From: Hugh Dickins hughd@google.com

[ Upstream commit 243bce09c91b0145aeaedd5afba799d81841c030 ]

Chris Murphy reports that a slightly overcommitted load, testing swap and zram along with i915, splats and keeps on splatting, when it had better fail less noisily:

gnome-shell: page allocation failure: order:0, mode:0x400d0(__GFP_IO|__GFP_FS|__GFP_COMP|__GFP_RECLAIMABLE), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 2 PID: 1155 Comm: gnome-shell Not tainted 5.7.0-1.fc33.x86_64 #1 Call Trace: dump_stack+0x64/0x88 warn_alloc.cold+0x75/0xd9 __alloc_pages_slowpath.constprop.0+0xcfa/0xd30 __alloc_pages_nodemask+0x2df/0x320 alloc_slab_page+0x195/0x310 allocate_slab+0x3c5/0x440 ___slab_alloc+0x40c/0x5f0 __slab_alloc+0x1c/0x30 kmem_cache_alloc+0x20e/0x220 xas_nomem+0x28/0x70 add_to_swap_cache+0x321/0x400 __read_swap_cache_async+0x105/0x240 swap_cluster_readahead+0x22c/0x2e0 shmem_swapin+0x8e/0xc0 shmem_swapin_page+0x196/0x740 shmem_getpage_gfp+0x3a2/0xa60 shmem_read_mapping_page_gfp+0x32/0x60 shmem_get_pages+0x155/0x5e0 [i915] __i915_gem_object_get_pages+0x68/0xa0 [i915] i915_vma_pin+0x3fe/0x6c0 [i915] eb_add_vma+0x10b/0x2c0 [i915] i915_gem_do_execbuffer+0x704/0x3430 [i915] i915_gem_execbuffer2_ioctl+0x1ea/0x3e0 [i915] drm_ioctl_kernel+0x86/0xd0 [drm] drm_ioctl+0x206/0x390 [drm] ksys_ioctl+0x82/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5b/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported on 5.7, but it goes back really to 3.1: when shmem_read_mapping_page_gfp() was implemented for use by i915, and allowed for __GFP_NORETRY and __GFP_NOWARN flags in most places, but missed swapin's "& GFP_KERNEL" mask for page tree node allocation in __read_swap_cache_async() - that was to mask off HIGHUSER_MOVABLE bits from what page cache uses, but GFP_RECLAIM_MASK is now what's needed.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=208085 Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2006151330070.11064@eggly.anvils Fixes: 68da9f055755 ("tmpfs: pass gfp to shmem_getpage_gfp") Signed-off-by: Hugh Dickins hughd@google.com Reviewed-by: Vlastimil Babka vbabka@suse.cz Reviewed-by: Matthew Wilcox (Oracle) willy@infradead.org Reported-by: Chris Murphy lists@colorremedies.com Analyzed-by: Vlastimil Babka vbabka@suse.cz Analyzed-by: Matthew Wilcox willy@infradead.org Tested-by: Chris Murphy lists@colorremedies.com Cc: stable@vger.kernel.org [3.1+] Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- mm/swap_state.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/mm/swap_state.c b/mm/swap_state.c index ecee9c6c4cc17..09731f4174c7e 100644 --- a/mm/swap_state.c +++ b/mm/swap_state.c @@ -23,6 +23,7 @@ #include <linux/huge_mm.h>

#include <asm/pgtable.h> +#include "internal.h"

/* * swapper_space is a fiction, retained to simplify the path through @@ -416,7 +417,7 @@ struct page *__read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask, /* * call radix_tree_preload() while we can wait. */ - err = radix_tree_maybe_preload(gfp_mask & GFP_KERNEL); + err = radix_tree_maybe_preload(gfp_mask & GFP_RECLAIM_MASK); if (err) break;

From: Tuomas Tynkkynen tuomas.tynkkynen@iki.fi

[ Upstream commit b835a71ef64a61383c414d6bf2896d2c0161deca ]

Syzbot reports an use-after-free in workqueue context:

BUG: KASAN: use-after-free in mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737 mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737 __smsc95xx_mdio_read drivers/net/usb/smsc95xx.c:217 [inline] smsc95xx_mdio_read+0x583/0x870 drivers/net/usb/smsc95xx.c:278 check_carrier+0xd1/0x2e0 drivers/net/usb/smsc95xx.c:644 process_one_work+0x777/0xf90 kernel/workqueue.c:2274 worker_thread+0xa8f/0x1430 kernel/workqueue.c:2420 kthread+0x2df/0x300 kernel/kthread.c:255

It looks like that smsc95xx_unbind() is freeing the structures that are still in use by the concurrently running workqueue callback. Thus switch to using cancel_delayed_work_sync() to ensure the work callback really is no longer active.

Reported-by: syzbot+29dc7d4ae19b703ff947@syzkaller.appspotmail.com Signed-off-by: Tuomas Tynkkynen tuomas.tynkkynen@iki.fi Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/smsc95xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 6e971628bb50a..c3389bd87c654 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1338,7 +1338,7 @@ static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf) struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);

if (pdata) { - cancel_delayed_work(&pdata->carrier_check); + cancel_delayed_work_sync(&pdata->carrier_check); netif_dbg(dev, ifdown, dev->net, "free pdata\n"); kfree(pdata); pdata = NULL;

From: Qian Cai cai@lca.pw

[ Upstream commit a68ee0573991e90af2f1785db309206408bad3e5 ]

There is no need to copy SLUB_STATS items from root memcg cache to new memcg cache copies. Doing so could result in stack overruns because the store function only accepts 0 to clear the stat and returns an error for everything else while the show method would print out the whole stat.

