In general the delay should be added by the PHY instead of the MAC, and this improves network stability on some boards which seem to need different delay.
Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS") Cc: stable@vger.kernel.org # 6.6+ Signed-off-by: Tianling Shen cnsztl@gmail.com --- arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 3 +-- arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts | 1 + arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi | 1 - 3 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts index 67c246ad8b8c..ec2ce894da1f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts @@ -17,8 +17,7 @@ / {
&gmac2io { phy-handle = <&yt8531c>; - tx_delay = <0x19>; - rx_delay = <0x05>; + phy-mode = "rgmii-id"; status = "okay";
mdio { diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts index 324a8e951f7e..846b931e16d2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts @@ -15,6 +15,7 @@ / {
&gmac2io { phy-handle = <&rtl8211e>; + phy-mode = "rgmii"; tx_delay = <0x24>; rx_delay = <0x18>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi index 4f193704e5dc..09508e324a28 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi @@ -109,7 +109,6 @@ &gmac2io { assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; clock_in_out = "input"; - phy-mode = "rgmii"; phy-supply = <&vcc_io>; pinctrl-0 = <&rgmiim1_pins>; pinctrl-names = "default";
Hello Tianling,
Thanks for the patch. Please, see a comment below.
On 2025-01-19 10:11, Tianling Shen wrote:
In general the delay should be added by the PHY instead of the MAC, and this improves network stability on some boards which seem to need different delay.
Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS") Cc: stable@vger.kernel.org # 6.6+ Signed-off-by: Tianling Shen cnsztl@gmail.com
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 3 +-- arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts | 1 + arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi | 1 - 3 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts index 67c246ad8b8c..ec2ce894da1f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts @@ -17,8 +17,7 @@ / {
&gmac2io { phy-handle = <&yt8531c>;
- tx_delay = <0x19>;
- rx_delay = <0x05>;
- phy-mode = "rgmii-id";
Shouldn't the "tx_delay" and "rx_delay" DT parameters be converted into the "tx-internal-delay-ps" and "rx-internal-delay-ps" parameters, respectively, so the Motorcomm PHY driver can pick them up and actually configure the internal PHY delays?
status = "okay";
mdio { diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts index 324a8e951f7e..846b931e16d2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts @@ -15,6 +15,7 @@ / {
&gmac2io { phy-handle = <&rtl8211e>;
- phy-mode = "rgmii"; tx_delay = <0x24>; rx_delay = <0x18>; status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi index 4f193704e5dc..09508e324a28 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi @@ -109,7 +109,6 @@ &gmac2io { assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; clock_in_out = "input";
- phy-mode = "rgmii"; phy-supply = <&vcc_io>; pinctrl-0 = <&rgmiim1_pins>; pinctrl-names = "default";
Hi Dragan,
On 2025/1/19 17:54, Dragan Simic wrote:
Hello Tianling,
Thanks for the patch. Please, see a comment below.
On 2025-01-19 10:11, Tianling Shen wrote:
In general the delay should be added by the PHY instead of the MAC, and this improves network stability on some boards which seem to need different delay.
Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS") Cc: stable@vger.kernel.org # 6.6+ Signed-off-by: Tianling Shen cnsztl@gmail.com
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 3 +-- arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts | 1 + arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi | 1 - 3 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts index 67c246ad8b8c..ec2ce894da1f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts @@ -17,8 +17,7 @@ / {
&gmac2io { phy-handle = <&yt8531c>; - tx_delay = <0x19>; - rx_delay = <0x05>; + phy-mode = "rgmii-id";
Shouldn't the "tx_delay" and "rx_delay" DT parameters be converted into the "tx-internal-delay-ps" and "rx-internal-delay-ps" parameters, respectively, so the Motorcomm PHY driver can pick them up and actually configure the internal PHY delays?
The documentation[1] says "{t,r}x-internal-delay-ps" default to 1950 and that value already works fine on my board.
1. https://www.kernel.org/doc/Documentation/devicetree/bindings/net/motorcomm%2...
Thanks, Tianling.
status = "okay";
mdio { diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts index 324a8e951f7e..846b931e16d2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts @@ -15,6 +15,7 @@ / {
&gmac2io { phy-handle = <&rtl8211e>; + phy-mode = "rgmii"; tx_delay = <0x24>; rx_delay = <0x18>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi index 4f193704e5dc..09508e324a28 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi @@ -109,7 +109,6 @@ &gmac2io { assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; clock_in_out = "input"; - phy-mode = "rgmii"; phy-supply = <&vcc_io>; pinctrl-0 = <&rgmiim1_pins>; pinctrl-names = "default";
On 2025-01-19 12:15, Tianling Shen wrote:
On 2025/1/19 17:54, Dragan Simic wrote:
Thanks for the patch. Please, see a comment below.
On 2025-01-19 10:11, Tianling Shen wrote:
In general the delay should be added by the PHY instead of the MAC, and this improves network stability on some boards which seem to need different delay.
Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS") Cc: stable@vger.kernel.org # 6.6+ Signed-off-by: Tianling Shen cnsztl@gmail.com
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 3 +-- arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts | 1 + arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi | 1 - 3 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts index 67c246ad8b8c..ec2ce894da1f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts @@ -17,8 +17,7 @@ / {
&gmac2io { phy-handle = <&yt8531c>; - tx_delay = <0x19>; - rx_delay = <0x05>; + phy-mode = "rgmii-id";
Shouldn't the "tx_delay" and "rx_delay" DT parameters be converted into the "tx-internal-delay-ps" and "rx-internal-delay-ps" parameters, respectively, so the Motorcomm PHY driver can pick them up and actually configure the internal PHY delays?
The documentation[1] says "{t,r}x-internal-delay-ps" default to 1950 and that value already works fine on my board.
https://www.kernel.org/doc/Documentation/devicetree/bindings/net/motorcomm%2...
I see, but those values differ from the values found in the "tx_delay" and "rx_delay" DT parameters, so I think this patch should be tested with at least one more Orange Pi R1 Plus LTS board, to make sure it's all still fine.
status = "okay";
mdio { diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts index 324a8e951f7e..846b931e16d2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts @@ -15,6 +15,7 @@ / {
&gmac2io { phy-handle = <&rtl8211e>; + phy-mode = "rgmii"; tx_delay = <0x24>; rx_delay = <0x18>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi index 4f193704e5dc..09508e324a28 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi @@ -109,7 +109,6 @@ &gmac2io { assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; clock_in_out = "input"; - phy-mode = "rgmii"; phy-supply = <&vcc_io>; pinctrl-0 = <&rgmiim1_pins>; pinctrl-names = "default";
On 2025/1/19 19:36, Dragan Simic wrote:
On 2025-01-19 12:15, Tianling Shen wrote:
On 2025/1/19 17:54, Dragan Simic wrote:
Thanks for the patch. Please, see a comment below.
On 2025-01-19 10:11, Tianling Shen wrote:
In general the delay should be added by the PHY instead of the MAC, and this improves network stability on some boards which seem to need different delay.
Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS") Cc: stable@vger.kernel.org # 6.6+ Signed-off-by: Tianling Shen cnsztl@gmail.com
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 3 +-- arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts | 1 + arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi | 1 - 3 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts index 67c246ad8b8c..ec2ce894da1f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts @@ -17,8 +17,7 @@ / {
&gmac2io { phy-handle = <&yt8531c>; - tx_delay = <0x19>; - rx_delay = <0x05>; + phy-mode = "rgmii-id";
Shouldn't the "tx_delay" and "rx_delay" DT parameters be converted into the "tx-internal-delay-ps" and "rx-internal-delay-ps" parameters, respectively, so the Motorcomm PHY driver can pick them up and actually configure the internal PHY delays?
The documentation[1] says "{t,r}x-internal-delay-ps" default to 1950 and that value already works fine on my board.
motorcomm%2Cyt8xxx.yaml
I see, but those values differ from the values found in the "tx_delay" and "rx_delay" DT parameters, so I think this patch should be tested with at least one more Orange Pi R1 Plus LTS board, to make sure it's all still fine.
This patch has been tested on 2 boards, and we will do more tests in next week.
Thanks, Tianling.
status = "okay";
mdio { diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts index 324a8e951f7e..846b931e16d2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts @@ -15,6 +15,7 @@ / {
&gmac2io { phy-handle = <&rtl8211e>; + phy-mode = "rgmii"; tx_delay = <0x24>; rx_delay = <0x18>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi index 4f193704e5dc..09508e324a28 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi @@ -109,7 +109,6 @@ &gmac2io { assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; clock_in_out = "input"; - phy-mode = "rgmii"; phy-supply = <&vcc_io>; pinctrl-0 = <&rgmiim1_pins>; pinctrl-names = "default";
On 2025/1/19 23:48, Tianling Shen wrote:
On 2025/1/19 19:36, Dragan Simic wrote:
On 2025-01-19 12:15, Tianling Shen wrote:
On 2025/1/19 17:54, Dragan Simic wrote:
Thanks for the patch. Please, see a comment below.
On 2025-01-19 10:11, Tianling Shen wrote:
In general the delay should be added by the PHY instead of the MAC, and this improves network stability on some boards which seem to need different delay.
Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS") Cc: stable@vger.kernel.org # 6.6+ Signed-off-by: Tianling Shen cnsztl@gmail.com
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 3 +-- arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts | 1 + arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi | 1 - 3 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts index 67c246ad8b8c..ec2ce894da1f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts @@ -17,8 +17,7 @@ / {
&gmac2io { phy-handle = <&yt8531c>; - tx_delay = <0x19>; - rx_delay = <0x05>; + phy-mode = "rgmii-id";
Shouldn't the "tx_delay" and "rx_delay" DT parameters be converted into the "tx-internal-delay-ps" and "rx-internal-delay-ps" parameters, respectively, so the Motorcomm PHY driver can pick them up and actually configure the internal PHY delays?
