Link: https://lore.kernel.org/r/37b1afb997f14946a8784c73d1f9a4f5@realtek.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/misc/cardreader/rts5227.c | 55 +++-------------------------------- drivers/misc/cardreader/rts5228.c | 57 +++++++++++-------------------------- drivers/misc/cardreader/rts5249.c | 56 ++++-------------------------------- drivers/misc/cardreader/rts5260.c | 43 ++++++++------------------- drivers/misc/cardreader/rts5261.c | 52 ++++++++------------------------- drivers/misc/cardreader/rtsx_pcr.c | 51 +++++++++++++++++++++++++++++---- 6 files changed, 102 insertions(+), 212 deletions(-)
--- a/drivers/misc/cardreader/rts5227.c +++ b/drivers/misc/cardreader/rts5227.c @@ -83,63 +83,20 @@ static void rts5227_fetch_vendor_setting
static void rts5227_init_from_cfg(struct rtsx_pcr *pcr) { - struct pci_dev *pdev = pcr->pci; - int l1ss; - u32 lval; struct rtsx_cr_option *option = &pcr->option;
- l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS); - if (!l1ss) - return; - - pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, &lval); - if (CHK_PCI_PID(pcr, 0x522A)) { - if (0 == (lval & 0x0F)) - rtsx_pci_enable_oobs_polling(pcr); - else + if (rtsx_check_dev_flag(pcr, ASPM_L1_1_EN | ASPM_L1_2_EN + | PM_L1_1_EN | PM_L1_2_EN)) rtsx_pci_disable_oobs_polling(pcr); + else + rtsx_pci_enable_oobs_polling(pcr); }
- if (lval & PCI_L1SS_CTL1_ASPM_L1_1) - rtsx_set_dev_flag(pcr, ASPM_L1_1_EN); - else - rtsx_clear_dev_flag(pcr, ASPM_L1_1_EN); - - if (lval & PCI_L1SS_CTL1_ASPM_L1_2) - rtsx_set_dev_flag(pcr, ASPM_L1_2_EN); - else - rtsx_clear_dev_flag(pcr, ASPM_L1_2_EN); - - if (lval & PCI_L1SS_CTL1_PCIPM_L1_1) - rtsx_set_dev_flag(pcr, PM_L1_1_EN); - else - rtsx_clear_dev_flag(pcr, PM_L1_1_EN); - - if (lval & PCI_L1SS_CTL1_PCIPM_L1_2) - rtsx_set_dev_flag(pcr, PM_L1_2_EN); - else - rtsx_clear_dev_flag(pcr, PM_L1_2_EN); - if (option->ltr_en) { - u16 val; - - pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &val); - if (val & PCI_EXP_DEVCTL2_LTR_EN) { - option->ltr_enabled = true; - option->ltr_active = true; + if (option->ltr_enabled) rtsx_set_ltr_latency(pcr, option->ltr_active_latency); - } else { - option->ltr_enabled = false; - } } - - if (rtsx_check_dev_flag(pcr, ASPM_L1_1_EN | ASPM_L1_2_EN - | PM_L1_1_EN | PM_L1_2_EN)) - option->force_clkreq_0 = false; - else - option->force_clkreq_0 = true; - }
static int rts5227_extra_init_hw(struct rtsx_pcr *pcr) @@ -195,7 +152,7 @@ static int rts5227_extra_init_hw(struct } }
- if (option->force_clkreq_0 && pcr->aspm_mode == ASPM_MODE_CFG) + if (option->force_clkreq_0) rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_LOW); else --- a/drivers/misc/cardreader/rts5228.c +++ b/drivers/misc/cardreader/rts5228.c @@ -386,59 +386,25 @@ static void rts5228_process_ocp(struct r
static void rts5228_init_from_cfg(struct rtsx_pcr *pcr) { - struct pci_dev *pdev = pcr->pci; - int l1ss; - u32 lval; struct rtsx_cr_option *option = &pcr->option;
- l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS); - if (!l1ss) - return; - - pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, &lval); - - if (0 == (lval & 0x0F)) - rtsx_pci_enable_oobs_polling(pcr); - else + if (rtsx_check_dev_flag(pcr, ASPM_L1_1_EN | ASPM_L1_2_EN + | PM_L1_1_EN | PM_L1_2_EN)) rtsx_pci_disable_oobs_polling(pcr); - - if (lval & PCI_L1SS_CTL1_ASPM_L1_1) - rtsx_set_dev_flag(pcr, ASPM_L1_1_EN); - else - rtsx_clear_dev_flag(pcr, ASPM_L1_1_EN); - - if (lval & PCI_L1SS_CTL1_ASPM_L1_2) - rtsx_set_dev_flag(pcr, ASPM_L1_2_EN); - else - rtsx_clear_dev_flag(pcr, ASPM_L1_2_EN); - - if (lval & PCI_L1SS_CTL1_PCIPM_L1_1) - rtsx_set_dev_flag(pcr, PM_L1_1_EN); else - rtsx_clear_dev_flag(pcr, PM_L1_1_EN); - - if (lval & PCI_L1SS_CTL1_PCIPM_L1_2) - rtsx_set_dev_flag(pcr, PM_L1_2_EN); - else - rtsx_clear_dev_flag(pcr, PM_L1_2_EN); + rtsx_pci_enable_oobs_polling(pcr);
rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0xFF, 0); - if (option->ltr_en) { - u16 val;
- pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &val); - if (val & PCI_EXP_DEVCTL2_LTR_EN) { - option->ltr_enabled = true; - option->ltr_active = true; + if (option->ltr_en) { + if (option->ltr_enabled) rtsx_set_ltr_latency(pcr, option->ltr_active_latency); - } else { - option->ltr_enabled = false; - } } }
static int rts5228_extra_init_hw(struct rtsx_pcr *pcr) { + struct rtsx_cr_option *option = &pcr->option;
rtsx_pci_write_register(pcr, RTS5228_AUTOLOAD_CFG1, CD_RESUME_EN_MASK, CD_RESUME_EN_MASK); @@ -469,6 +435,17 @@ static int rts5228_extra_init_hw(struct else rtsx_pci_write_register(pcr, PETXCFG, 0x30, 0x00);
+ /* + * If u_force_clkreq_0 is enabled, CLKREQ# PIN will be forced + * to drive low, and we forcibly request clock. + */ + if (option->force_clkreq_0) + rtsx_pci_write_register(pcr, PETXCFG, + FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_LOW); + else + rtsx_pci_write_register(pcr, PETXCFG, + FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_HIGH); + rtsx_pci_write_register(pcr, PWD_SUSPEND_EN, 0xFF, 0xFB);
if (pcr->rtd3_en) { --- a/drivers/misc/cardreader/rts5249.c +++ b/drivers/misc/cardreader/rts5249.c @@ -86,64 +86,22 @@ static void rtsx_base_fetch_vendor_setti
static void rts5249_init_from_cfg(struct rtsx_pcr *pcr) { - struct pci_dev *pdev = pcr->pci; - int l1ss; struct rtsx_cr_option *option = &(pcr->option); - u32 lval; - - l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS); - if (!l1ss) - return; - - pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, &lval);
if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A)) { - if (0 == (lval & 0x0F)) - rtsx_pci_enable_oobs_polling(pcr); - else + if (rtsx_check_dev_flag(pcr, ASPM_L1_1_EN | ASPM_L1_2_EN + | PM_L1_1_EN | PM_L1_2_EN)) rtsx_pci_disable_oobs_polling(pcr); + else + rtsx_pci_enable_oobs_polling(pcr); }
- - if (lval & PCI_L1SS_CTL1_ASPM_L1_1) - rtsx_set_dev_flag(pcr, ASPM_L1_1_EN); - - if (lval & PCI_L1SS_CTL1_ASPM_L1_2) - rtsx_set_dev_flag(pcr, ASPM_L1_2_EN); - - if (lval & PCI_L1SS_CTL1_PCIPM_L1_1) - rtsx_set_dev_flag(pcr, PM_L1_1_EN); - - if (lval & PCI_L1SS_CTL1_PCIPM_L1_2) - rtsx_set_dev_flag(pcr, PM_L1_2_EN); - if (option->ltr_en) { - u16 val; - - pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &val); - if (val & PCI_EXP_DEVCTL2_LTR_EN) { - option->ltr_enabled = true; - option->ltr_active = true; + if (option->ltr_enabled) rtsx_set_ltr_latency(pcr, option->ltr_active_latency); - } else { - option->ltr_enabled = false; - } } }
-static int rts5249_init_from_hw(struct rtsx_pcr *pcr) -{ - struct rtsx_cr_option *option = &(pcr->option); - - if (rtsx_check_dev_flag(pcr, ASPM_L1_1_EN | ASPM_L1_2_EN - | PM_L1_1_EN | PM_L1_2_EN)) - option->force_clkreq_0 = false; - else - option->force_clkreq_0 = true; - - return 0; -} - static void rts52xa_force_power_down(struct rtsx_pcr *pcr, u8 pm_state, bool runtime) { /* Set relink_time to 0 */ @@ -276,7 +234,6 @@ static int rts5249_extra_init_hw(struct struct rtsx_cr_option *option = &(pcr->option);
rts5249_init_from_cfg(pcr); - rts5249_init_from_hw(pcr);
rtsx_pci_init_cmd(pcr);
@@ -327,11 +284,12 @@ static int rts5249_extra_init_hw(struct } }
+ /* * If u_force_clkreq_0 is enabled, CLKREQ# PIN will be forced * to drive low, and we forcibly request clock. */ - if (option->force_clkreq_0 && pcr->aspm_mode == ASPM_MODE_CFG) + if (option->force_clkreq_0) rtsx_pci_write_register(pcr, PETXCFG, FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_LOW); else --- a/drivers/misc/cardreader/rts5260.c +++ b/drivers/misc/cardreader/rts5260.c @@ -480,47 +480,19 @@ static void rts5260_pwr_saving_setting(s
static void rts5260_init_from_cfg(struct rtsx_pcr *pcr) { - struct pci_dev *pdev = pcr->pci; - int l1ss; struct rtsx_cr_option *option = &pcr->option; - u32 lval; - - l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS); - if (!l1ss) - return; - - pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, &lval); - - if (lval & PCI_L1SS_CTL1_ASPM_L1_1) - rtsx_set_dev_flag(pcr, ASPM_L1_1_EN); - - if (lval & PCI_L1SS_CTL1_ASPM_L1_2) - rtsx_set_dev_flag(pcr, ASPM_L1_2_EN); - - if (lval & PCI_L1SS_CTL1_PCIPM_L1_1) - rtsx_set_dev_flag(pcr, PM_L1_1_EN); - - if (lval & PCI_L1SS_CTL1_PCIPM_L1_2) - rtsx_set_dev_flag(pcr, PM_L1_2_EN);
rts5260_pwr_saving_setting(pcr);
if (option->ltr_en) { - u16 val; - - pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &val); - if (val & PCI_EXP_DEVCTL2_LTR_EN) { - option->ltr_enabled = true; - option->ltr_active = true; + if (option->ltr_enabled) rtsx_set_ltr_latency(pcr, option->ltr_active_latency); - } else { - option->ltr_enabled = false; - } } }
static int rts5260_extra_init_hw(struct rtsx_pcr *pcr) { + struct rtsx_cr_option *option = &pcr->option;
/* Set mcu_cnt to 7 to ensure data can be sampled properly */ rtsx_pci_write_register(pcr, 0xFC03, 0x7F, 0x07); @@ -539,6 +511,17 @@ static int rts5260_extra_init_hw(struct
rts5260_init_hw(pcr);
+ /* + * If u_force_clkreq_0 is enabled, CLKREQ# PIN will be forced + * to drive low, and we forcibly request clock. + */ + if (option->force_clkreq_0) + rtsx_pci_write_register(pcr, PETXCFG, + FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_LOW); + else + rtsx_pci_write_register(pcr, PETXCFG, + FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_HIGH); + rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3, 0x10, 0x00);
return 0; --- a/drivers/misc/cardreader/rts5261.c +++ b/drivers/misc/cardreader/rts5261.c @@ -454,54 +454,17 @@ static void rts5261_init_from_hw(struct
static void rts5261_init_from_cfg(struct rtsx_pcr *pcr) { - struct pci_dev *pdev = pcr->pci; - int l1ss; - u32 lval; struct rtsx_cr_option *option = &pcr->option;
- l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS); - if (!l1ss) - return; - - pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, &lval); - - if (lval & PCI_L1SS_CTL1_ASPM_L1_1) - rtsx_set_dev_flag(pcr, ASPM_L1_1_EN); - else - rtsx_clear_dev_flag(pcr, ASPM_L1_1_EN); - - if (lval & PCI_L1SS_CTL1_ASPM_L1_2) - rtsx_set_dev_flag(pcr, ASPM_L1_2_EN); - else - rtsx_clear_dev_flag(pcr, ASPM_L1_2_EN); - - if (lval & PCI_L1SS_CTL1_PCIPM_L1_1) - rtsx_set_dev_flag(pcr, PM_L1_1_EN); - else - rtsx_clear_dev_flag(pcr, PM_L1_1_EN); - - if (lval & PCI_L1SS_CTL1_PCIPM_L1_2) - rtsx_set_dev_flag(pcr, PM_L1_2_EN); - else - rtsx_clear_dev_flag(pcr, PM_L1_2_EN); - - rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0xFF, 0); if (option->ltr_en) { - u16 val; - - pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &val); - if (val & PCI_EXP_DEVCTL2_LTR_EN) { - option->ltr_enabled = true; - option->ltr_active = true; + if (option->ltr_enabled) rtsx_set_ltr_latency(pcr, option->ltr_active_latency); - } else { - option->ltr_enabled = false; - } } }
static int rts5261_extra_init_hw(struct rtsx_pcr *pcr) { + struct rtsx_cr_option *option = &pcr->option; u32 val;
rtsx_pci_write_register(pcr, RTS5261_AUTOLOAD_CFG1, @@ -547,6 +510,17 @@ static int rts5261_extra_init_hw(struct else rtsx_pci_write_register(pcr, PETXCFG, 0x30, 0x00);
+ /* + * If u_force_clkreq_0 is enabled, CLKREQ# PIN will be forced + * to drive low, and we forcibly request clock. + */ + if (option->force_clkreq_0) + rtsx_pci_write_register(pcr, PETXCFG, + FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_LOW); + else + rtsx_pci_write_register(pcr, PETXCFG, + FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_HIGH); + rtsx_pci_write_register(pcr, PWD_SUSPEND_EN, 0xFF, 0xFB);
if (pcr->rtd3_en) { --- a/drivers/misc/cardreader/rtsx_pcr.c +++ b/drivers/misc/cardreader/rtsx_pcr.c @@ -1326,11 +1326,8 @@ static int rtsx_pci_init_hw(struct rtsx_ return err; }
- if (pcr->aspm_mode == ASPM_MODE_REG) { + if (pcr->aspm_mode == ASPM_MODE_REG) rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0x30, 0x30); - rtsx_pci_write_register(pcr, PETXCFG, - FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_HIGH); - }
/* No CD interrupt if probing driver with card inserted. * So we need to initialize pcr->card_exist here. @@ -1345,7 +1342,9 @@ static int rtsx_pci_init_hw(struct rtsx_
static int rtsx_pci_init_chip(struct rtsx_pcr *pcr) { - int err; + struct rtsx_cr_option *option = &(pcr->option); + int err, l1ss; + u32 lval; u16 cfg_val; u8 val;
@@ -1430,6 +1429,48 @@ static int rtsx_pci_init_chip(struct rts pcr->aspm_enabled = true; }
+ l1ss = pci_find_ext_capability(pcr->pci, PCI_EXT_CAP_ID_L1SS); + if (l1ss) { + pci_read_config_dword(pcr->pci, l1ss + PCI_L1SS_CTL1, &lval); + + if (lval & PCI_L1SS_CTL1_ASPM_L1_1) + rtsx_set_dev_flag(pcr, ASPM_L1_1_EN); + else + rtsx_clear_dev_flag(pcr, ASPM_L1_1_EN); + + if (lval & PCI_L1SS_CTL1_ASPM_L1_2) + rtsx_set_dev_flag(pcr, ASPM_L1_2_EN); + else + rtsx_clear_dev_flag(pcr, ASPM_L1_2_EN); + + if (lval & PCI_L1SS_CTL1_PCIPM_L1_1) + rtsx_set_dev_flag(pcr, PM_L1_1_EN); + else + rtsx_clear_dev_flag(pcr, PM_L1_1_EN); + + if (lval & PCI_L1SS_CTL1_PCIPM_L1_2) + rtsx_set_dev_flag(pcr, PM_L1_2_EN); + else + rtsx_clear_dev_flag(pcr, PM_L1_2_EN); + + pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &cfg_val); + if (cfg_val & PCI_EXP_DEVCTL2_LTR_EN) { + option->ltr_enabled = true; + option->ltr_active = true; + } else { + option->ltr_enabled = false; + } + + if (rtsx_check_dev_flag(pcr, ASPM_L1_1_EN | ASPM_L1_2_EN + | PM_L1_1_EN | PM_L1_2_EN)) + option->force_clkreq_0 = false; + else + option->force_clkreq_0 = true; + } else { + option->ltr_enabled = false; + option->force_clkreq_0 = true; + } + if (pcr->ops->fetch_vendor_settings) pcr->ops->fetch_vendor_settings(pcr);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Starke daniel.starke@siemens.com
commit 29346e217b8ab8a52889b88f00b268278d6b7668 upstream.