Then, the mismatch of the lengths returns from show and store methods happens in memcg_propagate_slab_attrs():

else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf)) buf = mbuf;

max_attr_size is only 2 from slab_attr_store(), then, it uses mbuf[64] in show_stat() later where a bounch of sprintf() would overrun the stack variable. Fix it by always allocating a page of buffer to be used in show_stat() if SLUB_STATS=y which should only be used for debug purpose.

# echo 1 > /sys/kernel/slab/fs_cache/shrink BUG: KASAN: stack-out-of-bounds in number+0x421/0x6e0 Write of size 1 at addr ffffc900256cfde0 by task kworker/76:0/53251

Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: memcg_kmem_cache memcg_kmem_cache_create_func Call Trace: number+0x421/0x6e0 vsnprintf+0x451/0x8e0 sprintf+0x9e/0xd0 show_stat+0x124/0x1d0 alloc_slowpath_show+0x13/0x20 __kmem_cache_create+0x47a/0x6b0

addr ffffc900256cfde0 is located in stack of task kworker/76:0/53251 at offset 0 in frame: process_one_work+0x0/0xb90

this frame has 1 object: [32, 72) 'lockdep_map'

Memory state around the buggy address: ffffc900256cfc80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffc900256cfd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

ffffc900256cfd80: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1

^ ffffc900256cfe00: 00 00 00 00 00 f2 f2 f2 00 00 00 00 00 00 00 00 ffffc900256cfe80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: __kmem_cache_create+0x6ac/0x6b0 Workqueue: memcg_kmem_cache memcg_kmem_cache_create_func Call Trace: __kmem_cache_create+0x6ac/0x6b0

Fixes: 107dab5c92d5 ("slub: slub-specific propagation changes") Signed-off-by: Qian Cai cai@lca.pw Signed-off-by: Andrew Morton akpm@linux-foundation.org Cc: Glauber Costa glauber@scylladb.com Cc: Christoph Lameter cl@linux.com Cc: Pekka Enberg penberg@kernel.org Cc: David Rientjes rientjes@google.com Cc: Joonsoo Kim iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/20200429222356.4322-1-cai@lca.pw Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- mm/slub.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/mm/slub.c b/mm/slub.c index 473e0a8afb802..882a1e0ae89c8 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -5610,7 +5610,8 @@ static void memcg_propagate_slab_attrs(struct kmem_cache *s) */ if (buffer) buf = buffer; - else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf)) + else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf) && + !IS_ENABLED(CONFIG_SLUB_STATS)) buf = mbuf; else { buffer = (char *) get_zeroed_page(GFP_KERNEL);

From: Christian Borntraeger borntraeger@de.ibm.com

[ Upstream commit 827c4913923e0b441ba07ba4cc41e01181102303 ]

When specifying insanely large debug buffers a kernel warning is printed. The debug code does handle the error gracefully, though. Instead of duplicating the check let us silence the warning to avoid crashes when panic_on_warn is used.

Signed-off-by: Christian Borntraeger borntraeger@de.ibm.com Reviewed-by: Heiko Carstens heiko.carstens@de.ibm.com Signed-off-by: Heiko Carstens heiko.carstens@de.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/kernel/debug.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index d374f9b218b4c..04bbf7e97fea7 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -198,9 +198,10 @@ static debug_entry_t ***debug_areas_alloc(int pages_per_area, int nr_areas) if (!areas) goto fail_malloc_areas; for (i = 0; i < nr_areas; i++) { + /* GFP_NOWARN to avoid user triggerable WARN, we handle fails */ areas[i] = kmalloc_array(pages_per_area, sizeof(debug_entry_t *), - GFP_KERNEL); + GFP_KERNEL | __GFP_NOWARN); if (!areas[i]) goto fail_malloc_areas2; for (j = 0; j < pages_per_area; j++) {

From: Sagi Grimberg sagi@grimberg.me

[ Upstream commit 3b4b19721ec652ad2c4fe51dfbe5124212b5f581 ]

Revert fab7772bfbcf ("nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns")

When adding a new namespace to the head disk (via nvme_mpath_set_live) we will see partition scan which triggers I/O on the mpath device node. This process will usually be triggered from the scan_work which holds the scan_lock. If I/O blocks (if we got ana change currently have only available paths but none are accessible) this can deadlock on the head disk bd_mutex as both partition scan I/O takes it, and head disk revalidation takes it to check for resize (also triggered from scan_work on a different path). See trace [1].

The mpath disk revalidation was originally added to detect online disk size change, but this is no longer needed since commit cb224c3af4df ("nvme: Convert to use set_capacity_revalidate_and_notify") which already updates resize info without unnecessarily revalidating the disk (the mpath disk doesn't even implement .revalidate_disk fop).

[1]: -- kernel: INFO: task kworker/u65:9:494 blocked for more than 241 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u65:9 D 0 494 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: schedule_preempt_disabled+0xe/0x10 kernel: __mutex_lock.isra.0+0x182/0x4f0 kernel: __mutex_lock_slowpath+0x13/0x20 kernel: mutex_lock+0x2e/0x40 kernel: revalidate_disk+0x63/0xa0 kernel: __nvme_revalidate_disk+0xfe/0x110 [nvme_core] kernel: nvme_revalidate_disk+0xa4/0x160 [nvme_core] kernel: ? evict+0x14c/0x1b0 kernel: revalidate_disk+0x2b/0xa0 kernel: nvme_validate_ns+0x49/0x940 [nvme_core] kernel: ? blk_mq_free_request+0xd2/0x100 kernel: ? __nvme_submit_sync_cmd+0xbe/0x1e0 [nvme_core] kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x1f/0x40 ... kernel: INFO: task kworker/u65:1:2630 blocked for more than 241 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u65:1 D 0 2630 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: ? __switch_to_asm+0x34/0x70 kernel: ? file_fdatawait_range+0x30/0x30 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: ? kmem_cache_alloc_trace+0x19c/0x230 kernel: efi_partition+0x1e6/0x708 kernel: ? vsnprintf+0x39e/0x4e0 kernel: ? snprintf+0x49/0x60 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: ? nvme_update_ns_ana_state+0x60/0x60 [nvme_core] kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: ? blk_mq_free_request+0xd2/0x100 kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x1f/0x40 --

