From: Valtteri Koskivuori vkoskiv@gmail.com
[ Upstream commit a7e255ff9fe4d9b8b902023aaf5b7a673786bb50 ]
The S2110 has an additional set of media playback control keys enabled by a hardware toggle button that switches the keys between "Application" and "Player" modes. Toggling "Player" mode just shifts the scancode of each hotkey up by 4.
Add defines for new scancodes, and a keymap and dmi id for the S2110.
Tested on a Fujitsu Lifebook S2110.
Signed-off-by: Valtteri Koskivuori vkoskiv@gmail.com Acked-by: Jonathan Woithe jwoithe@just42.net Link: https://lore.kernel.org/r/20250509184251.713003-1-vkoskiv@gmail.com Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/fujitsu-laptop.c | 33 +++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index ae992ac1ab4ac..6d5300c54a421 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -17,13 +17,13 @@ /* * fujitsu-laptop.c - Fujitsu laptop support, providing access to additional * features made available on a range of Fujitsu laptops including the - * P2xxx/P5xxx/S6xxx/S7xxx series. + * P2xxx/P5xxx/S2xxx/S6xxx/S7xxx series. * * This driver implements a vendor-specific backlight control interface for * Fujitsu laptops and provides support for hotkeys present on certain Fujitsu * laptops. * - * This driver has been tested on a Fujitsu Lifebook S6410, S7020 and + * This driver has been tested on a Fujitsu Lifebook S2110, S6410, S7020 and * P8010. It should work on most P-series and S-series Lifebooks, but * YMMV. * @@ -107,7 +107,11 @@ #define KEY2_CODE 0x411 #define KEY3_CODE 0x412 #define KEY4_CODE 0x413 -#define KEY5_CODE 0x420 +#define KEY5_CODE 0x414 +#define KEY6_CODE 0x415 +#define KEY7_CODE 0x416 +#define KEY8_CODE 0x417 +#define KEY9_CODE 0x420
/* Hotkey ringbuffer limits */ #define MAX_HOTKEY_RINGBUFFER_SIZE 100 @@ -560,7 +564,7 @@ static const struct key_entry keymap_default[] = { { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, { KE_KEY, KEY3_CODE, { KEY_PROG3 } }, { KE_KEY, KEY4_CODE, { KEY_PROG4 } }, - { KE_KEY, KEY5_CODE, { KEY_RFKILL } }, + { KE_KEY, KEY9_CODE, { KEY_RFKILL } }, /* Soft keys read from status flags */ { KE_KEY, FLAG_RFKILL, { KEY_RFKILL } }, { KE_KEY, FLAG_TOUCHPAD_TOGGLE, { KEY_TOUCHPAD_TOGGLE } }, @@ -584,6 +588,18 @@ static const struct key_entry keymap_p8010[] = { { KE_END, 0 } };
+static const struct key_entry keymap_s2110[] = { + { KE_KEY, KEY1_CODE, { KEY_PROG1 } }, /* "A" */ + { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, /* "B" */ + { KE_KEY, KEY3_CODE, { KEY_WWW } }, /* "Internet" */ + { KE_KEY, KEY4_CODE, { KEY_EMAIL } }, /* "E-mail" */ + { KE_KEY, KEY5_CODE, { KEY_STOPCD } }, + { KE_KEY, KEY6_CODE, { KEY_PLAYPAUSE } }, + { KE_KEY, KEY7_CODE, { KEY_PREVIOUSSONG } }, + { KE_KEY, KEY8_CODE, { KEY_NEXTSONG } }, + { KE_END, 0 } +}; + static const struct key_entry *keymap = keymap_default;
static int fujitsu_laptop_dmi_keymap_override(const struct dmi_system_id *id) @@ -621,6 +637,15 @@ static const struct dmi_system_id fujitsu_laptop_dmi_table[] = { }, .driver_data = (void *)keymap_p8010 }, + { + .callback = fujitsu_laptop_dmi_keymap_override, + .ident = "Fujitsu LifeBook S2110", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S2110"), + }, + .driver_data = (void *)keymap_s2110 + }, {} };
From: Kailang Yang kailang@realtek.com
[ Upstream commit 5ad8a4ddc45048bc2fe23b75357b6bf185db004f ]
This board need to shutdown Class-D amp to avoid EMI issue. Restore the Auto-Mute mode item will off pin control when Auto-mute mode was enable.
Signed-off-by: Kailang Yang kailang@realtek.com Links: https://lore.kernel.org/ee8bbe5236464c369719d96269ba8ef8@realtek.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_realtek.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index db72c5fce9d18..88f0180e79f65 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6812,7 +6812,10 @@ static void alc256_fixup_chromebook(struct hda_codec *codec,
switch (action) { case HDA_FIXUP_ACT_PRE_PROBE: - spec->gen.suppress_auto_mute = 1; + if (codec->core.subsystem_id == 0x10280d76) + spec->gen.suppress_auto_mute = 0; + else + spec->gen.suppress_auto_mute = 1; spec->gen.suppress_auto_mic = 1; spec->en_3kpull_low = false; break;
From: Mark Pearson mpearson-lenovo@squebb.ca
[ Upstream commit 29e4e6b4235fefa5930affb531fe449cac330a72 ]
If user modifies the battery charge threshold an ACPI event is generated. Confirmed with Lenovo FW team this is only generated on user event. As no action is needed, ignore the event and prevent spurious kernel logs.