This reverts commit 9b9c8195f3f0d74a826077fc1c01b9ee74907239.
The commit above is reverted as it did not solve the original issue.
gsm_cleanup_mux() tries to free up the virtual ttys by calling gsm_dlci_release() for each available DLCI. There, dlci_put() is called to decrease the reference counter for the DLCI via tty_port_put() which finally calls gsm_dlci_free(). This already clears the pointer which is being checked in gsm_cleanup_mux() before calling gsm_dlci_release(). Therefore, it is not necessary to clear this pointer in gsm_cleanup_mux() as done in the reverted commit. The commit introduces a null pointer dereference: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x156/0x420 ? search_exception_tables+0x37/0x50 ? fixup_exception+0x21/0x310 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? tty_port_put+0x19/0xa0 gsmtty_cleanup+0x29/0x80 [n_gsm] release_one_tty+0x37/0xe0 process_one_work+0x1e6/0x3e0 worker_thread+0x4c/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe1/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK>
The actual issue is that nothing guards dlci_put() from being called multiple times while the tty driver was triggered but did not yet finished calling gsm_dlci_free().
Fixes: 9b9c8195f3f0 ("tty: n_gsm: fix UAF in gsm_cleanup_mux") Cc: stable stable@kernel.org Signed-off-by: Daniel Starke daniel.starke@siemens.com Link: https://lore.kernel.org/r/20230914051507.3240-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/n_gsm.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2509,10 +2509,8 @@ static void gsm_cleanup_mux(struct gsm_m gsm->has_devices = false; } for (i = NUM_DLCI - 1; i >= 0; i--) - if (gsm->dlci[i]) { + if (gsm->dlci[i]) gsm_dlci_release(gsm->dlci[i]); - gsm->dlci[i] = NULL; - } mutex_unlock(&gsm->mutex); /* Now wipe the queues */ tty_ldisc_flush(gsm->tty);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Shevchenko andriy.shevchenko@linux.intel.com
commit cce7fc8b29961b64fadb1ce398dc5ff32a79643b upstream.
In case the leaf driver wants to use IRQ polling (irq = 0) and IIR register shows that an interrupt happened in the 8250 hardware the IRQ data can be NULL. In such a case we need to skip the wake event as we came to this path from the timer interrupt and quite likely system is already awake.
Without this fix we have got an Oops:
serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A ... BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:serial8250_handle_irq+0x7c/0x240 Call Trace: ? serial8250_handle_irq+0x7c/0x240 ? __pfx_serial8250_timeout+0x10/0x10
Fixes: 0ba9e3a13c6a ("serial: 8250: Add missing wakeup event reporting") Cc: stable stable@kernel.org Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Reviewed-by: Florian Fainelli florian.fainelli@broadcom.com Link: https://lore.kernel.org/r/20230831222555.614426-1-andriy.shevchenko@linux.in... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/8250/8250_port.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1953,7 +1953,10 @@ int serial8250_handle_irq(struct uart_po skip_rx = true;
if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) { - if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) + struct irq_data *d; + + d = irq_get_irq_data(port->irq); + if (d && irqd_is_wakeup_set(d)) pm_wakeup_event(tport->tty->dev, 0); if (!up->dma || handle_rx_dma(up, iir)) status = serial8250_rx_chars(up, status);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pan Bian bianpan2016@163.com
commit 7ee29facd8a9c5a26079148e36bcf07141b3a6bc upstream.
In nilfs_gccache_submit_read_data(), brelse(bh) is called to drop the reference count of bh when the call to nilfs_dat_translate() fails. If the reference count hits 0 and its owner page gets unlocked, bh may be freed. However, bh->b_page is dereferenced to put the page after that, which may result in a use-after-free bug. This patch moves the release operation after unlocking and putting the page.
NOTE: The function in question is only called in GC, and in combination with current userland tools, address translation using DAT does not occur in that function, so the code path that causes this issue will not be executed. However, it is possible to run that code path by intentionally modifying the userland GC library or by calling the GC ioctl directly.
[konishi.ryusuke@gmail.com: NOTE added to the commit log] Link: https://lkml.kernel.org/r/1543201709-53191-1-git-send-email-bianpan2016@163.... Link: https://lkml.kernel.org/r/20230921141731.10073-1-konishi.ryusuke@gmail.com Fixes: a3d93f709e89 ("nilfs2: block cache for garbage collection") Signed-off-by: Pan Bian bianpan2016@163.com Reported-by: Ferry Meng mengferry@linux.alibaba.com Closes: https://lkml.kernel.org/r/20230818092022.111054-1-mengferry@linux.alibaba.co... Signed-off-by: Ryusuke Konishi konishi.ryusuke@gmail.com Tested-by: Ryusuke Konishi konishi.ryusuke@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/nilfs2/gcinode.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/nilfs2/gcinode.c +++ b/fs/nilfs2/gcinode.c @@ -73,10 +73,8 @@ int nilfs_gccache_submit_read_data(struc struct the_nilfs *nilfs = inode->i_sb->s_fs_info;
err = nilfs_dat_translate(nilfs->ns_dat, vbn, &pbn); - if (unlikely(err)) { /* -EIO, -ENOMEM, -ENOENT */ - brelse(bh); + if (unlikely(err)) /* -EIO, -ENOMEM, -ENOENT */ goto failed; - } }
lock_buffer(bh); @@ -102,6 +100,8 @@ int nilfs_gccache_submit_read_data(struc failed: unlock_page(bh->b_page); put_page(bh->b_page); + if (unlikely(err)) + brelse(bh); return err; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
[ Upstream commit f15f29fd4779be8a418b66e9d52979bb6d6c2325 ]
Chain binding only requires the rule addition/insertion command within the same transaction. Removal of rules from chain bindings within the same transaction makes no sense, userspace does not utilize this feature. Replace nft_chain_is_bound() check to nft_chain_binding() in rule deletion commands. Replace command implies a rule deletion, reject this command too.
Rule flush command can also safely rely on this nft_chain_binding() check because unbound chains are not allowed since 62e1e94b246e ("netfilter: nf_tables: reject unbound chain set before commit phase").
Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING") Reported-by: Kevin Rich kevinrich1337@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 1d6a37430ff6b..52b81dc1fcf5b 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -1427,7 +1427,7 @@ static int nft_flush_table(struct nft_ctx *ctx) if (!nft_is_active_next(ctx->net, chain)) continue;
- if (nft_chain_is_bound(chain)) + if (nft_chain_binding(chain)) continue;
ctx->chain = chain; @@ -1471,7 +1471,7 @@ static int nft_flush_table(struct nft_ctx *ctx) if (!nft_is_active_next(ctx->net, chain)) continue;
- if (nft_chain_is_bound(chain)) + if (nft_chain_binding(chain)) continue;
ctx->chain = chain; @@ -2792,6 +2792,9 @@ static int nf_tables_delchain(struct sk_buff *skb, const struct nfnl_info *info, return PTR_ERR(chain); }
+ if (nft_chain_binding(chain)) + return -EOPNOTSUPP; + if (info->nlh->nlmsg_flags & NLM_F_NONREC && chain->use > 0) return -EBUSY; @@ -3771,6 +3774,11 @@ static int nf_tables_newrule(struct sk_buff *skb, const struct nfnl_info *info, }
if (info->nlh->nlmsg_flags & NLM_F_REPLACE) { + if (nft_chain_binding(chain)) { + err = -EOPNOTSUPP; + goto err_destroy_flow_rule; + } + err = nft_delrule(&ctx, old_rule); if (err < 0) goto err_destroy_flow_rule; @@ -3874,7 +3882,7 @@ static int nf_tables_delrule(struct sk_buff *skb, const struct nfnl_info *info, NL_SET_BAD_ATTR(extack, nla[NFTA_RULE_CHAIN]); return PTR_ERR(chain); } - if (nft_chain_is_bound(chain)) + if (nft_chain_binding(chain)) return -EOPNOTSUPP; }
@@ -3904,7 +3912,7 @@ static int nf_tables_delrule(struct sk_buff *skb, const struct nfnl_info *info, list_for_each_entry(chain, &table->chains, list) { if (!nft_is_active_next(net, chain)) continue; - if (nft_chain_is_bound(chain)) + if (nft_chain_binding(chain)) continue;
ctx.chain = chain; @@ -10664,7 +10672,7 @@ static void __nft_release_table(struct net *net, struct nft_table *table) ctx.family = table->family; ctx.table = table; list_for_each_entry(chain, &table->chains, list) { - if (nft_chain_is_bound(chain)) + if (nft_chain_binding(chain)) continue;
ctx.chain = chain;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kailang Yang kailang@realtek.com
commit 057a28ef93bdbe84326d34cdb5543afdaab49fe1 upstream.
Lenovo ThinkCentre M70q had boot up pop noise. Disable power save will solve pop issue.
Signed-off-by: Kailang Yang kailang@realtek.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/315900e2efef42fd9855eacfeb443abd@realtek.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/hda_intel.c | 1 + 1 file changed, 1 insertion(+)
--- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2208,6 +2208,7 @@ static const struct snd_pci_quirk power_ SND_PCI_QUIRK(0x8086, 0x2068, "Intel NUC7i3BNB", 0), /* https://bugzilla.kernel.org/show_bug.cgi?id=198611 */ SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0), + SND_PCI_QUIRK(0x17aa, 0x316e, "Lenovo ThinkCentre M70q", 0), /* https://bugzilla.redhat.com/show_bug.cgi?id=1689623 */ SND_PCI_QUIRK(0x17aa, 0x367b, "Lenovo IdeaCentre B550", 0), /* https://bugzilla.redhat.com/show_bug.cgi?id=1572975 */
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tiezhu Yang yangtiezhu@loongson.cn
commit 2761498876adebff77a43574639005b29e912c43 upstream.
The relocation types from 101 to 109 are used by GNU binutils >= 2.41, add their definitions to use them in later patches.
Link: https://sourceware.org/git/?p=binutils-gdb.git%3Ba=blob%3Bf=include/elf/loon... Cc: stable@vger.kernel.org Signed-off-by: Tiezhu Yang yangtiezhu@loongson.cn Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/loongarch/include/asm/elf.h | 9 +++++++++ arch/loongarch/kernel/module.c | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-)
--- a/arch/loongarch/include/asm/elf.h +++ b/arch/loongarch/include/asm/elf.h @@ -111,6 +111,15 @@ #define R_LARCH_TLS_GD_HI20 98 #define R_LARCH_32_PCREL 99 #define R_LARCH_RELAX 100 +#define R_LARCH_DELETE 101 +#define R_LARCH_ALIGN 102 +#define R_LARCH_PCREL20_S2 103 +#define R_LARCH_CFA 104 +#define R_LARCH_ADD6 105 +#define R_LARCH_SUB6 106 +#define R_LARCH_ADD_ULEB128 107 +#define R_LARCH_SUB_ULEB128 108 +#define R_LARCH_64_PCREL 109
#ifndef ELF_ARCH
--- a/arch/loongarch/kernel/module.c +++ b/arch/loongarch/kernel/module.c @@ -376,7 +376,7 @@ typedef int (*reloc_rela_handler)(struct
/* The handlers for known reloc types */ static reloc_rela_handler reloc_rela_handlers[] = { - [R_LARCH_NONE ... R_LARCH_RELAX] = apply_r_larch_error, + [R_LARCH_NONE ... R_LARCH_64_PCREL] = apply_r_larch_error,
[R_LARCH_NONE] = apply_r_larch_none, [R_LARCH_32] = apply_r_larch_32,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huacai Chen chenhuacai@loongson.cn
commit 1943feecf80e73ecc03ce40271f29c6cea142bac upstream.
For 64bit kernel without HIGHMEM, high_memory is the virtual address of the highest physical address in the system. But __va(get_num_physpages() << PAGE_SHIFT) is not what we want for high_memory because there may be holes in the physical address space. On the other hand, max_low_pfn is calculated from memblock_end_of_DRAM(), which is exactly corresponding to the highest physical address, so use it for high_memory calculation.
Cc: stable@vger.kernel.org Fixes: d4b6f1562a3c3284adce ("LoongArch: Add Non-Uniform Memory Access (NUMA) support") Signed-off-by: Chong Qiao qiaochong@loongson.cn Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/loongarch/kernel/numa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/loongarch/kernel/numa.c +++ b/arch/loongarch/kernel/numa.c @@ -453,7 +453,7 @@ void __init paging_init(void)
void __init mem_init(void) { - high_memory = (void *) __va(get_num_physpages() << PAGE_SHIFT); + high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT); memblock_free_all(); setup_zero_pages(); /* This comes from node 0 */ }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Damien Le Moal dlemoal@kernel.org
commit fb99ef17865035a6657786d4b2af11a27ba23f9b upstream.
There is no direct device ancestry defined between an ata_device and its scsi device which prevents the power management code from correctly ordering suspend and resume operations. Create such ancestry with the ata device as the parent to ensure that the scsi device (child) is suspended before the ata device and that resume handles the ata device before the scsi device.
The parent-child (supplier-consumer) relationship is established between the ata_port (parent) and the scsi device (child) with the function device_add_link(). The parent used is not the ata_device as the PM operations are defined per port and the status of all devices connected through that port is controlled from the port operations.
The device link is established with the new function ata_scsi_slave_alloc(), and this function is used to define the ->slave_alloc callback of the scsi host template of all ata drivers.
Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal dlemoal@kernel.org Reviewed-by: Hannes Reinecke hare@suse.de Reviewed-by: Niklas Cassel niklas.cassel@wdc.com Tested-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Martin K. Petersen martin.petersen@oracle.com Reviewed-by: John Garry john.g.garry@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/libata-scsi.c | 45 ++++++++++++++++++++++++++++++++++++++++----- include/linux/libata.h | 2 ++ 2 files changed, 42 insertions(+), 5 deletions(-)
--- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1114,6 +1114,42 @@ int ata_scsi_dev_config(struct scsi_devi }
/** + * ata_scsi_slave_alloc - Early setup of SCSI device + * @sdev: SCSI device to examine + * + * This is called from scsi_alloc_sdev() when the scsi device + * associated with an ATA device is scanned on a port. + * + * LOCKING: + * Defined by SCSI layer. We don't really care. + */ + +int ata_scsi_slave_alloc(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct device_link *link; + + ata_scsi_sdev_config(sdev); + + /* + * Create a link from the ata_port device to the scsi device to ensure + * that PM does suspend/resume in the correct order: the scsi device is + * consumer (child) and the ata port the supplier (parent). + */ + link = device_link_add(&sdev->sdev_gendev, &ap->tdev, + DL_FLAG_STATELESS | + DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE); + if (!link) { + ata_port_err(ap, "Failed to create link to scsi device %s\n", + dev_name(&sdev->sdev_gendev)); + return -ENODEV; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ata_scsi_slave_alloc); + +/** * ata_scsi_slave_config - Set SCSI device attributes * @sdev: SCSI device to examine * @@ -1129,14 +1165,11 @@ int ata_scsi_slave_config(struct scsi_de { struct ata_port *ap = ata_shost_to_port(sdev->host); struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); - int rc = 0; - - ata_scsi_sdev_config(sdev);
if (dev) - rc = ata_scsi_dev_config(sdev, dev); + return ata_scsi_dev_config(sdev, dev);
- return rc; + return 0; } EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
@@ -1163,6 +1196,8 @@ void ata_scsi_slave_destroy(struct scsi_ if (!ap->ops->error_handler) return;
+ device_link_remove(&sdev->sdev_gendev, &ap->tdev); + spin_lock_irqsave(ap->lock, flags); dev = __ata_scsi_find_dev(ap, sdev); if (dev && dev->sdev) { --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1136,6 +1136,7 @@ extern int ata_std_bios_param(struct scs struct block_device *bdev, sector_t capacity, int geom[]); extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev); +extern int ata_scsi_slave_alloc(struct scsi_device *sdev); extern int ata_scsi_slave_config(struct scsi_device *sdev); extern void ata_scsi_slave_destroy(struct scsi_device *sdev); extern int ata_scsi_change_queue_depth(struct scsi_device *sdev, @@ -1384,6 +1385,7 @@ extern const struct attribute_group *ata .this_id = ATA_SHT_THIS_ID, \ .emulated = ATA_SHT_EMULATED, \ .proc_name = drv_name, \ + .slave_alloc = ata_scsi_slave_alloc, \ .slave_destroy = ata_scsi_slave_destroy, \ .bios_param = ata_std_bios_param, \ .unlock_native_capacity = ata_scsi_unlock_native_capacity,\
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Niklas Cassel niklas.cassel@wdc.com
commit 3ef600923521616ebe192c893468ad0424de2afb upstream.
For REPORT SUPPORTED OPERATION CODES command, the service action field is defined as bits 0-4 in the second byte in the CDB. Bits 5-7 in the second byte are reserved.
Only look at the service action field in the second byte when determining if the MAINTENANCE IN opcode is a REPORT SUPPORTED OPERATION CODES command.