Fixes: fab7772bfbcf ("nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns") Signed-off-by: Anton Eidelman anton@lightbitslabs.com Signed-off-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/core.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 0d60f2f8f3eec..5c9326777334f 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1602,7 +1602,6 @@ static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id) if (ns->head->disk) { nvme_update_disk_info(ns->head->disk, ns, id); blk_queue_stack_limits(ns->head->disk->queue, ns->queue); - revalidate_disk(ns->head->disk); } #endif }

From: Douglas Anderson dianders@chromium.org

[ Upstream commit 440ab9e10e2e6e5fd677473ee6f9e3af0f6904d6 ]

At times when I'm using kgdb I see a splat on my console about suspicious RCU usage. I managed to come up with a case that could reproduce this that looked like this:

WARNING: suspicious RCU usage 5.7.0-rc4+ #609 Not tainted ----------------------------- kernel/pid.c:395 find_task_by_pid_ns() needs rcu_read_lock() protection!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1 3 locks held by swapper/0/1: #0: ffffff81b6b8e988 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x13c #1: ffffffd01109e9e8 (dbg_master_lock){....}-{2:2}, at: kgdb_cpu_enter+0x20c/0x7ac #2: ffffffd01109ea90 (dbg_slave_lock){....}-{2:2}, at: kgdb_cpu_enter+0x3ec/0x7ac

stack backtrace: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc4+ #609 Hardware name: Google Cheza (rev3+) (DT) Call trace: dump_backtrace+0x0/0x1b8 show_stack+0x1c/0x24 dump_stack+0xd4/0x134 lockdep_rcu_suspicious+0xf0/0x100 find_task_by_pid_ns+0x5c/0x80 getthread+0x8c/0xb0 gdb_serial_stub+0x9d4/0xd04 kgdb_cpu_enter+0x284/0x7ac kgdb_handle_exception+0x174/0x20c kgdb_brk_fn+0x24/0x30 call_break_hook+0x6c/0x7c brk_handler+0x20/0x5c do_debug_exception+0x1c8/0x22c el1_sync_handler+0x3c/0xe4 el1_sync+0x7c/0x100 rpmh_rsc_probe+0x38/0x420 platform_drv_probe+0x94/0xb4 really_probe+0x134/0x300 driver_probe_device+0x68/0x100 __device_attach_driver+0x90/0xa8 bus_for_each_drv+0x84/0xcc __device_attach+0xb4/0x13c device_initial_probe+0x18/0x20 bus_probe_device+0x38/0x98 device_add+0x38c/0x420

If I understand properly we should just be able to blanket kgdb under one big RCU read lock and the problem should go away. We'll add it to the beast-of-a-function known as kgdb_cpu_enter().

With this I no longer get any splats and things seem to work fine.

Signed-off-by: Douglas Anderson dianders@chromium.org Link: https://lore.kernel.org/r/20200602154729.v2.1.I70e0d4fd46d5ed2aaf0c98a355e8e... Signed-off-by: Daniel Thompson daniel.thompson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/debug/debug_core.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c index 6a1dc2613bb92..fbb1bfdd2fa53 100644 --- a/kernel/debug/debug_core.c +++ b/kernel/debug/debug_core.c @@ -489,6 +489,7 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs, arch_kgdb_ops.disable_hw_break(regs);

acquirelock: + rcu_read_lock(); /* * Interrupts will be restored by the 'trap return' code, except when * single stepping. @@ -545,6 +546,7 @@ return_normal: atomic_dec(&slaves_in_kgdb); dbg_touch_watchdogs(); local_irq_restore(flags); + rcu_read_unlock(); return 0; } cpu_relax(); @@ -563,6 +565,7 @@ return_normal: raw_spin_unlock(&dbg_master_lock); dbg_touch_watchdogs(); local_irq_restore(flags); + rcu_read_unlock();

goto acquirelock; } @@ -686,6 +689,7 @@ kgdb_restore: raw_spin_unlock(&dbg_master_lock); dbg_touch_watchdogs(); local_irq_restore(flags); + rcu_read_unlock();

return kgdb_info[cpu].ret_state; }

From: Chen Tao chentao107@huawei.com

[ Upstream commit aa472721c8dbe1713cf510f56ffbc56ae9e14247 ]

Fix to return negative error code -ENOMEM with the use of ERR_PTR from dpu_encoder_init.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Chen Tao chentao107@huawei.com Signed-off-by: Rob Clark robdclark@chromium.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index ec3fd67378c18..19e2753ffe07c 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -2412,7 +2412,7 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev,

dpu_enc = devm_kzalloc(dev->dev, sizeof(*dpu_enc), GFP_KERNEL); if (!dpu_enc) - return ERR_PTR(ENOMEM); + return ERR_PTR(-ENOMEM);

rc = drm_encoder_init(dev, &dpu_enc->base, &dpu_encoder_funcs, drm_enc_mode, NULL);

From: Rahul Lakkireddy rahul.lakkireddy@chelsio.com

[ Upstream commit 27f78cb245abdb86735529c13b0a579f57829e71 ]

TC-U32 passes all keys values and masks in __be32 format. The parser already expects this and hence pass the value and masks in __be32 natively to the parser.