The documentation[1] says "{t,r}x-internal-delay-ps" default to 1950 and that value already works fine on my board.
motorcomm%2Cyt8xxx.yaml
I see, but those values differ from the values found in the "tx_delay" and "rx_delay" DT parameters, so I think this patch should be tested with at least one more Orange Pi R1 Plus LTS board, to make sure it's all still fine.
This patch has been tested on 2 boards, and we will do more tests in next week.
Managed to test on another board and looks so far so good. (Working network connection, no packet drop)
Thanks, Tianling.
Thanks, Tianling.
status = "okay";
mdio { diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts index 324a8e951f7e..846b931e16d2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts @@ -15,6 +15,7 @@ / {
&gmac2io { phy-handle = <&rtl8211e>; + phy-mode = "rgmii"; tx_delay = <0x24>; rx_delay = <0x18>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi index 4f193704e5dc..09508e324a28 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi @@ -109,7 +109,6 @@ &gmac2io { assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; clock_in_out = "input"; - phy-mode = "rgmii"; phy-supply = <&vcc_io>; pinctrl-0 = <&rgmiim1_pins>; pinctrl-names = "default";
Hello Tianling,
On 2025-01-24 07:28, Tianling Shen wrote:
On 2025/1/19 23:48, Tianling Shen wrote:
On 2025/1/19 19:36, Dragan Simic wrote:
On 2025-01-19 12:15, Tianling Shen wrote:
On 2025/1/19 17:54, Dragan Simic wrote:
Thanks for the patch. Please, see a comment below.
On 2025-01-19 10:11, Tianling Shen wrote:
In general the delay should be added by the PHY instead of the MAC, and this improves network stability on some boards which seem to need different delay.
Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS") Cc: stable@vger.kernel.org # 6.6+ Signed-off-by: Tianling Shen cnsztl@gmail.com
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 3 +-- arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts | 1
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi | 1
3 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts index 67c246ad8b8c..ec2ce894da1f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts @@ -17,8 +17,7 @@ / {
&gmac2io { phy-handle = <&yt8531c>; - tx_delay = <0x19>; - rx_delay = <0x05>; + phy-mode = "rgmii-id";
Shouldn't the "tx_delay" and "rx_delay" DT parameters be converted into the "tx-internal-delay-ps" and "rx-internal-delay-ps" parameters, respectively, so the Motorcomm PHY driver can pick them up and actually configure the internal PHY delays?
The documentation[1] says "{t,r}x-internal-delay-ps" default to 1950 and that value already works fine on my board.
motorcomm%2Cyt8xxx.yaml
I see, but those values differ from the values found in the "tx_delay" and "rx_delay" DT parameters, so I think this patch should be tested with at least one more Orange Pi R1 Plus LTS board, to make sure it's all still fine.
This patch has been tested on 2 boards, and we will do more tests in next week.
Managed to test on another board and looks so far so good. (Working network connection, no packet drop)
Sounds good to me, thanks for the additional testing.
status = "okay";
mdio { diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts index 324a8e951f7e..846b931e16d2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts @@ -15,6 +15,7 @@ / {
&gmac2io { phy-handle = <&rtl8211e>; + phy-mode = "rgmii"; tx_delay = <0x24>; rx_delay = <0x18>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi index 4f193704e5dc..09508e324a28 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi @@ -109,7 +109,6 @@ &gmac2io { assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; clock_in_out = "input"; - phy-mode = "rgmii"; phy-supply = <&vcc_io>; pinctrl-0 = <&rgmiim1_pins>; pinctrl-names = "default";
&gmac2io { phy-handle = <&yt8531c>;
- tx_delay = <0x19>;
- rx_delay = <0x05>;
- phy-mode = "rgmii-id";
Shouldn't the "tx_delay" and "rx_delay" DT parameters be converted into the "tx-internal-delay-ps" and "rx-internal-delay-ps" parameters, respectively, so the Motorcomm PHY driver can pick them up and actually configure the internal PHY delays?
Maybe.
One problem is that tx_delay and rx_delay are really bad DT bindings. They are basically values to be poked into a registers, with no explanation of what they mean. Maybe 0x19 means 2ns? If so, that is exactly what the PHY will do with rgmii-id, and you don't need any additional properties.
The fact testing suggests this works does suggest these delay values are around 2ns, so there is probably no need for {rt}x-internal-delay-ps.
In general, i always suggest the PHY does the delay, just so that we try to make all boards act in the same way. The fact this also removes the use of these terrible tx_delay and rx_delay makes this patch even better, if it can be shown to be reliable.
Andrew
linux-stable-mirror@lists.linaro.org
-
Andrew Lunn -
Dragan Simic -
Tianling Shen