This matches how we only look at the service action field in the second byte when determining if the SERVICE ACTION IN(16) opcode is a READ CAPACITY(16) command (reserved bits 5-7 in the second byte are ignored).
Fixes: 7b2030942859 ("libata: Add support for SCT Write Same") Cc: stable@vger.kernel.org Signed-off-by: Niklas Cassel niklas.cassel@wdc.com Signed-off-by: Damien Le Moal dlemoal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/libata-scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -4227,7 +4227,7 @@ void ata_scsi_simulate(struct ata_device break;
case MAINTENANCE_IN: - if (scsicmd[1] == MI_REPORT_SUPPORTED_OPERATION_CODES) + if ((scsicmd[1] & 0x1f) == MI_REPORT_SUPPORTED_OPERATION_CODES) ata_scsi_rbuf_fill(&args, ata_scsiop_maint_in); else ata_scsi_set_invalid_field(dev, cmd, 1, 0xff);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jens Axboe axboe@kernel.dk
commit a52d4f657568d6458e873f74a9602e022afe666f upstream.
This is unionized with the actual link flags, so they can of course be set and they will be evaluated further down. If not we fail any LINKAT that has to set option flags.
Fixes: cf30da90bc3a ("io_uring: add support for IORING_OP_LINKAT") Cc: stable@vger.kernel.org Reported-by: Thomas Leonard talex5@gmail.com Link: https://github.com/axboe/liburing/issues/955 Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- io_uring/fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/io_uring/fs.c +++ b/io_uring/fs.c @@ -243,7 +243,7 @@ int io_linkat_prep(struct io_kiocb *req, struct io_link *lnk = io_kiocb_to_cmd(req, struct io_link); const char __user *oldf, *newf;
- if (sqe->rw_flags || sqe->buf_index || sqe->splice_fd_in) + if (sqe->buf_index || sqe->splice_fd_in) return -EINVAL; if (unlikely(req->flags & REQ_F_FIXED_FILE)) return -EBADF;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiner Kallweit hkallweit1@gmail.com
commit 3914784553f68c931fc666dbe7e86fe881aada38 upstream.
We have to unregister tco_pdev also if i2c_add_adapter() fails.
Fixes: 9424693035a5 ("i2c: i801: Create iTCO device on newer Intel PCHs") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit hkallweit1@gmail.com Reviewed-by: Mika Westerberg mika.westerberg@linux.intel.com Reviewed-by: Jean Delvare jdelvare@suse.de Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/i2c/busses/i2c-i801.c | 1 + 1 file changed, 1 insertion(+)
--- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1754,6 +1754,7 @@ static int i801_probe(struct pci_dev *de "SMBus I801 adapter at %04lx", priv->smba); err = i2c_add_adapter(&priv->adapter); if (err) { + platform_device_unregister(priv->tco_pdev); i801_acpi_remove(priv); return err; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: August Wikerfors git@augustwikerfors.se
commit 1263cc0f414d212129c0f1289b49b7df77f92084 upstream.
Like the Lenovo 82TL and 82V2, the Lenovo 82QF (Yoga 7 14ARB7) and 82UG (Legion S7 16ARHA7) both need a quirk entry for the internal microphone to function. Commit c008323fe361 ("ASoC: amd: yc: Fix a non-functional mic on Lenovo 82SJ") restricted the quirk that previously matched "82" to "82V2", breaking microphone functionality on these devices. Fix this by adding specific quirks for these models, as was done for the Lenovo 82TL.
Fixes: c008323fe361 ("ASoC: amd: yc: Fix a non-functional mic on Lenovo 82SJ") Closes: https://github.com/tomsom/yoga-linux/issues/51 Link: https://bugzilla.kernel.org/show_bug.cgi?id=208555#c780 Cc: stable@vger.kernel.org Signed-off-by: August Wikerfors git@augustwikerfors.se Link: https://lore.kernel.org/r/20230911213409.6106-1-git@augustwikerfors.se Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/amd/yc/acp6x-mach.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
--- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -217,10 +217,24 @@ static const struct dmi_system_id yc_acp .driver_data = &acp6x_card, .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "82QF"), + } + }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), DMI_MATCH(DMI_PRODUCT_NAME, "82V2"), } }, { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "82UG"), + } + }, + { .driver_data = &acp6x_card, .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK COMPUTER INC."),
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liam R. Howlett Liam.Howlett@oracle.com
commit cff9b2332ab762b7e0586c793c431a8f2ea4db04 upstream.
Initial booting is setting the task flag to idle (PF_IDLE) by the call path sched_init() -> init_idle(). Having the task idle and calling call_rcu() in kernel/rcu/tiny.c means that TIF_NEED_RESCHED will be set. Subsequent calls to any cond_resched() will enable IRQs, potentially earlier than the IRQ setup has completed. Recent changes have caused just this scenario and IRQs have been enabled early.
This causes a warning later in start_kernel() as interrupts are enabled before they are fully set up.
Fix this issue by setting the PF_IDLE flag later in the boot sequence.
Although the boot task was marked as idle since (at least) d80e4fda576d, I am not sure that it is wrong to do so. The forced context-switch on idle task was introduced in the tiny_rcu update, so I'm going to claim this fixes 5f6130fa52ee.
Fixes: 5f6130fa52ee ("tiny_rcu: Directly force QS when call_rcu_[bh|sched]() on idle_task") Signed-off-by: Liam R. Howlett Liam.Howlett@oracle.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mm/CAMuHMdWpvpWoDa=Ox-do92czYRvkok6_x6pYUH+Zou... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/sched/core.c | 2 +- kernel/sched/idle.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)
--- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -9019,7 +9019,7 @@ void __init init_idle(struct task_struct * PF_KTHREAD should already be set at this point; regardless, make it * look like a proper per-CPU kthread. */ - idle->flags |= PF_IDLE | PF_KTHREAD | PF_NO_SETAFFINITY; + idle->flags |= PF_KTHREAD | PF_NO_SETAFFINITY; kthread_set_per_cpu(idle, cpu);
#ifdef CONFIG_SMP --- a/kernel/sched/idle.c +++ b/kernel/sched/idle.c @@ -394,6 +394,7 @@ EXPORT_SYMBOL_GPL(play_idle_precise);
void cpu_startup_entry(enum cpuhp_state state) { + current->flags |= PF_IDLE; arch_cpu_idle_prepare(); cpuhp_online_idle(state); while (1)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joel Fernandes (Google) joel@joelfernandes.org
commit fc09027786c900368de98d03d40af058bcb01ad9 upstream.
During RCU-boost testing with the TREE03 rcutorture config, I found that after a few hours, the machine locks up.
On tracing, I found that there is a live lock happening between 2 CPUs. One CPU has an RT task running, while another CPU is being offlined which also has an RT task running. During this offlining, all threads are migrated. The migration thread is repeatedly scheduled to migrate actively running tasks on the CPU being offlined. This results in a live lock because select_fallback_rq() keeps picking the CPU that an RT task is already running on only to get pushed back to the CPU being offlined.
It is anyway pointless to pick CPUs for pushing tasks to if they are being offlined only to get migrated away to somewhere else. This could also add unwanted latency to this task.
Fix these issues by not selecting CPUs in RT if they are not 'active' for scheduling, using the cpu_active_mask. Other parts in core.c already use cpu_active_mask to prevent tasks from being put on CPUs going offline.
With this fix I ran the tests for days and could not reproduce the hang. Without the patch, I hit it in a few hours.
Signed-off-by: Joel Fernandes (Google) joel@joelfernandes.org Signed-off-by: Ingo Molnar mingo@kernel.org Tested-by: Paul E. McKenney paulmck@kernel.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230923011409.3522762-1-joel@joelfernandes.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/sched/cpupri.c | 1 + 1 file changed, 1 insertion(+)
--- a/kernel/sched/cpupri.c +++ b/kernel/sched/cpupri.c @@ -101,6 +101,7 @@ static inline int __cpupri_find(struct c
if (lowest_mask) { cpumask_and(lowest_mask, &p->cpus_mask, vec->mask); + cpumask_and(lowest_mask, lowest_mask, cpu_active_mask);
/* * We have to ensure that we have at least one bit
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal fw@strlen.de
commit 08713cb006b6f07434f276c5ee214fb20c7fd965 upstream.
Jakub Kicinski says: We've got some new kdoc warnings here: net/netfilter/nft_set_pipapo.c:1557: warning: Function parameter or member '_set' not described in 'pipapo_gc' net/netfilter/nft_set_pipapo.c:1557: warning: Excess function parameter 'set' description in 'pipapo_gc' include/net/netfilter/nf_tables.h:577: warning: Function parameter or member 'dead' not described in 'nft_set'
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API") Reported-by: Jakub Kicinski kuba@kernel.org Closes: https://lore.kernel.org/netdev/20230810104638.746e46f1@kernel.org/ Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/net/netfilter/nf_tables.h | 1 + net/netfilter/nft_set_pipapo.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
--- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -529,6 +529,7 @@ struct nft_set_elem_expr { * @expr: stateful expression * @ops: set ops * @flags: set flags + * @dead: set will be freed, never cleared * @genmask: generation mask * @klen: key length * @dlen: data length --- a/net/netfilter/nft_set_pipapo.c +++ b/net/netfilter/nft_set_pipapo.c @@ -1550,7 +1550,7 @@ static void nft_pipapo_gc_deactivate(str
/** * pipapo_gc() - Drop expired entries from set, destroy start and end elements - * @set: nftables API set representation + * @_set: nftables API set representation * @m: Matching data */ static void pipapo_gc(const struct nft_set *_set, struct nft_pipapo_match *m)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust trond.myklebust@hammerspace.com
commit a275ab62606bcd894ddff09460f7d253828313dc upstream.
This reverts commit 88428cc4ae7abcc879295fbb19373dd76aad2bdd.
The problem this commit is intended to fix was comprehensively fixed in commit 7de62bc09fe6 ("SUNRPC dont update timeout value on connection reset"). Since then, this commit has been preventing the correct timeout of soft mounted requests.
Cc: stable@vger.kernel.org # 5.9.x: 09252177d5f9: SUNRPC: Handle major timeout in xprt_adjust_timeout() Cc: stable@vger.kernel.org # 5.9.x: 7de62bc09fe6: SUNRPC dont update timeout value on connection reset Cc: stable@vger.kernel.org # 5.9.x Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/sunrpc/clnt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
--- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -2462,8 +2462,7 @@ call_status(struct rpc_task *task) goto out_exit; } task->tk_action = call_encode; - if (status != -ECONNRESET && status != -ECONNABORTED) - rpc_check_timeout(task); + rpc_check_timeout(task); return; out_exit: rpc_call_rpcerror(task, status);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frederic Weisbecker frederic@kernel.org
commit 1a6a464774947920dcedcf7409be62495c7cedd0 upstream.
Specific stress involving frequent CPU-hotplug operations, such as running rcutorture for example, may trigger the following message:
NOHZ tick-stop error: local softirq work is pending, handler #02!!!"
This happens in the CPU-down hotplug process, after CPUHP_AP_SMPBOOT_THREADS whose teardown callback parks ksoftirqd, and before the target CPU shuts down through CPUHP_AP_IDLE_DEAD. In this fragile intermediate state, softirqs waiting for threaded handling may be forever ignored and eventually reported by the idle task as in the above example.
However some vectors are known to be safe as long as the corresponding subsystems have teardown callbacks handling the migration of their events. The above error message reports pending timers softirq although this vector can be considered as hotplug safe because the CPUHP_TIMERS_PREPARE teardown callback performs the necessary migration of timers after the death of the CPU. Hrtimers also have a similar hotplug handling.
Therefore this error message, as far as (hr-)timers are concerned, can be considered spurious and the relevant softirq vectors can be marked as hotplug safe.
Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") Signed-off-by: Frederic Weisbecker frederic@kernel.org Signed-off-by: Thomas Gleixner tglx@linutronix.de Reviewed-by: Joel Fernandes (Google) joel@joelfernandes.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230912104406.312185-6-frederic@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/interrupt.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
--- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -569,8 +569,12 @@ enum * 2) rcu_report_dead() reports the final quiescent states. * * _ IRQ_POLL: irq_poll_cpu_dead() migrates the queue + * + * _ (HR)TIMER_SOFTIRQ: (hr)timers_dead_cpu() migrates the queue */ -#define SOFTIRQ_HOTPLUG_SAFE_MASK (BIT(RCU_SOFTIRQ) | BIT(IRQ_POLL_SOFTIRQ)) +#define SOFTIRQ_HOTPLUG_SAFE_MASK (BIT(TIMER_SOFTIRQ) | BIT(IRQ_POLL_SOFTIRQ) |\ + BIT(HRTIMER_SOFTIRQ) | BIT(RCU_SOFTIRQ)) +
/* map softirq index to softirq name. update 'softirq_to_name' in * kernel/softirq.c when adding a new softirq.
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Janusz Krzysztofik janusz.krzysztofik@linux.intel.com
commit 2ba157983974ae1b6aaef7d4953812020d6f1eb5 upstream.
While drm_mm test was converted form igt selftest to kunit, unexpected value of "end" argument equal "start" was introduced to one of calls to a function that executes the drm_test_mm_insert_range for specific start/end pair of arguments. As a consequence, DRM_MM_BUG_ON(end <= start) is triggered. Fix it by restoring the original value.
Fixes: fc8d29e298cf ("drm: selftest: convert drm_mm selftest to KUnit") Signed-off-by: Janusz Krzysztofik janusz.krzysztofik@linux.intel.com Cc: "Maíra Canal" mairacanal@riseup.net Cc: Arthur Grillo arthurgrillo@riseup.net Cc: Javier Martinez Canillas javierm@redhat.com Cc: Daniel Latypov dlatypov@google.com Cc: stable@vger.kernel.org # v6.1+ Reviewed-by: Maíra Canal mairacanal@riseup.net Signed-off-by: Maíra Canal mairacanal@riseup.net Link: https://patchwork.freedesktop.org/patch/msgid/20230911130323.7037-2-janusz.k... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/tests/drm_mm_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tests/drm_mm_test.c b/drivers/gpu/drm/tests/drm_mm_test.c index 186b28dc7038..05d5e7af6d25 100644 --- a/drivers/gpu/drm/tests/drm_mm_test.c +++ b/drivers/gpu/drm/tests/drm_mm_test.c @@ -939,7 +939,7 @@ static void drm_test_mm_insert_range(struct kunit *test) KUNIT_ASSERT_FALSE(test, __drm_test_mm_insert_range(test, count, size, 0, max - 1)); KUNIT_ASSERT_FALSE(test, __drm_test_mm_insert_range(test, count, size, 0, max / 2)); KUNIT_ASSERT_FALSE(test, __drm_test_mm_insert_range(test, count, size, - max / 2, max / 2)); + max / 2, max)); KUNIT_ASSERT_FALSE(test, __drm_test_mm_insert_range(test, count, size, max / 4 + 1, 3 * max / 4 - 1));
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikko Rapeli mikko.rapeli@linaro.org
commit 7d3e4e9d3bde9c8bd8914d47ddaa90e0d0ffbcab upstream.
There is no code for this config option and enabling it in defconfig causes warnings from tools which are detecting unused and obsolete kernel config flags since the flag will be completely missing from effective build config after "make olddefconfig".
Fixes yocto kernel recipe build time warning:
WARNING: [kernel config]: This BSP contains fragments with warnings: ... [INFO]: the following symbols were not found in the active configuration: - CONFIG_COMMON_CLK_NPCM8XX
The flag was added with commit 45472f1e5348c7b755b4912f2f529ec81cea044b v5.19-rc4-15-g45472f1e5348 so 6.1 and 6.4 stable kernel trees are affected.
Fixes: 45472f1e5348c7b755b4912f2f529ec81cea044b ("arm64: defconfig: Add Nuvoton NPCM family support") Cc: stable@kernel.org Cc: Catalin Marinas catalin.marinas@arm.com Cc: Will Deacon will@kernel.org Cc: Bjorn Andersson quic_bjorande@quicinc.com Cc: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Cc: Konrad Dybcio konrad.dybcio@linaro.org Cc: Neil Armstrong neil.armstrong@linaro.org Cc: Tomer Maimon tmaimon77@gmail.com Cc: Bruce Ashfield bruce.ashfield@gmail.com Cc: Jon Mason jon.mason@arm.com Cc: Jon Mason jdmason@kudzu.us Cc: Ross Burton ross@burtonini.com Cc: Arnd Bergmann arnd@arndb.de Signed-off-by: Mikko Rapeli mikko.rapeli@linaro.org Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/configs/defconfig | 1 - 1 file changed, 1 deletion(-)
--- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -1050,7 +1050,6 @@ CONFIG_COMMON_CLK_FSL_SAI=y CONFIG_COMMON_CLK_S2MPS11=y CONFIG_COMMON_CLK_PWM=y CONFIG_COMMON_CLK_VC5=y -CONFIG_COMMON_CLK_NPCM8XX=y CONFIG_COMMON_CLK_BD718XX=m CONFIG_CLK_RASPBERRYPI=m CONFIG_CLK_IMX8MM=y
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jinjie Ruan ruanjinjie@huawei.com
commit 45120b15743fa7c0aa53d5db6dfb4c8f87be4abd upstream.
When CONFIG_DAMON_VADDR_KUNIT_TEST=y and making CONFIG_DEBUG_KMEMLEAK=y and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the below memory leak is detected.