Fixes following sparse warnings in several places: cxgb4_tc_u32.c:57:21: warning: incorrect type in assignment (different base types) cxgb4_tc_u32.c:57:21: expected unsigned int [usertype] val cxgb4_tc_u32.c:57:21: got restricted __be32 [usertype] val cxgb4_tc_u32_parse.h:48:24: warning: cast to restricted __be32

Fixes: 2e8aad7bf203 ("cxgb4: add parser to translate u32 filters to internal spec") Signed-off-by: Rahul Lakkireddy rahul.lakkireddy@chelsio.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c | 18 +-- .../chelsio/cxgb4/cxgb4_tc_u32_parse.h | 122 ++++++++++++------ 2 files changed, 91 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c index c7d2b4dc7568e..9fd0acd1cbd17 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c @@ -47,7 +47,7 @@ static int fill_match_fields(struct adapter *adap, bool next_header) { unsigned int i, j; - u32 val, mask; + __be32 val, mask; int off, err; bool found;

@@ -216,7 +216,7 @@ int cxgb4_config_knode(struct net_device *dev, struct tc_cls_u32_offload *cls) const struct cxgb4_next_header *next; bool found = false; unsigned int i, j; - u32 val, mask; + __be32 val, mask; int off;

if (t->table[link_uhtid - 1].link_handle) { @@ -230,10 +230,10 @@ int cxgb4_config_knode(struct net_device *dev, struct tc_cls_u32_offload *cls)

/* Try to find matches that allow jumps to next header. */ for (i = 0; next[i].jump; i++) { - if (next[i].offoff != cls->knode.sel->offoff || - next[i].shift != cls->knode.sel->offshift || - next[i].mask != cls->knode.sel->offmask || - next[i].offset != cls->knode.sel->off) + if (next[i].sel.offoff != cls->knode.sel->offoff || + next[i].sel.offshift != cls->knode.sel->offshift || + next[i].sel.offmask != cls->knode.sel->offmask || + next[i].sel.off != cls->knode.sel->off) continue;

/* Found a possible candidate. Find a key that @@ -245,9 +245,9 @@ int cxgb4_config_knode(struct net_device *dev, struct tc_cls_u32_offload *cls) val = cls->knode.sel->keys[j].val; mask = cls->knode.sel->keys[j].mask;

- if (next[i].match_off == off && - next[i].match_val == val && - next[i].match_mask == mask) { + if (next[i].key.off == off && + next[i].key.val == val && + next[i].key.mask == mask) { found = true; break; } diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h index a4b99edcc3399..141085e159e57 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h @@ -38,12 +38,12 @@ struct cxgb4_match_field { int off; /* Offset from the beginning of the header to match */ /* Fill the value/mask pair in the spec if matched */ - int (*val)(struct ch_filter_specification *f, u32 val, u32 mask); + int (*val)(struct ch_filter_specification *f, __be32 val, __be32 mask); };

/* IPv4 match fields */ static inline int cxgb4_fill_ipv4_tos(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { f->val.tos = (ntohl(val) >> 16) & 0x000000FF; f->mask.tos = (ntohl(mask) >> 16) & 0x000000FF; @@ -52,7 +52,7 @@ static inline int cxgb4_fill_ipv4_tos(struct ch_filter_specification *f, }

static inline int cxgb4_fill_ipv4_frag(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { u32 mask_val; u8 frag_val; @@ -74,7 +74,7 @@ static inline int cxgb4_fill_ipv4_frag(struct ch_filter_specification *f, }

static inline int cxgb4_fill_ipv4_proto(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { f->val.proto = (ntohl(val) >> 16) & 0x000000FF; f->mask.proto = (ntohl(mask) >> 16) & 0x000000FF; @@ -83,7 +83,7 @@ static inline int cxgb4_fill_ipv4_proto(struct ch_filter_specification *f, }

static inline int cxgb4_fill_ipv4_src_ip(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.fip[0], &val, sizeof(u32)); memcpy(&f->mask.fip[0], &mask, sizeof(u32)); @@ -92,7 +92,7 @@ static inline int cxgb4_fill_ipv4_src_ip(struct ch_filter_specification *f, }

static inline int cxgb4_fill_ipv4_dst_ip(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.lip[0], &val, sizeof(u32)); memcpy(&f->mask.lip[0], &mask, sizeof(u32)); @@ -111,7 +111,7 @@ static const struct cxgb4_match_field cxgb4_ipv4_fields[] = {

/* IPv6 match fields */ static inline int cxgb4_fill_ipv6_tos(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { f->val.tos = (ntohl(val) >> 20) & 0x000000FF; f->mask.tos = (ntohl(mask) >> 20) & 0x000000FF; @@ -120,7 +120,7 @@ static inline int cxgb4_fill_ipv6_tos(struct ch_filter_specification *f, }

static inline int cxgb4_fill_ipv6_proto(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { f->val.proto = (ntohl(val) >> 8) & 0x000000FF; f->mask.proto = (ntohl(mask) >> 8) & 0x000000FF; @@ -129,7 +129,7 @@ static inline int cxgb4_fill_ipv6_proto(struct ch_filter_specification *f, }

static inline int cxgb4_fill_ipv6_src_ip0(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.fip[0], &val, sizeof(u32)); memcpy(&f->mask.fip[0], &mask, sizeof(u32)); @@ -138,7 +138,7 @@ static inline int cxgb4_fill_ipv6_src_ip0(struct ch_filter_specification *f, }

static inline int cxgb4_fill_ipv6_src_ip1(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.fip[4], &val, sizeof(u32)); memcpy(&f->mask.fip[4], &mask, sizeof(u32)); @@ -147,7 +147,7 @@ static inline int cxgb4_fill_ipv6_src_ip1(struct ch_filter_specification *f, }