Reported-by: Derek Barbosa debarbos@redhat.com Closes: https://lore.kernel.org/platform-driver-x86/7e9a1c47-5d9c-4978-af20-3949d53f... Signed-off-by: Mark Pearson mpearson-lenovo@squebb.ca Reviewed-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Armin Wolf W_Armin@gmx.de Link: https://lore.kernel.org/r/20250517023348.2962591-1-mpearson-lenovo@squebb.ca Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/thinkpad_acpi.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index dea40da867552..99d6c72892f7c 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -232,6 +232,7 @@ enum tpacpi_hkey_event_t { /* Thermal events */ TP_HKEY_EV_ALARM_BAT_HOT = 0x6011, /* battery too hot */ TP_HKEY_EV_ALARM_BAT_XHOT = 0x6012, /* battery critically hot */ + TP_HKEY_EV_ALARM_BAT_LIM_CHANGE = 0x6013, /* battery charge limit changed*/ TP_HKEY_EV_ALARM_SENSOR_HOT = 0x6021, /* sensor too hot */ TP_HKEY_EV_ALARM_SENSOR_XHOT = 0x6022, /* sensor critically hot */ TP_HKEY_EV_THM_TABLE_CHANGED = 0x6030, /* windows; thermal table changed */ @@ -3778,6 +3779,10 @@ static bool hotkey_notify_6xxx(const u32 hkey, bool *send_acpi_ev) pr_alert("THERMAL EMERGENCY: battery is extremely hot!\n"); /* recommended action: immediate sleep/hibernate */ break; + case TP_HKEY_EV_ALARM_BAT_LIM_CHANGE: + pr_debug("Battery Info: battery charge threshold changed\n"); + /* User changed charging threshold. No action needed */ + return true; case TP_HKEY_EV_ALARM_SENSOR_HOT: pr_crit("THERMAL ALARM: a sensor reports something is too hot!\n"); /* recommended action: warn user through gui, that */
From: Nishanth Menon nm@ti.com
[ Upstream commit 50980d8da71a0c2e045e85bba93c0099ab73a209 ]
Using random mac address is not an error since the driver continues to function, it should be informative that the system has not assigned a MAC address. This is inline with other drivers such as ax88796c, dm9051 etc. Drop the error level to info level.
Signed-off-by: Nishanth Menon nm@ti.com Reviewed-by: Simon Horman horms@kernel.org Reviewed-by: Roger Quadros rogerq@kernel.org Link: https://patch.msgid.link/20250516122655.442808-1-nm@ti.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/ti/am65-cpsw-nuss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c index a21e7c0afbfdc..61788a43cb861 100644 --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c @@ -2699,7 +2699,7 @@ static int am65_cpsw_nuss_init_slave_ports(struct am65_cpsw_common *common) port->slave.mac_addr); if (!is_valid_ether_addr(port->slave.mac_addr)) { eth_random_addr(port->slave.mac_addr); - dev_err(dev, "Use random MAC address\n"); + dev_info(dev, "Use random MAC address\n"); } }
From: Namjae Jeon linkinjeon@kernel.org
[ Upstream commit 10379171f346e6f61d30d9949500a8de4336444a ]
The list_first_entry() macro never returns NULL. If the list is empty then it returns an invalid pointer. Use list_first_entry_or_null() to check if the list is empty.
Reported-by: kernel test robot lkp@intel.com Reported-by: Dan Carpenter dan.carpenter@linaro.org Closes: https://lore.kernel.org/r/202505080231.7OXwq4Te-lkp@intel.com/ Signed-off-by: Namjae Jeon linkinjeon@kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/server/oplock.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c index 03f606afad93a..d7a8a580d0136 100644 --- a/fs/smb/server/oplock.c +++ b/fs/smb/server/oplock.c @@ -146,12 +146,9 @@ static struct oplock_info *opinfo_get_list(struct ksmbd_inode *ci) { struct oplock_info *opinfo;
- if (list_empty(&ci->m_op_list)) - return NULL; - down_read(&ci->m_lock); - opinfo = list_first_entry(&ci->m_op_list, struct oplock_info, - op_entry); + opinfo = list_first_entry_or_null(&ci->m_op_list, struct oplock_info, + op_entry); if (opinfo) { if (opinfo->conn == NULL || !atomic_inc_not_zero(&opinfo->refcount))
linux-stable-mirror@lists.linaro.org
-
Sasha Levin