Since commit 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary variables"), the damon_destroy_ctx() is removed, but still call damon_new_target() and damon_new_region(), the damon_region which is allocated by kmem_cache_alloc() in damon_new_region() and the damon_target which is allocated by kmalloc in damon_new_target() are not freed. And the damon_region which is allocated in damon_new_region() in damon_set_regions() is also not freed.
So use damon_destroy_target to free all the damon_regions and damon_target.
unreferenced object 0xffff888107c9a940 (size 64): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk 60 c7 9c 07 81 88 ff ff f8 cb 9c 07 81 88 ff ff `............... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079cc740 (size 56): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888107c9ac40 (size 64): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk a0 cc 9c 07 81 88 ff ff 78 a1 76 07 81 88 ff ff ........x.v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079ccc80 (size 56): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888107c9af40 (size 64): comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.011s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk 20 a2 76 07 81 88 ff ff b8 a6 76 07 81 88 ff ff .v.......v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff88810776a200 (size 56): comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.011s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff88810776a740 (size 56): comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.025s) hex dump (first 32 bytes): 3d 00 00 00 00 00 00 00 3f 00 00 00 00 00 00 00 =.......?....... 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819bfcc2>] damon_set_regions+0x4c2/0x8e0 [<ffffffff819c7dbb>] damon_do_test_apply_three_regions.constprop.0+0xfb/0x3e0 [<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888108038240 (size 64): comm "kunit_try_catch", pid 1075, jiffies 4294670600 (age 733.022s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 03 00 00 00 6b 6b 6b 6b ............kkkk 48 ad 76 07 81 88 ff ff 98 ae 76 07 81 88 ff ff H.v.......v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c898d>] damon_test_apply_three_regions4+0x1cd/0x210 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff88810776ad28 (size 56): comm "kunit_try_catch", pid 1075, jiffies 4294670600 (age 733.022s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819bfcc2>] damon_set_regions+0x4c2/0x8e0 [<ffffffff819c7dbb>] damon_do_test_apply_three_regions.constprop.0+0xfb/0x3e0 [<ffffffff819c898d>] damon_test_apply_three_regions4+0x1cd/0x210 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
Link: https://lkml.kernel.org/r/20230925072100.3725620-1-ruanjinjie@huawei.com Fixes: 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary variables") Signed-off-by: Jinjie Ruan ruanjinjie@huawei.com Reviewed-by: SeongJae Park sj@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/damon/vaddr-test.h | 2 ++ 1 file changed, 2 insertions(+)
--- a/mm/damon/vaddr-test.h +++ b/mm/damon/vaddr-test.h @@ -140,6 +140,8 @@ static void damon_do_test_apply_three_re KUNIT_EXPECT_EQ(test, r->ar.start, expected[i * 2]); KUNIT_EXPECT_EQ(test, r->ar.end, expected[i * 2 + 1]); } + + damon_destroy_target(t); }
/*
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rafael Aquini aquini@redhat.com
commit 46a9ea6681907a3be6b6b0d43776dccc62cad6cf upstream.
After the commit in Fixes:, if a module that created a slab cache does not release all of its allocated objects before destroying the cache (at rmmod time), we might end up releasing the kmem_cache object without removing it from the slab_caches list thus corrupting the list as kmem_cache_destroy() ignores the return value from shutdown_cache(), which in turn never removes the kmem_cache object from slabs_list in case __kmem_cache_shutdown() fails to release all of the cache's slabs.
This is easily observable on a kernel built with CONFIG_DEBUG_LIST=y as after that ill release the system will immediately trip on list_add, or list_del, assertions similar to the one shown below as soon as another kmem_cache gets created, or destroyed:
[ 1041.213632] list_del corruption. next->prev should be ffff89f596fb5768, but was 52f1e5016aeee75d. (next=ffff89f595a1b268) [ 1041.219165] ------------[ cut here ]------------ [ 1041.221517] kernel BUG at lib/list_debug.c:62! [ 1041.223452] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 1041.225408] CPU: 2 PID: 1852 Comm: rmmod Kdump: loaded Tainted: G B W OE 6.5.0 #15 [ 1041.228244] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023 [ 1041.231212] RIP: 0010:__list_del_entry_valid+0xae/0xb0
Another quick way to trigger this issue, in a kernel with CONFIG_SLUB=y, is to set slub_debug to poison the released objects and then just run cat /proc/slabinfo after removing the module that leaks slab objects, in which case the kernel will panic:
[ 50.954843] general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 [#1] PREEMPT SMP PTI [ 50.961545] CPU: 2 PID: 1495 Comm: cat Kdump: loaded Tainted: G B W OE 6.5.0 #15 [ 50.966808] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023 [ 50.972663] RIP: 0010:get_slabinfo+0x42/0xf0
This patch fixes this issue by properly checking shutdown_cache()'s return value before taking the kmem_cache_release() branch.
Fixes: 0495e337b703 ("mm/slab_common: Deleting kobject in kmem_cache_destroy() without holding slab_mutex/cpu_hotplug_lock") Signed-off-by: Rafael Aquini aquini@redhat.com Cc: stable@vger.kernel.org Reviewed-by: Waiman Long longman@redhat.com Signed-off-by: Vlastimil Babka vbabka@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/slab_common.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
--- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -474,7 +474,7 @@ void slab_kmem_cache_release(struct kmem
void kmem_cache_destroy(struct kmem_cache *s) { - int refcnt; + int err = -EBUSY; bool rcu_set;
if (unlikely(!s) || !kasan_check_byte(s)) @@ -485,17 +485,17 @@ void kmem_cache_destroy(struct kmem_cach
rcu_set = s->flags & SLAB_TYPESAFE_BY_RCU;
- refcnt = --s->refcount; - if (refcnt) + s->refcount--; + if (s->refcount) goto out_unlock;
- WARN(shutdown_cache(s), - "%s %s: Slab cache still has objects when called from %pS", + err = shutdown_cache(s); + WARN(err, "%s %s: Slab cache still has objects when called from %pS", __func__, s->name, (void *)_RET_IP_); out_unlock: mutex_unlock(&slab_mutex); cpus_read_unlock(); - if (!refcnt && !rcu_set) + if (!err && !rcu_set) kmem_cache_release(s); } EXPORT_SYMBOL(kmem_cache_destroy);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Weiner hannes@cmpxchg.org
commit 9ea9cb00a82b53ec39630eac718776d37e41b35a upstream.
Breno and Josef report a deadlock scenario from cgroup reclaim re-entering the filesystem:
[ 361.546690] ====================================================== [ 361.559210] WARNING: possible circular locking dependency detected [ 361.571703] 6.5.0-0_fbk700_debug_rc0_kbuilder_13159_gbf787a128001 #1 Tainted: G S E [ 361.589704] ------------------------------------------------------ [ 361.602277] find/9315 is trying to acquire lock: [ 361.611625] ffff88837ba140c0 (&delayed_node->mutex){+.+.}-{4:4}, at: __btrfs_release_delayed_node+0x68/0x4f0 [ 361.631437] [ 361.631437] but task is already holding lock: [ 361.643243] ffff8881765b8678 (btrfs-tree-01){++++}-{4:4}, at: btrfs_tree_read_lock+0x1e/0x40
[ 362.904457] mutex_lock_nested+0x1c/0x30 [ 362.912414] __btrfs_release_delayed_node+0x68/0x4f0 [ 362.922460] btrfs_evict_inode+0x301/0x770 [ 362.982726] evict+0x17c/0x380 [ 362.988944] prune_icache_sb+0x100/0x1d0 [ 363.005559] super_cache_scan+0x1f8/0x260 [ 363.013695] do_shrink_slab+0x2a2/0x540 [ 363.021489] shrink_slab_memcg+0x237/0x3d0 [ 363.050606] shrink_slab+0xa7/0x240 [ 363.083382] shrink_node_memcgs+0x262/0x3b0 [ 363.091870] shrink_node+0x1a4/0x720 [ 363.099150] shrink_zones+0x1f6/0x5d0 [ 363.148798] do_try_to_free_pages+0x19b/0x5e0 [ 363.157633] try_to_free_mem_cgroup_pages+0x266/0x370 [ 363.190575] reclaim_high+0x16f/0x1f0 [ 363.208409] mem_cgroup_handle_over_high+0x10b/0x270 [ 363.246678] try_charge_memcg+0xaf2/0xc70 [ 363.304151] charge_memcg+0xf0/0x350 [ 363.320070] __mem_cgroup_charge+0x28/0x40 [ 363.328371] __filemap_add_folio+0x870/0xd50 [ 363.371303] filemap_add_folio+0xdd/0x310 [ 363.399696] __filemap_get_folio+0x2fc/0x7d0 [ 363.419086] pagecache_get_page+0xe/0x30 [ 363.427048] alloc_extent_buffer+0x1cd/0x6a0 [ 363.435704] read_tree_block+0x43/0xc0 [ 363.443316] read_block_for_search+0x361/0x510 [ 363.466690] btrfs_search_slot+0xc8c/0x1520
This is caused by the mem_cgroup_handle_over_high() not respecting the gfp_mask of the allocation context. We used to only call this function on resume to userspace, where no locks were held. But c9afe31ec443 ("memcg: synchronously enforce memory.high for large overcharges") added a call from the allocation context without considering the gfp.
Link: https://lkml.kernel.org/r/20230914152139.100822-1-hannes@cmpxchg.org Fixes: c9afe31ec443 ("memcg: synchronously enforce memory.high for large overcharges") Signed-off-by: Johannes Weiner hannes@cmpxchg.org Reported-by: Breno Leitao leitao@debian.org Reported-by: Josef Bacik josef@toxicpanda.com Acked-by: Shakeel Butt shakeelb@google.com Acked-by: Michal Hocko mhocko@suse.com Cc: Roman Gushchin roman.gushchin@linux.dev Cc: Muchun Song songmuchun@bytedance.com Cc: stable@vger.kernel.org [5.17+] Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/memcontrol.h | 4 ++-- include/linux/resume_user_mode.h | 2 +- mm/memcontrol.c | 6 +++--- 3 files changed, 6 insertions(+), 6 deletions(-)
--- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -902,7 +902,7 @@ unsigned long mem_cgroup_get_zone_lru_si return READ_ONCE(mz->lru_zone_size[zone_idx][lru]); }
-void mem_cgroup_handle_over_high(void); +void mem_cgroup_handle_over_high(gfp_t gfp_mask);
unsigned long mem_cgroup_get_max(struct mem_cgroup *memcg);
@@ -1437,7 +1437,7 @@ static inline void mem_cgroup_unlock_pag rcu_read_unlock(); }
-static inline void mem_cgroup_handle_over_high(void) +static inline void mem_cgroup_handle_over_high(gfp_t gfp_mask) { }
--- a/include/linux/resume_user_mode.h +++ b/include/linux/resume_user_mode.h @@ -55,7 +55,7 @@ static inline void resume_user_mode_work } #endif
- mem_cgroup_handle_over_high(); + mem_cgroup_handle_over_high(GFP_KERNEL); blkcg_maybe_throttle_current();
rseq_handle_notify_resume(NULL, regs); --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -2545,7 +2545,7 @@ static unsigned long calculate_high_dela * Scheduled by try_charge() to be executed from the userland return path * and reclaims memory over the high limit. */ -void mem_cgroup_handle_over_high(void) +void mem_cgroup_handle_over_high(gfp_t gfp_mask) { unsigned long penalty_jiffies; unsigned long pflags; @@ -2573,7 +2573,7 @@ retry_reclaim: */ nr_reclaimed = reclaim_high(memcg, in_retry ? SWAP_CLUSTER_MAX : nr_pages, - GFP_KERNEL); + gfp_mask);
/* * memory.high is breached and reclaim is unable to keep up. Throttle @@ -2809,7 +2809,7 @@ done_restock: if (current->memcg_nr_pages_over_high > MEMCG_CHARGE_BATCH && !(current->flags & PF_MEMALLOC) && gfpflags_allow_blocking(gfp_mask)) { - mem_cgroup_handle_over_high(); + mem_cgroup_handle_over_high(gfp_mask); } return 0; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (Google) rostedt@goodmis.org
commit 1e0cb399c7653462d9dadf8ab9425337c355d358 upstream.
It was discovered that the ring buffer polling was incorrectly stating that read would not block, but that's because polling did not take into account that reads will block if the "buffer-percent" was set. Instead, the ring buffer polling would say reads would not block if there was any data in the ring buffer. This was incorrect behavior from a user space point of view. This was fixed by commit 42fb0a1e84ff by having the polling code check if the ring buffer had more data than what the user specified "buffer percent" had.
The problem now is that the polling code did not register itself to the writer that it wanted to wait for a specific "full" value of the ring buffer. The result was that the writer would wake the polling waiter whenever there was a new event. The polling waiter would then wake up, see that there's not enough data in the ring buffer to notify user space and then go back to sleep. The next event would wake it up again.
Before the polling fix was added, the code would wake up around 100 times for a hackbench 30 benchmark. After the "fix", due to the constant waking of the writer, it would wake up over 11,0000 times! It would never leave the kernel, so the user space behavior was still "correct", but this definitely is not the desired effect.
To fix this, have the polling code add what it's waiting for to the "shortest_full" variable, to tell the writer not to wake it up if the buffer is not as full as it expects to be.
Note, after this fix, it appears that the waiter is now woken up around 2x the times it was before (~200). This is a tremendous improvement from the 11,000 times, but I will need to spend some time to see why polling is more aggressive in its wakeups than the read blocking code.
Link: https://lore.kernel.org/linux-trace-kernel/20230929180113.01c2cae3@rorschach...
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu mhiramat@kernel.org Cc: Mark Rutland mark.rutland@arm.com Fixes: 42fb0a1e84ff ("tracing/ring-buffer: Have polling block on watermark") Reported-by: Julia Lawall julia.lawall@inria.fr Tested-by: Julia Lawall julia.lawall@inria.fr Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/trace/ring_buffer.c | 3 +++ 1 file changed, 3 insertions(+)
--- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1142,6 +1142,9 @@ __poll_t ring_buffer_poll_wait(struct tr if (full) { poll_wait(filp, &work->full_waiters, poll_table); work->full_waiters_pending = true; + if (!cpu_buffer->shortest_full || + cpu_buffer->shortest_full > full) + cpu_buffer->shortest_full = full; } else { poll_wait(filp, &work->waiters, poll_table); work->waiters_pending = true;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josef Bacik josef@toxicpanda.com
commit 58bfe2ccec5f9f137b41dd38f335290dcc13cd5c upstream.
A user reported some issues with smaller file systems that get very full. While investigating this issue I noticed that df wasn't showing 100% full, despite having 0 chunk space and having < 1MiB of available metadata space.
This turns out to be an overflow issue, we're doing:
total_available_metadata_space - SZ_4M < global_block_rsv_size
to determine if there's not enough space to make metadata allocations, which overflows if total_available_metadata_space is < 4M. Fix this by checking to see if our available space is greater than the 4M threshold. This makes df properly report 100% usage on the file system.
CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Josef Bacik josef@toxicpanda.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/btrfs/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -2418,7 +2418,7 @@ static int btrfs_statfs(struct dentry *d * calculated f_bavail. */ if (!mixed && block_rsv->space_info->full && - total_free_meta - thresh < block_rsv->size) + (total_free_meta < thresh || total_free_meta - thresh < block_rsv->size)) buf->f_bavail = 0;
buf->f_type = BTRFS_SUPER_MAGIC;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ricardo Ribalda ribalda@chromium.org
commit 41ebaa5e0eebea4c3bac96b72f9f8ae0d77c0bdb upstream.
If the index provided by the user is bigger than the mask size, we might do an out of bound read.
CC: stable@kernel.org Fixes: 40140eda661e ("media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU") Reported-by: Zubin Mithra zsm@chromium.org Signed-off-by: Ricardo Ribalda ribalda@chromium.org Reviewed-by: Sergey Senozhatsky senozhatsky@chromium.org Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/usb/uvc/uvc_ctrl.c | 3 +++ 1 file changed, 3 insertions(+)
--- a/drivers/media/usb/uvc/uvc_ctrl.c +++ b/drivers/media/usb/uvc/uvc_ctrl.c @@ -1347,6 +1347,9 @@ int uvc_query_v4l2_menu(struct uvc_video query_menu->id = id; query_menu->index = index;
+ if (index >= BITS_PER_TYPE(mapping->menu_mask)) + return -EINVAL; + ret = mutex_lock_interruptible(&chain->ctrl_mutex); if (ret < 0) return -ERESTARTSYS;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Olsa jolsa@kernel.org
commit 41bc46c12a8053a1b3279a379bd6b5e87b045b85 upstream.
Currently the multi_kprobe link attach does not check error injection list for programs with bpf_override_return helper and allows them to attach anywhere. Adding the missing check.