static inline int cxgb4_fill_ipv6_src_ip2(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.fip[8], &val, sizeof(u32)); memcpy(&f->mask.fip[8], &mask, sizeof(u32)); @@ -156,7 +156,7 @@ static inline int cxgb4_fill_ipv6_src_ip2(struct ch_filter_specification *f, }

static inline int cxgb4_fill_ipv6_src_ip3(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.fip[12], &val, sizeof(u32)); memcpy(&f->mask.fip[12], &mask, sizeof(u32)); @@ -165,7 +165,7 @@ static inline int cxgb4_fill_ipv6_src_ip3(struct ch_filter_specification *f, }

static inline int cxgb4_fill_ipv6_dst_ip0(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.lip[0], &val, sizeof(u32)); memcpy(&f->mask.lip[0], &mask, sizeof(u32)); @@ -174,7 +174,7 @@ static inline int cxgb4_fill_ipv6_dst_ip0(struct ch_filter_specification *f, }

static inline int cxgb4_fill_ipv6_dst_ip1(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.lip[4], &val, sizeof(u32)); memcpy(&f->mask.lip[4], &mask, sizeof(u32)); @@ -183,7 +183,7 @@ static inline int cxgb4_fill_ipv6_dst_ip1(struct ch_filter_specification *f, }

static inline int cxgb4_fill_ipv6_dst_ip2(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.lip[8], &val, sizeof(u32)); memcpy(&f->mask.lip[8], &mask, sizeof(u32)); @@ -192,7 +192,7 @@ static inline int cxgb4_fill_ipv6_dst_ip2(struct ch_filter_specification *f, }

static inline int cxgb4_fill_ipv6_dst_ip3(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { memcpy(&f->val.lip[12], &val, sizeof(u32)); memcpy(&f->mask.lip[12], &mask, sizeof(u32)); @@ -216,7 +216,7 @@ static const struct cxgb4_match_field cxgb4_ipv6_fields[] = {

/* TCP/UDP match */ static inline int cxgb4_fill_l4_ports(struct ch_filter_specification *f, - u32 val, u32 mask) + __be32 val, __be32 mask) { f->val.fport = ntohl(val) >> 16; f->mask.fport = ntohl(mask) >> 16; @@ -237,19 +237,13 @@ static const struct cxgb4_match_field cxgb4_udp_fields[] = { };

struct cxgb4_next_header { - unsigned int offset; /* Offset to next header */ - /* offset, shift, and mask added to offset above + /* Offset, shift, and mask added to beginning of the header * to get to next header. Useful when using a header * field's value to jump to next header such as IHL field * in IPv4 header. */ - unsigned int offoff; - u32 shift; - u32 mask; - /* match criteria to make this jump */ - unsigned int match_off; - u32 match_val; - u32 match_mask; + struct tc_u32_sel sel; + struct tc_u32_key key; /* location of jump to make */ const struct cxgb4_match_field *jump; }; @@ -258,26 +252,74 @@ struct cxgb4_next_header { * IPv4 header. */ static const struct cxgb4_next_header cxgb4_ipv4_jumps[] = { - { .offset = 0, .offoff = 0, .shift = 6, .mask = 0xF, - .match_off = 8, .match_val = 0x600, .match_mask = 0xFF00, - .jump = cxgb4_tcp_fields }, - { .offset = 0, .offoff = 0, .shift = 6, .mask = 0xF, - .match_off = 8, .match_val = 0x1100, .match_mask = 0xFF00, - .jump = cxgb4_udp_fields }, - { .jump = NULL } + { + /* TCP Jump */ + .sel = { + .off = 0, + .offoff = 0, + .offshift = 6, + .offmask = cpu_to_be16(0x0f00), + }, + .key = { + .off = 8, + .val = cpu_to_be32(0x00060000), + .mask = cpu_to_be32(0x00ff0000), + }, + .jump = cxgb4_tcp_fields, + }, + { + /* UDP Jump */ + .sel = { + .off = 0, + .offoff = 0, + .offshift = 6, + .offmask = cpu_to_be16(0x0f00), + }, + .key = { + .off = 8, + .val = cpu_to_be32(0x00110000), + .mask = cpu_to_be32(0x00ff0000), + }, + .jump = cxgb4_udp_fields, + }, + { .jump = NULL }, };

/* Accept a rule with a jump directly past the 40 Bytes of IPv6 fixed header * to get to transport layer header. */ static const struct cxgb4_next_header cxgb4_ipv6_jumps[] = { - { .offset = 0x28, .offoff = 0, .shift = 0, .mask = 0, - .match_off = 4, .match_val = 0x60000, .match_mask = 0xFF0000, - .jump = cxgb4_tcp_fields }, - { .offset = 0x28, .offoff = 0, .shift = 0, .mask = 0, - .match_off = 4, .match_val = 0x110000, .match_mask = 0xFF0000, - .jump = cxgb4_udp_fields }, - { .jump = NULL } + { + /* TCP Jump */ + .sel = { + .off = 40, + .offoff = 0, + .offshift = 0, + .offmask = 0, + }, + .key = { + .off = 4, + .val = cpu_to_be32(0x00000600), + .mask = cpu_to_be32(0x0000ff00), + }, + .jump = cxgb4_tcp_fields, + }, + { + /* UDP Jump */ + .sel = { + .off = 40, + .offoff = 0, + .offshift = 0, + .offmask = 0, + }, + .key = { + .off = 4, + .val = cpu_to_be32(0x00001100), + .mask = cpu_to_be32(0x0000ff00), + }, + .jump = cxgb4_udp_fields, + }, + { .jump = NULL }, };

struct cxgb4_link {

From: Rahul Lakkireddy rahul.lakkireddy@chelsio.com

[ Upstream commit 1992ded5d111997877a9a25205976d8d03c46814 ]

The data in destination buffer is expected to be be parsed in big endian. So, use the right context.

Fixes following sparse warning: cudbg_lib.c:2041:44: warning: incorrect type in assignment (different base types) cudbg_lib.c:2041:44: expected unsigned long long [usertype] cudbg_lib.c:2041:44: got restricted __be64 [usertype]

Fixes: 736c3b94474e ("cxgb4: collect egress and ingress SGE queue contexts") Signed-off-by: Rahul Lakkireddy rahul.lakkireddy@chelsio.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c b/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c index 5bc58429bb1c4..c91e155c147ca 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c @@ -1987,7 +1987,6 @@ int cudbg_collect_dump_context(struct cudbg_init *pdbg_init, u8 mem_type[CTXT_INGRESS + 1] = { 0 }; struct cudbg_buffer temp_buff = { 0 }; struct cudbg_ch_cntxt *buff; - u64 *dst_off, *src_off; u8 *ctx_buf; u8 i, k; int rc; @@ -2056,8 +2055,11 @@ int cudbg_collect_dump_context(struct cudbg_init *pdbg_init, }

for (j = 0; j < max_ctx_qid; j++) { + __be64 *dst_off; + u64 *src_off; + src_off = (u64 *)(ctx_buf + j * SGE_CTXT_SIZE); - dst_off = (u64 *)buff->data; + dst_off = (__be64 *)buff->data;

/* The data is stored in 64-bit cpu order. Convert it * to big endian before parsing.

From: Misono Tomohiro misono.tomohiro@jp.fujitsu.com

[ Upstream commit 8b97f9922211c44a739c5cbd9502ecbb9f17f6d1 ]

Although it rarely happens, we should call free_capabilities() if error happens after read_capabilities() to free allocated strings.

Fixes: de584afa5e188 ("hwmon driver for ACPI 4.0 power meters") Signed-off-by: Misono Tomohiro misono.tomohiro@jp.fujitsu.com Link: https://lore.kernel.org/r/20200625043242.31175-1-misono.tomohiro@jp.fujitsu.... Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/acpi_power_meter.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c index 2f2fb19669580..2f40da04a9445 100644 --- a/drivers/hwmon/acpi_power_meter.c +++ b/drivers/hwmon/acpi_power_meter.c @@ -896,7 +896,7 @@ static int acpi_power_meter_add(struct acpi_device *device)

res = setup_attrs(resource); if (res) - goto exit_free; + goto exit_free_capability;

resource->hwmon_dev = hwmon_device_register(&device->dev); if (IS_ERR(resource->hwmon_dev)) { @@ -909,6 +909,8 @@ static int acpi_power_meter_add(struct acpi_device *device)

exit_remove: remove_attrs(resource); +exit_free_capability: + free_capabilities(resource); exit_free: kfree(resource); exit:

From: Hou Tao houtao1@huawei.com

[ Upstream commit e7eea44eefbdd5f0345a0a8b80a3ca1c21030d06 ]

Else there will be memory leak if alloc_disk() fails.

Fixes: 6a27b656fc02 ("block: virtio-blk: support multi virt queues per virtio-blk device") Signed-off-by: Hou Tao houtao1@huawei.com Reviewed-by: Stefano Garzarella sgarzare@redhat.com Reviewed-by: Ming Lei ming.lei@redhat.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/virtio_blk.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 9be54e5ef96ae..075523777a4a9 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -882,6 +882,7 @@ static int virtblk_probe(struct virtio_device *vdev) put_disk(vblk->disk); out_free_vq: vdev->config->del_vqs(vdev); + kfree(vblk->vqs); out_free_vblk: kfree(vblk); out_free_index:

From: Christoph Hellwig hch@lst.de

[ Upstream commit 72d447113bb751ded97b2e2c38f886e4a4139082 ]

For private namespaces ns->head_disk is NULL, so add a NULL check before updating the BDI capabilities.

Fixes: b2ce4d90690b ("nvme-multipath: set bdi capabilities once") Reported-by: Avinash M N Avinash.M.N@wdc.com Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: Sagi Grimberg sagi@grimberg.me Reviewed-by: Max Gurtovoy maxg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/multipath.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index 3ad6183c5e6b4..2e63c1106030b 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -532,10 +532,11 @@ void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id) }

if (bdi_cap_stable_pages_required(ns->queue->backing_dev_info)) { - struct backing_dev_info *info = - ns->head->disk->queue->backing_dev_info; + struct gendisk *disk = ns->head->disk;

- info->capabilities |= BDI_CAP_STABLE_WRITES; + if (disk) + disk->queue->backing_dev_info->capabilities |= + BDI_CAP_STABLE_WRITES; } }

From: Wolfram Sang wsa+renesas@sang-engineering.com

[ Upstream commit 597911287fcd13c3a4b4aa3e0a52b33d431e0a8e ]

I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the SMBus 2.0 specs. I don't see a reason to add 1 here. Also, fix the errno to what is suggested for this error.

Fixes: c9bfdc7c16cb ("i2c: mlxcpld: Add support for smbus block read transaction") Signed-off-by: Wolfram Sang wsa+renesas@sang-engineering.com Reviewed-by: Michael Shych michaelsh@mellanox.com Tested-by: Michael Shych michaelsh@mellanox.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-mlxcpld.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c index 2fd717d8dd30e..71d7bae2cbcad 100644 --- a/drivers/i2c/busses/i2c-mlxcpld.c +++ b/drivers/i2c/busses/i2c-mlxcpld.c @@ -337,9 +337,9 @@ static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv) if (priv->smbus_block && (val & MLXCPLD_I2C_SMBUS_BLK_BIT)) { mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_NUM_DAT_REG, &datalen, 1); - if (unlikely(datalen > (I2C_SMBUS_BLOCK_MAX + 1))) { + if (unlikely(datalen > I2C_SMBUS_BLOCK_MAX)) { dev_err(priv->dev, "Incorrect smbus block read message len\n"); - return -E2BIG; + return -EPROTO; } } else { datalen = priv->xfer.data_len;

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

This reverts commit 2d50acd7dbd0682a56968ad9551341d7fc5b6eaf which is commit f0bd62b64016508938df9babe47f65c2c727d25c upstream.