Fixes: 0dcac2725406 ("bpf: Add multi kprobe link") Signed-off-by: Jiri Olsa jolsa@kernel.org Signed-off-by: Andrii Nakryiko andrii@kernel.org Reviewed-by: Alan Maguire alan.maguire@oracle.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20230907200652.926951-1-jolsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/trace/bpf_trace.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
--- a/kernel/trace/bpf_trace.c +++ b/kernel/trace/bpf_trace.c @@ -2684,6 +2684,17 @@ static void symbols_swap_r(void *a, void } }
+static int addrs_check_error_injection_list(unsigned long *addrs, u32 cnt) +{ + u32 i; + + for (i = 0; i < cnt; i++) { + if (!within_error_injection_list(addrs[i])) + return -EINVAL; + } + return 0; +} + int bpf_kprobe_multi_link_attach(const union bpf_attr *attr, struct bpf_prog *prog) { struct bpf_kprobe_multi_link *link = NULL; @@ -2761,6 +2772,11 @@ int bpf_kprobe_multi_link_attach(const u goto error; }
+ if (prog->kprobe_override && addrs_check_error_injection_list(addrs, cnt)) { + err = -EINVAL; + goto error; + } + link = kzalloc(sizeof(*link), GFP_KERNEL); if (!link) { err = -ENOMEM;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Olsa jolsa@kernel.org
commit 8f908db77782630c45ba29dac35c434b5ce0b730 upstream.
Marcus and Satya reported an issue where BTF_ID macro generates same symbol in separate objects and that breaks final vmlinux link.
ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol '__BTF_ID__struct__cgroup__624' is already defined
This can be triggered under specific configs when __COUNTER__ happens to be the same for the same symbol in two different translation units, which is already quite unlikely to happen.
Add __LINE__ number suffix to make BTF_ID symbol more unique, which is not a complete fix, but it would help for now and meanwhile we can work on better solution as suggested by Andrii.
Cc: stable@vger.kernel.org Reported-by: Satya Durga Srinivasu Prabhala quic_satyap@quicinc.com Reported-by: Marcus Seyfarth m.seyfarth@gmail.com Closes: https://github.com/ClangBuiltLinux/linux/issues/1913 Debugged-by: Nathan Chancellor nathan@kernel.org Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ5... Signed-off-by: Jiri Olsa jolsa@kernel.org Signed-off-by: Nick Desaulniers ndesaulniers@google.com Reviewed-by: Nathan Chancellor nathan@kernel.org Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-1-263fc519c21f@google.co... Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/btf_ids.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/btf_ids.h +++ b/include/linux/btf_ids.h @@ -49,7 +49,7 @@ word \ ____BTF_ID(symbol, word)
#define __ID(prefix) \ - __PASTE(prefix, __COUNTER__) + __PASTE(__PASTE(prefix, __COUNTER__), __LINE__)
/* * The BTF_ID defines unique symbol for each ID pointing
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nick Desaulniers ndesaulniers@google.com
commit c0bb9fb0e52a64601d38b3739b729d9138d4c8a1 upstream.
Marcus and Satya reported an issue where BTF_ID macro generates same symbol in separate objects and that breaks final vmlinux link.
ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol '__BTF_ID__struct__cgroup__624' is already defined
This can be triggered under specific configs when __COUNTER__ happens to be the same for the same symbol in two different translation units, which is already quite unlikely to happen.
Add __LINE__ number suffix to make BTF_ID symbol more unique, which is not a complete fix, but it would help for now and meanwhile we can work on better solution as suggested by Andrii.
Cc: stable@vger.kernel.org Reported-by: Satya Durga Srinivasu Prabhala quic_satyap@quicinc.com Reported-by: Marcus Seyfarth m.seyfarth@gmail.com Closes: https://github.com/ClangBuiltLinux/linux/issues/1913 Debugged-by: Nathan Chancellor nathan@kernel.org Co-developed-by: Jiri Olsa jolsa@kernel.org Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ5... Signed-off-by: Nick Desaulniers ndesaulniers@google.com Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-2-263fc519c21f@google.co... Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/include/linux/btf_ids.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/include/linux/btf_ids.h +++ b/tools/include/linux/btf_ids.h @@ -38,7 +38,7 @@ asm( \ ____BTF_ID(symbol)
#define __ID(prefix) \ - __PASTE(prefix, __COUNTER__) + __PASTE(__PASTE(prefix, __COUNTER__), __LINE__)
/* * The BTF_ID defines unique symbol for each ID pointing
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mika Westerberg mika.westerberg@linux.intel.com
commit e0b65f9b81fef180cf5f103adecbe5505c961153 upstream.
Alex reported that running ssh over IPv6 does not work with Thunderbolt/USB4 networking driver. The reason for that is that driver should call skb_is_gso() before calling skb_is_gso_v6(), and it should not return false after calculates the checksum successfully. This probably was a copy paste error from the original driver where it was done properly.
Reported-by: Alex Balcanquall alex@alexbal.com Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg mika.westerberg@linux.intel.com Reviewed-by: Eric Dumazet edumazet@google.com Reviewed-by: Jiri Pirko jiri@nvidia.com Reviewed-by: Jiri Pirko jiri@nvidia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/thunderbolt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/net/thunderbolt.c +++ b/drivers/net/thunderbolt.c @@ -1005,12 +1005,11 @@ static bool tbnet_xmit_csum_and_map(stru *tucso = ~csum_tcpudp_magic(ip_hdr(skb)->saddr, ip_hdr(skb)->daddr, 0, ip_hdr(skb)->protocol, 0); - } else if (skb_is_gso_v6(skb)) { + } else if (skb_is_gso(skb) && skb_is_gso_v6(skb)) { tucso = dest + ((void *)&(tcp_hdr(skb)->check) - data); *tucso = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0); - return false; } else if (protocol == htons(ETH_P_IPV6)) { tucso = dest + skb_checksum_start_offset(skb) + skb->csum_offset; *tucso = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Quang Le quanglex97@gmail.com
commit e6e43b8aa7cd3c3af686caf0c2e11819a886d705 upstream.
Forget to reset ctx->password to NULL will lead to bug like double free
Cc: stable@vger.kernel.org Cc: Willy Tarreau w@1wt.eu Reviewed-by: Namjae Jeon linkinjeon@kernel.org Signed-off-by: Quang Le quanglex97@gmail.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/smb/client/fs_context.c | 1 + 1 file changed, 1 insertion(+)
--- a/fs/smb/client/fs_context.c +++ b/fs/smb/client/fs_context.c @@ -1487,6 +1487,7 @@ static int smb3_fs_context_parse_param(s
cifs_parse_mount_err: kfree_sensitive(ctx->password); + ctx->password = NULL; return -EINVAL; }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Damien Le Moal dlemoal@kernel.org
commit 3b8e0af4a7a331d1510e963b8fd77e2fca0a77f1 upstream.
The function ata_port_request_pm() checks the port flag ATA_PFLAG_PM_PENDING and calls ata_port_wait_eh() if this flag is set to ensure that power management operations for a port are not scheduled simultaneously. However, this flag check is done without holding the port lock.
Fix this by taking the port lock on entry to the function and checking the flag under this lock. The lock is released and re-taken if ata_port_wait_eh() needs to be called. The two WARN_ON() macros checking that the ATA_PFLAG_PM_PENDING flag was cleared are removed as the first call is racy and the second one done without holding the port lock.
Fixes: 5ef41082912b ("ata: add ata port system PM callbacks") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal dlemoal@kernel.org Reviewed-by: Hannes Reinecke hare@suse.de Tested-by: Chia-Lin Kao (AceLan) acelan.kao@canonical.com Reviewed-by: Niklas Cassel niklas.cassel@wdc.com Tested-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Martin K. Petersen martin.petersen@oracle.com Reviewed-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/libata-core.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4981,17 +4981,19 @@ static void ata_port_request_pm(struct a struct ata_link *link; unsigned long flags;
- /* Previous resume operation might still be in - * progress. Wait for PM_PENDING to clear. + spin_lock_irqsave(ap->lock, flags); + + /* + * A previous PM operation might still be in progress. Wait for + * ATA_PFLAG_PM_PENDING to clear. */ if (ap->pflags & ATA_PFLAG_PM_PENDING) { + spin_unlock_irqrestore(ap->lock, flags); ata_port_wait_eh(ap); - WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); + spin_lock_irqsave(ap->lock, flags); }
- /* request PM ops to EH */ - spin_lock_irqsave(ap->lock, flags); - + /* Request PM operation to EH */ ap->pm_mesg = mesg; ap->pflags |= ATA_PFLAG_PM_PENDING; ata_for_each_link(link, ap, HOST_FIRST) { @@ -5003,10 +5005,8 @@ static void ata_port_request_pm(struct a
spin_unlock_irqrestore(ap->lock, flags);
- if (!async) { + if (!async) ata_port_wait_eh(ap); - WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); - } }
/*
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Damien Le Moal dlemoal@kernel.org
commit 84d76529c650f887f1e18caee72d6f0589e1baf9 upstream.
Whenever an ATA adapter driver is removed (e.g. rmmod), ata_port_detach() is called repeatedly for all the adapter ports to remove (unload) the devices attached to the port and delete the port device itself. Removing of devices is done using libata EH with the ATA_PFLAG_UNLOADING port flag set. This causes libata EH to execute ata_eh_unload() which disables all devices attached to the port.
ata_port_detach() finishes by calling scsi_remove_host() to remove the scsi host associated with the port. This function will trigger the removal of all scsi devices attached to the host and in the case of disks, calls to sd_shutdown() which will flush the device write cache and stop the device. However, given that the devices were already disabled by ata_eh_unload(), the synchronize write cache command and start stop unit commands fail. E.g. running "rmmod ahci" with first removing sd_mod results in error messages like:
ata13.00: disable device sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 0:0:0:0: [sda] Stopping disk sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Fix this by removing all scsi devices of the ata devices connected to the port before scheduling libata EH to disable the ATA devices.
Fixes: 720ba12620ee ("[PATCH] libata-hp: update unload-unplug") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal dlemoal@kernel.org Reviewed-by: Hannes Reinecke hare@suse.de Reviewed-by: Niklas Cassel niklas.cassel@wdc.com Tested-by: Chia-Lin Kao (AceLan) acelan.kao@canonical.com Tested-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/libata-core.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)
--- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5906,11 +5906,30 @@ static void ata_port_detach(struct ata_p if (!ap->ops->error_handler) goto skip_eh;
- /* tell EH we're leaving & flush EH */ + /* Wait for any ongoing EH */ + ata_port_wait_eh(ap); + + mutex_lock(&ap->scsi_scan_mutex); spin_lock_irqsave(ap->lock, flags); + + /* Remove scsi devices */ + ata_for_each_link(link, ap, HOST_FIRST) { + ata_for_each_dev(dev, link, ALL) { + if (dev->sdev) { + spin_unlock_irqrestore(ap->lock, flags); + scsi_remove_device(dev->sdev); + spin_lock_irqsave(ap->lock, flags); + dev->sdev = NULL; + } + } + } + + /* Tell EH to disable all devices */ ap->pflags |= ATA_PFLAG_UNLOADING; ata_port_schedule_eh(ap); + spin_unlock_irqrestore(ap->lock, flags); + mutex_unlock(&ap->scsi_scan_mutex);
/* wait till EH commits suicide */ ata_port_wait_eh(ap);
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Damien Le Moal dlemoal@kernel.org
commit 75e2bd5f1ede42a2bc88aa34b431e1ace8e0bea0 upstream.
libsas does its own domain based power management of ports. For such ports, libata should not use a device type defining power management operations as executing these operations for suspend/resume in addition to libsas calls to ata_sas_port_suspend() and ata_sas_port_resume() is not necessary (and likely dangerous to do, even though problems are not seen currently).
Introduce the new ata_port_sas_type device_type for ports managed by libsas. This new device type is used in ata_tport_add() and is defined without power management operations.
Fixes: 2fcbdcb4c802 ("[SCSI] libata: export ata_port suspend/resume infrastructure for sas") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal dlemoal@kernel.org Reviewed-by: Hannes Reinecke hare@suse.de Tested-by: Chia-Lin Kao (AceLan) acelan.kao@canonical.com Tested-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: John Garry john.g.garry@oracle.com Reviewed-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/libata-core.c | 2 +- drivers/ata/libata-transport.c | 9 ++++++++- drivers/ata/libata.h | 2 ++ 3 files changed, 11 insertions(+), 2 deletions(-)
--- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5173,7 +5173,7 @@ EXPORT_SYMBOL_GPL(ata_host_resume); #endif
const struct device_type ata_port_type = { - .name = "ata_port", + .name = ATA_PORT_TYPE_NAME, #ifdef CONFIG_PM .pm = &ata_port_pm_ops, #endif --- a/drivers/ata/libata-transport.c +++ b/drivers/ata/libata-transport.c @@ -266,6 +266,10 @@ void ata_tport_delete(struct ata_port *a put_device(dev); }
+static const struct device_type ata_port_sas_type = { + .name = ATA_PORT_TYPE_NAME, +}; + /** ata_tport_add - initialize a transport ATA port structure * * @parent: parent device @@ -283,7 +287,10 @@ int ata_tport_add(struct device *parent, struct device *dev = &ap->tdev;
device_initialize(dev); - dev->type = &ata_port_type; + if (ap->flags & ATA_FLAG_SAS_HOST) + dev->type = &ata_port_sas_type; + else + dev->type = &ata_port_type;
dev->parent = parent; ata_host_get(ap->host); --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -30,6 +30,8 @@ enum { ATA_DNXFER_QUIET = (1 << 31), };
+#define ATA_PORT_TYPE_NAME "ata_port" + extern atomic_t ata_print_id; extern int atapi_passthru16; extern int libata_fua;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthias Schiffer mschiffer@universe-factory.net
commit 753a4d531bc518633ea88ac0ed02b25a16823d51 upstream.
On certain SATA controllers, softreset fails after wakeup from S2RAM with the message "softreset failed (1st FIS failed)", sometimes resulting in drives not being detected again. With the increased timeout, this issue is avoided. Instead, "softreset failed (device not ready)" is now logged 1-2 times; this later failure seems to cause fewer problems however, and the drives are detected reliably once they've spun up and the probe is retried.
The issue was observed with the primary SATA controller of the QNAP TS-453B, which is an "Intel Corporation Celeron/Pentium Silver Processor SATA Controller [8086:31e3] (rev 06)" integrated in the Celeron J4125 CPU, and the following drives:
- Seagate IronWolf ST12000VN0008 - Seagate IronWolf ST8000NE0004
The SATA controller seems to be more relevant to this issue than the drives, as the same drives are always detected reliably on the secondary SATA controller on the same board (an ASMedia 106x) without any "softreset failed" errors even without the increased timeout.
Fixes: e7d3ef13d52a ("libata: change drive ready wait after hard reset to 5s") Cc: stable@vger.kernel.org Signed-off-by: Matthias Schiffer mschiffer@universe-factory.net Signed-off-by: Damien Le Moal dlemoal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -253,7 +253,7 @@ enum { * advised to wait only for the following duration before * doing SRST. */ - ATA_TMOUT_PMP_SRST_WAIT = 5000, + ATA_TMOUT_PMP_SRST_WAIT = 10000,
/* When the LPM policy is set to ATA_LPM_MAX_POWER, there might * be a spurious PHY event, so ignore the first PHY event that
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Pello devel@otheo.eu
commit b7599d241778d0b10cdf7a5c755aa7db9b83250c upstream.
There is an assertion in ggtt_reserve_guc_top that the global GTT is of size at least GUC_GGTT_TOP, which is not the case on a 32-bit platform; see commit 562d55d991b39ce376c492df2f7890fd6a541ffc ("drm/i915/bdw: Only use 2g GGTT for 32b platforms"). If GEM_BUG_ON is enabled, this triggers a BUG(); if GEM_BUG_ON is disabled, the subsequent reservation fails and the driver fails to initialise the device:
i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Failed to reserve top of GGTT for GuC i915 0000:00:02.0: Device initialization failed (-28) i915 0000:00:02.0: Please file a bug on drm/i915; see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details. i915: probe of 0000:00:02.0 failed with error -28
Make the reservation at the top of the available space, whatever that is, instead of assuming that the top will be GUC_GGTT_TOP.