It causes a number of reported issues and a fix for it has not hit Linus's tree yet. Revert this to resolve those problems.

Cc: Alexander Tsoy alexander@tsoy.me Cc: Takashi Iwai tiwai@suse.de Cc: Sasha Levin sashal@kernel.org Cc: Hans de Goede jwrdegoede@fedoraproject.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/usb/card.h | 4 ---- sound/usb/endpoint.c | 43 +++++-------------------------------------- sound/usb/endpoint.h | 1 - sound/usb/pcm.c | 2 -- 4 files changed, 5 insertions(+), 45 deletions(-)

--- a/sound/usb/card.h +++ b/sound/usb/card.h @@ -83,10 +83,6 @@ struct snd_usb_endpoint { dma_addr_t sync_dma; /* DMA address of syncbuf */

unsigned int pipe; /* the data i/o pipe */ - unsigned int framesize[2]; /* small/large frame sizes in samples */ - unsigned int sample_rem; /* remainder from division fs/fps */ - unsigned int sample_accum; /* sample accumulator */ - unsigned int fps; /* frames per second */ unsigned int freqn; /* nominal sampling rate in fs/fps in Q16.16 format */ unsigned int freqm; /* momentary sampling rate in fs/fps in Q16.16 format */ int freqshift; /* how much to shift the feedback value to get Q16.16 */ --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -137,12 +137,12 @@ int snd_usb_endpoint_implicit_feedback_s

/* * For streaming based on information derived from sync endpoints, - * prepare_outbound_urb_sizes() will call slave_next_packet_size() to + * prepare_outbound_urb_sizes() will call next_packet_size() to * determine the number of samples to be sent in the next packet. * - * For implicit feedback, slave_next_packet_size() is unused. + * For implicit feedback, next_packet_size() is unused. */ -int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep) +int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep) { unsigned long flags; int ret; @@ -159,29 +159,6 @@ int snd_usb_endpoint_slave_next_packet_s return ret; }

-/* - * For adaptive and synchronous endpoints, prepare_outbound_urb_sizes() - * will call next_packet_size() to determine the number of samples to be - * sent in the next packet. - */ -int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep) -{ - int ret; - - if (ep->fill_max) - return ep->maxframesize; - - ep->sample_accum += ep->sample_rem; - if (ep->sample_accum >= ep->fps) { - ep->sample_accum -= ep->fps; - ret = ep->framesize[1]; - } else { - ret = ep->framesize[0]; - } - - return ret; -} - static void retire_outbound_urb(struct snd_usb_endpoint *ep, struct snd_urb_ctx *urb_ctx) { @@ -226,8 +203,6 @@ static void prepare_silent_urb(struct sn

if (ctx->packet_size[i]) counts = ctx->packet_size[i]; - else if (ep->sync_master) - counts = snd_usb_endpoint_slave_next_packet_size(ep); else counts = snd_usb_endpoint_next_packet_size(ep);

@@ -912,17 +887,10 @@ int snd_usb_endpoint_set_params(struct s ep->maxpacksize = fmt->maxpacksize; ep->fill_max = !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX);

- if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL) { + if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL) ep->freqn = get_usb_full_speed_rate(rate); - ep->fps = 1000; - } else { + else ep->freqn = get_usb_high_speed_rate(rate); - ep->fps = 8000; - } - - ep->sample_rem = rate % ep->fps; - ep->framesize[0] = rate / ep->fps; - ep->framesize[1] = (rate + (ep->fps - 1)) / ep->fps;

/* calculate the frequency in 16.16 format */ ep->freqm = ep->freqn; @@ -981,7 +949,6 @@ int snd_usb_endpoint_start(struct snd_us ep->active_mask = 0; ep->unlink_mask = 0; ep->phase = 0; - ep->sample_accum = 0;

snd_usb_endpoint_start_quirk(ep);

--- a/sound/usb/endpoint.h +++ b/sound/usb/endpoint.h @@ -28,7 +28,6 @@ void snd_usb_endpoint_release(struct snd void snd_usb_endpoint_free(struct snd_usb_endpoint *ep);

int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep); -int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep); int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep);

void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep, --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -1558,8 +1558,6 @@ static void prepare_playback_urb(struct for (i = 0; i < ctx->packets; i++) { if (ctx->packet_size[i]) counts = ctx->packet_size[i]; - else if (ep->sync_master) - counts = snd_usb_endpoint_slave_next_packet_size(ep); else counts = snd_usb_endpoint_next_packet_size(ep);

From: Paul Aurich paul@darkrain42.org

commit 00dfbc2f9c61185a2e662f27c45a0bb29b2a134f upstream.