Fixes: 911800765ef6 ("drm/i915/uc: Reserve upper range of GGTT") Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9080 Signed-off-by: Javier Pello devel@otheo.eu Reviewed-by: Daniele Ceraolo Spurio daniele.ceraolospurio@intel.com Cc: Fernando Pacheco fernando.pacheco@intel.com Cc: Chris Wilson chris@chris-wilson.co.uk Cc: Jani Nikula jani.nikula@linux.intel.com Cc: Joonas Lahtinen joonas.lahtinen@linux.intel.com Cc: Rodrigo Vivi rodrigo.vivi@intel.com Cc: Tvrtko Ursulin tvrtko.ursulin@linux.intel.com Cc: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: John Harrison John.C.Harrison@Intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20230902171039.2229126186d697d... (cherry picked from commit 0f3fa942d91165c2702577e9274d2ee1c7212afc) Signed-off-by: Rodrigo Vivi rodrigo.vivi@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/i915/gt/intel_ggtt.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-)
--- a/drivers/gpu/drm/i915/gt/intel_ggtt.c +++ b/drivers/gpu/drm/i915/gt/intel_ggtt.c @@ -500,20 +500,31 @@ void intel_ggtt_unbind_vma(struct i915_a vm->clear_range(vm, vma_res->start, vma_res->vma_size); }
+/* + * Reserve the top of the GuC address space for firmware images. Addresses + * beyond GUC_GGTT_TOP in the GuC address space are inaccessible by GuC, + * which makes for a suitable range to hold GuC/HuC firmware images if the + * size of the GGTT is 4G. However, on a 32-bit platform the size of the GGTT + * is limited to 2G, which is less than GUC_GGTT_TOP, but we reserve a chunk + * of the same size anyway, which is far more than needed, to keep the logic + * in uc_fw_ggtt_offset() simple. + */ +#define GUC_TOP_RESERVE_SIZE (SZ_4G - GUC_GGTT_TOP) + static int ggtt_reserve_guc_top(struct i915_ggtt *ggtt) { - u64 size; + u64 offset; int ret;
if (!intel_uc_uses_guc(&ggtt->vm.gt->uc)) return 0;
- GEM_BUG_ON(ggtt->vm.total <= GUC_GGTT_TOP); - size = ggtt->vm.total - GUC_GGTT_TOP; + GEM_BUG_ON(ggtt->vm.total <= GUC_TOP_RESERVE_SIZE); + offset = ggtt->vm.total - GUC_TOP_RESERVE_SIZE;
- ret = i915_gem_gtt_reserve(&ggtt->vm, NULL, &ggtt->uc_fw, size, - GUC_GGTT_TOP, I915_COLOR_UNEVICTABLE, - PIN_NOEVICT); + ret = i915_gem_gtt_reserve(&ggtt->vm, NULL, &ggtt->uc_fw, + GUC_TOP_RESERVE_SIZE, offset, + I915_COLOR_UNEVICTABLE, PIN_NOEVICT); if (ret) drm_dbg(&ggtt->vm.i915->drm, "Failed to reserve top of GGTT for GuC\n");
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Frattaroli frattaroli.nicolas@gmail.com
commit cbcdfbf5a6cd66e47e5ee5d49c4c5a27a07ba082 upstream.
Similar to the rk817 codec alias that was missing, the rk817 charger driver is missing a module alias as well. This absence prevents the driver from autoprobing on OF systems when it is built as a module.
Add the right MODULE_ALIAS to fix this.
Fixes: 11cb8da0189b ("power: supply: Add charger driver for Rockchip RK817") Cc: stable@vger.kernel.org Signed-off-by: Nicolas Frattaroli frattaroli.nicolas@gmail.com Reviewed-by: Chris Morgan macromorgan@hotmail.com Link: https://lore.kernel.org/r/20230612143651.959646-2-frattaroli.nicolas@gmail.c... Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/power/supply/rk817_charger.c | 1 + 1 file changed, 1 insertion(+)
--- a/drivers/power/supply/rk817_charger.c +++ b/drivers/power/supply/rk817_charger.c @@ -1233,3 +1233,4 @@ MODULE_DESCRIPTION("Battery power supply MODULE_AUTHOR("Maya Matuszczyk maccraft123mc@gmail.com"); MODULE_AUTHOR("Chris Morgan macromorgan@hotmail.com"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:rk817-charger");
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Walleij linus.walleij@linaro.org
commit dc77721ea4aa1e8937e2436f230b5a69065cc508 upstream.
I had the following weird phenomena on a mobile phone: while the capacity in /sys/class/power_supply/ab8500_fg/capacity would reflect the actual charge and capacity of the battery, only 1/3 of the value was shown on the battery status indicator and warnings for low battery appeared.
It turns out that UPower, the Freedesktop power daemon, will average all the power supplies of type "battery" in /sys/class/power_supply/* if there is more than one battery.
For the AB8500, there was "battery" ab8500_fg, ab8500_btemp and ab8500_chargalg. The latter two don't know anything about the battery, and should not be considered. They were however averaged and with the capacity of 0.
Flag ab8500_btemp and ab8500_chargalg with type "unknown" so they are not averaged as batteries.
Remove the technology prop from ab8500_btemp as well, all it does is snoop in on knowledge from another supply.
After this the battery indicator shows the right value.
Cc: Stefan Hansson newbyte@disroot.org Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/power/supply/ab8500_btemp.c | 9 +-------- drivers/power/supply/ab8500_chargalg.c | 2 +- 2 files changed, 2 insertions(+), 9 deletions(-)
--- a/drivers/power/supply/ab8500_btemp.c +++ b/drivers/power/supply/ab8500_btemp.c @@ -115,7 +115,6 @@ struct ab8500_btemp { static enum power_supply_property ab8500_btemp_props[] = { POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_ONLINE, - POWER_SUPPLY_PROP_TECHNOLOGY, POWER_SUPPLY_PROP_TEMP, };
@@ -532,12 +531,6 @@ static int ab8500_btemp_get_property(str else val->intval = 1; break; - case POWER_SUPPLY_PROP_TECHNOLOGY: - if (di->bm->bi) - val->intval = di->bm->bi->technology; - else - val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; - break; case POWER_SUPPLY_PROP_TEMP: val->intval = ab8500_btemp_get_temp(di); break; @@ -662,7 +655,7 @@ static char *supply_interface[] = {
static const struct power_supply_desc ab8500_btemp_desc = { .name = "ab8500_btemp", - .type = POWER_SUPPLY_TYPE_BATTERY, + .type = POWER_SUPPLY_TYPE_UNKNOWN, .properties = ab8500_btemp_props, .num_properties = ARRAY_SIZE(ab8500_btemp_props), .get_property = ab8500_btemp_get_property, --- a/drivers/power/supply/ab8500_chargalg.c +++ b/drivers/power/supply/ab8500_chargalg.c @@ -1720,7 +1720,7 @@ static char *supply_interface[] = {
static const struct power_supply_desc ab8500_chargalg_desc = { .name = "ab8500_chargalg", - .type = POWER_SUPPLY_TYPE_BATTERY, + .type = POWER_SUPPLY_TYPE_UNKNOWN, .properties = ab8500_chargalg_props, .num_properties = ARRAY_SIZE(ab8500_chargalg_props), .get_property = ab8500_chargalg_get_property,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Ungerer gerg@kernel.org
commit 7c3151585730b7095287be8162b846d31e6eee61 upstream.
The elf-fdpic loader hard sets the process personality to either PER_LINUX_FDPIC for true elf-fdpic binaries or to PER_LINUX for normal ELF binaries (in this case they would be constant displacement compiled with -pie for example). The problem with that is that it will lose any other bits that may be in the ELF header personality (such as the "bug emulation" bits).
On the ARM architecture the ADDR_LIMIT_32BIT flag is used to signify a normal 32bit binary - as opposed to a legacy 26bit address binary. This matters since start_thread() will set the ARM CPSR register as required based on this flag. If the elf-fdpic loader loses this bit the process will be mis-configured and crash out pretty quickly.
Modify elf-fdpic loader personality setting so that it preserves the upper three bytes by using the SET_PERSONALITY macro to set it. This macro in the generic case sets PER_LINUX and preserves the upper bytes. Architectures can override this for their specific use case, and ARM does exactly this.
The problem shows up quite easily running under qemu using the ARM architecture, but not necessarily on all types of real ARM hardware. If the underlying ARM processor does not support the legacy 26-bit addressing mode then everything will work as expected.
Link: https://lkml.kernel.org/r/20230907011808.2985083-1-gerg@kernel.org Fixes: 1bde925d23547 ("fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries") Signed-off-by: Greg Ungerer gerg@kernel.org Cc: Al Viro viro@zeniv.linux.org.uk Cc: Christian Brauner brauner@kernel.org Cc: Eric W. Biederman ebiederm@xmission.com Cc: Greg Ungerer gerg@kernel.org Cc: Kees Cook keescook@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/binfmt_elf_fdpic.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
--- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -345,10 +345,9 @@ static int load_elf_fdpic_binary(struct /* there's now no turning back... the old userspace image is dead, * defunct, deceased, etc. */ + SET_PERSONALITY(exec_params.hdr); if (elf_check_fdpic(&exec_params.hdr)) - set_personality(PER_LINUX_FDPIC); - else - set_personality(PER_LINUX); + current->personality |= PER_LINUX_FDPIC; if (elf_read_implies_exec(&exec_params.hdr, executable_stack)) current->personality |= READ_IMPLIES_EXEC;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: YuBiao Wang YuBiao.Wang@amd.com
commit cc39f9ccb82426e576734b493e1777ea01b144a8 upstream.
Directly use tbo's start address will miss the domain start offset. Need to use gpu_offset instead.
Signed-off-by: YuBiao Wang YuBiao.Wang@amd.com Reviewed-by: Christian König christian.koenig@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -201,7 +201,7 @@ static int add_queue_mes(struct device_q
if (q->wptr_bo) { wptr_addr_off = (uint64_t)q->properties.write_ptr & (PAGE_SIZE - 1); - queue_input.wptr_mc_addr = ((uint64_t)q->wptr_bo->tbo.resource->start << PAGE_SHIFT) + wptr_addr_off; + queue_input.wptr_mc_addr = amdgpu_bo_gpu_offset(q->wptr_bo) + wptr_addr_off; }
queue_input.is_kfd_process = 1;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jani Nikula jani.nikula@intel.com
commit 099f0af9d98231bb74956ce92508e87cbcb896be upstream.
The EDID returned by drm_bridge_get_edid() needs to be freed.
Fixes: 0af5e0b41110 ("drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR") Cc: Neil Armstrong narmstrong@baylibre.com Cc: Sam Ravnborg sam@ravnborg.org Cc: Martin Blumenstingl martin.blumenstingl@googlemail.com Cc: Neil Armstrong neil.armstrong@linaro.org Cc: Kevin Hilman khilman@baylibre.com Cc: Jerome Brunet jbrunet@baylibre.com Cc: dri-devel@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org # v5.17+ Signed-off-by: Jani Nikula jani.nikula@intel.com Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Neil Armstrong neil.armstrong@linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20230914131015.2472029-1-jani.... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/meson/meson_encoder_hdmi.c | 2 ++ 1 file changed, 2 insertions(+)
--- a/drivers/gpu/drm/meson/meson_encoder_hdmi.c +++ b/drivers/gpu/drm/meson/meson_encoder_hdmi.c @@ -332,6 +332,8 @@ static void meson_encoder_hdmi_hpd_notif return;
cec_notifier_set_phys_addr_from_edid(encoder_hdmi->cec_notifier, edid); + + kfree(edid); } else cec_notifier_phys_addr_invalidate(encoder_hdmi->cec_notifier); }
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Hocko mhocko@suse.com
commit 86327e8eb94c52eca4f93cfece2e29d1bf52acbf upstream.
kmem.limit_in_bytes (v1 way to limit kernel memory usage) has been deprecated since 58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes") merged in 5.16. We haven't heard about any serious users since then but it seems that the mere presence of the file is causing more harm thatn good. We (SUSE) have had several bug reports from customers where Docker based containers started to fail because a write to kmem.limit_in_bytes has failed.
This was unexpected because runc code only expects ENOENT (kmem disabled) or EBUSY (tasks already running within cgroup). So a new error code was unexpected and the whole container startup failed. This has been later addressed by https://github.com/opencontainers/runc/commit/52390d68040637dfc77f9fda6bbe70... so current Docker runtimes do not suffer from the problem anymore. There are still older version of Docker in use and likely hard to get rid of completely.
Address this by wiping out the file completely and effectively get back to pre 4.5 era and CONFIG_MEMCG_KMEM=n configuration.
I would recommend backporting to stable trees which have picked up 58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes").
[mhocko@suse.com: restore _KMEM switch case] Link: https://lkml.kernel.org/r/ZKe5wxdbvPi5Cwd7@dhcp22.suse.cz Link: https://lkml.kernel.org/r/20230704115240.14672-1-mhocko@kernel.org Signed-off-by: Michal Hocko mhocko@suse.com Acked-by: Shakeel Butt shakeelb@google.com Acked-by: Johannes Weiner hannes@cmpxchg.org Acked-by: Roman Gushchin roman.gushchin@linux.dev Cc: Muchun Song muchun.song@linux.dev Cc: Tejun Heo tj@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/admin-guide/cgroup-v1/memory.rst | 2 -- mm/memcontrol.c | 10 ---------- 2 files changed, 12 deletions(-)
--- a/Documentation/admin-guide/cgroup-v1/memory.rst +++ b/Documentation/admin-guide/cgroup-v1/memory.rst @@ -91,8 +91,6 @@ Brief summary of control files. memory.oom_control set/show oom controls. memory.numa_stat show the number of memory usage per numa node - memory.kmem.limit_in_bytes This knob is deprecated and writing to - it will return -ENOTSUPP. memory.kmem.usage_in_bytes show current kernel memory allocation memory.kmem.failcnt show the number of kernel memory usage hits limits --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -3841,10 +3841,6 @@ static ssize_t mem_cgroup_write(struct k case _MEMSWAP: ret = mem_cgroup_resize_max(memcg, nr_pages, true); break; - case _KMEM: - /* kmem.limit_in_bytes is deprecated. */ - ret = -EOPNOTSUPP; - break; case _TCP: ret = memcg_update_tcp_max(memcg, nr_pages); break; @@ -5056,12 +5052,6 @@ static struct cftype mem_cgroup_legacy_f }, #endif { - .name = "kmem.limit_in_bytes", - .private = MEMFILE_PRIVATE(_KMEM, RES_LIMIT), - .write = mem_cgroup_write, - .read_u64 = mem_cgroup_read_u64, - }, - { .name = "kmem.usage_in_bytes", .private = MEMFILE_PRIVATE(_KMEM, RES_USAGE), .read_u64 = mem_cgroup_read_u64,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Hocko mhocko@suse.com
commit 4597648fddeadef5877610d693af11906aa666ac upstream.
This reverts commits 86327e8eb94c ("memcg: drop kmem.limit_in_bytes") and partially reverts 58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes") which have incrementally removed support for the kernel memory accounting hard limit. Unfortunately it has turned out that there is still userspace depending on the existence of memory.kmem.limit_in_bytes [1]. The underlying functionality is not really required but the non-existent file just confuses the userspace which fails in the result. The patch to fix this on the userspace side has been submitted but it is hard to predict how it will propagate through the maze of 3rd party consumers of the software.
Now, reverting alone 86327e8eb94c is not an option because there is another set of userspace which cannot cope with ENOTSUPP returned when writing to the file. Therefore we have to go and revisit 58056f77502f as well. There are two ways to go ahead. Either we give up on the deprecation and fully revert 58056f77502f as well or we can keep kmem.limit_in_bytes but make the write a noop and warn about the fact. This should work for both known breaking workloads which depend on the existence but do not depend on the hard limit enforcement.
Note to backporters to stable trees. a8c49af3be5f ("memcg: add per-memcg total kernel memory stat") introduced in 4.18 has added memcg_account_kmem so the accounting is not done by obj_cgroup_charge_pages directly for v1 anymore. Prior kernels need to add it explicitly (thanks to Johannes for pointing this out).
[akpm@linux-foundation.org: fix build - remove unused local] Link: http://lkml.kernel.org/r/20230920081101.GA12096@linuxonhyperv3.guj3yctzbm1et... [1] Link: https://lkml.kernel.org/r/ZRE5VJozPZt9bRPy@dhcp22.suse.cz Fixes: 86327e8eb94c ("memcg: drop kmem.limit_in_bytes") Fixes: 58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes") Signed-off-by: Michal Hocko mhocko@suse.com Acked-by: Shakeel Butt shakeelb@google.com Acked-by: Johannes Weiner hannes@cmpxchg.org Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Jeremi Piotrowski jpiotrowski@linux.microsoft.com Cc: Muchun Song muchun.song@linux.dev Cc: Roman Gushchin roman.gushchin@linux.dev Cc: Tejun heo tj@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/admin-guide/cgroup-v1/memory.rst | 7 +++++++ mm/memcontrol.c | 13 +++++++++++++ 2 files changed, 20 insertions(+)
--- a/Documentation/admin-guide/cgroup-v1/memory.rst +++ b/Documentation/admin-guide/cgroup-v1/memory.rst @@ -91,6 +91,13 @@ Brief summary of control files. memory.oom_control set/show oom controls. memory.numa_stat show the number of memory usage per numa node + memory.kmem.limit_in_bytes Deprecated knob to set and read the kernel + memory hard limit. Kernel hard limit is not + supported since 5.16. Writing any value to + do file will not have any effect same as if + nokmem kernel parameter was specified. + Kernel memory is still charged and reported + by memory.kmem.usage_in_bytes. memory.kmem.usage_in_bytes show current kernel memory allocation memory.kmem.failcnt show the number of kernel memory usage hits limits --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -3841,6 +3841,13 @@ static ssize_t mem_cgroup_write(struct k case _MEMSWAP: ret = mem_cgroup_resize_max(memcg, nr_pages, true); break; + case _KMEM: + pr_warn_once("kmem.limit_in_bytes is deprecated and will be removed. " + "Writing any value to this file has no effect. " + "Please report your usecase to linux-mm@kvack.org if you " + "depend on this functionality.\n"); + ret = 0; + break; case _TCP: ret = memcg_update_tcp_max(memcg, nr_pages); break; @@ -5052,6 +5059,12 @@ static struct cftype mem_cgroup_legacy_f }, #endif { + .name = "kmem.limit_in_bytes", + .private = MEMFILE_PRIVATE(_KMEM, RES_LIMIT), + .write = mem_cgroup_write, + .read_u64 = mem_cgroup_read_u64, + }, + { .name = "kmem.usage_in_bytes", .private = MEMFILE_PRIVATE(_KMEM, RES_USAGE), .read_u64 = mem_cgroup_read_u64,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mario Limonciello mario.limonciello@amd.com
commit cfff2a7794d23b03a3ddedd318bf1df1876c598f upstream.
Lenovo 82TL has DMIC connected like 82V2 does. Also match 82TL.
Reported-by: wildjim@kiwinet.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217063 Signed-off-by: Mario Limonciello mario.limonciello@amd.com Link: https://lore.kernel.org/r/20230906182257.45736-1-mario.limonciello@amd.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+)
--- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -217,6 +217,13 @@ static const struct dmi_system_id yc_acp .driver_data = &acp6x_card, .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "82TL"), + } + }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), DMI_MATCH(DMI_PRODUCT_NAME, "82QF"), } },
+Namhyung, Ian,
On 10/4/23 10:52, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
perf fails to build with:
fixdep: error opening depfile: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/.pmu-events.o.d: No such file or directory make[5]: *** [pmu-events/Build:33: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/pmu-events.o] Error 2 make[4]: *** [Makefile.perf:672: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/pmu-events-in.o] Error 2 make[3]: *** [Makefile.perf:240: sub-make] Error 2 make[2]: *** [Makefile:70: all] Error 2 make[1]: *** [package/pkg-generic.mk:294: /local/users/fainelli/buildroot/output/arm/build/linux-tools/.stamp_built] Error 2 make: *** [Makefile:27: _all] Error 2
due a80fd00cb1a7793ead4d7c3fa7d3f1e898231c27 ("perf build: Update build rule for generated files"). Reverting that commit fixes the build for me and then all is good in terms of testing.
Hello,
On Wed, Oct 4, 2023 at 12:33 PM Florian Fainelli f.fainelli@gmail.com wrote:
+Namhyung, Ian,
On 10/4/23 10:52, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
perf fails to build with:
fixdep: error opening depfile: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/.pmu-events.o.d: No such file or directory make[5]: *** [pmu-events/Build:33: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/pmu-events.o] Error 2 make[4]: *** [Makefile.perf:672: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/pmu-events-in.o] Error 2 make[3]: *** [Makefile.perf:240: sub-make] Error 2 make[2]: *** [Makefile:70: all] Error 2 make[1]: *** [package/pkg-generic.mk:294: /local/users/fainelli/buildroot/output/arm/build/linux-tools/.stamp_built] Error 2 make: *** [Makefile:27: _all] Error 2
due a80fd00cb1a7793ead4d7c3fa7d3f1e898231c27 ("perf build: Update build rule for generated files"). Reverting that commit fixes the build for me and then all is good in terms of testing.
I think it's ok to drop the patches if it's not applied cleanly.
Thanks, Namhyung
On 10/4/2023 1:19 PM, Namhyung Kim wrote:
Hello,
On Wed, Oct 4, 2023 at 12:33 PM Florian Fainelli f.fainelli@gmail.com wrote:
+Namhyung, Ian,
On 10/4/23 10:52, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
perf fails to build with:
fixdep: error opening depfile: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/.pmu-events.o.d: No such file or directory make[5]: *** [pmu-events/Build:33: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/pmu-events.o] Error 2 make[4]: *** [Makefile.perf:672: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/pmu-events-in.o] Error 2 make[3]: *** [Makefile.perf:240: sub-make] Error 2 make[2]: *** [Makefile:70: all] Error 2 make[1]: *** [package/pkg-generic.mk:294: /local/users/fainelli/buildroot/output/arm/build/linux-tools/.stamp_built] Error 2 make: *** [Makefile:27: _all] Error 2
due a80fd00cb1a7793ead4d7c3fa7d3f1e898231c27 ("perf build: Update build rule for generated files"). Reverting that commit fixes the build for me and then all is good in terms of testing.
I think it's ok to drop the patches if it's not applied cleanly.
AFAICT the patch applied cleanly. There was some bizarre interplay in stable kernels prior to < 6.1 as reported here:
https://lore.kernel.org/all/dcb9997a-2e8a-5eb2-7a34-f8af418d4bf1@gmail.com/ https://lore.kernel.org/all/6a577578-8adb-aa70-1bf8-b1a4573152cf@gmail.com/
Does this make sense to you that on 6.1 which does have Ian's commit 00facc760903be6675870c2749e2cd72140e396e ("perf jevents: Switch build to use jevents.py") that we would still get this build error somehow?
Thanks
On Wed, Oct 4, 2023 at 5:52 PM Florian Fainelli f.fainelli@gmail.com wrote:
On 10/4/2023 1:19 PM, Namhyung Kim wrote:
Hello,
On Wed, Oct 4, 2023 at 12:33 PM Florian Fainelli f.fainelli@gmail.com wrote:
+Namhyung, Ian,
On 10/4/23 10:52, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
perf fails to build with:
fixdep: error opening depfile: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/.pmu-events.o.d: No such file or directory make[5]: *** [pmu-events/Build:33: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/pmu-events.o] Error 2 make[4]: *** [Makefile.perf:672: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/pmu-events-in.o] Error 2 make[3]: *** [Makefile.perf:240: sub-make] Error 2 make[2]: *** [Makefile:70: all] Error 2 make[1]: *** [package/pkg-generic.mk:294: /local/users/fainelli/buildroot/output/arm/build/linux-tools/.stamp_built] Error 2 make: *** [Makefile:27: _all] Error 2
due a80fd00cb1a7793ead4d7c3fa7d3f1e898231c27 ("perf build: Update build rule for generated files"). Reverting that commit fixes the build for me and then all is good in terms of testing.
I think it's ok to drop the patches if it's not applied cleanly.
AFAICT the patch applied cleanly. There was some bizarre interplay in stable kernels prior to < 6.1 as reported here:
https://lore.kernel.org/all/dcb9997a-2e8a-5eb2-7a34-f8af418d4bf1@gmail.com/ https://lore.kernel.org/all/6a577578-8adb-aa70-1bf8-b1a4573152cf@gmail.com/
Does this make sense to you that on 6.1 which does have Ian's commit 00facc760903be6675870c2749e2cd72140e396e ("perf jevents: Switch build to use jevents.py") that we would still get this build error somehow?
You can drop the pmu-events part of the change if possible. If not, I'm ok to drop the entire patch as it's intended to fix a corner case only. Normal builds should be fine before and after the change.
Thanks, Namhyung
On Wed, Oct 04, 2023 at 10:15:16PM -0700, Namhyung Kim wrote:
On Wed, Oct 4, 2023 at 5:52 PM Florian Fainelli f.fainelli@gmail.com wrote:
On 10/4/2023 1:19 PM, Namhyung Kim wrote:
Hello,
On Wed, Oct 4, 2023 at 12:33 PM Florian Fainelli f.fainelli@gmail.com wrote:
+Namhyung, Ian,
On 10/4/23 10:52, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
perf fails to build with:
fixdep: error opening depfile: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/.pmu-events.o.d: No such file or directory make[5]: *** [pmu-events/Build:33: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/pmu-events.o] Error 2 make[4]: *** [Makefile.perf:672: /local/users/fainelli/buildroot/output/arm/build/linux-custom/tools/perf/pmu-events/pmu-events-in.o] Error 2 make[3]: *** [Makefile.perf:240: sub-make] Error 2 make[2]: *** [Makefile:70: all] Error 2 make[1]: *** [package/pkg-generic.mk:294: /local/users/fainelli/buildroot/output/arm/build/linux-tools/.stamp_built] Error 2 make: *** [Makefile:27: _all] Error 2
due a80fd00cb1a7793ead4d7c3fa7d3f1e898231c27 ("perf build: Update build rule for generated files"). Reverting that commit fixes the build for me and then all is good in terms of testing.
I think it's ok to drop the patches if it's not applied cleanly.
AFAICT the patch applied cleanly. There was some bizarre interplay in stable kernels prior to < 6.1 as reported here:
https://lore.kernel.org/all/dcb9997a-2e8a-5eb2-7a34-f8af418d4bf1@gmail.com/ https://lore.kernel.org/all/6a577578-8adb-aa70-1bf8-b1a4573152cf@gmail.com/
Does this make sense to you that on 6.1 which does have Ian's commit 00facc760903be6675870c2749e2cd72140e396e ("perf jevents: Switch build to use jevents.py") that we would still get this build error somehow?
You can drop the pmu-events part of the change if possible. If not, I'm ok to drop the entire patch as it's intended to fix a corner case only. Normal builds should be fine before and after the change.
I'm going to just drop the patch now from all queues, thanks!
greg k-h
Hi,
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
This 6.1.56-rc1 failed to build on rhel7 with dev-tool-set 8, but 6.1.55 works.
Build error message: gcc: fatal error: no input files make[3]: *** [pmu-events/Build:33: pmu-events/pmu-events.o] Error 1
After the revert of 'perf-build-update-build-rule-for-generated-files.patch' the build works again.
Best Regards Wang Yugui (wangyugui@e16-tech.com) 2023/10/05
On Thu, Oct 05, 2023 at 08:17:48AM +0800, Wang Yugui wrote:
Hi,
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
This 6.1.56-rc1 failed to build on rhel7 with dev-tool-set 8, but 6.1.55 works.
Build error message: gcc: fatal error: no input files make[3]: *** [pmu-events/Build:33: pmu-events/pmu-events.o] Error 1
After the revert of 'perf-build-update-build-rule-for-generated-files.patch' the build works again.
Offending patch dropped, thanks.
greg k-h
On 10/4/23 11:52, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan skhan@linuxfoundation.org
thanks, -- Shuah
Hello,
On Wed, 4 Oct 2023 19:52:53 +0200 Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
This rc kernel passes DAMON functionality test[1] on my test machine. Attaching the test results summary below. Please note that I retrieved the kernel from linux-stable-rc tree[2].
Tested-by: SeongJae Park sj@kernel.org
[1] https://github.com/awslabs/damon-tests/tree/next/corr [2] 0353a7bfd2b6 ("Linux 6.1.56-rc1")
Thanks, SJ
[...]
---
# .config:1405:warning: override: reassigning to symbol DAMON # .config:1415:warning: override: reassigning to symbol CGROUPS ok 14 selftests: damon-tests: build_nomemcg.sh # kselftest dir '/home/sjpark/damon-tests-cont/linux/tools/testing/selftests/damon-tests' is in dirty state. # the log is at '/home/sjpark/log'. [32m ok 1 selftests: damon: debugfs_attrs.sh ok 2 selftests: damon: debugfs_schemes.sh ok 3 selftests: damon: debugfs_target_ids.sh ok 4 selftests: damon: debugfs_empty_targets.sh ok 5 selftests: damon: debugfs_huge_count_read_write.sh ok 6 selftests: damon: debugfs_duplicate_context_creation.sh ok 7 selftests: damon: sysfs.sh ok 1 selftests: damon-tests: kunit.sh ok 2 selftests: damon-tests: huge_count_read_write.sh ok 3 selftests: damon-tests: buffer_overflow.sh ok 4 selftests: damon-tests: rm_contexts.sh ok 5 selftests: damon-tests: record_null_deref.sh ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh ok 8 selftests: damon-tests: damo_tests.sh ok 9 selftests: damon-tests: masim-record.sh ok 10 selftests: damon-tests: build_i386.sh ok 11 selftests: damon-tests: build_arm64.sh ok 12 selftests: damon-tests: build_i386_idle_flag.sh ok 13 selftests: damon-tests: build_i386_highpte.sh ok 14 selftests: damon-tests: build_nomemcg.sh [33m [92mPASS [39m _remote_run_corr.sh SUCCESS
On Wed, Oct 04, 2023 at 07:52:53PM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Successfully compiled and installed bindeb-pkgs on my computer (Acer Aspire E15, Intel Core i3 Haswell). No noticeable regressions.
Tested-by: Bagas Sanjaya bagasdotme@gmail.com
Hi!
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Here are some issues:
Sakari Ailus sakari.ailus@linux.intel.com media: via: Use correct dependency for camera sensor drivers Sakari Ailus sakari.ailus@linux.intel.com media: v4l: Use correct dependency for camera sensor drivers
These are is unsuitable for 6.1 as the VIDEO_CAMERA_SENSOR symbol does not exist in 6.1. Please drop.
David Thompson davthompson@nvidia.com platform/mellanox: mlxbf-bootctl: add NET dependency into Kconfig
Unsuitable for stable, we don't have that problem in 5.10 or 6.1.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-6...
Tested-by: Pavel Machek (CIP) pavel@denx.de
Best regards, Pavel
On Thu, Oct 05, 2023 at 02:27:40PM +0200, Pavel Machek wrote:
Hi!
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Here are some issues:
Sakari Ailus sakari.ailus@linux.intel.com media: via: Use correct dependency for camera sensor drivers Sakari Ailus sakari.ailus@linux.intel.com media: v4l: Use correct dependency for camera sensor drivers
These are is unsuitable for 6.1 as the VIDEO_CAMERA_SENSOR symbol does not exist in 6.1. Please drop.
It is in the 6.1.y tree, please look closer.
Hi Greg
On Thu, Oct 5, 2023 at 3:12 AM Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
6.1.56-rc1 tested.
Build successfully completed. Boot successfully completed. No dmesg regressions. Video output normal. Sound output normal.
Lenovo ThinkPad X1 Carbon Gen10(Intel i7-1260P(x86_64) arch linux)
Thanks
Tested-by: Takeshi Ogasawara takeshi.ogasawara@futuring-girl.com
On Wed, 4 Oct 2023 at 23:41, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. Regressions on arm64 bcm2711-rpi-4-b device running LTP dio tests on NFS mounted rootfs. and LTP hugetlb hugemmap11 test case failed on x86 and arm64 bcm2711-rpi-4-b.
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
LTP hugetlb tests failed log tst_hugepage.c:83: TINFO: 1 hugepage(s) reserved tst_test.c:1558: TINFO: Timeout per run is 0h 05m 00s hugemmap11.c:47: TFAIL: Memory mismatch after Direct-IO write
LTP dio tests failed log compare_file: char mismatch: infile offset 4096: 0x01 . outfile offset 4096: 0x00 . diotest01 1 TFAIL : diotest1.c:158: file compare failed for infile and outfile
## Build * kernel: 6.1.56-rc1 * git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc * git branch: linux-6.1.y * git commit: 0353a7bfd2b60c5e42c8651eb3fa4cc48159db5f * git describe: v6.1.55-260-g0353a7bfd2b6 * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.1.y/build/v6.1.55...
## Test Regressions (compared to v6.1.55) * x86_64-clang, ltp-hugetlb * bcm2711-rpi-4-b, ltp-hugetlb * bcm2711-rpi-4-b-clang, ltp-hugetlb * bcm2711-rpi-4-b-64k_page_size, ltp-hugetlb - hugemmap11
Test log: -------- tst_hugepage.c:83: TINFO: 1 hugepage(s) reserved tst_test.c:1558: TINFO: Timeout per run is 0h 05m 00s hugemmap11.c:47: TFAIL: Memory mismatch after Direct-IO write
Links: - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.1.y/build/v6.1.55... - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.1.y/build/v6.1.55...
* bcm2711-rpi-4-b, ltp-dio * bcm2711-rpi-4-b-clang, ltp-dio * bcm2711-rpi-4-b-64k_page_size, ltp-dio - dio01 - dio02 - dio03 - dio05 - dio06 - dio07 - dio08 - dio09 - dio11
Test log: -------- compare_file: char mismatch: infile offset 4096: 0x01 . outfile offset 4096: 0x00 . diotest01 1 TFAIL : diotest1.c:158: file compare failed for infile and outfile bufcmp: offset 0: Expected: 0x1, got 0x0 bufcmp: offset 0: Expected: 0x1, got 0x0 diotest02 1 TPASS : Read with Direct IO, Write without diotest02 2 TFAIL : diotest2.c:119: read/write comparision failed diotest02 3 TFAIL : diotest2.c:210: Write with Direct IO, Read without diotest02 4 TFAIL : diotest2.c:119: read/write comparision failed diotest02 5 TFAIL : diotest2.c:231: Read, Write with Direct IO diotest02 0 TINFO : 2/3 testblocks failed bufcmp: offset 0: Expected: 0x1, got 0x0 diotest03 1 TPASS : Read with Direct IO, Write without diotest03 2 TFAIL : diotest3.c:136: comparsion failed; child=0 offset=0 diotest03 3 TFAIL : diotest3.c:189: Write Direct-child 0 failed bufcmp: offset 0: Expected: 0x1, got 0x0 diotest03 1 TPASS : Read with Direct IO, Write without diotest03 2 TFAIL : diotest3.c:306: Write with Direct IO, Read without diotest03 3 TFAIL : diotest3.c:136: comparsion failed; child=0 offset=0 diotest03 4 TFAIL : diotest3.c:210: RDWR Direct-child 0 failed diotest03 1 TPASS : Read with Direct IO, Write without diotest03 2 TFAIL : diotest3.c:306: Write with Direct IO, Read without diotest03 3 TFAIL : diotest3.c:323: Read, Write with Direct IO ... diotest05 1 TPASS : Read with Direct IO, Write without diotest05 2 TFAIL : diotest5.c:141: readv/writev comparision failed diotest05 3 TFAIL : diotest5.c:250: Write with Direct IO, Read without diotest05 4 TFAIL : diotest5.c:141: readv/writev comparision failed diotest05 5 TFAIL : diotest5.c:271: Read, Write with Direct IO diotest05 0 TINFO : 2/3 testblocks failed
Links: - https://lkft.validation.linaro.org/scheduler/job/6842177#L1666 - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.1.y/build/v6.1.55...