Without this:

- persistent handles will only be enabled for per-user tcons if the server advertises the 'Continuous Availabity' capability - resilient handles would never be enabled for per-user tcons

Signed-off-by: Paul Aurich paul@darkrain42.org CC: Stable stable@vger.kernel.org Signed-off-by: Steve French stfrench@microsoft.com Reviewed-by: Aurelien Aptel aaptel@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/cifs/connect.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -4601,6 +4601,8 @@ cifs_construct_tcon(struct cifs_sb_info vol_info->nocase = master_tcon->nocase; vol_info->nohandlecache = master_tcon->nohandlecache; vol_info->local_lease = master_tcon->local_lease; + vol_info->resilient = master_tcon->use_resilient; + vol_info->persistent = master_tcon->use_persistent; vol_info->no_linux_ext = !master_tcon->unix_ext; vol_info->linux_ext = master_tcon->posix_extensions; vol_info->sectype = master_tcon->ses->sectype;

From: Zhang Xiaoxu zhangxiaoxu5@huawei.com

commit 9ffad9263b467efd8f8dc7ae1941a0a655a2bab2 upstream.

When xfstest generic/035, we found the target file was deleted if the rename return -EACESS.

In cifs_rename2, we unlink the positive target dentry if rename failed with EACESS or EEXIST, even if the target dentry is positived before rename. Then the existing file was deleted.

We should just delete the target file which created during the rename.

Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Zhang Xiaoxu zhangxiaoxu5@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Steve French stfrench@microsoft.com Reviewed-by: Aurelien Aptel aaptel@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/cifs/inode.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1783,6 +1783,7 @@ cifs_rename2(struct inode *source_dir, s FILE_UNIX_BASIC_INFO *info_buf_target; unsigned int xid; int rc, tmprc; + bool new_target = d_really_is_negative(target_dentry);

if (flags & ~RENAME_NOREPLACE) return -EINVAL; @@ -1859,8 +1860,13 @@ cifs_rename2(struct inode *source_dir, s */

unlink_target: - /* Try unlinking the target dentry if it's not negative */ - if (d_really_is_positive(target_dentry) && (rc == -EACCES || rc == -EEXIST)) { + /* + * If the target dentry was created during the rename, try + * unlinking it if it's not negative + */ + if (new_target && + d_really_is_positive(target_dentry) && + (rc == -EACCES || rc == -EEXIST)) { if (d_is_dir(target_dentry)) tmprc = cifs_rmdir(target_dir, target_dentry); else

From: Marc Zyngier maz@kernel.org

commit 005c34ae4b44f085120d7f371121ec7ded677761 upstream.

The GIC driver uses a RMW sequence to update the affinity, and relies on the gic_lock_irqsave/gic_unlock_irqrestore sequences to update it atomically.

But these sequences only expand into anything meaningful if the BL_SWITCHER option is selected, which almost never happens.

It also turns out that using a RMW and locks is just as silly, as the GIC distributor supports byte accesses for the GICD_TARGETRn registers, which when used make the update atomic by definition.

Drop the terminally broken code and replace it by a byte write.

Fixes: 04c8b0f82c7d ("irqchip/gic: Make locking a BL_SWITCHER only feature") Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier maz@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/irqchip/irq-gic.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-)

--- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -324,10 +324,8 @@ static int gic_irq_set_vcpu_affinity(str static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, bool force) { - void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3); - unsigned int cpu, shift = (gic_irq(d) % 4) * 8; - u32 val, mask, bit; - unsigned long flags; + void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + gic_irq(d); + unsigned int cpu;

if (!force) cpu = cpumask_any_and(mask_val, cpu_online_mask); @@ -337,13 +335,7 @@ static int gic_set_affinity(struct irq_d if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids) return -EINVAL;

- gic_lock_irqsave(flags); - mask = 0xff << shift; - bit = gic_cpu_map[cpu] << shift; - val = readl_relaxed(reg) & ~mask; - writel_relaxed(val | bit, reg); - gic_unlock_irqrestore(flags); - + writeb_relaxed(gic_cpu_map[cpu], reg); irq_data_update_effective_affinity(d, cpumask_of(cpu));

return IRQ_SET_MASK_OK_DONE;

From: Peter Jones pjones@redhat.com

commit 435d1a471598752446a72ad1201b3c980526d869 upstream.

In most cases, such as CONFIG_ACPI_CUSTOM_DSDT and CONFIG_ACPI_TABLE_UPGRADE, boot-time modifications to firmware tables are tied to specific Kconfig options. Currently this is not the case for modifying the ACPI SSDT via the efivar_ssdt kernel command line option and associated EFI variable.

This patch adds CONFIG_EFI_CUSTOM_SSDT_OVERLAYS, which defaults disabled, in order to allow enabling or disabling that feature during the build.

Cc: stable@vger.kernel.org Signed-off-by: Peter Jones pjones@redhat.com Link: https://lore.kernel.org/r/20200615202408.2242614-1-pjones@redhat.com Signed-off-by: Ard Biesheuvel ardb@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/firmware/efi/Kconfig | 11 +++++++++++ drivers/firmware/efi/efi.c | 2 +- 2 files changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/firmware/efi/Kconfig +++ b/drivers/firmware/efi/Kconfig @@ -179,6 +179,17 @@ config RESET_ATTACK_MITIGATION have been evicted, since otherwise it will trigger even on clean reboots.

+config EFI_CUSTOM_SSDT_OVERLAYS + bool "Load custom ACPI SSDT overlay from an EFI variable" + depends on EFI_VARS && ACPI + default ACPI_TABLE_UPGRADE + help + Allow loading of an ACPI SSDT overlay from an EFI variable specified + by a kernel command line option. + + See Documentation/admin-guide/acpi/ssdt-overlays.rst for more + information. + endmenu

config UEFI_CPER --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -236,7 +236,7 @@ static void generic_ops_unregister(void) efivars_unregister(&generic_efivars); }

-#if IS_ENABLED(CONFIG_ACPI) +#ifdef CONFIG_EFI_CUSTOM_SSDT_OVERLAYS #define EFIVAR_SSDT_NAME_MAX 16 static char efivar_ssdt[EFIVAR_SSDT_NAME_MAX] __initdata; static int __init efivar_ssdt_setup(char *str)