## Metric Regressions (compared to v6.1.55)
## Test Fixes (compared to v6.1.55)
## Metric Fixes (compared to v6.1.55)
## Test result summary total: 121166, pass: 102582, fail: 2234, skip: 16177, xfail: 173
## Build Summary * arc: 4 total, 4 passed, 0 failed * arm: 140 total, 140 passed, 0 failed * arm64: 49 total, 49 passed, 0 failed * i386: 33 total, 33 passed, 0 failed * mips: 24 total, 24 passed, 0 failed * parisc: 3 total, 3 passed, 0 failed * powerpc: 34 total, 34 passed, 0 failed * riscv: 12 total, 12 passed, 0 failed * s390: 12 total, 12 passed, 0 failed * sh: 11 total, 11 passed, 0 failed * sparc: 6 total, 6 passed, 0 failed * x86_64: 40 total, 40 passed, 0 failed
## Test suites summary * boot * kselftest-android * kselftest-arm64 * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-drivers-dma-buf * kselftest-efivarfs * kselftest-exec * kselftest-filesystems * kselftest-filesystems-binderfs * kselftest-filesystems-epoll * kselftest-firmware * kselftest-fpu * kselftest-ftrace * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-membarrier * kselftest-memfd * kselftest-memory-hotplug * kselftest-mincore * kselftest-mount * kselftest-mqueue * kselftest-net * kselftest-net-forwarding * kselftest-net-mptcp * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-splice * kselftest-static_keys * kselftest-sync * kselftest-sysctl * kselftest-tc-testing * kselftest-timens * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-user_events * kselftest-vDSO * kselftest-vm * kselftest-watchdog * kselftest-x86 * kselftest-zram * kunit * kvm-unit-tests * libgpiod * log-parser-boot * log-parser-test * ltp-cap_bounds * ltp-commands * ltp-containers * ltp-controllers * ltp-cpuhotplug * ltp-crypto * ltp-cve * ltp-dio * ltp-fcntl-locktests * ltp-filecaps * ltp-fs * ltp-fs_bind * ltp-fs_perms_simple * ltp-fsx * ltp-hugetlb * ltp-io * ltp-ipc * ltp-math * ltp-mm * ltp-nptl * ltp-pty * ltp-sched * ltp-securebits * ltp-smoke * ltp-syscalls * ltp-tracing * network-basic-tests * perf * rcutorture * v4l2-compliance
-- Linaro LKFT https://lkft.linaro.org
Hi Naresh,
On Wed, 4 Oct 2023 at 23:41, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. Regressions on arm64 bcm2711-rpi-4-b device running LTP dio tests on
Could you please note in your reports also LTP version? FYI the best LTP release is always the latest release or git master branch.
Kind regards, Petr
NFS mounted rootfs. and LTP hugetlb hugemmap11 test case failed on x86 and arm64 bcm2711-rpi-4-b.
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
LTP hugetlb tests failed log tst_hugepage.c:83: TINFO: 1 hugepage(s) reserved tst_test.c:1558: TINFO: Timeout per run is 0h 05m 00s hugemmap11.c:47: TFAIL: Memory mismatch after Direct-IO write
LTP dio tests failed log compare_file: char mismatch: infile offset 4096: 0x01 . outfile offset 4096: 0x00 . diotest01 1 TFAIL : diotest1.c:158: file compare failed for infile and outfile
## Build
- kernel: 6.1.56-rc1
- git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
- git branch: linux-6.1.y
- git commit: 0353a7bfd2b60c5e42c8651eb3fa4cc48159db5f
- git describe: v6.1.55-260-g0353a7bfd2b6
- test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.1.y/build/v6.1.55...
## Test Regressions (compared to v6.1.55)
- x86_64-clang, ltp-hugetlb
- bcm2711-rpi-4-b, ltp-hugetlb
- bcm2711-rpi-4-b-clang, ltp-hugetlb
- bcm2711-rpi-4-b-64k_page_size, ltp-hugetlb
- hugemmap11
Test log:
tst_hugepage.c:83: TINFO: 1 hugepage(s) reserved tst_test.c:1558: TINFO: Timeout per run is 0h 05m 00s hugemmap11.c:47: TFAIL: Memory mismatch after Direct-IO write
Links:
- bcm2711-rpi-4-b, ltp-dio
- bcm2711-rpi-4-b-clang, ltp-dio
- bcm2711-rpi-4-b-64k_page_size, ltp-dio
- dio01
- dio02
- dio03
- dio05
- dio06
- dio07
- dio08
- dio09
- dio11
Test log:
compare_file: char mismatch: infile offset 4096: 0x01 . outfile offset 4096: 0x00 . diotest01 1 TFAIL : diotest1.c:158: file compare failed for infile and outfile bufcmp: offset 0: Expected: 0x1, got 0x0 bufcmp: offset 0: Expected: 0x1, got 0x0 diotest02 1 TPASS : Read with Direct IO, Write without diotest02 2 TFAIL : diotest2.c:119: read/write comparision failed diotest02 3 TFAIL : diotest2.c:210: Write with Direct IO, Read without diotest02 4 TFAIL : diotest2.c:119: read/write comparision failed diotest02 5 TFAIL : diotest2.c:231: Read, Write with Direct IO diotest02 0 TINFO : 2/3 testblocks failed bufcmp: offset 0: Expected: 0x1, got 0x0 diotest03 1 TPASS : Read with Direct IO, Write without diotest03 2 TFAIL : diotest3.c:136: comparsion failed; child=0 offset=0 diotest03 3 TFAIL : diotest3.c:189: Write Direct-child 0 failed bufcmp: offset 0: Expected: 0x1, got 0x0 diotest03 1 TPASS : Read with Direct IO, Write without diotest03 2 TFAIL : diotest3.c:306: Write with Direct IO, Read without diotest03 3 TFAIL : diotest3.c:136: comparsion failed; child=0 offset=0 diotest03 4 TFAIL : diotest3.c:210: RDWR Direct-child 0 failed diotest03 1 TPASS : Read with Direct IO, Write without diotest03 2 TFAIL : diotest3.c:306: Write with Direct IO, Read without diotest03 3 TFAIL : diotest3.c:323: Read, Write with Direct IO ... diotest05 1 TPASS : Read with Direct IO, Write without diotest05 2 TFAIL : diotest5.c:141: readv/writev comparision failed diotest05 3 TFAIL : diotest5.c:250: Write with Direct IO, Read without diotest05 4 TFAIL : diotest5.c:141: readv/writev comparision failed diotest05 5 TFAIL : diotest5.c:271: Read, Write with Direct IO diotest05 0 TINFO : 2/3 testblocks failed
Links:
## Metric Regressions (compared to v6.1.55)
## Test Fixes (compared to v6.1.55)
## Metric Fixes (compared to v6.1.55)
## Test result summary total: 121166, pass: 102582, fail: 2234, skip: 16177, xfail: 173
## Build Summary
- arc: 4 total, 4 passed, 0 failed
- arm: 140 total, 140 passed, 0 failed
- arm64: 49 total, 49 passed, 0 failed
- i386: 33 total, 33 passed, 0 failed
- mips: 24 total, 24 passed, 0 failed
- parisc: 3 total, 3 passed, 0 failed
- powerpc: 34 total, 34 passed, 0 failed
- riscv: 12 total, 12 passed, 0 failed
- s390: 12 total, 12 passed, 0 failed
- sh: 11 total, 11 passed, 0 failed
- sparc: 6 total, 6 passed, 0 failed
- x86_64: 40 total, 40 passed, 0 failed
## Test suites summary
- boot
- kselftest-android
- kselftest-arm64
- kselftest-breakpoints
- kselftest-capabilities
- kselftest-cgroup
- kselftest-clone3
- kselftest-core
- kselftest-cpu-hotplug
- kselftest-cpufreq
- kselftest-drivers-dma-buf
- kselftest-efivarfs
- kselftest-exec
- kselftest-filesystems
- kselftest-filesystems-binderfs
- kselftest-filesystems-epoll
- kselftest-firmware
- kselftest-fpu
- kselftest-ftrace
- kselftest-futex
- kselftest-gpio
- kselftest-intel_pstate
- kselftest-ipc
- kselftest-ir
- kselftest-kcmp
- kselftest-kexec
- kselftest-kvm
- kselftest-lib
- kselftest-membarrier
- kselftest-memfd
- kselftest-memory-hotplug
- kselftest-mincore
- kselftest-mount
- kselftest-mqueue
- kselftest-net
- kselftest-net-forwarding
- kselftest-net-mptcp
- kselftest-netfilter
- kselftest-nsfs
- kselftest-openat2
- kselftest-pid_namespace
- kselftest-pidfd
- kselftest-proc
- kselftest-pstore
- kselftest-ptrace
- kselftest-rseq
- kselftest-rtc
- kselftest-seccomp
- kselftest-sigaltstack
- kselftest-size
- kselftest-splice
- kselftest-static_keys
- kselftest-sync
- kselftest-sysctl
- kselftest-tc-testing
- kselftest-timens
- kselftest-tmpfs
- kselftest-tpm2
- kselftest-user
- kselftest-user_events
- kselftest-vDSO
- kselftest-vm
- kselftest-watchdog
- kselftest-x86
- kselftest-zram
- kunit
- kvm-unit-tests
- libgpiod
- log-parser-boot
- log-parser-test
- ltp-cap_bounds
- ltp-commands
- ltp-containers
- ltp-controllers
- ltp-cpuhotplug
- ltp-crypto
- ltp-cve
- ltp-dio
- ltp-fcntl-locktests
- ltp-filecaps
- ltp-fs
- ltp-fs_bind
- ltp-fs_perms_simple
- ltp-fsx
- ltp-hugetlb
- ltp-io
- ltp-ipc
- ltp-math
- ltp-mm
- ltp-nptl
- ltp-pty
- ltp-sched
- ltp-securebits
- ltp-smoke
- ltp-syscalls
- ltp-tracing
- network-basic-tests
- perf
- rcutorture
- v4l2-compliance
On Thu, 5 Oct 2023 at 22:54, Petr Vorel pvorel@suse.cz wrote:
Hi Naresh,
On Wed, 4 Oct 2023 at 23:41, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. Regressions on arm64 bcm2711-rpi-4-b device running LTP dio tests on
Could you please note in your reports also LTP version?
Sure. We are running LTP Version: 20230516 for our testing.
We will update the latest LTP release (20230929) next week.
FYI the best LTP release is always the latest release or git master branch.
We have two threads here. 1) LTP release tag testing on all stable-rc branches 2) LTP master testing on a given specific kernel version [a]
[a] https://qa-reports.linaro.org/lkft/ltp-master/
- Naresh
On Thu, 5 Oct 2023 at 22:54, Petr Vorel pvorel@suse.cz wrote:
Hi Naresh,
On Wed, 4 Oct 2023 at 23:41, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. Regressions on arm64 bcm2711-rpi-4-b device running LTP dio tests on
Could you please note in your reports also LTP version?
Sure. We are running LTP Version: 20230516 for our testing.
We will update the latest LTP release (20230929) next week.
Great, thank you.
FYI the best LTP release is always the latest release or git master branch.
We have two threads here.
- LTP release tag testing on all stable-rc branches
- LTP master testing on a given specific kernel version [a]
Great, this makes sense.
BTW from looking in the log [b] ("INFO: ltp-pan reported some tests FAIL") I see you use runltp. We recommend to switch to kirk [c]. And we definitely appreciate your feedback from it.
Kind regards, Petr
[b] https://qa-reports.linaro.org/lkft/ltp-master/build/v6.5.3_20230929-2-g48a15... [c] https://github.com/linux-test-project/kirk/#readme
- Naresh
Hello!
On Thu, 5 Oct 2023 at 10:40, Naresh Kamboju naresh.kamboju@linaro.org wrote:
On Wed, 4 Oct 2023 at 23:41, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. Regressions on arm64 bcm2711-rpi-4-b device running LTP dio tests on NFS mounted rootfs. and LTP hugetlb hugemmap11 test case failed on x86 and arm64 bcm2711-rpi-4-b.
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
LTP hugetlb tests failed log tst_hugepage.c:83: TINFO: 1 hugepage(s) reserved tst_test.c:1558: TINFO: Timeout per run is 0h 05m 00s hugemmap11.c:47: TFAIL: Memory mismatch after Direct-IO write
LTP dio tests failed log compare_file: char mismatch: infile offset 4096: 0x01 . outfile offset 4096: 0x00 . diotest01 1 TFAIL : diotest1.c:158: file compare failed for infile and outfile
Bisection led to "NFS: Fix O_DIRECT locking issues" (upstream commit 7c6339322ce0c6128acbe36aacc1eeb986dd7bf1). Reverting that patch and "NFS: Fix error handling for O_DIRECT write scheduling" (upstream commit 954998b60caa8f2a3bf3abe490de6f08d283687a) (not a clean revert this one) made ltp-dio pass again.
Greetings!
Daniel Díaz daniel.diaz@linaro.org
On Fri, Oct 06, 2023 at 12:42:04PM -0600, Daniel Díaz wrote:
Hello!
On Thu, 5 Oct 2023 at 10:40, Naresh Kamboju naresh.kamboju@linaro.org wrote:
On Wed, 4 Oct 2023 at 23:41, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. Regressions on arm64 bcm2711-rpi-4-b device running LTP dio tests on NFS mounted rootfs. and LTP hugetlb hugemmap11 test case failed on x86 and arm64 bcm2711-rpi-4-b.
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
LTP hugetlb tests failed log tst_hugepage.c:83: TINFO: 1 hugepage(s) reserved tst_test.c:1558: TINFO: Timeout per run is 0h 05m 00s hugemmap11.c:47: TFAIL: Memory mismatch after Direct-IO write
LTP dio tests failed log compare_file: char mismatch: infile offset 4096: 0x01 . outfile offset 4096: 0x00 . diotest01 1 TFAIL : diotest1.c:158: file compare failed for infile and outfile
Bisection led to "NFS: Fix O_DIRECT locking issues" (upstream commit 7c6339322ce0c6128acbe36aacc1eeb986dd7bf1). Reverting that patch and "NFS: Fix error handling for O_DIRECT write scheduling" (upstream commit 954998b60caa8f2a3bf3abe490de6f08d283687a) (not a clean revert this one) made ltp-dio pass again.
So this is also an issue in Linus's tree? Or is it only on the 6.1.y tree.
thanks,
greg k-h
On Sat, 7 Oct 2023 at 14:28, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
On Fri, Oct 06, 2023 at 12:42:04PM -0600, Daniel Díaz wrote:
Hello!
On Thu, 5 Oct 2023 at 10:40, Naresh Kamboju naresh.kamboju@linaro.org wrote:
On Wed, 4 Oct 2023 at 23:41, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. Regressions on arm64 bcm2711-rpi-4-b device running LTP dio tests on NFS mounted rootfs. and LTP hugetlb hugemmap11 test case failed on x86 and arm64 bcm2711-rpi-4-b.
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
LTP hugetlb tests failed log tst_hugepage.c:83: TINFO: 1 hugepage(s) reserved tst_test.c:1558: TINFO: Timeout per run is 0h 05m 00s hugemmap11.c:47: TFAIL: Memory mismatch after Direct-IO write
LTP dio tests failed log compare_file: char mismatch: infile offset 4096: 0x01 . outfile offset 4096: 0x00 . diotest01 1 TFAIL : diotest1.c:158: file compare failed for infile and outfile
Bisection led to "NFS: Fix O_DIRECT locking issues" (upstream commit 7c6339322ce0c6128acbe36aacc1eeb986dd7bf1). Reverting that patch and "NFS: Fix error handling for O_DIRECT write scheduling" (upstream commit 954998b60caa8f2a3bf3abe490de6f08d283687a) (not a clean revert this one) made ltp-dio pass again.
So this is also an issue in Linus's tree? Or is it only on the 6.1.y
It is only on the 6.1.y branch.
- Naresh
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
Compiled and booted on my x86_64 and ARM64 test systems. No errors or regressions.
Tested-by: Allen Pais apais@linux.microsoft.com
Thanks.
On Wed, Oct 04, 2023 at 07:52:53PM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
Build results: total: 157 pass: 155 fail: 2 Failed builds: i386:tools/perf x86_64:tools/perf Qemu test results: total: 529 pass: 529 fail: 0
Guenter
On 10/4/23 10:52 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos re@w6rz.net
On Wed, 04 Oct 2023 19:52:53 +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.56 release. There are 259 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 06 Oct 2023 17:51:12 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.56-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v6.1: 10 builds: 10 pass, 0 fail 26 boots: 26 pass, 0 fail 116 tests: 116 pass, 0 fail
Linux version: 6.1.56-rc1-g0353a7bfd2b6 Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000, tegra20-ventana, tegra210-p2371-2180, tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Jon Hunter jonathanh@nvidia.com
Jon
linux-stable-mirror@lists.linaro.org